Inspector jobs in Saint Charles, MO - 143 jobs

Great job for Uber Drivers, Lyft, Door Dash, Uber Eats, Pizza delivery, etc. What Do Mortgage Field Service Contractors Do? By law, mortgage companies and banks are required to document the occupancy and physical condition of all mortgaged loans. To do this they send a Property Inspector to the physical property to take specific photos and to reasonably determine if the property is occupied or vacant. The property inspector then reports the general condition of the property using a mobile app. Mortgage Field Service Inspectors are Property Inspectors who: *Determine if a property is occupied or vacant. *Rate the property as Good, Fair, or Poor. *Take photos of the property using your smart cell phone. *Fill out a form on your cell phone using a downloadable app. *Answer multiple choice questions about the property condition. REQUIREMENTS: *Must be able to pass a criminal background check. *Must have dependable transportation (good gas mileage is a plus). *Must have a smartphone (Android or iPhone). *Must have a printer/scanner (or easy access to both). *Must a desktop/laptop or tablet to print forms. INCOME and ASSIGNMENTS: Income-based on area and volume. Most inspectors can complete several inspections an hour. Rural areas may pay more per inspection on average. The faster inspections are completed, the more inspections are provided. Based on 1099 contractor work. No resume required.

This is a Part-Time Lane Inspector Position. Opus is a world-leading vehicle inspection and intelligent vehicle support company that has been contributing to a safer and cleaner world since the company was founded in 1990. We take pride in helping make our world a safer and cleaner place. Duties and Responsibilities: Lane Inspector - Vehicle Emissions testing. You will play an important role in limiting the production of Emissions by identifying the polluting vehicles. As a lane inspector, YOU will be responsible for the following: * Perform emission inspection functions following established procedures, and enter and verify vehicle information with computer data. * Operate vehicles during the emissions system test and use exhaust analysis equipment. * Direct motorists in and out of the station, provide test results, instruct customers on next steps in the inspection process, and collect inspection fees. * Other job duties as assigned. No experience required; we will train you! Requirements: * Must be 18 years of age. * Valid and unrestricted driver's license. * Physically able to stand, bend, stoop, kneel, and balance unassisted for extended periods of time. * Physically able to lift, push, and pull up to 20 lbs on an occasional basis. * Basic computer skills. * Saturday availability required - (State & Program Specific) * Part-time hours requirement is between 20 - 30 hours a week. - (State & Program Specific) Qualifications: * Team player. * Excellent customer service skills. * Ability to work efficiently and multitask in a fast-paced, busy shop environment with a smile and positive attitude. * Work in an environment that includes vehicle exhaust fumes, noise, and heat. * Work in all weather conditions. * Work safely around operating motor vehicles. All offers of employment are contingent upon completing and meeting the criteria of a background check, drug screening, and I-9 verification.

A comprehensive program where entry level inspectors will learn in process and final inspection of all types of aircraft parts, the documentation of inspection records, identifying and controlling nonconforming material, and supporting Root Cause and Corrective Action. Program Training Includes: Inspect and/or layout parts, with precision measuring instruments Perform first article, in process, receiving, and final inspections of manufactured parts and assemblies Identify and acceptance parts that are conforming to required specifications Interpret blueprint and technical specifications related to manufactured parts Identify and control nonconforming material, and support Root Cause, and Corrective Actions Perform in process audits of parts in the manufacturing process Calibrate and maintain precision measuring tools Maintain and organize inspection records in company files Verify the accuracy of measurements documented on SPC data sheets Work with customer source inspectors Requirements: Applicant must be a U.S. Person Minimum High School education or equivalent Basic ability to read machined part drawings required Attention to detail and dedication for excellence A self-starter willing to learn and collaborate Preferred Requirements: Trade School or equivalent experience preferred Machining background preferred Knowledge of GD&T preferred Basic knowledge of proper inspection tools such as a micrometer and calipers preferred Company Profile: Patriot Machine, Inc. is a technologically advanced aerospace manufacturer headquartered in St. Charles, Missouri. We supply complex structural parts and assemblies made from aluminum, titanium and steel to America's largest aircraft manufacturers. Our culture of innovation and continuous improvement attracts skilled workers who are looking for a challenge. We offer opportunities to learn, grow and help shape the future of aerospace by applying innovative approaches to problem-solving. Patriot Machine is a woman-owned business currently consisting of over 190 employees and 277,000 square feet of manufacturing and office space. We recently expanded into a new advanced manufacturing facility with ample space for further growth. We provide employees the opportunity to work alongside industry experts at an ultramodern manufacturing company. Patriot Machine offers an excellent benefits package including health, dental, vision, life/disability, 401(k) with employer contributions, paid vacation and holidays.

