Inspector jobs in Norman, OK - 51 jobs

A national leader in Fire, Suppression and Life Safety continues to grow, and has an opening for a talented Senior Sprinkler Inspector. This is an team focused position. This organization provides elite installation, service and consulting of Commercial fire protection. While at the cutting-edge of modern technology, this company takes culture seriously, and provides a forever home for the right individual! This individual would need a strong knowledge of the fire protection industry. NICET's as well as greater fire industry is a strong plus. Ability to adapt and learn. Product knowledge is also a strong plus. Full packages include hourly rate, full benefits, bonuses, gas reimbursement, and more. Company vehicle Reach out to learn more about this role or others in the fire protection/integration world! ************************* ************

GIS Field Services, Inc. has been in the mortgage field inspection industry for over 20 years and is based out of Dallas, TX. We are looking to hire Mortgage Occupancy Field Inspectors to perform residential property inspections on behalf of mortgage lenders. Our independent contractors enjoy a flexible schedule while earning weekly pay. Please visit our website to learn more about us and the industry. ************************ Job Title: Mortgage Occupancy Field Inspector County Coverage: Cleveland, Caddo, Canadian, Grady, Kingfisher, Lincoln, Logan, McClain, Oklahoma, Pottawatomie, Seminole Mortgage Property Inspection Overview: Mortgage lenders require periodic updates on the properties they have financial interest in. The lender contracts with GIS to have inspectors go out to verify the property occupancy, report general property conditions, letter delivery/posting, vacant interior walk-through or insurance repair progress report. Majority of our inspections are basic exteriors where some do require contact by door knock or letter delivery. In addition, there will be some inspections which require interior access to secured/vacant properties and appointment-based insurance loss inspections. Job Responsibilities: Requires being able to spend extended periods of time driving Efficient time management to route and complete inspections with an estimated 3-5 day turnaround time (this can vary) in your agreed territory Make a determination of occupancy based on industry standards and report general property conditions Using a mobile app, InspectorADE, to obtain all photographs, comments, and form documentation Consistent communication with your inspection manager via text, email and phone Requirements: Experience preferred, not required Complete a background check using a valid driver's license to obtain a Shield ID (Aspen Grove ABC#) - If onboarded with GIS, we will provide you the link to obtain your Shield ID Computer and internet connection Vehicle with good gas mileage iPhone or Android Printer Volt Stick Set of 11 Hud Keys (Inspector Keys) - If onboarded with GIS, we will provide a link with a discount code to obtain your Hud Keys Daylight availability Office supplies (paper, envelopes, ink) Pay: Set rate per inspection ($15-$20 per hour based on location and the number of inspections performed) Payment - inspections are paid out every Friday for work completed and approved the prior week by direct deposit This is a 1099 Independent Contractor position

SCOPE: Responsible for assisting in the performance of technical functions necessary in the development and administration of new construction and modernization programs. ACCOUNTABILITY: Directly responsible to the Assistant Director of Technical Services. EXAMPLES OF WORK PERFORMED: Advises on the technical aspects relating to the development and modernization of public housing within current laws and established policies. Develops project specifications, evaluates Contractor submittals, reviews and initiates change orders, and reviews plans and specifications. Inspects in-progress and completed individual Contractor work. Monitors various testing and test results and prepares reports in accordance with established policies and laws under the guidance of the Director of Technical Services. Develops Energy Conservation Program requirements, including evaluation of needs, current conditions, and scheduling. Performs other duties as assigned. Qualifications : College graduate with major emphasis in construction/modernization, or two years of related work experience, or an equivalent combination of education and work experience. Knowledge and skills in commercial and/or residential construction, plumbing, electrical, mechanical, roofing and concrete work. Experience in reading and interpreting construction plans and specifications. Skill in conveying technical information verbally and in writing. Perform efficiently and effectively with little or no supervision. Communicate effectively and courteously with people and retain proprietary information as confidential. Ability to comply with Authority attendance policies. Possess a valid Oklahoma Driver's License with a satisfactory driving record. PHYSICAL: Ability to climb steps/stairs/ladders. Able to enter and access all areas of all buildings and dwelling units for which responsible. Near vision sufficient to perform inspections, prepare reports, read specifications, read computer products, etc. Hearing sufficient to effectively communicate by telephone and in person with office staff, contractors, etc. All physical requirements are evaluated based on the ability to perform, with or without reasonable accommodation under the ADA. This position is not eligible to telework.

EDUCATION & EXPERIENCE QUALIFICATIONS Experience in NDT and drill pipe inspection. MPI Insp, LPT Inspection preferred. Ability to lead a crew during an inspection job.

