Inspector jobs in Greeley, CO - 136 jobs

This is a Full Time Lane Inspector Position. Opus is a world-leading vehicle inspection and intelligent vehicle support company that has been contributing to a safer and cleaner world since the company was founded in 1990. We take pride in helping make our world a safer and cleaner place. Duties and Responsibilities: Lane Inspector - Vehicle Emissions testing. You will play an important role in limiting the production of Emissions by identifying the polluting vehicles. As a lane inspector, YOU will be responsible for the following: * Perform emission inspection functions following established procedures, and enter and verify vehicle information with computer data. * Operate vehicles during the emissions system test and use exhaust analysis equipment. * Direct motorists in and out of the station, provide test results, instruct customers on next steps in the inspection process, and collect inspection fees. * Other job duties as assigned. No experience required; we will train you! Requirements: * Must be 18 years of age. * Valid and unrestricted driver's license. * Physically able to stand, bend, stoop, kneel, and balance unassisted for extended periods of time. * Physically able to lift, push, and pull up to 20 lbs on an occasional basis. * Basic computer skills. * Full-time hours requirement is 40 hours a week. Qualifications: * Team player. * Excellent customer service skills. * Ability to work efficiently and multitask in a fast-paced, busy shop environment with a smile and positive attitude. * Work in an environment that includes vehicle exhaust fumes, noise, and heat. * Work in all weather conditions. * Work safely around operating motor vehicles. All offers of employment are contingent upon completing and meeting the criteria of a background check, drug screening, and I-9 verification.

API 510, 570, 653 Inspector At the direction of the client, perform visual and non-destructive examinations of static and dynamic pressure retaining equipment in accordance with American Petroleum Institute (API) standard 570 and the American Society of Mechanical Engineers (ASME). Submit to client technically accurate reports documenting equipment condition. Provide client with technical recommendations for the repair, re-rate, replacement, and/or alteration of plant equipment, as required for safe operation within stated operating parameters for durations specified by client. Provide technical input to client as required for welding and metallurgical issues. Provide technical guidance, on an application of non-destructive examination techniques and procedures. Fully comply with all Xcel NDT and client safe work practices and actively participate in all site safety initiatives. Qualifications One of more API Certifications - API 510/570/653 Physical Demands and Work Conditions * Standing, walking, sitting, lifting, carrying, pushing, pulling, reaching, handling, fingering, feeling, talking, hearing, visual acuity, accommodation and color vision * Moving, carrying, lifting, objects in excess of 50 lbs * Climbing and working off of ladders, stairs, and scaffolding in excess of 100 ft * Working extended hours and standing for extended periods of time * Work in indoor and outdoor environments in conditions of extreme heat and cold * Work in and near industrial hazards.

Copart, Inc. a technology leader and the premier online vehicle auction platform globally, with over 200 facilities located across the world, Copart links vehicle sellers to more than 750,000 buyers in over 190 countries. We believe in providing an unmatched experience, every day and everywhere, driven by our people, processes, and technology. Proficiency in using digital photography equipment and basic computer skills required Strong attention to detail and the ability to accurately assess and document cosmetic damages Excellent communication skills, both verbal and written, with a customer-focused mindset 2 more items(s) Responsibilities As a Vehicle Cosmetic Inspector at BluCar, you will play a vital role in ensuring the accuracy and quality of vehicle descriptions presented to our customers You will be responsible for meticulously inspecting vehicles for cosmetic damages, accurately documenting findings, and contributing to the overall efficiency and success of our auction process Travel required to DFW for training 8 more items(s) More job highlights Job description General Description As a Vehicle Cosmetic Inspector at BluCar, you will play a vital role in ensuring the accuracy and quality of vehicle descriptions presented to our customers. You will be responsible for meticulously inspecting vehicles for cosmetic damages, accurately documenting findings, and contributing to the overall efficiency and success of our auction process. Essential Duties Travel required to DFW for training (What do you have to be able to do to achieve the desired results of your job? Include management and leadership responsibilities for work team leaders.) • Cosmetic Inspection: Conduct thorough visual inspections of vehicles to identify and document cosmetic damages, including scratches, dents, paint imperfections, and other aesthetic flaws. • Documentation: Accurately record inspection findings using Copart's proprietary software systems, ensuring that all relevant details are properly documented for transparent representation to potential buyers. • Photography: Capture high-quality photographs of vehicles, highlighting both their strengths and any cosmetic imperfections discovered during inspection, to provide comprehensive visual representations to buyers. • Quality Assurance: Maintain strict adherence to Copart's standards and guidelines for cosmetic inspections, ensuring consistency and accuracy in all assessments conducted. • Collaboration: Work closely with other team members, including Vehicle Inspectors, Auction Coordinators, and Customer Service Representatives, to facilitate seamless communication and support efficient auction operations. • Customer Service: Provide exceptional customer service by promptly addressing inquiries and concerns related to vehicle condition and cosmetic discrepancies, fostering positive relationships with both internal and external stakeholders. • Continuous Improvement: Actively participate in training sessions and educational opportunities provided by Copart to enhance your knowledge and proficiency in vehicle inspection techniques and industry best practices. MINIMUM REQUIREMENTS (What is required to perform the Essential Duties?) • High school diploma or equivalent required; additional education or certification in automotive technology or related field preferred. • Previous experience in automotive detailing, bodywork, or cosmetic inspection strongly preferred. • Proficiency in using digital photography equipment and basic computer skills required. • Strong attention to detail and the ability to accurately assess and document cosmetic damages. • Excellent communication skills, both verbal and written, with a customer-focused mindset. • Ability to thrive in a fast-paced environment and prioritize tasks effectively to meet deadlines. • Flexibility to adapt to changing priorities and willingness to collaborate as part of a dynamic team. Pay $27.33 - $30.76 per hour For 40 years, Copart has led its industry in innovation and customer service, enabling it to grow profitably in markets across the globe. Our success is the direct result of the skills and efforts of our talented and diverse employees. Our mindset? It's never just a "job" when your coworkers are like family - it's like coming home. Medical/Dental/Vision 401k plus a company match ESPP- Employee Stock Purchase Plan EAP - Employee Assistance Program Vacation & Sick Pay Paid Company Holidays Life and AD&D Insurance Along with many other employee Benefits. At Copart, we are focused on harnessing the power of diversity, inclusion, and collaboration. By embracing diverse perspectives, we open doors to innovation and unleash the full potential of our team. We are dedicated to fostering a workplace where everyone feels appreciated, included, and inspired to grow and contribute meaningfully. Posting End Date: 02-10-2026 At Copart, we are focused on harnessing the power of diversity, inclusion, and collaboration. By embracing diverse perspectives, we open doors to innovation and unleash the full potential of our team. We are dedicated to fostering a workplace where everyone feels appreciated, included, and inspired to grow and contribute meaningfully. E-Verify Program Participant: Copart participates in the Department of Homeland Security U.S. Citizenship and Immigration Services' E-Verify program (For U.S. applicants and employees only). Please click below to learn more about the E-Verify program: E-verify Participation Right to Work

