Inspector jobs in Lowell, MA

Logistics at full potential. At GXO, we're constantly looking for talented individuals at all levels who can deliver the caliber of service our company requires. You know that a positive work environment creates happy employees, which boosts productivity and dedication. On our team, you'll have the support to excel at work and the resources to build a career you can be proud of. 2nd Shift, Monday - Friday, 3:00 PM - 11:30 PM As an Inspector, RIT, you will be responsible to ensure purchased parts, assemblies, accessories and materials conform to specifications, using precision measuring instruments and devices. You'll also examine items for defects in materials, workmanship and damage occurring during transit. Become a part of our growing, dynamic team and we'll help you develop to a level that will exceed your expectations. Pay, benefits and more. We are eager to attract the best, so we offer competitive compensation and a generous benefits package, including full health insurance (medical, dental and vision), 401(k), life insurance, disability and more. What you'll do on a typical day: Inspect incoming or disposition material to align with approved documents, based on statistical sampling Understand the Non-Conforming Event (NCE) system and generate NCEs for non-conformances Identify and segregate non-conforming materials for incoming inspections including setup for sorts and reworks; move non-conforming material to designated area by operating a pallet jack for heavy items Perform part history reviews and First Article inspections Review vendor-supplied documentation, inspection results and inspected material acceptability Assist with tracking work completion; assist with NCE failure investigations, develop action plans and perform effectiveness verifications Maintain compliance to all quality requirements; adhere to the 7S program and quality policy Participate on the team to ensure contract goals and objectives are met What you need to succeed at GXO: At a minimum, you'll need: 1 year of experience in quality assurance or auditing in a distribution, manufacturing or distribution environment Ability to read/understand drawings and related quality procedures; experience working with calibrated measuring instruments Basic skills using electrical and mechanical measurement tools Ability to read and write legibly Ability to interpret specifications to ensure product conformance of mechanical, optical and electrical components Basic math skills (add, subtract, multiply and divide) It'd be great if you also have: Associate or technical degree Experience working with ISO9001; ability to initiate the corrective action process for receivables 3 years of experience as a receiving inspector, including measuring components to drawing specs Certified Mechanical Inspector (CMI) and Certified Quality Technician (CQT), or industry equivalency in years of experience as quality inspector/technician (with documentation) Ability to demonstrate use of digital, dial and Vernier calipers, inside and outside micrometers, and depth and height gauges We engineer faster, smarter, leaner supply chains. #appcastrequest GXO is a leading provider of cutting-edge supply chain solutions to the most successful companies in the world. We help our customers manage their goods most efficiently using our technology and services. Our greatest strength is our global team - energetic, innovative people of all experience levels and talents who make GXO a great place to work. We are proud to be an Equal Opportunity employer including Disabled/Veterans. GXO adheres to CDC, OSHA and state and local requirements regarding COVID safety. All employees and visitors are expected to comply with GXO policies which are in place to safeguard our employees and customers. All applicants who receive a conditional offer of employment may be required to take and pass a pre-employment drug test. The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties and skills required of personnel so classified. All employees may be required to perform duties outside of their normal responsibilities from time to time, as needed. Review GXO's candidate privacy statement here. #appcastrequest

Quality Inspector Amphenol Ardent Concepts is a leading designer and manufacturer of high performance multicoax and coaxial assemblies, connectors, and sockets used in the development of next generation semiconductors and electronics systems. Our core technology is the smallest, fastest, most electrically efficient compression mount connector technology worldwide. As data rate requirements increase and devices and systems shrink, Ardent's products deliver superior signal integrity in a dense footprint that can be reusable across programs to maximize cost savings. RESPONSIBILITIES: The Quality Inspector performs incoming, in process, mechanical and final inspection tasks as assigned. The Quality Inspector performs a wide variety of inspection tasks involving a RAM Optical Vision System and associated hand tools recording results against a defined specification. The inspector determined acceptability and recommends disposition of defective items in accordance with the defined procedures. o Incoming Quality Inspection of components, assemblies, and raw materials utilizing RAM Optical Vision System and general hand tools per the specification assigned. o Perform final inspection on outgoing finished goods and prepare documentation when required. o Process non-conformances and help the MRB team to disposition as required. o Organize and document inspection results and non-conformances. o Communicate directly with vendors, engineering, and purchasing to discuss quality related items. o Assist in vendor specific quality metrics and vendor audits when required. SKILLS & QUALIFICATIONS: o The ideal candidate will have two years Inspection experience o Strong GD&T (General Dimension and Tolerances) a plus o Knowledge of general quality techniques, root cause analysis, and sampling plans. o Ability to read specifications, Solid Works familiarity a plus o Knowledge of measurement equipment, RAM Optical, tools, and gauges o Advanced Personal Computer Skills o Strong communication skills both written and oral o A self-starter who uses initiative and problem identification to find solutions. o Ability to lift up to 70 pounds.

We're looking for a detail-driven Quality Inspector to support precision machining operations in a regulated manufacturing environment. This role plays a key part in ensuring components meet engineering, customer, and quality standards. What You'll Do Inspect machined components of varying sizes using precision tools such as CMMs, micrometers, height gauges, calipers, and bore gauges Perform incoming, in-process, and final inspections to drawings, specifications, and procedures Verify calibration of inspection equipment across the production floor and quality labs Interpret technical drawings and apply GD&T to ensure compliance Support Quality Assurance activities, including internal and external audits Record inspection results, identify trends, and recommend process improvements Collaborate with manufacturing and engineering teams to resolve quality or machining issues Maintain compliance with ISO 9001: 2015 and AS9100 standards Work independently while following established safety and quality procedures Help train and mentor others to strengthen overall team capability What We're Looking For High school diploma or GED 3-5 years of experience in quality inspection within a manufacturing environment Hands-on experience with precision measuring tools and close tolerances (down to .0005) Strong knowledge of GD&T and technical drawing interpretation Experience with AQL sampling and inspection methods (MPI a plus) Ability to select and use the appropriate gauge for each inspection task Comfortable working with analog gauges and cylindrical components Self-motivated, safety-focused, and detail-oriented If you enjoy precision work, problem solving, and being part of a quality-driven manufacturing team, this role offers the chance to make a real impact.

Marlborough, MA, United States **So why join Hologic?** You will have the opportunity to get in on the ground floor at a high growth facility to create a manufacturing process working on life-saving medical devices with potential for future growth. This is a great opportunity to enhance you manufacturing operation skills and knowledge to further your career. The Quality Control Inspector is a critical member of the Quality Assurance team, responsible for ensuring that finished products and in-process components meet all regulatory, quality, and customer requirements before release to inventory. This role involves the meticulous review of Device History Records (DHRs), performing inspections, and providing support to manufacturing and quality processes, such as Incoming Inspection, Material Review Board (MRB), Calibration and Returned Material Authorization (RMA) activities. The Final Inspector 2 is instrumental in upholding Hologic's commitment to excellence by ensuring compliance with Good Manufacturing Practices (GMP), ISO standards, and quality systems, while fostering a culture of continuous improvement and collaboration. **What to expect:** + Lead with Ownership - Demonstrate integrity and always aim to do the right thing. Be highly accountable for your work, follow through on commitments, and take responsibility when things don't go as planned. Embrace opportunities to try new things and learn from mistakes. + Act with Speed - Approach tasks with a strong sense of urgency and a bias toward action. Keep stakeholders informed by providing regular updates early and often, ensuring transparency and avoiding unexpected surprises, even when working at a fast pace. + Foster Partnerships - Collaborate effectively with teammates and stakeholders to achieve shared goals. Invest in building strong working relationships and contribute to efforts that fulfill the organization's Purpose, Promise, and Passion. + Delight Customers - Strive to exceed expectations by delivering high-quality work, exceptional experiences, and innovative solutions. Engage in proactive communication, provide excellent service, and develop a deep understanding of customer needs to create positive, lasting impressions and build trust-based relationships. + Celebrate WINS! - Take pride in delivering impactful results. Contribute to a positive team environment by celebrating both individual and team accomplishments. Support colleagues, recognize collective successes, and embody the mindset of an 'A-player' who inspires others. **What we expect:** + Perform detailed reviews of Device History Records (DHRs) as part of final inspection and release activities for finished products, ensuring accuracy and compliance with documentation standards. + Conduct reviews of manufacturing records for replacement components, subassemblies, and in-process inspections to ensure alignment with quality requirements. + Support manufacturing personnel by ensuring proper documentation of Failure Investigation Reports and processing of Non-Conforming Materials in the Product + Lifecycle Management (PLM) system, including identification, quarantine, and documentation. + Perform routine inspections, including field service and special inspections, to support validations, studies, and incoming inspection activities. + Communicate and reinforce Good Manufacturing Practices (GMP) to manufacturing personnel to uphold quality standards. + Review and provide input on new releases of Inspection and Test documents to ensure adherence to Good Documentation Practices (GDP). + Maintain QA Activity Collection Plans, First Pass Yield reports, and other applicable tracking mechanisms to monitor quality metrics. + Collaborate with Engineering to provide feedback on documentation improvements and process changes. + Support Incoming, product returns and calibration teams as needed as needed. + Perform other duties as assigned by leadership to meet organizational and operational needs. **Education and Experience:** High school degree and/or an equivalent technical school education preferred. Minimum of 3 to 5 years related Quality Inspection experience in Medical Manufacturing environment. Experience with Oracle, and Agile preferred. The annualized base salary range for this hourly role is $46,100-$69,000 and is bonus eligible. Final compensation packages will ultimately depend on factors including relevant experience, skillset, knowledge, geography, education, business needs and market demand. **Agency and Third Party Recruiter Notice:** **Agencies that submit a resume to Hologic must have a current executed Hologic Agency Agreement executed by a member of the Human Resource Department. In addition Agencies may only submit candidates to positions for which they have been invited to do so by a Hologic Recruiter. All resumes must be sent to the Hologic Recruiter under these terms or they will not be considered.** **Hologic, Inc. is proud to be an Equal Opportunity Employer inclusive of disability and veterans.**

