Inspector jobs in Warwick, RI - 201 jobs

Summary: The Lead Housing Quality Standard (HQS) Inspector is responsible for conducting any mandatory inspection for all leased units under the Rental Assistance Program in accordance to the Department of Housing and Urban Development (HUD) and Department of Housing and Community Development (DHCD) program guidance. As the Lead HQS Inspector the incumbent is expected to assist the Inspections' Supervisor in providing training to newly hired inspectors and with administrative duties as assigned. Why Work for SMOC? Paid Time Off: All full-time employees can accrue up to 3 weeks of vacation, and 2 weeks of sick time and are eligible for 12 paid holidays during their first year of employment. Employer-paid Life Insurance & AD&D and Long-Term Disability for full-time employees. Comprehensive Benefits Package including Medical Plans through Mass General Brigham with an HRA Employer cost-sharing program, Dental Plans with Orthodontic Coverage, and EyeMed Vision Insurance available to full-time employees. 403(B) Retirement Plan with a company match starting on day one for all full-time and part-time employees. Additional voluntary benefits including; Term and Whole Life Insurance, Accident Insurance, Critical Illness, Hospital indemnity, and Short-Term Disability. Flexible Spending Accounts, Dependent Care Accounts, Employee Assistance Program, Tuition Reimbursement and more. Primary Responsibilities: Conduct thorough HUD/DHCD HQS inspections of all SMOC RAPS existing units, potential new units, and the reinspection of those units as required including physical and remote virtual inspections. Verify unit compliance based on health and safety requirements. Verify unit conditions for rent reasonableness comparisons. Enter all inspection data into the MRI Tenmast Software Systems' Inspection module and monitoring information as needed; printing all required inspection-related letters for participating tenants and owners. Assist the Inspection Supervisor in providing "on the job" training for newly hired HQS inspectors in the field Assist the Inspection Supervisor in monitoring the various types of inspections conducted by the HQS Inspection team including remote virtual inspections, re-inspections, inspections conducted using an owner self certification and physical inspections Make recommendations to the Inspection Supervisor on behalf of the HQS inspectors on process and procedure Monitor HQS supplies and make requests to the Program Director on orders for necessary equipment such as gloves, shoe coverings and personal protective equipment as needed Utilize and maintain inspection-related equipment on a regular basis, including camera, hand-held inspection devices or tablets, flashlight, cell phone, tick tester, and inspection-supply cache. Engage all clients by understanding and addressing their needs whether within or outside the scope of work. Attend & participate in engagement team meetings as requested and communicate effectively with clients and staff in other areas. Maintain confidentiality of client, employee and agency information in accordance with federal and state laws and funder requirements. Ensure compliance with program/department, agency and/or funder requirements, as well as SMOC policies & procedures. Other duties as assigned. Knowledge and Skill Requirements: Education: High school diploma or equivalent Minimum years of related experience: 1-2 years preferred Knowledge of Excel, Windows, Word and PCs, ability to work well in a very high volume and productivity environment, ability to handle potentially stressful situations and sensitivity to the needs of economically- disadvantaged clientele. Valid Mass. driver's license and insurance Mobility to use office machines, sitting, standing, ability to lift archive boxes filled with files. Must meet all required DHCD program certifications within 1 year. Organizational Relationship: Directly reports to HQS Inspection Supervisor. Indirectly reports to Program Director, Assistant Director and Division Director. Direct reports of this position are none. Indirect reports of this position are HQS Inspectors. Physical Requirement: Physical effort required to do the job: Mobility to use office machines, sitting, standing, ability to lift archive boxes filled with files. Working Conditions: This job requires working in many different conditions and places. About 80% of the time is outside the office either on the road or at a tenant's unit. Therefore, conditions range from an office environment to an outdoor environment that can be dirty, wet, cold, hot, difficult and risky. As part of the responsibilities of this position, the Lead Inspector will have direct or incidental contact with clients served by SMOC in various programs funded or administered through the Executive Office of Health and Human Services. A successful background check is required.

