Electronics technician jobs in Tiverton, RI - 550 jobs

This is a travel role- folks need their own reliable car and be okay with traveling to different sites Win 11 Deployment project (travel is required) This goes through June 2026 right now Must meet all medical compliance for a hospital (drug and medical) This healthcare client is undergoing a Windows 11 upgrade project. This includes upgrades in all the hospital and ambulatory site locations. This will be about 5-6,000 devices that need upgrading. Deployment will be via thumb drive and automated / scripted. This candidate needs imaging/deployment experience. This person will not be doing hard work and will only be on contract until all the devices are deployed (expected to finish up in December). * Are looking for bringing on 20 contractors for a Windows 11 deployment. * Target start date of end of September * Multiple regions / Sites. * Drug, BG, medical + vax. * 1 round virtual screening call (10-15 minutes long) *Skills* Hardware Support, Windows 10, Desktop, Windows, Support, Troubleshooting *Job Type & Location*This is a Contract position based out of Norwich, CT. *Pay and Benefits*The pay range for this position is $18.00 - $22.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: * Medical, dental & vision * Critical Illness, Accident, and Hospital * 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available * Life Insurance (Voluntary Life & AD&D for the employee and dependents) * Short and long-term disability * Health Spending Account (HSA) * Transportation benefits * Employee Assistance Program * Time Off/Leave (PTO, Vacation or Sick Leave) *Workplace Type*This is a fully onsite position in Norwich,CT. *Application Deadline*This position is anticipated to close on Jan 25, 2026. h4>About TEKsystems: We're partners in transformation. We help clients activate ideas and solutions to take advantage of a new world of opportunity. We are a team of 80,000 strong, working with over 6,000 clients, including 80% of the Fortune 500, across North America, Europe and Asia. As an industry leader in Full-Stack Technology Services, Talent Services, and real-world application, we work with progressive leaders to drive change. That's the power of true partnership. TEKsystems is an Allegis Group company. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. About TEKsystems and TEKsystems Global Services We're a leading provider of business and technology services. We accelerate business transformation for our customers. Our expertise in strategy, design, execution and operations unlocks business value through a range of solutions. We're a team of 80,000 strong, working with over 6,000 customers, including 80% of the Fortune 500 across North America, Europe and Asia, who partner with us for our scale, full-stack capabilities and speed. We're strategic thinkers, hands-on collaborators, helping customers capitalize on change and master the momentum of technology. We're building tomorrow by delivering business outcomes and making positive impacts in our global communities. TEKsystems and TEKsystems Global Services are Allegis Group companies. Learn more at TEKsystems.com. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

TSC is seeking an entry level Elecrtomechanical Technician with experience or interest in cable assemblies, electronic components, and precision mechanical work to support work in our Plymouth, MA location. The ideal candidate is hands-on, detail-oriented, and knowledgeable about manufacturing best practices within an ISO9000-compliant environment. Key Responsibilities Manufacture and assemble electronic assemblies, including: Soldering (surface-mount and through-hole) Crimping a wide range of terminals and connectors Heat-shrink applications and harness routing Work with printed wiring assemblies (PWAs) and printed circuit boards (PCBs), including component installation, inspection, and rework. Fabricate and modify sheet metal components using shop tools. Operate machinery such as but not limited to: drill press, precision hand tools, measurement and inspection equipment (calipers, micrometers, torque tools), torque fasteners and mechanical assemblies to specified values using calibrated tools. Follow all manufacturing best practices, workmanship standards, and engineering documentation (schematics, drawings, work instructions, travelers). Ensure work adheres to ISO9000 quality management procedures. Conduct in-process inspections and maintain accurate production records. Collaborate with engineering, quality, and production teams to support continuous improvements. Required Qualifications 1-2 years of experience in a manufacturing or an electronics assembly role (or equivalent hands-on background) US Citizenship and the ability to obtain and maintain a government security clearance. Proficiency in electrical cable assembly and soldering (IPC-620 or IPC-610 certification is a plus), crimping and use of manual/automated crimp tools Efficient in PCB handling and ESD-safe work practices Strong mechanical aptitude and ability to read engineering drawings. Understanding of ISO9000 or similar quality standards. Ability to work independently, manage multiple tasks, and meet production deadlines. Strong attention to detail, quality, and safety. TSC Benefits: TSC offers a stable work environment, a competitive salary, and a comprehensive benefit package; including Employee Stock Option Plan (ESOP) participation, 401k Plan, Flexible Work Schedules, Tuition Reimbursement, Co-Sponsored Health Plan, Paid Leave and much more. TSC is a growing organization with unlimited opportunity! Applying to TSC: Only those candidates invited for an interview will be contacted. Employment at TSC is contingent upon the successful completion of a comprehensive background check, security investigation, and a drug screening. This contractor and subcontractor shall abide by the requirements of 41 CFR 60-1.4(a), 60-300.5(a) and 60-741.5(a). These regulations prohibit discrimination against qualified individuals based on their status as protected veterans or individuals with disabilities, and prohibit discrimination against all individuals based on their race, color, religion, sex, sexual orientation, gender identity, national origin, or for inquiring about, discussing, or disclosing information about compensation. Moreover, these regulations require that covered prime contractors and subcontractors take affirmative action to employ and advance in employment individuals without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Electronics Technician KiddeFenwal, LLC KiddeFenwal is the global market leader in designing and manufacturing innovative industrial and commercial fire suppression systems and safety controls. Our proprietary, fully certified offerings save lives, protect property, and minimize business interruption. Our brands-Kidde Fire Systems and Kidde Fire Protection-deliver highly engineered fire suppression, detection, and control systems across industrial, commercial, and marine sectors. Fenwal Controls supports OEMs with gas ignition, temperature control, and overheat detection products. Headquartered in Ashland, Massachusetts, KiddeFenwal operates globally, with facilities in the U.S., United Kingdom (KFI-UK), and India (KTI-India). Learn more at ******************* Our Purpose We protect lives, livelihoods, and iconic assets through innovative solutions, strong partnerships, and exceptional customer experiences. Built on a foundation of integrity and safety, we drive results with speed and excellence while fostering innovation and teamwork. Position Summary The key responsibilities include Work under limited supervision to provide technical support and task ownership to electrical engineers on a variety of engineering tasks. Execution of functional and environmental testing of electronic boards/control panel and associated equipment. Perform fault isolation testing on systems and equipment and assist engineers in determining methods or actions to remedy malfunctions. Perform soldering, wiring, fixture setup as required. Work with regulatory engineers for lab qualification program for regulatory agency testing Documentation of results and tracking of units under test (UUTs) using internally developed practices and procedures. Maintain inventory of piece parts that support the delivery of rapid prototypes. Collaborate with colleagues to maintain and manage inventory of key electronic equipment and assemblies. Participate in team meetings, providing accurate status, raising issues and risks. Actively participate in, and maintain strict compliance to, all company Policies and Procedures. All other duties as assigned This position reports to the Sr. Engineering Manager and involves collaboration with engineering teams. Experience and Competencies Experience with execution of functional and environmental testing of electronic devices. Hands-on experience with component-level troubleshooting of analog and digital circuits. Proficient in use and operation of electronic lab tools/equipment such as oscilloscopes, power meters, frequency counters, multimeters, temperature/environmental chambers, and spectrum analyzers. Experience documenting test procedures and communicating results to internal customers and regulatory agencies for product certification Able to read and interpret engineering drawings, electrical schematics, test data, test procedures and specifications Able to maintain and update equipment calibration records, test setup details, test records for agency review Able to quickly adjust to shifting priorities, perform and deliver in a fast-paced environment Self-motivated team-oriented individual who has the ability to work efficiently and safely in a laboratory environment with clear direction and minimal supervision Basic Qualifications Min. AA/AS degree (or other 2-year post high school training) Min. 3 years of relevant experience Preferred Qualifications/Competencies Experience documenting test procedures and communicating results to internal customers. Experience in understanding/developing programming / test fixtures Solid written and verbal communication skills Proficient in use of Microsoft Word, Outlook, and Excel software. Experience with test facility and equipment maintenance and management. Experience with use of Data Acquisition Equipment, i.e. National Instruments Lab View. Familiarity with C programming language and PIC family of microprocessors. Experience working with non-US based teams and suppliers. Sensitivity to cultural biases and understanding the communication practices needed to create successful partnerships in and open and supportive environment. KiddeFenwal, LLC. is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other federally protected class.

