Fabricator jobs in New York - 180 jobs

We are looking for a Welder/Fabricator to Support our Advanced Material & Chemicals division in Rochester, NY. As a Welder/Fabricator, you will be responsible for the following job functions: Must be capable of setting up and operating a wide range of fabrication and welding equipment to include but not limited to: band saw, cut off saw, slitting saw, rollers, shears, brake press, press, pipe, laser, plasma weld and various power tools. Must make complex setups and hold close tolerances in the fabrication and weld manufacturing cycle of a variety of parts made from various materials and configurations - bar stock, ferrous and nonferrous metals, stainless steel, aluminum. Employee is responsible for maintaining/improving housekeeping standard in his/her work area and adhering to established safety rules and practices. Must be able to weld the following processes and pass functional weld test: (GTAW) Gas Tig Arc Weld; (GMAW) Gas Mig Arc Weld; (FCAW Flux Core Arc Weld; (SMAW) Stick Metal Arc Weld. Employees will be required to pass additional function tests to meet visual and workmanship requirements on certain products or programs. Must be able to weld in 6G positions: Flat, Vertical, Horizontal, Overhead, etc. as required. Must be able to weld the following materials: Steel, Stainless, Aluminum, and any other materials, some of high complexity, required by a particular program. Must have the knowledge and the ability to apply algebraic, geometric, and trigonometric functions to blueprint dimensions in the manufacture of complex parts. In-process and completed welds shall meet visual and workmanship requirements IAW governing fabrication document(s) to include but not limited to weld contouring, joint fit-up inspection, 5X visual inspection of root weld, weld spatter removal, arc strikes, etc. Welding operations shall follow IAW established Weld Procedure Specifications (WPS) at all times; including but not limited to amperage, volts, travel speed, filler material type, preheat and interpass temperature, etc. Employees assigned to closed areas may be required to assist with ancillary tasks such as painting, blasting, assembly to ensure product completed. Performs fitting and fabrication functions as assigned. Job Qualifications: Must have the ability to read and interpret blueprints. Must possess the knowledge, skill, and ability to set up and operate metal working and welding equipment. Must have the ability, confidence, and self-motivation to apply talents independently and with good judgment. Must pass and maintain required weld certification. Must be able to pass written and practical test on weld specifications and pass visual and workmanship requirements for products or programs. May be required to pass requalification tests when requested by the Company. Such requalification shall be defined by S9074-AQ-GIB-010/248. Developing knowledge is required at the experienced level for some, and thorough knowledge is required at the advanced level for most job requirements. Knowledge of the standard practices, materials, tools, and equipment used in the repair and maintenance of building and equipment. Knowledge of safety issues in the use of tools, equipment, and supplies used in the repair of building and equipment. Skill in the use of mechanized tools, jacks, and hoists. Ability to read manuals and schematics. Ability to communicate with other mechanics about repair work needed. Must be a team player. Must be willing to work in extreme temperatures. Must be able to work in tight spaces. EOE Policy Statement: All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or disability. Estimated Salary: $32.00 - $40.00 Experience Level: 5-10 Years Requisition ID: 608

We are currently seeking an experienced welder to TIG weld aluminum, stainless, and inconel heat transfer components and sub-assemblies for Aerospace applications. 1st Shift Hours: 7:00am - 3:30pm Company Paid Benefits including Medical, Dental, Vision and Paid Time Off Duties and Responsibilities: Weld any and all assemblies in accordance with weld specifications, weld schedules, method sheets and blueprints as required. Inspect all welds for any obvious flaws (IE- Missing welds, Porosity, Incomplete Fusion, Undercut, Starts/Stops/Cracks, Excess reinforcement, Arc strike). Training any new or existing welders on proper weld process techniques or improved welding techniques. Plans details of work order procedures; gathers required tools and materials based on instructions and specifications provided for the job. Repairs and fabricates various items and equipment using cutting, burning, and welding techniques and equipment. Monitors the welding, burning, and fitting process to ensure parts are not overheated or damaged by warping, distortion, expansion, or shrinkage. Prepares, assembles, and tacks weld parts and surfaces to be welded. Maintains, organizes, and cleans equipment and the work area. Notifies supervisor when faulty equipment or defective materials are discovered. Performs other related duties as assigned. Required Skills and Abilities: Responsible for welding assemblies in accordance with weld specifications, weld schedules, method sheets and blueprints as required. Education and Experience: High School education; Trade school preferred Minimum 3 years' experience welding aluminum and stainless Must demonstrate ability to weld in accordance with aerospace welding spec. AWS D17.1 and pass welder certification. Must be able to read and interpret engineering drawings. Must be able to pass annual eye examination. Must be conversant in and read, write, and understand English. Due to ITAR Restrictions, an export license may be required. Equipment Used: Gas Tungsten Arc Welder (Lincoln, Miller) Physical Requirements: Must be able to weld components that are vertical, flat, or overhead. Must have enough manual dexterity and stability as required for precision work. Must be able to see details at close range. Must be able to lift up to 75 pounds at times. Must be able to traverse facilities and machinery by climbing, balancing, lifting, walking, stooping, and carrying materials. The Hughes-Treitler Business Unit designs and manufactures state of the art plate-fin heat exchangers, cold plates, condensers, evaporators, and other heat transfer products. We provide custom design and engineering services, to high quality manufacturing standards, for the aircraft, engine and industrial heat exchangers in the mobile/marine/avionics/space and missile markets. Compensation Employee Type: Hourly Salary Minimum: $50,000 Salary Maximum: $75,000 Incentive: No Disclaimer: Where a specific pay range is noted, it is a good faith estimate at the time of this posting. The actual salary offered will be based on experience, skills, qualifications, market / business considerations, and geographic location. For more information on AMETEK's competitive benefits, please click here. AMETEK, Inc. is a leading global provider of industrial technology solutions serving a diverse set of attractive niche markets with annual sales over $7.0 billion. AMETEK is committed to making a safer, sustainable, and more productive world a reality. We use differentiated technology solutions to solve our customers' most complex challenges. We employ 21,000 colleagues, in 35 countries, that are grounded by our core values: Ethics and Integrity, Respect for the Individual, Inclusion, Teamwork, and Social Responsibility. AMETEK (NYSE:AME) is a component of the S&P 500. Visit ************** for more information. We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. Individuals who need a reasonable accommodation because of a disability for any part of the employment process should call 1 (866) ###-####. Nearest Major Market: Long Island Nearest Secondary Market: New York City

