Engineering technician jobs in La Homa, TX

Details Sign on Bonus Available! Department: Cath Lab Schedule: Full-time Days Hospital: Seton Medical Center-Williamson Benefits Paid time off (PTO) Various health insurance options & wellness plans Retirement benefits including employer match plans Long-term & short-term disability Employee assistance programs (EAP) Parental leave & adoption assistance Tuition reimbursement Ways to give back to your community Benefit options and eligibility vary by position. Compensation varies based on factors including, but not limited to, experience, skills, education, performance, location and salary range at the time of the offer. Responsibilities Assist with procedures and provide diagnostic aid by conducting organ or body scans on patients. Prepare and position patients and select anatomic and technical parameters accurately. Prepare and administer contrast media and medications within the accepted scope of practice and applicable state and federal regulations. Observe patient during procedure and report abnormal activity. Monitor protocols and recommend updates or refinements as warranted. Follow radiation safety procedures and guidelines. Able to perform all specialized imaging procedures such as angio, complex vascular and nonvascular interventional and therapeutic procedures, along with assisting the Radiologist/PA. Ensure all activities comply with regulatory agency standards. Requirements Licensure / Certification / Registration: BLS Provider obtained within 1 Month (30 days) of hire date or job transfer date required. American Heart Association or American Red Cross accepted. Radiologic Technologist credentialed from the Texas Medical Board obtained prior to hire date or job transfer date required. One or more of the following required: Registered Cardiovascular Invasive Specialist credentialed from the Cardiovascular Credentialing International (CCI) obtained prior to hire date or job transfer date. Cardiographic Tech specializing in Electrophysiology credentialed from the Cardiovascular Credentialing International (CCI) obtained prior to hire date or job transfer date. Radiologic Technologist specializing in Radiography credentialed from the American Registry of Radiologic Technologists (ARRT) obtained prior to hire date or job transfer date. ARRT-VI, ARRT-CI and ARRT-CV also accepted. Advanced Life Support preferred. American Heart Association or American Red Cross accepted. Pediatric Advanced Life Support preferred. American Heart Association or American Red Cross accepted. Education: High School diploma equivalency with 2 years of cumulative experience OR Associate's degree/Technical degree OR 4 years of applicable cumulative job specific experience required. Additional Preferences No additional preferences. Why Join Our Team Ascension Seton, based in Austin, Texas, has provided thousands of associates and caregivers a rewarding career in healthcare since 1902. Ascension Seton operates more than 100 clinical locations in Central Texas and four teaching hospitals, including Dell Seton Medical Center at The University of Texas and Dell Children's Medical Center. Join us and create a career path you will love. Ascension is a leading non-profit, faith-based national health system made up of over 134,000 associates and 2,600 sites of care, including more than 140 hospitals and 40 senior living communities in 19 states. Our Mission, Vision and Values encompass everything we do at Ascension. Every associate is empowered to give back, volunteer and make a positive impact in their community. Ascension careers are more than jobs; they are opportunities to enhance your life and the lives of the people around you. Equal Employment Opportunity Employer Ascension provides Equal Employment Opportunities (EEO) to all associates and applicants for employment without regard to race, color, religion, sex/gender, sexual orientation, gender identity or expression, pregnancy, childbirth, and related medical conditions, lactation, breastfeeding, national origin, citizenship, age, disability, genetic information, veteran status, marital status, all as defined by applicable law, and any other legally protected status or characteristic in accordance with applicable federal, state and local laws. For further information, view the EEO Know Your Rights (English) poster or EEO Know Your Rights (Spanish) poster. As a military friendly organization, Ascension promotes career flexibility and offers many benefits to help support the well-being of our military families, spouses, veterans and reservists. Our associates are empowered to apply their military experience and unique perspective to their civilian career with Ascension. Please note that Ascension will make an offer of employment only to individuals who have applied for a position using our official application. Be on alert for possible fraudulent offers of employment. Ascension will not solicit money or banking information from applicants. This Ministry does not participate in E-Verify and therefore cannot employ STEM OPT candidates.

What we provide: This is a seasonal position at Six Flags Over Texas, in Arlington, TX. It features a competitive hourly rate with perks, such as free entry to any Six Flags Park for all employees with each visit, additional complimentary tickets for friends and family, discounts on food and merchandise for all employees, flexible scheduling and weekly pay available. What you will do: Six Flags Over Texas is looking for a dedicated, organized individual to join the Entertainment Technical Services Team. As an Entertainment Technician, you will be responsible for assisting with the load in and load out of various show products and equipment, running assigned tracks for stage productions and special events, assisting with the installation and maintenance of all sets, props, sound, lighting and video equipment as needed, and working closely with the Technical Services team and Production Staff on any technical services projects as assigned. This individual will also ensure the smooth and safe operation of the assigned shows and special events. How you will do it: Perform daily operational duties to assist the department in the running of assigned show tracks Perform regular inspections of all scenic elements, audio and lighting systems, and special effects (fog machines) Repair and correct any issues quickly and safely to ensure a safe guest and team experience Assist the Technical Services team with new builds and repairs, load ins and load outs, system maintenance and other projects as assigned Effectively communicate with Entertainment Technical Services Leadership on any issues or safety concerns as they arise Operate various tools (including power tools), vehicles and equipment as assigned Adhere to safe work practices and policies that promote a safe work culture for the department and park Must be available to work weekends and all technical rehearsals, as assigned Must be available to work extended hours during specific times of the year Must be able to follow directions provided by the Technical Leadership team What you will need: Must be at least 18 years old. Must be able to work flexible hours on weekends during show and event operations as well as during tech rehearsals as needed Previous technical experience in the Entertainment/ Theme Park Industry preferred Must have some experience in carpentry, construction, or set building as well as some sound and/ or lighting experience Should be proficient in the use of hand tools and various construction equipment or be able to learn quickly Should have a basic knowledge of digital audio and lighting signal flow and be willing to learn the specific equipment used for each show and special event Strong motivated team player with a strong ability to multi-task Strong, verbal and written communication skills Must be able to work on projects independently as well as with a team Must ensure compliance with standard operating procedures, park policies, and regulations Must be able to move or lift tools or equipment weighing up to 50lbs Must be able to work indoors and outdoors in all types of weather conditions Should be able to work at heights of 20 feet or more and occasionally work at heights of up to 100 feet via catwalks, ladders and personnel lifts Valid driver's license to operate company vehicles, if assigned Other Notes: Reports to the Technical Services Supervisor or Lead and/ or the venue stage manager during the run of production or event Must be able to perform all other duties assigned or necessary to support the park operation as a whole Licenses & Certifications Valid Texas Driver's License