The Aircraft Technical Inspector (UH60) is responsible for ensuring that assigned aircraft are maintained within required specifications and are airworthy before operation. Inspects repairs and modification of aircraft structures, structural components and engines of complex to extreme difficulty. Plans, conducts, and supervises aircraft technical inspections. Develops and implements quality control and ground safety programs to ensure compliance with contract specifications. Evaluates personnel, including verification of skills, training and experience. Performs audits and inspections of work centers and ongoing maintenance actions, procedures, equipment and facilities. Examines parts and components for conformance to design specification to determine serviceability; serviceable, unserviceable-reparable, unserviceable-non reparable, affixing completed appropriate form/tag for disposition; return to stock, route to appropriate shop for repair and/or turn-in. Form/tag will contain comment relative to evaluation and be stamped by the Inspector. Monitors timeliness and applicability of maintenance technical data and technical library. Reviews maintenance source documents, inspection records, notes recurring discrepancies or trends and initiates appropriate action. Manages the material deficiency and technical order improvement program. Reviews engineering investigation requests. Initiates and reviews quality deficiency reports, technical deficiency reports and hazardous material reports, ensuring that they are accurate, clear, concise and comprehensive. Conducts safety inspections, training, and drills. Inspects and verifies proper completion and documentation of safety and flight discrepancies. Briefs and debriefs pilots and crew members assigned to functional check flights. Participates in maintenance test flights and operation checks as required. Ensures compliance with aircraft configuration control, Army oil analysis Program and test measuring diagnostic equipment calibration. Provides lower level technicians guidance in aircraft repair and technical inspection techniques and procedures according to directives, technical manuals, work standards and operational policies throughout all aircraft modifications and/or maintenance efforts. Prepares evaluations, special reports, and records pertaining to aircraft maintenance repair and related activities. Make entries in aircraft logs and records. Perform other qualified duties as requested. Minimum Requirements Five (5) years of recent applicable aircraft maintenance experience. One (1) year experience inspecting MDS (UH60) assigned. A valid and up-to-date (FAA) Airframe and Powerplant (A&P) license. If no A&P, shall have a minimum of five (5) years as an aircraft inspector on the MDS (UH60) assigned. A Valid FAA Inspection Authorization (IA). If no IA, shall have a minimum of five (5) years as an inspector on the MDS (UH60) assigned. Must be able to obtain and maintain facility credentials/authorization. Note: US Citizenship is required for a facility credentials/authorization at the work location. Valid Drivers License. Knowledge & Skills Knowledge of electrical, mechanical, electronic, hydraulic and pneumatic systems or other technology as applicable to fabrication, repair, operation and maintenance requirements. Efficient in record keeping and preparation of reports; capable of reviewing other people's work and determining accuracy and conformity to standards. Proficient in the use of the Unit Level Logistics System-Aviation Enhanced (ULLS-AE), the current maintenance management system utilized to maintain Army aircraft forms and records. Thorough comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components. Thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems. Detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc. is required. Ability to provide technical support to structural/mechanical engineers and customers. Excellent organizational skills in prioritizing workload to meet aircraft delivery schedule. Physical Requirements/Working Environment Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day. Must be able to climb stairs, ramps, ladders, and work stands. Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders. May be required to lift heavy objects whose weight may exceed 50 pounds. Must be able to type using a standard keyboard to communicate through e-mail and various software applications. Will handle dirty parts and lubricants. Will be required to wear proper Personal Protective Equipment (PPE). Must be able to pass a Respirator Physical and Fit Test qualification. May be required to operate power vehicles, machinery, hand tools, ground support equipment, fork lift, etc. Must be able to lift/push/pull minimum of 50 pounds. May work in normal office environment, maintenance shop or outside. Must be able to work in a shop where the environment is drafty, noisy, and dirty. May be exposed to extreme noise from operating equipment. May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles. COMPENSATION & BENEFITS Salary and Other Compensation: The annual starting hourly rate for this position is $39.41 per hour. Benefits: The Company offers the following benefits for this position, subject to applicable eligibility requirements: medical insurance, dental insurance, vision insurance, 401k retirement plan, life insurance, short-term and long-term disability, 80 hours of vacation accrued on your anniversary, up to 56 hours of sick leave annually (accrued weekly), and 11 paid holidays. Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters.

JOB TITLE: Quality Control Inspector JOB CODE: Quality Control REPORTS TO: Quality Assurance Manager. Direct on-site project direction and daily scheduling provided through continuous communication with the applicable IMIA Project Manager and/or Supervisor. PAY RANGE: $32.00/hour- $42.00/hour based on experience Summary of position: Responsible for monitoring quality control/assurance requirements of all preservation preformed onboard commercial and US Navy vessel in accordance with established Navy regulations and industry standards or specific contractual requirements as defined in the Scope of Work. Collaborate with customer QA personnel on necessary aspects of the job. Essential Job Requirements: Produce/create electronic/handwritten Quality Assurance documentation as Objective Quality Evidence for work performed throughout the preservation process. Develop and Maintain Test and Inspection Plan (TIP) for all assigned jobs. Monitor and document all required readings with regard to, but not limited to, metal anchor tooth (profile), paint wet/dry film thickness (DFT), steel temperatures and all required environmental readings using appropriate equipment to include: micrometer, dry film thickness gauge, infrared thermometer, psychomotor. Ensure all assigned equipment is maintained in good working order with within all calibration certification intervals. All of the above requirements shall be completed in a safe and efficient manner so as not to cause injury to self or others. Required Education: High School diploma or equivalent Required Certification: NACE Inspector and/or SSPC NBPI required. Required Experience: Formal or informal on-the-job training in the marine industry; familiarity with Navy and Society for Protective Coatings standards. Required Skills: Must possess knowledge of Maritime paintings standards with particular emphasis in US Navy ship preservation criterion. Word processing, spreadsheet, email, and database computer skills required. Must be able to accomplish mathematical calculations associated with preservation readings and documentation; must be able to discern and carry out complex written, oral, or diagramed instructions. Must be able to take direction; interact professionally, knowledgeably and cooperatively with supervisors and co-workers and customer representatives. Physical Requirements: Must be physically capable of working an 8-10 hour day requires average use of computer, some physical dexterity, and agility within confined and restricted spaces & tanks. Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform essential job functions. Supervisory Responsibilities: None Working Conditions: Regularly stand for long periods of time; work on scaffolds and ladders; work on top of machinery; work in confined spaces. Regularly exposed to extreme temperatures, high noise levels, toxic or caustic chemicals, fumes, airborne particles, outdoor weather conditions, dusty conditions, wet and/or humid conditions, hazardous machinery, precarious places, close proximity to other employees. Overtime or shift work involved. Travel often required. Must follow strict safety procedures.

