Machine operator jobs in Wheaton, MD

The TSUBAKI name is synonymous with excellence in quality, dependability and customer service. U.S. Tsubaki Automotive, LLC is an international tier-one supplier of high-speed chain drive systems to the automotive industry. This role is responsible for set up and operation, changeover, adjusting and troubleshooting cold heading, cold forging, and bushing forming equipment used in the manufacture of bushing, rolls, pin cut-off for Automotive Timing Chain and Components, and following established work standards. Essential Duties and Responsibilities : The essential duties and responsibilities of this job are included but not limited to this job description - other tasks may be assigned and expected to be performed. Quality of all components is maintained by each machine operator using statistical quality control methods and defined in the work standard. Changeovers and adjustments exacting, but not difficult. Work to specifications, schedules, orders and general instructions of department group leader or supervisor. Perform preventive maintenance inspection before the start of each shift as outlined on the Preventive Maintenance Check Sheet. Apply oil or grease to specified areas. Confirm the operability of all detectors. The ability to perform a more comprehensive PM on the machines including but not limited to oil changes. Basic troubleshooting of chain assembly equipment to understand the alarm messages, identify what this issue is and how to correct the issue. Adhere to work standards and statistical quality control methods must be followed. Must have complete knowledge of the cold header equipment, cold forging, bushing forming, and pin cut-off work standards and SQC methods. Adhere to work standard. Responsible for maintaining production schedules, quality control records, and accurate reporting of production volumes. Refers any unusual problems to the departmental supervisor. Prepare test samples for quality control per work standard. Record production, traceability, and any other data required utilizing various forms as directed. Utilize machine-monitoring system to record down time. Use material handling devices such as hand truck, hydraulic lift truck. Maintain work area and equipment in a clean and orderly condition and follow standard safety regulations. Detect faulty operation or defective material and report these and other unusual conditions to group leader or supervisor. Perform other similar and associated duties as required or directed. Requirements: High school diploma or equivalent preferred; equivalent relevant experience may be considered 2-5 Years of experience running multiple machines and performing preventative maintenance. Safety First mindset. Strong focus on Quality. Ability to work well in a team environment. Ability to work in a fast-paced environment. Must have good mechanical aptitude and problem-solving skills. Ability to use material handling devices such as hand trucks, and hydraulic lift trucks. Basic computer Skills. Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one on one and small group situations to customers, clients, and other employees of the organization. Ability to add, subtract, multiply, and divide into all units of measure, using whole numbers, common fractions, and decimals. U.S. Tsubaki offers: A competitive compensation package, including medical and dental benefits, life insurance, and generous 401(k) match and profit sharing. Paid vacation time Step increases Shift differential pay Weekly pay Tsubaki is an Equal Opportunity Employer - Minorities/Females/Veterans/Disability PM21 Compensation details: 24.29-26.92 Hourly Wage PI772aacd906bc-30***********1

The Machine Learning Engineer II will be a member of the Learning and Active Perception (LEAP) group in AV's MacCready Works division and support the development of a variety of innovative computer vision capabilities (object detection, classification, localization, and tracking) and other image/video analytics for defense and commercial applications. These development efforts require a range of skills and tools across traditional engineering, computer science, and mathematical disciplines including but not limited to data management, computer vision, machine learning, optimization, and deep convolutional neural networks. This position will span multiple stages of the development process including requirements gathering, algorithm design, prototyping, test and evaluation, and validation and verification testing. This specific role also involves on-site support for experimentation and fielded systems requiring a significant amount of extended travel, both domestic and international. Duties * Support development of computer vision and machine learning (ML) algorithms capable of object detection, classifying, localizing, and tracking objects of interest from a variety of stationary and mobile sensor platforms with the primary purpose of real-time automated target recognition (ATR) * Perform visual imagery data science to inform data collection, data labeling, and data selection for training deep computer vision ML algorithms, train the algorithms using the data, and validate data selection and algorithm design through a series of purpose-designed experiments. This includes: o Analyze ML algorithms to solve a given problem and rank them by their success probability on new data o Set objectives and develop models that help achieve them, along with metrics to track their progress o Select appropriate datasets and data representations o Analyze errors of the data, model, and design strategies to overcome them * Write and test software to support the integration of machine learning algorithms into aircraft (such as autopilots, payloads, or other functional components) or other systems * Other duties as assigned Experience * 2 - 5 years of relevant computer vision experience * Familiarity with Python and C/C++ required * Proficiency with a deep learning framework, preferably PyTorch * Proficiency with basic libraries for machine learning such as, Open-CV, scikit-learn, and pandas * Familiarity with Linux * Familiarity with Nvidia Tools (CUDA, JetPack, TensorRT) and deployment process to Nvidia GPUs * Demonstrated ability to troubleshoot complex systems and perform algorithmic optimization * Ability to perform exploratory data analysis, including visualizing and manipulating large datasets Education BS in any of the following fields: Computer Science/Engineering, Mathematics, Physics, or related Science or Engineering discipline with 2+ years of relevant experience in machine learning and/or computer vision. Additional Requirements * Must be a team player and collaborate effectively * Excellent verbal and written skills * Has effective problem-solving, analytical and interpersonal skills * Ability to work within defined requirements to complete tasks under moderate supervision * Able to excel in a fast-paced, deadline-driven environment, where small teams share a broad variety of duties * Displays strong initiative and drive to accomplish goals and meet company objectives * Takes ownership and responsibility for current and past work products, and demonstrates a willingness to share the results with other team members and provide feedback and input to teammates working similar problems. * Is committed to learning from mistakes and driven to improve and enhance performance of oneself, others, and the company * Familiarity with office software and computer-based productivity tools Physical Demands * Ability to work in office and field environments (Constant) * Required to sit and stand for long periods; talk, hear, and use hands and fingers to operate a computer keyboard (Frequent) Special Requirements * U.S. Citizenship required * Active Secret level (or higher) DoD security clearance * Willingness and ability to travel CONUS and OCONUS (Frequent / 50%+) including extended stays up to 60 days Clearance Level No Clearance The salary range for this role is: $102,708 - $145,530 AeroVironment considers several factors when extending an offer, including but not limited to, the location, the role and associated responsibilities, a candidate's work experience, education/training, and key skills. ITAR Requirement: This position requires access to information that is subject to compliance with the International Traffic Arms Regulations ("ITAR") and/or the Export Administration Regulations ("EAR"). In order to comply with the requirements of the ITAR and/or the EAR, applicants must qualify as a U.S. person under the ITAR and the EAR, or a person to be approved for an export license by the governing agency whose technology comes under its jurisdiction. Please understand that any job offer that requires approval of an export license will be conditional on AeroVironment's determination that it will be able to obtain an export license in a time frame consistent with AeroVironment's business requirements. A "U.S. person" according to the ITAR definition is a U.S. citizen, U.S. lawful permanent resident (green card holder), or protected individual such as a refugee or asylee. See 22 CFR § 120.15. Some positions will require current U.S. Citizenship due to contract requirements. Benefits: AV offers an excellent benefits package including medical, dental vision, 401K with company matching, a 9/80 work schedule and a paid holiday shutdown. For more information about our company benefit offerings please visit: ********************************** We also encourage you to review our company website at ******************** to learn more about us. Principals only need apply. NO agencies please. Who We Are Based in California, AeroVironment (AVAV) is a global leader in unmanned aircraft systems (UAS) and tactical missile systems. Founded in 1971 by celebrated physicist and engineer, Dr. Paul MacCready, we've been at the leading edge of technical innovation for more than 45 years. Be a part of the team that developed the world's most widely used military drones and created the first submarine-launched reconnaissance drone, and has seven innovative vehicles that are part of the Smithsonian Institution's permanent collection in Washington, DC. Join us today in developing the next generation of small UAS and tactical missile systems that will deliver more actionable intelligence to our customers so they can proceed with certainty - and succeed. What We Do Building on a history of technological innovation, AeroVironment designs, develops, produces, and supports an advanced portfolio of unmanned aircraft systems (UAS) and tactical missile systems. Agencies of the U.S. Department of Defense and allied military services use the company's hand-launched UAS to provide situational awareness to tactical operating units through real-time, airborne reconnaissance, surveillance, and target acquisition. We are proud to be an EEO/AA Equal Opportunity Employer, including disability/veterans. AeroVironment, Inc. is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Qualified applicants will receive fair and impartial consideration without regard to race, sex, color, religion, national origin, age, disability, protected veteran status, genetic data, sexual orientation, gender identity or other legally protected status. ITAR U.S. Citizenship is required. Secret or Top Secret clearance, or the ability obtain a clearance is desired.

