Engineering technician jobs in Worth, IL - 806 jobs

Controls Technician - Chicago Heights, IL Pay: $38 - $40/hr Shift: 1st Shift | Monday - Friday | 8a-5p We're looking for a skilled Controls Technician to support, maintain, and improve all plant electrical and control systems-including electrical, pneumatic, hydraulic, mechanical, and network subsystems. In this role, you'll act as a technical subject-matter expert, providing troubleshooting support, leading root-cause analysis, training maintenance techs across all shifts, and ensuring smooth operation of all production and facility systems. You'll work closely with the Maintenance Supervisor, Planner, and Manager to keep production on track, equipment running safely, and documentation up to date. What You'll Do Core Responsibilities Inspect, troubleshoot, repair, and maintain food processing and packaging equipment. Perform corrective, preventive, and scheduled maintenance on a wide variety of automated equipment. Diagnose and repair mechanical, electrical, pneumatic, hydraulic, and control-system issues. Install, program, and troubleshoot PLCs, HMIs, servo drives, VFDs, and related systems. Support and coordinate mechanical technicians during breakdowns and major repairs. Maintain accurate documentation on all controls systems-including hardware, software, and changes. Work safely using proper PPE and adhere to all HACCP, Allergen, Food Defense, and GMP policies. Perform inspections and repairs while equipment is operating on a live production schedule. Lead troubleshooting efforts during downtime and expedite equipment recovery. Maintain secondary plant systems (steam, chilled water, pneumatics, HVAC, electrical distribution, refrigeration, etc.). Write and update job procedures and frequencies within the CMMS (SAP). Train technicians on PLC/VFD/HMI troubleshooting using laptops and plant software tools. Occasionally travel for training, equipment work, or parts procurement. Keep the work area clean and report any potential contamination or unsafe conditions immediately. Key Technical Skills Skilled electrical troubleshooting (120V-480V). Strong understanding of PLC programming (RSLogix, FactoryTalk View, ladder logic). Experience with servo systems, VFDs, motor controls, HMIs, pneumatics, and hydraulics. Ability to read and interpret P&IDs, electrical single-line diagrams, loop drawings, termination diagrams, and mechanical layouts. Experience maintaining batching or continuous process systems and their networks. Ability to perform mechanical, plumbing, and instrumentation work at a semi-skilled level. Qualifications Previous experience as a Controls Technician, Automation Technician, or similar role in manufacturing (food industry experience preferred). Strong troubleshooting aptitude-electrical, mechanical, and automation. Ability to work in a fast-paced production environment under pressure. Excellent communication skills and teamwork mindset. Regular, predictable attendance. CMMS experience (SAP preferred): Create work order notifications Enter labor time Provide feedback for procedure updates Write job-specific procedures and task frequencies Apply now for immediate consideration for this Controls Tech position in Chicago Heights, IL . We Look forward to connecting with you!

This role would be for a 3rd shift Electrical Technician and plays a key part in supporting operations through expert troubleshooting, repair, and installation of electrical systems and automated equipment and ensuring the reliability and performance of production systems, working closely with management and maintenance teams. Key Responsibilities: • Troubleshoot and repair electro-mechanical systems with minimal supervision • Support installation and startup of new equipment • Perform preventive maintenance on automated material handling systems • Work with Allen Bradley PLCs, VFDs, HMIs, and 480V electrical systems • Interpret technical documents including blueprints, schematics, and manuals • Collaborate with cross-functional teams to ensure equipment uptime and safety • Follow all safety protocols including Lockout/Tagout, and GMP's Qualifications: • High School Diploma or GED required • 8+ years of industrial electrical experience • 3+ years of PLC programming experience (RSLogix 500, Studio 5000) • Proficient with FactoryTalk View Studio, VFDs, HMIs, analog sensors, and 480V systems • Strong skills in electrical control wiring and panel assembly • Strong communication skills and ability to work independently and collaboratively • Willingness to work overtime and flexible hours as needed Salary Range: $30hr-$40hr Benefits: Bonus Offered Health, dental, and vision, life, short/long term disability insurance 401(k) offering Paid sick leave where applicable by state law (40 hours). LHH is a leader in permanent recruitment-and in the placement of top talent. Our areas of specialty include office administration, customer service, human resources, engineering, and supply chain and logistics. Please feel to check us out and apply for other opportunities if this role isn't a perfect match. Equal Opportunity Employer/Veterans/Disabled To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit *************************************

Huron is a global consultancy that collaborates with clients to drive strategic growth, ignite innovation and navigate constant change. Through a combination of strategy, expertise and creativity, we help clients accelerate operational, digital and cultural transformation, enabling the change they need to own their future. Join our team as the expert you are now and create your future. Huron is a global consultancy that collaborates with clients to drive strategic growth, ignite innovation, and navigate constant change. We're seeking a Machine Learning Engineer to join the Data Science & Machine Learning team in our Commercial Digital practice, where you'll design, build, and deploy intelligent systems that solve complex business problems across Financial Services, Manufacturing, Energy & Utilities, and other commercial industries. This isn't a research role or a support function-you'll own the full ML solution lifecycle from problem definition through production deployment. You'll work on systems that matter: forecasting models that inform multi-million-dollar decisions, agentic AI systems that automate complex workflows, and operational ML solutions that transform how enterprises run. Our clients are Fortune 500 companies looking for partners who can deliver, not just advise. The variety is real. In your first year, you might build an agentic demand forecasting system for a global manufacturer, deploy an intelligent knowledge processing pipeline for a financial services firm, and architect an energy grid demand simulation model for a utilities company. If you thrive on learning new domains quickly and shipping intelligent production systems, this role is for you. What You'll Do Design and build end-to-end ML solutions-from data pipelines and feature engineering through model training, evaluation, and production deployment. You own the outcome, not just a piece of it. Develop both traditional ML and generative AI systems, including supervised/unsupervised learning, time-series forecasting, NLP, LLM applications, RAG architectures, and agent-based systems using frameworks like Agent Framework, LangChain, LangGraph, or similar. Build financial and operational models that drive business decisions-demand forecasting, pricing optimization, risk scoring, anomaly detection, and process automation for commercial enterprises. Create production-grade APIs and services (FastAPI, Flask, or similar) that integrate ML capabilities into client systems and workflows. Implement MLOps practices-CI/CD pipelines, model versioning, monitoring, drift detection, and automated retraining to ensure solutions remain reliable in production. Collaborate directly with clients to understand business problems, translate requirements into technical solutions, and communicate results to both technical and executive audiences. Required Qualifications 2+ (3+ years for Sr. Associate) years of hands-on experience building and deploying ML solutions in production-not just notebooks and prototypes. You've trained models, put them into production, and maintained them. Strong Python and JavaScript programming skills with deep experience in the ML ecosystem (NumPy, Pandas, Scikit-learn, PyTorch or TensorFlow, etc.) and proficiency with JavaScript web app development. Solid foundation in ML fundamentals: supervised and unsupervised learning, model evaluation, feature engineering, hyperparameter tuning, and understanding of when different approaches are appropriate. Experience with cloud ML platforms, particularly Azure Machine Learning, with working knowledge of AWS SageMaker or Google AI Platform. We're platform-flexible but Microsoft-preferred. Proficiency with data platforms: SQL, Snowflake, Databricks, or similar. You're comfortable working with large datasets and building data pipelines. Experience with LLMs and generative AI: prompt engineering, fine-tuning, embeddings, RAG systems, or agent frameworks. You understand both the capabilities and limitations. Ability to communicate technical concepts to non-technical stakeholders and work effectively with cross-functional teams. Bachelor's degree in Computer Science, Engineering, Mathematics, Physics, or related quantitative field (or equivalent practical experience). Willingness to travel approximately 30% to client sites as needed. Preferred Qualifications Experience in Financial Services, Manufacturing, or Energy & Utilities industries. Background in forecasting, optimization, or financial modeling applications. Experience with deep learning frameworks such as PyTorch, Tensorflow, fastai, DeepSpeed, etc. Experience with MLOps tools such as MLflow and Weights & Biases. Contributions to open-source projects or familiarity with open-source ML tools and frameworks. Experience building agentic AI systems using Agent Framework (or predecessors), LangChain, LangGraph, CrewAI, or similar frameworks. Cloud certifications (Azure AI Engineer, AWS ML Specialty, or Databricks ML Associate). Consulting experience or demonstrated ability to work across multiple domains and adapt quickly to new problem spaces. Master's degree or PhD in a quantitative field. Why Huron Variety that accelerates your growth. In consulting, you'll work across industries and problem types that would take a decade to encounter at a single company. Our Commercial segment spans Financial Services, Manufacturing, Energy & Utilities, and more-each engagement is a new domain to master and a new system to ship. Impact you can measure. Our clients are Fortune 500 companies making significant investments in AI. The models you build will inform real decisions-production schedules, pricing strategies, risk assessments, capital allocation. You'll see your work drive outcomes. A team that builds. Huron's Data Science & Machine Learning team is a close-knit group of practitioners, not just advisors. We write code, train models, and deploy systems. You'll work alongside engineers and data scientists who understand the craft and push each other to improve. Investment in your development. We provide resources for continuous learning, conference attendance, and certification. As our DSML practice grows, there's significant opportunity to take on technical leadership and shape our capabilities. Position Level Associate #J-18808-Ljbffr

Join our dynamic team as a Maintenance Technician II at our state-of-the-art logistics center, where your expertise will be pivotal in ensuring operational excellence and the seamless functioning of our facility. As a skilled technician, you'll play a vital role in maintaining and repairing equipment, mainly conveyor systems, and upholding our commitment to delivering top-tier service. Shift: 11am-7:30pm *Must have working knowledge of English language for training and safety purposes Execute scheduled preventative maintenance and document repair outcomes thoroughly. Manage tools and ensure accurate maintenance inventory. Support training initiatives for maintenance staff. Maintain equipment, facility, and grounds appearance, including waste removal services. Update maintenance records using computerized systems. Conduct minor welding tasks and adhere to safety protocols. Troubleshoot complex electrical controls and install electrical components. 3-5 years of experience in industrial or commercial maintenance. ~ Classroom training or its equivalent on electrical controls required. ~ Must have training or equivalent for basic AC & DC electricity. ~ Working knowledge and experience with various electrical systems ranging from 24VDC to 480V 3phase. ~ Basic PLC (Programmable Logic Controllers) and VFD (Variable Frequency Drives) experience. ~ Able to keep non-standard hours, work overtime, and be available on call occasionally. High School Diploma/G.These principles shape how we work with each other, our partners, and our communities as we drive innovation and create lasting impact. Elevate Your Personal Well-Being: Boost your financial, physical, and mental well-being through seminars, events, and our global Life Empowerment Assistance Program. Diversity, Equity & Inclusion: It's not just a phrase to us; Join us in celebrating our global diversity through inclusive education, meaningful peer-to-peer conversations, and equitable growth and development opportunities. Network with other new co-workers within your first 30 days through our onboarding program. Connect with Your Community: Participate in internal, peer-led inclusive communities and activities, including business resource groups, local volunteering events, and more environmental and social initiatives. At TD SYNNEX, we're proud to be recognized as a great place to work and a leader in the promotion and practice of diversity, equity and inclusion. We are an equal opportunity employer and committed to building a team that represents and empowers a variety of backgrounds, perspectives, and skills. All qualified applicants will receive consideration for employment without regard to race, color, religion, national origin, gender, gender identity or expression, sexual orientation, protected veteran status, disability, genetics, age, or any other characteristic protected by law.

Looking to increase your Sat&Sun -or- Sat -or- Sun Weekend Earnings? Nidec Mobility (Automotive Electronics) seeks a highly experienced Equipment Maintenance Technician (automated electronics (SMT / ECU) assembly lines who is looking for part time weekend work (2nd or 3rd shifts). High Sat / Sun Pay for the High Performer. 2nd 1:30PM-9:45p 3rd 9:30PM - 5:45a Objective Under direction of the Maintenance Technician Supervisor, technicians performs various skilled and complex tasks in the repair and maintenance of automated electronic assembly production machinery and equipment which may include, but is not limited to, high speed automated -assembly line equipment, contact welding and press machines, axial and radial inserters. Responsible to continuously improve the equipment and machinery while demonstrating excellence in maintenance service. Essential Responsibilities Monitor, analyze, diagnose, fine tune or repair problems in conjunction with manufacturing engineering and production supervisors. Reads and interprets blueprints, drawings, wiring schematic diagrams, and complex equipment manuals. Utilizes basic mechanical and electrical troubleshooting skills in problem assessment. Assists in testing and evaluating equipment performance. . Assists with developing and maintaining the equipment spare parts inventory. May complete purchase requisitions for the purchase of spare parts. Assists in investigating causes of machine problems, raw materials, tooling and equipment. Recommends improvements to processes and equipment to improve efficiency. Properly documents new procedures and machine changes or additions. Accurately completes all paperwork associated with PM and machine downtime. Assists in creating special fixtures or modify existing equipment with the use of surface grinders, milling machines, arc welder, and lathes. Utilizes various diagnostic equipment and measuring devices such as voltmeters, calipers, micrometers, and oscilloscopes. Supports and participates in the Company's management and quality system including continuous improvement efforts. Experience: 5+ years experience, within automated assembly equipment Education: High School or Equivalent Knowledge/Skills/Abilities Strong knowledge of electro-mechanical equipment operating under PLC's, robotics, machining, pneumatics, hydraulics, and sensor controls. Expert experience with various diagnostic equipment and measuring devices such as voltmeters, calipers, micrometers, and oscilloscopes. Effective interpersonal and communication skills with strong time and project management skills. Basic PC skills (Microsoft Office, Word and Excel).Familiarity with computerized PM program preferred. Preventative maintenance experience with exposure to computer software and systems. NOTE: This position Is Not open to external sourcing (Recruiting agencies) All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

RELOCATION ASSISTANCE: No relocation assistance available CLEARANCE TYPE: NoneTRAVEL: NoDescriptionAt Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work - and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history. Northrop Grumman Mission Systems is looking for you to join our team as an Electronic Technician 3 based out of Rolling Meadows, IL. The selected candidate will perform routine technical functions related to supporting the design, assembly, testing, and maintenance of advanced electronic systems used in mission-critical applications. In this role, you will work hands-on with electronic assemblies, circuit boards, and test equipment to ensure systems meet performance and quality standards. This position is well-suited for someone who thrives in a fast-paced environment, who enjoys problem-solving and takes pride in delivering reliable, high-quality work. The selected candidate will work primarily during the 2nd or 3rd shift hours. What You'll Get to Do : Perform functional and performance testing, troubleshooting, and repair of LITENING targeting Pods and subassemblies Operate specialized test stations and test equipment. Perform routine operational tests and fault isolation on systems and equipment. Execute test procedures, record data, and ensure compliance with engineering specifications and military standards. Maintain test documentation, calibration records, and ensure compliance with safety and ESD protocols. Support root cause analysis of test failures and assist with data collection and corrective action implementation. Assist with environmental testing and system-level verification. Maintain compliance with safety, quality, and security standards *****NOTE: Must be available to work an off-shift schedule (2nd or 3rd shift). ***** Basic Qualifications for Electronic Technician 3 : High School Graduate and 4 years of related experience or: Electronics training equivalent to 2 years of technical trade school or military technical school Experience in military or aerospace manufacturing or depot environments. U.S. Citizen Preferred Qualifications for Electronic Technician 3 : Familiarity with testing or maintaining similar electro-optical/infrared targeting systems Familiarity with avionics systems interfaces. Knowledge of automated test systems and data acquisition software. Experience with SAP/GOLD. MANUMS Primary Level Salary Range: $63,500.00 - $105,900.00The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions.Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. Employees in Vice President or Director positions may be eligible for Long Term Incentives. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business.The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates.Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO and pay transparency statement, please visit *********************************** U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.

As an Electromechanical Technician, you will report to the Plant Engineer or Maintenance Supervisor and perform maintenance tasks to ensure the high-quality, efficient, and timely shipment of products. Safety, quality, productivity, and a strong work ethic are integral to our culture. **Responsibilities** + Understand and follow plant safety rules, including Lockout/Tagout (LOTO) and safe machine operation. + Read and interpret electrical blueprints, wiring diagrams, schematics, specifications, and technical data. + Work on motors, contractors, and relays using a multimeter to verify component functionality. + Operate advanced shop equipment such as bandsaws, mills, and lathes. + Maintain and repair Chillers, Process pumps, compressors, ink pumps, and glue pumps. + Analyze and resolve all mechanical and electrical issues related to the equipment. + Demonstrate solid knowledge of electrical controls/PLCs, including troubleshooting and repairing electrical systems. + Perform preventative, predictive maintenance, routine repairs, and calibration on manufacturing process equipment with minimal downtime. + Diagnose the root cause of problems with production equipment to determine the best solution: electrical or mechanical. + Document parts used and repairs completed in the CMMS and assist in maintaining an organized parts room. + Participate in Performance System activities such as 5Star, Pillar Teams, Audits, and Near Misses. + Ensure regular, consistent attendance and punctuality. + Use Personal Protective Equipment where required. + Ensure proper and safe operational conditions of all production and related equipment. **Essential Skills** + Troubleshooting skills in mechanical and electrical areas. + Experience as a Maintenance Technician or Electro-mechanical role. + Ability to read and interpret blueprints. + Knowledge of hydraulics and pneumatics. **Additional Skills & Qualifications** + Experience in an industrial environment or military background in troubleshooting, repairing, and maintaining manufacturing equipment. + Preferred industry experience with blown films, sheet extruders, printing, lamination, and slitting. + Experience with PLC troubleshooting, industrial and motor controls is a plus. + Ability to operate a forklift. + Comfortable with mechanical lifts, ladders, kneeling, bending, twisting, and lifting up to 50 lbs. + Ability to work independently and manage multiple tasks in an off-shift position with rotating shifts that require overtime, including weekends. **Why Work Here?** We offer a comprehensive total rewards package, including competitive pay and benefits. Our benefits include medical, dental, and vision coverage, a 401(k) retirement plan with company match, wellbeing tools, various insurance plans, and tuition reimbursement. We also provide opportunities for progression planning and an employee assistance program to support holistic health. **Work Environment** Work in a 500,000 sq. ft. facility where safety is a top priority. The facility is extremely clean and well-organized, adhering to GMP standards. Required safety gear includes safety shoes, hair nets, ear plugs, and safety glasses. Departments include Print, Lamination, Slitting, Warehouse, and Maintenance. The workforce is strong and tenured, with recent investments in new machinery and additional capital expenditures planned. Updated breakrooms feature a new self-serve vending process. **Job Type & Location** This is a Contract to Hire position based out of Elk Grove Village, IL. **Pay and Benefits** The pay range for this position is $35.20 - $42.88/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) **Workplace Type** This is a fully onsite position in Elk Grove Village,IL. **Application Deadline** This position is anticipated to close on Jan 6, 2026. **About Aerotek:** We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry - from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies' construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Assignment Employee ESSENTIAL JOB RESPONSIBILITIES: Assist engineers to create, modify, and test new and existing products Support product design, development, and manufacturing preparation-ramp, building prototypes, fixtures, and test samples to validate concepts and accelerate rollout Conduct experiments and investigations under the guidance of Engineers Analyze operations and engineering processes and offer suggestions for improvement Use standard tools such as lathes, mills, drills (and related) to build samples or test concepts; leverage test and measurement equipment to validate performance QUALIFICATIONS: Track record of working collaboratively across departments to solve technical / product problems Hands-on, practical product development approach with demonstrated focus on prototyping, sample-development, and testing Strong prioritization, time- management, and self-motivation skills; high energy and focus Strong project management orientation Strong written and verbal communication EDUCATION AND EXPERIENCE: 2-yrs experience as a technician, apprentice, or equivalent in an engineering and/or manufacturing environment Hands-on experience developing and building tools, fixtures, and/or prototype products Experience interpreting and refining engineering drawings Experience with rolling shutters, window treatments, door systems, or windows is a plus Associates degree in Engineering or Manufacturing Technology or equivalent preferred COMPUTER SKILLS: Proficiency with CAD / CAE software Experience with measurement and mechanical testing systems in toolroom and/or protype-lab environments Proficiency with MSOffice COMPENSATION: Base salary commensurate with experience Eligible for Personal Performance Bonus + Company-wide profit sharing Fully paid employee health and basic life insurance 401k- 100% company match up to 10% (after 1 yr.) Paid Vacation