Engineering Technician Compensation: $30 - $40 /hour, depending on experience Inceed has partnered with a great company to help find a skilled Engineering Technician to join their team! Join a dynamic and innovative team as an Engineering Technician. This exciting opportunity involves working onsite in New Albany, Ohio, where you'll play a crucial role in supporting engineering projects. The company offers a collaborative atmosphere and values professional growth, making this an ideal opportunity for someone eager to advance their career. Key Responsibilities & Duties: Utilize Spotfire or Power BI for data visualization Query data using Python and SQL Collaborate with engineering teams to support project goals Assist in data analysis and interpretation Maintain accurate records and documentation Contribute to technical problem-solving efforts Support onsite engineering activities Required Qualifications & Experience: Proficiency in Spotfire or Power BI Experience with Python for data querying SQL querying skills Internship or relevant experience in a technical field Strong analytical and problem-solving skills Nice to Have Skills & Experience: Experience with data visualization tools Familiarity with engineering projects Knowledge of additional programming languages Perks & Benefits: 3 different medical health insurance plans, dental, and vision insurance Voluntary and Long-term disability insurance Paid time off, 401k, and holiday pay Weekly direct deposit or pay card deposit If you are interested in learning more about the Engineering Technician opportunity, please submit your resume for consideration. Our client is unable to provide sponsorship at this time. We are Inceed, a staffing direct placement firm who believes in the possibility of something better. Our mission is simple: We're here to help every person, whether client, candidate, or employee, find and secure what's better for them. Inceed is an equal opportunity employer. Inceed prohibits discrimination and harassment of any type and affords equal employment opportunities to employees and applicants without regard to race, color, religion, sex, sexual orientation, gender identity, or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law.

Southend Pharmacy, part of Allia Health Group, is expanding our research and product development efforts to support a growing portfolio of innovative compounded medications. Our R&D team plays a central role in developing new formulations with a focus on precision, quality, and patient safety. Job Summary We are seeking a skilled and detail-oriented Research & Development Compounding Technician to support the preparation of experimental sterile and non-sterile formulations. This role is hands-on and highly collaborative, working directly with pharmacists and product developers on new formulations, product testing, and controlled documentation. The ideal candidate brings strong compounding experience, comfort with lab equipment, and the ability to maintain a clean, compliant laboratory environment. Key Responsibilities Formulation & Compounding ●Prepare sterile and non-sterile research formulations including capsules, creams, ointments, suspensions, solutions, injectables, and syrups. ● Weigh, measure, and mix ingredients using precise technique and calibrated lab equipment. ● Perform potency calculations and assist with formulation trials or process improvements. Product Testing & Documentation ●Support stability studies, compatibility assessments, and basic analytical tests (pH, viscosity, density, particle size). ●Document research batches, maintain lab notebooks, label samples, and ensure accurate tracking of materials. ●Assist in updating SOPs, formulation worksheets, and project-related documents. Laboratory Operations ● Clean, maintain, and calibrate equipment such as capsule machines, mixers, homogenizers, and balances. ● Manage ingredient inventory, monitor supply levels, and request ordering when needed. ● Maintain a safe, organized, and compliant R&D workspace. ● Experience with picnometers and viscometers preferred per hiring manager intake. Cross-Functional Collaboration ● Work closely with pharmacists, QA, and product development teams on ongoing projects. ● Provide observations during formulation trials and support preparations for pilot-scale batches. Required Qualifications ● Pharmacy technician certification ●2+ years of sterile and non-sterile compounding experience (strong 1-1.5+ year candidates considered) ● Familiarity with USP , , and ● Strong knowledge of pharmaceutical calculations and compounding techniques ● Excellent documentation skills and adherence to controlled procedures ● Ability to follow detailed technical instructions and operate lab equipment safely Preferred Qualifications ● Experience in a 503A or 503B compounding environment ● R&D or formula development experience ● Exposure to GMP, GLP, or FDA-regulated settings ● Analytical testing experience (refractometry, pH, viscosity, density) Physical Requirements ● Ability to stand for extended periods, lift laboratory materials, and handle chemicals and equipment safely Compensation & Benefits ●Hourly Range: $25.00 - $30.00, based on experience ● Full medical, dental, vision insurance ● 401(k) with employer contribution ● Paid time off and paid holidays ● Professional development opportunities across Allia Health Group Southend Pharmacy is unable to offer visa sponsorship at this time. Candidates must be legally authorized to work in the United States without current or future sponsorship. Equal Opportunity Employer Statement Allia Health Group is an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status. If you have any questions or require accommodations during the application process, please contact *************************.

A leading Western apparel brand is seeking a skilled Apparel Technical Designer to support and elevate their growing menswear and womenswear categories. This role is highly collaborative and hands-on, working closely with design, production, and global vendors to bring concepts to life with accuracy, quality, and consistency. Ideal for a Technical Designer ready for growth or a Senior Technical Designer looking to influence processes, improve standards, and mentor others. About the Role: The Technical Designer will be responsible for driving fit consistency, garment engineering, and technical execution across multiple product lines. This position plays a key role in product development, fittings, vendor communication, and maintaining high-quality standards throughout the production cycle. Key Responsibilities: Translate design concepts into detailed tech packs, specifications, and graded measurements Build, maintain, and evolve fit blocks, grading standards, and technical libraries Lead fittings on mannequins and live models; provide clear fit direction and technical adjustments Ensure accuracy in construction details, patterns, and fit to reduce sample iterations Partner with cross-functional teams and overseas vendors to meet production milestones Manage seasonal calendars, WIPs, timelines, samples, and approvals Support vendor visits and occasional international travel Contribute to process improvements and adoption of new technologies Required Qualifications: Strong expertise in garment construction, fit, and patternmaking Proficiency with Gerber AccuMark (required) Experience across menswear and womenswear, including knits and wovens Proven experience creating tech packs, specs, and graded measurement charts Strong skills in Adobe Illustrator, Microsoft Office, and PLM systems Excellent communication, organization, and project management abilities Bachelor's degree in Fashion Design, Apparel Design, or related field Preferred Qualifications: Experience with Centric PLM Experience with Clo3D