The Military Field Service Representative (FSR) located in Tolemaida, Colombia, will support the Colombian military in their operation, management, repair, installation, and maintenance of assigned GE equipment for starting up and operating a T700 engine depot. In this role, the FSR will act as a liaison between GE Aerospace and the customer. Candidates must be mobile to meet the needs of the customer, program and business. **Job Description** **Job Title** T700 Depot Military Field Service Representative - Tolemaida, Colombia **Company Intro/About GE Aerospace** GE Aerospace is a world-leading provider of jet engines, components, and integrated systems for commercial and military aircraft. We power flight safely and reliably for today, tomorrow, and the future, partnering closely with customers to deliver high-quality outcomes with speed and efficiency. **Site, Business, OR Functional Area Overview** This role supports the startup and sustained operation of a T700 engine depot in Tolemaida, Colombia, serving the Colombian military's helicopter fleet. The Field Service organization is focused on operational readiness, on-time delivery, and cost-effective maintenance solutions that meet contractual and mission requirements. **Role Overview** The Military Field Service Representative (FSR) will serve as GE Aerospace's on-site liaison to the Colombian military, supporting depot startup and ongoing repair, installation, troubleshooting, and maintenance activities for T700 turboshaft engines. The FSR will coordinate technical support, drive issue resolution, and enable customer success while meeting contractual, safety, and quality objectives. **Key Responsibilities** + Act as the single point of contact to the customer for timely resolution of depot-level tooling, maintenance, repair, and engine management concerns + Establish and maintain strong on-site relationships to provide ongoing technical and business support + Provide hands-on technical assistance leveraging in-depth knowledge of T700 installation, operation, and troubleshooting to keep the customer on schedule + Use disciplined analytical methods to drive root-cause analysis; create presentations and spreadsheets (including pivot tables and Pareto charts) to track issues and implement lasting corrective actions + Exercise sound judgment to propose solutions beyond set parameters for complex maintenance and troubleshooting scenarios, drawing on internal and external resources + Lead low-risk projects and serve as a resource for colleagues; explain technical concepts and build consensus across maintenance, engineering, and management stakeholders + Uphold and promote safety, quality, delivery, and cost objectives; ensure compliance with export control and security requirements **Required Qualifications** + Fluent in Spanish and English (reading, writing, and speaking) + Bachelor's degree from an accredited college or university; or a High School Diploma/GED plus a minimum of 4 years in a field service representative or jet engine maintenance role + Minimum 3 years of field maintenance, modification, and repair experience on T700 engines + Strong oral and written communication skills with demonstrated ability to analyze and resolve problems + Ability and willingness to travel as required + Ability and willingness to obtain and maintain a U.S. Government security clearance **Desired Characteristics** + 5+ years of hands-on turboshaft engine maintenance experience + T700 experience across depot, organizational, intermediate, and flight line troubleshooting levels + Strong customer interaction and communication skills; proven leadership abilities + Demonstrated proficiency in repair troubleshooting, shop operations, testing of jet engines, and support equipment tooling + Ability to make formal presentations to maintenance, engineering, and management at all levels + Project management experience; ability to lead and influence customers and peers + Experience mentoring and transferring technical knowledge; strong written and oral communication + Ability to work independently with technical guidance as needed + High degree of tact and diplomacy to collaborate effectively with customers at all levels + FAA Powerplant license (preferred) **Additional Information** The base pay range for this position is $100,000.00-133,000.00 USD Annual The specific pay offered may be influenced by a variety of factors, including the candidate's experience, education, and skill set. This position is also eligible for an annual discretionary bonus based on a percentage of your base salary/ commission based on the plan. This posting is expected to close on January 23rd, 2026 GE Aerospace offers comprehensive benefits and programs to support your health and, along with programs like HealthAhead, your physical, emotional, financial and social wellbeing. Healthcare benefits include medical, dental, vision, and prescription drug coverage, access to a Health Coach from GE Aerospace; and the Employee Assistance Program, which provides 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Aerospace Retirement Savings Plan, a 401(k) savings plan with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits includ tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time -off for vacation or illness. GE Aerospace (General Electric Company or the Company) and its affiliates each sponsor certain employee benefit plans or prog rams (i.e., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. © 2023 GE Aerospace and/or its affiliates. All rights reserved. Attorney-Client Privileged **Closing** At GE Aerospace, we are committed to fostering an inclusive workplace that values diversity and empowers employees to thrive. This role requires access to U.S. export-controlled information. Therefore, for applicants who are not asylees, refugees, lawful permanent residents, or U.S. Citizens (i.e., not a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3), otherwise known as a U.S. Person), final offers will be contingent on the ability to obtain authorization for access to U.S. export-controlled information from the U.S. Government. Closing At GE Aerospace, we are committed to fostering an inclusive workplace that values diversity and empowers employees to thrive. This role requires access to U.S. export-controlled information. Therefore, for applicants who are not asylees, refugees, lawful permanent residents, or U.S. Citizens (i.e., not a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3), otherw _This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3))._ **Additional Information** GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** Yes \#LI-Remote - This is a remote position GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

TOMRA of North America is a top International Reverse Vending and Recycling Company. At TOMRA transformation is at the heart of everything we do. We transform ideas & technology to create intelligent and pioneering tools to support a sustainable future.

