Inspector jobs in High Point, NC - 93 jobs

The Inspector at Cook Winston-Salem is responsible to inspect products according to regulated procedures. Responsibilities * Inspect products and or components per detailed specifications and/or drawings for quality, which includes, but is not limited to the following: - Visually, dimensionally and functionally inspect product - Determine whether the product is acceptable using prescribed standards - Complete all necessary documentation• Assist in training new employees in the department• Perform daily and weekly cleaning• Perform other duties as assigned• Ability to read, write, and understand product specifications, drawings, work orders, labels and quality forms written in English• Ability to use a variety of testing equipment including small measuring devices * Maintain regular and punctual attendance• Must maintain company quality and quantity standards Qualifications * High School Diploma or GED • Minimum 18 years of age Physical Requirements: * Must be able to perform the essential functions of the job, with or without reasonable accommodations• Majority of work is conducted in a "controlled" environment• Visual Acuity to work with small parts * Majority of day is spent sitting and walking within various departments• Ability to occasionally lift up to 10lbs 90% of day; remaining 10% able to co-carry up to 35lbs• Ability to perform fine manipulation with hands e.g. grasping, pinching pulling

Company Cox Automotive - USA Job Family Group Vehicle Operations Job Profile Mobile Inspector II Management Level Individual Contributor Flexible Work Option No remote option; must work at a specified Cox location Travel % No Work Shift Day Compensation Hourly pay rate is $15.29 - $22.98/hour. The hourly rate may vary within the anticipated range based on factors such as the ultimate location of the position and the selected candidate's experience. In addition to the hourly range identified herein, this role is also eligible for an annual incentive/commission target of $6,000.00. Job Description A Mobile Inspector II functions as a member of the Manheim mobile inspections team for a designated region with the primary responsibility of conducting vehicle condition inspections on a client's lot. Their core skill is to provide accurate and complete documentation of overall vehicle condition within the parameters of a Manheim inspection. This position will build trust with Clients, engage to help them see the value in the Manheim Marketplace, and to request more inventory to be inspected by providing quality and timely inspections. As a Mobile Inspector II, it is expected to perform tasks with minimal guidance and supervision, while demonstrating growing independence and problem-solving skills. * This Position will be based out of Greensboro, NC Primary Duties & Key Responsibilities * Conduct a thorough vehicle inspection. * Locate, start, move, inspect, and return vehicles on dealer/clients' lot safely. * Verify vehicle identification and enter accurate vehicle information into the inspection system to correct VIN, mileage, and sub series. * Inspect vehicle equipment and options, documenting results including damage, missing or inoperable items. * Inspect and record vehicle exterior condition, including but not limited to tires, frame, glass, panels, and mechanical components. * Inspect and record the vehicle interior condition, including but not limited to seats, dashboard, and options. * Perform basic mechanical checks on vehicles including powertrain, drivetrain, and electrical components. * Prepare and provide daily activity reports for management. * Be able to pivot and adapt to changes in daily appointments to ensure efficiency and effectiveness of each dealer visit * Develop strong knowledge of clients in territory and work together with partners to keep them active with Manheim mobile inspections through regular, pro-active on lot engagement * Receive data and insight from partners and leverage to maximize volume of units inspected on dealer lots. * Represent Cox Automotive as a brand ambassador and provide premier client experience by interfacing regularly core clients and ensuring satisfaction. * Functions as a solid team player and works closely with the Wholesale Specialist team, peers, other Manheim workgroups and auctions. * Utilize SalesForce.com for reporting, lead input and customer performance reviews. * Understanding NAAA Frame/Structure Damage Policy. * Will work in a continuous improvement/Lean environment and encouraged to drive a lean culture. * Maintain production expectations set by the leader. * Visibly demonstrate safety commitment by following all safety and health procedures and modeling the behaviors related to such. Actively participate in support of all safety activities aligned with Safety Excellence. * Other duties as assigned. Required Experience & Specialized Knowledge and Skills * High School Diploma/GED required. * 3 years of any automotive related experience. * Valid driver's license and safe driving record required. * Travel 100% - Reliable transportation required. Reimbursement program dependent on number of miles driven. * Good communication and interpersonal skills required. * Strong technical aptitude. * Must be detail orientated. * Experience in navigating handheld and other documentation devices preferred. * Motivated to work independently with remote supervision. * Ability to multitask, follow directions and take instruction is required. * Body, paint, and mechanical repair knowledge helpful. * Familiarity with unibody and full-frame helpful. * Ability to lift and hold at least 30 lbs. at waist level for an extended period of time. * Regularly required to stand, walk, talk, and hear. * Frequently required to crouch, bend, and kneel to look at side or underneath car. Strength to lift hood or trunk. Bend while performing audits. Reach inside or underneath vehicle. * Near vision abilities required to find dings and scratches, paint work, hail damage, frame/unibody, other exterior damage and Interior damage. Able to identify exterior or interior colors. * Ability to deal with different lighting (i.e. exterior and interior lighting, natural and artificial light) * Requires physical ability and mental acuity to execute the duties of the position successfully within required timeframes to meet business requirements. MSCOX Drug Testing To be employed in this role, you'll need to clear a pre-employment drug test. Cox Automotive does not currently administer a pre-employment drug test for marijuana for this position. However, we are a drug-free workplace, so the possession, use or being under the influence of drugs illegal under federal or state law during work hours, on company property and/or in company vehicles is prohibited. Benefits Employees are eligible to receive a minimum of sixteen hours of paid time off every month and seven paid holidays throughout the calendar year. Employees are also eligible for additional paid time off in the form of bereavement leave, time off to vote, jury duty leave, volunteer time off, military leave, and parental leave. About Us Through groundbreaking technology and a commitment to stellar experiences for drivers and dealers alike, Cox Automotive employees are transforming the way the world buys, owns, sells - or simply uses - cars. Cox Automotive employees get to work on iconic consumer brands like Autotrader and Kelley Blue Book and industry-leading dealer-facing companies like vAuto and Manheim, all while enjoying the people-centered atmosphere that is central to our life at Cox. Benefits of working at Cox may include health care insurance (medical, dental, vision), retirement planning (401(k)), and paid days off (sick leave, parental leave, flexible vacation/wellness days, and/or PTO). For more details on what benefits you may be offered, visit our benefits page. Cox is an Equal Employment Opportunity employer - All qualified applicants/employees will receive consideration for employment without regard to that individual's age, race, color, religion or creed, national origin or ancestry, sex (including pregnancy), sexual orientation, gender, gender identity, physical or mental disability, veteran status, genetic information, ethnicity, citizenship, or any other characteristic protected by law. Cox provides reasonable accommodations when requested by a qualified applicant or employee with disability, unless such accommodations would cause an undue hardship. Applicants must currently be authorized to work in the United States for any employer without current or future sponsorship. No OPT, CPT, STEM/OPT or visa sponsorship now or in future.

