Inspector jobs in Concord, PA - 198 jobs

Job Purpose Nondestructive Testing (NDT) Level III Radiographer (RT) is tasked with the day-to-day operations of the NDT department and supervision of NDT inspectors. Provide real time x-ray service and support to the assigned projects and programs to ensure product meets customer quality requirements. Essential Duties and Responsibilities: Radiographer (RT) Level III Real Time x-ray certification Knowledge of real time x-ray equipment and imaging software, radiographer interpretations Maintain all X-Ray related Equipment / Systems Perform Real-time X-Rays on products and components per existing Procedures and Operating Instructions for internal and external customers Train, qualify and certify NDT RT inspection personnel Write NDT Procedures Develop NDT X-ray inspection techniques Support manufacturing operation level procedures, inspection techniques Support NDT investigations, perform inspections and participate in supplier audit if required Ensure compliance with customer and certification agency regulations Provide NDT RT certification and data for completed X-ray inspections Maintain safe work environment with X-ray monitor equipment, maintain x-ray report and digital logs for Florida Department of Health audits Other duties as assigned Travel 30-40% Qualifications : To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. High School Diploma or equivalent; Associates Degree preferred Five (5) years of work experience as NDT RT Level II in aerospace inspections Certified ASNT NDT Level III Familiar with quality system requirements (ASME Section III, ANSI, NQA-1, AS9100, ISO9001, etc.) Ability to read, interpret, and apply engineering drawings and specifications Competent computer skills, including MS Office, specifically Word and Excel Ability to read, write, and understand English Minimum and Preferred Qualifications: Must be qualified and certified to ASNT-TC-1A in the following NDT Methods that will be utilized: Radiographic (RT) Preferred candidate will be Certified in one or more of the following NDT methods in conjunction with RT: Visual Examination (VT), Liquid Penetrant Examination (PT) Magnetic Particle Examination (MT) Ultrasonic Examination Required education: Required: High School diploma or equivalent with at least 3 years of inspection related experience. Preferred: 2 years of inspection related experience with a completion of 2 years or college in technical or engineering related discipline from a university, college, or technical school. Preferred:1 year of inspection related experience with a degree in engineering or science from a university or accredited college. Required Licenses or Certifications: Valid Driver's License Previous Level III Certification to ASNT-TC-1A including documented objective evidence of classroom and on the job training experience

Job Description The Quality Inspector's role is to utilize curtainwall knowledge alongside 2D and 3D engineering / CAD drawings to identify potential quality and installation issues in curtainwall components or units. A Quality Inspector may be assigned work in different areas, depending on production requirements. All Quality Inspectors are required to abide by all applicable New Hudson Facade requirements, as outlined in the Employee Handbook. Quality Inspectors directly report to the Quality Supervisor. Role and Responsibilities: Inspect and approve curtainwall components or units at various points of the manufacturing process for compliance with curtainwall quality/cleanliness expectations. Inspect and test incoming materials (aluminum, glass, stone, machined parts, etc.) against drawings, procedures and other defined quality standards; enters inspection results in Epicor; maintains various inspection logs and spreadsheets; inspects completed curtain wall units and crating. Enters NCRs for discrepant materials as found after inspection; assists the QC Coordinator in tagging and managing rejected parts. Read and manipulate 2D / 3D engineering CAD drawings to determine if curtainwall units and its individual components are fabricated and installed correctly. Communicate with upstream quality / assembly personnel when quality issues are identified. Provide information that can support the quality of the completed curtainwall unit. Maintain inspection logs and spreadsheets, as needed. Utilize ADP / Epicor to track hours spent supporting projects. Comply with all safety standards and requirements defined by NHF. Care of all assigned tools (calipers, spectrophotometers, protractors, etc.). Other tasks as required by management. Skills and Abilities: Experience working in a heavy manufacturing or large-assembly environment. Ability to read and understand 2D engineering drawings. Familiarity with manipulating 3D engineering drawings on CAD software. Advanced knowledge and experience with measurement tools (Tape measure, caliper, protractor, etc). Ability to act with professionalism; ability to multitask. Ability to follow both written and verbal instruction. Communication skills (both written and verbal). Physical Requirements: Ability to move equipment weighing up to 50 pounds. Applicants must be able to perform repetitive lifting and other physically demanding tasks. Qualifications and Education Requirements: HS Diploma AS Degree or higher preferred. Experience in the curtainwall / construction industry preferred. New Hudson Facades is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex including sexual orientation and gender identity, national origin, disability, protected Veteran Status, or any other characteristic protected by applicable federal, state, or local law.

The Certified Welding Inspector (CWI) supports Sea Boxs quality objectives by setting and implementing the companys standard for welding and workmanship. Sea Box, Inc. seeks a Certified Welding Inspector (CWI) that sets, maintains, and finds ways to improve a standard by which quality and success is measured. It will leverage ones skill and experience to set an example for others to learn from and live up to. The Certified Welding Inspector reports to the Quality Department Manager and works in partnership with Production Department personnel and Project Managers. The successful candidate will get in front of quality issues by identifying them before they become a problem and maintain direct/ ensure the companys welding program in accordance with AWS/SNT-TC-1A. Responsibilities: · Implement and report on welding and NDT inspection processes · Review and understand SOWs and Mil-Specs in order to ensure compliance · Train, certify, qualify, and monitor welders/inspectors to have 100% accountability of status · Quantitatively assess welding performance company-wide · Perform in-house calibration of welding equipment · Maintain calibration records and labels for welding equipment and maintain schedule/ tracking · Complete and maintain quality department reporting and documentation · Monitor and maintain welding certifications and related documentation · Provide welding expertise for nonconformance/corrective action investigation Requirements: · AWS Certified Welding Inspector · Knowledge of MIL-standards and international standards · NDT Level II: visual testing, magnetic particle, and penetrant testing · Ability to understand structural steel plans and technical specifications · Proficiency with weld inspection methods and tools · Ability to complete and communicate daily work reports · Beginner to intermediate skills with Microsoft Word and Excel · Ability to work independently with minimal supervision · Willingness to develop skill sets as needed through training/certification programs Experience: · 2-5 years of experience in quality related to welding · Proven leadership experience in a quality environment a plus Why work for Sea Box? We offer benefits to our full-time employees that include: Health Insurance Dental Insurance Vision Insurance Basic and Voluntary Life Long-Term Disability Flexible Spending Accounts Employee Assistance Program Paid Time Off Paid Holidays, Bereavement, Jury Duty 401(k) with company match Employee Referral Program Employees are eligible for most benefits on the 1st of the month following date of hire. Salary Range: $55,000 - $70,000 Location: This position is onsite (non-remote) at the Companys corporate headquarters in Cinnaminson, NJ. This position may occasionally require working overtime and/or working outside of the Companys normal 8:30am 5:30pm hours of operation. PI5d1975600f0d-31181-38565051