We have an exciting opportunity to join us in supporting one of our valued customers as an Electronic Warfare SME supporting United States Special Operations Command (USSOCOM) and Special Operations Forces (SOF). Various Locations: Fort Belvoir, VA; Fort Bragg, NC; Lexington, KY; Fort Eustis, VA; Natick, MA * This position is contingent upon a contract award* Essential Duties: * Assist the SGM and Deputy for TT as the EW SME working in collaboration with government partners, academic laboratories, and private industry - to develop new tools and technology in support of the SOF Electronic Warfare community. * Assist in the preparation and development of new requirements documentation to include Initial Capabilities Documents (ICD), Capabilities Development Documents (CDD), SPECAT messages, Basis of Issue Plans (BOIP), Test Plans, and update Project Folders. * Tasks include the identification and development of Radio Detection and Ranging (RADAR) and Electronic Counter Measures (ECM), Intelligence, Surveillance, and Reconnaissance (ISR), Electronic Warfare (EW), and Signals Intelligence (SIGINT) for further development or fielding in support of SOF. Required Qualifications: * Qualifications include a background in EW, RADAR, ECM, ISR, EW, and SIGINT operations (particularly SOF) with a knowledge of EW techniques, tactics, & procedures. * 12+ years of relevant experience * Excellent communication, technical writing, and presentation skills. * Familiarity with DoD acquisition lifecycle and rapid prototyping processes. * Prior experience supporting USSOCOM, SOF AT&L, or other SOF components. (preferred). Education: Bachelor's or Master's degree in a related field Required Clearance: TS/SCI Travel: TBD Why Join USfalcon? * Mission-Focused Culture - Join a company deeply embedded in supporting defense, aerospace, and federal initiatives. * Career Growth & Development - Access training, mentorship, and advancement opportunities within a growing mid-tier defense contractor. * Trusted Industry Partner - Be part of a company with nearly 30 years of continuous service to DoD and federal clients.

BAS Controls Technician - Providence, RI - $36.00-$52.00/hr - Commercial, Healthcare & Institutional Facilities About the Opportunity A growing Building Automation & HVAC Controls contractor is seeking a skilled BAS Controls Technician to support projects throughout the Providence metro and surrounding Rhode Island region. This role focuses on installing, commissioning, troubleshooting, and servicing modern DDC/BAS systems in commercial, healthcare, university, and municipal facilities. Position Details Title: BAS Controls Technician Location: Providence, RI Employment Type: Full-Time Compensation & Benefits Hourly Rate: $36.00 - $52.00/hr (DOE) Overtime: Regularly Available Vehicle: Company Vehicle or Monthly Allowance Medical, Dental & Vision Insurance 401(k) with Company Match Paid Vacation, Sick Leave & Holidays Technical Training & Certification Support (Niagara, Siemens, JCI, etc.) About the Role The Providence region continues to expand in education, healthcare, biotech research, and public-sector infrastructure. This position offers long-term stability and consistent project demand for experienced BAS professionals. Key Responsibilities Install, configure, and commission BAS/DDC control systems Perform point-to-point verification and functional system testing Troubleshoot control panels, field devices, and network communication issues Assist with programming changes, graphics updates, and logic adjustments Interpret control diagrams, wiring schematics, and sequences of operation Document commissioning results and maintain accurate service records Support mechanical contractors, engineers, and end users during project execution Respond to service calls and provide customer-facing technical support Ideal Candidate Profile Experience working as a BAS Controls Technician or HVAC Controls Specialist Strong troubleshooting ability with BAS/DDC systems Hands-on experience installing, wiring, and commissioning control components Familiarity with Tridium, Honeywell, Siemens, Alerton, or Distech systems Understanding of HVAC equipment (AHUs, boilers, chillers, VAVs, heat pumps) Clear communication and customer service skills Ability to work independently and as part of a field team How to Apply If you have experience in building automation or HVAC controls and are looking for a stable, growth-focused opportunity in the Providence region, please apply through this posting. Qualified candidates will be contacted for further discussion.

Industrial Communications is an established and diverse wireless communications company providing powerful communications solutions to businesses, public safety, and government agencies throughout New England and South Florida. We have an immediate opening at our Marshfield, MA headquarters for an experienced Manager/Public Safety RF Systems. The essential duties and responsibilities for the Manager/Public Safety RF Systems are as follows: Design, implementation, and troubleshooting of two-way radio systems including infrastructure, subscribers, mobile backhaul Assist with customer presentations and proposals System staging System acceptance testing Radio coverage testing and interference mitigation Complete system documentation System upgrades Management of P25 sales personnel Management of RF systems technicians and network IT personnel Management of administrative support personnel Oversight of public safety network (fiber and microwave) JOB SPECIFICATIONS for the Manager/Public Safety RF Systems(Knowledge, Skill Sets, Experience, etc.) Bachelor's Degree in Engineering or Computer Science preferred 4+ years of experience RF systems engineering Experience/knowledge in radio communication systems, radio propagation, RF, wireless or broadband/LTE is preferred Strong technical acumen and willingness to interface with the customers Experience working with public safety customers Proven end-to-end technical experience in wireless communications (i.e., from mobile device through to core infrastructure) Strong general knowledge of wireless communications fundamentals and voice/data architectures Strong general knowledge of IP networking protocols and security Familiarity with Motorola Solutions' portfolio including ASTRO 25, Avtec, MOTOTRBO, WAVE/Team Communications, etc. a plus Familiarity with public safety radio systems design and operation Excellent verbal and written communications skills and the ability to present complex topics to non-technical audiences Ability to build strong relationships with internal and external stakeholders Self-motivated, excellent problem-solving skills, and a strong attention to detail CERTIFICATIONS CETa certification, FCC license, General Radio Operators License (GROL), APCO Public Safety Radio Technician is a plus. Electronics/Applied Electronics background desired.

