Industrial electrician jobs in Northlake, IL - 165 jobs

Day Shift: 6:00am-2:30pm Reporting to the Manufacturing Engineer, the Industrial Maintenance Tech will be responsible for shift support for all electrical/mechanical problems that might arise with equipment/facilities as well as completing all predictive and preventative maintenance work. This position would also be responsible for all machine management and maintenance across the fabrication department and would lead special projects to both equipment/facilities and systems development. Essential Duties and Responsibilities include the following, as well as other duties may be assigned. Follow all safe work practices and procedures. Wear all prescribed personal protective equipment. Ensure all proper lockout/tag out procedures are followed. Provide shift support for all electrical/mechanical and technical problems Install, maintain, remove, troubleshoot, and diagnose a wide variety of electrical/mechanical equipment and components used in manufacturing process. Troubleshoots, repairs, and maintains a variety of production machinery and equipment including electrical, mechanical, hydraulic, and pneumatic systems and parts. Installs, modifies, and relocates machinery and equipment and performs fabrication, welding, mechanical, electrical, electronics, plumbing, carpentry, or other maintenance skills. Repairs and modifies buildings and plant systems as required. Troubleshooting and repair of components such as rolls, shafts, bearings, drive belts, drive chains and gear boxes utilizing basic mechanics hand and power tools Troubleshooting and repair of pumps, valves, and piping systems to include installation of coper pipes or PVC pipes. Reads and interprets manuals, schematics, blueprints, drawings, and other written installation and repair instructions Identify and complete predictive and preventative maintenance work and weekly mechanical press inspections Machinery includes NC Turret Presses, Waterjet, Press Brakes, Routers, Welders, Drill Presses, and hand power tools. Manage backlog of work orders. Maintain Maintenance Area tools and equipment. Maintain and organize all toolboxes, workspaces, and maintenance specific equipment. Perform other duties as required to maintain or improve plant reliability. Conduct daily safety risk assessments on routine and non-routine job tasks. Lead systems development work such as standard work, training, and housekeeping initiatives throughout the plant. Travel: Minimal; less than 5% Qualifications & Experience: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. High School or GED education required (Diploma or GED). 3+ Years of Mechanical experience in an industrial environment. Bilingual in English and Spanish is preferred. Machining and fabrication experience. High level experience troubleshooting manufacturing equipment. Welding, machining, and fabrication skills. Demonstrated skill in working with conveyors, mechanical drive systems (gearboxes, sheaves, pulleys, belts, bearings, sprockets, and chains), pumps, hydraulics, and pneumatics. Ability to perform precision tasks including alignments using lasers, dial indicators, etc. Physical Demands The physical requirements described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to talk or hear. The employee is frequently required to stand; walk; use hands to finger, handle or feel; and reach with hands and arms. The employee is occasionally required to sit; climb or balance; and stoop, kneel, crouch or crawl. The employee must frequently lift and move up to 25 pounds and occasionally lift and move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Plant Environment This position operates in a manufacturing setting and can be subject to extreme cold and hot temperatures; uneven walking surfaces with cords, tools, and other obstacles; intermittent loud noises; and dusty or dirty conditions. Required PPE includes: Hard hat (when required), safety glasses, earplugs, steel toe/composite boots, cut sleeves/cut resistant gloves and fall protection. Education and/or Experience

Crown CAPP is seeking an experienced Industrial Electrician. This position will troubleshoot, repair, replace, maintain electrical/ systems for production related equipment and building utilities within a high-speed metal packaging manufacturing facility. This is an hourly position in high-speed, high-volume manufacturing environment where compliance to all safety policies, procedures and regulations is our way of doing business. We are looking for team-oriented individuals who are committed to customer quality, continuous improvement and achieving World Class Performance. Hourly Rate: $40.00/hr Primary Hours/Shift: 3rd Shift (10:00pm - 6:30am) Day to day responsibilities will include the following: Perform preventive maintenance inspections on production equipment as needed and assigned Assist in developing related preventive maintenance that do not currently exist. Troubleshoot of circuits as required to repair, adjust, calibrate, replace, modify electrical components and devices of production equipment. Knowledge of the requirements and use of Lockout Tagout. Knowledgeable of and conform to the requirements of NFPA70E, Arc Flash. Other duties as assigned. Job requirements: The successful candidate will possess the following skills and knowledge: High School Diploma or GED required. 5+ years of experience as a Maintenance/Industrial electrician in a manufacturing environment highly preferred. Experience troubleshooting and repairing of high-speed manufacturing equipment. Electrical, electronic, pneumatic & mechanical knowledge, comprehension, and skills Troubleshooting ability of AC/DC control circuits 120/240 VAC and 440 VAC single and three phase power circuits Knowledge of and ability to troubleshoot variable frequency drives, AB Power Flex 40, 525 & Control Techniques An understanding of ladder logic AB RS Logics 5, 500, & 5000 Knowledge of and ability to troubleshoot Programmable Logic Controllers (PLCs) - Allen Bradley PLC 5, SLC 500, Compact Logics Must be able to comprehend and comply with all OSHA and company safety and electrical regulations including Lock Out / Tag Out, and Arc Flash protection Use of hand tools, Multi-meters Analog & Digital, ammeters, amp probes Ability to read and understand manuals, prints and electrical schematics Good communication and basic computer skills Planning and organizing skills Physical requirements: Work from ladders, lifts, catwalks above floor level (4-10 feet); occasionally at ceiling height (20+ feet) Frequent standing, walking, climbing, reaching, bending, squatting, & reaching above shoulder level Pushing, pulling, and lifting requirements: 25+ pounds. Good Color vision Exposure to high levels of noise (hearing protection required in plant area)