Job Description Summary: The Lead Housing Quality Standard (HQS) Inspector is responsible for conducting any mandatory inspection for all leased units under the Rental Assistance Program in accordance to the Department of Housing and Urban Development (HUD) and Department of Housing and Community Development (DHCD) program guidance. As the Lead HQS Inspector the incumbent is expected to assist the Inspections' Supervisor in providing training to newly hired inspectors and with administrative duties as assigned. Why Work for SMOC? Paid Time Off: All full-time employees can accrue up to 3 weeks of vacation, and 2 weeks of sick time and are eligible for 12 paid holidays during their first year of employment. Employer-paid Life Insurance & AD&D and Long-Term Disability for full-time employees. Comprehensive Benefits Package including Medical Plans through Mass General Brigham with an HRA Employer cost-sharing program, Dental Plans with Orthodontic Coverage, and EyeMed Vision Insurance available to full-time employees. 403(B) Retirement Plan with a company match starting on day one for all full-time and part-time employees. Additional voluntary benefits including; Term and Whole Life Insurance, Accident Insurance, Critical Illness, Hospital indemnity, and Short-Term Disability. Flexible Spending Accounts, Dependent Care Accounts, Employee Assistance Program, Tuition Reimbursement and more. Primary Responsibilities: Conduct thorough HUD/DHCD HQS inspections of all SMOC RAPS existing units, potential new units, and the reinspection of those units as required including physical and remote virtual inspections. Verify unit compliance based on health and safety requirements. Verify unit conditions for rent reasonableness comparisons. Enter all inspection data into the MRI Tenmast Software Systems' Inspection module and monitoring information as needed; printing all required inspection-related letters for participating tenants and owners. Assist the Inspection Supervisor in providing "on the job" training for newly hired HQS inspectors in the field Assist the Inspection Supervisor in monitoring the various types of inspections conducted by the HQS Inspection team including remote virtual inspections, re-inspections, inspections conducted using an owner self certification and physical inspections Make recommendations to the Inspection Supervisor on behalf of the HQS inspectors on process and procedure Monitor HQS supplies and make requests to the Program Director on orders for necessary equipment such as gloves, shoe coverings and personal protective equipment as needed Utilize and maintain inspection-related equipment on a regular basis, including camera, hand-held inspection devices or tablets, flashlight, cell phone, tick tester, and inspection-supply cache. Engage all clients by understanding and addressing their needs whether within or outside the scope of work. Attend & participate in engagement team meetings as requested and communicate effectively with clients and staff in other areas. Maintain confidentiality of client, employee and agency information in accordance with federal and state laws and funder requirements. Ensure compliance with program/department, agency and/or funder requirements, as well as SMOC policies & procedures. Other duties as assigned. Knowledge and Skill Requirements: Education: High school diploma or equivalent Minimum years of related experience: 1-2 years preferred Knowledge of Excel, Windows, Word and PCs, ability to work well in a very high volume and productivity environment, ability to handle potentially stressful situations and sensitivity to the needs of economically- disadvantaged clientele. Valid Mass. driver's license and insurance Mobility to use office machines, sitting, standing, ability to lift archive boxes filled with files. Must meet all required DHCD program certifications within 1 year. Organizational Relationship: Directly reports to HQS Inspection Supervisor. Indirectly reports to Program Director, Assistant Director and Division Director. Direct reports of this position are none. Indirect reports of this position are HQS Inspectors. Physical Requirement: Physical effort required to do the job: Mobility to use office machines, sitting, standing, ability to lift archive boxes filled with files. Working Conditions: This job requires working in many different conditions and places. About 80% of the time is outside the office either on the road or at a tenant's unit. Therefore, conditions range from an office environment to an outdoor environment that can be dirty, wet, cold, hot, difficult and risky. As part of the responsibilities of this position, the Lead Inspector will have direct or incidental contact with clients served by SMOC in various programs funded or administered through the Executive Office of Health and Human Services. A successful background check is required. Remote Work Option: Remote work is permissible in some positions at SMOC depending on the key functions and responsibilities. The Lead Inspector position is eligible to work from home 0% of the week in scheduling coordination with the department manager. Monday-Friday; 9am-5pm 35

Reads and interprets work instructions and blueprints to determine dimensions and tolerances. Interprets Geometric Dimensioning & Tolerance. Measures, inspects, tests and verifies machined, welded and finished parts for conformance to specifications. Manually operates CMM's, height gages, comparator, etc. Provides support for quality projects dictated by the Quality Leadership. ESSENTIAL FUNCTIONS AND RESPONSIBILITIES Supports First Piece, In-Process, Final, and F.A.I. Inspections. Reads blueprints or specifications to determine dimensions and tolerances. Verifies specified dimensions of product or raw material using verniers, micrometers, intramics, CMM, height gages, comparator, scales and or/other tools. Measures angular dimensions, radii, height, thickness, location, thread lead, and other specifications. Computes angles, radii, and other unspecified dimensions of work piece by using sine bars. Measures surface finish of parts. Inspects first run parts and assemblies. Examines material or product for surface defects such as cracks, pits, and incomplete welds. Tests units for fit of moving parts and mechanical functioning. Tests parts for hardness. Compares product with parts list or sample model to ensure completion of assembly. Rejects defective parts, and marks type of defect on part, container of parts, or inspection tag. Writes reports regarding inspection and testing results. Manually operates and sets up Mitutoyo CMM's and FARO Arm. Supports inspection duties, quality objectives, and the Quality Management System. Studies blueprints, sketches, drawings, manuals, specifications, or sample part to determine dimensions and tolerances of finished work piece, sequence of operations, and setup requirements. Verifies conformance of finished work piece to specifications. Assists in other areas in support of product conformity. Facilitates effective communications and working relationships (including answering department phone). Demonstrates responsibility and accountability for creating a professional, safe, and clean environment evidenced by: being at work on time to perform assigned duties, following the policies of Granite State Manufacturing, always wearing safety glasses in designated areas, maintaining a neat and orderly work area, and following safety practices to prevent errors. Demonstrates commitment to teamwork by establishing effective relationships and networks with both managers/directors and workers, and collaborating with them to accomplish shared purposes and goals. Abides by GSM Code of Ethics and Business Conduct standards and strictly observes all U.S. and foreign laws and regulations. Requirements Two-year certification from college or technical school; or 5 years related experience and/or training; or equivalent combination of education and experience. Ability to manually operate and set up Mitutoyo CMM's. Must know how to interpret Geometric Dimensioning & Tolerance. Must have the ability to work as a team player in a group or team environment and must be able to work independently without supervision. Must be flexible enough to work in all areas of operation per the direction of the Leadership. A personal and professional background sufficient to secure a Government Security Clearance is required. Advanced knowledge of inspection, plating & coating processes and raw materials a plus. AAP/EEO STATEMENT Granite State Manufacturing (GSM) is an affirmative action and equal opportunity employer. GSM does not discriminate on the basis of race, color, religion, sex, gender, gender identity or expression, national origin, citizenship, veteran status, age, physical or mental disability, genetic information, marital status, sexual orientation, or any other consideration made unlawful by applicable federal, state, or local laws in its programs, activities, or emp Benefits Granite State Manufacturing offers a comprehensive benefits package to all GSM employees. Health & Wellness Programs Health Insurances (Medical, Dental, & Vision) Flexible Spending Accounts (FSA) Basic & Optional Life Insurance Short & Long Term Disability Employee Assistance Program Voluntary Worksite Benefits 401k Retirement Plan Paid Leave Tuition Reimbursement Workers Compensation …and much more.