Starship Technologies is revolutionizing deliveries with autonomous robots. These robots are designed to deliver food, groceries, and packages across college campuses and neighborhoods in minutes. Starship has now completed millions of autonomous deliveries to date, traveled millions of miles and is currently doing more than 140k road crossings each day. Our contribution to society includes reducing congestion, and pollution, providing zero-emissions deliveries, increasing the quality of life for residents, empowering seniors and disabled people, and enabling affordable delivery for local businesses. We're hitting records on an almost weekly basis. Now is an exciting time to join as we grow rapidly around the world! The environment will be similar to a fast-paced restaurant/workshop while allowing you to plunge into a cutting-edge technological environment working directly with our autonomous robots. Our Robot Technicians will execute robot fleet repair throughout the shift, troubleshoot unexpected situations that may arise, and work effectively to keep our robots in operation. Job Responsibilities: Technical Tasks: * Maintaining the health of our global fleet of robots through daily maintenance and repair tasks. Which can include but is not limited to - diagnosing unforeseen problems, troubleshooting equipment malfunctions, and repairing or replacing faulty equipment (tires, electronics, motors). * Carrying out preventive maintenance activities and upgrades on robots and infrastructure. Monitoring and servicing our internal systems, running tests and completing reports, and completing updates or improvements to existing systems as appropriate. * Perform root cause analysis to identify the causes of faults or problems and systematically develop a solution to prevent/solve underlying issues. Operational Tasks: * Accurately document all tasks/partner or internal messaging related to service concerns or robot-related issues using appropriate applications/tools. * Maintain a clean and organized hub by performing accurate spare parts inventory audits twice a week and ensuring all tools are accounted for and returned to their proper location after use. * Work with our engineering team to identify any potential improvements regarding robot health and design. * Assist our Operational Team and vendors/merchants by providing in-person assistance through performing weekly Merchant Preflights to understand any service-related issues, provide operational and troubleshooting assistance related to Starship-provided devices, and act as a Starship brand representative while interacting with clients. * Occasionally support our Operational Service team by assisting with Robot field rescues or operational services tasks when needed. * Other duties as assigned. Minimum Qualifications: * A passion for robots and innovative technologies. * Currently pursuing a degree in Engineering or another related STEM field. * Previous experience in Technical Support and with any service desk application is beneficial, but not required. * Good knowledge regarding mechanics, electronics, and IT. * Excellent client-facing skills. * Self-starter; takes initiative, can work without supervision and begin projects independently. Experience & Education Requirements: * Knowledge of Unix/Linux systems, CLI tools, and scripting preferred, but not required. * Hobby projects in electronics or mechanics. * Previous experience in managing a large fleet of devices. Physical Requirements: * Movement ability to frequent usage of wrists, hands and finger dexterity to movements such as constant typing, as well full-body exertion while wrangling the robot fleet. * Occasional lifting of items with weight up to 70 lbs. * Comfortable riding an ebike on various terrain. What's in it for you? * Opportunity to work on industry-leading self-driving delivery robot technology on a uniquely large scale, creating history and making things happen * You can immerse yourself in the world of technology and innovation * You will have a chance to work with people with a strong inner burning and motivation. We are self-aware and seek feedback and improvement. We don't want to wait until we are told what needs to be done but take it as a matter of pride to figure out solutions for topics in various teams and areas * You'll have endless opportunities to learn from our inspirational, talented team members across the globe Ready to join our Starship fleet? Apply today! Job Type: Full-time Only candidates who send resumes will be considered. Please include your availability when applying. Early application is encouraged. Check out our website to find out more about us: ************************ Department US Operations Locations Bridgewater, MA Employment type Full-time

Job Description This position is responsible for testing, aligning, troubleshooting, repairing and modifying circuit boards to obtain specified functionality. Test various circuit board chassis to comply with customer specs. Make repairs down to component level on circuit boards. Make adjustments and calibrations to circuit boards. Modifies functions of circuit boards to conform to specific requirements. Sets up standard test apparatus or test equipment and circuitry to conduct functional and operational tests to evaluate performance and reliability of circuit boards. Analyzes and interprets test data. Adjusts, calibrates, aligns, and modifies circuitry, components and records effects on unit performance. Complete paperwork associated with testing and troubleshooting. Fabricated cables for use with test equipment and circuit boards as needed. Qualifications: Must be able to troubleshoot down to component level. Must have strong skills with volt meters, spectrum analyzers, network analyzers, oscilloscopes, power supplies and signal generators. Strong electronics background especially in the Radio Frequency and digital electronics field. Must be able to read electronics schematics. Good deductive reasoning ability for troubleshooting. Demonstrates ability to be mechanically inclined with soldering skills. Must be open minded to perform all tasks needed. Background in radio communication a plus. Ability to use mechanical tools in the fabrication and assembly of chassis. Will be working under microscopes for long periods of time. Must be a US Citizen. Must pass a background check and drug test.