Job Description Trans-Tech is the leading designer and manufacturer of RF and microwave components that help our world communicate, discover, create, protect, explore, and more. We supply advanced materials, ferrites and magnetic materials, dielectrics, ceramic bandpass filters, coaxial resonators, and coaxial inductors. Technical Operator Work Schedule: Two shifts available: 10:00 pm - 6:30 am Sunday-Thursday OR 6:00 am - 4:30 pm Thursday-Sunday. Training for both shifts will be 6:00 am - 2:30 pm Monday-Friday for 2-3 months. PRIMARY RESPONSIBILITY: Sets up and operates a variety of automatic or semi-automatic machines used in the production of the company's product. Works from process sheets or written/verbal instructions given by supervisor to perform production tasks. Checks and inspects operation against predetermined tolerances. An Ingot Operator's primary duties are to produce custom ceramic ingots through a variety of processing tasks that increase in complexity as experience and process knowledge is gained through mentorship and on the job training. The operator will interact with supervisory personnel and engineers to ensure that processes are performed in accordance with written and verbal instructions. Communication of processing parameters, non-standard observations and measurement results are essential for the success of the Ingot Operator and the operation. The basic processing operations are listed below, with the Ingot Operator performing one or more of the following: Ingot Forming Ingot Firing Ingot Diameter Lathing Ingot Length Lathing Ingot Inspection Ingot Packaging The Ingot Operator will maintain a clean, organized work area to minimize contamination potential. The operator will clean all equipment and the entire area prior to the end of each shift. Equipment used includes isostatic presses, periodic kilns, lathes, and various measurement devices. The operator must report any equipment malfunctions or repair needs to their supervisor or engineer. Requirements: High School diploma or equivalent Ability to regularly lift 10 lbs. and occasionally 55-60 lbs. Ability to work in dusty environments Standing 8 hours Ability to multi-task Must demonstrate safe work habits Operate under ISO 9001 and ISO 14001 requirements Work with attention to detail Maintain accurate electronic and written records Exposure to non-hazardous ceramic powders and liquids Work in a fast paced, high- volume environment Ability to work on self-directed teams Preferred competencies: Strong Computer literacy and skills Mechanical understanding to operate assigned tools and equipment Interpretation of process instructions Excellent manual dexterity Benefits include: Medical, Dental, and Vision Option to participate in 401(k) plan with safe harbor match Company-paid Life Insurance Vacation and sick leave Paid holidays Trans-Tech is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex, sexual orientation, gender identity or expression, national origin, disability status, protected veteran status, genetic information, or any other characteristic protected by law.

We have a wonderful opportunity for machine operators in Crofton, MD with a local manufacturer. QUALIFICATIONS Machine operator experience and mechanical skills Basic computer and math skills Ability to read and interpret documents such as safety rules, operating and maintenance instruction, and procedure manuals. Must be a self-starter and work independently and assist other operators to set up machines and any other necessary tasks to adhere to deadlines and completion of product. Must make sure all housekeeping is maintained in a clear and orderly fashion in assigned area. Must be able to maintain a high level of accuracy in all aspects of work assignments and apply common sense understanding to carry out instructions furnished in written, oral, and diagram form. Ability to work a flexible schedule, lift/move product up to 50lbs, and will be required to frequently stand on their feet for extended periods of time. ESSENTIAL DUTIES AND RESPONSIBILITIES Run manufacturing equipment safely and efficiently and follow supervisor's instructions and the company's safety policies to ensure that the products coming off the machine meet company standards for quality. Safety and consistency are top priorities. Review instructions that tell you what product is being made, what materials are needed, and how the machine should be set up. Will physically adjust the machine's measuring devices - like stops, guides, or rulers - to control the length, height, or thickness of the product being made. Will keep an eye (and ear) out for anything unusual - like strange noises, jams, or defective output and inspect the finished product to make sure it looks right and meets company quality standards. Will handle simple maintenance tasks - cleaning, lubricating parts, replacing worn components, or checking oil levels - to keep the machine running well. You may help coworkers adjust or prepare their machines, or jump in to handle general labor tasks (like loading materials or stacking finished products) to meet production goals and may occasionally be asked to handle extra tasks that support production - such as helping in another department, loading trucks, or completing paperwork. Will be responsible for keeping your workspace clean and organized - sweeping up debris, putting tools away, and ensuring materials aren't blocking aisles. HOURS: 5am-5pm, Monday through Thursday Or 5am-5pm, Monday through Saturday one week and Tuesday through Saturday the next. PAY: Pay ranges from $18 to $22 an hour depending on experience. #ISS

We are looking for a skilled Milling Operator to safely and efficiently operate asphalt milling machines on roadway, parking lot, and site development projects. This role is responsible for the setup, operation, and basic maintenance of milling equipment to ensure accurate surface removal and preparation for paving. The ideal candidate has strong equipment experience, attention to detail, and a commitment to safety and quality workmanship. Responsibilities Operate milling machines to remove asphalt pavement to specified depth, grade, and slope Set up equipment, including drum selection, grade controls, and conveyor adjustments Perform pre-shift inspections and routine maintenance to ensure equipment is in safe working condition Coordinate with ground crew and foreman for efficient material removal and loading Monitor milling depth, speed, and pattern to meet project specifications Maintain awareness of surrounding personnel, traffic, and utilities to prevent incidents Assist with machine cleaning and minor repairs as needed Complete daily equipment logs and inspection reports Follow all safety protocols and wear required PPE Assist with other site tasks when equipment is not in operation Perform additional duties as assigned Qualifications 2+ years of experience operating milling machines or other heavy equipment Must be at least 18 years of age Familiarity with grade control systems and milling machine adjustments Ability to read grade stakes, plans, and work orders Solid mechanical aptitude for troubleshooting minor equipment issues Strong communication skills and the ability to work effectively with the crew Valid driver's license required; CDL preferred Ability to work long hours, including weekends and evenings, as needed Must be willing to travel overnight when projects are outside the local area Work Environment Outdoor work in varying weather conditions, including heat and inclement weather Exposure to noise, dust, vibration, and moving equipment Requires standing, walking, climbing, and lifting up to 75 lbs To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Physical Requirements: (Each to have one of the following based on the position: Never, Rarely, Occasionally, Constantly) Remaining in a stationary position, often standing or sitting for prolonged periods: Constantly Moving about to accomplish tasks at a worksite or moving from one worksite to another: Constantly Moving self in different positions to accomplish tasks in various environments, such as stooping, kneeling, or crouching: Constantly Adjusting, moving and lifting objects in all directions: Constantly Talking and hearing to communicate with others: Constantly Seeing to perform job duties at close range, such as monitors or screens: Constantly Seeing to perform job duties at a distance, such as driving or operating equipment: Constantly Repeating motions that may include the wrists, hands and/or fingers: Constantly Ascending or descending ladders, stairs, scaffolding, ramps, poles and the like: Occasionally Operating machinery and/or power tools: Constantly Operating motor vehicles or heavy equipment: Occasionally The ability to travel regionally or nationally: Rarely Physical Demands: Sedentary work that primarily involves sitting/standing: Standing Light work that includes moving objects up to 20 pounds: Occasionally Medium work that includes moving objects up to 50 pounds: Constantly Heavy work that includes moving objects up to 100 pounds or more: Rarely Working Conditions: Low temperatures: Occasionally High temperatures: Constantly Outdoor elements such as precipitation and wind: Constantly Noisy environments: Constantly Hazardous conditions: Constantly Shift work, to include overnight work: Occasionally Frequent overtime, including weekends: Constantly Office environment: Rarely Pave America and it's companies offers a comprehensive, competitive, and inclusive set of health, financial and other benefits that support your total well-being. We are an Equal Opportunity Employer and comply with OFCCP regulations. All qualified applicants will receive consideration for employment without regard to sex, race, color, age, national origin, religion, physical and mental disability, genetic information, marital status, sexual orientation, gender identity/assignment, citizenship, pregnancy or maternity, protected veteran status, or any other status prohibited by applicable national, federal, state or local law. Pave America and it's companies promote a drug-free workplace. We will consider for employment qualified applicants with a criminal history in a manner consistent with the requirements of applicable laws regarding criminal background inquiries. In compliance with OFCCP requirements, we invite applicants to voluntarily self-identify their gender, race, and veteran status. Submission of this information is voluntary and refusal to provide it will not subject you to any adverse treatment. Advertised Max Pay Rate **(Make sure to change to Hourly if a non-exempt position)** USD $32.00/Hr. Advertised Min Pay Rate **(Make sure to change to Hourly if a non-exempt position)** USD $29.00/Hr.

