Engineering technician jobs in Leander, TX

Job Title: Engineering TechnicianJob Description The Electrical Engineering Technician will be responsible for testing and assembling UAVs, maintaining and upgrading the current fleet, and working on new builds. Responsibilities + Assemble and integrate electromechanical systems for UAV platforms, including wiring, connectors, and structural components. + Fabricate and route wire and cable harnesses according to engineering drawings and industry standards. + Perform functional and continuity testing on electrical systems and subsystems. + Troubleshoot and repair electrical and mechanical issues during assembly and testing phases. + Maintain accurate documentation of assembly processes and test results. + Collaborate with engineering teams to ensure compliance with design specifications and quality standards. + Support continuous improvement initiatives for assembly and testing workflows. Essential Skills + Proficiency in using test equipment and performing electrical assembly. + Experience with electrical design and electromechanical systems. + 3+ years of experience in testing and assembly. + Experience with wire and cable harnesses. + Mechanical knowledge and skills in addition to primarily electrical experience. + Ability to read and interpret engineering drawings, schematics, and wiring diagrams. + Familiarity with Electrical, Schematic, Hardware, and AutoCAD Electrical. Additional Skills & Qualifications + Bachelor's degree in Electrical Engineering preferred, but equivalent experience will be considered. + Design experience is preferred. Work Environment The role is based in a test ranch and manufacturing facility, offering a cool start-up environment where you will have the opportunity to design an aircraft from start to finish. Job Type & Location This is a Contract to Hire position based out of Buda, TX. Pay and Benefits The pay range for this position is $28.00 - $48.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Buda,TX. Application Deadline This position is anticipated to close on Dec 18, 2025. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com (%20actalentaccommodation@actalentservices.com) for other accommodation options.

Engine Tech I - Texas Speed Location is responsible for the Engine Department support as listed below for Texas Speed and Performance. Specific Duties and Responsibilities: Assembles Rocker Arm Sets Responsible for all Rocker Arm assembly components and boxes Engine Tear Down Process (Label components and maintain traceability) Visual Inspection of all blocks from start to finish Wash and clean parts as required Assist in inventory as required Keep Tear Down / Rocker Arm area clean and free of trash Assist with picking parts as required Rod Honing Maintains positive working relationships with manufacturing personnel and other staff members to support a positive workplace environment. Responsible for implementing and enforcing industry standard safety procedures throughout the block department. Performs and executes all other duties assigned by direct manager. Requirements Requirements Dynamic, high-energy individual with a track record as an effective communicator and uses a collaborative approach to problem solving. Exceptional Mechanical Abilities Be able to use Measuring Equipment (Mics, Calipers, Bore Gauge, etc...) Salary Description $17- $20 BOE

Join Contoro Robotics - Revolutionizing Warehouse Automation with Cutting-Edge Robotics At Contoro Robotics, we're on a mission to solve labor challenges through advanced robotic solutions. Headquartered in Austin, TX, our fast-growing startup is transforming the supply chain industry with our flagship warehouse automation technology. Our team is made up of top-tier experts in robotics, AI, and logistics, working together to push the boundaries of automation. We're looking for talented and ambitious individuals to join us on this journey-helping shape the future of robotics while growing alongside a world-class team. If you're passionate about innovation, problem-solving, and making a real-world impact, we want to hear from you! About the Role We're looking for a highly capable Engineering Technician to help bring our robots to life. You'll be responsible for mechanical and electrical assembly, wiring, testing, and troubleshooting across various sub-systems - from drive components to electrical panels and robot arms. You'll work hands-on with tools and equipment in our full fabrication shop and play a key role in building systems from the ground up. Job Responsibilities Perform mechanical assembly of drive systems, pneumatic systems, conveyor systems, and electrical panels. Build and wire electrical panels, including component installation and electrical connections Route cables, wiring, and pneumatic lines with attention to workmanship quality. Configuration of subsystems including PLC, computers, sensors, cameras and motor drivers. Execute functional tests of the full robotic system to confirm the robot is built to engineering requirements. Troubleshoot mechanical, electrical, and software-related system issues Operate shop tools and equipment such as CNC plasma cutters, press brakes, welders, mills, band saws, and hand tools Follow engineering documentation and work closely with the manufacturing lead and engineering team Qualification/Requirements Required: Associate's degree in engineering, manufacturing technology, or related field 3+ years of manufacturing experience in a professional work environment. Strong hands-on mechanical and electrical assembly skills Familiarity with control panels, wiring schematics, and cable management Comfortable using shop equipment and power tools Ability to troubleshoot integrated systems Excellent problem-solving skills and attention to detail. Willingness to work hands-on to build robot prototypes and early production robots Preferred: Experience with robotics or industrial robotic automation systems. Experience with Robot Operating System (ROS) and configuring cameras/sensors is a plus Familiar with Mechanical CAD Assembly Tools (SOLIDWORKS Preferred) What We Offer: Competitive salary and equity options. Comprehensive benefits including health, vision, dental, and 401(k) plans. A vibrant and dynamic work environment where your contributions directly impact the company's success. Opportunities for professional growth in a fast-paced startup setting. Health and Wellness Reimbursement Program Continuous Education Program Free Office snacks Pet friendly office Flexible work hours Employee Recognition NectarHR Ping Pong and entertainment area Paid parental leave PTO and company holidays Team Outings and happy hours

Job Description AI/ML Perception Engineer - Build Autonomous Intelligence for Next-Gen Defense Robotics! Austin, TX | Onsite A rapidly scaling, venture-backed startup is forging the next generation of autonomous defense robotics designed to react in milliseconds to dynamic, high-threat scenarios. As a Principal AI/ML Perception Engineer, you will take the helm of the perception and autonomy stack, shaping the intelligence that powers a fully autonomous robotic system built for real-world deployment. In this early engineering role, you'll architect and implement the full perception pipeline, from sensor fusion and model development to field validation and optimization on embedded platforms. This is a rare zero-to-one opportunity where your work becomes the foundation of the product's decision-making capabilities. You'll see your models running in rugged outdoor environments, influence the platform's long-term technical direction, and help define what modern autonomous defense systems are capable of. About Us We're an emerging technology company focused on building compact robotic systems that can perceive, think, and act autonomously under extreme conditions. Our team blends deep experience in autonomy, machine learning, sensing, and hardware development. We thrive at the intersection of software and real-world constraints, solving complex perception challenges across diverse and noisy environments. Our mission moves fast, demands creativity, and requires engineering excellence at every layer of the stack. Job Duties Build and refine perception pipelines leveraging multi-sensor inputs including camera, IMU, and audio sources Deploy computer vision and ML models tailored for low-latency, compute-limited embedded environments Develop and implement audio-enhanced detection and localization methods using microphone arrays or acoustic sensors Lead the data lifecycle, including collection, annotation, training, validation, and field testing Architect robust real-time sensor fusion frameworks for state estimation and situational awareness Integrate and bring up sensors (cameras, IMUs, microphones) while writing and optimizing low-level drivers Prototype, evaluate, and iterate rapidly through live field trials in outdoor operational settings Partner closely with controls, embedded, and hardware engineers to ensure system-wide coherence Build tooling for visualization, logging, replay, and real-time debugging Contribute to perception strategy and influence the ongoing roadmap for autonomy and intelligence Qualifications 3+ years of professional experience developing ML/CV-based perception systems for robotics, autonomy, or embedded products Demonstrated success deploying vision or ML models into constrained, real-time environments Strong proficiency in Python and C++ for research and embedded development Applied experience with object detection, classification, tracking, and related CV workflows Hands-on background with sensor fusion techniques (EKF/UKF or similar) using camera + IMU data Exposure to acoustic or audio-driven sensing methods Familiarity with embedded inference platforms such as NVIDIA Jetson, Coral, or comparable systems Ability to bring up hardware, debug drivers, and tune systems directly on embedded devices Preferred Experience Experience working on unmanned systems, robotics autonomy, counter-UAS, or advanced defense hardware Understanding of model compression techniques (quantization, pruning, TensorRT optimization) Knowledge of acoustic localization, filtering, and triangulation methods Prior contributions within early-stage or fast-iteration engineering teams Background with real-time, safety-critical, or mission-driven embedded systems Why Join Us Opportunity to serve as a key technical leader and founding contributor Build real autonomous systems that move from concepts to field demonstrations quickly High-trust engineering environment with fast decision cycles Meaningful influence on technical direction, product strategy, and culture Work on technology that directly contributes to protecting people and infrastructure Competitive equity offering Strong PTO and flexible working environment Relocation support for candidates moving to Austin Long-term growth and leadership opportunities as the company expands Compensation Details $120,000 - $210,000 #LI-AV

