Inspector jobs in Pinecrest, FL - 273 jobs

Job Purpose The QC Labeling Inspector is responsible for maintaining a high level of inventory accuracy and integrity within the Tissue Bank. Performs final product labeling and inspections, manages transport and storage of quarantine tissue, and maintains labeling supplies. Promotes Lean Behaviors across the organization (This includes Participating in Try storming, Brainstorming and Lean Related Initiatives). Promotes Usage of Problem Solving. Ensure that Labeling Operations are in Compliance with the State and Federal Regulations and AATB Standards. Duties and Responsibilities Preparation of the QC Labeling areas as specifically described in SOPs. Performs final inspection of products for proper specifications, label accuracy, and compliance with applicable regulations, standards and Vivex Biologics, Inc. quality requirements. Combines components for final products. Applies labels to final product and adds package inserts, boxes, etc. Maintains accurate inventory of post-processing, quarantine products (frozen and room temperature). Performs disposition of nonconforming products as directed. Coordinates and stages products for sterilization. Monitors freezers and responds to alarms. Supports nonconformance investigations, when applicable. Maintains knowledge of applicable regulations and standards related to storage, handling, labeling and inspections of tissue. Maintains effective communication with management when issues arise to obtain appropriate instructions to address the issues. Performs other duties as assigned by management. Requirements Qualifications High School/Minimum of 4 Years of Relevant Experience. Associate/Minimum of 1 Years of Relevant experience. Bachelors/Minimum of 0-1 Years of Relevant experience Working Conditions Work is indoors in environmentally controlled conditions. Overtime may be required to meet production deadlines. Some on-call and weekends may be required. Physical Requirements Able to stand for extended period. Able to lift 25 lbs. without assistance. Must be able to infrequently lift, push, pull and carry boxes weighing up to 25 pounds. Walk, squat and bend over for intervals of 15-30 minutes, with or without reasonable accommodation. Direct Reports No direct reports. Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job any time. Vivex Biologics, Inc. is an equal opportunity employer (EEO) and expressly prohibits any form of workplace discrimination and/or harassment based on race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, or veteran status. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, transfers, leaves of absence, compensation and training. Vivex Biologics, Inc. with the Americans with Disability Act (ADA) which prohibits discrimination against qualified individuals with disabilities who, with or without reasonable accommodation, can perform the essential functions of a job.

Property Inspector Looking for a career that pays well without the pressure of selling? Join our team and earn $50K to $75K per year - no selling involved! Responsibilities: • Canvass neighborhoods to find old original windows, door, bathroom and damage roofing • Schedule FREE estimate appointments for windows doors, bathroom and roofing • Work outdoors and engage directly with homeowners Qualifications: • Outgoing personality • Strong communication skills • Driven to achieve goals Compensation: • Salary, Commission & Bonus (Earn $50K to $75K per year) • 5-day work schedule (No Weekends!) • Full training provided • Career growth opportunities Apply Now! Send your phone number and updated resume. Qualified applicants will be contacted for a phone interview.

Role Summary/Purpose: Perform non-destructive tests (NDT) on aircraft engine components. Inspect metallic and nonmetallic materials, parts and assemblies for discontinuities or defects using automated and manual methods and techniques which include liquid penetrant, magnetic particle, ultrasonic, x-ray, and eddy-current. Essential Responsibilities: Inspection of parts in accordance with manufacturers' repair/overhaul manuals or other specifications for the interpretation to ensure quality or detect discontinuities (defects) Set up, operate, calibrate and perform Process Control Checks on NDE equipment by following established instructions and record results. Organize and report inspection results Maintain a clean and safe work environment Qualifications / Skills: High school diploma Non-Destructive Testing (NDT) Certification in one or more of the following methods: Liquid Penetrate, Magnetic Particle, Eddy Current, Ultrasonic, X-ray Must be a US Citizen or US Permanent resident Written and verbal communication skills including the ability to read, write, understand and communicate in English Near Vision: 20/25 (Snellen) at 16” (42 cm) ± 1” (2.54 cm) or equivalent in at least one eye, natural or corrected and capable of adequately distinguishing and differentiating colors used in the process involved Physical Demands / Work Environment The physical demands and work environment described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Frequently required to sit, stand, regularly use full range of motion of upper and lower extremities, regularly lift and /or move up to 10 pounds, frequently lift and/or move up to 25 pounds and occasionally lift and/or move up to 50 pounds. Exposure to chemicals, noise, varying temperatures, and other workplace hazards however, PTI has established process, procedures, and protective equipment to reduce or eliminate exposures to these hazards and full compliance is a requirement of the job. About Us Propulsion Technologies International, LLC (PTI), a joint venture between GE Aviation & Safran Aircraft Engines, offers a great work environment with fast-paced, challenging and rewarding careers. Both GE & Safran are world leaders in the design and manufacture of aircraft engines, propulsion systems, & aircraft equipment. This could be your opportunity to join the exciting aviation industry! We are an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. PTI will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen.