Airbus is committed to providing reasonable accommodations as an Equal Opportunity Employer to applicants with disabilities. If you require assistance or an accommodation to complete your application, please contact us at ******************** Notice: Know Your Rights: Workplace Discrimination is Illegal Notice: Pay Transparency Nondiscrimination (English) Aviso: Transparencia en el Pago No Discriminación (Spanish) : Satair is looking for a Warehouse Operator to join our team based in Sterling, VA. This position is a temporary (contract) position with no specific time period but could be extended or shortened as needed. Contractors are employed by a 3rd party vendor and placed on assignment to Airbus in America. You will be part of the team responsible for moving items through and out of the warehouse in a safe and clean manner. Meet the team: In support of Warehouse Operations, our team members support everything from receiving to packing and shipping of materials. The warehouse is at the core of our operations, assuring that Team Airbus members and our customers get the materials they need to be successful. Your working environment: Located minutes away from the Washington Dulles International Airport, and approximately 30 miles from the U.S. Capitol, this site serves as our major parts distribution hub in the Americas. The facility is a 24/7 fulfillment center, with an Aircraft on Ground (AOG) support desk, and Quality Assurance (QA) operations. To best support our customers, our 20,000-square-foot warehouse features a brand new technology called Autostore, aiming at increasing productivity. At Airbus, we support you to work, connect and collaborate more easily and accessibly. Wherever possible, we foster flexible working arrangements to stimulate innovative thinking. Your challenges: The warehouse operation is 24 x 7, 365 days a year and will require shift work. Receive and inspect parts into the Satair Group IT Systems and put stock away in correct location. Pick and process orders in the correct priority sequence according to established performances targets; packing parts for safe shipment according to shipping instructions and applicable standard specifications (ATA300). Your boarding pass: A high school diploma or an equivalent combination of education and experience. Entry level warehouse experience Must be able to read, write, and speak English Physical Requirements: Carrying: Able to carry up to 50lbs Hearing: Able to hear to participate in phone and in-person conversations also able to hear sirens, alarms and other emergency signals. Lifting: Able to lift up to 50lbs - 125 lbs 2-person lift Pushing / Pulling: Able to push/pull items over short distances and on occasion. Sitting: Able to sit for long periods of time in meetings; drafting computer-based documents, sometimes with limited breaks. Speaking: Able to speak and conduct conversations often for extended periods of time in meetings, negotiations and training. Written Communications Able to provide user instructions and notifications in a clear, understandable manner either via messaging or printed documents. Squatting / Kneeling: Able to occasionally squat and and to replace or retrieve items from low storage. Standing: Able to stand for long periods of time, touring vendor facilities, traveling and similar activities. Citizenship: Authorized to Work in the U.S without current or future need for visa sponsorship. Take your career to a new level and apply online now! A full job description will be provided to candidates whom progress to interview stage or any candidate upon request. This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company's success, reputation and sustainable growth. Company: Satair USA, Inc. Employment Type: Agency / Temporary Experience Level: Entry Level Remote Type: On-site Job Family: Logistics ------ ------ Airbus provides equal opportunities to all individuals seeking assignment with Airbus without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetics, pregnancy, marital status, veteran status or other legally protected status. In addition to federal law requirements, Airbus complies with applicable state and local laws governing nondiscrimination in every location in which the company has facilities. Airbus expressly prohibits any form of workplace harassment based on race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetics, pregnancy, marital status, veteran status or other legally protected status. This assignment description does not constitute a written or implied contract of employment. By submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus. Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief. Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to ****************.

*English communication required* Hiring for 2nd & 3rd shift 2nd shift: 3:00p - 11:30p EST 3rd shift: 11:00a - 7:30a EST Must be able to train from 8:30am - 5:00pm EST for 1 month Flexibility to work Overtime is Required JOB SUMMARY The Production Operator performs functions relating to the processing of drug products, ensuring product compliance to established current Good Manufacturing Practices (cGMPs), customer requirements and in conjunction with all Standard Operating Procedures (SOPs). Follows standard procedures to complete tasks, some of which may vary in scope, sequence, complexity, and timing. Applies skills and knowledge to recognize issues and to increase efficiency, throughput, and quality. Understands and runs processes to meet the assigned standards/routers and fulfills the assigned schedule; when these are not achieved, participates in the debrief to understand the reasons why and what needs to be corrected moving forward. Assists in troubleshooting process issues. Responsible for the safe and efficient execution of job duties. Production Operator Trainee - Operator I Pay rate: $18 - $22 / hour Production Operator II - III (Skilled Operators)- must have OSD Manufacturing experience Pay rate: $22 - 33 / hour (Flexible based on experience) Key Accountabilities: Operates pharmaceutical production machinery and follows the procedures for manufacturing such as weighing, blending, dispensing, mixing, pellet coating, granulating, drying, milling, blending, compressing, Encapsulating, Coating, potent compound, etc. Meets the requirements for use of manufacturing equipment and other commonly used equipment per SOPs. Executes written SOPs to ensure the purity of materials involved in the manufacturing process. Properly uses all scales, including printouts, zeroing, setting tares, and daily calibration verification per SOPs. Examines manufacturer Product ID Labels, Quality Control release tags, and Batch Production Record to verify issued/staged raw materials can be released for production. Cleans manufacturing equipment and facilities according to established SOPs. Executes machine changeovers from batch to batch. May sample batches for quality testing. Executes required in-process product quality checks and documents accurately. Understands and runs processes to meet the assigned schedule and standards/routers; when this is not achieved, participates in the debrief to understand the reasons why and what needs to be corrected moving forward. Documentation: Completes documentation associated with manufacturing processes (e.g. batch record, protocols, and logbooks) with detail and accuracy. Meets requirements for entries on all applicable Batch Production pages, completion and attachment of all dispensary and weight verification tickets. Verifies the manufacturing process on BPR in an accurate and timely manner. Provides status updates and operational challenges on status boards. Continuous Improvement: Assists in troubleshooting process issues; refers deviations from standard procedure to the supervisor. Typically participates in at least one continuous improvement project of a moderate scope and complexity. Safety & Compliance: Adheres to all cGMP compliance/regulatory mandates and quality requirements. Participates in safety teams, start-up discussions, incident debriefing sessions, etc. Ensures compliance with SOPs, policies and procedures as required by the Company and regulatory agencies. Maintain a clean, organized, work area. Training: Conforms to all training requirements, including company required and machine-specific training. Teamwork & Collaboration: Contributes to team and project success by sharing previously acquired knowledge. Collaborates typically within own cross-functional work unit and occasionally with contacts outside own unit or department. Requirements - Trainee - Level I Operator: HS diploma, GED or College Associate Degree Minimum of 1-3 years experience in a labor intensive environment Forklift certification preferred. Ability to communicate and comprehend English language both verbally and written - Level II Operator (OSD/Solid Dose Manufacturing expereince required): HS diploma, GED or College Associate Degree Minimum of 3-7 years of OSD pharmaceutical manufacturing (cGMP) experience Forklift certification preferred. - Level III Operator (OSD/Solid Dose Manufacturing expereince required): HS Diploma, GED or College Associate Degree Minimum 7+ years of pharmaceutical manufacturing (cGMP) experience and certification in assigned area, as required or proficiency demonstrated in competencies as required. Forklift certification preferred. Required Knowledge & Skills for Level II & III Strong background in solid dose manufacturing (OSD) Experience in 1 or more of the following areas: Compression, Granulation, Encapsulation, Wurster Coating, Coating, Fluid Bed Dryers, Bead Tower Capable of cleaning, setting-up, dismantling and operating state of the art tablet presses and encapsulation, i.e., Fette 3200i; Fette P 3030; MG2 planeta; Korsch XM 12. Knowledgeable of FDA regulations, GMP, Lean Manufacturing, Six-Sigma, etc. Solid working knowledge and skills in procedures, techniques, tools, materials and/or equipment needed for the position. Basic math, reading, legible writing skills, and problem-solving abilities. Proficient in sampling batches Ability to participate in Continuous Improvement projects. Required for all levels: Written Communication - Writes clearly and informatively; Edits work for spelling and grammar; Varies writing style to meet needs; Presents numerical data effectively; Able to read and interpret written information. Oral Communication - Speaks clearly and persuasively in positive or negative situations; listens and gets clarification; Responds well to questions; Demonstrates group presentation skills; Participates in meetings. Physical Requirements: Must be able to stand for long periods of time (up to 12 hour shifts), maneuver at least 50 pounds, climb ladders, wear a respirator and pass associated respirator tests and/or requirements, and be able to wear all required PPE, including safety glasses, ear plugs, and safety shoes. Salary Description $18- $33 per hour (Flexible based on experience)