The Senior Casting Technology Manufacturing Engineer provides technical leadership for SX or equiax investment castings across the value stream. You will partner with suppliers and cross-functional teams to drive root cause problem solving, improve producibility, increase productivity, and deliver on business objectives. You will own supplier technical relationships, coach on internal processes/specs/methods, qualify new suppliers, and help develop and industrialize alternate casting technologies. **Job Description** **Roles and Responsibilities** + Provide process and product technical leadership for the Castings commodity, including SX or equiax investment castings. + Develop strong working relationships with casting supplier technical teams. + Partner with suppliers to identify and implement corrective actions to eliminate the cause and prevent recurrence. + Act as a change agent to advance world-class performance and standard work across the supply base. + Own supplier technical relationships; mentor suppliers on GE Aerospace processes, specifications, and methods; ensure compliance and capability. + Lead cross-functional problem solving, to identify true root cause and implement sustainable corrective and preventive actions. + Improve manufacturability through design-for-casting, specification clarity, and process capability improvements. + Clearly communicate progress, risks, challenges, and countermeasures to leadership and stakeholders. + Review and approve significant/special processes; ensure adherence to standards and qualification requirements. + Collaborate with Quality and Design Engineering to ensure new and changed processes meet established metrics; align with other commodities on strategy and objectives + Partner with suppliers and internal teams to interpret drawings/specifications, ensuring conformance and clarity. + Identify and onboard new suppliers; lead technical qualifications and readiness through Manufacturing and Quality Planning reviews and support supplier Castings Audits. + Ability to travel to supplier sites 30%-50% **Minimum Required Qualifications** + Bachelor's degree in Engineering (Materials/Metallurgy, Mechanical, Manufacturing, or related field) + Minimum of 5 years of materials engineering, castings, mechanical engineering or a related field **Desired Characteristics and Experience** + Additive manufacturing experience. + Metal Injection Molding (MIM) experience. + Proficiency with Siemens NX or comparable CAD. + Sand Castings Experience. + Titanium Experience. + Significant experience in investment castings (SX or equiax), with demonstrated yield, capability, and cost improvements + Hands-on expertise across investment casting special processes (wax, shell, melt/solidification control, heat treat, HIP, NDT) and specification compliance. + Strong problem solving and project management skills. + New Product Introduction experience. + Experience maturing technologies and processes. + Excellent communication and stakeholder management; ability to influence without authority + Humble learner: Respectful, receptive to feedback, agile, and continuously improving; seeks out diverse perspectives. + Transparent communicator: Shares critical information proactively; speaks with candor; engages constructively to resolve issues. + Focused and accountable: Fast learner with strong ownership; meets commitments and drives results against SQDC targets ( _Safety, Quality, Delivery and Cost in that order)_ . **Pay and Benefits:** + The salary range for this position is $ 116,000.00 - 155,000.00. The specific salary offered to a candidate may be influenced by a variety of factors including the candidate's experience, their education, and the work location. In addition, this position is eligible for a performance bonus/variable incentive plan. + GE provides a comprehensive benefits package that provides access to plans which support the overall wellbeing of our employees and their dependents. These benefits include, but are not limited to, health care coverage (medical, dental, vision, pharmacy), a retirement plan that includes Company Retirement Savings and a 401K with Company matching, Life Insurance options, Disability coverage, paid time-off, EAP, and more. Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach, a 24/7 nurse-based resource; and access to the Employee Assistance Program, providing 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Retirement Savings Plan, a tax-advantaged 401(k) savings opportunity with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. General Electric Company, Ropcor, Inc., their successors, and in some cases their affiliates, each sponsor certain employee benefit plans or programs (i.e., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace, or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. GE Aerospace offers comprehensive benefits and programs to support your health and, along with programs like HealthAhead, your physical, emotional, financial and social wellbeing. Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach from GE Aerospace; and the Employee Assistance Program, which provides 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Aerospace Retirement Savings Plan, a 401(k) savings plan with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. GE Aerospace (General Electric Company or the Company) and its affiliates each sponsor certain employee benefit plans or programs (i.e., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. _This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3))._ **Additional Information** GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** No \#LI-Remote - This is a remote position GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

See PDF for description: ************ joliet. gov/home/showpublisheddocument/36*********************0