Summary of Primary Responsibilities: The QC Incoming Inspector completes all activities required to approve raw materials for use in product manufacture. The position also performs inspection activities during in-process manufacturing. Specific Responsibilities: Perform quality line clears and in process inspections during the inspection and packing processes according to specific SOP requirements Issue lot numbers and control labels for incoming raw materials; perform inspections per internal procedures and specifications Release approved raw materials for use in manufacturing process to include completion of associated documents, notice of approval form (bin card) and relabeling of inventory Review MPS of other incoming inspectors for approval and release. Monitor and perform annual retain inspection; coordinate required retesting with QC; complete required documentation Perform OOS investigations and participate in MRB as required for rejected materials Perform as SME for the function and provide training as required to new employees, contractors and other QA personnel Perform biennial review for designated procedures and MPS as needed Documents; author and complete DCR as required Document all work activities according to Good Documentation Practices Maintain current training on all assigned procedures to include read & understood, skills development and classroom training activities as required Participate in other projects as assigned Job Complexity: The position works on assignments that are routine in nature and receives detailed instruction on all work. Supervisory Responsibilities: None Required Qualifications: Associates degree in the life science or relevant work experience 0 - 1 year of experience in a cGMP facility or previous experience in a QA/QC role within the industry; internship experience considered Experience using Microsoft Office or an ERP system Desired Experience, Knowledge, and Skills: Bachelor's degree preferred Experience working in a clean room environment Excellent communication and documentation skills The salary range provided is based on the Company's reasonable estimate of the base salary pay range for this position at the time of posting. Actual base pay is determined by several factors relevant to the position, including skills, competencies, experience, education, and geographic location. Anika also offers a discretionary bonus program for all full-time employees, comprehensive healthcare benefits, health savings account, 401(k) plan with up to 5% company match which includes immediate vesting, employee stock purchase plan at a 15% discount, accrued paid time off, additional long-term incentives including stock awards, and much more. At Anika, we take pride in offering robust Total Rewards, inclusive of market-leading benefits to meet our employees where they are in their career and in life. The compensation and benefits information is provided as of the date of this posting. Anika reserves the right to modify compensation and benefits at any time, subject to applicable law.

JOIN AN INDUSTRY LEADER! Quality First & Green Always Sloan is the world's leading manufacturer of commercial plumbing systems and has been in operation since 1906. We are at the forefront of the green building movement and provide sustainable restroom solutions. We manufacture water- efficient products including flush valves, electronic faucets, soap dispensing and sink systems along with vitreous china fixtures for commercial, industrial and institutional markets worldwide. About the Role: We have an opening for a Quality Control Inspector II position based out of our Andover, MA location and will report to our VP of Global Quality Assurance. The Quality Control Inspector II will test and inspect components and finished devices as defined by work instructions and/or engineering specifications. This role will also report non-conformances, monitor critical equipment and instrumentation to ensure proper orientation and calibration, and complete first article inspection. What you'll do: * Inspect / test production components and subassemblies in accordance with procedures, specifications and mechanical drawings. * Perform First Article Inspections. * Perform final product inspection and test. * Maintain calibration program - monitor / track critical equipment and instrumentation for all departments to ensure proper orientation and calibration, coordinate with outside calibration house, maintain records and perform in house calibrations. * Maintain and post inspection results in quality inspection database. * Assist in writing and updating inspection procedures, protocol and checklists. * Assist shipping department by receiving parts after normal hours. * Communicate with suppliers for miscellaneous quality items - i.e. material certifications, dimensional issues. * Participate in root cause analysis and report on findings. * Other duties and responsibilities as required. What we're looking for: * High School Diploma or GED * 4+ Years Relevant Experience * 4+ Years Gage calibration * 4+ Years Layout inspection using GD&T * Basic math skills. * Demonstrates clear, professional, and respectful verbal and written communication in all interactions, consistent with an inclusive work environment. * General experience working with Microsoft Word. * General experience working with Microsoft Excel. * General experience working with 3D CAD software, CMM and/or optical comparator * Mechanical aptitude. * Must have ability to effectively communicate in English including reading, writing, speaking and listening. * Technical training required in lieu of Associate Degree * Working knowledge or measuring instruments such as CNC video measuring systems, calipers, comparator, DMM, pin gages, force gage, drop indicator, surface tester, gage blocks, depth gage, durometer and thread gages. A plus, but not required: * Associate Degree * Hazardous Waste & USDOT Hazardous Materials * Power Industrial Truck * General experience working with SAP ERP Business System * Experience with power tools such as drill press Why you'll love working here: Inclusive Culture: YOU Belong at Sloan. At Sloan, we are committed to fostering an inclusive and diverse workplace where diverse backgrounds and perspectives are embraced and celebrated. We proudly offer equal employment opportunities regardless of race, color, religion, sex, sexual orientation, gender identity and expression, national origin, disability, age, genetic information, marital status, political affiliation, veteran status, or any other characteristic protected by law. Growth Opportunities: We invest in our employees' professional development with ongoing training and career advancement opportunities. Innovative Projects: Be part of exciting projects that push the boundaries of technology and have make a real difference in the world. Compensation: The compensation range for this U.S.-based position is $62,370 - $69,300 annually. Our compensation range reflects our good faith estimate of what an ideal candidate can expect, but final agreed upon compensation will always be based on the individual candidate's experience, skills, qualifications, and other job-related or market factors that may prove relevant during the hiring process. Benefits: * Comprehensive Health Coverage: Medical (including prescription coverage), Dental, and Vision Insurance, effective the first of the month following your hire date. * Health Savings Account (HSA): With company contributions for most medical plan options. * Financial Security: Basic Life, Basic Accidental Death and Dismemberment, Short-term Disability, Long-term Disability, and Accident Insurance. * Additional Protection: Optional Life, Critical Illness, Hospital Indemnity, Legal, Pet Insurance, and Identity Theft Protection. * Convenient Commuter Benefits: Save on your daily commute. * Flexible Spending Accounts: Dependent Care FSA to help manage your expenses. * Wellness Support: Employee Assistance Plan and Wellness Programs to keep you healthy and happy. * Retirement Savings: 401(k) Retirement Savings Plan with a company match and immediate vesting. * Generous Time Off: Paid Holidays, Volunteer Time Off, Paid Time Off, Sick Leave, Military Leave, Parental Leave, Bereavement Leave, and other paid or unpaid state/local leaves where required. * Work-Life Balance: Hybrid Work Program to support your flexibility. * Employee Referral Program: Earn rewards for referring great talent. * Professional Development: Tuition Reimbursement Program to help you grow your skills. * Community and Networking: Join our Employee Business Groups and connect with colleagues. We Are Proud Partners With the Chicago Cubs We are a Legacy Partner of the Chicago Cubs and we are proud to be the organization's official water efficiency partner! Through this relationship, which includes the naming rights to Sloan Park, the Cubs' Spring Training facility in Mesa, Arizona, we have had the opportunity to promote our brand and continue our water conservation efforts in the city of Chicago and around the world. JOIN AN INDUSTRY LEADER! For additional company information please visit our website at

