Electronics technician jobs in Woodridge, IL - 815 jobs

Safely maintain, repair and rehab equipment in multiple areas within the Maintenance Division; Plumbing, Kitchen Equipment Repair, HVAC/R, Aquatic Systems & Water Quality. Responsibilities: Perform daily, weekly and monthly inspections of assigned equipment and locations Perform rehab work on assigned equipment and locations Maintain, install, repair and trouble-shoot various items, equipment and locations Inspect equipment and locations for malfunctions and repair Perform routine preventative maintenance on various pieces of equipment Assist with keeping a daily duty log of maintenance work performed as well as accurate records of preventative maintenance Effectively and professionally communicate and coordinate with other departments within the park. Comply with company procedures, policies and safety standards Help to ensure compliance with government codes and corporate mandates. All other duties as assigned. Qualifications: Knowledge of Plumbing, HVAC/R, Aquatic Systems and Water Quality Should possess practical skills and willingness to learn in all of the respective areas; Plumbing, HVAC/R, Aquatic Systems, and Water Quality Experience with electrical, plumbing & natural gas systems preferred Ability and willingness to work any shift and on weekends and holidays as needed Must be able to trouble-shoot clearly, calmly and safely in the presence of Guests and fellow Team Members Must possess strong safety sensitivity & ability to work with many different types of devices High School Diploma or equivalent Must possess a valid Driver's License

Working under general supervision and instruction, performs a variety of moderately difficult assignments requiring judgment to resolve. ESSENTIAL DUTIES AND RESPONSIBILITIES ● Applies substantial understanding of the job, knowledge and skill to complete a wide range of tasks. Receives little work instruction on daily work and general instructions on newly introduced assignments. ● Troubleshoot to determine problems in non-functioning electro-mechanical equipment used in the manufacturing process. ● Dismantle, adjusts, repairs and assembles equipment according to layout plans, blueprints, operating or repair manual, rough sketches or drawings/schematics. ● Uses test and diagnostic equipment to perform checkouts. ● Rebuilds manufacturing equipment as required. ● Perform scheduled preventive maintenance. Document maintenance as per program designation. ● Calibrate equipment using general and special purpose test equipment. ● Communicates with equipment suppliers regarding the repair of equipment. ● Maintain sufficient data to develop process improvement initiatives. ● May assist in the development of work procedures. ● May be required to source and purchase equipment parts. ● May maintain and store backup information for all critical production equipment software systems. ● May make recommendations regarding new or replacement equipment. ● May train employees in operation of machinery. ● May be required to work overtime or be on-call. ● Comply and follow all procedures within the company security policy. ● May perform other duties and responsibilities as assigned. JOB QUALIFICATIONS KNOWLEDGE REQUIREMENTS ● Knowledge of company policies and procedures to complete assigned tasks. ● Must be able to read, write and communicate in English. Must be able to effectively communicate with technical support services. ● Broad knowledge and troubleshooting capability with various electro-mechanical equipment in a manufacturing environment typically gained through extensive experience. ● Use of basic and special purpose hand tools, leveling instruments, and test/calibration equipment. ● Must be able to troubleshoot all failures that are detectable at the IO level. ● Basic mathematics. ● May require forklift certification. ● Understanding of electronic color codes and other component value markings. ● Understanding of safety practices requirements. ● Solid knowledge of specialized maintenance tracking programs. ● Personal computer operation in a Windows environment (Excel, Word and PowerPoint and e-mail). ● Use of specialized maintenance tracking programs. EDUCATION & EXPERIENCE REQUIREMENTS ● Associates degree in electronics with emphasis in servo positioning theory or equivalent discipline. ● Five (5) to eight (8) years prior work experience in electro-mechanical equipment in a manufacturing environment required. ● Or an equivalent combination of education, training or experience. To comply with the new Illinois AI law, the following text will automatically be added to both internal and external Illinois job postings upon posting the job requisition: Jabil may use artificial intelligence ("AI") in connection with various aspects of its recruitment and hiring functions. If and when AI is used, Jabil ensures that its use of AI would not have the effect of subjecting employees to discrimination on the basis of protected classes.

Electronic Technician will be responsible for assembling and testing the hardware solution/products, operate the test equipment, design PCB layout for future or refinement products and support general engineering effort and operation in the company. Read on to find out what you will need to succeed in this position, including skills, qualifications, and experience. This is a full time position with health benefit and paid holiday. xevrcyc Benefit will be available once new hire completed the probation period.