Company Cox Automotive - USA Job Family Group Vehicle Operations Job Profile Mobile Inspector II Management Level Individual Contributor Flexible Work Option No remote option; must work at a specified Cox location Travel % No Work Shift Day Compensation Hourly pay rate is $15.29 - $22.98/hour. The hourly rate may vary within the anticipated range based on factors such as the ultimate location of the position and the selected candidate's experience. In addition to the hourly range identified herein, this role is also eligible for an annual incentive/commission target of $6,000.00. Job Description A Mobile Inspector II functions as a member of the Manheim mobile inspections team for a designated region with the primary responsibility of conducting vehicle condition inspections on a client's lot. Their core skill is to provide accurate and complete documentation of overall vehicle condition within the parameters of a Manheim inspection. This position will build trust with Clients, engage to help them see the value in the Manheim Marketplace, and to request more inventory to be inspected by providing quality and timely inspections. As a Mobile Inspector II, it is expected to perform tasks with minimal guidance and supervision, while demonstrating growing independence and problem-solving skills. ***This Position will be based out of Greensboro, NC Primary Duties & Key Responsibilities Conduct a thorough vehicle inspection. Locate, start, move, inspect, and return vehicles on dealer/clients' lot safely. Verify vehicle identification and enter accurate vehicle information into the inspection system to correct VIN, mileage, and sub series. Inspect vehicle equipment and options, documenting results including damage, missing or inoperable items. Inspect and record vehicle exterior condition, including but not limited to tires, frame, glass, panels, and mechanical components. Inspect and record the vehicle interior condition, including but not limited to seats, dashboard, and options. Perform basic mechanical checks on vehicles including powertrain, drivetrain, and electrical components. Prepare and provide daily activity reports for management. Be able to pivot and adapt to changes in daily appointments to ensure efficiency and effectiveness of each dealer visit Develop strong knowledge of clients in territory and work together with partners to keep them active with Manheim mobile inspections through regular, pro-active on lot engagement Receive data and insight from partners and leverage to maximize volume of units inspected on dealer lots. Represent Cox Automotive as a brand ambassador and provide premier client experience by interfacing regularly core clients and ensuring satisfaction. Functions as a solid team player and works closely with the Wholesale Specialist team, peers, other Manheim workgroups and auctions. Utilize SalesForce.com for reporting, lead input and customer performance reviews. Understanding NAAA Frame/Structure Damage Policy. Will work in a continuous improvement/Lean environment and encouraged to drive a lean culture. Maintain production expectations set by the leader. Visibly demonstrate safety commitment by following all safety and health procedures and modeling the behaviors related to such. Actively participate in support of all safety activities aligned with Safety Excellence. Other duties as assigned. Required Experience & Specialized Knowledge and Skills High School Diploma/GED required. 3 years of any automotive related experience. Valid driver's license and safe driving record required. Travel 100% - Reliable transportation required. Reimbursement program dependent on number of miles driven. Good communication and interpersonal skills required. Strong technical aptitude. Must be detail orientated. Experience in navigating handheld and other documentation devices preferred. Motivated to work independently with remote supervision. Ability to multitask, follow directions and take instruction is required. Body, paint, and mechanical repair knowledge helpful. Familiarity with unibody and full-frame helpful. Ability to lift and hold at least 30 lbs. at waist level for an extended period of time. Regularly required to stand, walk, talk, and hear. Frequently required to crouch, bend, and kneel to look at side or underneath car. Strength to lift hood or trunk. Bend while performing audits. Reach inside or underneath vehicle. Near vision abilities required to find dings and scratches, paint work, hail damage, frame/unibody, other exterior damage and Interior damage. Able to identify exterior or interior colors. Ability to deal with different lighting (i.e. exterior and interior lighting, natural and artificial light) Requires physical ability and mental acuity to execute the duties of the position successfully within required timeframes to meet business requirements. MSCOX Drug Testing To be employed in this role, you'll need to clear a pre-employment drug test. Cox Automotive does not currently administer a pre-employment drug test for marijuana for this position. However, we are a drug-free workplace, so the possession, use or being under the influence of drugs illegal under federal or state law during work hours, on company property and/or in company vehicles is prohibited. Benefits Employees are eligible to receive a minimum of sixteen hours of paid time off every month and seven paid holidays throughout the calendar year. Employees are also eligible for additional paid time off in the form of bereavement leave, time off to vote, jury duty leave, volunteer time off, military leave, and parental leave. About Us Through groundbreaking technology and a commitment to stellar experiences for drivers and dealers alike, Cox Automotive employees are transforming the way the world buys, owns, sells - or simply uses - cars. Cox Automotive employees get to work on iconic consumer brands like Autotrader and Kelley Blue Book and industry-leading dealer-facing companies like vAuto and Manheim, all while enjoying the people-centered atmosphere that is central to our life at Cox. Benefits of working at Cox may include health care insurance (medical, dental, vision), retirement planning (401(k)), and paid days off (sick leave, parental leave, flexible vacation/wellness days, and/or PTO). For more details on what benefits you may be offered, visit our benefits page. Cox is an Equal Employment Opportunity employer - All qualified applicants/employees will receive consideration for employment without regard to that individual's age, race, color, religion or creed, national origin or ancestry, sex (including pregnancy), sexual orientation, gender, gender identity, physical or mental disability, veteran status, genetic information, ethnicity, citizenship, or any other characteristic protected by law. Cox provides reasonable accommodations when requested by a qualified applicant or employee with disability, unless such accommodations would cause an undue hardship.Applicants must currently be authorized to work in the United States for any employer without current or future sponsorship. No OPT, CPT, STEM/OPT or visa sponsorship now or in future.

RK&K is hiring an experienced Construction Inspector to join our Construction Engineering and Inspection (CEI) team in and around Charlotte, NC. The Construction Inspector will conduct field inspections for a wide range of Transportation, Highways and Structural construction projects in the heavy civil industry. Essential Functions As a construction inspector in RK&K's Construction / CEI division you will perform complex and routine inspections of construction to evaluate if appropriate materials and construction processes are being used; and that construction conforms to plans, specifications, and special provisions Multitask management of project assignments Conduct field inspections Use mobile devices to document work - as required in North Carolina Reviews drawings to prepare for the inspection. Understands the design of the construction that will be inspected Documents the results of the inspection and communicates to the supervisor Conducts field measurements to establish quantities for pay item documentation as well as other contract administration documentation Inspects work zones for proper traffic control setup, erosion control devices and maintenance thereof, utility coordination and right-of-way issue resolution Required Skills and Experience At least two (2) years of roadway inspection experience for highway construction methods, materials, standards and specifications Valid driver's license and favorable driving record Ability to lift up to 50 pounds Preferred Skills and Experience NCDOT Certifications preferred: NCDOT Erosion & Sediment Control Level II NCDOT Introduction to Asphalt Pavements NCDOT QMS Roadway Technician NCDOT Concrete Field Technician ACI Concrete Field Technician NCDOT ABC Sampling Technician NCDOT Borrow Pit Sampling Technician NCDOT Conventional Density Technician NICET Certifications Other Duties This job description indicates the general nature and levels of work, knowledge, skills, abilities, and other essential functions (as covered under ADA). It is not designed to cover or contain a comprehensive listing of all activities and duties required by the employee. Other duties are assigned as required . What We Offer RK&K offers excellent potential for career advancement and professional growth. We also offer attractive compensation packages commensurate with experience and a comprehensive benefits package including: Paid time off Tuition reimbursement Health, dental, vision, life, and disability insurances Matching 401(k) plan Paid Holidays Much, much more! Why RK&K? As a full-service engineering and construction management firm, RK&K gives you the opportunity to directly impact the communities in which we live and work. What sets RK&K apart is an award-winning culture that has fostered a spirit of collaboration and trust for over 100 years. To its clients, the firm delivers concepts, processes, and outcomes that are designed for success. RK&K has earned its reputation as a trusted partner, responsive employer, and community steward. Design your career at RK&K, Apply Today!