Join RK as a Quality Inspector - Where Excellence Meets Opportunity At RK, quality isn't just a standard-it's our promise. As a Quality Inspector, you'll be the cornerstone of that commitment, ensuring every project meets the highest level of precision and craftsmanship. This is your chance to work alongside skilled professionals in both shop and field environments, contributing to diverse, impactful projects that shape industries. Self. Made. at RK At RK, Self. Made. isn't a tagline, it's how work gets done. People here build more than projects; they build capability, confidence, and careers they can be proud of. With so much work designed and fabricated in-house, ideas move quickly from concept to shop floor to job site. Teams collaborate across disciplines, solve real-world challenges, and grow through hands-on work that truly matters. RK Company Overview RK Industries is a second-generation family-owned company led by brothers Rick and Jon Kinning. With seven specialized business units working together, we deliver construction, fabrication, manufacturing, and building services with a focus on safety, quality, and craftsmanship. People join RK for the craftsmanship, complexity, and the ability to make a real impact. Our in-house capabilities mean employees see their ideas become real solutions, creating meaningful collaboration and clear visibility into how work gets built. Growth happens through challenging projects, mentorship from experienced builders, and opportunities that stretch your skill set. With RK University, accredited apprenticeships, competitive benefits, and deep community investment, RK offers the stability of a family-owned company with the opportunity and momentum of an industry leader. Position Summary The Certified Welding Inspector (CWI) is responsible for ensuring conformance with internal quality standards and external accreditation requirements (ISO 9001, AISC, and ASME). CWIs conduct inspections, support audits, and collaborate with production teams to ensure high-quality fabrication practices. This role plays a key part in maintaining certifications and creating a culture of continuous quality improvement. The role and responsibilities expand with each level of experience and competency. Role Responsibilities * Responsible for assessing corporate conformance to the Quality Management System (QMS), AISC Certification, and ASME Certification * Assist with all inspection and testing services provided by RK * Monitor activities relating to client expectations of the company. * Report QMS progress, activities, and observations to Quality Manager. * Review plans to ensure they meet building codes, local ordinances and zoning regulations * Monitor construction sites/fabrication facilities to ensure overall compliance * Use survey instruments, testing equipment, and other systems to ensure that product meets code and requirements * Verify alignment, level, and elevation of products * Keep daily logs, including photographs taken during inspection * Provide written feedback related to the findings * Other duties as assigned Qualifications * Indirect supervision. * Fully competent in all conventional aspects of subject matter or functional area. * Plans and conducts work requiring judgment in independent evaluation, selection and substantial adaptation/modification of standards. * Devises new solutions to problems encountered. * Independently performs most assignments with instruction * Receives guidance for unusual or complex problems and supervisor approval for changes in standards. * College/university graduate or equivalent combination of skills and experience generally expected for specified technical roles. * CWI Preferred Minimum Physical Requirements and Accountability * Work outside, inside, and in dusty, noisy and hazardous areas. * Work in high places, tight places, confined spaces and/or other adverse locations. * Climb, balance, squat, kneel and crouch. * Work in all types of weather. * Must have working knowledge of all trade materials and tools. * Ability to lift, move, and/or carry 50 lbs. What Sets RK Industries Apart * Safety: Our unmatched culture of safety is our foremost core value, guiding everything we do each day: Health, Safety, & Environmental * Awards: Whether in Construction, Manufacturing, Fabrication, or Service, RK Industries is highly recognized and accredited throughout the industry: Accreditations & Recognition * Benefits: RK Industries offers competitive benefits to support your growth and well-being: Benefits & Rewards * Philanthropy: RK Industries not only builds our community through our projects, but also invests in it by supporting local services for over a decade through the RK Foundation: RK Foundation * Development: Through RK University, we provide hands-on training and development opportunities that empower employees to advance their careers and grow within the company, to include leadership and technical learning opportunities, we well as our accredited apprentice program: RK University & RK Apprenticeship Program Applications are accepted on an ongoing basis

