Inspector jobs in Spokane Valley, WA - 27 jobs

The Quality Inspector is responsible for conducting origination inspection of parts and supplies, ensuring product quality through assessment and analysis using specific procedural standards. **Responsibilities** + Follow standardized procedures to perform first part, final, and receiving inspections on a wide variety of parts and assemblies. + Utilize standard mechanical and electrical instruments, functional gauges, and test rigs. + Accurately compare products to engineering drawings/specifications, purchase orders, and inspection plans using common manual inspection equipment. + Identify and document non-conformances. + Provide constructive feedback for quality improvement. + Work under direct supervision and follow given instructions and techniques. **Essential Skills** + Quality assurance, inspection, quality control, and quality inspection experience. + Experience using meteorology equipment such as calipers, height gage, surface plate, protractor, radius gauge, micrometer, and dial indicator. + Proficient use of basic meteorology equipment including calipers, height gage, surface plate, protractor, radius gauge, micrometer, and dial indicator. + Ability to speak effectively and interact with other team members. + Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. + Knowledge of and familiarity with Microsoft Office products and ERP manufacturing software. + Basic computer tasks proficiency (MS Windows, Office, ERP Software). + One (1) year of quality inspection experience or equivalent specialized training. **Additional Skills & Qualifications** + QI experience in a metal fabrication environment is preferred. + Working knowledge of GD&T (Geometric Dimensioning and Tolerancing) is desired. + Inspection skills with FARO Arm and Programmable CMM are desired. + Experience with measuring tools (thickness gauges, micrometers, calipers) and hand tools. + Ability to lift up to 25lbs. **Why Work Here?** Eligible for comprehensive insurance benefits starting the first month after 30 days, including a choice of two health insurance plans, employer-paid dental insurance, life insurance, AD&D, long-term disability plans, and vision insurance. Additional life insurance, accident insurance, and critical illness insurance are available. Federal health and dependent care savings accounts (FSA) are offered. After 6 months, employees are eligible for a 401(k) plan with employer match and tuition reimbursement. PTO accrual begins with 80 hours in the first year, increasing with length of service milestones, along with 80 hours of holiday pay per year. **Work Environment** Join a single-source manufacturer providing turn-key mechanical and electromechanical assembly, sheet metal fabrication, and global sourcing of metal and plastic components. The Spokane facility exclusively produces parts for a major customer, offering a small team environment with the opportunity for growth as the site expands to over 60+ people. Work in a sheet metal manufacturing shop alongside welders, powder coaters, brake operators, and quality inspectors. **Job Type & Location** This is a Contract to Hire position based out of Spokane, WA. **Pay and Benefits** The pay range for this position is $22.00 - $30.45/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) **Workplace Type** This is a fully onsite position in Spokane,WA. **Application Deadline** This position is anticipated to close on Feb 9, 2026. **About Aerotek:** We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry - from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies' construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

NIC Global is a single-source manufacturer providing turn-key mechanical and electromechanical assembly, expert sheet metal fabrication, and global sourcing of metal and plastic components. We provide products to great customers such as Philips, PACCAR (Kenworth & Peterbilt), Schweitzer Engineering Laboratories, Physio Controls, and Leviton to name a few. Our growing company employs over 600 people in Washington, Tennessee, Ohio, and Texas. Come work with us and experience our fun atmosphere that provides a great place to work and grow your career. Employees are celebrated through quarterly employee appreciation events, holiday parties, cook outs, company gifts, and various other employee events and recognition programs. We feel that great companies value their employees, and those employees are vital to the overall success of the entire organization. In addition to an outstanding company culture, NIC Global offers other great benefits including: Eligible for insurance 1st of the month after 30 days, including: Choice of two health insurance plans Employer paid employee dental Insurance Employer paid life insurance, AD&D, and long-term disability plans Vision Insurance Additional Life Insurance Accident insurance Critical illness insurance Federal health and dependent care savings accounts (FSA) Eligible after 6 months: 401(k) plan, with employer match Tuition Reimbursement Other benefits include PTO accrual of 80 hours in the 1st year, increasing with length of service milestones and 80 hours of holiday pay per year. JOB SUMMARY The Quality Inspector position conducts origination inspection of parts and supplies, ensuring the quality of products through thorough assessment and analyses using specific procedural standards. ESSENTIAL FUNCTIONS/DUTIES Follows standardized procedures to perform first part, final and receiving inspections on a wide variety of parts and assemblies. Utilizes standard mechanical and electrical instruments, functional gauges and test rigs. Accurately compares products to engineering drawings/specifications, purchase order and inspection plans using common manual inspection equipment. Identifies and documents non-conformances. Provides constructive feedback for quality improvement. Works under direct supervision and in accordance with instructions and techniques. This job description reflects the general nature and level of work being performed by people assigned to this position. Additional duties and responsibilities may be required, based upon business needs, at any time with or without notice. QUALIFICATIONS One (1) year of quality inspection experience or equivalent specialized training which may be obtained in vocational courses or on the job. Proficient use of basic meteorology equipment including, but not limited to, calipers, height gage, surface plate, protractor, radius gauge, micrometer and dial indicator. Working knowledge of GD&T (Geometric Dimensioning and Tolerancing) desired Inspection skills with FARO Arm and Programmable CMM desired Ability to speak effectively and interact with other team members, to express needs and ask questions. Ability to interpret a variety of instructions furnished in written, oral, diagram or schedule form. Knowledge of and familiarity in Microsoft office products and ERP manufacturing software. Basic computer tasks (MS Windows, Office, ERP Software). PHYSICAL DEMANDS Ability to lift 25lbs with or without accommodations.