About Us: LTIMindtree is a global technology consulting and digital solutions company that enables enterprises across industries to reimagine business models, accelerate innovation, and maximize growth by harnessing digital technologies. As a digital transformation partner to more than 700+ clients, LTIMindtree brings extensive domain and technology expertise to help drive superior competitive differentiation, customer experiences, and business outcomes in a converging world. Powered by nearly 90,000 talented and entrepreneurial professionals across more than 30 countries, LTIMindtree - a Larsen & Toubro Group company - combines the industry-acclaimed strengths of erstwhile Larsen and Toubro Infotech and Mindtree in solving the most complex business challenges and delivering transformation at scale. For more information, please visit ******************* Job Title: Rework/Soldering Technician with platform support(Onsite) Work Location: Austin, TX Job Description Soldering rework technician Knowledge on computer hardware Motherboards CPUs Memory DIMMs Addon cards Hard drives HDDs KVMs etc Ability to read electronic schematics PC board files BOM data etc Knowledge on IPC soldering standards Experience in soldering desoldering various SMT components fine pitch IC packages BGAs various connectors etc Experience in building custom cables Blue wire rework on multilayer PC boards Must be very skilled in Soldering rework domain Other Expectations from Candidate Attention to detail and well organized Able to lift 35 Lbs job may require shifting computers from one rack to another etc Candidate should have reliable transportation and are OK with daily commute as it is 100 onsite work Candidate must have good attitude communication skills Willingness to learn Benefits/perks listed below may vary depending on the nature of your employment with LTIMindtree (“LTIM”): Benefits and Perks: Comprehensive Medical Plan Covering Medical, Dental, Vision Short Term and Long-Term Disability Coverage 401(k) Plan with Company match Life Insurance Vacation Time, Sick Leave, Paid Holidays Paid Paternity and Maternity Leave The range displayed on each job posting reflects the minimum and maximum salary target for the position across all US locations. Within the range, individual pay is determined by work location and job level and additional factors including job-related skills, experience, and relevant education or training. Depending on the position offered, other forms of compensation may be provided as part of overall compensation like an annual performance-based bonus, sales incentive pay and other forms of bonus or variable compensation. Disclaimer: The compensation and benefits information provided herein is accurate as of the date of this posting. LTIMindtree is an equal opportunity employer that is committed to diversity in the workplace. Our employment decisions are made without regard to race, colour, creed, religion, sex (including pregnancy, childbirth or related medical conditions), gender identity or expression, national origin, ancestry, age, family-care status, veteran status, marital status, civil union status, domestic partnership status, military service, handicap or disability or history of handicap or disability, genetic information, atypical hereditary cellular or blood trait, union affiliation, affectional or sexual orientation or preference, or any other characteristic protected by applicable federal, state, or local law, except where such considerations are bona fide occupational qualifications permitted by law. Safe return to office: In order to comply with LTIMindtree' s company COVID-19 vaccine mandate, candidates must be able to provide proof of full vaccination against COVID-19 before or by the date of hire. Alternatively, one may submit a request for reasonable accommodation from LTIMindtree's COVID-19 vaccination mandate for approval, in accordance with applicable state and federal law, by the date of hire. Any request is subject to review through LTIMindtree's applicable processes

Pay: up to $32/hr o w2 (No C2C or 3rd parties) We are seeking a highly skilled and detail-oriented Laboratory Instrument Technician to support the calibration, qualification, and performance maintenance of laboratory equipment. This role is essential for ensuring data integrity, regulatory compliance, and operational efficiency across our lab systems. Key Responsibilities: Perform routine and scheduled calibrations of laboratory instruments (e.g., HPLC, GC, balances, spectrophotometers). Execute preventive maintenance and performance checks in accordance with SOPs and manufacturer specifications. Lead and support instrument qualification activities (IQ/OQ/PQ) for new and existing equipment. Collaborate with QA and IT teams to implement and maintain Computer System Validation (CSV) and Computer Software Assurance (CSA) protocols. Troubleshoot equipment issues and coordinate repairs or service with vendors. Maintain accurate records of calibration, qualification, and validation activities in compliance with regulatory standards (e.g., GMP, GLP, ISO 17025). Assist in audits and inspections by providing documentation and technical support. Qualifications: Minimum 2-3 years of experience in laboratory instrument calibration and maintenance. Hands-on experience with instrument qualification protocols (IQ/OQ/PQ). Working knowledge of CSV and CSA frameworks in regulated environments. Familiarity with quality systems and regulatory requirements (FDA, EMA, ISO). Strong documentation and organizational skills. Preferred Skills: Experience with calibration management software and electronic documentation systems. Understanding of data integrity principles and risk-based validation approaches. Certification in instrumentation, metrology, or validation (e.g., ASQ CCT, GAMP) is a plus. Other responsibilities as needed: Ensure that lab cleanliness and safety standards are maintained. Develop and qualify new testing methods. Train other analysts to perform laboratory procedures and assays. Perform visual inspections of finished products. Participate in internal assessments and audits as required. Identify and troubleshoot equipment problems. Evaluate new technologies and methods to make recommendations regarding their use. Serve as a technical liaison between quality control and other departments, vendors, or contractors. Coordinate testing with contract laboratories and vendors. Write technical reports or documentation such as deviation reports, testing protocols, and trend analyses. Write or revise standard quality control operating procedures. Supply quality control data necessary for regulatory submissions. Receive and inspect raw materials. Review data from contract laboratories to ensure accuracy and regulatory compliance. Prepare or review required method transfer documentation including technical transfer protocols or reports. Perform validations or transfers of analytical methods in accordance with applicable policies or guidelines. Participate in out-of-specification and failure investigations and recommend corrective actions. Monitor testing procedures to ensure that all tests are performed according to established item specifications, standard test methods, or protocols. Investigate or report questionable test results. Interpret test results, compare them to established specifications and control limits, and make recommendations on appropriateness of data for release. Identify quality problems and recommend solutions. Evaluate analytical methods and procedures to determine how they might be improved. Complete documentation needed to support testing procedures including data capture forms, equipment logbooks, or inventory forms. Calibrate, validate, or maintain laboratory equipment. Compile laboratory test data and perform appropriate analyses. Conduct routine and non-routine analyses of in-process materials, raw materials, environmental samples, finished goods, or stability samples.

Great new opportunity for an Industrial Electrician! The ideal applicant will perform maintenance and repair operations necessary to keep plant, equipment, machinery and tools in good operating condition, working in the many diversified capacities required in electrical maintenance. Make all necessary mechanical repairs to electrical equipment, including the replacement, repair and installation of bearings, gears, shafts, pins, couplings, etc. Analyze all types of circuits, wiring diagrams and drawings as required to install, repair, adjust, calibrate, program, time, construct, modify or service all types of materials and electronic or electrical tools. Designs, installs, troubleshoots and implements programs for programming logic controllers, calibrate, program, design, test and adjust any type of integrated, indicating or graphic electrical or electronic instruments or controllers, pressure and flow meters, combustion control equipment, regulator, timing devices, pyrometers. Detect and report faulty material, environmental hazards, and/or improper operation of plant equipment or machinery; refer questionable and unusual matters to proper supervision. Follow all safety regulations and practices. The above statements are intended to describe the general nature and level of work being performed by people to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties and skills of personnel so classified. Requirements High School/GED required. 2+ years working in an industrial environment on a mechanical maintenance craft. Experienced working in extreme weather conditions. Willing to climb, bend, stand, or lift items. Strong mechanical aptitude. Must be able to pass a written test, Face-to-face interview, and a hands on assessment. Wages & Benefits Optimus Steel has a competitive benefit package. Medical/Prescription Dental, Vision, Health & Dependent Care FSA 401K, Company match Basic Life/Accident Insurance Employee Assistance Program Salary Description $35.37 - $44.77 Per-hour