Job Description We are currently seeking a reliable candidate WITH A BACKGROUND IN TEXTILES for our client located in Winston-Salem, NC! ***2nd SHIFT , 3pm-11pm*** Essential Functions and Key Result Areas: 1. Keep the area around the machine clean and safe to work in 2. Pin in full A-frames after material handler has delivered to frame 3. Verify that ticket pattern and fabric pattern match using the reference swatches 4. Set the specified roll length into the metering devices 5. Attach fabric to cardboard core with tape cross full width of the fabric 6. Inspect the fabric as it is rolled onto a cardboard core to specified length 7. Monitor the exact width and record in the SAP 8. Flag all defects and record in SAP 9. Remove sewn seams and pattern/ticket changes making two part piece 10. Wrap the piece with plastic wrap 11. Record the required data in the SAP, and properly identify the pieces with printed labels at the end of each roll 12. Wire tie both ends of the plastic wrap 13. Deliver inspected samples to the sample room 14. Clean the frames at least once per week at end of shift 15. Other duties, as assigned. Educational Requirements: High school diploma / GED Physical Demands Summary: Pushing Pulling Lifting Picking, pinching, typing or otherwise working, primarily with fingers rather than with the whole hand as in handling. Grasping Feeling Talking. Expressing or exchanging ideas by means of the spoken word. Those activities in which they must convey detailed or important spoken instructions to other workers accurately, loudly, or quickly. Hearing Repetitive motion. Substantial movements (motions) of the wrists, hands, and/or fingers. Light work. Exerting up to 20 pounds of force occasionally, and/or up to 10 pounds of force frequently, and/or a negligible amount of force constantly to move objects. If the use of arm and/or leg controls requires exertion of forces greater than that for sedentary work and the worker sits most of the time, the job is rated for light work. The worker is required to have close visual acuity to perform an activity such as: preparing and analyzing data and figures; transcribing; viewing a computer terminal; extensive reading; visual inspection involving small defects, small parts, and/or operation of machines (including inspection); using measurement devices; and/or assembly or fabrication parts at distances close to the eyes. Other requirements or special comments: Must be able to distinguish all colors (not color blind) Stand for long periods of time on concrete floors Use scissors, tape gun, and computer Subject to seasonal extreme temperatures Company DescriptionGuiding PEOPLE along their chosen career path. Providing our clients with flexible Human Resource PRODUCTS, while showing our commitment to outstanding SERVICE. EEOCompany DescriptionGuiding PEOPLE along their chosen career path. Providing our clients with flexible Human Resource PRODUCTS, while showing our commitment to outstanding SERVICE.\r \r EEO

Job Description ESSENTIAL DUTIES AND RESPONSIBILITIES Make decisions when required with regard to the airworthiness of aircraft, engines, components and accessories Conduct inspections and related functions as directed by job cards, maintenance manuals, A.D.'s and other documents included or specified in the work package. Conduct receiving inspection of all components, materials, tooling, and hardware as required by this manual and applicable FAR's Conduct RII inspections (if qualified) in accordance with approved procedures and maintenance program requirements. Review paperwork, including but not limited to, maintenance forms, parts tags, job cards, log pages and tally sheets to ensure compliance with this Repair Station Manual and all applicable FAR's Inspect, determine the airworthiness of and approve the final acceptance of all incoming material, including new parts, supplies and articles on which work has been performed by contracted vendors of North State Aviation. Conduct the preliminary, hidden damage, in-process, and final inspection of all articles processed by North State Aviation and record results as outlined in the Repair Station & Quality Control Manuals. Ensure adherence to all RII inspection items and procedures. Perform all other duties and responsibilities of an aircraft maintenance mechanic when not performing the duties of an Inspector. NOTE: An Inspector may not buy back or inspect his or her own work Read, understand and apply the requirements, guidelines and regulations of the Repair Station & Quality Control Manuals that apply to the duties and responsibilities an Inspector. Read, understand and comply with the applicable regulations in the Repair Station & Quality Control Manuals and with the inspection methods, techniques, practices, aids, equipment, and tools used to determine the airworthiness of the article on which maintenance, preventive maintenance, or alterations are being performed. Utilize proficiently the various types of inspection equipment and visual inspection aids appropriate for the article being inspected. Perform additional duties as assigned. REQUIRED SKILLS AND ABILITIES Physical: While performing maintenance on an aircraft, employees must be able to balance, bend, stoop, crawl, climb, climb stairs, crouch, carry items up to 50 pounds, grasp, kneel, lift items 50 pounds or over, pull hand over hand, push, reach above shoulder, use repetitive motion, sit on average 2 hours per day, stand on average 8 hours per day, walk on average 6 hours per day, possess the ability to see and follow precise instructions, documents, diagrams, or blueprints, to distinguish color differences, to see and read information via computer screen or other electronic device, to detect distinct, specific noises, to hear if equipment/tools, etc. are operating properly, to hear and understand precise directions, to hear and understand what others are saying in normal conversation. Mental: While performing maintenance on an aircraft, employees must be able to understand, remember, and apply complex oral and/or written instructions or other information, to organize thoughts and ideas into understandable terminology or data, to make decisions which have significant impact on the immediate work unit and monitor impact outside immediate work unit. Communication: While performing maintenance on an aircraft, employees must be able to read, write, speak, and understand the English language, to understand and follow complex instructions and guidelines, to complete complex forms, documents or reports, and/or conduct complex oral communication with others, to express or exchange ideas by means of the spoken word, communicating orally with others accurately, loudly, and quickly. To perform accurate and quality work, employees must possess and demonstrate mechanical and analytical aptitude, effectively communicate both orally and in writing, be flexible and cooperative, meet tight deadlines, possess attention to detail, have the ability to work productively within a diverse work environment, and be safety conscious. WORKING CONDITIONS Combination of inside and outside with changing climate conditions Moderate to high noise level Low to moderate risk for exposure to hazardous chemicals, vapors, or materials Work in confined spaces, work at varied heights MINIMUM QUALIFICATIONS A&P certification 737 GenFam Two or more years' documented/verifiable maintenance experience on Boeing transport category aircraft Prefer experience in the installation and rigging of flight controls, in conducting sheet metal repairs and in avionics. Must meet the requirements of FAR: 145.155

