Electronics technician jobs in Thomasville, GA - 67 jobs

Job Description ABOUT THE ROLE The production service team ensures customer issues are addressed to the customer's satisfaction in a timely manner in accordance with Cavco warranties and commitments. Ensuring ongoing customer loyalty and brand support is a key driver of production service team success. The Production Service Technician resolves customer issues on site at times identifying and addressing the defect issues themselves within Cavco's warranties and commitments. He/she assists customers with understanding their product purchase. This role may work independently or under direct supervision executing specific process steps under continuous quality review and coaching as needed. ESSENTIAL DUTIES & RESPONSIBILITIES Installs and repairs Cavco products, and performs on-site post-installation repair, calibration, and maintenance as scheduled or required, applying knowledge of electronics, electrical circuits, and appliances. Checks work orders and related manuals, blueprints, and schematic diagrams to determine tasks to be performed and tools, equipment, and parts needed for installation of repair assignment. Discusses assignment with customer's representative and inspects installation site to verify that electrical supply wires, conduit, switches, and circuit breakers are installed according to specifications. Tests electrical components, such as wiring, switches, and relays, using testing instruments, and replaces faulty components, using hand tools. Conducts routine preventative maintenance according to established guidelines and schedules. Insures that Cavco products meet defined specifications May train customers in operation of equipment. May repair faulty printed circuit boards. May be on-call and perform emergency repairs during off-business hours. MINIMUM QUALIFICATIONS High school graduate with some college 2 - 4 years previous relevant, related experience Demonstrate the ability to anticipate and solve practical problems or resolve issues Demonstrated in-depth customer service history Effective ability to communicate orally or in written form effectively with co-management, internal, and external customers Ability to work in a fast pace environment • Attention to detail

Department Campus Recreation Responsibilities * Conducts daily/regular inspections of all buildings, facilities, and grounds. Coordinates and performs routine maintenance duties on a daily basis for buildings, grounds, and equipment essential for daily operations of a multi-purpose recreational facility. Work includes, but not limited to: painting, carpentry, electrical, plumbing, and mechanical repairs, and basic housekeeping. * Performs preventative maintenance on various mechanical and HVAC systems at department's lake front park to include maintaining motors, pumps, filters, domestic water systems, and a variety of mechanical, electrical, or specialized recreational equipment. * Maintains all mechanical equipment in good working order and is clean, such as tractors, mower cutting wheels, weed trimmers, mule vehicle, golf cart, fences, and other miscellaneous equipment or items. * Coordinates maintenance of irrigation systems at all facility locations to maintain good working order and schedule timing of application on regular basis. Inspects and monitors grass condition for insects, fungus or other problems and address accordingly. * Assists with special event and generated revenue rental programs. Works closely with Assistant Director, Lakefront Park Operations to prepare and finalize facility/activity set-up, break down, custodial needs, and hosting. Qualifications High school diploma or equivalency and two years of experience related to the duties of this position; or a combination of post-high school education and experience equal to two years in the same. Technical or vocational degree in plumbing, electrical work, HVAC or other trade, may substitute for experience. Ability to lift 50 pounds, work in extreme outdoor conditions, and work from heights of 35 feet. Must have a valid Florida or Georgia Driver's License, or the ability to obtain prior to hire. University Information One of the nation's elite research universities, Florida State University preserves, expands, and disseminates knowledge in the sciences, technology, arts, humanities, and professions, while embracing a philosophy of learning strongly rooted in the traditions of the liberal arts and critical thinking. Founded in 1851, Florida State University is the oldest continuous site of higher education in Florida. FSU is a community steeped in tradition that fosters research and encourages creativity. At FSU, there's the excitement of being part of a vibrant academic and professional community, surrounded by people whose ideas are shaping tomorrow's news! Learn more about our university and campuses. FSU Total Rewards FSU offers a robust Total Rewards package. Visit our website to learn more about our Compensation, Benefits, Wellness, Recognition, and Employee Development programs. Use our interactive tool to calculate Total Compensation options based on potential salary, benefits and retirement contributions, earned leave, and other employment-related perks. How To Apply If qualified and interested in a specific job opening as advertised, apply to Florida State University at ********************* If you are a current FSU employee, apply via my FSU > Self Service. Applicants are required to complete the online application with all applicable information. Applications must include all work history up to ten years, and education details even if attaching a resume. Veterans' Preference Certain service members and veterans, and the spouses and family members of such service members and veterans, receive preference and priority, and certain service members may be eligible to receive waivers for post secondary educational requirements, in employment by the state and its political subdivisions and are encouraged to apply for the positions being filled. Veterans' Preference applies to University Support Personnel System (USPS) positions only. IMPORTANT: To claim Veterans' Preference, select "yes" to the question on the application questionnaire and upload a DD-214 (or equivalent), the Veterans' Preference Certification form, and other documentation if applicable with your online application before midnight of the position closing date. Click the links for eligibility information and required documentation, or call FSU Human Resources at **************. Considerations This is an USPS (University Support Personnel System) position. This position requires successful completion of a criminal history background check. Equal Employment Opportunity FSU is an Equal Employment Opportunity Employer.

Job Description We are seeking a skilled and dependable Restoration Technician to support emergency mitigation and restoration projects involving water, fire, mold, and environmental damage. This role is hands-on and field-based, working under the direction of a Lead Technician to ensure projects are completed safely, efficiently, and in accordance with industry standards. The ideal candidate is physically capable, detail-oriented, and committed to delivering high-quality service in challenging environments. Key Responsibilities Mitigation & Site Work Assist with water, fire, mold, and biohazard mitigation projects Set up and operate drying and dehumidification equipment (e.g., air movers, dehumidifiers, HEPA filters) Perform demolition, cleaning, and site preparation tasks Support containment setup and proper use of PPE Take moisture readings and document findings accurately using field apps or job logs Logistics & Team Support Load and unload tools and materials Maintain clean and organized job sites and company vehicles Communicate clearly and respectfully with team members, supervisors, and customers Follow all safety procedures and company protocols Emergency Response Participate in on-call rotation and respond to emergency calls as scheduled Qualifications Minimum 1 year of experience in mitigation or restoration WRT certification required (or ability to obtain within 90 days) Additional IICRC certifications (ASD, AMRT, FSRT) are a plus Physically fit and able to lift 50+ lbs Comfortable working in wet, dusty, or confined environments Valid driver's license and reliable transportation Strong work ethic, team-oriented mindset, and willingness to learn

