Manufacturing engineer jobs in Irondequoit, NY - 297 jobs

Project Engineer-Mechanical_Rochester, NY_Full-Time (FTE)_Direct Hire Project Engineer-Mechanical Job Type: Full-Time (FTE) Base Salary: $100,000 to $150,000+Best-in-class benefits Industry: Construction & Trades Job Category: Engineering Job Description: Responsibilities: *Lead and perform engineering evaluations and analyses, field inspections, design drawings, technical specifications and cost estimations. *Lead and perform standard mechanical engineering analysis of existing and new building mechanical, plumbing and fire protection systems utilizing the latest codes and technologies to provide optimized designs. *Coach/Mentor junior staff as a technical expert. Requirements: *Knowledge of NYS Mechanical, Energy and Plumbing codes, NFPA. *Proficiency in AutoCAD, Revit MEP and Microsoft Office Suite. *Ability to work in a team and communicate effectively both written and verbally. *Energy Modeling experience (Carrier HAP, TRANE TRACE, or EQUEST), LEED Green Associate and Commissioning experience, preferred. *Experience, Education, and Certification *BS in Mechanical Engineering/Engineering Technology *NYS PE required *10+ years of post-college experience. *Specific areas of expertise include chilled and hot water systems, industrial process related mechanical, building HVAC, controls, plumbing systems and fire protection. *Experience designing HVAC and plumbing systems for schools, healthcare facilities and commercial projects is preferred. Work Environment: *Professional in-office environment *May require travel to New York state job sites 10% of the time. Physical Demands: *The job requires prolonged periods of sitting at a computer. *Travel may be required within NY State. Benefits - Full Relocation Assistance Available - Possible for ideal candidate Minimum Education - Bachelor's Degree Willingness to Travel - Occasionally

We are seeking a Senior Design Engineer with advanced expertise in SolidWorks surface modeling and large-format thermoformed part design to support the development of commercial bus and specialty vehicle bodies. This role is critical to delivering exterior and interior components that meet high standards for aesthetics, aerodynamics, durability, and cost-effective manufacturability. The ideal candidate will serve as a technical leader in the design of plastic and composite vehicle body components, with particular strength in managing complex surface data, imported geometry, and tooling considerations unique to heavy-duty thermoforming. This position requires close collaboration with industrial design, manufacturing, and supply chain partners throughout the product lifecycle. Key Responsibilities Product & Surface Modeling Develop complex, production-ready surface and solid models for commercial vehicle body panels using SolidWorks. Translate conceptual and industrial design intent into manufacturable designs, incorporating proper draft, wall thickness, attachment features, and cosmetic requirements. Ensure seamless integration of body components with chassis structures, subframes, and adjacent vehicle systems. Thermoformed Part Design Design large thermoformed components including wheel arches, body cladding, fascia, and interior panels. Collaborate with tooling suppliers and internal fabrication teams to ensure mold accuracy, effective vacuum paths, thermal control, and optimized cycle times. Apply mold-flow principles and account for post-forming tolerances, trimming, and assembly variation in final designs. Surface Repair & Data Optimization Evaluate, repair, and optimize imported CAD data (STEP, IGES) from third-party design sources. Reconstruct or replace incomplete, low-quality, or non-manufacturable surface geometry to meet cosmetic and dimensional requirements. Maintain high levels of surface continuity, curvature control, and Class-A finish quality where required. Cross-Functional Collaboration & Production Support Partner with industrial design, manufacturing, quality, and supply chain teams to deliver integrated vehicle body solutions. Provide hands-on engineering support during prototyping, forming trials, validation builds, and production launches. Create, review, and approve production-ready drawings, BOMs, GD&T, and supporting technical documentation. Required Qualifications Bachelor's degree in Mechanical Engineering, Industrial Design Engineering, or a related discipline. Minimum of 5 years of design experience in commercial vehicle, specialty vehicle, or automotive body manufacturing. Advanced proficiency in SolidWorks, with a strong focus on surface modeling. Demonstrated experience designing thermoformed components for heavy-duty transportation applications. Proven ability to repair and optimize complex imported surface data. Working knowledge of vehicle body assembly methods, fasteners, adhesives, and surface coatings. Familiarity with FMVSS and ADA requirements preferred. Preferred Qualifications Direct experience with bus, truck, or van body systems. Strong understanding of thermoformable materials such as ABS, TPO, and similar plastics. Experience integrating structural reinforcements, including bonded inserts and subframe interfaces. Exposure to ERP-linked BOM management and PLM systems.