Summary: · Metrologist leads the area of dimensional conformance in the metrology lab. Responsible for maintaining calibration of all company holding fixtures, check fixtures and quality gages. Will make all final decisions with set-up and verification of dimensional layouts and capability studies, if unclear direction is given from the customer or blueprint. Essential Functions: · Include the following. Other duties may be assigned. · Verify hold log assure product flow in and out of hold. · Submits annual validation parts and requests · Capability studies and analysis. · Manage QAS Equipment (Gage/Fixture) calibration and maintenance. · Maintain all lab records · Operate CMM and learn programming of CMM · Confirm a capable process and get Quality Manager to remove from control plan. · Verify Service. · Update Hold / Quarantine area including Parts+ System. · Lead inspectors in capability studies. · Review Quality Books. · Assure the lab area is 5S compliant. · Receiving Inspection Certs / verification of product. · It is the responsibility of all employees to take corrective action for all non-conforming items identified by the employee. · Perform other duties as required for the safe, efficient operation of the plant and its employees. · Supervisory Responsibilities- This position does not supervise any employee Qualifications: · To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. · Blueprint interpretation. · GD&T interpretation. · Statistical techniques. · Basic gage and fixture concept. · Good oral and written communication skills. · PC familiarity. · Good interpersonal skills. · Time management skills. · Education and/or Experience- Associate's degree (A. A.) or equivalent from two-year college or technical school; or one year to three years related experience and/or training; or equivalent combination of education and experience. Physical Requirements: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. · While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel; reach with hands and arms; and talk or hear. The employee frequently is required to stand, walk, and sit. The employee must occasionally lift and/or move up to twenty-five (25) pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus.

** At Western Digital, our vision is to power global innovation and push the boundaries of technology to make what you thought was once impossible, possible. At our core, Western Digital is a company of problem solvers. People achieve extraordinary things given the right technology. For decades, we've been doing just that. Our technology helped people put a man on the moon. We are a key partner to some of the largest and highest growth organizations in the world. From energizing the most competitive gaming platforms, to enabling systems to make cities safer and cars smarter and more connected, to powering the data centers behind many of the world's biggest companies and public cloud, Western Digital is fueling a brighter, smarter future. Binge-watch any shows, use social media or shop online lately? You'll find Western Digital supporting the storage infrastructure behind many of these platforms. And, that flash memory card that captures and preserves your most precious moments? That's us, too. We offer an expansive portfolio of technologies, storage devices and platforms for business and consumers alike. Our data-centric solutions are comprised of the Western Digital , G-Technology, SanDisk and WD brands. Today's exceptional challenges require your unique skills. It's You & Western Digital. Together, we're the next BIG thing in data. **Job Description** ESSENTIAL DUTIES AND RESPONSIBILITIES: + Using sound test engineering principles, knowledge of the product and technology to ensure the product meets functional and customer requirements and is ready to ship on schedule + Owns product validation regarding test plan definition, test plan execution, and primary lead in failure analysis + Primary lead in performing performance characterization of product and tracking down any observed anomalies + Contributes to overall test schedule development + Writes the test plans for new product features, generates test matrices, test reports, and other relevant test documentation that is required for flawless program execution + Defines new tests based on customer feedback and defect fixes + Executes existing/regression test cases for the project during the entire product development cycle + Works closely with the other system test, hardware, ASIC and firmware engineers to improve test methodology and develop new tests and new strategies + Configures customer hardware and software systems; troubleshoot problems to get to root cause + Maintains customer and test equipment to current revision + Comfortable instrumenting changes in Linux Kernel + Be an expert Guide for Automation, Script reviews + Experience with the below: Secure Boot · Secure Firmware Download · Secure Debug · Authentication · Attestation · Data in Flight Encryption o IPsec, in Transport and Tunnel mode o Transport Layer Security (TLS) 1.3 o Asymmetric (Public-Private key) Cryptography o Symmetric Cryptography (i.e. AES-GCM) o Quantum-safe (Post-Quantum) Cryptography Bonus for: · Secure development process · Penetration testing experience **Qualifications** **MUST POSSES THESE REQUIREMENTS** + **Bachelors degree or Masters degree in Engineering, Computer Science, other related discipline.** + **A minimum of 8-10 years of experience in Ethernet Storage/Networking** + **Networking protocols, Storage NVME** + **Programming experience utilizing Python, or other scripting languages** **DESIRED QUALIFICATIONS** + Secure Boot + Secure Firmware Download + Secure Debug + Authentication + Attestation + Data in Flight Encryption + IPsec, in Transport and Tunnel mode + Transport Layer Security (TLS) 1.3 + Asymmetric (Public-Private key) Cryptography **Additional Information** Western Digital is committed to providing equal opportunities to all applicants and employees and will not discriminate based on their race, color, ancestry, religion (including religious dress and grooming standards), sex (including pregnancy, childbirth or related medical conditions, breastfeeding or related medical conditions), gender (including a person's gender identity, gender expression, and gender-related appearance and behavior, whether or not stereotypically associated with the person's assigned sex at birth), age, national origin, sexual orientation, medical condition, marital status (including domestic partnership status), physical disability, mental disability, medical condition, genetic information, protected medical and family care leave, Civil Air Patrol status, military and veteran status, or other legally protected characteristics. We also prohibit harassment of any individual on any of the characteristics listed above. Our non-discrimination policy applies to all aspects of employment. We comply with the laws and regulations set forth in the Equal Employment Opportunity is the Law (************************************************************************************* poster. Western Digital thrives on the power and potential of diversity. As a global company, we believe the most effective way to embrace the diversity of our customers and communities is to mirror it from within. We believe the fusion of various perspectives results in the best outcomes for our employees, our company, our customers, and the world around us. We are committed to an inclusive environment where every individual can thrive through a sense of belonging, respect and contribution. Western Digital is committed to offering opportunities to applicants with disabilities and ensuring all candidates can successfully navigate our careers website and our hiring process. Please contact us at jobs.accommodations@wdc.com to advise us of your accommodation request. In your email, please include a description of the specific accommodation you are requesting as well as the job title and requisition number of the position for which you are applying. \#LI-TD1 **Compensation & Benefits Details** + An employee's pay position within the salary range may be based on several factors including but not limited to (1) relevant education; qualifications; certifications; and experience; (2) skills, ability, knowledge of the job; (3) performance, contribution and results; (4) geographic location; (5) shift; (6) internal and external equity; and (7) business and organizational needs. + The salary range is what we believe to be the range of possible compensation for this role at the time of this posting. We may ultimately pay more or less than the posted range and this range is only applicable for jobs to be performed in California, Colorado, New York or remote jobs that can be performed in California, Colorado and New York. This range may be modified in the future. + If your position is non-exempt, you are eligible for overtime pay pursuant to company policy and applicable laws. You may also be eligible for shift differential pay, depending on the shift to which you are assigned. + You will be eligible to be considered for bonuses under **either** Western Digital's Short Term Incentive Plan ("STI Plan") or the Sales Incentive Plan ("SIP") which provides incentive awards based on Company and individual performance, depending on your role and your performance. You may be eligible to participate in our annual Long-Term Incentive (LTI) program, which consists of restricted stock units (RSUs) or cash equivalents, pursuant to the terms of the LTI plan. Please note that not all roles are eligible to participate in the LTI program, and not all roles are eligible for equity under the LTI plan. RSU awards are also available to eligible new hires, subject to Western Digital's Standard Terms and Conditions for Restricted Stock Unit Awards. + We offer a comprehensive package of benefits including paid vacation time; paid sick leave; medical/dental/vision insurance; life, accident and disability insurance; tax-advantaged flexible spending and health savings accounts; employee assistance program; other voluntary benefit programs such as supplemental life and AD&D, legal plan, pet insurance, critical illness, accident and hospital indemnity; tuition reimbursement; transit; the Applause Program; employee stock purchase plan; and the Western Digital Savings 401(k) Plan. + **Note:** No amount of pay is considered to be wages or compensation until such amount is earned, vested, and determinable. The amount and availability of any bonus, commission, benefits, or any other form of compensation and benefits that are allocable to a particular employee remains in the Company's sole discretion unless and until paid and may be modified at the Company's sole discretion, consistent with the law. **Notice To Candidates:** Please be aware that Western Digital and its subsidiaries will never request payment as a condition for applying for a position or receiving an offer of employment. Should you encounter any such requests, please report it immediately to Western Digital Ethics Helpline (******************************************************************** or email ****************** .