We are hiring Inspector / Packagers at our Whitsett, NC plant, located at 6900 Konica Drive immediately with a start date as soon as Monday, March 17, 2025 Daytime Shift: 6:30 am to 5:00 pm, Monday through Thursday - 4 Ten hour shifts. Must be able to stand for the duration of your shift on an assembly line. We will provide the training and the tools that you need to be successful in your position. This is a job that is fast paced, working as part of a team and there is plenty of work to accomplish. We have a great place to work with awesome employees. We have 3 positions, 40 hours a week at $12.00 an hour to start. After 60 days, if you have great attendance, a willingness to learn and work as a member of a team, you will be eligible for health insurance, Paid Time off, a 401K plan, 10 Paid Holidays and a salary increase after six months. A great Zink perk is you will always enjoy every Friday, Saturday and Sunday off. You read that correctly. You will never have to work on a weekend! We are open to hiring college students, people looking for their 1st job or anyone who is willing to work. Please apply online at ******************** No outside agencies or recruiters please. For immediate consideration, apply online ******************** or send your resume to ********************* Zink is committed to creating a diverse environment and is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status. No recruiters or agencies. Thank you for your interest.

Job Description CEI Inspectors S&ME is looking for Construction Engineering and Inspection (CEI) Inspectors to support our Transportation group across North Carolina, including Asheville, Charlotte, Greensboro, Raleigh, Wilmington, and nearby regions. In this role, you'll help ensure that vital infrastructure projects-such as highways, bridges, greenways, airports, ports, and rail systems-are built to meet safety, quality, and regulatory benchmarks. Your knowledge and attention to detail will safeguard compliance and uphold excellence throughout the construction process. What You Will Do: As a CEI Inspector, you'll play a critical role in overseeing contractor activities and ensuring the successful completion of projects. You may make key technical decisions and work independently or as part of a team on projects. Monitor contractor operations to confirm projects are executed according to approved plans, specifications, and safety requirements. Supervise activities including grading, paving, bridge work, and traffic control. Evaluate erosion control practices and environmental standards, while conducting material sampling and quality assurance testing. Prepare thorough daily inspection logs, track contractor performance, and manage payment documentation. Perform calculations, record material quantities, and verify project schedules remain on track. Participate in progress and safety meetings, collaborating with contractors, engineers, and stakeholders to address challenges. Conduct DBE/EEO compliance reviews to ensure workforce inclusivity and adherence to equal opportunity standards. Pay is hourly plus overtime and commensurate with experience, with additional incentives available for candidates who hold relevant certifications. Qualifications: High school diploma or GED required. Prior experience in highway construction or inspection. A technical degree in Civil Engineering Technology or Surveying Technology may substitute for one year of experience. Active NCDOT certifications such as QMS Roadway, Conventional Density, Concrete Field Technician, Erosion Control Level II, and/or Nuclear Gauge. Strong English communication skills (oral and written). Solid math skills with knowledge of weight, volume, pressure, and measurement units. Flexibility to work variable schedules and willingness to travel as needed. Work Environment: This is a physically demanding, outdoor role requiring the use of company-issued PPE. Inspectors will work in all weather conditions, traverse uneven terrain, stand for extended periods (up to 12 hours), and lift/carry 40-50 lbs. of materials and equipment. The position involves exposure to highway traffic, heavy machinery, and active construction sites, with potential for long hours, weekends, and holidays. We Are S&ME: At S&ME, we're committed to your growth, professionally and personally. With over 50 years of experience delivering innovative solutions in geotechnical, civil, environmental, and construction materials engineering, we've built a strong foundation for long-term careers. Our team of 1,000+ employee-owners across 10+ states works together to create meaningful impact for our clients and communities. When you join S&ME, you become part of a collaborative, honest, and people-focused culture that invests in your success. We offer exciting project opportunities, ongoing training, and a comprehensive benefits package to support you and your family. This is more than a job; it's a place to grow, thrive, and build a future. What We Offer: Comprehensive Health & Wellness Programs Medical, Dental & Vision Plans with HSA and FSA options - plus no medical premium increase in 2026 Wellness Program offering $50 off per month on 2027 premiums Pet Insurance for your furry family members Ownership & Financial Perks 100% Employee Stock Ownership Plan (ESOP) with a 5% company contribution 401(k) Retirement Plan to help you plan ahead Term Life & Long-Term Care Coverage - available Spring 2026 Work-Life Balance & Career Development Paid Holidays, PTO with rollover options, and Paid Maternity & Paternity Leave Mentorship & Career Development Programs, Tuition Reimbursement, and Credential Incentive Program Employee Recognition Program, $2,000 Referral Bonuses, and company vehicle & fuel card for project-based roles If you're passionate about making an impact and want to work with a firm committed to our employees and providing quality service to our clients, we'd love to hear from you! This full-time role offers competitive pay based on experience. Candidates must comply with our Fleet Management, Substance Policy, and Reference Check requirements. Only candidates with valid employment eligibility (I-9) will be considered. Visa assistance is not available. S&ME reserves the right to hire internally or externally at any time. No candidate/recruiter calls, personal calls, or walk-ins are accepted. Job Posted by ApplicantPro