Quality Control Inspector Immediate need for a Quality Control Inspector for a manufacturing and construction company in Miami, FL to join our team. The ideal candidate will play a crucial role in ensuring that our products meet or exceed industry standards and customer expectations. RESPONSIBILITIES: * Ensure all products and processes comply with AISC, company, and industry quality standards. * Inspect raw materials, in-process components, and finished steel products through visual checks, measurements, and NDT methods to verify conformance to specifications. * Perform inspections on fabricated and erected steel structures to confirm compliance with design and detailing requirements. * Document and report inspection findings, nonconformities, and root cause analyses; collaborate with production and engineering teams to implement corrective and preventive actions. * Participate in design and scope reviews, validation, and final product approval processes. * Maintain quality documentation, inspection records, and provide data for management review meetings. * Support continuous improvement initiatives to enhance product quality, process efficiency, and safety compliance. * Ensure adherence to all AISC quality assurance procedures, regulatory requirements, and company safety policies. * Contribute to training, audits, and professional development activities as needed. QUALIFICATIONS: * 2+ years' experience with Structural Steel required. * Knowledge of AISC Process. * Detail oriented with ability to multi-task in a fast-moving environment with shifting priorities and changing requirements. * Fluent in the English language, in both oral and written form, required, bilingual in the Spanish language preferred. * Leadership abilities and able to identify and resolve problems. * Strong proficiency with Microsoft Office tools required. * Proficient in the ability to read and interpret drawings and technical documentation; and * Ability to work well under pressure and be able to assist in expediting shipments when necessary, working in conjunction with Production and Shipping schedules. * Ability to foster and promote a positive work environment. EDUCATION/TRAINING/EXPERIENCE: * 3+ years of responsibility in quality management required; within a manufacturing environment preferred. * Experience working in a manufacturing environment preferred. * Must have experience using various mechanical inspection tools, such as computers, micrometers, height gauge, radius gauge, pin gauges, protractors, and calipers. * Experience working with machined parts, assemblies, and/or sub-assemblies preferred. * Civil or Industrial Engineer preferred. BENEFITS: * 401(k) with matching contributions * Health insurance (medical, dental & vision) * Paid time off

Description Job Title Quality Control Inspector Company Snapshot: Born in Miami more than a quarter of a century ago, Tuuci is the global leader in premium shade and placemaking products for hospitality, commercial, and residential outdoor settings. From locations in North America, Europe and Asia, our teams strive to meet and exceed the Tuuci vision: to help people live their best life outdoors through inspiring design, enduring performance, and convivial service. We work in a fun, fast-paced, and diverse environment in which close collaboration and the spirited exchange of ideas are encouraged. Our culture supports our vision by encouraging creativity, driving excellence, and supporting personal growth and development. Tuuci is searching for a team member who embodies passion and performance in the Quality Control department. The Quality Control Inspector position inspects raw materials, finished products and the procedures of the entire production cycle to ensure efficiency and consistency. Other responsibilities include but not limited to: Essential Duties and Responsibilities: Conduct audit inspection on the in-process, process procedure and finished goods products by confirming specifications using drawings and procedures. Approve or reject raw materials with respect to quality standards. Document inspection results by completing reports and logs. Assist in determining the root cause and the implementation of a corrective action. Organize the disposition of rejected materials and log all rejected materials. Measure products with rulers, calipers, gauges, or micrometers. Monitor operations to ensure that they meet production standards; recommend adjustments to the production process. Document the QC results by preparing reports of the findings; ensure materials are checked in with the required paperwork and is in proper condition. Maintain safe and healthy work environment by following standards and procedures. Assist in the development of SOPs. Other tasks as assigned. Education and Qualifications: We prefer candidates with 2 years of quality control, receiving and inspection experience. Experience working in warehouse or manufacturing environment. Experience with reading engineering drawings, measuring tools and proficiency in MS Word and Excel. Lift up to 45lbs. Must be Fluent in English and Spanish. This is a full-time, day shift position hours are Monday through Friday from 7:00am to 3:30pm and occasionally require overtime up to 5:30pm and Saturdays. Tuuci is an equal opportunity employer. All applicants and employees are to be treated equally with the same rights and privileges with respect to recruiting, hiring, promotions, demotions, transfers, separations, compensation, and benefits regardless of their age, race, color, creed, religion, or ethnic origin, sex, sexual orientation, pregnancy-related status, marital status, veteran status, physical or mental disability, where the individual is otherwise qualified, or any other category protected by applicable law. This employer participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. If E-Verify cannot confirm that you are authorized to work, this employer is required to give you written instructions and an opportunity to contact Department of Homeland Security (DHS) or Social Security Administration (SSA) so you can begin to resolve the issue before the employer can take any action against you, including terminating your employment. Employers can only use E-Verify once you have accepted a job offer and completed the Form I-9. *************