Job DescriptionSalary: $20/hr - $33/hr Primus Aerospace is a leading manufacturing partner to aerospace, defense & space OEMs / Primes & Tier I suppliers. The company specializes in producing high-tolerance, complex geometry parts; machined out of standard and exotic metals. Primus works directly with all major aerospace manufacturers (e.g., Boeing, Lockheed, Northrop) to provide components to mission critical civilian and defense programs. Job Purpose: The Quality Inspector performs inspections of product against customer requirements and according to internal procedures while maintaining the timely flow of product and minimizing escapes and other non-conforming materials. Quality Inspector Key Responsibilities and Accountabilities: Perform First Piece, Lot and Final Inspections against customer requirements Conduct in-depth review and able to properly interpret acceptance criteria in accordance with customer purchase order & specifications, including industry standards Command of problem solving techniques such as; 8D, Fish-Bone, 5-why & facilitate Team Based Root Cause Corrective Action(s). Define detailed in-process & final inspection plans Audit in process inspection reports/checklist on the production floor Perform and fill out AS9102 First Article Inspections and Inspection Reports Compile and confirm the accuracy of customer required shipment paperwork Understand and follow internal inspection procedures and maintain inspection records Proper tool selection based on tolerance zones Understand and maintain the ERP system per company policies Keep current with industry inspection techniques, practices and required standards Understand and stay current with industry standard inspection equipment; including calipers, micrometers, bore gauges, height gauges, indicators, etc. and the calibration and maintenance of these instruments Understand and stay current with GD&T standards, terminology and inspection methodologies Be willing to perform other duties as assigned (Calibration, Audits, CAPA, Customer Complaints, RMAs, etc.) At least 3-5 years practical experience in bench inspections and general practices and methodologies Requirements Experience with AS9100 and AS9102 Working knowledge of Special Processes Minimum of 3-5 years practical experience working with bench inspection processes and in-process inspections Working knowledge of Geometric Dimensioning and Tolerancing (GD&T) Strong time management Ability to work independently and meet deadlines Experience working in a manufacturing environment Good verbal and written communication Experience working with MS Excel and Word We offer comprehensive benefits including: Paid Time Off 401(k) with employer match Quarterly Incentive compensation Paid Holidays Medical, dental, vision & life insurance Short- and long-term disability IMPORTANT NOTICE: To adhere to U.S. Government international trade regulations, applicant must be a U.S. Citizen, or lawful permanent resident of the U.S. At Primus Aerospace, we are proud to be an Equal Opportunity Employer. We are committed to creating an inclusive environment that supports, respects, and celebrates all individuals. #zr #cj

Job DescriptionBenefits: Paid Training Fully Funded Certifications Opportunity for advancement Experienced Geotechnical Inspector Denver, CO $22$32/hr. (depending on experience) Full-Time | MondayFriday | 4050+ hrs./week | Overtime 1.5X Are you looking for a career where your work is hands-on, outdoors, and directly impacts the future of Denver's infrastructure? Join us as an Experienced Geotechnical Inspector and play a critical role in testing and evaluating materials for major commercial, residential, and infrastructure projects. This role is an excellent entry point into the geotechnical, civil, and construction materials testing industry, with clear opportunities for advancement. What Youll Do Collect and test soil, concrete, asphalt, and other construction materials Record GPS data and track site activities Operate drills, sampling equipment, and other field tools Stay activeworking outdoors, on your feet, and with your hands daily Travel between job sites and assist with lab testing Perform light data entry and documentation Why This Role Stands Out: Paid Training Earn while you learn, with raises tied to new certifications Fully Funded Certifications ACI, WAQTC, LabCat, CAPA (all covered by us) Career Growth Strong advancement opportunities into senior inspector or project management roles Perfect for Geology Graduates Apply your knowledge in real-world projects while building a long-term career path Impactful Work Contribute to Denver, CO growing skyline and infrastructure every day What Were Looking For: Valid drivers license with a clean record Ability to pass pre-employment background check and drug test Reliable transportation High School Diploma or GED required Must be 21+ years old

Job Description Final QC Inspector FLSA STATUS: Non-Exempt DEPARTMENT: Quality SUPERVISOR: Quality Engineering Supervisor DIRECT REPORTS: None. This position is responsible for inspecting, testing, and sampling assembled parts or products for defects, wear, and deviations from specifications. The Final QC Inspector will conduct tests and inspections of products or processes to evaluate quality and performance, utilizing precision measuring instruments and test equipment. Minimum Qualifications Education: High school diploma, GED, or equivalent qualification preferred. IPC/WHMA-A-610 or 620 certification preferred. Experience: Prior experience in quality inspection, Knowledge: Knowledge of IPC 610 and 620, ability to read and understand customer requirements and simple customer assembly drawings Extensive knowledge of components, connectors, terminals and mating connectors for fixture construction Skills: Ability to read wiring diagrams and engineering drawings, use of multi-meter, complex test equipment, force gages and calipers Must be able to read, write and speak English Must be able to recognize discrepancies on drawings and in customer requirements and bring them to the attention of leads, supervisors and/or management Job Responsibilities Conduct basic signature testing of cables, test beeping, terminal and solder inspection, simple high voltage and ground impedance testing. Perform data entry and complete associated paperwork, including inspection logs. Conduct complex high voltage and ground impedance testing and generate new signature profiles for assemblies. Write first article inspection reports and complete RMA evaluations. Perform simple fixture repair and construction. Organize existing assembly files and fixture database. Audit shelf-life, hazardous communication (hazcom), and calibration logs. Calibrate Cirris Signature Testers. Evaluate new complex assemblies and develop inspection plans. Work closely with Manufacturing to identify and resolve issues with new assemblies. Train new inspectors and acquire information/components for future inspection requirements. Collaborate with Engineering and Account Management on workflow needs. Perform general area cleanup and organization. Attend appropriate training and administrative meetings. Work with other departments to achieve company goals. Utilize communication skills necessary to execute company directives. Perform soldering, termination, plugging of connectors, heat shrinking, and comply with ESD assembly requirements. Other responsibilities, initiatives and ad-hoc projects as required. Internal and External Relationships Internal: Works closely with the Quality Engineering Supervisor, Manufacturing, Engineering, and Account Management teams to ensure product quality and process efficiency. Collaborates with production staff to identify and resolve quality issues. External: Interacts with customers and suppliers as needed to address quality concerns, ensure compliance with specifications, and support continuous improvement initiatives. May communicate with third-party testing agencies when required. Physical Requirements The physical demands described here are representative of those that must be met to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand, walk, and sit for extended period and must have the capability to lift up to 25 pounds. They must perform repetitive tasks and they must also have the ability to see details clearly at close range (within a few feet) and have precise coordination of fingers for grasping, manipulating, or assembling small objects. Overtime may be required based on production demands. The working environment is a standard manufacturing environment. The noise level in the work environment is usually low to moderate. Pay: $21-26/hr (varies based on experience)