Job Description TAT Technologies (Greensboro facility) is part of a multi-site, global aerospace company dedicated to our customer experience of exceeding expectations. We are the leading APU leasing and repair station for key commercial and military aircraft solutions with over 50 years of experience in the industry. We have an ambitious and fast-growing environment that believes in the power of team collaboration with the deep-rooted belief that there is no substitution to personal relationships and interactions. We offer a flexible work environment enabling talented individuals to fulfill their development goals through drive, energy, and passion for the customer. TAT Technologies is looking for a qualified Quality Inspector (APU). This position will ensure quality is maintained through documentation, workmanship and in-process surveillance while maintaining compliance of all applicable FAR's and OEM standards pertaining to Auxiliary Power Units (APU), aviation parts, material, processes and product for TAT Technologies. Primary Job Functions: Audit work order packages for accuracy and completeness. Perform final inspection and return to service on products delivered to QC. Scrap rejected parts and maintain scrap room. Perform initial inspection on customer repair orders to gather information to have the work order opened. Additional Job Functions: Perform receiving inspection on stockroom parts. Participate in the monthly internal audits as directed. Assist with build check points as needed. Assist Calibration/Librarian technician as needed. Other Quality related functions as directed by Crew Chief, Chief Inspector or Director of Quality Requirements Two-year Technical school degree or higher and/or equivalent experience. Technical Degree in Aerospace advantageous. 5-years' experience in aviation components, preferred. Airframe & Powerplant (A&P) License recommended. Able to obtain Repairman Certificate within 3 months of hire date if not a current Licensed A&P Thorough working knowledge of and ability to interpret FAA regulations. Experience with FAA manuals and government forms. Proficient in the use of precision measurement equipment related to Aviation Inspection/s Excellent organizational skills are necessary. This job requires exemplary interaction skills with clients and auditors. Demonstrated oral & written communication skills and good telephone manner. Ability to operate standard office equipment and good PC skills (MS Word, Excel, Outlook & Quantum). Overtime and shift/schedule flexibility, required Benefits TAT Technologies is dedicated to providing an inclusive, fun, and unique workplace. We believe in acknowledging and appreciating the value of our team members. One way we value our team is by providing a comprehensive and expansive benefits offering to include Major Medical, Dental, Vision, Life, 401K with company matching, STD, LTD, accidental coverages, EAP, and more. Insurance carriers vary based on location. Equal Employment Opportunities - TAT TECHNOLOGIES is committed to maintaining a supportive, healthy, and productive work environment free from discrimination, harassment, or bullying, and complying with all legislative requirements. This includes equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, genetic information, marital status, amnesty, or status as a covered veteran.

The Inspector at Cook Winston-Salem is responsible to inspect products according to regulated procedures. Responsibilities • Inspect products and or components per detailed specifications and/or drawings for quality, which includes, but is not limited to the following: - Visually, dimensionally and functionally inspect product - Determine whether the product is acceptable using prescribed standards - Complete all necessary documentation • Assist in training new employees in the department • Perform daily and weekly cleaning • Perform other duties as assigned • Ability to read, write, and understand product specifications, drawings, work orders, labels and quality forms written in English • Ability to use a variety of testing equipment including small measuring devices • Maintain regular and punctual attendance • Must maintain company quality and quantity standards Qualifications • High School Diploma or GED • Minimum 18 years of age Physical Requirements: • Must be able to perform the essential functions of the job, with or without reasonable accommodations • Majority of work is conducted in a “controlled” environment • Visual Acuity to work with small parts • Majority of day is spent sitting and walking within various departments • Ability to occasionally lift up to 10lbs 90% of day; remaining 10% able to co-carry up to 35lbs • Ability to perform fine manipulation with hands e.g. grasping, pinching pulling

The QA Inspector works closely with the Quality, Manufacturing and Warehouse departments to assure that all in-coming, in-process and out-going product meet specifications, are inspected on a timely basis and that documentation is correct. Essential Duties and Responsibilities Receiving inspection and test of raw materials, components and supplies, per procedure. Pulls product samples for testing and inspection. Performs product audits, visual and dimensional inspections and testing using gauges and other equipment. Informs Quality Supervisor, QA Manager and Manufacturing Manager of any failures. Must follow current Good Manufacturing Practices at all times. Generates Product Certs and necessary by assuring and completeness of DHR's. Keeps accurate records of inspection through the use of inspections sheets, charts, and computer and maintains there records through a filing system (DHR). Assists Team Members as required. Performs QA Data entry. Read and interpret part drawings and Quality Plans. Makes sure all records on each lot or product are correct and filed properly. Assists the Warehouse department by having finished product ready to ship on schedule. Collect, document and store product retains. Maintains a neat, safe and clean work area. Supports quality system objectives. Follows all QA procedures and work instructions as applicable. Perform other duties as requested. BENEFITS WE OFFER - Paid time off, 11 Paid Holidays, 401K after 90 days, Shift Differential, Referral bonus program, hourly bonus program, quarterly perfect attendance, Medical (PPO or High Deductible), Dental, Vision, Short term disability, long term disability, group life insurance, supplemental life for employee, spouse and children, critical illness, accident coverage, hospital indemnity, Employee Assistance Program, Education assistance, paid jury duty, bereavement leave, service award program Qualifications Required Competencies, Skills and Experience Strong attention to detail. Familiarity of inspection tools and gages. Knowledge of computers/software. Preferred Skills Strong math and communication skills. Education and Job Experience Requirements High school diploma or GED required. Minimum 2 years' experience in Quality Control. Work Environment and Physical Demands Must be able to lift up to 25 lbs. While performing the duties of this job, the associate may be exposed to equipment and moving mechanical parts. The employee is occasionally exposed to fumes or airborne particles. Employee may be exposed to extreme temperatures and humidity. While performing the duties of this job, the employees is regularly required to use hands to handle, or feel objects, tools, or controls. The employee frequently is required to talk, hear and use machinery; reach with hands and arms; and grasping with hands. The employee is frequently required to sit, walk; bend; twist; push and pull; stoop, twist; and crouch. Employee is occasionally required to stand, squat; climb; and kneel. The work environment and physical demands detailed above are representative of those encountered while performing the essential functions of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job. Disclaimer The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time as needed.

Job Description For 40 years, our team at Southern Fasteners & Supply, a subsidiary of Supply Technologies, has been delivering quality parts and service to a diverse base of MRO and OEM customers. We are looking for a motivated, energetic person that wants a career not just a job. We work with, and supply, many high-profile customers, so a desire to be the best you can be is important. Our growing company is a top supplier of fasteners to several Fortune 500 companies Job Summary: We are seeking a diligent and detail-oriented Quality Inspector to join our team and ensure our products meet the highest standards of quality. The Quality Inspector will be responsible for conducting inspections of products and material per the required procedures, processes and specifications, including but not limited to customer specific requirements and specifications. We are seeking a talented Quality Inspector to join our team. The Quality Inspector is responsible for the following: Responsibilities: Perform visual and dimensional inspections of fasteners to ensure compliance with specifications Utilize precision measurement tools such as calipers, micrometers and gages Identify and document any non-conformities or defects Record and analyze inspection data and prepare detailed reports Collaborate with Purchasing, Sales and Supplier to resolve quality issues Ensure adherence to all safety and quality standards and regulations Maintain a clean and organized inspection area Maintain files according to policies and procedures Proactively identify and propose process improvements to create efficiencies where possible Must Haves: High school diploma or equivalent Strong attention to detail and accuracy Strong organizational skills with the ability to maintain a clear focus on all priorities. Good understanding of quality control standards and practices Basic computer skills for data entry and report generation WE Value: Previous experience in quality inspection or quality control Ability to read and interpret blueprints and technical drawings Proven ability and experience working with data and having a high degree of accuracy Proficient communication skills both written and verbal. OUR Team Members: Do The Right Thing and we will succeed: We insist on honest and ethical behavior; We treat others respectfully; Our actions are underlined with high integrity; We partner with others who hold these same values. Go One Better to achieve greatness: We strive to do our best every day; We are curious and seek alternative viewpoints; We value innovation to deliver long-term success; We will not accept the status quo and tirelessly seek to improve. Customer First balanced with Company results: We serve our customers with a sense of urgency; We strive to anticipate our customer's needs; We work with our customers to ensure we are providing them the best solutions they value; We help to deliver the long-term success of our company. WE DO what we say: We seek clarity and understanding; We follow through on our commitments; We respectfully challenge and collaborate to achieve mutual success; Once we agree, we move forward and make no excuses. Together we win: We respect and value each other's thoughts and opinions; We make the time to develop meaningful relationships; We seek new opportunities to continuously learn: We never miss an opportunity to bring out the best in others. Make a career at SUPPLY TECHNOLOGIES: Career Development: Success starts from within, and we will help you chart your path from which you can enhance your career evolution. Supply Technologies provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. Job Type: Full-time Benefits: Medical insurance Health saving account Dental insurance Vision insurance Life insurance 401(k) Pension Plan Paid time off Referral program Tuition reimbursement Employee Assistance Work Location: On Site ( Winston-Salem, NC) Make a career at Southern Fasteners/Supply Technologies: Career Development: Success starts from within, and we will help you chart your path from which you can enhance your career evolution.