Folding Guard is an industry leader in manufacturing security and safety products. With a strong commitment to innovation and quality, we serve a diverse range of industries. We are seeking a motivated Trainee with an engineering background and a focus on Mechanic or Industrial Engineering, specifically with expertise in Lean Manufacturing Concepts, to join our team. Position Overview: As a Trainee in Mechanical /Industrial Engineer with a specialization in Lean Manufacturing Concepts, you will play a key role in optimizing our manufacturing processes and ensuring the highest level of operational efficiency. This role is designed for an engineering graduate who is passionate about applying lean methodologies to drive continuous improvement in a manufacturing environment. Key Responsibilities: Collaborate with cross-functional teams to identify areas for process enhancement and waste reduction. Contribute to the implementation of lean manufacturing techniques to streamline production processes. Assist in analyzing production workflows, identifying bottlenecks, and proposing viable solutions. Engage in root cause analysis to address operational challenges and implement corrective actions. Support the establishment and monitoring of key performance indicators (KPIs) to measure process effectiveness. Participate in the development and execution of training programs to promote a culture of continuous improvement. Attend workshops, training sessions, and learning opportunities to deepen your knowledge of lean manufacturing concepts. Qualifications: Bachelor's degree in Engineering, with a focus on Mechanical, Industrial Engineering, or related field. Solid understanding of lean manufacturing principles, methodologies, and tools. Familiarity with concepts such as Value Stream Mapping, 5S, Kaizen, Six Sigma, etc. Strong analytical skills and the ability to identify process inefficiencies. Effective communication skills to collaborate with cross-functional teams. Detail-oriented, organized, and able to manage multiple tasks concurrently. Proficiency in Microsoft Office Suite and data analysis software. Benefits: Comprehensive training and mentorship to develop expertise in lean manufacturing methodologies. Exposure to real-world projects that contribute to the organization's growth and success. Opportunity to work alongside experienced professionals and gain insights into the manufacturing industry. Competitive compensation and potential for career advancement within the organization. Application Process: If you are an engineering graduate with a keen interest in applying lean manufacturing concepts to industrial processes, we encourage you to apply. Applications will be reviewed on a rolling basis. Folding Guard is committed to diversity and is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or protected veteran status. Individuals with disabilities will be provided with reasonable accommodations as needed. Join us in our mission to drive manufacturing excellence through continuous improvement. Apply today and be a part of our innovative team!

SummaryJob Description Roles and Responsibilities: Responds to service calls to evaluate, diagnose, perform repair/planned maintenance (PM) on progressively complex customer's biomedical equipment, and drives customer satisfaction through Service Excellence. Responsibilities : Evaluate complex, customer biomedical equipment issues, and implement appropriate repairs. Perform planned maintenance (PM), safety and environmental inspections, and maintain effective customer relations. Follow and guide others as needed regarding appropriate GE policies, procedures, hospital protocol, and complete necessary documentation. Effectively communicate and partner with teammates and colleagues. Establish and engage in proactive daily communications with customers, to ensure resolution and proper follow up, leading to customer satisfaction. Implement GE/customer facility contract, supporting business goals and objectives. Lead, instruct, and assist technicians on basic and complex repairs and resolution. Work as a member of local team to provide efficient service delivery to all accounts within assigned area. Share on-call/pager responsibility. Document all repair actions and submit reports/summaries according to schedule. Ensure proper care of spares, tools and test equipment, and ensure calibration. Maintain approved parts inventory. Manage vendors' service delivery processes in compliance with GE policies, as instructed. Enhance and maintain technical knowledge of current standards, codes, and procedures regarding safe and effective use of medical equipment through formal instruction. May perform role of Site Leader (e.g., direct activities of fellow Biomedical Technicians assigned to site, engage in a more interactive customer relationship, which may include Safety Committee or other participation, with regard to overall account activity). Meet Health and Human Services, Environment Health and Safety requirements, and/or all other applicable regulatory requirements. Qualifications : Associate's or Bachelor's degree in Electrical Engineering, Biomedical Engineering, Mechanical Engineering, or related field and 2+ years of experience servicing medical equipment; OR equivalent military education and 2+ years of experience servicing electrical or mechanical equipment; OR High School Diploma/GED and 4+ years of experience servicing medical equipment. Analytical and communication skills with the ability to communicate technical issues to the customer in an easy to understand manner. The successful applicant must comply with GEHC's standard background check, including a post offer drug test. In addition, during employment, the employee must comply with all customer access policies, including but not limited to obtaining and/or providing proof of required immunizations, and additional drug tests or background checks (including a federal government background check if assigned to support a contract with the federal government). Special Physical Requirements: Candidate must be able to lift, carry, push, and pull up to 35 lbs. unassisted and frequently bend, stoop, twist, climb, crouch/squat, kneel/crawl, sit and stand for long periods of time. Candidate must also be able to reach at, above and below shoulder level, flex/extend neck and have good hand and finger dexterity. Specific vision abilities required by this job may include color, close vision, distance vision, peripheral vision and depth perception. Willingness to be available ""after hours"", or work a rotating On-Call schedule, including weekends, for critical issues and coverage, as necessary. Quality Specific Goals: Aware of and comply with the GEHC Quality Manual, Quality Management System, Quality Management Policy, Quality Goals, and applicable laws and regulations as they apply to this job type/position. Complete all planned Quality and Compliance training within the defined deadlines. Identify and report any and all customer quality or compliance concerns immediately to the Quality Organization We will not sponsor individuals for employment visas, now or in the future, for this job opening. For U.S. based positions only, the pay range for this position is $63,800.00-$95,700.00 Annual. It is not typical for an individual to be hired at or near the top of the pay range and compensation decisions are dependent on the facts and circumstances of each case. The specific compensation offered to a candidate may be influenced by a variety of factors including skills, qualifications, experience and location. In addition, this position may also be eligible to earn performance based incentive compensation, which may include cash bonus(es) and/or long term incentives (LTI). GE HealthCare offers a competitive benefits package, including not but limited to medical, dental, vision, paid time off, a 401(k) plan with employee and company contribution opportunities, life, disability, and accident insurance, and tuition reimbursement. GE HealthCare offers a great work environment, professional development, challenging careers, and competitive compensation. GE HealthCare is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE HealthCare will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). While GE HealthCare does not currently require U.S. employees to be vaccinated against COVID-19, some GE HealthCare customers have vaccination mandates that may apply to certain GE HealthCare employees. Relocation Assistance Provided: Yes