About the Role: TAI is looking for a seasoned API 653 Inspector to lead and manage large above-ground tank inspection projects. The ideal candidate will have at least 10 years of experience, with a proven track record of supervising teams, overseeing all project phases from start to finish, and serving as a key point of contact for major clients in the chemical and power generation industries. If you are a self-motivated leader with a knack for problem-solving and a desire to make a significant impact, we offer a challenging role with the opportunity to take ownership of high-profile projects. Join our team and play a critical part in ensuring the safety and integrity of essential infrastructure. About TAI: TAI is a full-service, multi-disciplinary engineering and construction firm built to scale; delivering mission-critical, integrated solutions across the full design-build-maintain lifecycle. For more than 35 years, TAI has partnered with leading organizations in advanced manufacturing, life sciences, food and beverage, energy, and government to design, build, and sustain complex facilities and infrastructure. TAI brings deep expertise across five core service pillars: Engineering, Construction, Systems Integration, On-Site Services, and Technical Services. Our unified approach combines precision engineering, field execution, and technical depth to deliver end-to-end results that drive reliability, safety, and long-term value for our clients. Team members at TAI are capable, well-rounded, flexible, and optimistic. We have found that the best employees are the ones who recognize the importance of what they do and the ones who let that guide them in the actions they take. More than any skill, we seek people who make decisions that support the common good. We work for our clients, and we work for one another. Here's a glimpse into your day to day: * Provide project management support on Large Above ground Tank Inspection projects, and as needed for other inspection projects. * Ensure project deliverables meet TAI and client expectations * Manage all phases of a project - setup, execution, and closeout * Develop and maintain project schedules and budgets. * Provide a single point of contact between TAI and client - getting info from client to carry out successful inspection project, providing the client with necessary information and resolving most project issues with the client. * Prepare initial budget, tracking overall costs, approving pending invoices, and pursuing change orders as required. * Perform overall project quality control. * Visit field to scope out projects. * Support proposal development by assisting with scope development, cost estimating and execution plan coordination. * Experience and knowledge of Magnetic Flux Leakage Technology (MFL). * Experience and knowledge of floating roofs and seal inspections. * Meet with clients to provide recommendations on the repair/ replacement/alteration of plant equipment as required for safe operation. * Maintains a safe, secure and healthy environment by adhering to Company/Customer safety standards and practices and to legal regulations, alerting others regarding potential hazards or concern. * Conduct daily safety risk assessments on routine and non-routine job tasks. * Scheduling activities related to inspection. * Prepare isometric drawings and field sketches of piping for pipe inspections * Review and interpret P&ID's * Writes detailed inspection reports and maintains documentation of inspection activities. * Identifies circumstances that necessitate the use of proper safety procedures and equipment. * Communicate with clients and other parties in such a manner as to benefit the professional reputation of the company. You'll be a perfect fit if you have: * High School Diploma, some college coursework preferred. * API 653 Certification. * Have a minimum of 10 years' experience working as an API Inspector within related industry * At least 5 years' experience managing large Above Ground Tank Inspection projects. * Prior experience supervising a project team * Self-motivated individual with the ability to work independently and oversee large projects. * Experienced with using Magnetic Flux Leakage Technology (MFL) * Demonstrated ability to perform complete inspection reports for equipment or piping. * Inspection: Know the significance of what is observed and recognize the potential significance of what cannot be observed. Critical-minded and curiosity as to conditions and findings. * Documentation: Clarity, comprehensiveness, and professional presentation of reports. * High reach operation ability. * Demonstrated leadership, interpersonal and communication skills. * Travel: Will travel up to 50% out of town. Physical Requirements: * Capacity to perform physically demanding work: Climbing, pipe rack walking, tight-spot body positioning/maneuvering. * Must be able to remain in a stationary position as necessary to complete assigned tasks. * The person in this position needs to frequently move about client's facilities and offices to access equipment and complete tasks. * Consistently ascend and descend portable and fixed ladders, scaffolding and other equipment used to reach equipment at various levels of height some of which maybe in excess of 25 feet in a safe manner. * Must be able to ascend and descend a large quantity of stairways at any given time. * Frequently move tools and equipment weighing up to 50lbs across client facilities as needed to complete tasks. * Occasionally lift and move equipment in excess of 100lbs in a safe manner. * Must be able to work in outdoor weather conditions as needed. Compensation and Benefits: * Pay: $55-65/hour (based upon experience) * Annual Profit Sharing Bonus (variable) * PTO and Paid Holidays * Health Benefits: Employee through family level coverage for medical, dental, and vision insurances. Company funded life and long-term disability insurances. Short Term Disability, FSA, HSA, EAP, and supplemental life insurances (employee - family) are also available! * 401(k)with employer match Other Offerings: * The opportunity to make a real impact on a variety of industry-leading projects. * The ability to balance your work and family activities. * Flexible work schedule * Work in a dynamic and collaborative environment that values creativity and innovation. * A chance to learn and grow alongside some of the brightest minds in engineering. * Professional Development, Tuition Reimbursement, and Association Membership Reimbursements. Discover what makes TAI a top-20 manufacturing partner, according to Engineering News-Record (ENR), and one of the top-50 fastest-growing private companies in the Baltimore Business Journal. Learn more about us at ***********************