Full-time Description ALLWEST is seeking an experienced Certified Construction Materials Special Inspector with project management experience to join our Spokane Valley, Washington team. Our team of diverse and driven professionals fosters an environment of collaboration and growth. ALLWEST is an employee-owned geotechnical engineering, environmental, and construction materials testing firm serving the Inland Northwest and beyond. We have six offices located in Idaho, Washington and Montana. If you have a desire to work with a dynamic team, grow your career and have a high level of personal accountability, we want to talk with you! General Responsibilities The Special Inspector is responsible for monitoring materials, installation, fabrication, erection, and placement of construction components to evaluate compliance with plans and specifications. Also will provide accurate preparation of electronic daily field reports that summarize services provided and calculation of test results. Requirements ICC and/or ACI Certifications: ICC Structural Masonry ACI Certified Field Testing Technician Grade I or higher Nuclear Gauge Safety Training Preferred Certifications/Experience: ICC Reinforced Concrete ICC Pre-Stressed Concrete ICC Structural Steel and Bolting ICC Structural Welding AA in civil engineering technology preferred Project management experience Additional Requirements Positive attitude with a customer service approach Effective verbal and written communications skills Attention to detail Valid driver's license and a clean driving record. Ability to travel throughout our Western Washington service region Ability to use computers and mobile devices such as a tablet to record field data Ability to lift and carry up to 50 lbs. alone, and maneuver up to 75 lbs. with assistance ALLWEST Benefits ALLWEST is an employee-owned geotechnical engineering, environmental consulting, construction materials testing, and special inspections firm serving the Inland Northwest and beyond. We offer competitive wages and a robust benefit package including: Health, dental, vision, FSA, HSA, disability, and life insurance. Paid Time Off 401(k) with company match. Employee Stock Ownership Plan. Profit Sharing Bonuses Assistance with study for and obtaining further certifications We are an Equal Opportunity Employer. Salary Description $26-$35/hour

WAQTC Certified Special Inspector Job Type: Full-time Salary: $26.00 - $35.00 per hour (depending on certifications and experience) A reputable construction services firm is looking for a WAQTC Certified Special Inspector to support inspection and materials testing across northern Idaho and eastern Washington. This field-based role requires hands-on expertise, strong technical skills, and a commitment to quality and safety. Key Responsibilities: Perform field inspections and materials testing in accordance with WAQTC procedures and project specifications. Monitor construction activities for compliance with approved plans and applicable standards. Conduct testing and inspection of aggregates, asphalt, base materials, and in-place densities. Prepare accurate, timely electronic field reports and record test results on mobile devices. Operate and maintain field/lab equipment such as nuclear gauges, density equipment, and sampling tools. Communicate professionally with contractors, engineers, and internal team members. Travel throughout the service region for onsite inspections. Required Certifications: WAQTC: Aggregate Asphalt I Embankment & Base In-Place Density Preferred Certifications: ACI Field Testing Technician Grade I or higher Nuclear Gauge Safety Training ICC Certifications in: Reinforced Concrete Pre-Stressed Concrete Structural Steel and Bolting Structural Welding Spray-Applied & Intumescent Fireproofing What You'll Need: Positive attitude and strong customer service approach Excellent time management and attention to detail Comfortable using tablets or mobile devices for reporting Valid driver's license and acceptable driving record Ability to lift up to 50 lbs and maneuver 75 lbs with assistance Willingness to drive to project sites throughout the region Benefits: 100% employee-owned company (ESOP) Company-paid medical, dental, and vision coverage Short- and long-term disability, life insurance, FSA, and HSA options Paid holidays and PTO 401(k) with up to 4% company match

Raycap, Inc., a manufacturing company in Post Falls, is seeking a highly motivated Quality Inspector for our swing shift. In this role, the Quality Inspector inspects components, sub-assemblies, and finished products received and/or built internally. This position works with Quality Management to implement the proper sampling plans based on component specifications, inspection plans, or customer supplied requirements and to provide guidance on required quality tools, methods, and data to assure that shipped product fulfills all customer specifications and quality requirements. This position monitors and maintains Raycap quality processes to assure continual 100% customer satisfaction. Primary Job Responsibilities Collects quality data as required to derive quality objectives Executes and maintains comprehensive quality product inspections Serves as a manufacturing focal point for intelligent analysis of quality issues determining true root causes and implementation of permanent corrective and preventive actions Follows and promotes the use of and implementation of internal quality standards and procedures Reviews documentation for compliance to quality standards Inspects First Articles, incoming components, raw materials, fabricated parts, and in-process assemblies and subassemblies products per Inspection Plans and Specification Requirements Conducts subassembly tests as required to ensure quality products Uses measuring equipment such as calipers and gauges Audits and monitors quality requirements in accordance with the company quality assurance policies and customer specifications Documents and reports inspection findings, results and monitors corrective actions to inspection findings Regular adherence to performance of applicable procedures in the ISO 9001 Quality Management Systems (QMS), ISO 14001 Environmental Management Systems (EMS), and ISO 45001 Occupational Health & Safety Management Systems (OH&S MS); ensuring processes remain sustainable, suitable and effective in relation to position Continuous assessment of opportunities for improvement and any needed changes to management systems Assists with assembly work, when able Qualifications Hands-on quality and manufacturing experience in an ISO certified environment. Proficient in MS Office, Access, Outlook and Adobe programs Experience with Document Control software Familiarity with SAP, ISO-9001, knowledge and application of DFx, FMEA or similar Quality Systems is a plus Physical Demands The employee is frequently required to stand, walk; use hands to operate basic tools, keyboards or controls; reach with hands and arms The employee must occasionally lift and/or move up to 50 pounds Who We Are Raycap, Inc. creates products that protect and support the world's most valuable assets. We support advanced solutions for telecommunications, renewable energy, transportation, defense, and other applications worldwide. We offer A competitive benefit package Paid Time Off from day one 10 annual company paid holidays A Tuition Reimbursement program A generous 401(k) employer contribution Raycap is an Equal Opportunity / Affirmative Action Employer. All qualified applicants receive consideration for employment without regard to age, disability, race, color, national origin, sex, marital status, sexual orientation, gender identity, religion, creed, veteran or military status, or other protected status. We participate in E-verify for all employment verifications. Drug-free workplace.