Requisition No: 860466 Agency: Department of Corrections Working Title: Electronic Technician II - Statewide Pay Plan: Career Service Position Number: 70044444 Salary: $43,080.70 - $47,867.30 annually Posting Closing Date: 04/01/2026 Total Compensation Estimator Tool FLORIDA DEPARTMENT OF CORRECTIONS We Never Walk Alone Electronic Technician II- Statewide This open competitive advertisement is for a Career Service position located at various Correctional Institutions in the Maintenance Department statewide. The mission of Facilities Management and Building Construction at the Florida Department of Corrections is to provide a safe, secure, and efficient environment for staff, inmates, and visitors. This is achieved through the effective management, maintenance, and construction of correctional facilities, ensuring they meet all regulatory standards and support the department's overall mission of public safety and rehabilitation. This position is not a telework position and is required to report to the FDC office in the area it serves. JOB DUTIES: This working position is responsible for the maintenance, repair, and installation of all types of electronic systems and devices including but not limited to, electronic perimeter security systems, internal electronic security systems, electronic and electrical locking control systems, CCTV systems, communications systems, and associated systems and components utilized in the operation of a correctional facility. * Responsible for the maintenance, repair, and installation of electrical infrastructure, systems, and devices, and provides on-the-job training to supervised inmates. * Performs preventive maintenance, tests, logs, and keeps records for electrical systems as per Department guidelines. * Repairs and modifies complex electronic equipment and operates, repairs, and calibrates various testing equipment. * Plans and organizes work, requisitions necessary parts, and adheres to maintenance and construction policies and procedures. * Prepares reports, maintains custody and control of supervised inmates, participates in departmental staff training, and performs other related duties as required. BENEFITS: * Paid vacation, sick leave, and holidays. * Comprehensive health insurance and life insurance with accidental death and dismemberment benefits. * Supplemental Dental, Vision, Life, Disability and Hospitalization insurance. * Tuition-Free college courses. * Retirement Plans with the Florida Retirement System: * Pension Plan (Traditional Retirement Pension Plan) * Investment Plan (401(K)-Type Retirement Plan) * Deferred Retirement Option Program (Drop) * Deferred Compensation * Recently Retired? Beginning July 1, 2024, there is no longer a reemployment limitation; beginning with the 7th calendar month from the member's distribution date, there are no restrictions on working for an FRS employer. You will not be required to repay any prior distributions, and you may continue receiving distributions from the Investment Plan or Pension Plan without interruption. REQUIREMENTS: * A high school diploma or its equivalent and at least one (1) year of experience in the electronics /electrician field OR four or more years of electronics experience (College or vocational/technical training in one of the above listed trades can substitute for the required experience.) * A valid Driver's License Support of knowledge, skills, and abilities should be demonstrated on the application, in the education, in the work experience, in the work sample, in the interview and/or during reference checks. ADDITIONAL INFORMATION: BACKGROUND SCREENING REQUIREMENT The Florida Department of Corrections requires all job applicants and volunteers to pass a Level 2 background check as per Chapter 435, Florida Statutes. This check must be completed before they can start working or volunteering. EMPLOYMENT ELIGIBILITY The Florida Department of Corrections (FDC) only hires U.S. citizens and those authorized to work in the U.S. FDC uses E-Verify to confirm an employee's eligibility to work after completing the I-9 form. For online application issues, call the People First Service Center at **************. Applications will be accepted until 11:59 PM EST on the closing date. The State of Florida is an Equal Opportunity Employer/Affirmative Action Employer, and does not tolerate discrimination or violence in the workplace. Candidates requiring a reasonable accommodation, as defined by the Americans with Disabilities Act, must notify the agency hiring authority and/or People First Service Center (***************. Notification to the hiring authority must be made in advance to allow sufficient time to provide the accommodation. The State of Florida supports a Drug-Free workplace. All employees are subject to reasonable suspicion drug testing in accordance with Section 112.0455, F.S., Drug-Free Workplace Act. VETERANS' PREFERENCE. Pursuant to Chapter 295, Florida Statutes, candidates eligible for Veterans' Preference will receive preference in employment for Career Service vacancies and are encouraged to apply. Certain service members may be eligible to receive waivers for postsecondary educational requirements. Candidates claiming Veterans' Preference must attach supporting documentation with each submission that includes character of service (for example, DD Form 214 Member Copy #4) along with any other documentation as required by Rule 55A-7, Florida Administrative Code. Veterans' Preference documentation requirements are available by clicking here. All documentation is due by the close of the vacancy announcement. Location:

Job Description We are looking to hire a full-time, motivated, Tractor Technician to enhance our team! A team player who is positive, upbeat, and a quick learner. What we offer: Competitive pay based on experience (Pay Range $30-$42 per hour DOE) Medical Insurance Dental Insurance Life and Disability Insurance 401K Plan Holiday Pay Get paid weekly 5 Day work week Fourth-Generation Family owned & operated Growth opportunities Responsibilities: Perform work specified on the repair order with efficiency and in accordance with the dealership. Test components and systems, using diagnostic tools and special service equipment. Diagnose, maintain, and repair agriculture equipment Communicate directly with the Service Manager so that customers are informed if any additional service is needed. Provide an estimate of time needed for additional repairs. Execute repairs under warranty to manufacturer specifications. Qualifications: High school diploma or equivalent Diesel mechanic experience preferred Service Technician experience required Kubota experience preferred Dexterity, requiring a steady hand, excellent hand-eye coordination Mechanical and troubleshooting skills and ability to operate electronic diagnostic equipment Excellent customer service skills and basic computer competencies Must be able to work weekends Positive, friendly attitude, along with an eagerness to improve Enjoy working in a dynamic environment Teammate with the ability to collaborate with others effectively Ability to learn new technology, repair and service procedures and specifications Valid driver's license and clean driving record Willing to submit to pre-employment drug screen and background check *Pay may vary based on experience We are an equal opportunity employer and prohibit discrimination/harassment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job DescriptionDescription: The Electronic System Technician works a team of 3 electricians: 2 electrical systems technicians and 1 working supervisor. The team is tasked with maintaining all electrical systems at the City of Valdosta's water treatment facilities. This includes 2 wastewater treatment plants, 36 wastewater pumping stations, and 1 drinking water treatment plant. Work entails maintaining and repairing automated industrial control systems and their associated equipment, along with occasional facilities maintenance type tasks such as maintaining lighting and receptacles. Networking/IT type tasks, as well as various programming tasks will also be required. Overtime/after-hours emergency work is occasionally required. Requirements: Ability to accurately and clearly articulate technical electrical information, questions and/or concerns to coworkers, supervisors, vendors and contractors Ability to operate various hand and power tools, test equipment, and laptop computers Ability to organize and maintain good condition of spare parts, documents, work vehicle, tools, test equipment, PPE, etc. Ability to efficiently document and organize various part numbers, statistics, data, drawings, manuals, job write-ups, etc. Possess and maintain a valid State of Georgia Class C Driver's License Basic knowledge of electrical control components such as fuses, breakers, contactors, transformers, relays, timers, starters, overloads, status indicators, surge arrestors, float switches, pressure switches, limit switches, proximity switches, temperature switches, leak sensors, etc. Experience with single phase AC electrical systems up to 240 VAC Experience with three phase AC electrical systems up to 480 VAC, including “High Leg Delta” systems Experience with 12 and 24 VDC electrical systems Ability to read single line drawings and other electrical prints/drawings Ability to use a multimeter to safely and efficiently test voltage, amperage, continuity and signal loops Ability to work safely and quickly under pressure on time sensitive tasks Ability to safely troubleshoot in a live (up to) 480VAC control panel Knowledge of proper lockout/tagout procedures Awareness of the dangers of arc flash and arc blast and how to select the appropriate PPE for a task Familiar with safe hot-work practices Familiar with working safely around capacitors, hydraulic machinery and other stored energy equipment Familiar with general industrial jobsite safety such as working from heights (on ladders or in man lifts), in trenches, in confined spaces, near open pits/basins, and around machinery and moving parts. Possession of or ability to readily obtain a valid driver's license issued by the State of Georgia for the type of vehicle or equipment operated.