Job Description POWER YOUR FUTURE! Every time you turn on a light switch, H-J is helping to deliver that power! The H-J Family of Companies is a growing and innovative manufacturer and distributor of electrical components for power distribution. Located in High Ridge, Missouri since 1969, H-J has built our company on the quality of our products and services. We are looking for individuals with the drive and desire to join our team and help us continue to grow. Summary: The Quality Control Inspector is an entry-level role with responsibility for supporting the Quality Manager and the quality team in maintaining and improving product quality. This role includes conducting inspections and tests on materials, ensuring compliance with quality standards, and contributing to corrective actions for continuous improvement. Essential Functions: Inspect and test incoming, in-process, and finished materials according to specifications through visual and measurement tests. Participate in corrective action activities to enhance overall quality. Perform line audits to ensure product conformance to standards. Document inspection and audit results in the appropriate systems. Complete full dimensional checks and reporting for sample parts. Review and understand the requirements of the Quality Management System. Follow procedures, work instructions, and reference materials to ensure consistent process quality. Provide feedback and suggestions for process and procedural improvements. Assist in material evaluation, including sorting and reworking materials. Stay updated on job knowledge through educational opportunities and reading relevant technical publications. Perform other duties as assigned. Non-Essential Functions: Opportunity to acquire an operator fork trucks license, or other material handling equipment, to remove and return components and/or finished goods from warehouse locations. Position Requirements: Must be 18yo or older. 1-3 years of quality control experience in a manufacturing environment preferred. Strong understanding of inspection techniques and the use of measurement equipment. Ability to read and interpret technical drawings and perform dimensional measurements to ensure products meet specifications. Effective communication skills and the ability to collaborate with others. Strong analytical and mathematical skills. Ability to work independently and manage time efficiently to complete projects on schedule. Willingness to learn and grow with increased responsibility. Shift Details 1st Shift is M-TH, 4 X 10-hour shifts, 6:30 am - 5:00 pm. All employees are expected to work overtime hours as needed. Overtime is typically twice a month on Fridays and are 8-hour shifts. We offer multiple shifts and a competitive benefits package, including medical, dental, vision, company provided life insurance, 401K, profit-sharing, paid holidays, paid vacation, employee events and tuition reimbursement for employees looking to grow with the company. Apply today at ******************** #LI-dni

Job Description This is a non exempt inspection position of moderate difficulty responsible for performing onsite housing inspections for the Housing Choice Voucher program in a manner that provides responsive customer service and complies with program requirements. Duties include scheduling appointments, performing inspections, contact with owners and clients, organizing large volumes of data, tracking different types of information and maintaining data on the computer system. This position involves an inspection caseload of 700-900 units annually. MINIMUM QUALIFICATIONS: Must have a High School Diploma or equivalent. Required knowledge, skills and abilities for this position would normally be gained through the equivalent of two (2) years at an accredited college or university in a related field and/or one (1) year experience and/or training in Building/Housing Inspection. Knowledge of basic residential building and/or maintenance terms and applications of those terms. Ability to organize and manage large volumes of information in various formats, skill in the use of a personal computer, communicate clearly both verbally and in writing, interact with owners and clients in a courteous professional manner, physical ability to visually inspect building structures, sometimes involving outside work in inclement weather, climbing, working in damp or dirty environments. Ability to conduct all assigned onsite inspections according to requirements of HUD Housing Quality Standards (HQS) and in accordance to the agency's policies and procedures; assigned inspections to include initial inspections, annual inspections, complaint inspections and follow-up inspections. Ability to conduct inspections in a manner that properly applies SLHA and HUD HQS requirements 95% of the time; schedules daily inspection appointments by reviewing monthly inspection notifications and prioritizing inspections according to due dates, organizing routes efficiently according to location and provide HQS Supervisor with daily routing sheets. Ability to complete all inspection reports and notifies parties of results of inspection noting HQS deficiencies within twenty-four (24) business hours of inspection; accurately enters inspection data in the SLHA computer system in a manner that produces an error rate of 2% or less. Must have and maintain a current driver's license and be insurable under the Authority's automobile insurance. BENEFITS Your total compensation is more than the dollars you receive in your paycheck. In addition to a competitive salary, SLHA also offers: • Medical Plans • Dental Plan • Vision Plan • Life Insurance • Short-Term Disability • Long-Term Disability • Flexible Spending Accounts for medical or dependent care • Paid Time Off: Vacation, Sick, Personal and Holidays • 401a contribution equal to 12.7% of annual salary SLHA is a qualifying employer for the Public Service Loan Forgiveness Program.

SA Recycling, a leader in the metals recycling and processing industry, is actively looking for an experienced and detail-oriented Inspector. As an Inspector you will be the first point of contact with our customers as they deliver scrap materials into the yard. Your primary responsibilities will be inspecting and documenting customer loads and directing traffic to the proper collection site within the yard. This position will work outside in varying weather conditions, and SA Recycling strictly adheres to all Metals Recycling Business Health, Safety, and Environmental standards. Working hours are from 6:00 am to 4:00 pm Monday through Friday, and from 8:00 am to noon on Saturday. SA Recycling offers: Competitive Pay Eligible for Safety and Profitability Bonuses Comprehensive benefits including affordable medical options, dental and vision care 401k with a Company Match Weekly Pay Referral Incentives Company provided uniforms and PPE Responsibilities of an Inspector: Maintain a broad and working knowledge of different types of ferrous and non-ferrous materials. Identify and grade inbound scrap and reject unacceptable items. Direct customer traffic to the appropriate collection sites. Inputs customer and scrap information into SA Recycling's customer database and completes inspection tickets. Observes all customer drop-offs for unacceptable items. Performs other general laborer duties as directed. Qualifications of an Inspector: High School diploma, GED Certification, or equivalent work experience. 1-year previous general labor in the scrap metal or construction industries preferred. Ability to use a computer tablet. Bi-lingual (English and Spanish) a plus. Ability to carry out instructions provided in written, oral, or diagrammatic form. Ability to learn new tasks as assigned required. PLEASE NOTE: The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all responsibilities, duties and skills required. An offer of employment by SA Recycling is contingent on the satisfactory completion of a post-offer drug screen, physical exam, and background check with a credit check (if position specified). All US applicants must be 18 years of age or older.