Qualified Field Inspectors for Insurance Loss Control are needed in your area! Immediate placement available. Pay: We pay a competitive standard flat fee per case -based on customer as well as, inspection type and complexity. The dominant standard flat fee range is $60 - $75, with some exceptions. Job Type: Independent Contractor Qualifications We are currently seeking inspector applicants who are qualified to work in the USA and have a history of direct experience completing commercial line inspections and/or have completed a training course such as, the VIITA Basic Commercial Line Inspector course or its equivalent. Full Job Description of the Loss Control Inspector: · Receives assignments electronically and reviews for inspection requirements. · Schedules the inspection appointment with the Insured by phone, email, or text. · Inspects the property for potential issues or hazards pertaining to utilities/building systems (heating, wiring, plumbing), common areas, maintenance, protections, and life safety, etc. Take 20-35 exterior/interior photos. Take measurements with a measuring wheel or with online tools as needed. · Interviews the Insured for operations information, ages of the building systems, etc. · Communicates inspection status through online application. · Completes the inspection report on the web-based Loss Control 360 system with Rapid Sketch. Returns the completed report electronically (the reports consist of check-off questions, narrative, and digital photos). Preferred skills: 3-5 years' experience providing commercial insurance loss control inspections Understanding of commercial property and casualty lines: property, general liability, and worker's compensation Ability to work independently, manage your time effectively, and communicate well verbally and in writing Comfortable completing reports online and uploading documents Other Recommended Skills: commercial building inspection ~ fire safety ~ industrial safety ~ environmental safety ~ construction work ~ customer service ~ online reporting and document handling ~ ability to travel approximately a 50-mile radius Helpful (but not required) Professional certifications: CSP, OHST, ALCM, ARM H&S Loss Control Inspections, Inc company information: We have provided insurance underwriting Loss Control inspection reports since 1970 and we work directly with insurance Underwriters. Our friendly support staff are available to help you by assigning orders and assisting with questions. Despite the challenges presented by recent events, H&S has been continuing to grow and successfully serve our customers with excellent reports and time service! We look forward to hearing from all qualified applicants!

Apply HERE Only FAR Inspections is looking for highly motivated individuals to perform residential occupancy verifications on behalf of mortgage lenders. Independent contractors earn predictable full-time or supplemental income and enjoy a flexible schedule. Experience with mortgage field inspections is not required but an ability to effectively manage time and meet deadlines is crucial. Based in Reno, NV, FAR Inspections has been in business for over 9 years. Please visit our website to learn more. What is an Occupancy Verification? Mortgage lenders require periodic updates on their properties and to do this they send out independent contractors. The purpose of the property inspection is: To verify property occupancy. To report on the general condition of the property using a mobile application. Most inspections are exterior only. About 10% require interior photos after the property has gone vacant. We contract with inspectors at a county level. This means that you would be responsible to complete all inspections in your county. In some cases, you will split the county with another inspector if there is enough volume for two inspectors. Responsibilities Most common type of inspection should only take 5-6 minutes. Complete the inspection within 4 days after it is assigned. Report general property conditions and make a determination of occupancy based on industry standards. Take 9+ photos of the property with brief comments. Complete a short form in an app. Requires being able to spend extended periods of time driving while making numerous stops during the day in the assigned territory. Requirements (to be considered you must have the following): Computer with an internet connection Reliable vehicle (good gas mileage is a plus as you will be paying for your own gas) Smartphone (Android or iPhone) Printer Pass a standard background check using a valid driver's license Pay and Hours This is a 1099 position. Each inspection has a flat rate. Rates vary based on county and volume. Although you are paid per inspection, you will earn the equivalent of $20-$30 per hour. Depending on a county and if it is urban or rural you will complete anywhere from 20-500 inspections per month working 2-30 hours per week. Lower volume counties have higher rates and higher volume counties have lower rates. There is no set amount of inspections per month, but the work is consistent month-to-month. Earn more as you become established, have greater availability to inspect or are willing to cover a larger territory. No additional mileage reimbursement above the flat fee per inspection. Apply HERE Only

For almost 30 years, SQA Services has been a premier leader in the provision of managed supplier quality services for audits, assessments, remote surveillance assessments, corrective actions, remediation, inspections, and engineering to manufacturers within all industries. We deliver services by deploying associates who are located throughout the United States and in 90+ countries around the world to your supplier sites. Our associates are expert quality assurance professionals with broad experience and local knowledge who can represent our clients on-demand and on-site faster than our competitors. We are seeking a dedicated and highly skilled Mechanical Inspector Level 2 to join our team to support source inspections at multiple supplier locations near Tacoma, WA. This critical role requires an experienced professional with a keen eye for detail and a deep understanding of quality assurance practices. If you have a background in the inspection of machined parts, are proficient with all precision hand tools, and can interpret complex GD&T requirements, we invite you to apply for this exciting opportunity. This position with be on site 1 days a week, 8 hours a day. This is a 1 year contract. Key Responsibilities: Conduct visual, physical, and dimensional inspections (both in-process and final) of parts, per project specifications and requirements. Perform incoming inspections from external providers of products and services (e.g., nickel plating). Conduct in-process and final inspections of critical features, including witness inspections (e.g., CMM program run). Compile final inspection sign-off sheets and inspection packages. Verify that inspection equipment is capable of detecting defects and ensure inspection methodology aligns with drawing intent. Review and validate the justification for parts not inspected at final inspection. Audit and validate the execution of inspection plans as applicable. Document non-conformances using approved methods and submit non-conformance reports for customer disposition. Verify hardware cleanliness and absence of internal or external foreign object debris. Verify fasteners are properly installed; assure torque stripe is continuous and of correct color. Assure products are free of gaps, mismatches, fairing, and of acceptable contour and waviness. Ensure products are of good workmanship and meet specified standards (e.g., oil canning, riding conditions, loose fasteners, drill starts, scratches, dings, burrs, fastener edge distance). Review and validate First Article Inspection (FAI) documentation, including completeness, traceability, and compliance. Ensure the protection and preservation of inspected products for subsequent processing and shipment. Verify applicable shipping documentation for legibility and completeness, including part number, serial number, configuration change letter, and shipping destination. Required Qualifications: Extensive experience as a Quality Inspector or CMM Operator, with industry and commodity-specific expertise. Proficiency in dimensional inspection of precision tolerance parts. Strong knowledge and hands-on experience with all inspection tools. Ability to understand and interpret complex GD&T requirements and validate complex assemblies. Experience with multiple primary and secondary part numbers (e.g., brackets, clips, doublers, splices, brackets, drip shields, etc.). To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Preferred Qualifications: Certified or previously certified in GD&T ASME Y-14.5. 5 years of experience in the manufacturing industry, with at least 2 years as a Mechanical Inspector. Note: This position requires access to ITAR-controlled technical data and/or defense articles. As such, the candidate must be a U.S. citizen or U.S. lawful permanent resident (green card holder) to comply with the International Traffic in Arms Regulations (ITAR). Applicants who do not meet these criteria will not be considered for this role. SQA Services is an Equal Opportunity Employer. Employment is based on merit and qualifications, and is not influenced by race, color, religion, gender, national origin, veteran status, disability, age, sexual orientation, gender identity, marital status, or any other legally protected status. #ZR