The Fabrication | Artisan is a skilled member of the foundry team responsible for contributing to the construction, assembly, and finishing of sculptural works. This role requires intermediate-level proficiency in welding, metal shaping, and structural fabrication. The Fabrication | Artisan works both independently and collaboratively, supporting senior experts while also guiding apprentices through foundational tasks. This position bridges the gap between apprentice and expert, ensuring the quality and craftsmanship of fabricated components that bring artwork to life. Our Fabrication department engages in a wide range of tasks, including fitting, welding, drilling, tapping, and grinding. Whether working on scaffolds, ladders, or on the floor, we employ a variety of skill sets, with welding being just one part of the expertise we utilize in the creation of our artwork. Key responsibilities Executive intermediate-level fabrication tasks including cutting, welding (MIG, TIG and stick), grinding, and forming metal components. Machining and welding of various metals (mild steel, stainless, aluminum, bronze). Assemble and reinforcing artworks of various sizes and metals. Read and interpret technical drawings, measurements and layouts with accuracy. Troubleshoot and problem-solve fabrication challenges. Work independently on assigned projects while collaborating with the Fabrication Team to meet deadlines. Maintain fabrication equipment, tools, and shop cleanliness. Assist with staging and installation of artwork. Uphold foundry safety standards and contribute to a respectful, collaborative workshop culture. Requirements Minimum of 5 years of metal fabrication, welding, including MIG, TIG, and Arc welding; prior art foundry experience preferred. Experience with hand tools, vertical/horizontal saws, plasma, and torch cutting Experience with rollers, press brake, and pipe bender a plus Experience operating jib cranes or forklifts a plus Experience reading and executing shop drawings with minimal tolerances Other metal finishing & fabrication experience a plus Strong teamwork, communication, and problem solving skills with an ability to work under pressure Physical ability to lift, move, and work with heavy materials and equipment An appreciation for the art world would serve you well in this position Physical Requirements Industrial workshop environment with exposure to fumes, dust, and chemicals. Must be able to wear a respirator and other required personal protective equipment (PPE) for extended periods, including respirators, gloves, and protective gear. Must be able to stand, bend, stoop, reach, and crouch for extended periods of time. Ability to lift, carry, push, and pull up to 50 pounds regularly. Frequent use of hands and arms for use of handling tools and materials. Must have good hand-eye coordination and manual dexterity for detailed work. Ability to work in confined spaces and maintain awkward positions for short periods. Must be able to go up and down ladders and work with power tools while on ladder. Tolerance to working in environments with strong odors, fumes, and varying temperatures (with proper protective equipment provided). Visual acuity to detect color variations, finish flaws, and surface imperfections. Hearing ability to perceive safety signals, equipment sounds, and verbal instructions. Benefits Competitive salary based on experience and qualifications. Medical, dental, and vision insurance. Flexible spending accounts (medical and dependent care). Commuter and transit benefits. 401(k) retirement plan with 4% company match. Company-paid short-term and long-term disability and life insurance. Paid holidays, PTO, and sick leave. Opportunities for professional growth and advancement. We offer a vibrant, creative environment with great teammates. Opportunities to work on exciting, high-profile projects. Salary Range $25.77/hr - $30.70/hr UAP Productions LLC is an Equal Opportunity Employer. We are committed to fostering a diverse and inclusive workplace and strictly prohibit discrimination or harassment of any kind. Employment decisions are made without regard to race, color, religion, sex, sexual orientation, gender identity or expression, national origin, disability, genetic information, pregnancy, or any other characteristic protected by federal, state, or local law. All employment opportunities are based on qualifications, merit, and the needs of the business.

Xylem is a Fortune 500 global water solutions company dedicated to advancing sustainable impact and empowering the people who make water work every day. As a leading water technology company with 23,000 employees operating in over 150 countries, Xylem is at the forefront of addressing the world's most critical water challenges. We invite passionate individuals to join our team, dedicated to exceeding customer expectations through innovative and sustainable solutions. To perform the job successfully, an individual must be able to perform each essential duty satisfactorily. Receives instructions, interprets requirements and performs operations required to build quality product. Instructions may be provided verbally or through checklists, drawings, routings, procedures, etc. Perform work requiring a thorough knowledge of practices and techniques, principle of application and operation of various types of equipment, machines, tools, fixtures and instruments. Efficiently operate robotic weld machine, maintaining schedule adherence and required level of quality. Capable of determining operational problems affecting robot performance. Informs supervisor of any problems affecting machine performance. Perform minor robot program adjustments as required to assure equipment performs at optimum level. Plans and carries out all the tasks related to assembling, welding, testing, and prepping for paint and shipment any assigned product. Interprets and utilizes the required procedure employing the correct filler material, gas (type and volume), amperage, voltage, interpass temperature and all other parameters as designated within that procedure. Maintains required set up joint tolerances and final unit dimensional and orientation tolerances. Identifies parts with contract, model number, heat number, part number or other markings as directed. Verifies all material used is correct (quality, type, etc.) prior to the start of work. Obtains material, fixtures and tools necessary to perform assigned duties. Rig and operate crane, forklift truck, handcart, etc. to move position parts and/or units within or between departments. Pre cleans and post cleans work by grinding, sanding, chipping or other suitable means to ensure final product meets all code, procedure and/or drawing requirements. Ensures tank cleanliness per specification, customer requirement and/or procedure prior to releasing to paint/packaging. Prepares and mounts nameplates to units. Preps tank as required prior to painting. Enter clock number, heat numbers or other required data on paperwork (router, checklist, activity log, etc.) or electronic data system collection device per procedure or as directed to indicate operator has inspected his/her work and it conforms to the applicable fabrication and test requirements (drawings, specs, etc.) and to maintain record of fabrication/workcenter output and issues. Responsible for maintaining qualifications by utilizing the weld/braze processes at the appropriate time intervals. Verify all gauges and measuring tools are within proper calibration dates. Lubricate and clean tools/equipment daily. Perform daily safety checks on power vehicles, cranes, etc and record findings on checkoff sheets. Observe all safety and shop rules. Immediately notify supervisor of any unsafe conditions. Wears, cleans and properly maintains all required personal protective equipment (PPE). Participates in personal air and noise sampling when directed. Place inventory in its proper location, reporting any shortages or other inventory issues to the department supervisor. Each person is responsible for the quality of work and inspection, checking to insure that all product or pieces meet specifications and quantities without deviation and report any such deviations. Assists and/or trains new employees in job classification. Maintain required level of housekeeping and safe environment throughout work area(s), sweeps area(s), clears debris, arranges product, etc. on a daily basis to assure this. Immediately notifies supervisor of any unsafe conditions or work related injury. Perform 5S activities. Join the global Xylem team to be a part of innovative technology solutions transforming water usage, conservation, and re-use. Our products impact public utilities, industrial sectors, residential areas, and commercial buildings, with a commitment to providing smart metering, network technologies, and advanced analytics for water, electric, and gas utilities. Partner with us in creating a world where water challenges are met with ingenuity and dedication; where we recognize the power of inclusion and belonging in driving innovation and allowing us to compete more effectively around the world. At Xylem, you'll not only contribute to solving water issues but also have the chance to make a difference through our paid Volunteer Program, Xylem Watermark. We prioritize our employees' well-being through inclusion and belonging as well as our Employee Resource Groups (ERG). Proud to be an Equal Employment Opportunity (including disability and veterans) and Affirmative Action workplace, Xylem fosters an inclusive environment free from discrimination or harassment. Please note that the information in this outlines the general nature of the position and is not an exhaustive list of duties. Xylem is dedicated to providing reasonable accommodations to enable all employees to perform their essential job functions. We reserve the right to modify this job description and assign additional duties as needed. Embrace the opportunity to be part of Xylem's transformative journey in shaping the future of water technology! #XylemCareers #GlobalImpact #WaterInnovation

