Engineering associate jobs in Webb City, MO - 1,613 jobs

All

Engineering Associate

Manufacturing Engineer

Project Engineer

Engineering Specialist

Engineering Internship

Product Engineer

Field Engineer

Engineering Technician

Design Development Engineer

Mechanical Engineer

Manufacturing Engineering Technician

Engineering Specialist (Flex Staff)
CDM Smith 4.8
Engineering associate job in Fort Smith, AR
CDM Smith is seeking Engineers to support Federal Construction Projects with agencies such as USACE, AFCEC, and NAVFAC. This is a pipeline requisition for future projects. The Engineering Specialist applies broad professional knowledge of engineering principles to solve complex technical challenges and ensure compliance with federal construction standards to meet specific client needs. Work is performed independently under limited supervision, requiring initiative, sound engineering judgement, and the ability to communicate effectively with a variety of stakeholders including contractors, government clients, and multidisciplinary project teams. Job Duties: - Serve as the technical liaison between federal government client design branch, construction branch, and contractors. - Review design submittals, shop drawings, specifications, RFIs, and technical reports for compliance with Federal and client specific standards. - Apply engineering principles and relevant codes across planning, investigation, design review, construction administration, , and assessment of engineering procedures, structures, systems, and tools - Monitors progress and prepares technical reports and/or project status reports. - Provide engineering judgment for field modifications, non-conformance issues, value engineering proposals, and constructability reviews. - Complies with guidelines and regulations including permitting, safety protocols, environmental requirements, etc. and delivers technical files and other technical documentation as required. - Assist in the development of cost estimates and supporting analysis in coordination with government cost estimators and contracting officers. - Participate in pre-construction meetings, progress reviews, and project closeout/punchlist activities. - Conduct or assists in quality assurance reviews to ensure compliance with contract requirements. - Develops, trains, mentors junior engineering staff while guiding technical direction and best practices. - Develop and maintain client relationships through responsive communication and strong technical support. Serves as a liaison with clients. - Performs other duties as required. \#LI-LP2 **Job Title:** Engineering Specialist (Flex Staff) **Group:** FSI ENT WFT Field **Employment Type:** Temporary **Minimum Qualifications:** - Bachelor's degree in Engineering. - At least 5 years of relevant experience. Domestic travel is required. Overseas travel is also possible. **Preferred Qualifications:** - PE (Professional Engineer) License or RA (Registered Architect) is highly preferred. - Construction Quality Management (CQM) for Contractors certificate. - OSHA 30-Hour Construction Safety. - Federal or DoD project experience (NAVFAC, USACE, or Air Force CE) is highly desirable. - Experience across vertical construction (buildings/facilities) and horizontal work (utilities, waterfronts, transportation, or airfields) - Proficiency in interpreting design documents, specifications, and Unified Facilities Guide Specifications (UFGS). - Skilled in project scheduling tools and coordination (Microsoft Project, Primavera P6) - Strong knowledge of federal contracting standards (FAR/DFARS) and Federal government design & construction processes across different divisions. **EEO Statement:** We attract the best people in the industry, supporting their efforts to learn and grow. We strive to create a challenging and progressive work environment. We provide career opportunities that span a variety of disciplines and geographic locations, with projects that our employees plan, design, build and operate as diverse as the needs of our clients. CDM Smith is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, pregnancy related conditions, childbirth and related medical conditions, sexual orientation, gender identity or gender expression), national origin, age, marital status, disability, veteran status, citizenship status, genetic information or any other characteristic protected by applicable law. **Why CDM Smith?:** Check out this video and find out why our team loves to work here! (************************************************* **Join Us! CDM Smith - where amazing career journeys unfold.** Imagine a place committed to offering an unmatched employee experience. Where you work on projects that are meaningful to you. Where you play an active part in shaping your career journey. Where your co-workers are invested in you and your success. Where you are encouraged and supported to do your very best and given the tools and resources to do so. Where it's a priority that the company takes good care of you and your family. Our employees are the heart of our company. As an employer of choice, our goal is to provide a challenging, progressive and inclusive work environment which fosters personal leadership, career growth and development for every employee. We value passionate individuals who challenge the norm, deliver world-class solutions and bring diverse perspectives. Join our team, and together we will make a difference and change the world. **Job Site Location:** United States - Nationwide **Agency Disclaimer:** All vendors must have a signed CDM Smith Placement Agreement from the CDM Smith Recruitment Center Manager to receive payment for your placement. Verbal or written commitments from any other member of the CDM Smith staff will not be considered binding terms. All unsolicited resumes sent to CDM Smith and any resume submitted to any employee outside of CDM Smith Recruiting Center Team (RCT) will be considered property of CDM Smith. CDM Smith will not be held liable to pay a placement fee. **Amount of Travel Required:** 100% **Assignment Category:** Fulltime-Temporary **Visa Sponsorship Available:** No - We will not support sponsorship, i.e. H-1B or TN Visas for this position **Skills and Abilities:** - Must be a U.S. citizen. - Able to pass a federal background check. - Knowledge of design review, construction administration, cost estimating, scheduling, and contract management. - Demonstrates technical proficiency and design application knowledge. - Strong organizational skills to balance and prioritize work. - Excellent attention to detail and commitment to quality assurance. - Familiar and comfortable working on computers/tablets/phones and digital platofrms, mobile technology, and inspection/reporting software. - Strong writing and oral communication skills to work with military clients, contractors, and government teams. - Ability to work with multiple stakeholders and problem-solving skills for handling design discrepancies or construction conflicts in the field.. - Good interpersonal skills to cultivate relationships with colleagues, customers, and partners. - Ability to work independently in field settings under limited supervision. **Background Check and Drug Testing Information:** CDM Smith Inc. and its divisions and subsidiaries (hereafter collectively referred to as "CDM Smith") reserves the right to require background checks including criminal, employment, education, licensure, etc. as well as credit and motor vehicle when applicable for certain positions. In addition, CDM Smith may conduct drug testing for designated positions. Background checks are conducted after an offer of employment has been made in the United States. The timing of when background checks will be conducted on candidates for positions outside the United States will vary based on country statutory law but in no case, will the background check precede an interview. CDM Smith will conduct interviews of qualified individuals prior to requesting a criminal background check, and no job application submitted prior to such interview shall inquire into an applicant's criminal history. If this position is subject to a background check for any convictions related to its responsibilities and requirements, employment will be contingent upon successful completion of a background investigation including criminal history. Criminal history will not automatically disqualify a candidate. In addition, during employment individuals may be required by CDM Smith or a CDM Smith client to successfully complete additional background checks, including motor vehicle record as well as drug testing. **Pay Range Minimum:** $78,624.00 **Pay Range Maximum:** $157,248.00 **Additional Compensation:** All bonuses at CDM Smith are discretionary and may or may not apply to this position. **Work Location Options:** Successful candidate will be required to work 100% in the field locations. **Driver's License Requirements:** An appropriate and valid driver's license is required. **Seeking candidates for a potential future opportunity!:** We are looking for qualified candidates for this position in anticipation of future project opportunities. Please note this is an "Evergreen" position which will be used to build our candidate pool but is not a role that is open at this time. If you are interested in being considered for this position should this position become available, we encourage you to apply to be part of our talent community. By having your information on file, we can reach out to you when this or a similar role officially opens. **Massachusetts Applicants:** It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.
$78.6k-157.2k yearly 1d ago

Looking for a job?

Let Zippia find it for you.