For nearly 30 years, DASI has been in the business of providing comprehensive aircraft inventory support for airlines, MROs, OEMs, and distributors. Headquartered in Miami, Florida, with service centers in London and Singapore, DASI is a truly global partner, serving customers' parts and inventory needs in more than 140 countries. DASI is embracing the potential of online sales and their digital marketplace, which has been growing exponentially and has tremendous potential with the right technology team in place to support and take it to the next level. Purpose: At DASI, the role of the QC Inspector is to ensure that all incoming and outgoing material is being checked for compliance to customer and/or DASI standards. Key accountabilities: Investigate NCM (Nonconforming Material). Control the segregation and proper disposition of material designated by the Material Review Board. Collect data for QA to use in training and performance evaluation of inspection staff. Coach Inbound and/or Outbound inspection teams to recognize errors and areas for improvement. Scrap process as required. Participate in Continuous Improvement Projects (CPAR's). Perform all other duties as assigned. Key skills and competences: Focus on delivering exceptional customer service. A pro-active team worker with warehouse experience ideally in an aerospace related business Ability to be flexible, responsive and enthusiastic. Able to cope well under pressure and resolve issues and problems using their own initiative. Able to work effectively to tight deadlines and targets. Looking for a challenging role in which they can develop personally and professionally. Results driven, taking pride in achieving objectives. Ability to work in a fast-moving environment where a pro-active, can-do attitude is needed to achieve goals. Experience and qualifications: High school diploma or equivalent required. Minimum 2 years of processing aviation surplus parts is required. ISO and/or AS Quality Standard knowledge, a plus. DASI, LLC. and group companies are an Equal Opportunities Employer

Requirements Required Skills & Qualifications Ability to understand, speak, read and write English Self-starter and/or team player with strong verbal, written, and communication skills. Courteous professional manner when interacting with all employees. Solid technology skills with ability to utilize and learn various types of technology. Strong interpersonal skills to handle sensitive and confidential situations while demonstrating poise, tact, and diplomacy Efficient and high standards of accuracy and organization in performing tasks Strong decision making skills and ability to prioritize work; effective time management skills Analytical and problem-solving skills to find solutions to various problems; good vision, and mathematical competency Proficient in Microsoft Office, including Word, Excel, internet and email Ability to interact with all levels of the organization while maintaining integrity and strict confidentiality regarding sensitive information Solid knowledge of workplace safety regulations and procedures to ensure compliance with health and safety standards. Experienced with production tracking systems and software to monitor performance, optimize processes, and ensure efficient operations. High School Diploma or equivalent 2 years' experience in manufacturing setting Mittera is a leading-edge company that provides commercial and digital printing, finishing, graphic design, data analytics, direct mail processing, and fulfillment services. Mittera's full-service approach connects data-driven revelations, bar-raising creative, and expertly printed materials to give our customers' brand recognition it deserves. Competitive compensation and robust benefits plans are offered. Benefits include: Medical Dental Vision Life and AD&D Policies Short and Long-Term Disability 401K with Company Match Paid Time Off Paid Volunteer Time Off Location specific benefits should go here! Mittera is proud to be an equal opportunity workplace. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender identity, or Veteran status. We also consider qualified applicants regardless of criminal histories, consistent with legal requirements. All applicants must be 18 years of age or older. Visit us today at mittera.com or stop by and fill out an application at Mittera location near you!

CAP Government, Inc. is seeking the immediate hire of a licensed QC Multi-Disciplined Code Inspector needed for construction project inspection and plan review services. The work involves interpreting and applying these regulations to customer relations, reviewing building construction blueprints, product approvals, shop drawings, and other project documents. Some travel may be required for inspections and/or managing projects in the assigned area. Candidates must possess a professional demeanor, have both technical and industry experience, and be a team player. Duties, Responsibilities, and Qualifications Demonstrates excellent communication and customer service skills. Will visit the job site full-time (M-F), 40 hrs. per week, performing the following minimum tasks: Reviewing, observing, and verifying that construction conforms to the scope of work identified by the approved construction documents Observing and verifying that construction conforms to all applicable codes, standards, and guidelines, including the applicable International Codes, local codes, and DoD Standards. Writing/Updating field reports. Experience with MS Office (MS Word) is required. Experience with MS Excel and Adobe Acrobat is highly recommended and desired. Taking photos of construction progress Uploading photos and field reports to our file sharing website for viewing by client Reporting on removal or repair of defective or unsuitable work Reviewing contractors' monthly payment applications and recommending payment to owner Completing a monthly Design & Construction Status Report and distributing to the client Issuing Certificates of Occupancy and/or Certificates of Completions Verifying completion of punch lists Perform other related duties as assigned by the Manager Education/Experience: State of Florida Plan Review License (PX) or provisional license in building, electrical, mechanical, and/or plumbing; or State of Florida Inspector License (BN) or provisional license in building, electrical, mechanical, and/or plumbing, or ICC Residential & Commercial Plans Examiner and/ or Inspection certification in building, electrical, mechanical, and/or plumbing; or Minimum 5 years of experience performing code compliance inspections is required Bachelor's degree in the construction or design field is desirable 3 years in construction administration or superintendent/construction manager role is desirable Experience in managing construction projects as an architect, superintendent, project manager, or similar role, specifically during the construction administration phase of a project is desirable Must have knowledge of the Florida Building Code and other regulations pertaining to construction and development. Ability to understand and interpret codes and evaluate project proposals and projects under construction to verify conformance with code requirements. We offer competitive compensation packages; medical, dental, and vision coverage; life insurance, short- and long-term disability insurance; 401(k); employee referral; educational reimbursement; and more. Salary: Commensurate with experience and licensure Equal Opportunity Employer / Drug-Free Workplace / Veterans Our firm is committed to diversity in the workplace. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, national origin, disability, protected veteran status, gender identity or any other factor protected by applicable federal, state or local laws.