**About the Role:** TAI is looking for a seasoned API 653 Inspector to lead and manage large above-ground tank inspection projects. The ideal candidate will have at least 10 years of experience, with a proven track record of supervising teams, overseeing all project phases from start to finish, and serving as a key point of contact for major clients in the chemical and power generation industries. If you are a self-motivated leader with a knack for problem-solving and a desire to make a significant impact, we offer a challenging role with the opportunity to take ownership of high-profile projects. Join our team and play a critical part in ensuring the safety and integrity of essential infrastructure. **About TAI:** TAI is a full-service, multi-disciplinary engineering and construction firm built to scale; delivering mission-critical, integrated solutions across the full design-build-maintain lifecycle. For more than 35 years, TAI has partnered with leading organizations in advanced manufacturing, life sciences, food and beverage, energy, and government to design, build, and sustain complex facilities and infrastructure. TAI brings deep expertise across five core service pillars: Engineering, Construction, Systems Integration, On-Site Services, and Technical Services. Our unified approach combines precision engineering, field execution, and technical depth to deliver end-to-end results that drive reliability, safety, and long-term value for our clients. Team members at TAI are capable, well-rounded, flexible, and optimistic. We have found that the best employees are the ones who recognize the importance of what they do and the ones who let that guide them in the actions they take. More than any skill, we seek people who make decisions that support the common good. We work for our clients, and we work for one another. **Here's a glimpse into your day to day:** + Provide project management support on Large Above ground Tank Inspection projects, and as needed for other inspection projects. + Ensure project deliverables meet TAI and client expectations + Manage all phases of a project - setup, execution, and closeout + Develop and maintain project schedules and budgets. + Provide a single point of contact between TAI and client - getting info from client to carry out successful inspection project, providing the client with necessary information and resolving most project issues with the client. + Prepare initial budget, tracking overall costs, approving pending invoices, and pursuing change orders as required. + Perform overall project quality control. + Visit field to scope out projects. + Support proposal development by assisting with scope development, cost estimating and execution plan coordination. + Experience and knowledge of Magnetic Flux Leakage Technology (MFL). + Experience and knowledge of floating roofs and seal inspections. + Meet with clients to provide recommendations on the repair/ replacement/alteration of plant equipment as required for safe operation. + Maintains a safe, secure and healthy environment by adhering to Company/Customer safety standards and practices and to legal regulations, alerting others regarding potential hazards or concern. + Conduct daily safety risk assessments on routine and non-routine job tasks. + Scheduling activities related to inspection. + Prepare isometric drawings and field sketches of piping for pipe inspections + Review and interpret P&ID's + Writes detailed inspection reports and maintains documentation of inspection activities. + Identifies circumstances that necessitate the use of proper safety procedures and equipment. + Communicate with clients and other parties in such a manner as to benefit the professional reputation of the company. **You'll be a perfect fit if you have:** + High School Diploma, some college coursework preferred. + API 653 Certification. + Have a minimum of 10 years' experience working as an API Inspector within related industry + At least 5 years' experience managing large Above Ground Tank Inspection projects. + Prior experience supervising a project team + Self-motivated individual with the ability to work independently and oversee large projects. + Experienced with using Magnetic Flux Leakage Technology (MFL) + Demonstrated ability to perform complete inspection reports for equipment or piping. + Inspection: Know the significance of what is observed and recognize the potential significance of what cannot be observed. Critical-minded and curiosity as to conditions and findings. + Documentation: Clarity, comprehensiveness, and professional presentation of reports. + High reach operation ability. + Demonstrated leadership, interpersonal and communication skills. + Travel: Will travel up to 50% out of town. _Physical Requirements:_ + Capacity to perform physically demanding work: Climbing, pipe rack walking, tight-spot body positioning/maneuvering. + Must be able to remain in a stationary position as necessary to complete assigned tasks. + The person in this position needs to frequently move about client's facilities and offices to access equipment and complete tasks. + Consistently ascend and descend portable and fixed ladders, scaffolding and other equipment used to reach equipment at various levels of height some of which maybe in excess of 25 feet in a safe manner. + Must be able to ascend and descend a large quantity of stairways at any given time. + Frequently move tools and equipment weighing up to 50lbs across client facilities as needed to complete tasks. + Occasionally lift and move equipment in excess of 100lbs in a safe manner. + Must be able to work in outdoor weather conditions as needed. **Compensation and Benefits:** + Pay: $55-65/hour (based upon experience) + Annual Profit Sharing Bonus (variable) + PTO and Paid Holidays + Health Benefits: Employee through family level coverage for medical, dental, and vision insurances. Company funded life and long-term disability insurances. Short Term Disability, FSA, HSA, EAP, and supplemental life insurances (employee - family) are also available! + 401(k)with employer match **Other Offerings:** + The opportunity to make a real impact on a variety of industry-leading projects. + The ability to balance your work and family activities. + Flexible work schedule + Work in a dynamic and collaborative environment that values creativity and innovation. + A chance to learn and grow alongside some of the brightest minds in engineering. + Professional Development, Tuition Reimbursement, and Association Membership Reimbursements. Discover what makes TAI a top-20 manufacturing partner, according to Engineering News-Record (ENR), and one of the top-50 fastest-growing private companies in the Baltimore Business Journal. Learn more about us at *********************** TAI provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

This is a Part-Time Lane Inspector Position. Opus is a world-leading vehicle inspection and intelligent vehicle support company that has been contributing to a safer and cleaner world since the company was founded in 1990. We take pride in helping make our world a safer and cleaner place. Duties and Responsibilities: Lane Inspector - Vehicle Emissions testing. You will play an important role in limiting the production of Emissions by identifying the polluting vehicles. As a lane inspector, YOU will be responsible for the following: * Perform emission inspection functions following established procedures, and enter and verify vehicle information with computer data. * Operate vehicles during the emissions system test and use exhaust analysis equipment. * Direct motorists in and out of the station, provide test results, instruct customers on next steps in the inspection process, and collect inspection fees. * Other job duties as assigned. No experience required; we will train you! Requirements: * Must be 18 years of age. * Valid and unrestricted driver's license. * Physically able to stand, bend, stoop, kneel, and balance unassisted for extended periods of time. * Physically able to lift, push, and pull up to 20 lbs on an occasional basis. * Basic computer skills. * Saturday availability required - (State & Program Specific) * Part-time hours requirement is between 20 - 30 hours a week. - (State & Program Specific) Qualifications: * Team player. * Excellent customer service skills. * Ability to work efficiently and multitask in a fast-paced, busy shop environment with a smile and positive attitude. * Work in an environment that includes vehicle exhaust fumes, noise, and heat. * Work in all weather conditions. * Work safely around operating motor vehicles. All offers of employment are contingent upon completing and meeting the criteria of a background check, drug screening, and I-9 verification.

RK&K is hiring a Building Construction Inspector to monitor active construction sites and perform complex and routine inspections of construction to ensure structures and facilities have been built in compliance with building codes and ordinances. Location will be Cecil County Maryland. Essential Functions Inspect facilities during various stages of construction and remodeling to ensure compliance with applicable codes, ordinances and regulations Examine plans and specifications of new construction, additions and alterations to facilities to determine compliance with the provisions of applicable city, state, and federal construction codes, ordinances, rules, and regulations Inspect existing buildings and premises for change of use, occupancy, or compliance with applicable codes and ordinances Inspect foundation, concrete, steel, masonry, wood construction, framing, plumbing, heating and electrical installations and a large variety of other complex and routine building system elements Directly responsible for reporting on-site activities and daily progress Responsible to be able to witness, understand, and verify all required on-site testing is being performed in accordance with applicable standards Maintain project records, files and reports regarding inspections and follow-on activities Required Skills and Experience High School diploma or equivalent Experience inspecting for compliance with local Building and Plumbing codes as well as the National Electric Code and UL compliance Experience inspecting HVAC installation including balance and alignment testing Experience with inspection of pumping units, including controls Experience with both installation and testing of fire alarm systems and fire suppression systems Experience interacting with local code inspectors, permitting agencies and the fire marshal. Must be able to operate basic Microsoft Office Applications, Laptop and iPad Excellent communication skills Ability to read and interpret construction drawings and specifications Ability to pass Criminal History Background Check (CHBC) Valid driver's license and favorable driving record Other Duties This job description indicates the general nature and levels of work, knowledge, skills, abilities, and other essential functions (as covered under ADA). It is not designed to cover or contain a comprehensive listing of all activities and duties required by the employee. Other duties are assigned as required . What We Offer RK&K offers excellent potential for career advancement and professional growth. We also offer attractive compensation packages commensurate with experience and a comprehensive benefits package including: Paid time off Tuition reimbursement Health, dental, vision, life, and disability insurances Matching 401(k) plan Paid Holidays Much, much more! Why RK&K? As a full-service engineering and construction management firm, RK&K gives you the opportunity to directly impact the communities in which we live and work. What sets RK&K apart is an award-winning culture that has fostered a spirit of collaboration and trust for over 100 years. To its clients, the firm delivers concepts, processes, and outcomes that are designed for success. RK&K has earned its reputation as a trusted partner, responsive employer, and community steward. Design your career at RK&K, Apply Today! Pay Rate: $30 - $38 per hour