SHAPING A WORLD OF TRUST! Global Staffing Services is a Recruiting Processing Organization, we are recruiting candidates through the US for our client who is a business to business to society company. They are dedicated to building trust between companies, public authorities and consumers. Our client offers superior services and decisive and actionable results. Join as an Independent Contractor by leaving your mark and shaping a world of trust. Our client is hired by banks, dealerships, leasing companies and others to performs field inspections and verifications throughout the United States. Their passion is to reduce clients' risk and our independent contractors contribute to this success! As an Independent Contractor (1099) you can perform multiple contracts in a day. Contracts start at $40 and go up from there, with potential to earn more depending on your availability to schedule and accept contracts. Along with other incentives Contract Requirements Include: Traveling distances do vary depending on your location. You will conduct Automotive inspections on physical inventories. Utilizing proprietary software to complete those reports. Identifying equipment, locating Serial/VIN numbers and documenting changes and or damages. Reconcile any missing vehicles and updating records. Then submitting completed reports within a given time frame. Contractor Skills and Qualifications: Must be able to computers and mobile applications on a smartphone or tablet. Flexible schedule and available during business hours. Monday-Friday 7-6pm Reliable transportation, a valid driver's license, High School Diploma/GED and a smart phone and must have Automotive experience. This is a must have, this can be from prior Auto Inspectors, Insurance Adjustors, Mechanics, etc any field where you would need to know how to identity or determine if there is damage. Professional business appearance, demeanor, and good communication skills. Take online certifications to become familiarized with our client's expectations. and to complete the onboarding process. Transferable Experience: Automatic Mechanic, Vehicle Inspector, Insurance Adjuster, Auto Body, etc Job Types: Full-time, Part-time, Contract Work Location: A given Radius in your closest location (On the Road) Job Types: Contract, Part-time, Full-time Salary: $40.00 - $270.00 per day Benefits: Flexible schedule Day range: Monday to Friday No weekends Shift: 8 hour shift Day shift Education: High school or equivalent (Required) License/Certification: Driver's License (Required) Willingness to travel: 75% (Required) Work Location: On the road Compensation: $40.00 - $270.00 per day Global Staffing Service's objective is to provide highly qualified contract, contract-to-hire and direct-hire staff to our clients. We understand the technical requirements of the positions you need to staff and the importance of delivering a cost-effective solution in a timely manner. We custom-tailor a candidate search based on your specific needs. We will advise you on the ideal candidate profile and compensation package to attract the right people. We recruit nationwide, check references and mediate negotiations. Our particular focus includes but not limited to: (in no particular order) Executives Outside Sales Professionals Inside Sales Professionals Regional Managers Area Managers IT Professionals Finance Professionals Engineering Professionals Manufacturing Professionals Distribution Health Services We currently have over 500 positions available. Although this is a moving target, it constitutes the average number of openings at any given time.

Job Description At Anodyne Surgical, we don't just make ophthalmic medical devices - we make a difference in the lives of patients around the world. Every product we build plays a part in someone's vision and well-being, and quality is the heartbeat of everything we do. We're looking for a Quality Control Inspector who takes pride in precision and wants to be part of a team where their work matters. In this role, you won't just check boxes - you'll help ensure that each product meets the highest standards for safety, reliability, and care. You'll be a key player in our commitment to excellence. What You'll Do Every Day Utilize microscopes, measurement tools, and visual inspection to uphold our rigorous standards. Perform precise product and label inspections to ensure alignment with design specs, regulatory standards, and internal quality benchmarks. Accurately document results, reflecting a high level of detail and ownership. Consistently meet inspection timelines without compromising quality. Collaborate cross-functionally to drive quality initiatives and continuous improvement. Complies with all relevant SOP's and Work Instructions and properly documents activities when necessary. Maintain clean, orderly, and compliant workspaces, particularly in controlled environments. Adhere to gowning and environmental protocols that support product cleanliness and patient safety. Take on other tasks as needed - we're a team, and we support each other. What We're Looking For 2+ years of experience in Quality Control, ideally in a regulated industry like medical devices. Working knowledge of FDA, cGMP, and ISO quality systems. Ability to interpret technical drawings and specs. Bonus if you're familiar with GD&T and inspection KPIs. Strong analytical mindset with high accuracy and problem-solving skills. Comfortable using basic math and computer systems for data entry and review. What You'll Get Schedule: Monday-Friday, 6:00 AM-2:30 PM (occasional overtime). Pay: $20-$25/hour, based on your experience and qualifications. Work Environment: Clean, comfortable, and temperature-controlled. Benefits: Medical, dental, and vision insurance 401(k) retirement plan 11 paid holidays Accrued PTO based on hours worked- averages to be 80 hours per year. Why Anodyne Surgical? We're a privately held, mid-sized manufacturer located in O'Fallon, MO, near I-64 and Highway K. Our specialty is producing high-quality, single-use ophthalmic needles used in surgeries like cataract removal and LASIK. What sets us apart? A culture that values craftsmanship, teamwork, and continuous improvement. We invest in our people and promote from within because we know our success starts with our team. Reach out to jhercules@anodynesurgical to set up a tour and to meet with our team today!