Acute Care TechnologySee attached Job Description At ZOLL, we're passionate about improving patient outcomes and helping save lives. We provide innovative technologies that make a meaningful difference in people's lives. Our medical devices, software and related services are used worldwide to diagnose and treat patients suffering from serious cardiopulmonary and respiratory conditions. The Acute Care Technology division of ZOLL Medical Corporation develops and delivers innovative lifesaving products and software solutions to EMS, hospital, public safety, and military customers globally. Products include AEDs, trauma kits, ventilators, temperature management solutions, and more. Our dedicated employees take pride in their commitment to improving patient outcomes while delivering world-class customer service. At ZOLL, you won't just have a job. You'll have a career-and a purpose. Join our team. It's a great time to be a part of ZOLL! Job Summary Verification of procured materials, sub-assemblies, finished products and processes to the companies Quality Standards. This may include visual inspection, dimensional measurement, and electrical testing to verify conformance to established standards and specifications. Essential Functions Inspect measure and/or test material to established methods and standards. Utilize various inspection tools, such as Vision System, Verniers, Micrometers, Rulers, Oscilloscopes, DVMs, Power Supplies, Defib/Pacer Analyzers, custom fixtures etc. per procedures. Document inspection and test results according to established procedures. Maintain quality documentation files such as, Device History Records (DHR) and Inspection History Records. Process returned material to established procedures. Read and interpret documentation such as Standard Operating Procedures (SOP), schematics, technical drawings, PDAs and ECOs. Interface with other functions and departments as required. Required/Preferred Education and Experience High School Diploma Or equivalent. required 1-3 years experience in a related position. required Knowledge, Skills and Abilities Good written and oral communication skills. Ability to read specifications, procedures and engineering drawings. Familiar with use of mechanical and electronic test equipment. IPC-A-61OD for Incoming Inspection, preferred. Basic computer skills: Microsoft Office, Oracle and MES. Physical Demands Ability to lift up to 50 lbs. ZOLL is a fast-growing company that operates in more than 140 countries around the world. Our employees are inspired by a commitment to make a difference in patients's lives, and our culture values innovation, self-motivation and an entrepreneurial spirit. Join us in our efforts to improve outcomes for underserved patients suffering from critical cardiopulmonary conditions and help save more lives. #LI-LV1 The hourly pay rate for this position is: $24.00 to $25.00 Factors which may affect this rate include shift, geography, skills, education, experience, and other qualifications of the successful candidate. Details of ZOLL's comprehensive benefits plans can be found at ********************* Applications will be accepted on an ongoing basis until this position is filled. For fully remote positions, compensation will comply with all applicable federal, state, and local wage laws, including minimum wage requirements, based on the employee's primary work location. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, disability, or status as a protected veteran. ADA: The employer will make reasonable accommodations in compliance with the Americans with Disabilities Act of 1990.

Job Description 1. Qualifications: a. High school diploma or GED required b. Minimum 3 years of relevant quality experience, within ISO13485/GMP manufacturing environment preferred, within extrusion is a plus c. Demonstrated efficiency and competency in core and advanced methods and gages for the inspection of tightly toleranced products d. Ability to read and interpret Engineering drawings e. Demonstrate initiative and self-motivation to create efficiencies and improve productivity within the inspection process f. Able to adapt and apply inspection knowledge to an array of product geometries and materials g. Work independently and prioritize assignments h. Will receive ongoing training to support competency and growth within the role i. Will receive opportunity and training to support growth within QC 2. Basic Position Skills: a. Organization - Able to react and maintain order and focus across shifting priorities and tasks b. Time Management - Able to balances multiple responsibilities and create efficiencies within the inspection process and achieve due dates c. Critical Thinking - Able to apply and adapt training and experience effectively to assigned tasks; ability to interact with data and identify risk d. Communication - Able to contribute across the team and coordinate with and support others to achieve departmental goals e. Mature work ethic - professional and positive attitude; provide constructive feedback and ownership to drive improvement within areas of responsibility 3. Reports to: Quality Supervisor 4. Primary job responsibility: The QC Inspector Level 2 is a mid-level position within the QC department for individuals who have demonstrated proficiency in all Level 1 competencies and responsibilities. The Level 2 Inspector utilizes core and advanced inspection methods and gages efficiently to perform inspections of extruded product across a broad range of product geometries and material to determine conformance to defined specifications. This position may include responsibility for an assigned Quality workflow and/or area of focus within an area of demonstrated expertise, efficiency and experience. 5. Essential functions of position: Perform Final Inspection for product Lot Release a. Prepare, follow, perform and document final inspections as defined on inspection paperwork for lot release b. Adapt inspection method techniques to accommodate the inspection of an array of products, including prototypes, profiles, multi-lumen and thin wall extruded tubes c. Demonstrate acceptable measurement error within inspection methods and techniques d. Assess conformance to defined specifications and requirements and identify and document non-conformance reports (NCR) e. Perform boundary inspections and actions as required to contain non-conforming product f. Complete thorough and detailed end-of-shift reporting Perform Start up and In-process inspection of manufacturing extrusion lines a. Prepare, follow and perform start-up and in-process inspections for multiple extrusion lines within a shift for an array of parts with varying degrees of difficulty relating to raw material properties, geometries, tolerances and methods b. React, adjust and communicate appropriately to challenges encountered during the extrusion process c. Identify and document non-conformances to defined specifications and requirements during the extrusion process d. Communicate inspection results and work with extrusion technician or operator to address non-conformances and at-risk product e. Identify, document, and perform boundary inspection to contain at-risk product encountered during the extrusion process Assigned Quality Workflow or Area of Focus a. Support assigned workflow or area of focus with accountability and action b. Create documented procedures and provide training as warranted c. Maintain appropriate documentation and tracking of workflow outcomes and performance as warranted d. Identify under performance and risk within the workflow and action needed to sustain and/or improve workflow outcomes and performance as warranted e. Coordinate and work with others as needed in support of assigned workflow f. Provide and maintain active communication and updates of assigned workflow to Quality Manager and/or Supervisor. Inspection Methods, Gages and Equipment a. Utilize pin gages, ring gages, calipers, rulers, vision systems, and other applicable gages as specified and within scope of training b. Utilize advanced inspection methods including automated OGP routines and advanced vision system techniques such as modeling and construction c. Recognize and respond to basic visual and dimensional quality indicators and erroneous data d. Create efficiencies within the inspection process e. Identify and report equipment and gages outside of calibration dates and exhibiting damage, wear, or malfunctions Documentation and Compliance f. Adhere to Good Documentation Practices (GDP) requirements g. Maintain accurate and complete records in all required documentation h. Follow defined processes and procedures appropriately and effectively identify gaps and/or misalignment with requirements i. Maintain product and lot traceability throughout the workflow and in all inspection documentation Safety and Housekeeping a. Follow all requirements and equipment safety procedures b. Identify and report safety hazards c. Keep work area clean and organized Communication a. Professional and courteous interactions b. Effective use of email and daily reporting to facilitate follow-up and action c. Proactive and constructive communication and support across the team to drive improvement and collaboration 6. Is the work described above checked by another individual? ? YES ? NO 7. Work Environment: a. Dynamic and fast-paced manufacturing floor, prone to interruptions b. Exposure to noise, high temperatures, moving machinery, and high-voltage equipment c. Clean room and gowning requirements Is the work described above checked by another individual? YES Consistent motor skills and other requirements of the position: Persistent: Standing: 10% Sitting: 75% Walking: 15% Consistent lifting of up to 35 lbs. - Rarely lifting of 1 lb. - Frequently Maximum carrying distance of up to 30 ft. - Occasionally Reaching - must be able to reach machines and/or materials up to 6 ft. from - Frequently Kneeling - N/A Climbing stairs - N/A Repetitive motion - right/left hand/wrist - Frequently Repetitive motion - right/left foot/ankle - N/A Continuous arm motions - Yes Must be able to avoid potentially moving which could cause injury - Yes Must be able to grasp and move object consistently and regularly - Yes Vision: intricate nature of work requires of 20/20 with or without corrective lenses - Yes Must be able to use gaging equipment and tools - Yes Must demonstrate to work productively and efficiently with others - Yes Microspec offers competitive wages and benefits, including: Sign-On Bonus Comprehensive Health Insurance Matching 401K plan annually after 1 year Entry-level 2 weeks paid vacation 64 Hours personal/sick time (unused time paid out at the end of the year) Annual discretionary bonus Salary range-$26.50-$28.00 per hour based on experience 20% Second Shift Differential