Schedule: Thursday, Friday, Saturday, Sunday, Monday - 6:00am to 2:30pm Pay Range: $34-38/hr, depending on overall skills and experience OVERVIEW OF ROLE: The Electromechanical Technician will be responsible for carrying out assembly, maintenance, and troubleshooting of control systems infrastructure and equipment. They will be responsible for both low-voltage control wiring and higher-voltage power wiring and will work on a variety of internally developed and third-party systems and machines. They will work closely with Controls Engineers and Maintenance Mechanics on the Manufacturing team, as well as both technicians and engineers from a variety of adjacent working groups. for all in-plant automation devices such as Allen Bradley PLC's, HMI's and VFD's.. The Electromechanical Technician will assist in accurate data collection for MES, Kepware and SCADA systems. ESSENTIAL DUTIES AND RESPONSIBILITIES: * Perform maintenance (corrective, preventive, predictive, routine, and troubleshooting) on instrumentation systems and components in a safe, efficient, and compliant manner. * Wire, test, and troubleshoot control panels and individual electrical subcomponents. * Assemble control systems infrastructure and install third-party equipment such as power meters, pumps, pressure sensors and the like. * Read and mark-up electrical schematics. * Assist with maintaining all equipment programs database. * Follow company and industry workmanship standards for assembly and electrical work. * Follow Lock-Out Tag-Out (LOTO) procedures as-needed. * Set up and troubleshoot simple ethernet communications networks. * performing routine and emergency maintenance of the facility's industrial electrical and control systems and equipment. * Recommend component replacement or upgrades when items become obsolete or are at end of life. * Assist in maintaining building SCADA systems to ensure all are functioning as designed. * Continuously improve the reliability of current systems * Ability to effectively communicate with co-workers and take direction from others. * Ability to work in a fast-paced environment, with multiple and changing priorities while maintaining strong attention to detail and a high level of accuracy. * Other job duties as assigned EDUCATION AND/OR EXPERIENCE: * 2 - 4 years of relevant experience * Familiarity with the basic concepts of PLCs, HMIs, SCADA systems, and networking * Familiarity with cGMP/GMP. * Strong understanding of automated manufacturing equipment and programming required. * Knowledge of proper wiring and cabling standards and techniques (Clean termination, ferruling, grounding & bonding, strain relief, etc.) * Proven experience with troubleshooting equipment problems and performing complex system tests required. * Rockwell certification preferred. * Proficient in MS Word, Excel, PowerPoint required. * Experience with databases, process monitoring systems and MES (manufacturing execution system) / information systems. * Valid Massachusetts Driver's License required. * Know the proper use of hand and power tools. * Experience in a food processing & manufacturing environment is a plus. PHYSICAL REQUIREMENTS AND ENVIRONMENT: * Must have good vision and manual dexterity. * Able to sit / stand for prolonged periods at a desk and working on a computer. * Must be able to work in a cold environment and in tight areas. * Able to bend, push, carry, twist, and lift up to 50lbs without difficulty on a continuous basis. * This position requires participation in our mandatory respiratory protection program with respect to some essential tasks. Performance of confined space entry is also required with respect to some tasks which are essential to this job. * Loud Noise * Perform tasks in both cold and hot work environments. * Company provided Personal Protection Equipment (PPE) must be worn while on the production floor Exciting Benefits Await You! * Enjoy top-tier Medical, Dental, Vision coverage. * Pamper your furry friends with Pet Insurance. * Stay fit with our Wellness Plan and Free Gym Access. * Boost your skills with Employee Tuition Reimbursement. * Unlock endless opportunities with College Scholarship for dependents. * Reap the Rewards of Our Bonus Program Available to Our Salary and Hourly Employees. * Receive a Generous 401k Company Match. * Take advantage of Competitive Paid Time Off. * Elevate Your Safety Net with Company-Sponsored Life Insurance Coverage. * Receive Relocation Assistance for a Smooth Transition. * Earn Rewards through our Employee Bonus Referral Program. * Elevate Your Workplace Experience with Community Impact Opportunities. * Celebrate Together with Employee Appreciation BBQs, Happy Hours, Birthdays, & More! Opportunity Calls! Unsure if you meet all requirements? Don't hesitate, apply! Our recruitment process is prompt and transparent. Your resume will receive swift attention from our talent professionals. If chosen, you'll undergo a recruiter phone screen, followed by interviews with key team members. We value your potential. At Home Market Foods, we champion equal opportunities for all, prohibiting discrimination based on race, religion, gender, and more. Our commitment extends across all aspects of employment, ensuring a fair and inclusive workplace. At this time, Home Market Foods will not sponsor applicants for employment authorization for this position for the following work visas: STEM OPT EAD, H-1B, H-1B1, E-3, O-1, J-1, or TN

Milton CAT is the exclusive distributor of Caterpillar earthmoving and construction machinery and power systems products in the Northeast. Headquartered in Milford MA, the Milton CAT team has over 1,000 dedicated and experienced employees working from 12 well-equipped locations in New Hampshire, Massachusetts, Maine, Vermont, Rhode Island, and upstate New York. Milton CAT serves customers in light to heavy construction, forestry, agriculture, governmental, paving, scrap, demolition, and waste markets as well as providing power for the marine, heavy truck and power generation industries. Location: Milford, MA Department: Service Employment Type: Full Time Union Work Hours: 1st Shift Requisition Number: 16-0113 Description Milton CAT is seeking an experienced Earthmoving Field Service Technician. Technicians are responsible for the diagnosis, repair, reconditioning, overhaul and maintenance of customer and company heavy equipment and components. Depending on the location and assignment, the technician will be responsible for some or all of the functions and duties listed below. These repairs may require working hours in addition to the normal work schedule for emergency calls or routine service as required. Flexibility and in-depth product knowledge are necessary for this position. Essential Duties • Removes, disassembles, assembles, and installs components and parts. • Identify the problem and cause of failure through logical troubleshooting steps. • Determines reusability of parts in accordance with published Caterpillar reusability guidelines. • Orders replacement parts ensuring that parts ordered are correct and complete at time of order. • Cleans, repairs, reconditions, and maintains equipment and components. • Tests, measures, and adjusts engine and machine systems and components. • Prepares, inspects and operates machines prior to delivery. • Keeps up to date with developments in tooling, technologies and systems. • Prepares inspection and appraisal reports. • Prepares accurate and complete service reports timely. • Maintain a professional and proper personal appearance at all times adhering to company policy. • Flexible to work after hours when needed to meet customer needs. • Performs related duties as assigned. Qualifications Qualifications To perform this job successfully an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and ability required. • High school diploma or (GED) equivalent. • Three years experience as an earthmoving shop technician working with heavy equipment. • Experience on CAT heavy equipment or similar equipment. • Proficient in mechanical systems (transmissions, engines, hydraulics, etc.). • Ability to diagnose and repair CAT heavy equipment and components in the field. • DOT and MSHA certifications required. • Proficient in the use of a computer and related software (Word, Excel, etc.). • Strong problem solving skills and be detailed oriented with a high level of accuracy. • Ability to operate a service vehicle. • Valid driver's license and a safe driving record. • Able to lift more than 50 pounds. • Able to work varying shifts, weekends and holidays. • Ability to perform duties with a sense of urgency, exceeding customer expectations. • Ability to work in the field without supervision. • Must be able to work in a dynamic, fast paced service environment. • Maintain a tool inventory sufficient to perform assigned tasks. • Must have a safe working record. Preferred Skills and Competencies • Associates degree in a related field is preferred. • CDL License. This job description is not intended to be all-inclusive. Your supervisor may request and assign you similar duties. Apply Online - ************************************************************************** Resumes that are mailed, emailed or hand-delivered to Milton CAT or any employee will not be considered. You must apply online. Background checks, drug testing, and health assessments are required as part of our pre-employment process. Milton CAT is an equal opportunity employer that values the strength diversity brings to the workplace. We encourage applications from individuals with disabilities, minorities, veterans, and women. Applicants receive fair and impartial consideration without regard to race, sex, color, religion, national origin, age, sexual orientation, gender identity, handicap, disability, veteran status, genetic data, or other legally protected status. We base all employment decisions to further this principle of equal employment opportunity. VEVRAA Federal Contractor. EEO/AA employer. Additional Information All your information will be kept confidential according to EEO guidelines.