Job Description AERONES, a Global Leader in advanced Wind Turbine maintenance and robotics, is seeking highly motivated Drone Pilots (UAS Pilots) for our Robotics services to join our U.S. Operations Team. We specialize in cutting-edge robotic solutions that ensure safety, efficiency, and top-tier service for the Wind Energy Industry. This is a hybrid role combining professional Drone Inspection with hands-on Wind Turbine Field Technician responsibilities. The role requires both Drone Operations for inspection missions and on-site field work as part of Wind Turbine Operations, including physical work at height and in industrial environments. In this role, you'll have the opportunity to travel to Wind Farms across the Country (both Onshore and Offshore), with all Accommodation and Travel Expenses fully covered by the Company. You will be performing inspections, maintenance, repairs, and upgrades on Wind Turbines - ensuring peak performance and safety standards are met. Paid Drone Training will be conducted by Aerones on piloting, process, safety, and technical skills for all new hires. GWO Basic Safety Training (BST) and GWO Advanced Rescue Training (ART) Full certifications will be required to undertake the role in the same disciplines as Wind Field Technicians. This training and appropriate supplies will be paid for by the Company for new hires. Job Tasks and Responsibilities: This is a mid-level career role requiring previous professional Drone Pilot experience - individuals will be PIC for photographic and video missions within Customer wind farms. Data Custody, Data Management, and Data Upload to Company servers. In a timely manner, communication with our Clients and internal stakeholders; Project Managers, Engineers, etc.. Report successfully completed task, analyze applicable data and as required inform relevant departments of safety and quality risks. Maintenance and operation of robotic systems used for cleaning, inspection, and repair of wind turbines. Performing routine inspections on turbines to ensure optimal performance and compliance with safety standards. Preventative maintenance on wind turbines and associated systems to reduce downtime and maximize energy production. Fault diagnosis and resolution of technical issues using advanced diagnostic tools and technology. Reporting and documentation of work completed, including identifying issues, repairs, and maintenance performed. Ensuring adherence to Safety Protocols and Industry Standards. What We Offer: Stable, long term employment with career growth in a rapidly expanding, innovative Company Competitive hourly rate: $27.00 - $32.00 per hour (based on experience) Fully paid Travel and Lodging for Projects nationwide, with an additional $60 a day per diem for other Meal & Incidentals Work with a Global Team pioneering the future of wind turbine technology What We're Looking For: Strong mechanical and electrical troubleshooting skills Proven ability to learn new skills Ability to Travel Frequently and work in Field conditions Requirements The minimum requirements to be considered for this role include: Applicants must be legally authorized to work in the United States. We are unable to sponsor Visas at this time. A Valid Drivers License and a clean driving record FAA Part 107 Remote Pilot Certificate Basic Computer skills Willing and able to undertake a Background check and a Physical Check (Medical) to ensure ability to undertake the responsibilities of the role (working in confined spaces, climbing, lifting etc). Highly Desired FAA Private Pilot Certificate DJI Mavic 3 or similar quadcopter experience Prior military service GWO Basic Safety Training (BST) GWO Advanced Rescue Training (ART) Full GWO Basic Technical Training (BTT) OSHA 10 Certificate NFPA 70E GE / Vestas / Siemens Gamesa / Nordex Turbine Operations / LOTO GWO Sea Survival Benefits We believe great work starts with feeling valued and supported. That's why we are building an thoughtful, competitive benefits and perks to help you thrive - professionally and personally - through every step of your Career with us. You will be eligible for: Health Insurance Medical (80% Employer contribution) Dental Vision Term Life Paid Time Off (PTO) - 10 days Aerones is an Equal Opportunity Employer. We are committed to creating a diverse and inclusive workplace and consider all qualified applicants for employment without regard to Race, Color, Religion, Sex, Sexual Orientation, Gender Identity or Expression, National origin, Age, Disability, Veteran Status, or any other legally protected status. Employment decisions are based on qualifications, merit, and business needs. AERONES - Build the Future!

Founded in 1944, Lochner is a trusted infrastructure services provider for aviation, surface transportation and water clients who need high-quality, forward-looking solutions to complex challenges. Our vision is to become a Top 100 leader in the A/E industry, centered on an agile, engaged, and empowered workforce coming together to embrace the art of the possible and make a lasting difference in our world. Are you ready to join us on this journey? As a people-centric company, Lochner's purpose is to empower our team to put their knowledge to work, enhancing communities across the US. To achieve this, we hire candidates of all experiences and skillsets because amazing things happen when people with diverse backgrounds come together to solve problems. We believe collaboration is more than a buzz word - it is a guiding principle in which every point of view is valued and heard and is the driving force in delivering our best work. At all levels of the organization, we foster an entrepreneurial spirit and culture of autonomy to advance our strategic vision and continually seek our next success story. Lochner - learn more about us Your Impact: Observes and monitors field work activities on a project to ensure conformance to plans, specifications, and other contract documents Checks lines, grades, dimensions, and elevations using standard field measuring equipment Observes highway work zones and traffic control setups and reports potential issues to supervisor. Tests and/or samples materials Experience in documenting daily activities and pay items in AWP, Excel, or other software Works under the direct supervision of a Field Project Engineer, Senior Inspector or Resident Engineer Additional responsibilities as needed including working at night. Who are you: High School graduate with some state-required certification courses 8+ years' experience with ODOT Projects in inspection of roadway / bridge construction. This position will support our OKC & Tulsa market. Ability to perform basic mathematical calculations, calculating areas, volume, etc. Ability to read road and bridge construction plans Certifications: Level 1B Hot Mix, ACI concrete field testing Basic computer skills Experience in documenting daily activities and pay items in Site Manager Must possess a valid driver's license Qualifications Joining Lochner means gaining access to a comprehensive suite of benefits designed to support your health and financial well-being throughout your career. Lochner provides an extensive total rewards package that includes: Competitive Premiums for Medical, Dental, and Vision Paid Time Off and Flexible Holiday Program Company Paid Disability (includes paid Maternity Leave), and Life Insurance Health Savings Accounts (HSA) with Employer Contribution Flexible Spending Accounts (FSA) for Medical Expenses and/or Dependent Care Paid Family Leave Retirement Plan with Employer Match Flexible Work Schedules (Hybrid or Remote, when possible) Wellness Program for Physical and Mental Health Lochner Cares Non-Profit 501c3 Education and Training Assistance Employee Assistance Program Employee Discounts Paid Time Off for Charitable Acts of Service What we offer - Learn more Work Environment The work environment characteristics described are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts and outside weather conditions. The noise level in the work environment is usually loud. Physical Requirements The physical requirements must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Intermittent sitting, walking, standing, bending, squatting, climbing, kneeling, twisting, stoop, crawl, and lifting. The employee must frequently lift and/or move light equipment up to 20 pounds. Must be alert to equipment in the field, occasional need to work near hazardous equipment and machinery, occasional need to walk on uneven ground, exposure to dust, gas or fumes, exposure to noise, extremes in temperature or humidity, and potential work at heights. Equal Employer Lochner is proudly committed to recruiting and retaining a diverse and inclusive workforce. Lochner provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. All positions at Lochner require an applicant who has accepted an employment offer to undergo pre-employment screening. Background checks include SSN/SIN validation, motor vehicle verification, education verification, employment verification, a criminal check, search against global sanctions and government watch lists, and drug tests. All employment offers are contingent upon successful results of the pre-employment screening. California Privacy Policy #LI-WJ1