Tell us about a friend who might be interested in this job. All privacy rights will be protected. First consideration will be given to those applicants that apply within the first 14 days. MINIMUM ENTRANCE REQUIREMENTS\: Applicants must have at least (A) four years of full-time, or equivalent part-time, technical or professional experience in the field of environmental engineering. civil engineering, sanitary engineering, mechanical engineering, chemical engineering or public health engineering and (B) of which at least two years must have been in a professional capacity, or (C) any equivalent combination of the required experience and the substitutions below. Substitutions\: I. An Associate's degree with a major in civil engineering or civil engineering technology may be substituted for a maximum of one year of the required (A) experience.* II. A Bachelor's degree with a major in environmental engineering, civil engineering, civil engineering technology, sanitary engineering, mechanical engineering, chemical engineering or public health engineering may be substituted for a maximum of two years of the required (A) experience.* III. A Graduate degree with a major in environmental engineering, civil engineering, sanitary engineering, mechanical engineering, chemical engineering or public health engineering may be substituted for a maximum of three years of the required (A) experience and one year of the required (B) experience.* *Education toward such a degree will be prorated on the basis of the proportion of the requirements actually completed. NOTE\: Educational substitutions will only be permitted for a maximum of one year of the required (B) experience. Salary placement is determined by a combination of factors, including the candidate's years of directly related experience and education, and alignment with our internal compensation structure as set forth by the Human Resources Division's Hiring Guidelines. For all bargaining unit positions (non-management), compensation is subject to the salary provisions outlined in the applicable collective bargaining agreement and will apply to placement within the appropriate salary range. Comprehensive Benefits When you embark on a career with the Commonwealth, you are offered an outstanding suite of employee benefits that add to the overall value of your compensation package. We take pride in providing a work experience that supports you, your loved ones, and your future. Want the specifics? Explore our Employee Benefits and Rewards! An Equal Opportunity / Affirmative Action Employer. Females, minorities, veterans, and persons with disabilities are strongly encouraged to apply. The Commonwealth is an Equal Opportunity Employer and does not discriminate on the basis of race, religion, color, sex, gender identity or expression, sexual orientation, age, disability, national origin, veteran status, or any other basis covered by appropriate law. Research suggests that qualified women, Black, Indigenous, and Persons of Color (BIPOC) may self-select out of opportunities if they don't meet 100% of the job requirements. We encourage individuals who believe they have the skills necessary to thrive to apply for this role. Apply for a Job Apply for a Job for JAWS Users Create a Profile Create a Profile for JAWS Users System Requirements The Mammography Inspector is responsible for conducting compliance surveys of mammography facilities in accordance with the FDA's Mammography Quality Standards Act (MQSA). Additional responsibilities include performing compliance inspections and testing of diagnostic and fluoroscopic X-ray facilities; investigating incidents and allegations involving X-ray equipment and facilities; reviewing facility Shielding Design plans; and evaluating registration materials through the Environmental Health online licensing system. Duties and Responsibilities (these duties are a general summary and not all inclusive): Administers technical activities related to mammography licensing by coordinating and conducting field investigations of installations utilizing all types of radiation sources. Conducts MQSA compliance inspections of mammography facilities, including evaluating equipment performance, reviewing quality assurance records, verifying staff qualifications, and documenting findings in accordance with federal standards. Prepares and submits written reports, investigative materials, and procedural documentation to determine the causes of radiation accidents or incidents, in accordance with the State and FDA Mammography Quality Standards Act (MQSA). Performs compliance inspections and investigations in relation to Department of Public Health regulations, including conducting technical measurements and evaluations of diagnostic X-ray equipment. Travels statewide as required to conduct inspections, investigations, and fieldwork; no specific geographic territory is assigned based on the inspector's home location. Serves as a member of the Commonwealth's Nuclear Incident Advisory Team (NIAT) and performs emergency response activities during radiation-related accidents or incidents. Provides technical recommendations on mammography systems, including matters related to filtration, collimation, and target-to-image receptor distance, and evaluates their impact on controlled and uncontrolled areas with respect to radiation exposure for occupational personnel and public protection. Prepare written inspection reports assessing compliance with Department rules and regulations governing radiation hazard control for review by senior staff. Reviews Shielding Design Plans for facilities utilizing radiation sources to ensure compliance with applicable Department and NRCP regulations. Utilizes radiation survey instruments to conduct measurements and assessments in the fields. Obtains and maintains inspector certification in accordance with the FDA Mammography Quality Standards Act. Performs e-licensing duties to support the registration and licensing of ionizing radiation users and facilities. Performs additional duties as assigned by the Director of the Division of Radiation Control (DRC). Required Qualifications: • Knowledge of the terminology and standard abbreviations used in environmental/sanitary engineering. • Knowledge of the engineering properties of soils, including the compressibility and shear strength of soils. • Knowledge of the methods of soil testing, including soil classification and triaxial strength tests. • Knowledge of the methods used in the preparation of charts, graphs and tables. • Ability to analyze and determine the applicability of environmental/sanitary engineering data, to draw conclusions and make appropriate recommendations. • Ability to read and interpret documents such as plans, specifications, blueprints, drawings, etc. • Ability to understand and apply laws, rules and regulations concerning the environment in connection with the construction and maintenance of pollution control facilities and equipment. • Ability to understand, apply and explain the laws, rules, regulations, policies, procedures, specifications and guidelines governing assigned unit activities. • Capacity to operate instruments and equipment used to measure environmental conditions. • Ability to perform mathematical calculations using formulas to solve environmental/sanitary engineering problems. • Ability to prepare technical and general reports. • Capacity to maintain accurate records. • Ability to write concisely, express thoughts clearly and to develop ideas in a logical sequence. Preferred Qualifications: Experience as a Radiological Technologist Certification as an FDA mammography inspector Microsoft Office Suite Valid Massachusetts Driver's License Access to reliable transportation for work related travel Working Conditions\: General office working conditions may include transporting up to 25 lbs. In state travel up to 50% of the time and some overnight travel is required to support in state MA inspections Out of state travel to support training may be required up to 2 weeks. About the Department of Public Health: The mission of the Massachusetts Department of Public Health (DPH) is to prevent illness, injury, and premature death, to assure access to high quality public health and health care services, and to promote wellness and health equity for all people in the Commonwealth. We envision a Commonwealth in which all people enjoy optimal health. Massachusetts ranks among the healthiest of states according to comparative analyses, but we face numerous challenges, including chronic and infectious disease, substance abuse, violence, preventable hospitalizations, and health disparities. DPH coordinates programs and policies to address specific diseases and conditions and offer services to address the needs of vulnerable populations. We also develop, implement, promote, and enforce regulations and policies to assure that the conditions under which people live are most conducive to health and enable people to make healthy choices for themselves and their families. We license health professionals, healthcare facilities and a variety of businesses that impact public health. We operate the state laboratory and four public health hospitals. We monitor health status and manage vital records including births, marriages and deaths. We educate people about public health issues and work closely with local boards of health and community partners to identify and solve public health problems. Pre-Offer Process: A criminal background check will be completed on the recommended candidate as required by the regulations set forth by the Executive Office of Health and Human Services prior to the candidate being hired. For more information, please visit http\://********************* Education, licensure and certifications will be verified in accordance with the Human Resources Division's Hiring Guidelines Education and license/certification information provided by the selected candidate(s) is subject to the Massachusetts Public Records Law and may be published on the Commonwealth's website. If you require assistance with the application/interview process and would like to request an ADA accommodation, please click on the link and complete the ADA Reasonable Accommodation Online Request Form For questions, please contact Employment & Staffing at ************** Option 4.

