Electronics technician jobs in Swansea, MA - 496 jobs

Job Title: Field Service Technician Coverage area: Greater Boston area Department: Service (Operations) Reports to: Service Manager FLSA Status: Hourly, Non - Exempt SUMMARY: The Field Service Technician provides customer service in person and/or by telephone to customers in and around the greater Boston area. Technicians will also help fulfill the needs of the maintenance schedule when needed by performing preventative maintenance on parking access, as well as software and/or hardware. Works with upper-level support to troubleshoot/setup/configure car access systems to include LAN (Local Area Networks). Effectively understands and troubleshoots basic setup of credit card configuration within the PARCS (parking access & revenue control system) network. ESSENTIAL DUTIES AND RESPONSIBILITIES: Perform field repairs on parking access system and building access systems, software and/or hardware related Troubleshoot and correct problems on devices/equipment, down to board level, low voltage Correct/fixes; minor to complex software issues on parking/access systems Understand and troubleshoot the entire setup of a SKIDATA network (LAN) Properly identifies all network devices on a LAN (router, modem, switch etc.) Can properly use handheld devices like, but not limited to, multi meter, Network tester, toner, etc. Understand basic relay logic Works with upper-level support to setup/configure firewall, router, and other network devices Provides effective customer service, to internal and external customers Properly identifies when higher level support is needed. Work closely with peers and support team to ensure customer expectations are met Effectively execute troubleshooting instructions from higher level support Properly maintain vehicle status and maintenance, as required Properly maintains his/her inventory levels, by properly transacting in ERP (SNOW) system Communicates effectively with service coordinator, advisors, and service management team Responsible for transactions for assigned work orders (WOs) in ERP system on a per WO basis (parts and labor), also to include maintenance checklist, as required by existing processes Perform monthly preventative maintenance - scheduled inspection, cleaning, lubricating, and adjusting of the equipment Other duties, as assigned QUALIFICATIONS: This is an experienced position within the Service Department. To perform this job successfully, an individual must be able to perform each essential function satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required: Must be at least 21 years old, with a valid driver's license; have and maintain a driving record clean of any major or numerous violations Must be able to drive to field / customer locations to perform field work Working knowledge of Windows Server 2008/2012/2016, SQL, Windows OS 7, 10 and above, and network firewall configurations Must possess aptitude to learn new technologies The ability to work independently all while keeping others informed of your processes and progress via multiple avenues - including ERP System, email, and/or phone Proficiency in Microsoft Project, Excel, and PowerPoint Must be able to complete SKIDATA technical certified training courses - within 24 months; or has completed required certified courses in the technical career track. Specific product/equipment and software training supplied by SKIDATA EDUCATION and/or EXPERIENCE: High school diploma or general education degree (GED) or equivalent and two (2) years of training/experience in related field required, or equivalent combination of education and experience. Good skills in the use of hand tools required - experience using ERP software a plus. CERTIFICATES, LICENSES, REGISTRATIONS: Valid Driver's License, in state of residence. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is frequently required to drive motor vehicle; sit; stand; walk; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; stoop; kneel; crouch; or crawl; and talk; or hear. The employee must frequently lift and/or move more than 50 pounds. Specific vision abilities required by this job include close vision, distance vision, and depth perception; standing for long periods of time; climbing ladders, stairs, ramps; handling and assembling small parts, use of a variety of tools and equipment such as power construction equipment, measuring devices, power tools, and testing equipment including oscilloscopes, ammeters, and computers/digital equipment. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this job, the employee is frequently exposed to moving mechanical parts and/or automobiles. The employee is occasionally exposed to wet and/or humid conditions; fumes or airborne particles; toxic or caustic chemicals; outside weather conditions; risk of electrical shock. The noise level in the work environment is usually moderate to occasionally loud. TRAVEL: There may be occasional travel outside of the employee's regular region; this travel may be by airplane or vehicle and will be planned with as much advanced notice as possible. SCHEDULE: Monday through Friday - Available 8am - 5pm. Saturday and Sundays - Possible with advance notification. The general hours of the position are Monday through Friday (8 a.m. to 5 p.m.); however, the expectations are that you be flexible to work as the needs of the business require. This may require occasional overtime; working on Saturday/weekends; and/or before or after the hours of 8 a.m. to 5 p.m. Technicians are required to be on an on-call rotation for one week per month. Supervisor will give as much advance notice as possible and try to evenly distribute hours based on business needs among the employees with skills, knowledge and ability for the work that needs to be accomplished. SKIDATA Inc. is an equal opportunity employer. All qualified applicants for employment will be considered without regard to race, color, religion, sex, gender identity, sexual orientation, national origin, status as an individual with a disability, veteran status, or any other basis protected by federal, state, or local law. EEO M / F / D / V

Title: Electrical-Mechanical Specialist Type: Full-Time Shifts Available: 2nd Shift - 2:50 PM to 11:00 PM (Ball Plant II & III) 3rd Shift - 10:50 PM to 7:00 AM, Sunday start (Ball Plant II, III & Custom) WECC Shift - Fri 10:50 PM-11:00 AM & Sun 10:50 AM-11:00 PM + 1-2 weekday shifts (Ball Plant II) Benefits start day 1: Medical, PTO, paid holidays, 401(k) match, annual incentive eligibility, associate discounts, and more. About the Role: We are hiring an Electrical-Mechanical Specialist to support our high-tech manufacturing operations. In this role, you'll work independently and collaboratively to analyze, troubleshoot, and maintain cutting-edge production equipment. You'll also support continuous improvement and equipment reliability initiatives across the plant. Key Responsibilities Independently troubleshoot, repair, and rebuild complex electrical/electronic, hydraulic, and pneumatic systems Perform preventive and predictive maintenance per schedules Plan and execute tasks efficiently to minimize production downtime Assist engineering with equipment modifications and project implementations Calibrate and repair various instrumentation and measuring equipment Record maintenance activities using our computerized maintenance system What You Bring High school diploma required; vocational training or associate degree in electrical/electronic disciplines preferred Minimum of 3 years; experience in an industrial electrical maintenance role (or 7+ years of experience without formal post-secondary education) Successful completion of a skills assessment and interview process Must have own trade tools Special Credentials & Skills Expertise in installing, troubleshooting, and maintaining electrical and mechanical systems Knowledge of AC/DC circuits, PLCs, instrumentation, HVAC, plumbing, and piping Proficient in reading schematics, blueprints, and using measurement tools Familiar with safety protocols including Lock Out-Tag Out and NFPA 70E Comfortable using cranes, hoists, power tools, and diagnostic equipment Strong communication and interpersonal skills Preferred Certifications (Not Required) MA Journeyman or Master Electrician License MA 2nd Class Fireman License Universal Refrigeration License Class A or B CDL Forklift / Man-lift Certification