Project Engineer
Insight Global
Engineering associate job in Norman, OK
Title: Project Engineer Pay: $55k-$85k depending on over time Day-to-Day: Insight Global is seeking a Project Engineer for an energy and automation digital solutions company. This entails traveling to data center sites, communicating with project managers, subcontractors, and construction workers. This person will be on Data Center construction sites and tasked with learning and becoming the go to engineer for questions on a given drawing package. Candidates must be open to travel, as they may need to be assigned to other site locations. Day-to-day will include the daily and weekly inspections, testing schedules for data center construction and skid installations, and document installations. They will provide engineering support to the Site Supervisor and Project Manager. Must Haves: Strong interpersonal skills Bachelor's of Engineering Degree- ABET accredited
$55k-85k yearly 3d ago
Project Engineer
Musselman & Hall Contractors 2.9
Engineering associate job in Overland Park, KS
The Project Engineer is responsible for assisting and supporting the Project Management team in the completion of jobs. Essential Functions Follow M&H project and account management, as well as estimating SOP's Provide necessary support of all business functions within the division, including Business Development, Account Management, Project Management, Estimating, and Field Operations Support the Estimating Team and Project Managers with the execution of change orders or estimates as needed Participate within the Project Management team to ensure all responsibilities are being fulfilled Manage cost reports, analyze budget variances, and implement strategies to reduce project costs Assist the Project Manager in the preparation of change orders and coordinate receivables and collections with office administrative management team to ensure timely and accurate monthly job billings Review AR, CIP, Billings, Project Cost, Change Orders, Schedule, etc. Work with Field Operations to ensure that the scope of work is executed on time and within budget Attend and actively participate in the weekly Operations Meeting Review schedules, critical project activities, job start-ups, Manpower, etc. Performs other duties as assigned Knowledge, Skills, and Abilities Ability to act with integrity, professionalism, confidentiality, and in accordance with Musselman and Hall policies and values Effective written and verbal communication skills Strong analytical and problem-solving skills Proficient and professional communication skills via email Demonstrated attention to detail, time management, ability to meet deadlines, and organizational skills Experience & Education 3 or more years of relevant experience, including estimating and managing industrial and/or commercial construction projects is required. 5 or more years of relevant experience managing industrial and/or commercial construction projects, and experience managing and/or training others is required (Sr. Role Only) Bachelor's Degree in Construction Management, Engineering, or Business strongly preferred Proficiency in construction and project management software, Microsoft Office and/or Google Suite Required Physical Demands The physical demands listed must be able to be met by the incumbent in this role in order to successfully perform the essential functions of the job, with or without reasonable accommodation Ability to regularly attend work in an office environment Ability to spend prolonged periods of time sitting at a desk and working on a computer Ability to safely navigate active job sites around heavy equipment and in varying weather conditions Other Requirements Full-time hours required; most work will be performed on weekdays during normal business hours. Hours may fluctuate based on project necessity Some travel to job sites when necessary Some travel to other M&H office locations may be required
$58k-82k yearly est. 21h ago
Project Engineer
Nabholz Corporation 4.7
Engineering associate job in Oklahoma City, OK
Originally founded as a small construction company in 1949, Nabholz is now a team of more than 1,800 industry leading professionals working together to serve our clients, communities, and each other. Over the last 75+ years, we've grown into a national multi-service contractor offering a full range of construction, industrial, civil, and environmental services. We are proud to offer you: Medical, Dental and Vision Care 401(k) Retirement Savings Plan with Company Matching Contributions Long-Term Disability Insurance Company-Paid Life Insurance Supplemental Voluntary Life and Accidental Death and Dismemberment Insurance Dependent Voluntary Life Insurance Accident Recovery Flexible Spending Accounts Paid Holidays and Vacation Direct Deposit Wellness Program with Incentives Summary: Assists in the coordination of assigned construction projects, from the planning and buyout phases to the construction phase, closeout, and warranty period. Works directly with the Project Management team and Project Superintendent and typically offices at the jobsite. Conforms to corporate policies and procedures, upholds ethical standards, and exemplifies corporate values, with an emphasis on integrity and service. Essential Duties and Responsibilities: Thoroughly understand project documents, including drawings, specifications, and addenda. Assist Project Manager with distribution of project documents. Manage shop drawings and submittals, reviewing for conformance to project requirements, transmitting to appropriate approver, and logging appropriately. Manage Request for Information (RFI) process, gathering pertinent information, coordinating with Project Manager and Superintendent, logging appropriately, and posting answers to As-Built drawings. Assist Superintendent with management of daily jobsite operation, preparing correspondence and meeting minutes, creating task lists, etc. Promote jobsite safety with an achievable goal of zero jobsite incidents. Actively participate in safety meetings, job walks, and other safety-specific tasks. Coordinate and direct the activities of professional service providers such as material testing and surveying firms. Assist Project Team in implementation of Quality Management System and compliance with QMS protocols. Ensure accurate daily update of As-Built drawings. Lead assigned elements of project closeout, including Punch List, Owner turnover manuals, required Owner training. This job is safety sensitive for medical marijuana purposes. All other tasks as assigned. Education/Skill Requirements: A 4-year college degree in Construction Management, Construction Science, or similar program is preferred. Some career experience in commercial construction preferred. Excellent written and oral communication. Must be willing and able to speak before groups of people in project interviews and meetings. OSHA 10-hour training. Microsoft Office suite. Sage Estimating. Sage 300 Construction and Real Estate (accounting application). Scheduling software(s). Prolog Manager. Maintain positive relationship with clients, designers, and vendors. Actively promote safe execution of projects, with an achievable goal of zero jobsite incidents. Read and interpret drawings and specifications. Read and interpret building codes, zoning ordinances, OSHA requirements, and other legal restrictions. Understand construction schedule and anticipate project flow. Prepare minor and miscellaneous pricing. Acute attention to detail to assist in research, investigation, or financial review. Manage multiple scopes of work, both subcontracted and self-performed. Plan, prepare and run jobsite meetings as needed. Work in a collaborative team environment. Physical Demands: Travel overnight as projects or corporate responsibilities require. Continuously sit, stand, or walk. Bend, squat, climb stairs, ladders, and occasionally work off elevated surfaces. Lift frequently, occasionally up to 50 pounds. Work environment: Office, cubicle, or workstation. Job trailer or jobsite office. Active project sites for job walks. AA/EOE. Women, Minorities, Veterans, and Disabled People Encouraged to Apply Nabholz is an Equal Opportunity Employer and does not discriminate on the basis of sex, race, color, religion, sexual orientation, national origin, cultural heritage, ancestry, political belief, age, marital status, pregnancy, physical or mental disability, protected veteran status or any other characteristic protected by federal, state, or local laws. Employment at Nabholz is subject to post offer, pre-employment drug testing. Nabholz is a drug-free workplace and an E-Verify employer. The above description covers the principal duties and responsibilities of the job. The description shall not, however, be construed as a complete listing of all miscellaneous, incidental, or similar duties which may be required from day-to-day.
$71k-89k yearly est. 3d ago
Project Engineer
Acme Constructors, Inc. 3.9
Engineering associate job in Saint Louis, MO
ACME Constructors Inc. | St. Louis, MO Employment Type: Full-time, In-Office Why Join Our Team? We are a 100% employee-owned (ESOP) company, which means you can build wealth and benefit directly from our shared success. Our culture is built on a foundation of collaboration, accountability, and excellence. We also offer a comprehensive benefits package, including: Competitive Compensation: Starting at $70,000 annually, based on experience Annual performance-based bonus Weekly pay Comprehensive Benefits: 401K with a 4% employer match Medical, Dental, and Vision insurance Employer-paid Life, AD&D, Short-Term, and Long-Term Disability Voluntary Accident Insurance Employee Assistance Program Generous Paid Vacation & Holidays About ACME Constructors Since 1947, we have been a leader in industrial construction, serving Fortune 500 and privately held companies across diverse industries. Our success is built on a commitment to safety and superior project management. With over 700 projects annually and three Missouri locations, we are a team of customer-driven, positive, and hardworking individuals with an entrepreneurial spirit. Our employee-owned structure fosters a deep sense of community and collaboration. About the Role We are looking for a proactive Project Engineer to assist with the planning, coordination, and execution of construction projects. This is a vital, full-time, in-office role that requires working closely with Project Managers and field teams to ensure projects are completed on time, within budget, and to the highest standards of safety and quality. Responsibilities Assist with project planning and scheduling. Review project plans and specifications. Manage technical documentation (submittals, RFIs, change orders). Perform quality control inspections. Support the procurement of materials and equipment. Provide technical support to construction teams. Assist in managing project costs and budgets. Qualifications Experience: Minimum of 2 years of experience in construction engineering or project management is preferred. Knowledge of construction processes and project management practices. Skills: Excellent communication, organizational, and problem-solving skills. Ability to work effectively in a team environment. Detail-oriented and able to manage multiple tasks simultaneously. Technical: Proficiency with Procore, CMIC, Microsoft Project, Bluebeam and the Microsoft Office Suite (Excel, Word, PowerPoint). Education: Bachelor's degree in Civil Engineering, Construction Management, or a related field. Professional Engineering (PE) license or working toward certification is a plus. READY TO APPLY? To apply, take the next step and share your resume with us. All inquiries, resumes and referrals shared are held in strict confidence. For questions and more information, contact ****************************. ACME is an Equal Opportunity Employer. We welcome differences in form of gender, race, ethnicity, disability, geography, socioeconomic status, age, politics, religion, philosophy, sexual orientation, gender identity or expression and veteran status. All applicants who share this goal are encouraged to apply-we look forward to hearing from you!