Sunoco LP is a leading energy infrastructure and fuel distribution master limited partnership operating across 47 U.S. states, Puerto Rico, Europe, and Mexico. The Partnership's midstream operations include an extensive network of approximately 9,500 miles of pipeline and over 100 terminals. This critical infrastructure complements the Partnership's fuel distribution operations, which serve approximately 10,000 convenience stores, independent dealers, commercial customers, and distributors. At Sunoco, we take great pride in what we do and wholeheartedly believe our employees drive success for our company and our customers. We are always looking for the best and brightest talent and we are committed to making your job a challenging and rewarding experience. Primary Responsibilities: Under general supervision of Terminal Supervisor, the terminal operator is responsible for operating all Terminal equipment in connection with receiving, storing, transferring, and loading of petroleum products. * Gauge storage tanks and take meter readings for all products on a daily basis * Calculate and input all product inventories and meter readings into appropriate systems * Perform daily and monthly reconciliation of product inventories and thru-puts * Perform facility maintenance on office building, assets, vegetation, as needed * Perform the safe loading of petroleum products onto barges * Travel to various crude facilities with little notice to effectively assist crude terminals across the organization * Take product samples as required and performs/log required Quality Control tests * Perform and log all scheduled maintenance and compliance inspections * Ensures that all Terminal equipment are functioning properly and report failures to supervisor * Performs daily walk around inspections to identify potential risks and ensure good housekeeping standards are maintained * Issues work permits to contractors performing work at Terminal. This includes ensuring that pre-job safety meetings, lockout - tag-out, confined space entry, and gas tech monitoring requirements are met for all work performed at the Terminal; during the project, correcting or stopping all unsafe acts or conditions not in accordance with Company Policies and Procedures by any party entering the facility * Remain knowledgeable of, able and prepared to enact and coordinate the Emergency Response activities until relieved by supervisor or management personnel * Communicates product outages and equipment downtime to supervisor, customers, and other impacted parties in a prompt fashion Minimum Requirements: * A High School Graduate, or equivalent * Ability to travel up to 50% * Effectively communicate with peers and management of various levels * Self-starter able work with little or no supervision * Carry a pager or cell phone allowing for shift hold over or shift reassignment, as well as call out at all hours * Able to use basic hand tools and operate basic product testing equipment * Proficient in mathematics and able to perform all required calculations * Proficient with Microsoft Suite * Must be able to communicate clearly and effectively, both orally and written * Must have and maintain a valid driver's license for state of residence * Able to notice subtle Color differences in product samples * Must be able to work outdoors in extreme weather, perform heavy physical labor in a safe manner, and climb heights in excess of 60 ft. * In order to perform the essential duties, regular work attendance is required * Must be willing and able to work as a part of team, take direction from supervisor(s), prioritize work schedules, focus attention to details, and follow work rules

Job Description Responsible for the receipt of all incoming materials, supplies, equipment and returned goods. Routes or delivers material to storage or production areas. Safely operates a variety of material handling equipment, which may include narrow aisle, wire guided powered industrial trucks. Confirms customer orders before they are packed to ensure the correct chemicals are shipped and packs them to ensure conformity to all applicable shipping regulations. Essential Job Functions Receives and puts away all incoming materials, supplies, equipment and returned goods (Receiving) Unloads trailer using power equipment, verify freight, and sign bill of lading (Receiving) Sorts, inspects, and receives in the appropriate system IE SAP (Receiving) Applies labels and cans inbound materials (Receiving) Schedules dock appointments with carriers (Receiving) Communicates with Procurement any discrepancies or product issues (Receiving) Packs hazardous and nonhazardous items for shipment to customer (Packing) Packs pre-pack and bulk materials, following established procedures and instructions while complying with hazard regulations (Packing) Packs and meters specialty orders (Packing) Communicates with Customer Interface Departments on shipping issues, expedites priorities (Packing) Works with external vendors to schedule dock appointments (Bulk Receiving) Communicates and resolves discrepancies with internal customers (Packing/Receiving) Verifies chemicals, catalog number, lot number, special requests information, unit size and weights against order documentation found in packing or receiving instructions Applies all required labels and markings to box to comply with hazardous materials regulations (Packing/Receiving) Prepares hazardous shipping documentation (Packing/Receiving) Maintains record of orders (Packing/Receiving) Removes and ships all defective material to vendors (Packing/Receiving) Put product away using scanner or computer system (Material Handler) Selects and puts away material using narrow aisle, wire guided machines. This includes use of operator up machines and other powered industrial trucks (Material Handler) Operates both powered and manual material handling equipment in a safe manner (Material Handler) Fulfills internal supply orders Accurately selects and stages product with use of power equipment Delivers product to on site customers and puts product into storage areas Maintains inventory accuracy Performs all necessary adjustments and moves in the appropriate system Assists with training new employees Audit counts, verify actual location with system Works with team leads and supervisors to troubleshoot systems issues. Operates SAP and WMS systems, and retrieve pull slips for pull ticket runs. Reports unsafe or potentially unsafe hazards to team leads or any member of management. Miscellaneous duties and tasks as assigned Exemplary attendance and adherence to schedule

Job DescriptionSalary: $24/hr - $36/hr Primus Aerospace is a leading manufacturing partner to aerospace, defense, and space OEMs, Primes, and Tier I suppliers. The company specializes in producing high-tolerance, complex geometry parts machined using standard and exotic metals. Primus works directly with all major aerospace manufacturers (e.g., Boeing, Lockheed Martin, Northrop Grumman) to provide components for mission-critical civilian and defense programs. Weekend, nights (F,S,S 6pm - 6:30am), paid 40 hrs for 36 hrs worked Key Responsibilities Knowledge of calipers, micrometers, metrology. Ability to indicate vices. Coordinate x, y, z Knowledge of machining principles. Operate CNC machines from provided work instructions from work order or set up personnel Verifying dimensional characteristics of parts Meet expected cycle times and production schedule Completion of all required paperwork in a timely manner Requirements CNC Operations - Mill turn and Lathe - with on the job training. Reading blueprints and using hand tools Prioritizing tasks and maintaining production goals Self-starter with a good attitude Attention to detail and a strong desire to produce quality products Active Secret Clearance We offer comprehensive benefits for full-time employees including: PTO 10 paid holidays Medical, Dental, Vision, Short- and Long-term disability insurance 401K match Long and short-term incentive plans Benefits start 1st of the month after date of hire To adhere to U.S. Government international trade regulations, applicant must be a U.S. Citizen. At Primus Aerospace, we are proud to be an Equal Opportunity Employer. We are committed to creating an inclusive environment that supports, respects, and celebrates all individuals. #zr #cj