Job Description Monday - Thursday 5:00pm-5:00am with a 15% SHIFT PREMIUM! Machine Specialties, LLC is a leading contract machining and metal finishing company that designs an manufactures sophisticated, cost-effective solutions to meet our clients' most demanding challenges. Our company is located in Whitsett, NC, about 8 miles outside of Greensboro, NC. We are currently looking for a Quality Inspector to join our team. The Quality Inspector is responsible for completing final inspections prior to shipment, as well as in process inspections to support shop manufacturing. This role involves conducting inspections, testing, and documenting findings to maintain compliance with regulatory and company requirements. This is an hourly position that will report directly to the Quality Inspection Manager. Position Responsibilities Study and interpret product specifications to ensure product conformity Establish inspection plans and part acceptance criteria based on drawing requirements and customer feedback. Examine manufactured products, primarily aerospace machined parts, to ensure they parts meet all standards of presentation and quality Identify and communicate existing and potential quality issues Perform dimensional inspection on machined parts using a variety of precision metrology instruments such as height gages, micrometers, bore gages, etc. Collect and record data regarding defects Document and process nonconforming product Demonstrate flexibility within a fast-paced challenging environment Ability to coordinate, prioritize, and multitask Identify non-conforming materials and products, document discrepancies, and participate in root cause analysis and corrective action processes. Participate in continuous improvement initiatives to enhance the efficiency and effectiveness of the inspection and quality control processes. Follow all safety protocols and procedures to maintain a safe working environment. General Expectations Be responsible for the productivity and quality of your work and work performed in support of teams. Share skills, knowledge and experience so that common goals are achieved Continuously strive to develop skills and abilities Maintain schedule and communicate effectively with others Required Training/Education/Experience High school diploma or GED equivalent required Minimum 3 years inspection experience Machining experience preferred. Aerospace manufacturing experience is preferred. Must be able to pass a vision test, eyeglasses or contacts are acceptable. Equal Opportunity Employer including Veteran's/Disabilities

Discover your exciting role The primary responsibilities of this position include conducting : visual inspections, checking coating thicknesses, spark testing of all coated surfaces; repairs. All listed duties are to be conducted in accordance to Fab Tech's set standards & meet all FM criteria. Explore your tasks and responsibilities * Conduct thorough visual inspections to ensure aesthetics of all parts meet Fab Tech's high quality criteria standards * Inspector will responsible for ensuring that coating thickness of parts meet mil thickness specification * Coating inspector will spark test all coated surfaces to ensure all coated surfaces within set parameters are free of defects * Coating inspectors will also be responsible for making judgement calls determining whether product needs to be reworked/repaired * Individual will be responsible for performing manual repairs on all defected parts Show your expertise POSITION REQUIREMENTS * Minimum high school diploma or equivalent. * Ability to stand on feet for up to 10 hrs. daily * Must be able to work in a fast paced work environment * Position requires the ability to make independent decisions based on standards * Attention to detail is a must * Gloves need to be worn during all visual; spark testing procedures * Note: Must pass PFT; RFT in order to wear 7700 series respirator Personal Attributes * Independent * Dependable, determined, positive in demeanor * Attention to detail. * Team player * Good attitude Physical Demands * Frequent standing, sitting, bending at the waist, and use of hands in this role is required * Specific vision abilities required to include close vision, and the ability to adjust focus * Occasionally perform physical activities including lifting (up to 50 lbs. unassisted) Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. The noise level in the production area is usually moderately loud. The Blast department is a sectioned off area of the production floor. Various blasting, grinding, inspecting and welding tasks are performed within the Blast department. * Safety glasses and hearing protection are required when in the production area * PPE covering eyes and skin is required when welding or heat induced cutting * PPE specific to tasks being performed is required Non-Solicitation We are not currently accepting third-party agency candidates for this position. Any agency candidate submitted to any employee of Exyte or TFS may be contacted by Exyte or TFS without obligation to the third-party agency. Employment Sponsorship Applicants must be authorized to work for any employer in the U.S. We are unable to sponsor employment visas at this time. EEO Statement Exyte US, Inc. and its subsidiaries are proud to be an Equal Employment Opportunity employer that is committed to supporting an inclusive workplace where associates excel based on personal merit, qualifications, experience, ability, and job performance. We prohibit discrimination and harassment of any kind based on race, color, religion, age, sex (e.g., pregnancy, childbirth and related medical conditions, sexual orientation, gender identity), national origin, disability, genetic information, protected veteran status, or any other protected characteristic as outlined by applicable federal, state, or local laws. Contact: You want to be part of the Exyte team? We look forward to receiving your application! For further questions and information, please do not hesitate to contact Clinton Crellin via E-Mail at ************************* Please note that we only consider applications submitted through our application portal. Applications sent via email will not be considered due to data protection regulations.