$70k yearly 1d ago
Mechanical Engineer (Accident Reconstruction)
Corps Team 4.0
Engineering associate job in Fayetteville, AR
Our client is one of the largest engineering consulting firms in the United States solely focused on vehicle accident reconstruction looking to identify a Mechanical Project Manager (P.E.) in Fayetteville, AR and Nashville, TN. Their teams are made up of mechanical and biomechanical licensed engineers that reconstruct complex motor vehicle collisions. The Project Manager's play a critical role serving as project leads in conducting fieldwork and performing analysis using the latest technologies in 3D scanning and computer simulations supported by our internal digital media team. The PM's will also present accurate and compelling results to our clients and, at times, are asked to testify in trials. Ideal candidates will have their P.E. license, hold a master's degree in mechanical engineering and have a have had direct client-facing roles. The candidate must enjoy working in a high-energy environment and being outdoors-this opportunity involves some regional travel. Skills and Qualifications B.S. or M.S. in Mechanical Engineering and has obtained his/her P.E. license Must have prior or current Accident Reconstruction Experience 4+ years of Engineering experience, with strong client interaction accountabilities. Excellent Interpersonal skills (oral and written), and ability to foster strong relationships with teammates and clients Available to travel regionally Comfortable working on a team and in a collaborative space Positive attitude full of commitment and a desire to contribute Passion for teaching/mentoring clients and colleagues Preferred: An interest in motor vehicles and automotive engineering. Has utilized 3D Scanners, drones, and photography. Base Salary: $150,000 to $170,000-negoitable. Final determination of salary will be based on an evaluation of experience, education, budget, etc.
$52k-69k yearly est. 21h ago
Project Engineer
Clayco 4.4
Engineering associate job in Saint Louis, MO
About Us Clayco is a full-service, turnkey real estate development, master planning, architecture, engineering, and construction firm that safely delivers clients across North America the highest quality solutions on time, on budget, and above and beyond expectations. With $7.6 billion in revenue for 2024, Clayco specializes in the "art and science of building," providing fast-track, efficient solutions for industrial, commercial, institutional, and residential-related building projects. The Role We Want You For The Construction Project Engineer will be based in the Midwest and will service our clients in a multi-state region. You may also travel across the country. You will have the opportunity to build large, complex, iconic design-build projects valued at $30 million and above. In this role, you will be part of a team responsible for taking projects from conceptual stages through to closeout. The Specifics of the Role Build client and subcontractor relationships. Team with architects, engineers, and planners to create and manage a design schedule. Assist in the establishment of project forecasts and budgets. Manage costs and ensure adherence to budget. Accept responsibility for project execution. Mentor and develop interns and new incoming project management staff. Requirements Bachelor's degree in Construction Management, Engineering, Architecture, or a related field. 0 to 5 years of experience managing construction projects, ideally design-build. Demonstrated knowledge of construction principles, practices, and technology. Previous experience as part of a successful project management team. Ability to walk a job site, climb ladders, and scale multi-floor scaffolding. Ability to lift objects weighing at least 50 lbs. Some Things You Should Know This position will service our clients in St. Louis, MO. Our clients and projects are nationwide-travel will be required. No other builder can offer the collaborative design-build approach that Clayco does. We work on creative, complex, award-winning, high-profile jobs. The pace is fast! This position is classified as a safety-sensitive role in accordance with applicable state and federal laws. Candidates selected for this position will be subject to a comprehensive background check, including mandatory drug testing. Why Clayco? 2025 Best Places to Work - St. Louis Business Journal, Los Angeles Business Journal, and Phoenix Business Journal. 2025 ENR Midwest - Midwest Contractor (#1). 2025 ENR Top 100 Design-Build Firms - Design-Build Contractor (Top 5). 2025 ENR Top 100 Green Contractors - Green Contractor (Top 3). 2025 ENR Top 25 Data Center Builders - Data Center Contractor (Top 3). Benefits Discretionary Annual Bonus: Subject to company and individual performance. Comprehensive Benefits Package Including: Medical, dental, and vision plans; 401(k); generous PTO and paid company holidays; employee assistance program; flexible spending accounts; life insurance; disability coverage; learning & development programs; and more! Compensation The salary range for this position considers a wide range of factors in making compensation decisions, including but not limited to: education, qualifications, skills, training, experience, certifications, internal equity, and location. Compensation decisions are dependent on the facts and circumstances of each individual.
$60k-79k yearly est. 4d ago
Project Engineer
Emery Sapp & Sons, Inc. 3.9
Engineering associate job in Columbia, MO
We are seeking an experienced and motivated Project Engineer to join our team. The successful candidate will be responsible for providing technical support and project coordination for construction projects. As a key member of our project management team, the Project Engineer will be responsible for ensuring that projects are completed on time, within budget, and to the highest level of quality. Responsibilities Provide technical support for construction projects, including reviewing plans and specifications, preparing construction schedules, and coordinating with subcontractors Assist with project management activities, including developing project budgets, managing project resources, and monitoring project progress Ensure that all projects comply with relevant laws, regulations, and safety standards Manage project change requests, ensuring that changes are properly evaluated and approved Communicate with clients, stakeholders, and project team members to ensure that all parties are informed of project progress and any issues that arise Participate in project meetings and coordinate with project team members to ensure that all work is completed on schedule Assist in the development and implementation of project plans and schedules, ensuring that all work is completed on schedule and within budget Identify and manage project risks, ensuring that risks are mitigated and/or avoided Other duties as assigned Qualifications Bachelor's degree in civil engineering, construction management, or a related field 1+ years of experience in construction project engineering or related field Strong analytical skills, with the ability to analyze project data and identify trends and opportunities for improvement Excellent communication skills, with the ability to communicate effectively with a variety of audiences Experience with government contracts and compliance is a plus
$59k-75k yearly est. 3d ago
Project Engineer - Industrial Thermal Systems
Nesco Resource 4.1
Engineering associate job in Tulsa, OK
📍 Tulsa, OK | Full-Time | Monday-Friday, 7:00 a.m.-4:00 p.m. | On-Site Eligible candidates must be legally authorized to work in the U.S. and not require current or future sponsorship. 💲 Pay & Benefits 💵 Compensation: $95,000-$150,000 (based on experience) 🩺 Health & Wellness: Medical, dental, and vision insurance 🏦 Retirement Planning: 401(k) with company match 🏖️ Time Away: Generous paid time off, personal days, and holidays 💡 Additional Support: Employee Assistance Program (EAP) 🛡️ Coverage: Life and disability insurance 🚀 Career Growth: Professional development in a stable, growth-focused organization About The Role We're seeking a technically strong Project Engineer to support the execution of engineered-to-order industrial cooling equipment. This role is ideal for an engineer who enjoys owning projects end-to-end, working directly with customers, and serving as the technical bridge between engineering, manufacturing, and operations. You'll take responsibility for projects once they transition from the sales/application phase and remain accountable through design validation, fabrication support, and shipment. Key Responsibilities Project Ownership Assume responsibility for projects at internal handoff and manage them through completion and delivery Serve as the primary technical point of contact for customers throughout the project lifecycle Lead project kickoff meetings and align internal teams on scope, schedule, and requirements Engineering Coordination Translate customer requirements into complete engineering packages for design and manufacturing Review thermal, mechanical, and code-related calculations using internal and third-party tools Ensure engineering designs meet applicable specifications, quality standards, and regulatory requirements Design & Documentation Review and submit approval drawings to customers, incorporating feedback as needed Review manufacturing drawings prior to procurement and fabrication to ensure accuracy and build readiness Maintain clear, accurate project documentation across departments Execution & Communication Coordinate schedules with Planning, Purchasing, and Production to support on-time delivery Monitor project progress and proactively resolve technical or scheduling challenges Support final shipping coordination and documentation as required Project Leadership Provide technical guidance and oversight to project-related engineering resources Support workload coordination and execution quality within assigned projects Qualifications Bachelor's degree in Mechanical Engineering, Chemical Engineering, or a related discipline 5+ years of engineering experience in a manufacturing or industrial equipment environment Strong understanding of mechanical and thermal design principles Experience supporting engineered or custom-built industrial systems (heat transfer experience preferred) Proficiency interpreting technical drawings, specifications, and engineering calculations Comfortable working cross-functionally and communicating directly with customers Strong organizational skills with the ability to manage multiple active projects Work Environment This position is primarily office-based with regular interaction in a manufacturing facility. PPE is required when on the shop floor, including safety glasses, hearing protection, and safety footwear. The manufacturing environment includes typical fabrication conditions such as noise, dust, and temperature variation. Occasional lifting up to 25 lbs. may be required. Nesco Resource offers a comprehensive benefits package for our associates, which includes a MEC (Minimum Essential Coverage) plan that encompasses Medical, Vision, Dental, 401K, and EAP (Employee Assistance Program) services. Nesco Resource provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.
$95k-150k yearly 2d ago
Engineering Intern - Summer 2026
Grimco, Inc. 4.1
Engineering associate job in Owensville, MO