**_Fast-moving hands-on company where every individual can have an impact_** Loma Systems is a premier manufacturer of inspection equipment used to identify contaminants and product defects in the food and pharmaceutical industries. Established in the UK in the 1960's, Loma Systems is today one of the leading global companies involved in production line safety systems, boasting an impressive installed base of over 125,000 machines in over 100 countries. Our talented team of people work across the world in a friendly, supportive work environment and with a no politics culture, there is nothing to stop you reaching your full potential. We are part of Illinois Tool Works (ITW), a global Fortune 250 diversified industrial manufacturer of value added consumables and speciality equipment with related service businesses. Operating under the core philosophies of 80/20 business processes, customer-back innovation and a decentralized entrepreneurial culture, the company focuses on solid growth, improving profitability and strong returns across its worldwide platforms and divisions. These divisions serve customers and markets around the globe, with significant presence in developed and emerging markets. ITW's revenues totalled US$14.5 billion in 2021, with nearly 43,000 employees worldwide. **Field Service Engineer** **Location: Remote/Travelling - Based in Dallas-Fort Worth Area and within an hour of the DFW Airport preferred. Will consider based in Houston within an hour or IAH. This person will be responsible for servicing customers across the U.S. but primarily in TX, OK, NM, LA, MS. We do not offer relocation assistance for this role.** The Field Service Engineer (FSE) services our Metal Detection, X-Ray and Checkweighing products at Loma's customer sites throughout the U.S. (primarily Wisconsin, Minnesota, North and South Dakota, and Illinois). The FSE does so in a manner consistent with Loma Systems policies and procedures while delivering exceptional customer service and promoting Loma Systems as the best in class operator. **Responsibilities:** + Travel and deliver efficient field support to our customers in the food and pharmaceutical industries. + Verify that machines are operating at peak efficiency by proper calibration and testing. + Commission and test machines using certified test procedures, perform preventative maintenance and emergency service at customer sites. + Accurately document and report all service related activities. These include, but are not limited to submitting Electronic Service Reports, Calibration Reports and Expense Reports at appropriate intervals per company established procedures. + Promote sales of additional Loma product offerings such as service contracts, new equipment leads, spare parts kits, etc. + Provide timely feedback on equipment reliability and design. + Maintain a satisfactory parts inventory and requisition additional parts required to perform normal FSE duties. + Maintain all company property, including laptop, cell phone, safety equipment and tools in good working condition. + Exercise safe working practices and procedures at all times. + Conduct on-site training with customer's personnel to ensure proper operation of equipment. + Hold meetings with customers, including scope and exit meetings. + Participate in the rotation of weekend on-call duties and after-hours phone support. + At Loma's team environment, frequently communicate between the field and the internal office support staff on technical related issues. + Attend refresher training classes and FSE meetings with other service team members to promote continuous improvement of technical and non-technical skillsets. + In addition to the duties listed above, the position holder must carry out tasks assigned by their supervisor that are essentially related to their duties. **Requirements:** + High school diploma required. Associates degree from a technical school preferred. + Minimum 3 years of previous experience in a technical capacity or 4 years of military experience required. Field travel experience preferred. + Knowledge of and experience in diagnosing, troubleshooting, and repairing electro-mechanical equipment and ability to identify root-cause. + Take pride in being organized with regards to completion of paperwork, expense reports, etc. + Must be self-motivated with an inner drive to exceed expectations. + Ability to read, comprehend and interpret complex technical information involving mechanics and electronics. This includes interpretation of schematics and electrical diagrams. + Professional communication with an ability to resolve customer issues and defuse conflict. + Must be capable of a desire to learn a diverse set of products and continually improving product knowledge + Strong ability to use electronic test equipment such as Multi-meters. + Ability to accept changes in a fast paced and changing environment; enjoy taking a hands-on approach in solving problems. + Work independently with little supervision while managing difficult and high-pressure customer situations. + Proficient with office software applications required. + Ability to work overtime and weekends. **Physical & Environmental Requirements:** + Must have a valid driver's license and a good driving record. + Must be able to travel extensively (80% or more approximately) as required to service our customers. + Must be able to work within tight spaces and environments that may be noisy, odorous, dusty, cold and hot on a regular basis. + Must be able to lift and/or move up to 60 lbs. regularly. + Must be able to stand for long periods of time as well as walk, twist, bend, kneel, crawl, crouch, reach, climb and work in awkward positions on a regular basis. **Benefits:** Along with opportunities for career growth and development, Loma Systems provides a comprehensive benefits package, in conjunction with ITW, which supports our employees' educational endeavours, wellness and financial security. Here are some of the features our comprehensive package has to offer: + Medical, dental and vision benefits + 401(k) retirement savings program + Paid vacation days, sick days and holidays + Wellness and fitness program + Company Leased Vehicle + Life insurance up to 8x the salary + Advancement opportunities + Educational assistance + Volunteer and matching charitable gifts programs + Employee assistance program + Free entry and discounts to the Chicagoland area museums, zoos, botanic garden, symphony orchestra, lyric opera and popular nationwide theme parks and entertainment attractions + Employee discounts with the ITW key suppliers: cars, computers, appliances and more **Compensation Information:** The pay range for this role is $28-36/hr _ITW is an equal opportunity employer. We value our colleagues' unique perspectives, experiences and ideas and create workplaces where everyone can develop their careers and perform to their full potential._ _As an equal employment opportunity employer, ITW is committed to equal employment opportunity and fair treatment for employees, beginning with the hiring process and continuing through all aspects of the employment relationship._ _All qualified applicants will receive consideration for employment without regard to race, color, sex, gender identity, sexual orientation, religion, national origin, age, disability, protected Veteran status or any other characteristic protected by applicable federal, state, or local laws._

This role would be for a 3rd shift Electrical Technician and plays a key part in supporting operations through expert troubleshooting, repair, and installation of electrical systems and automated equipment and ensuring the reliability and performance of production systems, working closely with management and maintenance teams. Key Responsibilities: • Troubleshoot and repair electro-mechanical systems with minimal supervision • Support installation and startup of new equipment • Perform preventive maintenance on automated material handling systems • Work with Allen Bradley PLCs, VFDs, HMIs, and 480V electrical systems • Interpret technical documents including blueprints, schematics, and manuals • Collaborate with cross-functional teams to ensure equipment uptime and safety • Follow all safety protocols including Lockout/Tagout, and GMP's Qualifications: • High School Diploma or GED required • 8+ years of industrial electrical experience • 3+ years of PLC programming experience (RSLogix 500, Studio 5000) • Proficient with FactoryTalk View Studio, VFDs, HMIs, analog sensors, and 480V systems • Strong skills in electrical control wiring and panel assembly • Strong communication skills and ability to work independently and collaboratively • Willingness to work overtime and flexible hours as needed Salary Range: $30hr-$40hr Benefits: Bonus Offered Health, dental, and vision, life, short/long term disability insurance 401(k) offering Paid sick leave where applicable by state law (40 hours). LHH is a leader in permanent recruitment-and in the placement of top talent. Our areas of specialty include office administration, customer service, human resources, engineering, and supply chain and logistics. Please feel to check us out and apply for other opportunities if this role isn't a perfect match. Equal Opportunity Employer/Veterans/Disabled To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit *************************************