Role: Slalom Flex (Project Based) - Technical Engineer (Pega) Who You'll Work With Our teams help organizations of all kinds redefine what's possible, give shape to the future - and get there. We focus on high-impact projects, meeting our clients where they are to uncover business needs and deliver results. Our teams go beyond the expected to help clients move confidently through ambiguity and risk and drive more transformative outcomes. The Technical Engineer with strong Pega expertise will focus on designing, building, and optimizing enterprise workflows on the Pega Platform, ensuring high performance, security, and scalability. What You'll Do * Design and Build: Develop case types, flows, UI rules, and data models on Pega Platform (v7.x / v8.x). * Integrations: Implement and troubleshoot integrations (REST, SOAP, APIs, MQ, databases). * Performance & Security: Conduct performance tuning and enforce security/access control best practices. * Collaboration: Work within Agile/Scrum teams, partnering with business analysts, QA, and DevOps. * Consulting Excellence: Translate business requirements into technical solutions and provide clear recommendations to stakeholders. What You'll Bring * Strong expertise in Pega Platform (v7.x / v8.x). * Proven experience as a Technical or Lead Pega Architect on large-scale implementations. * Deep understanding of: * Case Management, Flows, and UI rules * Data modeling and decisioning * Pega performance tuning and optimization * Security and access control * Hands-on experience with integrations (REST, SOAP, APIs, MQ, databases). * Experience with Agile/Scrum methodologies. * Experience with Pega migrations and upgrades. * Pega certifications such as: * Pega Certified Lead System Architect (CLSA) * Pega Certified Senior System Architect (CSSA) * Familiarity with cloud platforms (AWS, Azure, or GCP). * Exposure to DevOps tools and CI/CD pipelines. * Experience in regulated industries (Financial Services, Healthcare, Insurance). * Consulting experience. About Us Slalom is a fiercely human business and technology consulting company that leads with outcomes to bring more value, in all ways, always. From strategy through delivery, our agile teams across 52 offices in 12 countries collaborate with clients to bring powerful customer experiences, innovative ways of working, and new products and services to life. We are trusted by leaders across the Global 1000, many successful enterprise and mid-market companies, and 500+ public sector organizations to improve operations, drive growth, and create value. At Slalom, we believe that together, we can move faster, dream bigger, and build better tomorrows for all. Compensation and Benefits Slalom prides itself on helping team members thrive in their work and life. As a result, Slalom is proud to invest in benefits that include meaningful time off and paid holidays, parental leave, 401(k) with a match, a range of choices for highly subsidized health, dental, & vision coverage, adoption and fertility assistance, and short/long-term disability. We also offer yearly $350 reimbursement account for any well-being-related expenses, as well as discounted home, auto, and pet insurance. Slalom is committed to fair and equitable compensation practices. For this position, the hourly pay range is $65 to $90/HR depending on experience. Actual compensation will depend upon an individual's skills, experience, qualifications, location, and other relevant factors. The hourly pay range is subject to change and may be modified at any time. EEO and Accommodations Slalom is an equal-opportunity employer and is committed to attracting, developing and retaining highly qualified talent who empower our innovative teams through unique perspectives and experiences. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veterans' status, or any other characteristic protected by federal, state, or local laws. Slalom will also consider qualified applications with criminal histories, consistent with legal requirements. Slalom welcomes and encourages applications from individuals with disabilities. Reasonable accommodations are available for candidates during all aspects of the selection process. Please advise the talent acquisition team if you require accommodations during the interview process. We will accept applications on an ongoing basis through January 23, 2026

What you will do Johnson Controls is hiring a Test/Instrumentation Technician based in our Cranston, RI, testing facility. You will work with a variety of instrumentation, automation and data acquisition equipment in support of the company's activities by performing the following duties. Candidates must be commuting distance to the Cranston, RI, facility, or able to relocate. How you will do it Reads and interprets test plans, procedures, and schematics. Operates and maintains instrumentation, automation, and data acquisition equipment. Supports other technicians and engineers through the collection, documentation, and storage of test data and automation of various test set-ups. Fabricates electrical/mechanical test fixtures. Utilizes programs within the LabVIEW programming environment. Exercises troubleshooting skills and determines corrective actions for abnormal conditions for instrumentation and acquisition systems. Performs various housekeeping duties. Daily collaboration with engineers and various technicians What you will do Required Associate's degree in Electrical Engineering Technology or related field, or equivalent experience. Experience with Labview. Demonstrated proficiency in basic math functions, trigonometry and algebra. Demonstrated proficiency with Microsoft Office applications. Able to work in an environment that consists of several lab and machine shop areas. Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

Job Description Island Tech Services is a leading provider of emergency and specialty vehicle upfitting solutions. We work with law enforcement, emergency responders, and various public safety departments to ensure their vehicles are equipped with the latest technology and modifications to perform efficiently in critical situations. Our team is dedicated to providing the highest level of service and craftsmanship in vehicle upfitting, and we are looking for a skilled Upfit Technician to join our team. Position Summary The Upfit Technician is responsible for installing, troubleshooting, and servicing various upfitting components for emergency and specialty vehicles. This includes wiring, lighting, sirens, and other equipment installations necessary for the customization and functionality of vehicles for our clients. The ideal candidate will have experience with automotive electronics and/or vehicle modifications and be committed to maintaining quality and safety standards. Key Responsibilities Perform custom installations of emergency lighting, sirens, radios, partitions, and other vehicle components. Wire and test electronic components to ensure proper function and safety. Diagnose, troubleshoot, and repair equipment and systems as needed. Follow established procedures, safety protocols, and quality standards. Document work performed, including parts used and time spent, in accordance with company and client requirements. Collaborate with other technicians and team members to meet project deadlines. Maintain a clean, organized workspace and care for all tools and equipment. Stay updated with the latest vehicle upfitting technology and best practices. Qualifications High school diploma or GED required; technical or trade school preferred. Previous experience with vehicle upfitting, automotive electronics, or a similar field is strongly preferred. Knowledge of vehicle electrical systems, wiring, and diagnostic procedures. Ability to read and interpret technical manuals, wiring diagrams, and schematics. Strong attention to detail, troubleshooting, and problem-solving skills. Ability to work independently and as part of a team. Valid driver's license and a clean driving record. Why Join Island Tech Services? Competitive pay and benefits package Opportunity to work in a dynamic, fast-growing industry Supportive team environment with ongoing training and development Be part of a company committed to innovation and quality in public safety Job Type: Full-time Payrate: $19-25/hour Benefits: 401(k) Health insurance Life insurance Paid time off Vision insurance Work Location: In person