Overview Industrial Electricians (Ideal for Navy EMN or ETN) These positions are an immediate need and require relocation to Fort Wayne, IN. (If you meet this criteria but prefer a different location, contact us to review additional opportunities.) Full-Time | $90,000-$100,000+ Total First Year Compensation | Career Opportunity with an Industry Leading Company Our client is seeking highly skilled Industrial Electricians to join their expanding team. This is an exceptional full-time career opportunity designed for candidates with a strong technical foundation, particularly those with U.S. Navy Nuclear Electrician (EMN) or Nuclear Electronics Technician (ETN) backgrounds. If you thrive in fast-paced environments, excel at troubleshooting complex systems, and want to grow with a company that values technical excellence, we want to meet you. Key Responsibilities Perform electrical maintenance, troubleshooting, and repair on industrial equipment and control systems. Work with PLC-based controls, instrumentation, sensors, and automated systems. Diagnose electrical and electronic faults using schematics, test equipment, and system knowledge. Support installation, calibration, and commissioning of new equipment. Maintain and update documentation, wiring diagrams, and maintenance logs. Collaborate with engineering, operations, and maintenance teams to ensure system reliability. Participate in on-site technical support, system upgrades, and continuous improvement initiatives. Ensure all work complies with safety, quality, and operational standards. Ideal Candidate Profile U.S. Navy Nuclear Electrician's Mate (EMN) or U.S. Navy Nuclear Electronics Technician (ETN) Strong background in electrical systems, controls, instrumentation, and troubleshooting. Experience working with high-reliability systems, technical procedures, and strict safety protocols. Ability to interpret electrical schematics, wiring diagrams, and technical manuals. Comfortable relocating for a long-term career opportunity. Strong analytical thinking, attention to detail, and problem-solving ability. Compensation & Benefits $90,000-$100,000 first-year compensation, depending on experience. Full benefits package (health, dental, vision, retirement). Significant long-term growth and advancement opportunities within a rapidly expanding organization.

Job Description As the on-site electrical expert, the Industrial Electrician provides advice and guidance to other staff members. This includes training new employees and imparting knowledge on electrical matters to those in lower mechanic levels. Responsibilities Carry out the prompt repair, replacement, and maintenance of electrical wiring and circuits on production equipment Continuously researches and evaluates new tools and technologies for diagnosing, repairing, and preventing electrical issues in equipment Prepares codes for electronic and electrical equipment, takes charge of the installation, care, and overhaul of electrical controls, wiring, and lighting networks Facilitates the installment of recent or revised equipment and checks for the optimal functioning of electrical parts Preserves correct electrical illustrations, whether they are in hard-copy or digital form Diagnose malfunctioning systems and components, using test equipment and hand tools, to locate the cause of a breakdown and correct the problem Inspect electrical systems, equipment, and components to identify hazards, defects, and the need for adjustment or repair, and to ensure compliance with codes Repair or replace wiring and equipment, using hand tools and power tools Assemble, install, test and maintain electrical or electronic wiring, equipment and fixtures using hand tools and power tools Requirements Qualified candidates must have 5+ years of relevant experience and have the demonstrated ability to troubleshoot, diagnose, and repair equipment & components including electrical, mechanical, and/or electronic with minimum supervision or assistance Basic computer skills with Microsoft windows operating environment for internet based work order system Test equipment operation including Digital multi-meters and Amp meters Electrical theory including basic /OHMs law application Basic mechanical skills with pneumatic and hydraulic systems Experience with AC/DC Drives and PLC's in a manufacturing facility 5 years of High-Voltage systems up to 480 Volt 3-phase power and 500 volt D-C, AC/DC Drives and PLC's in a manufacturing facility Electrical theory including basic ohms-law application with a wide range of technical and mechanical knowledge and skills, as well as basic mechanical skills with pneumatics and hydraulic systems Benefits Excellent benefit package including health, dental, life insurance, and short-term disability. 401K plan with employer match. Salary commensurate with experience Job Type: Full-time Benefits: Dental insurance Health insurance Life insurance Paid time off Vision insurance Ability to Commute: Bloomingdale, IL 60108 (Required) Work Location: In person Pay: starting at $40/hr

Job Description Aegis is currently partnering with a local manufacturing company in the Greater Chicago Area to identify a Industrial Electrician and thought that your experience could be a good fit! Why Should You Consider This Opportunity? - Opportunity to work in a tight knit, collaborative environment with alot of autonomy - Plenty of Overtime available - A historically stable company that is growing exponentially Requirements: - 3+ years of industrial electrician experience - Proficient with machine, PLC, and enclosure wiring - Capable of reading electrical schematics & Wiring diagrams - Strong troubleshooting skills with electrical systems- motors, drives, controls panels - Comfortable with high voltage Again,Ithoughtyouwouldbeagoodfit. If you are interested, please shoot over your resume to ******************** and your availability to connect! You should be proficient in: PLC Troubleshooting Skills Electrical Schematics PLC Programming Experience PLC Wiring Experience Conduit Bending

