Inspector jobs in Cocoa, FL

Job Description Do you have a minimum of five (5) years' experience in aircraft maintenance on Falcon's, alteration of turbo fan powered business aircraft, and proficient in the use of the various inspection methods, techniques, and practices? If so, APPLY TODAY! Dassault Falcon Jet recently opened a state-of-the-art flagship Maintenance, Repair and Overhaul (MRO) facility at the Melbourne Orlando International Airport in Melbourne, Florida. Dassault Falcon Jet will serve customers across North and South America and beyond, the complex will accommodate all current Falcon models, (including the new, ultra-long-range Falcon 10X, the largest purpose-built business jet), and will be capable of performing major maintenance and modifications on up to 18 Falcon models. Dassault Falcon Jet in Melbourne, Florida is seeking a Quality Control Inspector who will be primarily responsible for performing inspections of aircraft maintenance and alterations for quality and airworthiness. The Quality Control Inspector may also perform aircraft maintenance (including inspection), preventive maintenance and alteration and assist customers with technical and operational support relative to the customer's aircraft. DUTIES AND RESPONSIBILITES Responsible for Quality Assurance for quality and airworthiness and may report to Maintenance Supervision for the assignment of aircraft maintenance tasks. Using technical data acceptable to and/or approved by the FAA, the Quality Control Inspector provides inspection and approval for return to service with respect to work performed. Adheres to general work and safety requirements. May travel to locations other than the Repair Station's fixed location to support customer aircraft. May perform inspections, adjusts and repairs, replace components and corrects any malfunction or deficiency with and without power applied to the aircraft. May perform repairs on components removed from the aircraft. May remove and re-install aircraft components to gain access for the performance of assigned tasks. May troubleshoot (fault isolation) aircraft system malfunction. May perform basic mechanical and electrical removals and installations. Documents, records, and signs for work performed and/or inspected per RSM/QCM. Perform other related tasks as assigned by supervision. May fuel and defuel aircraft. May perform aircraft line services. Performs inspection on-site and at off-site locations. Supports production aircraft under Production Certificate System. Assists other employees in the performance of their duties within area(s) of qualification. Is familiar with and adheres to the RSM/QCM and applicable regulations. Is responsible for and accountable for work performed. QUALIFICATIONS Possess a Mechanics certificate with Airframe and Power plant ratings. Minimum 5 years' experience in aircraft maintenance and alteration of turbo fan powered business aircraft. Trained in or experience with the methods, techniques, practices, aids, equipment, and tools used to perform aircraft maintenance and alterations. Minimum 5 years' experience working on our Falcon models. Thoroughly familiar with the applicable regulations, the RSM/QCM and proficient in the use of the various inspection methods, techniques, practices, aids, equipment, and tools appropriate for the work being performed and approved for return to service. Able to work unsupervised for extended periods. Excellent written and verbal communications skills. Can Do attitude - highly motivated, Demonstrate excellent customer service skills. Team player that exhibits and models Dassault Falcon Jet core values and attributes. Repair Station Training Applicable Airframe Initial Training Applicable Engine Training Applicable Avionics Systems Training RVSM Training FAR 91.411/FAR 91.413 Training Human Factors Training Must be able to climb and lift up to 50lbs. Performs duties as assigned. Additional Information: This position requires successful completion of the Melbourne Airport background check process. Compensation and Benefits: The compensation for this position typically falls between $38 and $55 per hour. This position is eligible for tech leveling to reflect varying levels of experience. This position is eligible for overtime and may be eligible for shift differential or relocation assistance. Note, the final compensation offered to a successful candidate will depend on several factors that may include but are not limited to the type and years of relevant experience, Falcon-specific experience, relevant education/certifications, geographic location, and shift. Our total compensation package also offers comprehensive healthcare coverage (Medical/Prescription, Dental, Vision), HSA and FSA options, 401k Plan with Company Match, Life Insurance, Disability Benefits, Supplemental Insurance, Group Legal, Paid Time Off, Tuition Reimbursement, Employee Discounts and much more. We are committed to finding the best, brightest, and most dedicated individuals in the aviation industry. Our employees are the key to our success. Soar with us.

At Disney, we're storytellers. We make the impossible, possible. We do this through utilizing and developing cutting-edge technology and pushing the envelope to bring stories to life through our movies, products, interactive games, parks and resorts, and media networks. Now is your chance to join our talented team that delivers unparalleled creative content to audiences around the world. "We create happiness." That's our motto at Walt Disney Parks and Resorts. And it permeates everything we do. At Disney, you'll help inspire that magic by enabling our teams to push the limits of entertainment and create the never-before-seen! The Metalworker QC Inspector is more than just a modern day superhero. They conduct routine inspections on rides and equipment to ensure the safety of our Guests and Cast Members. The Metalworker QC Inspector is expected to complete scheduled inspections by the end of shift and assist with repairs if necessary. The field service position may include work from elevated platforms and confined spaces throughout the Walt Disney World Parks and Resort property. The pay rate for this role in Florida is $33.40 per hour. Select benefits may be provided as part of the compensation package, such as medical, financial, and/or other benefits. To learn more about our benefits visit: ***************************************