GIS Field Services, Inc. has been in the mortgage field inspection industry for over 20 years and is based out of Dallas, TX. We are looking to hire Mortgage Occupancy Field Inspectors to perform residential property inspections on behalf of mortgage lenders. Our independent contractors enjoy a flexible schedule while earning weekly pay. Please visit our website to learn more about us and the industry. ************************ Job Title: Mortgage Occupancy Field Inspector County Coverage: Benewah, Bonner, Boundary, Kootenai, Shoshone Mortgage Property Inspection Overview: Mortgage lenders require periodic updates on the properties they have financial interest in. The lender contracts with GIS to have inspectors go out to verify the property occupancy, report general property conditions, letter delivery/posting, vacant interior walk-through or insurance repair progress report. Majority of our inspections are basic exteriors where some do require contact by door knock or letter delivery. In addition, there will be some inspections which require interior access to secured/vacant properties and appointment-based insurance loss inspections. Job Responsibilities: Requires being able to spend extended periods of time driving Efficient time management to route and complete inspections with an estimated 3-5 day turnaround time (this can vary) in your agreed territory Make a determination of occupancy based on industry standards and report general property conditions Using a mobile app, InspectorADE, to obtain all photographs, comments, and form documentation Consistent communication with your inspection manager via text, email and phone Requirements: Experience preferred, not required Complete a background check using a valid driver's license to obtain a Shield ID (Aspen Grove ABC#) - If onboarded with GIS, we will provide you the link to obtain your Shield ID Computer and internet connection Vehicle with good gas mileage iPhone or Android Printer Volt Stick Set of 11 Hud Keys (Inspector Keys) - If onboarded with GIS, we will provide a link with a discount code to obtain your Hud Keys Daylight availability Office supplies (paper, envelopes, ink) Pay: Set rate per inspection ($15-$20 per hour based on location and the number of inspections performed) Payment - inspections are paid out every Friday for work completed and approved the prior week by direct deposit This is a 1099 Independent Contractor position

Responsibilities At Parker Aerospace, we develop technologies and innovative solutions that enable reliable, efficient and increasingly sustainable flight for the lifecycle of the aircraft, including aftermarket support. Our passionate people with deep engineering expertise, together with our breadth of differentiated technologies, ensure that we make the extraordinary happen and continue to shape the future of aviation in partnership with our customers. As a member of our team, you are instrumental in fulfilling our mission: 'Enabling Engineering Breakthroughs that Lead to a Better Tomorrow.' Pursuing a career at Parker presents unlimited opportunities for both professional and personal development. Working with some of the most brilliant minds in the industry, your contributions will be pivotal in developing innovative technologies and products, significantly contributing to Parker's goal of addressing the world's most pressing engineering challenges. At Parker, our team members belong, matter and make a difference. At Exotic Metals Forming Division, our highly talented team blends a passion for manufacturing with relentless customer support, making us the partner of choice for complex aerospace solutions. Working at EMFD is about being part of a team, a culture, something that is bigger than each of us individually. We began as a small group of people passionately committed to a common goal. That is why we are so proud of everyone in our Exotic family who strives to be the best at what they do every day, working as a collaborative team in a culture of continuous improvement to stretch the bounds of creative thinking and provide quality products to our customers around the globe. Quality Inspector Inspects and checks parts to ensure compliance with documents, standards, and customer requirements under the direction of certified inspectors or supervisor. Functions and Responsibilities * Complete training modules 1-6 or demonstrate understanding of and the ability to complete the following: Paperwork Review and Documentation, Non-Conformances, Dimensional Inspection, Visual Inspection, Visual Weld Inspection, and Drawing Interpretation. * Visually inspect or check parts using a variety of precision measuring instruments. * Check dimensions and finishes against sketches, blueprints, manufacturing planning and specifications. * Perform all work in accordance with established standards and safety procedures. * Any other duties as assigned to help drive our vision, fulfill our commitments, and carry out our organization's virtues. Qualifications * Requires high school level mathematics skills and basic problem-solving ability. * Requires familiarity with machine tools and precision instruments. * Basic understanding of manufacturing planning and sketches. * Has limitations but knows what they are and knows when to stop; seeks help in determining appropriate interpretations. Physical Requirements * Use of protective equipment such as safety glasses as required to prevent injuries. Working Conditions * Demonstrate proper and safe operation of equipment, and personal protective equipment including, but not limited to, safety glasses/full face shield, hearing protection, heat reflective body garments and gloves as required. Pay, Benefits, Work Schedule Competitive Compensation * Pay Range: $19.25/hr to $24.25/hr * Participation in Annual Incentive Program Benefit & Retirement Plans Parker offers competitive benefit programs, including: * Comprehensive coverage for medical, prescription drugs, dental, vision, voluntary optional life, accident insurance, hospital indemnity insurance and critical illness insurance with competitive premium cost. * 401(k) Plan with company matching contributions at 100% of the first 5% of pay. * Company provided defined-contribution retirement plan with annual contribution equal to 3% of pay. * Career development and tuition reimbursement. * Other benefits including paid parental leave, short and long-term disability programs, adoption assistance, a Care.com membership and financial planning assistance are provided at no cost to you. * Supplemental benefit programs including identity protection, legal protection, and pet wellness are available at competitive rates. * Paid Time Off and Company-Paid Holidays. Equal Employment Opportunity Parker is an Equal Opportunity and Affirmative Action Employer. Parker is committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job related reasons regardless of race, ethnicity, color, religion, sex, sexual orientation, age, national origin, disability, gender identity, genetic information, veteran status, or any other status protected by law. However, U.S. Citizenship, Permanent Residency or other appropriate status is required for certain positions, in accord with U.S. import & export regulations. ("Minority / Female / Disability / Veteran / VEVRAA Federal Contractor") If you would like more information about Equal Employment Opportunity as an applicant under the law, please go to Employees & Job Applicants | U.S. Equal Employment Opportunity Commission

