Engineer jobs in Huntsville, TX

Job Description The Test Engineer is responsible for developing, executing, and improving test processes for test equipment used to control measure and control the quality of Solar Modules in a high volume fully automated solar manufacturing line. The Test Engineer works closely with engineering, production, quality, and maintenance teams to continually improve the product and test equipment, that ultimately drives the overall quality and performance of the product. Key Responsibilities Develop, implement, and maintain test procedures, protocols, and documentation for solar module manufacturing testing equipment that ensures accurate and thorough evaluation of the product performance to company and industry standards. Conduct functional, performance, reliability, and validation testing with manual and automated systems on solar products in a high-volume manufacturing environment. Troubleshoot product and test equipment failures, identify root causes, and implement corrective actions in collaboration with cross functional teams. Define and drive control plans, FMEAs and OCAPs for the various test equipment and processes to ensure zero factory escapes of non-conforming products Analyze test data to identify trends, risks, and improvement opportunities. Ensure test equipment control plans are clearly defined with proper calibration, monitoring, SPC, standards and other tools and processes. Support new equipment installation (IQ/OQ/PQ) and validation for robotic and automated production lines. Optimize test stations, fixtures, and instrumentation to improve accuracy, throughput, and reliability. Ensure proper tools/hardware, processes and training in place to allow for safe operation of all test equipment Work with engineering teams to define test requirements for new processes, materials or product changes. Perform debugging on robotic systems, sensors, PLCs, vision systems, and electrical control panels. Coordinate with equipment manufacturers during equipment acceptance testing (FAT/SAT). Ensure compliance with industry standards, safety requirements, and internal quality systems. Maintain test records, calibration logs, and equipment documentation. Provide technical training and guidance to technicians, engineers and operators on test procedures and equipment usage. Qualifications Required: Bachelor's degree in electrical engineering, Mechanical Engineering, Mechatronics, Robotics, or a related Engineering/physical science field. Minimum of 3 years of experience as a Test Engineer in robotics, automation, solar manufacturing, semiconductor, or comparable high tech manufacturing environments Strong troubleshooting and root cause analysis skills for electrical, mechanical, and software related failures. Experience developing and executing test procedures, data capture, and analysis. Proficiency with test and measurement. Knowledge of manufacturing processes, quality standards, and equipment validation. Ability to read engineering drawings, schematics, and technical documentation. Preferred: Experience in solar module manufacturing or related energy/semiconductor industries. Familiarity with MES/ERP systems and data collection tools. Working knowledge of programming or scripting for automation or data analysis (Python, LabVIEW, PLC logic, etc.). Experience with DOE, FMEA, SPC, and other engineering best practices. Strong analytical and problem-solving ability Understanding of automated manufacturing and robotics Detail oriented with excellent documentation skills Effective communication and Cross functional collaboration Ability to manage multiple tasks and priorities Continuous improvement mindset Key Competencies Work Environment Onsite role in a fast paced solar manufacturing facility with advanced robotics. Occasional offsite travel for supplier evaluations, equipment testing, or training. We offer a competitive salary, robust benefits, paid time off and growth opportunities.

About Us: PurgeRite, the leader in high-quality mechanical flushing services, is seeking highly motivated and experienced engineers. We serve all sizes of commercial mechanical companies across the U.S. with end user clients that include many top Fortune 100 companies. Projects include data centers, semiconductor and EV battery manufacturers, universities, health care facilities, and district energy systems. We are a first-mover company seeking an individual that works with a sense of urgency, provides excellent customer service, and can independently drive multiple projects. This position will design engineered solutions for commissioning or remediating customer projects. This individual should seek to grow their technical and project engineering capabilities while promoting our organization's goals and values. Our team has an entrepreneurial spirit and is results driven. Position Overview: Our customers choose PurgeRite because of our unique ability to deliver turn-key flushing solutions for some of the most complex hydronic systems being deployed today. This key position is responsible for engineering solutions unique to each customer's system after acquiring a deep understanding of their system design, their flushing and chemical treatment requirements, and the site infrastructure. Key Responsibilities: · Independently analyze complex hydronic systems and site considerations to devise an overall flushing strategy to meet customer needs · Visit job sites to validate assumptions, identify unique constraints, and build strong customer relationships · Communicate with multiple stakeholders such as owner representatives, general contractors, mechanical contractors, and chemical providers to achieve alignment on goals, constraints, and specifications · Perform necessary calculations, define and document detailed flush plans · Review flush plans with customers, revise as necessary based on customer feedback, and obtain final agreement. · Act as the primary technical point of contact for sales, operations, and customers · Review operational feedback from completed projects as input to continuous improvement efforts in our methods and practices. Identify and prioritize opportunities and drive those improvements Requirements Requirements: · Strong written and verbal communication skills with all stakeholders from field technicians to owner representatives· A strong sense of urgency and dedication to meeting project timelines· Proficiency in reading and interpreting construction drawings· Demonstrated ability to rapidly solve problems with practical solutions· Experience with pump sizing and related calculations such as interpreting pump curves, performing NPSH calculations, determining flow velocities in networked piping, and calculating heat gain· Bachelor's degree in Engineering or equivalent relevant combined education and work experience.Preferred Qualifications:· PE license or EIT Certification· Technical knowledge of hydronic heating and cooling systems and components· Experience developing flush plans for field implementation in commercial and industrial environments· Proficiency in performing take-offs from construction drawings· Proficiency with technical software (such as Revit/Navisworks, BlueBeam, Pipeflow, Excel, etc) to maximize engineering productivity. Position Goal: Devise and communicate flushing plans for complex hydronic systems which enable customer goals while considering operational and economic efficiencies. Company Support: The company is committed to providing the necessary resources and training to ensure this person can be successful in learning and enhancing our approach as we move forward. PurgeRite is an Equal Opportunity/Affirmative Action employer. We promote equal opportunities for all with respect to hiring, terms of employment, mobility, training, compensation, and occupational health, without discrimination as to age, race, color, religion, creed, sex, pregnancy status (including childbirth, breastfeeding, or related medical conditions), marital status, sexual orientation, gender identity / expression (including transgender status or sexual stereotypes), genetic information, citizenship status, national origin, protected veteran status, political affiliation, or disability.

About Us: PurgeRite, the leader in high-quality mechanical flushing services, is seeking highly motivated and experienced engineers. We serve all sizes of commercial mechanical companies across the U.S. with end user clients that include many top Fortune 100 companies. Projects include data centers, semiconductor and EV battery manufacturers, universities, health care facilities, and district energy systems. We are a first-mover company seeking an individual that works with a sense of urgency, provides excellent customer service, and can independently drive multiple projects. This position will design engineered solutions for commissioning or remediating customer projects. This individual should seek to grow their technical and project engineering capabilities while promoting our organization's goals and values. Our team has an entrepreneurial spirit and is results driven. Position Overview: Our customers choose PurgeRite because of our unique ability to deliver turn-key flushing solutions for some of the most complex hydronic systems being deployed today. This key position is responsible for engineering solutions unique to each customer's system after acquiring a deep understanding of their system design, their flushing and chemical treatment requirements, and the site infrastructure. Key Responsibilities: · Independently analyze complex hydronic systems and site considerations to devise an overall flushing strategy to meet customer needs · Visit job sites to validate assumptions, identify unique constraints, and build strong customer relationships · Communicate with multiple stakeholders such as owner representatives, general contractors, mechanical contractors, and chemical providers to achieve alignment on goals, constraints, and specifications · Perform necessary calculations, define and document detailed flush plans · Review flush plans with customers, revise as necessary based on customer feedback, and obtain final agreement. · Act as the primary technical point of contact for sales, operations, and customers · Review operational feedback from completed projects as input to continuous improvement efforts in our methods and practices. Identify and prioritize opportunities and drive those improvements Requirements:Requirements: · Strong written and verbal communication skills with all stakeholders from field technicians to owner representatives· A strong sense of urgency and dedication to meeting project timelines· Proficiency in reading and interpreting construction drawings· Demonstrated ability to rapidly solve problems with practical solutions· Experience with pump sizing and related calculations such as interpreting pump curves, performing NPSH calculations, determining flow velocities in networked piping, and calculating heat gain· Bachelor's degree in Engineering or equivalent relevant combined education and work experience.Preferred Qualifications:· PE license or EIT Certification· Technical knowledge of hydronic heating and cooling systems and components· Experience developing flush plans for field implementation in commercial and industrial environments· Proficiency in performing take-offs from construction drawings· Proficiency with technical software (such as Revit/Navisworks, BlueBeam, Pipeflow, Excel, etc) to maximize engineering productivity. Position Goal: Devise and communicate flushing plans for complex hydronic systems which enable customer goals while considering operational and economic efficiencies. Company Support: The company is committed to providing the necessary resources and training to ensure this person can be successful in learning and enhancing our approach as we move forward. PurgeRite is an Equal Opportunity/Affirmative Action employer. We promote equal opportunities for all with respect to hiring, terms of employment, mobility, training, compensation, and occupational health, without discrimination as to age, race, color, religion, creed, sex, pregnancy status (including childbirth, breastfeeding, or related medical conditions), marital status, sexual orientation, gender identity / expression (including transgender status or sexual stereotypes), genetic information, citizenship status, national origin, protected veteran status, political affiliation, or disability.

As the world around us becomes more connected and more digital, there are increased opportunities for fraud and disruption due to cybersecurity attacks. The need for companies, products, and services to be secure is more important than ever in this constantly changing landscape. Are you passionate about keeping good people safe from bad actors? We are too! We are HP Cybersecurity, and we are tasked with the security of the HP enterprise. As HP continues our digital transformation, the work of the cybersecurity professional is never complete and is always interesting. Come be a part of making a difference with us! **What does a Cybersecurity Threat Detection & Response Engineer do at HP:** + Uses knowledge of the HP environment to scope the extent and impact of any attack or breach. + Resolves HP security issues related to security incidents and threats through independent analysis and/or research. + Supports incident escalation and assesses probable damages, identifies damage control and remediation, and assists in developing courses of action. + Threat hunts the HP environment for known or emerging Tactics, Techniques, or Procedures (TTPs). + Identifies HP security system attacks and threats, runs analyses on security incidents and threats, and researches appropriate countermeasures. Able to contribute to the posture or enhancement of counter-threat programs. **Individuals who thrive in this role at HP, typically have:** + 6+ years of relevant experience including security operations, incident response, or threat hunting. + Experience in developing threat-hunting hypotheses; leveraging security platforms to test, search, and investigate potential uncovered threats. + Familiarity with Security Analytics Platforms and Endpoint Detection & Response (EDR) Platforms + Knowledge and experience of common enterprise technology solutions + Strong understanding of digital forensics, including one or more of the following a strong plus: + _File system, Registry, etc. artifacts commonly associated with malware or malicious activities._ + _Cloud Forensics_ + _Memory analysis_ + _Malware reverse engineering_ + A mindset of continuous growth, curiosity, and asking WHY? + Preferred: Technical Cyber Security Certification through one of the recognized bodies - e.g. SANS, ISACA, (ICS)2, CompTIA, Cisco, CERT. + Periodic weekend on-call required **About the team:** Our Threat Detection & Response Engineers are part of our Threat Detection & Response team, enabling optimal communication and collaboration with closely related functions. Our mission is simple to express - find and stop the Bad Guys! - but challenging to execute. You can become a key part of ensuring our success! As a Threat Detection & Response Engineer, you will also have the opportunity to interface with other Cybersecurity functions using your knowledge to respond to protect HP from attacks. The base pay range for this role is $105,050 to $161,800 annually with additional opportunities for pay in the form of bonus and/or equity (applies to US candidates only). Pay varies by work location, job-related knowledge, skills, and experience. **Benefits:** HP offers a comprehensive benefits package for this position, including: + Health insurance + Dental insurance + Vision insurance + Long term/short term disability insurance + Employee assistance program + Flexible spending account + Life insurance + Generous time off policies, including: + 4-12 weeks fully paid parental leave based on tenure + 11 paid holidays + Additional flexible paid vacation and sick leave (US benefits overview (***************************************************************** ) The compensation and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Titan Production Equipment was founded in 2018. As a 100% production equipment-focused company, Titan provides a high level of service, quality and capabilities to fulfill customers' equipment needs around the separation, processing and treating of oil and gas hydrocarbon streams. Titan offers deep engineering expertise and has capacity to manufacture at high volumes in an ASME-certified facility that produces both pre-designed and custom separators, heater treaters, glycol dehydration units, as well as a wide range of other production equipment products. Position: Project Engineer Provides required information to designers, project managers and customer management during all phases of equipment fabrication from proposal to operation of the equipment. Central responsibility is assisting in the development of a safe and cost effective design for manufacturing that meets the customer's requirements. Works under limited supervision. Job Description: Performs research and analyses of data such as application engineering proposal, design specifications, drawings, industry codes and equipment manuals to determine feasibility of design or application of equipment Complies with Titan Production Equipment Standards Performs engineering calculations to size vessels, piping, valves and auxiliary systems to ensure products and systems conform to engineering design and customer specifications Ensures project-engineering work is completed accurately and on schedule Development of bills of material and shop notes meeting the customer's requirements and the specific requirements of the order in compliance with accepted practices and applicable industry codes Coordinates with designers to develop general arrangement and assembly drawings for other departments and the customer. Works with the shop to meet their assembly and shipping requirements for each unit Provides regular updates of engineering status, drawings, BOMs Assists in troubleshooting customer issues May occasionally travel to customer locations under the supervision of a Senior Engineer Attend technical training as required by the job Participation on special projects as assigned Perform shop walks to ensure production meets design requirements during fabrication Works on packages with moderate to high level of complexity using sweet or sour gas, customer specification and are of a high profile nature Interface with 3rd party inspection firms Preferred Education and Relevant Experience/Training: Bachelor's degree from a four-year college or university, preferably in Mechanical Engineering or related field Five to eight years related experience and/or training Technical Knowledge and Skills Experience with packaging design, skid design, ASME - section 8 pressure vessel design (ASME Pressure Vessel Code, Div. 1, ANSI B31.3, B31.8, B31.4, API 1104, AISC D1.1 et.al.) Knowledge of piping and pipe schedules, flanges and fittings Experience with pipe stress analysis Understanding of acoustical theory and torsional vibration analysis Physical Strain: Must be able to work in a fast paced environment under pressure

Job DescriptionDescription: Arena Offshore is a leader in offshore energy production, dedicated to operational excellence, safety, and environmental responsibility. Our collaborative and innovative team drives impactful projects that power the future. Join us to advance your career in a dynamic, safety-first environment with opportunities for growth and professional development. Position Overview The Facilities Engineer provides engineering and technical expertise to support Arena Offshore's assets, including maintenance, optimization, and capital projects for offshore production facilities. This role ensures compliance with industry regulations, Arena Offshore's safety and quality standards, and project management objectives while driving operational efficiency. Key Responsibilities: · Asset Maintenance and Optimization: o Oversee repair and maintenance of production equipment, utility systems, and support infrastructure on offshore assets. o Evaluate facility infrastructure to identify and implement operational efficiency improvements. · Capital Project Execution: o Lead engineering design and execution for capital projects, from restorations to new builds. o Develop accurate cost estimates, Authorizations for Expenditure (AFEs), and project schedules. o Conduct site surveys and collect data to establish precise design bases. · Safety and Compliance: o Ensure compliance with regulations (e.g., 30CFR 250, API RP14C) and Arena Offshore's safety, quality, and technical standards. o Support contractor health, environmental, and safety (HES) management to meet company objectives. o Define and implement process safety standards to reduce incident risks. o Lead facility hazard analyses and ensure action item closeout. · Project Management: o Collaborate with leadership to prioritize construction scopes and allocate resources effectively. o Support business planning and work schedules to align projects with company goals. o Maintain accurate compliance documentation, including P&IDs, Safety Flow Diagrams, Equipment Layouts, and SAFE Charts. · Technical Oversight: o Supervise offshore construction activities, ensuring alignment with project performance requirements. o Provide technical guidance to contractors during project execution. Requirements: Education and Experience · Bachelor's degree in Mechanical, Chemical, Civil, or related engineering discipline. · Minimum of 10 years' experience in offshore production facilities, or equivalent experience in upstream oil and gas operations with transferable skills. Qualifications and Skills · Technical Expertise: o Proven experience in construction, installation, and/or commissioning in the upstream sector. o Strong knowledge of facilities engineering design and construction for offshore structures, topsides equipment, utilities, and injection systems. o Familiarity with 30CFR 250, API RP14C, and other industry standards and codes. o Proficiency in Microsoft Office and engineering/project management tools (e.g., AutoCAD, Primavera). · Project Management: o Demonstrated ability to manage complex, concurrent projects with multiple stakeholders. o Strong organizational skills to prioritize a diverse workload and meet deadlines. · Communication and Leadership: o Excellent communication skills for leading project meetings, collaborating with cross-functional teams (e.g., HSE, Regulatory, Production), and engaging with clients. o Ability to solve problems proactively and handle ethical situations with integrity. · Adaptability: o Willingness to work a flexible schedule, including monitoring offshore operations on weekends and holidays. o Commitment to continuous self-development and recognizing personal strengths and weaknesses. Certificates and Licenses · Professional Engineer (PE) license or equivalent from a recognized licensing board is preferred. · Relevant certifications (e.g., PMP, safety certifications) are a plus. Physical Requirements · Ability to sit for extended periods and use arms/hands for repetitive tasks, with occasional standing and walking. · Capability to lift up to 50 lbs and navigate offshore oil rigs (e.g., stairs, ladders). · Willingness to travel without limitation via airplanes, helicopters, and boats, including swing ropes and personnel baskets. · Ability to work in extreme weather conditions and hazardous atmospheres, with appropriate safety training and equipment provided.

Cyclyx International, LLC ("Cyclyx") is a pioneer in the plastic value chain, leveraging our proprietary technology to convert post-use plastic waste into high-quality feedstock for recycling. We provide customized solutions for brands and companies aiming to achieve their recycled content goals, actively supporting the development of a circular economy. Our state-of-the-art Circularity Center, currently under construction in Houston, TX, will be the first large scale facility in the United States, designed to process a diverse range of post-consumer, commercial, and industrial plastic waste. This innovative center will have the capacity to produce 300 million pounds of custom-formulated feedstock per year and convert it into ISCC-PLUS-certified feedstock suitable for mechanical and advanced recycling applications. We are dedicated to operating safely and improving the recyclability of all plastics. Our customers are at the core of our mission, and we strive to exceed their expectations by understanding their unique needs and delivering exceptional value. We uphold the highest standards of accountability and integrity in all our operations. We are committed to fostering a diverse, inclusive work environment where every voice is valued. Our open-door policy encourages employee engagement and feedback, promoting continuous improvement through collaboration and transparency. At Cyclyx, we believe that working together can drive meaningful change in the recycling landscape. Role Overview The Infrastructure Systems Engineer is responsible for supporting, maintaining, and optimizing the organization's server and network infrastructure environments. A successful candidate will provide hands-on technical assistance across hardware and software platforms, ensuring systems remain reliable, secure, and efficient. They will monitor system performance, troubleshoot technical issues, and proactively address vulnerabilities to maintain operational integrity. This role requires strong problem-solving skills and a collaborative approach. The engineer will work closely with the Cyclyx Technology team, supporting daily operations and implementing solutions that meet the business's practical needs. The candidate should be adept at maintaining and updating existing infrastructure, documenting processes and configurations, and responding to evolving security requirements. Previous experience in a manufacturing environment is essential, particularly with ERP, SCADA, Business Intelligence, and warehousing systems. Familiarity with managing and supporting these platforms will enable the engineer to respond quickly to technical challenges and ensure critical systems stay available and up-to-date. Key Responsibilities Focus on deploying, maintaining, and updating infrastructure to ensure optimal performance and security. Create and maintain clear documentation-including reference architectures, design specifications, and rationale-to support the team's understanding of infrastructure decisions. Proactively recommend technology solutions that align with current business goals. Identify and address security risks, executing effective mitigation strategies. Specify hardware and software requirements for all systems, and pursue automation and process improvements to enhance both IT and business operations. Qualifications Candidates should have proven experience as a Server or Network Engineer within heavy industry or manufacturing environments. Expertise in virtualized server infrastructures is essential, including platforms such as VMware, KVM, XCP-ng, and Citrix. A strong background in managing Layer 2 and Layer 3 multi-site networks-especially with technologies like Cisco and PicOS-is required. Experience in managing CCTV and access control systems, particularly with Axis, Ubiquiti, and HikVision platforms. Proficiency in supporting Azure cloud infrastructure, including Windows Server and AD/Entra administration, is important. Additional experience with M365 services (such as Office, Exchange and Teams) administration is highly valued. Candidates should be comfortable working in Linux environments (particularly Ubuntu) and managing both servers and desktops. Familiarity with containerized infrastructure, including Docker, Kubernetes, and LXD, is expected. Finally, applicants should have a track record of deploying and managing cybersecurity solutions in industrial and business settings, with experience using Fortinet products such as FortiGate, FortiAnalyser, and FortiSRA. Education Bachelor's degree in computer science, engineering, or extensive industry experience. LICENSE OR CERTIFICATE Candidates are encouraged to possess recognized IT certifications in networking or server technologies from reputable organizations such as Microsoft, VMware, Cisco, or Fortinet. Position Mechanics Reports to: Senior Director, Technology Systems Type: Exempt; Full-time Work Hours: Flexible, but must be available, 8:00-5:00, Monday to Friday with occasional evening and weekend work. Location: Houston, TX Work environment: Primarily an office environment, but may also work in an industrial environment at times where the use of PPE is required. Travel: Minimal - Less than 10%. Physical Demand is substantially that of an office environment. Occasional lifting and manual work. Must be legally authorized to work in the U.S. without sponsorship for employment visa status. Company Benefits Cyclyx offers a competitive benefits package which goes beyond just a paycheck. Our comprehensive benefits package includes competitive, company funded (up to 90% company-paid premiums) health, dental, vision and insurance plans to robust retirement benefits that include company-matching contributions, and much, much more. We also provide development and growth opportunities because we believe investing in your success is investing in our success. Also, working for a rapidly growing, fast-paced organization, you will have the opportunity to grow professionally and expand your network while building a rewarding and dynamic career. Company Culture We are committed to recruiting, developing, and retaining diverse and highly talented individuals. In addition to a competitive salary, we offer a comprehensive benefits package, an engaging and growing culture, and a variety of opportunities for our employees' professional growth and development. Cyclyx is an equal opportunity employer and is committed to providing a workplace free from harassment and discrimination. We value mutual respect and diversity in the workplace and are committed to Employment Equity and Inclusion. We celebrate the unique differences of our employees that drive curiosity, innovation, and the success of our business. We encourage applications from all qualified candidates and do not discriminate any applicant's status protected by the laws or regulations in the locations where we operate. Accommodation is available for applicants with disabilities.

Centric Gas (“Centric”) delivers safe, reliable natural gas infrastructure and services across Texas. We support residential, commercial, industrial, and master-planned developments by designing, constructing, and operating gas distribution systems tailored to support growing communities. Centric continues to expand into emerging Texas markets through a commitment to operational excellence, strategic growth, and continuous innovation. The engineering role (Associate Engineer, Engineer, or Senior Engineer) is responsible for supporting the design, modeling, and permitting of natural gas distribution projects. Depending on experience level, the position contributes to or leads technical tasks, prepares construction and permitting documents, and ensures compliance with Centric standards and regulatory requirements. Senior-level candidates may also oversee complex system designs, perform advanced reviews, and provide mentorship to junior engineers. All levels work closely with senior engineering staff to maintain quality, accuracy, and consistency across ongoing projects. General: Upholds and advocates for Centric's core values and behaviors as outlined in the Centric Values and Leadership Framework. Ensures all engineering activities are conducted safely and in compliance with applicable laws, regulations, policies, and procedures (including RRC and 49 CFR Part 192). Foster a culture of always doing things the right way: the Centric Way (safety, openness, integrity, attention to detail, etc.) Collaborates effectively with Project Management, Construction, Operations, Regulatory and other internal groups to ensure project requirements and schedules are clearly understood. Responsibilities and Essential Job Functions: Produce natural gas construction plans, system models, and permitting documents for residential, commercial, industrial, and master-planned development projects. Prepare and submit permit applications to TxDOT, counties, cities, drainage districts, and other regulatory or utility entities. Serve as a point of contact with agency reviewers, addressing comments and coordinating approvals. Plan, design, and support or oversee engineering of natural gas distribution facilities, including mains, services, meters, regulation, stations and limited transmission assets. Perform engineering calculations, assessments, and basic feasibility evaluations using standard engineering methods and applicable codes. Prepare or direct the preparation of reports, specifications, construction documents, schedules, and design packages. Conduct site visits to support construction, verify design intent, evaluate field conditions, and ensure conformance with plans, specifications, and safety standards. Use computer-assisted engineering and design software (e.g., AutoCAD Civil 3D, DNV Synergi Gas, GIS, BlueBeam Revu, Microsoft Office, etc.) to prepare accurate drawings and technical documents. Requirements Bachelor's degree in civil, mechanical or related engineering Associate Engineer: 0-2 years relevant engineering experience. Engineer: 2+ years relevant engineering experience in natural gas distribution or transmission. Engineer: 2+ years of relevant experience, including complex system or stations design and project management. Proficiency with AutoCAD. Proficiency in Microsoft Office applications (Word, Excel, PowerPoint, Outlook) and standard PDF/document management tools (e.g. BlueBeam Revu, Adobe, etc.). Ability to travel up to 20% for client meetings, permitting, and project site visits. Preferred Requirements: Cumulative GPA over 3.3 preferred (for entry-level/Associate Engineer) Working knowledge of Texas RRC requirements and 49 CFR Part 192 for natural gas operations. Understanding of local codes, permitting processes, and regulatory requirements. Registered EIT or PE in Texas (highly preferred).. Experience using DNV Synergi Gas and Monday.com Strong technical skills in gas engineering, design, and analysis. Physical demands / Work Environment: Job requires employee to sit for extended periods of time, lift objects up to 30lbs, grasp, carry, walk, speak, and listen. Work is performed mostly in a controlled office environment. The noise level in the work environment is usually moderate. Benefits Competitive base pay + bonus Great benefits (medical, dental, vision, and more) Generous PTO policy Benefits 10 company paid holidays 401(k) plan with 5% company match Centric Infrastructure Group is an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.

Apply once annually for multiple positions through this posting. Indicate your desired locations in the geographic preference box in the application. Once your application is received, you will be emailed a statement of availability to complete and upload to your application. Qualified applications are valid for one year (from the date of submission) and require yearly renewal if over a year old. We will contact qualified candidates for interviews as positions become available. Applicants not meeting the requirements will be notified by email. JOB SUMMARY Performs advanced and managerial engineering and oversight work. Work involves managing and directing engineering projects and activities; and reviewing and issuing permits and authorizations. Works under minimal supervision with considerable latitude for the use of initiative and independent judgment. ESSENTIAL FUNCTIONS A. Conducts detailed inspections of projects during construction to ensure compliance with the Texas Engineering Practices Act; ensures project quality assurance; and reviews and certifies as-built construction drawings. B. Provides consultant and liaison services to internal and external organizations regarding new design concepts, solutions to problems, and changes to policies and laws; and provides technical assistance regarding installed equipment selection, acceptance, operation, and maintenance. C. Oversees the preparation of structural design criteria documentation and commissioning specifications for facilities and facility subsystems; and plans, develops, conducts, and coordinates structural engineering activities. D. Conducts and coordinates field visits and inspections; monitors contractor performance; assists in conducting operation evaluations; and provides technical assistance regarding the selection of building systems and components. E. Prepares structural construction plans, drawings, estimates, and specifications; prepares and affixes engineering seals to drawings and specifications in compliance with structural codes and standards; and performs structural engineering calculations and prepares documentation to determine adequacy of design. * Performs a variety of marginal duties not listed, to be determined and assigned as needed. MINIMUM QUALIFICATIONS A. Education, Experience, and Training 1. Bachelor's degree in Engineering from a college or university accredited by an organization recognized by the Council for Higher Education Accreditation (CHEA) or by the United States Department of Education (USDE). Each year of experience as described below in excess of the required six years may be substituted for thirty semester hours from an accredited college or university on a year-for-year basis. 2. Six years full-time, wage-earning structural engineering experience in facilities engineering work to include design, construction, or operation and maintenance work. A Master's degree in Engineering from a college or university accredited by an organization recognized by CHEA or by the USDE may be substituted for one year of the required experience. 3. Current, valid license as a professional structural engineer in the State of Texas, or if currently or previously licensed as a professional engineer in any state, must obtain Texas professional engineer licensure within six months of date of employment. Must maintain valid license(s) for continued employment in position. Selected applicants without required license(s) must sign a Credential Contingency Agreement that will remain in effect only until the initially established expiration date. Failure to comply with this contingency statement will result in separation from employment. Credential Contingency Agreements will not be extended or renewed as a result of an employee's separation from employment or acceptance of another position. * Ability to maintain the security and integrity of critical infrastructure as it is defined by state law. Knowledge and Skills 1. Knowledge of facility management techniques and practices. 2. Knowledge of laws, regulations, rules, statutes, and codes pertaining to structural design and construction of government facilities preferred. 3. Knowledge of agency and departmental organizational structure, policies, procedures, rules, and regulations preferred. 4. Skill to communicate ideas and instructions clearly and concisely. 5. Skill to coordinate with other staff, departments, officials, agencies, organizations, and the public. 6. Skill in reading and interpreting working plans, drawings, and specifications. 7. Skill in reviewing and applying policies, procedures, rules, regulations, schedules, guidelines, and contract requirements. 8. Skill to manage multiple projects and activities. 9. Skill in the use of computer software relevant to design and project management. ADDITIONAL REQUIREMENTS WITH OR WITHOUT REASONABLE ACCOMMODATION A. Ability to walk, stand, sit, kneel, push, stoop, reach above the shoulder, grasp, pull, bend repeatedly, climb stairs and ladders, identify colors, hear with aid, see, write, count, read, speak, analyze, alphabetize, lift and carry under 15 lbs., perceive depth, operate a motor vehicle, and operate motor equipment. B. Conditions include working inside, working around machines with moving parts and moving objects, radiant and electrical energy, working closely with others, working alone, working protracted or irregular hours, and traveling by car, van, bus, and airplane. C. Equipment (machines, tools, devices) used in performing only the essential functions include computer and related equipment, calculator, copier, fax machine, telephone, dolly, and automobile.

Job Description Civil Project Engineer Gessner Engineering is looking for a motivated Civil Project Engineer to join our dynamic team. You will support and lead design efforts for a variety of projects-including parking lots, roadways, grading, drainage, and utility layouts-while collaborating with clients, MEP, landscape and architectural consultants, and internal teams to bring creative, buildable solutions to life. Key Responsibilities Support and lead civil design projects from concept through construction. Develop site layouts, grading, drainage, and utility designs using Civil 3D. Coordinate directly with clients, consultants, and review agencies. Prepare construction documents, perform QA/QC reviews, and ensure deadlines are met. Conduct site visits and assist with construction administration tasks (submittal review, RFIs). Manage project tasks, priorities, and timelines in collaboration with project managers. Qualifications Bachelor's or Master's degree in Civil Engineering. 0-5 years of experience in civil/site design and construction document preparation. E.I.T. registration in the State of Texas required. Proficiency with AutoCAD Civil 3D; experience with HY-8, Autodesk SSA, or Flowmaster is a plus. What We're Looking For Solutions-minded: proactive problem solver with a “find a way” attitude. Collaborative: team player with strong communication and coordination skills. Driven: eager to learn, take initiative, and grow professionally. Gessner Engineering is an equal opportunity employer and does not discriminate on the basis of any legally protected status or characteristic. Race/Color/Gender/Sexual Orientation/Gender Identity/Religion/National Origin/Disability/Veteran. Gessner Engineering does not sponsor employment visas (e.g., H-1B, OPT, CPT, TN, or similar) at this time.

About Us: Panelmatic, Inc. was founded in 1957 in Youngstown, OH to serve manufacturing industries with the design and build of custom electrical, instrument, and pneumatic control panels. Our business has sufficiently grown over the years to support expansion for our clients. We have produced control packages for many of America's top corporations in the chemical, environmental, food, pulp and paper, rubber, petroleum, pharmaceutical, glass, metals, and utilities industries. We also deliver equipment for use worldwide. Our rigorous methodology assures compliance with domestic and international standards. We can meet the needs of our diverse clientele from start to finish through sales, design, fabrication, testing, and delivery. Since 1957, we have been known for our high-quality, custom-built control packages, our comprehensive service, and our technological and manufacturing expertise. This expertise assures you of our ability to handle the largest and most complex packages quickly and efficiently. Job Summary: Panelmatic is looking for an accountable Project Engineer to be responsible for all engineering and technical disciplines related to projects. The Project Engineer will schedule, plan, forecast, resource, and manage all the technical activities aiming at assuring project accuracy and quality from conception to completion. Job Duties: Manage multiple projects from pre-booking to customer final acceptance. Provide consultation on proposal development as required. Participate in the internal kick-off meeting from sales/estimating to the organization. Follow document management processes for project documentation to ensure compliance with business, contractual, and document retention requirements/laws. Manage the scope and deliverables from a technical & engineering aspect. Process customer single-line, schematic, and/or loop drawings. Establish and purchase a Bill of Material to be furnished by PBS. Establish the type of fabrication drawings required and once a CAD operator has been assigned to the project, communicate directly with the operator all necessary requirements and information pertaining to the job Establish the type of assembly, wiring, conduit, and/or tubing drawings required and communicate with the CAD operator all necessary requirements and information pertaining to the project. Obtain formal acceptance from the Customer for all contractual deliverables. Requirements Minimum Qualifications: Bachelor's degree in electrical engineering (ABET) Or a minimum of 10 years' proven experience in the electrical engineering field required Three plus years' experience in electrical equipment manufacturing required Three plus years' experience in electrical engineering principles, circuits, and systems required Three plus years' experience in industry standards and regulations including NEC, UL, IEC, and IEEE required Three plus years' experience AutoCAD, EPLAN, and electrical design tools required Excellent problem-solving and analytical skills required Strong attention to detail and ability to work on multiple projects simultaneously required Effective communication and interpersonal skills to collaborate with diverse teams required Ability to adapt to changing project requirements and priorities required Adherence to our core values required Must live in the greater Houston area required Ability to pass physical, drug, driving, and background check required Ability to physically push, pull, and lift 50lbs or more required Ability to sit, stand, and walk for four-plus hours at a time required Ability to stoop and bend for four-plus hours required Preferred Qualifications: Master's degree preferred Three years' experience in design or similar engineering role preferred Experience with simulation and analysis software such as SKM or ETAP for electrical systems preferred Knowledge of sustainable and energy-efficient design practices preferred Familiarity with specific industry applications for energy fields, food processing, mining, power plant-substation, data mining, etc. preferred Benefits Benefits: Medical, dental, vision, HSA, term life, AD&D, STD, LTD 100% medical premium paid for by Panelmatic for the employee-only level medical coverage 80% paid for by Panelmatic and 20% paid for by the employee on all other level medical coverage (ie employee plus child, employee plus spouse, family) 401K and bonuses Scholarships, educational reimbursement, paid volunteerism, and paid personal and professional development provided PTO and paid holidays provided Career advancement opportunities Competitive wages Family-friendly environment with average employee tenure above five years

Job Description About Us: Panelmatic, Inc. was founded in 1957 in Youngstown, OH to serve manufacturing industries with the design and build of custom electrical, instrument, and pneumatic control panels. Our business has sufficiently grown over the years to support expansion for our clients. We have produced control packages for many of America's top corporations in the chemical, environmental, food, pulp and paper, rubber, petroleum, pharmaceutical, glass, metals, and utilities industries. We also deliver equipment for use worldwide. Our rigorous methodology assures compliance with domestic and international standards. We can meet the needs of our diverse clientele from start to finish through sales, design, fabrication, testing, and delivery. Since 1957, we have been known for our high-quality, custom-built control packages, our comprehensive service, and our technological and manufacturing expertise. This expertise assures you of our ability to handle the largest and most complex packages quickly and efficiently. Job Summary: Panelmatic is looking for an accountable Project Engineer to be responsible for all engineering and technical disciplines related to projects. The Project Engineer will schedule, plan, forecast, resource, and manage all the technical activities aiming at assuring project accuracy and quality from conception to completion. Job Duties: Manage multiple projects from pre-booking to customer final acceptance. Provide consultation on proposal development as required. Participate in the internal kick-off meeting from sales/estimating to the organization. Follow document management processes for project documentation to ensure compliance with business, contractual, and document retention requirements/laws. Manage the scope and deliverables from a technical & engineering aspect. Process customer single-line, schematic, and/or loop drawings. Establish and purchase a Bill of Material to be furnished by PBS. Establish the type of fabrication drawings required and once a CAD operator has been assigned to the project, communicate directly with the operator all necessary requirements and information pertaining to the job Establish the type of assembly, wiring, conduit, and/or tubing drawings required and communicate with the CAD operator all necessary requirements and information pertaining to the project. Obtain formal acceptance from the Customer for all contractual deliverables. Requirements Minimum Qualifications: Bachelor's degree in electrical engineering (ABET) Or a minimum of 10 years' proven experience in the electrical engineering field required Three plus years' experience in electrical equipment manufacturing required Three plus years' experience in electrical engineering principles, circuits, and systems required Three plus years' experience in industry standards and regulations including NEC, UL, IEC, and IEEE required Three plus years' experience AutoCAD, EPLAN, and electrical design tools required Excellent problem-solving and analytical skills required Strong attention to detail and ability to work on multiple projects simultaneously required Effective communication and interpersonal skills to collaborate with diverse teams required Ability to adapt to changing project requirements and priorities required Adherence to our core values required Must live in the greater Houston area required Ability to pass physical, drug, driving, and background check required Ability to physically push, pull, and lift 50lbs or more required Ability to sit, stand, and walk for four-plus hours at a time required Ability to stoop and bend for four-plus hours required Preferred Qualifications: Master's degree preferred Three years' experience in design or similar engineering role preferred Experience with simulation and analysis software such as SKM or ETAP for electrical systems preferred Knowledge of sustainable and energy-efficient design practices preferred Familiarity with specific industry applications for energy fields, food processing, mining, power plant-substation, data mining, etc. preferred Benefits Benefits: Medical, dental, vision, HSA, term life, AD&D, STD, LTD 100% medical premium paid for by Panelmatic for the employee-only level medical coverage 80% paid for by Panelmatic and 20% paid for by the employee on all other level medical coverage (ie employee plus child, employee plus spouse, family) 401K and bonuses Scholarships, educational reimbursement, paid volunteerism, and paid personal and professional development provided PTO and paid holidays provided Career advancement opportunities Competitive wages Family-friendly environment with average employee tenure above five years

Industrial Air Flow Dynamics has partnered with Hueman to find a Full Time Project Engineer in The Woodlands, TX. Industrial Air Flow Dynamics is a leading provider of replacement expansion joints, pipe penetration seals and HRSG duct/liner replacement systems sold to power plants. We provide our customers with a turn-key solution through engineering support, 100% domestic high-quality manufacturing and installation field services. With over 20 years of experience, Industrial Air Flow Dynamics is the premier field service group in the power generation industry and the leading provider of replacement expansion joint systems, penetration seal systems, and HRSG duct/liner replacement systems. We provide our power plant and utility customers with turn-key solutions driven by our engineering expertise. Our engineering team diagnoses the root cause of the problem and improves the OEM design, then our manufacturing team will build the required products, and our field services team will complete the on-site installation. At IAFD you will work directly with other project engineers on all tasks, design IAFD product assemblies, and individual components, generate engineering prints, create job bill of materials, take-offs, and other peripheral engineering needs. You will report to our engineering manager and will be mentored by the Executive Chairman directly. There will be opportunities for you to travel to power plants when we are doing inspections, investigations or our field service teams need support. Our engineering team in integral in scoping repairs for plants and assisting directly in defining bid scope for our sales team. You will gain hands-on training being integrated into our organization and this position can develop in responsibility into group lead, lead engineer, or engineering management as we are growing our company rapidly. Job Requirements: BS Mechanical Engineering Superior verbal and written communication skills. Acute attention to detail in a professional atmosphere. Must be willing to work in a fast-paced environment with tight timelines. Driven to succeed and take ownership of each project you work on Must be able to shift priorities and multitask as needed. Proficient in All Microsoft applications and SolidWorks Hueman is proud to partner with Industrial Air Flow Dynamics as the exclusive recruitment partner for this role If you are interested in learning more about a career with Industrial Air Flow Dynamics as a Project Engineer, apply today!

Join Ferrovial: Where Innovation Meets Opportunity Are you ready to elevate your career with a global leader in infrastructure solving complex problems and generating a positive outcome on people's lives? At Ferrovial, we are not just a company; we are a community of innovators and trailblazers. Listed on three major stock markets: Nasdaq (US), Euronext Amsterdam (Netherlands) and IBEX 35 (Spain), we are also member of the Dow Jones Sustainability Index and FTSE4Good. We operate in more than 15 countries and have a workforce of over 24,000 professionals worldwide. Ferrovial's activity is carried out through our business units, including Highways, Airports, Construction, and Energy. Ferrovial Webber Energy is a joint venture between Ferrovial Energy Solutions and Webber, dedicated to promoting the transition toward a sustainable, clean, and cutting-edge economy. As a full Engineering, Procurement, and Construction (EPC) company, we focus on delivering turnkey solutions for renewable energy projects. Our expertise spans the construction of photovoltaic (PV) plants, Battery Energy Storage Systems (BESS), and wind projects. We cover the complete energy cycle, from engineering and procurement to construction and commissioning, ensuring that our clients receive efficient and high-quality solutions tailored to their specific needs. Our team, with more than 15 years of experience and over 2GW of accumulated project capacity, brings a wealth of knowledge and expertise to every project we undertake. Our mission is to develop solutions that exceed satisfaction, maximize shareholder value, foster the professional development of our crew members, and have a positive impact on our community. We are committed to quality, safety, sustainability, and the satisfaction of our clients in every project we embark on. Why Ferrovial? Global presence, local impact: Be part of a company that is shaping the future of infrastructure worldwide, with challenging roles and projects that make a real difference. Collaborative excellence: Work alongside talented professionals in a collaborative environment where your ideas and contributions are valued. Inclusive Culture: Thrive in an innovative and respectful workplace that values every voice, celebrates what makes us unique and turns differences into innovation. Career growth: Benefit from global and cross-business unit mobility, with development processes designed to ensure your professional growth. Compelling benefits and employee wellbeing: Enjoy a comprehensive benefits package that rewards your hard work and dedication and take advantage of initiatives designed to support your physical and psychological health. Productivity tools: Utilize cutting-edge tools like Microsoft Copilot to enhance your productivity and efficiency. Job Description: Join Our Team as a Mechanical Project Engineer and Grow Your Career with Webber Inspiring Career Opportunity Are you wanting to get your foot in the door at a fast-growing Company? Webber, an industry leader in construction and infrastructure, is seeking a dynamic Mechanical Project Engineer to join our team. Your Role: Driving excellence through technical expertise and innovation The Mechanical Project Engineer supports the planning, coordination, and execution of renewable energy projects, including substations, wind farms, and photovoltaic plants. Reporting to the Project or Site Manager, this role collaborates with multidisciplinary teams, oversees subcontractors, and ensures all project activities are completed safely, efficiently, and in compliance with specifications, quality standards, and applicable codes and laws. The Project Engineer is responsible for technical guidance, resource management, and progress tracking to deliver high-quality installations on schedule and within budget. What You Will Do: Supervise and coordinate field personnel and subcontractors to ensure compliance with project plans, specifications, and safety standards. Oversee site preparation, construction, installation, and commissioning activities for energy infrastructure projects. Provide technical support, interpret construction drawings, and resolve field issues related to equipment and installations. Monitor schedules, set production targets, and track progress for assigned tasks. Forecast and control costs, assist with financial closings, and maintain accurate records of work status. Conduct field inspections to verify quality of work and adherence to codes and regulations. Ensure effective implementation of safety policies and procedures. Manage material and equipment needs, track usage, and minimize waste. Communicate effectively with project management, suppliers, and stakeholders to address challenges and update on progress. Perform other duties as assigned by the Project or Site Manager. Who You Are: A Profile of Success Bachelor's degree in Mechanical Engineering Minimum of 3 years' relevant experience in energy infrastructure projects, including field supervision or project support roles. Strong knowledge of construction systems, equipment, installation practices, and utility requirements. Experience interpreting and applying relevant codes and standards (e.g., NEC, IEEE, NEMA, OSHA, local building codes). Proficient in reading and interpreting construction drawings and specifications. Strong organizational, communication, and leadership skills. Proficiency with construction management software (e.g., Procore, Blue Beam) and Microsoft Office Suite. Valid driver's license and willingness to travel as . What You'll Love: The Webber Advantage Competitive base salary and bonus potential Comprehensive benefits and a commitment to equal employment opportunities. 401k match up to 6% Learning and development programs and education reimbursement Opportunities for professional growth in a company that values innovation and sustainability. A collaborative culture that values each member of our team. Ready to Seize the Challenge and Move the World Together? At Webber, we are not just building infrastructure; we are building careers. If you are eager to contribute to a company that is shaping the world on the move, we want to hear from you. Apply now and take the first step towards a fulfilling career where you can truly make a difference. Webber and its companies (e.g. Webber, LLC, Webber Waterworks, LLC, Webber Infrastructure Management, Inc., Ferrovial Webber Energy, LLC) are equal opportunity employers. We treat all jobs applications equally, regardless of gender, color, race, ethnicity, religion, national origin, age, disability, pregnancy, sexual orientation, gender identity and expression, covered veteran status or protected genetic information (each, a “Protected Class”), or any other protected class in accordance with applicable laws. This policy applies to all terms and conditions of employment, including, but not limited to: hiring, placement, promotion, termination, leaves of absence, compensation, and training. Seize the challenge. Move the world together! Innovative, creative, respectful, and diverse are some of the ways we describe ourselves. We are motivated by challenges, and we collaborate across our business units to move the world together. Your journey to a fulfilling career starts here! Ferrovial is an equal opportunity employer. We treat all jobs applications equally, regardless of gender, color, race, ethnicity, religion, national origin, age, disability, pregnancy, sexual orientation, gender identity and expression, covered veteran status or protected genetic information (each, a “Protected Class”), or any other protected class in accordance with applicable laws. #WeAreFerrovial

Job DescriptionSalary: Qualifications Experience: Civil engineering / land development, 3 years (required) Passed P.E. Exam Company Bio: MHESis a well-established engineering firm founded in 2002in Boerne, Texas. MHESprovides civil engineering design, land surveying anddevelopmentservices for commercial, residential,andgovernmentaldevelopments.From its conception, Matkin Hoovers entrepreneurial vision has been to provide quality engineering and surveying services to clients with the personal involvement of a small business. Today, MHES has developed and grown into a full service, professional civil engineering & surveying firmsupported by a strong force of experienced and dedicated licensed professional engineers, engineers-in-training, surveyors, CAD technicians, and administrative staffserving clients globally. Typical Responsibilities: A successful candidate will work harmoniously within a team on residential, commercial, and/or federal land development projects. The responsibilities will include both design and management of the project and team staff. You will assist the Project Manager with design team oversight, organize weekly team status meetings, report project status to Project Manager among other responsibilities. The position will take project ownership for selected projects as determined by the project manager and ensure the project meetsand exceed client expectations by ensuring accurate, complete, and timely communication and work product. Qualifications Bachelor of Science in civil engineering (required) 3 years of progressive experience in civil engineering design including: water and wastewater infrastructure, roadway design for City and County projects, civil site design, and drainage. Ability to organize a team to coordinate assignments. Familiarity with local county and municipal design requirements and permitting. Ability to focus on the details of a project while understanding the big picture from the project team perspective. Ability to work on multiple projects concurrently while maintaining strong attention to detail with limited supervision. Proficiency with Hydrologic & Hydraulic modeling software such as: HEC-HMS, HEC-RAS, HY-8, etc. Proficiency in Technical writing applied to reports, correspondence, proposals, etc. Efficiently utilize time in executing assigned tasks accurately, on schedule, and within budget. Proficiency with AutoCAD Civil 3D (preferred). Familiarity with TxDOT design requirements (preferred). Effectively interact with clients, vendors, and staff at all levels. Excellent communication, organization, and customer service are essential. Schedule Expectations: Full Time 40+ hour work week or as required Monday-Friday Benefits: Salary commensurate with experience Quarterly Bonus Potential Medical/Dental/Vision/Life/Disability Insurance Program 401K Retirement Plan, with company contribution Paid Holidays Paid Time Off Companys website: *****************************

The Project Engineer role will own the technical design, project execution, and customer deliverables for product lines focused on floating roof rim seals (primary/secondary, shoe, wiper/compression) and internal floating roofs (IFRs) and accessories for above-ground storage tanks. You'll translate specifications into manufacturable designs, lead cross-functional project delivery from kickoff to commissioning and ensure compliance with applicable industry standards and emissions regulations. What You'll Do Design & Engineering Develop engineering designs and calculations for rim seals, IFRs, and related accessories (e.g., gauge pole well seals, fabric covers, wax scrapers, anti-rotation devices). Produce and review GA drawings, detailed fabrication drawings, BOM/MRLs, and installation procedures. Select materials (elastomers, fabrics, foams, metals) based on chemical compatibility, temperature, vapor pressure, and service conditions. Perform fit-for-purpose assessments with in-house programs (rim space reports, shell out-of-roundness evaluations, nozzle interferences) and propose design adaptations to suite. Engineering Project Management Serve as the project's single-point technical contact from proposal through closeout. Build and maintain the project plan and schedule through the EMP (Order management system), tracking key deliverables through the system, communicating key updates to project stakeholders. Communicate schedule and design updates with internal Project Managers and in project ordering system. Compliance and Quality Ensure designs and deliverables align with applicable tank standards (e.g., API 650 tank standards and relevant codes requirements), while also considering client specs and local regulations. Participate in the quality efforts to identify, address, and resolve NCRs (Non-Conformance Reports) Continuous Improvement Capture lessons learned; standardize templates, drawing details, and calculators. Partner with Product and Drafting Automation to expand parametric models and standard part libraries. Qualifications Required B.S. in Mechanical Engineering, Structural Engineering, Mechanical Engineering Technology, or equivalent experience. Proficiency with 2D/3D CAD (e.g., AutoCAD, Inventor/SolidWorks) and creating fabrication-ready drawings/BOMs. Demonstrated project management skills: scheduling, cost tracking, risk/change management. Working knowledge of tank service conditions, materials compatibility, and emissions control concepts. Strong communication with customers, fabricators, and field teams; clear technical writing. Preferred Familiarity with API tank standards and floating roof practices; understanding of emissions-related regulatory requirements for storage vessels. Experience reading tank drawings, inspection reports and translating into design actions. Exposure to FEA for simple brackets/clip designs and tolerance stacks (nice to have). Hands-on experience with floating roof/IFR seals or closely related tank internals/mechanical assemblies. 2+ years engineering/project experience in terminals, refining, petrochemical, or storage tank equipment. Success Metrics (What “Great” Looks Like) On-time delivery of engineering and site packages (>95% milestones met). Cost performance within ±5% of project baseline; positive change-order capture. Quality: zero repeat NCRs; Standardization: contribution to design calculators, templates, or automation libraries. Work Environment & Physical Requirements Office/hybrid with periodic shop and site visits (tanks/terminals). Ability to climb fixed ladders and navigate tank roofs when properly permitted and escorted, and to use standard PPE. Compensation & Benefits Competitive base salary with project bonus eligibility. Health, dental, vision, 401(k), PTO, and professional development support. About HMT HMT is the global leader in aboveground storage tank solutions. HMT brings a distinct level of innovation and service to the tank industry through a unique approach of partnering with customers to optimize tank operations. Knowing that every customer's need is different, we use our decades of experience to customize solutions that help tank operations become more efficient, more productive, and more profitable. HMT is an Equal Employment Opportunity Employer. We will not tolerate discrimination because of race, color, religion, sex, age, national origin, military or veteran status, mental or physical disability, genetic information, gender, gender identity or expression, sexual expression, or any other unlawful reason. All qualified applicants are encouraged to submit applications for employment. Employment with HMT is At-Will.

Doka USA is proud to be Certified™ by Great Place to Work ! We are committed to fostering a supportive work environment where all of our team members can thrive. As one of the world's leading companies for developing, manufacturing, and distributing formwork solutions for the construction sector, Doka employs more than 9,000 people in over 58 countries and is part of the family-owned Umdasch Group. We Make It Work. Job Description As a Project Engineer for Doka USA, you will play a crucial role in the planning, design, and execution of construction projects. You will collaborate with our clients, project managers, and construction teams to ensure the successful implementation of formwork and shoring solutions that meet project requirements and exceed client expectations. This role will be based out of our Southwest branch located in Tomball, TX and will report into our Engineering Manager. This will be an on-site position. Key Responsibilities: Work closely with project managers and clients to understand project requirements and objectives. Develop detailed plans and designs for formwork and shoring systems based on project specifications and structural requirements and utilize industry-standard software and tools (i.e., AutoCAD, Revit, ect.). to create accurate drawings, models, and calculations. Provide technical expertise and guidance to project teams and clients regarding formwork and shoring solutions. Collaborate with engineers, architects, and construction professionals to address technical challenges and optimize project performance. Identify and select appropriate formwork and shoring materials based on project requirements, budget constraints, and site conditions. Ensure that formwork and shoring systems comply with industry standards, building codes, and safety regulations. Monitor project progress, identify potential risks or delays, and implement corrective actions as needed to keep projects on track. Qualifications Bachelor's degree in civil engineering, Structural Engineering, or related field. Proven experience in formwork and shoring design, preferably in the construction industry. Proficiency in CAD software (e.g., AutoCAD), structural analysis tools, and project management software. Strong analytical skills and attention to detail. Excellent communication and interpersonal skills. Ability to work effectively in a fast-paced, deadline-driven environment. Professional Engineer (PE) license a major plus. Additional Information Doka offers terrific career opportunities, competitive compensation, comprehensive benefits including medical, dental, vision, Flexible Spending Account, company paid life insurance, supplemental voluntary term life insurance, 401k retirement plan (Roth and Non-Roth), short-term disability, AFLAC policies, paid time off (sick/personal, vacation, floating holiday and company paid holidays) and an exciting opportunity to join as a member of Doka's team. If working with some of the most impressive construction projects in the US and joining an industry leader excites you, please submit your resume by clicking below. Visit us on-line at *************** for additional information on Doka USA, Ltd. Doka USA, Ltd. is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. If you are interested and have a strong competitive drive, positive attitude, a desire to learn and grow from your experiences, then this is your opportunity to make an immediate difference. Please submit your resume and apply now. External candidates must be authorized to work for any employer in the USA.

About Us: PurgeRite, the leader in high-quality mechanical flushing services, is seeking highly motivated and experienced engineers. We serve all sizes of commercial mechanical companies across the U.S. with end user clients that include many top Fortune 100 companies. Projects include data centers, semiconductor and EV battery manufacturers, universities, health care facilities, and district energy systems. We are a first-mover company seeking an individual that works with a sense of urgency, provides excellent customer service, and can independently drive multiple projects. This position will design engineered solutions for commissioning or remediating customer projects. This individual should seek to grow their technical and project engineering capabilities while promoting our organization's goals and values. Our team has an entrepreneurial spirit and is results driven. Position Overview: Our customers choose PurgeRite because of our unique ability to deliver turn-key flushing solutions for some of the most complex hydronic systems being deployed today. This key position is responsible for engineering solutions unique to each customer's system after acquiring a deep understanding of their system design, their flushing and chemical treatment requirements, and the site infrastructure. Key Responsibilities: · Independently analyze complex hydronic systems and site considerations to devise an overall flushing strategy to meet customer needs · Visit job sites to validate assumptions, identify unique constraints, and build strong customer relationships · Communicate with multiple stakeholders such as owner representatives, general contractors, mechanical contractors, and chemical providers to achieve alignment on goals, constraints, and specifications · Perform necessary calculations, define and document detailed flush plans · Review flush plans with customers, revise as necessary based on customer feedback, and obtain final agreement. · Act as the primary technical point of contact for sales, operations, and customers · Review operational feedback from completed projects as input to continuous improvement efforts in our methods and practices. Identify and prioritize opportunities and drive those improvements Requirements Requirements: · Strong written and verbal communication skills with all stakeholders from field technicians to owner representatives· A strong sense of urgency and dedication to meeting project timelines· Proficiency in reading and interpreting construction drawings· Demonstrated ability to rapidly solve problems with practical solutions· Experience with pump sizing and related calculations such as interpreting pump curves, performing NPSH calculations, determining flow velocities in networked piping, and calculating heat gain· Bachelor's degree in Engineering or equivalent relevant combined education and work experience.Preferred Qualifications:· PE license or EIT Certification· Technical knowledge of hydronic heating and cooling systems and components· Experience developing flush plans for field implementation in commercial and industrial environments· Proficiency in performing take-offs from construction drawings· Proficiency with technical software (such as Revit/Navisworks, BlueBeam, Pipeflow, Excel, etc) to maximize engineering productivity. Position Goal: Devise and communicate flushing plans for complex hydronic systems which enable customer goals while considering operational and economic efficiencies. Company Support: The company is committed to providing the necessary resources and training to ensure this person can be successful in learning and enhancing our approach as we move forward. PurgeRite is an Equal Opportunity/Affirmative Action employer. We promote equal opportunities for all with respect to hiring, terms of employment, mobility, training, compensation, and occupational health, without discrimination as to age, race, color, religion, creed, sex, pregnancy status (including childbirth, breastfeeding, or related medical conditions), marital status, sexual orientation, gender identity / expression (including transgender status or sexual stereotypes), genetic information, citizenship status, national origin, protected veteran status, political affiliation, or disability.

Job Description Technology Infrastructure Engineer Cyclyx International, LLC ("Cyclyx") is a pioneer in the plastic value chain, leveraging our proprietary technology to convert post-use plastic waste into high-quality feedstock for recycling. We provide customized solutions for brands and companies aiming to achieve their recycled content goals, actively supporting the development of a circular economy. Our state-of-the-art Circularity Center, currently under construction in Houston, TX, will be the first large scale facility in the United States, designed to process a diverse range of post-consumer, commercial, and industrial plastic waste. This innovative center will have the capacity to produce 300 million pounds of custom-formulated feedstock per year and convert it into ISCC-PLUS-certified feedstock suitable for mechanical and advanced recycling applications. We are dedicated to operating safely and improving the recyclability of all plastics. Our customers are at the core of our mission, and we strive to exceed their expectations by understanding their unique needs and delivering exceptional value. We uphold the highest standards of accountability and integrity in all our operations. We are committed to fostering a diverse, inclusive work environment where every voice is valued. Our open-door policy encourages employee engagement and feedback, promoting continuous improvement through collaboration and transparency. At Cyclyx, we believe that working together can drive meaningful change in the recycling landscape. Role Overview The Infrastructure Systems Engineer is responsible for supporting, maintaining, and optimizing the organization's server and network infrastructure environments. A successful candidate will provide hands-on technical assistance across hardware and software platforms, ensuring systems remain reliable, secure, and efficient. They will monitor system performance, troubleshoot technical issues, and proactively address vulnerabilities to maintain operational integrity. This role requires strong problem-solving skills and a collaborative approach. The engineer will work closely with the Cyclyx Technology team, supporting daily operations and implementing solutions that meet the business's practical needs. The candidate should be adept at maintaining and updating existing infrastructure, documenting processes and configurations, and responding to evolving security requirements. Previous experience in a manufacturing environment is essential, particularly with ERP, SCADA, Business Intelligence, and warehousing systems. Familiarity with managing and supporting these platforms will enable the engineer to respond quickly to technical challenges and ensure critical systems stay available and up-to-date. Key Responsibilities Focus on deploying, maintaining, and updating infrastructure to ensure optimal performance and security. Create and maintain clear documentation-including reference architectures, design specifications, and rationale-to support the team's understanding of infrastructure decisions. Proactively recommend technology solutions that align with current business goals. Identify and address security risks, executing effective mitigation strategies. Specify hardware and software requirements for all systems, and pursue automation and process improvements to enhance both IT and business operations. Qualifications Candidates should have proven experience as a Server or Network Engineer within heavy industry or manufacturing environments. Expertise in virtualized server infrastructures is essential, including platforms such as VMware, KVM, XCP-ng, and Citrix. A strong background in managing Layer 2 and Layer 3 multi-site networks-especially with technologies like Cisco and PicOS-is required. Experience in managing CCTV and access control systems, particularly with Axis, Ubiquiti, and HikVision platforms. Proficiency in supporting Azure cloud infrastructure, including Windows Server and AD/Entra administration, is important. Additional experience with M365 services (such as Office, Exchange and Teams) administration is highly valued. Candidates should be comfortable working in Linux environments (particularly Ubuntu) and managing both servers and desktops. Familiarity with containerized infrastructure, including Docker, Kubernetes, and LXD, is expected. Finally, applicants should have a track record of deploying and managing cybersecurity solutions in industrial and business settings, with experience using Fortinet products such as FortiGate, FortiAnalyser, and FortiSRA. Education Bachelor's degree in computer science, engineering, or extensive industry experience. LICENSE OR CERTIFICATE Candidates are encouraged to possess recognized IT certifications in networking or server technologies from reputable organizations such as Microsoft, VMware, Cisco, or Fortinet. Position Mechanics Reports to: Senior Director, Technology Systems Type: Exempt; Full-time Work Hours: Flexible, but must be available, 8:00-5:00, Monday to Friday with occasional evening and weekend work. Location: Houston, TX Work environment: Primarily an office environment, but may also work in an industrial environment at times where the use of PPE is required. Travel: Minimal - Less than 10%. Physical Demand is substantially that of an office environment. Occasional lifting and manual work. Must be legally authorized to work in the U.S. without sponsorship for employment visa status. Company Benefits Cyclyx offers a competitive benefits package which goes beyond just a paycheck. Our comprehensive benefits package includes competitive, company funded (up to 90% company-paid premiums) health, dental, vision and insurance plans to robust retirement benefits that include company-matching contributions, and much, much more. We also provide development and growth opportunities because we believe investing in your success is investing in our success. Also, working for a rapidly growing, fast-paced organization, you will have the opportunity to grow professionally and expand your network while building a rewarding and dynamic career. Company Culture We are committed to recruiting, developing, and retaining diverse and highly talented individuals. In addition to a competitive salary, we offer a comprehensive benefits package, an engaging and growing culture, and a variety of opportunities for our employees' professional growth and development. Cyclyx is an equal opportunity employer and is committed to providing a workplace free from harassment and discrimination. We value mutual respect and diversity in the workplace and are committed to Employment Equity and Inclusion. We celebrate the unique differences of our employees that drive curiosity, innovation, and the success of our business. We encourage applications from all qualified candidates and do not discriminate any applicant's status protected by the laws or regulations in the locations where we operate. Accommodation is available for applicants with disabilities. Job Posted by ApplicantPro