Apply online at… ***************************************************************************** Are you considering a career in pest control or customer service? If so, a pest control career at Enviropest may be a perfect fit for you. We are growing, and it is an exciting time to join our team! We are looking for candidates who are dedicated, hard-working, and have a genuine passion for helping people. If this sounds like you, we would love to connect. Enviropest is proud to offer our employees a host of outstanding benefits! What You'll Get... We want to help our employees build a great career and a great future. At Enviropest, you'll have access to these great benefits! Health and Well-being: Blue Cross Blue Shield medical PPO options Delta Dental and Vision Prescription drug program Flexible Spending Accounts (FSA) for medical and childcare expenses Health Savings Plans (HSA) available with qualified plans Financial Security: Competitive hourly compensation with overtime above 40 hours 401(k) Savings Plans (Traditional & Roth) Life insurance and short-term disability 100% company paid (with options to buy up) Long-term disability, Accident, Critical Illness, and Hospital Indemnity insurance options Work/Life Balance: Enjoy stable, year-round employment with opportunities for growth Paid training Paid time off and eight paid holidays A peer-to-peer employee recognition program Opportunities for advancement What You'll Do... As a Sales Inspector, you will develop and maintain strong relationships with customers and ensure that their needs are met. You must have excellent communication skills in order to provide excellent customer service, build trust and loyalty with clients, prospect new commercial clients and resolve any issues that may arise. You should also possess strong problem-solving abilities in order to quickly identify the best solutions for customer issues. Who You Are... So, what does it take to be successful as a Sales Inspector with Enviropest? For starters, you'll have an inner drive to make the customer happy! You'll also have... Prospect new residential clients, build client lists, set meetings with new potential clients and provide proposals for new clients. Make treatment recommendations. Provide professional and expert advice to address customer's pest concerns. Negotiate all contracts with prospective clients. Meet or exceed sales goals. Attend company-provided sales courses designed to improve skills. Be responsible for timely and accurate reporting. Reporting will include sales calls made, proposals submitted, and disposition of prospects. Provide timely and accurate information and paperwork to the appropriate service center for rendering services sold. Excellent customer service skills Exceptional written and verbal communications Bilingual ability in English and Spanish (preferred) Comfort with learning and using new technology & software/apps (PestPac experience preferred) A self-motivated and competitive mindset with a desire to win Experience with and examples of problem-solving in a work environment The ability to thrive in a fast-paced environment The ability to effectively manage your time, prioritizing multiple tasks, maximizing performance while remaining customer-focused i.e. understanding customers' needs, handling objections, and closing business A high school diploma (Associate or higher preferred) Legal eligibility to work in the U.S. Have a valid driver's license and 3 years of driving experience Who We Are... From the very beginning in 1965, we've been a Colorado family-owned and operated pest control company, serving all of the Colorado Front Range with personable and professional service. Armed with a fleet of over 50 expertly trained service professional, utilizing the latest technology and techniques, you can be sure that your pest problems will be a thing of the past, quickly and affordably. Over the years, EnviroPest has obtained the elite status of the oldest and largest family-owned pest control company in Colorado. Our Hiring Process... Knowing what to expect when job hunting is always a welcome relief. Our process for this position includes the following steps: Application submission Short phone interview Schedule an interview and complete our full application Interview in person Emailed offer letter, which is contingent on step 6, tentative start date set Criminal background check/drug screening/reference check Official start date confirmed Welcome! Be Proud to call us your Employer Our exceptional customer service is a core Anticimex tradition, building on a long-standing history that has always valued personal interaction between us and our clients. We strive to understand the needs of our customers and adapt to them accordingly. Enviropest is a Value-Driven Company We are a value-driven company with a strong entrepreneurial spirit that guides our pest control services. Our core values include trust, innovation, and passion. We Value Our Team Members We value every team member, and without them, our customers would not receive the level of service they deserve. Grow with our company, where we provide employees with all the tools to succeed and advance their careers. Anticimex is an equal opportunity employer and does not discriminate on the basis of race, national origin, gender, gender identity, sexual orientation, protected veteran status, disability, age, or other legally protected status. Enviropest is a Drug-Free Workplace

Build an Aviation Career You're Proud Of At StandardAero, we use our ingenuity and know-how to find solutions for the simple to the most complex challenges in aviation. Together, we get the job done and done well. Our stability, resources, and respectful culture supports you in building a solid career with a great team you can count on day in and day out for the long term. **In addition to a competitive compensation package, generous relocation packages available to qualified candidates. As Chief Inspector, you'll have the authority and responsibility for managing, supervising, coordinating, training and scheduling all inspection functions for maintenance release. What you'll do: Ensure compliance with the Repair Station and Quality Manual (RSQM) in the performance of inspection duties. Ensure the standards and system for receiving, preliminary, hidden damage, in-process and final inspections of articles undergoing maintenance, preventive maintenance or alteration are performed in accordance with the applicable maintenance data and the RSQM. Maintain and Implement QSP 7.5.3 Identification and Traceability. Determine whether the requested maintenance, preventive maintenance or alteration on articles received for work can be accomplished within the applicable maintenance data, despite any other damage or discrepancies noted. Ensure that work performed on articles under the authority of the repair station is appropriately approved for return to service on the maintenance release document. Support the Quality Manager with Audits. Determine when Articles are beyond repair. Initiate the process that determines whether an article should be reported under the Suspected Unapproved Parts program and for filing reports under that program. Ensure Scrap parts are segregated in a manner that will prevent their use in maintenance, preventive maintenance or alteration pending final disposition from the customer. Review and approve operation routers, technical plans and special process parameters, etc. Communicates with vendors and customers as needed. Ensure personnel have appropriate knowledge or are properly trained prior to assigning inspection tasks. Ensure inspection personnel certifications and qualifications are maintained current. Assists with special projects as needed. Basic Qualifications Two or more years of experience working in an FAA 145 repair station or in a similar Quality Control position in an FAA regulated environment. Two or more years of experience with inspection methods, techniques, practices, aids, equipment and tools used to determine the airworthiness of the article on which maintenance, preventive maintenance or alterations are being performed. High School Diploma or general education degree (GED). Ability to frequently lift and/or move up to 25 pounds. Desired Skills A&P License preferred Aviation accessory and/or component experience. Experience with turbo-prop or turbo-fan and/or NDT. Familiar with FAA Order 8130.21 Benefits that make life better: Comprehensive Healthcare 401(k) with 100% company match; up to 5% vested Paid Time Off starting on day one Bonus opportunities Health- & Dependent Care Flexible Spending Accounts Short- & Long-Term Disability Life & AD&D Insurance Learning & Training opportunities #LI-KH1