Duties and Responsibilities Lead by example and promote the criticality of strict compliance adherence at our client. Lead in the training of personnel on workmanship (IPC-610) and quality standards, where applicable. As part of the team, assure all outgoing product is manufactured in a compliant manner. Support process qualification/validation and new product introduction processes, where applicable. Development and execution of Quality Plans for customer accounts, when required. Review device history records for quality approval, where applicable. Support and execute Redline and Engineering Change Notifications (ECN's) processing. Collaborate with Project Managers (PM's) to analyze customer ECN's and ensure effective implementation to the production floor through proper use of the Engineering Change Order (ECO) process, including reviewing and communicating impacts of any changes (e.g., financial, inventory, WIP, open supplier orders, etc.), as it pertains to Quality. Suggest improvements to ECN/ECO process that lead to improved efficiency, accuracy, and quality. Drive improvement of Quality through analyzing non-conformances (NC's) and performing root cause analysis of discrepancies. Propose, review and implement approved corrective and preventive actions. Collaborate with all internal groups and customers to help determine root cause of customer issues, Complaints, and CAPAs using various techniques including but not limited to Reenactment, PFMEA, Control Plans, Five Whys, Ishikawa (fishbone) Diagrams, Pareto Analysis, etc. Support Supplier Quality Engineering with non-conforming material issues resolution with suppliers, where applicable. Collaborate with cross-functional team to help determine root cause of customer issues. Support the Quality Control inspection process, where applicable. Develop specific Quality Assurance Forms (QAF's) or update Quality information within the Process Control System (i.e. Aegis), when required. Provide Training, as needed. Support the development of quality Receiving Incoming Inspection (RII) plans, as needed. Development of quality and inspection plans. Assist in regulatory audit for customer accounts. Continually build strong rapport with customers through data collection, metrics generation and presentations. Promptly respond to manufacturing floor quality issues, taking appropriate action within the Quality System. Work with PCBA Manufacturing Engineers, assembly, production and test to identify trends and propose and implement corrective actions. Collaborate with Engineering to develop optimal work order routings, where applicable. Collaborate with Supply Chain, PM's and Operations on managing the Material Review Board (MRB) process. Qualifications Positive attitude, self-motivator and tenacious follow up required. Superior customer service attitude. Current or previous IPC-A-610 and/or J-STD-001 certification is preferred. Instructor level beneficial. Excellent teamwork, communication, and interpersonal skills. Bachelor's degree, preferably in a science or engineering discipline. Significant and applicable professional experience may be considered in lieu of certain educational requirements. Placement and inspection equipment knowledge, AOI, Mydata and Juki/Fuji preferred. Minimum of 5 years professional experience in PCB quality manufacturing. 5 to 7 years preferred. Proven problem solver. Knowledge of IPC 620 standard beneficial. Skills in MS Word and Excel such as keyboard short cuts, creating macros and forms, table techniques, working with images and text, pivot tables. Skills in MS Visio such as creating Visio diagrams, creating custom styles and templates, cross functional flow charts, linking drawings to other MS applications, working with data, custom reports, and exporting is valuable. Certified Quality Engineer (CQE) preferred. Pay Rate Range: $26.40 to $29.70 depending on experience #INDENG

A challenging and exciting career is waiting for you! General Dynamics Electric Boat has a proud history dating back to its incorporation on February 7, 1899, and the delivery of the first practical submarine to the U.S. Navy the following year. During the ensuing century, Electric Boat has been at the forefront of every innovation in submarine technology. Today, we are the nation's premier designer and builder of nuclear submarines. We deliver the advantage that protects our sailors, our families and our freedom! We are seeking a detail-oriented Receipt Inspector to join our Quality team. This role is responsible for inspecting, verifying, and documenting incoming materials, components, and equipment to ensure compliance with purchase order requirements, drawings, specifications, and quality standards. The ideal candidate will be highly organized, thorough, and able to work in a fast-paced environment where accuracy is critical. Benefits Medical, Dental, Vision Prescription Coverage Health and Wellness Programs 401K Commuter/Van Services Paid Vacation and holidays Paid training Shift Differential for 2nd and 3rd Shift Advancement Opportunities Receipt Inspector is responsible for, but not limited to, performing the following functions on Contractor furnished material and equipment: Perform inspection and measurement in various conditions Demonstrate competency in understanding Electric Boat procedures Must be able to obtain Receipt Inspection Grade ‘A' Qualification Must obtain Electronic Static Discharge ESD Qualification Coordinate and work with Analysts and Supervisor on proper handling procedures and plans for work Pre-plan tools and requirements for scheduled jobs Review drawings prior to schedule work Pass Jaeger vision testing Process Improvements Identify and implement ways to improve job functions Training: Maintain training requirements and refreshers (LMS) Complete Material Control within 6 months of hire Complete Peer to Peer training within 6 month of hire This position is located at the Quonset Point facility in North Kingstown, RI. Qualifications Required: High school diploma or equivalent OR a minimum of 2 years related technical experience 2+ years of experience in quality inspection, or related manufacturing / industrial environment Ability to read and interpret engineering drawings, specifications, and technical work instructions Experience using basic precision measurement instruments (calipers, micrometers, etc.) Strong attention to detail and accuracy in documentation Basic computer skills, including Microsoft Office or similar software. Must be able to navigate Email and MS Office programs effectively. Must be able to maintain EB certifications and training requirements in Cornerstone. Must be able to obtain and maintain a security clearance through the department of defense Preferred: Associates degree, technical certification, or previous training in quality Prior experience in receipt inspection or aerospace/defense/manufacturing environment Experience with Oracle ERP Vocational, Technical and Community Colleges or Apprentice programs Military Skills Strong organizational skills and ability to manage multiple priorities Effective communication and documentation Problem-solving Team-oriented mindset with a commitment to quality and compliance Physical Qualifications Climbing, Color Vision, Crawling, Kneeling, Light Lifting, Medium Lifting, Pulling, Pushing, Reaching, Stooping, Twisting Environmental Attributes Cold, Dry, Dusty, Fumes, Hot, Inside, Oily We can recommend jobs specifically for you! Click here to get started.