Adecco Creative and Marketing has partnered with a timepiece designer to hire an Archives Specialist. Job Title: Archives Specialist Schedule: 20 hours/week, no OT Duration: 6-12 weeks Pay Rate: $25-$30/hr (based on experience). This is W2, not 1099. We are seeking a talented Brand Archives Specialist to join our team. In this role, you will support the documentation, preservation, and organization of historic watch collections. An ideal candidate will possess a strong attention to detail, a librarian mindset, and a passion for cataloging and maintaining archival systems. What you will do in this role ● Catalog watches and accessories by documenting product details, features, materials, and release information ● Maintain and update archival databases to ensure accuracy and accessibility ● Organize physical archive inventory, including labeling, storage, and preservation of items ● Support digitization of archive materials, including product photography and metadata entry ● Assist with archival research and improvement of organizational systems ● Ensure proper handling and care of vintage and delicate products Who You Are ● Bachelor's degree or equivalent experience in Library Science, Museum Studies, Archival Studies, History, or related field ● Experience in cataloging, archival work, museum collection support, or similar role ● Strong organizational skills and exceptional attention to detail ● Experience with cataloging systems, metadata standards, or digital asset management tools ● Ability to work independently and manage priorities ● Preferred: familiarity with fashion archives or product collections ● Preferred: experience with photography for cataloging Fine print: This is a W2 position. Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. There is no PTO or holiday pay for contracts. Sick leave is accrued where applicable, check your state laws. Equal Opportunity Employer/Veterans/Disabled Must be authorized to work in the U.S. without employer sponsorship. To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to ******************************************* The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: *The California Fair Chance Act *Los Angeles City Fair Chance Ordinance *Los Angeles County Fair Chance Ordinance for Employers *San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Ready to take your EEG skills on the road? Join SynapseTBI, a fast-growing neurodiagnostics team, and bring life-changing testing to patients across the country. We're looking for a motivated Ambulatory EEG Technologist who loves patient care, enjoys flexibility, and is excited about a career that blends healthcare with travel. Company Description SynapseTBI offers a comprehensive protocol of objective diagnostic testing for the diagnosis of Traumatic Brain Injuries (TBI), Mild Traumatic Brain Injuries (mTBI), and Post Concussion Syndrome. Recommended and validated by the American College of Occupational and Environmental Medicine (ACOEM) for "Post TBI Patients who either have symptoms of cognitive deficits and/or have sustained a TBI sufficient to cause same", our services also include neurologist consultations, recommended treatment plans, psych evaluations, in-home TBI treatment programs including Neurofeedback, and life care plans. Role Description This is a travel role for an ERP/EEG Technician, primarily covering the Midwest Regions, preferably based in Texas. The EEG Technician will be responsible for performing Neurodiagnostic Testing, assisting with epilepsy and neurophysiology studies, ensuring patient care, and working closely with medical professionals to conduct diagnostic tests, assessments and treatments. What You'll Do: ✨ Travel to patient homes, clinics, and partner sites to set up and remove ambulatory EEG studies and/or run ERP testing along with other TBI diagnostic studies ✨ Apply electrodes and ensure clean, accurate data collection ✨ Teach patients and families how the test works and answer their questions with confidence ✨ Keep equipment in top shape and maintain detailed study records ✨ Represent our company with professionalism, compassion, and a patient-first mindset What We're Looking For: ✔️ EEG experience preferred, but not required (we will teach the testing for the right candidate) ✔️ Someone that works well on their own and doesn't require a micro-manager ✔️ Credentialed techs (R. EEG T.) a plus - but not required ✔️ Someone flexible, detail-oriented, and ready to travel ✔️ Strong communication skills and a passion for helping patients ✔️ A valid driver's license and reliable transportation required Why You'll Love It Here: 🌎 Travel nationwide with all lodging and travel expenses covered 💰 Competitive salary + a comprehensive bonus plan 🩺 Full benefits (health, dental, vision, PTO) 📈 Ongoing training and career growth opportunities 💡 Work with a supportive team that values your expertise If you're looking for a career that takes you beyond the walls of a hospital and gives you the chance to explore new places while making a difference in patients' lives-this is it.

/RESPONSIBILITIES Provides and administers competent Hyperbaric Medicine services to patients as prescribed by the Physician. Responsible for safe and effective operation of the hyperbaric chamber(s) and related support systems. Responsible for the safe delivery of hyperbaric oxygen therapy to the hyperbaric treatment. Provide care in accordance with age specific guidelines for each age group as evidenced by the skill/competency checkoffs. Comply with departmental and University Health policies/procedures, and maintain good relations with co-workers and guest. EDUCATION/EXPERIENCE High school diploma or equivalent (GED) required. Wound care center operator must be a healthcare professional actively certified or licensed in one of the following vocations to meet the minimum education and experience requirements: (Respiratory Therapist, Military: Corpsman or Medical Services Specialist, Emergency Medical Technician or Paramedic, Licensed Practical Nurse, Licensed Vocational Nurse, Certified Hyperbaric Specialist, Certified or Registered Medical Assistant, Certified Hyperbaric Technologist, Certified Nursing Assistant, Certified Hyperbaric Wound Specialist, Physical Therapist or Physical Therapy Assistant, other allied healthcare professions as approved by NBDHMT for certification eligibility, individuals who have successfully completed U.S. Department of Defense (DOD) hyperbaric training. Successful completion of a certification program in Hyperbaric Medicine is required by the National Board of Diving and Hyperbaric Medicine Technology, Department of Defense, American College of Hyperbaric Medicine, or Undersea & Hyperbaric Medical Society is required. Must have current American Heart Association, Basic Cardiac Life Support and Healthcare Provider card. ACLS preferred. Maintains competencies, continuing education, and certifications as appropriate. One year of experience required. Must have completed approved Hyperbaric Safety Director Course or attend within 6 months of employment.

Taurus Industrial Group's Specialty Services division is seeking skilled and motivated Field Services Technicians to join our growing team. We provide advanced industrial solutions across power generation, petrochemical, refining, and manufacturing sectors. Our technicians are trusted partners to our clients, delivering precision work in bolting, torquing, machining, induction heating, line-stop, and related specialty field services. If you are a hands-on professional with technical acumen, a safety-first mindset, and the ability to thrive in challenging field environments, we want to hear from you. Key Responsibilities Perform on-site bolting, torquing, tensioning, and induction heating services on critical equipment. Support field machining, hot tapping, and line-stop operations as needed. Install, operate, troubleshoot, and maintain specialized tools and OEM induction equipment. Ensure all work adheres to safety, quality, and compliance standards. Interpret technical drawings, job packages, and client specifications. Collaborate with project managers, supervisors, and customer representatives to ensure timely, accurate, and efficient service delivery. Maintain, calibrate, and prepare rental and company-owned specialty equipment. Travel extensively to client facilities across regional and national assignments. Recommended Qualifications & Requirements Experience: Minimum 3-5 years in industrial services, mechanical maintenance, or specialty field service roles (power plants, refineries, petrochemical, or heavy industry preferred). Certifications/Training: NCCER, OSHA, or equivalent field qualifications (preferred). OEM training on induction heating or bolting/tensioning equipment (a plus). Technical Skills: Proficient in hydraulic, pneumatic, and electronic tool operation. Familiarity with torque/tension charts, machining tolerances, and mechanical fit-up. Physical Requirements: Ability to lift to 50 lbs, work at heights, and endure confined space conditions. Willingness to work extended shifts, nights, weekends, and travel on short notice. Soft Skills: Strong commitment to safety and quality. Clear communication and problem-solving skills. Team-oriented with the ability to adapt to dynamic field environments. Why Join Taurus Industrial Group? Competitive pay with overtime opportunities. Comprehensive benefits: health, dental, vision, 401(k), PTO. Professional training and advancement opportunities. Exposure to cutting-edge specialty service technologies and OEM equipment. Be part of a growing, innovative company that values technical excellence and field expertise. 📍 Locations: Nationwide travel, with primary needs in Texas, Gulf Coast, Northeast, Midwest, and Western U.S. BE SURE TO APPLY ON OUR WEBSITE: ****************