**Summer 2026 Intern - Manufacturing Engineering** As a **Summer 2026 Intern - Manufacturing Engineering** at Keurig Dr Pepper (KDP), you will be working in a high speed, fast paced manufacturing environment during a large project installation and start up at the Motts plant. This role will expose you to different phases of capital project management and give you the opportunity to develop and implement improvements to new or existing manufacturing equipment and processes. Each intern will have real responsibilities and will be provide ample opportunity to grow professionally. **Shift/Schedule:** + The KDP 2026 Summer Internship Program will run from June 1 - August 7, 2026 + Full-time; 40 hours per week + Monday-Friday + 8:00am until 5:00pm + In-Person in our **Williamson, NY** facility **As a Manufacturing Engineering Intern you will:** + Gain knowledge in executing operational plans and new manufacturing equipment and processes during a large project installation and start up. + Analyze, design, implement and improve existing processes to increase efficiency and reduce costs + Collaborate with cross-functional teams to identify and solve production issues + Assist with TPM (Total Productive Maintenance) implementation and Lean activities, including participation in Continuous Improvement or Kaizen events and developing, implementing and improving autonomous and preventive maintenance workstreams + Assist in overseeing a large project installation and start up, including documenting open items, tracking progress, interacting with contractors, site management, and front-line employees **Elements of the KDP Internship Program include:** + Engaging and partnering on innovative projects to gain experience in a challenging, cross functional team environment + Participate in meet & greets and lunch & learns with KDP executives and other organization leaders + Receive professional development training such as networking, professional skills development and presenting + Be paired with a mentor to enhance your knowledge of other parts of the business and build your network + Complete a project from start to finish and present it and your takeaways to your team, department vice president and other KDP stakeholders **Total Rewards:** + $31.00/hour + Paid bi-weekly + $2,500.00 Sign-on Bonus, paid within first 30 days of employment **Requirements:** + Must be an undergraduate currently enrolled in a full-time academic program from an accredited college or university, majoring in Mechanical engineering, Industrial engineering, or related to manufacturing of food & beverage + Available to work 40 hours per week (M-F, 8am-5pm) + Excellent organizational skills and attention to detail with a demonstrated ability to manage multiple projects, prioritize requests, and meet deadlines + Strong communication and presentation skills including excellent listening, written, and verbal abilities + Ability to work cross-functionally, be independently driven, and a self-starter + Strong skills in Microsoft Excel and PowerPoint + Proficiency in using computer-aided design (CAD) software + Experience in a manufacturing or plant setting is a plus + Experience with SolidWorks, 3D printing or Automation is a plus **Project Management Skills:** + **Planning and organizing:** Proficiency in developing a comprehensive project plan, establishing goals, and prioritizing tasks. + **Time management:** Expertise in managing time efficiently to ensure all deadlines are met. + **Communication:** Strong ability to convey information effectively to team members, stakeholders, and clients. + **Leadership:** Competence in leading, motivating, and managing a team towards successful project completion. + **Risk management:** Skill in identifying, assessing, and mitigating project risks. + **Budgeting:** Capability of developing and overseeing the project budget. + **Problem-solving:** Aptitude for identifying and resolving issues that emerge during the project's execution. **Please note** : This position is limited to persons with permanent right to work in the United States. We incorporate HireVue, an automated interview tool, into our campus recruitment process. Please visit this link (************************************************** to learn more about HireVue and how to prepare. *We recommend checking with your campus career center for additional preparation resources such as InterviewStream, Big Interview and more. **Company Overview:** Keurig Dr Pepper (NASDAQ: KDP) is a leading beverage company in North America, with a portfolio of more than 125 owned, licensed and partners brands and powerful distribution capabilities to provide a beverage for every need, anytime, anywhere. We operate with a differentiated business model and world-class brand portfolio, powered by a talented and engaged team that is anchored in our values. We work with big, exciting beverage brands and the #1 single-serve coffee brewing system in North America at KDP, and we have fun doing it! Together, we have built a leading beverage company in North America offering hot and cold beverages together at scale. Whatever your area of expertise, at KDP you can be a part of a team that's proud of its brands, partnerships, innovation, and growth. Will you join us? We strive to be an employer of choice, providing a culture and opportunities that empower our team of ~29,000 employees to grow and develop. We offer robust benefits to support your health and wellness as well as your personal and financial well-being. We also provide employee programs designed to enhance your professional growth and development, while ensuring you feel valued, inspired and appreciated at work. Keurig Dr Pepper is an equal opportunity employer and recruits qualified applicants and advances in employment its employees without regard to race, color, religion, gender, sexual orientation, gender identity, gender expression, age, disability or association with a person with a disability, medical condition, genetic information, ethnic or national origin, marital status, veteran status, or any other status protected by law. **A.I. Disclosure:** KDP uses artificial intelligence to assist with initial resume screening and candidate matching. This technology helps us efficiently identify candidates whose qualifications align with our open roles. If you prefer not to have your application processed using artificial intelligence, you may opt out by emailing your resume and qualifications directly to **************** . Keurig Dr Pepper is an equal opportunity employer and affirmatively seeks diversity in its workforce. Keurig Dr Pepper recruits qualified applicants and advances in employment its employees without regard to race, color, religion, gender, sexual orientation, gender identity, gender expression, age, disability or association with a person with a disability, medical condition, genetic information, ethnic or national origin, marital status, veteran status, or any other status protected by law.

Full-time Description The Manufacturing Engineer Manager will lead teams related to Production, Quality and Engineering. This position is the driving force behind continuous improvement initiatives, advanced manufacturing strategies to enhance productivity, quality and cost efficiency. This position will assist with the employee health and safety. PRIMARY DUTIES & RESPONSIBILITIES · Provide leadership, mentorship, and guidance to a team of Manufacturing Engineers · Provide leadership, mentorship, and guidance to the Quality team · Ensure collaboration with Engineering, Production and Quality · Implement and champion lean manufacturing principles /methodologies to drive continuous improvement · Optimize plant layouts, equipment utilization, and material flow to reduce waste and improve throughput · Develop and implement strategies to boost production efficiency · Analyze key performance indicators , such as overall equipment effectiveness (OEE), to identify and resolve process inefficiencies · Lead the adoption of new manufacturing technologies and automation to enhance capabilities · Ensure all manufacturing processes & documentation adhere to QMS within ISO 9001 · Manage direct employee's performance reviews, training, development and disciplinary actions · Maintain compliance with all safety and environmental regulations · Other duties as assigned by manager Requirements Required Skills & Abilities · Must be able to speak, read & write in English · Lean Manufacturing/ Six Sigma · Experience in CAD/CAM software · Strong mechanical ability · Detail oriented · Strong organizational skills · Strong people & problem-solving skills Physical Requirements · Must be able to lift and move up to 40lbs independently · Must be able to sit or stand for extended periods of time Education/ Experience · Bachelor's degree in Engineering (with a focus on Manufacturing, Mechanical, or Industrial) · 5+ yrs of progressive Manufacturing Engineer Exp · 3+ yrs in a leadership/supervisory role within a manufacturing environment Other: · Salary (exempt) position - must be able to work extended hours as needed, not subject to overtime pay Salary Description Starting at $95,000 per year

About Us Ultralife Corporation is a global leader in the design and manufacture of advanced power solutions, communications, and electronics systems. Serving customers in government & defense, medical, safety & security, energy, industrial, and robotics markets, we are strategically positioned across the Americas, Europe, and Asia to meet the needs of a worldwide customer base. Summary The Engineering Manager leads manufacturing engineering operations, providing technical and people leadership to ensure safe, efficient, and compliant production. This role drives scrap reduction, labor efficiency, continuous improvement, and successful new product launches in an ISO 9001 and ISO 13485 regulated environment. Key Responsibilities Lead and develop the manufacturing engineering team; set priorities, goals, and performance metrics Drive scrap reduction, cost savings, and productivity improvements using data-driven problem solving Improve labor efficiency through process optimization, line balancing, and automation initiatives Support new product launches, pilot builds, and production ramp-ups Lead engineering change management and maintain compliant documentation Oversee controls and automation systems (PLCs, HMIs, vision, data collection) Ensure compliance with ISO 9001 and ISO 13485; support audits, CAPAs, and validation (IQ/OQ/PQ) Collaborate cross-functionally with Operations, Quality, Supply Chain, Maintenance, EHS, and R&D Qualifications Bachelor's degree in Engineering required 7-10 years of manufacturing engineering experience; 3-5 years in a leadership role Experience with regulated manufacturing (battery, electronics, medical device, or similar) Strong knowledge of process development, PFMEA, SPC, validation, and industrial automation Proven leadership, project management, and cross-functional communication skills Experience supporting new product launches and high-volume production. Prior experience in an ISO 9001 and ISO 13485 certified facility preferred. Equal Opportunity Employer Ultralife Corporation is proud to be an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. If you need assistance or accommodation during the application process, please contact our HR department at ************. The pay range for this job level is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, or other law.