Southeastern Metal Products LLC has been serving customers since 1952 and has established a reputation for high quality work, dependable delivery and first-rate customer service. Acquired in 2006, we are proud to be a Juno Investments LLC portfolio company. We have over 100,000 ft of manufacturing and warehouse space and a skilled dedicated work force prepared to handle your project, large or small, from start to finish or anywhere in-between. We pride ourselves in the ability to use our manufacturing and engineering expertise to manage any type of project ranging from “build to print” to assisting our customers in product design for manufacturability. Through its in-house tool design/manufacturing capabilities, SEMP is able to assist its customers in drastically reducing the time and cost required to launch a new product. SEMP is ISO 9001:2008 certified, assuring you of consistent quality and accurate deliveries. We have the experience, facilities and commitment to customer service to be a valued manufacturing partner. We invite you to inspect our plant, meet our people, and see for yourself. Job Description - Proficient in Nesting in a manufacturing environment. - Set up welder, - Programming skills - Skilled with turn-punch - Order parts from vendors Note : Local candidates only Staffing agencies : pls do not contact Qualifications - Nesting skills: laying out cutting patterns to minimize the raw material waste. - Knowledgeable with manufacturing parts from flat raw material such as sheet metal . - Follow detailed instructions and procedures. - Comply to company safety policies - Comply with Quality System policies and requirements. Additional Information All your information will be kept confidential according to EEO guidelines. Please apply thru Smartrecruiters.com, upload your resume for consideration. Competitive pay, full benefits package. In addition, vacation, paid time off, holidays, outstanding work environment & facility; career growth opportunities!

Who We Are: Nexus Water Group is a leading regulated water and wastewater utility serving more than 1.3 million people across 20 U.S. states and 2 Canadian provinces. "Nexus" means connection. Through the essential water and wastewater services we deliver, we have a very personal connection to the people, businesses, and communities we serve. This is why our operations are locally led and managed. Every day, over 1,300 professionals deliver vital, safe, and reliable service through over 670 water systems and 360 wastewater systems. What We Offer: * Paid Time Off: Starting at 3 weeks annually along with 11 company-paid holidays. * Health and Wellness Benefits: The first day of the month after your start, you'll have access to your health, dental, prescription and vision benefits to help you stay well. * 401(k) Program with Matching Contribution: We offer a 100% match on contributions up to 4% of your salary, plus an additional 3% employer contribution. * Grow With Us: Professional development opportunities through training, professional certifications, and education allowance. * Additional Benefits: Other great benefits include company provided life insurance and Employee Assistance Program just to name a few. Overview: The Construction Inspector is responsible for the monitoring, inspections, and reporting of quality and performance of capital improvement projects. This position reports to Director(s) of Engineering and serves as a primary support role for Project Managers. The position has a heavy focus on water and wastewater infrastructure construction including facilities, water distribution, sewer collection systems, and their respective sub trades. Perform project communication and project coordination, perform public works inspections, ensure quality control of materials and methods, maintain construction records and perform reporting, and manage construction contracts. This position's experience and knowledge of the primary responsibilities will be advanced and the Inspector III will work independently. What You'll Do: * Reads and interprets construction contracts, drawings, specifications and other project related documentation to effectively inspect, observe and report on contractor activities and to verify that the work is compliant; informs contractors and/or applicable managers of any deviations in compliance with contract documents or failure to rectify work. * Maintains accurate, up-to-date and factual daily log describing the activities and the work of the General Construction Contractor and/or their subcontractor, including conversations (phone calls, in person, etc.); prepares and submits related daily reports. * Utilizes and maintains the paper and electronic document control systems. * Maintains project record files; prepares deficiency reports and follows up to ensure correction. * Provides oversight on multiple, simultaneous projects; observes and reports on issues impacting the work or the progress of the work. Coordinates with the contractor on daily and weekly schedule tasks in the field and reports any delayed tasks to the Construction Manager. Advises contractor and reports non-compliant work or materials to the Construction Manager. * Conducts site safety inspections * Conducts site inspections for SWPPP compliance * Reviews, verifies, and recommends the quantities contained in the Contractor's monthly application for payment request and makes recommendations to the Construction Manager regarding payment of monthly application, Partial Substantial Completion, Substantial Completion, and Final Completion requests for payment; ensures timely Contractor submittal and Owner payment. * Attends and participates with the Contractor in all routine meetings and inspections as set forth in the Contract Documents and special meetings when requested; assists in responding to impacts and concerns of construction on the local community. * Assist operations staff on an as-needed basis for new service taps To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. What You'll Bring: Education * A high school diploma or equivalent with five (5) years related experience and/or training; or equivalent combination of education and experience is required. Experience * Experience providing inspections on projects for utilities including wastewater treatment plants, sanitary sewer lift stations, water treatment plants, booster pump stations, water storage tanks, and underground piping systems * Basic familiarity with a broad spectrum of materials, methods, and processes used in the construction of utility projects. * Knowledge of Microsoft Office Suite including Outlook, Excel, Word, and Project. Familiarity with utilizing Microsoft SharePoint and/or AutoDesk Construction Cloud is a plus. License * Valid Texas Driver's License with insurable driving record is required. Preferences * An ACI and/or ICC certification is preferred