Job Description Job Summary: The State Inspector is responsible for examining motor vehicles to ensure vehicles operating on state highways meet all requirements established by the Maryland's department of motor vehicles. ******* $5000.00 DOLLAR SIGN ON BONUS ******* Benefits Competitive Pay- 70k - 120k yearly pay. This is a flat-rate position hourly rate pending on experience Full Benefits Package - Medical, Dental, Vision, matching 401k, and Life Insurance, disability, cancer, accident, hospital and critical illness Opportunities for growth Paid vacation 15 days depending on years of service 5 days of sick leave Paid leave up to 6 holidays Up to 3 days of bereavement leave Employee assistance program; and unpaid personal leaves absence (in limited circumstances) Employee discount program Friendly work environment $500.00 monthly tool allowance Qualifications Certified auto technician needed to perform Maryland safety vehicle inspection for our used car department must have a least 1 yr experience as a Maryland state inspector Valid Driver's License Maryland State Inspectors License Previous experience required Willing to to submit to a drug screen and background check prior to employment B level qualifications, including Diagnostic, Electrical and Engine Repair Excellent customer service skills Basic Computer skills Team player Ability to learn new technology, repair and service procedures and specifications Able to operate electronic diagnostic equipment Responsibilities Conducts vehicle inspections for mechanical services Assist in the Tire installation, balancing, and repairing Perform schedule maintenance services on vehicles Perform work specified on the repair order with efficiency and in accordance with dealership Test-drive vehicles, and test components and systems, using diagnostic tools and special service equipment Diagnosing, maintaining, and repairing vehicle automotive systems including engine, transmission, electrical steering, suspension, brakes, air conditioning, etc Communicate directly with the Service Advisor so that customers can be informed if any additional service is needed Providing an estimate of time needed for additional repairs Executing repairs under warranty to manufacturer specifications Apple Auto Mitsubishi employees can enjoy a family work environment that cares for its employees and offers a full range of benefits and a competitive pay structure. Apple is looking for employees to help our growing business. We are looking for candidates for every department in our dealership. We are an equal opportunity employer and prohibit discrimination/harassment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

This is a Full Time Lane Inspector Position. Opus is a world-leading vehicle inspection and intelligent vehicle support company that has been contributing to a safer and cleaner world since the company was founded in 1990. We take pride in helping make our world a safer and cleaner place. Duties and Responsibilities: Lane Inspector - Vehicle Emissions testing. You will play an important role in limiting the production of Emissions by identifying the polluting vehicles. As a lane inspector, YOU will be responsible for the following: Perform emission inspection functions following established procedures, and enter and verify vehicle information with computer data. Operate vehicles during the emissions system test and use exhaust analysis equipment. Direct motorists in and out of the station, provide test results, instruct customers on next steps in the inspection process, and collect inspection fees. Other job duties as assigned. No experience required; we will train you! Requirements: Must be 18 years of age. Valid and unrestricted driver's license. Physically able to stand, bend, stoop, kneel, and balance unassisted for extended periods of time. Physically able to lift, push, and pull up to 20 lbs on an occasional basis. Basic computer skills. Full-time hours requirement is 40 hours a week. Qualifications: Team player. Excellent customer service skills. Ability to work efficiently and multitask in a fast-paced, busy shop environment with a smile and positive attitude. Work in an environment that includes vehicle exhaust fumes, noise, and heat. Work in all weather conditions. Work safely around operating motor vehicles. All offers of employment are contingent upon completing and meeting the criteria of a background check, drug screening, and I-9 verification.

Company Cox Automotive - USA Job Family Group Vehicle Operations Job Profile Mobile Inspector II Management Level Individual Contributor Flexible Work Option Can work remotely anywhere in the specified country Travel % No Work Shift Day Compensation Hourly pay rate is $14.90 - $22.40/hour. The hourly rate may vary within the anticipated range based on factors such as the ultimate location of the position and the selected candidate's experience. In addition to the hourly range identified herein, this role is also eligible for an annual incentive/commission target of $6,000.00. Job Description A Mobile Inspector II functions as a member of the Manheim mobile inspections team for a designated region with the primary responsibility of conducting vehicle condition inspections on a client's lot. Their core skill is to provide accurate and complete documentation of overall vehicle condition within the parameters of a Manheim inspection. This position will build trust with Clients, engage to help them see the value in the Manheim Marketplace, and to request more inventory to be inspected by providing quality and timely inspections. As a Mobile Inspector II, it is expected to perform tasks with minimal guidance and supervision, while demonstrating growing independence and problem-solving skills. Primary Duties & Key Responsibilities * Conduct a thorough vehicle inspection. * Locate, start, move, inspect, and return vehicles on dealer/clients' lot safely. * Verify vehicle identification and enter accurate vehicle information into the inspection system to correct VIN, mileage, and sub series. * Inspect vehicle equipment and options, documenting results including damage, missing or inoperable items. * Inspect and record vehicle exterior condition, including but not limited to tires, frame, glass, panels, and mechanical components. * Inspect and record the vehicle interior condition, including but not limited to seats, dashboard, and options. * Perform basic mechanical checks on vehicles including powertrain, drivetrain, and electrical components. * Prepare and provide daily activity reports for management. * Be able to pivot and adapt to changes in daily appointments to ensure efficiency and effectiveness of each dealer visit * Develop strong knowledge of clients in territory and work together with partners to keep them active with Manheim mobile inspections through regular, pro-active on lot engagement * Receive data and insight from partners and leverage to maximize volume of units inspected on dealer lots. * Represent Cox Automotive as a brand ambassador and provide premier client experience by interfacing regularly core clients and ensuring satisfaction. * Functions as a solid team player and works closely with the Wholesale Specialist team, peers, other Manheim workgroups and auctions. * Utilize SalesForce.com for reporting, lead input and customer performance reviews. * Understanding NAAA Frame/Structure Damage Policy. * Will work in a continuous improvement/Lean environment and encouraged to drive a lean culture. * Maintain production expectations set by the leader. * Visibly demonstrate safety commitment by following all safety and health procedures and modeling the behaviors related to such. Actively participate in support of all safety activities aligned with Safety Excellence. * Other duties as assigned. Required Experience & Specialized Knowledge and Skills * High School Diploma/GED required. * 3 years of any automotive related experience. * Valid driver's license and safe driving record required. * Travel 100% - Reliable transportation required. Reimbursement program dependent on number of miles driven. * Good communication and interpersonal skills required. * Strong technical aptitude. * Must be detail orientated. * Experience in navigating handheld and other documentation devices preferred. * Motivated to work independently with remote supervision. * Ability to multitask, follow directions and take instruction is required. * Body, paint, and mechanical repair knowledge helpful. * Familiarity with unibody and full-frame helpful. * Ability to lift and hold at least 30 lbs. at waist level for an extended period of time. * Regularly required to stand, walk, talk, and hear. * Frequently required to crouch, bend, and kneel to look at side or underneath car. Strength to lift hood or trunk. Bend while performing audits. Reach inside or underneath vehicle. * Near vision abilities required to find dings and scratches, paint work, hail damage, frame/unibody, other exterior damage and Interior damage. Able to identify exterior or interior colors. * Ability to deal with different lighting (i.e. exterior and interior lighting, natural and artificial light) * Requires physical ability and mental acuity to execute the duties of the position successfully within required timeframes to meet business requirements. MCCOX Drug Testing To be employed in this role, you'll need to clear a pre-employment drug test. Cox Automotive does not currently administer a pre-employment drug test for marijuana for this position. However, we are a drug-free workplace, so the possession, use or being under the influence of drugs illegal under federal or state law during work hours, on company property and/or in company vehicles is prohibited. Benefits Employees are eligible to receive a minimum of sixteen hours of paid time off every month and seven paid holidays throughout the calendar year. Employees are also eligible for additional paid time off in the form of bereavement leave, time off to vote, jury duty leave, volunteer time off, military leave, and parental leave. About Us Through groundbreaking technology and a commitment to stellar experiences for drivers and dealers alike, Cox Automotive employees are transforming the way the world buys, owns, sells - or simply uses - cars. Cox Automotive employees get to work on iconic consumer brands like Autotrader and Kelley Blue Book and industry-leading dealer-facing companies like vAuto and Manheim, all while enjoying the people-centered atmosphere that is central to our life at Cox. Benefits of working at Cox may include health care insurance (medical, dental, vision), retirement planning (401(k)), and paid days off (sick leave, parental leave, flexible vacation/wellness days, and/or PTO). For more details on what benefits you may be offered, visit our benefits page. Cox is an Equal Employment Opportunity employer - All qualified applicants/employees will receive consideration for employment without regard to that individual's age, race, color, religion or creed, national origin or ancestry, sex (including pregnancy), sexual orientation, gender, gender identity, physical or mental disability, veteran status, genetic information, ethnicity, citizenship, or any other characteristic protected by law. Cox provides reasonable accommodations when requested by a qualified applicant or employee with disability, unless such accommodations would cause an undue hardship. Applicants must currently be authorized to work in the United States for any employer without current or future sponsorship.