fairlife, LLC is a Chicago-based nutrition company that creates great-tasting, nutrition-rich and dairy products to nourish consumers. With over $3B in annual retail sales, fairlife's portfolio of delicious, lactose-free, real dairy products includes: fairlife ultra-filtered milk; Core Power High Protein Shakes, a sports nutrition drink to support post-workout recovery; fairlife nutrition plan™, a nutrition shake to support the journey to better health. A wholly owned subsidiary of The Coca-Cola company, fairlife, LLC has been recognized by both Fast Company and Nielsen for its industry leading innovation. To learn more about fairlife and its complete line of products, please visit fairlife.com. job purpose The Digital Manufacturing Engineer will support fairlife's ambition of building a best-in-class Decision Intelligence (DI) ecosystem by serving as the bridge between our factory floor systems and our data infrastructure. This role is deeply embedded in manufacturing operations, with primary responsibility for our DI Ignition platform and the data it generates across all sites. The ideal candidate comes from a manufacturing or industrial automation background and is eager to grow their skills in SQL, Python, and cloud-based data tools. responsibilities Own and maintain the Decision Intelligence team's Ignition instances across all manufacturing sites, and partner with IT and OT teams who own enterprise Ignition administration Analyze source PLC systems, read and interpret PLC logic to identify appropriate tags, and configure them correctly in Ignition Support the connection of factory PLCs and equipment to Ignition and ensure system uptime Work closely with manufacturing, line integrators, and vendors during installation/validation/operation of factory systems (PLCs, MES, etc.) Troubleshoot data flow issues between manufacturing equipment and our IoT platform Support the configuration and maintenance of industrial data exchange tools Collaborate with the Decision Intelligence team to integrate factory data into our broader data ecosystem Develop and grow skills in SQL and Python to support reporting and analytics needs skills/qualifications Bachelor's degree in engineering, computer science, information systems, or related field 2+ years of experience in a manufacturing or industrial automation environment Experience with Ignition SCADA software, specifically: Building views and dashboards using the Perspective module Managing User Defined Types (UDTs) for scalable tag management Connecting Ignition to PLCs, SCADA platforms, and databases for telemetry data consumption Strong understanding of PLCs (Rockwell, Siemens, B&R) and MES systems, including the ability to read and interpret PLC logic to evaluate and select appropriate tags from source systems Understanding of industrial data exchange concepts: OPC, Modbus, MQTT, etc. Understanding of industrial networking and on-prem resource administration concepts Experience with SQL and/or Python preferred; willingness to learn these skills is required Experience with Azure or other cloud platforms is a plus; willingness to learn is required Growth mindset with a passion for data-driven manufacturing Excellent communication and documentation skills Ability to handle ambiguity and work in a fast paced, entrepreneurial environment Flexible working in a 24/7 manufacturing facility This position requires current authorization to work in the United States. Visa sponsorship is not available for this position. position location: Webster, NY or Coopersville, MI reports to: Director, Data Engineering travel requirements: 20-30% exempt/nonexempt: exempt *Base pay offered may vary depending on geography, job-related knowledge, skills, and experience. A full range of medical, financial, and/or other benefits, dependent on the position, is offered. Base pay range:$100,000-$120,000 USD fairlife, LLC is an equal opportunity employer. We do not discriminate on the basis of race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. All qualified applicants and employees will be given equal opportunity. Selection decisions are based on job-related factors. In addition to its nondiscrimination commitment, the Company will also provide reasonable accommodation of qualified individuals with known disabilities unless doing so would impose an undue hardship on the Company. If you have a disability and would like to request accommodation in order to apply for a position with us, please email ******************** . For Recruitment Agencies At fairlife, we manage the majority of our hiring internally through our dedicated Talent Acquisition team, which is actively engaged in direct candidate sourcing. Most of our roles are filled through applications submitted via our careers site or through direct outreach by our team. As our recruitment is primarily handled in-house, we work only occasionally with external agencies, and only those on our existing, pre-approved vendor list. At this time, we are not reviewing or expanding that list. Unsolicited resumes or submissions from external agencies not authorized by our Talent Acquisition team will be considered direct candidate applications. As such, fairlife will not assume responsibility for any placement fees associated with these submissions.