Job Description CEI Inspectors S&ME is looking for Construction Engineering and Inspection (CEI) Inspectors to support our Transportation group across North Carolina, including Asheville, Charlotte, Greensboro, Raleigh, Wilmington, and nearby regions. In this role, you'll help ensure that vital infrastructure projects-such as highways, bridges, greenways, airports, ports, and rail systems-are built to meet safety, quality, and regulatory benchmarks. Your knowledge and attention to detail will safeguard compliance and uphold excellence throughout the construction process. What You Will Do: As a CEI Inspector, you'll play a critical role in overseeing contractor activities and ensuring the successful completion of projects. You may make key technical decisions and work independently or as part of a team on projects. Monitor contractor operations to confirm projects are executed according to approved plans, specifications, and safety requirements. Supervise activities including grading, paving, bridge work, and traffic control. Evaluate erosion control practices and environmental standards, while conducting material sampling and quality assurance testing. Prepare thorough daily inspection logs, track contractor performance, and manage payment documentation. Perform calculations, record material quantities, and verify project schedules remain on track. Participate in progress and safety meetings, collaborating with contractors, engineers, and stakeholders to address challenges. Conduct DBE/EEO compliance reviews to ensure workforce inclusivity and adherence to equal opportunity standards. Pay is hourly plus overtime and commensurate with experience, with additional incentives available for candidates who hold relevant certifications. Qualifications: High school diploma or GED required. Prior experience in highway construction or inspection. A technical degree in Civil Engineering Technology or Surveying Technology may substitute for one year of experience. Active NCDOT certifications such as QMS Roadway, Conventional Density, Concrete Field Technician, Erosion Control Level II, and/or Nuclear Gauge. Strong English communication skills (oral and written). Solid math skills with knowledge of weight, volume, pressure, and measurement units. Flexibility to work variable schedules and willingness to travel as needed. Work Environment: This is a physically demanding, outdoor role requiring the use of company-issued PPE. Inspectors will work in all weather conditions, traverse uneven terrain, stand for extended periods (up to 12 hours), and lift/carry 40-50 lbs. of materials and equipment. The position involves exposure to highway traffic, heavy machinery, and active construction sites, with potential for long hours, weekends, and holidays. We Are S&ME: At S&ME, we're committed to your growth, professionally and personally. With over 50 years of experience delivering innovative solutions in geotechnical, civil, environmental, and construction materials engineering, we've built a strong foundation for long-term careers. Our team of 1,000+ employee-owners across 10+ states works together to create meaningful impact for our clients and communities. When you join S&ME, you become part of a collaborative, honest, and people-focused culture that invests in your success. We offer exciting project opportunities, ongoing training, and a comprehensive benefits package to support you and your family. This is more than a job; it's a place to grow, thrive, and build a future. What We Offer: Comprehensive Health & Wellness Programs Medical, Dental & Vision Plans with HSA and FSA options - plus no medical premium increase in 2026 Wellness Program offering $50 off per month on 2027 premiums Pet Insurance for your furry family members Ownership & Financial Perks 100% Employee Stock Ownership Plan (ESOP) with a 5% company contribution 401(k) Retirement Plan to help you plan ahead Term Life & Long-Term Care Coverage - available Spring 2026 Work-Life Balance & Career Development Paid Holidays, PTO with rollover options, and Paid Maternity & Paternity Leave Mentorship & Career Development Programs, Tuition Reimbursement, and Credential Incentive Program Employee Recognition Program, $2,000 Referral Bonuses, and company vehicle & fuel card for project-based roles If you're passionate about making an impact and want to work with a firm committed to our employees and providing quality service to our clients, we'd love to hear from you! This full-time role offers competitive pay based on experience. Candidates must comply with our Fleet Management, Substance Policy, and Reference Check requirements. Only candidates with valid employment eligibility (I-9) will be considered. Visa assistance is not available. S&ME reserves the right to hire internally or externally at any time. No candidate/recruiter calls, personal calls, or walk-ins are accepted. #yadkinville #elkin #lewisville #mocksville Job Posted by ApplicantPro

TAT Technologies (Greensboro facility) is part of a multi-site, global aerospace company dedicated to our customer experience of exceeding expectations. We are the leading APU leasing and repair station for key commercial and military aircraft solutions with over 50 years of experience in the industry. We have an ambitious and fast-growing environment that believes in the power of team collaboration with the deep-rooted belief that there is no substitution to personal relationships and interactions. We offer a flexible work environment enabling talented individuals to fulfill their development goals through drive, energy, and passion for the customer. TAT Technologies is looking for a qualified Quality Inspector (APU). This position will ensure quality is maintained through documentation, workmanship and in-process surveillance while maintaining compliance of all applicable FAR's and OEM standards pertaining to Auxiliary Power Units (APU), aviation parts, material, processes and product for TAT Technologies. Primary Job Functions: Audit work order packages for accuracy and completeness. Perform final inspection and return to service on products delivered to QC. Scrap rejected parts and maintain scrap room. Perform initial inspection on customer repair orders to gather information to have the work order opened. Additional Job Functions: Perform receiving inspection on stockroom parts. Participate in the monthly internal audits as directed. Assist with build check points as needed. Assist Calibration/Librarian technician as needed. Other Quality related functions as directed by Crew Chief, Chief Inspector or Director of Quality Requirements Two-year Technical school degree or higher and/or equivalent experience. Technical Degree in Aerospace advantageous. 5-years' experience in aviation components, preferred. Airframe & Powerplant (A&P) License recommended. Able to obtain Repairman Certificate within 3 months of hire date if not a current Licensed A&P Thorough working knowledge of and ability to interpret FAA regulations. Experience with FAA manuals and government forms. Proficient in the use of precision measurement equipment related to Aviation Inspection/s Excellent organizational skills are necessary. This job requires exemplary interaction skills with clients and auditors. Demonstrated oral & written communication skills and good telephone manner. Ability to operate standard office equipment and good PC skills (MS Word, Excel, Outlook & Quantum). Overtime and shift/schedule flexibility, required Benefits TAT Technologies is dedicated to providing an inclusive, fun, and unique workplace. We believe in acknowledging and appreciating the value of our team members. One way we value our team is by providing a comprehensive and expansive benefits offering to include Major Medical, Dental, Vision, Life, 401K with company matching, STD, LTD, accidental coverages, EAP, and more. Insurance carriers vary based on location. Equal Employment Opportunities - TAT TECHNOLOGIES is committed to maintaining a supportive, healthy, and productive work environment free from discrimination, harassment, or bullying, and complying with all legislative requirements. This includes equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, genetic information, marital status, amnesty, or status as a covered veteran.