The NDT Advanced Services CWI Inspector is responsible for performing visual inspections on welded products and structures to ensure that work produced by welders meets specifications in NDT services. Essential Job Functions * Maintains a safe, secure and healthy environment by adhering to Company/Customer safety standards and practices and to legal regulations, alerting others regarding potential hazards or concern * Performs all duties as assigned and adheres to TEAM's Core Values. * Performs internal and external inspections to determine if welded products and structures meet the acceptance criteria of a specific code, standard or document. * Properly interprets regulations, codes, and industry standards. * Ensures work is implement as required by project specifications. * Compiles and submits completed inspection reports in a timely manner. * Completes the Inspection, Test Plan and status report. * Reviews surveillance documents for any issues. * Schedules and conducts Pre-Inspection Meetings. * Communicates regularly with customers on scheduling activities as detailed by the customer. * Plans travel and surveillance activities/ visits to effectively utilize time and minimize expenses. * Maintains the Inspection Folder. Job Qualifications * High school diploma or equivalent preferred * Previous industry related inspection experience preferred. * SCWI, CWI or CAWI certification required. * Must be able to pass a Vision Test. * Travel Requirements: 0% - 50% Work Conditions * Position is based out of a branch or site location. * Field duties require indoor and outdoor work in a plant atmosphere * Interaction with other crew employees, as well as supervisors and client personnel * Working in plant and/or shop areas around production machinery with extreme noise levels * Must be able to wear safety equipment as required by the safety department for personal protection * May be at more than one job site in a day and must be able to tolerate climate changes * May be required to travel out of town on a periodic basis Physical and Mental Requirements * Ability to lift and carry 75 pounds * Must be able to walk and climb except when performing non-field duties * Sufficient clarity of speech and hearing or other communication capabilities, with or without reasonable accommodation, which permits employee to communicate effectively * Sufficient vision or other powers of observation, with or without reasonable accommodations, which permits employee to investigations * Sufficient manual dexterity with or without reasonable accommodation, which permit the employee to perform routine office duties * Sufficient personal mobility and physical reflexes, with or without reasonable accommodations to perform office duties and travel when necessary to off-site locations * Sufficient personal mobility to maneuver within a refinery or plant environment to include the ability to gain access to elevated platforms via ladders and stairwells * Ability to maintain focus and multitask effectively * Excellent communication skills * This job description is intended to indicate the kinds of tasks and levels of work difficulty required of the position given this title and shall not be construed as declaring what the specific duties and responsibilities of any particular position shall be. It is not intended to limit or in any way modify the right of management to assign, direct and control the work of employees under supervision. The listing of duties and responsibilities shall not be held to exclude other duties not mentioned that are of similar kind or level of difficulty. TEAM Industrial Services, Inc. strictly prohibits discrimination against applicants, employees, or any other covered persons because of race, color, religion, creed, national origin or ancestry, ethnicity, sex, gender, age, physical or mental disability, citizenship, past, current or prospective service in the uniformed services, genetic information, or any other characteristic protected under applicable federal, state or local laws. TEAM's Core Values Safety First / Quality Always - In everything we do Integrity - Uncompromising standards of integrity and ethical conduct Service Leadership - Leading Service Quality, professionalism and responsiveness Innovation - Supports continuous growth and improvement Pride and Respect - For our customers, for each other and for all our stakeholders Teamwork - Global teamwork and collaboration

SUMMARY: This position completes all or any combination of, inspection and/or testing tasks required to ensure that manufactured items conform to company and industry quality standards as well as to contract specifications when required. These duties require a high degree of accuracy and attention to detail. SPECIFIC DUTIES/RESPONSIBILITIES: * Inspects and measures materials, products, and work for conformance to specifications and standards throughout the manufacturing cycle. * Accurately uses all standard measuring tools, including, but not limited to, rulers, calipers, and force gauges. * Interprets blueprints, data, and other materials to determine specifications, inspection and testing procedures, and measuring instruments required. * Records inspection data and quantities inspected on required inspection reports. * Collects and files inspection and test records in accordance with established record maintenance procedures. * Notifies supervisors and other personnel of production quality problems and assists in identifying and correcting these problems * Discusses inspection results with those responsible for products and recommends necessary corrective actions. * Completes all required record keeping, including time sheets, traceability forms, etc. * Understand part numbers and revision levels * Inspects customer repairs as needed. * Assist with the training of new inspectors as needed * Performs other related duties as required or assigned. * Follows company rules and procedures. QUALIFICATIONS: * 1 to 2 years quality inspection experience in manufacturing. * Functionally literate including able to read and write English documents. * Able to perform basic computations (add, subtract, multiply, divide in all units of measure using whole numbers, fractions, and decimals). * Capable of accurately using standard measuring tools. * Capable reading and interpreting manufacturing drawings and work specification sheets. * Detail oriented and able to maintain high accuracy standards. * U.S. citizen, permanent resident alien or otherwise able to review all export-controlled technical information EXPERIENCE: Six months to one year experience as a QC inspector in a manufacturing environment EDUCATION: High school diploma or GED WORK ENVIRONMENT: The work environment for this job is a manufacturing shop floor. The noise level is usually moderate due to sewing machines and traffic. PHYSICAL DEMANDS: The position requires that the employee is regularly required to sit, talk, and hear. The employee is frequently required to use hands to fingers such as with a keyboard. The employee is occasionally required to stand; walk; reach with hands and arms. The employee must regularly lift and/or move up to 10 pounds. The employee must occasionally lift and/or move up to 25 pounds without assistance. Specific vision abilities include close, distance, and color vision and the ability to adjust focus. SALARY RANGE: $18.45 - $20.64 / hour Apply / Submit Your Resume Your Name* Your Email* Additional Information (optional) (Word file or PDF only) Max file size: 5MB Upload your resume* Please type the characters* This helps us prevent spam, thank you. Business Email* Submit