Job Details Division: Advantage Metals Recycling LLC Other Available Locations: Missouri; Illinois Welcome to Nucor, where our unique culture sets us apart. Joining Nucor means becoming part of North America's largest steel and steel products manufacturer, offering unmatched career opportunities and stability. We are known for our innovative sustainability practices and are the continent's largest recycler. Our vibrant culture, built on personal connections and teamwork, empowers every team member with the freedom to innovate and contribute to our collective success. Experience a workplace where safety, efficiency, and meaningful personal connections define every day, enriching both our teammates and the communities we serve. Nucor supports its teammates with top-tier benefits like Medical, Dental, Vision, and Disability Insurance, 401K and Roth accounts, Profit sharing, Pay-for-performance bonuses, Paid parental leave, Tuition reimbursement, Stock program, Scholarships and more. Basic Job Functions: Safety is the most important part of all jobs within Nucor; therefore, candidates must be able to demonstrate the ability to initiate, lead, and uphold safety policies, practices, procedures, and housekeeping standards at all times. Assist and direct customers to proper location to unload materials Inspect for the existence of flammable, radioactive, hazardous, and/or leaded materials. Inspect materials for liquids, non-metallic and all other posted or non-posted materials that are non-acceptable (i.e., propane tanks, PCBs, batteries, etc.) Ensure that any materials not allowed are not left on Company property Remove and properly store any items or material occasionally General duties involving physical handling of materials, supplies, etc. Serve as primary back up for Scale Operator role Assist others as needed Other duties as assigned Minimum Qualifications: Ability to work in a fast-paced, non-stop environment. Minimum of 1 year previous experience in general labor and/or customer service Ability to understand and carry out written and oral instructions. Ability to interact with a diverse customer base. Ability to work standing or walking for up to 12 hours per day. Ability to greet visitors, direct truck, and peddler traffic to proper locations for processing. Ability to meet attendance schedule with dependability and consistency. 5 day work week-Mon-Fri 6:00am - 4:00pm, schedule could fluxuate to include overtime, and or Saturdays depending on business needs. Flexible to work off hours, weekends, holidays in an industrial environment which includes being outdoors in all weather conditions. Preferences: Bilingual preferred Detailed Selection Criteria: Complete work history is required to be considered for this position. Include the employer's name, dates of employment, job title and the detailed responsibilities for the position held. Any gap in work history must be reflected and include the dates. Nucor is an Equal Opportunity/Affirmative Action Employer - M/F/Disabled/Vets - and a drug - free workplace

at Freedom Forever Pay Range $21-$24/hr. + Benefits! • Medical Insurance • Dental Insurance • Vision Care Insurance • $50K Life Insurance • 401K • Medical Reimbursement Accounts (HSA & FSA) • Employee Assistance Program • Paid Time-Off Competitive Hourly Pay + Health, Vision and Dental Benefits Position Summary The Inspections Technician will be responsible for inspecting installations and meeting with inspectors, ensuring installations are to code. Job Duties/ Responsibilities Review pictures and gather all necessary parts to complete inspection on site Sit on inspections that have zero to little clean up work needed Verifying labeling and placards are up to code for inspection Call AHJ to confirm inspection time frame in the AM Set up and tie off ladders for the city/county inspectors Rivet placards Open electrical panels & junction boxes so the inspector can observe inside Maintaining the safety of themselves and others by adhering to all written and verbal instructions, promptly reporting and/or correcting all hazards or unsafe conditions, questioning nonstandard operations or environmental factors that may involve unmitigated hazards, and providing feedback to Field Manager on all safety issues Take notes for corrections and notify Field Manager of any issues or updates Keep inspection vehicle stocked with the necessary materials Service solar panel systems when necessary Perform other duties as assigned Qualification Requirements High school diploma or general education degree (GED) Must have a minimum of 1+ years of experience Must have electrical and roof racking experience? (entry level role?) Electrical apprentice card is preferred Familiarity with electrical plans and field layouts Strong interpersonal and human relations Strong analytical and creative problem-solving skills Good motivation with an attention to productivity, detail and safety Able to work safety with heights on ladders and in confined areas Be able to lift, pull and push materials and equipment to complete assigned job tasks Must be willing and able to climb ladders, stairs, work on rooftops and able to work on your feet for long periods of time Be able to lift 50 pounds of weight frequently throughout assigned workday Attention to detail Excellent written and verbal communication skills Excellent customer service skills Regular, reliable and predictable attendance Ability to work well with others in a collaborative team environment Ability to work in extreme environments (example: hot sun, cold, rain, crawl spaces, etc.) Maintain a clean and safe working environment Must have a valid state driver's license Must have a clean driving record Physical Demands and Abilities Use their hands to handle, control, or feel objects, tools, or controls Stand for long periods of time Walk or run for long periods of time Climb ladders, scaffolds, or poles Kneel, stoop, crouch, or crawl Bend, stretch, twist, or reach out Repeat the same movements See details of objects that are less than a few feet away Determine the distance between objects Use fingers to grasp, move, or assemble very small objects Make quick, precise adjustments to machine controls Hold the arm and hand in one position or hold the hand steady while moving the arm Use one or two hands to grasp, move, or assemble objects Understand the speech of another person Use muscles to lift, push, pull, or carry heavy objects See differences between colors, shades, and brightness Move two or more limbs together (for example, two arms, two legs, or one leg and one arm) while remaining in place Use stomach and lower back muscles to support the body for long periods without getting tired Keep or regain the body's balance or stay upright when in an unstable position React quickly using hands, fingers, or feet While looking forward, see objects or movements that are off to the side lift up to 50+ pounds Freedom Forever is an equal opportunity employer. In accordance with applicable law, we prohibit discrimination against any applicant or employee based on any legally-recognized basis, including, but not limited to: veteran status, uniformed service member status, race, color, religion, sex, sexual orientation, gender identity, age (40 and over), pregnancy (including childbirth, lactation and related medical conditions), national origin or ancestry, citizenship status, physical or mental disability, genetic information (including testing and characteristics) or any other consideration protected by federal, state or local law. Our commitment to equal opportunity employment applies to all persons involved in our operations and prohibits unlawful discrimination by any employee, including supervisors and co-workers. Employees of Freedom Forever must submit to a criminal history check, MVR check and a 9-panel drug screen that includes the following: Amphetamines, Cocaine Metabolites, Opiates, Phencyclidine (PCP), Barbiturates, Benzodiazepines, Methadone, Methaqualone, Propoxyphene. Job based in Mascoutah, IL area not seeking remote employees