ELECTRICIAN The Industrial Electrician is responsible for the safe, efficient, and effective operation of equipment in VVF's operations. Basic Minimum Requirements: Must have five (5) years on-the-job experience as an industrial electrician. Experience in electrical troubleshooting, and installing and repairing pneumatic/electrical instrumentation, power distribution, and control/power wiring. Ability to read and interpret electrical schematics, and national electrical code. Experience working with AC/DC drives and motors, PLC's, sensors, and control devices. Experience with various Servo/Stepper/Custom drives systems as used on existing equipment. (Kinetics/Sercos/Lexium/Emerson Servos, Parker Stepper Drives, etc.) Experience with ethernet/RS232/RS485/Modbus+/DeviceNet communications to various equipment types in order to troubleshoot, diagnose, program and repair malfunctions. Experience working with mechanical components and systems, (motor, gearbox, bearing, driveshaft, sprockets, roller chains, etc.) Must have basic standard and metric hand tools (e.g. sockets, wrenches, pliers, channel locks, wire cutters). Ability to operate shop equipment: grinders, belt sanders, drill press, band saws, hydraulic press, electric drills, etc. Ability to work any shift, and overtime as required. Preferred Qualifications: Basic knowledge of a Computerized Maintenance Management System (CMMS). Ability to read and interpret drawings, hydraulic schematics and technical manuals. Ability to work with Production Personnel to implement minor operational changes in the various Control Systems through hardwiring and PLC programming. Ability to use the Internet to obtain manuals, information and remote support if required. Ability to program PLC's. Experience working with, and troubleshooting Programmable Logic Controllers (PLC's) (AB SLC500-ControlLogix/TI-505/Modicon Quantum-984). Experience working with Hydraulic Systems, Cylinders, Pumps, Valves, etc. Experience working with piping. Experience rebuilding and overhauling packaging equipment. Physical Requirements: Requires sufficient physical ability to walk, stand, sit, and climb stairs; to frequently bend, squat, crouch, kneel, twist, and make other movements in the performance of daily activities; grasping, handling/fingering and using hand tools; to reach above shoulders and outward, and lift, carry, push and/or pull moderate amounts of weight. Work is performed in an internal and external plant environment; confined space entry required; exposure to noise, dust, and odors; all types of weather and temperature conditions; frequently at heights. Key Responsibilities: Coordinates troubleshooting and correction procedure documentation for all electrical items and issues where possible. Includes updates of existing procedures and development of new procedures. Follows NEC and NFPA 70E electrical standards and takes corrective action with engineering on any systems that are found to be in violation of these standards. Assists in remote troubleshooting when VVF engineering assistance is required. Coordinates and verifies that proper documentation is provided in all completed work orders that detail the issue reported and the electrical troubleshooting and repair steps taken to correct them. Performs a wide variety of service work in one or more specialized maintenance area such as mechanical, electrical, hydraulics, or machine servicing. Installs new machines by installing conduit, wire and electrical equipment; using hand tools and test equipment. Repairs electrical systems and equipment by diagnosing malfunctioning electrical devices, determining faulty wiring; inspecting and testing. Maintains continuity among work teams by documenting and communicating actions, irregularities, and continuing needs. Performs general manual labor work. Performs all duties in a safe manner, utilizing safety practices and procedures required by VVF and applicable law (e.g. OSHA, etc.), personal protective equipment, and reporting procedures. Reviews all pertinent safety material before conducting new assignments. Monitors for, and reports unusual occurrences to management. Maintains all equipment and facilities in a clean, orderly and operating condition. Trains other employees as required. Completes work orders as required. Performs other duties and responsibilities as assigned by management. No task or duty is exclusive to a classification or skillset. An employee working in this classification is expected to perform various duties and tasks that traditionally may not have been assigned under a narrower job classification. Note: The above statements shall not be construed as a complete description of all the work requirements. VVF is an equal opportunity employer. We evaluate qualified applicants, without regard to race, color, religion, national origin, sex or gender, age, disability, veteran status, sexual orientation, gender identity or expression, genetic information, including the perception that a person has any of those characteristics or that the person is associated with a person who has, or is perceived to have, any of those characteristics, or any other consideration made unlawful by applicable law. VVF is committed to working with and providing reasonable accommodations to individuals with disabilities. If you need a reasonable accommodation because of a disability for any part of the employment process, please call Human Resources at ************** and let us know the nature of your request and your contact information.

WinCup is a food service packaging company focused on providing our customers and consumers the highest quality products allowing them to enjoy the beverages and foods they love, whether at home, or on the go. Trusted since 1962, WinCup is now a leading manufacturer passionately transitioning into an innovative, technology driven enterprise focused on creating superior products and brands directly addressing global plastic pollution. WinCup is driven by our Vio biodegradable foam technology, our Phade line of PHA based straws and stirrers which are the only Marine Biodegradable, Home and Industrial Compostable straws and stirrers in the world! We are passionately committed to the environment, excellence, innovation and growth. For additional information regarding WinCup and our ground-breaking and environmentally friendly products, check us out at ****************** ************************* ******************** We are a dynamic, diverse and inclusive team bound together by our shared Values of: One Team Performance Based; Rewards & Recognition Driven Excellence in All We Do Respectful and Engaged Leadership Always Do the Right Thing Here at WinCup we are proud to offer our valued, full-time Team Members a competitive, comprehensive compensation and benefits package with most benefit eligibility beginning just 31 days post hire, including medical, dental, vision and life insurance plans. We also offer paid time off (PTO) and holidays, short & long-term disability, and an Employee Assistance Plan (EAP). And, to top it off, we offer a 401(k) plan with a generous company match available after only 60 days of employment! Job Position: Plant Electrician Job Location: West Chicago, IL Reports to: Maintenance Supervisor Pay Range: $30-$40 JOB SUMMARY: Diagnoses and performs electrical and mechanical repairs on cup machines, inspectors, baggers, pre-expansion machines and conveyors along with repairing molds and performing change-over of molds. Plans layouts, installs and repairs wiring, electrical fixtures, apparatus and control equipment. Controls and automation, PLC programming, and 110 to 480 Volt. ESSENTIAL JOB FUNCTIONS: Diagnoses problems by inspecting and disassembling equipment to determine extent of repairs necessary. Performs electrical, mechanical, hydraulic, pneumatic and hydro repairs to the cup machines, inspectors, bagging machines, pre-expansion machines and conveyors. Uses drawings, diagrams, operational manuals, manufacturing specifications, etc., when diagnosing problems and making repairs. Repairs electrical components, cylinders valves, pumps, motors, cooling tower, piping, boilers conveyors, baggers, pre-expansion and cup machines. Test continuity of circuits to ensure electrical components are safe by testing with ohmmeter, batter and buzzer, oscilloscope. Measure, cut, bend, thread, assemble and install electrical conduit along with pulling the wiring. Install control and distribution apparatus such as switches, relays and circuit breaker panels Provides assistance to other Maintenance Mechanics while working on production machines and associated equipment. Notifies the Maintenance Lead about any needed repairs that are outside of their scope of responsibility or ability to repair. Perform work in a safe manner to include performing LOTO of equipment before making any repairs. Attend meeting and training session as required. Follow all GMP and sanitation guidelines along with maintaining a high level of personal hygiene. Adheres to all Good Manufacturing Practices (GMP), food safety, HACCP and SQF process requirements, and sanitation guidelines rectify and or report any and all non-compliance to leadership. Follows WinCup OPERA Values, safety initiatives, and other related plant standards. Perform other duties as assigned by the Shift Supervisor, Maintenance Lead or Maintenance Manager including special projects and working with outside vendors and contractors while on site. Performs all other duties as assigned. Competencies: Ability to follow directives with WCH leadership, managers, supervisors, in ensuring productivity and target levels are sustained. Ensures all company policies and procedures including manufacturing and safety policies and procedures are followed at all times. Collaboration with plant, safety, and leadership. Ability to complete mandated new manufacturing training on equipment to maximize output efficiencies. Supports all current and new product introductions. Education and Qualifications: High school diploma or GED. Four (4) years' experience in electrical maintenance in a manufacturing environment repairing production machines. Electrical and mechanical aptitude along with manual dexterity. Knowledge of 480 and 240/3-phase systems and 110 single phase. Must be able to speak, read and write English in order to complete job specific paperwork. Ability to work independently and function as a team member. Ability to obtain a forklift or powered industrial truck certification. Good planning and organizing skills. Must have own tools, volt-meter and amp probe (specialty tools provided by WinCup). Work mandatory overtime, early morning, late evenings and weekends when required during busy season, inventory, and for vacation coverage. Working Conditions: The characteristics listed below are representative of the work environment typically encountered by an individual while performing the essential duties of a position in our manufacturing plants. In-doors in a manufacturing and/or environment that is not air-conditioned. Exposure to extreme heat. Wear PPE while working which includes hairnet, hearing protection and safety glasses with side guards. May work 8 hour shift or 12 hour shift that begins at 6:50 a.m. for dayshift or a nightshift that begins 6:50 p.m. Required to work weekdays, weekends and overtime as needed. Subject to on-call activity to ensure equipment is functional. Physical Demands: The characteristics listed below are representative of the physical demands required by an individual to successfully perform the essential duties of a position in our manufacturing plants. Note that office positions located within our Manufacturing Plants often require some plant floor presence throughout the day so that while these demands may not always apply, they should still be noted. Work 8 or 12-hour shift while standing, walking, stooping, bending, reaching, grasping and lifting throughout the entire shift. Requires the manual movement of cases of finished goods and other objects such as bagger film that weight up to 40 pounds. 100% tobacco free workplace on all Company premises. Designated outside smoking area provided and must be followed. The list of job requirements above is not intended to be exhaustive or all-inclusive. The Company reserves the right to revise this as needed to comply with actual job requirements. WinCup reserves the right to revise or update this job description as needed to better comply with the actual essential function of the job requirements as business needs dictate. WinCup is an EEO/AA and E-Verify employer. At WinCup we are committed to building a diverse and inclusive workplace that embraces the diversity and strengths of our Team Members, our customers, and community. We welcome and consider applications from all qualified candidates, regardless of their race, gender, sexual orientation, religion, disability or any other protected characteristic. We firmly believe that a diverse organization creates opportunities for all individuals to showcase their talents, both independently and collaboratively. Diversity fuels our ability to be truly innovative by embodying our values, driving our success, and fostering an environment where every Team Member can thrive and perform at their very best. To ensure the safety of our team members in the workplace, we perform background and drug screenings. Thank you for considering WinCup and helping us make a difference!