Shums Coda Associates, Inc. is a privately held company providing professional Building and Safety Consulting Services to clients to verify conformance with Building Codes. We are seeking a Full-time Conveyance Inspector for our clients in Colorado. Conveyance Inspectors are considered highly skilled in performing inspections of both commercial and residential projects, enforcing codes and regulations in a broad range of varied relevant code sets. The work requires independence, discretion, and finesse. Responsibilities • Perform detailed code compliance safety inspections and provide required oversight of testing procedures for vertical transportation equipment. • Witness required testing of various elevator safety components to ensure compliance with applicable safety codes and confirm that operation is in accordance with the test requirements. • Conduct final acceptance inspections of new elevator and modernized elevator systems for compliance with applicable codes. • Provide detailed inspection reports reflecting the inspection / testing results, identifying code deficiencies and recommendations. • Explain elevator safety code compliance deficiencies in order resolve identified issues. • Communicate effectively while working with facility staff and local industry contractors: lead the inspection and testing process to achieve uniform results. • Demonstrate a solid understanding of the applicable Code requirements and inform owners, operators, contractors and building department staff of observed violations. Remove unsafe conveyances from service when required. • Provide training for and demonstrate personal safety practices in the field. • Possess the ability to investigate field incidents and provide concise observations without bias. • Conduct routine code, product technology and safety training, ensuring ongoing development of inspection personnel. • Demonstrate solid decision-making practices and guide inspection personnel for personal development. • Strive to become an industry resource professional. • Provide ongoing effort to increase client base. • Other duties as assigned. Job requirements Minimum Qualifications • Detailed knowledge of commercial and residential building design and construction methods; building, fire, electrical, accessibility and conveyance Codes & regulations • Professional experience performing code compliance inspections of vertical transportation equipment and systems. • Ability to read architectural, engineering and installation drawings, in addition to having a working knowledge of electrical, electronic and circuit construction principles. • Must be certified as a Qualified Elevator Inspector (ASME QEI-1) by an organization accredited by the American National Standards Institute • Demonstrate initiative and sound judgement. • Strong organizational skills and the ability to work independently. • Demonstrate the ability to work through complex issues of code compliance and the methods for achieving results. • Strong working knowledge of MS Office products, MS Word, Excel, Outlook, etc. All done! Your application has been successfully submitted! Other jobs

Job DescriptionDescriptionAs a CMM & Quality Inspector at Impulse, you will possess a comprehensive know-how of quality control, component inspection, and programming of inspection equipment. This role is tasked with working directly with various inspection tools including CMMs, Romer Arms, 3D scanning equipment, optical comparators and other fundamental inspection gauges. You will interface with engineering teams/leadership, and machinists to optimize part quality and improve the procedures that make and validate them. Responsibilities Down select and procure inspection equipment to support current and future component inspection needs. Select and utilize standard gauges to ensure quality. Inspect feature tolerances by selecting the tool with the required accuracy Set up Romer ARM or CMM to achieve the desired inspection Identify engineering and design GD&T issues and errors creating ambiguity in the manufacturing and inspection process Work with cross functional teams to apply process improvement Read GD&T requirements as applied to the engineering drawing and drawing notes Spot interpretation issues as applied to dimensions written or evaluation to requirements Complete inspections of flight & development hardware Minimum Qualifications High school diploma or equivalency certificate 6+ years of CMM programming experience 4+ years of demonstrated experience with Calypso software or similar for programming CMMs Preferred Skills and Experience 9+ years of CMM experience, including programming on multi-sensing CMMs (vision, laser, touch probe, etc.) Familiar with Heidenhain/Siemens/Fanuc CNC control for on-machine probing Ability to assist with designing/developing quality gauging to improve efficiencies Understands and adheres to ISO 9001 Able to read and understand all drawing criteria, GD&T, notes and tolerances Experience with set-up of CMM or Romer Arm Additional Information: Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options, and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan. Impulse Space's spacecraft manufacturing business is subject to U.S. export regulations including the International Traffic in Arms Regulations (ITAR) and Export Administration Regulations (EAR). This position requires applicants to be either U.S. Persons (i.e., U.S. citizen, U.S. national, lawful permanent U.S. resident (green card holder), an individual granted asylum in the U.S., or an individual admitted in U.S. refugee status) or persons eligible to obtain an export license from the U.S. Departments of State, Commerce, or other applicable U.S. government agencies. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

The 2nd Shift Quality Control Inspector is responsible for performing in-process and final inspections of sheet metal components to ensure compliance with drawings, specifications, and customer requirements. This position plays a key role in maintaining product quality, preventing defects, and supporting a culture of operational excellence. Key Responsibilities * Perform in-process, first-article, and final inspections using standard metrology tools (calipers, height gauges, micrometers, pin gauges, thread gauges, etc.) * Verify part conformance to engineering drawings, tolerances, and work instructions * Read and interpret blueprints, GD&T, and manufacturing specifications * Document inspection results accurately in quality records, travelers, and digital systems * Identify nonconformances * Conduct surface finish, weld quality and dimensional inspections as required * Collaborate with production operators and supervisors to resolve quality issues * Maintain a clean, organized, and safe work environment * Support continuous improvement initiatives Qualifications * Required: * 1+ years of experience in quality inspection, preferably in sheet metal fabrication or manufacturing * Ability to read and interpret blueprints * Proficiency with standard inspection tools * Strong attention to detail and accuracy * Ability to work independently on 2nd shift * Basic computer skills for data entry and documentation * Preferred: * Experience with FAIRs & ISO 9001 environments * Knowledge of welding inspection (visual weld criteria, AWS standards) Physical Requirements * Ability to stand for extended periods * Ability to lift up to 40 lbs. * Frequent bending, reaching, and handling of materials