Join the 125-year legacy of Potter Electric Signal Co. Potter has been a part of the St. Louis community since 1898 and we are very proud of our rich history in the fire and life safety industry. Potter's mission is to be the "Symbol of Protection" for fire and life safety solutions worldwide by combining the latest technology in fire protection with the dedicated manpower for which we have been known for over one hundred years. Our vision is to provide industry leading quality solutions, products and services for the protection of life, property and the environment. With unwavering dedication to our customers, Potter looks to continue as the industry standard in both product and service with increased focus on international expansion. Each employee at Potter takes great pride in knowing that every product we assemble, service, and sell is for the purpose of saving lives around the world. We strive to provide employment opportunities to those individuals who are performance driven, team players, take pride in their work, and are enthusiastic and passionate about their job. Potter Global Technologies and our private equity firm, KKR, value our employees and all that they do. KKR offers a unique benefit and opportunity for all employees to participate in an ownership program of Potter Global Technologies. Being a co-owner allows each employee to play a more direct role in the business itself and reap the financial benefits of the Company's success. Summary of the Position The Quality Control Inspector is responsible for maintaining product quality. This role performs t ests and inspects products, processes, and procedures at various stages of production process to compile and evaluate statistical data to determine and maintain quality and reliability of products. Primary Responsibilities Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Support in-process inspection of all products. Accurately record test data, using Epicor, Microsoft Office, and other computer programs. Communicate and coordinate findings with Quality Management and Quality Engineering. Understand customer expectations of and needs from all product. Prepare data for further analysis, as needed. Attend Meetings on the factory floor. Secondary Responsibilities Associate degree in technical field, plus two years of related experience in Quality Control, or combination of relevant education, experience, and training. Proven and successful track record working in a similar role, highly desired. ISO 9001 or other standards experience (ex. IATF 16949, ISO 17025, VDA) highly desired. Experience in Fire, Automotive or Aerospace industry, a plus. Quality certification, such as from ASQ, advantageous. Required Skills/Abilities Ability to multitask with attention to detail in a fast-paced, dynamic environment. Ability to excel in ambiguous circumstances or situations. Ability to effectively communicate with multi-functional partners over a wide range of subject areas. Knowledge of manufacturing environment. People skills, ability to motivate, engage and coach all levels of employees. Qualifications Work Environment/Physical Demands/Travel This job operates in a warehouse/manufacturing setting where hand tools and parts are used to assemble products, such as pliers, screwdrivers, box cutters, power tools, screws, automatic tape dispensers. This position must be able to lift 25 pounds at times. Must be able to access and navigate each department at the organization's facilities. Preferred Qualifications Experience in Quality Control Knowledge and experience in manufacturing Proven and successful track record working in a similar role. PCB troubleshooting experience. ISO 9001 or other standards experience (ex. IATF 16949, ISO 17025, VDA). Experience in Fire, Automotive or Aerospace industry. Associate degree in technical field. This is a full-time position, on-site at the manufacturing facility. The weekly hours worked are 40 hours per week. There may be a need for overtime work. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of an employee for this job. Activities, duties and responsibilities may change at any time with or without notice.

Acuren is currently recruiting for a Visual Inspector/CWI for operations in South Roxana, IL. Responsibilities At the direction of client, perform visual and non-destructive examination of static and dynamic pressure retaining equipment in accordance with American Petroleum Institute (API) standards and the American Society of Mechanical Engineers (ASME) Submit to client technically accurate reports documenting equipment condition Provide client with technical recommendations for the repair, re-rate, replacement, and/or alteration of plant equipment, as required for safe operation within stated operating parameters for durations specified by client Provide technical input to client as required for welding and metallurgical issues Provide technical guidance, on a application of non-destructive examination techniques and procedures Fully comply with all Acuren and client safe work practices and actively participate in all site safety initiatives Willingness to travel if needed Requirements CWI Certification 5 - 10 years' experience or 2+ years on site experience Additional API a plus In-depth working knowledge of CWI and ASME standards Experience working in direct support of petrochemical facility engineers Benefits Competitive salary Medical, dental, vision, and supplemental insurance 401K Plan Paid Holidays Paid Time Off Pay Transparency: As per applicable state law the job posting pay range is $34.75-$57.91/hr depending on experience and applicable certifications. Company Overview Acuren is a trusted, single source provider of technology-enabled asset protection solutions used to evaluate the structural integrity of critical energy, industrial and public infrastructures. Committed to delivering a Higher Level of Reliability , Acuren provides an unrivaled spectrum of capabilities including inspection, traditional and advanced NDE/NDT, failure analysis, rope access, materials engineering, field engineering, reliability engineering, drones, robotics, V-Deck and condition-based monitoring services. Our work is critical to the integrity and safety of industrial firms, including petroleum refinery, pipeline, power generation, pulp & paper, mining, pharmaceutical, aerospace and automotive industries. Acuren employs over 4,000 dedicated professionals supporting the mechanical integrity and inspection programs of the world's largest industrial segments. Acuren is a market leader. Our formula for success is straightforward: be capable locally, with certified and well-equipped personnel supported by trained, experienced leaders. Continuing to build on a strong heritage of safety, quality and professionalism, Acuren strives to maintain incident free work environments, pursues advanced technical developments, and supports reliability programs that are valued by clients and employees. #LI-BE1