Any salary estimation specified in this job board may or may not be aligned with our organization's pay philosophy. Apply to connect with a Talent Acquisition Partner who can provide you more details! Cleaver Brooks is looking for a Technician Final Assembly to join our team in Thomasville, GA. The Technician Final Assembly is responsible for building and/or installing component parts on heads and/or boilers in preparation for test firing. Job Location: Thomasville, GA Basic Function: Purpose of this position is to build and/or install component parts on heads and/or boilers in preparation for test firing. Essential Duties: 1. The employee must be fully competent, meeting production and quality standards in a minimum of three (3) of the cells listed below. Assemble burner drawers and air compressors. Cut pipe nipples for ¼” to 4”pipe and use the tube bending machine for all applications. Mount the components on the CB, CBE, CBLE, CBW, CBX and CEW front heads including control panel, motor base, electrical components and conduit, air hood and all oil and gas piping. Must be able to read prints and wire all applications in the head shop, including motors and all 24, 110, 208, 230, 460 and 575 voltage components. Mount all components in E-box and control panels and completely wire all components by using the E.M.S. and wiring diagram. Able to wire all CB boilers and components; including but not limited to front head to junction or E-box, from E-box to pressure control air compressor, from E-box to oil pumps, gas trains and aquastats. Also mount and wire all sizes of disconnects. Other Duties: Perform any other job duties as directed by the Cell Leader or Foreman. Education Required: High school education or GED equivalent preferred. Must have good reading, writing and math skills. Technical training as an industrial electrician preferred. Experience Preferred: One (1) year of electrical and/or plumbing/piping experience in related manufacturing environment. Decision-Making Responsibilities: Entry level position that requires very limited decision-making. All questions should be directed to trainer, Cell Leader or Foreman. Environmental Factors and Physical Requirements: Must be able to lift up to 60 lbs. chest high on a regular basis. Must be able to access all areas of the plant both inside and outside. Will be exposed to noise, dust, dirt, welding fumes, natural gas, fuel oils, and machine lubricants and/or oils. Must be able and willing to work with and properly use all necessary and/or required personal protective equipment including, but not limited to, safety glasses, hearing protection, steel-toed shoes and fall protection. Benefits of Being a Cleaver-Brooks Employee: Competitive salary Comprehensive benefits, including medical, dental, vision, maternity support program, discounted virtual physician visits, voluntary medical benefits (Critical Illness, Hospital Care, and Accidental Injury), FSA, HSA, life insurance, short term and long-term disability Cash matching 401(k) plan Employee assistance program (EAP) Pet insurance Employee discount program Tuition assistance Paid time off and 11 paid holidays Who is Cleaver-Brooks: Cleaver-Brooks is the market leader in providing fully integrated boiler and burner systems. We lead the boiler/burner industry due to our unmatched distribution network's ability to deliver the knowledge, service, training, and support that are essential to long-term performance. Our customers will tell you that we are the only equipment provider that manufactures boilers, burners, controls, and a full array of ancillary and aftermarket products. They will also mention that our unique single-source capability means that we can deliver fully integrated boiler room solutions that reduce overall costs and optimize space. It is our focus on products that deliver the most efficient, reliable, safe, and environmentally sustainable solutions that differentiate us in the marketplace. Cleaver-Brooks continues a 90+ year legacy of providing the customers we serve with extraordinary products designed to deliver unsurpassed performance through the power of commitment. This description indicates the general nature of the tasks and responsibilities required of positions given this classification. It is not intended as a complete list of specific duties and responsibilities. Nor is it intended to limit or modify the right of management to assign, direct, and control the specific duties of individuals performing this function. The Company reserves the right to change, modify, amend, add to or delete from any section of this document as it deems, in its judgement, to be proper. By applying for this job and providing your mobile number, you consent to receive an initial text message from a Cleaver Brooks Talent Team member. You will have the option to opt out upon receiving the message. Messages may include updates on your application, scheduling initial screenings or interviews, and similar communications. Standard message and data rates may apply, and message frequency may vary.

Job Description Any salary estimation specified in this job board may or may not be aligned with our organization's pay philosophy. Apply to connect with a Talent Acquisition Partner who can provide you more details! Cleaver Brooks is looking for a Technician Final Assembly to join our team in Thomasville, GA. The Technician Final Assembly is responsible for building and/or installing component parts on heads and/or boilers in preparation for test firing. Job Location: Thomasville, GA Basic Function: Purpose of this position is to build and/or install component parts on heads and/or boilers in preparation for test firing. Essential Duties: 1. The employee must be fully competent, meeting production and quality standards in a minimum of three (3) of the cells listed below. Assemble burner drawers and air compressors. Cut pipe nipples for ¼” to 4”pipe and use the tube bending machine for all applications. Mount the components on the CB, CBE, CBLE, CBW, CBX and CEW front heads including control panel, motor base, electrical components and conduit, air hood and all oil and gas piping. Must be able to read prints and wire all applications in the head shop, including motors and all 24, 110, 208, 230, 460 and 575 voltage components. Mount all components in E-box and control panels and completely wire all components by using the E.M.S. and wiring diagram. Able to wire all CB boilers and components; including but not limited to front head to junction or E-box, from E-box to pressure control air compressor, from E-box to oil pumps, gas trains and aquastats. Also mount and wire all sizes of disconnects. Other Duties: Perform any other job duties as directed by the Cell Leader or Foreman. Education Required: High school education or GED equivalent preferred. Must have good reading, writing and math skills. Technical training as an industrial electrician preferred. Experience Preferred: One (1) year of electrical and/or plumbing/piping experience in related manufacturing environment. Decision-Making Responsibilities: Entry level position that requires very limited decision-making. All questions should be directed to trainer, Cell Leader or Foreman. Environmental Factors and Physical Requirements: Must be able to lift up to 60 lbs. chest high on a regular basis. Must be able to access all areas of the plant both inside and outside. Will be exposed to noise, dust, dirt, welding fumes, natural gas, fuel oils, and machine lubricants and/or oils. Must be able and willing to work with and properly use all necessary and/or required personal protective equipment including, but not limited to, safety glasses, hearing protection, steel-toed shoes and fall protection. Benefits of Being a Cleaver-Brooks Employee: Competitive salary Comprehensive benefits, including medical, dental, vision, maternity support program, discounted virtual physician visits, voluntary medical benefits (Critical Illness, Hospital Care, and Accidental Injury), FSA, HSA, life insurance, short term and long-term disability Cash matching 401(k) plan Employee assistance program (EAP) Pet insurance Employee discount program Tuition assistance Paid time off and 11 paid holidays Who is Cleaver-Brooks: Cleaver-Brooks is the market leader in providing fully integrated boiler and burner systems. We lead the boiler/burner industry due to our unmatched distribution network's ability to deliver the knowledge, service, training, and support that are essential to long-term performance. Our customers will tell you that we are the only equipment provider that manufactures boilers, burners, controls, and a full array of ancillary and aftermarket products. They will also mention that our unique single-source capability means that we can deliver fully integrated boiler room solutions that reduce overall costs and optimize space. It is our focus on products that deliver the most efficient, reliable, safe, and environmentally sustainable solutions that differentiate us in the marketplace. Cleaver-Brooks continues a 90+ year legacy of providing the customers we serve with extraordinary products designed to deliver unsurpassed performance through the power of commitment. This description indicates the general nature of the tasks and responsibilities required of positions given this classification. It is not intended as a complete list of specific duties and responsibilities. Nor is it intended to limit or modify the right of management to assign, direct, and control the specific duties of individuals performing this function. The Company reserves the right to change, modify, amend, add to or delete from any section of this document as it deems, in its judgement, to be proper. By applying for this job and providing your mobile number, you consent to receive an initial text message from a Cleaver Brooks Talent Team member. You will have the option to opt out upon receiving the message. Messages may include updates on your application, scheduling initial screenings or interviews, and similar communications. Standard message and data rates may apply, and message frequency may vary.

Job DescriptionDescription: Summary/Objective The field service technician is responsible for troubleshooting electro-mechanical problems, completing installations, and performing unscheduled repairs and scheduled maintenance on equipment, based upon customer demand and need; and to provide complete customer satisfaction in a polite and professional manner. Essential Job Functions: Effectively analyzes problem situations pertaining to breakdowns of customer equipment and recommends to customer actions necessary to correct situation. Exhibits a professional demeanor and promotes goodwill between the company and customers by providing a superior level of customer service. Observes, analyzes, and determines corrective course of action for service and repair of customer equipment. Performs necessary repairs to correct analyzed situations in a professional and productive manner. Performs scheduled maintenance on equipment for contracted customers according to Company policies and procedures. Follows safety rules and ensures that hazardous waste is disposed of properly. Opens and closes work orders with Dispatch, provides service repair narratives (written and verbal) for customer, and submits paperwork for time worked and repairs completed in a neat, accurate and timely manner. Accounts for 100% of paid time. Maintains part inventory and supplies in van. Maintains service van to ensure that it is clean, organized and hazard free inside and out Ensures that regular maintenance is performed on service van (i.e. oil changes, tire rotations, etc.) and that required repairs are performed. Performs factory authorized modifications per specifications. Responsible for maintaining personal tools required for performing the job effectively and safely. Responsible for following customer's safety and housekeeping guidelines when performing repairs at customer site. Performs related duties as assigned or as the situation dictates. Training Requirements: General Safety. Lock-out Tag-out. HAZMAT. Electrostatic Discharge Awareness. Foreign Object Damage Awareness. Quality System Awareness. Requirements: Required Education and Experience: A minimum of a high school diploma/GED and/or one to three years mechanical and electrical, experience in a similar environment or equivalent in college or vocational education. Excellent people skills and verbal communication required. Knowledge of reading schematics and manuals. Knowledge of mechanical and electrical equipment. Skilled in providing excellent customer relations by exchanging information with courtesy and consideration. Ability to exhibit a professional demeanor, and develop customer relations and superior service. Ability to effectively communicate (written and verbal) with all levels of an organization internally and externally. Ability to read and interpret schematics and understand necessary service and training manuals. Ability to perform arithmetic calculations involving fractions, decimals, and percentages. Ability to understand and follow verbal and/or demonstrated instructions. Ability to maintain a good understanding of industry innovations and product availability in order to make recommendations based on customer needs. Ability to safely operate personal hand tools. Ability to draw upon available support resources from within the company and recognize when it is appropriate to do such. Such other knowledge, skills, and abilities as are necessary in connection with additionally assigned duties. Additional Eligibility Qualifications: Experience or Certification(s) in one or more of the following: Gilbarco Dispenser Gasboy Fleet Passport Veeder Root Verifone Fuel Master Insurability requirement: Must possess a valid driver's license and maintain a good driving record. Work Authorization/Security Clearance: Security clearance may be required for this position. Work Environment: While performing the duties of this job, the employee is frequently exposed to fumes or airborne particles, moving mechanical parts and vibration. The employee is occasionally exposed to a variety of extreme conditions at construction job sites. The noise level in the work environment and job sites can be loud. The position regularly works near moving mechanical parts and in outside conditions that include inclement weather, heat and humidity, and exposure to dust and asphalt. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling and climbing all day. The employee must frequently lift and/or move up to 25 pounds and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Personal Protective Equipment: Safety Glasses and hard hats required while performing certain tasks. Position Type/Expected Hours of Work: This is a full-time position. Travel: Local travel is expected for this position. GFT is a Drug Free Workplace. We offer AMAZING benefits! 401K Match, Paid holidays, Paid Vacation and more.