Signature Companies is coming to your area! We are prospecting potential High Value Residential Insurance Inspectors to cover Northern Idaho Are you looking for a new career that allows you to work independently, is flexible, and challenging everyday, then we have a new and exciting career for you! Get in Front of Our Recruiter Faster! To ensure your application is reviewed quickly, apply directly on our careers page: Career Site For 30 years, Signature Companies (https:\/\/signaturecompanies.com) has been the industry leader and innovator in providing quality, professional and unparalleled service to our client partners. At Signature Companies we are a High Value Insurance information provider, dedicated to superior customer service, superior quality, and superior time service. Signature Companies is looking for self\-starting, self\-motivated and self\-directed independent contractors (1099) who are creative and knowledgeable in their field and who possess an entrepreneurial spirit to work an area of their choosing, around the area in which they live. We can provide a supplement to your current income or become your main source of income. Experience in Insurance Adjusting, Home Appraisals, Real Estate or Construction is a plus. Experience using Rapid Sketch, Xactimate, CAD or other diagramming programs will be helpful. As a Field Consultant, you will be responsible for scheduling and conducting on\-site High Value Property Surveys. This involves coordinating and completing surveys within your own schedule, managing work assignments you accept and timely completion of web\-based reports. You will visit properties, take photos and measurements, and make note of issues which should be brought to the underwriter's attention. Our experienced and dedicated Field Management team will provide mentoring and support to help you learn and excel at Signature Companies. Details of position: • Work from your home office. • Professionally interact over the phone, via email, and in\-person with homeowners and insurance agents. • Drive to and conduct on\-site property surveys on high value homes as per customer specific guidelines and procedures. • Identify and document the construction materials\/characteristics and unique features of the home. • Obtain measurements of the home and other structures on the property. • Generate an estimated replacement value of the home and identify major hazards. • Communicate the information gathered during on\-site inspection in loss control 360 accessed through the Signature website Requirements Requirements and Tools needed: High level of professionalism Strong oral and written communication skills Must have smartphone, tablet and Windows\-Based PC High speed internet, Digital Camera or Smart phone with 16mp camera or greater, measuring devices such as: laser, soft tape measure, or measuring wheel. A late model reliable vehicle and Auto and General Liability Insurance. BA or BS degree desired but not required. Prior inspection experience on residential homes desirable. Loss Control experience desirable. Prior underwriting experience desirable Construction experience desired but not required. "}}],"is Mobile":false,"iframe":"true","job Type":"Contract","apply Name":"Apply Now","zsoid":"226765652","FontFamily":"Verdana, Geneva, sans\-serif","job OtherDetails":[{"field Label":"Industry","uitype":2,"value":"Insurance"},{"field Label":"Work Experience","uitype":2,"value":"1\-3 years"},{"field Label":"Salary","uitype":1,"value":"1099 Contractor \- Paid per Inspection Completed"},{"field Label":"City","uitype":1,"value":"Coeur D Alene"},{"field Label":"State\/Province","uitype":1,"value":"Idaho"},{"field Label":"Zip\/Postal Code","uitype":1,"value":"83814"}],"header Name":"High Value Residential Insurance Inspector","widget Id":"**********00072311","is JobBoard":"false","user Id":"**********03636028","attach Arr":[],"custom Template":"3","is CandidateLoginEnabled":false,"job Id":"**********20051657","FontSize":"12","google IndexUrl":"https:\/\/signatureappraisals.zohorecruit.com\/recruit\/ViewJob.na?digest=dCMGbVBn.sZWW1TXRQ7lsyA.BQwO.HsKnizKd2OoVoQ\-&embedsource=Google","location":"Coeur D Alene","embedsource":"CareerSite","logo Id":"qrk3b22dd0c24aac6469aaa41265448b5411b"}