Pay Range: $30-35 Uses predetermined methods, operations, setups and prescribed specifications to inspect visually in-process and completed products such as electronic units and subsystems, precision electromechanical assemblies or mechanical units, subassemblies, structural flaws, internal defects, and missing welds. Uses various measuring devices. Accepts, rejects, or reworks defective or malfunctioning units or systems. Works from blueprints, diagrams, dial indicators, preset micrometers, scales, fixtures, customer specifications, drawing or inspection instructions and checklists. May monitor and verify quality in accordance with statistical process or other control procedures. Benefits provided: 401K, medical, dental, and vision, sick time as applicable to state law Butler America Aerospace, LLC. is an equal opportunity employer. Butler evaluates applicants without regard to race, color, religion, sex, age, national origin, disability, veteran status, genetic information and other legally protected characteristics. The Butler America Aerospace, LLC. EEO Policy Statement and "Know Your Rights" Poster is available here: Applicant and Employee Notices. Butler America Aerospace, LLC. is committed to working with and providing reasonable accommodations to individuals with disabilities. If you need a reasonable accommodation because of a disability for any part of the employment process, please contact the Human Resources Department at accommodations@butler.com.

Job DescriptionBenefits: Bonus based on performance Competitive salary Opportunity for advancement We are seeking a detail-oriented and dependable Field Quality Control Inspector to join our team. This role involves walking residential construction sites to ensure all work meets established quality standards and complies with client and regulatory requirements. The ideal candidate will have hands-on experience in construction inspections and a strong understanding of residential building practices. Key Responsibilities: Conduct daily field inspections at residential job sites to verify that work meets quality, safety, and compliance standards Inspect construction activities such as trenching, conduit installation, grounding, structural mounting, and equipment placement Ensure contractors adhere to approved specifications, codes, and client requirements Document inspection findings using detailed field notes, reports, and photo documentation Identify deficiencies or deviations and communicate corrective actions to the appropriate team Coordinate with project managers, subcontractors, and utility representatives to resolve issues in the field Ensure proper use and handling of materials and equipment on-site Maintain organized and up-to-date records of all inspections and communications Travel between job sites as required Qualifications: Previous experience in field inspection, construction, or utility-related work (OSP/telecom/electrical a plus) Strong understanding of residential construction processes and safety standards Ability to read and interpret construction drawings, site plans, and specifications Comfortable working outdoors and walking sites daily in various weather conditions Excellent communication and reporting skills Detail-oriented with a proactive approach to identifying and resolving issues Valid drivers license and reliable transportation Job Type: Full-time, Permanent Pay: $21$25 per hour (based on experience) Expected Hours: 40 per week Schedule: 8-hour shift Day shift Monday to Friday Work Location: Field-based (on the road; residential job sites)

Orlando, FL | Paid per Inspection About Us ARC Private Provider Services, part of Milrose Consultants, LLC, is Florida's go-to expert for fast, reliable building code compliance. We specialize in private plan review and inspection services that help developers, architects, and contractors accelerate timelines and avoid costly delays-without compromising quality. With concierge-level service and deep regulatory expertise, ARC ensures projects stay on track and clients remain confident from start to finish. Position Overview ARC Private Provider Services is seeking experienced, certified inspectors to join our growing team in Central Florida. In this role, you will inspect residential and commercial structures to ensure compliance with applicable codes and ordinances. This is a Statutory position, paid for by inspection, offering flexibility and competitive compensation. (Rate per inspection ~$75-100 commensurate with experience) Join ARC and be part of a team that's reshaping how inspections in Florida-faster, smarter, and with concierge-level service! Location: Orlando, FL and surrounding Orange County areas: Lake Osceola, Seminole, Kissimmee What You'll Do Conduct inspections for Building, Mechanical, Electrical, and Plumbing systems in residential and commercial structures. Ensure compliance with Florida Building Code, County and City ordinances, and applicable trade codes. Communicate clearly with clients and contractors to explain code requirements and inspection outcomes. Organize and manage daily inspection routes efficiently. Maintain accurate documentation and submit inspection reports. Update inspection results in permit databases and stay current on code changes through independent research. What You'll Bring Required : Active BIN# (Building Inspector Number) issued by the State of Florida. Certification and experience in at least one of the following trades: Building, Mechanical, Electrical, Plumbing OR Bachelor's or Master's degrees in Structural Engineering or MEP Engineering (Mechanical, Electrical, Plumbing) AND a minimum of 3 years of relevant experience Strong knowledge of applicable codes (Florida Building Code, NFPA-70, Plumbing/Mechanical Codes). Reliable transportation and ability to travel within the designated counties. Excellent communication and organizational skills. Ability to work independently and manage your own schedule. Preferred : Multi-trade certifications. Experience with private provider inspections. Familiarity with permit databases and digital reporting tools. ARC Private Provider Services, part of Milrose Consultants LLC, is an Equal Opportunity Employer . We are committed to creating an inclusive environment for all employees and applicants. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, protected veteran status, or any other characteristic protected by law. Milrose Consultants LLC is committed to providing reasonable accommodation for qualified individuals with disabilities. If you need assistance or an accommodation due to a disability, please contact us at *******************. Notice to third party agencies: Please refrain from calling or emailing our team directly. Our in-house Talent Acquisition team manages all recruiting operations, including the selection and management of all external suppliers.