Full-time Description Weco is a value-added single-source contract manufacturer of machined components, finished fabricated sheet metal, and assembled metal products. Our three facilities encompass all aspects of metal product manufacturing including our own on-site finishing with powder, paint, and graphics capability. We serve the OEM Industrial, Healthcare/Medical Device, Aerospace/Defense, Renewable Energy, and Electronics by manufacturing both conventional and the most technically demanding items. We have been doing just that for companies from Fortune 500 to small and midsize firms since 1952. Benefits: Competitive salary and benefits package Opportunity to work with a team of talented professionals Challenging and rewarding work environment Generous Paid Time Off Several health insurance plan options with a generous employer contribution to the premium Long term disability fully paid for by the company Enhanced short term disability fully paid for by the company Life insurance fully paid for by the company Employee Assistance program Dental and vision insurance 401k plan with company match HRA and HSA options for pre-tax savings with an employer funded HRA benefit Pet insurance enrollment option Position Summary The Project Manager position will be responsible for management of high profile and complex projects from start to finish. This role will also work with employees on the shop floor to improve efficiency, safety, and quality of manufacturing processes. Duties and Responsibilities · Responsible for driving total project management solutions from quote through to shipment · Plans and designs tools, fixturing, and other mechanically functioning equipment · Develops plans and implements new machining processes. · Spearheads process optimization in both engineering and manufacturing. (automation) · Provide technical support to sales team and support customer interface accordingly · Complete detailed cost models needed to support providing quotes to customers · Comprehends and disseminates customer driven specifications called out on drawings and determine how to process the parts in accordance with the specifications required. · Works with QC to ensure all QMS requirements are being met during job routing. · Understands ISO 9001 workflow requirements and follow such procedures. · Builds B.O.M. on job routers to conform with customer material requirements called out on the print, parts list, and or contract. · Reviews customer supplied purchase orders and contracts to ensure we meet all order requirements and build notations in the work instructions. · Orders specialty material, hardware, and finishing supplies pertaining to the job or project assigned. · Works with QC to review material certifications from vendors and sign off that they meet the called-out requirements from the contract. · Effectively communicates any issues encountered while working on assigned projects back to supervisor and the customer as needed in a professional and timely manner. · Leads post and pre-production reviews on defense projects during first run or after encountering issues. · Creates measurable KPI's that will quantify success on critical to plant growth projects. · Provides support as Engineering Manager back up. · Interprets customer supplied drawings and determine the best method of manufacturing considering the equipment available and the current manufacturing schedule. · Writes work instructions in detail pertaining to any one of the fabrication processes. · Utilizes 3D CAD software to help shop floor employees better understand the manufacturing process of various parts. · 3D model customer parts using their supplied drawings utilizing CAD software. · Program machines. (laser, turret) · Supports the shop floor in any fixture design / work holding suggestions and optimize quality outcome. · Utilizes Mastercam, SolidWorks, Radan, Epicor, or similar software when required, to communicate effectively to the shop floor. · Maintains revision control of manufactured parts using our ERP system. · Other duties as assigned. Requirements Position Qualifications · Bachelors degree in Engineering or related discipline is a plus · 10 plus years of experience in hands on machining (mills and lathes) · 3+ years of experience in Project Management. Knowledge, Skills, and Abilities · Strong communication skills, both written and verbal · Excellent problem-solving skills · Attention to detail and accuracy. · Proficient in Microsoft Office. · Ability to work independently and as part of a team. · Flexibility and adaptability to changing priorities and deadlines. · Confident decision-making ability · Capable of participating in cross-functional settings and working with support functions, manufacturing, quality engineer, and facilities. · Support cost reduction & continual improvement activities. · Analyze raw data and generate usable reports. · Knowledge of print reading and understanding of common GD&T practices. · Knowledge of materials and their chemical and physical properties. Salary Description $85,000 - $100,000

Job DescriptionBuild the processes that power flight At TekPro, we're partnering with a forward-leaning aerospace component manufacturer in Rochester to expand their engineering bench. In this permanent, direct-hire opportunity, you'll contribute inside a new, state-of-the-art facility where precision, collaboration, and continuous improvement are the norm. Your impact You'll elevate how parts are programmed and how work moves-from first article to steady-state production-so teams across production, quality, design, and operations can deliver reliably, faster. Open tracks CAD/CAM Manufacturing Engineer Core requirement: Advanced Mastercam programming capability. Create CNC programs and optimized tool paths for complex geometries Provide hands-on support to fine-tune machining performance Work with production, quality, and design to improve manufacturability Lead improvements in cycle time, tooling strategies, and process robustness Process Engineer Core requirement: Significant ERP experience, ideally owning or building manufacturing workflows. Author routings and process documentation; standardize best practices Configure/integrate ERP and ensure high-fidelity, accurate data Support production planning and process readiness for new work Coordinate cross-functionally with engineering, quality, and operations What sets this apart Operate within a cutting-edge aerospace operation designed for growth Influence both programming excellence and process scalability Join a team that values disciplined problem-solving and measurable results If you're driven to craft world-class CNC programs or design ERP-enabled workflows that scale, we'd like to hear your story.

Onsite, based in Rochester, NY RPI, a global leader in print-on demand, is looking for a highly motivated Digital Print Manufacturing Engineer to lead process development and optimization across our digital print production environment. This role requires expertise in digital printing technologies, pre-press workflows, and print production validation. The ideal candidate will drive quality, efficiency, and innovation in a fast-paced, high-volume digital print setting. Key Responsibilities Collaborate with design, prepress, and operations teams to ensure seamless end-to-end production. Review proposed project scopes and provide input to optimize manufacturing efficiency. Develop, draft, and implement comprehensive test plans based on project scope, requirements, and objectives to ensure accurate validation and quality outcomes. Develop and execute validation protocols for new digital print products, processes, substrates, and equipment. Conduct print trials, performance testing, and documentation to ensure production readiness and compliance. Partner with quality and regulatory teams to maintain validation standards. Monitor print output for defects and inconsistencies; assist in root cause analysis and corrective actions. Help maintain an accurate database for all SOPs, and ensure documentation of materials testing, pre-press changes, and work instructions Maintain and update an accurate database of Standard Operating Procedures (SOPs), ensuring thorough documentation of materials testing, pre-press adjustments, and work instructions to support production consistency and compliance Assist and conduct hands-on training sessions for operators on digital print best practices, ensuring adherence to quality standards, operational efficiency, and equipment safety Qualifications 3+ years of experience in digital print manufacturing, with strong exposure to pre-press and production validation. Experience with digital print platforms such as HP Indigo, Xerox, Canon, or similar. Understanding of lean manufacturing, Six Sigma, or other process improvement methodologies. Excellent analytical, documentation, and communication skills. Self-driven and motivated, with the ability to work independently and take initiative Strong team player who thrives in collaborative environments Demonstrates ownership of tasks and a proactive approach to problem-solving Demonstrates flexibility and willingness to travel to other company locations as required to support operational needs and cross-site collaboration Preferred Skills Experience with web-to-print workflows. Knowledge of RIP software (e.g., HP, Fiery, etc), Adobe Creative Suite, and color management Familiarity with automation tools and digital press APIs. Experience with Rotary Die Cutting, Guillotine, and Book Binding equipment Knowledge of substrate behavior and ink interaction in digital environments. Project management experience in a digital print or commercial print setting. About RPI: RPI Print, headquartered in Seattle, WA, is dedicated to making brands successful through personalized print solutions. With facilities and partners worldwide, RPI offers end-to-end integrated supply chain services for digital printing on demand. Our commitment goes beyond printing; we prioritize building lasting relationships with our customers. If you believe you're a good fit for this role and share our passion for excellence, we'd love to hear from you! At RPI, we recognize the strength in diversity and strongly encourage candidates from diverse backgrounds to apply. We are committed to equal opportunity and consider qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, gender expression, national origin, age, marital status, protected veteran status, disability status, or other applicable legally protected characteristics. RPI is dedicated to providing equal employment opportunities and will make reasonable accommodations in compliance with the Americans with Disabilities Act of 1990. Please note that the job description may be periodically reviewed as duties and responsibilities evolve with business needs. Essential and other job functions are subject to modification, and reasonable accommodation may be provided to enable individuals with disabilities to perform essential functions.