Our 2nd shift schedule is Monday-Thursday, 3pm-1am. The shift incentive includes a 10% -15% premium, paid lunch, and 3 day weekends. West Star is the fastest growing maintenance repair organization in the industry and we recognize this is the result of our talented team of trusted employees working together to deliver customer service excellence. We are committed to providing our employees with personal and professional growth opportunities while fostering a culture of respect and well-being with a small company feel. When you join our team we don't think you should have to wait for your benefits to kick in. That's why when you start, they start with you! This includes medical, dental, 401K match, time off accruals, weekly pay days and much more. We don't want you to live to work, we want you to work and live. What you can expect as a Quality Control Inspector at West Star: The Quality Control Inspector maintains West Star Aviation's quality standards in accordance with the West Star Repair Station/Quality Control Manual and the Federal Aviation Regulations. This will be accomplished by working with Aircraft Technicians, Program Managers, Team Leaders, Quality Control and Quality Assurance Inspectors. You will be ESSENTIAL to many FUNCTIONS including: Prior avionics experience is required. Maintain West Star Aviation's quality standards by inspecting technician's work, performing “ok to close”, and auditing. Ensure proper sign-offs in Corridor as part of the inspection process. Participate in daily review meetings. Assist with Airframe Inspections Following up with all departments to get steps signed off, inspected, and closed so airframe squawks can be completed. Help manage Equipment Removal and Installation Log. Assist QA Department with log research issues to help clear items that are in question. Daily contact at aircraft with Team Leaders to ensure quality standards are met. Maintain customer oriented work habits. Effectively and clearly communicate (i.e., speak, write, read) in English Any other job-related duties as assigned by supervisor or management.

As a turnkey supplier with extensive capabilities, the proper inspection of manufactured aerospace parts and ground support equipment is significant to our success, and as a Quality Control Inspector at Seyer Industries, you will make a difference! We are looking for people with high integrity to inspect aerospace parts using the best inspection methods including PCMMs, CMMs, and/or other manual methods. WE OFFER GREAT BENEFITS! * Monthly Manufacturing Performance Incentives with the opportunity to earn up to $550 per month. * Weekly payroll * Start accruing vacation from day one! Accrued each pay period, you will receive 96 hours of vacation in your first year. That increases to over three weeks of vacation (136 hours) after three years. * Anniversary paid day off awarded each year. * Nine (9) paid holidays including the day after Thanksgiving, Christmas Eve, and New Year's Eve. * Complete benefits package including Health, Dental, Vision, and Voluntary Life. * Benefits Paid 100% by Seyer Industries: HealthiestYou (Teledoc services), Basic Life Insurance, Accidental Death and Dismemberment, Employer Assistance Program (EAP), Short-term and Long-term disability. * 401(k) with employer match - Seyer Industries will match 100% of the first 3% of pay you contribute to the plan; plus 50% of next 2% contributed. Working at Seyer Industries isn't like working at other manufacturing companies. Our commitment to employee engagement, collaborative spirit, emphasis on achieving results, dedication to continuous improvement, and high expectations offer a different culture. At Seyer Industries, our annual average turnover rate is mind-blowingly low at 6.37% (the industry average is 39.9%). And there is a good reason why our average tenure is 8.98 years - people that come to work at Seyer Industries end up staying. Make that change. Come grow with us. Find your home with Seyer Industries. NOT INTO WORKING 9 TO 5? We have a work shift and schedule for you! Our 1st shift offers four different work schedules. ARE YOU A GOOD FIT? We are looking for someone with excellent functional and technical skills with CMMs and PCMMs, and knowledge of manual inspection methods, such as micrometers, calipers, height gages, bore micrometers, and optical comparators. If you have experience inspecting precision parts and using FARO arms, CMMs, PC-DMIS, or Verisurf, we are interested in meeting you. Do you take pride in your attention to detail, good judgment, integrity, and dependable attendance? We would like to reward you for that. Apply now and join our team! ABOUT SEYER INDUSTRIES Founded in 1957, Seyer Industries is a small business located in St. Peters, Missouri, specializing in high-complexity machined parts and assemblies for the aerospace and maritime industries. Seyer is a turnkey supplier with extensive capabilities, including CNC machining, design engineering, mechanical and electrical assembly, painting, kitting, welding, and NADCAP-certified penetrant and magnetic particle inspection. Our team is comprised of individuals proudly committed to the objectives of quality and productivity. All job offers are contingent on the successful completion of a pre-employment drug test and background check. We are an Equal Opportunity Employer and do not discriminate. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, or national origin. EOE AA M/F/Vet/Disability