Job DescriptionSalary: $32- $45 per hour, based on skills and experience. Dubak Electrical Maintenance Group is looking for Service Electriciansthat are tasked to respond to requests for isolated repairs and upgrades. They have skills troubleshooting wiring problems, installing wiring in existing buildings, and making repairs. Your job duties include inspecting and testing electrical components to diagnose problems, repairing broken electrical components, and installing updates for outdated electrical systems. You may work independently or with a partner, and you typically drive a truck or van with tools and materials to each job site. Must have Customer Service skills 5+ years previous Service Electrical experience Working knowledge of installing electrical systems Working knowledge of the NEC Ability to work independently Possession of electrical hand tools and test equipment Must hold a valid driver's license and a clean driving record. Must be willing to travel, work nights, weekends, and overtime. Willing and able to maintain strict adherence to safety rules and regulations Benefits: Competitive Salary Insurance (Health, Dental, Vision, Life, Short Term Disability, Long Term Disability, among many other voluntary benefit options) Paid Holidays Paid Time Off 401k and Profit Sharing Training Reimbursement Program Positive Work/Life Balance Opportunity for Advancement Dubak Electrical Group, LLC and its affiliates is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, creed, color, religion, national origin, ancestry, gender, gender identity, marital status, status with regard to public assistance, citizenship status, physical or mental disability, sexual orientation, membership or activity in a local commission, veteran status, age, or any other status protected by law. Experience: Service Electrical Journeyman: 5 years (Preferred) Industrial electrical experience Education: High school or equivalent (Preferred) Work authorization: United States (Required)