3rd shift 11pm-7am Repair and maintain production machines and building related electrical and mechanical systems. Essential Job Duties and Responsibilities Repairs and maintains, (in accordance with diagrams, sketches, operation manuals and manufacturer's recommendations) production machines, conveyor systems and equipment, using hand tools and precision measuring and testing instruments Troubleshoots problems of building mechanical systems and related production machinery (compressors, injection molding machines, thermolators, dryers and related manufacturing accessory equipment) Preventive maintenance of all molding and production related equipment Performs routine maintenance tasks in the molding areas (i.e., conveyors, grinders and mechanical repairs/replacements on machines) The supervisor may assign other tasks as needed Practice good housekeeping and appropriate measures to prevent pollution or other negative impacts on the environment Minimum Requirements High School Diploma or equivalent 2-5 years manufacturing mechanical maintenance experience Self-starter and motivated individual who is able to work with minimal supervision Experience with hydraulic equipment and PLC troubleshooting Use of hand tools and precision measuring/testing instruments Preferred Requirements Forklift experience Experience in maintenance of injection molding machines Experience in an ISO certified manufacturing facility Working Conditions and Physical Demands Manufacturing and warehouse environment. Frequent stooping and bending. Regularly required to sit or stand and move about the facility. Physical ability to lift up to 70 lbs. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed above are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.

Job SummaryRDSI has a planned opening for an entry-to-mid level Electronic Technician in their Pawcatuck, CT location. The successful candidate will initially produce the lighting kits and light assemblies, along with associated parts management support, and longer term provide technical support for development and legacy Navy communication systems, Electronic Warfare, and Bridge Light programs. Responsibilities Fabricate parts Assemble products and sub-assemblies Manage parts inventory Review schematic diagrams Able to handle multiple tasks concurrently Troubleshoot and repair circuit boards and electronics Perform electrical analysis and testing Support testing of communications and antenna systems Qualifications Able to read and comprehend wiring diagrams and schematics Solder proficiently Install wiring and connectors Familiar with Navy Systems Requirements Associates degree in technical field or equivalent Must be familiar in the use of Microsoft Office Outlook, Word, Excel and Power Point Good oral and written skills Must possess good interpersonal skills The candidate must be a self-starter and be able to work independently with a minimum of supervision Familiarity with LabView software a plus Familiarity with Fibre installation a plus Must have or be eligible for a Secret Clearance Applicants selected will be subject to a security investigation and must meet eligibility requirements for access to classified information.RDSI is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law.

TSC is seeking an entry level Elecrtomechanical Technician with experience or interest in cable assemblies, electronic components, and precision mechanical work to support work in our Plymouth, MA location. The ideal candidate is hands-on, detail-oriented, and knowledgeable about manufacturing best practices within an ISO9000-compliant environment. Key Responsibilities Manufacture and assemble electronic assemblies, including: Soldering (surface-mount and through-hole) Crimping a wide range of terminals and connectors Heat-shrink applications and harness routing Work with printed wiring assemblies (PWAs) and printed circuit boards (PCBs), including component installation, inspection, and rework. Fabricate and modify sheet metal components using shop tools. Operate machinery such as but not limited to: drill press, precision hand tools, measurement and inspection equipment (calipers, micrometers, torque tools), torque fasteners and mechanical assemblies to specified values using calibrated tools. Follow all manufacturing best practices, workmanship standards, and engineering documentation (schematics, drawings, work instructions, travelers). Ensure work adheres to ISO9000 quality management procedures. Conduct in-process inspections and maintain accurate production records. Collaborate with engineering, quality, and production teams to support continuous improvements. Required Qualifications 1-2 years of experience in a manufacturing or an electronics assembly role (or equivalent hands-on background) US Citizenship and the ability to obtain and maintain a government security clearance. Proficiency in electrical cable assembly and soldering (IPC-620 or IPC-610 certification is a plus), crimping and use of manual/automated crimp tools Efficient in PCB handling and ESD-safe work practices Strong mechanical aptitude and ability to read engineering drawings. Understanding of ISO9000 or similar quality standards. Ability to work independently, manage multiple tasks, and meet production deadlines. Strong attention to detail, quality, and safety. TSC Benefits: TSC offers a stable work environment, a competitive salary, and a comprehensive benefit package; including Employee Stock Option Plan (ESOP) participation, 401k Plan, Flexible Work Schedules, Tuition Reimbursement, Co-Sponsored Health Plan, Paid Leave and much more. TSC is a growing organization with unlimited opportunity! Applying to TSC: Only those candidates invited for an interview will be contacted. Employment at TSC is contingent upon the successful completion of a comprehensive background check, security investigation, and a drug screening. This contractor and subcontractor shall abide by the requirements of 41 CFR 60-1.4(a), 60-300.5(a) and 60-741.5(a). These regulations prohibit discrimination against qualified individuals based on their status as protected veterans or individuals with disabilities, and prohibit discrimination against all individuals based on their race, color, religion, sex, sexual orientation, gender identity, national origin, or for inquiring about, discussing, or disclosing information about compensation. Moreover, these regulations require that covered prime contractors and subcontractors take affirmative action to employ and advance in employment individuals without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Electronics Technician KiddeFenwal, LLC KiddeFenwal is the global market leader in designing and manufacturing innovative industrial and commercial fire suppression systems and safety controls. Our proprietary, fully certified offerings save lives, protect property, and minimize business interruption. Our brands-Kidde Fire Systems and Kidde Fire Protection-deliver highly engineered fire suppression, detection, and control systems across industrial, commercial, and marine sectors. Fenwal Controls supports OEMs with gas ignition, temperature control, and overheat detection products. Headquartered in Ashland, Massachusetts, KiddeFenwal operates globally, with facilities in the U.S., United Kingdom (KFI-UK), and India (KTI-India). Learn more at ******************* Our Purpose We protect lives, livelihoods, and iconic assets through innovative solutions, strong partnerships, and exceptional customer experiences. Built on a foundation of integrity and safety, we drive results with speed and excellence while fostering innovation and teamwork. Position Summary The key responsibilities include Work under limited supervision to provide technical support and task ownership to electrical engineers on a variety of engineering tasks. Execution of functional and environmental testing of electronic boards/control panel and associated equipment. Perform fault isolation testing on systems and equipment and assist engineers in determining methods or actions to remedy malfunctions. Perform soldering, wiring, fixture setup as required. Work with regulatory engineers for lab qualification program for regulatory agency testing Documentation of results and tracking of units under test (UUTs) using internally developed practices and procedures. Maintain inventory of piece parts that support the delivery of rapid prototypes. Collaborate with colleagues to maintain and manage inventory of key electronic equipment and assemblies. Participate in team meetings, providing accurate status, raising issues and risks. Actively participate in, and maintain strict compliance to, all company Policies and Procedures. All other duties as assigned This position reports to the Sr. Engineering Manager and involves collaboration with engineering teams. Experience and Competencies Experience with execution of functional and environmental testing of electronic devices. Hands-on experience with component-level troubleshooting of analog and digital circuits. Proficient in use and operation of electronic lab tools/equipment such as oscilloscopes, power meters, frequency counters, multimeters, temperature/environmental chambers, and spectrum analyzers. Experience documenting test procedures and communicating results to internal customers and regulatory agencies for product certification Able to read and interpret engineering drawings, electrical schematics, test data, test procedures and specifications Able to maintain and update equipment calibration records, test setup details, test records for agency review Able to quickly adjust to shifting priorities, perform and deliver in a fast-paced environment Self-motivated team-oriented individual who has the ability to work efficiently and safely in a laboratory environment with clear direction and minimal supervision Basic Qualifications Min. AA/AS degree (or other 2-year post high school training) Min. 3 years of relevant experience Preferred Qualifications/Competencies Experience documenting test procedures and communicating results to internal customers. Experience in understanding/developing programming / test fixtures Solid written and verbal communication skills Proficient in use of Microsoft Word, Outlook, and Excel software. Experience with test facility and equipment maintenance and management. Experience with use of Data Acquisition Equipment, i.e. National Instruments Lab View. Familiarity with C programming language and PIC family of microprocessors. Experience working with non-US based teams and suppliers. Sensitivity to cultural biases and understanding the communication practices needed to create successful partnerships in and open and supportive environment. KiddeFenwal, LLC. is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other federally protected class.