Do you want to work for a company where the people are the purpose? Grimco is a leading $1.5 billion sign supply distribution company serving the graphics and signage industry. As a family-owned business, we combine the stability and resources of an industry leader with the agility and innovation of an entrepreneurial environment. Job Description We're seeking a Mechanical/Industrial Engineering Intern who wants real-world experience applying Six Sigma methodologies in a manufacturing environment. You'll own process improvement projects from concept to completion, working hands-on in our production facility to drive measurable operational enhancements. What You'll Do Design and execute Design of Experiments (DOE) in manufacturing environments to optimize process parameters and product quality Conduct Big Data Analysis to uncover patterns and insights from production data streams Combine AI with Mechanical and Industrial Engineering tools to develop intelligent automation solutions Execute DMAIC projects to reduce process variation and eliminate manufacturing waste Conduct time studies, process mapping, and statistical analysis to identify improvement opportunities Design and prototype automation solutions for production line efficiency Apply statistical process control techniques to monitor and optimize manufacturing operations Collaborate with production teams to implement Lean manufacturing principles Present data-driven findings and recommendations to facility leadership Qualifications Currently pursuing a degree in Industrial, Mechanical, Manufacturing, or related Engineering field Expected graduation date: 2027 or 2028 Coursework or project experience in Six Sigma, statistical analysis, or process improvement Self-starter who thrives with autonomy and data-driven problem solving Comfortable working in a manufacturing environment with production equipment Familiarity with statistical software, process mapping tools, or quality control methodologies Ready to make your mark? Apply today and join us in driving operational excellence in sign manufacturing! What We Offer Hands-on experience applying Six Sigma tools with immediate impact Mentorship from experienced engineering professionals and certified Black Belts Exposure to diverse manufacturing processes in the sign and graphics industry Competitive internship compensation Potential for full-time opportunities upon graduation Additional Information Grimco is a national wholesale sign supply manufacturer and distributor with over 50 locations across North America. We focus on distributing quality products and providing excellent service to the sign industry. Our offering of sign supplies includes traffic signs, blanks, substrates, boards, digital print media, wrap films, sign vinyl, application tape, banner material and supplies, sign frames, banner stands, LEDs and electrical accessories, grand format solvent/UV/latex printers, inks, software and more. By completing this online application for employment, you certify that the information on this application is true and complete to the best of your knowledge. You understand that any misrepresentation or omission of fact in response to any inquiry made in this application may result in rejection of application or, if hired, dismissal whenever it is discovered. You authorize and release all parties from any liability or damage that may result from seeking, furnishing, or using such information. You understand and agree that, if hired, your employment is for no deﬁnite period and may, regardless of the date of payment of compensation, be terminated by Grimco, Inc. at any time, for any or no reason, with or without notice. You understand that no representation to the contrary is valid unless in writing, set a deﬁnite term of employment, and signed by the company's CEO. You further understand and agree that any job offer is contingent upon your passing, to the company's satisfaction, a drug and/or alcohol test, criminal background check and other possible screenings. You understand that this application is active for 90 days only, and if you do not hear from the company but still wish to be considered for employment after 90 days, you will need to ﬁll out a new application.
$28k-40k yearly est. 21h ago
Engineering Technician - Manufacturing
Air Products and Chemicals 4.2
Engineering associate job in Saint Louis, MO
At Air Products, our purpose is to bring people together to reimagine what's possible, collaborate and innovate solutions to the world's most significant energy and environmental sustainability challenges. Grow with us as we embark on building tomorrow together by being the safest, most diverse and most profitable industrial gas company in the world. Reimagine What's Possible We are seeking Manufacturing Technicians for Assembly and Spinning at our St. Louis, MO location. In this role, the Manufacturing Technician will have the following responsibilities: Follow all safety policy and PPE requirements Operate continuous process equipment for manufacturing hollow fiber membranes Raw material handling and preparation of batch mixtures Measure and monitor all process conditions to ensure product quality Operate and maintain equipment to ensure safety, quality, and productivity requirements Maintain records such as product inspection & process monitoring logs Requirements: High school diploma or equivalent General knowledge of Windows PC environment Basic mechanical skills Demonstrated initiative to complete job assignments Demonstrated commitment to quality - detailed inspections Ability to follow operating instructions and safety procedures Able to work an evening shift Work Hours and Pay: Starting Pay: $25.78 per hour 12-hour rotating shift (36 / 48 hour work weeks) What's In It for You: At Air Products we foster a culture of inclusion where every voice is heard, and everyone feels they belong and matter. Additionally, we offer competitive pay and great benefits to our employees. Check out some of our benefits below! Affordable Medical, Dental and Vision Insurance (day 1 of employment) 401k with 100% vested company core and match Paid Vacation, holidays + sick time Paid Parental leave (Up to 4 weeks for both parents) Backup Child and Adult Care benefit Adoption assistance Flexible spending accounts (medical, dependent daycare) Life Insurance (AD&D- Paid for by Air Products), Supplemental AD&D Legal Plan & Identity theft coverage EAP (Employee Assistance Program) Many more supplemental benefits available #INDGEM #LI-JM2 Air Products proudly values the skills, dedication, and leadership that Veterans bring to the table. As a Veteran-friendly organization, we actively encourage and welcome Veterans to apply for various roles within our company. We recognize the unique strengths and experiences that Veterans contribute, and we foster a workplace that honors your service while providing a platform for professional growth. We are the world's largest hydrogen producer with over 80 years of industrial gas experience. We are hydrogen and industrial gas experts delivering safe, end-to-end solutions, investing in real, clean energy projects at scale, and driving the industry forward to generate a cleaner future. At Air Products, we work in an environment where we put safety first, diversity is essential, inclusion is our culture, and each person knows they belong and matter. To learn more, visit About Air Products. We offer a comprehensive benefits package including paid holidays and vacation, affordable medical, dental, life insurance and retirement plans. You will be eligible for benefits and also be 100% vested in your retirement benefits on your first day of employment. We are an Equal Opportunity Employer (U.S.). You will receive consideration for employment without regard to race, color, religion, national origin, age, citizenship, gender, marital status, pregnancy, sexual orientation, gender identity and expression, disability, or veteran status. Air Products is committed to working with and providing a reasonable accommodation to individuals with disabilities. If you have a disability and you believe you need a reasonable accommodation to search for a job opening or to submit an online application, please e-mail us at [email protected]. General application status inquiries are not answered by this mailbox rather you'll receive an e-mail directly from our Career Center and/or the Talent Acquisition Specialist.
$25.8 hourly 7d ago
Specialist, Manufacturing Engineer
L3 Harris 4.4
Engineering associate job in Camden, AR
L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris Technologies is the Trusted Disruptor in the defense industry. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Specialist, Manufacturing Engineer Job Code: 32239 Job Location: Camden, AR Job Schedule: 4/10: Employees work 10 hours per day, 4 days a week Job Description: We are looking for a Specialist, Manufacturing Engineer to join our expanding team in Camden, AR. The Specialist, Manufacturing Engineer is responsible for developing, implementing, and analyzing manufacturing engineering plans and projects, and communicating these plans to internal and external customers. This role involves defining, developing, and transferring manufacturing and engineering tools, strategies, and systems. The Specialist will also develop manufacturing strategies for specific products and processes, actively participate with engineering project teams to coordinate the release of new products, estimate and track manufacturing costs, determine time standards, and make recommendations for tooling and process requirements for new or existing product lines. Additionally, the Specialist will maintain records and reporting systems to coordinate manufacturing operations. Essential Functions: Makes moderate enhancements or improvements to systems and processes to solve problems or improve effectiveness of job area. Communicates with contacts inside and outside of own department to explain and interpret operational processes, practices, and procedures. Recommends enhancements to systems and processes. Works to achieve operational targets for specific programs and projects with moderate impact on departmental results. May be responsible for entire projects or processes within job area. May be responsible for providing guidance, coaching and training to other employees within job area. May manage projects at this level with responsibility for the delegation of work and the review of others' work product. Qualifications: Bachelor's Degree and minimum 4 years of prior relevant engineering experience. Graduate Degree and a minimum of 2 years of prior related engineering experience. In lieu of a degree, minimum of 8 years of prior related engineering experience. 2 years of experience utilizing statistical process control. 1 year of continuous improvement experience in a manufacturing environment. L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish . For information regarding your Right To Work, please click here for English or Spanish .
$50k-66k yearly est. 7d ago
Manufacturing Engineer
Potter Electric Signal 4.1
Engineering associate job in Hazelwood, MO