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. Plans layout and installs wiring, conduit and electrical equipment in buildings. Measures, cuts, bends, threads, assembles and installs electrical conduit. Troubleshoots Dematic conveying and ASRS systems. Supports project planning and equipment purchases. Installs power supply wiring and conduit for newly installed machines and equipment. Installs distribution and control devices such as circuit-breaker panels, switches, relays, etc. Uses electrical drawings and wiring diagrams and manufacturer instructions to diagnose malfunctioning devices such as transformers, motors and lighting fixtures and replaces damaged or broken components of building installations. Uses electrical drawings and wiring diagrams and manufacturer instructions to test malfunctioning machinery. Diagnoses and repairs or replaces faulty electronic components, such as printed circuit boards and faulty electrical components of machines such as relays, switches and motors, and positions sensing devices. Communicates with equipment manufacturer as needed. Supports maintenance in diagnosing and repairing faulty mechanical, hydraulic, and pneumatic components of machines and equipment. Serves as an electrical SME and ensures plant electrical activities are in compliance with all applicable electrical codes. Completes paperwork as required. Initiates purchase order requests for parts and supplies. In addition to Electrical, works on other aspects of engineering project installations including mechanical, pneumatic, hydraulic, etc. Supports the Facilities Maintenance team as needed. Completes other maintenance repair work as required and works in areas such as building maintenance. Actively participates in root cause analysis and other plant continuous improvement initiatives. Works closely with supervisors and cross-functional teams to identify trends and areas of improvement and implement and sustain continuous improvement initiatives that enhance safety, quality, equipment performance, and efficiency. Complies with safety and GMP requirements. SAFETY RESPONSIBILITY STATEMENT Supports a culture of safe production and exhibits safe work practices. Actively participates in the safety program by engaging in safety activities. Effectively provides and accepts constructive peer-to-peer feedback on safety performance. Adheres to policies, procedures, SOP's, safe work practices, and safety policies and procedures. Reports ALL workplace incidents to supervisor immediately. Communicates concerns to supervisor, reports hazards, and provides input on prevention. Properly uses, wears, and stores Personal Protective Equipment when required. Participates on safety teams and/or completes safety-related activities as part of regular job responsibilities. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations will be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE High school diploma or general education degree (GED); at least 10 years related electrical maintenance or electrician experience and/or training; or equivalent combination of education and experience. Electrical trade school/certification strongly preferred. Knowledge of AC power from 480 volts to 120 volts and DC power 12 to 24 required. Knowledge of control systems preferred. PERFORMANCE ABILITY Proven ability to Install and repair electrical systems, apparatus, and electrical and electronic components of industrial machinery and equipment of a complex nature. Demonstrated ability to consistently meet quality, safety and efficiency goals. Excellent problem-solving skills required. Good time management skills; ability to prioritize and calmly handle multiple tasks simultaneously in a fast-paced environment; demonstrate a strong sense of urgency; and flexibility to change tasks frequently and work in different areas of Maintenance and locations as business needs require. Strong teamwork and collaboration skills; ability to work and communicate effectively with others; strong attention to detail skills; excellent organizational skills; strong initiative to independently complete tasks accurately and on time; and demonstrated high quality of work. Consistently follows all company policies and procedures, including all safety policies and procedures. LANGUAGE SKILLS Ability to communicate professionally and effectively both verbally and in writing. Ability to read and comprehend instructions, correspondence, and memos such as safety rules, operating and maintenance instructions, and procedure manuals (S.O.P.). Ability to accurately and truthfully complete paperwork. Good communication and interpersonal skills. MATHEMATICAL SKILLS Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. REASONING ABILITY Ability to apply commonsense understanding to carry out instructions furnished in written, oral, or diagram form. Excellent problem-solving ability. OTHER SKILLS and ABILITES Basic computer skills required. Flexibility to work in other areas of Maintenance (i.e. Building maintenance) and at other locations (i.e. BLM 391, Roselle, Knollwood/Scott Drive Corporate) to support business needs. Ability to work off shifts and weekends and to travel to other facilities required. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms (including overhead), including reaching horizontally on a ladder; ascend and/or descend stairs (including ladders); stoop, kneel (including half kneel), crouch, and crawl; and talk and hear. Specific vision abilities required by this job include close vision, depth perception, and ability to adjust focus. The employee must regularly lift, move (in some cases drag items), slide, raise and/or place: Lift up to 60 lbs. from 31-inch shelf and carry for up to 5 ft. and then return 60 lbs. to 31-inch surface. Lift up to 60 lbs. floor to waist height. Push and pull 42 lb. force at 36 inches. Step on/off a 24-inch step. Grasp 50 lbs. of force. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee regularly works near moving mechanical parts. The employee is frequently exposed to herbal aromas, dust, and/or airborne particles, some classified as allergens or irritants. The employee occasionally works in high, precarious places and in outside weather conditions and is occasionally exposed to fumes, cold, and heat. This position works in all areas of NOW's manufacturing facilities with direct exposure to ingredients (powders and liquids), mixes (powders and liquids), equipment, and packaging. The noise level in the work environment is usually moderately loud, and in some areas where louder hearing protection is required. 2025 BENEFITS AT A GLANCE #hpnow

Mechanic/Electrician 3rd shift Pay Rate: $46.54/Hr + $0.26 Shift Differential Category/Shift: Hourly Full-Time (3 p.m. to 11 p.m. - Monday-Friday) Physical Location: Des Plaines Container 100 E. Oakton St. Des Plaines, IL The Job You Will Perform: Industrial maintenance/mechanic electrician will perform routine preventive maintenance and repair of machines. Troubleshoot emergency maintenance on machines as necessary to support plant operations. Troubleshoot industrial, electrical, hydraulic, pneumatic and mechanical failures Reads, manages and performs work orders of required maintenance services. The Skills You Will Bring: 3+ years in industrial manufacturing PLC troubleshooting, inputs/outputs, and changeouts of programs Experience with Factory Talk or similar HMI software Photo eyes, sensors, limit switches, and solenoids Repairing and troubleshooting conveyor systems (line controls) Mechanical Systems (bearings, chains, sprockets, gearboxes) Hydraulics & Pneumatics High and Low Voltage Ability to operate a multimeter to diagnose a variety of electrical issues Occasionally lift and/or move up to 50 pounds Frequently required to stand; walk; use hands to handle, or feel; reach with hands and arms; stoop, kneel, crouch, or crawl and talk or hear. The Benefits You Will Enjoy: International Paper offers a benefits package that includes health, welfare and retirement plans including Medical, Dental, Life insurance, Flexible Spending Accounts, Short-term Disability, 401(k) and/or Pension (where applicable), Paid Time Off, Education & Development (including Tuition Reimbursement), and Voluntary Benefits including insurance for home, auto, vision and pets. The Career You Will Build: Promotional Opportunities Leadership Development Professional Development The Impact You Will Make: We continue to build a better future for people, the planet, and our company! IP has been a good steward of sustainable practices across communities around the world for more than 120 years. Join our team and you'll see why our team members say they're Proud to be IP. The Culture You Will Experience: International Paper promotes employee well-being by providing safe, caring and inclusive workplaces. We have team members all around the world with diverse backgrounds, experiences, and perspectives. These are our strengths. We are committed to creating a culture where all individuals are respected, valued, engaged and have an opportunity to do their best work every day. We invite you to bring your uniqueness, creativity, talents, experiences, and safety mindset to be a part of our increasingly inclusive and diverse culture. The Company You Will Join: International Paper (NYSE: IP) is a leading global supplier of renewable fiber-based products. We produce corrugated packaging products that protect and promote goods, and enable worldwide commerce, and pulp for diapers, tissue and other personal care products that promote health and wellness. Headquartered in Memphis, Tenn., we employ approximately 38,000 colleagues globally. We serve customers worldwide, with manufacturing operations in North America, Latin America, North Africa and Europe. Net sales for 2022 were $21.2 billion. Additional information can be found by visiting InternationalPaper.com. International Paper is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected veteran status, age, or any other characteristic protected by law. International Paper complies with federal and state disability laws and makes reasonable accommodations for applicants and employees with disabilities. If reasonable accommodation is needed to participate in the job application or interview process, to perform essential job functions, and/or to receive other benefits and privileges of employment, please contact reasonable.accommodations@ipaper.com or ************** Share this job: Location: DES PLAINES, IL, US, 60018 Category: Hourly Job Date: Dec 2, 2025 If you are not finding suitable opportunities, please click below to join our talent community! Join Our Community Nearest Major Market: Chicago

