Engineer jobs in Biddeford, ME

Diodes Incorporated is seeking a full-time equipment engineer to join our talented manufacturing team. This position requires a flexible schedule and the willingness to work occasional overtime. You will be responsible for multiple activities with respect to future planning, project execution, maintenance and repair of semiconductor manufacturing equipment. These activities would include deliverables such as troubleshooting and repairs, continuous improvements to help with availability, cost savings and OEE. Good written skills for creating and updating activity checklists, corrective and preventative maintenance procedures, and specification updates, as well as good interpersonal skills to provide clear technician direction and training and present data to management. Must have good project execution acumen, strong semiconductor equipment experience and be comfortable working in a fast-paced manufacturing environment and taking ownership of equipment within your assigned area. Principle Duties and Responsibilities: Working hours: 40-hour work week, Monday through Friday. OT is expected in order to keep your assigned area running as smoothly as possible. Work is performed within a clean room environment that requires the wearing of a smock, hood, booties, latex gloves, and safety glasses. Requires the use of airline respirator. Requires occasional wearing of personal protective equipment including, but not limited to, aprons, gauntlets, and full-face masks. Requires lifting of objects that weigh up to 50 lbs. May require work with hazardous gases, chemicals, and high voltages. Troubleshoot and repair electromechanical systems. Troubleshoot and repair electro-pneumatic systems. Consistently directs one's own work at a high level and demonstrates advanced leadership skills for small teams and is sought out as a subject matter expert for assigned area. Follows procedures without deviation and update them as needed. Discusses repair and maintenance requirements with peers and balances work with available talent. Reviews tool histories for all area tools looking for common themes and proposes improvements / repairs and executes on them. Identifies abnormal tool conditions and execute corrective actions. Has clear technical knowledge of the equipment and its sub-systems within area assigned. Has process knowledge enough to understand recipes and the desired outcomes. Understands and uses SPC charts to identify failure modes. Responsible for the completion of all scheduled and unscheduled preventative maintenance and repair procedures in a timely, accurate, and safe manner within assigned area. A safety-minded approach is required: employees must be able to learn, understand and follow all safety documentation, specs and protocol, including LOTO. Must also be able to identify any/all safety concerns and regulatory violations in order to eliminate them. May possibly be cross trained in other areas as needed Knowledge, Skills and Abilities: Strong electrical/mechanical semiconductor knowledge. Ability to perform He-Leak checks of gas and vacuum systems. Comfort handling chemicals, including acids, bases, and solvents. Experience troubleshooting electrical issues. Experience troubleshooting vacuum systems. Ability to read electrical schematics Ability to use digital multimeters and voltage supplies. Ability to work well in a collaborative environment, and as part of a team. The flexibility to work outside of normal schedule, cross train, (learn more than one job or operation) and multi-task as needed. A BS in Engineering or relevant technical discipline, or Military Equivalent. Diodes Incorporated (Nasdaq: DIOD), a Standard and Poor'sSmallCap 600 and Russell 3000 Index company, is a leading global manufacturer and supplier of high-quality application specific standard products within the broad discrete, logic, and analog semiconductor markets. Diodes serves the consumer electronics, computing, communications, industrial, and automotive markets. We offer a competitive benefits package to include medical, dental, vision, FSA, 401k with company match, company paid Short Term and Long-Term disability and standard life insurance policy. We also provide paid time off and an employee wellness program.

Junior Signal Integrity Engineer Ardent Concepts, an Amphenol company, is a leading designer and manufacturer of high performance multicoaxial and coaxial interconnect assemblies, connectors, and interfaces used in the development of next generation semiconductors, quantum computers, and electronics systems. Ardent was built on core technologies that yield the smallest, fastest, and most electrically efficient compression mount connector interfaces worldwide. As data rate requirements increase and devices and systems shrink, Ardent's products deliver superior signal integrity in a dense footprint that can be reusable across programs to maximize cost savings. Our focus is on helping bring next generation computing to market through novel connector designs for test & measurement, OEM applications, and specialized military applications. Ardent's patented contact technologies are well suited for advanced multi-GHz applications such as board stack connectors, coaxial connectors, FPGA sockets, flex circuit connectors, probe interfaces, and mezzanine card connectors. We have a complete line of high-performance interfaces for the most advanced chipsets such as RF devices, ASICS, switches, processors, and MEMS devices. We support chip to chip, chip to board, board to board, and flex to board applications. We are currently seeking a Junior Signal Integrity Engineer to join our team and lead the Ardent SI community and help drive new product development. Ardent has experienced explosive growth in the last 5 years and it is imperative that we stay ahead of the technology requirement in interconnect. This position is located in our Hampton, NH office. RESPONSIBILITIES: Assist Senior Signal Integrity Engineer in all aspects of optimizing PCB structures for maximum performance with TR Multicoax 90 GHz products. Collaborate with Applications Engineers to gather all necessary data for initiating the optimization process. Create models in CAD software using collected data; familiarity with SolidWorks and Geometric Dimensioning and Tolerancing (GD&T) is a plus, or a willingness to learn. Run and import models in 3D EM software for analysis. Track each step of the optimization process to accurately measure duration and identify opportunities for targeted process improvements. Maintain detailed records of each optimization to provide accurate feedback to Applications Engineering on process duration by PCB structure type. This historical data will support more accurate customer lead time estimates by accounting for varying complexity. Perform end-to-end optimizations with guidance from the Senior Signal Integrity Engineer. QUALIFICATIONS: BS in Electrical Engineering, MS/PhD in Electrical Engineering is preferred. 0-3 years of industry experience with an understanding of electro-magnetic principles for digital signal integrity Experience with CAD tools such as SolidWorks is a plus, or a willingness to learn. Experience in component design and application of high-speed connectors into communications equipment is a plus Familiarity with Geometric Dimensioning and Tolerancing (GD&T) is a plus. Experience with signal integrity measurements and debugging with TDR, VNA, pattern generators, error detectors and similar measurement equipment. Experience with RF Engineering Experience with signal integrity and simulation/analysis tools such as Ansys HFSS and Designer, CST Microwave, HSPICE, MATLAB, and ADS is a plus Hands-on experience with frequency-domain and time-domain component and circuit characterization including understanding of test and calibration methods Strong attention to detail and ability to maintain organized, accurate records of technical work. Ability to communicate effectively to internal and external stakeholders This position requires access to controlled technology that is subject to US export controls. Qualified candidates must be a US Person (including US Citizen, lawful permanent resident, or protected individual as defined by 8 U.S.C. 1324b(a)(3)) or eligible to obtain required authorization(s) from the U.S. Government.