Discover your exciting role The primary responsibilities of this position include conducting : visual inspections, checking coating thicknesses, spark testing of all coated surfaces; repairs. All listed duties are to be conducted in accordance to Fab Tech's set standards & meet all FM criteria. Explore your tasks and responsibilities * Conduct thorough visual inspections to ensure aesthetics of all parts meet Fab Tech's high quality criteria standards * Inspector will responsible for ensuring that coating thickness of parts meet mil thickness specification * Coating inspector will spark test all coated surfaces to ensure all coated surfaces within set parameters are free of defects * Coating inspectors will also be responsible for making judgement calls determining whether product needs to be reworked/repaired * Individual will be responsible for performing manual repairs on all defected parts Show your expertise POSITION REQUIREMENTS * Minimum high school diploma or equivalent. * Ability to stand on feet for up to 10 hrs. daily * Must be able to work in a fast paced work environment * Position requires the ability to make independent decisions based on standards * Attention to detail is a must * Gloves need to be worn during all visual; spark testing procedures * Note: Must pass PFT; RFT in order to wear 7700 series respirator Personal Attributes * Independent * Dependable, determined, positive in demeanor * Attention to detail. * Team player * Good attitude Physical Demands * Frequent standing, sitting, bending at the waist, and use of hands in this role is required * Specific vision abilities required to include close vision, and the ability to adjust focus * Occasionally perform physical activities including lifting (up to 50 lbs. unassisted) Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. The noise level in the production area is usually moderately loud. The Blast department is a sectioned off area of the production floor. Various blasting, grinding, inspecting and welding tasks are performed within the Blast department. * Safety glasses and hearing protection are required when in the production area * PPE covering eyes and skin is required when welding or heat induced cutting * PPE specific to tasks being performed is required Non-Solicitation We are not currently accepting third-party agency candidates for this position. Any agency candidate submitted to any employee of Exyte or TFS may be contacted by Exyte or TFS without obligation to the third-party agency. Employment Sponsorship Applicants must be authorized to work for any employer in the U.S. We are unable to sponsor employment visas at this time. EEO Statement Exyte US, Inc. and its subsidiaries are proud to be an Equal Employment Opportunity employer that is committed to supporting an inclusive workplace where associates excel based on personal merit, qualifications, experience, ability, and job performance. We prohibit discrimination and harassment of any kind based on race, color, religion, age, sex (e.g., pregnancy, childbirth and related medical conditions, sexual orientation, gender identity), national origin, disability, genetic information, protected veteran status, or any other protected characteristic as outlined by applicable federal, state, or local laws. Contact: You want to be part of the Exyte team? We look forward to receiving your application! For further questions and information, please do not hesitate to contact Clinton Crellin via E-Mail at ************************* Please note that we only consider applications submitted through our application portal. Applications sent via email will not be considered due to data protection regulations.

TAT Technologies (Greensboro facility) is part of a multi-site, global aerospace company dedicated to our customer experience of exceeding expectations. We are the leading APU leasing and repair station for key commercial and military aircraft solutions with over 50 years of experience in the industry. We have an ambitious and fast-growing environment that believes in the power of team collaboration with the deep-rooted belief that there is no substitution to personal relationships and interactions. We offer a flexible work environment enabling talented individuals to fulfill their development goals through drive, energy, and passion for the customer. TAT Technologies is looking for a qualified Quality Inspector (APU). This position will ensure quality is maintained through documentation, workmanship and in-process surveillance while maintaining compliance of all applicable FAR's and OEM standards pertaining to Auxiliary Power Units (APU), aviation parts, material, processes and product for TAT Technologies. Primary Job Functions: * Audit work order packages for accuracy and completeness. * Perform final inspection and return to service on products delivered to QC. * Scrap rejected parts and maintain scrap room. * Perform initial inspection on customer repair orders to gather information to have the work order opened. Additional Job Functions: * Perform receiving inspection on stockroom parts. * Participate in the monthly internal audits as directed. * Assist with build check points as needed. * Assist Calibration/Librarian technician as needed. * Other Quality related functions as directed by Crew Chief, Chief Inspector or Director of Quality

Job Description CEI Inspectors S&ME is looking for Construction Engineering and Inspection (CEI) Inspectors to support our Transportation group across North Carolina, including Asheville, Charlotte, Greensboro, Raleigh, Wilmington, and nearby regions. In this role, you'll help ensure that vital infrastructure projects-such as highways, bridges, greenways, airports, ports, and rail systems-are built to meet safety, quality, and regulatory benchmarks. Your knowledge and attention to detail will safeguard compliance and uphold excellence throughout the construction process. What You Will Do: As a CEI Inspector, you'll play a critical role in overseeing contractor activities and ensuring the successful completion of projects. You may make key technical decisions and work independently or as part of a team on projects. Monitor contractor operations to confirm projects are executed according to approved plans, specifications, and safety requirements. Supervise activities including grading, paving, bridge work, and traffic control. Evaluate erosion control practices and environmental standards, while conducting material sampling and quality assurance testing. Prepare thorough daily inspection logs, track contractor performance, and manage payment documentation. Perform calculations, record material quantities, and verify project schedules remain on track. Participate in progress and safety meetings, collaborating with contractors, engineers, and stakeholders to address challenges. Conduct DBE/EEO compliance reviews to ensure workforce inclusivity and adherence to equal opportunity standards. Pay is hourly plus overtime and commensurate with experience, with additional incentives available for candidates who hold relevant certifications. Qualifications: High school diploma or GED required. Prior experience in highway construction or inspection. A technical degree in Civil Engineering Technology or Surveying Technology may substitute for one year of experience. Active NCDOT certifications such as QMS Roadway, Conventional Density, Concrete Field Technician, Erosion Control Level II, and/or Nuclear Gauge. Strong English communication skills (oral and written). Solid math skills with knowledge of weight, volume, pressure, and measurement units. Flexibility to work variable schedules and willingness to travel as needed. Work Environment: This is a physically demanding, outdoor role requiring the use of company-issued PPE. Inspectors will work in all weather conditions, traverse uneven terrain, stand for extended periods (up to 12 hours), and lift/carry 40-50 lbs. of materials and equipment. The position involves exposure to highway traffic, heavy machinery, and active construction sites, with potential for long hours, weekends, and holidays. We Are S&ME: At S&ME, we're committed to your growth, professionally and personally. With over 50 years of experience delivering innovative solutions in geotechnical, civil, environmental, and construction materials engineering, we've built a strong foundation for long-term careers. Our team of 1,000+ employee-owners across 10+ states works together to create meaningful impact for our clients and communities. When you join S&ME, you become part of a collaborative, honest, and people-focused culture that invests in your success. We offer exciting project opportunities, ongoing training, and a comprehensive benefits package to support you and your family. This is more than a job; it's a place to grow, thrive, and build a future. What We Offer: Comprehensive Health & Wellness Programs Medical, Dental & Vision Plans with HSA and FSA options - plus no medical premium increase in 2026 Wellness Program offering $50 off per month on 2027 premiums Pet Insurance for your furry family members Ownership & Financial Perks 100% Employee Stock Ownership Plan (ESOP) with a 5% company contribution 401(k) Retirement Plan to help you plan ahead Term Life & Long-Term Care Coverage - available Spring 2026 Work-Life Balance & Career Development Paid Holidays, PTO with rollover options, and Paid Maternity & Paternity Leave Mentorship & Career Development Programs, Tuition Reimbursement, and Credential Incentive Program Employee Recognition Program, $2,000 Referral Bonuses, and company vehicle & fuel card for project-based roles If you're passionate about making an impact and want to work with a firm committed to our employees and providing quality service to our clients, we'd love to hear from you! This full-time role offers competitive pay based on experience. Candidates must comply with our Fleet Management, Substance Policy, and Reference Check requirements. Only candidates with valid employment eligibility (I-9) will be considered. Visa assistance is not available. S&ME reserves the right to hire internally or externally at any time. No candidate/recruiter calls, personal calls, or walk-ins are accepted. #galax #elkin #fancygap #hillsville Job Posted by ApplicantPro