Full-time Description The Manufacturing Engineer is responsible for developing, optimizing, and sustaining manufacturing processes to support efficient, high-quality production. This role involves analyzing products and production methods to improve both new and existing operations. Working collaboratively within a cross-functional team environment, the Manufacturing Engineer applies technical expertise to drive continuous improvements that reduce cycle times, enhance product quality, and deliver measurable cost savings. Duties and Responsibilities Design and implement robust manufacturing processes to ensure product stability, establish production standards, and support ongoing process improvements. Optimize and innovate manufacturing methods, equipment operations, and overall production performance to enhance efficiency and reduce waste. Collaborate cross-functionally with engineering, production, and other departments to troubleshoot issues and resolve production challenges. Research, recommend, and integrate new technologies and systems to upgrade manufacturing capabilities and drive innovation. Prepare accurate and timely quotes in response to customer deadlines, ensuring feasibility and alignment with production capabilities. Design and develop end-to-end manufacturing solutions including processes, tooling and fixtures, CNC programs, and detailed work instructions. What We Offer Competitive salary based on experience Career development opportunities Climate-controlled work environment State-of-the-art machinery and equipment Benefits: 401(k) Dental insurance Health insurance Life insurance Paid time off Vision insurance Requirements Qualification Requirements Bachelor's degree in Engineering preferred. Prior experience as a Manufacturing Engineer or in a similar role is strongly preferred. Proficient in CAD/CAM software, including SolidWorks, Mastercam, and PartMaker. Knowledge of CNC manufacturing equipment and quality assurance methodologies. Skilled in Microsoft Office Suite and experienced with ERP systems. Strong project management, problem-solving, and multitasking capabilities. Demonstrated commitment to maintaining health and safety standards. Able to work both independently and collaboratively within a team environment. Environment & Physical Demands Regularly required to stand, walk, stoop, kneel, crouch, and communicate effectively (talk/hear). May involve prolonged periods of both sitting and standing depending on task requirements. Specific vision abilities include close vision, distance vision, peripheral vision, depth perception, and the ability to adjust focus; prolonged magnified inspection may be required, which can lead to eye strain. Requires good hand-eye coordination and dexterity in hands, arms, and fingers, including the ability to grasp and manipulate small components. Frequent use of computers and other standard office or manufacturing equipment. May involve handling of oils, solvents, and cleaning solutions-lab coats provided to minimize exposure. Typically performed in a clean environment; employees are expected to help maintain cleanliness standards. Safety glasses are required at all times; additional safety training may be required depending on the area. The work is performed in a manufacturing setting where noise levels are generally loud. May rotate between different workstations or shift tasks during the production process based on operational needs.

The Manufacturing Engineer is responsible for developing, optimizing, and sustaining manufacturing processes to support efficient, high-quality production. This role involves analyzing products and production methods to improve both new and existing operations. Working collaboratively within a cross-functional team environment, the Manufacturing Engineer applies technical expertise to drive continuous improvements that reduce cycle times, enhance product quality, and deliver measurable cost savings. Duties and Responsibilities * Design and implement robust manufacturing processes to ensure product stability, establish production standards, and support ongoing process improvements. * Optimize and innovate manufacturing methods, equipment operations, and overall production performance to enhance efficiency and reduce waste. * Collaborate cross-functionally with engineering, production, and other departments to troubleshoot issues and resolve production challenges. * Research, recommend, and integrate new technologies and systems to upgrade manufacturing capabilities and drive innovation. * Prepare accurate and timely quotes in response to customer deadlines, ensuring feasibility and alignment with production capabilities. * Design and develop end-to-end manufacturing solutions including processes, tooling and fixtures, CNC programs, and detailed work instructions. What We Offer * Competitive salary based on experience * Career development opportunities * Climate-controlled work environment * State-of-the-art machinery and equipment Benefits: * 401(k) * Dental insurance * Health insurance * Life insurance * Paid time off * Vision insurance Requirements Qualification Requirements * Bachelor's degree in Engineering preferred. * Prior experience as a Manufacturing Engineer or in a similar role is strongly preferred. * Proficient in CAD/CAM software, including SolidWorks, Mastercam, and PartMaker. * Knowledge of CNC manufacturing equipment and quality assurance methodologies. * Skilled in Microsoft Office Suite and experienced with ERP systems. * Strong project management, problem-solving, and multitasking capabilities. * Demonstrated commitment to maintaining health and safety standards. * Able to work both independently and collaboratively within a team environment. Environment & Physical Demands * Regularly required to stand, walk, stoop, kneel, crouch, and communicate effectively (talk/hear). * May involve prolonged periods of both sitting and standing depending on task requirements. * Specific vision abilities include close vision, distance vision, peripheral vision, depth perception, and the ability to adjust focus; prolonged magnified inspection may be required, which can lead to eye strain. * Requires good hand-eye coordination and dexterity in hands, arms, and fingers, including the ability to grasp and manipulate small components. * Frequent use of computers and other standard office or manufacturing equipment. * May involve handling of oils, solvents, and cleaning solutions-lab coats provided to minimize exposure. * Typically performed in a clean environment; employees are expected to help maintain cleanliness standards. * Safety glasses are required at all times; additional safety training may be required depending on the area. * The work is performed in a manufacturing setting where noise levels are generally loud. * May rotate between different workstations or shift tasks during the production process based on operational needs.