←Back to all jobs at FORCE PRESSURE CONTROL LLC Senior Production Technician | BOP FORCE PRESSURE CONTROL LLC is an EEO Employer - M/F/Disability/Protected Veteran Status OFS Facility Operations | BOP & Surface Pressure Control Equipment Force Pressure Control is seeking safety-oriented production personnel to work in its Permian facility in Odessa, TX. Production personnel will be tasked with inspection, rebuild, and maintenance of blowout preventer inventory and associated equipment. Production personnel may, at times, be required to perform field-related tasks including, but not limited to, the rigging up / down of equipment, function testing, pressure testing, component alterations, etc. Working background with BOP and other wellhead / surface pressure control equipment is required. The Senior Production Technician position is a full time, non-exempt position. Hourly pay rate commensurate with experience. Applicants have rights under Federal Employment Law. Please visit our careers page to see more job opportunities.

TDA - ACP - Metrologist (Laboratory Technologist/QA/QC Lab Technician/Calibration/Measurement/Technician) (57246) (00054582) Organization: DEPARTMENT OF AGRICULTURE Primary Location: Texas-Giddings Work Locations: METROLOGY LAB GIDDINGS 1258 County Road 226 Giddings 78942 Job: Farming, Fishing, and Forestry Employee Status: Regular Schedule: Full-time Standard Hours Per Week: 40. 00 Travel: Yes, 10 % of the Time State Job Code: 1325 Salary Admin Plan: B Grade: 20 Salary (Pay Basis): 4,650. 00 - 4,900. 00 (Monthly) Number of Openings: 1 Overtime Status: Non-exempt Job Posting: Dec 17, 2025, 5:22:02 PM Closing Date: Jan 8, 2026, 5:59:00 AM Description METROLOGIST (Laboratory Technologist/QA/QC Lab Technician/Calibration/Measurement/Technician) Salary Information: B20, $4,650. 00 - $4,900. 00/MO. State Classification: Inspector V - 1325FLSA Status: NonexemptPosting Number: 26-57246-1RLocation: Giddings, TXTelework Option: TDA does not offer telework, and all employees are required to be physically present for work. HOW TO APPLYApply online via CAPPS. Applicants applying in WIT must complete the supplemental questions to be considered for the position. To complete the supplemental questions, go to CAPPS Recruit. WHO ARE WE The Texas Department of Agriculture's (TDA) Agriculture & Consumer Protection Division administers consumer protection programs which includes overseeing items like grocery store scales, egg quality, nursery products, licensing and training pesticide applicators, worker protection and registering pesticides for sale. TDA's consumer protection efforts promote success, unity and prosperity for the people of Texas. WHAT YOU'LL DOThe Metrologist will perform advanced inspection work in the state metrology lab. You will work on planning, developing, and implementing measurement standards according to National Institute of Standards and Technology (NIST) Office of Weights & Measure (OWM) requirements. You will serve as a state legal signatory, technical consultant and liaison with industry and government agencies. You may train others. You will test, calibrate, and certify standards within the calibration and measuring capabilities of the lab for other labs, industry and governmental jurisdictions. You will work under minimal supervision with considerable latitude for the use of initiative and independent judgment. PRIMARY RESPONSIBLITIES Perform metrological calibrations on artifacts received within the calibration and measuring capabilities (scope) of the lab, in a manner that is metrologically traceable through NIST to the International System of Units (SI). Compile and generate official calibration certificates as an approved signatory according to the international standards requirements for reporting results in ISO/IEC 17025, Handbook 143 and NVLAP Handbook 150. Facilitate lab traceability, quality control, technical standards compliance and laboratory's calibration program. Develop and maintain calibration spreadsheets, calibration control charts, and a variety of statistical computations to monitor quality performance. Contribute to the development and compilation of the annual NIST Recognition submission packet and to any required submission for accreditation approval. Contribute to the development and establishment of lab policy and procedures addressing the management system objectives, quality, purchasing, complaints, non-conforming work, improvements, corrective actions, root cause analyses, identification of training needs, and environmental conditions. Comply with requirements, laws, regulations, NIST handbook requirements, standard operating procedures, policies, and procedures for the state metrology laboratory. Assist with preparing and reviewing literature, statutes, rules, and international standards. Participate in training activities by participating in regional measurement assurance program training sessions, webinars, proficiency testing / inter-laboratory comparisons and other mandatory training required to retain metrologist signatory credential. Assist with the training of laboratory staff on metrology, quality, and technical topics. Contribute to the effective laboratory administrative operations, by recording lab meeting minutes, compiling, and generating technical reports, budget prioritization, and legislative information reports. Contribute to and participate in collaborative meetings, including laboratory staff meetings, regional measurement assurance meetings, and management review meetings. Receive and respond to telephone inquiries and provides consultation to external customers and agency staff regarding metrology, quality, and technical topics. Routinely conduct internal audits to determine trends and resolve technical problems; perform root cause analyses; and recommend corrective, preventative or improvement actions to lab manager. Conduct risk assessment audits to identify, analyze, evaluate, and treat risk primarily concerning safety, economic, ethical and measurement quality in the metrology lab. Ship and receive artifacts including loading and unloading of large trucks. Perform ground and building maintenance duties inside and outside the laboratory. Follow all TDA policies and procedures. Perform other duties as assigned. Qualifications QUALIFICATIONS/REQUIREMENTS FOR THE POSITION (The application must state how each of the following qualifications are met - resumes do not take the place of the required state of Texas application which must be completed in CAPPS or WIT. ) Bachelor's degree (one year work experience related to the essential duties may substitute for one year of college). Minimum (1) year work experience in a laboratory environment, measurement, natural science or related science. Completion of NIST's Mass and Volume classes, including LAP problems or successful completion within 24 months. Bachelor's degree with major course work in Mathematics or Science may substitute for the required work experience. PREFERRED QUALIFICATIONSWork experience performing statistical computations for determining process controls and quality management. Work experience in consumer protection and/or weights and measures KNOWLEDGE, SKILLS & ABILITIESKnowledge of laws, codes, standards, and regulations related to the area of responsibility; of the principles and methods of inspection and quality control; and of business practices in regulated occupations and industries. Skill in conducting inspections; in determining proper courses of action; in using instruments or tools necessary to perform inspections; in using a computer and applicable programs and databases; in providing customer service excellence to both internal and external customers; and in maintaining records and written reports. Ability to prepare reports; to interpret laws and regulations; to gather and analyze data; to communicate effectively, orally and in writing; to exercise sound judgment and discretion; and to maintain the highest level of confidentiality. PHYSICAL REQUIREMENTS & WORKING CONDITIONSWork is performed in both an office and a laboratory. Work involves safely lifting and carrying 50-100 pounds repeatedly and remaining stationary for extended periods of time. May involve walking; standing; pushing and pulling; kneeling, stooping, and bending; and travel, occasionally overnight. Also involves operating a precision laboratory balance, forklift, and overhead hoist. Involves infrequent exposure to gaseous fumes and chemicals at levels within allowable short term exposure levels. May involve travel (up to 10%), occasionally overnight. H-1B Visa SponsorshipWe are unable to sponsor or take over sponsorship of an employment Visa. BENEFITSThe State of Texas offers a variety of benefits for you and your family that are comprehensive and, on average, make up about one-third of total compensation. Benefits include:* Retirement Plan * Paid Group Health & Life Insurance for employees * Paid Holidays * Paid Vacation Leave* Paid Sick Leave * Longevity Pay* Dental * Vision* Dependent Optional Life Insurance * Voluntary AD&D Insurance* Dependent Health & Life Insurance * Health & Dependent care flexible spending accounts Only candidates selected for an interview will be contacted. A skills exercise may be conducted at the time of the interview. Due to the high volume of applications, we do not accept telephone calls. If you submitted your application through the CAPPS Career Center, you may also check the status of your application by accessing your profile and selecting My Jobpage and selecting My Submissions. *A valid government-issued driver's license, which is recognized by the Texas Department of Public Safety and in good standing, and an acceptable driving record are required. TDA will verify this information with the Texas Department of Public Safety. Applicants with a driver's license not issued by the State of Texas should obtain and be prepared to provide a copy of their current driving record on or before their first day Background Checks: A criminal conviction records check is required for applicants who are selected for a position. Equal Employment Opportunity (EEO): TDA is an equal employment opportunity (EEO) employer and does not discriminate on the basis of race, color, religion, sex, national origin, disability, age, genetic information, military status, or protected activity. Reasonable Accommodations: If you are scheduled for an interview and require any reasonable accommodation in our interview process, please inform the hiring representative who calls you to schedule your interview or an HR representative at ************. Whenever possible, please give the hiring or HR representative sufficient time to consider and respond to your request. TDA participates in E-Verify and will provide the Social Security Administration and, if necessary, the Department of Homeland Security, with information from each new employee's Form I-9 to confirm work authorization. Military and Former Foster Child Employment Preference: TDA complies with the provisions of the veterans and former foster child employment preference acts. Please contact our Human Resources-Veterans Liaison at ************** for assistance. Go to ************************** com/, ************ onetonline. org/, or *********** careeronestop. org/ for assistance in translating your military experience and training courses into civilian job terms, qualifications/requirements, and skill sets. Additional Military Occupational Specialty (MOS) Code or Crosswalk information is available from the Texas State Auditor's Office at Compliance, Inspection and Investigation MOS Codes.