 Join UCT and be part of the fastest-growing sector in the world! We indirectly touch every semiconductor chip that goes into every smartphone, smart car, and device that uses artificial intelligence. This is a critical time for the semiconductor industry and for UCT - as technology evolves, we evolve with it. UCT is a diverse workplace where every talented employee is committed to continuous innovation, challenging the status quo and exceeding customer expectations. If you are a person with a relentless drive to succeed, a strong focus on quality with a passion for success - join us today!  UCT is looking for a talented Engineer I, IT Supp to join us in Austin, TX!   The Engineer I, IT User Supp has the responsibility of overseeing all aspects of Information Technology Support Services, which includes managing and supporting desktops, laptops, communication hardware/software, and office systems. Essential Duties and Responsibilities: Respond to requests for IT assistance via phone, internal ticketing system, and email Excellent verbal and written communication Perform on/off boarding of Active Directory accounts via PS scripts. Identify and escalate situations requiring urgent attention. Diagnose and resolve hardware and software issues Assist with user training. Activate and configure iOS devices. Participate in the on-call rotation to support other sites Track and route problems, requests, and document resolutions Inventory management of firm hardware, software, and accessories Miscellaneous IT tasks and duties, as required Rolls out hardware and software to ensure optimal deployment of resources Plans, implements, and supports the network and computing infrastructure plan Troubleshoot user-reported software issues and assist in the successful resolution of those issues. Ability to install and repair CAT5/6 cabling and connections Prioritize work and address multiple tasks concurrently Ensure each client you speak to is extremely happy and satisfied, providing the best customer service. Create trouble tickets, receive troubleshooting requests, and create reports. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Knowledge, Skills and Abilities: 3+years of current experience in desktop support on a medium to large-size network. Understanding of Windows 2019 Domain environment, Active Directory, servers, desktop systems, and communications devices using current technologies. Technically adept with experience or interest in supporting customers. Outstanding verbal and written communication skills. Punctual and respectful of others' schedules and meeting deadlines promptly. Demonstrated knowledge of Microsoft Office and desktop products. Demonstrated ability to support networked printers, photocopiers, scanners, and multifunction devices. Demonstrated knowledge of setting up remote access for users. Ability to manage priorities and expectations in a fast-paced environment. Highly organized team player. Ambitious, Goal Driven, and possess a Positive Attitude. Dependable transportation and valid driver's license. Educational/Certification Requirement: Desired Qualifications/Skills: Basic knowledge of VOIP systems. Basic knowledge of physical Ethernet cabling. Basic knowledge of shared storage (NAS/SAN). Basic knowledge of ethernet networks. Bachelor's degree (or equivalent experience) in computer science or related field. Experience Requirement: Work Experience: Physical Demands and Working Conditions: This section is required for compliance with the Americans with Disabilities Act (ADA) Criteria: Work Environment: Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Works in a manufacturing environment. Physical Demands: Ability to kneel, reach, walk, push, pull and grasp. Ability to lift up to 50 lbs. Ability to move arms, hands, and fingers Ability to sit for sustained periods. Required to wear personal protective equipment. Prolonged sitting with some standing and bending intermittently during work hours. Subject to interruptions. Environmental Exposure: Required to wear personal protective equipment where applicable. Subject to frequent interruptions. The ability to talk on the phone and use a computer for extended periods may be required. May involve exposure to moderate noise levels from printers, faxes, computers, etc. Overnight Travel: Work may require out-of-town travel depending upon assignment (training and meeting). Ultra Clean Technology is proud to be an equal-opportunity employer. We are committed to equal employment opportunity regardless of race, color, national or ethnic origin, age, religion, disability, sexual orientation, gender, gender identity and expression, marital status, and any other characteristic protected under laws and regulations. UCT offers an excellent benefits package to all full-time employees, which includes medical, dental, vision, 401(k), and paid time off.

Quantiq specializes in high frequency derivatives trading in the largest markets worldwide. Our approach is rigorous and pragmatic, driven by technological expertise and analytics informed by real-world experience. We value employees who love to learn and have the tenacity, curiosity and willpower to contribute to our continuing success. We are a small but passionate team, dedicated to enhancing and refining our tried and true methods as we commit to our ongoing growth and performance. Quantiq runs considerable "in-house" infrastructure (IPA realm) consisting of 50-100 computers ranging from high performance servers and varied datacenter hardware (switches, FPGAs, fiber optic cabling), to desktop computers with dedicated GPUs and an array of monitors and peripherals across offices. We control the majority of the stack and create, maintain, update, and monitor a variety of systems to keep the companys trading running smoothly. Our hardware infrastructure operates entirely on Fedora Linux and incorporates significant first- and third-party software requiring occasional maintenance. This complete infrastructure has high uptime requirements to support our critical trading operations. Job Description: As an IT Operations Engineer, you will be responsible for managing and maintaining the core IT infrastructure, ensuring that systems run smoothly and are consistently optimized. This role requires a mix of technical skills and the ability to troubleshoot a range of hardware, network, and software issues. You will work closely with both the Technical and Operations teams to provide support, implement solutions, and contribute to the overall success of our IT operations. If the following resonates with you, we would love to welcome you to our team. Job Responsibilities: Monitor, maintain, and optimize IT infrastructure, including servers, networks, storage, and databases Oversee the full system lifecycle, including provisioning, installation, configuration, asset management, monitoring, maintenance, and decommissioning of various systems Work with vendors to procure and deploy new hardware Respond to issues and requests from the Operations and Technical teams Qualifications: 5+ years of experience in IT operations, systems engineering, or a related role Strong knowledge of networking protocols and tools (TCP/IP, DNS, DHCP, VPN) Familiarity with scripting and automation tools (e.g., Bash, PowerShell, Python) Exceptional capability debugging and solving complex issues related to both hardware, low level software, and networking -Knowledge of network architecture Excellent organizational skills and attention to detail in fast-paced environment Strong written and verbal communication skills Ability to respond to occasional off-hour emergencies Please Apply If: You excel at diagnosing and resolving complex technical issues across hardware, software, and network layers You enjoy learning and working with new technologies and platforms You have experience with command-line tools for troubleshooting and system management (e.g., Bash, PowerShell) You feel at home scripting and automating tasks You understand and can configure networking protocols (TCP/IP, DNS, DHCP) Youre skilled in creating backup solutions and disaster recovery plans, and you regularly test recovery processes to ensure reliability Application Requirement: Write a program in C++ that takes in a file as input and reverses every line and puts it in a different file. Try to do this with as little memory footprint as possible and as fast as possible. Attach the file in the "Cover Letter" section.

Job DescriptionDescription: Under relatively minimal supervision, repair, calibrate and maintain all types of basic biomedical technologies, devices, instruments, and systems. Inspect, install and perform preventive maintenance services on general medical equipment. ESSENTIALS DUTIES AND RESPONSIBILITIES: Repair, install, maintain, calibrate, and inspect a diverse range of therapeutic and diagnostic biomedical instrumentation and equipment in a timely manner to minimize downtime. Perform preventive maintenance inspections and electrical safety testing on equipment, devices, and systems on a routine basis. Diagnose and correct system and equipment malfunctions. Maintain a high standard of customer service. Control costs within budgetary guidelines. Professional conduct at all times. Complete all required paperwork on new equipment inspections and equipment repairs and failures accurately and on time. Properly maintain company-issued equipment. Maintain appropriate communications within region/division and throughout the company with vendors, manufacturers, and customers. Ensure compliance with company policies and procedures as well as government regulations. Develops and presents solution options to supervisors on critical issues. Provide technical assistance and instruction on equipment operation and maintenance to personnel. Assume additional responsibility as directed by the supervisor. Maintain expected productivity according to productivity and billing requirements. Requirements: Experience & Educational Requirements: 3+ years Biomedical Technician experience CBET certification preferred Associate Degree in Biomedical Technology or related field PHYSICAL DEMANDS Must be able follow the physical activities listed below. Amount of Time Stand: Over 2/3 Walk: Over 2/3 Sit:1/3 to 2/3 Use hands to finger, handle, or feel : Over 2/3 Reach with hands and arms : Over 2/3 Climb or balance: Over 2/3 Stoop, kneel, crouch, or crawl: Over 2/3 Talk or hear: Over 2/3 Taste or smell: 1/3 to 2/3 Must be able to lift following weight or exert force. Amount of Time Up to 10 pounds: Over 2/3 Up to 25 pounds: Over 2/3