Job Posting Title Agriculture Field Inspector Agency 040 DEPT OF AGRICULTURE FOOD & FORESTRY Supervisory Organization Agriculture, Food & Forestry-Agriculture Building Job Posting End Date Refer to the date listed at the top of this posting, if available. Continuous if date is blank. Note: Applications will be accepted until 11:59 PM on the day prior to the posting end date above. Estimated Appointment End Date (Continuous if Blank) Full/Part-Time Full time Job Type Regular Compensation up to $27.89 hourly Job Description The Oklahoma Department of Agriculture, Food and Forestry (ODAFF) is seeking a full time AG Field Inspector, Compliance Officer in the Food Safety Division. This position (PIN #04000252) is in state government, this position will work throughout the state of Oklahoma. The State of Oklahoma offers a comprehensive Benefits Package, including a generous benefit allowance to offset the cost of insurance premiums for employees and their eligible dependents. The hourly pay for this position is up to $27.89 based on education and experience. Position Description: This position will be responsible for investigating the manufacturing and selling of meat and poultry products without proper inspection and verifying proper handling of meat and poultry products involved in wrecks throughout the state of Oklahoma. Duty station to be determined upon hire. Typical Functions: * Responsible for performing multiple inspections and obtaining numerous samples, many of which are tied to our USDA FSIS Cooperative Agreement. * Investigates complaints of violations of the Oklahoma Meat and Poultry Inspection law and regulations. * Clearly communicate Agency policies and regulatory requirements to compliance investigation personnel, other regulatory authorities, and customers. * Efficiently and effectively, obtain and prepare evidence, information, records, and other data of alleged violations. * Prepare written investigations and accurate, detailed and descriptive reports. * Collect, prepare, and submit meat and poultry samples for laboratory analysis. * Coordinate and provide technical assistance to agencies in investigations concerning public health matters. * Schedule compliance investigations, work assignments, and travel to best utilize time and resources. Level Description: This is the specialist level of this job family where employees are assigned independent responsibilities for performing advanced level work in the management of a single or multi-program agricultural, environmental, animal health, or consumer protection area. Employees at this level will have a clear specialization in an agricultural related discipline and may be recognized as an expert in the assigned specialty. The work is generally performed with a high degree of technical and administrative freedom to plan, develop, organize, and conduct all phases of the work necessary for completion within broad program guidelines. Education and Experience: Requirements at this level consist of a bachelor's degree in an agricultural, biological, plant, animal, physical or natural science, food technology, or a closely related field plus two years of qualifying inspection experience or administrative or managerial experience in an agricultural related field; or an equivalent combination of education and experience. Two years of qualifying inspection experience or administrative or managerial experience in an agricultural related field. Knowledge, Skill, and Abilities: Requirements at this level include knowledge of procedures for inspecting, evaluating and grading various agricultural commodities; of state and USDA regulations governing the standards and transport of applicable agricultural products; of federal and state laws regarding packaging and other standards related to agricultural products; of environmental and sanitation standards; of materials and equipment used in the applicable agricultural industry; of record keeping; of basic mathematics including percentages; of English usage; of methods and procedures of processing operations; of the characteristics of applicable agricultural products; of the principles and practices of public administration; of state laws related to the applicable specialty area; of investigative techniques and procedures used to gather and evaluate evidence; and of procedures for the inventory, accounting, and storage of agricultural products. Ability is required to conduct inspections related to agricultural products, services, and facilities to determine compliance with established standards, laws and regulations; to follow complex oral and written instructions; to communicate effectively, both orally and in writing; to establish and maintain effective working relationships with others; to attend to several matters simultaneously; to operate and maintain monitoring and detection equipment; to apply research methodologies; to read and interpret plans and specifications of proposed facilities; to perform a full range of inspections and investigations within the assigned area of specialization; to prepare written reports appropriate for admission to court; to conduct several investigations simultaneously; and to train and direct the work of others. Physical Demands and Work Environment: This position requires daily travel with some weekend work and is subject to on-call, stand-by, travel, and overnight stays. Outdoor working conditions will include all types of weather while working truck wrecks and investigations. Additional Information: The employee must be willing and able to travel as needed. Must have a valid driver's license. This position is subject to a twelve-month probationary period. The Department of Agriculture, Food and Forestry has determined that some positions in this job family are safety sensitive as defined by 63 O.S. § 427.8. Reasonable accommodation to individuals with disabilities may be provided upon request. Equal Opportunity Employment The State of Oklahoma is an equal opportunity employer and does not discriminate on the basis of genetic information, race, religion, color, sex, age, national origin, or disability. Current active State of Oklahoma employees must apply for open positions internally through the Workday Jobs Hub. If you are needing any extra assistance or have any questions relating to a job you have applied for, please click the link below and find the agency for which you applied for additional information: Agency Contact