Our award-winning client is seeking an Manufacturing Engineer to join their team! The Manufacturing Engineer will play a critical role in optimizing production processes and improving overall manufacturing efficiency. This position requires a strong technical background, problem-solving skills, and a passion for continuous improvement. The ideal candidate will be able to identify and implement innovative solutions to enhance product quality and reduce costs. Responsibilities: Identify and implement process improvements to optimize efficiency and reduce costs. Develop and maintain detailed standard work instructions for all production processes. Investigate and resolve root causes of quality issues and customer complaints using problem-solving methodologies (e.g., 8D). Design and implement tooling, fixtures, and automation solutions to improve productivity and reduce cycle times. Provide technical support to manufacturing teams, including troubleshooting equipment and training operators. Analyze production data to identify trends, bottlenecks, and opportunities for improvement. Work closely with plant management, engineering, and operations teams to achieve manufacturing goals. Required Qualifications: Bachelor's degree in Mechanical Engineering, Industrial Engineering, or a related field. 3+ years of experience in manufacturing engineering or a related field. Strong understanding of manufacturing processes, including metal cutting, forming, and welding. Proficiency in CAD software (e.g., AutoCAD) and PLC programming. Knowledge of Lean Manufacturing, Six Sigma, and other continuous improvement methodologies. Excellent problem-solving, analytical, and communication skills. Ability to work independently and as part of a team.

Client is seeking a motivated and detail-oriented Mid-level manufacturing engineer to join our team. This role is ideal for individuals who are passionate about assembly integration and testing of low volume, high-precision products. The selected candidate will work both independently and collaboratively to review, plan, integrate, and test unique opto-mechanical and thermoelectric products in a low volume setting. Key Responsibilities: Perform tasks in a manufacturing and/or prototyping environment. Review and provide feedback on electro-mechanical and opto-mechanical drawings and designs. Translate drawing requirements into detailed work instructions for the assembly, integration, and testing of complex end-products. Coordinate with various disciplines to ensure program schedule milestones are met. Own product schedule development coordinate across disciplines to ensure agreement amongst stakeholders. Troubleshoot issues individually and collaboratively to find quick and safe solutions that minimize schedule delays. Balance multiple projects and priorities and communicate clearly to operations leadership. Maintain accurate records and manufacturing documentation. Adhere to established policies, procedures, and proper labor charging practices. Be willing to work overtime, weekends, holidays, and travel as needed. Requirements: Bachelor's Degree or equivalent. 2-8 years of relevant experience in manufacturing and/or prototyping environment. Preferred Additional Skills: Experience in the Aerospace or Defense industry. Familiarity with machinery, machine building, and precision engineering. Experience with Optical Metrology. Knowledge of mechanical builds and tolerances, including GD&T (Geometric Dimensioning and Tolerancing).

Job Description About the job: Plans, coordinates and directs the manufacturing process as it relates to producing product on a Davenport multi-spindle screw machine. Opportunities for growth: Training is provided to further the knowledge of manufacturing engineering specific to company policies and standards as well as other areas of the business. Essential Functions & Responsibilities: Develops, evaluates and improves manufacturing methods, utilizing knowledge of product design, materials, fabrication processes, tooling and production equipment capabilities, assembly methods, and quality control standards. Conducts engineering activities within the department including design and drawing part prints, process layouts, tooling and gauges Confers with engineering personnel to provide cycle time estimates and process design for new quoting opportunities. Confers with management, engineering, and other staff regarding manufacturing capabilities, production schedules, and other considerations to facilitate production processes. Confers with engineering and production teams to solve performance/operational issues to improve operational efficiency. Ability to read and translate customer blueprints including; raw materials, secondary processes and geometric tolerancing is required. Familiarity with CAD/CAM software (Cadkey, Autocad, Key Creator, Solid Works) is required. Develops corrective actions to findings from internal and external quality audits Experience with internal audits and familiarity with quality standards including; IATF 16949-2016, ISO 9001-2015 and AS9100D is required. Minimum Experience: 5 years related manufacturing engineering experience. Other Requirements: Ability to work collaboratively to solve problems relative to area of responsibility. Ability to adhere to safety rules, policy and procedures. Ability to adhere to employee rules, policy and procedures. Gates Albert Offers a stable environment, excellent benefits, 401(k) match and career growth. EOE, including disability/vets Job Posted by ApplicantPro

FOR INTERNAL USE ONLY Manufacturing Engineering Grade: LP1 EEOC Classification: Professionals FLSA Status: Exempt About Advanced Atomization Technologies Advanced Atomization Technologies (AA TECH) is a joint venture between Parker Aerospace and GE Aviation, created to produce and support advanced fuel nozzles and related products for current and future commercial engine platforms, including aerospace and aero-derivative engines. The highly skilled and experienced team of AA TECH employees is expert in design, assembly, testing, and aftermarket support, providing our customers with a world-class product and support experience. AA TECH offers a comprehensive and competitive compensation and benefits package, including: Variable Incentive Plan (Bonus Eligibility) Health, Dental, and Vision Insurance with HSA Company Contribution 401k Plan with Employer Match Tuition Reimbursement 12 Paid Holidays Vacation Accrual Position Summary: A Lead Professional 1 - Engineering is an experienced manufacturing engineer (approximately 10+ years engineering experience) with leadership aspirations that will heavily influence the technical direction of the assigned value stream. The successful candidate will be responsible for the operational excellence and success of an assigned value stream which will come from leading continuous improvement efforts, maintaining Value Stream health, and establishing strong working relationships with teammates, engineering leadership and operational leadership. Key Responsibilities: Ownership of Technical Support for assigned value stream Accountable to the High-Performance Value Stream metrics and initiatives Accountable for the execution of the Strategy Deployment initiative Process development, documentation, and support Value stream health (FTY, scrap, MDR Onset, TPM) Inventory management support (MSS, Solumina, Comp Cards) Problem Solving (RCCA, PDCA, Shainin, etc) Operational training support Ownership of Technical Compliance for assigned value stream AS13100 Support and Execution Process / Product Correlation Process Engineering Change Order process Metallurgical qualification and compliance (ES6-26 process) Returned Goods process Ownership of Technical support for Lean / Continuous Improvement Value Stream Mapping Process Capability Analysis Process Optimization Data Analysis Process Mistake Proofing (Identification and implementation) Ownership of Technical support for Environmental Health and Safety Facilitate and support the performing of ergonomic assessments on processes Facilitate, lead, and support the implementation of ergonomic improvement projects Ownership of machine safety for all equipment within the value stream Value Stream Strategy Deployment Technical Ownership of the long-term strategy Technical Ownership of short term AOP Project Identification Technical Ownership of Annual SD Project Execution Talent Development execution for team members (Mfg Eng Techs, Mfg Eng I, Mfg Eng II) Facilitation of training opportunities and direction Mentoring technical resources for assigned value stream Mentoring technical resources for the engineering team Required Qualifications: Bachelor's degree (BS) in Manufacturing Engineering or related engineering field. 10+ years engineering experience or equivalent in a manufacturing environment Basic knowledge of Profit and Loss statements for value streams Basic knowledge of manufacturing processes, principles and concepts Basic knowledge of lean principles for manufacturing Basic knowledge of quality principles for manufacturing Read and understand GD&T requirements of product drawings Understand process capability theory Familiarity with joining processes (braze, weld, etc.) CAD modeling and drafting experience Basic blueprint reading and interpretation Strong mechanical aptitude Ability to interface with multiple levels of the organization Effective communication skills: verbal and written Ability to function in a team environment Ability to use Microsoft software programs (i.e. Word, Excel, PowerPoint) Desired Qualifications: Experience leading technical teams Experience working with supply chain Minitab or equivalent stat software CREO and/or Unigraphics modeling software experience Six Sigma experience or certification Due to the Company's military contractor status, the applicant must be a U.S. citizen or a permanent resident of the United States and must provide evidence of citizenship or immigration status upon applying for the position. Advanced Atomization Technologies, LLC is an equal opportunity employer and gives consideration for employment to qualified applicants without regard to race, color, religion, sex, sexual orientation, age, national origin, disability, protected veteran status, or any other consideration made unlawful by federal, state or local laws. ("Minority/Female/Disability/Veteran/VEVRAA Federal Contractor”). Typical Mental and Physical Demands: While performing the duties of this job, the employee may be required to sit. The employee frequently is required to use hands to operate a computer. The employee is occasionally required to stand and walk. Specific vision abilities required by this job include close vision. Also expected of the employee is regular attendance, the ability to work cooperatively and professionally with others and members of the public, and the ability to manage multiple tasks at once. (The essential functions have been provided as examples of types of work performed by employees assigned to this job classification. The Company reserves the right to modify the work assignments and/or to make reasonable accommodations so that qualified employees can perform the essential functions of the job. The physical and mental demands described above are representative of those required to successfully perform the essential functions of this job.)