As a Quality Control Inspector, you will play a vital role in maintaining the highest standards of quality for our products. You will be responsible for thoroughly inspecting materials, components, and finished products to ensure compliance with specifications and industry standards. Your meticulous eye for detail will help us deliver products that meet and exceed customer expectations. Additionally, you will have the opportunity to collaborate with cross-functional teams, identify process improvements, and contribute to a culture of continuous improvement. You will have the chance to showcase your commitment to quality as you participate in our annual AISC QC Audits and develop goals to improve and promote quality throughout the organization. Your ability to work well with production to solve any issues that arise will be crucial in maintaining our high standards. Embrace this exciting opportunity to make a significant impact on our quality control processes and join our team of dedicated professionals. Qualifications: A minimum of 5 years of experience in laying out and fabricating steel is required for this position. Ability to accurately read and interpret fabrication and construction drawings will be essential in ensuring the quality of our products. Welding Certification in D1.1 and/or D1.5 is preferred, as it demonstrates your proficiency in welding standards. Strong attention to detail, excellent problem-solving skills, and the ability to work collaboratively with cross-functional teams is crucial in maintaining our high standards of quality. Benefits: Health/dental/vision/disability insurance Paid time off Paid holidays 401k with employer match and 100% vesting from the beginning Paid weekly Company Paid Life Insurance Selected applicant will be subject to a pre-employment physical with drug/alcohol testing.

Job Description The Quality Control Inspector is responsible for identifying, managing, and documenting events, discrepancies associated with either product or process as well as managing, writing any investigations that may be a result of those event, processing and investigating for customers, and consumer product complaints. DUTIES & RESPONSIBILITIES 1. Essential Duties: a. Perform incoming, set up, in-process and final inspection activities as specified by control plans using inspection tools such as micrometers, optical comparator, calipers. b. Perform audits and develop reports and tracking measurements as assigned by Production Planning Manager or Quality Assurance Manager. c. Complete inspection record as specified by product control plan and work instructions. d. As needed, perform open layout inspections, fulfilling product control plan and First Article requirements. 2. Supports all company programs and strictly adheres to company policies. 3. Performs other functions as assigned by supervisor from time to time. JOB SPECIFICATIONS B. Skills: Ability to multi-task and work with others in a fast-paced environment. Highly-developed problem-solving skills with a strong attention to detail. Customer-oriented and service-minded. C. Work Experience: Experienced in Manufacturing or Quality related field.

HMT has an immediate need for an API 653 certified Inspector to assist with performing inspections in accordance with API standards: Perform API 653 inspections per customer's scope of work and HMT's internal process and procedures Maintain a positive relationship between client, facility and customer Properly interpret regulations, codes and industry standards Ensure that all HMT safety policies and procedures are being followed Required Qualifications: Must hold API Certification and have API Inspection work experience. Must be technically competent and knowledgeable in the application of the current inspection codes. Preferred additional certifications: Current CPR & First Aid TWIC Card Current AOCF and or PMT III (DOT OQ) Respirator fit tested (current) Trained in OSHA 10 and or OSHA 30 JLG lift operator certification (may or may not be approved by HMT Safety Dept.) Current safety training (within the last 12 months) to include but not limited to confined space, fall protection, LOTO, HazCom, etc. About HMT: HMT is the global leader in aboveground storage tank solutions. HMT brings a distinct level of innovation and service to the tank industry through a unique approach of partnering with customers to optimize tank operations. Knowing that every customer's need is different, we use our decades of experience to customize solutions that help tank operations become more efficient, more productive and more profitable. HMT is an Equal Employment Opportunity Employer. We will not tolerate discrimination because of race, color, religion, sex, age, national origin, military or veteran status, mental or physical disability, genetic information, gender, gender identity or expression, sexual expression, or any other unlawful reason. All qualified applicants are encouraged to submit applications for employment. Employment with HMT is At-Will.