# **Sr\. Production Technician** **Company:** Expand Energy Our core values - Stewardship, Character, Collaborate, Learn, Disrupt - are the lens through which we evaluate every business decision\. As a dynamic, growing company that offers extremely competitive compensation and benefits, our employees are our most valued assets and the foundation of Expands performance among our E&P competitors\. We seek applicants from all backgrounds to ensure we get the best, most creative talent on our team\. We realize that, historically, underrepresented groups feel the need to be 100% qualified in order to apply\. If you meet any combination of our requirements, we encourage you to apply\. We strive to hire people from a wide variety of backgrounds, not just because it's the right thing to do, but because it makes our company stronger\. ## **Job Summary** This senior level position coordinates with other departments as needed to resolve problems and provide technical support in order to assist with engineering operations\. ## **Job Duties & Responsibilities** + Performs data management activities, which include report/tool creation, loading/entering, verifying, manipulating, analyzing, and reporting data related to engineering operations + Performs engineering calculations and preliminary analyses for interpretation of data and provides information to engineers + Performs advanced data analysis and makes recommendations based on interpretation of data + Recommends design improvements using complex, but established procedures + Coordinates data transfer and updates shared data sources among departments + Utilizes software to discover trends in operational data and reports + Applies skills and concepts to ensure data integrity, data reliability, and data accessibility throughout the group + Provides basic, discipline\-specific training to new systems users + Performs other duties as assigned ## **Job Specific Skills** + Advanced ability to use rigorous logic, critical thinking skills, and methods to solve difficult problems with effective solutions + Advanced ability to build numerical and analytical tools using standard industry and corporate software + Strong knowledge of Production, Capital/Expense, and Workover reports + Strong knowledge of PC/mainframe systems + Strong knowledge of database application software + Ability to communicate well across multi\-disciplinary teams, including teams that are geographically separated + Ability to learn and apply new concepts ## **Education** Minimum: High school diploma or GED Preferred: Bachelor's degree \- from accredited university \- Engineering Technology, Math, Science, or related field ## **Experience** Minimum: 5 \- 8 years related work experience Expand Energy takes necessary action to ensure that all applicants are treated without regard to their race, color, religion, sex, sexual orientation, age, gender identity, national origin, genetic information, disability, pregnancy, military or veteran status or any other protected characteristic as established by law\. Expand Energy Corporation's operations are focused on discovering and developing its large and geographically diverse resource base of unconventional oil and natural gas assets onshore in the United States\. **Nearest Major Market:** Houston **Job Segment:** Gas, Gas Technician, Engineer, Database, Mainframe, Energy, Engineering, Technology

A great Client in Odessa is seeking to find an Electromechanical Tech - Job description:This position is for an industrial field services company operating with high standards of field and shop services in the Permian Basin. They value safety, quality, expertise and customer success while striving to maintain their employees work life balance. Role Summary/Purpose: The Electromechanical Technician, performs a wide variety of tasks both in shop and in the field involving electric motors, generators, switch gear, transformers and other powered equipment. Responsibilities include dismantling, rewinding, brazing, insulating, bracing, re-wedging, working with epoxies, retaining ring removal & refitting. Work is performed in accordance with approved instructions and direction of the shop manager.Essential Functions: Inspects motor/generator equipment for damage and evidence of malfunctions. Refurbishes, tests and rewinds motors/generators and repairs other electromechanical equipment. Dismantles and/or strips damaged or unserviceable mechanical equipment. Operates mobile equipment, tools & machinery efficiently and accurately. Maintains clean work areas, machines and equipment. Ensures correct documentation is used and filled out as specified on inspection and test plans, work instructions and any quality documents. Ensures that all specified records are correctly taken, reviewed and approved. Ensures that work is carried out in a safe manner and that relevant Safety and Quality documentation is complete for the task in hand. Ensures all lifting equipment is correctly used, and prior to use confirms its current inspection status. Ensures all work under their control is properly protected against damage while in the workshop or on site and correctly packages equipment for transport to ensure protection against damage. Complete all online and classroom training sessions. Qualifications/Requirements Willingness and flexibility to travel locally when required on short notice including off hours call outs. Minimum 3 years of experience with maintenance, repair of electromechanical equipment. Computer proficiency in MS Word, Excel and general use. Solid communication, planning, technical and people skills Ability to demonstrate strict compliance to safety standards Able to work without supervision and able to execute tasks when engaged on solo basis Able to work in a team environment and cooperate with fellow workers. Ability to clearly communicate in writing and verbally in English is a must. Capable and qualified to perform field work. Desired Characteristics Maintains a consistently high standard of housekeeping Ensures proper use and storage of equipment and chemicals Works safely at all times Capable of creative thinking and quick problem solving Innovative Team player Self-motivated Job Type: Full-time License/Certification: Driver's License (Required) Willingness to travel: 25% (Preferred)