Job Description Why Altek is a great place to work: Our team creates products that span the globe, from aerospace to medical equipment. Our products enhance the lives of others and as a member of our organization, you can do the same! We are a people-first organization, offering employees stable employment, an inclusive work environment and great quality of life through work/life balance. We provide full benefits coverage beginning the first of the month following hire. Medical & Dental insurance (employer shares premium on all tiers, including family coverage) Vision insurance FSA option Employer Paid LTD Employer Paid $30,000 life insurance 401k with company match Companywide bonus potential PTO & Holiday Pay Carpool Incentives, subsidized bus passes, bike commuting rewards SUMMARY: The Quality inspectors are responsible for closely adhering to work instructions and related industry standards to carry out measurements and inspections in order to ensure both customer and internal requirements for product have been met. Inspectors must also ensure that product determined to be non-conforming to requirements is effectively prevented from unintended use. Promotes teamwork through their behavior, acting in accordance with Altek's Policies and adhering to the goals and expectations as defined by management. RESPONSIBILITIES: Builds and maintains positive rapport, communication and behavior with other Altek employees, customers and/or suppliers Adapts and modifies as circumstances warrant Demonstrates safe work habits Embraces Altek's Quality Policy to ensure quality to internal and external customers Embraces Altek's vision, core values, and expected behaviors FUNCTIONAL RESPONSIBILITIES: In Process and Final Inspections: Review and understand applicable product standard work instructions and report concerns or inaccuracies between the SWIs and customer requirements. Perform in process and final inspections to check dimensions, cosmetic criteria counts and packaging of parts to ensure quality. Ensure all job operations as well as certificates of compliance and material certificates are complete. Communicate between mold shop, tool room, customer service, paint and machine shop to ensure product meets all quality standards. Answer quality questions from employees and train others on quality criteria as noted on SWIs and the quality policy. File production & measurement documents. Instruct others in dimensional inspection, cosmetic inspection and general blueprint reading. Attend and participate in MRB meetings as needed. Other: Exhibit positive communication and behavior skills. Ability to adapt and modify as situations change. Must be able to work in a team environment. Demonstrate safe work habits. Good attention to detail. Exhibit good problem-solving skills. QUALIFICATIONS: Must be able to work effectively with others Computer literate; able to use MS suite (specifically Word and Excel) Ability to accurately read and use basic measuring tools Ability to follow standard work instructions, where applicable Must be able to interpret customer requirements, where applicable General understand of manufacturing processes, such as molding and machining Some experience in manufacturing required High School Diploma or GED

Wagstaff Applied Technologies manufactures equipment for the nuclear industry. Pay: $30.00 - $40.00 per hour As an employee of Wagstaff, you'll enjoy: Paid non-working holidays Monthly, site-wide BBQs Up to 8% retirement contribution Annual bonus program 1200 Sqft onsite gym, accessible 24/hrs a day Family-friendly, company-wide events To view our full benefits summary, please visit https://www.wagstaff.com/Wagstaff/Careers.htm Want to learn more about Wagstaff AT? Visit https://www.WagstaffAT.com Job Summary Perform inspections of electrical control panels and equipment utilizing knowledge of UL 508A and the National Electric Code (NFPA 70). Primary Job Responsibilities * Read, understand, and interpret electrical drawings. * Conduct documented inspections of control panels and equipment to ensure compliance with drawings, specifications and codes * Complete quality documentation as applicable to the inspection * Electrically and mechanically test, calibrate and perform various quality control and process control functions on finished product * Review customer provided electrical designs and specifications and turn them into packages necessary for equipment production. * Create bills of material in the ERP system * Review customer designs for compliance with UL 508 A and the National Electric Code, bringing any nonconformance's to the attention of the project manager. * Identify potential design, reliability and functionality issues and provide possible solutions that minimize impact on productivity, production schedules and or the customer. * Accurately estimate hours to complete production tasks. * Represent Wagstaff AT when interacting with auditors, customers, suppliers and visitors * Abide by company policies * In order to achieve business objectives, work weeks in excess of 40 hours may be required * Other duties as assigned Requirements * Minimum of 4 years' experience as an industrial electrician. * Current journeyman electrician license preferred * Demonstrated working knowledge of UL 508A and the National Electric Code * Prior experience in electrical inspection preferred. * Detail oriented, accurate, and thorough Working Environment While performing the duties of this job, work is performed primarily in an adequately lit, well ventilated, climate controlled general office environment. Close computer work is regularly required. The work usually involves minimal physical exertion. The noise level in the general office environment is usually moderate. This job may require occasional or more frequent interaction with employees on the manufacturing shop floor. While on the shop floor, the employee may be exposed to fumes, airborne particles, toxic or caustic chemicals, risks of moving equipment and parts, and other risks associated with a manufacturing environment. Because of this environment and associated risks, coordination with shop floor managers/employees may be necessary before entering the shop floor, and use of job appropriate personal protective equipment and clothing is required on the shop floor. The noise level on the shop floor is often loud. Employment at Wagstaff is dependent on successfully passing a company-paid drug screening and background check upon hire. Benefits eligibility is subject to the terms and conditions of the applicable policies, plans and programs of Wagstaff. Wagstaff is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, genetic information, disability, status as a protected veteran, or any other protected category under applicable federal, state, and local laws. PM22