TopView Sightseeing is a New York City-based company offering a variety of sightseeing bus tours. We own and manage the portfolio of brands, including TopView Sightseeing, Event Cruises NYC, Liberty Cruise, Bike Rental Central Park, and Attraction Pass. TopView Sightseeing serves over 500k customers annually, creating unforgettable experiences for New Yorkers and visitors. Join TopView Sightseeing as a Metal Fabricator in Ridgewood, Queens! About the Role: As a Metal Fabricator, you will play a crucial role in the construction of our new fleet of sightseeing buses. You will utilize your expertise in metal fabrication, including welding and assembly techniques, to contribute to exciting and innovative projects. Responsibilities: Fabricate, assemble, and install sheet metal products. Light welding: MIG and stick welding as required. Operate fabricating machines: Cutting, bending, straightening, and shaping metal. Perform various metalworking tasks: Riveting, drilling, gluing, grinding, and joint preparation. Maintain a clean and safe workspace. Contribute to a positive and collaborative team environment. Qualifications: 1+ years of experience in metal fabrication Experience with aluminum and steel fabrication Proficiency in using various power tools Ability to lift up to 50 lbs. Ability to pass a pre-employment drug screen MIG welding experience (preferred) Bilingual (English/Spanish) (preferred) Benefits: Competitive Pay: $20.00 - $22.00 per hour Excellent Benefits: Health, dental, vision insurance Union Membership: Join TWU Local 100 after 90 days Paid Time Off Employee Discount Schedule: 8-hour shifts: 5:30 AM - 2:30 PM (Monday-Friday) or Tuesday-Saturday Weekends as needed

Performs all position welding on an assortment of structures and weldments in accordance with code requirement, alignments and dimensional specifications. Requires a broad knowledge of welding technology in addition to extensive welding experience, fulfills ASME section IX welding qualifications. Reports directly to Production Supervisor, Weld Shop or his/her designate. Skills: To perform the job successfully, an individual should demonstrate the following competencies: 1. Ability and willingness to abide by set policies and/or safety programs established by GHM, our clients, and/or regulatory agencies which govern our performance and behavior in the normal course of our work while on GHM or the client's property or job site. 2. Strong organization and time management skills. 3. High attention to detail. 4. Demonstrate behavior consistent with company values. 5. Ability to work independently, with minimal direction as a highly motivated self-starter and within a team oriented culture. 6. Exhibits polite and professional communication via phone, e-mail and mail. 7. Follows instructions, responds to management direction; takes responsibility for own actions; keeps commitments; commits to long hours of work when necessary to reach goals; completes tasks on time or notifies appropriate person with an alternate plan. 8. Maintain a collaborative relationship with internal and external stakeholders. 9. Obtains support and cooperation from others and reciprocates; demonstrates positive behaviors, displaying tact, respect, and understanding when dealing with others; proactively engages and confronts issues to achieve continual improvement. 10. Meets challenges with resourcefulness, generates suggestions for improving work; develops innovative approaches and ideas; presents ideas and information in a manner that gets others attention. 11. Demonstrates pride in workmanship and commitment to continual quality improvement; maintains clean, organized work area; maintains accurate and timely labor reporting; makes improvement based on lessons learned; maintains strict adherence to quality system requirements. 12. Ability to add, subtract, multiply, divide in all units of measure, using whole numbers, common fractions, and decimals. 13. Ability to thrive in a team environment. Physical and Mental Demands: The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of the position. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Physical demands: While performing the duties of this position, the incumbent is primarily required to sit, stand, walk, stoop, and bend. Required to speak and communicate clearly with others. Corrected vision to 20/20 or adequate and ability to identify and distinguish colors. • Mental demands: While performing the duties of this position, the incumbent is required to read, write, analyze data and reports, exercise judgment, develop plans, procedures and goals, present information to others and work under pressure. • Work Environment: While performing the duties of this position, the incumbent is also exposed to high level of manufacturing and equipment noise. Duties are performed indoors in a manufacturing environment with temperature changes. Exposure to hazardous materials, fumes or airborne particles and moving mechanical parts with vibration. Requirements Qualifications: To qualify for this position, an individual must possess the knowledge, training, experience and abilities required. Education and Training: • Technical Trades School in Welding • High school GED Required Experience: • 1+ years of welding experience. Other: • Must be willing to work overtime as required. • Minimal travel may be required Work Authorization: Must be able to work in the U.S without sponsorship.