Gleason offers Total Gear Solutions to its global customer base. We are a leader in the development and manufacture of production systems for all types of gears including design software for gears and power transmission systems, gear production machinery, metrology systems, automation solutions, related equipment, and plastic gears. The competence center for automation that provides material handling, machine tending, and automated assembly solutions is located in Rochester, NY. We are looking for an automation controls engineer to join the team The person in this role will develop, test, and optimize PLC, HMI, and robot programs for the systems manufactured at Gleason Automation Systems in Rochester, NY. The automation controls engineer is a key member of the project team from order to final acceptance and supports sales and field service to ensure that we meet customer expectations. Job Responsibilities: Develop PLC, HMI and robot programs for new system requirements using multiple brands of controls hardware and various software languages (Siemens, Allen-Bradley, Fanuc, Kuka, ABB, Denso) Collaborate with our hardware controls engineers on component selection and design Collaborate with our mechanical engineers on solution design using robot simulation tools Test electromechanical devices of the assembled system Verify software functions and validate overall system operation Support field service personnel Manage tasks and project deliverables in accordance with project schedule Drive continuous improvement in software development and testing to exceed customer specifications Qualifications (Knowledge, Skills & Abilities): Proficiency with PLC, HMI and robot programming for industrial automation equipment. Experience with information systems as applied to industrial automation equipment. Experience with automation components e.g., sensors, pneumatics, vision systems Proficiency with networking communications e.g., EtherNet/IP, ProfiNet Ability to collaborate with other engineers and disciplines to communicate technical information and effectively contribute to meetings, discussions and brainstorming sessions Strong electromechanical aptitude Must be able to work productively within a team environment Ability to work independently and with minimal supervision Must have strong written and oral communication skills Proven ability to efficiently manage time and prioritize multiple tasks. Preferred Education/Training/Experience: Bachelor's Degree (BS) in engineering or Associate's Degree from an automation related program With experience in PLC or robot programming Computer Skills: Microsoft Office (Outlook, Word, Excel, PowerPoint) Travel Requirements: 10%

TekPro Engineering is partnered with a world-class precision manufacturing company in the Rochester, NY area that produces high-precision machined components for quality-critical industries including aerospace, aircraft, medical, and advanced manufacturing. The company operates out of a modern, climate-controlled, state-of-the-art facility and is committed to continuous investment in technology, process improvement, and long-term employee development. This is a direct hire opportunity offering strong stability, competitive compensation, and clear future career growth. Process Engineer Role The Process Engineer will develop, maintain, and improve manufacturing processes within a lean manufacturing environment. This role works closely with customers and cross-functional internal teams to optimize production methods, improve quality, reduce cycle times, and drive cost savings. Unlike many salaried engineering roles, this position is hourly, ensuring employees are compensated at 1.5x overtime rates for any additional hours worked. Key Responsibilities Support manufacturing operations in productivity and quality improvements Assure product and process quality by designing test methods and establishing standards Develop and maintain manufacturing process flows Design and support tooling, fixturing, and gaging Utilize CAD for fixtures, prints, and models Collaborate with engineers, contractors, and suppliers Optimize processing capabilities using continuous improvement principles Assist in the design and machining of new and existing features Support root cause analysis and corrective action activities Interpret blueprints and apply strong GD&T knowledge Qualifications Bachelor's or Master's degree in Engineering preferred (or equivalent experience) 1-3 years of experience as a Process Engineer or similar role preferred Familiarity with manufacturing equipment and quality assurance techniques Strong blueprint reading and GD&T proficiency Experience with tooling, fixturing, and process optimization Project management and problem-solving skills Ability to work independently and contribute within a team environment Ongoing commitment to health and safety standards What's Offered Direct hire, full-time position Hourly pay structure with 1.5x overtime Competitive compensation based on experience Strong future career growth and advancement opportunities Climate-controlled, modern manufacturing environment State-of-the-art machinery and equipment Benefits Include: 401(k) Medical, Dental, Vision Insurance Life Insurance Paid Time Off If you're looking for a stable, long-term engineering role where your work directly impacts manufacturing performance-and where overtime is fairly compensated-this opportunity is worth exploring.