This individual resides in production and has oversight responsibility for the integrity and execution of product test, troubleshooting and repair in a defined section of David Clark manufacturing. This job requires hands-on involvement with all aspects of the production process; including active participation in methods of manufacture with the goal of improving productivity while maintaining world-class quality standards. This individual will also be involved in the repair process relative to Customer Returned active ANR, wireless ground support and Digital Intercom product lines. PRIMARY DUTIES AND RESPONSIBILITIES : Coordinate and maintain oversight of product flow through test and products returned for repair. This includes, but is not limited to, Disassembly of customer returned products, Diagnosis of failure, Repair and reassembly of the repaired product Test and QA audit of the repair prior to return to the customer. Troubleshoot down the component level, sub-assemblies or final product that have been returned seeking the most efficient and cost effective means to identify and repair faults. Initiate timely corrective action based on troubleshooting findings. Interface with Engineering to improve test philosophies, fixtures and procedures. Interface with Q.A., Purchasing, Production Control and Engineering as appropriate when seeking remedy and resultant corrective action. Perform product testing when appropriate. Participate in the design review and conceptual development of new testers for new and existing products. Critique new or revised test procedures and train test personnel on new procedures. Participate in the development and implementation of processes and method changes that improve productivity and product quality. MINIMUM QUALIFICATIONS : Excellent written and verbal communication skills and CPU literate (MSWord, Excel, Outlook) Ability to work with minimal supervision, professionally confident and self-motivated. Good electro-mechanical skills to disassemble and assemble electronic products. Proficient working from engineering documentation (schematics, wiring diagrams, PCB assembly drawings, Bills of Material etc.) Proven experience and/or interest and ability to learn and develop skills with: Troubleshooting down to the component level analog and digital PCBA's, acoustic transducers and cable assemblies to identify source of the fault. Utilizing standard and acoustic source and measurement techniques and equipment. SMD and leaded PCB assemblies; ability to remove and replace SMD and leaded components when necessary. ASEE, ASET or equivalent. Experience in a manufacturing organization as Production Test Technician or experience as an Engineering Technician a plus.

We have an exciting opportunity to join us in supporting one of our valued customers as an Electronic Warfare SME supporting United States Special Operations Command (USSOCOM) and Special Operations Forces (SOF). Various Locations: Fort Belvoir, VA; Fort Bragg, NC; Lexington, KY; Fort Eustis, VA; Natick, MA * This position is contingent upon a contract award* Essential Duties: * Assist the SGM and Deputy for TT as the EW SME working in collaboration with government partners, academic laboratories, and private industry - to develop new tools and technology in support of the SOF Electronic Warfare community. * Assist in the preparation and development of new requirements documentation to include Initial Capabilities Documents (ICD), Capabilities Development Documents (CDD), SPECAT messages, Basis of Issue Plans (BOIP), Test Plans, and update Project Folders. * Tasks include the identification and development of Radio Detection and Ranging (RADAR) and Electronic Counter Measures (ECM), Intelligence, Surveillance, and Reconnaissance (ISR), Electronic Warfare (EW), and Signals Intelligence (SIGINT) for further development or fielding in support of SOF. Required Qualifications: * Qualifications include a background in EW, RADAR, ECM, ISR, EW, and SIGINT operations (particularly SOF) with a knowledge of EW techniques, tactics, & procedures. * 12+ years of relevant experience * Excellent communication, technical writing, and presentation skills. * Familiarity with DoD acquisition lifecycle and rapid prototyping processes. * Prior experience supporting USSOCOM, SOF AT&L, or other SOF components. (preferred). Education: Bachelor's or Master's degree in a related field Required Clearance: TS/SCI Travel: TBD Why Join USfalcon? * Mission-Focused Culture - Join a company deeply embedded in supporting defense, aerospace, and federal initiatives. * Career Growth & Development - Access training, mentorship, and advancement opportunities within a growing mid-tier defense contractor. * Trusted Industry Partner - Be part of a company with nearly 30 years of continuous service to DoD and federal clients.