Rennscot MFG, founded in 2017, started as a motorsports-focused shop in the aftermarket automotive industry. Now, they are a leading provider of advanced manufacturing services located in Woburn, MA. Rennscot MFG strives to be more than just a machine shop; they solve problems in innovative ways, using a suite of integrated services to fuel a passion for ideation. With a focus on diversifying into commercial and critical technology sectors, Rennscot MFG delivers cutting-edge technologies and unwavering commitment to quality. They offer a comprehensive range of services, including reverse engineering, metal & polymer additive manufacturing, and precision machining to support various industries' needs. For more information, visit rennscotmfg.com. Description The Quality Control Inspector is responsible for ensuring that manufactured components meet engineering and customer specifications through precise inspection processes. This role places a strong emphasis on visual inspections, along with manual inspection methods, and requires a keen understanding of technical drawings and GD&T. Candidates will be considered for either an L1 (entry-level) or L2 (experienced) inspector position based on experience and qualifications. Responsibilities Operate pre-programmed CMM inspections (Zeiss/Calypso preferred) Load/unload parts and verify setups Interpret CMM results and compare them against engineering requirements Document findings in the MES (ProShop) and communicate deviations Perform manual inspections using a variety of precision metrology tools Calipers, micrometers, height gauges, thread gauges, bore gauges, etc. Visual inspections for defects such as nicks, scratches, and finish inconsistencies Review technical drawings and apply GD&T principles to inspections Conduct receiving, in-process, and final inspections Assist in non-conformance investigations, root cause analysis, and corrective actions Maintain accurate inspection records and ensure compliance with AS9100/ISO9001 standards Collaborate with machinists, engineers, and quality team members to resolve inspection-related concerns Adhere to company safety protocols, including proper PPE usage (eye protection, hearing protection, etc.) Step into other support roles as needed based on company demands; assist with CNC machine operation, post-processing additively manufactured parts, mechanical assembly, or logistics tasks (e.g., driving components to/from outside processing vendors) Required Skills & Qualifications Experience in quality inspection within a manufacturing environment Strong ability to interpret technical drawings, GD&T, and work instructions Proficiency in basic metrology tools (calipers, micrometers, etc.) Familiarity with non-conformance documentation and quality reporting Attention to detail and ability to work independently in a fast-paced environment Preferred Skills & Qualifications Experience running CMM programs (Zeiss/Calypso preferred) Ability to make minor adjustments to Calypso programs Understanding of statistical process control (SPC) and quality tools (FMEA, control plans, etc.) Experience working in regulated industries (aerospace, medical, automotive, etc.) Physical Demands Standing for extended periods Lifting/moving objects up to 50 lbs Fine motor skills for handling small precision components Working in an industrial environment requiring PPE (eye protection, hearing protection, etc.) ITAR Requirement To conform to US Government export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a US citizen, lawful permanent resident of the US, protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the US Department of State. Learn more about the ITAR here: **************************************************************************************** Rennscot MFG is an Equal Opportunity Employer; employment with Rennscot MFG is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

The Quality Control Technician - Troubleshooting is responsible for inspecting and testing cable and wire products and processes to ensure they meet all quality standards, specifications, and regulations. This includes performing visual inspections, dimensional measurements, electrical, and functional tests. The primary function of this role is to evaluate nonconforming products and to determine the necessary actions to rework the product. The QC Technician must also be able to read and interpret blueprints, engineering drawings, and specifications. This position requires the use of High Voltage, all safety guidelines, procedures, and regulations to prevent accidents and ensure a safe working environment must be followed. The Quality Control Technician - Troubleshooting is a respectful team-player that works well with diverse internal team members. This position is ambitious, self-motivated, results-driven, and demonstrates problem solving skills with sound judgment. This role is also responsive, flexible, accessible, detail oriented, willing to embrace change and proactively adjust plans. Partnering with and elevating others by communicating with peers to increase awareness and ensure team success. Essential Duties and Responsibilities: Troubleshoot nonconforming cables, fill out nonconformance reports and communicates findings to Production Quality Supervisor and Quality Manager Detect and report unusual or non-conforming documentation, materials, conditions, or product to Production Quality Supervisor and Quality Manager. Assist and sometimes lead Root Cause and Corrective Action efforts. Inspect materials, components, and final product to ensure they meet quality standards. Measure dimensions of cable and wire products to ensure they meet specifications. Conduct visual and electrical tests on cable and wire products to ensure they meet performance requirements and identify any defects. When required, perform functional tests on cable and wire products to ensure they operate as designed. Document the results of all tests and inspections. Create, update, compile, save and maintain documentation into internal database. Work with various internal personnel and departments to communicate and resolve quality issues. Comply and support company policies and quality management system. Maintain and create a clean, uncluttered environment that reduces waste and optimizes productivity by following the 5S steps: sort, set in order, shine, standardize, and sustain. When required, help with continuous improvement efforts. More additional responsibilities may be applicable per the Quality Manager. Qualifications: High school diploma or equivalent. 1+ year of experience in quality control, preferably in the cable and wire manufacturing industry. Experience with visual inspection and dimensional measurement. Basic understanding of Microsoft Office and Adobe. Ability to read and interpret blueprints, engineering drawings, and specifications. Strong attention to detail. Ability to work independently and as part of a team. Strong communication skills. Proficient with computers and comfortable using Microsoft Office Suite (Word, Excel, etc.). Physical Qualifications: The physical demands described are representative of those that must be met by an employee to successfully perform the essential function of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to sit; stand; crouch; stoop; walk; talk; hear; use hands to handle or feel assemblies; reach with hands and arms for materials and tools. The employee must occasionally lift and/or move up to twenty-five (25) pounds. They must also have the ability to see details at close range (within a few feet of the observer), color vision, depth perception and ability to focus. This position requires use of information or access to hardware and documents which are subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee. Benefit Conditions: Waiting period may apply Only full-time employees are eligible This Job Is: A job for which military experienced candidates are encouraged to apply Job Type: Full-time Salary: $20.00 - $25.00 per hour Benefits: 401(k) Dental insurance Health insurance Paid time off Vision insurance Experience level: 1 year Schedule: 8 hour shift Day shift Monday to Friday Overtime Work setting: In-person Experience: Blueprint reading: 1 year (Required) Quality control: 2 years (Preferred) Work Location: In person

Job DescriptionJob Title: Quality Control Inspector Pay: $17. 50-$18. 50/hr Shift: 3rd Shift | 11:00 PM -7:00 AMLocation: Gardner, MA