Job DescriptionJoin our team if you love creating memorable experiences and being part of a vibrant community! At Lakeshore Sport & Fitness, we bring people together through sport, fitness, and fun across our two Chicago clubs - Lincoln Park and our Illinois Center location in the downtown Loop. Our clubs thrive on community and connection, offering a place where members of all ages can belong, grow, and feel their best. We offer competitive pay, 401(k), PTO, childcare benefits, free club membership, discounts on programs and services, and more. As part of our Maintenance Team, you'll repair and maintain equipment, perform preventive maintenance, and ensure all facilities run safely and efficiently. You'll troubleshoot systems and contribute to the upkeep of a clean, functional environment for members and staff. As the team's Electrician, you'll install, maintain, and repair electrical control, wiring, and lighting systems throughout the club. Key skills: Maintenance, HVAC, electrical, repair, facility operations, safety, troubleshooting, teamwork. Powered by JazzHR 3uAsGcjrtq

Field Service Electrician (Traveling) We are currently looking for experienced electricians with a background working in industrial and commercial facilities. This position involves visiting our client sites around the country to collect electrical distribution information. We are searching for applicants with excellent people skills and an ambition to travel. A Master's Electrician license is not required but will be regarded highly. Pay will commensurate with experience. We offer competitive salaries, group health insurance, vision, dental, generous PTO every year, and a 401(k). We also cover all travel expenses including hotel, food, car, flights, and other travel expenses. We offer competitive benefits as well as some different perks! Perks & Benefits: Use your mind, not your body! Consistent, safe work & pay - leave seasonal work behind! Keep your weekends! Ability to see the country on Herzig Engineering's dime Save thousands of dollars on personal grocery and meal expenses since all travel meals are paid for by Herzig Engineering Keep all travel rewards! - Typically earn a free vacation through travel points (hotel, airline, & rental car) Group Health Insurance, Vision & Dental 401 (k) with 3% company contribution automatic Generous PTO $3,000 signing bonus Do work that matters! - Herzig Engineering's vision is to ensure all workers return home safely. We do this by applying engineering expertise to safety consulting. Qualifications: Ability and willingness to travel 100% 5+ years of commercial/industrial electrical experience Self-Motivated Great Customer Service Skills Comfortable accessing energized electrical equipment including but not limited to; Switchgear, switchboard, panelboards, motor control centers, and busduct Quick Learner Willingness to adapt to change Journeyman/Master Electrician preferred Safety Minded Willingness to speak in front of large crowds Competency with Microsoft Office Suite (Outlook, Word, Excel, & Powerpoint) Ability to lift 50 lbs. regularly Able to read and interpret electrical one-line drawings

Responsive recruiter Join Our Team of Professional ElectriciansDo you value professionalism and punctuality? Do you want to work with the best pros in the electrical industry? Then you could be a candidate for Mister Sparky. If you value a rewarding career and would like your customers to be genuinely satisfied, you'll be fit for our team! Opportunities for professional electricians and customer service professionals are now available across the country. JOB SUMMARY This position performs and coordinates the installation and service of electrical products and services in a residential and light commercial setting. JOB DUTIES Installation, repair, and maintenance of residential and commercial electrical equipment and services Determines general condition of all electrical equipment, can troubleshoot electrical malfunctions, and determine the extent of necessary repairs Works with and understands blueprints, electrical schematics and job specifications as it applies to your craft Identify proper materials and material quantities for new and existing repair projects Use the Straight Forward Pricing Guide, accurately present repair or installation options, and complete safety inspections MINIMUM REQUIREMENTS 3+ years of verifiable residential electrician experience High school diploma or equivalent Background check and drug screening Clean driving record Ability to communicate effectively to clients about issues and provide accurate solutions Benefits Great culture and family like environment Uniforms and uniform service Company vehicle and fuel card Medical insurance 401 (k) Compensation: $25.00 - $30.00 per hour Join the Mister Sparky Team! We want to make joining our team as easy as possible. Our team members are the most valuable assets in our organization. It's true, our employees come first! How do we prove it? First things first. Pay- We believe the best performers deserve the best pay. That's why we want to pay YOU the best competitive rate. Flexibility- We want YOU to have time for the most important things in your life. Our scheduling is flexible. Find out how we do it. Career Path- We offer you an unlimited future with our world class training programs. Our training programs include Technical Training, Virtual technical training, communications, sales, and more! If you are serious about your career and want to learn from the best in the industry apply today! So, if you have a great attitude and a strong work ethic, and are someone who takes pride in the work you do, then we want to hear from you! Each franchise location is independently owned and operated by a franchisee. Your application will go directly to the franchisee, and all hiring decisions will be made by the management of this franchisee. The franchisee sets their own compensation and benefits. All inquiries about employment, benefits, scheduling and compensation at this franchise should be made directly to the franchise location, and not to Mister Sparky Corporate.