General Responsibilities: Responsibilities include Gas Tungsten Arc Welding (GTAW). Welders are required to meet certification to AWS D17.1 for Aerospace Welding for compliance to NADCAP (National Aerospace Defense Contractors Accreditation Program). Ability to read engineering drawings and apply to job duties. Organize and perform the welding independently and complete all necessary documents. Perform mechanical sections for determining weld quality. Comply with the safety requirements of the department and company. Perform weld qualification to AWS D17.1 Perform welding to Engineering Process Specifications (EPS). Responsible for production assembly of components, fitting, and/or adjustment of interrelated parts. Qualifications: AWS D17.1 Fusion Welding for Aerospace Applications (desired) Able to read simple drawings: use scale, calipers and simple measuring instruments. Knowledge acquired through experience in assembly work. Work requires assembly of a wide variety of regular and special purpose parts. Considerable judgment and decisions is needed to follow clearly defined standard work procedures and practices. Education and Training High School diploma or GED Experience 1 - 3 years welding or manufacturing experience preferred but not necessary. Compensation: $17.00 - $22.00 per hour based on experience GW Lisk is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

Interpret drawings, process sheets, shop orders and specifications to determine methods and techniques to be applied. • Set up and operate arc and acetylene equipment, spot welding machine, hand and machine burning equipment and other related equipment to perform production operations. • Set up and operate welding equipment. Set current, amperage, gas pressures and regulate time and pressure controls. Select rod, wire, tips, electrodes for specific job at hand. Adjust and control wire feed. • Position burners and adjust for height and heat. Position and secure work on table, plate, fixture, power positioner with clamps, stops or other holding devices. • Fit and position parts in accordance with drawing specifications. • Tack weld as necessary. Check and inspect for adherence to dimensional tolerances. • Perform pre-weld operations such as drill holes on a drill press or straightening parts on a straightening press • Maintain equipment and work area. Clean, calibrate, and perform routine maintenance on welding tools and machinery • Inspect and test welds for quality and compliance. Use visual inspection and tools (e.g., calipers, gauges) to ensure welds meet standards and tolerances. Skills: • Strong teamwork and collaboration skills. • Willingness to assist others. • Attention to detail and accuracy. • Effective communication skills. Qualifications: • High School Diploma or equivalent. • Valid welding certification (e.g., AWS Certified Welder) • Proficiency in MIG welding techniques (experience with Flux-Core/Innershield a plus) • Ability to read and interpret blueprints, schematics, and welding symbols • Familiarity with welding codes and standards (e.g., AWS D1.1, ASME, API) • Basic fabrication and metalworking skills • Ability to lift up to 50 lbs and work in physically demanding environments • Ability to work with forklift and overhead crane • Basic math skills for measuring and calculating dimensions • Basic knowledge of GD&T

Looking for highly motivated individuals with experience in sheet metal fabrication, sheet metal bending using manual break, manual pan brake, shear machine, press etc. MUST have 5 years of proven experience. Candidate must have technical background Understanding basic electrical and plumbing is a plus! Clean driver's license Full Time position with good salary and benefits. Please submit a resume. We will consider a shop helper as well, must be handy with skill to operate tools. Master Chef Mobile Kitchens inc is a subsidiary of Mobility Services Inc. who's been in business for over 30 years, Master Chef Mobile Kitchens Inc. specializes in manufacturing innovative custom food trucks & kitchen trailers. As well as custom fabrication of, shipping container kitchens, marketing and promotion trucks and trailers, mobile office trucks, and much more 10 Years in business and fast-growing operation recently relocated to Nassau County Long Island. (Spanish Version) Se busca una persona altamente motivada con experiencia en la fabricación de chapa, doblado de chapa con rotura manual, rotura manual de bandeja, cizalla, prensa, etc. DEBE tener 3-5 años de experiencia probada. El candidato debe tener experiencia técnica ¡Entender los conceptos básicos de electricidad y plomería es una ventaja! Licencia de conducir limpia Puesto de jornada completa con buen sueldo y prestaciones. Envíe su currículum. Ayudante de tienda: debe ser hábil con habilidad para operar herramientas. Master Chef Mobile Kitchens inc. es una subsidiaria de Mobility Services Inc. que ha estado en el negocio por más de 30 años, Master Chef Mobile Kitchens Inc. se especializa en la fabricación de innovadores camiones de comida personalizados y remolques de cocina. Además de la fabricación personalizada de cocinas de contenedores de envío, camiones y remolques de marketing y promoción, camiones de oficina móviles y mucho más 10 años en el negocio y operación de rápido crecimiento recientemente reubicados en el condado de Nassau Long Island.