So why join Hologic? You will have the opportunity to get in on the ground floor at a high growth facility to create a manufacturing process working on life-saving medical devices with potential for future growth. This is a great opportunity to enhance you manufacturing operation skills and knowledge to further your career. The Quality Control Inspector is a critical member of the Quality Assurance team, responsible for ensuring that finished products and in-process components meet all regulatory, quality, and customer requirements before release to inventory. This role involves the meticulous review of Device History Records (DHRs), performing inspections, and providing support to manufacturing and quality processes, such as Incoming Inspection, Material Review Board (MRB), Calibration and Returned Material Authorization (RMA) activities. The Final Inspector 2 is instrumental in upholding Hologic's commitment to excellence by ensuring compliance with Good Manufacturing Practices (GMP), ISO standards, and quality systems, while fostering a culture of continuous improvement and collaboration. What to expect: * Lead with Ownership - Demonstrate integrity and always aim to do the right thing. Be highly accountable for your work, follow through on commitments, and take responsibility when things don't go as planned. Embrace opportunities to try new things and learn from mistakes. * Act with Speed - Approach tasks with a strong sense of urgency and a bias toward action. Keep stakeholders informed by providing regular updates early and often, ensuring transparency and avoiding unexpected surprises, even when working at a fast pace. * Foster Partnerships - Collaborate effectively with teammates and stakeholders to achieve shared goals. Invest in building strong working relationships and contribute to efforts that fulfill the organization's Purpose, Promise, and Passion. * Delight Customers - Strive to exceed expectations by delivering high-quality work, exceptional experiences, and innovative solutions. Engage in proactive communication, provide excellent service, and develop a deep understanding of customer needs to create positive, lasting impressions and build trust-based relationships. * Celebrate WINS! - Take pride in delivering impactful results. Contribute to a positive team environment by celebrating both individual and team accomplishments. Support colleagues, recognize collective successes, and embody the mindset of an 'A-player' who inspires others. What we expect: * Perform detailed reviews of Device History Records (DHRs) as part of final inspection and release activities for finished products, ensuring accuracy and compliance with documentation standards. * Conduct reviews of manufacturing records for replacement components, subassemblies, and in-process inspections to ensure alignment with quality requirements. * Support manufacturing personnel by ensuring proper documentation of Failure Investigation Reports and processing of Non-Conforming Materials in the Product * Lifecycle Management (PLM) system, including identification, quarantine, and documentation. * Perform routine inspections, including field service and special inspections, to support validations, studies, and incoming inspection activities. * Communicate and reinforce Good Manufacturing Practices (GMP) to manufacturing personnel to uphold quality standards. * Review and provide input on new releases of Inspection and Test documents to ensure adherence to Good Documentation Practices (GDP). * Maintain QA Activity Collection Plans, First Pass Yield reports, and other applicable tracking mechanisms to monitor quality metrics. * Collaborate with Engineering to provide feedback on documentation improvements and process changes. * Support Incoming, product returns and calibration teams as needed as needed. * Perform other duties as assigned by leadership to meet organizational and operational needs. Education and Experience: High school degree and/or an equivalent technical school education preferred. Minimum of 3 to 5 years related Quality Inspection experience in Medical Manufacturing environment. Experience with Oracle, and Agile preferred. The annualized base salary range for this hourly role is $46,100-$69,000 and is bonus eligible. Final compensation packages will ultimately depend on factors including relevant experience, skillset, knowledge, geography, education, business needs and market demand. Agency and Third Party Recruiter Notice: Agencies that submit a resume to Hologic must have a current executed Hologic Agency Agreement executed by a member of the Human Resource Department. In addition Agencies may only submit candidates to positions for which they have been invited to do so by a Hologic Recruiter. All resumes must be sent to the Hologic Recruiter under these terms or they will not be considered. Hologic, Inc. is proud to be an Equal Opportunity Employer inclusive of disability and veterans.

Summary: The Lead Housing Quality Standard (HQS) Inspector is responsible for conducting any mandatory inspection for all leased units under the Rental Assistance Program in accordance to the Department of Housing and Urban Development (HUD) and Department of Housing and Community Development (DHCD) program guidance. As the Lead HQS Inspector the incumbent is expected to assist the Inspections' Supervisor in providing training to newly hired inspectors and with administrative duties as assigned. Why Work for SMOC? Paid Time Off: All full-time employees can accrue up to 3 weeks of vacation, and 2 weeks of sick time and are eligible for 12 paid holidays during their first year of employment. Employer-paid Life Insurance & AD&D and Long-Term Disability for full-time employees. Comprehensive Benefits Package including Medical Plans through Mass General Brigham with an HRA Employer cost-sharing program, Dental Plans with Orthodontic Coverage, and EyeMed Vision Insurance available to full-time employees. 403(B) Retirement Plan with a company match starting on day one for all full-time and part-time employees. Additional voluntary benefits including; Term and Whole Life Insurance, Accident Insurance, Critical Illness, Hospital indemnity, and Short-Term Disability. Flexible Spending Accounts, Dependent Care Accounts, Employee Assistance Program, Tuition Reimbursement and more. Primary Responsibilities: Conduct thorough HUD/DHCD HQS inspections of all SMOC RAPS existing units, potential new units, and the reinspection of those units as required including physical and remote virtual inspections. Verify unit compliance based on health and safety requirements. Verify unit conditions for rent reasonableness comparisons. Enter all inspection data into the MRI Tenmast Software Systems' Inspection module and monitoring information as needed; printing all required inspection-related letters for participating tenants and owners. Assist the Inspection Supervisor in providing "on the job" training for newly hired HQS inspectors in the field Assist the Inspection Supervisor in monitoring the various types of inspections conducted by the HQS Inspection team including remote virtual inspections, re-inspections, inspections conducted using an owner self certification and physical inspections Make recommendations to the Inspection Supervisor on behalf of the HQS inspectors on process and procedure Monitor HQS supplies and make requests to the Program Director on orders for necessary equipment such as gloves, shoe coverings and personal protective equipment as needed Utilize and maintain inspection-related equipment on a regular basis, including camera, hand-held inspection devices or tablets, flashlight, cell phone, tick tester, and inspection-supply cache. Engage all clients by understanding and addressing their needs whether within or outside the scope of work. Attend & participate in engagement team meetings as requested and communicate effectively with clients and staff in other areas. Maintain confidentiality of client, employee and agency information in accordance with federal and state laws and funder requirements. Ensure compliance with program/department, agency and/or funder requirements, as well as SMOC policies & procedures. Other duties as assigned. Knowledge and Skill Requirements: Education: High school diploma or equivalent Minimum years of related experience: 1-2 years preferred Knowledge of Excel, Windows, Word and PCs, ability to work well in a very high volume and productivity environment, ability to handle potentially stressful situations and sensitivity to the needs of economically- disadvantaged clientele. Valid Mass. driver's license and insurance Mobility to use office machines, sitting, standing, ability to lift archive boxes filled with files. Must meet all required DHCD program certifications within 1 year. Organizational Relationship: Directly reports to HQS Inspection Supervisor. Indirectly reports to Program Director, Assistant Director and Division Director. Direct reports of this position are none. Indirect reports of this position are HQS Inspectors. Physical Requirement: Physical effort required to do the job: Mobility to use office machines, sitting, standing, ability to lift archive boxes filled with files. Working Conditions: This job requires working in many different conditions and places. About 80% of the time is outside the office either on the road or at a tenant's unit. Therefore, conditions range from an office environment to an outdoor environment that can be dirty, wet, cold, hot, difficult and risky. As part of the responsibilities of this position, the Lead Inspector will have direct or incidental contact with clients served by SMOC in various programs funded or administered through the Executive Office of Health and Human Services. A successful background check is required. Remote Work Option: Remote work is permissible in some positions at SMOC depending on the key functions and responsibilities. The Lead Inspector position is eligible to work from home 0% of the week in scheduling coordination with the department manager. Monday-Friday; 9am-5pm 35

Summary of Primary Responsibilities: The QC Incoming Inspector completes all activities required to approve raw materials for use in product manufacture on the second shift. The position also performs inspection activities during in-process manufacturing for second shift. Specific Responsibilities: Perform quality line clears and in process inspections during the inspection and packing processes according to specific SOP requirements Issue lot numbers and control labels for incoming raw materials; perform inspections per internal procedures and specifications Release approved raw materials for use in manufacturing process to include completion of associated documents, notice of approval form (bin card) and relabeling of inventory Review MPS of other incoming inspectors for approval and release. Monitor and perform annual retain inspection; coordinate required retesting with QC; complete required documentation Perform OOS investigations and participate in MRB as required for rejected materials Perform as SME for the function and provide training as required to new employees, contractors and other QA personnel Perform biennial review for designated procedures and MPS as needed Documents; author and complete DCR as required Document all work activities according to Good Documentation Practices Maintain current training on all assigned procedures to include read & understood, skills development and classroom training activities as required Participate in other projects as assigned Job Complexity: The position works on assignments that are routine in nature and receives detailed instruction on all work. Supervisory Responsibilities: None Required Qualifications: Associates degree in the life science or relevant work experience 0 - 1 year of experience in a cGMP facility or previous experience in a QA/QC role within the industry; internship experience considered Experience using Microsoft Office or an ERP system Desired Experience, Knowledge, and Skills: Bachelor's degree preferred Experience working in a clean room environment Excellent communication and documentation skills The salary range provided is based on the Company's reasonable estimate of the base salary pay range for this position at the time of posting. Actual base pay is determined by several factors relevant to the position, including skills, competencies, experience, education, and geographic location. Anika also offers a discretionary bonus program for all full-time employees, comprehensive healthcare benefits, health savings account, 401(k) plan with up to 5% company match which includes immediate vesting, employee stock purchase plan at a 15% discount, accrued paid time off, additional long-term incentives including stock awards, and much more. At Anika, we take pride in offering robust Total Rewards, inclusive of market-leading benefits to meet our employees where they are in their career and in life. The compensation and benefits information is provided as of the date of this posting. Anika reserves the right to modify compensation and benefits at any time, subject to applicable law.