About the Company HSG Tech Inc. is an American Subsidiary of HSG Laser who is a fast-growing supplier in the global metal forming solution industry. We believe intelligent manufacturing changes future. Customers in 100+ countries have used and recognized our equipment and service. Please visit the web site for details about HSG: **************** About the Role The Service Engineer position is the primary point of contact responsible for training, installation and maintenance of all HSG tech machinery in our Chicago showcase space and equipment purchased by HSG Tech customers in the US region. Reporting directly to the Service Manager in the US, this position will manage technical issues, maintain customer satisfaction, provide monthly maintenance support, promote value add-on services and provide training support. Business travel will be a requirement for this position. Responsibilities Provide key objective management (proper machinery installation, proper accessory management and proper understanding of service data) Optimize work order organization, safe tool use and customer data reporting. Demonstrate understanding of expense reimbursement documentation and customer service evaluations Partner with internal Sales, Marketing, Finance, Customer Service and R&D teams to support stakeholder objectives On-time completion of equipment installation, commission and maintenance tasks while following the company's strict safety and quality guidelines Analyze and find root cause of maintenance impediments, debug system errors and propose system improvements. Participate and prepare company held trainings regarding technical process, company regulation and technician job duties. Conduct customer visits monthly for routine service maintenance while promoting related value add-on services. Provide one-to-one training and guidance for new hired service team members. Qualifications Two years of working experience in related industry (Fiber Laser experience highly preferred) Technical know-how: installation, debugging and maintenance on 6KW equipment Comprehension of circuit diagrams Familiar with CAD or SOLIDWORKS design software Familiar with mechanical principles Detail & deadline-oriented; well organized Excellent verbal and written communication skills Good interpersonal skills; ability to interact with staff across matrix partners Electrician's certification Fitter's certification Job level and pay is dependent on experience. Pay ranges and level progressions: Service Technician ($29-35 hourly) Service Engineer ($36-41 hourly) Senior Service Engineer ($42-48 hourly) HSG is committed to ensuring equal employment opportunities to all qualified persons without regard to race (including associated hairstyles), color, religion, sex, gender identity, sexual orientation, national origin, ancestry, citizenship status, age, marital status, genetic information, military status, unfavorable discharge from military service, order of protection status, pregnancy, arrest record, disability, or any other status protected by applicable law. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. HSG participates in E-Verify and conducts pre-employment drug testing and background checks as part of our hiring process.

Controls Technician - Chicago Heights, IL Pay: $38 - $40/hr Shift: 1st Shift | Monday - Friday | 8a-5p We're looking for a skilled Controls Technician to support, maintain, and improve all plant electrical and control systems-including electrical, pneumatic, hydraulic, mechanical, and network subsystems. In this role, you'll act as a technical subject-matter expert, providing troubleshooting support, leading root-cause analysis, training maintenance techs across all shifts, and ensuring smooth operation of all production and facility systems. You'll work closely with the Maintenance Supervisor, Planner, and Manager to keep production on track, equipment running safely, and documentation up to date. What You'll Do Core Responsibilities Inspect, troubleshoot, repair, and maintain food processing and packaging equipment. Perform corrective, preventive, and scheduled maintenance on a wide variety of automated equipment. Diagnose and repair mechanical, electrical, pneumatic, hydraulic, and control-system issues. Install, program, and troubleshoot PLCs, HMIs, servo drives, VFDs, and related systems. Support and coordinate mechanical technicians during breakdowns and major repairs. Maintain accurate documentation on all controls systems-including hardware, software, and changes. Work safely using proper PPE and adhere to all HACCP, Allergen, Food Defense, and GMP policies. Perform inspections and repairs while equipment is operating on a live production schedule. Lead troubleshooting efforts during downtime and expedite equipment recovery. Maintain secondary plant systems (steam, chilled water, pneumatics, HVAC, electrical distribution, refrigeration, etc.). Write and update job procedures and frequencies within the CMMS (SAP). Train technicians on PLC/VFD/HMI troubleshooting using laptops and plant software tools. Occasionally travel for training, equipment work, or parts procurement. Keep the work area clean and report any potential contamination or unsafe conditions immediately. Key Technical Skills Skilled electrical troubleshooting (120V-480V). Strong understanding of PLC programming (RSLogix, FactoryTalk View, ladder logic). Experience with servo systems, VFDs, motor controls, HMIs, pneumatics, and hydraulics. Ability to read and interpret P&IDs, electrical single-line diagrams, loop drawings, termination diagrams, and mechanical layouts. Experience maintaining batching or continuous process systems and their networks. Ability to perform mechanical, plumbing, and instrumentation work at a semi-skilled level. Qualifications Previous experience as a Controls Technician, Automation Technician, or similar role in manufacturing (food industry experience preferred). Strong troubleshooting aptitude-electrical, mechanical, and automation. Ability to work in a fast-paced production environment under pressure. Excellent communication skills and teamwork mindset. Regular, predictable attendance. CMMS experience (SAP preferred): Create work order notifications Enter labor time Provide feedback for procedure updates Write job-specific procedures and task frequencies Apply now for immediate consideration for this Controls Tech position in Chicago Heights, IL . We Look forward to connecting with you!

The ideal candidate will have a wide range of responsibilities including maintenance, repair, and calibration of field equipment. The successful candidate will be a problem solver who is responsive to customers' needs. Responsibilities Install, service, and repair electromechanical equipment at customer sites, manufacturing facilities, and sales offices Utilizes hand tools and test equipment, such as multimeters, to perform work Effectively communicates technical issues and findings with the Engineering Department Performs in house phone troubleshooting support to customers May be required to provide after-hours phone troubleshooting support Will be asked to travel extensively, nationwide REQUIRED QUALIFICATIONS: Experience with industrial and commercial electrical systems Knowledge or experience of industrial mechanical systems preferred, but not necessary Expert knowledge of supplied machinery (company provides extensive training) Requires travel up to 100% of the time, inclusive of consecutive overnights, between 10-14 days