Summit Interconnect is the premier electronics manufacturer in the US, located in Aurora, Colorado. Specializing in printed circuit board (PCB) assembly, we build the latest application designs from leading technology companies. From satellites and rocket payload to cutting-edge medical devices, we are known for our speed, service, and impeccable commitment to quality. We are continuously innovating our processes and systems to stay on the cutting edge of printed circuit board assembly manufacturing. Our vision is to have the best employees working to provide an outstanding service experience, and the coolest technology solutions for our customers. We look forward to you joining the team! Position Summary Execute the inspection of electronic assemblies according to industry specific standards. Ensure that the specifications of the established quality standards are met on all out-going products. Assist the Quality Assurance Manager, Production Manager and other company leadership with quality related functions as required. What you will do…. Inspect Printed Circuit Boards (PCBs) and Printed Circuit Boards Assembly (PCBAs) using microscope and magnifying tools following supplied data from customer and IPC-A-610 guidelines. Complete customer Certificates of Compliance (C of C) as required. Ability to separate good and non-conforming product during inspection process. Log inspection findings into electronic logs. What you need… High school diploma or equivalent. Minimum experience of 1 year in Electronic PCB Assembly. Minimum experience of 1 year in Quality Control. Understanding of quality concepts including sampling plans and continuous improvement Good working knowledge and understanding of PCBA manufacturing processes. Ability to read and interpret drawings, prints and component datasheets. Familiarity with basic measuring instruments tools and gauges (calipers, micrometers, etc.) Proficient with Microsoft office (Excel, Word, etc.). Excellent communication skills both written and verbal. (Including ability to read, understand and explain GMP, process procedures and other necessary documentation). Positive attitude to changes. Self-motivated with a team attitude. Be able to work scheduled and extra hours as required. Attention to detail. Preferred Proficient with IPC-A-610 standard (CIS preferred) Location: 20100 E 32nd Pkwy, #225 Aurora, CO 80011 Compensation : -$19.00-$20.00 /hour DOE +shift differential Schedule: Monday-Friday 11:00am-7:30pm Benefits Advanced Assembly has an excellent benefits program. We believe in taking care of our employees. We also have fun with regular company events, BBQ's, employee recognition awards, and performance- based bonus plans. Competitive Benefits Include: Medical Dental Vision EAP (free employee assistance programs) 401(k) plan Life Insurance Paid Time Off (PTO) Seven (7) paid holidays a year Candidates must pass background and drug testing. ITAR Compliance Notice This position requires compliance with the International Traffic in Arms Regulations (ITAR). Under ITAR, candidates must be a U.S. citizen, U.S. lawful permanent resident (e.g., "Green Card" holder), asylee, or refugee as defined by 8 U.S.C. 1324b(a)(3). Applicants who do not meet this requirement may not be eligible for employment in this position. Summit Interconnect is an Equal Opportunity Employer We are committed to fostering an inclusive and diverse workplace where everyone is valued and respected. We provide equal employment opportunities to all employees and applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetic information, veteran status, or any other legally protected characteristic. tation, gender identity, national origin, age, disability, genetic information, veteran status, or any other legally protected characteristic.

Looking to Supplement Your Income or Just Be Productive? Become an Independent Residential Insurance Inspector with CIS Group! Are you looking for a flexible, rewarding opportunity that allows you to be your own boss and take control of your schedule? CIS Group is seeking motivated, detail-oriented individuals to join our team as 1099 Property Insurance Inspectors. If you own an LLC and are looking to diversify your work, this might be the perfect opportunity for you! Why Work With Us? Since 1996, CIS Group has been one of the largest and most trusted names in the insurance inspection industry. We offer a platform that allows Independent Contractors to create and grow their own businesses, work flexible hours, and take on a variety of inspections. Whether you're supplementing your current work or looking for a new venture, this position offers flexibility and autonomy. What You'll Do: Travel to residential homes to complete exterior (interior photos here and there) property inspections. Take photos, collect property data, and upload your findings using your smartphone or tablet. Provide high-quality, professional service that delivers accuracy and on-time service, with exceptional communication. Maximize this opportunity by utilizing your unique skillset Watch this video to see an example of an exterior-only inspection: Click here to watch What We're Looking For: 1099 Independent Contractors - Be your own boss, set your own schedule! Flexible Hours - Work during daylight hours, Monday through Saturday. Comfortable Working Outdoors - This role requires you to work in various weather conditions. Tech-Savvy - A recent smartphone or tablet capable of taking and storing hundreds of photos. Computer Access - Wi-Fi-enabled for uploading data. Reliable Vehicle & Driver's License - Travel to residential properties within your area. Strong Communication Skills - You're a professional and a persistent communicator. You're not someone who just disappears when things get tough. Microsoft Excel Familiarity - Basic computer skills are necessary for managing your inspections. Compensation: Independent Contractors - You get paid per inspection. Fees - Vary based on location and inspection type, allowing for higher earning potential as you demonstrate competency. Why This Is Perfect for You: You've taught yourself how to solve problems and take on new challenges, and you're driven to succeed no matter the obstacles. This opportunity will allow you to create and or build your own business, and the flexibility to grow your income in an industry that remains resilient even through economic downturns. Ready to take control of your future and join a company that values your persistence and resourcefulness? Submit your resume now and become part of the CIS Group team! Pay = $1,000 monthly working 1 day per week