Main Duties & Responsibilities Primary Job Role Conducts all assigned work in a safe manner, adhering to all applicable safety, environmental and contamination control policies, procedures and regulations. Wears proper personal protective equipment. Attends and successfully completes required technician training classes. Maintains necessary set of tools required for job performance to diagnose, disassemble and assemble components to manufacturer's specifications. Diagnose and perform designated repairs on customer or company owned equipment including, but not limited to, mechanical, electrical, hydraulic troubleshooting, maintenance and repairs. Works in a neat and orderly fashion, constantly looking for ways of improving the methods of work, work area, and safety standards. Inspects components to insure maximum parts are being reused to control repair costs. Completes required documentation utilizing appropriate software to document repairs performed on equipment, and accounting for repair times. Monitors job expenses versus repair estimates and ensures that the supervisor is aware of any cost over run, prior to the job being completed. Approaches work in a positive manner, maintains conduct that is supportive of the work Team and sets the standard for others to follow. Contributes to Team efforts by accomplishing tasks on time while maintaining safety and quality expectations. Trains and/or mentors others in department. Assumes Supervisors positon temporarily, as necessary. Performs other duties as assigned. Essential Job Competencies Safety: fully supports, encourages and follows safe work behavior, and considers safety of paramount importance in the workplace. Job Specific Skills: Demonstrates the required depth and mastery of knowledge and skill associated with the job as identified in the Learning Management System (LMS) and other applicable sources. Demonstrates the effective application of the job specific knowledge, skills and ability required to resolve job related challenges in the workplace. Refer to job specific training requirements for the job identified in the LMS. Communication: Uses active listening skills, conveying information with the appropriate medium that is clear and easily understood. Uses feedback to verify effective and accurate communication has occurred. Ensures that others having a need to know are kept informed about developments, progress, problems and plans through consistent, effective communication. Avoids surprises. Information Gathering: Checks all appropriate sources in identifying the information needed for analysis and decision making. Uses skillful methods in obtaining high quality relevant information. Checks work to ensure accuracy and completeness. Compares observations or finished work to what is expected to find inconsistencies. Clearly documents sources, and organizes the information according to the research needs. Takes Initiative: Takes appropriate action to resolve issues without requiring direction. Seeks out others involved in a situation to learn their perspectives. Makes difficult decisions in a timely manner. Is willing to make decisions in difficult or ambiguous situations, when time is critical. Assertive in a group when it is necessary to facilitate change, overcome an impasse, face issues, or ensure that decisions are made. Results Oriented: Has a strong sense of urgency and commitment to achieve desired results in the face of obstacles and frustrations. Remains focused, does not get bogged down in unnecessary detail. Identifies and utilizes the most efficient methods to successfully achieve tasks on time despite unforeseen events. Driven, maintains a sense of urgency and adjusts schedules as needed to achieve without sacrificing quality of work. Adaptability: Adapts to changing business needs, conditions, and work responsibilities. Adapts approach, goals, and methods to achieve solutions and results in dynamic situations. Recovers quickly from setbacks, and finds alternative ways to reach goals or targets. Open to different and new ways of doing things; willing to modify one's preferred way of doing things. Credibility: Demonstrated concern to be responsible, reliable, and trustworthy. Maintains commitments. Respects the confidentiality of information or concerns shared by others. Is honest and forthright with people. Takes personal responsibility for the quality and timeliness of work. Punctual, follows instructions, policies, and procedures. Personal Development: Takes responsibility for personal learning and development by acquiring and refining technical and professional skills needed in job related areas. Obtains developmental opportunities proactively. Actively seeks and embraces growth opportunities. Company Overview In 1962, Ring Power Corporation became a full-line Caterpillar dealer in North Florida, and later expanded its authorized territory to include Central Florida. Today, Ring Power Corporate headquarters in St. Augustine oversees the operations of 18 branch locations throughout the state of Florida, including large regional facilities in Tampa and Orlando and crane and forklift sales and service facilities in Pompano. Ring Power also has eight facilities outside of Florida - The Carolinas, Georgia, Texas & Tennessee- to serve the needs of other specialized industries and customers. Ring Power Corporation has become one of the largest Caterpillar dealers in the Southeastern United States through dedication to the mission of customer service. In order to preserve the "Customers First" reputation that Ring Power was built on, we continually train our employees and work closely with our customers to assure complete satisfaction, especially after the sale. Currently, more than 2,300 employees at 20+ locations throughout Florida and the United States work hard to provide the highest quality construction equipment, backed by responsive, professional service and support at every level. Qualifications Education and Experience Formal Education High School diploma or GED Experience 5-6 years Required / Credentials Valid Drivers License Successfully completed all required training curriculum to be designated Service Field Tech I Able to easily and effectively comprehend written material and communicate orally and in writing with employees and customers. Not Required but Highly Desired Criteria Proficient in the use of a computer, Microsoft Office products and relevant Dealer software programs. Updating of Knowledge Job requirements frequently change requiring re-training once or more per year. Responsibility for Change, Innovation, Overall Improvement, and/or Effectiveness Problem Solving Job requires complex problem solving skills in a dynamic environment. Independent research and analysis are routinely required to develop appropriate solutions. Awareness and intervention is expected to prevent problems from occurring. Creativity Job requires creativity as part of carrying out daily activities. New approaches are encouraged. Autonomy Job is not normally monitored, but overall objectives are clearly defined. Use of discretion in how the work is done, setting priorities and decision making is encouraged. More emphasis is placed on achieving the desired outcome, not on controlling the process. Working Environment Stress Load Regular exposure to these stresses (20-80% of the time). Workload Fluctuation Job frequently involves changes in priorities, complexity and/or quantity of work. Work Schedule Work is scheduled during regular business hours with frequent requirements to work nights, holidays and weekends. Organizational Impact A person's performance in this job has considerable immediate impact on expense, efficiencies or achievement of overall department objectives. Supervisory Responsibility Job has no subordinates / no supervisory responsibility (may work independently or as a member of a team) Physical Demands · "NA": Not Applicable · "O": Occasionally - (up to 3 hours/day) · "F": Frequently - (3-6 hours/day) · "C": Constantly - (6-8 hours/day) F: Climbing O: Balancing O: Stooping F: Kneeling F: Crouching F: Crawling F: Reaching C: Standing F: Sitting F: Walking F: Feeling F: Fingering F: Grasping F: Repetitive Motion F: Talking F: Hearing F: Pushing - Up to 25 lbs. F: Pulling - Up to 25 lbs. F: Lifting - Up to 25 lbs. O: Pushing - 26-50 lbs O: Pulling - 26-50 lbs. F: Lifting - 26-50 lbs. O: Pushing - Over 50 lbs. O: Pulling - Over 50 lbs. O: Lifting - Over 50 lbs. Environmental Conditions · "NA": Not Applicable · "O": Occasionally - (up to 3 hours/day) · "F": Frequently - (3-6 hours/day) · "C": Constantly - (6-8 hours/day) O: Inside conditions: Protection from weather but not necessarily from temperature change. F: Outside environmental conditions: No effective protection from weather. O: Extreme cold: Temperatures below 32 degrees for periods of more than one hour. F: Extreme heat: Temperatures above 100 degrees for periods of more than one hour. F: Noise: sufficient noise to cause the worker to shout to be heard above the ambient noise level F: Vibration: Exposure to oscillating movements of the extremities of whole body. F: Hazards: Includes a variety of physical conditions (i.e. proximity to moving mechanical parts, electrical current, working in high places, exposure to heat and/or chemicals. F: Atmospheric conditions: One or more of the following conditions that affect the respiratory system or the skin: Fumes, odors, dust, mists, gases or poor ventilation. F: Oils: There is air and/or skin exposure to oils and other cutting fluids. O: Air particulates / contaminants: the worker is required to wear respirator. RING POWER CORPORATION, INC. IS AN EQUAL OPPORTUNITY EMPLOYER Not ready to apply? Connect with us for general consideration.