Responsibilities Hiring for the 2026 Construction Season This position operates one or more types of construction equipment such as asphalt pavers, asphalt rollers, material transfer vehicles, milling machines, back hoes and skid steers as they apply to milling and paving operations. Operators are responsible for safe operation, non-mechanical maintenance and up-keep of equipment. Discusses plans and goals for the day's work with field manager and determines best method of getting assigned work done safely, productively and on time. Performs physical duties that are commonly associated with the safe and productive operation of said piece of equipment. Performs equipment maintenance duties such as cleaning, greasing and maintaining fluid levels on equipment. Operates equipment with priority of making the job safe for all persons working around the equipment. Communicates clearly with other crew members in a manner commensurate with teamwork in order to accomplish daily goals. Qualifications GED / HS Diploma a plus. 2 yrs of equipment operating experience is a necessity. Related work experience is a necessity. Valid Driver's License required. SKILLS, KNOWLEDGE AND ABILITIES: Make judgments regarding the most efficient operations of equipment and attachments. Must have very good hand, foot and eye coordination to safely operate their equipment Compliance with Allan Myers Polices including but not limited to: Equipment repair / maintenance procedures and Operator Safety Standards Safety, Safety, Safety! “Home Safe Tonight” and related policies “AIPS” PHYSICAL DEMANDS: Requires extensive and heavy physical activity and dexterity. Must be able to operate for long periods of time and to get into awkward positions when cleaning and providing maintenance to the equipment. Requires the ability to stand, walk, reach, kneel, climb or balance. Must be able to carry or handle materials sometimes up to 75 pounds. Requires specific types of vision: close, color, peripheral. WORK ENVIRONMENT: Responsible for safety of self and fellow workers. Work conditions vary from site to site and are affected by the weather. Rough grading and undeveloped job sites present a threat to safety where carelessness or poor judgment could result in serious of fatal injury to self or others. Works adjacent to live traffic on most days. TRAVEL REQUIREMENTS: A must, overnight stays may be required on occasion. Night and Weekend work shifts are common throughout the normal milling and paving season. Overview Our Company Does Work That Matters Allan Myers is the largest heavy civil construction and materials production contractor in the mid-Atlantic. We build infrastructure: the highways and bridges that connect cities and towns, the public water and wastewater systems that provide clean water to your home and keep our streams clean. We take pride in meeting the highest quality standards because it ensures our work will have a long-lasting positive impact on the community. When you get home safe each night, you know that what you did that day matters. At Allan Myers, you are part of a team dedicated to making things better, including your career. We pay well and provide generous benefits. We offer extensive training and promote from within. If you have the drive, we will help you build a career in the thriving construction industry and reach your full potential. Allan Myers is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national or ethnic origin, age, disability, protected veteran status or other characteristics protected by law. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Notice to External, Third Party, Agency Recruiting Firms: Allan Myers maintains a preferred vendor list and does not accept unsolicited resumes from agencies not under contract. Any resume submitted without a signed agreement and prior written authorization from our Talent Acquisition team will be deemed the property of Allan Myers. We reserve the right to engage with such candidates (contact, interview and hire) without financial obligation. No other employee is authorized to approve resume submissions or bind Allan Myers to any fee arrangement.

The Personalization Machine Operator IV sets up and operates Datacard, Zebra, and other personalization equipment to process customer orders accurately and efficiently. This role ensures all identification cards meet quality standards, with any defective cards identified, documented, and remade. The position requires attention to detail, technical aptitude, and the ability to work efficiently in a fast-paced environment while supporting mailing and fulfillment processes. The successful candidates will be required to attend company paid travel and training in Bolingbrook, IL prior to starting at our new, soon to open, Dulles, VA production facility. Job Responsibilities: * Operate personalization and fulfillment equipment efficiently and safely. * Select and prepare production data according to the daily schedule * Process production jobs with accuracy, speed, and attention to detail. * Perform quality checks to ensure all products meet company and customer standards. * Verify counts of finished products to confirm order completion. * Keep machines and work areas clean, organized, and well maintained. * Follow all company safety procedures and regulatory requirements. * Produce high-quality products within established timeframes while minimizing waste. * Record and route defective or remake materials for reprocessing. * Maintain accountability for all materials released and returned to secure storage. * Accurately document and prepare completed orders for shipment each day. * Track job progress and update production data through the ERP system. * Follow ISO work instructions and company quality procedures. * Review and sign off on completed card production. * Print, fold, and insert mail pieces according to job specifications and documentation. * Meter, seal, and prepare envelopes for mailing as instructed. Accountabilities: * Complete all job orders accurately and on time. * Meet production schedules and service level goals consistently. * Verify that all card and carrier specifications meet required standards. * Maintain compliance with departmental KPIs, quality metrics, and company policies. Job Specifications: * Work performed in a fast paced production setting. * Required to lift up to 45 lbs. * Ability to sit or stand for long periods of time, and reach and move about facility. * Overtime may be required. * Wearing of company furnished smock is mandatory. Required Qualifications: * Strong mathematical aptitude. * Excellent organizational, verbal, and written communication skills. * Proven ability to multitask effectively in a fast-paced, high-demand environment. * Strong problem-solving and analytical thinking skills. * Effective interpersonal skills with the ability to collaborate across teams. * Capable of working independently with minimal supervision or as part of a team. * High attention to detail and strong hand-eye coordination. * Requires periodically working extended hours, including Saturdays, to cover peak production periods. * Requires paid travel and training for a limited amount of time in our main faciliclity located in Bolingbrook, IL. Preferred Qualifications: * High school diploma or equivalent. * Six months or more of experience in card personalization or a related manufacturing environment. * Proficiency with Microsoft Word and Excel.

Job Description: Mailroom/Machine Operator (Temp-to-Perm) We are seeking a reliable and detail-oriented Mailroom/Machine Operator for a temporary-to-permanent opportunity in our Glen Burnie, MD site. This role focuses on providing essential administrative support to business operations through the processing, sorting, and scanning of incoming mail and materials. The successful candidate will operate high-speed mail processing equipment and ensure complete accuracy and compliance in all tasks. Job Details Location Glen Burnie, MD (1000 Stewart Avenue) Schedule Full-Time: 40 hours per week Work Days Monday, Tuesday, Thursday, Friday, Saturday Days Off Wednesday and Sunday Shift Hours 6:00 AM - 2:30 PM Compensation $18.00 per hour Contract Length Temporary (11/17/2025 - 02/16/2026) with opportunity for Permanent Conversion Note: We are primarily seeking candidates residing in Anne Arundel County, MD, including Severn, Glen Burnie, Crofton, Linthicum, Ferndale, and Gambrills, due to current commute challenges from other areas. Key Responsibilities The Transaction Processing Specialist II will be responsible for a variety of mailroom and data capture duties, including: Mail Processing & Sorting: Operating high-speed Opex P40 mail sorter and Opex envelopener equipment. Performing physical sorting of mail into corresponding lockbox mail bins. Handsorting mis-sorted mail and other documents as assigned. Scanning & Data Capture: Conducting inbound scanning and delivery of receipted mail. Operating high/low speed capture equipment for transaction processing. Handling exceptions and similar activities related to document imaging. General Duties: Performing basic data entry and utilizing computer applications. Completing required accuracy and compliance testing. Performing clerical tasks as needed and other duties as assigned by management. Qualifications Must have basic data entry skills and working computer knowledge. Ability to operate mail sorting and opening equipment (training provided on specific models). Must be able to perform physical duties, including standing, walking, and lifting up to 10 lbs. High level of accuracy and attention to detail is critical. Ability to work the required schedule: Monday, Tuesday, Thursday, Friday, and Saturday from 6:00 AM to 2:30 PM. Next Steps If you are interested in this temporary-to-permanent role and meet the qualifications, please submit your application.