YOUR DAY TO DAY: Responsible for operating and maintaining existing antenna and RF test facilities Responsible for writing RF Test procedures, collecting and analyzing RF Test data, and writing test reports. Work closely with Engineering, Manufacturing and Program Management to implement test strategies. YOU ARE THE RIGHT PERSON FOR THIS JOB IF YOU HAVE: Desirable experience includes knowledge of antenna and radome testing methodologies, RF test equipment including VNA's, RF sources, antenna ranges, mixers, Orbit 959 software, Labview and strong computer and math skills. Good eye/hand coordination Ability to work effectively with cross-functional teams Able to lift at least 40 lbs Climb, stoop, bend, kneel, and reach overhead for extended periods of time $35.00 to $40.00 per hour based on experience This position requires potential access to technology controlled under the International Traffic in Arms Regulations (ITAR) or the Export Administration Regulations (EAR). The successful candidate must be a “U.S. Person” as defined under ITAR and EAR. In order to be a U.S. Person for ITAR and EAR purposes, you must (i) be a citizen or national of the United States; or (ii) be a lawful permanent resident of the United States; or (iii) a protected individual as defined by 8 U.S.C. 1324b(a)(3). REQUIREMENTS: US citizenship, the ability to qualify for national defense security clearance and the ability to climb a 100-foot test tower is required. SHAPING THE FUTURE THROUGH INNOVATION AND DISCOVERY! With a history spanning more than seven decades, Communications & Power Industries' thousands of products have impacted people's lives in numerous unseen ways every day. Our highly engineered products serve as the backbone of modern-day commercial and military communications systems, assist in diagnosing medical conditions, empower scientific discoveries and space exploration, and much more. CPI is headquartered in Plano, Texas and is a global manufacturer of electronic components and subsystems. We have manufacturing locations in the United States, Canada, Europe, and Asia. With a heritage of technological excellence, our team serves customers in the communications, defense, medical, industrial, and scientific markets. WHAT WE OFFER: Whether you are a seasoned professional or just embarking on your career, CPI is an ideal place to expand your knowledge and expertise. We cultivate a healthy, dynamic, and team-oriented environment that empowers our employees to develop, create and deliver innovative, reliable technology solutions to power, connect, protect, and support a better tomorrow. We offer our employees an attractive compensation package with competitive salaries and comprehensive benefits, including health and wellness programs, career development, generous retirement savings plan with company match and more! WHO WE ARE: We value the unique and diverse skills, qualities, and backgrounds that each employee brings to CPI, and we respect each employee as an integral member of our growing team. CPI is committed to providing equal employment opportunities for all current and prospective employees, as well as to promoting a culture of inclusion and respect for everyone. We celebrate the innovation that diversity creates in the work environment, and we recognize that each employee brings their own unique capabilities, experiences, and perspectives to the organization. It is this variety that adds value to our teams, as well as to our stakeholders. We welcome and encourage applicants to reach their full potential with us. CPI is proud to be an Equal Opportunity and Affirmative Action employer. We do not discriminate based upon race, religion, color, national origin, sex (including pregnancy, childbirth or related medical conditions), sexual orientation, gender, gender identity, gender expression, transgender status, sexual stereotypes, age, status as a protected veteran, status as an individual with a disability or other applicable legally protected characteristics.

Industrial Communications is an established and diverse wireless communications company providing powerful communications solutions to businesses, public safety, and government agencies throughout New England and South Florida. We have an immediate opening at our Marshfield, MA headquarters for an experienced Manager/Public Safety RF Systems. The essential duties and responsibilities for the Manager/Public Safety RF Systems are as follows: Design, implementation, and troubleshooting of two-way radio systems including infrastructure, subscribers, mobile backhaul Assist with customer presentations and proposals System staging System acceptance testing Radio coverage testing and interference mitigation Complete system documentation System upgrades Management of P25 sales personnel Management of RF systems technicians and network IT personnel Management of administrative support personnel Oversight of public safety network (fiber and microwave) JOB SPECIFICATIONS for the Manager/Public Safety RF Systems(Knowledge, Skill Sets, Experience, etc.) Bachelor's Degree in Engineering or Computer Science preferred 4+ years of experience RF systems engineering Experience/knowledge in radio communication systems, radio propagation, RF, wireless or broadband/LTE is preferred Strong technical acumen and willingness to interface with the customers Experience working with public safety customers Proven end-to-end technical experience in wireless communications (i.e., from mobile device through to core infrastructure) Strong general knowledge of wireless communications fundamentals and voice/data architectures Strong general knowledge of IP networking protocols and security Familiarity with Motorola Solutions' portfolio including ASTRO 25, Avtec, MOTOTRBO, WAVE/Team Communications, etc. a plus Familiarity with public safety radio systems design and operation Excellent verbal and written communications skills and the ability to present complex topics to non-technical audiences Ability to build strong relationships with internal and external stakeholders Self-motivated, excellent problem-solving skills, and a strong attention to detail CERTIFICATIONS CETa certification, FCC license, General Radio Operators License (GROL), APCO Public Safety Radio Technician is a plus. Electronics/Applied Electronics background desired.

This position is responsible for testing, aligning, troubleshooting, repairing and modifying circuit boards to obtain specified functionality. Test various circuit board chassis to comply with customer specs. Make repairs down to component level on circuit boards. Make adjustments and calibrations to circuit boards. Modifies functions of circuit boards to conform to specific requirements. Sets up standard test apparatus or test equipment and circuitry to conduct functional and operational tests to evaluate performance and reliability of circuit boards. Analyzes and interprets test data. Adjusts, calibrates, aligns, and modifies circuitry, components and records effects on unit performance. Complete paperwork associated with testing and troubleshooting. Fabricated cables for use with test equipment and circuit boards as needed. Qualifications: Must be able to troubleshoot down to component level. Must have strong skills with volt meters, spectrum analyzers, network analyzers, oscilloscopes, power supplies and signal generators. Strong electronics background especially in the Radio Frequency and digital electronics field. Must be able to read electronics schematics. Good deductive reasoning ability for troubleshooting. Demonstrates ability to be mechanically inclined with soldering skills. Must be open minded to perform all tasks needed. Background in radio communication a plus. Ability to use mechanical tools in the fabrication and assembly of chassis. Will be working under microscopes for long periods of time. Must be a US Citizen. Must pass a background check and drug test.

Schedule: Thursday, Friday, Saturday, Sunday, Monday - 6:00am to 2:30pm Pay Range: $34-38/hr, depnding on overall skills and experience OVERVIEW OF ROLE: The Electromechanical Technician will be responsible for carrying out assembly, maintenance, and troubleshooting of control systems infrastructure and equipment. They will be responsible for both low-voltage control wiring and higher-voltage power wiring and will work on a variety of internally developed and third-party systems and machines. They will work closely with Controls Engineers and Maintenance Mechanics on the Manufacturing team, as well as both technicians and engineers from a variety of adjacent working groups. for all in-plant automation devices such as Allen Bradley PLC's, HMI's and VFD's.. The Electromechanical Technician will assist in accurate data collection for MES, Kepware and SCADA systems. ESSENTIAL DUTIES AND RESPONSIBILITIES: * Perform maintenance (corrective, preventive, predictive, routine, and troubleshooting) on instrumentation systems and components in a safe, efficient, and compliant manner. * Wire, test, and troubleshoot control panels and individual electrical subcomponents. * Assemble control systems infrastructure and install third-party equipment such as power meters, pumps, pressure sensors and the like. * Read and mark-up electrical schematics. * Assist with maintaining all equipment programs database. * Follow company and industry workmanship standards for assembly and electrical work. * Follow Lock-Out Tag-Out (LOTO) procedures as-needed. * Set up and troubleshoot simple ethernet communications networks. * performing routine and emergency maintenance of the facility's industrial electrical and control systems and equipment. * Recommend component replacement or upgrades when items become obsolete or are at end of life. * Assist in maintaining building SCADA systems to ensure all are functioning as designed. * Continuously improve the reliability of current systems * Ability to effectively communicate with co-workers and take direction from others. * Ability to work in a fast-paced environment, with multiple and changing priorities while maintaining strong attention to detail and a high level of accuracy. * Other job duties as assigned EDUCATION AND/OR EXPERIENCE: * 2 - 4 years of relevant experience * Familiarity with the basic concepts of PLCs, HMIs, SCADA systems, and networking * Familiarity with cGMP/GMP. * Strong understanding of automated manufacturing equipment and programming required. * Knowledge of proper wiring and cabling standards and techniques (Clean termination, ferruling, grounding & bonding, strain relief, etc.) * Proven experience with troubleshooting equipment problems and performing complex system tests required. * Rockwell certification preferred. * Proficient in MS Word, Excel, PowerPoint required. * Experience with databases, process monitoring systems and MES (manufacturing execution system) / information systems. * Valid Massachusetts Driver's License required. * Know the proper use of hand and power tools. * Experience in a food processing & manufacturing environment is a plus. PHYSICAL REQUIREMENTS AND ENVIRONMENT: * Must have good vision and manual dexterity. * Able to sit / stand for prolonged periods at a desk and working on a computer. * Must be able to work in a cold environment and in tight areas. * Able to bend, push, carry, twist, and lift up to 50lbs without difficulty on a continuous basis. * This position requires participation in our mandatory respiratory protection program with respect to some essential tasks. Performance of confined space entry is also required with respect to some tasks which are essential to this job. * Loud Noise * Perform tasks in both cold and hot work environments. * Company provided Personal Protection Equipment (PPE) must be worn while on the production floor Exciting Benefits Await You! * Enjoy top-tier Medical, Dental, Vision coverage. * Pamper your furry friends with Pet Insurance. * Stay fit with our Wellness Plan and Free Gym Access. * Boost your skills with Employee Tuition Reimbursement. * Unlock endless opportunities with College Scholarship for dependents. * Reap the Rewards of Our Bonus Program Available to Our Salary and Hourly Employees. * Receive a Generous 401k Company Match. * Take advantage of Competitive Paid Time Off. * Elevate Your Safety Net with Company-Sponsored Life Insurance Coverage. * Receive Relocation Assistance for a Smooth Transition. * Earn Rewards through our Employee Bonus Referral Program. * Elevate Your Workplace Experience with Community Impact Opportunities. * Celebrate Together with Employee Appreciation BBQs, Happy Hours, Birthdays, & More! Opportunity Calls! Unsure if you meet all requirements? Don't hesitate, apply! Our recruitment process is prompt and transparent. Your resume will receive swift attention from our talent professionals. If chosen, you'll undergo a recruiter phone screen, followed by interviews with key team members. We value your potential. At Home Market Foods, we champion equal opportunities for all, prohibiting discrimination based on race, religion, gender, and more. Our commitment extends across all aspects of employment, ensuring a fair and inclusive workplace. At this time, Home Market Foods will not sponsor applicants for employment authorization for this position for the following work visas: STEM OPT EAD, H-1B, H-1B1, E-3, O-1, J-1, or TN