If you're a CEI Inspector looking for stability and professional growth, or an experienced CEI Inspector who's ready for the next phase of your career - we'd love to hear from you. As a CEI Inspector, you will be responsible for performing highly complex technical assignments in field surveying and construction layout, making and checking engineering computations, inspecting construction work, and conducting field tests. You will also be responsible for coordinating and managing the lower-level inspectors. * Work is performed under the general supervision of the Project Administrator. Want to work on projects that matter? Let's show you what we're building. Construction Services | DRMP Culture, benefits, growth: Discover the DRMP Difference. Careers | DRMP Your Primary Responsibilities will include * Daily documentation of contractor's work efforts. * Project coordination with Contractor's field personnel and utility owners. * Project field book preparation and documentation. * Density log book preparation and documentation. * Material sampling and testing. * Assisting with preparation of the Final Estimate package. * Measuring distances to verify accuracy of dimensions of construction activity/layout. * Verifying levels, alignment, and elevation of construction activity/installations. * Observing work in progress to ensure that procedures are followed and materials used conform to specifications. * Obtaining and preparing material samples for laboratory testing. * Examining workmanship of finished installations for conformity to standards and accepted installation. * Recording quantities of materials received or used during specified periods. * Maintaining a daily log of construction and inspection activities and comparing progress reports. * Looking for individuals to support Roadway, Bridge, Segmental, Survey, and Environmental. What you'll need * High School Graduate plus minimum of 4 years of DOT roadway and/or bridge construction experience. * Valid driver's license with approved/acceptable driving history required. * CTQP Concrete Field Inspector Level I * CTQP Concrete Transportation Construction Inspector (CTCI) Level II * CTQP Asphalt Roadway Level I & II * CTQP Earthwork Level I & II * CTQP Pile Driving Inspection * CTQP Drilled Shaft Inspection * Intermediate MOT * CTQP Final Estimates Level I * Nuclear Radiation Safety * Complete the Critical Structures Construction Issues, Self-Study Course * *Position requires a minimum of 40 hours a week with the possibility of overtime (Hourly). DRMP Offers * Excellent compensation package * Outstanding holiday and paid-time-off programs * 401(k) Plan and Match * Career Path Development Program (Management & Technical Career Tracks) * Mentorship Program * Tuition Reimbursement * Parental Leave * Competitive health and dental insurance premiums * Variety of voluntary benefit options * Short-Term Disability/Long-Term Disability * Company-furnished life insurance * Employee Assistant Program (EAP) * Flexible Spending Account * and More DRMP is a Drug and Alcohol Free workplace, an Equal Employment Opportunity employer and E-Verify employer. #LI-BM1

Company Cox Automotive - USA Job Family Group Vehicle Operations Job Profile Inspector Apprentice Management Level Individual Contributor Flexible Work Option No remote option; must work at a specified Cox location Travel % No Work Shift Day Compensation Hourly base pay rate is $13.37 - $20.00/hour. The hourly base rate may vary within the anticipated range based on factors such as the ultimate location of the position and the selected candidate's knowledge, skills, and abilities. Position may be eligible for additional compensation that may include commission (annual, monthly, etc.) and/or an incentive program. Job Description Verify vehicle information based on work order information - identify damage, missing parts, and mechanical problems by inspecting all customer vehicles at time of receipt (i.e., interior, exterior, odometer reading, trunk area, engine compartment), noting any damage or repair to frame/paint, engine noise, AC/heater operation, radio, tire condition, etc. Prepare and complete all necessary documentation. Set up system for day-end; perform day-end procedures. Maintain knowledge to ensure all policies and procedures are followed. Write electronic condition reports (ECR). Conduct OVE courtesy walks around inspections. Maintain knowledge of system capabilities, knowledge of needed/job-relevant software packages, and web-based applications. Maintain a working knowledge on improvements and changes concerning body mechanical, frame labor, inspection techniques, etc. Visibly demonstrate safety commitment by following all safety and health procedures and modeling the behaviors related to such. Actively participate in support of all safety activities aligned with Safety Excellence. Perform other duties as assigned by management. May be required to work overtime as business needs dictate. Minimum Qualifications: High School Diploma/GED. Generally, less than 2 years of experience in a related field. Safe driver's needed; valid driver's license required. Excellent communication and interpersonal skills required. Preferred: Strong technical understanding, with good organizational skills needed. Ability to multitask, follow directions and take instruction. Advanced computer skills. Ability to stand, walk, or sit for prolonged periods of time; ability to bend, stoop, squat or kneel; ability to lift and hold at least 10lbs at waist level for an extended period of-time; ability to lift-up to 30 lbs. Work Environment: Exposure to outdoor weather and inclement conditions. Moderate noise level. May be exposed to fumes and odors. May be required to work overtime (more than 40 hours per week) as business needs dictate. Drug Testing To be employed in this role, you'll need to clear a pre-employment drug test. Cox Automotive does not currently administer a pre-employment drug test for marijuana for this position. However, we are a drug-free workplace, so the possession, use or being under the influence of drugs illegal under federal or state law during work hours, on company property and/or in company vehicles is prohibited. Benefits Employees are eligible to receive a minimum of sixteen hours of paid time off every month and seven paid holidays throughout the calendar year. Employees are also eligible for additional paid time off in the form of bereavement leave, time off to vote, jury duty leave, volunteer time off, military leave, and parental leave. About Us Through groundbreaking technology and a commitment to stellar experiences for drivers and dealers alike, Cox Automotive employees are transforming the way the world buys, owns, sells - or simply uses - cars. Cox Automotive employees get to work on iconic consumer brands like Autotrader and Kelley Blue Book and industry-leading dealer-facing companies like vAuto and Manheim, all while enjoying the people-centered atmosphere that is central to our life at Cox. Benefits of working at Cox may include health care insurance (medical, dental, vision), retirement planning (401(k)), and paid days off (sick leave, parental leave, flexible vacation/wellness days, and/or PTO). For more details on what benefits you may be offered, visit our benefits page. Cox is an Equal Employment Opportunity employer - All qualified applicants/employees will receive consideration for employment without regard to that individual's age, race, color, religion or creed, national origin or ancestry, sex (including pregnancy), sexual orientation, gender, gender identity, physical or mental disability, veteran status, genetic information, ethnicity, citizenship, or any other characteristic protected by law. Cox provides reasonable accommodations when requested by a qualified applicant or employee with disability, unless such accommodations would cause an undue hardship.Applicants must currently be authorized to work in the United States for any employer without current or future sponsorship.