We are developing computer vision technology which performs in-situ monitoring for industrial 3D printing (additive manufacturing, AM). This technology dramatically changes the metal AM industry by providing immediate component certification and early cancellation of defective builds. Our vision is to provide the additive manufacturing industry with a trusted method to validate part quality in real time. The Phase3D headquarters is in Chicago, located 5 miles from the Chicago Loop. We work closely with federal scientists and engineers to develop machine vision technology for additive manufacturing (camera and software based). We have established research partnerships with multiple national laboratories, US departments, NASA, and research institutions. About Phase3D Culture Phase3D is currently a small team, comprised of independent thinkers, working to solve challenges in software development, data analysis, mechatronics, electrical engineering, and computer engineering. We are a cross-disciplined group and are excited to be pioneers in the rapidly evolving field of artificial intelligence and machine learning for 3D printing. This is a fast-paced, startup work environment, but with the resources and facilities of a US national Laboratory. This means a lot of variability of workflow and responsibilities, with an emphasis on creative problem solving. You will have the chance to be a part of a team making headlines in the 3D printing world. About the Role: We are looking for a candidate with a well-rounded set of skills to support Phase3D's product deployment, customer sales, and product development. This role will incorporate a mix of fast paced engineering, sales, and operations work, including process development, data analysis, and travel to 3D printing sites such as NASA, the US Air Force, DOE national labs. This role will manage strategic customers and work on projects to mature the readiness level of Phase3D's products. About the Role We are looking for a well-rounded, hands-on candidate to support the production and deployment of Phase3D's in-situ monitoring systems for additive manufacturing. This role combines production, field service, and operations work. Perfect for someone who enjoys building hardware, traveling to customer sites, and seeing the direct impact of their work in the field. The Engineering Technician will assemble, pack, ship, test, and help install Phase3D products. You will be responsible for the physical build and validation of electrical assemblies, assisting with internal product testing, managing inventory, and documenting the processes that keep production and installations efficient and repeatable. This position provides the opportunity to work side-by-side with engineers, contribute directly to the company's growth, and represent Phase3D during customer installations and training sessions across the country. Responsibilities Production and Assembly (30%) · Build, pack, ship, and test production electrical assemblies · Cut, strip, solder, crimp, and assemble wiring harnesses and components · Use standard hand and power tools to complete builds safely and efficiently · Perform internal testing of systems and subassemblies before shipment · Maintain production quality through documentation and process feedback Field Service and Installation (50% Enforced) · Travel to customer sites for system installation, setup, and training · Perform hands-on troubleshooting, calibration, and integration with customer hardware · Communicate directly with customers to ensure smooth deployment and operation · Support the engineering team by identifying field issues and recommending improvements Operations Support (20%) · Assist in inventory management, including part tracking and material readiness · Create and update work instructions, installation guides, and process documentation · Collaborate cross-functionally with engineering, manufacturing, and quality teams · Support lean and continuous improvement initiatives within operations Minimum Education / Certification Requirements · Must be U.S. Citizen · High school diploma or equivalent required; technical certificate or associate degree preferred · Engineering mindset, willing to learn new disciplines · Ability to read wiring diagrams, schematics, and technical documentation · Strong troubleshooting and logical problem-solving skills · Excellent communication and organizational abilities · Willingness and ability to travel domestically up to 50% of the time Desired Job Requirements · 2-4 years of experience in production, electrical assembly, or field service roles · Experience assembling or testing electromechanical systems · Familiarity with manufacturing environments and basic inventory control · Exposure to lean production principles or continuous improvement initiatives · Ability to work independently while coordinating with remote teams · Comfortable with variability in tasks and changing project priorities · Enthusiastic about working in a fast-paced startup environment with a small, motivated team Work Location Hybrid and flexible options are available, but the role requires presence in Chicago, IL for production work and team collaboration. Travel to customer sites across the U.S. will be required. Benefits · Competitive Salary: $60,000 - $80,000 depending on experience · PTO program · Mentorship and professional growth opportunities · Healthcare coverage premium First Six Months: Within the first six months, the candidate will be onboarded, become AM metals customer segment literate, and exercise mastery over the commercial value-add and technical specifications of the products. These goals can be accomplished via 3 main stages. Month 1 · Understand Phase3D core technologies, technology roadmap, and business strategy o Complete one calibration of the Fringe system at a development partner's laboratory o Install updated metal fixtures in at least 1 partner site o Supervise two biweekly tests, supporting developers in troubleshooting tasks · Socialize with the cross-functional team, understanding each person's area of expertise and skills spanning the hardware, software, and product installation activities o Take the initiative to schedule a 15 minute meeting with each member of the Phase3D team, including our digital fringe projection expert and our company coach · Understand how Phase3D monitoring provides value to research, additive equipment manufacturers, and contract manufacturers o Schedule a meeting with Sales to receive a full presentation as if you were a customer · Get hands on with the technology, learn how to install and calibrate the system, learn how heightmap readings predict and identify build defects o Create a report for a chosen build, identifying interesting defect areas and reporting on them. Months 2-3 · Taking initiative to fill gaps in operations that you identify o Lead all biweekly test coordination, successfully run 4 biweekly tests and write reports on the results for the slack channel · Planning trips and leading system installations at customer facilities o Lead the trip planning process for at least 1 installation · Build sensor packages and assemble systems with minimal supervision o Make 4 trigger cables and maintain stock of 4 trigger cables o Build and maintain stock of 4 Fringe kits · Provide customer feedback to the team for continuous product improvement. o Make a report on identified areas of weakness in our team/workflow, with suggested improvements. Take charge on implementation Months 3-6 · Contribute to Phase3D' growth through consistently delivering outstanding products and innovations. o Take charge of 3 strategic initiatives within the company, either from the existing list or create your own based on identified gaps in operations.

ICT (In-Circuit Test) Test Technician (1st shift) Nidec Mobility America Corporation(NMOA) has an immediate opportunity for an energetic and focused ICT Test Technician within our St. Charles, IL location. 1st shift (6a- 2:30p) with Overtime Available Saturdays (and possible some Sundays). A little about Nidec Mobility.. We are the North America headquarters for Nidec Mobility America (locations in Illinois, Michigan, Ohio, Canada, Mexico) and a leading Automotive Electronics Designer and manufacturer of sophisticated electronic sensing and control technology / components. We control the most discrete functions within an automobile, including: power system components, complex user interfaces, seat and power window switches, and instrument panel controls, electronic sensing/radar). Objective Under the general direction of the Mfg. Process Engineering Group Manager ensures that ICT failures are analyzed, root cause of the failure is identified and corrective action is implemented. Essential Responsibilities REQUIRES 5+ Years direct experience with AGILENT/KEYSIGHT 3070 in-circuit test experience to.. Perform visual inspection and electrical testing of all ICT failures. Identifies the root cause of the failure based on ICT output file and multi-meter/bridge readings. Identify soldering issues with the ICT failed boards based on knowledge of IPC-610 Nidec Mobility Quality Standards. Fixes the issues identified or instruct inspectors on how to fix the issue. Records the failure reason in the ICT test database. Setup ICT machine to run failed boards. Analyzes ICT first-pass yield and final yield using automated reports from ICT database and recommends corrective action to ICT technicians. Generate excel reports on a weekly basis about overall ICT rework work-in-process level. Maintain clean and organized work area at all times. Completes daily area clean up at the end of shift May participate in cross-training activities with other related positions Support / Participate in the Company's management and quality system including continuous improvement efforts Notify supervisors, group leaders or technicians of any problems or nonconforming product Support/Implement the Environmental policy as it pertains to work activities Perform other duties as required or assigned which are reasonably within the scope of the activities enumerated above Experience: 5+ Years direct experience with Agilent/Keysight 3070 in-circuit test experience Education: Associate's or 2 Year Degree Knowledge/Skills/Abilities: 5+ Years experience in an analysis/inspection role in electronics manufacturing Working Knowledge of troubleshooting electronic circuits Working knowledge of using Microsoft Windows and Microsoft Excel 3+ Years' experience in Solder inspection/repair Working knowledge of reading circuit diagrams NOTE: This position Is Not open to external sourcing (Recruiting agencies)