MACHINE OPERATOR \/ PACKER INSPECTOR, NIGHTS RETENTION BONUS of $800, plus eligible for BI\-ANNUAL PROFIT SHARING BONUS! Location: Sterling, MA Schedule: 8 pm - 8 am, 3\-4 days per week, and every other weekend. In a nutshell you will … · Package bags\/rolls into boxes, weigh boxes and keep accurate counts in our system. · Perform quality control checks on product and ensure all are properly labeled before stacking finished product. · Keep the work area clean and clutter free: pick up scrap material around the production lines and cut scrap off cores. · Alerting Setup Technicians and Changeover Technicians using the light system to keep them informed of production status. To be successful you must be able to … · Measure small increments on a ruler. · Read order specifications in English and use basic math skills. · Regularly see, hear, stand and communicate. · Occasionally required to stretch, bend, climb, or balance. · Frequently required to lift and\/or move 30 - 40 lbs., and up to 60 lbs. · Must occasionally climb towers up to 35 ft high. Cannot be afraid of heights. · Be punctual and arrive at the production line on time. Education requirement: High School Diploma or equivalent We provide you with … · 10% Shift differential for night shift. · Profit sharing bonus potential twice per year. · Opportunity for advancement. · A safe, supportive, team oriented work environment. · Great health, dental, and vision insurance plans, dependent and health care flexible spending accounts, disability insurance, 401(k) with company match, tuition reimbursement and more. About Us: At Laddawn, we are constantly working to elevate our game. We are an innovative plastics manufacturer revolutionizing the way businesses buy packaging, and our sales are proving it, keeping our warehouses busy 24\/7. As we grow, we need help to exceed our customers' expectations. We are fun, unique, and a little quirky\-\- business as usual just isn't our style. Teams and individuals alike take ownership of business challenges and are empowered to make decisions that shape our success. Have we caught your attention yet? If so, apply now! The information listed above is not intended to be an all\-inclusive list of the duties & responsibilities of the job described. All qualified applicants will receive consideration for employment without regard to without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. "}}],"is Mobile":false,"iframe":"true","job Type":"Full time","apply Name":"Apply Now","zsoid":"61177098","FontFamily":"Verdana, Geneva, sans\-serif","job OtherDetails":[{"field Label":"Department Name","uitype":4,"value":"Production"},{"field Label":"Work Experience","uitype":2,"value":"0\-1 year"},{"field Label":"Industry","uitype":2,"value":"Manufacturing"},{"field Label":"City","uitype":1,"value":"Sterling"},{"field Label":"State\/Province","uitype":1,"value":"United States"},{"field Label":"Zip\/Postal Code","uitype":1,"value":"01564"}],"header Name":"Machine Operator (Packer\/Inspector) Nights \- BONUS!","widget Id":"3***********078419","is JobBoard":"false","user Id":"3***********096003","attach Arr":[],"custom Template":"2","is CandidateLoginEnabled":false,"job Id":"3***********470035","FontSize":"14","google IndexUrl":"https:\/\/laddawn.zohorecruit.com\/recruit\/ViewJob.na?digest=a1TKuG01TUWD.LIsyzjp2vkszvENF3KICLg6R2Fp@Kk\-&embedsource=Google","location":"Sterling","embedsource":"CareerSite","indeed CallBackUrl":"https:\/\/recruit.zoho.com\/recruit\/JBApplyAuth.do"}

TTM Technologies, Inc. - Publicly Traded US Company, NASDAQ (TTMI) - Top-5 Global Printed Circuit Board Manufacturer About TTM TTM Technologies, Inc. is a leading global manufacturer of technology products, including mission systems, radio frequency ("RF") components, RF microwave/microelectronic assemblies, and technologically advanced printed circuit boards ("PCB"s). TTM stands for time-to-market, representing how TTM's time-critical, one-stop design, engineering and manufacturing services enable customers to reduce the time required to develop new products and bring them to market. Additional information can be found at *********** We're always looking for talented individuals to join our team. Whether you're an experienced manufacturing professional or just starting your career - TTM offers a supportive workplace where all skillsets can thrive. Why Join Us? At TTM, we believe in offering our employees an environment where they can make a real impact on the work we do. Here's a look at what we provide our employees to set them up for success. * Career Development: We invest in your growth - our Operator Advancement Program supports your goals. We provide operators and assemblers at all levels the opportunity to certify their skills and build their career with us up to 3 times a year by applying to the OAP program. TTM promoted 68% of applicants in the program's first year! * Competitive Compensation: We offer a competitive package that reflects your skills and experience along with annual compensation reviews to ensure your growth is aligned with your performance and market trends. * Comprehensive Benefits and PTO: Including health, dental, and vision insurance to keep you at your best. Enjoy 10 paid holidays and 3 weeks of paid time off annually to recharge. TTM strives to invest in our team members at all levels - starting on your first day. To ensure the growth and development of our new hires, this position is eligible for a 90 Day Evaluation that includes a pay increase if key performance indicators are met. Position consists of manufacturing components in accordance with specifications and written procedures. This position may include machine operation, manual production using hand tools, visual inspection, physical measurements, and packaging finished product. This position requires the ability to work with small delicate components using a high degree of dexterity and accuracy. Essential Duties and Skills: * Ability to load and unload material from automated equipment with little set-up. * Maintain clean, safe and orderly work environment. * Ability to interpret and follow verbal and written work orders. * Operate various machines throughout the day. * Clean and de-burr various product groups as needed. * Use various measuring tools as required. * Offer suggestions to improve/enhance processes. * Report any problems, defective materials, questionable conditions or unsafe conditions to supervisor or leader * Provide high quality and timely service to all internal customers. * Listen to customer requirements and take prompt, appropriate action that exceeds expectation. Note: The statements herein are intended to describe the general nature and level of work being performed by employees, and are not to be construed as an exhaustive list of responsibilities, duties, and skills required of personnel. Furthermore, they do not establish a contract for employment and are subject to change at the discretion of the employer. Required Skills: * Ability to operate simple computer programs to run the equipment * Ability to read, perform simple calculations and basic computer skills * Ability to follow written and oral instructions. * Demonstrate the ability to work in a dynamic, fast-paced work environment. * Ability to work both independently and as part of a team. * Must have strong written and verbal communication skills to detail problems, issues to co-workers and managers. Required Education: High School Degree Required Work Experience: 0-2 Years Relevant Experience #LI-JS1 Compensation and Benefits: TTM offers a variety of health and well-being benefit programs. Benefit options include medical, dental, vision, 401K, Flexible Spending Account, Health Savings Account, accident benefits, life insurance, disability benefits, paid vacation & holidays. Benefits are available 1st of the month following date of hire. Compensation for roles at TTM Technologies varies depending on a wide array of factors including but not limited to the specific office location, role, skill set and level of experience. As required by local law, TTM provides a reasonable range of compensation for roles that my be hired in New York, California and Colorado. For California-based roles, compensation ranges are based upon specific physical locations. Export Statement: Must comply with TTM Export Control Policies and Procedures and all applicable laws including ITAR, EAR and OFAC including but not limited to: a) being able to identify ITAR product on the manufacturing floor and understand that access to these products and related technical data is restricted to only US Citizens and US Permanent Residents; b) recognition of Foreign Person visitors by badge differentiation; c) understand and follow authorization procedures for bringing foreign visitors into facilities (VAL); d) understand the Export and ITAR requirements for shipments leaving the US; e) manage vendor approvals for ITAR manufacturing and services. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, citizenship, disability or protected veteran status.