Performs inspection of aircraft, components, assemblies, tools or parts during modifications, installation, service, or overhaul to determine airworthiness, safety, or conformance to manufacturer's specifications, FAA accepted/approved data, and AS9100 Quality standards and requirements. This position will be based in Philadelphia, PA Essential Duties and Responsibilities: Duties and Responsibilities: % of Time 1. Performs inspection of aircraft, or parts during modifications, installation, or overhaul and is accountable for the determination of airworthiness, safety, and conformance to FAA accepted/ approved data, Company standards, and AS9100 requirements. 30 2. Interprets and checks engineering drawings for applicability to work scope, both hard copy and electronic, engineering change orders, FAA regulatory procedures, processes, and specifications. 10 3. Reviews engineering technical data for major alterations and major repairs. Documents in detail a description of the work accomplished on a FAA form 337. Determines whether a major repair or major alteration will require a field approval and submit FAA Form 337 to the FAA for a field approval. Responsible for writing Instructions for Continued Airworthiness (ICA's) maintenance work instructions on FAA Form 337. 5 4. Performs review of work orders for completeness, required repair station dedicated forms, and any other mandatory documents. 5 5. Performs research of FAA, EASA, and other foreign civil aviation authorities Airworthiness Directives (AD's). Creates and documents a dedicated compliance list for customer aircraft records. 5 6. Returns aircraft and aircraft parts to service in accordance with 14 CFR Part 43.9 or 14 CFR Part 43.11 by creating and signing an aircraft logbook entry, or completing a FAA Form 8130-3 for aircraft parts. Creates and updates customer aircraft records. 15 7. Interfaces with FAA Safety Inspectors during FAA audits of the Repair Station. 5 8. Supervises the work performed on site, and is responsible for ensuring that the appropriate work instructions are followed, and is responsible for the overall quality of the work performed for travel events (work away from the repair station). 5 9. Liaise with company Technical Representatives and Customer Support Managers for all matters relating to Quality concerning customer aircraft or parts. 5 10. Performs data collection and performs conformity inspections during the development of a STC project. Performs conformity inspections to fabricated parts by a vendor or in-house to ensure part meets engineering design requirements. 5 11. Prepares data package and presents to FAA for any aircraft certification changes. 5 12. Performs other duties and fulfill other responsibilities as assigned. This includes working as an aircraft maintenance technician if required. 5 TOTAL: 100% Qualifications for Position: Education High school diploma (or equivalent) College degree or Technical writing a plus Experience Minimum 5 years hands-on quality control inspector on turbine helicopters in a Part 145 Repair Station environment 5 years hands-on turbine helicopter maintenance experience AgustaWestland A109/A119/AW139/AW169/AW189 maintenance experience is a plus Competencies & Attributes Technical knowledge in the fields of mechanics, hydraulics, electricity, avionics, sheet metal, rigging, instruments, test flights, etc. to determine safety, airworthiness, conformance, and sign off work in aircraft records to meet the requirements of the FAA Federal Aviation Regulations Must be pro-active and team and detail oriented. Must have good working knowledge of FAR Part 145 and related areas. Must possess experience in Microsoft Office suite. Must be able to work independently Ability to travel occasionally. Ability to work weekends and/or be on-call. Licensure/Certification FAA A&P license a must, and Inspection Authorization (IA) rating is a plus Equal Opportunity Employer/Vet/Disability

Job Description At Amuneal, each product we create is influenced by exploration, research, investment, and a never-ending focus on the highest quality materials, cutting-edge technologies, and skilled craftsmanship. With nearly 60 years of experience, Amuneal operates two divisions in Philadelphia, each with a focus on the highest quality products, fed by a strategy focused on diversification. Amuneal's Technical Products Division is the country's largest and most respected supplier of magnetic shielding, while our award-winning Custom Fabrication Division creates original designs for high-end residential and commercial interiors. Amuneal Manufacturing is seeking a dedicated Quality Control Inspector to join our fast-paced, dedicated, and extremely talented team. Candidates should bring in a high level of excitement and punctuality. They will be responsible for performing set-up and production operations on projects of a wide variety, while maintaining standards for safety & quality. This role will operate on a 4 day, 10 hour work week of 6:00AM-4:30PM Monday-Thursday Responsibilities: Inspect - Conduct routine and non-routine inspection of materials at incoming, in-process, and final. First Article Inspection when required by the customer or quality management. Inspect - Perform tests, interpret test results, compare them to established specifications and control limits, and make recommendations on appropriateness of data/material for release. Calibration - Maintain inspection equipment in accordance with Amuneal's internal procedures and any relevant customer specifications. Document - Ensure drawings, work instructions, and procedures are maintained to current revision and accessible. Audit - Perform routine internal audits of processes and persons, as directed by relevant management. Train - Provide training and guidance to junior members of the Quality team. This includes the provision of oversight, and implementation of disciplines when it is necessary, as well as reporting on progress, or lack thereof, to relevant management. Straighten: Arrange items that are needed so that they are ready & easy to use. Clearly identify locations for all items so that anyone can find them & return them once the task is completed. Shine: Clean the workplace & equipment on a regular basis to maintain standards & identify defects. Standardize: Revisit the first three of the 5S on a frequent basis to maintain standards & identify defects. Sustain: Keep the rules to maintain the standard and continue to improve every day. Qualifications: High School Diploma/ GED required. Associates Degree, Bachelors Degree, or Technical school preferred. Knowledge of ISO 9001 Ability to read and understand blueprints Technically apt, with experience using Microsoft Suites. Use of CMM/ FARO Arm Preferred. Our work is custom in nature and highly evolving. As part of a team, you will work on a diverse set of challenging projects. Applicants should have experience and be able to thrive both in a collaborative setting and on solo tasks. This role offers a competitive salary in addition to inclusion in the company's profit sharing, 401K, medical, and dental programs. Benefits: 401(k) 401(k) matching Dental insurance Flexible schedule Health insurance Life insurance Paid time off Referral program Vision insurance Schedule: 4 Day Work Week Weekends as needed Ability to commute/relocate: Philadelphia, PA 19124: Reliably commute or planning to relocate before starting work (Required)