This is a Full Time Lane Inspector Position. Opus is a world-leading vehicle inspection and intelligent vehicle support company that has been contributing to a safer and cleaner world since the company was founded in 1990. We take pride in helping make our world a safer and cleaner place. Duties and Responsibilities: Lane Inspector - Vehicle Emissions testing. You will play an important role in limiting the production of Emissions by identifying the polluting vehicles. As a lane inspector, YOU will be responsible for the following: * Perform emission inspection functions following established procedures, and enter and verify vehicle information with computer data. * Operate vehicles during the emissions system test and use exhaust analysis equipment. * Direct motorists in and out of the station, provide test results, instruct customers on next steps in the inspection process, and collect inspection fees. * Other job duties as assigned. No experience required; we will train you! Requirements: * Must be 18 years of age. * Valid and unrestricted driver's license. * Physically able to stand, bend, stoop, kneel, and balance unassisted for extended periods of time. * Physically able to lift, push, and pull up to 20 lbs on an occasional basis. * Basic computer skills. * Full-time hours requirement is 40 hours a week. Qualifications: * Team player. * Excellent customer service skills. * Ability to work efficiently and multitask in a fast-paced, busy shop environment with a smile and positive attitude. * Work in an environment that includes vehicle exhaust fumes, noise, and heat. * Work in all weather conditions. * Work safely around operating motor vehicles. All offers of employment are contingent upon completing and meeting the criteria of a background check, drug screening, and I-9 verification.

Responsible for the in process and final inspection of manufactured parts, for the documentation of inspection records, for identifying and controlling nonconforming material, and for supporting Root Cause and Corrective Action. Responsibilities: Inspect and/or lay out parts, with precision measuring instruments, on surface plates using blocks, parallels, and clamps Perform first article, in process, receiving, and final inspections of manufactured parts and assemblies Identify and acceptance stamp parts that are conforming to required specifications Interpret blueprint and technical specifications related to manufactured parts Identify and control nonconforming material, and support Root Cause, and Corrective Actions Perform in process audits of parts in the manufacturing process Calibrate and maintain precision measuring tools Maintain and organize inspection records in company files Verify the accuracy of measurements documented on SPC data sheets Work with customer source inspectors Requirements: Minimum High School education or equivalent Trade School or equivalent experience preferred Must be a U.S. Person Company Profile: Patriot Machine, Inc. is a technologically advanced aerospace manufacturer headquartered in St. Charles, Missouri. We supply complex structural parts and assemblies made from aluminum, titanium and steel to America's largest aircraft manufacturers. Our culture of innovation and continuous improvement attracts skilled workers who are looking for a challenge. We offer opportunities to learn, grow and help shape the future of aerospace by applying innovative approaches to problem-solving. Patriot Machine is a woman-owned business currently consisting of over 190 employees and 277,000 square feet of manufacturing and office space. We recently expanded into a new advanced manufacturing facility with ample space for further growth. We provide employees the opportunity to work alongside industry experts at an ultramodern manufacturing company. Patriot Machine offers an excellent benefits package including health, dental, vision, life/disability, 401(k) with employer contributions, paid vacation and holidays.

Job Description POWER YOUR FUTURE! Every time you turn on a light switch, H-J is helping to deliver that power! The H-J Family of Companies is a growing and innovative manufacturer and distributor of electrical components for power distribution. Located in High Ridge, Missouri since 1969, H-J has built our company on the quality of our products and services. We are looking for individuals with the drive and desire to join our team and help us continue to grow. Summary: Responsible for assisting the quality manager and quality team in the management of the product quality. Summary: The Quality Control Inspector is an entry-level role with responsibility for supporting the Quality Manager and the quality team in maintaining and improving product quality. This role includes conducting inspections and tests on materials, ensuring compliance with quality standards, and contributing to corrective actions for continuous improvement. Essential Functions: Inspect and test incoming, in-process, and finished materials according to specifications through visual and measurement tests. Participate in corrective action activities to enhance overall quality. Perform line audits to ensure product conformance to standards. Document inspection and audit results in the appropriate systems. Complete full dimensional checks and reporting for sample parts. Review and understand the requirements of the Quality Management System. Follow procedures, work instructions, and reference materials to ensure consistent process quality. Provide feedback and suggestions for process and procedural improvements. Assist in material evaluation, including sorting and reworking materials. Stay updated on job knowledge through educational opportunities and reading relevant technical publications. Perform other duties as assigned. Non-Essential Functions: Opportunity to acquire an operator fork trucks license, or other material handling equipment, to remove and return components and/or finished goods from warehouse locations. Position Requirements: Must be 18yo or older. 1-3 years of quality control experience in a manufacturing environment preferred. Strong understanding of inspection techniques and the use of measurement equipment. Ability to read and interpret technical drawings and perform dimensional measurements to ensure products meet specifications. Effective communication skills and the ability to collaborate with others. Strong analytical and mathematical skills. Ability to work independently and manage time efficiently to complete projects on schedule. Willingness to learn and grow with increased responsibility. Physical Requirements Ability to stand for the majority of the shift. Manual work requiring frequent sitting, bending, stooping, squatting, standing, pushing, pulling, lifting, and walking. Must be able to lift up to 50 pounds as needed. Shift Details 2nd Shift is M-TH, 4X10hr shifts, 4:45 pm - 3:15 am. All employees are expected to work overtime hours as needed. Overtime is typically twice a month on Fridays and are 8-hour shifts. We offer multiple shifts and a competitive benefits package, including medical, dental, vision, company provided life insurance, 401K, profit-sharing, paid holidays, paid vacation, employee events and tuition reimbursement for employees looking to grow with the company. Apply today at ******************** #LI-dni