Join the 125-year legacy of Potter Electric Signal Company! Potter has been a part of the St. Louis community since 1898 and we are very proud of our rich history in the fire and life safety industry. Potter's mission is to be the "Symbol of Protection" for fire and life safety solutions worldwide by combining the latest technology in fire protection with the dedicated manpower for which we have been known for over one hundred years. Our vision is to provide industry leading quality solutions, products and services for the protection of life, property and the environment. With unwavering dedication to our customers, Potter looks to continue as the industry standard in both product and service with increased focus on international expansion. Each employee at Potter takes great pride in knowing that every product we assemble, service, and sell is for the purpose of saving lives around the world. We strive to provide employment opportunities to those individuals who are performance driven, team players, take pride in their work, and are enthusiastic and passionate about their job. Potter Global Technologies and our private equity firm, KKR, value our employees and all that they do. KKR offers a unique benefit and opportunity for all employees to participate in an ownership program of Potter Global Technologies. Being a co-owner allows each employee to play a more direct role in the business itself and reap the financial benefits of the Company's success. The Manufacturing Engineer is responsible for designing, implementing, and improving manufacturing processes and systems to enhance efficiency, quality, and productivity. This position will play a crucial role in streamlining operations, reducing costs, and maintaining high product quality throughout the manufacturing process. Essential Functions Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Provide technical support and problem-solving skills for the Manufacturing department to meet quality and quantity objectives. Review ECO's and implement new work instructions, tooling, and any training that might be needed for plant assembly. Investigate production problems to determine causes and to recommend corrective actions. Write work instructions for new manufacturing processes. Train supervisors and operators in accordance with work instructions. Initiate continuous improvement activities. Provide technical support for Maintenance personnel. Acting liaison between Manufacturing, Maintenance, QC, R&D, and Purchasing departments. Design Jigs and fixtures to aid in assembly processes. Perform other duties as assigned. Required Skills/Abilities Ability to act with integrity, professionalism, and confidentiality. Excellent verbal and written communication skills. Excellent time management skills with a proven ability to meet deadlines. Strong analytical and problem-solving skills. Ability to prioritize tasks and to delegate them when appropriate. Proficient with Microsoft Office products and Solid Works Required Qualifications Bachelor's Degree in Mechanical Engineering or similar. Minimum of 2 years of applicable experience. Willingness to be hands-on within the manufacturing floor. Preferred Qualifications Experience in a medium volume manufacturing environment. Machine and fixture design experience. PLC Software (GE Proficiency Machine Edition) experience. This is a full-time position, on-site at the manufacturing facility. The hours of work are Monday through Friday, 40 hours per week. An occasional shift in hours may be necessary to accommodate business needs. Work Environment/Physical Demands/Travel This job operates in a professional business office or home office where standard office equipment is routinely used, such as computers, photocopy machines, fax machines, telephones and filing cabinets. In addition, this job also operates in a warehouse/manufacturing setting where various tools and equipment are used. This role must be able to stand, bend, stoop, kneel and exhibit good visual acuity to perform daily tasks. This position must be able to lift 50 pounds at times. Must be able to access and navigate each department at the organization's facilities. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of an employee for this job. Activities, duties and responsibilities may change at any time with or without notice.
$58k-73k yearly est. 7d ago
Manufacturing Engineer
Essex Industries 3.8
Engineering associate job in Saint Louis, MO
Essex Industries is a multi-site aerospace and defense manufacturer serving military and commercial customers worldwide. The Manufacturing Engineer designs and improves manufacturing processes, tooling, and test equipment to support efficient production. This role optimizes layouts, workflows, and assembly methods while ensuring parts, tools, and processes meet product specifications and manufacturing goals. Essential Duties and Responsibilities: Using Solidworks, Designs and qualifies fixtures and tooling for assembly and manufacturing. Designs, specifies and qualifies test equipment. Analyzes and plans work force utilization, space requirements, and workflow, and designs layout of equipment and workspace for maximum efficiency. Confers with planning and design staff concerning product design to ensure efficient production methods. Project leader on NPD product integration in to the manufacturing facility, and represents operations at stage gate meetings on small to medium sized projects. Confers with vendors to determine product specifications and arrange for purchase of equipment, materials, or parts, and evaluates products according to specifications and quality standards. Estimates production times, staffing requirements, and related costs to provide information for management decisions. Applies statistical methods to estimate future manufacturing requirements and potential. Identifies, recommends and initiates continuous improvement projects in regards to processing, tooling and product flow. Prepare, review, and approve technical drawings and documents within a PDM environment. Required Education/Experience/Certifications: Knowledge equal to a Bachelor's degree in Mechanical, Manufacturing, or Industrial Engineering or related field and up to three years of experience; or equivalent combination of education and experience. Has knowledge of commonly-used concepts, practices, and procedures within manufacturing. Benefits Base Pay and Overtime Pay Eligible Bonus Opportunity Paid time off 10 company holidays Training & Development Retirement Benefits - 401k matching Tax-Advantaged Accounts Medical, dental, vision coverage Flexible Spending Account Life Insurance Parental Leave Pet Insurance Employee Assistance Program Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.
$57k-72k yearly est. 3d ago
Manufacturing Engineer
Addman Engineering, LLC
Engineering associate job in Wright City, MO
As a Manufacturing Engineer you'll be at the forefront of aerospace and additive manufacturing technologies. In this role you will be tasked with owning and improving the manufacturing processes and reporting for a growing advanced manufacturing site. As part of our ongoing commitment to excellence, you will be challenged to ensure our processes meet our AS9100 certification. This role will also be responsible for daily production scheduling assistance to meet our monthly goals. It's expected that you'll work with the engineering and sales teams to assess manufacturing requirements of incoming opportunities and provide timely feedback on cost and feasibility of inspection/inspection limits. At ADDMAN Engineering you'll be part of a rapidly growing world class engineering team, commonly interfacing internally with program managers, materials and process engineers, technicians, machinists, and company leadership. This role reports to the Engineering Manager. This position is subject to the International Traffic in Arms Regulations (ITAR) which requires U.S. person status. ITAR defines U.S. person as an U.S. Citizen or U.S. Permanent Resident. ESSENTIAL JOB FUNCTIONS: Maintain and improve the safe working environment on the shop floor and its surrounding areas. Assure the safe execution of all manufacturing and utility activities, demands that all Plant activities are conducted following all safety procedures, champions safety is the first consideration of all employees/contractors and promotes a safe work environment through own behaviors. Develop manufacturing reporting processes, lead integration of manufacturing processes into ERP and or MES systems Works with sales and engineer to assess incoming opportunities manufacturing requirements, support quoting of internal and external manufacturing costs while meeting qualification requirements Assess and audit existing or potential operator's abilities All quality requirements must be met daily by the manufacturing team. Review printed hardware for conformance to supplier or internal requirements at multiple stages in the manufacturing process i.e. post-print, post heat treat, and final inspection Actively participates in team problem solving, process improvement, and decisions Lead internal efforts to enhance our quoting, design, or manufacturing workflows Over time you may be expected to mentor, teach, and be an engineering technical resource for the organization Perform other duties as assigned Regular and punctual attendance Follow all Company policies and procedures ITAR REQUIREMENTS: To conform to U.S. export control regulations, applicant should be eligible for any required authorizations from the U.S. Government. Requirements SKILL REQUIREMENTS: Commitment to a safety culture where safety is the first consideration before starting any task Previous aerospace quality experience Mastercam experience up to and including 5-axis programming Experience with manufacturing /CNC machining processes QUALIFICATIONS: +10 years of working in a manufacturing environment in quality / technical role Able to work in a dynamic environment with changing priorities to exceed customer expectations Works independently, strong work ethic, is self-motivated and able to complete tasks with minimal supervision Ability to work on cross-functional teams to support the core business, ensuring quality products are delivered on time Computer aptitude (Outlook, PowerPoint, Word and Excel) Eligible to work in the United States without company sponsorship WORK ENVIRONMENT: This job operates in a professional additive manufacturing, traditional manufacturing and office environment. This role routinely uses standard office equipment such as printing equipment, computers, phones, photocopiers, filing cabinets, etc. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk and listen. The employee frequently is required to stand; walk; use hands to handle or feel; and reach with hands and arms Ability to accomplish the physical requirements of the position with or without reasonable accommodation SAFETY AND POLICY PRACTICES: Each employee must be knowledgeable of standard safety policies and procedures and adhere to the same while supporting the goals and objectives of the organization and recognizing the Company's need to achieve its business objectives. Each employee is responsible for complying with company hazardous waste disposal procedures. ADDMAN Engineering is proud to be an Equal Opportunity Employer of Minorities, Women, Protected Veterans, and Individuals with Disabilities. All terms and conditions of employment will be administered without regard to an individual's sex, gender identity, sexual orientation, race, color, religious creed, national origin, physical or mental disability, protected veteran status, or any other characteristic protected by applicable law. NOTE: This is intended to describe the general level of work being performed. This is not intended to be all-inclusive. The duties of this position may change from time to time, and the employee may perform other related duties to meet the ongoing needs of the organization. ADDMAN Engineering reserves the right to add, delete or modify these duties and responsibilities at its discretion. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions of this position. Employment is at-will, and nothing in this job description is intended to create or imply a contractual relationship or alter the at-will status of the employee.
$57k-74k yearly est. 7d ago
Manufacturing Engineer
Martin Sprocket & Gear 4.4
Engineering associate job in Paragould, AR