Aoka is a third-party municipal services provider supporting federal, state, and local governments with code compliance, inspections, and consulting services. We specialize in delivering efficient solutions for building safety, housing standards, and regulatory compliance. Our proprietary software, VertexPlans, streamlines inspection services by integrating plan reviews, field inspections, and reporting into one seamless platform-ensuring faster turnaround times and improved communication for our clients. We are currently seeking a qualified OHP compliance Inspector to perform Housing Quality Standards (HQS) inspections for Senior care facilities. Responsibilities Schedule and conduct on-site inspections for new construction and substantial rehabilitation of Senior Living properties Evaluate units for compliance with HUD Housing Quality Standards (HQS) Complete inspection reports and required documentation in accordance with HUD and company guidelines Qualifications Willingness to travel for inspections Valid driver's license and reliable transportation Education & Experience ICC certification, engineering license, or architectural license OR At least 5 years of experience in multifamily housing inspection is required Compensation $30 - $60 per hour, based on experience and qualifications Apply Now to Join Our Growing Team! Aoka is proud to be an equal opportunity employer and provides equal employment opportunities (EEO) to all employees and applicants without regard to race, color, religion, sex, national origin, age, disability, veteran status, sexual orientation, gender identity or genetics.

Property Inspector Start Your Career in the Field - No Experience Needed Earn $50K to $75K - no selling involved! Responsibilities: • Canvass local neighborhoods to identify homes with old original windows and roofing • Talk with homeowners about the benefits of brand new impact windows & roofing • Schedule appointments for FREE inspections Qualifications: • No experience required (We'll Train) • Outgoing personality • Strong communication skills • Driven to achieve goals Compensation: • Salary, Commission & Bonus (Earn $50,000 to $75,000 per year) • 5-day work schedule • Full training provided • Career growth opportunities Apply Now! Send your phone number and updated resume. Qualified applicants will be contacted for a phone interview.

Miami Air International, with its modern fleet of Boeing 737 aircraft, is the premier provider of private group air transportation, commonly called chartered flights. It's not just a flight. This is a travel experience that is tailored to delight your group. We understand that each group is unique and personalizing the right services and flight amenities is critical, and at the heart of why you are considering a charter. All we do is charter. And we do a lot! Our business is built to only serve groups like yours, and you are our number one priority. In addition to concentrating our efforts on being the best in those things you want from any airline - like industry leading safety-programs and over 25 years of proven reliability and financial stability - we provide a suite of services unparalleled by any other airline. Sound like a match? You're in luck. Miami Air is currently seeking a highly motivated and personable individual to join the company as a Quality Control Inspector responsible for the efficient and economic determination of the airworthiness of aircraft, engine, appliance and component maintenance actions as assigned, and conduct inspections in accordance with the Maintenance Program, AD, SB or other requirement to ensure aircraft, engines, appliances and components are maintained to a prescribed standard in order to continue their airworthiness. Functions & Responsibilities Perform preliminary, in progress, hidden damage, and final inspections. Performs special inspections as detailed by the requesting or requiring document. Performs Required Inspection Item (RII) and Buy Back inspections. Perform receiving inspections to ensure the use of legal, conforming and applicable parts and materials. Ensure that inspections and surveillance are performed as required on necessary maintenance actions in order to assure the use of approved data, material, tools, test equipment and that high standards of workmanship are present. Provide guidance and assistance to maintenance personnel in order to train, maintain and enhance compliance to programs, policies and procedures. Conduct daily audits of aircraft work packages including checks/inspections forms, log pages, routines and non-routines, modification orders, etc. to ensure completion, correctness, use of appropriate references to approved data in all entries and forms. Review the aircraft and engine logbooks, using the same criteria as described in item f above, at checks and during accomplishment of any maintenance. At the appropriate checks, transcribes all pilot reports and deferred maintenance items to the appropriate work forms. Conduct records analysis of audits and reviews of data/information for continuing analysis and surveillance reports as identified by the Manager, QC/QA & Training. Lead and maintain the current the Structural Defect Log as assigned. Review and address the calibrated tools and equipment status and shelf-life status and ensure correction of any discovered discrepancies during the first 10 days of each month. Perform as a “Designated Instructor” in areas and/or on subjects as qualified and approved by the Manager, Maintenance Training and QA. Perform the inspections of S.O.S. Tag items and documents results per the S.O.S. program. Complete safety and housekeeping checks of hangar and line work areas on a routine basis as designed and assigned by the Manager, QC/QA & Training. Perform other duties as necessary within the scope of quality. Qualifications & Requirements Associate degree A&P Mechanic License Airman's Certificate with A&P ratings for a minimum of 3 years. 3 years of experience as licensed A&P mechanic with 2 years of maintenance experience on large aircrafts. Boeing 737 experience, Classic and NG preferred. ETOPS and RVSM operations experience. Knowledgeable of the FARs, GMM, Maintenance Programs. Excellent written and oral communication skills. Proficient with Microsoft applications. Knowledge of TRAX systems, a plus. Knowledgeable of manuals and publications skills, a plus. Miami Air International provides equal employment opportunities to all legally eligible and authorized to work applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