Company Cox Automotive - USA Job Family Group Vehicle Operations Job Profile Inspector Apprentice Management Level Individual Contributor Flexible Work Option No remote option; must work at a specified Cox location Travel % No Work Shift Day Compensation Hourly base pay rate is $13.37 - $20.00/hour. The hourly base rate may vary within the anticipated range based on factors such as the ultimate location of the position and the selected candidate's knowledge, skills, and abilities. Position may be eligible for additional compensation that may include commission (annual, monthly, etc.) and/or an incentive program. Job Description * Verify vehicle information based on work order information - identify damage, missing parts, and mechanical problems by inspecting all customer vehicles at time of receipt (i.e., interior, exterior, odometer reading, trunk area, engine compartment), noting any damage or repair to frame/paint, engine noise, AC/heater operation, radio, tire condition, etc. * Prepare and complete all necessary documentation. * Set up system for day-end; perform day-end procedures. * Maintain knowledge to ensure all policies and procedures are followed. * Write electronic condition reports (ECR). * Conduct OVE courtesy walks around inspections. * Maintain knowledge of system capabilities, knowledge of needed/job-relevant software packages, and web-based applications. * Maintain a working knowledge on improvements and changes concerning body mechanical, frame labor, inspection techniques, etc. * Visibly demonstrate safety commitment by following all safety and health procedures and modeling the behaviors related to such. Actively participate in support of all safety activities aligned with Safety Excellence. * Perform other duties as assigned by management. * May be required to work overtime as business needs dictate. Minimum Qualifications: * High School Diploma/GED. * Generally, less than 2 years of experience in a related field. * Safe driver's needed; valid driver's license required. * Excellent communication and interpersonal skills required. Preferred: * Strong technical understanding, with good organizational skills needed. * Ability to multitask, follow directions and take instruction. * Advanced computer skills. * Ability to stand, walk, or sit for prolonged periods of time; ability to bend, stoop, squat or kneel; ability to lift and hold at least 10lbs at waist level for an extended period of-time; ability to lift-up to 30 lbs. Work Environment: * Exposure to outdoor weather and inclement conditions. * Moderate noise level. * May be exposed to fumes and odors. * May be required to work overtime (more than 40 hours per week) as business needs dictate. Drug Testing To be employed in this role, you'll need to clear a pre-employment drug test. Cox Automotive does not currently administer a pre-employment drug test for marijuana for this position. However, we are a drug-free workplace, so the possession, use or being under the influence of drugs illegal under federal or state law during work hours, on company property and/or in company vehicles is prohibited. Benefits Employees are eligible to receive a minimum of sixteen hours of paid time off every month and seven paid holidays throughout the calendar year. Employees are also eligible for additional paid time off in the form of bereavement leave, time off to vote, jury duty leave, volunteer time off, military leave, and parental leave. About Us Through groundbreaking technology and a commitment to stellar experiences for drivers and dealers alike, Cox Automotive employees are transforming the way the world buys, owns, sells - or simply uses - cars. Cox Automotive employees get to work on iconic consumer brands like Autotrader and Kelley Blue Book and industry-leading dealer-facing companies like vAuto and Manheim, all while enjoying the people-centered atmosphere that is central to our life at Cox. Benefits of working at Cox may include health care insurance (medical, dental, vision), retirement planning (401(k)), and paid days off (sick leave, parental leave, flexible vacation/wellness days, and/or PTO). For more details on what benefits you may be offered, visit our benefits page. Cox is an Equal Employment Opportunity employer - All qualified applicants/employees will receive consideration for employment without regard to that individual's age, race, color, religion or creed, national origin or ancestry, sex (including pregnancy), sexual orientation, gender, gender identity, physical or mental disability, veteran status, genetic information, ethnicity, citizenship, or any other characteristic protected by law. Cox provides reasonable accommodations when requested by a qualified applicant or employee with disability, unless such accommodations would cause an undue hardship. Applicants must currently be authorized to work in the United States for any employer without current or future sponsorship.