Saronic Technologies is a leader in revolutionizing autonomy at sea, dedicated to developing state-of-the-art solutions that enhance maritime operations through autonomous and intelligent platforms. We're seeking an Electromechanical Technician to ensure the operational readiness and reliability of our autonomous surface vessels for the DoD. You will be responsible for diagnosing, repairing, and maintaining ASVs and remain instrumental in sustaining mission-critical assets and ongoing operations. Responsibilities * Conduct comprehensive diagnostic assessments of ASVs and their components to identify issues and malfunctions * Perform timely and efficient repairs, replacements, and adjustments to restore ASVs to optimal functionality * Collaborate closely with engineering and technical teams to troubleshoot complex problems and implement effective solutions * Conduct thorough testing and quality assurance procedures to validate repairs and ensure compliance with performance standards * Document all repair activities, including findings, procedures, and outcomes, adhering to company protocols and industry regulations * Maintain an organized inventory of spare parts, tools, and equipment necessary for depot repair operations * Assist in the development and optimization of repair procedures and protocols to enhance efficiency and effectiveness * Provide technical support and training to field technicians and end-users as needed Qualifications * Associate degree or technical certification in electronics, mechanical engineering, or a related field. Bachelor's degree preferred * Experience in depot-level repair and maintenance of complex electronic and mechanical systems, preferably in the maritime or defense industry * Proficiency in troubleshooting, diagnosing, and repairing electrical, electronic, and mechanical components and systems * Familiarity with autonomous systems, marine navigation, and control systems is preferred * Strong analytical and problem-solving skills with attention to detail * Experience working with the DoD or government contracts is a plus Benefits * Medical Insurance: Comprehensive health insurance plans covering a range of services * Saronic pays 100% of the premium for employees and 80% for dependents * Dental and Vision Insurance: Coverage for routine dental check-ups, orthodontics, and vision care * Saronic pays 99% of the premium for employees and 80% for dependents * Time Off: Generous PTO and Holidays * Parental Leave: Paid maternity and paternity leave to support new parents * Competitive Salary: Industry-standard salaries with opportunities for performance-based bonuses * Retirement Plan: 401(k) plan * Stock Options: Equity options to give employees a stake in the company's success * Life and Disability Insurance: Basic life insurance and short- and long-term disability coverage * Additional Perks: Free lunch benefit and unlimited free drinks and snacks in the office Physical Demands * Ability to perform physically demanding work for extended periods of time, up to 12 hours/day * Frequently and repetitively, lift, push and carry up to 20 lbs. * The ability to carry 20 lbs. up and down stairs * Ability to work outside for an extended period of time * Frequently and repetitively, bend, lift and reach to install vehicle parts of varying size and weight overhead, accurately and in allotted timeframes * Ability to stand and walk for up to 12 hours/day, including over varied and uneven terrain * Stoop, lay, bend, reach, squat, kneel, crouch, twist and crawl for extended periods of time, including up to 12 hours/day * Climb and maintain balance on ladders, platforms, or other high structures * Ability to find issues in a work process and be alert to safety signals using sight, touch, and hearing * Demonstrated ability to handle and manipulate tooling and mechanically fasten bolts within required cycle time * Exposures to hazardous materials and ability to follow waste handling/disposal procedures * Wearing Personal Protective Equipment, including but not limited to safety glasses, safety shoes, hearing protection, gloves and adhering to prescribed safety rules and guidelines This role requires access to export-controlled information or items that require "U.S. Person" status. As defined by U.S. law, individuals who are any one of the following are considered to be a "U.S. Person": (1) U.S. citizens, (2) legal permanent residents (a.k.a. green card holders), and (3) certain protected classes of asylees and refugees, as defined in 8 U.S.C. 1324b(a)(3). Saronic does not discriminate on the basis of race, sex, color, religion, age, national origin, marital status, disability, veteran status, genetic information, sexual orientation, gender identity or any other reason prohibited by law in provision of employment opportunities and benefits.

The application window is expected to close on: December 18, 2025. NOTE: Job posting may be removed earlier if the position is filled or if a sufficient number of applications are received. Note: This role is a **Remote, US** with preference given to candidates located in the **San Jose, CA.** **Meet the Team** Join the core Hypershield Data Plane team within Cisco's Security Business Group-an industry-first effort redefining how modern distributed security is built. We are engineering the data path for a highly available, AI-designed security fabric that protects applications across public clouds, private data centers, and physical environments. This team is building segmented firewalling directly in the data plane-a first-of-its-kind innovation not available elsewhere in the industry. Engineers on this team get end-to-end ownership of packet processing systems, deep exposure to DPUs (AMD), NPUs, and P4, and the opportunity to shape foundational architecture in a fast-paced, high-visibility environment. If you want to work on the core of the data path, build something new, and learn deeply from day one-this is the place. **Your Impact** In this role, you will design, build, and optimize the data plane for Cisco Hypershield using C++, P4, and hardware offload technologies such as DPUs and NPUs. You'll work hands-on with AMD DPU specifications, packet processing pipelines, and performance-critical components from day one. Success in this role means operating in a fast-paced model-quickly absorbing the architecture, contributing to data-plane development immediately, and delivering reliable, high-performance code with minimal hand-holding. You will: + Design and implement data-plane features using P4, microcode, and C++ across DPU/NPU architectures. + Bring up hardware platforms, integrate SDKs, and debug low-level packet-processing behavior. + Work from AMD technical specifications to define and build performant pipelines. + Collaborate closely with internal teams (control plane, management plane, platform) to deliver end-to-end datapath functionality. + Drive system-level architecture discussions and influence design choices for high-throughput and low-latency packet processing. **Minimum Qualifications** + Bachelor's degree in Computer Science, Electrical Engineering, or related field. + 7+ years of experience in packet processing (e.g., DPDK, TCP reassembly, high-throughput pipelines). + Programming experience in C/C++ and experience with P4 or microcode/U-code development. + Experience bringing up platforms or ASICs in Linux-based environments. + Hands-on experience building or leveraging hardware acceleration with DPUs or NPUs. **Preferred Qualifications** + Experience working with AMD DPUs, Broadcom, Marvell, or Intel data-path hardware. + Deep understanding of P4 compiler behavior, pipeline stages, and programmable switch architecture. + Experience with performance analysis, tuning, and optimization of high-throughput systems. + Prior background in designing test harnesses, working with third-party SDKs, or hardware debug. + Experience owning features end-to-end in a distributed or high-availability networking product. **Why Cisco?** At Cisco, we're revolutionizing how data and infrastructure connect and protect organizations in the AI era - and beyond. We've been innovating fearlessly for 40 years to create solutions that power how humans and technology work together across the physical and digital worlds. These solutions provide customers with unparalleled security, visibility, and insights across the entire digital footprint. Fueled by the depth and breadth of our technology, we experiment and create meaningful solutions. Add to that our worldwide network of doers and experts, and you'll see that the opportunities to grow and build are limitless. We work as a team, collaborating with empathy to make really big things happen on a global scale. Because our solutions are everywhere, our impact is everywhere. We are Cisco, and our power starts with you. **Message to applicants applying to work in the U.S. and/or Canada:** The starting salary range posted for this position is $183,800.00 to $263,600.00 and reflects the projected salary range for new hires in this position in U.S. and/or Canada locations, not including incentive compensation*, equity, or benefits. Individual pay is determined by the candidate's hiring location, market conditions, job-related skillset, experience, qualifications, education, certifications, and/or training. The full salary range for certain locations is listed below. For locations not listed below, the recruiter can share more details about compensation for the role in your location during the hiring process. U.S. employees are offered benefits, subject to Cisco's plan eligibility rules, which include medical, dental and vision insurance, a 401(k) plan with a Cisco matching contribution, paid parental leave, short and long-term disability coverage, and basic life insurance. Please see the Cisco careers site to discover more benefits and perks. Employees may be eligible to receive grants of Cisco restricted stock units, which vest following continued employment with Cisco for defined periods of time. U.S. employees are eligible for paid time away as described below, subject to Cisco's policies: + 10 paid holidays per full calendar year, plus 1 floating holiday for non-exempt employees + 1 paid day off for employee's birthday, paid year-end holiday shutdown, and 4 paid days off for personal wellness determined by Cisco + Non-exempt employees** receive 16 days of paid vacation time per full calendar year, accrued at rate of 4.92 hours per pay period for full-time employees + Exempt employees participate in Cisco's flexible vacation time off program, which has no defined limit on how much vacation time eligible employees may use (subject to availability and some business limitations) + 80 hours of sick time off provided on hire date and each January 1st thereafter, and up to 80 hours of unused sick time carried forward from one calendar year to the next + Additional paid time away may be requested to deal with critical or emergency issues for family members + Optional 10 paid days per full calendar year to volunteer For non-sales roles, employees are also eligible to earn annual bonuses subject to Cisco's policies. Employees on sales plans earn performance-based incentive pay on top of their base salary, which is split between quota and non-quota components, subject to the applicable Cisco plan. For quota-based incentive pay, Cisco typically pays as follows: + .75% of incentive target for each 1% of revenue attainment up to 50% of quota; + 1.5% of incentive target for each 1% of attainment between 50% and 75%; + 1% of incentive target for each 1% of attainment between 75% and 100%; and + Once performance exceeds 100% attainment, incentive rates are at or above 1% for each 1% of attainment with no cap on incentive compensation. For non-quota-based sales performance elements such as strategic sales objectives, Cisco may pay 0% up to 125% of target. Cisco sales plans do not have a minimum threshold of performance for sales incentive compensation to be paid. The applicable full salary ranges for this position, by specific state, are listed below: New York City Metro Area: $183,800.00 - $303,100.00 Non-Metro New York state & Washington state: $163,600.00 - $269,800.00 * For quota-based sales roles on Cisco's sales plan, the ranges provided in this posting include base pay and sales target incentive compensation combined. ** Employees in Illinois, whether exempt or non-exempt, will participate in a unique time off program to meet local requirements. Cisco is an Affirmative Action and Equal Opportunity Employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, national origin, genetic information, age, disability, veteran status, or any other legally protected basis. Cisco will consider for employment, on a case by case basis, qualified applicants with arrest and conviction records.

