Inspector jobs in Waukegan, IL - 632 jobs

The Operator - Visual Inspection will work at our client's Manufacturing site in Kenosha County WI, where parenteral products for domestic and international markets are manufactured and packaged. The primary purpose of this role is to safely inspect high-quality pharmaceutical products in accordance with site standards and current Good Manufacturing Practices (cGMP) within controlled facilities. This position requires operation of various automated and semi-automated manufacturing equipment, as well as performance of manual inspections. The operator is responsible for ensuring product quality while demonstrating a strong commitment to safety, compliance, and operational excellence. Responsibilities: • Adhere to Parenteral Manufacturing safety policies and procedures and contribute to a safe work environment. • Set up and operate non-aseptic manufacturing processes, including automated and semi-automated inspection equipment in controlled facilities. • Follow standard operating procedures (SOPs), cGMP requirements, and safety policies and procedures. • Accurately document process steps using appropriate batch documentation systems (paper and electronic). • Participate in department meetings, team-building activities, and training programs. • Provide input into department SOPs and training materials as needed. • Maintain accountability for working safely and supporting all site and corporate health and safety goals. Basic Requirements: • Minimum education: High School Diploma or GED • Must pass a post-offer physical examination • Must pass an eye exam and not be color blind • Ability to wear required safety equipment (safety glasses, safety shoes, protective gloves, etc.) • Ability to work within a shift-based schedule • Willingness to work overtime, weekends, and off-shifts as required Additional Skills / Preferences: • Experience working in a GMP-regulated environment • Ability to troubleshoot basic production issues and effectively use tools • Experience with PMX, MasterControl, Flow-stream, or other electronic batch documentation systems • Previous pharmaceutical manufacturing experience • Experience with manual, automated, and semi-automated inspection processes • Strong attention to detail when performing manufacturing tasks and documenting production activities on paper and computer-based systems • Basic math skills, including evaluation and interpretation of production data • Basic computer skills, including use of HMIs and other computer terminals to monitor equipment status and document production activities • Excellent documentation skills • Proven teamwork skills and ability to work closely with operations teams during line setup, operation, and changeovers Additional Information: • Ability to work overtime as required • Ability to wear required safety equipment (glasses, shoes, gloves, etc.) • Primary work location: Kenosha County, Wisconsin • Ability to travel up to approximately 10% This is intended to provide a general overview of the job requirements at the time it was prepared. Job responsibilities may change over time and may include additional duties not specifically described. For GMP purposes, the job description should be updated for significant changes. Employees should consult their supervisor regarding actual job responsibilities and related duties.

Altom Transport is currently seeking an HM183 Cargo Tank Inspector to fill a first-shift position at our Chicago terminal. This role also includes responsibilities as a lead trailer mechanic. Our full-service maintenance facility is designed to work on our private fleet. Take the next step in your career and join our family. Visit altomtransport.com and apply today. Feel free to reach out directly to us with any questions! This position operates out of our Chicago/Joliet terminal. Compensation: Full compensation package: $75,000 - $100,000 based on location and experience Requirements A self-starter that works as a team member under the direction of management Ability to prioritize work and follow through with repairs Must be creative, dedicated, and take responsibility for repair work Verifiable mechanical experience and own hand tools are required General maintenance and repair experience Liquid tanker experience HM183 experience Pre-Employment Drug Screen and Background Check is required Benefits Complete benefits package includes: Full Family Health Insurance - Prescription Card, Dental, Vision 401K Retirement Plan/Company Match Profit-Sharing Paid Vacation & Holidays Boot Allowance Quarterly Tool Bonus Quarterly shop and safety bonuses Glove program Company-paid Training

Quality Inspector II (2 nd shift) Reports To: Quality Assurance Manager (278) Summary: Tests and inspects products at various stages of production process and compiles and evaluates data to determine and maintain quality and reliability of products. Job Functions: Selects products for tests at specified stages in production process, and tests products for variety of qualities, such as dimensions, performance, and mechanical, electrical, or chemical characteristics. Records test data per inspection plans, applying statistical quality control procedures if appropriate. Evaluates data and writes reports to validate or indicate deviations from existing standards. Recommend modifications of existing quality or production standards to achieve optimum quality within limits of equipment capability. Maintains and reviews inspection data in SPC software. Analyzes capability and determines appropriate actions for deviant conditions. Set up and perform destructive and nondestructive tests on materials, parts, or products to measure performance, life, or material characteristics per blueprint and/or customer specific requirements. Prepare graphs or charts of data or enter data into computer for SPC analysis. Performs in-process inspection and first-piece approval of parts utilizing OGP, Keyence, CMM, comparator and /or hand instruments, gages and fixtures. Set up and run CMM, Keyence and OGP programs on new launches, existing production, prototypes, tooling and other items as directed. Accurately interprets blueprints including all GD&T symbols and utilizes information when inspecting parts. Perform raw materials and outside services inspection including physical verification of dimensions and gages. Review of all specific documents, standards and clauses indicated on the purchase order. :Job Requirements Requires a High School diploma. Working knowledge of Word, Excel, email, and familiarity with manufacturing ERP systems. Be able to work overtime after the regular shift for additional inspection coverage if requested. Reading, writing and math skills at a high school level. Ability to interact with other team members to communicate product or program feedback, information and issues. Near acuity and accommodation are required for reading machine dial gauges, blueprints, and precision measuring instruments used in the inspection of parts. Understanding and applications of GD&T from drawings and/or customer specifications. Working Conditions: the employee is subject to: High noise levels from operating machines. Physical hazards from moving equipment and machine parts. Breathing fumes, dust and mist. Skin exposure to oils and cutting fluid. Required to stand, walk, push, pull, reach overhead, and bend to the floor. Required to exert up to 10 to 20 pounds of force constantly to move objects.

At Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work - and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history. At Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work - and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they are making history. The **Inspector 2 or 3** position is full-time on-site in **Rolling Meadows, IL** and will support the **Specialized Tactical Electronic Warfare Systems** **(STEWS)** program in the Integrated Mission Solutions (IMS) Operating Unit, within the Northrop Grumman Defense Systems sector. This location primarily supports the design, delivery, and sustainment of embedded software and mission planning systems on various airborne platforms. The Quality and Mission Assurance organization is chartered with providing the skills and experience required to support a robust Quality Management System (QMS) designed to ensure products and services meet or exceed internal and external customer requirements and promote mission success. **Basic Inspector 2/3 Responsibilities include:** + Perform both visual, mechanical and documentation reviews on all products (Electronic units and sub-assemblies, precision electro-mechanical assemblies, mechanical units, and sub-assemblies. + Perform incoming inspection, in-process, and final test reviews on all production items to ensure conformance to all drawing requirements; NGC Quality Management System (QMS) requirements in support of Production Contracts, purchase orders and/or internal work instructions. + Understand and utilize predetermined inspection methods (Blueprints, diagrams, dial indicators, micrometers, scales, fixtures, customer specifications, drawings or inspection instructions and checklists) to verify products meet various requirements. + Perform both visual and mechanical inspections and verifications on all purchased parts, components, and systems for all program initiatives. + Maintain records of results of all inspections, logs, write reports and other related activities utilizing approved documentation collection methods. + Witness test verifications and sell-off of assets through the verification of standards, use of test/monitoring equipment, test data sheets, drawing requirements and other approved documentation. + Perform in-process audits to ensure product meets requirements + Receive input regarding suggested process changes in support of efficiency, and to improve productivity. + Monitor compliance to requirements (ESD, safety glasses; use of personal protective equipment (PPE); ear protection, etc.). + Other relevant duties as assigned by the program. **Inspector 2 Basic Qualifications:** + High School diploma or equivalent and 2 years additional education and/or related inspection experience + Knowledge with IPC-STD 001 or similar industry standard requirements + Soldering, repair, assembly and inspection experience + Experience working in a dynamic, high-paced environment. + Able to move and position objects weighing up to 50 lbs. + Must have the ability to obtain and maintain a US Department of Defense (DoD) secret security clearance. + Must be able to work daily on-site in Rolling Meadows, Illinois. + This position requires analytical skills and attention to detail. + Intermediate knowledge of Microsoft Office Tools **Preferred Qualifications:** + Active Secret Clearance + Formal IPC-STD 001 training **Inspector 3 Basic Qualifications:** + High School diploma or equivalent and 4 years additional education and/or related inspection experience + Knowledge with IPC-STD 001 or similar industry standard requirements + Soldering, repair, assembly and inspection experience + Experience working in a dynamic, high-paced environment. + Able to move and position objects weighing up to 50 lbs. + Must have the ability to obtain and maintain a US Department of Defense (DoD) secret security clearance. + Must be able to work daily on-site in Rolling Meadows, Illinois. + This position requires strong analytical skills and a high level of attention to detail. + Advanced knowledge of Microsoft Office Tools **Preferred Qualifications:** + Active Secret Clearance + IPC-STD 001 Certification + Experience with AS9100 standard requirements + Must be able to pass formal classroom training to include but not limited to solder inspection, ESD, AS9100 auditing, etc Primary Level Salary Range: $49,100.00 - $81,800.00 Secondary Level Salary Range: $58,300.00 - $97,100.00 The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions. Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. Employees in Vice President or Director positions may be eligible for Long Term Incentives. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business. The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates. Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO and pay transparency statement, please visit *********************************** U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.

Job Posting Start Date 01-20-2026 Job Posting End Date 02-23-2026Flex is the diversified manufacturing partner of choice that helps market-leading brands design, build and deliver innovative products that improve the world.A career at Flex offers the opportunity to make a difference and invest in your growth in a respectful, inclusive, and collaborative environment. If you are excited about a role but don't meet every bullet point, we encourage you to apply and join us to create the extraordinary.Job Summary To support our extraordinary teams who build great products and contribute to our growth, we're looking to add a Quality Control Inspector located in Buffalo Grove, IL Reporting to the manager the potential candidate would inspect electronic systems, assemblies, subassemblies, components and parts for conformance to specifications. 0600am-0600pm Rotating Shift Responsibilities: Performs visual inspection of electronic card and sub-assemblies, and systems or units to ensure that all product meets the established specifications for reliability and workmanship. Utilizes gages, templates, microscopes and other manufacturing aids to ensure that all product meets the established specifications for reliability and workmanship. Ensures that all required process operations have been performed on the product that is being inspected. Enters all quality data into the appropriate electronic or manual systems. Notifies the appropriate personnel if unusual product defects are identified or if process falls below acceptable levels. Provides timely feedback to manufacturing if non-conforming product is identified. Accurately completes all administrative activities associated with quality inspection. Performs process audits and assists manufacturing with the interpretation of the quality and workmanship standards. Assists with the disposition of all non-conforming materials/product. Qualifications: Completion of a high school degree or equivalent is preferred. Successful completion of company provided training may be required. Typically requires 1year of related experience. AW20 What you'll receive for the great work you provide: Full range of medical, dental, and vision plans Life Insurance Short-term and Long-term Disability Matching 401(k) Contributions Vacation and Paid Sick Time Tuition Reimbursement Pay Range (Applicable to Illinois)$18.33 USD - $24.75 USD HourlyJob CategoryQuality Is Sponsorship Available? NoFlex is an Equal Opportunity Employer and employment selection decisions are based on merit, qualifications, and abilities. We do not discriminate based on: age, race, religion, color, sex, national origin, marital status, sexual orientation, gender identity, veteran status, disability, pregnancy status, or any other status protected by law. We're happy to provide reasonable accommodations to those with a disability for assistance in the application process. Please email accessibility@flex.com and we'll discuss your specific situation and next steps (NOTE: this email does not accept or consider resumes or applications. This is only for disability assistance. To be considered for a position at Flex, you must complete the application process first).

Temp Key Responsibilities: Inspection of incoming and outgoing products and materials to engineering and specifications using basic test and measuring equipment. Ability to work with handheld gauges, such as calipers, micrometers, height gauges, and pin gauges. Ability to work with an optical comparator. Able to read and interpret blueprints. Knowledge of GD&T is a plus. Experience with engineering drawings and tolerances, standards, and specifications. Upload your resume or send it to ***************** Benefits Offered: 401(K) 401(K) matching Dental, Vision, Life, and Health insurance (after 60 days) Paid Time Off/ IL Plawa Qualifications: 1- 2 Years of experience performing close/tight-tolerance mechanical inspections required.

Job Description Join a fast-growing manufacturing team as a Quality Inspector and play a critical role in ensuring precision, accuracy, and top-tier product quality. This is an excellent opportunity for someone with a job shop background who thrives in hands-on inspection work and wants long-term stability with strong overtime potential. What You'll Do: Perform detailed inspections on custom machined parts Verify dimensions and tolerances using micrometers, calipers, and precision tools Interpret mechanical blueprints to ensure compliance with specifications Document inspection results and flag non-conforming parts Collaborate with machinists and engineers to resolve quality issues Support production by ensuring only quality-approved parts are released What We're Looking For: 3-5 years of quality inspection experience in manufacturing Strong background inspecting machined components Proficient with precision measuring instruments Skilled in reading and interpreting mechanical blueprints Experience working in a custom job shop environment High school diploma or GED (trade or associate degree a plus) Comfortable in a fast-paced, high-mix production setting Open to contract-to-hire and overtime Why This Role Stands Out: Consistent overtime opportunities to boost your earnings Stable company with a rapidly expanding workload, especially in data center projects Long-term career potential with contract-to-hire structure Day shift schedule for work-life balance If you're detail-driven, mechanically inclined, and ready to grow with a busy manufacturing operation, this role offers both stability and strong earning potential.

This is a Part-Time Lane Inspector Position. Opus is a world-leading vehicle inspection and intelligent vehicle support company that has been contributing to a safer and cleaner world since the company was founded in 1990. We take pride in helping make our world a safer and cleaner place. Duties and Responsibilities: Lane Inspector - Vehicle Emissions testing. You will play an important role in limiting the production of Emissions by identifying the polluting vehicles. As a lane inspector, YOU will be responsible for the following: * Perform emission inspection functions following established procedures, and enter and verify vehicle information with computer data. * Operate vehicles during the emissions system test and use exhaust analysis equipment. * Direct motorists in and out of the station, provide test results, instruct customers on next steps in the inspection process, and collect inspection fees. * Other job duties as assigned. No experience required; we will train you! Requirements: * Must be 18 years of age. * Valid and unrestricted driver's license. * Physically able to stand, bend, stoop, kneel, and balance unassisted for extended periods of time. * Physically able to lift, push, and pull up to 20 lbs on an occasional basis. * Basic computer skills. * Saturday availability required - (State & Program Specific) * Part-time hours requirement is between 20 - 30 hours a week. - (State & Program Specific) Qualifications: * Team player. * Excellent customer service skills. * Ability to work efficiently and multitask in a fast-paced, busy shop environment with a smile and positive attitude. * Work in an environment that includes vehicle exhaust fumes, noise, and heat. * Work in all weather conditions. * Work safely around operating motor vehicles. All offers of employment are contingent upon completing and meeting the criteria of a background check, drug screening, and I-9 verification.

Why Choose Us? Novolex is a leading manufacturer of food, beverage, and specialty packaging that supports multiple industries including foodservice, restaurant delivery and carryout, food processing, grocery and retail, and industrial sectors. Novolex manufacturing and sourcing expertise spans a diverse range of substrates including resin, paper, molded fiber, aluminum and more. We provide customers a broad array of stock and customized solutions with 120 product categories, 250 brands and over 39,000 SKUs. Our Sustainability Commitment The Novolex sustainability vision is built upon three pillars: our products, our operations and our people. Each is critically important to our growth and future as a business. These pillars form the foundation of our company-wide commitment to sustainability, helping us achieve our ambitious goals through our wide-ranging initiatives. Responsibilities Quality Auditor|Woodridge, IL Comprehensive Compensation Package: Starting Pay Rate: $22.17 per hour - Paid Weekly Shift: Monday through Friday 7:00pm to 7:00am Novolex Career Advancement Opportunities: On-the-job Learning Certification Programs Coaching and Mentoring Training Programs Leadership Development Programs Online Learning Opportunities Quality Auditor - Essential Functions and Responsibilities Adhere to Safety Policies, Procedures, Rules and Regulations Adhere to Novolex HR Policies and Procedures Proficient in plant product testing methods with the requirement to train QC Inspectors Proficient in evaluation, maintenance, and repairs of the testing equipment Evaluate test results and inspection reports, perform follow-ups with QC Inspectors and Operators Report on relevant quality metrics, highlight trends and communicate to supervisors Ensure appropriate decisions are made regarding the quality characteristics of products, materials, and testing equipment Collect data related to internal product nonconformities including packaging materials. Communicate results with affected departments Coordinate, perform, and lead inspections of suspect products in warehouses, including reporting results to Quality Manager Coordinates 3 rd party product testing and customer sample requests Coach QC Inspectors and Operational team regarding Product Safety, GMP, 3 rd party audits Active participation/ assistance during New Product Development trials Proficient in Maintenance Work Order entry Deliver product characteristics training for New Hire Employees Schedules, plans, and performs assigned and delegated tasks efficiently with minimal supervision Contribute to the plant Quality and Process improvement initiatives, including PEPS Active participation in Monthly GMP audits, trained as an Internal Auditor (various types of audits) Education and Experience: HS Diploma or equivalent, college degree preferred, or equivalent combination of education and work experience 3-5 years of experience in quality function within a manufacturing environment Good written, verbal, mathematical, basic metrology, and analytical skills Must be diligent, accurate, and comfortable using Microsoft applications Ability to work independently as well as working with others effectively Maintain the ability to work a flexible schedule across shifts to support various projects Bilingual Required - English and Spanish Qualifications What You'll Get From Us Benefits With safety as our top priority and a commitment to employee well-being an important focus, we offer comprehensive and competitive benefits that include medical, dental and vision insurance as well as a variety of other well-being resources focused on mental, physical and financial health. Specific benefits and well-being programs may vary depending on where you work. Community Engagement At Novolex, giving back to the local communities that support us is important. Our Focused Giving Program prioritizes support for organizations whose missions promote sustainability initiatives or address food and hunger needs. We also encourage facility level support of activities in the communities where our employees live and work. Training and Development We offer constant opportunities for advancement. From skills development to advanced education programs, training and development programs and courses are available through MyLearning. Programs include company and industry training curricula, support for formal education through the Tuition Reimbursement Program, and a Learning Management System that supports and enhances employee skills at all levels of the organization. Novolex is committed to providing equal employment opportunity in all employment practices, including but not limited to selection, hiring, promotion, transfer, and compensation to all qualified applicants and employees without regard to age, race, color, national origin, sex, pregnancy, sexual orientation, gender identity, religion, handicap or disability, genetics, citizenship status, service member or veteran status, or any other category protected by federal, state, or local law. Any individual who, because of his or her disability, needs an accommodation in connection with an aspect of the Company's application process should contact my **********************.

This Seasonal Boundary Inspector position supports Law Enforcement by assisting with the encroachment program and conducting boundary and site inspections throughout the district. The role combines fieldwork, public interaction, and data collection to help ensure that preserves remain safe, well maintained, and compliant with district rules. What You'll Do Conduct inspections of preserve boundaries, water control structures, facilities, and amenities. Provide information to the public regarding encroachment rules, safety guidelines, ordinance interpretation, and general preserve use. Maintain accurate documentation, including encroachment reports, photographs, and related records. Operate a District passenger sedan to travel between inspection sites. Use hand tools such as shovels, metal detectors, pruners, and hand saws to support inspection needs. Collect and record geographic data using GIS and GPS equipment and software. Follow all safety rules and support a clean, hazard-free working environment. Demonstrate strong customer service when interacting with internal and external stakeholders. What You'll Need 18 years of age or older at time of hire. Valid Driver's License in good standing. Ability to deal effectively with the public. Working knowledge of GIS and GPS devices and software. Strong record keeping and organizational skills. Strong verbal and written communication skills. Ability to prioritize tasks and manage time independently. Comfortable working in wilderness and in remote areas. Schedule & Pay Wednesday - Friday. This position starts around May of 2026 and works until the end of October. $18 - 20 per hour Work Setting Position is based out of the Headquarters facility in Wheaton, IL and requires frequent travel to Forest Preserve sites across the district. Uniform and shirt will be provided. Boots and long pants are required for walking through uneven and forested terrain. Apply Today Follow the link to apply directly and be considered for the position. Additional information about the position and job duties can be found in the attached job description or on our website. The Forest Preserve District of DuPage County is an equal opportunity employer.

**Department:** Recovery **This is not for immediate hire.** Candidates for the **Site Inspector** position will be considered for our internal Recovery Cadre pipeline. Individuals we have added to this internal Recovery Cadre pipeline will receive first consideration for future openings that align with their skillset and interests. **If you are interested in active open positions where we would be looking at immediate hire, please review the other openings on our website.** The **Site Inspector** will be responsible for tasks related to the inspection and documentation of disaster effected facilities and infrastructure. The Site Inspector will work as part of a team and support disaster recovery efforts. **Responsibilities for the Site Inspector Include:** + Performing site inspections of storm-damaged facilities and related infrastructure. + Reconciling scope captured in federal grants with the work completed in the field (as identified by the site inspection). + Documenting storm-related damages and development of detailed damage descriptions and dimensions and scopes of work. + Coordinating with grant managers and the Project Management Team (PMT) to close out federal grants. **Qualifications for the Site Inspector Include:** + A basic understanding and knowledge of the Federal Emergency Management Agency (FEMA) Public Assistance (PA) Program. + Prior experience completing site inspections, field reports, etc. + Prior experience in Permanent work or Category C-G. + Working knowledge of FEMA PA Laws, Regulations & Policy. + Bachelor's degree required, or 4 years of related work experience in lieu of degree. **Compensation for the Site Inspector Includes:** + Salary range of $85,000 - $125,000. Compensation decisions depend on a wide range of factors, including but not limited to skills, experience and training, licensure and certifications, internal equity, location, travel requirements, and other business and organizational needs. + Comprehensive benefits program, including health/dental/vision insurance, 401(k) retirement plan, flexible spending accounts (FSA) for health and transit/parking, short- and long-term disability insurance, life insurance, paid time off, holidays, sick leave, and more. Hagerty Consulting is an Equal Opportunity Employer. We welcome applications from a wide range of candidates, and all qualified applicants will receive consideration for employment without regard to race, color, ethnicity/national origin, gender, sexual orientation, gender identity or expression, pregnancy, religion, age, disability, marital status, military status, genetic information, or any other status, characteristic, or condition protected by local, state, or federal law. We promote equal opportunity in all our employment decisions, including but not limited to recruitment, hiring, compensation, training, promotion, demotion, transfer, lay-off and termination, and all other terms and conditions of employment. For our privacy notice to California residents regarding the collection of personal information, please clickhere (***************************************************************************************** .

Quality Inspector 2nd shift 🕒 Monday-Thursday | 3:30 PM - 2:00 AM (3-day weekends!) 💲 Pay: $18 - $25/hour (based on experience) ✨ Full Benefits Package after 60 days 🔎 Ludlow uses E-Verify to confirm work eligibility in the U.S. Do you take pride in details and have a passion for quality? Do you have experience in a manufacturing, (sheet metal, welding) environment? Join our team as a Quality Inspector and play a key role in ensuring our products meet the highest standards. This role is perfect for someone who enjoys hands-on work, problem-solving, and making a real impact in a fast-paced manufacturing environment. What You'll Do Inspect materials, in-process, and finished products Use precision tools (calipers, micrometers, gauges, etc.) Document results and maintain quality records Support continuous improvement and ISO 9000 standards Inspect parts and assemblies to ensure they meet blueprint and customer specifications What We're Looking For Required Skills & Experience 3-5 years of experience in a quality inspection role within manufacturing (sheet metal, welding, or related environment) Strong ability to read and interpret blueprints, drawings, and manufacturing prints Proficient in using measuring tools (calipers, micrometers, height gauges, etc.) Familiarity with ISO 9000 standards and Statistical Process Control (2-3 years) High school diploma or equivalent Proficiency in Microsoft Office (Outlook, Word, Excel, PowerPoint) Excellent communication, problem-solving skills, and knowledge of manufacturing processes Hands-on metal fabrication experience Preferred Skills (a big plus!) Certified AS9100 Internal Quality Auditor Six Sigma Green Belt or Black Belt CMM experience Bilingual (Spanish) Why You'll Love Working Here We believe in taking care of our team. Our comprehensive benefits package includes: Medical, dental, and vision insurance IRA with company match Life insurance, short- and long-term disability Legal, identity theft, and wellness programs Critical illness, hospital indemnity & accident insurance Paid time off, holiday pay, and floating holidays This is more than just a job-it's an opportunity to grow your skills, be part of a supportive team, and make a difference every day. 👉 Apply today and bring your expertise in quality to a company that values precision, integrity, and innovation.

We are a fast, flexible and dynamic, system-based strategic partner of the health and beauty industry for over 30 years. We specialize in the development, manufacturing and distribution of the world's most noticeable personal care and OTC drug products. We're seeking a highly driven, dynamic, motivated Quality Inspector - to join our dynamic team. Position Overview: Under general supervision, quality inspections and testing of all incoming packaging components in accordance with established procedures. If you are a highly motivated self-starter who excels in a fast-paced, competitive environment with limitless potential - Apply now! Responsibilities: Sample using Z1.4 testing tables and cGMP practices. Verify the identity and quantity of the material against receiving documents and other relevant documentation provided. Test incoming material utilizing all required equipment and instrumentation. Ensure that the samples meet Voyant beauty's Acceptable Quality Limits (AQL) criteria. Maintain incoming log of materials received and all associated paperwork Disposition according to our established AQL criteria once all testing has been completed All materials must be properly labeled in accordance with the determined disposition Maintain work area to the outlined 5S established for the location Maintain all laboratory equipment and ensure timely calibration where required. Follow all cGMP and safety requirements and procedures. Other responsibilities as assigned by Quality Management. Skills and Qualifications: High school Diploma or GED preferred. Minimum one year experience in a fast-paced cGMP manufacturing environment and demonstrated consumer goods product knowledge. Basic Math skills including but not limited to addition, subtraction, division, multiplication and percentages required. Must have proven ability to read, write and communicate in English. Ability to work in a change oriented, fast-paced environment. Strong, Consistent, reliable attention to detail and ability to work independently. Flexibility to work OT when necessary - including weekends. Compensation & Benefits Disclosure At Voyant Beauty, we are committed to transparency in our hiring process in compliance with applicable pay transparency laws. The base compensation for this position is described in the above posting. This position is also eligible to participate in our short-term incentive (bonus) plan. For hourly positions, a shift premium may apply based on the assigned work schedule. We provide eligible full-time employees with a comprehensive benefits package that includes medical/Rx, dental, and vision insurance options, along with applicable flexible and health spending accounts (FSA/HSA). In addition, we also offer options for life and AD&D insurance (basic and supplemental) along with short- and long-term disability insurance (basic and supplemental). Other supplemental benefit options include accident, hospital indemnity, and critical illness insurance along with identity theft protection. Employees can take advantage of a 401(K)-retirement savings plan with company match, paid vacation, paid sick time, paid holidays, and education reimbursement. This comprehensive benefits package is designed to offer valuable support for you and your family's health, financial security, and work-life balance. Specific benefits and eligibility may vary by location. For further information, please contact a member of our hiring team.

Quality Inspector - 1st Shift (Manufacturing) A well-established manufacturing operation is seeking a Quality Inspector to support inspection of machined parts and assemblies in a fast-paced production environment. This role is ideal for someone who is hands-on, detail-oriented, and comfortable working directly with measurement tools on the shop floor.Responsibilities Inspect machined parts to ensure conformance with specifications and tolerances Use precision measuring instruments including micrometers, calipers, gauges, and related tools Read and interpret engineering drawings, measurements, and tolerances Perform in-process and final inspections Document inspection results and communicate issues to production and quality teams Support quality standards and continuous improvement efforts Requirements Prior experience as a Quality Inspector in a manufacturing or machining environment Strong understanding of measurement instruments and how to properly use them Ability to read prints and understand tolerances on machined parts (required) High attention to detail and consistency Comfortable working in a production/shop environment Schedule & Compensation 1st shift Good amount of overtime available Pay up to $27-$28/hr, depending on experience Why Consider This Role Stable manufacturing environment Consistent overtime opportunities Hands-on inspection work (not a desk-only role) Competitive hourly pay for experienced inspectors Qualified applicants will receive consideration for employment without regard to race, color, age, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or genetic information. #inauto

Inspector Pay: $18 - $21/hour (based on experience) Schedule: Monday - Friday | 6:45 AM - 3:30 PM Employment Type: Full-Time We are seeking a reliable and detail-oriented Inspector to join our team at our Racine location. This role involves interacting with the public, operating a kiosk-style computer system (similar to a fast-food self-order screen), and performing inspections as part of our daily operations. Forklift operation experience is required.. Key Responsibilities: Greet and interact professionally with the public during inspections Use a kiosk-style touchscreen computer system (no cash handling involved) Perform inspection tasks efficiently and accurately Operate a forklift safely to move or position materials as needed Maintain cleanliness and organization in the inspection area Follow all safety protocols and company procedures Report any equipment or process issues to supervisors promptly Qualifications: Previous experience in an inspection, general labor, or customer-facing role preferred Ability to operate a forklift (certification preferred or willingness to obtain) Comfortable using a touchscreen or kiosk-style computer Strong communication and interpersonal skills Reliable and punctual with a strong attention to detail Bilingual (English/Spanish) is a plus

The Warranty Inspector will be expected to ask questions when they are uncertain of findings and communicate issues they find with our processes and various systems. The WI will experience transmission builders with broad range familiarity with a variety of different transmission families. ETE is looking for someone who has the desire and capability to continuously learn new information about transmissions as well as new systems used to perform inspections. About ETE REMAN ETE REMAN is the largest independent aftermarket automatic transmission remanufacturer in the United States. Based in Milwaukee, Wisconsin, we've been rebuilding transmissions since 1985 - and we're still growing strong. With more than 800 team members, ETE REMAN is a place where people can build their career, learn new skills, and be part of a team that wins together. Why Choose ETE REMAN? The demand for our transmissions remains strong no matter the economy. Our work reduces waste, keeps vehicles on the road, and helps customers save money. ETE REMAN is for people who take pride in their work and want to create something real. We're a team that values quality, honesty, and getting better every single day. You'll find opportunity here - if you're ready to learn, grow, and go all-in. The pace is fast. The expectations are high. And the roadmap? You'll help draw it. We're growing quickly, built to last through any market, and still grounded in our family-owned roots. That means you get the best of both worlds - a tight-knit, no-nonsense culture with room to advance and make your mark. Company Expectations At ETE REMAN, we expect every team member to: Bring a positive attitude and support your teammates Focus on quality and keep customer satisfaction at the center of everything you do Follow established policies and processes, while staying flexible as things evolve Show up on time, stay engaged, and work with passion, urgency, and focus Aim to not only meet but exceed goals Make continuous improvement a daily goal Essential Duties and Responsibilities: Communicate discovery of components within units that are not listed in the family inspectable component lists Use Trello to communicate specific issues to and tag appropriate Trello users Use of Salesforce inspection system to record findings Teardown and inspection of 4-5 transmissions per day Maintains safe and healthy work environment by following standards and procedures and complying with legal regulations. Examines and inspects defects of the transmission and determines cause of failure. Understands basic theory and operation of the Transmission. Perform administrative and other Quality related support tasks as requested. Qualifications: Transmission building and/or inspecting experience Have a Can-Do Attitude, with good time management, and decision-making skills Self-starting and motivation; believe in teamwork and uphold the ability to always help otherS Must embrace ETE's core values. Strong written and verbal communication skills Working knowledge of basic computer systems, including email systems Willingness and commitment to continued education

QIS is a national leader and a trusted partner of choice for public housing authorities who demand product and service excellence. After conducting more than 2,000,000 inspections across the nation, QIS understands the unique needs of the housing industry and the flexibility needs of our employees. Corporately based in beautiful Chattanooga, Tennessee, QIS is an American company and proudly operating as a woman and veteran owned enterprise. QIS services include: HQS Inspection Services UPCS Inspections SEMAP Reviews PHA Policy Consulting HCV Program Management Services Remote Recertification Services Rent Reasonableness Studies Rent Determination and Negotiation Job Description We are seeking a part-time Inspector. We are NOT seeking temporary employees. ****If you are looking for a temporary position, please do not apply.**** Partnering with the Director of Field Operations, the position of the HQS Inspector will conduct HQS inspections on a Part-Time basis - you tell us what is best for your life/work balance, and if we can accommodate you we will! Your scope is to follow the guidelines of HUD's Housing Quality Standards and the contracted Housing Authority's administrative plan. All inspector candidates are required to complete online and field training as well as successfully passing the final HQS certification exam before being considered for the team. Major Duties and Responsibilities 1. Pull schedule and inspection information for upcoming work shift. 2. Conducting inspections of HUD and Section 8 properties 3. Collect and transmit data using the hand-held tablet (2 lbs.). 4. Safely travel between inspections. Qualifications Required Knowledge, Skills and Abilities Excellent interpersonal skills. Moderate to excellent computer ability. Current driver's license. Must be available to drive during all working hours. Have dependable transportation and maintain adequate automobile liability insurance on vehicle used to perform job. Knowledge of the general operations and procedures of a Public Housing Agency (PHA) and of local, state, and federal regulations governing subsidized housing programs is a big plus. Proven proficiency of modern equipment including cell phones, tablets, scanners, printers, computers, GPS or other hand-held devices. Prepare and present ideas in a clear and concise manner, both orally and in written form. Establish, maintain and promote effective working relationships with departmental employees, co-workers, vendors, consultants, contractors and landlords/tenants; display ability to effectively communicate with people from a broad range of socio-economic backgrounds. Ability to work productively in a variety of working conditions and environments. Ability to complete QIS' HQS training program and pass the final certification exam. Physical Demands: Moderate work: Must have the ability to walk 3-5 miles per day, bend and stoop, climb stairs, carry a 2 lbs. tablet and make observations in all levels of lighting. Minimum Education High School diploma or GED. Completion of Inspector Training Classes, achievement of lead-based paint visual assessment course or other HQS certification exams in the past is a big plus. Additional Information All positions are PRODUCTION-BASED (based on completed inspections) , so be prepared to discuss the best production schedule for your current needs to ensure a proper “life/work balance”. Based on average production levels, you can earn approximately $20-$25 most hours. BENEFITS - Dental and vision insurance is available for all level of inspectors. Inspectors classified as full-time will be eligible for paid vacation, employee health insurance, and nine paid holidays.

Job Title: Quality Control Inspector Department: Quality Reports to: Quality Control Manager Classification: Non-Exempt Travel: None GWS is the North American leader in the design and manufacturing of custom cutting tools. Servicing industries including Aerospace, Automotive, Medical, Energy and general Engineering. As the fastest growing company in our industry, the career opportunities are numerous and the pathways for advancement nearly limitless. Entry-level position with limited prior training or relevant work experience. Has basic skills to perform routine tasks. Works within clearly defined standard operating procedures. Works with either close supervision or under clearly defined procedures. Job Summary: The Quality Control Inspector is responsible for ensuring that all products meet customer and company standards by inspecting end mills and form tools at the end of production. Responsibilities include inspection and test of product, process audits and disposition of non conforming product. Coordinating the use, calibration, and servicing of all inspection equipment. Duties/Responsibilities: Inspect cutting tools manufactured within extremely tight tolerances. Examine tools for proper geometry within blueprint specifications. Compare quantity and part number of items received with procurement data and other specifications to ensure completeness of and accuracy of order. Approve or reject items, and record inspection and disposition data. Inspect incoming raw material, thin film coating, vendor supplied tooling, grinding wheel geometric configurations and final inspections. Prepare inspection procedures for reference use in subsequent inspections. Run inspection programs for in-process process and final inspection. Assist in etching product identifications. Other duties as assigned. Education and Experience: High school diploma or general education degree (GED) or 1-3 years industry related experience and/or training. Certification from a qualified training institution in the field of tool and cutter grinding is ideal but not required. Manufacturing experience is required. Strong geometry knowledge is required. Experience with hand gauges and non contact-contact inspection equipment is required. Required Skills/Abilities: Ability to convert metric to inch and decimal to fractions. Strong analytical troubleshooting ability. Uses standard operating procedures to guide own work and solve standard problems. Applies basic skills to perform simple activities. Understands how the assigned duties relate to others in the team and how the team integrates with others. Uses communication skills to exchange information. Use assigned methods, tools and processes. Support sharing of best practices. Familiarity with navigating Windows based computer programs. knowledge of the gauge calibration process. Ability to read and comprehend blueprints. Knowledge of calipers, hand micrometers, and metrology equipment. Ability to work in a fast paced manufacturing environment. Involvement And Knowledge of the use of quality management system procedures, forms, work instructions, and certifications. All qualified applicants will receive consideration for employment without discrimination on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, age, genetic information, or any other factors prohibited by law.

Inbound Inspection is responsible for inspection of all inbound properties and freight. Essential Job Functions (listing most important first): Strictly follow all safety guidelines to ensure the safety of own self and other co-workers. Open crating and complete visual inspection of all inbound properties. Determine if repairs are needed and ensure the appropriate department is notified of repairs needed. Move, locate, relocate, stack and count property using a forklift. Loan and unload freight. Receive, identify, mark and place materials sent to the warehouse according to established procedures. Notify supervisors of problems that are not resolved. Responsible for the safe and efficient operation of the forklift. Required/Preferred Education and Experience: 1+ year previous experience preferred. Required/Preferred Skills/Training: Ability to read and interpret shop drawings. Ability to work within team AND on individual tasks Carpentry experience a plus Excellent verbal and written communication skills Certifications, Licensees or Registrations Required/Preferred: Forklift certification a plus Mathematical Skills: Ability to complete common mathematical operations Reasoning Ability: Strong ability to handle deadline pressures and multiple assignments Ability to interpret a variety of instructions furnished in written, verbal, diagram, or schedule form Physical Requirements/Work Environment: Must have the ability to lift and carry up to 60 lbs. on a regular basis Must have manual dexterity sufficient to reach/handle items, work with fingers and perceive attributes of objects and materials. Will be required to regularly stand, walk, stoop, bend, reach, push and pull.