The TSUBAKI name is synonymous with excellence in quality, dependability, and customer service. U.S. Tsubaki is a leading manufacturer and supplier of power transmission and motion control products. As a part of a vast, international network of corporate and industrial resources, Tsubaki offers its customers the finest state-of-the-art products available in the world and we strive to be the “Best Value” supplier in the industry. Essential Duties and Responsibilities: Operate a wide range of machinery to fabricate, process, and assemble chain and other operations associated to ensure that all processes are maintained and run to the high levels of efficiency and quality stipulated by US Tsubaki standards. Primarily responsible for the operation of a complete range of: grinders, drilling machines, ballizers, semi-automatic equipment, power presses, and packaging equipment, or other operations associated with the fabrication, processing, or assembly of pins, bushings, rolls, side plates, attachments, and all other chain related components. No set-up skills are required. Able to measure all quality parameters of assembled and unassembled chain components and determine corrective action where appropriate to the processes concerned. Retrieve and replace components from parts storage or prior processes to ensure continuous operation of equipment. Requirements: Must have the ability to learn to operate simple production equipment with minimal amount of instruction. Basic numeric and writing skills are essential. High level of dexterity and flexible nature essential. Requires sufficient knowledge of all types of production equipment for example: grinders, drilling machines, ballizers, automatic equipment, semi-automatic equipment, power presses, greasing, and packaging equipment, and tooling required, to maintain close tolerances and work specifications. Self-motivated to take ownership of work schedule and quality. Continuous improvement: Willing to accept change to support being a Fast - Flexible - Efficient section. Must be a team player - capable of working with peers and supervisors both inside and outside the section in order to satisfy the needs of internal and external customers. Make decisions in order to perform a variety of tasks having timely constraints. Follow directions / instructions of group leader or supervisor. Able to work in any fabrication, processing, assembly, and warehouse section when and where needed. Capable of handling heavy weights. Tsubaki is an Equal Opportunity Employer - Minorities/Females/Veterans/Disability PM21 Compensation details: 20.54-23.65 Hourly Wage PIacbe56fd933d-30***********2

The **Machine Learning Engineer II** will be a member of the Learning and Active Perception (LEAP) group in AV's MacCready Works division and support the development of a variety of innovative computer vision capabilities (object detection, classification, localization, and tracking) and other image/video analytics for defense and commercial applications. These development efforts require a range of skills and tools across traditional engineering, computer science, and mathematical disciplines including but not limited to data management, computer vision, machine learning, optimization, and deep convolutional neural networks. This position will span multiple stages of the development process including requirements gathering, algorithm design, prototyping, test and evaluation, and validation and verification testing. This specific role also involves on-site support for experimentation and fielded systems requiring a significant amount of extended travel, both domestic and international. **Duties** - Support development of computer vision and machine learning (ML) algorithms capable of object detection, classifying, localizing, and tracking objects of interest from a variety of stationary and mobile sensor platforms with the primary purpose of real-time automated target recognition (ATR) - Perform visual imagery data science to inform data collection, data labeling, and data selection for training deep computer vision ML algorithms, train the algorithms using the data, and validate data selection and algorithm design through a series of purpose-designed experiments. This includes: o Analyze ML algorithms to solve a given problem and rank them by their success probability on new data o Set objectives and develop models that help achieve them, along with metrics to track their progress o Select appropriate datasets and data representations o Analyze errors of the data, model, and design strategies to overcome them - Write and test software to support the integration of machine learning algorithms into aircraft (such as autopilots, payloads, or other functional components) or other systems - Other duties as assigned **Experience** - 2 - 5 years of relevant computer vision experience - Familiarity with Python and C/C++ required - Proficiency with a deep learning framework, preferably PyTorch - Proficiency with basic libraries for machine learning such as, Open-CV, scikit-learn, and pandas - Familiarity with Linux - Familiarity with Nvidia Tools (CUDA, JetPack, TensorRT) and deployment process to Nvidia GPUs - Demonstrated ability to troubleshoot complex systems and perform algorithmic optimization - Ability to perform exploratory data analysis, including visualizing and manipulating large datasets **Education** BS in any of the following fields: Computer Science/Engineering, Mathematics, Physics, or related Science or Engineering discipline with 2+ years of relevant experience in machine learning and/or computer vision. **Additional Requirements** - Must be a team player and collaborate effectively - Excellent verbal and written skills - Has effective problem-solving, analytical and interpersonal skills - Ability to work within defined requirements to complete tasks under moderate supervision - Able to excel in a fast-paced, deadline-driven environment, where small teams share a broad variety of duties - Displays strong initiative and drive to accomplish goals and meet company objectives - Takes ownership and responsibility for current and past work products, and demonstrates a willingness to share the results with other team members and provide feedback and input to teammates working similar problems. - Is committed to learning from mistakes and driven to improve and enhance performance of oneself, others, and the company - Familiarity with office software and computer-based productivity tools **Physical Demands** - Ability to work in office and field environments (Constant) - Required to sit and stand for long periods; talk, hear, and use hands and fingers to operate a computer keyboard (Frequent) **Special Requirements** - U.S. Citizenship required - Active Secret level (or higher) DoD security clearance - Willingness and ability to travel CONUS and OCONUS (Frequent / 50%+) including extended stays up to 60 days **Clearance Level** No Clearance The salary range for this role is: $102,708 - $145,530 AeroVironment considers several factors when extending an offer, including but not limited to, the location, the role and associated responsibilities, a candidate's work experience, education/training, and key skills. **ITAR Requirement:** _T_ _his position requires access to information that is subject to compliance with the International Traffic Arms Regulations ("ITAR") and/or the Export Administration Regulations ("EAR"). In order to comply with the requirements of the ITAR and/or the EAR, applicants must qualify as a U.S. person under the ITAR and the EAR, or a person to be approved for an export license by the governing agency whose technology comes under its jurisdiction. Please understand that any job offer that requires approval of an export license will be conditional on AeroVironment's determination that it will be able to obtain an export license in a time frame consistent with AeroVironment's business requirements. A "U.S. person" according to the ITAR definition is a U.S. citizen, U.S. lawful permanent resident (green card holder), or protected individual such as a refugee or asylee. See 22 CFR § 120.15. Some positions will require current U.S. Citizenship due to contract requirements._ **Benefits** : AV offers an excellent benefits package including medical, dental vision, 401K with company matching, a 9/80 work schedule and a paid holiday shutdown. For more information about our company benefit offerings please visit: ********************************* . We also encourage you to review our company website at ******************** to learn more about us. Principals only need apply. NO agencies please. **Who We Are** Based in California, AeroVironment (AVAV) is a global leader in unmanned aircraft systems (UAS) and tactical missile systems. Founded in 1971 by celebrated physicist and engineer, Dr. Paul MacCready, we've been at the leading edge of technical innovation for more than 45 years. Be a part of the team that developed the world's most widely used military drones and created the first submarine-launched reconnaissance drone, and has seven innovative vehicles that are part of the Smithsonian Institution's permanent collection in Washington, DC. Join us today in developing the next generation of small UAS and tactical missile systems that will deliver more actionable intelligence to our customers so they can proceed with certainty - and succeed. **What We Do** Building on a history of technological innovation, AeroVironment designs, develops, produces, and supports an advanced portfolio of unmanned aircraft systems (UAS) and tactical missile systems. Agencies of the U.S. Department of Defense and allied military services use the company's hand-launched UAS to provide situational awareness to tactical operating units through real-time, airborne reconnaissance, surveillance, and target acquisition. _We are proud to be an EEO/AA Equal Opportunity Employer, including disability/veterans. AeroVironment, Inc. is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Qualified applicants will receive fair and impartial consideration without regard to race, sex, color, religion, national origin, age, disability, protected veteran status, genetic data, sexual orientation, gender identity or other legally protected status._ **ITAR** U.S. Citizenship is required. Secret or Top Secret clearance, or the ability obtain a clearance is desired. **About AV:** **AV isn't for everyone. We hire the curious, the relentless, the mission-obsessed. The best of the best.** We don't just build defense technology-we redefine what's possible. As the premier autonomous systems company in the U.S., AV delivers breakthrough capabilities across air, land, sea, space, and cyber. From AI-powered drones and loitering munitions to integrated autonomy and space resilience, our technologies shape the future of warfare and protect those who serve. Founded by legendary innovator Dr. Paul MacCready, AV has spent over 50 years pushing the boundaries of what unmanned systems can do. Our heritage includes seven platforms in the Smithsonian-but we're not building history, we're building what's next. **If you're ready to build technology that matters-with speed, scale, and purpose-there's no better place to do it than AV.** **Careers at AeroVironment (*****************************************