To perform inspections covering the repair and/or disassembly of aircraft engines from Willis Lease's fleet and Third-Party Customers coming through the Repair Station. Performs a variety of tasks within a team environment and is self-motivated, driven by results, achievement, and in meeting goals. Responsibilities: Perform inspections of incoming and outgoing engines, components, and materials to meet quality control requirements as stated in the repair station quality control manual. Determine that no defective, unserviceable, or non-airworthy condition exists prior to release to service, check all documentation. Check incoming engines, components, and materials for hidden damage. Consult with Powerplant Engineer and generate inspection reports as needed. Perform shipping and receiving duties. Mentor Inspector I in proper inspection tool usage, inspection report writing, and complex inspections required for Insepctor II. Qualifications / Requirements: Must have High School Diploma or equivalent experience. 5 - 9 years years of experience and Powerplant license required for Inspector I; 10+ years of experience and Powerplant license required for Inspector II. Minimum 5 years of experience with 2+ types of engines required (CFM56-5B, CFM56-7B, and/or V2500). FAA P License required (FAA A&P license preferred). Proficient in conducting engine inspections to include QEC Inventories, GVI, and DI. Generate inspection reports for engines and components. Familiar with all inspection methods, techniques, and equipment used to determine the quality and airworthiness of engines, components, and materials undergoing maintenance, repair, or alteration. Knowledge and familiarity of FAA airworthiness directives, service bulletins, manufacturer's maintenance manuals (AMM, ESM, PPBU, CMM), illustrated parts catalog, and engine shop manuals. Proficient with current software packages, Microsoft Word, Excel, Outlook, PowerPoint, and other similar repair shop repair and tracking systems. Able to communicate effectively, both orally and written. Must be able to read, write, and understand the English language. Ability to lift or pull objects weighing as much as 70 pounds frequently. Agility to stand, lie, or kneel in awkward positions or in confined spaces and to perform work from scaffolds or ladders. Manual dexterity is required to operate tools to adjust and repair. Sufficient visual acuity to inspect equipment for defects. Travel/Misc.: Light - as needed. Here at Willis Lease Finance Corporation (WLFC), we are dedicated to fair hiring practices and diversity in the workplace. We are committed to a workplace environment that encourages growth and respect for all current and prospective employees based upon job-related factors such as their educational background, work experience, and ability to perform the essential functions of a particular job. It is the policy and practice of WLFC to prohibit any form of discrimination or harassment based on race, color, age, national origin, religion, sexual orientation, sex (including pregnancy, childbirth, or related medical conditions), gender identity or gender expression, military or veteran status, physical or mental disability, genetic information, or any other status protected under applicable Federal, state or local law. WLFC is committed to providing reasonable accommodations for qualified individuals with disabilities and disabled veterans in our job application processes. If you need assistance or an accommodation due to a disability, you may contact us at **********************. WLFC also offers a comprehensive benefit package to its eligible employees. This includes medical, dental, vision, 401(k), Roth 401(k), HSA in conjunction with a high deductible plan, life insurance, supplemental insurance, travel accident insurance, employee assistance program, short & long-term disability, employee stock purchase plan, employee education reimbursement plan, matching gift program, health and wellness plan, and paid time off. To Executive Search Firms & Staffing Agencies: Willis Lease Finance Corporation (WLFC) does not accept unsolicited resumes from any agencies. All unsolicited resumes will be considered WLFC property, and WLFC will not be obligated to a referral fee. This includes resumes submitted directly to any WLFC employee, including Hiring Managers, without contacting WLFC Human Resources Talent Acquisition Department.