NIC Global is a single-source manufacturer providing turn-key mechanical and electromechanical assembly, expert sheet metal fabrication, and global sourcing of metal and plastic components. We provide products to great customers such as Philips, PACCAR (Kenworth & Peterbilt), Schweitzer Engineering Laboratories, Physio Controls, and Leviton to name a few. Our growing company employs over 600 people in Washington, Tennessee, Ohio, and Texas. Come work with us and experience our fun atmosphere that provides a great place to work and grow your career. Employees are celebrated through quarterly employee appreciation events, holiday parties, cook outs, company gifts, and various other employee events and recognition programs. We feel that great companies value their employees, and those employees are vital to the overall success of the entire organization. In addition to an outstanding company culture, NIC Global offers other great benefits including: Eligible for insurance 1 st of the month after 30 days, including: Choice of two health insurance plans Employer paid employee dental Insurance Employer paid life insurance, AD&D, and long-term disability plans Vision Insurance Additional Life Insurance Accident insurance Critical illness insurance Federal health and dependent care savings accounts (FSA) Eligible after 6 months: 401(k) plan, with employer match Tuition Reimbursement Other benefits include PTO accrual of 80 hours in the 1 st year, increasing with length of service milestones and 80 hours of holiday pay per year. JOB SUMMARY The Quality Inspector position conducts origination inspection of parts and supplies, ensuring the quality of products through thorough assessment and analyses using specific procedural standards. ESSENTIAL FUNCTIONS/DUTIES Follows standardized procedures to perform first part, final and receiving inspections on a wide variety of parts and assemblies. Utilizes standard mechanical and electrical instruments, functional gauges and test rigs. Accurately compares products to engineering drawings/specifications, purchase order and inspection plans using common manual inspection equipment. Identifies and documents non-conformances. Provides constructive feedback for quality improvement. Works under direct supervision and in accordance with instructions and techniques. This job description reflects the general nature and level of work being performed by people assigned to this position. Additional duties and responsibilities may be required, based upon business needs, at any time with or without notice. QUALIFICATIONS One (1) year of quality inspection experience or equivalent specialized training which may be obtained in vocational courses or on the job. Proficient use of basic meteorology equipment including, but not limited to, calipers, height gage, surface plate, protractor, radius gauge, micrometer and dial indicator. Working knowledge of GD&T (Geometric Dimensioning and Tolerancing) desired Inspection skills with FARO Arm and Programmable CMM desired Ability to speak effectively and interact with other team members, to express needs and ask questions. Ability to interpret a variety of instructions furnished in written, oral, diagram or schedule form. Knowledge of and familiarity in Microsoft office products and ERP manufacturing software. Basic computer tasks (MS Windows, Office, ERP Software). PHYSICAL DEMANDS Ability to lift 25lbs with or without accommodations. *This shift is M-Th 3:30pm-2:00am. There is a $2.00/hr differential for working on this shift.* *This shift is M-Th 3:30pm-2:00am. There is a $2.00/hr differential for working on this shift.*

Job Description Raycap, Inc., a manufacturing company in Post Falls, is seeking a highly motivated Quality Inspector for our swing shift. In this role, the Quality Inspector inspects components, sub-assemblies, and finished products received and/or built internally. This position works with Quality Management to implement the proper sampling plans based on component specifications, inspection plans, or customer supplied requirements and to provide guidance on required quality tools, methods, and data to assure that shipped product fulfills all customer specifications and quality requirements. This position monitors and maintains Raycap quality processes to assure continual 100% customer satisfaction. Primary Job Responsibilities Collects quality data as required to derive quality objectives Executes and maintains comprehensive quality product inspections Serves as a manufacturing focal point for intelligent analysis of quality issues determining true root causes and implementation of permanent corrective and preventive actions Follows and promotes the use of and implementation of internal quality standards and procedures Reviews documentation for compliance to quality standards Inspects First Articles, incoming components, raw materials, fabricated parts, and in-process assemblies and subassemblies products per Inspection Plans and Specification Requirements Conducts subassembly tests as required to ensure quality products Uses measuring equipment such as calipers and gauges Audits and monitors quality requirements in accordance with the company quality assurance policies and customer specifications Documents and reports inspection findings, results and monitors corrective actions to inspection findings Regular adherence to performance of applicable procedures in the ISO 9001 Quality Management Systems (QMS), ISO 14001 Environmental Management Systems (EMS), and ISO 45001 Occupational Health & Safety Management Systems (OH&S MS); ensuring processes remain sustainable, suitable and effective in relation to position Continuous assessment of opportunities for improvement and any needed changes to management systems Assists with assembly work, when able Qualifications Hands-on quality and manufacturing experience in an ISO certified environment. Proficient in MS Office, Access, Outlook and Adobe programs Experience with Document Control software Familiarity with SAP, ISO-9001, knowledge and application of DFx, FMEA or similar Quality Systems is a plus Physical Demands The employee is frequently required to stand, walk; use hands to operate basic tools, keyboards or controls; reach with hands and arms The employee must occasionally lift and/or move up to 50 pounds Who We Are Raycap, Inc. creates products that protect and support the world's most valuable assets. We support advanced solutions for telecommunications, renewable energy, transportation, defense, and other applications worldwide. We offer A competitive benefit package Paid Time Off from day one 10 annual company paid holidays A Tuition Reimbursement program A generous 401(k) employer contribution Raycap is an Equal Opportunity / Affirmative Action Employer. All qualified applicants receive consideration for employment without regard to age, disability, race, color, national origin, sex, marital status, sexual orientation, gender identity, religion, creed, veteran or military status, or other protected status. We participate in E-verify for all employment verifications. Drug-free workplace. Monday - Thursday (3:30pm - 2am) with overtime as required.

Job Description Apply HERE Only FAR Inspections is looking for highly motivated individuals to perform residential occupancy verifications on behalf of mortgage lenders. Independent contractors earn predictable full-time or supplemental income and enjoy a flexible schedule. Experience with mortgage field inspections is not required but an ability to effectively manage time and meet deadlines is crucial. Based in Reno, NV, FAR Inspections has been in business for over 9 years. Please visit our website to learn more. What is an Occupancy Verification? Mortgage lenders require periodic updates on their properties and to do this they send out independent contractors. The purpose of the property inspection is: To verify property occupancy. To report on the general condition of the property using a mobile application. Most inspections are exterior only. About 10% require interior photos after the property has gone vacant. We contract with inspectors at a county level. This means that you would be responsible to complete all inspections in your county. In some cases, you will split the county with another inspector if there is enough volume for two inspectors. Responsibilities Most common type of inspection should only take 5-6 minutes. Complete the inspection within 4 days after it is assigned. Report general property conditions and make a determination of occupancy based on industry standards. Take 9+ photos of the property with brief comments. Complete a short form in an app. Requires being able to spend extended periods of time driving while making numerous stops during the day in the assigned territory. Requirements (to be considered you must have the following): Computer with an internet connection Reliable vehicle (good gas mileage is a plus as you will be paying for your own gas) Smartphone (Android or iPhone) Printer Pass a standard background check using a valid driver's license Pay and Hours This is a 1099 position. Each inspection has a flat rate. Rates vary based on county and volume. Although you are paid per inspection, you will earn the equivalent of $20-$30 per hour. Depending on a county and if it is urban or rural you will complete anywhere from 20-500 inspections per month working 2-30 hours per week. Lower volume counties have higher rates and higher volume counties have lower rates. There is no set amount of inspections per month, but the work is consistent month-to-month. Earn more as you become established, have greater availability to inspect or are willing to cover a larger territory. No additional mileage reimbursement above the flat fee per inspection. Apply HERE Only Powered by JazzHR IpN7Wp6gRj