Job Posting Title Agriculture Field Inspector Agency 040 DEPT OF AGRICULTURE FOOD & FORESTRY Supervisory Organization Agriculture, Food & Forestry-Agriculture Building Job Posting End Date Refer to the date listed at the top of this posting, if available. Continuous if date is blank. Note: Applications will be accepted until 11:59 PM on the day prior to the posting end date above. Estimated Appointment End Date (Continuous if Blank) Full/Part-Time Full time Job Type Regular Compensation up to $27.89 hourly Job Description The Oklahoma Department of Agriculture, Food and Forestry (ODAFF) is seeking a full time AG Field Inspector, Compliance Officer in the Food Safety Division. This position (PIN #04000252) is in state government, this position will work throughout the state of Oklahoma. The State of Oklahoma offers a comprehensive Benefits Package, including a generous benefit allowance to offset the cost of insurance premiums for employees and their eligible dependents. The hourly pay for this position is up to $27.89 based on education and experience. Position Description: This position will be responsible for investigating the manufacturing and selling of meat and poultry products without proper inspection and verifying proper handling of meat and poultry products involved in wrecks throughout the state of Oklahoma. Duty station to be determined upon hire. Typical Functions: Responsible for performing multiple inspections and obtaining numerous samples, many of which are tied to our USDA FSIS Cooperative Agreement. Investigates complaints of violations of the Oklahoma Meat and Poultry Inspection law and regulations. Clearly communicate Agency policies and regulatory requirements to compliance investigation personnel, other regulatory authorities, and customers. Efficiently and effectively, obtain and prepare evidence, information, records, and other data of alleged violations. Prepare written investigations and accurate, detailed and descriptive reports. Collect, prepare, and submit meat and poultry samples for laboratory analysis. Coordinate and provide technical assistance to agencies in investigations concerning public health matters. Schedule compliance investigations, work assignments, and travel to best utilize time and resources. Level Description: This is the specialist level of this job family where employees are assigned independent responsibilities for performing advanced level work in the management of a single or multi-program agricultural, environmental, animal health, or consumer protection area. Employees at this level will have a clear specialization in an agricultural related discipline and may be recognized as an expert in the assigned specialty. The work is generally performed with a high degree of technical and administrative freedom to plan, develop, organize, and conduct all phases of the work necessary for completion within broad program guidelines. Education and Experience: Requirements at this level consist of a bachelor's degree in an agricultural, biological, plant, animal, physical or natural science, food technology, or a closely related field plus two years of qualifying inspection experience or administrative or managerial experience in an agricultural related field; or an equivalent combination of education and experience. Two years of qualifying inspection experience or administrative or managerial experience in an agricultural related field. Knowledge, Skill, and Abilities: Requirements at this level include knowledge of procedures for inspecting, evaluating and grading various agricultural commodities; of state and USDA regulations governing the standards and transport of applicable agricultural products; of federal and state laws regarding packaging and other standards related to agricultural products; of environmental and sanitation standards; of materials and equipment used in the applicable agricultural industry; of record keeping; of basic mathematics including percentages; of English usage; of methods and procedures of processing operations; of the characteristics of applicable agricultural products; of the principles and practices of public administration; of state laws related to the applicable specialty area; of investigative techniques and procedures used to gather and evaluate evidence; and of procedures for the inventory, accounting, and storage of agricultural products. Ability is required to conduct inspections related to agricultural products, services, and facilities to determine compliance with established standards, laws and regulations; to follow complex oral and written instructions; to communicate effectively, both orally and in writing; to establish and maintain effective working relationships with others; to attend to several matters simultaneously; to operate and maintain monitoring and detection equipment; to apply research methodologies; to read and interpret plans and specifications of proposed facilities; to perform a full range of inspections and investigations within the assigned area of specialization; to prepare written reports appropriate for admission to court; to conduct several investigations simultaneously; and to train and direct the work of others. Physical Demands and Work Environment: This position requires daily travel with some weekend work and is subject to on-call, stand-by, travel, and overnight stays. Outdoor working conditions will include all types of weather while working truck wrecks and investigations. Additional Information: The employee must be willing and able to travel as needed. Must have a valid driver's license. This position is subject to a twelve-month probationary period. The Department of Agriculture, Food and Forestry has determined that some positions in this job family are safety sensitive as defined by 63 O.S. § 427.8. Reasonable accommodation to individuals with disabilities may be provided upon request. Equal Opportunity Employment The State of Oklahoma is an equal opportunity employer and does not discriminate on the basis of genetic information, race, religion, color, sex, age, national origin, or disability. Current active State of Oklahoma employees must apply for open positions internally through the Workday Jobs Hub. If you are needing any extra assistance or have any questions relating to a job you have applied for, please click the link below and find the agency for which you applied for additional information: Agency Contact

PRIMARY RESPONSIBILITIES Complies with all Company, Regulatory, HS&E, Quality, and IT standards and policies. Wears all required Personal Protective Equipment (PPE) and maintains required HS&E and SQ certifications. Completes an annual visual acuity and color contrast vision examination. Uses corrective lenses if required by test results. Assists experienced inspectors in performing inspections per industry standards such as API, DS-1, and the DRILCO Field Inspection Services Procedures Manual. Observes and learns to execute inspection procedures, including setting up and calibrating equipment, performing inspections, and interpreting results. Maintains cleanliness and organization of inspection work areas and equipment, ensuring readiness for audit and future use. Supports the team in performing Risk Analysis (e.g., HARC, JSA) before jobs or tasks, identifying and reporting potential safety hazards to supervisor. Learns to manage consumable inventory and maintain calibration status of inspection tools and equipment. Observes and assists with communicating inspection results to supervisors and customers in accordance with procedures. Completes assigned pre- and post-job documentation and learns proper job ticket procedures as per company policy. Participates in continuous improvement initiatives and on-the-job training to build technical knowledge and inspection skills. Demonstrates a willingness to learn and actively seeks feedback from mentors and supervisors to improve performance. Handles other duties as assigned by Supervisor. MINIMUM REQUIREMENTS High School Diploma or GED equivalent. Willingness to work long hours and be on call 24 hours/day, as required. Basic knowledge of hand and power tools (e.g., grinders) preferred. Must be able to stand for extended periods and work in various weather conditions. Positive attitude and strong work ethic. Willingness to learn, follow instructions, and take initiative. Basic computer skills (MS Word, Outlook, Excel, PowerPoint) preferred. Ability to take direction, manage priorities, and adapt to a fast-paced environment.