QUALITY CONTROL BENCH INSPECTOR Responsibilities include but are not limited to: Reading and adhering to the published Workscope, as revised. Performing Receiving Inspection of incoming engines to identify visual non-conformances on the engines as-received. Documenting discrepancies (Damage Report) and generating Non-Routines, Manila Tags or 227's as required to initiate the repair of the noted discrepancies per SOP 14-006 R1. Performing Incoming & Outgoing Inventory Inspection of LRUs. Perform EMU and/or piece part inspection of disassembled engines, identifying and documenting non-conformances. Recording the status of all inspected parts on the QC 227C (Unserviceable and Serviceable parts alike), and proper routing of parts to restore them to serviceable condition in a timely and accurate manner. Routing parts to Outside Vendors and accurately documenting identification data and work required in Quantum. Also responsible for overseeing maintenance actions in progress and documenting required data on maintenance forms as maintenance actions are accomplished. Minimum Job requirements: Minimum FAA “P” Certificated; 2 years Minimum CF6 engine experience; Ability to navigate the OEM Manuals and to read and understand technical data; must have working knowledge of the Quantum Operating System. Requirements MINIMUM REQUIREMENTS: Must possess a valid FAA A&P or Powerplant Certificate Read & Write English Able to Read and Comprehend OEM Engine Manuals, IPC's, SPM's, AMM's and other Approved Data 2 Years' Experience on CF6 Engines (is a plus) Computer Skills Able to use MS Outlook (Email), Word & Excel Must be COACHABLE (Able to Listen, Learn and Follow Instructions) / Have a Good Attitude / 2 Years with CTS Engines ** Applicants must be U.S. Citizens or Permanent Residents to be considered, we don't have sponsor plans at the moment**

DynaServ, a Monarch Landscape Company Monarch Landscape Companies is a family of successful landscape brands in eight states across the United States. We are a values-based learning organization committed to being the best place to work as a landscape professional. At Monarch Landscape Companies, your achievements determine your rewards, your abilities define your success, and your professionalism leads to autonomy! JOB SUMMARY: The Landscape Inspector - National Division supports the organization's operational, quality, and client service objectives by conducting consistent, objective, and documented inspections across national account properties. Reporting to Area Manager, National, this role is responsible for evaluating landscape maintenance quality, verifying contract compliance, identifying safety concerns, and documenting deficiencies. The Landscape Inspector partners with Operations, Account Management, and Branch Leadership to support corrective actions, continuous improvement, and service standardization across multiple regions. MINIMUM QUALIFICATIONS: Education High school diploma required. Associate's degree or coursework in horticulture, landscape management, agriculture, or related field preferred. Experience 3-5 years of experience in landscape maintenance, inspections, quality control, or field operations. Experience supporting multi-site or national commercial accounts preferred. Experience working independently across multiple locations. License or Certification Valid driver's license required. Landscape Industry Certified, ISA, or equivalent preferred. Specialized Skills Strong knowledge of turf, horticulture, irrigation, pruning, and landscape best practices. Ability to interpret landscape contracts, scopes of work, and service specifications. Strong written documentation and reporting skills. Proficiency with mobile inspection tools, Microsoft Excel, Outlook, and Word. Strong attention to detail and objective assessment skills. Ability to use mobile applications Physical Requirements Frequently required to walk large commercial properties for extended periods. Ability to bend, kneel, climb, and inspect landscape elements. Ability to work outdoors in varying weather conditions. Occasionally required to lift up to 25 pounds. Work Conditions Primarily field-based across multiple commercial properties. Frequent regional or national travel, including overnight stays. Administrative and reporting work completed remotely or from branch offices. Regular interaction with Operations, Account Management, and Branch Leadership teams. Essential Duties & Responsibilities Conduct scheduled and unscheduled landscape inspections across national account properties. Evaluate turf health, horticultural quality, pruning practices, irrigation performance, hardscape conditions, and overall site appearance. Assess safety conditions, equipment usage, and adherence to OSHA and company safety standards. Identify deficiencies and assign corrective actions with defined timelines. Complete detailed inspection reports including photographs, scoring metrics, and observations. Track trends, recurring issues, and regional performance gaps. Maintain inspection records within company and client systems. Provide summary reports to National Operations and Leadership. Verify services align with contract scope, frequency, and specifications. Participate in client walkthroughs, audits, and performance reviews as required. Partner with Branch Leadership and Area Managers. Identify training and coaching opportunities. Support onboarding of new national account sites. Communicate operational risks and service barriers to leadership. TOTAL REWARDS At Monarch, we strive to deliver a Total Rewards package that will attract, engage, and retain top talent. Elements of our Total Rewards package include competitive base pay and variable compensation opportunities. Monarch also provides eligible employees with an array of additional benefits, including: The opportunity to enroll in a variety of healthcare benefit programs, including medical, dental, and vision plan options; flexible spending accounts; retirement savings plans; term life/ad&d; and a number of supplemental insurances Company Provided Life/AD&D Employee Assistance Program 7 Paid Holidays 3 Days Paid Bereavement 5 Days Paid Jury Duty Employee Equity Program Paid Time Off Starting at 2 weeks per year On-Demand Pay Through A Partnership with DailyPay Referral Bonuses Programs Gym Membership and Mobile Carrier Discounts Education Assistance Best-in-Class Learning Management System Career Advancement Opportunities The specific programs and options available to any given employee may vary depending on eligibility factors such as position, tenure, geographic location, and the applicability of collective bargaining agreements. Please note that the salary information shown below is provided in compliance with state specific laws. Salaries are based upon candidate experience and qualifications, as well as market and business considerations, and therefore may be different in other locations or operating divisions. Pay Range: $18 - $20 per hour DynaServ is an E-Verify participating employer DynaServ is an On Demand Daily Pay employer