This is a Full Time Lane Inspector Position. Opus is a world-leading vehicle inspection and intelligent vehicle support company that has been contributing to a safer and cleaner world since the company was founded in 1990. We take pride in helping make our world a safer and cleaner place. Duties and Responsibilities: Lane Inspector - Vehicle Emissions testing. You will play an important role in limiting the production of Emissions by identifying the polluting vehicles. As a lane inspector, YOU will be responsible for the following: * Perform emission inspection functions following established procedures, and enter and verify vehicle information with computer data. * Operate vehicles during the emissions system test and use exhaust analysis equipment. * Direct motorists in and out of the station, provide test results, instruct customers on next steps in the inspection process, and collect inspection fees. * Other job duties as assigned. No experience required; we will train you! Requirements: * Must be 18 years of age. * Valid and unrestricted driver's license. * Physically able to stand, bend, stoop, kneel, and balance unassisted for extended periods of time. * Physically able to lift, push, and pull up to 20 lbs on an occasional basis. * Basic computer skills. * Full-time hours requirement is 40 hours a week. Qualifications: * Team player. * Excellent customer service skills. * Ability to work efficiently and multitask in a fast-paced, busy shop environment with a smile and positive attitude. * Work in an environment that includes vehicle exhaust fumes, noise, and heat. * Work in all weather conditions. * Work safely around operating motor vehicles. All offers of employment are contingent upon completing and meeting the criteria of a background check, drug screening, and I-9 verification.

Final QC Inspector FLSA STATUS: Non-Exempt DEPARTMENT: Quality SUPERVISOR: Quality Engineering Supervisor DIRECT REPORTS: None. This position is responsible for inspecting, testing, and sampling assembled parts or products for defects, wear, and deviations from specifications. The Final QC Inspector will conduct tests and inspections of products or processes to evaluate quality and performance, utilizing precision measuring instruments and test equipment. Minimum Qualifications Education: High school diploma, GED, or equivalent qualification preferred. IPC/WHMA-A-610 or 620 certification preferred. Experience: Prior experience in quality inspection, Knowledge: Knowledge of IPC 610 and 620, ability to read and understand customer requirements and simple customer assembly drawings Extensive knowledge of components, connectors, terminals and mating connectors for fixture construction Skills: Ability to read wiring diagrams and engineering drawings, use of multi-meter, complex test equipment, force gages and calipers Must be able to read, write and speak English Must be able to recognize discrepancies on drawings and in customer requirements and bring them to the attention of leads, supervisors and/or management Job Responsibilities Conduct basic signature testing of cables, test beeping, terminal and solder inspection, simple high voltage and ground impedance testing. Perform data entry and complete associated paperwork, including inspection logs. Conduct complex high voltage and ground impedance testing and generate new signature profiles for assemblies. Write first article inspection reports and complete RMA evaluations. Perform simple fixture repair and construction. Organize existing assembly files and fixture database. Audit shelf-life, hazardous communication (hazcom), and calibration logs. Calibrate Cirris Signature Testers. Evaluate new complex assemblies and develop inspection plans. Work closely with Manufacturing to identify and resolve issues with new assemblies. Train new inspectors and acquire information/components for future inspection requirements. Collaborate with Engineering and Account Management on workflow needs. Perform general area cleanup and organization. Attend appropriate training and administrative meetings. Work with other departments to achieve company goals. Utilize communication skills necessary to execute company directives. Perform soldering, termination, plugging of connectors, heat shrinking, and comply with ESD assembly requirements. Other responsibilities, initiatives and ad-hoc projects as required. Internal and External Relationships Internal: Works closely with the Quality Engineering Supervisor, Manufacturing, Engineering, and Account Management teams to ensure product quality and process efficiency. Collaborates with production staff to identify and resolve quality issues. External: Interacts with customers and suppliers as needed to address quality concerns, ensure compliance with specifications, and support continuous improvement initiatives. May communicate with third-party testing agencies when required. Physical Requirements The physical demands described here are representative of those that must be met to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand, walk, and sit for extended period and must have the capability to lift up to 25 pounds. They must perform repetitive tasks and they must also have the ability to see details clearly at close range (within a few feet) and have precise coordination of fingers for grasping, manipulating, or assembling small objects. Overtime may be required based on production demands. The working environment is a standard manufacturing environment. The noise level in the work environment is usually low to moderate. Pay: $21-26/hr (varies based on experience)

Job Description Summit Interconnect is the premier electronics manufacturer in the US, located in Aurora, Colorado. Specializing in printed circuit board (PCB) assembly, we build the latest application designs from leading technology companies. From satellites and rocket payload to cutting-edge medical devices, we are known for our speed, service, and impeccable commitment to quality. We are continuously innovating our processes and systems to stay on the cutting edge of printed circuit board assembly manufacturing. Our vision is to have the best employees working to provide an outstanding service experience, and the coolest technology solutions for our customers. We look forward to you joining the team! Position Summary Execute the inspection of electronic assemblies according to industry specific standards. Ensure that the specifications of the established quality standards are met on all out-going products. Assist the Quality Assurance Manager, Production Manager and other company leadership with quality related functions as required. What you will do…. Inspect Printed Circuit Boards (PCBs) and Printed Circuit Boards Assembly (PCBAs) using microscope and magnifying tools following supplied data from customer and IPC-A-610 guidelines. Complete customer Certificates of Compliance (C of C) as required. Ability to separate good and non-conforming product during inspection process. Log inspection findings into electronic logs. What you need… High school diploma or equivalent. Minimum experience of 1 year in Electronic PCB Assembly. Minimum experience of 1 year in Quality Control. Understanding of quality concepts including sampling plans and continuous improvement Good working knowledge and understanding of PCBA manufacturing processes. Ability to read and interpret drawings, prints and component datasheets. Familiarity with basic measuring instruments tools and gauges (calipers, micrometers, etc.) Proficient with Microsoft office (Excel, Word, etc.). Excellent communication skills both written and verbal. (Including ability to read, understand and explain GMP, process procedures and other necessary documentation). Positive attitude to changes. Self-motivated with a team attitude. Be able to work scheduled and extra hours as required. Attention to detail. Preferred Proficient with IPC-A-610 standard (CIS preferred) Location: 20100 E 32nd Pkwy, #225 Aurora, CO 80011 Compensation: -$19.00-$20.00 /hour DOE +shift differential Schedule: Monday-Friday 11:00am-7:30pm Benefits Advanced Assembly has an excellent benefits program. We believe in taking care of our employees. We also have fun with regular company events, BBQ's, employee recognition awards, and performance- based bonus plans. Competitive Benefits Include: Medical Dental Vision EAP (free employee assistance programs) 401(k) plan Life Insurance Paid Time Off (PTO) Seven (7) paid holidays a year Candidates must pass background and drug testing. ITAR Compliance Notice This position requires compliance with the International Traffic in Arms Regulations (ITAR). Under ITAR, candidates must be a U.S. citizen, U.S. lawful permanent resident (e.g., "Green Card" holder), asylee, or refugee as defined by 8 U.S.C. 1324b(a)(3). Applicants who do not meet this requirement may not be eligible for employment in this position. Summit Interconnect is an Equal Opportunity Employer We are committed to fostering an inclusive and diverse workplace where everyone is valued and respected. We provide equal employment opportunities to all employees and applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetic information, veteran status, or any other legally protected characteristic. tation, gender identity, national origin, age, disability, genetic information, veteran status, or any other legally protected characteristic.