Country: United States of America Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract. Security Clearance Type: None/Not Required Security Clearance Status: Not Required Pratt & Whitney is working to once again transform the future of flight-designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we're seeking the people to drive it. So, calling all curious. Come ready to explore and you'll find a place where your talent takes flight-beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we'll welcome you into a tight-knit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that's evolving fast to the future. At Pratt & Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond? What You Will Do: Perform a wide variety of inspection duties monitoring the vendor repair of engine/module subassemblies and components. Verify that repair work performed is done in conformance with technical manuals, operation sheets, and engineering requirements and does not endanger the safety of engine hardware. Review technical manual data and service repair operation sheets to verify proper and complete adherence to the defined process for the repair of sub-assemblies and components. Confirm forms, tags, and vendor certifications conformances with established process. Take measurements as required, during the inspection process. Perform visual inspection of tooling, gages and measuring instruments to ensure they are in good working condition and that any required calibration or inspection requirements are met to verify compliance with quality procedures. Perform visual and dimensional inspections of incoming and outgoing parts to determine serviceability or reparability in accordance with approved technical data. Perform any other duties assigned by Quality Supervision. Performs process audits to ensure Quality System compliance. Periodically, assist in orientating, evaluating and inspecting the work of other employees. Reviews and archives all production and quality control paperwork, inspection reports and certificates. Enters various quality control data into the computer database. Qualifications You Must Have: HS Diploma or an AA/AS degree (or other 2-year post high school training) with a minimum of 2 years relevant experience in aviation inspection, mechanic, and/or quality inspection. Qualifications We Prefer: Broad knowledge and experience with jet engine construction and hardware. Good understanding of jet engine operating principles and inspection processes/methods. Knowledge of precision measuring equipment and techniques. Know the function of engine sections and parts, with an understanding of their relationship to other engine sections and parts. Quality support experience in an Aerospace environment, including quality systems and procedures, ISO, audits, calibration techniques and SPC F100, F119 and F135 Engine Family Experience. Proven skills with Microsoft Office. Lean logistics background preferred, along with SAP MRO experience. Learn More and Apply Now! In addition to transforming the future of flight, we are also transforming how and where we work. We've introduced role types to help you understand how you will operate in our blended work environment. This role is: Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance workers, as they are essential to the development of our engines. For onsite roles, commuting to and from the assigned site is the employee's personal responsibility. As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 41,400 USD - 72,600 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

DUTIES AND RESPONSIBILITIES Assists in performing onsite visual bridge inspections according to National Bridge Inspection Standards (NBIS) or Specifications for the National Bridge Inventory (SNBI) State Bridge Inspection and associated Quality Control - Quality Assurance (QC/QA) requirements, FHWA inspection schedule, and Oklahoma Department of Transportation (ODOT) procedures. Assists with inspection report completion, including field observations, photographs, and measurements. Assists with preparation of bridge inspection submittal for appropriate county or municipality and ODOT, including reports, CDs, and maps. Attends and participates in annual ODOT and internal QC/QA training. Collaborates with team to coordinate workflow, file management, inspections, data entry and submittal schedules. Participates in proactive team efforts to achieve departmental and company goals. Complies with all safety policies, practices, and procedures. Performs other duties as assigned. COMPETENCIES Communication proficiency Technical capacity Accuracy and attention to detail Thoroughness MINIMUM REQUIREMENTS High school diploma or general education diploma (GED). One to three years' related experience and/or training preferred. English language skills: ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals; ability to write routine reports and correspondence; ability to speak effectively to CEC team members and clients. Mathematical skills: ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals; ability to compute rate, ratio, and percent and to draw and interpret graphs. Reasoning skills: ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form; ability to deal with problems involving several concrete variables in standardized situations. Proficient personal computer skills, including electronic mail, routine database activity, word processing, spreadsheet, graphics, etc. ODOT BrM familiarity preferred. Organizational skills: ability to prioritize and organize tasks; ability to handle multiple tasks simultaneously; ability to handle multiple projects simultaneously. Remote connectivity device (e.g., smart phone, tablet, etc.) with data plan sufficient for company requirements, including multi-factor authentication, time and mileage tracking, expense reimbursement, e-mail, and virtual communications. PHYSICAL REQUIREMENTS Ability to stand and walk for extended periods of time, frequently over uneven surfaces. Ability to traverse uneven terrain, climb over or crawl under obstacles. Ability to occasionally sit in vehicle more than four hours. Manual dexterity sufficient to reach/handle items and using hands to finger, handle or feel. Ability to sit and manipulate computer mouse up to eight hours per day. Ability to see clearly 20 inches or less and 20 feet or more; ability to identify and distinguish colors; ability to judge distances and form spatial relationships. Ability to lift and move up to 10 pounds frequently and up to 25 pounds occasionally. WORK ENVIRONMENT Work is primarily outdoors, including performing strenuous physical activity and exposure to changing weather conditions (rain, sun, snow, wind, etc.). Office work is in well-lighted, heated and/or air-conditioned indoor office/production setting with adequate ventilation and moderate noise. Requires use of protective and/or safety equipment. WORK SCHEDULE Fixed schedule of 40 hours per week, Monday through Friday. Flexible schedule may be required while traveling or during summer months. Occasional extended workdays up to 12 hours. Occasional overnight travel required. This position includes safety-sensitive job functions, and random screenings will be conducted in accordance with CEC's Drug and Alcohol Testing Policy. CEC is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, or other legally protected status.

Implements the Quality Management System to ensure production of products consistent with established standards. ESSENTIAL JOB FUNCTIONS: *Verify Orders *Measure Parts *Hydrostatic Testing Inspections *Stamp Valves *Maintain log books *Inspect Valves *Conduct Audits *Maintain all tools and equipment, keeping them in working order. *House keeping within area *Maintain paperwork *Process Return Authorization items accordingly Qualifications SKILLS REQUIRED: *Must be able to read various measuring devices such as calipers, micrometers, dial indicators, and others. *Must be able to read drawings and blueprints. *Ability to communicate with other departments within the company. *Dependability. *Proficient with computers.