GotWorX, Inc. Is currently seeking a Quality Control Inspector for our client based in the Tamarac area. This is a temp-hire opportunity for the right candidate. Client is currently offering a salary of $ 18 pay rate, plus a benefits package once perm employee! Overview: The Quality Control Inspector ensures that incoming, in process, and finished parts are within all required specifications per drawings and work instructions. It is the Quality Control Inspector s responsibility to implement good documentation practices (GDP) and proper material identification, preventing nonconforming material from continuing through the process without proper approval, to ensure that the customer gets parts that function properly every time. Responsibilities: Performs area specific internal quality audits Performs area specific 5S audits Performs random in-process audits in designated areas Performs first piece inspection audits for team members as required Maintains and stores inspection equipment appropriately Verifies presence of calibration sticker before using measurement device Notifies manager of equipment with past due calibration Notifies manager of calibrated items that need attention Reviews and provides feedback on procedures, policies, and processes Applies proper sampling methods (AQL) managing risk and cycle time Interprets and inspects mechanical drawings (GD&T literate) Maintains all inspections records or other required documentation Coordinates, implements, and documents containment actions Actively supports conducting root cause investigations In order to be considered, we require: High School Diploma or GED required Prior experience in quality control field preferred Prior inspection experience preferred Prior forklift experience preferred Prior machining / CNC experience preferred Prior SAP experience preferred Candidates will be required to complete a background check and drug screen before beginning work.

LTD. (NASDAQ: FTAI) FTAI owns and maintains commercial jet engines with a focus on the Maintenance, Repair and Exchange (MRE) of CFM56 and V2500 engines. FTAI's propriety portfolio of products, including The Module Factory and a joint venture to distribute engine PMA helps make CFM56 and V2500 engine maintenance simpler, more cost-effective, significantly faster, and more environmentally friendly. Additionally, FTAI owns and leases jet aircraft which often facilitates the acquisition of engines at attractive prices. FTAI invests in aviation assets and aerospace products that generate strong and stable cash flows with the potential for earnings growth and asset appreciation. FTAI operates globally and has offices in New York, Miami, Montreal, Singapore, Dubai, United Kingdom and Ireland. JOB OVERVIEW The Lead Detail Inspector(s) are responsible for the direct oversight of the Detail Inspection team, performing preliminary, hidden-damage, in-process, final Inspections, and perform return to service functions on all civil aviation articles received by this repair station in accordance with the current technical data provided in the manufacturer's instructions for continued airworthiness, operator technical data, service bulletins, service letters, airworthiness directives, government and industry standard practices, and other data acceptable and/or approved by the FAA. Responsibilities: * Oversee and coordinate inspections of the maintenance, preventive maintenance, or alteration of a powerplant, aircraft or appliance, or a part thereof, received at this repair station. * Oversee and coordinate inspections and required inspections in accordance with the methods, standards, and limits required by the accepted or approved data to determine that the work was satisfactorily completed. * Audit all inspection paperwork for completeness, task compliance, and deliver finalized documents to Records Dept. * Assist and train new and current inspectors in performing inspection tasks as specified on Company job cards, repair, and routing travelers, recording discrepancies as required. * Oversee the work performed by Inspectors who are unfamiliar with the methods, techniques, practices, and equipment used to perform maintenance, preventive maintenance, or alterations. * Lead Root Cause Analysis for nonconformances and audit corrective actions, including installed parts/material tags, tools and equipment used, proper signoff and references. * Ensure work performed by outside sources and incorporated in articles undergoing maintenance, preventive maintenance, or alteration was properly performed and documented. * Oversee and coordinate receiving inspection on incoming parts, materials, and tooling to ensure Company standards and requirements are met and generate the applicable identification tags. * In the absence of the Director of Inspection lead the Detail Inspection activities. * Communicate efficiently with all employee levels. Qualifications: * Airframe and Powerplant license * High School or equivalent and basic computer skills * Must possess exceptional attention to detail and proficiency in the inspection methods, techniques, aids, tools, and equipment used in aircraft jet engine maintenance. * 3 - 5 years experience as an inspector for aircraft jet engine maintenance. * Familiar with all regulatory requirements that govern the maintenance of aircraft jet engine. * Must be able to communicate Inspection Priorities to inspection personnel in a clear and concise manner. * Be able to read, write, speak, and understand the English language. * Must be legally authorized to work in the U.S Preferred Qualifications: * Experience as a Lead Inspector preferred. * Experienced with borescope inspection and interpretation of technical data during the borescope process preferred. Job Demands: Work is performed in a Shop environment and requires the ability to perform extensive standing, driving, walking, and climbing; to lift up to 50lbs. regularly; to manipulate up to 100lbs. with assistance. Must be able to bend, stoop, climb to reach materials, and work in a noisy environment. Equal Opportunity Employment Statement: Our company is an equal opportunity employer. We do not discriminate against any employee or applicant based on race, color, religion, national origin, age, sex (including pregnancy), physical or mental disability, genetic information, sexual orientation, gender identity, marital status, veteran status, or any other characteristic protected by applicable federal, state, or local laws.