Gale Associates, Inc. is seeking a Project Architect or Engineer for our Building Enclosure Design and Consulting Group located in Portland, ME. Gale is a well-respected national engineering/planning firm celebrating over 61 years in business and rated one of Zweig Group's “Best Firms to Work For” for the past 12 consecutive years. Requirements: A Minimum Bachelor's Degree in Civil Engineering, Construction, Structural Engineering, Architecture or Architectural Engineering Technology and a minimum of 5 years in exterior building envelope renovations, analysis, design and construction administration. Technical experience in building envelope and experience with moisture intrusion, evaluations, and renovation designs is essential. Registration path required, an EIT, P. E. or AIA Registration is preferred. Excellent written/presentations skills and proficient computer skills (MS Office, CAD, and Outlook are required). A competitive salary is only one part of the benefits that Gale provides to compensate and recognize staff. Salary range: $101,200-$109,800 annually Gale offers a strong mentoring program that promotes advancement opportunities for all staff. In addition, Gale takes pride in our balanced work environment which includes monthly events that provide time for our Gale Team to socialize. Please visit our careers section at ********************** for more details. First-day coverage benefits including: Harvard Pilgrim Health Insurance Delta Dental & EyeMed Vision insurance Health Savings Account (HSA) Flexible work schedule/remote options Half-day Friday's year round 401(k) Profit Sharing Plan and Trust 3 weeks' vacation accrual upon hire 12 annual paid holidays, competitive sick & personal time Tuition reimbursement program for continuing education programs College loan-repayment program Fully-paid Life/Disability insurance Flexible Spending Account and Dependent Care Assistance programs Gale is an Equal Opportunity Employer - Veteran/Disability

BGIS is currently seeking a Critical Facility Engineer to join the team in Lewiston, ME BGIS is a leading provider of integrated real estate management services, including facilities management, project management, energy & sustainability services, strategic workplace consulting, real estate services and capital planning. Its range of solutions, supported by efficient systems, processes, and people, enables it to create and optimize places that work for its clients. The team is dedicated to inspiring better business performance and helping clients focus on their core businesses. Purpose Statement: Maintain critical mechanical, electrical, and control systems in a critical environment facility. RESPONSIBILITIES Customer Service Maintain a positive and professional working relationship with internal and external clients. Respond to customer service requests in a timely manner. Respond to emergency calls. Maintain Data Center Systems Performs maintenance to ensure the highest level of efficiency without disruption to the business. Perform routine maintenance tasks in accordance with BGIS Safety Policy and Procedures. Inspect buildings, grounds, and equipment for unsafe or malfunctioning conditions. Troubleshoot, evaluate and recommend system upgrades. Order parts and supplies for maintenance and repairs. Solicit proposals for outsourced work. Work with vendors and contractors to ensure their work meets BGIS and Client standards. Accurate and timely completion of work order requests. Escalate issues to Critical Environment Facility Manager as needed. Other duties as assigned. Required Education, Knowledge, and Abilities Must demonstrate a working knowledge of mechanical, electrical, and life safety systems typically used in critical environments. High school diploma or equivalent or equivalent work experience required. Working knowledge of Microsoft Office Suite - Word, Excel, Outlook. Visit us online at ******************************** for more information. Our company culture includes a robust mix of sound business practices and employee initiatives that promote personal and professional development, work/life balance, health and wellness and community involvement. The Company is an equal opportunity employer. We believe every employee has the right to work in surroundings that are free from all forms of unlawful discrimination. We are committed to providing equal employment opportunity to all employees and applicants without regard to race, color, religion, gender, national origin, age, disability, ancestry, creed, marital status, sexual orientation, or Veteran or military status, genetic information or any other basis prohibited by local, state or federal law in the relevant jurisdiction. This policy applies to all terms and conditions of employment including, but not limited to employment, advancement, assignment, and training. BGIS is committed to strengthening our diversity through recruiting and retaining minority and women professionals from all backgrounds. Our commitment is consistent with our recognition that it is the outstanding people within BGIS who the source of our strength has always been. We recognize that promoting diversity is an integral component of our continuing quest for organizational excellence. This commitment to Equal Employment Opportunity is made equally as a social responsibility and as an economic and business necessity. Anyone with questions or concerns regarding Equal Employment Opportunity should contact their direct supervisor or the Human Resources Department without fear of retaliation of any kind. The hourly range for this position in the US is $34-$38. A candidate's salary offer is determined by various factors including, but not limited to, relevant work experience, knowledge, skills, abilities, education, certifications, licenses, and location. BGIS offers a comprehensive benefits package including medical, dental, vision, prescription coverage, health savings account, flexible spending account (both healthcare and dependent), 401(k) with a Company match, Paid Time Off, paid company holidays, short term and long-term disability, life insurance, employee assistance program, tuition reimbursement, paid parental leave, gym membership discount and team member referral bonus. Our dedication to the principle of pay equity is steadfast. We believe in equal pay for work of equal value. #LI-JV1

Fast Growth Biotech co is expanding 25% annually. Full benefit and PTO package, modern state of the art facilities. Management support growth + learning for their staff. The Sr. Mechanical Design Engineer is a multi-faceted position with a primary focus on test fixtures, production fixtures, product revision and new product design. You'll work collaboratively with Electrical Engineering and Process Engineering developing designs to support customer orders from concept to completion. The Sr. Design Engineer gets involved in R&D, prototyping, analysis, and applications engineering support. A successful candidate will be an energetic, organized and highly motivated individual with a high level of accountability, who enjoys thriving in a fast-paced environment. RESPONSIBILITIES & DUTIES: Design parts & equipment to meet customer specifications and requirements. Generate 3D models, drawing packages, bills of materials and O&M Manuals. Perform necessary engineering calculations to validate or improve designs. Work collaboratively with electrical engineering and process engineering groups. Participate in new product development. Participate with quality control. EDUCATION/EXPERIENCE: Bachelor's degree in Engineering, preferably Mechanical Extensive experience working in design engineering; high preference for experience in injection molded parts, electro-mechanical design and/or medical industry components Proficiency in 3D CAD, Solidworks or Autocad CORE COMPETENCIES: Strong attention to detail. Aptitude for problem solving.

BerryDunn is seeking an experienced Systems Engineer to manage and optimize our hybrid IT infrastructure, including on-premises and Azure environments. This role combines traditional systems engineering responsibilities with strategic collaboration to support a centralized IT model for BerryDunn's consulting team. You will play a critical role in aligning technology solutions with firm-wide initiatives, ensuring consistency, security, and scalability across internal and consulting related projects. This includes working closely with consultants to understand business needs, integrating IT standards into solutions, and driving efficiencies through automation and standardized processes. This position will sit out of our Portland, Maine office and report to the Manager of Enterprise Systems. Travel Expectations: Minimal if any travel is expected, up to 5% You Will Automation & Efficiency Develop and maintain automation solutions using PowerShell to enhance system efficiency and reduce manual tasks. Identify opportunities for process automation and implement solutions to improve productivity. Write, test, optimize, and troubleshoot PowerShell scripts, modules, and Bicep templates for infrastructure provisioning, configuration, and maintenance. Ensure all production code is maintained in source control. Infrastructure Management Oversee and enhance both on-premises hyperconverged infrastructure and Azure cloud resources to maintain strong security, high availability, and scalability. Design, implement, and configure Azure services, including virtual machines, resource groups, RBAC, networking, and storage. Database Administration Administer and maintain SQL databases, including performance tuning, backups, indexing, upgrades, and security management. Collaboration & Governance Work closely with Systems Administrators, Engineers, and other IT team members to deliver secure, functional solutions. Partner with BerryDunn's consulting team to align technology solutions with business objectives and integrate IT standards into solutions. Contribute to technical standards that ensure secure and consistent experiences across firm technology and workflows. Documentation & Reporting Create and maintain detailed documentation for system configurations, procedures, and automation scripts. Generate regular reports on system performance, automation progress, and incident resolutions. You Have Bachelor's degree in Computer Science, IT, or related field (or equivalent experience). Proven experience in Azure administration, automation, and PowerShell scripting (including module development). Experience with infrastructure-as-code tools (Bicep, ARM Templates, DSC). Proficiency in Microsoft Azure services (VMs, AD, storage, Automation Accounts, Functions). Strong knowledge of Microsoft 365 technologies (Exchange Online, Intune, SharePoint Online, Teams). Experience with source control (Git, Azure DevOps, GitHub). Familiarity with SQL database administration. Excellent problem-solving and troubleshooting skills. Strong communication and collaboration abilities. Self-motivated and able to work independently and as part of a team. Relevant Azure certifications are a plus. Experience with Microsoft Copilot and GitHub Copilot is a plus. Amazon Web Services (AWS) experience is a plus. Compensation Details The base salary range targeted for this role is $95,000 - $120,000. This position may also be eligible for a discretionary annual bonus based on factors such as company and personal performance. This salary range represents BerryDunn's good faith and reasonable estimate of the range of possible compensation at the time of posting. If an applicant possesses experience, education, or other qualifications more than the minimum requirements for this posting, that applicant is encouraged to apply, and a final salary range may then be based on those additional qualifications; compensation decisions are dependent on the facts and circumstances of each case. The salary of the finalist selected for this role will be based on a variety of factors, including but not limited to years of experience, depth of experience, seniority, merit, education, training, amount of travel, and other relevant business considerations. BerryDunn Benefits & Culture Our people are what make BerryDunn special, and in return we strive to support our employees and help them thrive. Eligible employees have access to benefits that go beyond what's expected to support their physical, mental, career, social, and financial well-being. Visit our website for a complete list of benefits and a look into our culture: Experience BerryDunn. We will ensure that individuals are provided reasonable accommodation to participate in the job application or interview process or perform essential job functions. Please contact ********************* to request an accommodation. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender, gender identity or expression, or veteran status. We are proud to be an equal opportunity workplace. About BerryDunn BerryDunn is the brand name under which Berry, Dunn, McNeil & Parker, LLC and BDMP Assurance, LLP, independently owned entities, provide services. Since 1974, BerryDunn has helped businesses, nonprofits, and government agencies throughout the US and its territories solve their greatest challenges. The firm's tax, advisory, and consulting services are provided by Berry, Dunn, McNeil & Parker, LLC, and its attest services are provided by BDMP Assurance, LLP, a licensed CPA firm. BerryDunn is a client-centered, people-first professional services firm with a mission to empower the meaningful growth of our people, clients, and communities. Led by CEO Sarah Belliveau, the firm has been recognized for its efforts in creating a diverse and inclusive workplace culture, and for its focus on learning, development, and well-being. Learn more at berrydunn.com. #BD_OPS Don't See A Match For You At This Time? We invite you to join our Talent Connection and let's stay in touch

Title: Systems Design Engineer IV Hiring Organization: Connexion Systems & Engineering Compensation, Benefits, and Employment Type Duration: Permanent Pay rate: $ 125,000-154,000 salary Job Location: Smithtown, NY Job#: 17154 Overview: The Systems Design Engineer IV assesses and evaluates requirements and formulates system design concepts for designs of increasing complexity. They also lead technical projects, monitor project scope, respond to engineering concerns, and support bid and proposal activities. Responsibilities: Research and learn advanced aspects of DC motor design, DC motor controllers, & position feedback devices. Act as a liaison between technical groups and stakeholders to coordinate system installations and ensure technical compatibility and satisfaction Understand and analyze project requirements and business expectations Provide management reports as requested Participate in cross-functional team as lead system designer Implement and simulate new designs Support bid and proposal activities Understand and conform to all company policies and procedure Qualifications: Generally eight (8) years or more of experience in integrated electronic system design Strong Mechanical Mechanism experience Experience w/ servo system design Electrical Engineering (Bachelor's degree) Applicable experience in lieu of a Degree may be considered

Job Description Amphenol Communications Solutions (ACS), a division of Amphenol Corporation, is a world leader in interconnect solutions for Communications, Mobile, RF, Optics, and Commercial electronics markets. Amphenol Corporation is one of the world's largest designers and manufacturers of electrical, electronic and fiber optic connectors and interconnect systems, antennas, sensors and sensor-based products and coaxial and high-speed specialty cable. ACS has an expansive global presence in research and development, manufacturing, and sales. We design and manufacture a wide range of innovative connectors as well as cable assemblies for diverse applications including server, storage, data center, mobile, RF, networking, industrial, business equipment, and automotive. Position: Signal Integrity Engineer Location: Hampton, NH Ardent Concepts, an Amphenol company, is a leading designer and manufacturer of high performance multicoax and coaxial interconnect assemblies, connectors, and interfaces used in the development of next generation semiconductors, quantum computers, and electronics systems. Ardent was built on core technologies that yield the smallest, fastest, and most electrically efficient compression mount connector interfaces worldwide. As data rate requirements increase and devices and systems shrink, Ardent's products deliver superior signal integrity in a dense footprint that can be reusable across programs to maximize cost savings. Our focus is on helping bring next generation computing to market through novel connector designs for test & measurement, OEM applications, and specialized military applications. Ardent's patented contact technologies are well suited for advanced multi-GHz applications such as board stack connectors, coaxial connectors, FPGA sockets, flex circuit connectors, probe interfaces, and mezzanine card connectors. We have a complete line of high-performance interfaces for the most advanced chipsets such as RF devices, ASICS, switches, processors, and MEMS devices. We support chip to chip, chip to board, board to board, and flex to board applications. We are currently seeking a Signal Integrity Engineer to join our team and lead the Ardent SI community and help drive new product development. Ardent has experienced explosive growth in the last 5 years and it is imperative that we stay ahead of the technology requirement in interconnect. This position is located in our Hampton Beach, NH office. RESPONSIBILITIES: Contribute to dedicated teams responsible for customer system development and support from concept to production. Develop integration and test strategies in support of new product introduction. Assist with providing solutions to customers across a wide range of sectors with their high-speed data transmission requirements Communicate solutions directly to customers and associated stakeholders, internally and externally Design and evaluate next generation production test platforms. Support the production line testing by analyzing data in a fast-paced manufacturing environment Work directly with production line test technicians to oversee daily product testing and troubleshoot failure modes when required Support the internal Sales Engineers to develop strategies for product break-in at existing and new accounts based on signal integrity and electrical engineering expertise. Design, simulation, characterization, and application of high-speed electrical connectors and cable-based interconnect Share knowledge and pursue continuous improvement in methods and workflows. Design, build, and measure circuit boards for measurement and verification of products Apply circuit theory and high-speed digital transmission, PCB layout principles for high-speed digital design QUALIFICATIONS: BS in Electrical Engineering, MS/PhD in Electrical Engineering is preferred. 2-5 years of industry experience with an understanding of electro-magnetic principles for digital signal integrity Experience in component design and application of high-speed connectors into communications equipment is a plus Experience with signal integrity measurements and debugging with TDR, VNA, pattern generators, error detectors and similar measurement equipment. Experience with signal integrity and simulation/analysis tools such as Ansys HFSS and Designer, CST Microwave, HSPICE, MatLab, and ADS Hands-on experience with frequency-domain and time-domain component and circuit characterization including understanding of test and calibration methods Ability to communicate effectively to internal and external stakeholders This position requires access to controlled technology that is subject to US export controls. Qualified candidates must be a US Person (including US Citizen, lawful permanent resident, or protected individual as defined by 8 U.S.C. 1324b(a)(3)) or eligible to obtain required authorization(s) from the U.S. Government. Amphenol Corporation is proud of our reputation as an excellent employer. Our main focus is to provide the highest level of support and responsiveness to both our employees and our customers, the world's largest technology companies. Amphenol Corporation offers the opportunity for career growth within a global organization. We believe that Amphenol Corporation is unique in that every employee, regardless of his or her position, has the ability to positively impact the business. Amphenol is an "Equal Opportunity Employer" - Minority/Female/Disabled/Veteran/Sexual Orientation/Gender Identity/National Origin For additional company information please visit our website at ****************************

IDEXX is looking for an experienced Principal R&D Engineer, Diagnostic Consumables to lead the development of high-volume, single-use consumables for our veterinary diagnostics platforms. In this role, you'll work at the intersection of engineering, life sciences, and manufacturing-collaborating with assay scientists, instrument teams, and external partners to bring innovative, cost-effective products to market. From early material selection to physics-based modeling and USDA-compliant commercialization, your impact will be felt across the entire product lifecycle. What you'll do: Own the technical vision for diagnostic consumables, guiding concept development from material selection through commercialization. Drive advanced modeling and simulation (ANSYS, COMSOL) to establish design principles across fluidic, thermal, and mechanical domains. Shape cross-functional strategy by partnering with assay scientists, instrument engineers, and external vendors to deliver integrated, scalable solutions. Lead design reviews and risk assessments ensuring robust validation strategies and regulatory compliance under USDA standards. Mentor and develop junior engineers, fostering technical excellence and building organizational capability in diagnostic system engineering. Influence long-term roadmaps, contributing to portfolio planning and innovation pipelines that expand IDEXX's diagnostic capabilities. Champion manufacturability and cost-effectiveness, ensuring designs translate seamlessly into high-volume, regulated production environments. Contribute to technical roadmaps and mentor junior team members What you need to succeed: Ph.D. or Master's in Mechanical Engineering, Biomedical Engineering, Materials Science, or related field 8+ years of experience in diagnostic consumables or medical device development Strong proficiency in analytical modeling; SolidWorks experience is a plus Proven success in high-volume, regulated manufacturing environments Excellent communication, leadership, and cross-functional collaboration skills Experience designing and integrating microfluidic systems Familiarity with high-volume web-based manufacturing technologies Track record of developing high-volume assay consumables or diagnostic products What you can expect from us: Salary range starting at $160,000 based on experience Opportunity for annual cash bonus Health / Dental / Vision Benefits Day-One 5% matching 401k Additional benefits including but not limited to financial support, pet insurance, mental health resources, volunteer paid days off, employee stock program, foundation donation matching, and much more If you're looking for a role that'll challenge you, offer a variety of work and learning, while helping an amazing industry, we'd love to hear from you! Why IDEXX: We're proud of the work we do because our work matters. An innovation leader in every industry we serve, we follow our Purpose and Guiding Principles to help pet owners worldwide keep their companion animals healthy and happy, to ensure safe drinking water for billions, and to help farmers protect livestock and poultry from disease. We have customers in over 175 countries and a global workforce of over 10,000 talented people. So, what does that mean for you? We enrich the livelihoods of our employees with a positive and respectful work culture that embraces challenges and encourages learning and discovery. At IDEXX, you will be supported by competitive compensation, incentives, and benefits while enjoying purposeful work that drives improvement. Let's pursue what matters together. About the job location: If you're thinking about relocating for this role, here are a few things to know about living in Maine (often called “Vacationland”). The Westbrook, ME area provides great access to active downtown areas and the outdoors, with the coast and numerous mountains and hiking trails nearby. You'll also find a number of large companies like ours in the area, creating a vibrant work culture. You can learn more on the Portland tourism website: ************************************************************** IDEXX values a diverse workforce and workplace and strongly encourages women, people of color, LGBTQ+ individuals, people with disabilities, members of ethnic minorities, foreign-born residents, and veterans to apply. IDEXX is an equal opportunity employer. Applicants will not be discriminated against because of race, color, creed, sex, sexual orientation, gender identity or expression, age, religion, national origin, citizenship status, disability, ancestry, marital status, veteran status, medical condition, or any protected category prohibited by local, state, or federal laws. While we appreciate our staffing partners, we are unable to accept unsolicited agency resumes. #LI-CAG

Job Description Our Direct Client has a new Optical Transmission System Test Engineer job. As an Optical Transmission Test engineer you will define, plan, and execute test programs in support of the development and delivery of undersea optical transmission systems. The successful candidate will be responsible for developing and executing qualification test plans to validate HW/SW/FW product features based upon product requirements. Responsibilities include the management of laboratory equipment to facilitate testing and troubleshooting as well as documenting test results. The individual will report to the Manager of System Test and work as part of a team of system testers that actively collaborate with R&D, Test & Commissioning, Manufacturing, Project Management, Sales, NOC, and Field Support organizations that help design, deliver and maintain undersea optical communication systems. All aspects of optical communications will need to be covered in such work. Some travel will be required for fieldwork. Key technologies driving the test programs are DWDM transmission, coherent detection transmission, optical amplifiers, nonlinear optical transmission in fibers, optical polarization effects, and OADM systems. Responsibilities • Knowledge required in optical transmission testing including OTN OTU1-4, SDH STM1-64, PDH E1-E5, Ethernet 100base-100Gbps, optical gain and loss, OSNR, BER, PMD, PDL, dispersion, nonlinear processes eye diagrams, and related measurements. • Responsible for working with systems engineers, software engineers and hardware engineers to generate and execute test plans in a timely manner • Plan and execute tests to verify compliance with data and telecom standards • Plan and execute DWDM transmission tests • Document test results • Configure and maintain lab test systems • Plan and execute customer demonstrations • Strong laboratory, analytic, and communication skills are required, and the candidate must be able to work both as a team leader or a contributing member of a team • Proficient in Linux • Ability to operate and revise test automation software is preferred Qualifications • M.S. in EE, Optics or Physics or B.S. and relevant experience in the field of fiber optics and/or coherent optical communication. • Strong communications and presentations skills required. • 12 years of relevant experience • Knowledge in programming languages preferred. If you are interested in this Optical Transmission System Test Engineer job please apply now to be connected with one of our team members. Please note: Applying to this role is an agreement to have your information entered into our database and acknowledgement that a recruiter will reach out to you either by phone, email, and/or text message regarding this and similar job opportunities. Aquinas Consulting is a woman and minority owned company headquartered in Milford, CT that provides Engineering, Information Technology (IT), and Manufacturing staffing solutions throughout the US. We take pride in 20 years of service to our clients, our hiring managers, our consultants, and our local community. Aquinas is an affirmative action, equal opportunity employer and committed to considering all qualified applications without regard to race, genetic information, sex, age, color, religion, national origin, veteran status, disability or any other characteristic protected by law. *************************

Key Responsibilities MUST HAVE A PE-Will not be stamping during contract phase The Mechanical Buildings Design Group provides HVAC and plumbing solutions for Global projects. The Mechanical Engineer level 5 position is responsible for the engineering and design of the HVAC and plumbing systems in various types of facilities. The HVAC Team is engaged in the following: Design and Construction Activities o Project Delivery Methods - Traditional Design-Bid-Build and Alternative Conceptual-Bid- Build. o Facility Types -Water Treatment, Power Generation buildings, and Substations. o Systems -HVAC and Plumbing. o Type of Areas -Waste water treatment buildings, Administrative, Warehouse, Maintenance, Workshop, Laboratory, Chemical Storage & Handling, Electrical Distribution Center, Low & Medium Voltage Switchgear, and Pump Areas. Studies o Energy Audit/Efficiency - Engineering studies, system performance reviews, and energy compliance calculations o Code Review/Application - Facility review for code compliance. o Sustainable Design/LEED - Application of sustainable strategies Skills: Minimum of 8 years related work experience. Self-Motivated, Problem Solving, Written Communications, Driven for Results, Quality Focused, Strong Listening Skills. Intermediate knowledge of engineering design principles and the following applicable design guides and standards related to HVAC, and plumbing system design. Including a basic knowledge of the following: International Codes Council (ICC) Suite of Codes ASHRAE Handbooks / Standards ASPE design handbooks SMACNA Standards NFPA standards Computer generated HVAC Heatloads, energy modeling and HVAC equipment sizing Technical Submittal reviewing process Bid reviewing process Microsoft Office Suite Bluebeam Revu Revit 3D Modeling...EXCEL ... (HVAC CALC SOFTWARE) Chvac - Commercial HVAC Load Software Experience with large-scale water-cooled chillers is preferred. Requires a bachelor's degree in engineering from either a recognized accredited program in their home country or the country in which the professional is practicing $55-&70/hr.

The Systems Engineer is responsible for maintaining cloud and on-premises applications, servers, storage, and network equipment. The position reports to the Director of IT and will be expected to plan, install, configure, and manage all aspects of IT infrastructure to ensure reliable, secure, and cost-effective delivery of services. Essential Duties and Responsibilities include the following. Other duties may be assigned: Respond to service tickets in a timely and professional manner. Build, configure, and support computers, servers, mobile devices, printers, and related peripherals. Install, support, and upgrade software applications deployed to computers, servers, and mobile devices. Help identify and resolve all hardware and software technical problems that impact production services. Keep affected users informed as to the status of the problem until resolution. May require after-hours or weekend work. Create documentation and knowledgebase articles for team members to aid in cross-training and consistency in work efforts. Keep documentation up to date. Participate in group discussions related to resolving common issues and escalate/collaborate with IT staff in other areas as necessary. Provide end-user training on proper techniques and procedures to effectively complete their work as it relates to information technology. Work with external vendors to resolve hardware and software issues. Qualifications: Experience with: Cloud computing environments such as AWS, Azure, GCP, or Oracle. Hypervisors like VMware vSphere, Microsoft Hyper-V, or Proxmox. Switching and routing vendors like Cisco, HPE/Aruba, or Juniper. MDM solutions such as Intune, Jamf, or Iru (Kandji). Configuration of Identity and Access Management platforms like Entra or Okta. Knowledge of monitoring solutions like PRTG, Nagios XI, or Prometheus. Experience in an agile environment and working with tools like Jira, Basecamp, or Trello. Education and/or Experience: B.S. in Computer Information Systems, or related field. 8-10 years' experience in IT systems administration or systems engineering roles. Certifications in Cisco, VMware, AWS, Azure, Jamf or others a plus. Strong hardware and software troubleshooting skills.

The IAPP is seeking a Solutions Engineer to drive technical innovation and strategic development within our Technology team. This pivotal role will focus on leading the development of system, technical, and product standards that align with our long-term business strategies. Essential Duties and Responsibilities Advance projects in Cloud and DevOps. Develop innovative, pragmatic solutions to intricate technical challenges by leveraging comprehensive analysis, strategic thinking, and adaptive problem-solving. Support new product launches and technology stack modernization. Collaborate across teams to define technical requirements and design resilient solutions. Maintain a holistic approach to technology architecture and vendor relationships. Guide and collaborate with software engineering teams. Design adaptable product and system architectures. Foster efficiency and technological advancement. Additional Duties Additional duties as assigned. Minimum Qualifications Education and/or Experience 7+ years of software engineering experience. Proven expertise in: Agile methodologies. DevOps practices. Modern technology frameworks. Business operations and global technology trends. Proficiency in: Client-side and server-side JavaScript frameworks. NoSQL databases. Microservices and API integration. Deep understanding of: Code review processes. Layered solution design. Security protocols (access control, authentication). Secure software development lifecycle (SDLC). Cloud-scale data ingestion. Exceptional communication and interpersonal abilities. Strong negotiation and consensus-building skills. Design thinking approach. Test-driven development mindset. Adaptability in dynamic environments. Collaborative spirit. Work Environment At the IAPP, we value in-person connections fueled by fun, excellence, and communication. To align with this value, we have a hybrid work environment that allows for two remote days and three days in our Portsmouth, NH office. About the IAPP The IAPP is the largest and most comprehensive global information privacy community and resource. Founded in 2000, the IAPP is a not-for-profit organization that helps define, promote and improve the privacy profession. More information about the IAPP is available at iapp.org. What We Offer Working at the IAPP is an opportunity like no other. In addition to a competitive compensation package including base salary, bonus and a full range of benefits, the IAPP offers a creative, supportive and flexible environment. Other perks include casual dress, a dog-friendly office, summer hours, and sabbaticals after seven years of service. We work in a “get-stuff-done” culture that values respect, personal and professional growth, and an entrepreneurial attitude. We have been named to Business NH Magazine 's Hall of Fame for “Best Small Companies to Work for in NH.” Want to be part of our dynamic and rapidly growing organization? View more information about all of our open positions on our website: iapp.org/careers.

To be eligible to enlist in the U.S. Navy, candidates must be between the ages of 18-34 The most powerful energy sources in the world need the most powerful minds behind them. As a Nuclear Reactors Engineer, youll be responsible for researching, designing, maintaining, operating and regulating the nuclear reactors and power plants that drive the most advanced fleet of submarines and aircraft carriers on Earth. Here, you can fuel a passion for problem-solving by defining and redefining the cutting edge of nuclear propulsion, while setting the standard in nuclear reactor research and regulation. RESPONSIBILITIES Naval Reactors Engineers have oversight of the Navy's entire fleet of nuclear-powered ships as well as shore-based prototypes and nuclear propulsion support facilities for Americas Navy. The wide array of technical areas involved in the Naval Nuclear Propulsion program include: Reactor and fluid systems design Reactor physics Materials development Component design such as steam generators, pumps and valves Instrumentation and control of reactor, steam and electric plants Testing and quality control Shielding Chemistry and radiological controls As a Navy Reactors Engineer stationed at Naval Reactors Headquarters in Washington, D.C., you will provide technical oversight while managing projects ranging from reactor design to fleet operations to de-fueling and decommissioning warships. PAY AND BENEFITS From the day you start, youll receive: Competitive salary Free health insurance Free housing A retirement plan 30 days paid vacation per year EDUCATION OPPORTUNITIES In addition to the best-in-class training and state-of-the-art facilities, current undergrad students who meet the prerequisite background will also get the chance to get paid while finishing school through the Nuclear Propulsion Officer Candidate (NUPOC) program. Students in majors like mathematics, engineering, physics and chemistry may receive preferred acceptance into the program. If accepted into the NUPOC program as an aspiring Naval Reactors Engineer, you can: Receive a salary in excess of $4,000 per month for up to 18 months prior to your college graduation Receive an immediate one-time sign-on bonus of $15,000 Enjoy military health care benefits while you are a student in the program Postgraduate Education Opportunities As a Naval Reactors Engineer, once youre out of school youll have a position waiting as a respected professional and Officer affiliated with the most accomplished nuclear program on earth. Beyond undergraduate and formal Navy training and education, you can pursue additional graduate education through the following: Post-9/11 GI Bill Navy Tuition Assistance Program Completing Joint Professional Military Education (JPME) at one of the various service colleges Using Tuition Assistance to attend online or in-person graduate programs during shore assignments. Navy College Program VOLED Assistance Center VOLED Region Advisors The Naval Postgraduate School (NPS) Navy War College (NWC) USAF Air University Air Command and Staff College QUALIFICATIONS AND REQUIREMENTS U.S. citizen between the ages of 19 and 29. Exceptions may be possible up to age 40. Graduate or current student pursuing a B.A., B.S. or M.S. (preferably major in mathematics, engineering, physics, chemistry or other technical areas). Those still in school may apply as early as 18 months from completion of an undergraduate degree for Naval Reactors Engineers. Applicants may also join the NUPOC program as early as 12 months from completion of a master's degree. Additional academic requirements include: Completed one academic year of calculus Completed one academic year of calculus-based physics A competitive GPA and a minimum grade of "B" in all technical courses General qualifications may vary depending upon whether youre currently serving, whether youve served before or whether youve never served before. WORK ENVIRONMENT Preliminary training and eventual staff assignments center around Naval Reactors Headquarters at the Navy Yard in Washington, D.C. At Headquarters, you will be a part of an elite, streamlined staff of roughly 500 people who oversee the entire Naval Nuclear Propulsion Program from cradle to grave. Even junior-level Naval Reactors Engineers assume responsibility for key technical work in a variety of state-of-the-art facilities, including: Two Department of Energy laboratories Two nuclear prototype/training sites Nearly 100 nuclear-powered ships and submarines Six shipyards More than 1,000 firms that support the Naval Reactors Program RequiredPreferredJob Industries Government & Military

SIG SAUER, Inc. is a leading provider and manufacturer of firearms, electro-optics, ammunition, airguns, suppressors, remote controlled weapons stations, and training. For over 250 years SIG SAUER, Inc. has evolved, and thrived, by blending American ingenuity, German engineering, and Swiss precision. Today, SIG SAUER is synonymous with industry-leading quality and innovation which has made it the brand of choice amongst the U.S. Military, the global defense community, law enforcement, competitive shooters, hunters, and responsible citizens. Additionally, SIG SAUER is the premier provider of elite firearms instruction and tactical training at the SIG SAUER Academy. Headquartered in Newington, New Hampshire, SIG SAUER has over 3,400 employees across sixteen U.S. locations in three states, and four additional global facilities. SIG SAUER is certified a Great Place to Work™. For more information about the company and product line visit: www.sigsauer.com Position Summary: The Manufacturing Engineer II, Finishing will be responsible for developing, implementing, and improving a variety of finishing processes at SIG SAUER's firearm facilities. Emphasis will be placed on vibratory, media, robotic abrasive sanding, laser ablating of precision CNC machined components, and machining and assembly of precision firearm components utilizing clearly defined technical drawings and interchangeable parts. In addition, this position will require execution of manufacturing feasibility, quality planning, and corrective action for internal quality concerns. FLSA: Exempt Job Duties and Responsibilities: Plan, design, and implement manufacturing processes for new and existing firearm product designs while providing budgetary estimates for equipment, tools, gages, and production rate. Use project management techniques to procure tooling and equipment for new products to meet launch timelines and cost targets. Identify areas for improvement and conduct formal cost savings analysis using established procedures. Determine problem resolutions and implement improvements to quality and throughput. Evaluate and improve product designs for manufacturability while applying GD&T and dimensional stack-ups. Provide production floor support to maintain output and quality for technical systems and manufacturing processes including: High volume CNC machining Machine and Tool Design Mass Finishing Systems Automation Laser Engraving Originate and develop new systems and processes and implement into full production. Debug and runoff new capital equipment to meet plant goals for quality, throughput, and cost. Execute turnkey runoffs per SIG SAUER machine specification requirements. Generate new machine specifications with the guidance of Engineering Lead or Supervisor. Resolve and prevent quality issues related to assigned product, processes, and NPI components using statistical methods. Apply gage R&R, bias, dimensional stack-ups, control plan methodology, GD&T, and enroll in a certification program for Shainin Red X and/or Six Sigma. Perform as technical leader for production personnel including setters, operators, and technicians. Recommend and implement technological alterations and enhancements to improve quality of products, procedures, and the output and quality of manufacturing processes. Maintain research, activity documentation, and prepare reports. Provide consultation on problem solving teams and complete assigned tasks per agreed upon timelines. Participate in 5S Workplace organizational activities and maintain the area in good working order through sustainment activities. Miscellaneous duties as assigned. Education/Experience & Skills: Bachelor's degree in Mechanical or Manufacturing Engineering and at least 3-6 years of previous experience. Knowledge of Geometric Dimensioning and Tolerancing (GD&T) ASME Y14.5M-2009. Must be proficient in using Microsoft Excel, Word, and PowerPoint as well as SOLIDWORKS. Possess a basic working knowledge of monday.com and have experience in using data analysis programs. Must be able to demonstrate expertise in a variety of the field's concepts, practices, and procedures. Good working knowledge of materials and metal finishing processes. Ability to plan and execute multiple projects. Must be able to work independently and as part of a team. Quality of work must be very high. Must be able to clearly, concisely, and accurately convey ideas and information to others, both verbally and in written form. Organization of documentation and record keeping shall be to a high standard. Working Conditions: Prolonged periods of sitting at a desk and working at a computer using a keyboard and mouse performing repetitive tasks. Ability to open file cabinets, reach with hands and arms, bend, and twist, lift and move files. Ability to lift up to 25 pounds. Must wear required Personal Protective Equipment (PPE) where required. Must comply with all work exposure EH&S training requirements and adhere to SIG SAUER Inc. Security Mandates. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status or other characteristics protected by law.

System Engineer III Location: On-site, Portsmouth, NH. Relocation assistance is available for eligible candidates and their families, if needed. The Systems Engineer will support ongoing Lonza operations through technical assistance as it relates to computerized systems infrastructure for process automation and QC laboratory systems. This person provides a technical resource to operations customers to ensure that systems are designed and operating to meet production needs. What you will get: An agile career and dynamic working culture. An inclusive and ethical workplace. Competitive salary and performance-based bonuses 401(k) matching plan. Competitive compensation programs that reward high performance. Comprehensive medical, dental, and vision insurance. Access to our full list of global benefits: ************************************** What you will do: Provide infrastructure support (servers, networks, workstations, storage, and client devices) for Automation, Business Analytics, Quality Control, and any other information systems used to support Operations. Maintain system integrity and identify performance and security improvements. Investigate and troubleshoot technical problems of increasing complexity. Authoring of commissioning protocols (installation, operation, etc.). Execute test scripts (design , execution, simulation, etc.) with support and guidance from supervisor. Own change requests and participate in all aspects of the change control system. Participate in RCAs as Operations Information Systems (OIS) representative. Review/revise OIS and Manufacturing related , SOP's, Functional Specifications, and work instructions, as a result of CAPA, equipment/process changes, error prevention activities, etc. What we are looking for: Bachelor's of Science or Equivalent Experience (Computer Science, IT or Engineering Discipline Preferred). 5-10+ years of experience with application of IT principles in high availability production and laboratory systems. Biotech/pharma experience preferred. Experienced with using and troubleshooting Syncade. Experienced in developing documentation for networks and information systems, including interface design, data conversion, and infrastructure fundamentals. Proficient with Unix, Windows, and Linux operating systems, as well as Cisco network switching and monitoring utilities. Skilled in SQL Server (2005/2022) and OSIsoft PI Systems, with additional knowledge of VBScript, .NET, and SQL programming. Experienced with deployment and recovery applications, including Symantec Ghost, Acronis, Backup Exec, and Veeam. About Lonza At Lonza, our people are our greatest strength. With 30+ sites across five continents, our globally connected teams work together every day to manufacture the medicines of tomorrow. Our core values of Collaboration, Accountability, Excellence, Passion and Integrity reflect who we are and how we work together. Everyone's ideas, big or small, have the potential to improve millions of lives, and that's the kind of work we want you to be part of. Innovation thrives when people from all backgrounds bring their unique perspectives to the table. At Lonza, we offer equal employment opportunities to all qualified applicants regardless of race, religion, color, national origin, sex, sexual orientation, gender identity, age, disability, veteran status, or any other characteristic protected by law. If you're ready to help turn our customers' breakthrough ideas into viable therapies, we look forward to welcoming you on board. Ready to shape the future of life sciences? Apply now.

Cloud Systems EngineerJob Description FirstLight is a premier Telecom and Cloud Provider delivering advanced technology solutions and data center services throughout the Northeast. We are expanding our Engineering team and seeking technology professionals with 5+ years of experience supporting critical IT infrastructure and customers. The ideal candidate will join a tight-knit, customer-focused, highly collaborative engineering team that emphasizes knowledge sharing, skill development, and technical excellence. Primary Responsibilities • Support new and existing VMware, Microsoft, and Linux environments, with a strong focus on Linux • Troubleshoot and resolve Tier 2 escalations related to VMware, Microsoft, and Linux storage environments • Maintain, optimize, and troubleshoot OS performance issues while adhering to best practices • Manage user accounts, PAM, sudo policies, LDAP/IdM, and SAML integrations • Handle package management and repository mirroring • Recommend technology upgrades and improvements using industry best practices • Troubleshoot systemd, journald, and related service issues • Tune kernel parameters (sysctl, hugepages, network buffers) • Create and maintain high-quality documentation • Contribute to excellent customer service, communication, and process adherence • Support our BraaS, DRaaS, and IaaS offerings Required Technology Skills Minimum 5+ years of hands-on experience architecting, implementing, and supporting mixed Microsoft and Linus environments including: • Hands-on experience with hypervisors such as VMware ESXi 7/8, KVM/QEMU, Proxmox, or Xen-preferably in a multi-tenant cloud environment • Virtualization & multi-tenant isolation (resource pools, clusters, quotas, cgroups, namespaces) • Storage policy design & enforcement-IOPS limits, thin/thick provisioning, snapshots • Microsoft Server and Active Directory • Clustering, replication, and high-availability technologies • High-performance storage (block, Ceph, object, SAN) • Working knowledge of PowerShell, Bash, Ansible, CI/CD basics, JSON/YAML • Application firewalls and load balancers • IP networking fundamentals: VLANs, VXLAN, subnetting, routing protocols • MSSQL environments • Cluster lifecycle management: upgrades, node pools, autoscaling • Disaster recovery including on-platform backups (Veeam, Zerto, snapshots) and offsite replication • Knowledge of security, governance, and compliance concepts • Ability to execute complex projects independently and as part of a team Required Executive Functioning & Soft Skills • Strong attention to detail and excellent organizational abilities • Clear written and verbal communication skills • Independent self-starter able to deliver with minimal supervision • Reliable, collaborative team member who values documentation and mentoring • Strong desire to continuously learn and apply new technologies • Ability to distinguish “provider responsibility” from “tenant responsibility” • Commitment to delivering excellent customer service Preferred Certifications & Education • VMware VCP • CompTIA Linux+ • Red Hat (RHCSA/RHCE) • Microsoft, Azure, AWS, or GCP certifications (preferred but not required) • BA/BS in a relevant field (preferred but not required) About FirstLight: FirstLight, headquartered in Albany, New York, provides fiber-optic data, Internet, data center, cloud and voice services to enterprise and carrier customers throughout the Northeast connecting more than 13,000 locations in service with more than 125,000 locations serviceable by our more than 25,000-route mile network. FirstLight offers a robust suite of advanced telecommunications products featuring a comprehensive portfolio of high bandwidth connectivity solutions including Ethernet, wavelength, and dark fiber services as well as dedicated Internet access solutions, data center, cloud and voice services. FirstLight's clientele includes national cellular providers and wireline carriers and many leading enterprises, spanning high tech manufacturing and research, hospitals and healthcare, banking and financial, secondary education, colleges and universities, and local and state governments. FirstLight Fiber is an equal opportunity employer. In accordance with state and federal laws, FirstLight's equal opportunity policy is that all applicants and employees are treated equally by the company with respect to employment opportunities, regardless of race, color, religion, sex, sexual orientation, disability, or veteran status or veteran disability.

System Engineer III Location: On-site, Portsmouth, NH. Relocation assistance is available for eligible candidates and their families, if needed. The Systems Engineer will support ongoing Lonza operations through technical assistance as it relates to computerized systems infrastructure for process automation and QC laboratory systems. This person provides a technical resource to operations customers to ensure that systems are designed and operating to meet production needs. What you will get: * An agile career and dynamic working culture. * An inclusive and ethical workplace. * Competitive salary and performance-based bonuses * 401(k) matching plan. * Competitive compensation programs that reward high performance. * Comprehensive medical, dental, and vision insurance. Access to our full list of global benefits: ************************************** What you will do: * Provide infrastructure support (servers, networks, workstations, storage, and client devices) for Automation, Business Analytics, Quality Control, and any other information systems used to support Operations. * Maintain system integrity and identify performance and security improvements. * Investigate and troubleshoot technical problems of increasing complexity. * Authoring of commissioning protocols (installation, operation, etc.). * Execute test scripts (design , execution, simulation, etc.) with support and guidance from supervisor. * Own change requests and participate in all aspects of the change control system. * Participate in RCAs as Operations Information Systems (OIS) representative. * Review/revise OIS and Manufacturing related , SOP's, Functional Specifications, and work instructions, as a result of CAPA, equipment/process changes, error prevention activities, etc. What we are looking for: * Bachelor's of Science or Equivalent Experience (Computer Science, IT or Engineering Discipline Preferred). * 5-10+ years of experience with application of IT principles in high availability production and laboratory systems. Biotech/pharma experience preferred. * Experienced with using and troubleshooting Syncade. * Experienced in developing documentation for networks and information systems, including interface design, data conversion, and infrastructure fundamentals. * Proficient with Unix, Windows, and Linux operating systems, as well as Cisco network switching and monitoring utilities. * Skilled in SQL Server (2005/2022) and OSIsoft PI Systems, with additional knowledge of VBScript, .NET, and SQL programming. * Experienced with deployment and recovery applications, including Symantec Ghost, Acronis, Backup Exec, and Veeam. About Lonza At Lonza, our people are our greatest strength. With 30+ sites across five continents, our globally connected teams work together every day to manufacture the medicines of tomorrow. Our core values of Collaboration, Accountability, Excellence, Passion and Integrity reflect who we are and how we work together. Everyone's ideas, big or small, have the potential to improve millions of lives, and that's the kind of work we want you to be part of. Innovation thrives when people from all backgrounds bring their unique perspectives to the table. At Lonza, we offer equal employment opportunities to all qualified applicants regardless of race, religion, color, national origin, sex, sexual orientation, gender identity, age, disability, veteran status, or any other characteristic protected by law. If you're ready to help turn our customers' breakthrough ideas into viable therapies, we look forward to welcoming you on board. Ready to shape the future of life sciences? Apply now.

The CSV Engineer will, as an individual contributor, identify and implement industry best practices through an extensive industry network and detailed knowledge of applicable regulations. During the scoping portion of these improvement projects the person in this role will work with other experienced members of the CSV team to identify roadblocks and additional efficiencies. Additional day to day tasks will include risk assessing systems, reviewing change requests and test scripts, drafting protocols and initiating and reviewing GMP documentation revisions. Execute all responsibilities as the CSV owner for significant site and process improvement projects, to ensure compliance to appropriate regulatory requirements and industry standards while maximizing efficiency. Perform all aspects of QMS process Change Control (particularly associated with DCS ( DeltaV) and MES ( Syncade) systems, Deviations, CAPAs. Perform other duties as assigned. Key requirements include: 1) Substantial experience in in equipment and/or computer validations. Must have Working experience with Controls Automation, Process Control Systems, Distributed Systems, Manufacturing Execution Systems (MES) required, DeltaV preferred. 2) Prior experience leading projects in a Biotech/Pharma or biologics industry. 3) Strong attention to detail and ability to work independently and meet deadlines successfully.