Description Take advantage of an entry-level, day shift career where you can earn a competitive wage in the growing industry of Construction! No experience is necessary for this rare opportunity to get paid to travel locally on the company dime as you become an expert inspecting the dream homes of local families. Enjoy 100% company-paid individual healthcare with a national award-winning company that provides you with incredible support to help you grow in your career. Arcxis, the largest provider of Home Energy Rating System (HERS) inspections, is searching for an entry-level Inspector to join their team. If you are a self-motivated, driven individual with reliable transportation and enjoy being out on the road and out of the office, Arcxis wants to hear from you! Must be currently authorized to work for any US employer. As a member of the Arcxis team, you can expect: Competitive Pay with an opportunity for pay increases for obtaining position required certifications. Unbeatable benefits - Health insurance with a base plan covered at 100% by employer, dental, vision, 401(k) Plan with match, company paid life insurance, PTO, education reimbursement, referral program, Fuel card for business related travel and auto allowance. More details on benefits at ****************************** . Skills Growth and Advancement: You will go through training produced by Arcxis and obtain certifications that are paid for by Arcxis! Once trained and certifications obtained, field inspectors can advance to various management roles throughout other departments. Licensure Support - Arcxis supports you in attaining the specific regional licensure you need. Award-winning organization - Winner of Best and Brightest Companies in 2022! Requirements Essential Functions of the Job: Conduct energy testing on new homes, including blower door tests, duct leakage tests, and other diagnostic tests to measure energy efficiency and identify areas for improvement. Perform site inspections to ensure that construction meets building codes and energy efficiency standards. Work closely with builders, contractors, and other stakeholders to communicate findings and provide recommendations for improving energy efficiency. Maintain accurate records of all testing and inspection activities. Keep up-to-date with industry trends and regulatory changes related to energy efficiency and sustainability. Qualifications: High school diploma or equivalent Construction and relatable experience a plus! Reliable transportation is required to accommodate testing equipment and a ladder. This role may involve driving over 80-120 miles per day. Candidates must have and maintain the following: a valid driver's license, a clean driving record, and state-minimum auto insurance. To support your travel needs, the company provides an auto allowance to help cover maintenance costs and a fuel card for company-related travel. Candidate must be able to conduct multiple inspections each day, Must be able to pass a background check and have a clean motor vehicle report About the Company: ARCXIS, headquartered in Houston, Texas, is the leading provider of inspection, design, engineering, energy efficiency, and quality assurance services for the U.S. residential construction industry. With a nationwide presence, ARCXIS serves builders across the continental United States, delivering innovative solutions that enhance efficiency, performance, and compliance in new home construction. Our national team brings together years of expertise, offering a comprehensive suite of services that support builders in constructing high-quality, high-performance, energy-efficient homes. Through cutting-edge technology, industry knowledge, and a commitment to excellence, ARCXIS continues to set the standard for residential construction services. To learn more, visit **************

Looking to Supplement Your Income or Just Be Productive? Become an Independent Residential Insurance Inspector with CIS Group! Are you looking for a flexible, rewarding opportunity that allows you to be your own boss and take control of your schedule? CIS Group is seeking motivated, detail-oriented individuals to join our team as 1099 Property Insurance Inspectors. If you own an LLC and are looking to diversify your work, this might be the perfect opportunity for you! Why Work With Us? Since 1996, CIS Group has been one of the largest and most trusted names in the insurance inspection industry. We offer a platform that allows Independent Contractors to create and grow their own businesses, work flexible hours, and take on a variety of inspections. Whether you're supplementing your current work or looking for a new venture, this position offers flexibility and autonomy. What You'll Do: Travel to residential homes to complete exterior (interior photos here and there) property inspections. Take photos, collect property data, and upload your findings using your smartphone or tablet. Provide high-quality, professional service that delivers accuracy and on-time service, with exceptional communication. Maximize this opportunity by utilizing your unique skillset What We're Looking For: 1099 Independent Contractors - Be your own boss, set your own schedule! Flexible Hours - Work during daylight hours, Monday through Saturday. Comfortable Working Outdoors - This role requires you to work in various weather conditions. Tech-Savvy - A recent smartphone or tablet capable of taking and storing hundreds of photos. Computer Access - Wi-Fi-enabled for uploading data. Reliable Vehicle & Driver's License - Travel to residential properties within your area. Strong Communication Skills - You're a professional and a persistent communicator. You're not someone who just disappears when things get tough. Microsoft Excel Familiarity - Basic computer skills are necessary for managing your inspections. Compensation: Independent Contractors - You get paid per inspection. Fees - Vary based on location and inspection type, allowing for higher earning potential as you demonstrate competency. Why This Is Perfect for You: You've taught yourself how to solve problems and take on new challenges, and you're driven to succeed no matter the obstacles. This opportunity will allow you to create and or build your own business, and the flexibility to grow your income in an industry that remains resilient even through economic downturns. Ready to take control of your future and join a company that values your persistence and resourcefulness? Submit your resume now and become part of the CIS Group team! Job Types: Part-time, Contract Pay: $700.00 per month Benefits: Flexible schedule Compensation Package: 1099 contract Work Location: On the road