Are you ready to bring your Manufacturing Engineering skills to a team that values precision and innovation? At Martin Sprocket & Gear, we're dedicated to producing quality mechanical power transmission components, material handling systems, and custom forgings with excellence, and we're looking for skilled Manufacturing Engineers like you! What You'll Do: Complete hands-on training: Participate in an immersive training program to gain foundational knowledge and practical skills in design engineering processes. Develop standard drawings: Create and refine standard drawings within a regulated environment, ensuring compliance with industry standards. Project management: Oversee projects from start to finish, including the delivery of approval drawings, manufacturing prints, and bills of materials. 3D modeling and layout creation: Generate detailed 3D assemblies and layout drawings for conveying equipment, ensuring precision and functionality. Pricing model development and quoting: Design pricing models and prepare accurate quotes for custom, made-to-order components to meet client specifications. Collaboration with cross-functional teams: Work closely with manufacturing, sales, and quality teams to align design with production capabilities and customer expectations. Continuous improvement: Identify opportunities to streamline processes, improve design standards, and support cost-saving initiatives. What You'll Bring: Educational background: Bachelor's degree in Mechanical, Industrial, Manufacturing Engineering, or a related field is required. Manufacturing experience: Minimum of 2 years in a manufacturing environment. Mechanical aptitude: Strong technical skills and understanding of mechanical concepts. Drafting software skills: Familiarity with Inventor, AutoCAD, or SolidEdge is a plus. Attention to detail: Highly detail-oriented in all aspects of work. Customer service commitment: Dedicated to delivering excellent customer service and upholding Martin's standards. Communication skills: Exceptional interpersonal and communication abilities. Self-motivation and goal orientation: Proactive with a strong drive to achieve personal and team goals. Problem-solving and decision-making: Able to independently evaluate situations, solve problems, and make effective decisions. Change management: Recognizes opportunities for improvement and actively contributes to organizational goals. Positive attitude and growth mindset: Energetic, positive, and eager to expand skill set. Your Schedule: 1st Shift, Monday - Friday, 7:00 AM - 4:00 PM To perform this job successfully, you must be able to report daily to the branch to perform each essential duty satisfactorily. Reasonable accommodations may be made to enable qualified candidates with disabilities to perform the essential functions. Why Martin Sprocket & Gear, Inc.? Founded in 1951 by Joe Martin Sr., Martin Sprocket & Gear is a global leader in mechanical power transmission components, material handling systems, and custom forgings. We are proud to remain family-owned and operate on a simple philosophy: "Make a quality product, have plenty of it available, and be easy to do business with!" With dedicated employees, regional facilities, and strong distributor partnerships, Martin offers stability, growth potential, and a dynamic work environment for all team members. Why You Will Love Working Here: At Martin, our people are our greatest asset. We foster an inclusive, collaborative environment where innovation and growth thrive, and your contributions are valued as part of a team dedicated to excellence. Here is what you'll enjoy when you join our team: Comprehensive Health Benefits: Affordable Medical, Pharmacy, and Dental plans. Wellness Initiatives: Employee wellness programs for a healthy work-life balance. Financial Security: Life and Disability Insurance, plus a robust 401(k) Profit Trust Plan. Work-Life Balance: Paid Time Off (PTO) and company-paid holidays. Growth Opportunities: Career development and advancement within a thriving company. Competitive Pay & Perks Ready to Join Us? Apply today and become part of Martin Sprocket & Gear's legacy of quality and excellence! Disclaimers The above statements describe the general nature and level of work being performed by candidates applying for this specific role. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of candidates hired. Martin Sprocket & Gear is an EEO Employer and an E-Verify participating employer. We do not discriminate based on race, religion, national origin, sex, sexual orientation, gender identity, age, physical or mental disability, marital status, or veteran status. Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.
$51k-65k yearly est. 5d ago
Manufacturing Engineer II
Tt Electronics Plc
Engineering associate job in Olathe, KS
COME JOIN OUR JOURNEY! When you join TT, you join our global community of visionaries, creators, and achievers dedicated to engineering and manufacturing electronic solutions enabling a safer, healthier and more sustainable world. Simply put, we are a global manufacturer with a passion for engineering advanced electronics that benefit our planet and people for future generations. We are committed to having a positive impact on the world through a culture built around safety, transparency, collaboration, and positive relationships. Our teams are fueled by performance and expertise, leading the charge in innovation, efficiency and delivering world-class customer service. Be part of the journey. Role Overview and Responsibilities This position requires use of information which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e., "Green Card Holder"), Political Asylee, or Refugee. Introduction The Manufacturing Engineer II is responsible for independently developing and refining manufacturing processes, supporting production issues, improving efficiency, and implementing new programs. Serves as the primary owner for assigned value streams or product groups. Key Responsibilities Lead implementation of new products and processes into production. Resolve complex technical issues impacting quality, throughput, or cost. Design tooling/fixtures and define manufacturing requirements for programs. Conduct PFMEA/DFMEA for robust process development. Lead CI projects using Lean/Six Sigma methods. Develop and maintain work instructions, routings, and SOPs. Partner cross-functionally to drive manufacturability improvements. Perform other duties and responsibilities as assigned. Qualifications, Skills and Attributes Core Requirements Strong CAD And design-for-manufacturing skills. Deep understanding of manufacturing flow, lean tools, and RCCA. Ability to analyze data and recommend technical solutions. Effective communicator across functions. Ability to perform the essential functions of the position with or without reasonable accommodation (ADA). Desireable Skills and Experience Bachelors in Engineering (Manufacturing, Mechanical, Industrial or Electrical), plus 3-5 years of relevant experience. Aerospace/defense experience preferred; GD&T proficiency expected. This position requires use of information which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e., "Green Card Holder"), Political Asylee, or Refugee. TT Electronics does not accept any unsolicited resumes from third parties. Any resumes submitted by a third party for this or any other position will not be subject to any recruitment fees if hired. Solving Technology Challenges for a Sustainable World We want the very best people in our TT family across the globe - so we welcome applications from everyone, to celebrate a diverse mix of experiences, backgrounds and identities. We are committed to equality of opportunity for all and you can rest assured that TT Electronics takes positive steps to ensure we are an inclusive business, that will welcome and support you, from your initial application to wherever your career takes you! Please get in touch if you'd like to discuss any reasonable adjustments to your application, in order that we can accommodate and support you in the process. If you want to work for a company where who you are is valued and respected, we'd love to hear from you. #WeAreTT #BeMeAtTT
$47k-61k yearly est. 7d ago
Manufacturing Engineer
Kelvion Holding GmbH
Engineering associate job in Catoosa, OK
At Kelvion, our mission is to lead the industrial transformation by championing innovation and sustainability. From optimizing data centers and advancing hydrogen production to revolutionizing refrigeration and HVAC systems, our mission-critical thermal solutions empower industries around the globe. United as "One Kelvion," our global team delivers innovative solutions that drive customer success and support a sustainable future. Kelvion - Together, We Shape the Future The Role Focused on maintaining, developing, and operating manufacturing systems. Keeping production costs down, while maintaining the quality of the product while performing the following duties: What you will be responsible for: Oversees the technical aspects of developing, establishing, testing, and improving manufacturing systems and methods including, but not limited to automation and improvement of processing equipment, material handling equipment, tooling, fixtures, jigs, and testing equipment. Ensure that standard operating procedures are in place and remain relevant to drive safety, quality and efficiency. Confers with vendors to determine product specifications and arrange for purchase of equipment, materials, or parts, and evaluates products according to specifications and quality standards. Confers with management, engineering, and other staff regarding manufacturing capabilities, production schedules, and other considerations to facilitate production processes. Applies statistical methods to estimate future manufacturing requirements and potential. Ensure equipment maintenance tasks and schedules meet manufacturer's recommendations. Analyze labor cost and plan workflow, staffing, equipment placement and space requirements to improve manufacturing efficiency and identify and optimize bottlenecks. Ensure that metrics for efficiency and productivity are accurate and drive improvement. Assess capacity and required resources to meet customer demand. Identify and analyze process and design improvements to reduce cost and lead time. Ensures manufacturing processes are in compliance with all government laws and regulations. Recommends new policies or procedures as necessary to ensure improved products or services. Conducts training and assessments as directed. Document current and ideal practices and use post-completion audits to assure compliance of improvements. 3D CAD design through commissioning of tooling & fixtures Regular attendance, ability to arrive at work punctually, ability to work on-site. Ability to work cooperatively with others, ability to deal respectfully with the public, customers, vendors, other employees, managers, and executive management. Ability to perform multiple tasks concurrently, ability to work in a fast-paced environment, ability to interchange with others in the business. COMPETENCY OR POSITION REQUIREMENTS (knowledge, skills, and abilities) Personal computer skills including electronic mail, cloud data storage and sharing, record keeping, routine database activity, word processing, spreadsheets, charts, presentations, generate & interpret CAD drawings, layouts, graphics, etc. EDUCATION AND EXPERIENCE (required levels) Bachelor's degree in an Engineering field, with a minimum of 4-5 years' experience in a manufacturing environment. What we offer YOU: At Kelvion, we take your well-being seriously. Our comprehensive benefits package includes options for medical, dental, vision, life insurance, short-term and long-term disability insurance, Paid Time Off, and holidays. We also help you plan for retirement by offering a 401(k) Retirement Savings Plan with a company match. At Kelvion we thrive on collaboration, embracing diversity of thought, and valuing every voice. Within Kelvion creativity shines because people are listened too, their contributions recognized, and their ideas welcomed. Our flexible approach to the way we work, places people's health and satisfaction as a priority, enhancing engagement and fostering career opportunities. We empower engaged individuals to grow, progress and carve their own paths within the company. All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, or other legally protected status. If you need assistance with this application or a reasonable accommodation due to a disability, you may contact us at [email protected]. This email address is reserved for individuals with disabilities in need of assistance and is not a means of inquiry regarding positions or application status. We are unable to sponsor or take over sponsorship of an employment visa for this role at any time.
$53k-68k yearly est. 7d ago
Manufacturing Analytics Engineer
Us0767 Prysmian Cables and Systems Usa LLC
Engineering associate job in Independence, KS