Job Description Job Title: PCB Electronics Technician Pay Rate: $22-25/ hour Duration: PERM Shift: 1st - 7am-330pm PCB Electronics Technician The PCB Electronics Technician will perform functional testing in accordance with board test procedures. They will also perform board level troubleshooting to identify manufacturing defects and / or defective components. The PCB Electronics technician will use several pieces of test and analysis equipment to inspect and test boards as well as perform root cause analysis on board failures. Duties and Responsibilities: Testing, troubleshooting, and repairing a wide variety of low-volume printed circuit boards down to the component level using sophisticated state-of-the-art equipment Testing, troubleshooting and repairing analog and digital printed circuit boards with SMT and through-hole components Complete test procedures and process records using MS Excel. Keep detailed records of testing performed and defects discovered. Perform printed circuit board assembly rework Maintains a neat, orderly and safe work station **Required Education and Experience ** A.S. or B.S. Degree from a College, University, or Technical School; or equivalent combination of education and experience. Experience testing, troubleshooting or repairing boards with SMT and through-hole components. Experience using scopes and meters. Ability to solder and use electronic assembly tools and read and interpret detailed electronic assembly drawings, schematics and process documents. Additional Preferred Skills, Experience, and Certifications IPC J-STD-001 & IPC-7711/7721 certification or training a plus Basic computer skills, including MS Office Physical Requirements While performing the duties of this job, the employee is regularly required to sit. The employee frequently is required to use hands, hands to finger, handle, or feel objects, tools or controls and talk or hear. The employee is occasionally required to stand; walk; reach with hands and arms; and stoop, kneel, or crouch. The employee must frequently lift and/or move up to 20 pounds and occasionally lift and /or move up to 40 pounds. Specific vision abilities required by this job include close vision, color vision, depth perception and the ability to adjust focus. Team members must adhere to the FAA Drug & Alcohol testing program.

Job Description Wire and build electrical control panels, junction boxes and subassemblies per customer requirement. Read and interpret schematics, diagrams, blueprints, specifications, work orders, bills of material. Drill or tap holes to mount control units or to provide openings for components, wiring, or instruments. Utilize a variety of small hand tools such as wire strippers, crimpers, wrenches, screwdrivers, and pliers. Complete point-to-point wiring, and install a wide variety of electronic components including PLCs, relays, lights, switches, etc. Red-line documentation as necessary to initiate ECOs through Engineering. Perform operations such as deburring, grinding & sawing. Operate hand pallet jacks to move material within plant. Install finished assemblies or subassemblies in cases and cabinets. Willingness to work overtime as needed. EDUCATION AND EXPERIENCE Minimum of a High School Education. Technical Certificate in Electrical Controls is desired 2+ years' experience in control panel building, wiring, reading schematics and electrical diagrams. An understanding of electrical currents. Highly motivated, detail oriented and able to work independently as well as in a team environment. Mechanical installation and electrical wiring for control panels and desks. Experience using hand tools to drill, tap, and assemble electrical panel is a must. PHYSICAL DEMANDS Work involves frequent lifting of materials and product up to 30 pounds. Frequent use of hand tools. Long periods of standing. WORKING CONDITIONS Working conditions are normal for a manufacturing environment. Machinery operation requires the use of safety equipment to include but not limited to, eye safety glasses, hearing protectors, safety shoes, and hardhats. Loose fitting clothes and jewelry are not permitted. SAFETY RESPONSIBILITIES Safety shoes are always required throughout the manufacturing plant. Certifications as necessary based on function; lock out/tag out, fork truck certification. Other personal protective equipment as required for drilling, tapping, deburring, cutting, testing, lifting, and moving equipment. Pay Range (Massachusetts): $21.29 - 26.51 per hour. This range reflects the expected base pay for this position in Massachusetts and is based on internal equity and the established job family compensation structure. Actual compensation may vary based on experience, qualifications, and performance.

At REGENT, we're on a mission to revolutionize regional transportation between coastal cities. We're not just building vehicles, we're creating a new category of transportation: the seaglider. These groundbreaking wing-in-ground-effect craft travel just above the water's surface, combining the speed of an airplane with the low operating costs of a boat. Capable of 180 miles at 180 mph on today's battery tech (and up to 400 miles with next-gen batteries), seagliders will unlock fast, affordable, and sustainable coastal transit for passengers and cargo - connecting cities, islands, and communities like never before. Backed by leading investors and powered by a team of passionate, forward-thinking engineers, builders, and operators, we're now scaling from a breakthrough prototype to full production - and building the team to make it happen. Role Overview We're looking for a mission-driven Electromechanical Technician to help bring REGENT's groundbreaking seagliders to life. In this role, you won't just assemble parts - you'll be building the future of coastal mobility by integrating and testing the critical systems that will make our vehicles fly just above the waves. This is an opportunity for a hands-on builder with a deep understanding of both mechanical and electrical systems to contribute to something truly transformative. If you've worked in aerospace, marine, robotics, or complex R&D environments and are energized by solving real-world problems with hardware, we'd be thrilled to have you on the team! If you're energized by working at the intersection of cutting-edge innovation, real-world impact, and hands-on engineering, you'll be in the right place - and we'd be thrilled to have you on the team! What You'll Do * Assemble, install, and test integrated systems including motors, actuators, sensors, wire harnesses, control surfaces, and other electromechanical assemblies. * Fabricate and route harnesses from schematics and 3D models, using crimping, soldering, and strain relief techniques to aerospace standards (e.g., IPC/WHMA-A-620). * Troubleshoot system-level issues involving electrical, mechanical, or sensor components-identify root causes and propose solutions in collaboration with engineers. * Read and interpret both electrical schematics and mechanical assembly drawings to support builds and integration. * Install and calibrate moving systems, such as control surfaces, propulsion assemblies, or actuation systems, ensuring smooth mechanical operation and proper electrical interfacing. * Support testing and validation of complete vehicle systems - both on the bench and integrated into seaglider platforms. * Collaborate across disciplines (e.g., mechanical, electrical, avionics, and systems engineering) to rapidly iterate and improve design and build processes. * Contribute to tooling, workspace setup, and safety practices, including safe handling of high-voltage systems and moving machinery. What You'll Bring * Demonstrated experience building and supporting electromechanical systems - including actuators, sensors, motors, wiring, and control interfaces. * Proficiency in using both mechanical and electrical hand tools, diagnostic instruments (multimeters, torque wrenches, etc.), and assembly techniques. * Familiarity with aviation, aerospace, or high-reliability standards for assembly, harnessing, and workmanship (e.g., IPC-A-610, IPC/WHMA-A-620, or equivalent). * Ability to read and follow electrical schematics, wiring diagrams, and mechanical assembly drawings. * Understanding of safe work practices around high-voltage systems, rotating machinery, and prototype environments. * A collaborative mindset and the ability to adapt in a fast-paced prototyping environment. Bonus Experience * Experience in aerospace, marine, robotics, or advanced manufacturing environments. * Worked on systems involving high-voltage power, battery modules, or energy storage (Li-Ion or Li-Polymer). * Familiarity with motor control systems, linear actuators, servos, or propulsion subsystems. * Exposure to prototyping or R&D test environments, with rapid iteration cycles and hands-on debugging. * Worked with CAD or electrical design software (e.g., Siemens NX, Capital, or Altium) for layout or harness routing. * Experience operating or maintaining marine craft, UAVs, or small aircraft. Who We're Looking For * Collaborative Team Player: You believe that great things happen when teams work together. You communicate effectively and collaborate with engineers, stakeholders, and other cross-functional teams to align on goals and move projects forward. You bring people together, ensuring that everyone is on the same page and moving towards a shared vision. * Creative Problem Solver: You thrive on tackling complex challenges and finding innovative solutions. Whether you're resolving installation challenges, debugging elusive electrical issues, or adapting on the fly during integration and test, you bring a practical, inventive mindset to every problem. You don't just patch issues - you improve processes, anticipate downstream impacts, and help turn one-off fixes into scalable solutions that raise the bar for future builds. * Adaptable & Agile: In a fast-paced, ever-evolving startup environment, you quickly adapt to changing priorities and requirements. You approach challenges with a calm, resilient mindset, and know how to pivot and adjust your approach as needed, ensuring that progress continues without missing a beat. * Innovative Mindset: You're driven by curiosity and a passion for technology. You're passionate about driving continuous improvement, embracing new technologies and methodologies to enhance efficiency, quality, and team performance. What We Offer * Competitive compensation including a robust equity incentive plan. * Comprehensive health, dental, and vision insurance - we cover 100% of your premiums. * 401(k) with company matching, so you can plan for the future. * 10 days of paid time off and company-wide holiday breaks. * Relocation packages available for those moving to join our team. * Daily, free catered lunches * Learning & professional development opportunities If you're ready to take on an exciting challenge, grow with us, and make a lasting impact, we want to hear from you. Even if you don't meet every requirement, but you see yourself contributing to our mission, we encourage you to apply! We value diverse skillsets and experiences and believe in the potential of passionate individuals to make a big impact. Equal Opportunity Employer REGENT is an Equal Opportunity Employer. We are committed to creating a diverse and inclusive work environment. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, disability, or any other characteristic protected by law.