at Freedom Forever Join an established and innovative company in the fast-growing solar industry and enjoy strong pay rate + benefits + advancement opportunities! Do you have proven skills and experience completing solar installations and motivating other people to do their best work? If this sounds like you, and you want an opportunity where your commitment to quality and productivity will be rewarded, please keep reading! We're Freedom Forever, a fast-growing solar company known for innovation and quality, and we're looking for people who want an opportunity to build a career with us as a Inspection Technician! The Inspections Technician will be responsible for inspecting installations and meeting with inspectors to ensure installations are to code. Pay Range: $20 to $24/hr. We offer an extensive benefits package which includes: Medical Insurance Dental Insurance Vision Care Insurance $50K Life Insurance 401K Medical Reimbursement Accounts (HSA & FSA) Employee Assistance Program Paid Time-Off POSITION SUMMARY: The Inspections Technician will be responsible for inspecting installations and meeting with inspectors to ensure installations are to code. ESSENTIAL JOB DUTIES AND RESPONSIBILITIES: Review pictures and gather all necessary parts to complete inspection on site Sit on inspections that have zero to little cleanup work needed Verifying labeling and placards are up to code for inspection Call AHJ to confirm the inspection time frame in the AM Set up and tie off ladders for the city/county inspectors Rivet placards Open electrical panels & junction boxes so the inspector can observe inside Maintaining the safety of themselves and others by adhering to all written and verbal instructions, promptly reporting and/or correcting all hazards or unsafe conditions, questioning nonstandard operations or environmental factors that may involve unmitigated hazards, and providing feedback to Branch Manager on all safety issues Take notes for corrections and notify Branch Manager of any issues or updates Keep inspection vehicle stocked with the necessary materials Service solar panel systems when necessary Perform other duties as assigned QUALIFICATION REQUIREMENTS: Education & Certifications: High School Graduate or GED Experience: Preferred 1+ years of experience from relatable field Knowledge, Skills & Abilities: Minimum licensing requirement to legally perform the job descriptions in each market Familiarity with electrical plans and field layouts Strong interpersonal and human relations Strong analytical and creative problem-solving skills Good motivation with attention to productivity, detail and safety Able to work safely with heights on ladders and in confined areas Be able to lift, pull and push materials and equipment to complete assigned job tasks Must be willing and able to climb ladders, stairs, work on rooftops and able to work on your feet for long periods of time Be able to lift 50 pounds of weight frequently throughout assigned workday Attention to detail Excellent written and verbal communication skills Excellent customer service skills Regular, reliable and predictable attendance Ability to work well with others in a collaborative team environment Ability to work in extreme environments (example: hot sun, cold, rain, crawl spaces, etc.) Maintain a clean and safe working environment Must have a valid state driver's license Must have a clean driving record TRAVEL REQUIREMENTS (Employee is required to travel for business purposes, not including commute to and from work.) If required to travel, must have a valid Driver's License/Insurance and the ability to drive a personal vehicle to different sites. Freedom Forever is an equal opportunity employer. In accordance with applicable law, we prohibit discrimination against any applicant or employee based on any legally-recognized basis, including, but not limited to: veteran status, uniformed service member status, race, color, religion, sex, sexual orientation, gender identity, age (40 and over), pregnancy (including childbirth, lactation and related medical conditions), national origin or ancestry, citizenship status, physical or mental disability, genetic information (including testing and characteristics) or any other consideration protected by federal, state or local law. Our commitment to equal opportunity employment applies to all persons involved in our operations and prohibits unlawful discrimination by any employee, including supervisors and co-workers. Employees of Freedom Forever must submit to a criminal history check, MVR check and a 9-panel drug screen that includes the following: Amphetamines, Cocaine Metabolites, Opiates, Phencyclidine (PCP), Barbiturates, Benzodiazepines, Methadone, Methaqualone, Propoxyphene. Job based in Illinois not seeking remote employment

This is an hourly, non-exempt position that will oversee all assigned production work scopes to ensure all work accomplished is done in accordance with the West Star Aviation Repair Station Manual and the Federal Aviation Regulations. This will be accomplished while working with Program Managers, Leads and Technicians. The job includes varying duties each day, but include performing work order surveillance and creating maintenance log entries for all maintenance and modifications to aircraft assigned, completing all FAA approval and return to service paperwork as required to support production and our customers, assisting Engineering personnel in assuring alterations and repairs are accomplished in accordance with the Federal Aviation Regulations and ensuring quality control and release of aircraft meet the West Star Aviation Repair Station Manual and FAA requirements. Essential Job Functions: Inspect work of aircraft mechanics performing maintenance, modification, or repair and overhaul of aircraft and aircraft mechanical systems to ensure compliance with Repair Station and FAA standards, procedures and regulations. Prepare and maintain detailed repair, inspection, investigation, and certification records and reports. Inspect new, repaired, or modified aircraft to identify damage or defects and to assess airworthiness and conformance to standards, using checklists, hand tools, and test instruments. Produce, examine, research and review maintenance records and flight logs to determine if service and maintenance checks and overhauls were performed at prescribed intervals. Oversee, conduct and document flight tests to test equipment, instruments, and systems under a variety of conditions in coordination with Maintenance Technicians. Ensure, document, and track the competency of persons operating, installing, and repairing aircraft equipment according to Repair Station procedures and FAA regulations. Conduct logbook research and other duties related to pre-buy activities. Release aircraft to return aircraft to service. Job Requirements: EDUCATION High school diploma or equivalent Associates degree in Aviation Technology strongly preferred FAA Airframe and Powerplant license required Inspection Authorization (IA) rating is a plus EXPERIENCE 8 years progressive experience as an aircraft maintenance technician with sign-off authority 4 years aircraft inspection experience with at least 1-year return to service authority Strong knowledge of FAA requirements, work orders, and the customer billing process The ability to read electrical and structural prints is recommended Minimum Requirement A valid drivers license approved for airline travel and/or a valid passport is ideal, but not required