We are seeking a Quality Control Inspector with experience in conducting first article inspection processes to ensure the quality of finished products. The ideal candidate will have some prior experience with FAI, knowledge of quality assurance techniques, and the ability to interpret engineering drawings and technical documents. Responsibilities: Assist in Conducting First Article inspection (AS9102) processes and document activities Interpret test results for acceptance or rejection Record test results and compile nonconforming output report Mechanical Inspection Electrical Point to Point wiring continuity testing Maintain calibration logs Qualifications: Minimum experience with first article inspection processes (Will Train) Knowledge of quality assurance techniques and functions Previous experience with calipers and micrometers Ability to read and interpret engineering drawings, specs, and other technical documents Mechanical aptitude Excellent communication skills both verbally and in writing

Job Description **What makes us strong? **Our employees in 50 countries worldwide - all working with passion to enable high-tech applications with our strong metals: tungsten and molybdenum. At our Plansee site in Franklin, USA, we specialize in transforming semi-finished molybdenum and tungsten products into complex components-leveraging decades of precision manufacturing and engineering excellence. Join a highly motivated team in Franklin, USA, where local expertise meets the global knowledge and values of the Plansee Group. RESPONSIBILITIES Perform first piece, in-process and finished machined part inspections including first article inspection for conformance to quality assurance standards. Accurately completes all quality control documentation such as non-conforming material, travelers and control charts. Create and store electronic inspection reports using customer drawings and specifications. Follows verbal and/or written instructions such as blueprints, traveler, work instruction, process specifications, and sketches, in completing a variety of inspection tasks. Verify that inspection equipment, machinery and tools used are calibrated per Company standards. QUALIFICATIONS High School diploma or GED. Technical school education in manufacturing technology and/or ASQ certified inspector a plus. Strong knowledge of GD&T and ability to read and interpret machining and fabrication drawings. Proficiency in the use of the MS Windows (Word, Excel, Outlook) and MRP systems. Strong attention to detail and advanced shop math skills. Ability to calculate trigonometry formulas a plus. Knowledge of running and programming Zeiss Calypso CMM software a plus. Understanding of aerospace requirements (AS9100, AS9102, ASTM's) preferable. Meet the requirements under ITAR - U.S. Citizen or Permanent Resident (Green Card holder). **BENEFITS ** Medical - 90% paid for with 100% reimbursement on deductible Dental Vision Flexible spending accounts Company paid life and disability insurance 401 K w/ company match Time off Benefits Pay range: $25-$32 per hour + bonus plan And much more! Equal Employment Opportunity We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity and/or expression, status as a veteran, and basis of disability or any other federal, state or local protected class. You should be proficient in: GD&T Quality Inspection Experience Standard Operating Procedures (SOPs) AS9100 AS9102 Quality Control Experience Quality Control Data Analysis AS9100 Experience Machines & technologies you'll use: Coordinate Measuring Machine (CMM) (Zeiss)

Headquartered in Atlanta, Georgia and founded in 1993, Precision Aviation Group (PAG) is a leading provider of maintenance, repair, and overhaul (MRO) and value-added supply chain services to the aerospace and defense industries. With 25 FAA-approved repair stations, 27 locations worldwide, 1,100+ employees, and over 1.2 million square feet of production/distribution facilities, PAG offers comprehensive MRO services on over 200,000 product lines. PAG supports operators in the Airline, Business and General Aviation (BGA), Military and Rotary Wing markets through its Inventory Supported Maintenance, Repair, and Overhaul (ISMRO ) business model. JOB PURPOSE We are seeking motivated candidates for this position which involves receiving, inspecting components for repair and overhaul, generating pre-established technical documentation and shop travelers. Data entry experience is a plus! but not required. JOB DUTIES AND RESPONSIBILITIES Essential Job Functions: • Receiving incoming Components for Repair / Overhaul • Generating documentation, technical data and shop travelers using customer repair orders as guidance. • Perform Visual and Dimensional Inspections using manual inspection tools to determine serviceability • Perform Floor Inspections on various machines / ensuring tolerances are met • Maintain FAA Documentation / Record keeping • Prepare Customer Repair / Overhaul Quotes • Perform Final Inspections / Generate FAA / DOT Documentation • Assist in Maintaining FAA/DOT Quality System WORKING CONDITIONS Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. This position may require walking primarily on a level surface for periods of time as well as reaching above shoulder heights or below the waist or lifting as required to file documents or store materials throughout the workday Equipment Operated: Ability to operate office machines and equipment and troubleshoot problems with equipment. Work Location: Aviation Welding Technologies, LLC 73 Commerce Drive, Uxbridge, MA Protective Equipment Required: None Potential Hazards: Exposure to materials identified on Material Safety Data Sheets. JOB SPECIFICATIONS Knowledge, Skills and Abilities: Must have a minimum of 5 years' experience. • Must be Highly Motivated individual • Must possess Excellent Organizational and Communication Skills • Must have Data Entry Skills / computer literate • Must be able to read, write and understand English • Must be available to work Fulltime, M-F, Hours ranging from 7am- 5pm • Must pass FAA/DOT Pre-Employment drug test and background screen, also will be subjected to random drug and alcohol testing. Education/Training: Minimum of a H. S. Diploma or GED. Experience: Minimum of 3 years' experience. Certificates/Licenses: None We offer competitive pay and a wide variety of benefits. Full time associates qualify for health benefits the first of the month following 30 days' employment. Options include 4 medical plans, 2 dental plans, vision, base life (company paid), voluntary life, short and long-term disability, flex spending accounts, and telemedicine. Other benefits include vacation and PTO time accrued with each pay cycle with a vacation carryover/payout option at year end, 9 paid holidays, 401k with company match contributions. Qualified candidates with strong drive, work ethic and commitment to quality are invited to apply at www.precisionaviationgroup.com using the Careers tab. EOE/Vets/Disabled