Mittera is looking for a Quality Inspector to join our growing team! The Quality Inspector will be responsible for developing, implementing, and maintaining comprehensive quality management systems that ensure our products consistently meet and exceed the highest industry standards. This role is critical in maintaining our reputation for excellence in our printing and collectible card production. Key Responsibilities * Perform inspections (in process, incoming and final) per procedures. * Release all acceptable finished goods, quarantine problematic finished goods for QA analysis. * Collect, review, and distribute Customer Samples based on Customer requirements * Collect, review, and file Retains. * Conducts WIP quality checks in each production department * Quarantine tag production that is outside of normal Mittera quality standards. * Sorts nonconforming product when required. * Notify Management immediately when any quality issue jeopardizes the completion of the order specified quantity. * Ensures tests and procedures are properly followed during production * Provides other assistance to the Quality Assurance Manager as requested * Works proactively to promote teamwork at all levels of the company * Conforms with and abides by all regulations, policies, work procedures, safety rules, security procedures and instructions * Performs all duties according to established safety policy, including wearing any required PPEs to perform duties as applicable * Willing to work flexible hours as needed * Ensure security of confidential Customer records and data * Special projects as assigned, working independently and/or within a team * And other job duties as assigned. Requirements Required Skills & Qualifications * Ability to understand, speak, read and write English * Self-starter and/or team player with strong verbal, written, and communication skills. * Courteous professional manner when interacting with all employees. * Solid technology skills with ability to utilize and learn various types of technology. * Strong interpersonal skills to handle sensitive and confidential situations while demonstrating poise, tact, and diplomacy * Efficient and high standards of accuracy and organization in performing tasks * Strong decision making skills and ability to prioritize work; effective time management skills * Analytical and problem-solving skills to find solutions to various problems; good vision, and mathematical competency * Proficient in Microsoft Office, including Word, Excel, internet and email * Ability to interact with all levels of the organization while maintaining integrity and strict confidentiality regarding sensitive information * Solid knowledge of workplace safety regulations and procedures to ensure compliance with health and safety standards. * Experienced with production tracking systems and software to monitor performance, optimize processes, and ensure efficient operations. * High School Diploma or equivalent * 2 years' experience in manufacturing setting Mittera is a leading-edge company that provides commercial and digital printing, finishing, graphic design, data analytics, direct mail processing, and fulfillment services. Mittera's full-service approach connects data-driven revelations, bar-raising creative, and expertly printed materials to give our customers' brand recognition it deserves. Competitive compensation and robust benefits plans are offered. Benefits include: * Medical * Dental * Vision * Life and AD&D Policies * Short and Long-Term Disability * 401K with Company Match * Paid Time Off * Paid Volunteer Time Off * Location specific benefits should go here! Mittera is proud to be an equal opportunity workplace. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender identity, or Veteran status. We also consider qualified applicants regardless of criminal histories, consistent with legal requirements. All applicants must be 18 years of age or older. Visit us today at mittera.com or stop by and fill out an application at Mittera location near you!

Property Inspector Start Your Career in the Field - No Experience Needed Earn $50K-$75K! Responsibilities: • Canvass local neighborhoods to identify homes with old original windows and roofing • Talk with homeowners about the benefits of brand new impact windows & roofing • Schedule appointments for FREE inspections Qualifications: • No experience required (We'll Train) • Outgoing personality • Strong communication skills • Driven to achieve goals • Must have a car or a truck Compensation: • Salary, Commission & Bonus (Earn $50,000 to $75,000 per year) • 5-day work schedule • Full training provided • Career growth opportunities Apply Now! Send your phone number and updated resume. Qualified applicants will be contacted for a phone interview.

Property Inspector Start Your Career in the Field - No Experience Needed Earn $50K-$75K! Responsibilities: • Canvass neighborhoods to find old original windows, doors, and damage roofing • Schedule FREE estimate appointments for windows, doors, bathrooms and roofing • Work outdoors and engage directly with homeowners Qualifications: • Outgoing personality • Strong communication skills • Driven to achieve goals Compensation: • Salary, Commission & Bonus (Earn $50K to $75K per year) • 5-day work schedule • Full training provided • Career growth opportunities Apply Now! Send your phone number and updated resume. Qualified applicants will be contacted for a phone interview.