At R-V Industries, our work is much more than designing and building world-class industrial process equipment. Not only are we impacting everyday life in the world we serve, but we are providing a quality of life for our employees and their families. Every day, we come together to build stronger relationships with our vendors, our customers, and each other, so we can solve challenging problems, and continue to improve the safety, quality, and efficiency of all that we do. Caring matters at R-V. We care for each other, our safety, our quality, our learning, and our growth. We seek out diversity of thought, experience, and strengths in individuals, so we can continue to innovate as a team. We believe when we bring our true full selves to serve others, it elevates the quality of life for all. As with all s at R-V, this job is considered safety-sensitive. GENERAL JOB DESCRIPTION We are seeking an experienced Quality Inspector to join our team at our Honey Brook and Morgantown, PA locations. This position is responsible for providing day-to-day quality engineering support within our General Fabrication, ASME Section VIII, and NQA-1 markets. This position will play an integral role in the growth and improvement of the RVII organization through elevating first pass quality, increased project throughput, on-time delivery, and project expectations. DUTIES/RESPONSIBILITES Provide technical support to RVII manufacturing facilities Supports gathering and presenting key KPI measurements to the organization Participate in pre-job contract review. Develop and implement inspection and test plans for manufactured and purchased components Interface with vendors to ensure timely resolution of Quality non-conformances Conduct internal quality system process audits Coordinate and host outside inspection agencies and customer inspectors Prepare, revise, and implant Quality System procedures, policies, and work instructions Conceptualize and analyze designs to ensure technical outcomes are consistent with customer and company specifications Perform non-destructive and dimensional inspections in accordance with approved procedures, customer specifications, and governing codes. Maintain control and maintain an inventory of non-conforming products. Review contracts to determine deliverables and ensure compliance with specifications Plan, schedule, and coordinate NDE Inspection activities daily in conjunction with the manufacturing department. Maintain adherence with all M&TE requirements, testing requirements, and procedures SKILLS/QUALIFICATIONS NDE (Non-Destructive Evaluation) qualifications - minimum of Level II in VT/MT/PT/BLT/UT-T Must possess a valid American Welding Society - Certified Welding Inspector credential Must have advanced knowledge of ASME Y14.5 specification Must have fundamental knowledge of ASME Sections VIII and V Prior experience with ASME NQA-1 and 10CFR50 Appendix B preferred Ability to work independently and direct coworkers Bachelor's degree in engineering or quality related field with 2+ years of experience or 10+ years in Quality Control role Strong verbal and written communication skills Self-motivated with attention to detail and accurate reporting Proficient in MS Office suite products EDUCATIONAL/PHYSICAL REQUIREMENTS Two- or four-year college degree or relevant experience in inspection activities Everyday bending, crouching, stooping, standing, and overhead reaching Everyday exposure to moving machinery, dust, dirt, grease or other disagreeable elements Lifting up to 50-75 lbs. Must be able to pass and complete a physical assessment Must be able to perform the essential functions of the job with or without accommodation R-V Industries, Inc. is an equal opportunity employer. R-V Industries, Inc. is an equal opportunity employer. Monday-Thursday 6:00 am - 4:00 pm

Salary: Do you want to work for a construction company unlike any other? At JGM, we challenge the industrys status quo. Known as the team that delivers When You Need It Yesterday, weve built a culture around safety, quality, and speed. At JGM, were more than a company-were a family. Working side by side, we support one another, building trust by knowing we can count on each other. Driven by our core values, mission, and purpose, we stay focused on our vision for the future. The result? A team environment that fuels exceptional employee satisfaction, which in turn drives extraordinary client experience and continued company growth. The only question is: Are you ready to join our growing family and be part of something truly special? Be an integral part of the JGM family by living our core values: We Plan. We Adapt. We Succeed. Uncompromising Safety & Quality. Family is Our Foundation. Create Value Through Better Solutions. Whatever it Takes. Commitment to Self-improvement. Our Purpose (FOREVER): Develop Elite Leaders Today, So We Can Build Tomorrows Future Our Vision (ONE DAY): Driven to be the Safest, Fastest, and Most Effective Industrial Construction & Fabrication Partner in North America Our Mission (TODAY): Solve Our Clients Toughest Challenges with Safety and Quality Top of Mind Position Overview JGM is seeking a talented QC Inspector to join our growing team! The perfect candidate is a professional who thrives on tackling challenges in an exciting, fast-paced environment. This position will inspect raw materials, in-process work and finished products for conformance to shop drawings, specifications, and codes by performing the below duties. Responsibilities Conduct complete layout inspections, measuring dimensions (length, height, angles, radii, etc.) using precision instruments (micrometers, calipers, gauges, etc.) to ensure compliance with drawings, specifications, and codes. Verify quality at all stages: incoming materials, in-process work, and final products. Visually inspect parts, welds, bolts, coatings, and assemblies; compare pieces to detect variations; enforce standards and legal requirements. Interpret and apply shop drawings, specifications, ASTM codes, AISC standards, DOT requirements, and welding/bolting/painting codes. Maintain accurate inspection records, defect lists, and calibration of measuring equipment; coordinate with departments to resolve quality issues. Support operator training on measurement, visual acceptability, and processes; assist with internal and external audits. Manage NDE (Non-Destructive Examination) training, testing, certification, and documentation; maintain CWI certification. Review and approve quality-related purchase orders, reports, and testing requirements. Assist in developing procedures, quality summaries, and corrective actions; enforce non-conformance protocols. Serve as liaison with outside inspectors; investigate shop/field errors and support resolutions. Perform other QA-related tasks as required by supervision. Qualifications Strong knowledge of welding symbols and diagrams, and inspection tools. Highly proficient in reading blueprints and other printed instructional material. Basic Math & Geometry/Trigonometry. Familiar with variety of weld processes: Flux Core Arc Welding (FCAW), Sub Arc Welding (SAW), Gas Metal Arc Welding (GMAW), and/or Gas Tungsten Arc Welding (GTAW) Ability to perform and document inspection activities during fabrication and welding of structural piece members. Microsoft Office. CWI preferred. Self-motivated, collaborative team member. Safety focused. Operates equipment and champions safety initiatives. Education High School Degree or GED Equivalent preferred Minimum of seven years related experience and/or training in steel fabrication; or an equivalent combination of higher education and experience in the steel fabrication industry or closely related fields. Physical Requirements The demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Requires prolonged walking, standing, sitting, bending, squatting, stooping, climbing, regular lifting and carrying to move up to 50 lbs., talking, hearing, reaching, feeling, grasping, and push/pulling. Must be able to work in various weather conditions/temperatures. Regular mental and visual attention much or all the time with manual coordination. General office environment conditions. Flexibility required to travel. JGM offers a competitive wage and benefit package: Participate in the companys yearly performance bonus program Medical, Vision & Dental PTO & Holidays 401(k) + Matching Life Insurance Short/Long-Term Disability Employee Assistance Program Generous Referral Program Training and Further Education This job description is subject to change based on the needs of the business and is notall-inclusive. JGM is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

The Quality Control Inspector I is responsible for inspecting, testing, and auditing raw materials and finished products, as well as releasing finished products. Attention to detail is an expectation. Demonstration of commitment to patient safety and product quality by maintaining compliance with the Quality Policy and all other documented quality processes and procedures. Inspect and release raw materials, components, sub-assemblies, and finished devices according to procedure. Drives continuous improvement activities with cross-functional team members. Generate non-conformances and escalate to the Material Review Board in a timely manner. Interacts with production areas, manufacturing and design engineering, marketing, quality, and management. Job Duties: Promotes a work environment of continuous improvement that supports CQ Medical's Quality Policy, Quality System, and the appropriate regulations. Assists with communicating business-related issues or opportunities for improvement to management. Accountable for compliance with applicable US and International regulations and directives including, but not limited to, Food & Drug Administration (FDA), Canadian and European Union regulations. Works in a team environment to achieve metrics. Interprets engineering drawings, schematic diagrams, sampling tables, or formulas and confers with management or engineering staff to determine quality and reliability standards. Selects products for tests at specified stages in production process, and tests products for variety of qualities such as dimensions, performance, mechanical, or chemical characteristics. Records test data, applying statistical quality control procedures using GMP documentation practices. Recommends modifications of existing quality or production standards to achieve optimum quality within limits of equipment capability. Quarantines all incoming material until testing is accepted. Quarantines all non-conforming material during any step of the manufacturing process until the Material Review Board dispositions the material. Purging of records as required. Maintains a neat and organized work area. Remains current on all required training. Conducts calibrations and works with 3 rd party calibration providers to ensure inspection equipment meets specifications. Conducts transactions in the Quality Management System and/or ERP system to detail the disposition of incoming and in-process materials. Working Conditions: 50 lbs. of lifting required for this role Hearing protection, safety glasses, safety shoes, and gloves are required for this role Required exposure to biohazard Job Qualifications: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of auditors or employees of our organization. Ability to interact effectively with individuals and teams. Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, percent, and interpret bar graphs. Decision-making ability. Ability to use testing equipment. Must be able to manage multiple tasks and perform with accuracy and a high attention to detail. Ability to identify priorities and function independently required. Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Identify various discrepancies (product, process, documentation, etc.) Analytical and problem-solving skills. Computer proficiency, including data entry. MS Office Suite (Word, PowerPoint, and Excel) experience required. Education and/or Experience High school diploma or general education degree (GED). Medical device or manufacturing experience a plus. Preferred demonstration of leadership.

Looking to Supplement Your Income or Just Be Productive? Become an Independent Residential Insurance Inspector with CIS Group! Are you looking for a flexible, rewarding opportunity that allows you to be your own boss and take control of your schedule? CIS Group is seeking motivated, detail-oriented individuals to join our team as 1099 Property Insurance Inspectors. If you own an LLC and are looking to diversify your work, this might be the perfect opportunity for you! Why Work With Us? Since 1996, CIS Group has been one of the largest and most trusted names in the insurance inspection industry. We offer a platform that allows Independent Contractors to create and grow their own businesses, work flexible hours, and take on a variety of inspections. Whether you're supplementing your current work or looking for a new venture, this position offers flexibility and autonomy. What You'll Do: Travel to residential homes to complete exterior (interior photos here and there) property inspections. Take photos, collect property data, and upload your findings using your smartphone or tablet. Provide high-quality, professional service that delivers accuracy and on-time service, with exceptional communication. Maximize this opportunity by utilizing your unique skillset Watch this video to see an example of an exterior-only inspection: Click here to watch What We're Looking For: 1099 Independent Contractors - Be your own boss, set your own schedule! Flexible Hours - Work during daylight hours, Monday through Saturday. Comfortable Working Outdoors - This role requires you to work in various weather conditions. Tech-Savvy - A recent smartphone or tablet capable of taking and storing hundreds of photos. Computer Access - Wi-Fi-enabled for uploading data. Reliable Vehicle & Driver's License - Travel to residential properties within your area. Strong Communication Skills - You're a professional and a persistent communicator. You're not someone who just disappears when things get tough. Microsoft Excel Familiarity - Basic computer skills are necessary for managing your inspections. Compensation: Independent Contractors - You get paid per inspection. Fees - Vary based on location and inspection type, allowing for higher earning potential as you demonstrate competency. Why This Is Perfect for You: You've taught yourself how to solve problems and take on new challenges, and you're driven to succeed no matter the obstacles. This opportunity will allow you to create and or build your own business, and the flexibility to grow your income in an industry that remains resilient even through economic downturns. Ready to take control of your future and join a company that values your persistence and resourcefulness? Submit your resume now and become part of the CIS Group team! Pay = $990 monthly working 6 days per month

At Amuneal, each product we create is influenced by exploration, research, investment, and a never-ending focus on the highest quality materials, cutting-edge technologies, and skilled craftsmanship. With nearly 60 years of experience, Amuneal operates two divisions in Philadelphia, each with a focus on the highest quality products, fed by a strategy focused on diversification. Amuneal's Technical Products Division is the country's largest and most respected supplier of magnetic shielding, while our award-winning Custom Fabrication Division creates original designs for high-end residential and commercial interiors. Amuneal Manufacturing is seeking a dedicated Quality Control Inspector to join our fast-paced, dedicated, and extremely talented team. Candidates should bring in a high level of excitement and punctuality. They will be responsible for performing set-up and production operations on projects of a wide variety, while maintaining standards for safety & quality. This role will operate on a 4 day, 10 hour work week of 6:00AM-4:30PM Monday-Thursday Responsibilities: Inspect - Conduct routine and non-routine inspection of materials at incoming, in-process, and final. First Article Inspection when required by the customer or quality management. Inspect - Perform tests, interpret test results, compare them to established specifications and control limits, and make recommendations on appropriateness of data/material for release. Calibration - Maintain inspection equipment in accordance with Amuneal's internal procedures and any relevant customer specifications. Document - Ensure drawings, work instructions, and procedures are maintained to current revision and accessible. Audit - Perform routine internal audits of processes and persons, as directed by relevant management. Train - Provide training and guidance to junior members of the Quality team. This includes the provision of oversight, and implementation of disciplines when it is necessary, as well as reporting on progress, or lack thereof, to relevant management. Straighten: Arrange items that are needed so that they are ready & easy to use. Clearly identify locations for all items so that anyone can find them & return them once the task is completed. Shine: Clean the workplace & equipment on a regular basis to maintain standards & identify defects. Standardize: Revisit the first three of the 5S on a frequent basis to maintain standards & identify defects. Sustain: Keep the rules to maintain the standard and continue to improve every day. Qualifications: High School Diploma/ GED required. Associates Degree, Bachelors Degree, or Technical school preferred. Knowledge of ISO 9001 Ability to read and understand blueprints Technically apt, with experience using Microsoft Suites. Use of CMM/ FARO Arm Preferred. Our work is custom in nature and highly evolving. As part of a team, you will work on a diverse set of challenging projects. Applicants should have experience and be able to thrive both in a collaborative setting and on solo tasks. This role offers a competitive salary in addition to inclusion in the company's profit sharing, 401K, medical, and dental programs. Benefits: 401(k) 401(k) matching Dental insurance Flexible schedule Health insurance Life insurance Paid time off Referral program Vision insurance Schedule: 4 Day Work Week Weekends as needed Ability to commute/relocate: Philadelphia, PA 19124: Reliably commute or planning to relocate before starting work (Required)