We are seeking skilled and motivated Electronics Technician candidates to support on-site at Naval Undersea Warfare Center (NUWC), you will provide direct support to Code 34 Imaging and Electronic Warfare (I&EW) Team. Position responsibilities include fabrication, manufacture, testing, installation and maintenance of I&EW Sensors and Antenna Shipsets, repair, assembly, installation and test support for Electronic Warfare Sensors and related special support equipment. Duties and Responsibilities: Mechanical and electrical troubleshooting, repair, and assembly of complex I&EW systems Testing of sub-assemblies and completed systems; Collect Antenna Assembly technical data at the component, subassembly, and assembly levels Conduct receipt inspections and determine serviceability of Fleet-returned assets as well as electrical and mechanical inspections to ensure vendor compliance of received parts Conduct Quality Assurance Inspections on new and repaired assemblies as required by directives Analyze the collected technical data for conformance to specifications, identify issues, and provide recommendations to resolve any issues Assembly of Engineering Prototypes including product improvement feedback to engineers, and the completion of drawing redlines, and associated process forms as required Assistance in the development of Test Procedures Develop program status reports such as technical assessments, risk assessments, technical recommendations or technical information Requirements/Skills: Technical School Diploma and two years' experience related to the above tasks, or a minimum of 6 years active-duty submarine combat system experience preferably with experience with US Navy Submarine Combat Systems (BYG-1, EW, SONAR, IMAGING, etc.). Tasking requires a strong attention to detail and working knowledge of Microsoft Office Suite Familiarity with electronic testing procedures and Standard Test equipment Ability to learn and apply techniques quickly as part of a team effort, or independently, to develop innovative technical solutions Documented completion of soldering and / or fiber-optic termination / connectorization / certification / training Strong problem-solving skills and ability to work both independently and in a team environment Strong documentation and communication skills US Citizenship and be able to obtain and maintain a Secret Clearance. Additional Skills of Interest: (not required) Active DoD Security clearance Understanding of DoD engineering design practices Knowledge of EW systems and technology, specifically AN/BLQ-10 Experience in VISIO or similar engineering-oriented documentation applications Working Place: US Naval Undersea Warfare Center, Newport, RI, USA Company : Rite-Solutions - Oct 29th VIrtual Fair