Prysmian is the world leader in the energy and telecom cable systems industry. Each year Prysmian manufacturers thousands of miles of underground and submarine cables and systems for power transmission and distribution, as well as medium low voltage cables for the construction and infrastructure sectors. We also produce a comprehensive range of optical fibers, copper cables and connectivity for voice, video, and data transmission for the telecommunication sector. We are 30,000 employees, across 50+ countries. Everyone at Prysmian has the potential to make their mark; because whatever you do, wherever you are based, you will be part of a company that is helping transform the world around us. Make Your Mark at Prysmian! Role Purpose The Manufacturing Analytics Engineer will serve as the technical and analytical bridge between Operations Technology (OT) and enterprise analytics. This role owns the end-to-end flow of operational data-from historians and SCADA systems through to cloud storage and business intelligence-transforming raw plant data into trusted, actionable insights that power operational excellence and future AI initiatives across the organization. Qualifications 5+ years in a manufacturing analytics role. Bachelor's degree in computer science, data science, or engineering Experience with AVEVA, Ignition, PLC tags strongly preferred Scope & Ownership The Manufacturing Analytics Engineer will manage the entire analytics pipeline-from data collection at the historian layer to visualization and reporting-while plant engineering teams continue to own PLC-to-server connections. This role includes administrator-level control across data platforms, ensuring reliability, governance, and scalability. Own end-to-end data flow from OT historians (PI, Aveva, Ignition) to analytics and reporting environments. Design, script, and maintain ETL/ELT pipelines for historian-to-cloud data movement using Python, SQL, and AWS services. Develop reusable data models, APIs, and standardized data structures for use across plants and digital platforms. Troubleshoot and resolve data flow disruptions, historian tag failures, and dashboard refresh issues. Collaborate with plant engineers, OT, and IT teams to maintain secure, standardized, and reliable data pipelines. Tools, Tech Stack & Standards This role operates across a comprehensive industrial analytics ecosystem, connecting OT data systems with enterprise analytics and cloud platforms. The engineer will begin by stabilizing existing infrastructure and progress into modernizing and evaluating new tools and integrations. OT & Historian Layer: AVEVA PI System / AF, Aveva Insight, Ignition (Vision, Perspective, Tag Historian). Visualization & BI: QlikSense enterprise dashboards. Data Transformation: SQL and Python for modeling, scripting, and automation. Cloud Integration: AWS services (S3, Glue, Lambda, IoT Core) for data storage, transformation, and orchestration. Governance: Implement and enforce data naming conventions, lineage documentation, and retention policies. Automation: Develop and maintain automated ETL pipelines and data orchestration workflows. Expected Outcomes & Deliverables The Manufacturing Analytics Engineer delivers a unified, reliable, and scalable data ecosystem that connects OT systems to analytics, reporting, and AI readiness layers. The role transforms raw industrial data into structured insights, enables standardized reporting, and prepares the organization for advanced digital initiatives. Deliver automated, validated, and standardized dashboards and reports for OEE, downtime, scrap, and energy KPIs. Develop APIs and data connectors to share information across MES, CMMS, and other digital platforms. Ensure data models and structures are AI-ready for future machine-learning applications. Standardize KPI definitions and data models across plants, allowing variation only where process differences require. Integrate analytics and insights into operational processes and decision-making workflows. Mentor junior analysts and plant associates, building local data literacy and self-service analytics capabilities. Organizational Fit & Growth This role is positioned within the OT and Operations organization, acting as a bridge across Operations, IT, and Engineering. The Analytics Engineer will work horizontally across multiple functions to ensure data flows seamlessly and securely from the plant floor to enterprise analytics platforms. Reports to: OT and Operations organization. Collaborates with IT for ERP, AWS, and network integrations. Works with Engineering at the plant level for PLC-to-server and OT network data reliability. Initial focus: Stabilize and standardize data flows and dashboards across plants. Long-term evolution: Grow into Data Architecture and Systems Strategy leadership, defining enterprise standards for OT data. Future collaboration: Partner with external AI specialists when the organization moves into predictive and AI-driven initiatives. Why Join This position offers the opportunity to define the digital data backbone of the organization's manufacturing network. You will build systems that not only enable operational visibility today but also form the foundation for tomorrow's AI-driven manufacturing intelligence. The Manufacturing Analytics Engineer will play a pivotal role in connecting plants, data, and decisions. Prysmian, as an Equal Opportunity Employer, aims to attract and recruit individuals with diverse backgrounds, skills, and abilities. We strongly believe that diversity brings significant value at all levels of the organization, increasing the possibility of capturing market opportunities and maximizing value for our customers and stakeholders. With Diversity, Equity, and Inclusion (DE&I) as part of our Social Ambition 2030 and a strategic pillar of our Company culture, Prysmian is committed to the development of an organization that prioritizes talent, where people feel respected, included, and free to fully express their potential just as they are. All Managers and HRs in Prysmian are responsible for ensuring DE&I policies are respected during the recruiting process, as well as recognizing and mitigating unconscious biases that must not influence our selection processes. All persons will be considered for employment without regard to their race, ethnicity, religion, nationality, origin, citizenship status, socio-economic status, age, sex, gender identity or expression, sexual orientation, marital status, disability, military service or veteran status, pregnancy, parental leave, medical conditions, or any other characteristic protected by applicable federal, state or local laws. Prysmian will endeavor to make a reasonable accommodation for any disclosed physical or neurological condition or disability of a qualified applicant unless the accommodation would impose an undue hardship on the operation of our business. Visit our DE&I Page to learn more about Prysmian's commitments. Your application data will be treated according to our Data Protection Policy. If you believe you require assistance to complete this form or to participate in an interview, please contact us at [email protected]. English_formattedESQA508c.pdf
$47k-61k yearly est. 2d ago
Engineering Intern
Neighbors and Associates 3.3
Engineering associate job in Parsons, KS
Tank Connection is an international leader in the design, manufacturing and installation of liquid and dry bulk storage products and covers. Quality, experience, innovation, and customer service are hallmarks of our company. Tank Connection is an ISO9001 QMS Company that is also employee owned. You get the best of both worlds when an extensive ISO program is implemented by employee owners. As a result, Tank Connection has become the trusted name in storage around the world. Summer 2025 Engineering Internship Details: At Tank Connection, internships are designed to be a work-based experience that ensures mutual benefit for both the company and the intern. We aim to provide meaningful work, social and networking opportunities, exposure to company culture, comprehensive training, industry connections, and valuable feedback. This program embodies a shared purpose, fostering generational value. By recruiting top-notch talent, we are committed to shaping the future of Tank Connection, creating a lasting impact for both the organization and our interns. The Summer 2026 Internship Experience is a full time position June 1, 2026 to July 31, 2026 . All interns will be based out of our main location in Parsons, Kansas. Anticipate the possibility of employer paid travel to project sites, events, and trainings during the internship. On the application, please specify your engineering area of interest to be- Civil, Mechanical, or Design. Applicants should be prepared to attach a cover letter, resume, and two letters of recommendation to the online application. Position Summary: The Engineering Intern is an entry-level position. The intern will work with various team members and departments to allow the individual to gain experience in multiple engineering roles. Duties and Responsibilities Will vary by intern based on skills, company needs and intern interest emphasis (Civil, Design, and Computer Science Engineering) Conduct research using the internet and other sources of information. Perform analytical work for design and/or manufacturing-related objectives. Assist company personnel in research and development related projects. Create memos, correspondence, reports, and other documents as needed by engineering personnel. Create or update systems or designated databases for specific department needs. Develop drawings using engineering principles, established company standards, procedures, and instructions. Complete tasks that assist daily engineering and project management functions. Follow best practices, policies and procedures in the design, layout, and documentation of all company products. Specific tasks may include making models, drawings and assemblies using the CAD system and other computer tools. Provide regular feedback and updates to project team members and immediate supervisor about the status of assigned tasks. Present project results to management and/or department personnel. May perform other duties as assigned. Skills and Specifications: Strong verbal and written communication skills; with the ability to effectively communicate complex technical information. Demonstrated proficiency with MS Word, Excel, and G-Suite. Proficient in AutoCAD 2018 and/or Autodesk Inventor 2018 or later is preferred. Solid problem-solving skills. Able to manage multitask work in a fast-paced environment. Able to work proactively and independently on a broad variety of projects. Able to establish and maintain healthy working relationships with people in course of work. Education and Qualifications: College Level Junior or Senior Desired Major(s)- Computer Engineering, Computer Software Engineering, Mechanical Engineering, Civil Engineering, Industrial Engineering, Construction Engineering. Engineering Intern Physical Requirements: While performing the duties of Engineering Intern, the employee is occasionally required to stand; walk; sit; use hands to finger, handle, or feel objects, tools or controls; reach with hands and arms; climb stairs; balance; stoop, kneel, crouch or crawl; talk or hear; taste or smell. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by the job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Engineering Intern Work Environment: While performing the duties of Engineering Intern, the employee is exposed to weather conditions prevalent at the time. The noise level in the work environment is usually moderate. Limitations and Disclaimer: The above is meant to describe the general nature and level of work being performed; it is not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required for the position. All job requirements are subject to possible modification to reasonably accommodate individuals with disabilities. Some requirements may exclude individuals who pose a direct threat or significant risk to the health and safety of themselves or other employees. This job description in no way states or implies that these are the only duties to be performed by the employee occupying this position. Employees will be required to follow any other job-related instructions and to perform other job-related duties requested by their supervisor in compliance with Federal and State Laws. Requirements are representative of minimum levels of knowledge, skills and/or abilities. To perform this job successfully, the employee must possess the abilities or aptitudes to perform each duty proficiently. Continued employment remains on an “at-will” basis.REV 03/14/2019
$28k-44k yearly est. Auto-Apply 7d ago