This is a Full Time Lane Inspector Position. Opus is a world-leading vehicle inspection and intelligent vehicle support company that has been contributing to a safer and cleaner world since the company was founded in 1990. We take pride in helping make our world a safer and cleaner place. Duties and Responsibilities: Lane Inspector - Vehicle Emissions testing. You will play an important role in limiting the production of Emissions by identifying the polluting vehicles. As a lane inspector, YOU will be responsible for the following: * Perform emission inspection functions following established procedures, and enter and verify vehicle information with computer data. * Operate vehicles during the emissions system test and use exhaust analysis equipment. * Direct motorists in and out of the station, provide test results, instruct customers on next steps in the inspection process, and collect inspection fees. * Other job duties as assigned. No experience required; we will train you! Requirements: * Must be 18 years of age. * Valid and unrestricted driver's license. * Physically able to stand, bend, stoop, kneel, and balance unassisted for extended periods of time. * Physically able to lift, push, and pull up to 20 lbs on an occasional basis. * Basic computer skills. * Full-time hours requirement is 40 hours a week. Qualifications: * Team player. * Excellent customer service skills. * Ability to work efficiently and multitask in a fast-paced, busy shop environment with a smile and positive attitude. * Work in an environment that includes vehicle exhaust fumes, noise, and heat. * Work in all weather conditions. * Work safely around operating motor vehicles. All offers of employment are contingent upon completing and meeting the criteria of a background check, drug screening, and I-9 verification.

Summit Interconnect is the premier electronics manufacturer in the US, located in Aurora, Colorado. Specializing in printed circuit board (PCB) assembly, we build the latest application designs from leading technology companies. From satellites and rocket payload to cutting-edge medical devices, we are known for our speed, service, and impeccable commitment to quality. We are continuously innovating our processes and systems to stay on the cutting edge of printed circuit board assembly manufacturing. Our vision is to have the best employees working to provide an outstanding service experience, and the coolest technology solutions for our customers. We look forward to you joining the team! Position Summary Execute the inspection of electronic assemblies according to industry specific standards. Ensure that the specifications of the established quality standards are met on all out-going products. Assist the Quality Assurance Manager, Production Manager and other company leadership with quality related functions as required. What you will do…. Inspect Printed Circuit Boards (PCBs) and Printed Circuit Boards Assembly (PCBAs) using microscope and magnifying tools following supplied data from customer and IPC-A-610 guidelines. Complete customer Certificates of Compliance (C of C) as required. Ability to separate good and non-conforming product during inspection process. Log inspection findings into electronic logs. What you need… High school diploma or equivalent. Minimum experience of 1 year in Electronic PCB Assembly. Minimum experience of 1 year in Quality Control. Understanding of quality concepts including sampling plans and continuous improvement Good working knowledge and understanding of PCBA manufacturing processes. Ability to read and interpret drawings, prints and component datasheets. Familiarity with basic measuring instruments tools and gauges (calipers, micrometers, etc.) Proficient with Microsoft office (Excel, Word, etc.). Excellent communication skills both written and verbal. (Including ability to read, understand and explain GMP, process procedures and other necessary documentation). Positive attitude to changes. Self-motivated with a team attitude. Be able to work scheduled and extra hours as required. Attention to detail. Preferred Proficient with IPC-A-610 standard (CIS preferred) Location: 20100 E 32nd Pkwy, #225 Aurora, CO 80011 Compensation: -$19.00-$20.00 /hour DOE +shift differential Schedule: Monday-Friday 11:00am-7:30pm Benefits Advanced Assembly has an excellent benefits program. We believe in taking care of our employees. We also have fun with regular company events, BBQ's, employee recognition awards, and performance- based bonus plans. Competitive Benefits Include: Medical Dental Vision EAP (free employee assistance programs) 401(k) plan Life Insurance Paid Time Off (PTO) Seven (7) paid holidays a year Candidates must pass background and drug testing. ITAR Compliance Notice This position requires compliance with the International Traffic in Arms Regulations (ITAR). Under ITAR, candidates must be a U.S. citizen, U.S. lawful permanent resident (e.g., "Green Card" holder), asylee, or refugee as defined by 8 U.S.C. 1324b(a)(3). Applicants who do not meet this requirement may not be eligible for employment in this position. Summit Interconnect is an Equal Opportunity Employer We are committed to fostering an inclusive and diverse workplace where everyone is valued and respected. We provide equal employment opportunities to all employees and applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetic information, veteran status, or any other legally protected characteristic. tation, gender identity, national origin, age, disability, genetic information, veteran status, or any other legally protected characteristic.