The Service Technician serves as an ambassador for the Company and is responsible for managing equipment installation and repairs for air compressors, dryers, tanks, and all related compressed air products. Services are performed on-site and on demand, to ensure complete customer satisfaction. Responsibilities * Servicing air compressors, dryers, filters, and related compressed air equipment. * Troubleshoot and evaluate electrical diagrams and machine faults. * Provide technical service, start-ups, installation and repairs of air compressors, dryers, tanks, and all related compressed air products. * Complete written evaluations, recommendations, and related company reports. Ability to work with service software for communication and scheduling. * Positive attitude and desire to grow an existing sales & service business. * Able to care and maintain a company vehicle. * Ensures compliance with health and safety laws, regulations, and best practices. * Performs other duties as assigned. Competencies * Strong Mechanical and problem-solving skills. * Customer service and consultative skills. * Able to work with a team environment. * Strong work ethic with ability to work under minimal supervision. * Excellent verbal and written communication skills, with proven ability to clearly communicate with engineering, technical support, sales, management, and customers. * Thorough understanding of products and equipment used in manufacturing. * Excellent organizational skills and attention to detail. * Excellent time management skills, with proven ability to meet deadlines. * Proficient with Microsoft Office Suite or related software. Position Type/Expected Hours of Work This is a full-time position. Days and hours of work are Monday through Friday. Occasional evening and weekend work may be required as job duties demand. Travel There may be times where overnight travel is required but that will be an exception. Required Education and Experience * Previous field experience working on compressed air equipment is highly desired. * Previous work history of 2 to 3 years with a service-based organization. Required License and Certifications * Must have a valid, unexpired driver's license. * Clean driving record.

Job Code **3944** \# of Openings **10** Apply Now (**************************************************** Requisition?org=GATEWAYVENT&cws=55&rid=3944) GVI, Inc., a subsidiary of Three Saints Bay, LLC and Federal Government Contractor industry leader, is seeking Engineering Technicians to effectively and efficiently support our customer in Newport, RI. **Qualified candidates will be expected to:** + Perform mechanical/electrical repair and troubleshooting + Provide equipment maintenance (routine, preventive, corrective) and repairs and support facilities testing and upkeep **Position requirements:** + US Citizen + Ability to obtain and maintain a minimum of Secret Security Clearance; candidates currently possessing an active Secret clearance are preferred. + High School Diploma or Equivalent. + Familiarity with basic hand tools, basic test equipment + Experience on electrical/mechanical repairs and troubleshooting. _Prior experience with Navy systems desired but not required_ . + Ability read and interpret technical drawings, and diagrams + Familiarity with computer use and ability to create basic reports using MS word + Must have a valid U.S. driver's license. + Ability to frequently lift 50 lbs. + Excellent communication skills (verbal, written), and excellent customer service skill _Strong preference will be given to those candidates with experience with the navy Towed Array Handling Systems_ **Position located in: Newport, RI** **Apply at:** ***************************************************** Requisition?org=GATEWAYVENT&cws=42&rid=3944** VEVRAA Federal Contractor Three Saints Bay, LLC and its subsidiaries offer a team-oriented working environment and the opportunity to work with exceptional, dedicated industry professionals. We offer our employees a comprehensive benefits package and the opportunity to take part in exciting projects with government and commercial clients, both domestic and international. We are an Equal Opportunity Employer. We invite resumes from all interested parties without regard to race, color, sex, sexual preference, religion, creed, national origin, age, genetic information, marital or veteran status, disability, or any other category protected by federal, state, or local law.