Pritchard Industries is a dynamic and innovative provider of comprehensive facility services, dedicated to enhancing the operational efficiency of our client partners in the industries we serve. With services from facility maintenance and janitorial to landscaping, we enable desired outcomes for our clients through consistent service and outstanding people. We are seeking a Quality Control Inspector for Orlando International Airport (MCO). This dynamic, hands-on inspector will be responsible for upholding quality standards and processes to ensure the cleanliness and maintenance of airport facilities are maintained or exceed contractual obligations. This position will report to the Site Manager. Bilingual: English & Spanish required. * A current and valid Florida driver's license is required * The expectation is to work weekends, days, nights and even holidays if required Responsibilities: * Conduct regular inspections of airport facilities to ensure adherence to quality standards. * Identify opportunities for improvement and address quality concerns promptly. * Engage with customers to understand their needs and address any quality issues. * Analyze data to identify trends and areas for growth within the quality control process. * Provide training, coaching, and feedback to employees to ensure compliance with quality standards. * Generate reports and distribute them to relevant personnel and clients. * Collaborate with management to develop strategies for increasing productivity and maintaining quality. * Stay updated on industry trends and ensure quality processes align with current standards. * Other duties as needed by company Qualifications: * High school diploma or equivalent required; relevant certification or associate degree preferred. * Proven experience in quality control in janitorial/facilities management or similar industry. * Strong attention to detail and ability to identify areas for improvement. * Must have experience and knowledge in janitorial cleaning projects, i.e., floor care, strip and wax, carpet extraction, buffing, scrubbing, burnishing * Strong knowledge of janitorial cleaning equipment and ability to conduct inspections of the cleaning machines. * Excellent communication skills to interact with customers and provide feedback to employees. * Ability to analyze data and generate reports to track quality metrics * Self-motivated with the ability to work independently. Physical Demands: * The Quality Assurance position is a physically demanding position. The work requires extensive walking, standing, bending, and/or heavy lifting. Benefits: * Pay: $20.35/per hr. * Schedule: Third shift: 10:00 pm - 6:30 am * Paid holidays and vacation time * Health Benefits Package * Ancillary benefits-Life insurance, Long Term Disability, FSA, and Dependent Spending care * 401K * Opportunity for growth Management has the exclusive right to alter the scope of work within the framework of the job description at any time without prior notice. Pritchard Industries participates in E-Verify. EEO Notice: Pritchard Industries is an Equal Opportunity Employer and will consider all qualified applicants without regard to race, color, creed, genetic information, religion, national origin, ethnicity, gender; gender identity, sexual orientation, pregnancy, childbirth or related medical condition, age, disability or handicap, servicemember status, relationship or association with a protected veteran, and any other category protected by Federal, state, or local law.

Property Inspector Looking for a career that pays well without the pressure of selling? Join our team and earn $50K to $75K per year - no selling involved! Responsibilities: • Canvass local neighborhoods to identify homes with old original windows and roofing • Talk with homeowners about the benefits of brand new impact windows & roofing • Schedule appointments for FREE inspections Qualifications: • Outgoing personality • Strong communication skills • Driven to achieve goals Compensation: • Salary, Commission & Bonus (Earn $50,000 to $75,000 per year) • 5-day work schedule (No Weekends!) • Full training provided • Career growth opportunities Apply Now! Send your phone number and updated resume. Qualified applicants will be contacted for a phone interview.

32808 Job Family: Termite We are seeking a hard-working, personable, and sales-oriented team player to join our Aptive team! This is a full-time Termite Sales Inspector position located on the road in the area around Orlando, Florida. Termite Sales Inspectors are expected to make sales by converting leads into customers. The individual we are looking for is also someone that enjoys working in a team environment, excels working at an individual level, and is looking to grow their career in sales. * $18hr + Commission * Company iPhone * Company Vehicle * 90% percent of your day is set up for you * Lucrative commission plan What we offer: * Ability to make overtime * Company vehicle provided which can be taken home nightly * Company gas card provided * Ability to work outside in your local area * Paid training * Group Health, Dental, and Vision plans * Pet insurance, Life insurance, and EAP benefits * 401K with employer match up to 4% * Paid holidays and paid time off * Opportunity for advancement * Upbeat and exciting company culture and much more! Responsibilities include: * Meet daily in-person with warm leads to sell termite solutions * Engage with customers in a friendly and respectful manner * Answer questions and provide clear, concise information Work to achieve monthly or quarterly sales KPI's, metrics and goals. * Schedule and confirm appointments promptly and professionally * Follow company guidelines for personal grooming and hygiene * Conduct thorough inspections of both interior and exterior areas of the property * Identify locations conducive to termites and preventative measures we would take to protect the home from future infestations * Identify signs of termite activity, including mud tubes, damaged wood, and termite droppings * Distinguish between active and inactive termite infestations by analyzing signs of recent activity * Document and report the status of colonies accurately * Articulate expectations for curative treatments * Provide a detailed explanation of inspection results to customers * Demonstrate how the treatment will effectively address the specific issues found during the inspection * Develop a clear and detailed diagram of the property highlighting where the termite treatment system will be placed * Ensure the diagram is easy to understand and accurately represents the planned installation * Use the diagram to explain the installation process and benefits to the customer * Work schedule includes every other Saturday Qualifications: * 1+ years of successful, prior Termite sales experience * Active Termite Inspector license in the state of Florida preferred * A US driver's license that has been valid for a minimum of 3 years is required * A clean driving record is required (no more than one moving violation in the past year and no more than 2 moving violations in the past 4 years) * A drug test and background check will be performed on all new hires * Ability to pass and maintain any state regulatory agency-required licensing/certification exams Aptive Environmental: Aptive Environmental provides pest control services to 34 states in the US. Co-founded in 2015 by Vess Pearson and David Royce, Aptive launched with the clear intention of becoming a world-recognized brand. In 2021, Aptive was included in Inc. Magazine's "Best in Business" list of companies that make a positive impact. Aptive is also featured on Glassdoor's 2019 list of Top 100 US workplaces and is ranked one of Entrepreneur Magazine's Best Companies in America. We are a proud member of the EPA's Pesticide Environmental Stewardship Program and have partnered with the United Nations Foundation's "United to Beat Malaria" to help stop the spread of malaria transmitted by mosquito bites. * Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. If you require reasonable accommodation in completing this application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please inform your recruiter.