Franciscan Health Olympia Fields Campus 20201 S Crawford Ave Olympia Fields, Illinois 60461 The Biomedical Technician II works within the Clinical Engineering Department to support activities related to the service and management of the medical equipment. This position may perform activities, such as data entry and analysis within the medical equipment database, compiling and submitting various reports, direct communication with vendors and customers, and performing basic technical service activities. For all tasks, there will be an emphasis on high quality and contribution to the department's efforts toward cost-effective management of the medical equipment. The Biomedical Technician II may work within any assigned area(s) of Franciscan Health and at other locations supported by the Clinical Engineering Department, under the guidance of Biomedical Equipment Technicians or Clinical Engineers, as directed by Clinical Engineering management. WHO WE ARE With 12 ministries and access points across Indiana and Illinois, Franciscan Health is one of the largest Catholic health care systems in the Midwest. Franciscan Health takes pride in hiring coworkers that provide compassionate, comprehensive care for our patients and the communities we serve WHAT YOU CAN EXPECT * Assess new technology and assists in the procurement of clinical equipment. * Establish and implement plan for collecting data on new technology. * Review pre-purchase evaluation. * Install, inspect, troubleshoot, repair, calibrate, and perform modifications on diagnostic and therapeutic medical electrical. * Perform and provide mechanical repairs, modifications, and calibrations of all classes of biomedical equipment, including ECG, pulse, blood pressure and respiration monitors, defibrillators, IV pumps, electrosurgical units, respirators, anesthesia units, hyperthermia units, suction and pressure pumps, centrifuges, and any other related biomedical instrumentation. * Initiate PM, and repair on medical equipment, to ensure it is safe and effective for use. * Oversee the use of medical devices and initiate needed changes for improvement of utilization * Ensure compliance with applicable accredited agencies for assigned areas. QUALIFICATIONS * Required High School Diploma/GED GED or high school diploma * Preferred Associate's Degree Biomedical Engineering Technology or related * Preferred Bachelor's Degree Biomedical Engineering Technology or related * 2 years With BS degree in a technology related field, at least 2 years relevant progressive service experience in Healthcare Technology Required * 4 years With AS degree in a technology related field, at least 4 years relevant progressive service experience in Healthcare Technology Required * 7 years If neither AS nor BS degree in a technology related field, 7 years relevant progressive service experience in a related field with at least 2 years in Healthcare Technology Required * A+ Certified Professional (A+CERT) - CompTia A+, Network +, Security + or related IT certification preferred within 24 months * Certified Biomedical Equipment Technician (CBET) - Association for the Advancement of Medical Instrumentation CBET, CHTM or CCE preferred within 24 months TRAVEL IS REQUIRED: Never or Rarely JOB RANGE: Biomedical technician II $25.36-$37.73 INCENTIVE: This position is eligible for shift pay for eligible shifts, and call pay for qualified on-call hours EQUAL OPPORTUNITY EMPLOYER It is the policy of Franciscan Alliance to provide equal employment to its employees and qualified applicants for employment as otherwise required by an applicable local, state or Federal law. Franciscan Alliance reserves a Right of Conscience objection in the event local, state or Federal ordinances that violate its values and the free exercise of its religious rights. Franciscan Alliance is committed to equal employment opportunity. Franciscan provides eligible employees with comprehensive benefit offerings. Find an overview on the benefit section of our career site, jobs.franciscanhealth.org.

Lead Process Technician - Direct Hire - 1st Shift -- Full-time Position - Addison, Illinois We're seeking a Lead Process Technician with strong injection molding expertise to take ownership of process development and standardization across production. This role is ideal for someone who enjoys building processes from the ground up, improving consistency, and driving efficiency across multiple molds and machines.You'll play a hands-on leadership role-developing process documentation, optimizing cycle times, and supporting production through technical expertise and continuous improvement. Job Highlights - Lead Process TechnicianShift: Full-Time -1st Shift Monday-Friday 7:00 AM -3:15 PM with some Mondays starting at 5:00 AM occasionally.Location: Addison, ILDepartment: Production - Injection MoldingSalary: $35.00 - $ 38.00/hr - Depending on experience Preferred Qualifications: Molding Certification - Like Paulson, RJG, EtcSome Travel Required: 1-2 times a year for 2-3 days travel required What You'll Do: Create, document, and maintain process sheets and SOPs from scratch for all mold and machine combinations Drive improvements in cycle time, scrap reduction, and overall product quality Lead and support mold setups, startups, color changes, and troubleshooting Train and mentor technicians while evaluating training effectiveness Partner with Maintenance to maximize equipment uptime Collaborate with Quality to identify and resolve process-related issues Work with outside vendors to evaluate new molding technologies Maintain accurate production and inventory documentation (FIFO-based systems) Set molds using lift equipment and maintain molding-related tools and equipment #IND1

Your Career Begins at Timken If you're ready for a challenging career that provides you with the ability to advance personally and professionally, look to Timken. Our employees make the world more productive by improving the efficiency and reliability of the machinery that keeps industry in motion. Together, We'll Keep the World Moving Forward. Not everyone knows what Timken makes. But you'll recognize what we make possible. Timken engineers solutions that keep the world moving by offering products and services to keep the world's equipment, machinery and vehicles in motion. Everywhere from NASCAR to NASA. Position Summary: We have an opportunity at our Montgomery, IL location for a Manufacturing Engineering Technician. This role specifies and develops operational sequences and manufacturing methods to ensure safe, efficient, and cost‑effective production. This role provides technical support to internal and external customers, supports CNC machines with programming, troubleshooting, and DNC library management, and collaborates across disciplines to optimize part manufacturability and process reliability What We Offer: The annual salary range for this position is $50,000 - $65,000 based on experience. Comprehensive benefits package, including medical, dental and vision coverage. Benefits start on first day of employment. 401(k) retirement savings plan with generous company match. 10 paid holidays per year plus paid vacation. Paid parental leave at one year of service. Employee discounts on products and services. Education expense reimbursement, eligible to apply at first day of employment. Opportunities for professional development and career growth. Essential Responsibilities: Partner with product engineers to develop part configurations that are manufacturable and cost‑effective. Work with the quoting department to define and review process steps, tooling needs, and cycle times to produce accurate costing for new and existing parts. Act as a liaison with suppliers to ensure reliability and cost effectiveness of outsourced processes. Develop, review, and maintain routings and process documentation regularly to ensure process efficiency and effectiveness. Collaborate with manufacturing engineering and production teams to develop and refine CNC programs for new parts using best-practice, efficient programming techniques. Review and maintain existing CNC programs and DNC library management to ensure up-to-date, efficient program usage. Troubleshoot CNC programs, setups, and tooling; support and train production personnel as needed. Use CAD/CAM modeling software to perform analysis, generate layouts, and support programming and fixturing. Develop or review process steps for sales order checklists to support accurate order processing and manufacturing readiness. Develop, review, and troubleshoot manufacturing processes, setups, fixtures, and cycle times; provide training and production floor support. Evaluate, recommend, and test machinery and equipment for process implementation and capability improvements. Determine rework methods to salvage non-conforming parts and minimize scrap. Perform analysis and layout designs using engineering design software; assist with design and fabrication of prototype parts Basic Qualifications: High school diploma or equivalent. Preferred associate degree or technical diploma in Manufacturing Technology, Mechanical Engineering Technology, or related field. At least 5 years of experience in machining processes, tooling, fixtures, and machining best practices. Proven experience supporting CNC machining operations, including programming (CAM), troubleshooting, and DNC library management Able to read and interpret engineering drawings and customer specifications; proficient with CAD and internal software systems. Self-accountability to meet deadlines. All qualified applicants shall be treated equally according to their individual qualifications, abilities, experiences and other employment standards. There will be no discrimination due to gender or gender identity, race, religion, color, national origin, ancestry, age, disability, sexual orientation, veteran/military status or any other basis protected by applicable law.