Saronic Technologies is a leader in revolutionizing autonomy at sea, dedicated to developing state-of-the-art solutions that enhance maritime operations through autonomous and intelligent platforms. We're seeking an Electromechanical Technician to ensure the operational readiness and reliability of our autonomous surface vessels for the DoD. You will be responsible for diagnosing, repairing, and maintaining ASVs and remain instrumental in sustaining mission-critical assets and ongoing operations. Responsibilities * Conduct comprehensive diagnostic assessments of ASVs and their components to identify issues and malfunctions * Perform timely and efficient repairs, replacements, and adjustments to restore ASVs to optimal functionality * Collaborate closely with engineering and technical teams to troubleshoot complex problems and implement effective solutions * Conduct thorough testing and quality assurance procedures to validate repairs and ensure compliance with performance standards * Document all repair activities, including findings, procedures, and outcomes, adhering to company protocols and industry regulations * Maintain an organized inventory of spare parts, tools, and equipment necessary for depot repair operations * Assist in the development and optimization of repair procedures and protocols to enhance efficiency and effectiveness * Provide technical support and training to field technicians and end-users as needed Qualifications * Associate degree or technical certification in electronics, mechanical engineering, or a related field. Bachelor's degree preferred * Experience in depot-level repair and maintenance of complex electronic and mechanical systems, preferably in the maritime or defense industry * Proficiency in troubleshooting, diagnosing, and repairing electrical, electronic, and mechanical components and systems * Familiarity with autonomous systems, marine navigation, and control systems is preferred * Strong analytical and problem-solving skills with attention to detail * Experience working with the DoD or government contracts is a plus Benefits * Medical Insurance: Comprehensive health insurance plans covering a range of services * Saronic pays 100% of the premium for employees and 80% for dependents * Dental and Vision Insurance: Coverage for routine dental check-ups, orthodontics, and vision care * Saronic pays 99% of the premium for employees and 80% for dependents * Time Off: Generous PTO and Holidays * Parental Leave: Paid maternity and paternity leave to support new parents * Competitive Salary: Industry-standard salaries with opportunities for performance-based bonuses * Retirement Plan: 401(k) plan * Stock Options: Equity options to give employees a stake in the company's success * Life and Disability Insurance: Basic life insurance and short- and long-term disability coverage * Additional Perks: Free lunch benefit and unlimited free drinks and snacks in the office Physical Demands * Ability to perform physically demanding work for extended periods of time, up to 12 hours/day * Frequently and repetitively, lift, push and carry up to 20 lbs. * The ability to carry 20 lbs. up and down stairs * Ability to work outside for an extended period of time * Frequently and repetitively, bend, lift and reach to install vehicle parts of varying size and weight overhead, accurately and in allotted timeframes * Ability to stand and walk for up to 12 hours/day, including over varied and uneven terrain * Stoop, lay, bend, reach, squat, kneel, crouch, twist and crawl for extended periods of time, including up to 12 hours/day * Climb and maintain balance on ladders, platforms, or other high structures * Ability to find issues in a work process and be alert to safety signals using sight, touch, and hearing * Demonstrated ability to handle and manipulate tooling and mechanically fasten bolts within required cycle time * Exposures to hazardous materials and ability to follow waste handling/disposal procedures * Wearing Personal Protective Equipment, including but not limited to safety glasses, safety shoes, hearing protection, gloves and adhering to prescribed safety rules and guidelines This role requires access to export-controlled information or items that require "U.S. Person" status. As defined by U.S. law, individuals who are any one of the following are considered to be a "U.S. Person": (1) U.S. citizens, (2) legal permanent residents (a.k.a. green card holders), and (3) certain protected classes of asylees and refugees, as defined in 8 U.S.C. 1324b(a)(3). Saronic does not discriminate on the basis of race, sex, color, religion, age, national origin, marital status, disability, veteran status, genetic information, sexual orientation, gender identity or any other reason prohibited by law in provision of employment opportunities and benefits.

Under general supervision, the SCADA Technician performs a variety of technical tasks in support of the SCADA system to include calibrating equipment, performing overall maintenance and correcting problems with equipment; providing technical support; serving as first responder to outages and equipment failures; coordinating work; and documenting work activities. Posted pay range is the starting salary. Pay rate offered is based on experience. Examples of Duties * Troubleshoot SCADA field equipment demonstrating knowledge on how to operate HMIs and using database historians to identify faults. * Repairs and maintains SCADA by diagnosing problems using schematic drawings, monitoring software, and digital test equipment; repairs, replaces and reprograms by diagnosis; performs routine maintenance on SCADA system components; performs visual and machine aided inspections, installs and inspects weatherization. * Builds SCADA by assembling parts to form a working product; tests assembly prior to deployment; deploys, assembles, and integrates field and human machine interface. * Maintains UPS equipment by diagnosing software to measure uninterruptable power supply capacity; replaces batteries if capacity is low; replaces UPS if unit fails. * Calibrates instruments by using test equipment; performs periodic calibrations to verify monitoring instruments are within limits; directs others to perform calibrations. Experience and Training * Associate degree, diploma, or equivalent from a college, technical, business, vocational, or correspondence school. Additional work experience may substitute for education on a year-for-year basis. * At least one (1) year of experience as a SCADA technician or in a similar position. * Must have experience in process meters for generating analog signals and troubleshooting low voltage digital signals. Certificates and Licenses Required * Valid Class C driver's license. * Obtain Wastewater Operator C License from Texas Commission on Environmental Quality within two (2) years of employment. * Required to obtain a Wastewater Operator D License within 6 months after hire.