PLEASE WHITELIST ALL EMAILS FROM NO-REPLY@APPLICANTEMAIL.COM AS STATUS UPDATES FOR POSITIONS ARE SENT DIRECTLY FROM THIS EMAIL. DEFINITION / GENERAL PURPOSE: Performs a variety of tasks, semi-skilled and skilled technical work in the operation, maintenance, and repair of the SCADA system. Occasionally works on other water system components such as control valves, check valves, air release valves, motors, and pumps along with other various equipment. Reports water quality test results daily; including work-orders, water quality complaint reports, SCADA Data logs, and as designated by the Superintendent. SUPERVISION RECEIVED AND EXERCISED: Works Under the general supervision of the SCADA Supervisor. ESSENTIAL DUTIES AND RESPONSIBILITIES: Assists in recording all pertinent data required by State, City, and department. Monitors and records data from SCADA system. Monitors chlorine residual within the water system. Performs accuracy tests on multiple Analyzers, Transducers, and Laboratory Test Kits on a monthly basis. Performs operational checks and maintains all pump/storage facilities within the guidelines of TCEQ, City and departmental rules and regulations. Climbs and inspects water storage tanks when required. Records weight, regulates, and changes chlorine bottles when required. Performs chlorinator, pump, and motor maintenance and repair. Responds to customer service complaints. Performs bacteriological water sampling (upon licensing, when required). Repair and maintain control valves, check-valves, and air releases. Troubleshoots minor electrical problems when required. Perform minor repairs to electrical controls, chart machines, timers, phase protectors, and SCADA components when required. Operate and maintain vehicles. Responds to emergency calls periodically (on-call 24 hours for 7 days). Performs other essential duties as required to achieve successful operations of the department. Subject to be called to assist an employee on standby duty. Contribute to team effort by performing other related duties as assigned. Regular and timely attendance is an essential job function. PERIPHERAL DUTIES: Serves as a member of various employee committees, as assigned. Assists in the training and supervising of all employees, contractors, and volunteers. Other Duties as assigned. DESIRED MINIMUM QUALIFICATIONS: High school diploma or GED required. Valid Texas Driver's License rated Class "C" or higher with insurable record. Minimum Experience: None, will train upon employment. Desired Experience: Water distribution operations or operations in a relatable field. SPECIAL REQUIREMENTS: Must attend the required education and training to maintain required certifications. Obtain Class "D" Water Distribution license within eighteen (18) months from date of employment. Obtain Class "C" Water Distribution license within three (3) years from date of employment. KNOWLEDGE, SKILLS AND ABILITIES: Knowledge of equipment, materials, methods and procedures used in water distribution operations; Knowledge of safety procedures and practices related to excavation, confined space entry, trenching, dangerous gases, and other water distribution operations; Ability to evaluate and perform the technical operations of the SCADA system; Ability to perform and diagnose water quality control testing; Ability to work, drive and operate a variety of vehicles and equipment safely and effectively; Ability to obtain/maintain licenses as required by Federal and State laws; Ability to communicate effectively verbally and in writing; Ability to read and understand technical manuals and map; Ability to establish and maintain effective working relationships with fellow employees and other departments, and the public; Ability to monitor, read, interprets various diagrams, devices; chart gauges, and correctly interpret and react to those interpretations; Ability to learn the characteristics of individual pump stations, and water storage facilities. SELECTION GUIDELINES: Formal application, rating of education and experience; oral interview, reference and criminal background checks, and drug screens are required. Job related tests may also be required. TOOLS AND EQUIPMENT USED: Various motorized vehicles including pickup truck (w/trailer), medium sized equipment, various power tools, tampers/compactors, lawn maintenance equipment/tools, cut-off saws, chain saws, jackhammers, pneumatic valve machines, and tapping machines. Various common hand tools, shovels, wrenches, safety equipment such as SCBA's and harnesses, and/or any other tool or equipment inherent to the job. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to lift, carry, and position objects weighting up to 75 pounds in weight. The use of hands and fingers to handle, and/or feel of objects. The employee is occasionally required to sit, stand and/or walk. The employee must occasionally lift and/or move up to 100 pounds, and have good coordination in the manipulation of light and heavy equipment. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is occasionally exposed to moving mechanical parts; fumes or airborne particles and outside weather conditions. The noise level in the work environment is usually loud. The employee in this position will be required to remain on-call due to the any nature of the job. The duties listed above are intended only as illustrations of the various types of work that may be performed. The omission of specific statements of duties does not exclude them from the position if the work is similar, related or a logical assignment to the position. No one will perform the duties of a higher position without prior authorization from an individual authorized to approve. The job description does not constitute an employment agreement between the employer and employee and is subject to change by the employer as the needs of the employer and requirements of the job change. Job Posted by ApplicantPro