We are looking for a diligent and detail-oriented Quality Inspector to join our warehouse team. The Quality Inspector will be responsible for ensuring the quality and quantity of items received and shipped for orders related to the Department of Defense (DOD). The ideal candidate will have strong organizational skills, a keen eye for detail, and the ability to work in a dynamic, fast-paced environment. What You'll Do: Receive and inspect incoming shipments to ensure items meet required quality and quantity specifications. Conduct random quality inspections of assemblies throughout the production process and perform final inspections of completed orders before shipment. Handle necessary paperwork, including inventory records, inspection reports, and receiving forms. Accurately enter inspection and inventory data into the company's computer system. Keep track of job orders, percentage of completion and deadlines. Assist the production department with tasks as needed, demonstrating flexibility and a willingness to take on multiple roles. What You'll Need: Must possess a valid forklift operator license. Must be a U.S. citizen (required for DOD-related work). Ability to pass a background check and drug test. Bilingual (English/Spanish) preferred. High attention to detail and strong organizational skills. Familiarity with warehouse operations, inventory management, and quality control processes. Handy and comfortable working with tools and in a hands-on environment to optimize processes and space utilization. Flexibility to wear multiple hats and assist other departments as needed. Basic computer proficiency for data entry and reporting. Ability to lift and move objects weighing up to 50lbs. Ability to stand and walk for extended periods in a warehouse environment. What You'll Get: Range: $42,000-$45,000 Medical Insurance: Employer pays 50% of medical insurance cost 6 annual paid holidays (available after 90 days of employment) 5 days' vacation + 3 sick days after 1 year of employment

Job Description Job Title: Quality Control Inspector Division: FiOptix Inc FSLA Status: Non-Exempt Reports To: Project Manager Job Summary: This position is responsible for identifying and escalating quality deficiencies to support the completion of assigned work. Essential Duties and Responsibilities: Perform real time inspections evaluating safety, compliance standards, appearance, and customer experience Schedule and complete a final inspection of work prior to customer walkthrough Complete and submit timely and accurate quality control reports into the appropriate database Develop and maintain relationships with the quality control counterparts of our customers Respond appropriately to customer complaints and inquiries and escalate matters as required Execute target amount of job safety observations Identify areas of improvement to enhance quality and escalate recommendations to management Complete all required Company documentation Other duties as assigned Qualifications: To perform this job successfully, an individual must be able to perform each essential duty mentioned satisfactorily. The requirements listed below are representative of the knowledge, skills, and/or ability required. Education: High school diploma, general education degree (G.E.D.), or related trade school education Experience: One-year telecommunications quality control experience One-year underground construction, aerial construction, and/or multi dwelling unit (MDU) experience Knowledge of highway traffic control standards Technical Skills: Computer and Microsoft Office proficiency Ability to use a wireless tablet Proven knowledge of utility depths and placement Proven ability to read and interpret design prints Soft Skills: Highly organized and detail orientated Strong verbal and written communication skills Ability to work independently and as a member of various teams Ability to multi-task and work in a fast-paced environment under tight deadlines Ability to lead, teach, and train other employees Physical Requirements: Must be able to pass pre-employment screening that includes background and drug testing Must have a valid driver's license and a driving record that meets Company requirements Must be in good physical condition with the ability to stoop, crawl, bend at the knees and waist, squat and lift up to 50 lbs. Ability to stand for long periods of time on varied surfaces Ability to work outdoors in all types of weather May be required to work long and unpredictable hours Ability to travel up to 100% of the time, including short notice travel. Travel includes local site travel or national travel depending on business needs. Disclaimer: All job requirements are subject to possible revision to reflect changes in the position requirements. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions and expectations

Aoka is a third-party municipal services provider supporting federal, state, and local governments with code compliance, inspections, and consulting services. We specialize in delivering efficient solutions for building safety, housing standards, and regulatory compliance. Our proprietary software, VertexPlans, streamlines inspection services by integrating plan reviews, field inspections, and reporting into one seamless platform-ensuring faster turnaround times and improved communication for our clients. We are currently seeking a qualified OHP compliance Inspector to perform Housing Quality Standards (HQS) inspections for Senior care facilities. Responsibilities Schedule and conduct on-site inspections for new construction and substantial rehabilitation of Senior Living properties Evaluate units for compliance with HUD Housing Quality Standards (HQS) Complete inspection reports and required documentation in accordance with HUD and company guidelines Qualifications Willingness to travel for inspections Valid driver's license and reliable transportation ICC certification, engineering license, or architectural license OR At least 5 years of experience in multifamily housing inspection is required Compensation $30 - $60 per hour, based on experience and qualifications Apply Now to Join Our Growing Team! Aoka is proud to be an equal opportunity employer and provides equal employment opportunities (EEO) to all employees and applicants without regard to race, color, religion, sex, national origin, age, disability, veteran status, sexual orientation, gender identity or genetics.

- Canvass neighborhoods to find old original windows and damage roofing, then schedule FREE Inspections with homeowners. PAID TRAINING $15 Per Hour Plus Commission Earn $50K to $75K FULL SUPPORT AMAZING HOURS ADVANCEMENT OPPORTUNITIES Responsibilities: • Canvass neighborhoods to find old original windows and damage roofing • Speak with Homeowners educate them about the benefits of impact Windows/Doors and New Roofing and Schedule FREE inspections for windows doors and roofing Requirements: • Outgoing personality with strong communication skills - Must be Bilingual in English and Spanish Compensation: • Competitive earnings: $15 per hour plus commission Earn $50K to $75K To Apply: All applicants must submit their updated resume along with their contact phone number.

Do you have a minimum of five (5) years' experience in aircraft maintenance on Falcon's, alteration of turbo fan powered business aircraft, and proficient in the use of the various inspection methods, techniques, and practices? If so, APPLY TODAY! Dassault Falcon Jet recently opened a state-of-the-art flagship Maintenance, Repair and Overhaul (MRO) facility at the Melbourne Orlando International Airport in Melbourne, Florida. Dassault Falcon Jet will serve customers across North and South America and beyond, the complex will accommodate all current Falcon models, (including the new, ultra-long-range Falcon 10X, the largest purpose-built business jet), and will be capable of performing major maintenance and modifications on up to 18 Falcon models. Dassault Falcon Jet in Melbourne, Florida is seeking a Quality Control Inspector who will be primarily responsible for performing inspections of aircraft maintenance and alterations for quality and airworthiness. The Quality Control Inspector may also perform aircraft maintenance (including inspection), preventive maintenance and alteration and assist customers with technical and operational support relative to the customer's aircraft. DUTIES AND RESPONSIBILITES * Responsible for Quality Assurance for quality and airworthiness and may report to Maintenance Supervision for the assignment of aircraft maintenance tasks. * Using technical data acceptable to and/or approved by the FAA, the Quality Control Inspector provides inspection and approval for return to service with respect to work performed. * Adheres to general work and safety requirements. * May travel to locations other than the Repair Station's fixed location to support customer aircraft. * May perform inspections, adjusts and repairs, replace components and corrects any malfunction or deficiency with and without power applied to the aircraft. * May perform repairs on components removed from the aircraft. * May remove and re-install aircraft components to gain access for the performance of assigned tasks. * May troubleshoot (fault isolation) aircraft system malfunction. * May perform basic mechanical and electrical removals and installations. * Documents, records, and signs for work performed and/or inspected per RSM/QCM. * Perform other related tasks as assigned by supervision. * May fuel and defuel aircraft. * May perform aircraft line services. * Performs inspection on-site and at off-site locations. * Supports production aircraft under Production Certificate System. * Assists other employees in the performance of their duties within area(s) of qualification. * Is familiar with and adheres to the RSM/QCM and applicable regulations. * Is responsible for and accountable for work performed. QUALIFICATIONS * Possess a Mechanics certificate with Airframe and Power plant ratings. * Minimum 5 years' experience in aircraft maintenance and alteration of turbo fan powered business aircraft. * Trained in or experience with the methods, techniques, practices, aids, equipment, and tools used to perform aircraft maintenance and alterations. * Minimum 5 years' experience working on our Falcon models. * Thoroughly familiar with the applicable regulations, the RSM/QCM and proficient in the use of the various inspection methods, techniques, practices, aids, equipment, and tools appropriate for the work being performed and approved for return to service. * Able to work unsupervised for extended periods. * Excellent written and verbal communications skills. * Can Do attitude - highly motivated, * Demonstrate excellent customer service skills. * Team player that exhibits and models Dassault Falcon Jet core values and attributes. * Repair Station Training * Applicable Airframe Initial Training * Applicable Engine Training * Applicable Avionics Systems Training * RVSM Training * FAR 91.411/FAR 91.413 Training * Human Factors Training * Must be able to climb and lift up to 50lbs. * Performs duties as assigned. Additional Information: This position requires successful completion of the Melbourne Airport background check process. Compensation and Benefits: The compensation for this position typically falls between $38 and $55 per hour. This position is eligible for tech leveling to reflect varying levels of experience. This position is eligible for overtime and may be eligible for shift differential or relocation assistance. Note, the final compensation offered to a successful candidate will depend on several factors that may include but are not limited to the type and years of relevant experience, Falcon-specific experience, relevant education/certifications, geographic location, and shift. Our total compensation package also offers comprehensive healthcare coverage (Medical/Prescription, Dental, Vision), HSA and FSA options, 401k Plan with Company Match, Life Insurance, Disability Benefits, Supplemental Insurance, Group Legal, Paid Time Off, Tuition Reimbursement, Employee Discounts and much more. We are committed to finding the best, brightest, and most dedicated individuals in the aviation industry. Our employees are the key to our success. Soar with us.