The Engineering Technician in the EMC (electromagnetic compatibility) lab provides technical support to engineers in the areas of product testing, data collection, and product and/or process development. Particular to working in the Lab environment, the Engineering Technician also interfaces with internal customers, evaluates test specifications, maintains test equipment, and contributes to schedule creation. - # General Responsibilities + Leads analyzing the malfunctions and deviations of control systems to identify and resolve problems. + Advises the engineering team on sample builds + Ensures tooling and equipment validation with engineering. + Performs engineering tests. + Ensures the developtment of testing and data analysis. + Leads cycle time studies that identifies potential bottlenecks. + Identifies irregularities in the process of the manufacturing equipment. + Advises on analysis and prepares reports using metrics obtained from monitoring using raw data, trends and other reports. + Leads technical issues and trains other employees in the team. + Provides changes of documentation in work instructions. # Experience / Qualifications + Relevant work experience or knowledge of the role + Must be a team player able to work in a fast-paced environment with demonstrated ability to handle multiple competing tasks and demands + Strong organization, planning and time management skills to achieve results + Holds self-accountable to achieving goals and standards + Proficient in Microsoft Office programs (Outlook, Word, PowerPoint, and Excel) + Soldering skills (through-hole and surface mount) expected. + Ability to lift 50lbs (large test items/heavier electronic equipment) expected. + Existing familiarity with Electromagnetic Compatibility (EMC) standards and test methods is a plus. + Supports Center of Excellence (COE) initiatives by collaborating with global teams to standardize best practices and drive process improvements across multiple projects. + Assists in the development and implementation of new testing protocols and procedures in alignment with COE objectives. + Participates in troubleshooting complex technical issues and shares learnings with COE members to promote knowledge transfer. + Maintains detailed records and documentation to facilitate continuous improvement and compliance with COE standards. + Engages in ongoing training and skill development to stay current with emerging technologies and methodologies relevant to the COE's focus areas. \#LI-KK2 #LI-Onsite # Hourly Base Pay Range: $33.60 - $46.20 _At Sensata, our employees are the key to our success and growth. We recognize that each individual brings their own unique experience, therefore the base salary range information shown above is a general guideline only. Sensata considers several factors when extending an offer, including, but not limited to, a candidate's experience and qualifications, as well as internal equity, market and business considerations. In addition to base salary, Sensata offers competitive medical, dental, vision, life and disability insurance plans, along with education reimbursement, wellness programs, a 401(k) retirement plan with Company matching, and a variety of paid time off, such as vacation or flex-time, sick, bereavement, and parental leave._ # Smarter _Together_ + Collaborating at Sensata means working with some of the world's most talented people in an **enriching environment** that is constantly pushing towards the next best thing + Employees work across functions, countries and cultures gaining **new perspectives** through mutual respect and open communication + As OneSensata, we are working together to make things work together Click here to view Sensata Recruitment Privacy Statement (*********************************************************** Click here to view our Sensata Recruitment Privacy Statement for China (*********************************************************************************************** **NOTE: If you are a current Sensata employee (or one of our Affiliates), please** **back out of this application** **and log into Workday via the Company Intranet to apply directly. Type "FIND JOBS" in the Workday search bar.** Return to Sensata.com **Read our Fraud Advisory (https:** //************************ # Sensing is what we do. In fact, our name Sensata comes from the Latin word sensate for 'those gifted with sense'. Our focus on sensing is also reflected in our logo, which spells Sensata in Braille. Sensata Technologies is a global industrial technology company striving to create a safer, cleaner, more efficient and electrified world. Through its broad portfolio of mission-critical sensors, electrical protection components and sensor-rich solutions, Sensata helps its customers address increasingly complex engineering and operating performance requirements. With more than 19,000 employees and global operations in 15 countries, Sensata serves customers in the automotive, heavy vehicle & off-road, industrial, and aerospace markets. Learn more at **sensata.com** and follow Sensata on LinkedIn (******************************************************* , Facebook (********************************************* , **Instagram (************************************************* and X (**************************** . # Note to applicants for positions in the United States: + Sensata Technologies, Inc. (US) is proud to be an Equal Opportunity and Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran or any other basis protected by federal, state or local law. + View The EEO is the Law poster (*************************************************************** and its supplement (*************************************************************** . + Sensata Technologies, Inc. (US) participates in E-Verify. View the E-Verify posters (******************************************************************************************** If you are an individual who requires a reasonable accommodation in connection with the hiring process and/or to perform the essential functions of the position for which you applied, please make a request to the recruiter or contact accommodations@sensata.com # Diversity Statement We are dedicated to ensuring our employees feel a sense of belonging (********************************************************************************* and respect every day. We believe that every individual has unique insights that others can learn from. Working at Sensata means you can bring your whole self to the table. Our goal is to achieve fair representation of women, minorities, veterans, people with disabilities, and all types of diversity among all levels in our organization. Note to applicants for positions in the United States: Sensata Technologies, Inc. (US) is proud to be an Equal Opportunity and Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender identity, sexual orientation, age, national origin, protected veteran status, disability or any other basis protected by federal, state or local law. View The EEO is the Law poster ************************************************************** and its supplement ************************************************************** Sensata Technologies, Inc. (US) participates in E-Verify. View the E-Verify posters *******************************************************************************************

Job Description Kitchen Equipment Technician Joe Warren & Sons Company Inc., (JWS) a leading provider of commercial refrigeration and food equipment services and sales throughout New England, seeks to add a Commercial Cooking Equipment Field Service Technician to help lead the company through an exciting phase of growth. Established in 1991, JWS is a family owned-operated business and headquartered in Norwood, MA. JWS has a long history of above-market growth driven by strong customer loyalty, a dedicated and thoughtful management team, and an industry leading reputation for quality service. Kitchen Equipment Technician Responsibilities Properly maintain, service and install commercial cooking/food prep equipment. Accurately and timely completes assignments for all services performed. Consults with the Parts Department to accurately identify recommended parts. Maintains a neat and orderly truck, along with accurate part and tool inventory. Communicates with manufacturers as needed to help with diagnosing problems with equipment. Defines equipment problems, collects data, establishes fact and draws valid conclusions about the work needing to be performed. Provides highest level of service to the customer and professionally communicates the service needed to customers. Promotes and recommends other services provided by JWS to customers. Kitchen Equipment Technician Qualifications High School diploma or GED and valid driver's license. Can work well independently or as part of a cohesive team. Show passion and empathy towards our customers and team. Must be able to use hands for fine manipulation of hand tools. Highly safety conscious and must be able to climb stairs and ladders. Able to follow through on duties and assignments with minimal supervision. Background experience in gas, electric, plumbing, and/or steam. (5) years of experience in commercial equipment repair, or in a related area. Excellent organizational skills, must be motivated and a self-starter with a team-first attitude. Physical Requirements: Ability to frequently kneel, bend, squat, push, pull, reach, and occasionally. lift/carry up to 70 lbs. Ability to work on ladders, roofs, and other high places. Ability to work with moving mechanical parts, pressurized steam equipment, open flames, heated surfaces, liquids, and risk of electrical shock in damp, humid, or freezing conditions. Kitchen Equipment Technician Benefits: Attractive compensation package with periodic reviews, bonuses, and increments Very competitive 401k with a 4% Safe Harbor Match Comprehensive Health Benefits: Medical, Dental (FREE), Vision, and HSA Ready-to-Go Company Vehicles: Equipped with all necessary tools and equipment. Flexible On-call with Overtime: Infrequent on-call schedules and plentiful OT opportunities with incentive pay. Career Growth: Paid training, tuition assistance, and numerous advancement opportunities. Mentoring Incentives: Earn extra by mentoring through our Experienced Training Program. Life & Disability Insurance for your peace of mind Benefit from our company-wide Bonus incentive program with quarterly payouts Enjoy 9 company-funded holidays along with generous PTO Robust career progression opportunities Referral bonuses for expanding the JWS family Vast training and professional development prospects Compensation: $60,000-100,000+ At this time, we are not seeking agency assistance or third-party recruitment services. We are currently unable to sponsor work visas for this position. Applicants must be authorized to work in U.S. without sponsorship. Joe Warren & Sons Co. Inc. champions diversity and inclusivity. We provide equal employment opportunities to all, irrespective of age, color, disability, ethnicity, family status, gender, national origin, race, religion, sexual orientation, veteran status, or any other protected classification. Embrace a diverse, inclusive work environment with us. Powered by JazzHR O7S8U72KSX