Click here to learn more about our benefits! This posting is intended to build a pipeline of qualified candidates for future opportunities. Please note that multiple positions may be filled from this posting Qualified veterans who meet the minimum requirements will receive outreach during the recruitment process in accordance with Federal and State laws, including the Illinois Veterans Preference Act. Meeting the minimum qualifications does not guarantee an interview or job offer. The most qualified candidate will be selected. This position maintains electrical equipment on diesel/electric locomotives, self-propelled coaches and passenger railcars including propulsion systems, electronic controls, lighting, generators, battery charging systems, CAB signal systems, heating and air conditioning systems, and industrial wiring. Responsible for the safety objectives, goals, and program of the organization, ensuring compliance with applicable safety rules and regulations. Promotes safe work practices as well as maintains and fosters a safe work environment. Performs all other duties as assigned. This is a Union position. Starting pay rates may vary based on entry rates in the Collective Bargaining Agreement (CBA). Metra is a railroad employer subject to the provisions of the Railroad Retirement Tax Act, not the Social Security Administration Requirements The selected candidate will be a Journeyman Electrician or possess a minimum of four years of experience working on similar equipment. Must be able to read schematic drawings. Must be available to work all shifts and work at various locations in the six county metropolitan area. Metra employees in an active review period under the current discipline policy or who have documented attendance or performance issues will not be considered and/or selected for this position. Please note: Regardless of any state laws that legalize marijuana, Metra prohibits applicants and employees' use or possession of marijuana (or marijuana paraphernalia), or having detectable amounts of marijuana in their bodies, including synthetic and/or non-synthetic substances such as THC for any reason for preemployment screening purposes, while on duty, subject to duty, on Metra property, or in Metra work equipment and vehicles. Metra is committed to ensuring that our career website and recruiting process are accessible to all individuals. If you encounter difficulties or limitations in using or accessing our online application, or if you require reasonable accommodations to complete this application, participate in interviews, complete any pre-employment testing, or engage in any other aspect of the employee selection process, please direct your inquiries to ***************. Metra is an Equal Opportunity/Affirmative Action Employer. It is our policy to fill vacant positions with qualified candidates without regard to race, color, sex, religion, national origin, age, gender identity, disability, or any protected categories, assuming an individual can perform the essential functions of the job with or without accommodation.

Click here to learn more about our benefits! This posting is intended to build a pipeline of qualified candidates for future opportunities. Please note that multiple positions may be filled from this posting Qualified veterans who meet the minimum requirements will receive outreach during the recruitment process in accordance with Federal and State laws, including the Illinois Veterans Preference Act. Meeting the minimum qualifications does not guarantee an interview or job offer. The most qualified candidate will be selected. This position maintains electrical equipment on diesel/electric locomotives, self-propelled coaches and passenger railcars including propulsion systems, electronic controls, lighting, generators, battery charging systems, CAB signal systems, heating and air conditioning systems, and industrial wiring. Responsible for the safety objectives, goals, and program of the organization, ensuring compliance with applicable safety rules and regulations. Promotes safe work practices as well as maintains and fosters a safe work environment. Performs all other duties as assigned. This is a Union position. Starting pay rates may vary based on entry rates in the Collective Bargaining Agreement (CBA). Metra is a railroad employer subject to the provisions of the Railroad Retirement Tax Act, not the Social Security Administration Requirements * The selected candidate will be a Journeyman Electrician or possess a minimum of four years of experience working on similar equipment. * Must be able to read schematic drawings. * Must be available to work all shifts and work at various locations in the six county metropolitan area. Metra employees in an active review period under the current discipline policy or who have documented attendance or performance issues will not be considered and/or selected for this position. Please note: Regardless of any state laws that legalize marijuana, Metra prohibits applicants and employees' use or possession of marijuana (or marijuana paraphernalia), or having detectable amounts of marijuana in their bodies, including synthetic and/or non-synthetic substances such as THC for any reason for preemployment screening purposes, while on duty, subject to duty, on Metra property, or in Metra work equipment and vehicles. Metra is committed to ensuring that our career website and recruiting process are accessible to all individuals. If you encounter difficulties or limitations in using or accessing our online application, or if you require reasonable accommodations to complete this application, participate in interviews, complete any pre-employment testing, or engage in any other aspect of the employee selection process, please direct your inquiries to ***************. Metra is an Equal Opportunity/Affirmative Action Employer. It is our policy to fill vacant positions with qualified candidates without regard to race, color, sex, religion, national origin, age, gender identity, disability, or any protected categories, assuming an individual can perform the essential functions of the job with or without accommodation.

Overview: Since 1963, our company has been the leading contract manufacturer of dry food products to the Fortune 500 companies that market the national brands you know and love. We partner with customers in the Custom Blending & Contract Packaging, Retail, Food service, Office Coffee Service & Vending maker segments to deliver quality food products with 216,000 square feet of manufacturing and warehouse space. We offer total rewards package, including attractive benefits, retirement saving programs, and growth opportunities. Work with an established team of long-term employees. Apply with us today to become a part of our growing team! Benefits: $1 Shift Premium, Paid Lunch, Medical, Vision, Dental, 401K Match, Paid Time Off, Paid Holidays, Onsite Gym, Wellness Program, Sign-On Bonus. First Shift: 5:00am - 3:00pm Monday through Friday Second Shift: 3:00pm - 1:00am Monday through Friday PURPOSE: To repair, maintain and change over food packaging lines. To complete minor building maintenance and blending area equipment repair. RESPONSIBILITIES: Communicates directly with the Plant Engineer to coordinate maintenance and repair work in process areas. Set priorities through the plant engineer for food packaging equipment rebuilds and preventive maintenance. Coordinates with the lead mechanic and coordinator to proactively schedule planned maintenance downtime. Provide feedback to the Plant engineer. Work complete monthly PM's correctly and completely. Participate in the maintenance training. Utilize E-Maint to verify PM compliance, assign PM, and close out work orders. Disassembles, inspects, reassembles, troubleshoots, repairs, and replaces malfunctioning parts or equipment (motors, switches, sensors, input/output board, controllers, gears, sprockets, chains, knives, etc.) using test equipment and meters such as VOM, megger, amp probe, and PC. Comply with OSHA Safety and Health standards and requirements. Abide by pant GMPs and Safety Regulations. EDUCATIONAL REQUIREMENTS: High School Diploma or Equivalent. Vocational school a plus. ADDITIONAL REQUIREMENTS: Industrial/ Manufacturing Experience. Ability to walk, stand, stoop, kneel, crouch, crawl, use hands to finger, handle, or feel objects, tools, or controls, reach with hands and arms, climb balance; and regularly lift and/ or move up to 50 lbs. Knowledge of mechanical equipment and an understanding of how machinery works. Ability to multitask and work according to deadlines. Handle confidential information appropriately. Ability to use hand tools, power tools, and shop tools. Knowledge of and ability to use electrical meters and welding equipment. Prior experience in industrial mechanics or maintenance operations - preferred. Proficient knowledge required in the use of tablets. Maintenance tracking software is a plus. Efficiency tracking software is a plus. E-Maint Boot Camp is a plus. 90% of the day spent standing and walking.