WELDER'S HELPER Gas Field Specialists, Inc. is an independent gas service company with offices located in New York and Pennsylvania. Exemplary customer relationships drive our growth and prosperity. GFS is committed to working safely, having pride and integrity in all aspects of our work, and respecting all coworkers and customers. By doing so, GOAL ZERO becomes attainable. The honesty, intelligence and commitment of our people are vital to GFS's mission. We share pride in the Company and respect each individual's contribution at every level. POSITION SUMMARY Assist welders in securing components together to ensure accurate welds that do not change the measurements of the component and will be able to withstand various types of steam, hot water, gases, lubrication, sprinkling, and industrial processing systems. PRINCIPLE RESPONSIBILITIES/ ACCOUNTABILITY • Assists in securing components together applying knowledge of geometry, physical properties of metal machining weld shrinkage, and welding techniques. • Assists in the selection appropriate equipment and plan the layout and assembly of a welding process. • Have basic knowledge of geometry, physical properties of metal machining weld shrinkage and welding techniques. • Prepares necessary supplies, tools and other equipment for transport to worksite. • Prepares and performs construction on site to eliminate and prevent possible hazards. • Pre-inspects, operates, and respects company equipment and tools. • Handles pipe, pipe fittings, hoses, and small tools. Stocks necessary materials as required. • Fabricates, assembles or disassembles manufactured products by hand. • Identifies objects, actions, and events that occur to promote safety. • Performs general physical activities, such as climb stairs, move or place heavy objects, lift/carry objects to be installed and removed. • Processes information such as categorizing, calculating, and verifying information or data. • Assists in securing of parts in position for welding. • Assists in the preparation of material for welding by cutting or grinding using pipe cutters, hammer and chisel, cutting torch, and/or grinder. • Sets material in stands, racks, hoists, etc. for welding. • Sets up equipment and weld parts using arc, gas-shielded arc, submerged arc or gas welding equipment. • Assist in the repairing of products by dismantling, straightening and reshaping. • Reassembles parts using cutting torch, straightening press and hand tools. • Follows oral and written directions. • Performs general physical activities, such as climb stairs, move or place heavy objects, lift/carry objects to be installed and removed. • Processes information such as categorizing, calculating, and verifying information or data. • Operates vehicles, mechanical devices, or equipment on and off sites, to include maneuvering, navigating equipment, forklifts, loaders, and trucks. • Performs for or working directly with other oil field employees and the public. • Operates small hand tools and provides other construction type labor in projects. • Performs other duties as assigned. KNOWLEDGE/SKILLS/ ABILITIES • One (1) to two (2) years of experience using construction tools and equipment including air hammer, concrete saw, patent scaffolding, trench digging equipment, etc. • Working knowledge of Oil and Gas Industry. • Ability to keep company proprietary information confidential. • Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. • Effective communication skills and the ability to work successfully with a wide variety of people at different levels within the organization. • Detail orientated with strong organizational skills. SPECIFIC EDUCATIONAL/ VOCATIONAL REQUIREMENTS • High school diploma or G.E.D. • Combination of education, experience and training may be substituted for these requirements LICENSE AND CERTIFICATION Valid Driver's License. ENVIRONMENT While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel. The employee frequently is required to stand, reach with hands and arms, and talk or hear. The employee is required to walk, stoop, or kneel. The employee must occasionally lift and/or move up to 100 pounds. The employee is occasionally exposed to moving mechanical parts and vehicles, and is regularly exposed to extreme heat or cold, or temperatures consistent with outdoor weather. ORGANIZATIONAL RELATIONSHIPS Department: Construction/Pre-Fabrication/Production, or as assigned Reports to: Foreman/ Superintendent, or as assigned Supervises: N/A Disclaimer The above statements are only intended to represent the essential job functions and general nature of the work being performed and are not exhaustive of the tasks that an employee may be required to perform. The employer reserves the right to revise this job description at any time and to require employees to perform other tasks as circumstances or conditions of its business, competitive considerations, or the work environment change. Equal Opportunity Employer

Job Description Assembler/FabricatorStarting pay: $14.00/hour Hours: 7am - 3:30pm Monday - Friday / Overtime hours: 6am - 4pm with occasional Saturday Staffworks is seeking reliable Assemblers to join a well-established team What's in it for you?Staffworks associates are eligible for the following: Accrued Paid Sick Leave Referral Bonus Incentives Become eligible for Health Insurance* and More!! Assembler Details: Build and assembly fiberglass products (training provided), will also be a sprayer trainee Assembler Qualifications: Ability to use and read a tape measure Must have a willingness to learn Must be a team player, work well with others Good attendance We are an Equal Opportunity Employer and celebrate diversity at all levels of our organization. How to Apply: Apply online now for this great opportunity! Please visit www.staffworkscny.com Call today (315) 735-5050 INDITES

The James A. Staley Company is one of the leading manufacturers specializing in Aircraft Ground Support Test Equipment. Our company is located in Carmel, New York, approximately 60 miles north of New York City. All major airports are little more than a one hour drive away. The company was incorporated in June of 1976. It was formed by a group of talented individuals, lead by James Staley, that were employees of the recently disbanded American Avitron company. A leader in aviation ground support equipment at the time, American Avitron had an international marketing base with extensive military and commercial contracts such as building complete pneumatic facilities for Pan American Airways, Alitalia, Eastern Airlines, etc. Lear Siegler, American Avitron's parent company, decided to redirect its efforts and made the decision to break up the company. This re-organization lead to the formation of an independent firm, the James A. Staley Company, which dedicated itself to the design and production of high quality aircraft test equipment and facilities at reasonable prices. Recently completed construction has brought total plant floor area to over 17,000 square feet of manufacturing and office space. Job Description Manufacturer of Hydraulic, Electrical, Pneumatic, and Aircraft Engine test equipment, seeking Sheet Metal Fabricator/Mechanic to build and assemble custom cabinet frame test equipment. Follows blueprints, rough sketches or engineer drawings to shape metal accurately. This job would involve setting up and operating brake press, plasma table, hydraulic sheet metal shear, using basic hand tools as well as using measuring tools. Drawings for sheet metal are limited with information so candidate must be able to think outside the box. Qualifications Skills that would be required to know are as follows: • Great communication and decision making skills • Great math skills • Mechanical/organizational skills • Knowledge in welding Stainless, Steel, 2-5 years experience • Ability to read and interpret blueprints • Ability to lift over 50 pounds • Skilled in cutting and fabricating metal • Working knowledge of assembly and/or of sheet metal design manufacturing methods. • 5 years experience Additional Information Work may involve any of the following: • Setting up and operating shear, press brake and other fabricating machines to cut, bend, and drill metal; • Welding. • Drill, Tap Holes for screws, bolts • Grinding, debarring • Structural welding of cabinet frame work