Under general supervision, the SCADA Technician performs a variety of technical tasks in support of the SCADA system to include calibrating equipment, performing overall maintenance and correcting problems with equipment; providing technical support; serving as first responder to outages and equipment failures; coordinating work; and documenting work activities. Posted pay range is the starting salary. Pay rate offered is based on experience. Examples of Duties * Troubleshoot SCADA field equipment demonstrating knowledge on how to operate HMIs and using database historians to identify faults. * Repairs and maintains SCADA by diagnosing problems using schematic drawings, monitoring software, and digital test equipment; repairs, replaces and reprograms by diagnosis; performs routine maintenance on SCADA system components; performs visual and machine aided inspections, installs and inspects weatherization. * Builds SCADA by assembling parts to form a working product; tests assembly prior to deployment; deploys, assembles, and integrates field and human machine interface. * Maintains UPS equipment by diagnosing software to measure uninterruptable power supply capacity; replaces batteries if capacity is low; replaces UPS if unit fails. * Calibrates instruments by using test equipment; performs periodic calibrations to verify monitoring instruments are within limits; directs others to perform calibrations. Experience and Training * Associate degree, diploma, or equivalent from a college, technical, business, vocational, or correspondence school. Additional work experience may substitute for education on a year-for-year basis. * At least one (1) year of experience as a SCADA technician or in a similar position. * Must have experience in process meters for generating analog signals and troubleshooting low voltage digital signals. Certificates and Licenses Required * Valid Class C driver's license. * Obtain Wastewater Operator C License from Texas Commission on Environmental Quality within two (2) years of employment. * Required to obtain a Wastewater Operator D License within 6 months after hire.

Full-time Description Work on state-of-the-art oven-controlled crystal oscillators and RF components. Support production testing using automated test equipment and various types of test equipment including multimeters, frequency counters, and spectrum analyzers. Broadly responsible for testing, troubleshooting, repairing and modifying electronic circuits according to engineering instructions and customer specifications. Document and certify testing to military standards using approved acceptance test procedures. Requirements ESSENTIAL FUNCTIONS Perform testing and modifications on product using approved procedures. Troubleshoot circuits to component level. Generate test reports. Perform regularly scheduled preventive maintenance on electronic equipment. Ensure product is moved through testing sequences in a timely manner to meet schedule demands. OTHER DUTIES AND RESPONSIBILITIES Performs other duties as assigned. QUALIFICATIONS FOR THE JOB Education: High School Diploma. Technical Degree in relevant field preferred. Experience: 2-5 years' experience in a manufacturing environment. Other: Must have strong written and verbal communication skills. Ability to work independently and as part of a team. Must be detail-oriented and possess knowledge of manufacturing procedures and practices. Working knowledge of basic electronic theory. KEY COMPETENCIES Organizational Skills Communication Proficiency Customer/Client Focus Time Management Collaboration Skills PHYSICAL REQUIREMENTS Ability to perform shop floor / production related activities. Sit and/or stand at workstation for extended periods of time. Lift and carry up to 35 pounds. EEO/VETS/W/DIS

Join UCT and be part of the fastest-growing sector in the world! We indirectly touch every semiconductor chip that goes into every smartphone, smart car, and device that uses artificial intelligence. This is a critical time for the semiconductor industry and for UCT - as technology evolves, we evolve with it. UCT is a diverse workplace where every talented employee is committed to continuous innovation, challenging the status quo, and exceeding customer expectations. If you are a person with a relentless drive to succeed, a strong focus on quality, and a passion for success, join us today! UCT is looking for a talented Engineering Technician I to join us in Austin, TX! The Engineering Technician is responsible for supporting either the Technology Engineering or Manufacturing Engineering departments. Responsible for assisting with assembly, diagnostics, and testing of complex electro-mechanical sub-systems and systems. If under Technology Engineering, responsible for design, documentation, build, and prototyping of mold and heater assembly tooling and fixturing. Works from verbal instructions and preliminary documentation to achieve results. Extended duties include developing knowledge and understanding of engineering practices and procedures, and obtaining capabilities in design using CAD software. Essential Duties and Responsibilities: Supports Technology/Manufacturing Engineering activities such as design, test, diagnostics, and modification of prototype systems. Works from schematics, block diagrams, TC maps, and written and verbal instructions to perform testing and troubleshooting functions. Performs testing using traditional engineering methods; designs experiments and collates data for review. Implements GMP (Good Manufacturing Practices) within assembly methods. Provides written content and streamlines manufacturing methods, work instructions, and training materials. Participates in design reviews with engineering staff. Provide clear thoughts & inputs. Extended duties include: Generates accurate/complete/clear manufacturing drawings of products using SolidWorks and Pro-Engineer. Develops CAD models of parts and assemblies from sketches and mark-ups. Understands system design from concept through detailing and release for production. Understands material, process, and other pertinent specifications needed for the design, drafting & manufacturing of mechanical components. Creates assembly drawings and Bills of Material from assembly models. Prepares layouts/models based on design specifications and creates detailed drawings of parts based on the layout/model. Designs to cost goals and design for manufacturability and testability. Performs other duties as required. Other Duties Please note that this job description is not intended to be a comprehensive listing of all activities, duties, or responsibilities required of the employee in this role. Duties, responsibilities, and activities may change at any time with or without notice. Knowledge, Skills, and Abilities: Basic knowledge of component and system design utilizing SolidWorks Inventor, dependent on-site needs. Knowledge of mechanisms. Basic knowledge of drawing standards, formatting, and dimensioning included basic GD&T. Show initiative and a sense of ownership by learning to be self-sufficient at tasks, but quick to ask questions when uncertain. Demonstrates a serious commitment to accuracy and quality while meeting goals and deadlines. Presents a professional, positive image that reflects well on the organization. Strong oral and written communication skills. Educational/Certification Requirement: High School Diploma or equivalent required; actively pursuing college courses for an engineering degree is given high consideration. Experience Requirement: Work Experience: 5-7 years of electro-mechanical technician experience within a manufacturing environment required. 3-D CAD systems experience preferred. Work Environment: Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Work is performed primarily in a standard office environment. Physical Demands: Ability to climb, stoop, kneel, crouch, reach, walk, push, pull, and grasp. Ability to lift up to 25 lbs. Ability to lift over 25 lbs. with assistance. Ability to move arms, hands, and fingers. Required to have visual acuity to perform assigned tasks Environmental Exposure: Ability to sit or stand for sustained periods of time. Work is a manufacturing, office, and/or cleanroom environment. Subject to hazards including electrical current, moving mechanical parts, and exposure to chemicals. Subject to frequent interruptions. Required to wear personal protective equipment where applicable. Ultra Clean Technology is proud to be an equal opportunity employer. We are committed to equal employment opportunity regardless of race, color, national or ethnic origin, age, religion, disability, sexual orientation, gender, gender identity and expression, marital status, and any other characteristic protected under laws and regulations. UCT offers an excellent benefits package to all full-time employees, which includes medical, dental, vision, 401(k), and paid time off.