Learn more about engineering associate jobs

How much does an engineering associate earn in Webb City, MO?

The average engineering associate in Webb City, MO earns between $42,000 and $86,000 annually. This compares to the national average engineering associate range of $49,000 to $101,000.

Average engineering associate salary in Webb City, MO

$60,000

$42,00010%

$60,000Median

$86,00090%

Job type you want

Full Time

Part Time

Internship

Temporary

Zippia Careers
Architecture and Engineering Industry
Engineering Associate Jobs
Locations
Webb City, MO
Engineering Associate Webb City, MO Jobs

Engineering associate jobs in Webb City, MO - 1,613 jobs

Engineering Specialist (Flex Staff)

Project Engineer

Project Engineer

Project Engineer

Project Engineer

Mechanical Engineer (Accident Reconstruction)

Project Engineer

Project Engineer

Project Engineer - Industrial Thermal Systems

Engineering Intern - Summer 2026

Engineering Technician - Manufacturing

Specialist, Manufacturing Engineer

Manufacturing Engineer

Manufacturing Engineer

Manufacturing Engineer

Manufacturing Engineer

Manufacturing Engineer II

Manufacturing Engineer

Manufacturing Analytics Engineer

Engineering Intern

Learn more about engineering associate jobs

How much does an engineering associate earn in Webb City, MO?