Roof Performance Inspector is responsible for completing documents, forms, processes, and data gathering to ensure accuracy, quality and integrity in our roof inspection reporting. Documents include electronic, hard or soft copies. This position is responsible to perform specific inspection services at the direction of GRS Management team. The Roof Performance Inspector will work independently or with other resources depending on the task being performed. The RP Inspector will complete and be responsible for all types of job site inspections including Campus Care, Roof Restoration Qualifications, and Roof Maintenance Inspections. The Inspection technician is responsible for daily review and performance of efficiency, and quality as it relates to the performance of inspection services. ESSENTIAL DUTIES AND RESPONSIBILITIES: RP Inspector is responsible for performing the inspection services. They are to be on time and complete work scheduled. The RP Inspector will perform all services in a professional manner as it pertains to conduct, appearance, and communication. Must be familiar with all forms of low slope roofing systems. Must be knowledgeable with manufactures and proper applications Daily responsibilities include, but are not limited to: Review and confirm all work inspections scheduled. Take photos to document phases of work performed on the job. Complete Roof Reports and inspections utilizing FCS software. QUALIFICATIONS: 3-5 years direct hands-on experience in commercial roofing business. Ideally has experience with quality assurance and roof inspections with roofing contractor. Understanding of commercial roofing assemblies and their applications. Several years of hands-on experience in commercial roofing including exposure to installation methods for commercial roofing and other related products. Ability to read technical roofing documentation/specifications. Is comfortable working with MS Outlook, Word, PowerPoint, and other office technology. You are comfortable demonstrating and presenting product applications, either hands-on or in presentation format. You are passionate about quality workmanship while also building lasting customer relationships for the future. Motivated, competitive, passionate, and flexible. Can effectively manage multiple tasks while working independently. Excellent written and verbal communication skills. You can confidently reach out to and work with clients and/or general contractors. Adaptable to changing priorities and responsibilities with a “get it done” attitude.

About Us: As a global manufacturer of complex aircraft engine components, Pursuit Aerospace is founded on a commitment to relentless, continuous, operational improvement and extraordinary customer service. We pride ourselves on competitive cost structure, exceptional on-time delivery, and industry-leading quality. The Pursuit family of companies has cultivated long-term relationships with our customers around the world through respect, teamwork, technology, and trust. We are driven to develop industry leading process innovations and manufacturing techniques on behalf of our customers. Our exceptional quality is driven by a deep investment in and the daily practice of continually improving our people, processes, and products. About the Opportunity: As an Inspector here at Pursuit Aerospace, you will have the opportunity to be immersed in a high-paced manufacturing environment. Working alongside the production team, and fellow inspectors, you will be responsible for ensuring product being produced meets all our customer needs and specifications. Location: Eastford, CT This is a full-time role 7 AM to 3:30 PM , Monday through Friday with occasional weekends. Responsibilities: Verifies dimensional and visual conformance to customer requirements Responsible for accurately completing paperwork relating to counts and scrap Variable data collection and completion of inspection records using basic inspection tools and methods Interpret engineering drawings and specifications and confer with quality, engineering, or leadership staff to determine conformance of product Manage production inspection needs, along with finished product Perform other related duties as assigned Will need to be engaged with Flow Line to help keep product moving Will be required to do first pieces throughout the day Required Qualifications: High School Diploma or GED equivalent Working knowledge of basic inspection tools (i.e. dial calipers, micrometers, indicators, etc.) 3 months experience understanding and reading basic blueprint requirements (i.e. notes, dimensional lines, section views, symbols, etc.) Must be authorized to work in the U.S. on a full-time basis without sponsorship now or in the future. The Company cannot offer employment to visa holders who require employer sponsorship in the future or cannot work now on a full-time basis. Must be able to perform work subject to ITAR/EAR regulations. Preferred Qualifications: Multi-tasking abilities, adept to managing frequent shifts in priorities Must be organized, follow direction, along with company quality standards put in place 6 months experience using inspection methods (height gage, optical comparator, pi tapes, etc.) is a plus Attention to detail Physical Requirements: Requires mobility in a manufacturing plant environment while using Personal Protective Equipment Must be able to frequently sit, stand and walk Clear vision, able to pass basic visual test Must be able to lift and carry up to 15 pounds Acknowledgements: The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor. Benefits: Pursuit Aerospace also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements, among other things. Equal Opportunity Employer: Pursuit Aerospace is an Equal Opportunity Employer. We adhere to all applicable federal, state, and local laws governing nondiscrimination in employment, and we do not tolerate workplace harassment based on race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, or veteran status.

Schedule: Monday - Friday 2:30pm - 11:00pm *Overtime Opportunities Available* 2nd shift: 5% Shift Differential Primary Duties and Responsibilities: Perform work in a safe manner by following all safety rules and providing recommendations to help make PCC a safe work environment. Achieve team production and efficiency goals by working to meet all operational and quality standards to ensure a high level of customer satisfaction. Perform somewhat diversified duties to accomplish a variety of in-process and final inspection operations on production parts following established methods and procedures, and/ or specific instructions. Visually inspect parts for surface finish quality, proper form and features, and for the presence of cracks, damage or other disqualifying defects. Perform dimensional inspections as required, using micrometers, indicators, Vernier's, plug and thread gages and any special hand gaging equipment required. Originate and maintain required inspection reports in specified form. Prepare necessary rework or salvage orders to request correction of discrepant parts. Detect faulty operations, defective material and report these and any unusual conditions to proper supervision. Experience and Education: A high school diploma or equivalent is preferred but may be substituted by manufacturing experience. One year of manufacturing experience preferred, previous experience in the casting industry is a plus. Requirements: Ability to bring your best self every day to safely meet or exceed production and quality standards. Ability to thrive in an environment where business and team needs may change to help meet business and customer demands. Understanding of basic math calculations. Ability to use precision measuring instruments, test equipment or other devices where interpretation is required. Ability to perform duties in manufacturing environment which may include exposure to noise, dust, chemicals, and varying temperatures. Ability to lift up to 35 pounds with or without reasonable accommodations.

We are a growing manufacturing company looking for an individual to assist or lead our quality control department Requirements A qualified individual would: Be able to read and interpret drawings. Understand GD&T. Understand a variety of sampling plans. Utilize best practice inspection methods to ensure product conforms to customer and drawing specifications. Be familiar with and able to use a variety of inspection tooling (micrometers, calipers, CMM, indicators, optical comparator, etc). Have good computer skills (Microsoft Office, Outlook, be able to learn a robust ERP system). Be familiar with completing first article inspections per AS9102 and complete utilizing specialized software. Have a good organizational skill set as each customer has a different set of requirements that are critical to product acceptance. Be familiar with the requirements of ISO9001. Attention to detail is critical. FULL TIME EMPLOYEE BENEFITS: Competitive compensation based on experience BCBS Medical, Altus Dental and Vision, Disability and Life Insurance - 100% Company Paid. Paid personal and vacation time (PTO) 10+ Paid holidays 401K plan Potential for Growth OT based on business conditions COMPANY: Bendon Gear is a precision machine and gear company doing business for over 40 years, with a stable set of excellent customers. We are a good, solid company, and we wish to build a team of good people who are motivated, flexible, and capable. Job Types: Full-time, Part-time Salary: $18.00 - $27.00 per hour Benefits: 401(k) Dental insurance Health insurance Life insurance Paid time off Professional development assistance Vision insurance Schedule: 10 hour shift 8 hour shift Monday to Friday Salary Description $18 - 27.00 / Hr

Job Purpose Responsible to supervise and monitor the casino tables operation to ensure an exceptional guest experience during game play in accordance with company standards and gaming regulations. Key Performance Areas Tables Inspection Monitors Gaming Tables and Dealers Ensures relevant game information is communicated Keeps Gaming Floor Manager informed of information relevant to the games Provides audible and precise game commentary Communicates equipment defects Validates pay-outs Accurately tracks guests play on Casino system Identifies and escalates cheating and suspicious activities Controls discretionary/ complimentary spend Float management Opening and closing of tables Communicates any special guest requirements or events to other relevant operating departments Provides feedback and reports back to management on the performance and challenges on the tables floor People Supervision Supervises employees to ensure that staff uniform, hygiene and appearance is maintained Conducts performance contracting, reviews and development Identifies performance gaps Conduct coaching and on job training Identifies and addresses misconduct issues Keeps records of coaching discussions Informs department / staff of information required to perform the duties and tables floor operation effectively Communicates department's objectives, standards and operating procedures to internal and external service providers as per SLA Requirements Education and Experience Grade 12 or equivalent national qualification in gaming operations An additional supervisory qualification is preferred 1 year experience as a Table dealer or previous Supervisory experience preferably obtained in the gaming industry Skills and Knowledge Core & Personal behavioural competencies Problem Solving Collecting Information (listening; asking questions) Dealing with Customers Handling conflict Checking Following Instructions Emotional resilience Honesty in the handling of cash Presentable Technical / proficiency competencies English verbal communication skills Numerical skills (calculations of large numbers) Inspecting tables games including Roulette / Blackjack Use Gaming Tables equipment - chip handling, chipping machines, Shuffling machines Betting procedures Compliance procedures and regulations Basic responsible gambling principles Proficient MS Office skills Equity Preference will be given to employees from the designated groups in line with the provisions of the Employment Equity Act, No. 55 of 1998, SISA internal recruitment policy as well as units employment equity plans. Work Level Skilled Job Type Permanent Salary Market Related EE Position No Location Worcester

Growing Pharmaceutical, Biotechnology and Medical Device companies always need TOP Talent. Since 1996, MakroScientific's proven staffing solutions have helped many Life Sciences companies succeed and visualize their goals by increasing innovation and decreasing costs while maintaining the complex service level expectations. Our global presence with offices in USA (NJ, PA, IL, CA) and offices in UK, Europe and Asia enables us to be a powerful contributor and connector of right Talent. Job Description Job Title: Quality Inspector Duration: 6 Months Location: Northborough, MA Position over view: • Monitors and/or performs inspection and control of products and materials. • Performs product and/or component inspections in accordance with specifications and SOP.s. • Samples, inspects, and releases components and raw materials as per SOP.s and specifications. • Monitors various stages of processing along with the appropriate paperwork in compliance with specifications. • Maintains raw materials, in-process and finished goods retain storage areas. • May conduct simple testing in accordance with defined standard operating procedures. • Contact with outside vendors as necessary. • Filing and archiving study related documents, includes lifting of boxes (~25 - 40 lbs). • Demonstrated ability in the application of the requisite skills to perform the required tasks of the position. • Receives general instructions on routine assignments under general supervision. • Receives detailed instructions on new work, which may be closely supervised and reviewed. • The work environment characteristics described here are representative of those an employee to encounters while performing the essential functions of this job. • Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Job has potential for biohazard exposure. • Experience 1-3 years. SKILLS Over viewed: • Multi-task oriented with the ability to change focus quickly • cGMP experience/knowledge is preferred. • Quality Inspection experience is preferred. • Proficiency in Microsoft Office Suite is a must (especially Microsoft Word and Excel) High organizational skills preferred. Qualifications Education over viewed: • Associates Degree or Bachelor's Degree preferred Additional Information All your information will be kept confidential according to EEO guidelines.

The Town of Halifax is now accepting applications for the position of Animal Inspector. This position is responsible for inspecting all farm animals and the premises where such animals are kept and deals with quarantines of animals including cats and dogs, in addition to other duties such as quarantines of animals with a contagious disease. This is a part-time, as needed and on-call, non-union position and is not eligible for benefits. As a condition of employment, the successful candidate must complete and pass a background check (CORI). Pay rate: $290.75 per month (Stipend) Application, resume, and any associated documents must be submitted online no later than Friday, December 12th, 2025. The Town of Halifax is an equal opportunity employer. Download Job Description (PDF)

The Quality Control Technician - Troubleshooting is responsible for inspecting and testing cable and wire products and processes to ensure they meet all quality standards, specifications, and regulations. This includes performing visual inspections, dimensional measurements, electrical, and functional tests. The primary function of this role is to evaluate nonconforming products and to determine the necessary actions to rework the product. The QC Technician must also be able to read and interpret blueprints, engineering drawings, and specifications. This position requires the use of High Voltage, all safety guidelines, procedures, and regulations to prevent accidents and ensure a safe working environment must be followed. The Quality Control Technician - Troubleshooting is a respectful team-player that works well with diverse internal team members. This position is ambitious, self-motivated, results-driven, and demonstrates problem solving skills with sound judgment. This role is also responsive, flexible, accessible, detail oriented, willing to embrace change and proactively adjust plans. Partnering with and elevating others by communicating with peers to increase awareness and ensure team success. Essential Duties and Responsibilities: Troubleshoot nonconforming cables, fill out nonconformance reports and communicates findings to Production Quality Supervisor and Quality Manager Detect and report unusual or non-conforming documentation, materials, conditions, or product to Production Quality Supervisor and Quality Manager. Assist and sometimes lead Root Cause and Corrective Action efforts. Inspect materials, components, and final product to ensure they meet quality standards. Measure dimensions of cable and wire products to ensure they meet specifications. Conduct visual and electrical tests on cable and wire products to ensure they meet performance requirements and identify any defects. When required, perform functional tests on cable and wire products to ensure they operate as designed. Document the results of all tests and inspections. Create, update, compile, save and maintain documentation into internal database. Work with various internal personnel and departments to communicate and resolve quality issues. Comply and support company policies and quality management system. Maintain and create a clean, uncluttered environment that reduces waste and optimizes productivity by following the 5S steps: sort, set in order, shine, standardize, and sustain. When required, help with continuous improvement efforts. More additional responsibilities may be applicable per the Quality Manager. Qualifications: High school diploma or equivalent. 1+ year of experience in quality control, preferably in the cable and wire manufacturing industry. Experience with visual inspection and dimensional measurement. Basic understanding of Microsoft Office and Adobe. Ability to read and interpret blueprints, engineering drawings, and specifications. Strong attention to detail. Ability to work independently and as part of a team. Strong communication skills. Proficient with computers and comfortable using Microsoft Office Suite (Word, Excel, etc.). Physical Qualifications: The physical demands described are representative of those that must be met by an employee to successfully perform the essential function of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to sit; stand; crouch; stoop; walk; talk; hear; use hands to handle or feel assemblies; reach with hands and arms for materials and tools. The employee must occasionally lift and/or move up to twenty-five (25) pounds. They must also have the ability to see details at close range (within a few feet of the observer), color vision, depth perception and ability to focus. This position requires use of information or access to hardware and documents which are subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee. Benefit Conditions: Waiting period may apply Only full-time employees are eligible This Job Is: A job for which military experienced candidates are encouraged to apply Job Type: Full-time Salary: $20.00 - $25.00 per hour Benefits: 401(k) Dental insurance Health insurance Paid time off Vision insurance Experience level: 1 year Schedule: 8 hour shift Day shift Monday to Friday Overtime Work setting: In-person Experience: Blueprint reading: 1 year (Required) Quality control: 2 years (Preferred) Work Location: In person

Nordson EFD, a global leader in Engineered Fluid Dispensing, is seeking an experienced and highly motivated individual to join our team. We are committed to creating a diverse and inclusive workplace, and we are looking for candidates who share that same commitment. Summary of the role As a member of our team, you will have the opportunity to work in a dynamic and collaborative environment, where your ideas and contributions will be valued and respected. Essential Job Duties and Responsibilities Perform periodic visual, dimensional, and functional testing of molded parts and assemblies, as required in the work instructions Enter inspection data in the appropriate computer file Perform measurements properly using pin gages, digital calipers, micrometers, optical comparators, and other measuring equipment. Put defective product on hold, per the work instructions Perform special QA inspection / assembly inspection / sorting projections as required Communicate part / assembly issues noted to the responsible supervisor and / or QA Management Practice good housekeeping and appropriate measures to prevent pollution or other negative impacts on the environment Minimum Requirements High school graduate or equivalent Solid computer knowledge: experience with Microsoft Office Must be able to communicate in English At least 3 years experience in quality and/or a production environment At least 3 years experience with basic mechanical and measuring equipment At least 3 years experience in a manufacturing environment Preferred Skills and Abilities ASQ CQI Certification Working Conditions and Physical Demands Manufacturing and warehouse environment. Frequent stooping and bending. Regularly required to sit or stand and move about the facility. Physical ability to lift boxes up to 70 lbs. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed above are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Nordson Corporation provides equal employment opportunity to all applicants and employees. No person is to be discriminated against in any aspect of the employment relationship due to race, religion, color, sex, age, national origin, ancestry, disability, sexual orientation, gender identity, genetic information, citizenship status, marital status, pregnancy, veteran status or any other status protected by applicable federal, state, or local law. All employment offers are contingent upon successful completion of our pre-employment drug screening and background/criminal check, consistent with applicable laws. Interested? If you are interested in being a part of a team and creating an inclusive and diverse workplace, please apply online with your CV. About Nordson EFD Nordson EFD is a world-leading designer and manufacturer of fluid dispensing systems and single-use fluid packaging. By joining our team today, you will help us bring innovative ideas to life. Nordson EFD is a global team that works to create systems and consumables that improve the fluid dispensing process. We offer a supportive culture in a growing and dynamic work environment. Whether you're just beginning your career or you're a seasoned professional, there's a place for you to belong at Nordson EFD. We offer hourly and salary positions in production, maintenance, customer service, quality, engineering, and more. We actively invest in our teams to help you build your skillsets and advance your career.

Job Description Your Precision Fuels High-Stakes Missions Satellites launch, aircraft fly, and medical systems perform because components meet exacting standards. At Senior Metal Bellows, our custom-engineered metal bellows enable these outcomes-and we're seeking an AS9102 First Article Inspection Technician to ensure every part conforms before it enters service. Impact You'll Make Own first piece and AS9102 first article inspections for high-performance components Interpret complex engineering drawings and specifications with confidence Apply GD&T (ANSI Y14.5) to verify geometry and function Collaborate with engineering to build and optimize inspection techniques Use data from inspections to identify root causes and drive continuous improvement Operate CMMs, optical comparators, micrometers, verniers, drop indicators, height gages, and related precision tools Experience & Mindset Depth in precision inspection and geometric dimensioning Practical, hands-on expertise with CMMs and manual metrology Meticulous attention to detail; fluent in complex prints Collaborative communicator with a team-first approach Continuous improvement orientation and strong problem-solving skills Grow with a Proven Innovator For over 70 years, we've pushed the limits of what's possible, serving aerospace, defense, energy, and medical markets. Join a culture grounded in collaboration, innovation, respect, trust, and excellence-backed by the global reach of Senior plc with opportunities across 12 countries. Work at our convenient Sharon, MA location just off Route 95. Compensation Hourly Rate Range: $29.00 - $34.00. Final rate will be determined by relevant experience, skills, and qualifications. Take the Next Step If you're ready to build something bigger-and ensure zero-compromise quality-apply today. Required Notices All your information will be kept confidential according to EEO guidelines. Access to our facility (and, therefore, employment) is restricted under the International Traffic in Arms Regulations (ITAR) and/or Export Administration Regulations (EAR) to U.S. Citizens, lawful permanent residents of the United States and properly-licensed foreign persons.

The QC inspector is responsible for ensuring that all products meet quality standards. This includes inspecting raw materials used in the production process, conducting tests on finished products and performing audits to identify potential areas of improvement. The QC inspector must be knowledgeable of the relevant safety regulations and have excellent attention to detail and problem-solving skills. Essential Functions Responsible for individual Inspection activities Undergo training when necessary Adhere to policies and procedures related to specific customer requirements Ability to understand specific directions and follow guidelines that are common throughout the department Ability to maintain a constant focus on quality and accuracy Ability to work with minimal supervision Specific competencies include but are not limited to following the Gowning, Personal Hygiene Procedures, and all other QC Inspection Work Instructions and SOPs including formatting Excel if required, Use of inspection equipment (Bench Linc, Vision Systems, Tensile Tester, Pin Gages, Ring Gages, Calipers, rulers, and Customer supplied fixtures) Perform Visual Inspection (using Tappi Chart) and Feel Testing. Operating the Annealing Ovens Obey all safety rules, use caution in work activities, and continuously practice safe behaviors Immediately report unsafe conditions/behaviors and work-related injuries to site supervision Qualifications Preferred High school diploma or equivalent 1 year of Product Operator experience necessary Experience within the department must be gained within 90 days for use of specific measuring equipment, displaying an understanding of the job requirements and any devices required to complete inspection/test activities Understand Quality Management System (QMS) requirements Training on the specific equipment must be fully completed within 90 days of hire Equivalent combination of education and experience is preferred An Affirmative Action / Equal Opportunity Employer Proterial Cable America, Inc. provides equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, or veteran status. As a Federal Contractor, we encourage priority referral of protected veterans under VEVRAA.