TSC is seeking an entry level Elecrtomechanical Technician with experience or interest in cable assemblies, electronic components, and precision mechanical work to support work in our Plymouth, MA location. The ideal candidate is hands-on, detail-oriented, and knowledgeable about manufacturing best practices within an ISO9000-compliant environment. Key Responsibilities Manufacture and assemble electronic assemblies, including: Soldering (surface-mount and through-hole) Crimping a wide range of terminals and connectors Heat-shrink applications and harness routing Work with printed wiring assemblies (PWAs) and printed circuit boards (PCBs), including component installation, inspection, and rework. Fabricate and modify sheet metal components using shop tools. Operate machinery such as but not limited to: drill press, precision hand tools, measurement and inspection equipment (calipers, micrometers, torque tools), torque fasteners and mechanical assemblies to specified values using calibrated tools. Follow all manufacturing best practices, workmanship standards, and engineering documentation (schematics, drawings, work instructions, travelers). Ensure work adheres to ISO9000 quality management procedures. Conduct in-process inspections and maintain accurate production records. Collaborate with engineering, quality, and production teams to support continuous improvements. Required Qualifications 1-2 years of experience in a manufacturing or an electronics assembly role (or equivalent hands-on background) US Citizenship and the ability to obtain and maintain a government security clearance. Proficiency in electrical cable assembly and soldering (IPC-620 or IPC-610 certification is a plus), crimping and use of manual/automated crimp tools Efficient in PCB handling and ESD-safe work practices Strong mechanical aptitude and ability to read engineering drawings. Understanding of ISO9000 or similar quality standards. Ability to work independently, manage multiple tasks, and meet production deadlines. Strong attention to detail, quality, and safety. TSC Benefits: TSC offers a stable work environment, a competitive salary, and a comprehensive benefit package; including Employee Stock Option Plan (ESOP) participation, 401k Plan, Flexible Work Schedules, Tuition Reimbursement, Co-Sponsored Health Plan, Paid Leave and much more. TSC is a growing organization with unlimited opportunity! Applying to TSC: Only those candidates invited for an interview will be contacted. Employment at TSC is contingent upon the successful completion of a comprehensive background check, security investigation, and a drug screening. This contractor and subcontractor shall abide by the requirements of 41 CFR 60-1.4(a), 60-300.5(a) and 60-741.5(a). These regulations prohibit discrimination against qualified individuals based on their status as protected veterans or individuals with disabilities, and prohibit discrimination against all individuals based on their race, color, religion, sex, sexual orientation, gender identity, national origin, or for inquiring about, discussing, or disclosing information about compensation. Moreover, these regulations require that covered prime contractors and subcontractors take affirmative action to employ and advance in employment individuals without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

K-Tek's core business is into temporary staffing, permanent placement and volume hiring. Since inception of our staffing solutions has grown multi-fold with global offices. We know what works best for our clients and what doesn't. This is the key differentiator and this is how we edge over the competition. Job Description Hi Kindly share accordingly. Key points to select the profiles : 1) Strong Post production support experience 2) Little experience with system admin role (All the profiles shared with me has good system admin experience, but production support at all. Please don't narrow the search only with system admin exp) 3) Good communication skills Location 1 - MTV CA Location 2 - Cambridge MA While sharing kindly share the location in which he is interested, moreover Interview mode - Google Hangout get their comfortability too. Description: L3 Technical Support Engineer Job Purpose: Handle complex technical support requests from Enterprise Travel customers. Monitor and support internal environments, applications and tools. Handle first level technical escalations as part of a support desk. Job Responsibilities: • Process support requests from customers, via email and telephone • Follow documented process flows and playbooks to resolve customer issues • Utilize debugging tools to triage partner issues autonomously • Accurately maintain case management system, and record status of work • Write code snippets under supervision • Respond to technical alerts, and troubleshoot as necessary • Identify when cases require escalation, and engage with higher support tiers to handoff cases • Identify opportunities for process improvements • Provide advanced technical troubleshooting of customer issues, including networking, and integration • It may be required to work with cross functional teams spread across multiple geographies • Provide mentoring and support to junior resources where appropriate Skills/Qualifications: • Technical support experience, preferably in Enterprise software, or the travel industry • Domain expertise - Contact center, Services, Tech Trouble shooting etc • System Administration experience • Expertise in web technology and protocols (HTTP, SSL, XML, FTP, etc) • Basic networking expertise and troubleshooting • Medium to advanced linux skills • Shell scripting experience • Experience reading, writing and troubleshooting at least one of Perl or Python • Experience with version control • Ability to read and construct XML • Familiarity with the Xymon open source product nice to have. • Strong analytical, troubleshooting and problem-solving skills • Strong attention to detail, and ability to follow processes Strong English oral and written communications skills to interact with customers and internal stakeholders • Proven ability to manage conflicting priorities under guidance • Experience working with teams in different timezones a plus • Experience documenting support workflows and processes • Development experience a plus • 3-5 yrs of experience providing technical support and environment support Additional Information All your information will be kept confidential according to EEO guidelines.

MIKEL is currently seeking an Engineering Technician for Code 25 Lab Operations and Maintenance, based at Naval Undersea Warfare Center, Newport, RI. Operations are conducted throughout three shifts. The work schedule supports dynamic 24/7/365 lab operations, including weekends and holidays. The position requires the ability to lift more than 30 lbs., walk up and down stairwells, and between buildings. The individual is required to hold and maintain a secret clearance. The applicant will support Code 25 Combat Systems with laboratory upgrades and lab equipment services highlighted within the contracted technical scope. They will work as a member of our Infrastructure Department in a fast-paced, multi-faceted environment, supporting all Code 25 combat system projects. The content of work involves performing roving tours of facilities, recording events in an electronic pass down log system, responding to customer needs via electronic work request system, and providing hotel services for lab users (e.g., install electronic auxiliary freshwater systems; militarized and commercial power cables; interface cables; lab foundations; other various militarized and commercial equipment). The candidate is expected to provide logistical support, inspect/Q&A material, and prepare various materials for shipping and receiving. Candidates should have the ability to react to situations that are not identified within Standard Operating Procedures. Additionally, the applicant is expected to support Media Center tasking to include: * Adapt and understand proper protocols/handling instructions when dealing with classified material. * Become familiar with Base Inventory Tracking System (BITS) intranet database. * Conduct inventory of Media Center holdings. * Issue/return media for customer use (Check-In/Check-Out). * Support three Media Centers located in Code 25 classified enclaves. * Understand and adhere to Laboratory Standard Operating Procedures Preferred Experience & Skills: * Currently possess or have the ability to possess an active Secret Clearance. * Proficient technical skills. * Familiarity of electrical systems, water-cooling systems, and various interface cables (e.g., Ethernet, coax, and fiber optics). * Familiarity with various power and basic hand tools. * Well-versed with Microsoft Office Suite and basic computer functions * Customer service-oriented. * Analytical ability to define problems, collect data, and take recommended action based upon applicable established guidelines. * Effective communication, both verbal and written, with the ability to work in a team environment. MIKEL offers a competitive salary and a comprehensive benefits package that includes: Medical/Dental/Vision Insurance, Flexible Spending Account (FSA), 401k Retirement Plan, Life Insurance, Disability Insurance, Paid Time Off (PTO), and Tuition Reimbursement. Department of Defense Secret security clearance is required at the time of hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. MIKEL is an Equal Opportunity Employer. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws.