Engineering associate jobs in North Greenbush, NY - 275 jobs

We are seeking a qualified Transit Project Lead (Engineer or Planner) with ten (10) plus years' experience to become a part of our established Transit Group for our Albany, Poughkeepsie, Syracuse or White Plains Offices. This position will work on a variety of projects and interact with traffic engineers, highway engineers, transportation planners and our clients. Projects generally focus on bus related planning and infrastructure, and can include transportation and transit planning, station design, highway design, facilities and site design, alternatives analysis and concept development, and construction coordination. The position may require efforts outside normal business hours to travel, meet client requests and/or attend meetings. A background and a desire to improve our public transportation systems is a plus. Responsibilities include: Investigate options to improve efficiency in bus service and make recommendations for network redesign and planning Bus rapid transit experience Evaluate bus operations to identify opportunities to reduce overhead costs, Design bus facilities including maintenance yards and bus stops Lead intermediate and limited complex transportation planning, and/or engineering assignments in this field. Lead or assist with multidisciplinary projects involving architecture, mechanical and structural engineering disciplines Prepare conceptual plans, graphics and documents. Lead project and/or public meetings. Responsible for report writing for all related projects. Represent the organization in communications and conferences pertaining to broad aspects of Public Transportation related planning and/or engineering assignments. Assume client relations and financial responsibilities for routine projects. Develop and/or review project documents for scope, conformity and quality. Work with accounting to complete monthly invoicing for projects. Assist with project management duties - staffing, scope, schedule and budget development Assist with business development activities, including proposal preparation Check planning and designs prepared by others Direct coordination with clients Job Requirements: 10+ years of experience in a similar role. A professional licensure and/or certifications in related planning and engineering disciplines. (AICP, PE) The candidate must have experience working on public transportation projects in some capacity, preferably with New York State public transportation authorities and FTA experience a plus. Active member of a professional practice organization. Pay Range: Albany/Syracuse, NY: $48/hour - $62.50/hour Poughkeepsie, NY: $52/hour - $68/hour White Plains, NY: $55/hour - $72/hour Pay is based on applicant's ability/experience and will be rated accordingly. EXTRAs At Creighton Manning, continuous learning and mentoring are part of our DNA. There are opportunities to advance your career, either on the technical track towards Project Manager or into various corporate leadership positions. Team members get 360 reviews with input from peers and managers, to get a broad picture of their contributions. #INDHP Qualifications EducationBachelors of Engineering (required) Licenses & CertificationsDriver's License (required) Professional Engineer (required) Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Project Engineer II- Licensed (Electrical) CSArch, an A/E firm with offices in Albany and Newburgh, NY is currently seeking a full-time Project Engineer for the Albany office. The Project Engineer II has at least 5 years of experience as a Licensed Engineer (Electrical). The successful candidate should possess an Associate's, Bachelor's, or Master's degree of Engineering. The candidate must have at least 3 years of Revit experience. This position is primarily responsible for the technical engineering and production aspects of medium to large projects from conceptual design through construction closeout. SPECIFIC DUTIES AND RESPONSIBILITIES: Leads in-house building systems design / engineering team through development of design and construction documentation process. Could also provide Project Engineer support as part of a larger project team on larger projects. Develops and coordinates with all engineering disciplines and architecture team to produce construction documents. Involved in field investigations, detailed engineering design work and development of design computations. Oversees code compliance with applicable engineering codes, standards and guidelines. Informs, directs and trains engineers-in-training and less experienced project engineers relative to these. Develops and coordinates engineering technical specifications. Adheres to and implements corporate contract documentation procedures and standards as they best apply. Responsible for all engineering aspects of construction administration including but not limited to shop drawing/submittal review and coordination, attending project meetings, developing field reports, periodic monitoring of construction sites, interfacing with contractors and clients. Supports project management with development of staffing, fee, budget estimating and project scheduling. Ensures that Quality Control procedures are being met. Will supervise small engineering staff and could have significant client contact. REQUIREMENTS/QUALIFICATIONS: Licensure Requirements: Licensed Education Requirements: Associate's, Bachelor's, or Master's degree of Engineering in electrical engineering. Experience: Minimum 5 years experience as a Licensed Engineer Computer Skills: Revit- minimum of 3 years experience and other design/presentation software programs; MS Office proficient; use of Adobe products; Submittal Exchange Excellent written, verbal and visual communication skills Detail oriented; highly organized; self-motivated; able to exercise independent judgment, multi-task, delegate, plan, set goals, meet critical deadlines, be accurate, work under pressure; conflict resolution/negotiation skills; team building and leadership skills. 40+ hours M-F; overtime as necessary to meet deadlines, travel, driving, occasional lifting/carrying up to 40 lbs. Site observations may involve outdoor weather, year-round, moving mechanical equipment, climbing ladders/scaffolding and observing high area construction activities. Noise level is often loud. Background check may be required. Requires use of hardhat, construction boots, and possibly other safety equipment as required on a construction site.

Basic Qualifications Requires a Bachelor's or Technology degree in Engineering or a related specialized area/field, or equivalent (4 years job-related experience). Requires an additional 5+ years of job-related experience, or a Master's degree with 3+ years of job-related experience. CLEARANCE REQUIREMENTS: Department of Defense Secret security clearance is required within a reasonable period of time. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position As an Advanced Nuclear Weapons Safety Systems Engineering Support Specialist (Adv Engr Support Spec) for the Fire Control Missile Platform, you'll be a member of a cross functional team responsible for ensuring compliance of Nuclear Weapons Safety requirements for the products we design. Also, you'll analyze and generate Nuclear Weapons Safety artifacts as part of the systems being developed. We encourage you to apply if you have any of these preferred skills or experiences: Performed system safety analyses of hardware and software including preparing and/or updating safety assessment reports and risk assessment reports Performed safety analysis techniques for fault tree analyses, failure mode and hazard analyses, as well as experience with the Safety process during product development Performed system and/or software design where Nuclear Weapon Safety was involved What sets you apart: Creative thinker with demonstrated success leading the systems development life cycle Collaborative team player eager to provide technical leadership and position others for success Thorough knowledge of technology trends and willingness to champion new ideas and process improvements Strong presentation and communications skills with experience in the art of negotiation and the ability to meet challenging customer requirements with win-win solutions Commitment to ongoing professional development for yourself and others Our Commitment to You: An exciting career path with opportunities for continuous learning and development. Research oriented work, alongside award winning teams developing practical solutions for our nation's security Flexible schedules with every other Friday off work, if desired (9/80 schedule) Competitive benefits, including 401k matching, flex time off, paid parental leave, healthcare benefits, health & wellness programs, employee resource and social groups, and more See more at gdmissionsystems.com/careers/why-work-for-us/benefits Workplace Options: This position is Hybrid/Flexible. While on-site, you will be a part of the Pittsfield, MA location. #LI-Hybrid Salary Note This estimate represents the typical salary range for this position based on experience and other factors (geographic location, etc.). Actual pay may vary. This job posting will remain open until the position is filled. Combined Salary Range USD $115,000.00 - USD $120,000.00 /Yr. Company Overview General Dynamics Mission Systems (GDMS) engineers a diverse portfolio of high technology solutions, products and services that enable customers to successfully execute missions across all domains of operation. With a global team of 12,000+ top professionals, we partner with the best in industry to expand the bounds of innovation in the defense and scientific arenas. Given the nature of our work and who we are, we value trust, honesty, alignment and transparency. We offer highly competitive benefits and pride ourselves in being a great place to work with a shared sense of purpose. You will also enjoy a flexible work environment where contributions are recognized and rewarded. If who we are and what we do resonates with you, we invite you to join our high-performance team! Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans

Are you passionate about innovation? Are you excited at the opportunity to electrify and decarbonize the world? We operate with a founder's mindset. We deliver innovation with passion, speed, and courage. We continuously challenge our thinking and are empowered to dream big and take smart risks. Job Description If you have a passion for technology and want a career in engineering, we want you! As a Gas Power Co-op/Intern we will prepare you for an exciting career, tackling one of the world's toughest challenges of providing cleaner, more accessible energy. What You Will Do: * Receive technical training, mentorship, and coaching from world-class technologists and experienced technical managers * Grow your technical expertise in your chosen field and expand your skills in new areas. * Engineering interns in Gas Power experience technically challenging assignments in the power generation industry focusing on areas such as of Systems, Analysis, Design, Quality, Reliability, Digital, and Integration & Test. * Perform design and analysis of product lines in areas such as steam turbine, gas turbines, gas engines and generators Responsibilities include: Develop and implement new design concepts and design improvements. You may work with the drafting team to create or update the drawings, and partner with the manufacturing team to solve problems that arise out of the complex manufacturing processes required to make these parts. Potential Locations Include: * Greenville, South Carolina; Schenectady, New York; Atlanta, Georgia EMPLOYMENT DATES: * September - December 2026 (Fall) What you'll bring (Basic Qualifications) * Must have one to two semesters left prior to graduation and be enrolled in a full-time undergraduate or graduate program in an engineering discipline as listed below * The following majors are eligible: Aeronautical Engineering, Aerospace Engineering, Chemical Engineering, Electrical Engineering, Material Science Engineering, Mechanical Engineering. * Must maintain a minimum 3.0 cumulative GPA (without rounding). * Must have the ability to work in the United States for an unlimited amount of time without sponsorship What Will Make You Stand Out * Must be highly self-motivated and be able to work under minimal supervision * An analytical approach to problem solving with a high degree of curiosity. * Willingness and ability to learn from others. * Willingness to make and learn from mistakes. * Excellent organizational, written communication, and oral communication skills. * Demonstrated leadership and team player. * One who strives for academic excellence and shows great initiative. * Desire to work in a fast paced and agile environment. Benefits Available to you: Addressing the climate crisis is an urgent global priority, and at GE Vernova, we take our responsibility seriously. That is the singular mission of GE Vernova: to continue electrifying the world while simultaneously working to help decarbonize it. In order to meet this mission, we provide varied, competitive benefits to help support our workforce. The pay for this position ranges from $21.00/hr - $34.00/hr based on years of undergraduate/graduate field of study completed This position is also eligible for: * Relocation Assistance: Co-op/Interns will be reimbursed for reasonable, proper, and documented expenditures incurred while initially reporting to work and returning to school/home upon completion of the assignment. Employees with a permanent address greater than 50 miles away from the work location are eligible. * Housing Allowance: Co-op/Interns employees receive a weekly housing allowance to help off-set living expenses when the co-op/Intern's permanent residence is at least 50 miles away from the work location. * Employee Assistance Program, providing 24/7 confidential assessment, counseling and referral services * GE Retirement Savings Plan (RSP) after their accumulated service reaches 90 days, and they meet any other eligibility requirements as defined in the plans. (Eligibility occurs on the 1st of the month following the 90th day.) Inclusion At GE Vernova, we believe in the value of your unique identity, background and experiences. We are committed to fostering an inclusive culture, where everyone feels empowered to do their best work because they feel accepted, respected and that they belong. Click here to learn more: Our Culture | GE Vernova This posting will be open until at least July 18, 2025. General Electric Company, Ropcor, Inc., their successors, and in some cases their affiliates, each sponsor certain employee benefit plans or programs (i.e., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace, or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. Additional Information GE Vernova offers a great work environment, professional development, challenging careers, and competitive compensation. GE Vernova is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Vernova will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: No For candidates applying to a U.S. based position only: This posting is expected to remain open for at least seven days after it was posted on December 15, 2025. U.S. Internship roles are ineligible for GE Vernova benefits.

H2M architects + engineers, a multi-discipline architectural, engineering, and environmental consulting firm with multiple offices in NY & NJ seeks qualified interns to work closely with experienced professionals in our Water/Wastewater Engineering Division. The intern will be responsible for: General administrative tasks such as gathering and compiling data. Assisting project managers with construction drawings and specifications. Computer drafting using AutoCAD and Revit. Other duties as assigned. The ideal candidate will possess the following characteristics: Enrolled as a sophomore or higher in a Chemical, Civil, Environmental, or Mechanical Engineering or related field at an accredited institution. Strong computer skills in Microsoft Word, Excel, and AutoCAD. Eagerness to learn. Ability to work individually as well as in a team. What You'll Get out of it Program runs from June 1st - August 7th Ability to work on real life projects, go out into the field and build relationships with managers, co-workers and other interns Participate in fun and exciting workshops like resume writing, interviewing skills, benefits 101, Presentation Skills, etc. Celebrate National Intern Day! Top it off with presentations to your other fellow interns, managers and leadership team What's In it for You Build long lasting relationships with managers, co-workers and fellow interns Gain real life experience Learn how to promote yourself to apply for a full time job after graduation The hourly rate for this role is $18.00 - $23.00.

About GlobalFoundries GlobalFoundries (GF) is a leading full-service semiconductor foundry providing a unique combination of design, development, and fabrication services to some of the world's most inspired technology companies. With a global manufacturing footprint spanning three continents, GF makes possible the technologies and systems that transform industries and give customers the power to shape their markets. For more information, visit *********** Internship Program Overview: Our Interns & Co-ops are our entry-level talent pipeline for GF across the globe. Our goal is to provide students with a meaningful work experience that will equip them with the skills to embark on a career in the fast-paced and growing semiconductor industry after graduation. As an intern at GF, you'll experience one-on-one mentorship, work assignments that prioritize your growth and potential, professional development opportunities, and the chance to network with executives. Summary of Role: The GF AE intern will be involved in projects that directly affect our technical customer support, assess incoming technical cases, work with Application Engineers and other internal teams, and assist in driving internal solutions. This position offers an opportunity for customer interaction and exposure to different areas of the wafer manufacturing industry. Essential Responsibilities include: * Support customers and team members to resolve technical questions, which may involve debugging design, usage or design tool issues. * Participate in technical discussions with the PDK development and other GF teams to implement design enablement fixes and enhancements. * Write customer and internal training materials, knowledge articles and other technical documents. * Support with GF AE metric tracking. Other Responsibilities: * Perform all activities in a safe and responsible manner and support all Environmental, Health, Safety & Security requirements and programs. Required Qualifications: * Education - At least a sophomore at time of application and actively pursuing a Bachelor's, Master's, or PhD in Electrical, Computer Engineering or related field through an accredited degree program during the time of internship. * Must have at least an overall 3.0 GPA and be in good academic standing. * Language Fluency - English (Written & Verbal) * Ability to work at least 40 hours per week during the internship. Preferred Qualifications: * Prior related internship or co-op experience * Demonstrated prior leadership experience in the workplace, school projects, competitions, etc. * Project management skills, i.e., the ability to innovate and execute on solutions that matter; the ability to navigate ambiguity. * Strong written and verbal communication skills * Strong planning & organizational skills * IC design coursework or experience in analog and digital circuit design, microelectronics, HDL, signals & systems, advanced math, computer engineering/architecture, device physics and semiconductor fabrication * Competency in programming languages such shell scripting, Perl, Python, C/C++ #InternshipProgramUS Expected Salary Range $20.00 - $40.00 Expected Salary Range $0.00 - $0.00 The exact Salary will be determined based on qualifications, experience and location. If you need a reasonable accommodation for any part of the employment process, please contact us by email at usaccommodations@gf.com and let us know the nature of your request and your contact information. Requests for accommodation will be considered on a case-by-case basis. Please note that only inquiries concerning a request for reasonable accommodation will be responded to from this email address. An offer with GlobalFoundries is conditioned upon the successful completion of pre-employment conditions, as applicable, and subject to applicable laws and regulations. GlobalFoundries is fully committed to equal opportunity in the workplace and believes that cultural diversity within the company enhances its business potential. GlobalFoundries goal of excellence in business necessitates the attraction and retention of highly qualified people. Artificial barriers and stereotypic biases detract from this objective and may be illegally discriminatory. All policies and processes which pertain to employees including recruitment, selection, training, utilization, promotion, compensation, benefits, extracurricular programs, and termination are created and implemented without regard to age, ethnicity, ancestry, color, marital status, medical condition, mental or physical disability, national origin, race, religion, political and/or third-party affiliation, sex, sexual orientation, gender identity or expression, veteran status, or any other characteristic or category specified by local, state or federal law

The Senior Casting Technology Manufacturing Engineer provides technical leadership for SX or equiax investment castings across the value stream. You will partner with suppliers and cross-functional teams to drive root cause problem solving, improve producibility, increase productivity, and deliver on business objectives. You will own supplier technical relationships, coach on internal processes/specs/methods, qualify new suppliers, and help develop and industrialize alternate casting technologies. **Job Description** **Roles and Responsibilities** + Provide process and product technical leadership for the Castings commodity, including SX or equiax investment castings. + Develop strong working relationships with casting supplier technical teams. + Partner with suppliers to identify and implement corrective actions to eliminate the cause and prevent recurrence. + Act as a change agent to advance world-class performance and standard work across the supply base. + Own supplier technical relationships; mentor suppliers on GE Aerospace processes, specifications, and methods; ensure compliance and capability. + Lead cross-functional problem solving, to identify true root cause and implement sustainable corrective and preventive actions. + Improve manufacturability through design-for-casting, specification clarity, and process capability improvements. + Clearly communicate progress, risks, challenges, and countermeasures to leadership and stakeholders. + Review and approve significant/special processes; ensure adherence to standards and qualification requirements. + Collaborate with Quality and Design Engineering to ensure new and changed processes meet established metrics; align with other commodities on strategy and objectives + Partner with suppliers and internal teams to interpret drawings/specifications, ensuring conformance and clarity. + Identify and onboard new suppliers; lead technical qualifications and readiness through Manufacturing and Quality Planning reviews and support supplier Castings Audits. + Ability to travel to supplier sites 30%-50% **Minimum Required Qualifications** + Bachelor's degree in Engineering (Materials/Metallurgy, Mechanical, Manufacturing, or related field) + Minimum of 5 years of materials engineering, castings, mechanical engineering or a related field **Desired Characteristics and Experience** + Additive manufacturing experience. + Metal Injection Molding (MIM) experience. + Proficiency with Siemens NX or comparable CAD. + Sand Castings Experience. + Titanium Experience. + Significant experience in investment castings (SX or equiax), with demonstrated yield, capability, and cost improvements + Hands-on expertise across investment casting special processes (wax, shell, melt/solidification control, heat treat, HIP, NDT) and specification compliance. + Strong problem solving and project management skills. + New Product Introduction experience. + Experience maturing technologies and processes. + Excellent communication and stakeholder management; ability to influence without authority + Humble learner: Respectful, receptive to feedback, agile, and continuously improving; seeks out diverse perspectives. + Transparent communicator: Shares critical information proactively; speaks with candor; engages constructively to resolve issues. + Focused and accountable: Fast learner with strong ownership; meets commitments and drives results against SQDC targets ( _Safety, Quality, Delivery and Cost in that order)_ . **Pay and Benefits:** + The salary range for this position is $ 116,000.00 - 155,000.00. The specific salary offered to a candidate may be influenced by a variety of factors including the candidate's experience, their education, and the work location. In addition, this position is eligible for a performance bonus/variable incentive plan. + GE provides a comprehensive benefits package that provides access to plans which support the overall wellbeing of our employees and their dependents. These benefits include, but are not limited to, health care coverage (medical, dental, vision, pharmacy), a retirement plan that includes Company Retirement Savings and a 401K with Company matching, Life Insurance options, Disability coverage, paid time-off, EAP, and more. Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach, a 24/7 nurse-based resource; and access to the Employee Assistance Program, providing 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Retirement Savings Plan, a tax-advantaged 401(k) savings opportunity with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. General Electric Company, Ropcor, Inc., their successors, and in some cases their affiliates, each sponsor certain employee benefit plans or programs (i.e., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace, or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. GE Aerospace offers comprehensive benefits and programs to support your health and, along with programs like HealthAhead, your physical, emotional, financial and social wellbeing. Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach from GE Aerospace; and the Employee Assistance Program, which provides 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Aerospace Retirement Savings Plan, a 401(k) savings plan with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. GE Aerospace (General Electric Company or the Company) and its affiliates each sponsor certain employee benefit plans or programs (i.e., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. _This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3))._ **Additional Information** GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** No \#LI-Remote - This is a remote position GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

Essential Job Function: Engineering activities including design, CAD, planning, scheduling, and process troubleshooting. The position of Engineering Intern involves supporting Project Engineers with design, CAD, planning, coordination and controlling the functions of programs. This role ensures that goods and services are produced efficiently, of high quality, appropriate cost, on schedule, and to the satisfaction of the customer. The Engineering Assistant may also be involved with the following tasks: Assist in purchasing including generating and completing purchase orders, sending drawings to vendors, interaction with vendors to resolve any issues related to the purchase, manufacture, or delivery of the items, pick-up or drop-off of items, incoming inspection of items, and problem resolution. Direct and coordinate processes for production including the creation work orders and part programs. Operate research and production equipment when needed. Assist with CAD design & detailing of components. Work with Sales, customers, ADC personnel, and vendors to develop vendor or customer quotations. Develop schedules and production orders to make decisions concerning inventory requirements, staffing requirements, work procedures, considering budgetary limitations and time constraints. Review operations and confer with technical or admin staff to resolve production or processing problems. Initiate and coordinate inventory and cost control programs. Prepare and maintain production reports. Review plans and confer with research and support staff to develop new products and processes. General: Work Environment: Office Environment and Production floor Expected Hours: The position requires 40 hours per week. The employee is expected to work overtime as required to complete his/her job responsibilities. Education: Usually requires applicant is in pursuit of a 4-year engineering degree Special Skills or Characteristics: Able to work with little supervision, make decisions in a timely manner, and make efficient use of his/her time. Computer Skill Required: Microsoft Windows and Office (Word, Excel, Outlook, Project, etc.), CAD Authority: Make business related purchases of orders up to $250 before requiring further approvals as according to the Purchasing Procedure. Make design and engineering changes for products and processes. Salary: $20 - 25

MWI is a leading provider of engineered skid-mounted process systems and industrial controls for the power generation, oil & gas, nuclear, industrial and NavSea sectors. For over 35 years, Met Weld has supported global industry with a full line of services and capabilities, including integrated design, engineering, manufacturing and fabrication. Met Weld's manufacturing facility and Quality Assurance Programs deliver a controlled approach to each project and ensure the highest level of quality and service for our customers. Position Met Weld International ("MWI") is seeking a mechanical or electrical intern for the 2026 spring semester to join the activities of its Engineering Department. This position reports to the Engineering Manager in our Altamont, NY facility. Duties and Responsibilities Review and revise drawings as needed based on feedback from engineers, internal customer requests, customers, or project managers. Maintain and organize drawing files, records, and design documentation. Verify measurements and specifications to ensure drawings are accurate and complete. Performs other related duties as assigned in support of Business objectives and plans. Education Junior or Senior currently enrolled in an accredited 4-year college or university Engineering Program. Skills Hands-on individual with a strong mechanical or electrical aptitude. Basic understanding of technical drawing, blueprint reading, and design principles. Attention to detail with strong analytical, problem solving and conceptual thinking. Excellent mechanical and technical skills. Ability to be flexible, motivated, resourceful and organized in a multi-functional role. Solid communication, organization and time management skills. Design Software: Inventor and AutoCAD experience is a preference. Proficient with the Microsoft Suite (Excel, Word, PowerPoint) Physical Requirements: Prolonged periods sitting at a desk and working on a computer. Must be able to lift up to 15 pounds at a time. Must be able to access the shop floor to perform inspection of machinery to help assess and record as-built conditions of machinery and fabrication best practices. To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.

Arcadis is the world's leading company delivering sustainable design, engineering, and consultancy solutions for natural and built assets. We are more than 36,000 people, in over 70 countries, dedicated to improving quality of life. Everyone has an important role to play. With the power of many curious minds, together we can solve the world's most complex challenges and deliver more impact together. Role description: The Water Business Line is currently searching for interns to join our offices in Clifton Park, NY! The primary focus for this internship will be planning, design and construction administration for many project opportunities including: water, wastewater, stormwater and water management. Technical responsibilities will include; facilities planning, project design, permitting and construction administration activities as well as developing design reports and construction documents. Projects can involve facilities planning and design for treatment plants, pumping systems, pipelines, green infrastructure and flood protection. As a part of the design and engineering teams, you'll help to create some of the world's most iconic and ground-breaking structures and spaces that transform the world around us, from making journeys easier to opening up public places that bring people together. Role accountabilities: As a Water Engineer Intern, you will have the opportunity to work on various aspects of water/wastewater/stormwater treatment and conveyance projects. This will include involvement in planning, process evaluations, detailed design, and construction administration. Your role may also require fieldwork such as conducting site visits, observing construction activities, collecting samples, analyzing water quality data, evaluating technologies and plant operations, troubleshooting processes, and optimizing operations. Additionally, you will be responsible for conducting condition assessments and overall performance evaluations of water/wastewater/stormwater facilities. Strong communication skills (both oral and written) are essential in this role as you will be working closely with staff and clients. You will also need to demonstrate client-facing skills including preparing and delivering effective presentations, participating in client meetings, and interacting with clients and subcontractors in the field. In addition to the responsibilities mentioned above, you will also be accountable for: * Ability to work on multiple, unique assignments simultaneously, as well as strong organizational, analytical and problem solving skills. * Self-motivated, team-oriented and flexible individual must possess the initiative and ability to take on new projects and other challenges regularly. * Exercise judgment on details of work and in making preliminary selections and adaptations of engineering alternatives. Qualifications & Experience: Required Qualifications * Pursuing a degree in Civil or Environmental Engineering or closely related field. * Local candidates given preference - relocation assistance not available for this position. Preferred Qualifications * Prior internship experience. Why Arcadis? We can only achieve our goals when everyone is empowered to be their best. We believe everyone's contribution matters. It's why we are pioneering a skills-based approach, where you can harness your unique experience and expertise to carve your career path and maximize the impact we can make together. You'll do meaningful work, and no matter what role, you'll be helping to deliver sustainable solutions for a more prosperous planet. Make your mark, on your career, your colleagues, your clients, your life and the world around you. Together, we can create a lasting legacy. Join Arcadis. Create a Legacy. Our Commitment to Equality, Diversity, Inclusion & Belonging We want you to be able to bring your best self to work every day which is why we take equality and inclusion seriously and hold ourselves to account for our actions. Our ambition is to be an employer of choice and provide a great place to work for all our people. We are an equal opportunity and affirmative action employer. Women, minorities, people with disabilities and veterans are strongly encouraged to apply. We are dedicated to a policy of non-discrimination in employment on any basis including race, creed, color, religion, national origin, sex, age, disability, marital status, sexual orientation, gender identity, citizenship status, disability, veteran status, or any other basis prohibited by law. Arcadis offers benefits for part-time, as needed positions. These benefits include EAP, 401K, and optional well being benefits. The salary range for this position is $20.65 - $30.98 / per hour. #LI-TB1 #EarlyCareersANA #Resilience-ANA #WATER-ANA #LI-HYBRID #SWE #WEPAN #AWIS #INWES #BWEC #NSBE #SHPE #AISES #oSTEM #SAME #SASE

See it differently You see the world through a unique lens and that's exactly what we need. We embrace how you see things differently - it's essential for creating a sustainable future. Arup is a global consultancy with advisory and technical expertise across more than 150 disciplines. We guide, plan and design the future of the built environment. Globally, each year we recruit hundreds of interns to help us see things differently and solve the most complex challenges facing our clients, climate and communities. The Opportunity * Design of Plumbing and Fire Protection systems within the built environment, with an emphasis on sustainable design * Support designing plumbing systems such as domestic water, sanitary/vent, and storm systems * Support designing fire protection systems fire sprinkler and standpipe systems * Collaborate with clients, architects, engineers, and consultants to develop integrated solutions for complex buildings * Undertaking and documenting engineering analysis work, including code research, load calculations, and equipment sizing, in a clear manner * Document system design in Revit MEP * Communicate technical ideas to a broad range of audiences using various formats, including presentations and workshops * Write reports documenting calculation methods and results, design assumptions, and other technical information * The ability to prioritize effectively, balance assigned work and exceptional organization skills required for our changing environment * Influence with design on sustainable outcome for our clients to align with Arup sustainability commitment * Assisting in construction administration activities such as site visits and submittal reviews Is this role right for you? Required * Pursuing a Bachelor's Degree in mechanical, architectural, civil, or environmental engineering * Coursework in fluid hydraulics/piping/fluid dynamics * Shown interest in the built environment and sustainable development * Ability to collaborate with clients * Good time management habits, ability to multi-task, ability to sustain focus on long tasks * Ability to communicate thoughts and technical ideas in an accessible way * Attitude of taking initiative, enthusiasm, eagerness to learn, teamwork, creativity * Ability to prioritize effectively, balance assigned work and exceptional organization skills required for our changing environment * Strong interpersonal and communication skills needed for team-based working * Presentation skills with colleagues and clients of all levels * Must be eligible to work in the United States without the need for employer sponsored work authorization now or in the future. Preferred * EIT/ FE certification * Membership in ASPE, ASSE, ASHRAE, NFPA, or SFPE * Courses in sustainability or USGBC participation * Revit or 3D modeling experience * Internship experience in engineering-related firm or evidence of extracurricular activity in the field * Shown ability to perform in a paid work environment with intermittent supervision * Past history of technical presentations and technical writing * Computer programming languages (e.g., Dynamo, Python, Grasshopper) We're looking for: * Changemakers: A passion for sustainable development and creating a better world is key. * Innovative minds: We're looking for critical thinkers who embrace new ideas and challenge the status quo. * Growth seekers: You have a growth mindset, always eager to learn and explore new ways of working. * Adaptable adventurers: You're ready to take on any challenge that comes your way. What we offer you At Arup, we care about each member's success, so we can grow together. Our intern experience offers you: * Purpose-driven work: Join an employee-owned team tackling climate, biodiversity, and social challenges, aligned with the UN's Sustainable Development Goals. * Create remarkable outcomes: We trust you to explore challenges, drive change, and create lasting outcomes for our clients, climate and communities. * Inclusive culture: Your unique perspective matters. We celebrate diversity and foster a supportive, social environment where everyone belongs. * Career growth: Grow your skills through innovative projects, training, and mentoring in a supportive environment. We invest in your future. * Work-life balance: Our hybrid model offers flexibility to balance work with your life. We balance your needs with our clients and communities Washington DC Hiring Range - The good faith base salary hiring range for this job if performed in Washington DC is $24.00 to $43.50 per hour. This range is commensurate with experience, educational background, and skill level. Benefits are not included in the base salary. Please note hiring ranges for candidates performing work outside of Washington DC will differ. Next Steps We will be reviewing our candidates for this position on a rolling basis. Once you've submitted your application, we'll invite you to showcase your skills through a pre-recorded video interview if you've met the minimum requirements. After reviewing your submission, a member of our team will get in touch with you to discuss the next steps. Arup is an equal opportunity employer. All qualified applicants will receive consideration without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, spouse of a protected veteran, or disability. Stay safe online. Recruitment fraud is on the rise, and Arup's name, logo, and branding have been used in fraudulent job advertisements. Arup will never ask for bank information as part of our recruitment process. Different people, shared values Arup is an equal opportunity employer that actively promotes and nurtures a diverse and inclusive workforce. We welcome applications from individuals of all backgrounds, regardless of age (within legal limits), gender identity or expression, marital status, disability, neurotype or mental health, race or ethnicity, faith or belief, sexual orientation, socioeconomic background, and whether you're pregnant or on family leave. We are an open environment that embraces diverse experiences, perspectives, and ideas - this drives our excellence. Guided by our values and alignment with the UN Sustainable Development Goals, we create and contribute to equitable spaces and systems, while cultivating a sense of belonging for all. Our internal employee networks support our inclusive culture: from race, ethnicity and cross-cultural working to gender equity and LGBTQ+ and disability inclusion - we aim to create a space for you to express yourself and make a positive difference. Discover more about life at Arup at *************************************** #goarup #LI-DF1

Are you ready to power up your future and make a real impact on the world? We are X-ELIO, a Brookfield-owned company and a global leader in the renewable energy sector; with over 3 GW of renewable projects (solar/BESS) built, we currently operate in 12 countries and have a development pipeline of 12 GW of solar and 14 GW of BESS capacity. and we are looking for you! What's This Role About? You'll dive into the heart of our projects, helping us bring solar and storage projects to life. You'll work alongside our Interconnection and Engineering teams, learning how renewable projects connect to the grid, solving real-world challenges, and helping design smarter, greener systems. What You'll Do: * Keep project data organized and up-to-date for our Interconnection and Design teams. * Help review utility reports (don't worry, we'll teach you!), system impact studies, and interconnection agreements. * Learn how electricity grids work - and how we plug our clean energy into them. * Analyze transmission and grid capacity - key to making renewable projects possible! * Support internal teams and work with external consultants to tackle technical challenges. * Participate in project meetings with utilities, development, engineering, construction, and operations teams. * Grow your skills in MS Excel, PSSE, ETAP, PowerWorld, and other top engineering tools. * Get first-hand experience with ISO/RTO interconnection processes across the U.S. What We're Looking For: * Pursuing a Bachelor's or Graduate degree in Electrical & Computer Engineering (Power Systems focus is a plus). * Curious, motivated, and ready to learn fast. * Strong skills in MS Office, especially Excel. * Bonus points if you know tools like PSSE, ETAP, PowerWorld, or PSLF. * Basic understanding of how electric grids work = awesome!

Who we are ✨ Snackpass's mission is to unify the physical and digital world for local commerce. We power mobile order pickup and social commerce for restaurants, modernizing the customer experience while making restaurant operators successful. Opportunity ✨ Snackpass is one of the fastest growing marketplaces (a16z top marketplaces), and a top 100 YC company. We are backed by Andreeson Horowitz, Y Combinator, General Catalyst, First Round Capital, Craft Ventures and many others. We are hiring people who are humble and hungry to join us in any of our hubs (NYC, SF, LA) or remotely. Our vision is to be the dominant platform for pickup, a $750B market globally. About the Role ✨ You are a product-driven software engineer excited to work on applied AI during your upcoming internship! You'll join the AI Products team at Snackpass, building features that bring machine learning and intelligent automation to restaurants and small businesses. Working in a fast-paced startup environment alongside talented engineers, you'll gain hands-on experience with modern AI applications and product development in a short time. What We're Looking For Student pursuing or achieving a BS / MS / PhD in Computer Science, Data Science, or related fields. Alignment with our values: hungry and humble. Strong programming skills in Python or JavaScript (experience with frameworks like PyTorch, TensorFlow, or modern JS libraries a plus). Familiarity with SQL and/or NoSQL databases. Interest in applying LLMs, NLP, or recommender systems to real-world problems. Experience using AI-assisted coding tools (e.g., Cursor, GitHub Copilot, or similar) to accelerate development. Strong communication and collaboration skills. Bonus: contributions to open source projects, or past work beyond coursework. At Snackpass, You Will: Build and ship features as part of the AI Products engineering team. Work on projects that may include: application UX, AI-driven logic, data pipelines, or partner integrations. Use our tech stack, which includes React.js, Node.js (+Typescript), MongoDB, and modern ML frameworks. Write and maintain high-quality tests (unit and end-to-end) for your features. Contribute to evolving our internal AI tools and engineering processes as we scale. Details: Start date: October or January (flexible based on your schedule) Duration: 10-12+ weeks 20+ Hours a week On-site in New York City (NOHO) What You Will Get From Us: You will receive competitive compensation, a generous equity grant in a high-growth start-up, and benefits like healthcare, medical & dental coverage, unlimited PTO, a home office budget, wellness budget and more. Importantly, you will also receive an unparalleled amount of ownership over the work you do here. We are a small team, so the opportunity to make a large impact, work on a broad spectrum of challenges and grow your personal skill-set awaits you here. Finally, you will get a diverse and inclusive work environment where you will be surrounded by hungry and humble colleagues. Snackpass is an equal opportunity employer and we value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. In fact, we are confident that the most inclusive and diverse teams accomplish the most extraordinary results.

Project Engineer will assist with design development of commercial, institutional and residential related projects. Design experience should include layout, grading, water, wastewater, stormwater and other infrastructure facilities. Occasional field visits for purposes of investigations and construction phase support services. Essential Job Functions: Site design and layout of vehicular and pedestrian circulation, parking and loading. Roadway design, including street and sidewalk plans and profiles. Utility design, including plans and profiles of water and sanitary sewer services. Drainage and stormwater management design in accordance with NYSDEC requirements. Grading and erosion control plans. Proficiency with AutoCad/Civil 3D to assemble and manage AutoCAD set of design plans. Coordinate with subconsultants regarding geotechnical services, landscape and lighting plans. Construction administration and observation services. Assist with developing application packages to be submitted to municipal board for review that comply with the following: SEQR review, including compliance with SEQR procedural requirements. State and Federal environmental laws. Local zoning, subdivision and land use regulations. Local and generally accepted design and engineering standards. Consistency with a municipality's Comprehensive Plan or other relevant Planning reports Oversight of entry level Assistant Project Engineers and technicians including, but not limited to, delegation of tasks, promoting quality standards, scheduling and coordinating of project deliverables. Job Requirements: Bachelor's degree in civil engineering from an ABET accredited institution. A Professional Engineer (P.E.) license in New York State or ability to obtain is required. 5-10 years of experience in a similar role. Excellent verbal and written communication skills are required. Strong organizational skills are required. Proficient with AutoCAD/Civil 3D software preferred. Ability to multi-task and work under pressure in a fast-paced environment. Ability to work efficiently, both independently and in a team environment. Knowledge of construction methods of general excavation, pavement and utility installation. Knowledge of federal, state and local permitting and the process involved. Ability to verbally present site plans and reports to municipal land-use boards. Contribute to a Project Manager's preparation of proposal scope & fees. Knowledge is a plus for hydrologic and hydraulic modeling and design of stormwater management systems. Certifications in CPESC and CPSWQ is a plus. Pay Range: Albany - $44/hour - $60/hour Poughkeepsie - $44/hour - $63/hour Westchester - White Plains - $47/hour - $66/hour Pay is based on applicant's ability/experience and will be rated accordingly. EXTRAs At Creighton Manning, continuous learning and mentoring are part of our DNA. There are opportunities to advance your career, either on the technical track towards Project Manager or into various corporate leadership positions. Team members get 360 reviews with input from peers and managers, to get a broad picture of their contributions. Qualifications EducationBachelors of Engineering (required) ExperienceProficient with AutoCAD/Civil 3D software (preferred) 5 - 10 years: Experience in a similar role. (required) Licenses & CertificationsProfessional Engineer (required) Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Basic Qualifications Requires a Bachelor's or Technology degree in Engineering or a related specialized area/field, or equivalent (4 years job-related experience). Requires an additional 2+ years of job-related experience, or a Master's degree. CLEARANCE REQUIREMENTS: Department of Defense Secret security clearance is preferred at time of hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position Put your engineering talent to the ultimate test. At General Dynamics Mission Systems, we create the technologies, products and services that help our service members, intelligence analysts and first responders keep our nation safe. The work we do is so advanced our teams often redefine what's possible for the world. If you want to be a leader with the company that delivers smart solutions for our nation's challenges, this is your opportunity. We apply advanced technologies such as Artificial Intelligence, Blockchain, AR/VR, Cloud Native and Quantum Physics to solve our customers' missions in cyber, RF, undersea, interstellar and everything in between. In our highly collaborative and global environment, you'll analyze the effects of projects upon various areas such as Engineering, Facilities, and the labor pool to determine the most practical and cost-efficient methods to obtain the required resources and participate in the tactical planning for completion of identified project segment. Essentially, you'll perform research and engineering laboratory functions involving the layout, building, testing, troubleshooting, and repairing devices, assemblies, subsystems, and systems as well as perform technical activities which impact the proposal, system level design, detail design and manufacture of advanced electronics systems. As an Engineering Support Specialist - Trident II (Sr Engr Support Spec) for the D5LE2 program, you'll be a member of a cross functional team responsible for developing, modeling, and coordinating requirements for the next generation Fire Control System. Other responsibilities include systems design and Integration/Test. What sets you apart: MagicDraw Modeling D5LE2 missile or SLBM experience FCS experience Columbia-class or Ohio-class submarine experience Success leading the systems development life cycle with strong proficiency with requirements management and system modeling tools Creative thinker motivated to apply technical standards and methodologies to develop solutions Collaborative team player with the ability to provide technical leadership and position others for success Strong presentation and communications skills with experience in the art of negotiation and the ability to meet challenging customer requirements with win-win solutions Commitment to ongoing professional development for yourself and others Our Commitment to You: An exciting career path with opportunities for continuous learning and development. Research oriented work, alongside award winning teams developing practical solutions for our nation's security Flexible schedules with every other Friday off work, if desired (9/80 schedule) Competitive benefits, including 401k matching, flex time off, paid parental leave, healthcare benefits, health & wellness programs, employee resource and social groups, and more See more at gdmissionsystems.com/careers/why-work-for-us/benefits Workplace Options: This position is fully on-site or Hybrid/Flex. While on-site, you will be a part of the Building 130 facility in Pittsfiled, MA 01201. We are not offering a relocation package at this time. #LI-Hybrid Salary Note This estimate represents the typical salary range for this position based on experience and other factors (geographic location, etc.). Actual pay may vary. This job posting will remain open until the position is filled. Combined Salary Range USD $86,091.00 - USD $93,154.00 /Yr. Company Overview General Dynamics Mission Systems (GDMS) engineers a diverse portfolio of high technology solutions, products and services that enable customers to successfully execute missions across all domains of operation. With a global team of 12,000+ top professionals, we partner with the best in industry to expand the bounds of innovation in the defense and scientific arenas. Given the nature of our work and who we are, we value trust, honesty, alignment and transparency. We offer highly competitive benefits and pride ourselves in being a great place to work with a shared sense of purpose. You will also enjoy a flexible work environment where contributions are recognized and rewarded. If who we are and what we do resonates with you, we invite you to join our high-performance team! Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans

Are you passionate about innovation? Are you excited at the opportunity to electrify and decarbonize the world? We operate with a founder's mindset. We deliver innovation with passion, speed, and courage. We continuously challenge our thinking and are empowered to dream big and take smart risks. **Job Description** If you have a passion for technologyand want a career in engineering, we want you! As a Gas Power Co-op/Intern we will prepare you for an exciting career, tackling one of the world's toughest challenges of providing cleaner, more accessible energy. **What You Will Do:** + Receive technical training, mentorship, and coaching from world-class technologists and experienced technical managers + Grow your technical expertise in your chosen field and expand your skills in new areas. + Engineering interns in Gas Power experience technically challenging assignments in the power generation industry focusing on areas such as of Systems, Analysis, Design, Quality, Reliability, Digital, and Integration & Test. + Perform design and analysis of product lines in areas such as steam turbine, gas turbines, gas engines and generators **Responsibilities include** : Develop and implement new design concepts and design improvements. You may work with the drafting team to create or update the drawings, and partner with the manufacturing team to solve problems that arise out of the complex manufacturing processes required to make these parts. **Potential Locations Include:** + Greenville, South Carolina; Schenectady, New York; Atlanta, Georgia **EMPLOYMENT DATES:** + May/June to August 2026 (Summer) **What you'll bring (Basic Qualifications)** + Must have one to two semesters left prior to graduation and be enrolled in a full-time undergraduate or graduate program in an engineering discipline as listed below + The following majors are eligible: **Aeronautical Engineering, Aerospace Engineering, Chemical Engineering, Electrical Engineering, Material Science Engineering, Mechanical Engineering** . + **Must maintain a minimum 3.0 cumulative GPA (without rounding).** + Must have the ability to work in the United States for an unlimited amount of time without sponsorship **What Will Make You Stand Out** + Must be highly self-motivated and be able to work under minimal supervision + An analytical approach to problem solving with a high degree of curiosity. + Willingness and ability to learn from others. + Willingness to make and learn from mistakes. + Excellent organizational, written communication, and oral communication skills. + Demonstrated leadership and team player. + One who strives for academic excellence and shows great initiative. + Desire to work in a fast paced and agile environment. **Benefits Available to you:** Addressing the climate crisis is an urgent global priority, and at GE Vernova, we take our responsibility seriously. That is the singular mission of GE Vernova: to continue electrifying the world while simultaneously working to help decarbonize it. In order to meet this mission, we provide varied, competitive benefits to help support our workforce. The pay for this position ranges from $21.00/hr - $34.00/hr based on years of undergraduate/graduate field of study completed This position is also eligible for: + **Relocation Assistance:** Co-op/Interns will be reimbursed for reasonable, proper, and documented expenditures incurred while initially reporting to work and returning to school/home upon completion of the assignment. Employees with a permanent address greater than 50 miles away from the work location are eligible. + **Housing Allowance:** Co-op/Interns employees receive a weekly housing allowance to help off-set living expenses when the co-op/Intern's permanent residence is at least 50 miles away from the work location. + **Employee Assistance Program,** providing 24/7 confidential assessment, counseling and referral services + **GE Retirement Savings Plan (RSP** )after their accumulated service reaches 90 days, and they meet any other eligibility requirements as defined in the plans. (Eligibility occurs on the 1st of the month following the 90th day.) **Inclusion** At GE Vernova, we believe in the value of your unique identity, background and experiences. We are committed to fostering an **inclusive** **culture** , where everyone feels empowered to do their best work because they feel accepted, respected and that they belong. Click here to learn more:Our Culture | GE Vernova (**************************************************** **This posting will be open until at least July 18, 2025.** _General Electric Company,_ _Ropcor_ _, Inc., their successors, and in some cases their affiliates, each sponsor certain employee benefit plans or programs (i.e., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace, or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual._ **Additional Information** GE Vernova offers a great work environment, professional development, challenging careers, and competitive compensation. GE Vernova is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Vernova will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** No For candidates applying to a U.S. based position only: This posting is expected to remain open for at least seven days after it was posted on December 18, 2025. U.S. Internship roles are ineligible for GE Vernova benefits. GE Vernova is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

GlobalFoundries (GF) is a leading full-service semiconductor foundry providing a unique combination of design, development, and fabrication services to some of the world's most inspired technology companies. With a global manufacturing footprint spanning three continents, GF makes possible the technologies and systems that transform industries and give customers the power to shape their markets. For more information, visit *********** Internship Program Overview: Our Interns & Co-ops are our entry-level talent pipeline for GF across the globe. Our goal is to provide students with a meaningful work experience that will equip them with the skills to embark on a career in the fast-paced and growing semiconductor industry after graduation. As an intern at GF, you'll experience one-on-one mentorship, work assignments that prioritize your growth and potential, professional development opportunities, and the chance to network with executives. Summary of Role: GlobalFoundries Fab 8 is seeking a New College Grad to support the 300mm semiconductor technology development integration team. The core responsibilities of this team involve ownership of process integration of Silicon Photonic devices from development, customer engagement to production. The ideal candidate can demonstrate a technical understanding of Silicon Photonics and an understanding of a balanced scorecard approach to develop, sustain, and improve the technologies with quality, cost, and delivery all considered. Essential Responsibilities include: Responsible for developing/qualifying silicon photonics process flows and process integrations to enable meeting the product requirements for performance, reliability and defect free manufacturing. Ensure methods and processes in place to test the devices and structures being developed Develops and implements methods and procedures for process control and inspection to ensure that the products are free of flaws and function as designed Analyzes reports and defective products to determine trends and recommend corrective actions. Responsible to freeze developed processes in preparation for manufacturing and drive technology cost reduction & process convergence. Customer engagement through reporting issues, status and milestones Work and collaborate other projects and/or assignments as needed Other Responsibilities: Perform all activities in a safe and responsible manner and support all Environmental, Health, Safety & Security requirements and programs. Required Qualifications: Education - At least a sophomore at time of application and actively pursuing a Photonics, Optics, Electrical Engineering, Electronics Engineering, Microsystems, Engineering, Physics, Materials Science, or other related engineering physical science disciplines. Must have at least an overall 3.0 GPA and be in good academic standing. Language Fluency - English (Written & Verbal) Ability to work at least 40 hours per week during the internship. Preferred Qualifications: Prior related internship or co-op experience Demonstrated prior leadership experience in the workplace, school projects, competitions, etc. Project management skills, i.e., the ability to innovate and execute on solutions that matter; the ability to navigate ambiguity. Strong written and verbal communication skills Strong planning & organizational skills #InternshipProgramUS Expected Salary Range $20.00 - $40.00 Expected Salary Range $0.00 - $0.00 The exact Salary will be determined based on qualifications, experience and location. If you need a reasonable accommodation for any part of the employment process, please contact us by email at usaccommodations@gf.com and let us know the nature of your request and your contact information. Requests for accommodation will be considered on a case-by-case basis. Please note that only inquiries concerning a request for reasonable accommodation will be responded to from this email address. An offer with GlobalFoundries is conditioned upon the successful completion of pre-employment conditions, as applicable, and subject to applicable laws and regulations. GlobalFoundries is fully committed to equal opportunity in the workplace and believes that cultural diversity within the company enhances its business potential. GlobalFoundries goal of excellence in business necessitates the attraction and retention of highly qualified people. Artificial barriers and stereotypic biases detract from this objective and may be illegally discriminatory. All policies and processes which pertain to employees including recruitment, selection, training, utilization, promotion, compensation, benefits, extracurricular programs, and termination are created and implemented without regard to age, ethnicity, ancestry, color, marital status, medical condition, mental or physical disability, national origin, race, religion, political and/or third-party affiliation, sex, sexual orientation, gender identity or expression, veteran status, or any other characteristic or category specified by local, state or federal law

Arcadis is the world's leading company delivering sustainable design, engineering, and consultancy solutions for natural and built assets. We are more than 36,000 people, in over 70 countries, dedicated to improving quality of life. Everyone has an important role to play. With the power of many curious minds, together we can solve the world's most complex challenges and deliver more impact together. Role description: The Water Business Line is currently searching for interns to join our offices in Clifton Park, NY! The primary focus for this internship will be planning, design and construction administration for many project opportunities including: water, wastewater, stormwater and water management. Technical responsibilities will include; facilities planning, project design, permitting and construction administration activities as well as developing design reports and construction documents. Projects can involve facilities planning and design for treatment plants, pumping systems, pipelines, green infrastructure and flood protection. As a part of the design and engineering teams, you'll help to create some of the world's most iconic and ground-breaking structures and spaces that transform the world around us, from making journeys easier to opening up public places that bring people together. Role accountabilities: As a Water Engineer Intern, you will have the opportunity to work on various aspects of water/wastewater/stormwater treatment and conveyance projects. This will include involvement in planning, process evaluations, detailed design, and construction administration. Your role may also require fieldwork such as conducting site visits, observing construction activities, collecting samples, analyzing water quality data, evaluating technologies and plant operations, troubleshooting processes, and optimizing operations. Additionally, you will be responsible for conducting condition assessments and overall performance evaluations of water/wastewater/stormwater facilities. Strong communication skills (both oral and written) are essential in this role as you will be working closely with staff and clients. You will also need to demonstrate client-facing skills including preparing and delivering effective presentations, participating in client meetings, and interacting with clients and subcontractors in the field. In addition to the responsibilities mentioned above, you will also be accountable for: Ability to work on multiple, unique assignments simultaneously, as well as strong organizational, analytical and problem solving skills. Self-motivated, team-oriented and flexible individual must possess the initiative and ability to take on new projects and other challenges regularly. Exercise judgment on details of work and in making preliminary selections and adaptations of engineering alternatives. Qualifications & Experience: Required Qualifications Pursuing a degree in Civil or Environmental Engineering or closely related field. Local candidates given preference - relocation assistance not available for this position. Preferred Qualifications Prior internship experience. Why Arcadis? We can only achieve our goals when everyone is empowered to be their best. We believe everyone's contribution matters. It's why we are pioneering a skills-based approach, where you can harness your unique experience and expertise to carve your career path and maximize the impact we can make together. You'll do meaningful work, and no matter what role, you'll be helping to deliver sustainable solutions for a more prosperous planet. Make your mark, on your career, your colleagues, your clients, your life and the world around you. Together, we can create a lasting legacy. Join Arcadis. Create a Legacy. Our Commitment to Equality, Diversity, Inclusion & Belonging We want you to be able to bring your best self to work every day which is why we take equality and inclusion seriously and hold ourselves to account for our actions. Our ambition is to be an employer of choice and provide a great place to work for all our people. We are an equal opportunity and affirmative action employer. Women, minorities, people with disabilities and veterans are strongly encouraged to apply. We are dedicated to a policy of non-discrimination in employment on any basis including race, creed, color, religion, national origin, sex, age, disability, marital status, sexual orientation, gender identity, citizenship status, disability, veteran status, or any other basis prohibited by law. Arcadis offers benefits for part-time, as needed positions. These benefits include EAP, 401K, and optional well being benefits. The salary range for this position is $20.65 - $30.98 / per hour. #LI-TB1 #EarlyCareersANA #Resilience-ANA #WATER-ANA #LI-HYBRID #SWE #WEPAN #AWIS #INWES #BWEC #NSBE #SHPE #AISES #oSTEM #SAME #SASE

Join the Creighton Manning team, a GAI Consultants Company... We are seeking an experienced Structural Project Engineer for bridge and other transportation-related projects to join our consulting firm in Albany, Poughkeepsie, Syracuse, or White Plains, New York. About This Position: A Project Engineer functions as a fully competent engineer in all aspects of the subject matter of assignments. Develops and evaluates plans and criteria for a variety of projects and activities to be carried out by junior staff. Assess the feasibility and soundness of proposal preparation. Generally performs as a staff advisor and consultant as to a technical specialty or a program function. Typical projects include bridge and culvert rehabilitations and replacements, retaining wall design, miscellaneous structural design for transportation infrastructure, and construction engineering support. Project Engineers often require efforts outside normal business hours to meet client requests and/or attend meetings. The ideal candidate will have: Experience progressing transportation infrastructure design projects in New York State including culvert and bridge replacement or rehabilitation projects Strong organizational skills and an ability to manage multiple assignments and meet deadlines Strong communication, presentation, and client relation skills - both verbal and written Responsibilities include: Ability to prepare or check calculations and/or direct the design procedures of others to ensure that calculations are in accordance with AASHTO and NYSDOT design standards. Prepare Design Reports, specifications, plans, studies, permits, and designs for various bridge design projects. Develop plan details for bridge replacement and rehabilitation projects in accordance with NYSDOT Standards. Work within assigned task scope and budget, and coordinate with client and team to develop effective and efficient solutions. Perform structural analysis and/or stability review of existing/new bridges/structures for proposed construction loading and temporary conditions. Development of demolition/erection sequence plans; including the stability analysis of the structure during each of the different stages of construction. Analysis and design of temporary shoring towers/systems for both gravity and lateral loads. Design/Detailing of hydraulic jacking and structural lifting systems. Development of Crane Pick Plans; including geometry and feasibility studies, Site Logistics, crane sizing and capacity checks, design of load distribution mats, custom rigging. Serves as Project Engineer with autonomy for project related tasks and as a designated client contact. May have responsibilities on multiple projects. Essential Job Functions: Plan, schedule, conduct or coordinate detailed phases of engineering work. Plan and conduct work requiring judgment and independent evaluation. Apply standard technology and procedures. Conduct analysis choosing appropriate applications. Anticipate bigger project objectives. Complete complex engineering assignments. Review cost and quantity estimating prepared by others. Attend project meetings and presents specific aspects of engineering assignments. Responsible for report writing for all complexity of projects. Assume client relations for routine basic projects. Provide delegation and supervision of Engineer I/II/III's and Technicians. Provide coordination for multi-discipline projects. Provide direction on technical guidance for complex problems. QC/Peer review. Oversee quality and standards. Serve as a consultant and technical leader on proposals and projects. Provide technical guidance and strategy assistance in the development of design and/or planning proposals and concepts. Develop innovative approaches to solve technical issues within the constraints of fiscal realities. Seek technical challenges and troubleshoot technical issues on projects. Capable to review product documents for technical quality assurance and compliance with standards. Job Requirements: Bachelor's degree in engineering from an ABET/EAC accredited program or an approved equivalent. 5-10 years of experience in a similar engineering role. Professional Engineering (P.E.) licensure in NY or ability to obtain reciprocal licensure. Hourly Pay Range: Albany, NY, Poughkeepsie, NY, Syracuse, NY and White Plains, NY: $49.00/hour - $65.00/hour Pay is based on applicant's ability/experience and labor market, and will be rated accordingly. EXTRAs At Creighton Manning, continuous learning and mentoring are part of our DNA. There are opportunities to advance your career, either on the technical or management track, and employees are encouraged to participate in our mentoring program to help them navigate their career. #INDHP Qualifications EducationBachelors of Engineering (required) Experience5 - 10 years: Related Experience (required) Licenses & CertificationsDriver's License (required) Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.