Job Description Qualifications: a. High school diploma or GED required b. 0-3 years of relevant experience preferred; prior quality experience preferred, within GMP manufacturing environment is a plus Skills d. Familiarity with the fundamental concepts of Engineering drawings, inspection and documentation e. Demonstrate initiative and self-motivation to grow and succeed within the position f. Able to work semi-independently after initial training g. Display aptitude and willingness to learn and accept coaching h. Will receive hands-on training to support competency within the role i. Will receive opportunity and training to support growth within QC 2. Basic Position Skills: a. Flexibility - Able to adapt to shifting priorities and tasks b. Time Management - Able to balance multiple responsibilities and complete them efficiently c. Aptitude - Able to apply training effectively to assigned tasks d. Attention to Detail - Able to complete all documentation thoroughly and correctly e. Communication - Able to receive and give feedback and work well with others to achieve shared goals f. Mature work ethic - punctual with demonstrated good attendance record 3. Reports to: Quality Supervisor 4. Primary job responsibility: The QC Inspector Level 1 is an entry-level position within the Quality Control department. This position is focused on developing and applying foundational knowledge and the hands-on skills and competencies necessary for the inspection of extruded components utilized in Medical Devices. The Level 1 Inspector utilizes basic and foundational methods and gages to perform inspections of extruded product to determine conformance to defined specifications, adheres to GDP documentation requirements, and contributes to the daily productivity of the QC Team. This position is performed with guidance and supervision with increasing independence with experience 5. Essential functions of position: Perform Final Inspection for product Lot Release a. Prepare, follow and perform final inspections as defined on inspection paperwork for lot release b. Perform inspections using defined methods, gages and equipment c. Apply and follow ANSI and C = 0 Sampling Plans d. Document inspection results and complete all inspection paperwork as required e. Assess conformance to defined specifications and requirements f. Identify and document non-conformances to defined specifications and requirements g. Recognize, document and escalate quality concerns and issues h. Complete end-of-shift reporting Perform Start up and In-process inspection of manufacturing extrusion lines a. Prepare, follow and perform start-up and in-process inspections as defined on inspection paperwork of high-volume extrusion lines for production parts exhibiting recurring similar and consistent product geometries and materials and inspection methods b. Perform inspections using defined methods, gages and equipment c. Document inspection results and complete all inspection paperwork as required d. Assess conformance to defined specifications and requirements e. Identify and document non-conformances to defined specifications and requirements f. Communicate inspection results to the extrusion technician or operator g. Recognize, document and escalate quality concerns and issues h. Identify, document, and communicate at-risk product to appropriate personnel Inspection Methods, Gages and Equipment a. Utilize pin gages, ring gages, calipers, rulers, vision systems, and other applicable gages as specified and within scope of training b. Recognize and respond to basic visual and dimensional quality indicators and erroneous data c. Create efficiencies within the inspection process d. Identify and report equipment and gages outside of calibration dates and exhibiting damage, wear, or malfunctions Documentation and Compliance e. Adhere to Good Documentation Practices (GDP) requirements f. Maintain accurate and complete records in all required documentation g. Follow defined processes and procedures appropriately and effectively h. Maintain product and lot traceability throughout the workflow and in all inspection documentation Safety and Housekeeping a. Follow all requirements and equipment safety procedures b. Identify and report safety hazards c. Keep work area clean and organized Communication a. Professional and courteous interactions b. Effective use of email and daily reporting Work Environment: a. Dynamic and fast-paced manufacturing floor b. Exposure to noise, high temperatures, moving machinery, and high-voltage equipment c. Clean room and gowning requirements Is the work described above checked by another individual? YES Consistent motor skills and other requirements of the position: Persistent: Standing: 10% Sitting: 75% Walking: 15% Consistent lifting of up to 35 lbs. - Rarely Minimum lifting of 1 lb. - Frequently Maximum carrying distance of up to 30 ft. - Occasionally Reaching - must be able to reach machines and/or materials up to 6 ft. from floor - Frequently Kneeling - N/A Climbing stairs - N/A Repetitive motion - right/left hand/wrist - Frequently Repetitive motion - right/left foot/ankle - N/A Continuous arm motions - Yes Must be able to avoid potentially moving object which could cause injury - Yes Must be able to grasp and move object consistently and regularly - Yes Vision: intricate nature of work requires vision of 20/20 with or without corrective lenses - Yes Must be able to use gaging equipment and tools - Yes Must demonstrate ability to work productively and efficiently with others - Yes Microspec offers competitive wages and benefits including: Sign-On Bonus Comprehensive Health Insurance Matching 401K plan annually after 1 year Entry level 2 weeks paid vacation 64 Hours personal/sick time (unused time paid out at end of year) Annual discretionary bonus Salary range-$23-$26 per hour based on experience 20% Second Shift Differential

Job Description The Quality Control Technician - Troubleshooting is responsible for inspecting and testing cable and wire products and processes to ensure they meet all quality standards, specifications, and regulations. This includes performing visual inspections, dimensional measurements, electrical, and functional tests. The primary function of this role is to evaluate nonconforming products and to determine the necessary actions to rework the product. The QC Technician must also be able to read and interpret blueprints, engineering drawings, and specifications. This position requires the use of High Voltage, all safety guidelines, procedures, and regulations to prevent accidents and ensure a safe working environment must be followed. The Quality Control Technician - Troubleshooting is a respectful team-player that works well with diverse internal team members. This position is ambitious, self-motivated, results-driven, and demonstrates problem solving skills with sound judgment. This role is also responsive, flexible, accessible, detail oriented, willing to embrace change and proactively adjust plans. Partnering with and elevating others by communicating with peers to increase awareness and ensure team success. Essential Duties and Responsibilities: Troubleshoot nonconforming cables, fill out nonconformance reports and communicates findings to Production Quality Supervisor and Quality Manager Detect and report unusual or non-conforming documentation, materials, conditions, or product to Production Quality Supervisor and Quality Manager. Assist and sometimes lead Root Cause and Corrective Action efforts. Inspect materials, components, and final product to ensure they meet quality standards. Measure dimensions of cable and wire products to ensure they meet specifications. Conduct visual and electrical tests on cable and wire products to ensure they meet performance requirements and identify any defects. When required, perform functional tests on cable and wire products to ensure they operate as designed. Document the results of all tests and inspections. Create, update, compile, save and maintain documentation into internal database. Work with various internal personnel and departments to communicate and resolve quality issues. Comply and support company policies and quality management system. Maintain and create a clean, uncluttered environment that reduces waste and optimizes productivity by following the 5S steps: sort, set in order, shine, standardize, and sustain. When required, help with continuous improvement efforts. More additional responsibilities may be applicable per the Quality Manager. Qualifications: High school diploma or equivalent. 1+ year of experience in quality control, preferably in the cable and wire manufacturing industry. Experience with visual inspection and dimensional measurement. Basic understanding of Microsoft Office and Adobe. Ability to read and interpret blueprints, engineering drawings, and specifications. Strong attention to detail. Ability to work independently and as part of a team. Strong communication skills. Proficient with computers and comfortable using Microsoft Office Suite (Word, Excel, etc.). Physical Qualifications: The physical demands described are representative of those that must be met by an employee to successfully perform the essential function of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to sit; stand; crouch; stoop; walk; talk; hear; use hands to handle or feel assemblies; reach with hands and arms for materials and tools. The employee must occasionally lift and/or move up to twenty-five (25) pounds. They must also have the ability to see details at close range (within a few feet of the observer), color vision, depth perception and ability to focus. This position requires use of information or access to hardware and documents which are subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee. Benefit Conditions: Waiting period may apply Only full-time employees are eligible This Job Is: A job for which military experienced candidates are encouraged to apply Job Type: Full-time Salary: $20.00 - $25.00 per hour Benefits: 401(k) Dental insurance Health insurance Paid time off Vision insurance Experience level: 1 year Schedule: 8 hour shift Day shift Monday to Friday Overtime Work setting: In-person Experience: Blueprint reading: 1 year (Required) Quality control: 2 years (Preferred) Work Location: In person