Job Overview:Summer 2026 Intern - Manufacturing Engineering As a Summer 2026 Intern - Manufacturing Engineering at Keurig Dr Pepper (KDP), you will be working in a high speed, fast paced manufacturing environment during a large project installation and start up at the Motts plant. This role will expose you to different phases of capital project management and give you the opportunity to develop and implement improvements to new or existing manufacturing equipment and processes. Each intern will have real responsibilities and will be provide ample opportunity to grow professionally. Shift/Schedule: The KDP 2026 Summer Internship Program will run from June 1 - August 7, 2026Full-time; 40 hours per week Monday-Friday 8:00am until 5:00pm In-Person in our Williamson, NY facility As a Manufacturing Engineering Intern you will: Gain knowledge in executing operational plans and new manufacturing equipment and processes during a large project installation and start up. Analyze, design, implement and improve existing processes to increase efficiency and reduce costs Collaborate with cross-functional teams to identify and solve production issues Assist with TPM (Total Productive Maintenance) implementation and Lean activities, including participation in Continuous Improvement or Kaizen events and developing, implementing and improving autonomous and preventive maintenance workstreams Assist in overseeing a large project installation and start up, including documenting open items, tracking progress, interacting with contractors, site management, and front-line employees Elements of the KDP Internship Program include: Engaging and partnering on innovative projects to gain experience in a challenging, cross functional team environment Participate in meet & greets and lunch & learns with KDP executives and other organization leaders Receive professional development training such as networking, professional skills development and presenting Be paired with a mentor to enhance your knowledge of other parts of the business and build your network Complete a project from start to finish and present it and your takeaways to your team, department vice president and other KDP stakeholders Total Rewards:$31. 00/hour Paid bi-weekly $2,500. 00 Sign-on Bonus, paid within first 30 days of employment Requirements:Must be an undergraduate currently enrolled in a full-time academic program from an accredited college or university, majoring in Mechanical engineering, Industrial engineering, or related to manufacturing of food & beverage Available to work 40 hours per week (M-F, 8am-5pm) Excellent organizational skills and attention to detail with a demonstrated ability to manage multiple projects, prioritize requests, and meet deadlines Strong communication and presentation skills including excellent listening, written, and verbal abilities Ability to work cross-functionally, be independently driven, and a self-starter Strong skills in Microsoft Excel and PowerPoint Proficiency in using computer-aided design (CAD) software Experience in a manufacturing or plant setting is a plus Experience with SolidWorks, 3D printing or Automation is a plus Project Management Skills: Planning and organizing: Proficiency in developing a comprehensive project plan, establishing goals, and prioritizing tasks. Time management: Expertise in managing time efficiently to ensure all deadlines are met. Communication: Strong ability to convey information effectively to team members, stakeholders, and clients. Leadership: Competence in leading, motivating, and managing a team towards successful project completion. Risk management: Skill in identifying, assessing, and mitigating project risks. Budgeting: Capability of developing and overseeing the project budget. Problem-solving: Aptitude for identifying and resolving issues that emerge during the project's execution. Please note: This position is limited to persons with permanent right to work in the United States. We incorporate HireVue, an automated interview tool, into our campus recruitment process. Please visit this link to learn more about HireVue and how to prepare. *We recommend checking with your campus career center for additional preparation resources such as InterviewStream, Big Interview and more. Company Overview:Keurig Dr Pepper (NASDAQ: KDP) is a leading beverage company in North America, with a portfolio of more than 125 owned, licensed and partners brands and powerful distribution capabilities to provide a beverage for every need, anytime, anywhere. We operate with a differentiated business model and world-class brand portfolio, powered by a talented and engaged team that is anchored in our values. We work with big, exciting beverage brands and the #1 single-serve coffee brewing system in North America at KDP, and we have fun doing it! Together, we have built a leading beverage company in North America offering hot and cold beverages together at scale. Whatever your area of expertise, at KDP you can be a part of a team that's proud of its brands, partnerships, innovation, and growth. Will you join us? We strive to be an employer of choice, providing a culture and opportunities that empower our team of ~29,000 employees to grow and develop. We offer robust benefits to support your health and wellness as well as your personal and financial well-being. We also provide employee programs designed to enhance your professional growth and development, while ensuring you feel valued, inspired and appreciated at work. Keurig Dr Pepper is an equal opportunity employer and recruits qualified applicants and advances in employment its employees without regard to race, color, religion, gender, sexual orientation, gender identity, gender expression, age, disability or association with a person with a disability, medical condition, genetic information, ethnic or national origin, marital status, veteran status, or any other status protected by law. A. I. Disclosure: KDP uses artificial intelligence to assist with initial resume screening and candidate matching. This technology helps us efficiently identify candidates whose qualifications align with our open roles. If you prefer not to have your application processed using artificial intelligence, you may opt out by emailing your resume and qualifications directly to kdpjobs@kdrp. com.

About Us Ultralife Corporation is a global leader in the design and manufacture of advanced power solutions, communications, and electronics systems. Serving customers in government & defense, medical, safety & security, energy, industrial, and robotics markets, we are strategically positioned across the Americas, Europe, and Asia to meet the needs of a worldwide customer base. Summary The Engineering Manager leads manufacturing engineering operations, providing technical and people leadership to ensure safe, efficient, and compliant production. This role drives scrap reduction, labor efficiency, continuous improvement, and successful new product launches in an ISO 9001 and ISO 13485 regulated environment. Key Responsibilities Lead and develop the manufacturing engineering team; set priorities, goals, and performance metrics Drive scrap reduction, cost savings, and productivity improvements using data-driven problem solving Improve labor efficiency through process optimization, line balancing, and automation initiatives Support new product launches, pilot builds, and production ramp-ups Lead engineering change management and maintain compliant documentation Oversee controls and automation systems (PLCs, HMIs, vision, data collection) Ensure compliance with ISO 9001 and ISO 13485; support audits, CAPAs, and validation (IQ/OQ/PQ) Collaborate cross-functionally with Operations, Quality, Supply Chain, Maintenance, EHS, and R&D Qualifications Bachelor's degree in Engineering required 7-10 years of manufacturing engineering experience; 3-5 years in a leadership role Experience with regulated manufacturing (battery, electronics, medical device, or similar) Strong knowledge of process development, PFMEA, SPC, validation, and industrial automation Proven leadership, project management, and cross-functional communication skills Experience supporting new product launches and high-volume production. Prior experience in an ISO 9001 and ISO 13485 certified facility preferred. Equal Opportunity Employer Ultralife Corporation is proud to be an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. If you need assistance or accommodation during the application process, please contact our HR department at ************. The pay range for this job level is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, or other law.