Basic Qualifications: * High school diploma or GED equivalency. * 5 years GTAW (TIG) Welding experience. * Expert understanding of weld schedule and process sheet interpretation * Ability to critically assess weld drawings for accuracy * Ability to work effectively across all product lines. * Ability and willingness to obtain and maintain certifications required per department requirements. * Provide training and mentorship to less experienced new welders. * Must pass Visual Acuity exam. Essential Functions & Responsibilities: * Understand and apply principles of TIG welding. * Perform welding functions in an area and/or product line outside of your home department. * Perform set up of jigs and fixtures; Perform non-structural tack welds. * Perform secondary processing operations. * Maintain welding equipment torches, coolers, hoses, cables, and other equipment as needed. * Work in compliance to NADCAP requirements. * Must pass review for workmanship, procedure reviews, operator assessment, & refresher training. * Train other employees in area based on department and production needs. * Qualify new welds for process improvement and new product development. * Maintain open and effective communication with support functions; serve as a knowledge base for process improvement and new product development. * Lead team initiatives. * Take an active role in continuous improvement including but not limited to, Quick Fixes, 5S, Kaizen, Root Cause analysis, APPS, etc. * Frequent interaction with internal and/or external customers and support functions (i.e. - Planners, Engineering). * Exemplifies and coaches' others on the GE Behaviors. * Utilizes proper PPE, safety equipment and follows all safety procedures. * Other duties as assigned. Desired Qualifications: * 5+ years' experience in a manufacturing environment. * Transferrable TIG welding experience; strong mechanical aptitude * Strong mechanical aptitude * Experience to work effectively in a self-directed team environment. * Humble: respectful, receptive, agile, eager to learn. * Transparent: shares critical information, speaks with candor, contributes constructively * Focused: quick learner, strategically prioritizes work, committed * Leadership ability: strong communicator, decision-maker, collaborative. * Problem-solver: analytical-minded, challenges existing processes, critical thinker * Ability to use Microsoft applications to analyze data (i.e. -Word, Excel, Oracle, etc.). Physical Demands: * Ability to continuously use hands and fingers in repetition and sit * Ability to occasionally bend, stoop, twist, crouch, squat, climb, and/or balance. * Ability to occasionally lift up to 20lbs; ability to push/pull up to 20 - 25 lbs. * All job descriptions are subject to change. The pay for this position is $30.50/hr.. This position is also eligible for an annual discretionary bonus based on a percentage of your base salary/ commission based on the plan. This posting is expected to close on 2/28/26. Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach, a 24/7 nurse-based resource; and access to the Employee Assistance Program, providing 24/7 confidential assessment, counseling, and referral services. Retirement benefits include the GE Retirement Savings Plan, a tax-advantaged 401(k) savings opportunity with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. General Electric Company, Ropcor, Inc., their successors, and in some cases their affiliates, each sponsor certain employee benefit plans or programs (i.e., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace, or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. If you are a qualified individual with a disability or a disabled veteran, you have the right to request a reasonable accommodation for purposes of participating in the application/hiring process with GE. If you are unable or limited in your ability to apply or interview as a result of your disability, you can request reasonable accommodations by emailing us at accommodation.mailbox@ge.com. Any offer of employment is conditioned upon the successful completion of a background check and drug screen (as applicable) This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3)). Additional Information GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: No

This is your opportunity to obtain a dynamic and rewarding career at the Philips Latham, New York site where magnetic resonance imaging magnets are manufactured. Your role: Completing high quality TIG and MIG welds and using precision instruments. Cutting, bending, drilling, tapping, and similar operations as required to fabricate intricate assemblies encountered in cryogenic applications. Reading and understanding drawings and supporting documents. You're the right fit if: You have 1+ years of welding experience as well as experience using mechanical assembly tools. You have a high school diploma or equivalent. You can create high quality TIG and Mig welds and you can perform excellent vacuum leak tight TIG welds on aluminum. You must be able to successfully perform the following minimum Physical, Cognitive and Environmental job requirements with or without accommodation for this Shipping/Warehousing position. You have experience operating bridge cranes and forklift trucks, and you are able to read and write to follow documentation assembly procedures and sign off documentation as required. How we work together We believe that we are better together than apart. For our office-based teams, this means working in-person at least 3 days per week. Onsite roles require full-time presence in the company's facilities. Field roles are most effectively done outside of the company's main facilities, generally at the customers' or suppliers' locations. This is an onsite role on 2nd shift. About Philips We are a health technology company. We built our entire company around the belief that every human matters, and we won't stop until everybody everywhere has access to the quality healthcare that we all deserve. Do the work of your life to help improve the lives of others. Learn more about our business. Discover our rich and exciting history. Learn more about our purpose. Learn more about our culture. Philips Transparency Details The pay range for this position in New York is $18.10 to $28.96 per hour plus overtime eligible and 2nd shift pay differential. The actual base pay offered may vary within the posted ranges depending on multiple factors including job-related knowledge/skills, experience, business needs, geographical location, and internal equity. In addition, other compensation, such as an annual incentive bonus, sales commission or long-term incentives may be offered. Employees are eligible to participate in our comprehensive Philips Total Rewards benefits program, which includes a generous PTO, 401k (up to 7% match), HSA (with company contribution), stock purchase plan, education reimbursement and much more. Details about our benefits can be found here. At Philips, it is not typical for an individual to be hired at or near the top end of the range for their role and compensation decisions are dependent upon the facts and circumstances of each case. Additional Information US work authorization is a precondition of employment. The company will not consider candidates who require sponsorship for a work-authorized visa, now or in the future. Company relocation benefits will not be provided for this position. For this position, you must reside in or within commuting distance to Latham, NY. USA #EOS This requisition is expected to stay active for 45 days but may close earlier if a successful candidate is selected or business necessity dictates. Interested candidates are encouraged to apply as soon as possible to ensure consideration. Philips is an Equal Employment and Opportunity Employer including Disability/Vets and maintains a drug-free workplace.

Job Description TopView Sightseeing is a New York City-based company offering a variety of sightseeing bus tours. We own and manage the portfolio of brands, including TopView Sightseeing, Event Cruises NYC, Liberty Cruise, Bike Rental Central Park, and Attraction Pass. TopView Sightseeing serves over 500k customers annually, creating unforgettable experiences for New Yorkers and visitors. Join TopView Sightseeing as a Metal Fabricator in Ridgewood, Queens! About the Role: As a Metal Fabricator, you will play a crucial role in the construction of our new fleet of sightseeing buses. You will utilize your expertise in metal fabrication, including welding and assembly techniques, to contribute to exciting and innovative projects. Responsibilities: Fabricate, assemble, and install sheet metal products. Light welding: MIG and stick welding as required. Operate fabricating machines: Cutting, bending, straightening, and shaping metal. Perform various metalworking tasks: Riveting, drilling, gluing, grinding, and joint preparation. Maintain a clean and safe workspace. Contribute to a positive and collaborative team environment. Qualifications: 1+ years of experience in metal fabrication Experience with aluminum and steel fabrication Proficiency in using various power tools Ability to lift up to 50 lbs. Ability to pass a pre-employment drug screen MIG welding experience (preferred) Bilingual (English/Spanish) (preferred) Benefits: Competitive Pay: $20.00 - $22.00 per hour Excellent Benefits: Health, dental, vision insurance Union Membership: Join TWU Local 100 after 90 days Paid Time Off Employee Discount Schedule: 8-hour shifts: 5:30 AM - 2:30 PM (Monday-Friday) or Tuesday-Saturday Weekends as needed Powered by JazzHR TFNj6sevjw