RELOCATION ASSISTANCE: No relocation assistance available CLEARANCE TYPE: SecretTRAVEL: NoDescriptionAt Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work - and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history. Northrop Grumman Mission Systems is looking for you to join our team as an Electronic Technician 2 based out of Rolling Meadows, IL. The selected candidate will perform routine technical functions supporting development engineering activities, including design, test, checkout, fabrication, modification, and assembly of electronics and electro-mechanical systems, experimental design circuitry, prototype models, or specialized test equipment. This role involves hands-on work with analog, digital, and video-type circuits and logic systems, and requires the ability to work from schematics, diagrams, written and verbal instructions, layouts, or defined plans. What You'll get to Do: Operate specialized test stations and equipment, with a focus on RF applications and TWT (Traveling Wave Tube) tuning. Conduct operational tests and fault isolation on development systems and equipment. Ensure conformance with design specifications. Diagnose and isolate malfunctions down to the component level. Conduct defined engineering tests and collect assigned data. Work in assigned areas such as development, engineering, or test equipment design (excluding production test activities). Multitask effectively and demonstrate initiative as a self-starter. Must be able to lift up to 30 lbs. Must be available to work OT and possibly weekends ******Note: This role is a 2nd shift role, with a 10% shift differential****** Basic Qualifications Electronic Technician 2: High school diploma and 2 years of related experience. Experience with environmental stress screening of electronic hardware (vibration, thermal). Experience utilizing diagnostic equipment, including oscilloscopes and signal generators. The ability to obtain and maintain a security clearance. U.S. Citizenship required. Preferred Qualifications Electronic Technician 2: Electronics training is equivalent to 2 years of technical trade school or military technical school. RF test experience is a plus. Experience with component-level troubleshooting. Experience with VOM, DVM, and similar test apparatus. Experience with SAP, Microsoft Office suites What We Can Offer You: Northrop Grumman provides a comprehensive benefits package and a work environment that encourages your growth and supports the mutual success of our people and our company. Northrop Grumman benefits give you the flexibility and control to choose the benefits that make the most sense for you and your family. Your benefits will include the following: Health Plan, Savings Plan, Paid Time Off, and Additional Benefits, including Education Assistance, Training and Development, 9/80 Work Schedule (where available), and much more! Primary Level Salary Range: $53,500.00 - $89,100.00The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions.Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. Employees in Vice President or Director positions may be eligible for Long Term Incentives. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business.The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates.Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO and pay transparency statement, please visit *********************************** U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.

Voltguard Utilities Limited is seeking a highly skilled and motivated Electronic Technician to join our team. This remote, field-based position involves providing technical support, troubleshooting, and repair services across a range of client locations, vendor sites, and other facilities. The role requires an independent, detail-oriented technician with strong communication skills who can deliver high-quality service in diverse environments. Key Responsibilities: 1. Remote Technical Support and Field Service: - Provide on-site technical assistance, including installation, maintenance, and repair of electronic systems and equipment. - Travel frequently to client addresses, vendor facilities, and other off-site locations to address service requests and resolve technical issues. 2. Equipment Troubleshooting and Repairs: - Diagnose and repair faults in electronic systems, including circuit boards, controllers, and integrated systems. - Perform system tests, calibrations, and inspections to ensure optimal functionality and compliance with safety standards. - Replace or repair defective components, ensuring that all repairs meet manufacturer specifications and industry best practices. 3. Installation and Commissioning: - Install new electronic systems and equipment at client sites, ensuring correct setup and integration with existing infrastructure. - Conduct system commissioning, including testing and verification to confirm that installations meet operational requirements. 4. Preventive Maintenance and Upgrades: - Perform regular preventive maintenance on client systems to ensure continued reliability and minimize unplanned downtime. - Recommend and implement system upgrades or modifications to enhance performance and extend equipment lifespan. 5. Client and Vendor Liaison: - Serve as a key point of contact between Voltguard and its clients, providing professional and courteous customer service during all interactions. - Coordinate with vendors and suppliers to facilitate the timely delivery of replacement parts, equipment, and other resources required for repairs. 6. Technical Training and Knowledge Transfer: - Provide clients with detailed instructions and training on operating and maintaining their electronic systems. - Share insights and best practices to enhance client understanding and promote optimal system use. 7. Documentation and Reporting: - Maintain accurate records of all service activities, including repairs, installations, and maintenance visits. - Prepare detailed service reports, including diagnostics, performed work, and recommendations for future actions. 8. Compliance and Safety: - Ensure all work is performed in compliance with industry standards, safety regulations, and Voltguards internal guidelines. - Stay current with industry advancements and best practices, integrating them into day-to-day operations. Required Qualifications: - Proven experience as an Electronic Technician, with expertise in troubleshooting, repairing, and maintaining electronic systems. - Strong knowledge of electronic components, circuitry, and system integration. - Ability to work independently in remote locations with minimal supervision while managing service schedules and priorities. - Excellent problem-solving skills and the ability to analyze and resolve complex technical issues. - Strong communication skills, both verbal and written, to interact effectively with clients, vendors, and internal teams. Preferred Qualifications: - Associate or Bachelors degree in Electronics, Electrical Engineering, or a related field. - Experience with field-based or remote technical service positions. - Familiarity with industry safety standards and protocols. Additional Information: - The position requires frequent travel to various locations, including client sites, vendor addresses, and other remote locations. - Flexibility in scheduling, including occasional weekend or after-hours work, may be necessary to meet client needs. - Voltguard Utilities Limited offers ongoing training, professional development, and opportunities for career growth. Benefits: Voltguard Utilities Limited offers a competitive compensation package, which includes vacation days, sick days, paid holidays, a paid floating holiday of your choice, paid maternity & paternity leave, along with Medical, Dental, Vision, 401K, Optional Life insurance, and opportunities for professional development. We are dedicated to creating an inclusive and collaborative workplace where every team member can thrive. Compensation Information: $23 - 40 per hour + bonus eligible + benefits. Opportunities exist in multiple locations:

Under the direction of the Supervisor, Technical Services or designee, the Electronics Technician is responsible for the troubleshooting, repair, and maintenance of all electronic, logic, and digital equipment and electromechanical devices, including farebox revenue collection system equipment, destination signs, radio, video, and Intelligent Bus System (IBS) equipment for Pace divisions and contract carriers as applicable. Performs other duties as assigned. Essential functions include: Troubleshoots and repairs all farebox revenue collection system equipment. Troubleshoots and repairs all destination sign, radio, video, Intelligent Bus System (IBS) and other related equipment. Modifies and/or fabricates parts to keep equipment in good working order. Uses/maintains computer software/hardware equipment. Tracks equipment and issues through computer data entry. Maintains all records and forms in compliance with applicable regulations and in Pace requirements. Performing other duties as assigned or required. Qualifications Age: 21+ Education: Qualified candidate must have a high school diploma or equivalent. Certification/ License Requirements: Must have a valid driver's license with good driving history. Experience: Must have a minimum of five years of experience working in the field of electromechanics including logic systems, digital circuitry, and electro-mechanical devices and have a strong work history demonstrating the ability to excel in similar roles. Proficiencies: Must have knowledge in the areas of electro-mechanical devices, communications equipment, and complex electronic circuitry. Must be able to understand and operate electrical test equipment to support maintenance and repairs and to operate maintenance vehicles. Must be proficient in Microsoft Office applications (Outlook, Word, Excel, etc.) is preferred. Physical Requirements: Must be able to stand for extended periods of time; Lift up to 100 lbs. Working Conditions: Must be available to work 24 hours a day, 7 days a week, 365 days a year. Work is performed at garages and other facilities, including sites under construction which may be subject to extreme temperature and weather conditions as well as moderate to loud noise levels. Position requires the wearing of protective clothing and shoes and the use of appropriate safety and personal protective equipment. This position is not eligible for hybrid schedule or telecommuting. Salary: Full Salary Range: $54,732 - 107,952 Salary Midpoint: $81,342 Anticipated Starting Salary: $68,037 - 81,342 BENEFITS SUMMARY

Under general direction of the Team Leader(s) the Electronic Technician is responsible for repairing electronic product for manufacturing and field returns. Essential Role Responsibilities: Performs timely and efficient repairs of manufacturing product. Tests control board assemblies utilizing a PC to retrieve various engineering documents including but not limited to: schematics, assembly layouts, test procedures, and work instructions. Completes required supporting documentation for all returns. Sets\-up and operates various electronic test equipment using multi\-meters, oscilloscope, counters, thermo\-couple simulator, etc. Ensures quality control on product line and the adherence to standard operating procedures. Maintains clean and functional work stations, troubleshoot equipment as necessary, and adheres to safety policies and procedures. Promptly notify Team Leader regarding quality trends and issues. Performs other related duties as assigned by Team Leader(s). Requirements Strong organizational, interpersonal, and communication skills Must be self\-motivated, a team player with the ability to work in multi\-task environment Knowledge of production\/quality standards, and assembly procedures\/processes Work well independently, have electro\-mechanical ability\/aptitude, excellent hand and eye coordination Must be able to troubleshoot, interpret electronic schematics, read bill of materials, use test equipment, and in\-circuit testers Knowledge of Microsoft Office (Word, Excel, Outlook), MRP Systems, and QAD (Preferred) Essential Education & Experience: High School Diploma and\/or G.E.D Associates Degree in Electronics or Military Electronics Training 1\-2 years assembly experience of electro\-mechanical products 2\-3 years electronic control repair Food service manufacturing industry (Preferred) Work Conditions & Safety Physical demands and work environment: The physical demands and work environment characteristics listed here are representative of those that must be met by a Team Member to perform the essential functions of this job successfully. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Physical Requirements: Ability to sit or stand at assembly work cells for up to 6\-8 hours at time Must be able to lift\/carry\/push\/pull up to 40 pounds Work Conditions are normal for a manufacturing environment The work environment requires the use of safety equipment to include but not limited to: eye safety goggles, steel toe shoes\/boots, and hearing protections Benefits Health Insurance: Comprehensive medical, dental, and vision coverage. Retirement Plans: 401(k) plan with company match to help you plan for your future. Employee Wellness Programs: Access to wellness programs, onsite gym, Employee Assistance Program (EAP) Life Insurance: Basic and supplemental life insurance options. Disability Insurance: Short\- and long\-term disability coverage. Paid Time Off (PTO) "}}],"is Mobile":false,"iframe":"true","job Type":"Full time","apply Name":"Apply Now","zsoid":"667294733","FontFamily":"Verdana, Geneva, sans\-serif","job OtherDetails":[{"field Label":"Work Experience","uitype":2,"value":"1\-3 years"},{"field Label":"Industry","uitype":2,"value":"Manufacturing"},{"field Label":"City","uitype":1,"value":"Carol Stream"},{"field Label":"State\/Province","uitype":1,"value":"Illinois"},{"field Label":"Zip\/Postal Code","uitype":1,"value":"60188"},{"field Label":"Salary","uitype":1,"value":"21.02"}],"header Name":"Electronic Technician","widget Id":"4**********0072311","awli IntegId":"urn:li:organization:18758749","is JobBoard":"false","user Id":"4**********1692017","attach Arr":[],"awli ApiKey":"86ezhi1yg2oktx","custom Template":"3","awli HashKey":"c21b16e3c8dbe9654eb55b1f04069e035f8c6db8eb7bbfaef8f7140a02d1e24836ce4f3bfd6ba2a4417b8e86b4b2319190e2cbcb1a64c1be1235818ca8cd7d86","is CandidateLoginEnabled":true,"job Id":"4**********5587104","FontSize":"12","google IndexUrl":"https:\/\/lucasjamestalent.zohorecruit.com\/recruit\/ViewJob.na?digest=Nyi9VFWIsbMXNaN0qju4E0SogzVi6z0rbmjTY@nJvAY\-&embedsource=Google","location":"Carol Stream","embedsource":"CareerSite","indeed CallBackUrl":"https:\/\/recruit.zoho.com\/recruit\/JBApplyAuth.do","logo Id":"pcy573a2da6bcad414975813a806bd9435355"}

Candidates must be able to communicate effectively via telephone to clients. Repair and service of Company's Analytics (HA) equipment, from initial Quote to final repair / inspection of HA equipment sent in to the US Workshop for repair or calibration. To perform mechanical, electronic, and performance tests on a variety of HA equipment following general procedures and methods. To maintain records for all products Serviced in database (SAP). Individual must be a team player and willing to do other tasks as assigned outside of “Technician” classification. ESSENTIAL DUTIES and RESPONSIBILITIES: Repair and service company's analytic products to support the three lines of business (High Tech, Fixed, and Portables) Perform troubleshooting to component level using electronic tools to include digital voltage meters and other electronic testing tools. (Test fixtures / Software). Perform telephone support to customers and distributors to troubleshoot problems in the field. Maintain Service Reports / Quotations in database (SAP). Maintain Service Database on the HA shared drive to ensure proper customer information. Assist and maintain the refurbishment program. (Reconfigure / Calibrate). Qualifications EDUCATION: Associate Degree of Applied Science in Electronics or Equivalent Military Equivalent to AAS Electronics Degree EXPERIENCE: 2 or more years of experience in electro-mechanical system trouble-shooting to sub-assembly levels. Capable of reading assembly blue prints, wiring schematics, and configuration specifications. Use of specialized test equipment to include oscilloscope, Voltage Meters, etc. Must be able to effectively communicate with customers, distributors, co-workers, and other departments within the company. Must be computer literate (Word, Excel, Outlook) Siebel and SAP experience a plus. Able to lift 40 lbs Good Vision and manual Dexterity Work within a manufacturing facility Additional Information Pay: DOE Monday-Friday: Day Shift 6+ month contract period Must be able to pass a background check.

Min USD $18.34/Hr. Max USD $28.42/Hr. The Repair Technician performs and supervises the cleaning, assembly, repair and maintenance of all equipment provided by Memorial Home Services of CI, this includes home medical equipment, respiratory and all other home medical equipment and maintaining all appropriate documentation. This service or repair could be for equipment to be delivered in compliance with specific medical requirements, modifications to existing customer equipment, repair of damaged or malfunctioning customer equipment or routine service required by the manufacturer. This position also is required to be a backup for our oxygen trans-filler. Qualifications Education: Education equivalent to graduation from high school is required. Licensure/Certification/Registry: Must possess a valid IL driver's license and be deemed as an acceptable driver in accordance with the MHS Fleet Safety Policy (five year MVR will be required). Experience: One or more years of experience in HME/healthcare delivery, warehouse, oxygen, electrical maintenance and repair or related experience preferred but not required. Other Knowledge/Skills/Abilities: Possess basic mathematics and personal computer skills, with the ability to retrieve and enter limited amounts of data are required. Must be detailed oriented, organized, focused and personable. Ability to use a variety of medical testing equipment. Demonstrates the ability to push and pull up to 75 pounds. Responsibilities Troubleshooting - Respiratory Diagnose, repair, and/or modify equipment as needed in order to assure proper functioning of respiratory equipment. This may be done in the shop or in the field. Be skilled in troubleshooting respiratory equipment to determine type of service or parts necessary for repair. Provide excellent listening and communication skills to customers in troubleshooting service requests via telephone or in person. In case of equipment failure or breakdown, converse with the operator of equipment to ascertain if this mechanical or user error. That may prevent a tech to go out and exchange or repair equipment. Equipment Assembly Assemble any new equipment coming in to make sure it is patient ready for patient delivery/pick up. Repair Respiratory Equipment Provide service or repair for: Equipment to be delivered in compliance with specific medical requirements. Repair of damaged or malfunctioning customer equipment. Routine service required by the manufacturer. Be able to prepare and effectively communicate repair quotes. Be able to repair all types of medical equipment provided, including: Rental DME. Respiratory DME in a timely manner. Maintenance - All Medical Equipment Inspect incoming rentals for hours used, maintenance needed and repairs required. Inspect and process returns per company and infection control guidelines. Design and implement test procedures for outgoing and incoming equipment and, as needed, calibrate O2 testing equipment. Follow established maintenance schedule for each piece of rental equipment per specific equipment procedure requirements (concentrators, cylinders) and per manufacturer's recommendations. Maintain equipment in good working order and appearance and verify equipment is working properly. Monitor and report abnormal wear and tear to equipment that may be caused by customer misuse or abuse. Replace disposables as needed. When complex repairs are needed, ensure repairs are scheduled and completed. Perform a thorough check on wheelchairs, beds, etc., in house and in the field and verify equipment is working properly. Provide complete thorough documentation on all equipment purchased or rental. Cleaning and Sterilizing - All Medical Equipment Clean and sterilize equipment and make sure equipment ready for repair and maintenance Equipment is to be logged in the system as cleaned and if repaired. A written log of serial numbers is also documented of cleaned equipment for verification purposes This responsibility is to be rotated between all Repair Technicians Have good organizational skills and detailed oriented Crushes boxes when needed Checks eye wash station weekly Abides by all OSHA guidelines Make sure all cleaning solutions and chemicals are available for cleaning and sterilizing purposes Quality Improvement Supervise equipment delivered to maintain quality control. Verify complete shipments to customers. Verify equipment sale/rent to be in good working order before delivery. Thorough documentation on all rental equipment, including: Service date. Repair detail. Serial numbers. Cleaning dates and initial. Warranty information Parts & Equipment Inventory Maintain an adequate and appropriate supply of repair parts. Purchase special parts only as needed and on the most cost efficient basis. Place all items received for stock into their appropriate locations on a daily basis. Perform accurate physical inventory daily on parts and serialized equipment Shipping and Receiving Possess skill in efficient preparation of products for shipping on a daily basis. Receive all items shipped on a daily basis. Verify accuracy of shipment, notify appropriate parties of shipments received, and record properly for inventory purposes. New equipment needs to be unpacked, noted for inventory and stocked quickly. Notify vendor and purchasing of damage or shortage immediately and follow up. Manuals, Documentation and Knowledge. Maintain up-to-date files of manufacturer's repair and maintenance manuals on the P Drive of all HME equipment owned by the company (as available) and other related documentation. Have familiarity with service requirements of each piece of equipment owned by this company. Maintain well-organized and current documentation for all maintenance and repair to DME and respiratory related equipment, including equipment tracking and maintenance logs. Create, submit, and maintain proper paperwork for warranty work. When appropriate, be able to create or process proper billing materials. Trans-filling Back up Required Participates in, and successfully completes, all required onsite, offsite, and on-the-job training to ensure the safe and compliant execution of all job duties. Keeps abreast of procedural and safety changes as new equipment or regulatory guidelines are introduced. Trans-fills bulk liquid oxygen into high pressure cylinders. Adheres to safety and security procedures at each step. Documents processes undertaken as procedures are performed; ensures compliance with FDA documentation requirements. Monitors and updates documentation and tracking system(s) related to the purchase, issuance, recall, repair, and maintenance of oxygen transfer equipment and related components and accessories. Performs other related work as required or requested.

Provides the highest level of expertise required to service, repair and "return-to-operation" molds that are actively engaged in producing quality products. ESSENTIAL DUTIES AND RESPONSIBILITIES · Maintains customer satisfaction by maintaining and directing the maintenance of molds and ancillary equipment used in producing product. · Ensures the quality fabrication and maintenance of injection molds, dies jigs, fixtures and other devices used in furthering production of the customers' parts. · Enhances team efficiency by training and directing less experienced mold repair personnel. · Oversees and performs preventive maintenance on molds and on mold performance tracking the maintenance with accurate and timely documentation. · Provides process improvement recommendations and forecasts any potential quality or production issues from tooling lead. · Runs all manual shop equipment as required. · Troubleshoots and analyzes problems before any repairs are initiated. · Supports production by repairing, adjusting and maintaining all forms of equipment used in the production process. · Supplies expertise and direct action in modifying molds to produce a superior quality product. · Maintains stock inventories by ensuring the proper levels of component parts are available at all times for tooling repair. · Improves the efficiency and accuracy of molded products by the documenting reasons for mold repairs and solutions to prevent future manufacturing interruptions. · May perform other duties and responsibilities as assigned. JOB QUALIFICATIONS KNOWLEDGE REQUIREMENTS · Industry and Plastics Mold Knowledge · Detail Oriented · Responsiveness · Problem Solving/Trouble Shooting · Master Craftsmen Ability · Team Participation Skills · Ability to Operate All Manual Mold Shop Equipment and Machines

LHH Recruitment Solutions has partnered with a growing organization, and they are seeking a motivated Field Service Technician to join their team. This is a unique opportunity for someone who thrives on travel, technical challenges, and making a real impact at customer sites across the U.S. and internationally. Why Consider This Opportunity? Work with Cutting-Edge Technology: You'll troubleshoot and program PLCs, including Siemens and Allen Bradley controllers, and set up advanced systems like Siemens LMV5. Diverse Environments: From power plants to ship engine rooms, every day brings new challenges and learning opportunities. Career Growth: Training and development opportunities, including working with industry-leading equipment and technologies. Key Responsibilities: Perform start-ups and commissioning of industrial pressure vessels and boilers at customer locations nationwide and abroad. Troubleshoot, program, and optimize PLCs (preferably with RS Logix500), HMIs, and combustion systems. Conduct operational testing and calibration of burners and fuel/air ratios using advanced diagnostic tools. Provide expert support to customers and field technicians, both onsite and remotely. Document technical procedures and contribute to instruction manuals for end-users. Maintain clear communication through trip reports and technical documentation. Qualifications and Skills: Bachelor's Degree in Engineering is a plus. 4+ years in field service experience, with strong PLC troubleshooting and programming skills. Hands-on expertise with pressure vessels, boilers, hydraulic and pneumatic systems, and combustion analyzers. Experience setting up Siemens LMV5 systems. Willingness to travel extensively (up to 90%), including occasional international assignments. Compensation Range: $38/hr - $42/hr Benefits Offered: 2 weeks of vacation, paid sick leave where applicable by state law, Medical Insurance, Dental Insurance Vision Insurance, 401K, and Life Insurance. If you are a passionate Field Service Technician looking for a new and rewarding career, please apply today! You don't want to miss out on this opportunity! LHH is a leader in permanent recruitment-and in the placement of top talent. Our areas of specialty include office administration, customer service, human resources, engineering, and supply chain and logistics. Please feel to check us out and apply for other opportunities if this role isn't a perfect match. Equal Opportunity Employer/Veterans/Disabled To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit **************************************

Safely maintain, repair and rehab equipment in multiple areas within the Maintenance Division; Plumbing, Kitchen Equipment Repair, HVAC/R, Aquatic Systems & Water Quality. Responsibilities: Perform daily, weekly and monthly inspections of assigned equipment and locations Perform rehab work on assigned equipment and locations Maintain, install, repair and trouble-shoot various items, equipment and locations Inspect equipment and locations for malfunctions and repair Perform routine preventative maintenance on various pieces of equipment Assist with keeping a daily duty log of maintenance work performed as well as accurate records of preventative maintenance Effectively and professionally communicate and coordinate with other departments within the park. Comply with company procedures, policies and safety standards Help to ensure compliance with government codes and corporate mandates. All other duties as assigned. Qualifications: Knowledge of Plumbing, HVAC/R, Aquatic Systems and Water Quality Should possess practical skills and willingness to learn in all of the respective areas; Plumbing, HVAC/R, Aquatic Systems, and Water Quality Experience with electrical, plumbing & natural gas systems preferred Ability and willingness to work any shift and on weekends and holidays as needed Must be able to trouble-shoot clearly, calmly and safely in the presence of Guests and fellow Team Members Must possess strong safety sensitivity & ability to work with many different types of devices High School Diploma or equivalent Must possess a valid Driver's License By applying, you consent to your information being transmitted by Veritone to the Employer, as data controller, through the Employer's data processor SonicJobs. See Cedar Fair - Charlotte Terms & Conditions at ******************************* and Privacy Policy at ********************************* and SonicJobs Privacy Policy at ******************************************* and Terms of Use at ********************************************* PandoLogic. Category:Installation & Maintenance, Keywords:Maintenance Technician, Location:Waukegan, IL-60079