* Right across infrastructure, there's a requirement to not only maintain, but also renew and reimagine.Whatever stage you're at in your career, with us you'll have an opportunity to grow and develop. Delivering essential infrastructure services for life, while being safety first, and client and customer centric in a friendly, fun and respectful environment where you are encouraged to thrive. Where will you be working? MEICA and capital maintenance - Our Mechanical, Electrical, Instrumentation, Control & Automation (MEICA) experts offer a one-stop solution, including ongoing operation and maintenance services. What will you be doing? You'll be responsible for the delivery of preventative maintenance of electrical systems, controls and instrumentation. You'll perform reactive and corrective maintenance, fault finding, and repairs. You'll replace and calibrating instruments, installing new systems and equipment, and commissioning, all in line with BS7671 18th Edition standards. You'll ensure compliance with The Health and Safety at Work Act 1974 You'll adhere to industry, British, International, and customer standards, as well as M Group Policies, Procedures, and Safe Systems of Work. You'll be working across various sites, utilising your Z-Tech van and company fuel card. What you'll bring * You'll have successfully completed ONC/HNC in engineering (or equivalent), NVQ, or C&G Level 3 Electrical 18th Edition qualification * You'll have industrial experience * You'll have instrumentation and telemetry connection experience * You'll have demonstrated commitment to safety and adherence to safety protocols. * You'll have a valid driver's licence What's in it for you? In addition, this role offers; * Company van/vehicle and fuel card for business use * 25 days annual leave plus bank holidays * Recommend a friend - get rewarded for introducing people to us! * Matched or contributory pension scheme * Employee Assistance Programme * My Rewards portal, access to 1000's of retail discounts * Life assurance * Cycle to work scheme About us We want to be an employer of choice and a great place to work, attracting diverse and talented people, who join us and make a difference. We are one of the Top 100 UK companies actively supporting and recruiting army veterans. Our ENABLE inclusion networks bring together people who have a shared passion, to help create an environment where everyone belongs. Our values help to shape our culture and how we work with one another. We recruit with these values in mind, to ensure your aspirations, and ways of working, align with ours. * We're responsible and go further for our people, clients, communities and the planet * We're open and seek new and better ways of exceeding expectations * We're together and as one team; the whole is greater than the sum of the parts * We're ambitious and embrace opportunity, to lead essential infrastructure services for life Whether you're a trainee, apprentice or graduate, or progressing through your career, our people benefit from industry recognised programmes, training and development. It's an exceptional time to be a part of M Group. Please note: Occasionally, job adverts might be closed before the stated closing date. Do apply as soon as possible to ensure your application is considered. For certain roles, successful candidates will be subject to 3rd party background checks as part of the hiring process. Some roles require drug and alcohol testing as part of induction and onboarding. #MGroupW INDREG * Not Specified

Join our team if you love creating memorable experiences and being part of a vibrant community! At Lakeshore Sport & Fitness, we bring people together through sport, fitness, and fun across our two Chicago clubs - Lincoln Park and our Illinois Center location in the downtown Loop. Our clubs thrive on community and connection, offering a place where members of all ages can belong, grow, and feel their best. We offer competitive pay, 401(k), PTO, childcare benefits, free club membership, discounts on programs and services, and more. As part of our Maintenance Team, you'll repair and maintain equipment, perform preventive maintenance, and ensure all facilities run safely and efficiently. You'll troubleshoot systems and contribute to the upkeep of a clean, functional environment for members and staff. As the team's Electrician, you'll install, maintain, and repair electrical control, wiring, and lighting systems throughout the club. Key skills: Maintenance, HVAC, electrical, repair, facility operations, safety, troubleshooting, teamwork.

Dubak Electrical Maintenance Group is looking for Service Electricians that are tasked to respond to requests for isolated repairs and upgrades. They have skills troubleshooting wiring problems, installing wiring in existing buildings, and making repairs. Your job duties include inspecting and testing electrical components to diagnose problems, repairing broken electrical components, and installing updates for outdated electrical systems. You may work independently or with a partner, and you typically drive a truck or van with tools and materials to each job site. Must have Customer Service skills 5+ years previous Service Electrical experience Working knowledge of installing electrical systems Working knowledge of the NEC Ability to work independently Possession of electrical hand tools and test equipment Must hold a valid driver's license and a clean driving record. Must be willing to travel, work nights, weekends, and overtime. Willing and able to maintain strict adherence to safety rules and regulations Benefits: Competitive Salary Insurance (Health, Dental, Vision, Life, Short Term Disability, Long Term Disability, among many other voluntary benefit options) Paid Holidays Paid Time Off 401k and Profit Sharing Training Reimbursement Program Positive Work/Life Balance Opportunity for Advancement Dubak Electrical Group, LLC and its affiliates is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, creed, color, religion, national origin, ancestry, gender, gender identity, marital status, status with regard to public assistance, citizenship status, physical or mental disability, sexual orientation, membership or activity in a local commission, veteran status, age, or any other status protected by law. Experience: Service Electrical Journeyman: 5 years (Preferred) Industrial electrical experience Education: High school or equivalent (Preferred) Work authorization: United States (Required)