Job DescriptionSaronic Technologies is a leader in revolutionizing autonomy at sea, dedicated to developing state-of-the-art solutions that enhance maritime operations through autonomous and intelligent platforms. Job OverviewWe're seeking an Electromechanical Technician to ensure the operational readiness and reliability of our autonomous surface vessels for the DoD. You will be responsible for diagnosing, repairing, and maintaining ASVs and remain instrumental in sustaining mission-critical assets and ongoing operations.Responsibilities Conduct comprehensive diagnostic assessments of ASVs and their components to identify issues and malfunctions Perform timely and efficient repairs, replacements, and adjustments to restore ASVs to optimal functionality Collaborate closely with engineering and technical teams to troubleshoot complex problems and implement effective solutions Conduct thorough testing and quality assurance procedures to validate repairs and ensure compliance with performance standards Document all repair activities, including findings, procedures, and outcomes, adhering to company protocols and industry regulations Maintain an organized inventory of spare parts, tools, and equipment necessary for depot repair operations Assist in the development and optimization of repair procedures and protocols to enhance efficiency and effectiveness Provide technical support and training to field technicians and end-users as needed Qualifications Associate degree or technical certification in electronics, mechanical engineering, or a related field. Bachelor's degree preferred Experience in depot-level repair and maintenance of complex electronic and mechanical systems, preferably in the maritime or defense industry Proficiency in troubleshooting, diagnosing, and repairing electrical, electronic, and mechanical components and systems Familiarity with autonomous systems, marine navigation, and control systems is preferred Strong analytical and problem-solving skills with attention to detail Experience working with the DoD or government contracts is a plus Benefits Medical Insurance: Comprehensive health insurance plans covering a range of services Saronic pays 100% of the premium for employees and 80% for dependents Dental and Vision Insurance: Coverage for routine dental check-ups, orthodontics, and vision care Saronic pays 99% of the premium for employees and 80% for dependents Time Off: Generous PTO and Holidays Parental Leave: Paid maternity and paternity leave to support new parents Competitive Salary: Industry-standard salaries with opportunities for performance-based bonuses Retirement Plan: 401(k) plan Stock Options: Equity options to give employees a stake in the company's success Life and Disability Insurance: Basic life insurance and short- and long-term disability coverage Additional Perks: Free lunch benefit and unlimited free drinks and snacks in the office Physical Demands Ability to perform physically demanding work for extended periods of time, up to 12 hours/day Frequently and repetitively, lift, push and carry up to 20 lbs. The ability to carry 20 lbs. up and down stairs Ability to work outside for an extended period of time Frequently and repetitively, bend, lift and reach to install vehicle parts of varying size and weight overhead, accurately and in allotted timeframes Ability to stand and walk for up to 12 hours/day, including over varied and uneven terrain Stoop, lay, bend, reach, squat, kneel, crouch, twist and crawl for extended periods of time, including up to 12 hours/day Climb and maintain balance on ladders, platforms, or other high structures Ability to find issues in a work process and be alert to safety signals using sight, touch, and hearing Demonstrated ability to handle and manipulate tooling and mechanically fasten bolts within required cycle time Exposures to hazardous materials and ability to follow waste handling/disposal procedures Wearing Personal Protective Equipment, including but not limited to safety glasses, safety shoes, hearing protection, gloves and adhering to prescribed safety rules and guidelines This role requires access to export-controlled information or items that require “U.S. Person” status. As defined by U.S. law, individuals who are any one of the following are considered to be a “U.S. Person”: (1) U.S. citizens, (2) legal permanent residents (a.k.a. green card holders), and (3) certain protected classes of asylees and refugees, as defined in 8 U.S.C. 1324b(a)(3). Saronic does not discriminate on the basis of race, sex, color, religion, age, national origin, marital status, disability, veteran status, genetic information, sexual orientation, gender identity or any other reason prohibited by law in provision of employment opportunities and benefits.

PLEASE WHITELIST ALL EMAILS FROM NO-REPLY@APPLICANTEMAIL.COM AS STATUS UPDATES FOR POSITIONS ARE SENT DIRECTLY FROM THIS EMAIL. DEFINITION / GENERAL PURPOSE: Performs a variety of tasks, semi-skilled and skilled technical work in the operation, maintenance, and repair of the SCADA system. Occasionally works on other water system components such as control valves, check valves, air release valves, motors, and pumps along with other various equipment. Reports water quality test results daily; including work-orders, water quality complaint reports, SCADA Data logs, and as designated by the Superintendent. SUPERVISION RECEIVED AND EXERCISED: Works Under the general supervision of the SCADA Supervisor. ESSENTIAL DUTIES AND RESPONSIBILITIES: Assists in recording all pertinent data required by State, City, and department. Monitors and records data from SCADA system. Monitors chlorine residual within the water system. Performs accuracy tests on multiple Analyzers, Transducers, and Laboratory Test Kits on a monthly basis. Performs operational checks and maintains all pump/storage facilities within the guidelines of TCEQ, City and departmental rules and regulations. Climbs and inspects water storage tanks when required. Records weight, regulates, and changes chlorine bottles when required. Performs chlorinator, pump, and motor maintenance and repair. Responds to customer service complaints. Performs bacteriological water sampling (upon licensing, when required). Repair and maintain control valves, check-valves, and air releases. Troubleshoots minor electrical problems when required. Perform minor repairs to electrical controls, chart machines, timers, phase protectors, and SCADA components when required. Operate and maintain vehicles. Responds to emergency calls periodically (on-call 24 hours for 7 days). Performs other essential duties as required to achieve successful operations of the department. Subject to be called to assist an employee on standby duty. Contribute to team effort by performing other related duties as assigned. Regular and timely attendance is an essential job function. PERIPHERAL DUTIES: Serves as a member of various employee committees, as assigned. Assists in the training and supervising of all employees, contractors, and volunteers. Other Duties as assigned. DESIRED MINIMUM QUALIFICATIONS: High school diploma or GED required. Valid Texas Driver's License rated Class "C" or higher with insurable record. Minimum Experience: None, will train upon employment. Desired Experience: Water distribution operations or operations in a relatable field. SPECIAL REQUIREMENTS: Must attend the required education and training to maintain required certifications. Obtain Class "D" Water Distribution license within eighteen (18) months from date of employment. Obtain Class "C" Water Distribution license within three (3) years from date of employment. KNOWLEDGE, SKILLS AND ABILITIES: Knowledge of equipment, materials, methods and procedures used in water distribution operations; Knowledge of safety procedures and practices related to excavation, confined space entry, trenching, dangerous gases, and other water distribution operations; Ability to evaluate and perform the technical operations of the SCADA system; Ability to perform and diagnose water quality control testing; Ability to work, drive and operate a variety of vehicles and equipment safely and effectively; Ability to obtain/maintain licenses as required by Federal and State laws; Ability to communicate effectively verbally and in writing; Ability to read and understand technical manuals and map; Ability to establish and maintain effective working relationships with fellow employees and other departments, and the public; Ability to monitor, read, interprets various diagrams, devices; chart gauges, and correctly interpret and react to those interpretations; Ability to learn the characteristics of individual pump stations, and water storage facilities. SELECTION GUIDELINES: Formal application, rating of education and experience; oral interview, reference and criminal background checks, and drug screens are required. Job related tests may also be required. TOOLS AND EQUIPMENT USED: Various motorized vehicles including pickup truck (w/trailer), medium sized equipment, various power tools, tampers/compactors, lawn maintenance equipment/tools, cut-off saws, chain saws, jackhammers, pneumatic valve machines, and tapping machines. Various common hand tools, shovels, wrenches, safety equipment such as SCBA's and harnesses, and/or any other tool or equipment inherent to the job. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to lift, carry, and position objects weighting up to 75 pounds in weight. The use of hands and fingers to handle, and/or feel of objects. The employee is occasionally required to sit, stand and/or walk. The employee must occasionally lift and/or move up to 100 pounds, and have good coordination in the manipulation of light and heavy equipment. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is occasionally exposed to moving mechanical parts; fumes or airborne particles and outside weather conditions. The noise level in the work environment is usually loud. The employee in this position will be required to remain on-call due to the any nature of the job. The duties listed above are intended only as illustrations of the various types of work that may be performed. The omission of specific statements of duties does not exclude them from the position if the work is similar, related or a logical assignment to the position. No one will perform the duties of a higher position without prior authorization from an individual authorized to approve. The job description does not constitute an employment agreement between the employer and employee and is subject to change by the employer as the needs of the employer and requirements of the job change.