Field-based role - must reside within commuting distance of one of the company's regional offices A growing construction services firm is seeking certified Special Inspectors to support field inspection activities across various commercial and infrastructure projects. This role focuses on monitoring the installation and construction of structural elements to ensure compliance with plans, codes, and specifications. Key Responsibilities: Conduct special inspections on active job sites, including welding, bolting, reinforced concrete, and structural masonry. Review project drawings and specifications to prepare for field inspections. Drive to job sites and perform inspections in accordance with relevant building codes and contract documents. Operate, calibrate, and maintain field and lab equipment as needed. Accurately complete and submit electronic daily field reports with clear summaries of work performed and observations. Maintain open, professional communication with project managers, engineers, and clients. Ensure reporting and documentation meet all regulatory and company standards. Provide excellent customer service and represent the company's values in the field. May assist with limited project management tasks as assigned. Qualifications: Minimum 3 years of field testing or inspection experience required. ICC, CWI, WAQTC, or other special inspection certifications required based on project needs. Must have a valid driver's license and acceptable driving record. Strong attention to detail and ability to work independently in dynamic field environments. Excellent verbal and written communication skills. Work Environment: Onsite and field-based role; involves frequent travel to construction sites. Must be able to work outdoors in varying weather conditions (heat, cold, rain, snow). Physical activities include walking, standing, stooping, kneeling, and lifting up to 50 lbs (75 lbs with assistance). Willingness to work overtime, weekends, and holidays during peak season (March-November).

GIS Field Services, Inc. has been in the mortgage field inspection industry for over 20 years and is based out of Dallas, TX. We are looking to hire Mortgage Occupancy Field Inspectors to perform residential property inspections on behalf of mortgage lenders. Our independent contractors enjoy a flexible schedule while earning weekly pay. Please visit our website to learn more about us and the industry. ************************ Job Title: Mortgage Occupancy Field Inspector County Coverage: Ferry, Lincoln, Pend Oreille, Stevens Mortgage Property Inspection Overview: Mortgage lenders require periodic updates on the properties they have financial interest in. The lender contracts with GIS to have inspectors go out to verify the property occupancy, report general property conditions, letter delivery/posting, vacant interior walk-through or insurance repair progress report. Majority of our inspections are basic exteriors where some do require contact by door knock or letter delivery. In addition, there will be some inspections which require interior access to secured/vacant properties and appointment-based insurance loss inspections. Job Responsibilities: Requires being able to spend extended periods of time driving Efficient time management to route and complete inspections with an estimated 3-5 day turnaround time (this can vary) in your agreed territory Make a determination of occupancy based on industry standards and report general property conditions Using a mobile app, InspectorADE, to obtain all photographs, comments, and form documentation Consistent communication with your inspection manager via text, email and phone Requirements: Experience preferred, not required Complete a background check using a valid driver's license to obtain a Shield ID (Aspen Grove ABC#) - If onboarded with GIS, we will provide you the link to obtain your Shield ID Computer and internet connection Vehicle with good gas mileage iPhone or Android Printer Volt Stick Set of 11 Hud Keys (Inspector Keys) - If onboarded with GIS, we will provide a link with a discount code to obtain your Hud Keys Daylight availability Office supplies (paper, envelopes, ink) Pay: Set rate per inspection ($15-$20 per hour based on location and the number of inspections performed) Payment - inspections are paid out every Friday for work completed and approved the prior week by direct deposit This is a 1099 Independent Contractor position

Qualified Field Inspectors for Insurance Loss Control are needed in your area! Immediate placement available. Pay: We pay a competitive standard flat fee per case -based on customer as well as, inspection type and complexity. The dominant standard flat fee range is $60 - $75, with some exceptions. Job Type: Independent Contractor Qualifications We are currently seeking inspector applicants who are qualified to work in the USA and have a history of direct experience completing commercial line inspections and/or have completed a training course such as, the VIITA Basic Commercial Line Inspector course or its equivalent. Full Job Description of the Loss Control Inspector: · Receives assignments electronically and reviews for inspection requirements. · Schedules the inspection appointment with the Insured by phone, email, or text. · Inspects the property for potential issues or hazards pertaining to utilities/building systems (heating, wiring, plumbing), common areas, maintenance, protections, and life safety, etc. Take 20-35 exterior/interior photos. Take measurements with a measuring wheel or with online tools as needed. · Interviews the Insured for operations information, ages of the building systems, etc. · Communicates inspection status through online application. · Completes the inspection report on the web-based Loss Control 360 system with Rapid Sketch. Returns the completed report electronically (the reports consist of check-off questions, narrative, and digital photos). Preferred skills: 3-5 years' experience providing commercial insurance loss control inspections Understanding of commercial property and casualty lines: property, general liability, and worker's compensation Ability to work independently, manage your time effectively, and communicate well verbally and in writing Comfortable completing reports online and uploading documents Other Recommended Skills: commercial building inspection ~ fire safety ~ industrial safety ~ environmental safety ~ construction work ~ customer service ~ online reporting and document handling ~ ability to travel approximately a 50-mile radius Helpful (but not required) Professional certifications: CSP, OHST, ALCM, ARM H&S Loss Control Inspections, Inc company information: We have provided insurance underwriting Loss Control inspection reports since 1970 and we work directly with insurance Underwriters. Our friendly support staff are available to help you by assigning orders and assisting with questions. Despite the challenges presented by recent events, H&S has been continuing to grow and successfully serve our customers with excellent reports and time service! We look forward to hearing from all qualified applicants!