Job Description A prestigious pathology group in the panhandle of Florida is currently looking for an experienced Florida-licensed cytologist for their busy high volume pathologist-owned group. The ideal candidate will be ASCP certified as well as licensed. This is a day shift position. Working at this regional pathology lab offers a strong mix of professional stability and employee benefits. They offer a competitive compensation package, comprehensive health insurance, paid time off, retirement contributions, and performance-based bonuses as well as opportunities for advancement, all within a collaborative, community-focused environment. Along with a competitive compensation package, this opportunity generously includes a $5,000 sign-on bonus. Tallahassee blends natural beauty with cultural vibrancy, making it an appealing place to live. The city experiences a humid subtropical climate, with average summer highs around 90°ree; and winter lows near 40°ree;, allowing for year-round outdoor activities like hiking in Alfred B. Maclay Gardens State Park, kayaking on Lake Jackson, or exploring nearby Gulf Coast beaches. Indoors, residents enjoy art galleries, live music, and college sports thanks to Florida State University and Florida A&M. With its rolling hills, affordable housing, and compact layout, Tallahassee offers a relaxed lifestyle with easy access to both nature and urban amenities. Job Summary: Analyze fluid and tissue specimens for microscopic cellular abnormalities. Work closely with pathologists and independently. Skill Requirements: Calibrate, operate, troubleshoot and maintain the equipment Dexterity and good hand-eye coordination are required to collect and prepare specimens Critical thinking skills to recognize problems and develop solutions or alternative approaches Lab safety and infection prevention is of paramount importance Handle pressure responsibility, often performing highly detailed microscopic work for long periods of time Responsibilities may include but not limited to: Examine cell samples to detect abnormalities in the color, shape, or size of cellular components and patterns Prepare and analyze samples, such as Papanicolaou (PAP) smear body fluids and fine needle aspirations (FNAs), to detect abnormal conditions Provide patient clinical data or microscopic findings to assist pathologists in the preparation of pathology reports Assist pathologists or other physicians to collect cell samples such as by fine needle aspiration (FNA) biopsies Submit slides with abnormal cell structures to pathologists for further examination Education, Certification, & Experience: Bachelor's degree in cytotechnology CT(ASCP) certification Florida license New grads are encouraged to apply Must be legally authorized to work in the US without sponsorship. HealthCare Connections, Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, sex, age, religion, national origin, disability, pregnancy, protected veteran status, sexual orientation, gender identity, genetic information or other protected status pursuant to law. #IND

Job DescriptionWho We Are: From Georgia. For Georgia. Since 1914 Yancey Bros. Co. has proudly served as the authorized Caterpillar equipment dealer for Georgia, providing our customers with the highest quality sales, parts, and service. From Caterpillar heavy and compact construction equipment to on-highway trucks, we remain committed to learning more about our customers, offering equipment and support to keep up with their changing needs. This all starts with our greatest asset…our employees. What You Will Be Doing: Are you planning to transition out of the military to the civilian sector? Do you enjoy working with your hands? Do you have a natural knack for fixing and repairing things? Are you interested in a career as a diesel technician? Yancey's SkillBridge Technician Apprenticeship is a training program for U.S. Military Service Members within or nearing 180-days of separation from active duty. You will complete a structured learning program that builds skill sets to become a Heavy Equipment Diesel Technician at Yancey Bros. Co. Topics will include: Basic hydraulics, electronics, and engines Business specific systems: SIS, ET, and Service Link Business specific procedures: SLAM reports and Service Report writing Yancey / CAT specific systems and repair procedures About the Program: Follow an outline of class material, hands-on training, and process / procedure experiences under the supervision of your mentor to prepare you for a career as a Heavy Equipment Diesel Technician. Includes a structured task / accomplishment check-in cycle. Education/Experience: 18 years of age or older. The knowledge, skills, and abilities typically acquired through the completion of a high school diploma and/or GED. This position is held exclusively for U.S. Military Service Members within or nearing 180-days of separation from active duty. Required Qualifications/Skills: No experience necessary. Meet Yancey employment requirements. All mechanical testing, background checks, and drug screening will be conducted. Environmental Job Requirements: Environment: Most of your time is spent standing/walking. Willing to work in extreme weather conditions and around loud noises. Physical: Will require appropriate Personal Protection Equipment to be worn. Able to operate and climb underneath equipment. Able to lift, carry, and lower up to 100 lbs. Travel: Not required. Who We Are Looking For: This position is held exclusively for U.S. Military Service Members within or nearing 180-days of separation from active duty. Preferred candidates will have a strong mechanical aptitude and desire to learn about diesel mechanics. The ability to take direction and work in a team environment is essential to this position.

Job DescriptionDescription: Petroleum Services Group, Inc. (PSG) is a Petroleum Service and Construction company with established accounts across Georgia and Florida. PSG is looking for a full time Environmental Testing Technician to work based out of our Waycross, GA office. The position will be primarily on the road servicing middle and west South Georgia. Environmental Testing Technician Essential Functions: Report to Service Manager and Environmental Compliance Manager Conduct various Environmental Tests required by the GA EPD on UST systems Install various types of fuel equipment including leak detectors, tank probes, sensors, overfill devices, etc Assess and provide maintenance to the UST system when applicable Ensure a safe working environment (i.e. use of proper PPE) Complete Environmental Testing Reports accurately and submit to Environmental Compliance Manager on time Complete accurate time sheets weekly and submitted on time Maintain all equipment and trucks in a clean and good working order Preferred experience: Current or Previous Estabrook's Training/Certification is a plus Petroleum Construction preferred but not required Electrical and/or Maintenance background a plus Experience with Microsoft Excel and Adobe PDF is a plus Job Type: Full-time hourly position (pay dependent on experience.) In addition to a competitive pay, we also offer: Medical/Dental/Vision/Supplemental Insurance, 401k + company match and paid vacation Requirements: Must maintain a current, valid, unrestricted driver's license with an insurable driving record and pass a pre-employment background check and drug screen. 40 Hour OSHA Hazwoper Training, 8 hour OSHA Supervisor Training a plus Certification and Training from Petroleum Equipment Manufacturer's a plus Valid Driver's License and good driving record required Ability to lift 75-100 pounds Ability to stand, bend, crouch for periods of time Ability to work well with others Must be self-directed, needing little supervision. Must be detail oriented Must be able to reliably report to work on time, as scheduled. Must be responsible, dependable, and acceptable to change.

About Us Tallahassee, a diverse community of nearly 200,000 residents, is the state capital and home to Florida A&M University, Florida State University, and Tallahassee State College. It is known for its national forest, freshwater lakes, and abundant parks and recreational activities. Located in the north-central portion of the state of Florida. The City, as an organization, has a devoted workforce of approximately 4,000 people who come together to ensure the needs of the community are met through municipal services. These services include Police, Fire, Utilities (electric, gas, water, wastewater, stormwater), Parks and Recreation, Aviation-Tallahassee International Airport, and general municipal services. The City's mission is to be the national leader in the delivery of public service. The City of Tallahassee's workforce is our community's lifeblood, we offer diverse career opportunities, a positive work-life balance, competitive compensation, exceptional wellness programs, and comprehensive benefits, all of which position us to be the premier employer of choice for this area. Deadline (Open Until Filled) Open until filled. Department Name Growth Management Job Specifications Employment Status: Full-Time Are you committed to protecting the environment while supporting safe and sustainable development? We are seeking a dedicated Engineering Technician IV to oversee site inspections, ensure regulatory compliance, and provide guidance to staff and the public on environmental matters. What You'll Do * Conduct mandatory environmental inspections for projects with management permits, including new construction and redevelopment sites. * Review construction sites for compliance with sediment run-off containment, stormwater management, tree impacts, regulated environmental feature protection, and approved plans. * Provide guidance to staff and respond to public inquiries regarding environmental concerns and tree impacts. * Support permit application reviews and ensure projects meet environmental regulations and best practices. * Review electronic submittals, including pre-construction meeting documents and project close-out materials, for accuracy and compliance. For the complete job specification, listing essential duties and desirable qualifications, go to ********************************************************* Minimum Training & Experience * Associates Degree in civil engineering, civil engineering technology or drafting and design; AND * Four (4) years of technical experience that includes computer aided drafting (AutoCAD) or surveying, OR * Four (4) years of technical engineering experience in the area of engineering to which the position is assigned; OR * High School diploma or GED; AND * Six (6) years of technical experience that includes computer aided drafting (AutoCAD) or surveying, OR * Six (6) years of technical engineering experience in the area of engineering to which the position is assigned Salary Range $21.6689 to $58.7999/hourly. Hiring rate generally will not exceed $39.2097/hour. Driver's License Requirements Must possess a valid Class-E State driver's license at the time of appointment. Benefits Information The City of Tallahassee offers a comprehensive benefits package, including: * Paid vacation, sick leave, parental, and catastrophic illness leave * Defined benefit pension and defined contribution plans * Paid holidays * Tuition reimbursement * Medical, dental, and vision insurance * Life and long-term disability insurance * Pre-paid legal, critical illness, and auto insurance plans For more information about benefits offered to eligible City employees, visit ALEX or 2025 Benefits Summary. Note: OPS employees are eligible for medical insurance plans but not eligible for paid vacation, paid sick leave, or paid holidays. Temporary employees (Non-OPS) are not eligible to participate in the City's benefits programs How To Apply Visit Talgov.com/Employment click on the 'Apply Today' button, then navigate to 'My Job Applications' icon, and create an account. Only online applications will be accepted for this vacancy. Remember, you must complete all sections of the application, including the education and work history section, even if this information is included on your resume. If you have any questions regarding this position or the application process, please contact the City's Human Resources and Workforce Development Department at ************. Equal Opportunity Employer: The City of Tallahassee is an Equal Opportunity Employer committed to promoting equity and celebrating diversity. The City of Tallahassee invites applications without regard to an individual's race, color, gender, religion, national origin, age, disability, marital status, pregnancy, sexual orientation, gender identity, veteran status, or any other characteristics protected by law. Veterans' Preference: Certain service members and veterans, and the spouses of the service members and veterans, will receive preference and priority, and certain service members may be eligible to receive waivers for postsecondary educational requirements. For information on who may be eligible for Veterans' Preference, go to ************************************************************** or call Human Resources & Workforce Development at **************.To claim Veterans' Preference, applicants must upload a DD-214 (and other documentation, as applicable) with their online application prior to the closing date of the job opening. Accommodation for Persons with a Disability: If you require an accommodation, as defined by the Americans with Disabilities Act, please contact the City's ADA Coordinator, in the Office of Diversity & Inclusion, at ************ or at ***************** Monday through Friday, between 8 a.m. and 5 p.m., or TDD 711, at least 48 hours, (excluding weekends and holidays), prior to the application deadline. Apply for Job * Careers * Sign In * New User

Job DescriptionDescription: Great Southern Equipment is a full line distributor supplying heavy and compact equipment across the State of Florida. We opened our doors in 1960 and have grown to 7 locations servicing all of Florida with the following product lines: Hitachi, Linkbelt, Liebherr, Vacall, Gradall, Sakai, & Kaiser. We hire individuals who exhibit the following COMPANY CORE VALUES: Authenticity, Hard Working, Professional, Loyal, and Solution Driven. Responsible for repair and maintenance of customer and company owned heavy equipment at the branch and in the field at customer sites Professionalism - we value teamwork, creating a cohesive work environment, and pride ourselves on the service we provide our customers. Repair and maintain heavy equipment at our facilities and in the field Communicate with customers Ability to read hydraulic and electrical schematics Desire to learn Document time and notations from jobs Work with teammates Other duties as assigned by management Requirements: Valid driver's license and must meet General Liability driving requirements in order to operate a company vehicle when necessary. Pass a DOT physical Lift parts (10-100 lbs) regularly Have own tools necessary to complete jobs Operation of forklift required Climbing stairs/ladders to reach all portions of equipment Basic computer skills Ability to travel as needed for jobs and schooling The position of Field Service Technician is classified as a safety-sensitive position.

Appliance and Refrigeration Repair Technician Why an Appliance Repair Technician career might be right for you: You like solving problems - Each repair is different. You enjoy diagnosing problems and figuring out solutions. You like fixing things - Getting things working again is a satisfying outcome. You did that! You like helping others - You're the hero of the home, fixing essential appliances and lifting that weight off the shoulders of grateful homeowners. You like to be on the move - You're on the road and welcomed into customers' homes every day. Why a career with Sears Home Services is right for you: Great hourly rates - $18 - $30 / hourly base rate, depending on experience, certification and location. Benefits - Comprehensive set of medical, dental, and vision benefits with an additional employer-paid health care subsidy for any dependent tier medical plan enrollment under the Transform Health and Welfare Plan. Specifically, each eligible employee may receive up to $4,000 annually towards the cost of your dependent tier health coverage each year, prorated throughout the plan year. 401k match - Opportunity to contribute to 401k plan, with an employer match calculated on your before-tax contributions, 100% on the first 3% of salary. More ways to earn -Technicians have the opportunity to earn additional performance bonuses & sales incentives throughout the year. Year-round work - With Sears large scale and wide product range, Sears cross trains techs and keeps them busy year round. Expert training - Best in class training program. Tens of thousands of repair techs have been trained by Sears Technical Institute in the past 60 years. Peer mentoring - Onboarding buddy and mentor technicians to help you grow your skills. Career advancement - Many ways to advance and cross-train to keep growing your career. Our average tenure is >12 years! Tools Provided - Sears provides company vehicle, uniforms, specialty tools, mobile phone & industry-leading app that eliminates paperwork and provides technical support. Job responsibilities: Drive to multiple customer's homes daily to diagnose and repair a variety of home appliances with high levels of quality and efficiency; appliances may include refrigerators, washers, dryers, dishwashers, and microwaves Deliver excellent customer experience that exceeds expectations consistently Provide customers with value-added solutions that help make their home more clean, comfortable & protected Keep company truck well-maintained & organized, and help manage parts efficiently Performs other duties as assigned Requirements: High school diploma or general education degree EPA Type I or EPA Universal certification Mechanical knowledge and aptitude, including use of testing & repair tools Experience repairing and diagnosing a variety of home appliances preferred Can follow directions and processes for quality workmanship Can use smartphone, including use for part ordering Successfully pass a background & drug screen Valid driver's license for the state(s) in which you work Ability to travel up to 100% Ability to work variable and flexible hours, including required overtime Ability to read, understand, and apply written text of a technical nature to answer questions, solve problems, and complete job tasks Excellent communication skills, both verbal and written; Ability to read, write, and speak English Ability to constantly lift, carry, push, or pull up to 20 lbs (frequently lift, carry, push, or pull 50 lbs; occasionally lift, carry, push, or pull 100 lbs) Ability to constantly reach outward, handle and finger objects, stand, walk, sit and type using a keyboard Ability to frequently bend, squat, kneel, twist, turn, stoop, climb, and crawl Ability to occasionally reach above shoulder Ability to drive automatic transmission vehicle

Click on "Learn more about this agency" button below for IMPORTANT additional information. This is a Direct Hire Solicitation. This public notice is to gather applications that may or may not result in a referral or selection. Click on "Learn more about this agency" button below for IMPORTANT additional information. This is a Direct Hire Solicitation. This public notice is to gather applications that may or may not result in a referral or selection. Overview Help Accepting applications Open & closing dates 12/22/2025 to 12/21/2026 Salary $63,795 to - $164,301 per year Pay scale & grade GS 11 - 15 Locations Few vacancies in the following locations: Eielson AFB, AK Elmendorf AFB, AK Fort Richardson, AK Maxwell AFB, AL Show morefewer locations (79) Little Rock AFB, AR Davis Monthan AFB, AZ Luke AFB, AZ Beale AFB, CA Edwards AFB, CA El Segundo, CA Los Angeles, CA March AFB, CA Travis AFB, CA Vandenberg AFB, CA Air Force Academy, CO Buckley AFB, CO Cheyenne Mountain AFB, CO Colorado Springs, CO Peterson AFB, CO Schriever AFB, CO Joint Base Anacostia-Bolling, DC Dover AFB, DE Cape Canaveral, FL Cape Canaveral AFS, FL Eglin AFB, FL Homestead AFB, FL Hurlburt Field, FL MacDill AFB, FL Patrick AFB, FL Tyndall AFB, FL Dobbins AFB, GA Moody AFB, GA Robins AFB, GA Hickam AFB, HI Mountain Home AFB, ID Scott AFB, IL Grissom AFB, IN Barksdale AFB, LA Hanscom AFB, MA Westover Air Reserve Base, MA Andrews AFB, MD Linthicum Heights, MD Selfridge ANG Base, MI Whiteman AFB, MO Columbus AFB, MS Keesler AFB, MS Malmstrom AFB, MT Grand Forks, ND Minot AFB, ND Offutt AFB, NE New Boston, NH McGuire AFB, NJ Cannon AFB, NM Holloman AFB, NM Kirtland AFB, NM Nellis AFB, NV Niagara Falls, NY Wright-Patterson AFB, OH Youngstown, OH Youngstown, OH Altus AFB, OK Tinker AFB, OK Vance AFB, OK Charleston, SC Shaw AFB, SC Arnold AFB, TN Dyess AFB, TX Fort Sam Houston, TX Goodfellow AFB, TX Kelly AFB, TX Lackland AFB, TX Laughlin AFB, TX Randolph AFB, TX Hill AFB, UT Alexandria, VA Arlington, VA Dahlgren, VA Fort Eustis, VA Langley AFB, VA Pentagon, Arlington, VA Fairchild AFB, WA McChord AFB, WA Warren AFB, WY Remote job No Telework eligible No Travel Required Occasional travel - You may be expected to travel for this position. Relocation expenses reimbursed No Appointment type Multiple Work schedule Full-time Service Competitive Promotion potential 15 Job family (Series) * 0855 Electronics Engineering Supervisory status No Security clearance Secret Drug test No Position sensitivity and risk Noncritical-Sensitive (NCS)/Moderate Risk Trust determination process * Suitability/Fitness Financial disclosure No Bargaining unit status No Announcement number AFPCDHA-12857056-0855-CYBER Control number 852987000 This job is open to Help The public U.S. Citizens, Nationals or those who owe allegiance to the U.S. Clarification from the agency This public notice is to gather applications that may or may not result in a referral or selection. Duties Help * Duties and responsibilities vary and may increase according to grade level * Use engineering manuals, standard publications, and technical material to obtain information and pertinent data for use by higher level engineers, contractors and/or customers. * Keep abreast of emerging technologies and professional developments to maintain currency in the field and for application to work assignments. * Perform duties in support of the installation, operations, and maintenance of weapon systems, subsystems, facilities, machinery, and/or support equipment. * Perform developmental assignments in the application of established principles, techniques, methods, and procedures of professional electronics engineering in the area of installation, operations, and maintenance. Requirements Help Conditions of employment * Please read this Public Notice in its entirety prior to submitting your application for consideration. * U.S. Citizenship is required * Males must be registered for Selective Service, see *********** * Total salary varies depending on location of position * If authorized, PCS will be paid IAW JTR and AF Regulations. If receiving an authorized PCS, you may be subject to completing/signing a CONUS agreement. More information on PCS requirements, may be found at: ***************************************** * Recruitment incentives may be authorized * Position may be subject to random drug testing * Employee may be required to work other than normal duty hours, to include evenings, weekends and/or holidays * Shift work and emergency overtime may be required * Employee must maintain current certifications * A security clearance may be required * Disclosure of Political Appointments * Full/part-time employees occupying direct childcare positions are eligible for discounts IAW DAF AFSVC/CC Memo, 30 Sep 22; first child 100% / each additional child 25%. Other assigned CYP and FCC personnel are eligible for 25% discount. Qualifications BASIC REQUIREMENT OR INDIVIDUAL OCCUPATIONAL REQUIREMENT: A. Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR B. Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below: SPECIALIZED EXPERIENCE: GS-11: At least one year of specialized experience equivalent to at least the GS-09 level in the Federal service, which has equipped the applicant with the particular knowledge, skill, and abilities to successfully perform the duties of the position. Experience: Examples of this experience includes: Modeling and simulation professional theories, concepts, principles, techniques, and practices of computer engineering, electronics engineering and/or computer science. GS-12: At least one year of specialized experience equivalent to at least the GS-11 level in the Federal service, which has equipped the applicant with the particular knowledge, skill, and abilities to successfully perform the duties of the position. Experience: Examples of this experience includes: Leading and/or performing engineering work involving electronic circuits, circuit elements and equipment systems; applying a number of diverse electronics engineering practices, techniques and processes to identify and resolve complex engineering issues; supporting the planning, testing and troubleshooting of electronics engineering systems or devices; and, developing computer aided engineering analysis and tools in support of planning and designing applications. GS-13: At least one year of specialized experience equivalent to at least the GS-12 level in the Federal service, which has equipped the applicant with the particular knowledge, skill, and abilities to successfully perform the duties of the position. Experience: Examples of this experience includes supporting the planning, execution, and instrumentation of electronics engineering tests; providing engineering support for tests, assessments, experiments and system evaluations; coordinating and directing the activities of engineers in the operation and maintenance of advanced hardware and facilities assessing the vulnerability of systems and subsystems; and developing analytical methods, tools, standards, and models and simulations used in electronics engineering and test planning. GS-14: At least one year of specialized experience equivalent to at least the GS-13 level in the Federal service, which has equipped the applicant with the particular knowledge, skill, and abilities to successfully perform the duties of the position. Examples of this experience includes supporting the planning, execution, and instrumentation of electronics engineering tests; providing engineering support for tests, assessments, experiments and system evaluations; coordinating and directing the activities of engineers in the operation and maintenance of advanced hardware and facilities assessing the vulnerability of systems and subsystems; and developing analytical methods, tools, standards, and models and simulations used in electronics engineering and test planning. GS-15: At least one year of specialized experience equivalent to at least the GS-14 level in the Federal service, which has equipped the applicant with the particular knowledge, skill, and abilities to successfully perform the duties of the position. Examples of this experience includes supporting the planning, execution, and instrumentation of electronics engineering tests; providing engineering support for tests, assessments, experiments and system evaluations; coordinating and directing the activities of engineers in the operation and maintenance of advanced hardware and facilities assessing the vulnerability of systems and subsystems; and developing analytical methods, tools, standards, and models and simulations used in electronics engineering and test planning. KNOWLEDGE, SKILLS AND ABILITIES (KSAs): * Knowledge of electronics engineering concepts, principles, methods, techniques, and standard engineering practices to perform moderately difficult or relatively limited phases of a larger and more complex installation, operations, and maintenance engineering project. * Knowledge of computer aided design and drafting (CADD) programs to perform design and drafting assignments, as well as other computer applications used in support of plans, analysis, and project reports. * Skill in applying the principles, concepts, and practices of the occupation sufficient to perform limited assignments in the field of electronics engineering. * Ability to communicate factual and procedural information clearly, orally and in writing. PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week. VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience. Education IF USING EDUCATION TO QUALIFY: If position has a positive degree requirement or education forms the basis for qualifications, you MUST submit transcriptswith the application. Official transcripts are not required at the time of application; however, if position has a positive degree requirement, qualifying based on education alone or in combination with experience; transcripts must be verified prior to appointment. An accrediting institution recognized by the U.S. Department of Education must accredit education. Click here to check accreditation. FOREIGN EDUCATION: Education completed in foreign colleges or universities may be used to meet the requirements. You must show proof the education credentials have been deemed to be at least equivalent to that gained in conventional U.S. education program. It is your responsibility to provide such evidence when applying. Additional information For Direct Hire (DHA) Positions: This is a Direct Hire Public Notice, under this recruitment procedure applications will be accepted for each location/ installation identified in this Public Notice and selections are made for vacancies as they occur. There may or may not be actual/projected vacancies at the time you submit your application. Interagency Career Transition Assistance Program (ICTAP): For information on

Requisition No: 860473 Agency: Department of Corrections Working Title: Engineering Technician IV - Statewide Pay Plan: Career Service Position Number: 70066666 Salary: $62,456.94 - $67,316.86 annually Posting Closing Date: 04/01/2026 Total Compensation Estimator Tool FLORIDA DEPARTMENT OF CORRECTIONS We Never Walk Alone Engineering Technician IV - WWTP This open competitive advertisement is for a Career Service position located at various Correctional Institutions in the Maintenance Department statewide. The mission of Facilities Management and Building Construction at the Florida Department of Corrections is to provide a safe, secure, and efficient environment for staff, inmates, and visitors. This is achieved through the effective management, maintenance, and construction of correctional facilities, ensuring they meet all regulatory standards and support the department's overall mission of public safety and rehabilitation. This position is not a telework position and is required to report to the FDC office in the area it serves. JOB DUTIES: This working position is responsible for the Waste/Wastewater Treatment Plant at a Correctional Institution both in operations and maintenance. This position also instructs inmates in the special skills necessary to operate a Water and Wastewater Treatment Plant through an apprentice on-the-job training program designed to develop experience and skills necessary to assume and fulfill the position of Operator of a water or sewer utility. * Operates and maintains Water Treatment and Wastewater Treatment Plants in compliance with DEP permits and regulations. * Conducts preventive maintenance for both plants, orders, and stocks necessary chemicals. * Repairs breakdowns at the operator level and troubleshoots specialized equipment such as compressors, pumps, air blowers, and chlorinators. * Cleans bar screens, grit chambers, settling, and sludge beds, and performs various water quality tests. * Prepares operational reports, maintains logs, and supervises inmates, preparing progress reports for their rehabilitation. BENEFITS: * Paid vacation, sick leave, and holidays. * Comprehensive health insurance and life insurance with accidental death and dismemberment benefits. * Supplemental Dental, Vision, Life, Disability and Hospitalization insurance. * Tuition-Free college courses. * Retirement Plans with the Florida Retirement System: * Pension Plan (Traditional Retirement Pension Plan) * Investment Plan (401(K)-Type Retirement Plan) * Deferred Retirement Option Program (Drop) * Deferred Compensation * Recently Retired? Beginning July 1, 2024, there is no longer a reemployment limitation; beginning with the 7th calendar month from the member's distribution date, there are no restrictions on working for an FRS employer. You will not be required to repay any prior distributions, and you may continue receiving distributions from the Investment Plan or Pension Plan without interruption. REQUIREMENTS: * A Class C Water and/ or Wastewater Treatment Plant Operator License or higher * A Valid Class E Driver's License Support of knowledge, skills, and abilities should be demonstrated on the application, in the education, in the work experience, in the work sample, in the interview and/or during reference checks. ADDITIONAL INFORMATION: BACKGROUND SCREENING REQUIREMENT The Florida Department of Corrections requires all job applicants and volunteers to pass a Level 2 background check as per Chapter 435, Florida Statutes. This check must be completed before they can start working or volunteering. EMPLOYMENT ELIGIBILITY The Florida Department of Corrections (FDC) only hires U.S. citizens and those authorized to work in the U.S. FDC uses E-Verify to confirm an employee's eligibility to work after completing the I-9 form. For online application issues, call the People First Service Center at **************. Applications will be accepted until 11:59 PM EST on the closing date. The State of Florida is an Equal Opportunity Employer/Affirmative Action Employer, and does not tolerate discrimination or violence in the workplace. Candidates requiring a reasonable accommodation, as defined by the Americans with Disabilities Act, must notify the agency hiring authority and/or People First Service Center (***************. Notification to the hiring authority must be made in advance to allow sufficient time to provide the accommodation. The State of Florida supports a Drug-Free workplace. All employees are subject to reasonable suspicion drug testing in accordance with Section 112.0455, F.S., Drug-Free Workplace Act. VETERANS' PREFERENCE. Pursuant to Chapter 295, Florida Statutes, candidates eligible for Veterans' Preference will receive preference in employment for Career Service vacancies and are encouraged to apply. Certain service members may be eligible to receive waivers for postsecondary educational requirements. Candidates claiming Veterans' Preference must attach supporting documentation with each submission that includes character of service (for example, DD Form 214 Member Copy #4) along with any other documentation as required by Rule 55A-7, Florida Administrative Code. Veterans' Preference documentation requirements are available by clicking here. All documentation is due by the close of the vacancy announcement. Location:

The Electronic System Technician works a team of 3 electricians: 2 electrical systems technicians and 1 working supervisor. The team is tasked with maintaining all electrical systems at the City of Valdosta's water treatment facilities. This includes 2 wastewater treatment plants, 36 wastewater pumping stations, and 1 drinking water treatment plant. Work entails maintaining and repairing automated industrial control systems and their associated equipment, along with occasional facilities maintenance type tasks such as maintaining lighting and receptacles. Networking/IT type tasks, as well as various programming tasks will also be required. Overtime/after-hours emergency work is occasionally required. Requirements Ability to accurately and clearly articulate technical electrical information, questions and/or concerns to coworkers, supervisors, vendors and contractors Ability to operate various hand and power tools, test equipment, and laptop computers Ability to organize and maintain good condition of spare parts, documents, work vehicle, tools, test equipment, PPE, etc. Ability to efficiently document and organize various part numbers, statistics, data, drawings, manuals, job write-ups, etc. Possess and maintain a valid State of Georgia Class C Driver's License Basic knowledge of electrical control components such as fuses, breakers, contactors, transformers, relays, timers, starters, overloads, status indicators, surge arrestors, float switches, pressure switches, limit switches, proximity switches, temperature switches, leak sensors, etc. Experience with single phase AC electrical systems up to 240 VAC Experience with three phase AC electrical systems up to 480 VAC, including “High Leg Delta” systems Experience with 12 and 24 VDC electrical systems Ability to read single line drawings and other electrical prints/drawings Ability to use a multimeter to safely and efficiently test voltage, amperage, continuity and signal loops Ability to work safely and quickly under pressure on time sensitive tasks Ability to safely troubleshoot in a live (up to) 480VAC control panel Knowledge of proper lockout/tagout procedures Awareness of the dangers of arc flash and arc blast and how to select the appropriate PPE for a task Familiar with safe hot-work practices Familiar with working safely around capacitors, hydraulic machinery and other stored energy equipment Familiar with general industrial jobsite safety such as working from heights (on ladders or in man lifts), in trenches, in confined spaces, near open pits/basins, and around machinery and moving parts. Possession of or ability to readily obtain a valid driver's license issued by the State of Georgia for the type of vehicle or equipment operated. Salary Description $25.36