2551 Valmont Dr Brenham Texas 77833-5418 **_Why Valmont_** **We're Here to Move the World Forward.** Valmont impacts millions of people around the world every day, yet they might not realize the many ways. Our technology is helping feed the growing population, supplying the world with more reliable energy and access to renewables, enhancing connectivity in remote and urban locations to create a sustainable future and so much more. Simply put, Valmont is advancing agricultural productivity and reimagining vital infrastructure to make life better. Join a _Fortune_ 1000 company that respects hard work, honors diversity and invests in our employees as we focus on creating the world of tomorrow, today. _We are the modern workforce_ . Are you ready to move the world forward? Apply now. **A Brief Summary of This Position** The Electromechanical Technician 13 performs highly skilled technical work in areas of installation, maintenance, and repair of electrical, electronic, and mechanical equipment with a wide knowledge and high degree of proficiency. Responsibilities include new installations of equipment, major repairs and replacements. The technicians help perform electrical and mechanical troubleshooting and repair plant production equipment. **Shift: 1st (Days)** **Monday through Friday 7am-3pm** **Starting Hourly Pay Rate: $31.46** **Opportunity for step pay increases at 90 days, 1 year & 2 years** **Essential Functions** + Troubleshoot electrical and electronic as well as hydraulic & pneumatic troubleshooting + Service and maintain cranes, lathes, drills, presses, press brakes, shears, robots, tube mills, high frequency induction equipment, distribution equipment, CNC and NC equipment + Perform diagnosis, testing, disassembly, inspecting, precise measuring, repair and re-assembly of plant equipment or components with limited instruction + Perform pneumatic, hydraulic, mechanical, and electrical troubleshooting and repair plant production equipment as needed + Responsible for installation of distribution equipment including gutters, disconnects, conduits and cables following UL and National Electrical Code + Responsible for installation and repair of lighting up to 480V, repair of small fixtures, fans, and appliances while also assisting with repair of welders, wire feeds, plasma cutters, and motors over 110V + Use trouble-shooting aids, such as digital VOM to interpret necessary readings + Record labor and materials and report abnormal conditions and safety hazards + Maintain a neat and orderly work area and perform general housecleaning tasks as needed + May occasionally assist newer co-workers and technicians in lower level tiers with various tasks + Operate all the hoists and forklifts in a safe and efficient manner + Other duties as needed or assigned **Required Qualifications of Every Candidate (Education, Experience, Knowledge, Skills and Abilities)** + High school diploma or GED + 2-3 years of relevant work experience + The ability to climb and work at elevated heights of up to eighty feet + The ability to work over ten hours a week in overtime when required for business needs + One year of previous experience maintaining industrial equipment + One year of previous experience using industrial lifting equipment, cranes or hoists + One year of previous experience using at least one of the following troubleshooting aides: thermography gun, digital VOM, volt, ohm or amp meters + The ability to accurately interpret electrical schematics, blueprints and National Electrical Code books for both AC & DC electrical systems + The ability to read and understand hydraulic and pneumatic valves and prints + Have the mechanical skills to fabricate electrical panels, cut and bend conduit, install the electrical equipment, pull wires, etc. that are common to the trade. + A working knowledge of using Outlook email + Math skills, addition, subtraction, multiplication, division and fractions are used to compute power, current, voltage, resistance, etc. + Experience operating a forklift + Experience welding and fabricating + Self-starter requiring a minimum of supervision and direction + Experience with pneumatic, hydraulic, and mechanical troubleshooting **Highly Qualified Candidates Will Also Possess These Qualifications:** + 5+ years of relevant work experience Graduate of a technical school or apprenticeship program in a related field in Electrical Maintenance + Knows and understands the various types of components used in an industrial environment such as disconnects, motor starters, relays, contactors, motors, transformers, switches (proximity and mechanical), timers, circuit protection, solenoids, etc. + Understands the operation of welders and how to repair them. Requires knowledge of rectifiers and SCRs. **Working Environment and Physical Efforts:** Most of this job is performed in an indoor shop environment. The temperature range can be from 100 degrees in the summer to about 50 degrees in the winter. Most operations may expose employee to some type of disagreeable working conditions (wind, cold, heat, dust, dirt, fumes, noise, vibration, water, or oil). Working conditions may vary with specific work assignments. Some areas of the plant can be a noisy at times with sound levels reaching above 85 decibels. Hearing protection is available for those areas. Safety glasses and metatarsal safety shoes are required at all times in the plant. Gloves are required during certain operations. Face shield is required in addition to safety glasses when grinding. The employee will operate machines that use liquid coolant and may also be exposed to cast iron dust. The employees must be able to spend the entire work shift on their feet within the plant environment. Some outdoor work is required which includes work in conditions with abnormal temperatures. Employee works around material stacked overhead height. Conditions range from clean work to exposure to odors, fumes, drafts, wet conditions, dirt, grease, smoke, dust, noise, high temperatures and low frigid temperatures. These conditions range from severe to mild and can happen daily and in any combination. An Electromechanical Technician works in disagreeable weather conditions nearly 30% of the year. Employee must stand and walk, as well as handle parts, tools and equipment, gripping and grasping, on a frequent to constant basis. On an occasional to frequent basis, operator is required to lift/carry parts. Most weight moved is less than 30 lb. Although a few items do weigh more, a maximum lift of 50 lb. is all that is required. Standing, bending, pivoting, walking and reaching overhead are required during most of the shift. Climbing ladders, pulling wire through conduit, hanging fixtures and electrical components also requires a physical exertion. Lifting, carrying, bending, kneeling, stretching, crawling and working in awkward and/or confined positions is frequent with any electromechanical technician. Some of the physical tasks include hanging gearboxes on top of machines, changing brakes or the motors on cranes. **Mental and Visual Effort** The functions of this job require the employee to be alert at all times. Working in a fast-paced environment as well as the repetitious nature of this job requires both mental and visual concentration. The technician must be able to work quickly to repair plant equipment so operations can resume. There are often high stress situations where the technician needs to be able to work under adverse conditions for long periods of time using intense mental and visual concentration. Good hand to eye coordination with a good sense of depth perception is required at all time. Technicians need to be able to distinguish colors and be capable of reading manuals, schematics, labels, and other printed materials. Adequate hearing is required to diagnose problems with machines and equipment. Mental and visual concentration is needed to prevent injury to oneself, fellow workers and/or damage to the product. The use of any equipment or tools requires the employee to be alert at all times. If employee does not have a valid license from either of these states, the determination of acceptable vision will be made by the Safety Department on an individual basis. **Benefits** Valmont offers employees and their families a comprehensive Total Wellbeing benefit package to ensure their individual and family's overall wellness needs are met. Some offerings are dependent upon the role, work schedule, or location and can include the following: + Healthcare (medical, prescription drugs, dental and vision) + 401k retirement plan with company match + Paid time off + Employer paid life insurance + Employer paid short-term and long-term disability including maternity leave + Work Life Support + Tuition Reimbursement up to $5,250 per year + Voluntary programs like tobacco cessation, Type 2 diabetes reversal, one-on-one health coaching, mortgage services and more Valmont does not discriminate against any employee or applicant in employment opportunities or practices on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, genetic information, veteran status, disability or any other characteristic protected by law. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. If you have a disability and require any assistance in filling out the application for employment email *************************. Valmont is here to modernize vital infrastructure and increase agricultural productivity, sustainably and reliably. We galvanize steel to last a century with minimal environmental impact. We modernize irrigation to feed a growing population by utilizing the latest technology. We harden the electrical grid to enable the delivery of reliable power to millions of homes around the world. And we help make communities everywhere safer, cleaner and more connected through our smart infrastructure technology. Valmont serves two primary markets - agriculture and infrastructure - and seven diverse product lines: Utility, Lighting and Transportation, Telecom, Solar, Coatings, Irrigation and Ag Tech. We manufacture products in 85 facilities spread across six continents, and we do business in 100 different countries. That's what Valmont does. We conserve resources and improve life, finding ways to make innovation and technology beneficial in the real world. + That's the value we add.