Requisition No: 860466 Agency: Department of Corrections Working Title: Electronic Technician II - Statewide Pay Plan: Career Service Position Number: 70044444 Salary: $43,080.70 - $47,867.30 annually Posting Closing Date: 04/01/2026 Total Compensation Estimator Tool FLORIDA DEPARTMENT OF CORRECTIONS We Never Walk Alone Electronic Technician II- Statewide This open competitive advertisement is for a Career Service position located at various Correctional Institutions in the Maintenance Department statewide. The mission of Facilities Management and Building Construction at the Florida Department of Corrections is to provide a safe, secure, and efficient environment for staff, inmates, and visitors. This is achieved through the effective management, maintenance, and construction of correctional facilities, ensuring they meet all regulatory standards and support the department's overall mission of public safety and rehabilitation. This position is not a telework position and is required to report to the FDC office in the area it serves. JOB DUTIES: This working position is responsible for the maintenance, repair, and installation of all types of electronic systems and devices including but not limited to, electronic perimeter security systems, internal electronic security systems, electronic and electrical locking control systems, CCTV systems, communications systems, and associated systems and components utilized in the operation of a correctional facility. * Responsible for the maintenance, repair, and installation of electrical infrastructure, systems, and devices, and provides on-the-job training to supervised inmates. * Performs preventive maintenance, tests, logs, and keeps records for electrical systems as per Department guidelines. * Repairs and modifies complex electronic equipment and operates, repairs, and calibrates various testing equipment. * Plans and organizes work, requisitions necessary parts, and adheres to maintenance and construction policies and procedures. * Prepares reports, maintains custody and control of supervised inmates, participates in departmental staff training, and performs other related duties as required. BENEFITS: * Paid vacation, sick leave, and holidays. * Comprehensive health insurance and life insurance with accidental death and dismemberment benefits. * Supplemental Dental, Vision, Life, Disability and Hospitalization insurance. * Tuition-Free college courses. * Retirement Plans with the Florida Retirement System: * Pension Plan (Traditional Retirement Pension Plan) * Investment Plan (401(K)-Type Retirement Plan) * Deferred Retirement Option Program (Drop) * Deferred Compensation * Recently Retired? Beginning July 1, 2024, there is no longer a reemployment limitation; beginning with the 7th calendar month from the member's distribution date, there are no restrictions on working for an FRS employer. You will not be required to repay any prior distributions, and you may continue receiving distributions from the Investment Plan or Pension Plan without interruption. REQUIREMENTS: * A high school diploma or its equivalent and at least one (1) year of experience in the electronics /electrician field OR four or more years of electronics experience (College or vocational/technical training in one of the above listed trades can substitute for the required experience.) * A valid Driver's License Support of knowledge, skills, and abilities should be demonstrated on the application, in the education, in the work experience, in the work sample, in the interview and/or during reference checks. ADDITIONAL INFORMATION: BACKGROUND SCREENING REQUIREMENT The Florida Department of Corrections requires all job applicants and volunteers to pass a Level 2 background check as per Chapter 435, Florida Statutes. This check must be completed before they can start working or volunteering. EMPLOYMENT ELIGIBILITY The Florida Department of Corrections (FDC) only hires U.S. citizens and those authorized to work in the U.S. FDC uses E-Verify to confirm an employee's eligibility to work after completing the I-9 form. For online application issues, call the People First Service Center at **************. Applications will be accepted until 11:59 PM EST on the closing date. The State of Florida is an Equal Opportunity Employer/Affirmative Action Employer, and does not tolerate discrimination or violence in the workplace. Candidates requiring a reasonable accommodation, as defined by the Americans with Disabilities Act, must notify the agency hiring authority and/or People First Service Center (***************. Notification to the hiring authority must be made in advance to allow sufficient time to provide the accommodation. The State of Florida supports a Drug-Free workplace. All employees are subject to reasonable suspicion drug testing in accordance with Section 112.0455, F.S., Drug-Free Workplace Act. VETERANS' PREFERENCE. Pursuant to Chapter 295, Florida Statutes, candidates eligible for Veterans' Preference will receive preference in employment for Career Service vacancies and are encouraged to apply. Certain service members may be eligible to receive waivers for postsecondary educational requirements. Candidates claiming Veterans' Preference must attach supporting documentation with each submission that includes character of service (for example, DD Form 214 Member Copy #4) along with any other documentation as required by Rule 55A-7, Florida Administrative Code. Veterans' Preference documentation requirements are available by clicking here. All documentation is due by the close of the vacancy announcement. Location:

Data Center Engineering Operations Technician Location: Michigan City, IN Job Type: Full-time We are seeking a Data Center Engineering Operations Technician to join our team and support the day-to-day operations of a high-performance data center environment. In this role, you will be responsible for troubleshooting and resolving issues related to network, hardware, and operating system installations and configurations in a live server environment. You will also play a key role in maintaining the uptime, efficiency, and reliability of our data center infrastructure. Key Responsibilities: Troubleshooting & Issue Resolution: Diagnose and resolve basic network, hardware, and operating system issues in a live server environment. Equipment Maintenance & Repair: Identify, troubleshoot, and resolve equipment malfunctions, coordinating with manufacturers, field representatives, and the logistics department as necessary to procure replacement parts. Process Improvement: Identify areas for operational and efficiency improvements, recommending and assisting in the implementation of solutions to optimize data center performance. Operational Excellence: Ensure all operational processes and procedures are followed with a high level of attention to detail and adherence to deadlines. Collaboration & Communication: Work closely with cross-functional teams, including IT support, engineering, and logistics, to ensure smooth data center operations. Qualifications & Requirements: Experience in troubleshooting and maintaining IT hardware, servers, and networking equipment. Knowledge of data center infrastructure, including power, cooling, and cabling. Familiarity with operating system installation and configuration (Windows, Linux, etc.). Ability to work effectively in a fast-paced, live production environment. Strong analytical and problem-solving skills with attention to detail. Excellent communication and teamwork abilities. [Any required certifications, e.g., CompTIA Server+, CCNA, or equivalent, if applicable.] This role offers an opportunity to work with a team of skilled professionals in maintaining and operating critical infrastructure systems within a fast-paced, high-tech environment. CoSourcing Partners is an equal opportunity employer committed to fostering an inclusive and diverse workplace. We do not discriminate based on race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, genetic information, or any other protected status under applicable federal, state, or local laws. We believe in creating a work environment where all employees feel valued, respected, and empowered to contribute to our success. Accommodations are available upon request for applicants with disabilities throughout the hiring process. Join us and be part of a team that values diversity, equity, and inclusion.

Under the direction of the Supervisor, Technical Services or designee, the Electronics Technician is responsible for the troubleshooting, repair, and maintenance of all electronic, logic, and digital equipment and electromechanical devices, including farebox revenue collection system equipment, destination signs, radio, video, and Intelligent Bus System (IBS) equipment for Pace divisions and contract carriers as applicable. Performs other duties as assigned. Essential functions include: Troubleshoots and repairs all farebox revenue collection system equipment. Troubleshoots and repairs all destination sign, radio, video, Intelligent Bus System (IBS) and other related equipment. Modifies and/or fabricates parts to keep equipment in good working order. Uses/maintains computer software/hardware equipment. Tracks equipment and issues through computer data entry. Maintains all records and forms in compliance with applicable regulations and in Pace requirements. Performing other duties as assigned or required. Qualifications Age: 21+ Education: Qualified candidate must have a high school diploma or equivalent. Certification/ License Requirements: Must have a valid driver's license with good driving history. Experience: Must have a minimum of five years of experience working in the field of electromechanics including logic systems, digital circuitry, and electro-mechanical devices and have a strong work history demonstrating the ability to excel in similar roles. Proficiencies: Must have knowledge in the areas of electro-mechanical devices, communications equipment, and complex electronic circuitry. Must be able to understand and operate electrical test equipment to support maintenance and repairs and to operate maintenance vehicles. Must be proficient in Microsoft Office applications (Outlook, Word, Excel, etc.) is preferred. Physical Requirements: Must be able to stand for extended periods of time; Lift up to 100 lbs. Working Conditions: Must be available to work 24 hours a day, 7 days a week, 365 days a year. Work is performed at garages and other facilities, including sites under construction which may be subject to extreme temperature and weather conditions as well as moderate to loud noise levels. Position requires the wearing of protective clothing and shoes and the use of appropriate safety and personal protective equipment. This position is not eligible for hybrid schedule or telecommuting. Salary: Full Salary Range: $54,732 - 107,952 Salary Midpoint: $81,342 Anticipated Starting Salary: $68,037 - 81,342 BENEFITS SUMMARY

ICT (In-Circuit Test) Test Technician (1st shift) Nidec Mobility America Corporation(NMOA) has an immediate opportunity for an energetic and focused ICT Test Technician within our St. Charles, IL location. 1st shift (6a- 2:30p) with Overtime Available Saturdays (and possible some Sundays). A little about Nidec Mobility.. We are the North America headquarters for Nidec Mobility America (locations in Illinois, Michigan, Ohio, Canada, Mexico) and a leading Automotive Electronics Designer and manufacturer of sophisticated electronic sensing and control technology / components. We control the most discrete functions within an automobile, including: power system components, complex user interfaces, seat and power window switches, and instrument panel controls, electronic sensing/radar). Objective Under the general direction of the Mfg. Process Engineering Group Manager ensures that ICT failures are analyzed, root cause of the failure is identified and corrective action is implemented. Essential Responsibilities REQUIRES 5+ Years direct experience with AGILENT/KEYSIGHT 3070 in-circuit test experience to.. Perform visual inspection and electrical testing of all ICT failures. Identifies the root cause of the failure based on ICT output file and multi-meter/bridge readings. Identify soldering issues with the ICT failed boards based on knowledge of IPC-610 Nidec Mobility Quality Standards. Fixes the issues identified or instruct inspectors on how to fix the issue. Records the failure reason in the ICT test database. Setup ICT machine to run failed boards. Analyzes ICT first-pass yield and final yield using automated reports from ICT database and recommends corrective action to ICT technicians. Generate excel reports on a weekly basis about overall ICT rework work-in-process level. Maintain clean and organized work area at all times. Completes daily area clean up at the end of shift May participate in cross-training activities with other related positions Support / Participate in the Company's management and quality system including continuous improvement efforts Notify supervisors, group leaders or technicians of any problems or nonconforming product Support/Implement the Environmental policy as it pertains to work activities Perform other duties as required or assigned which are reasonably within the scope of the activities enumerated above Experience: 5+ Years direct experience with Agilent/Keysight 3070 in-circuit test experience Education: Associate's or 2 Year Degree Knowledge/Skills/Abilities: 5+ Years experience in an analysis/inspection role in electronics manufacturing Working Knowledge of troubleshooting electronic circuits Working knowledge of using Microsoft Windows and Microsoft Excel 3+ Years' experience in Solder inspection/repair Working knowledge of reading circuit diagrams NOTE: This position Is Not open to external sourcing (Recruiting agencies)