Job Description Looking for highly motivated individuals with experience in sheet metal fabrication, sheet metal bending using manual break, manual pan brake, shear machine, press etc. MUST have 5 years of proven experience. Candidate must have technical background Understanding basic electrical and plumbing is a plus! Clean driver's license Full Time position with good salary and benefits. Please submit a resume. We will consider a shop helper as well, must be handy with skill to operate tools. Master Chef Mobile Kitchens inc is a subsidiary of Mobility Services Inc. who's been in business for over 30 years, Master Chef Mobile Kitchens Inc. specializes in manufacturing innovative custom food trucks & kitchen trailers. As well as custom fabrication of, shipping container kitchens, marketing and promotion trucks and trailers, mobile office trucks, and much more 10 Years in business and fast-growing operation recently relocated to Nassau County Long Island. (Spanish Version) Se busca una persona altamente motivada con experiencia en la fabricación de chapa, doblado de chapa con rotura manual, rotura manual de bandeja, cizalla, prensa, etc. DEBE tener 3-5 años de experiencia probada. El candidato debe tener experiencia técnica ¡Entender los conceptos básicos de electricidad y plomería es una ventaja! Licencia de conducir limpia Puesto de jornada completa con buen sueldo y prestaciones. Envíe su currículum. Ayudante de tienda: debe ser hábil con habilidad para operar herramientas. Master Chef Mobile Kitchens inc. es una subsidiaria de Mobility Services Inc. que ha estado en el negocio por más de 30 años, Master Chef Mobile Kitchens Inc. se especializa en la fabricación de innovadores camiones de comida personalizados y remolques de cocina. Además de la fabricación personalizada de cocinas de contenedores de envío, camiones y remolques de marketing y promoción, camiones de oficina móviles y mucho más 10 años en el negocio y operación de rápido crecimiento recientemente reubicados en el condado de Nassau Long Island. Powered by JazzHR KvOuOrZT2j

WELDER'S HELPER Gas Field Specialists, Inc. is an independent gas service company with offices located in New York and Pennsylvania. Exemplary customer relationships drive our growth and prosperity. GFS is committed to working safely, having pride and integrity in all aspects of our work, and respecting all coworkers and customers. By doing so, GOAL ZERO becomes attainable. The honesty, intelligence and commitment of our people are vital to GFS's mission. We share pride in the Company and respect each individual's contribution at every level. POSITION SUMMARY Assist welders in securing components together to ensure accurate welds that do not change the measurements of the component and will be able to withstand various types of steam, hot water, gases, lubrication, sprinkling, and industrial processing systems. PRINCIPLE RESPONSIBILITIES/ ACCOUNTABILITY • Assists in securing components together applying knowledge of geometry, physical properties of metal machining weld shrinkage, and welding techniques. • Assists in the selection appropriate equipment and plan the layout and assembly of a welding process. • Have basic knowledge of geometry, physical properties of metal machining weld shrinkage and welding techniques. • Prepares necessary supplies, tools and other equipment for transport to worksite. • Prepares and performs construction on site to eliminate and prevent possible hazards. • Pre-inspects, operates, and respects company equipment and tools. • Handles pipe, pipe fittings, hoses, and small tools. Stocks necessary materials as required. • Fabricates, assembles or disassembles manufactured products by hand. • Identifies objects, actions, and events that occur to promote safety. • Performs general physical activities, such as climb stairs, move or place heavy objects, lift/carry objects to be installed and removed. • Processes information such as categorizing, calculating, and verifying information or data. • Assists in securing of parts in position for welding. • Assists in the preparation of material for welding by cutting or grinding using pipe cutters, hammer and chisel, cutting torch, and/or grinder. • Sets material in stands, racks, hoists, etc. for welding. • Sets up equipment and weld parts using arc, gas-shielded arc, submerged arc or gas welding equipment. • Assist in the repairing of products by dismantling, straightening and reshaping. • Reassembles parts using cutting torch, straightening press and hand tools. • Follows oral and written directions. • Performs general physical activities, such as climb stairs, move or place heavy objects, lift/carry objects to be installed and removed. • Processes information such as categorizing, calculating, and verifying information or data. • Operates vehicles, mechanical devices, or equipment on and off sites, to include maneuvering, navigating equipment, forklifts, loaders, and trucks. • Performs for or working directly with other oil field employees and the public. • Operates small hand tools and provides other construction type labor in projects. • Performs other duties as assigned. KNOWLEDGE/SKILLS/ ABILITIES • One (1) to two (2) years of experience using construction tools and equipment including air hammer, concrete saw, patent scaffolding, trench digging equipment, etc. • Working knowledge of Oil and Gas Industry. • Ability to keep company proprietary information confidential. • Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. • Effective communication skills and the ability to work successfully with a wide variety of people at different levels within the organization. • Detail orientated with strong organizational skills. SPECIFIC EDUCATIONAL/ VOCATIONAL REQUIREMENTS • High school diploma or G.E.D. • Combination of education, experience and training may be substituted for these requirements LICENSE AND CERTIFICATION Valid Driver's License. ENVIRONMENT While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel. The employee frequently is required to stand, reach with hands and arms, and talk or hear. The employee is required to walk, stoop, or kneel. The employee must occasionally lift and/or move up to 100 pounds. The employee is occasionally exposed to moving mechanical parts and vehicles, and is regularly exposed to extreme heat or cold, or temperatures consistent with outdoor weather. ORGANIZATIONAL RELATIONSHIPS Department: Construction/Pre-Fabrication/Production, or as assigned Reports to: Foreman/ Superintendent, or as assigned Supervises: N/A Disclaimer The above statements are only intended to represent the essential job functions and general nature of the work being performed and are not exhaustive of the tasks that an employee may be required to perform. The employer reserves the right to revise this job description at any time and to require employees to perform other tasks as circumstances or conditions of its business, competitive considerations, or the work environment change. Equal Opportunity Employer