GIS Field Services, Inc. has been in the mortgage field inspection industry for over 20 years and is based out of Dallas, TX. We are looking to hire Mortgage Occupancy Field Inspectors to perform residential property inspections on behalf of mortgage lenders. Our independent contractors enjoy a flexible schedule while earning weekly pay. Please visit our website to learn more about us and the industry. ************************ Job Title: Mortgage Occupancy Field Inspector County Coverage: Caddo, Canadian, Cleveland, Grady, Kingfisher, Lincoln, Logan, McClain, Oklahoma, Pottawatomie, Seminole Mortgage Property Inspection Overview: Mortgage lenders require periodic updates on the properties they have financial interest in. The lender contracts with GIS to have inspectors go out to verify the property occupancy, report general property conditions, letter delivery/posting, vacant interior walk-through or insurance repair progress report. Majority of our inspections are basic exteriors where some do require contact by door knock or letter delivery. In addition, there will be some inspections which require interior access to secured/vacant properties and appointment-based insurance loss inspections. Job Responsibilities: Requires being able to spend extended periods of time driving Efficient time management to route and complete inspections with an estimated 3-5 day turnaround time (this can vary) in your agreed territory Make a determination of occupancy based on industry standards and report general property conditions Using a mobile app, InspectorADE, to obtain all photographs, comments, and form documentation Consistent communication with your inspection manager via text, email and phone Requirements: Experience preferred, not required Complete a background check using a valid driver's license to obtain a Shield ID (Aspen Grove ABC#) - If onboarded with GIS, we will provide you the link to obtain your Shield ID Computer and internet connection Vehicle with good gas mileage iPhone or Android Printer Volt Stick Set of 11 Hud Keys (Inspector Keys) - If onboarded with GIS, we will provide a link with a discount code to obtain your Hud Keys Daylight availability Office supplies (paper, envelopes, ink) Pay: Set rate per inspection ($15-$20 per hour based on location and the number of inspections performed) Payment - inspections are paid out every Friday for work completed and approved the prior week by direct deposit This is a 1099 Independent Contractor position

PRIMARY RESPONSIBILITIES Complies with all Company & Regulatory HS&E & Quality and IT standards and policies. Wears all Personal Protective Equipment (PPE) as required & maintains required HS&E & SQ certifications up-to-date Completes an annual visual acuity and color contrast vision examination. Corrective lenses must be utilized as determined by the testing results Complies with the requirements of various specifications such as API, DS-1, and the DRILCO Field Inspection Services Procedures Manual and is both knowledgeable and competent in their use and application Ensures that their team members arrive to the job on time with all essential equipment, tools and supplies needed to complete the job Maintains inspection vehicle and all associated equipment in an orderly, calibrated and certified condition, ready for audit and the next use Maintain adequate supplies to perform jobs in a timely manner Performs Risk Analysis (e.g. HARC, JSA) before each job or task and identifies & addresses potential safety hazards. Corrects and report hazards immediately to direct supervisor Executes successful jobs as per the request of the client. Recognizes all risks associated with the inspection process and reduces these risks to as low as reasonably possible. Sets up and calibrates equipment, successfully performs the required inspections, evaluates and interprets results with respect to applicable codes, standards, and specifications Effectively communicate inspection results to customers and supervisors, while following written procedures of the inspection process. Deliver quality results through accurate adherence Company policy and procedures as well as Industry specific standards as requested by the client Ensures that all personnel assigned to their responsibility are competent to complete their allotted job duties and responsibilities Completes all the required pre and post job documentation and job tickets on time and without errors as per company policy Ensures that all completed job documentation is returned to the operating district upon completion for expedited customer billing/invoicing Safely and efficiently utilizes all inspection tools and equipment to support the timely completion of assigned work orders and/or assigned duties, and to optimize throughput Leads and supports continuous improvement projects Develops technical knowledge through on the job training and certification classes Works with Manager to prepare for future career opportunities Coaches and mentors less experienced inspectors and inspector trainees Handles special projects as assigned All other duties as assigned by Supervisor MINIMUM REQUIREMENTS High School Diploma or GED equivalent Minimum of one-year experience in related field Must be willing to work long hours and be on call 24 hours/day Must be able to stand for long periods of time Good driving record required Excellent work ethic, demonstrated by a positive attitude and completing your work on time Excellent written and verbal communication skills Basic computer skills, MS Word, Outlook, Excel & Power Point Ability to work in adverse weather conditions Strong communication skills, including verbal, written and nonverbal communication Strong organizational, problem-solving, and analytical skills Ability to manage priorities and workflow

DUTIES AND RESPONSIBILITIES Assists in performing onsite visual bridge inspections according to National Bridge Inspection Standards (NBIS) or Specifications for the National Bridge Inventory (SNBI) State Bridge Inspection and associated Quality Control - Quality Assurance (QC/QA) requirements, FHWA inspection schedule, and Oklahoma Department of Transportation (ODOT) procedures. Assists with inspection report completion, including field observations, photographs, and measurements. Assists with preparation of bridge inspection submittal for appropriate county or municipality and ODOT, including reports, CDs, and maps. Attends and participates in annual ODOT and internal QC/QA training. Collaborates with team to coordinate workflow, file management, inspections, data entry and submittal schedules. Participates in proactive team efforts to achieve departmental and company goals. Complies with all safety policies, practices, and procedures. Performs other duties as assigned. COMPETENCIES Communication proficiency Technical capacity Accuracy and attention to detail Thoroughness MINIMUM REQUIREMENTS High school diploma or general education diploma (GED). One to three years' related experience and/or training preferred. English language skills: ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals; ability to write routine reports and correspondence; ability to speak effectively to CEC team members and clients. Mathematical skills: ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals; ability to compute rate, ratio, and percent and to draw and interpret graphs. Reasoning skills: ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form; ability to deal with problems involving several concrete variables in standardized situations. Proficient personal computer skills, including electronic mail, routine database activity, word processing, spreadsheet, graphics, etc. ODOT BrM familiarity preferred. Organizational skills: ability to prioritize and organize tasks; ability to handle multiple tasks simultaneously; ability to handle multiple projects simultaneously. Remote connectivity device (e.g., smart phone, tablet, etc.) with data plan sufficient for company requirements, including multi-factor authentication, time and mileage tracking, expense reimbursement, e-mail, and virtual communications. PHYSICAL REQUIREMENTS Ability to stand and walk for extended periods of time, frequently over uneven surfaces. Ability to traverse uneven terrain, climb over or crawl under obstacles. Ability to occasionally sit in vehicle more than four hours. Manual dexterity sufficient to reach/handle items and using hands to finger, handle or feel. Ability to sit and manipulate computer mouse up to eight hours per day. Ability to see clearly 20 inches or less and 20 feet or more; ability to identify and distinguish colors; ability to judge distances and form spatial relationships. Ability to lift and move up to 10 pounds frequently and up to 25 pounds occasionally. WORK ENVIRONMENT Work is primarily outdoors, including performing strenuous physical activity and exposure to changing weather conditions (rain, sun, snow, wind, etc.). Office work is in well-lighted, heated and/or air-conditioned indoor office/production setting with adequate ventilation and moderate noise. Requires use of protective and/or safety equipment. WORK SCHEDULE Fixed schedule of 40 hours per week, Monday through Friday. Flexible schedule may be required while traveling or during summer months. Occasional extended workdays up to 12 hours. Occasional overnight travel required. This position includes safety-sensitive job functions, and random screenings will be conducted in accordance with CEC's Drug and Alcohol Testing Policy. CEC is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, or other legally protected status.