PACKER - INSPECTOR Experience not necessary; training provided! Location: Sterling, MA In a Nutshell: Laddawn has manufacturing facilities located from coast to coast, which allows us to rapidly ship to our customers no matter where they are located. You'll help us inspect and package finished product that wows our customers. What you'll be doing: · Packaging bags\/rolls into boxes, weighing the boxes, and keeping accurate counts in the computer system. · Performing quality control checks on product and ensuring that all products are properly labeled with a Q.C. sticker before stacking finished product. · Keeping the work area clean and clutter free: picking up scrap materials around the production lines and cutting scrap off cores. · Alerting Setup Technicians or Changeover Technicians using the light system to keep them informed of production status. Scheduling Production workers are scheduled 12 hours per day, 4 days per week, and work every other weekend. Day shift is scheduled from 8am\-8pm. Night shift is scheduled from 8pm\-8am. Apply if you are able to: · Work independently and use common sense and critical thinking skills to handle and resolve problems. · Measure small increments on a ruler. · Read order specifications in English and use basic math skills. · Be punctual and arrive at the production line on time. · And you cannot be afraid of heights Education High School Diploma or equivalent Physical Demands · Regularly required to stand and communicate · Ability to see and hear · Occasionally required to stretch, bend, climb or balance · Often required to lift and\/or move up to 65 lbs. · Frequently required to lift 30 to 40 pounds · Occasionally climb towers up to 35 feet high About Us: We're a family\-owned company that's been around for over 40 years, but we have the attitude of a start\-up and we're growing like crazy! As a web based wholesaler, we are revolutionizing the way businesses buy flexible packaging products, and our sales are proving it. At Laddawn, we are constantly working to elevate our game. We are fun, unique, and a little quirky\-\- business as usual just isn't our style. Teams and individuals alike take ownership of business challenges and are empowered to make decisions that shape our success. Have we caught your attention yet? If so, apply now if you think you can keep up. The information listed above is not intended to be an all\-inclusive list of the duties and responsibilities of the job described. All qualified applicants will receive consideration for employment without regard to race, sex, color, religion, national origin, protected veteran status, or on the basis of disability. "}}],"is Mobile":false,"iframe":"true","job Type":"Full time","apply Name":"Apply Now","zsoid":"61177098","FontFamily":"Verdana, Geneva, sans\-serif","job OtherDetails":[{"field Label":"Department Name","uitype":4,"value":"Production"},{"field Label":"Work Experience","uitype":2,"value":"0\-1 year"},{"field Label":"Industry","uitype":2,"value":"Manufacturing"},{"field Label":"City","uitype":1,"value":"Sterling"},{"field Label":"State\/Province","uitype":1,"value":"Massachusetts"},{"field Label":"Zip\/Postal Code","uitype":1,"value":"01564"}],"header Name":"Machine Operator\/Packer","widget Id":"3***********078359","is JobBoard":"false","user Id":"3***********096003","attach Arr":[],"custom Template":"2","is CandidateLoginEnabled":false,"job Id":"3***********159007","FontSize":"14","location":"Sterling","embedsource":"CareerSite","indeed CallBackUrl":"https:\/\/recruit.zoho.com\/recruit\/JBApplyAuth.do"}

TTM Technologies, Inc. - Publicly Traded US Company, NASDAQ (TTMI) - Top-5 Global Printed Circuit Board Manufacturer About TTM TTM Technologies, Inc. is a leading global manufacturer of technology products, including mission systems, radio frequency ("RF") components, RF microwave/microelectronic assemblies, and technologically advanced printed circuit boards ("PCB"s). TTM stands for time-to-market, representing how TTM's time-critical, one-stop design, engineering and manufacturing services enable customers to reduce the time required to develop new products and bring them to market. Additional information can be found at *********** We're always looking for talented individuals to join our team. Whether you're an experienced manufacturing professional or just starting your career - TTM offers a supportive workplace where all skillsets can thrive. Why Join Us? At TTM, we believe in offering our employees an environment where they can make a real impact on the work we do. Here's a look at what we provide our employees to set them up for success. * Career Development: We invest in your growth - our Operator Advancement Program supports your goals. We provide operators and assemblers at all levels the opportunity to certify their skills and build their career with us up to 3 times a year by applying to the OAP program. TTM promoted 68% of applicants in the program's first year! * Competitive Compensation: We offer a competitive package that reflects your skills and experience along with annual compensation reviews to ensure your growth is aligned with your performance and market trends. * Comprehensive Benefits and PTO: Including health, dental, and vision insurance to keep you at your best. Enjoy 10 paid holidays and 3 weeks of paid time off annually to recharge. TTM strives to invest in our team members at all levels - starting on your first day. To ensure the growth and development of our new hires, this position is eligible for a 90 Day Evaluation that includes a pay increase if key performance indicators are met. Position Scope: Working within a high-production industrial environment, the Production Operator is responsible for meeting departmental production, quality, and safety standards. Upon training within the department, the Production Operator will be responsible for independently reading and verifying the shop order and then setting up and completing the manufacturing process, which may include: printing equipment, automated equipment, small hand tools, viewing product through a microscope, and fine assembly work. Duties and Responsibilities: * Read and accurately understand the shop traveler (job order, instructions, and customer specifications) * Set up and operate different types of machinery according to the department processes and each job's requirements * Consistently evaluate product for quality, verifying departmental procedures are completed accurately * Record defects, document quality data, and work within the quality management system. Immediately escalate issues to the production technician, management, or engineering * Read, record, and report required product data accurately on both the shop order and within computer applications * Acquire production materials, set up the production area, and maintain a clean and safe environment * Follow all safety training and procedures as directed by the Environmental, Health, and Safety (EHS) Manager, including Personal Protective Equipment (PPE), chemical handling, and hazardous waste * Responsible for immediately reporting all accidents, near misses, and safety concerns * Cross train on operations and equipment within the area * Ability to understand and effectively complete at least 1 departmental sub-process Note: The statements herein are intended to describe the general nature and level of work being performed by employees, and are not to be construed as an exhaustive list of responsibilities, duties, and skills required of personnel. Furthermore, they do not establish a contract for employment and are subject to change at the discretion of the employer. Essential Knowledge and Skills: * Ability to read and comprehend English written instructions, including manufacturing work orders, customer specifications, and shop control documents * General computer skills and ability to update electronic records, enter data into systems, and send emails * Able to sit or stand throughout a shift and independently push, pull, or lift 10-50 pounds * Consistently meet attendance requirements. Willingness to work overtime, including weekends as necessary Education: * High school diploma or equivalent preferred Preferred Experience: * Experience: 1-2 years of manufacturing experience preferred, but not required #LI-JS1 Compensation and Benefits: TTM offers a variety of health and well-being benefit programs. Benefit options include medical, dental, vision, 401K, Flexible Spending Account, Health Savings Account, accident benefits, life insurance, disability benefits, paid vacation & holidays. Benefits are available 1st of the month following date of hire. Compensation for roles at TTM Technologies varies depending on a wide array of factors including but not limited to the specific office location, role, skill set and level of experience. As required by local law, TTM provides a reasonable range of compensation for roles that my be hired in New York, California and Colorado. For California-based roles, compensation ranges are based upon specific physical locations. Export Statement: Must comply with TTM Export Control Policies and Procedures and all applicable laws including ITAR, EAR and OFAC including but not limited to: a) being able to identify ITAR product on the manufacturing floor and understand that access to these products and related technical data is restricted to only US Citizens and US Permanent Residents; b) recognition of Foreign Person visitors by badge differentiation; c) understand and follow authorization procedures for bringing foreign visitors into facilities (VAL); d) understand the Export and ITAR requirements for shipments leaving the US; e) manage vendor approvals for ITAR manufacturing and services. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, citizenship, disability or protected veteran status.