The James A. Staley Company is one of the leading manufacturers specializing in Aircraft Ground Support Test Equipment. Our company is located in Carmel, New York, approximately 60 miles north of New York City. All major airports are little more than a one hour drive away. The company was incorporated in June of 1976. It was formed by a group of talented individuals, lead by James Staley, that were employees of the recently disbanded American Avitron company. A leader in aviation ground support equipment at the time, American Avitron had an international marketing base with extensive military and commercial contracts such as building complete pneumatic facilities for Pan American Airways, Alitalia, Eastern Airlines, etc. Lear Siegler, American Avitron's parent company, decided to redirect its efforts and made the decision to break up the company. This re-organization lead to the formation of an independent firm, the James A. Staley Company, which dedicated itself to the design and production of high quality aircraft test equipment and facilities at reasonable prices. Recently completed construction has brought total plant floor area to over 17,000 square feet of manufacturing and office space. Job Description Manufacturer of Hydraulic, Electrical, Pneumatic, and Aircraft Engine test equipment, seeking Sheet Metal Fabricator/Mechanic to build and assemble custom cabinet frame test equipment. Follows blueprints, rough sketches or engineer drawings to shape metal accurately. This job would involve setting up and operating brake press, plasma table, hydraulic sheet metal shear, using basic hand tools as well as using measuring tools. Drawings for sheet metal are limited with information so candidate must be able to think outside the box. Qualifications Skills that would be required to know are as follows: • Great communication and decision making skills • Great math skills • Mechanical/organizational skills • Knowledge in welding Stainless, Steel, 2-5 years experience • Ability to read and interpret blueprints • Ability to lift over 50 pounds • Skilled in cutting and fabricating metal • Working knowledge of assembly and/or of sheet metal design manufacturing methods. • 5 years experience Additional Information Work may involve any of the following: • Setting up and operating shear, press brake and other fabricating machines to cut, bend, and drill metal; • Welding. • Drill, Tap Holes for screws, bolts • Grinding, debarring • Structural welding of cabinet frame work

Basic Qualifications: * High School Diploma or GED equivalency. * 3 years welding experience. * Intermediate understanding of blueprint and process sheet interpretation. * Ability and willingness to use basic hand tools and measuring devices (verniers, micrometers, calipers, go-no go gauges, etc.) * Proficient in use of basic computer applications; Familiarity with weld and fusion principles. * Expert understanding of weld symbols and schedules.; Ability to pass visual acuity exam. * Willingness and ability to obtain certifications required for department. Essential Functions & Responsibilities: * Perform wire welding functions; Understand and apply basic principles of TIG welding. * Perform set up of jigs and fixtures; Perform non-structural tack welds * Perform secondary processing operations including sand blasting, wire brushing, and grinding. * Maintain welding equipment torches, coolers, hoses, cables, and other equipment as needed. * Work in compliance to NADCAP requirements, * Must pass review for workmanship, procedure reviews, operator assessment, & refresher training. * Possess the ability to perform welding functions in an area and/or product line outside of your home department. * Assist in new process development and troubleshooting of products. * Effectively & efficiently produce parts according to certification and quality guidelines * Frequent interaction with internal and/or external customers and support functions (i.e. - Planners, Engineering) outside of home department. * Train lower level employees, and work with limited supervision. Cross-train other employees as needed based upon knowledge and experience. * Compliantly complete all written and/or electronic labor tracking documentation. * Communicate with team to ensure all team members are aware of new processes and/or ideas. * Reports problems to appropriate resource and/or Coach. * Proactively work to improve efficiency and quality of products. * Participates in and support team initiatives. * Exemplifies and coaches' others on the GE Leadership behaviors * Utilizes proper PPE, safety equipment, and follow safety procedures per position requirements. * Understands and abides by the GE Leadership behaviors. * Other duties as be required. Desired Qualifications: * 3-5 years' experience in a manufacturing environment * Transferrable TIG welding experience; Strong mechanical aptitude. * Experience in a self-directed team environment. * Demonstrates ability to work effectively in a team environment. * Humble: respectful, receptive, agile, eager to learn. * Transparent: shares critical information, speaks with candor, contributes constructively * Focused: quick learner, strategically prioritizes work, committed * Leadership ability: strong communicator, decision-maker, collaborative. * Problem-solver: analytical-minded, challenges existing processes, critical thinker * Ability to use Microsoft applications to analyze data (i.e. -Word, Excel, Oracle, etc.). * Familiarity with 5S & lean manufacturing knowledge. Physical Demands: * Ability to continuously use hands and fingers in repetition. * Ability to occasionally bend, stoop, twist, crouch, squat, climb, and/or balance. * Ability to continuously sit; ability to occasionally lift to 20 lbs.; ability to push/pull up to 22 lbs. * All job descriptions are subject to change and/or updates. The pay for this position is $27.75/hour. This position is also eligible for an annual discretionary bonus based on a percentage of your base salary/ commission based on the plan. This posting is expected to close on 2/28/26. Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach, a 24/7 nurse-based resource; and access to the Employee Assistance Program, providing 24/7 confidential assessment, counseling, and referral services. Retirement benefits include the GE Retirement Savings Plan, a tax-advantaged 401(k) savings opportunity with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. General Electric Company, Ropcor, Inc., their successors, and in some cases their affiliates, each sponsor certain employee benefit plans or programs (i.e., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace, or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. If you are a qualified individual with a disability or a disabled veteran, you have the right to request a reasonable accommodation for purposes of participating in the application/hiring process with GE. If you are unable or limited in your ability to apply or interview as a result of your disability, you can request reasonable accommodations by emailing us at accommodation.mailbox@ge.com. Any offer of employment is conditioned upon the successful completion of a background check and drug screen (as applicable). This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3)). Additional Information GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: No