**Country:** United States of America ** Onsite **U.S. Citizen, U.S. Person, or Immigration Status Requirements:** U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract. **Security Clearance Type:** None/Not Required **Security Clearance Status:** Not Required Pratt & Whitney is working to once again transform the future of flight-designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we're seeking the people to drive it. So, calling all curious. Come ready to explore and you'll find a place where your talent takes flight-beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we'll welcome you into a tight-knit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that's evolving fast to the future. At Pratt & Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond? F135 Heavy Maintenance Center Oklahoma City is looking for a Quality Inspector who is energetic and experienced in engine or aircraft maintenance to join the Quality Department. **What You Will Do:** + Perform a wide variety of inspection duties during repair and overhaul of engines, modules, subassemblies and components. + Verification of vendor repaired components for conformance to technical manuals, operation sheets, and engineering requirements. + Confirm forms, tags, and vendor certifications conformances with established process. + Measurement of indications on modules and components using a variety of calibrated tooling. + Perform visual and dimensional inspections of incoming and outgoing parts to determine serviceability or reparability in accordance with approved technical data. + Performs process audits to ensure Quality System compliance. + Enters various quality control data into the computer database. + Strong communication and interpersonal skills, with demonstrated ability to work effectively with associates at all levels of the organization. + Support First Article Inspections. **Qualifications You Must Have:** + Requires an AA/AS degree (or other 2-year post high school training) with a minimum of 8 years relevant experience. **Qualifications We Prefer:** + 10+ years of experience in aircraft / jet engine maintenance and/or quality inspection. + Broad knowledge and experience with jet engine construction and hardware. + F135 Engine maintenance experience. + Knowledge of precision measuring equipment and techniques. + Quality support experience in an aerospace environment, including quality systems and procedures, ISO, audits, calibration techniques, and AS9100. + Proven skills with Microsoft Office. + Lean Six Sigma background preferred, along with SAP MRO experience. **Learn More and Apply Now!** In addition to transforming the future of flight, we are also transforming how and where we work. We've introduced role types to help you understand how you will operate in our blended work environment. This role is: Onsite Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance workers, as they are essential to the development of our engines. For onsite roles, commuting to and from the assigned site is the employee's personal responsibility. **_As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote._** The salary range for this role is 60,000 USD - 114,000 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. _RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act._ **Privacy Policy and Terms:** Click on this link (******************************************************** to read the Policy and Terms Raytheon Technologies is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class.

Country: United States of America Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract. Security Clearance Type: None/Not Required Security Clearance Status: Not Required Pratt & Whitney is working to once again transform the future of flight-designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we're seeking the people to drive it. So, calling all curious. Come ready to explore and you'll find a place where your talent takes flight-beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we'll welcome you into a tight-knit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that's evolving fast to the future. At Pratt & Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond? F135 Heavy Maintenance Center Oklahoma City is looking for a Quality Inspector who is energetic and experienced in engine or aircraft maintenance to join the Quality Department. What You Will Do: Perform a wide variety of inspection duties during repair and overhaul of engines, modules, subassemblies and components. Verification of vendor repaired components for conformance to technical manuals, operation sheets, and engineering requirements. Confirm forms, tags, and vendor certifications conformances with established process. Measurement of indications on modules and components using a variety of calibrated tooling. Perform visual and dimensional inspections of incoming and outgoing parts to determine serviceability or reparability in accordance with approved technical data. Performs process audits to ensure Quality System compliance. Enters various quality control data into the computer database. Strong communication and interpersonal skills, with demonstrated ability to work effectively with associates at all levels of the organization. Support First Article Inspections. Qualifications You Must Have: Requires an AA/AS degree (or other 2-year post high school training) with a minimum of 8 years relevant experience. Qualifications We Prefer: 10+ years of experience in aircraft / jet engine maintenance and/or quality inspection. Broad knowledge and experience with jet engine construction and hardware. F135 Engine maintenance experience. Knowledge of precision measuring equipment and techniques. Quality support experience in an aerospace environment, including quality systems and procedures, ISO, audits, calibration techniques, and AS9100. Proven skills with Microsoft Office. Lean Six Sigma background preferred, along with SAP MRO experience. Learn More and Apply Now! In addition to transforming the future of flight, we are also transforming how and where we work. We've introduced role types to help you understand how you will operate in our blended work environment. This role is: Onsite Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance workers, as they are essential to the development of our engines. For onsite roles, commuting to and from the assigned site is the employee's personal responsibility. As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 60,000 USD - 114,000 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms