Mechanic jobs in Grenada, MS

Weyerhaeuser is currently seeking a Mobile Equipment Mechanic at our mill in McComb, MS. Rate of pay is $31.31 Key Functions: Perform service/preventative maintenance, run inspections, diagnostics tests, and repair/maintain mobile equipment and vehicles for a lumber manufacturing facility Inspect, maintain, troubleshoot and repair malfunctions in diesel/gas engines, air brake equipment, running gear and hydraulics Rivet, bolt, glue, braze or weld to fabricate, modify or design replacement parts for equipment Fabricate, cut, shape, and perform finish operations using various types of materials Perform periodic service / PMs on forklifts, front-end loaders, log moving equipment, pick-ups, etc. Qualifications: High School diploma/GED (or higher) 18 years of age or older Valid Driver's License and clean driving record, which must be maintained 3-5 years heavy mechanical repair experience, OR an equivalent combination of education/work experience Experience reading and interpreting schematics and parts breakdown Basic computer skills Ability to perform essential job functions, such as lifting up to 50 pounds occasionally; stooping, bending, kneeling, crouching, crawling, balancing, and climbing; and exposure to equipment that intensifies the heat factor on an occasional basis Proven ability to work independently, under limited supervision Flexibility to work any shift, weekends, overtime, holidays as needed Able to complete mobile equipment training Required Basic Competencies: Verbal comprehension (understand oral and written communications-both general and technical) Skilled in providing clear instructions/directions Reasoning, problem solving and troubleshooting skills Mechanical aptitude Work safely to prevent on the job accidents and injuries Wear protective equipment such as hearing protection, safety-toe boots, or safety glasses Able to successfully pass pre-employment drug test, background and motor vehicle record check Environmental Conditions: Work outside in all weather conditions, in tight spaces, and on occasion at elevated heights Preferred Qualifications: Two years of diesel mechanic experience Completion of a mechanical vocational or trade school program About Wood Products We've been delivering quality building products and solutions to our customers for more than 100 years. From builders and dealers to specifiers and homeowners, we offer exceptional product performance and unparalleled support. For more than a century, we've been building our reputation as a leader in sustainable wood products. About Weyerhaeuser We sustainably manage forests and manufacture products that make the world a better place. We're serious about safety, driven to achieve excellence, and proud of what we do. With multiple business lines in locations across North America, we offer a range of exciting career opportunities for smart, talented people who are passionate about making a difference. We know you have a choice in your career. We want you to choose us. Weyerhaeuser is an equal opportunity employer. Inclusion is one of our five core values and we strive to maintain a culture where all our people feel a sense of belonging, opportunity and shared purpose. We are committed to recruiting a diverse workforce and supporting an equitable and inclusive environment that inspires people of all backgrounds to join, stay and thrive with our team.

Join the winning team at Plaza Tire Service! In business since 1963, Plaza Tire Service is a growing company with 75 locations. Plaza Tire Service is big enough for you to make a career, and small enough to care that you do. The Automotive Technician is responsible for effectively and efficiently diagnosing and repairing customer vehicles while adhering to the MAP guidelines and in accordance with dealership, manufacturer's, and company repair standards. We have an immediate opening for an Automotive Technician COMPENSATION: $35.00/Hr to $45.00/Hr. Benefits: Competitive Weekly Pay Tuition Reimbursement Paid Vacation and Sick Time 6 Paid Holidays Medical, Dental and Vision Insurance Life Insurance (Company paid) 401(k) Retirement Savings Plan with Company Match Discounted Services on Personal and Immediate Family Vehicles Opportunity for Advancement!!! Principal Duties and Responsibilities: As a Plaza Tire Service Automotive Technician, you'll perform hands-on work on customer vehicles daily and direct the other shop personnel. This work can encompass a broad array of activities. Brake jobs Suspension components Alignments Front end parts Preventive maintenance items Tire repair/replacement Oil changes And more Qualifications: Previous automotive technician / mechanic experience required Possess current and valid Driver's license Must be at least 18 years old Working Conditions and Physical Demands: The Automotive Technician will be exposed to moderate to loud noises, dust, exhaust fumes, lubricants, petroleum products, vapors, caustic materials, and other hazardous and non-hazardous materials. The temperature in the work environment varies and could include extreme heat and/or extreme cold depending on the ambient temperatures outside. The use of safety goggles or other PPE may be required when working in these conditions. The Automotive Technician must be able to meet the following physical requirements: Stand up to eight hours per day in the shop and able to walk to gain access to various areas of the building Bend, stoop, kneel and crouch regularly throughout the day; must have full range of motion with arms and hands and be able to feel, handle or finger objects frequently Lift and/or move up to 10 pounds regularly, lift and/or move up to 70 pounds frequently. Communicate with customers and shop personnel Vision sufficient to detect color, depth, and re-focus Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Sun Auto Tire & Service provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

To perform preventive maintenance and repairs on designated passenger and freight elevators, escalators, dumbwaiters and moving sidewalks according to schedule and in accordance with industry safety practices. To troubleshoot defective equipment, make repairs and respond promptly to service and call back requests. To perform all duties in accordance with established protocols and industry safety standards. To gather data and submit written reports. To guide, train and oversee the work of the elevator mechanic assistants. To assist other team members with daily work and special projects. To use assigned communication device to read and respond to texts, emails and service requests in a timely manner. May be asked to complete the NAEC CETTM training program based on department need. ESSENTIAL JOB FUNCTIONS TO INCLUDE: * Performs routine cleaning on designated elevators and equipment rooms. Performs duties such as blowing out generators, motors, selectors and controllers, wiping down all above equipment; cleaning hoistway doors, tracks, sills, elevator cars, and other related equipment. Paints elevator machine rooms, equipment, car tops and pit as needed. Maintains a clean and organized worksite. Maintains tools, equipment and inventory. * Completes scheduled and detailed maintenance inspection of assigned elevators. Makes necessary adjustments, parts replacement, and repairs to elevators as necessary. Performs major repairs and required safety tests according to code. * Performs scheduled maintenance and minor repair to equipment room electrical systems which includes replacing defective lights checking, cleaning and replacing contacts in elevator controller and selector relays; coils, fuses; motors; generator brushes; defective wiring; terminals; resistors, diodes and other components on panels. * Performs scheduled and minor repairs to elevators and hoistway electrical systems which includes but is not limited to replacing defective lights; push buttons; covers; switches; electric eyes; door operator motors; wiring; gongs/bells; indicator sockets covers; safety edge and electric eye cords. * Performs scheduled maintenance and minor repairs to elevator and hoistway mechanical systems, which includes but is not limited to replacing door rollers and gibs; release rollers and release roller assemblies; defective belts and cables under supervision; adjusting doors; repairing/replacing door closure assemblies; adjusting leveling apparatus and inspecting all cables. * Responds to all calls and breakdown of assigned elevators in a prompt and timely manner, with maximum response time of one hour, and all emergency calls upon any elevator. * Guides, trains, and oversees the work of the Elevator Mechanic Assistant(s). Assists other department personnel in completion of more extensive repairs within all areas. * Gathers data and submits written reports. * Perform all duties in accordance with established protocols and industry safety standards. * Actively participates in ongoing department training. Pursues specialized training and certifications to stay abreast of industry changes and to advance expertise. Uses assigned communication device to read and responds to texts, emails and service requests in a timely manner. Interacts with customers, visitors, students, staff and others in a friendly, respectful, helpful and professional manner. * Performs other duties as assigned. Knowledge/Skills/Abilities: * Ability to perform basic electrical and mechanical work * Ability to read basic electrical and mechanical drawings * Ability to learn, practice and adhere to safety standards * Ability to perform basic electrical and mechanical work * Ability to read basic electrical and mechanical drawings * Ability to solve problems and troubleshoot issues * Ability to understand general arithmetic * Ability to perceive and distinguish color-coded wiring components * Written and verbal communication skills * Ability read and write and be able to comprehend written and oral instruction * Ability to successfully complete any required training courses and remain current * Ability to maintain normal attention spans, with intermittent periods of high concentration, to assist the mechanic in electrical and mechanical installation, repair or service operations * Ability to train others * Ability to work independently and as part of a team * Must be self-directed/self-motivated Starting Hourly Rate: $32.25 - $48.42 (Commensurate with experience & qualifications) Work Schedule: Monday - Friday, 7:00 a.m. - 4:00p.m. (subject to change to meet the needs of the University). Qualifications: Associate's degree in a related field and two (2) years of related experience required. Work experience may substitute for education requirement. Licenses/Certifications/Registrations: Currently licensed with an Elevator Mechanic's License by the Alabama Department of Labor required. Driving record should meet University underwriting guidelines to drive vehicle in performance of University business. Current underwriting guidelines include possession a valid driver's license, issued in the United States; at least 21 years of age; at least three years of driving experience; maintain an acceptable Motor Vehicle Record (MVR). Personal: Possess the necessary physical requirements, with or without the aid of mechanical devices, to safely perform the duties and responsibilities of this position to include: * Performing tasks requiring bending, stooping, kneeling, and walking significant distances between and within buildings on campus. * Lifting and carrying a minimum of fifty (50) pounds. * Ability to climb stairs, ladders and scaffolding, and working at heights above thirty (30) feet. * Ability to work in confined spaces. * Ability to work within extreme temperature ranges. Incomplete job profiles will not be processed. Please be certain to showcase depth and breadth of experience on your application and resume, as they relate to the needs of the job announcement. For more information about UAB Facilities, please visit: ******************************* UAB is an Equal Employment/Equal Educational Opportunity Institution dedicated to providing equal opportunities and equal access to all individuals regardless of race, color, religion, ethnic or national origin, sex (including pregnancy), genetic information, age, disability, and veteran's status. As required by Title IX, UAB prohibits sex discrimination in any education program or activity that it operates. Individuals may report concerns or questions to UAB's Assistant Vice President and Senior Title IX Coordinator. The Title IX notice of nondiscrimination is located at uab.edu/titleix.

Who we are: Would you like to work for a stable, secure, and fast-growing airline where you will be stimulated, challenged, and have the opportunity to develop your career? If so, read on! Come and work with the best of the best at Envoy Air where you will join a team committed to providing outstanding service. We offer: Amazing employee flight privileges within the American Airlines global network Training and development programs to take your career to the next level Comprehensive health and life benefits (subject to location) Responsibilities Responsibilities Ensure our fleet meets aircraft standards as required by the Federal Aviation Administration (FAA) Maintain the airworthiness of aircraft and all their components while in service or while undergoing scheduled overhaul maintenance Completed tasks according to FAA regulations, company policies and procedures, and instructions from Crew Chiefs, Supervisors and Managers Certify the quality of personal workmanship, including signing mechanical flight releases for field work Complete necessary paperwork and computer entries for any maintenance performed A wide variety of duties are performed such as dismantling, overhauling, repairing, fabricating, assembling, welding and erecting all parts of an aircraft; which includes airframe, engines, radio equipment, instruments, electrical systems, heating systems, cooling systems, and hydraulic systems Test and inspect parts, subassemblies or completed assemblies Assure the shop/work area is maintained in a safe and orderly manner. If qualified, may be responsible for taxiing and towing aircraft for maintenance purposes Qualifications Position Requirements Minimum Age: 18 High school diploma or GED equivalent Valid Airframe & Powerplant (A&P) license Valid state driver's license; some license restrictions may prohibit a candidate from being considered for this position Ability to differentiate colors such as: red, green, yellow, blue, black, brown, white and orange Ability to lift items weighing up to 60 lbs. Willing and able to work rotating shifts including, nights, holidays, weekends and days off Demonstrated ability to communicate effectively both orally and in writing Possess the legal right to work in the United States Must be able to read, write, fluently speak and understand the English language Position Preferences A minimum of one (1) year of aircraft maintenance experience FCC General Radio Telephone Operators license Additional Details Mechanics must maintain a valid passport and the ability to travel freely to and from all of the cities/countries served by our Airline in order to complete field trips This position is covered by a collective bargaining agreement (unless in Abilene, TX) Must fulfill FAA criminal background checks to qualify for unescorted access privileges to airport security identification display areas (SIDA), if applicable Must be able to secure appropriate airport authority and/or US Customs security badges, if applicable If applicable, Federal law requires Envoy to determine an applicant's history of Department of Transportation (DOT) drug and/or alcohol violation(s) or refusal(s) to test before hiring him/her into a safety-sensitive position Envoy Air Inc., a wholly owned subsidiary of American Airlines Group, provides regional flight service to American Airlines under the American Eagle brand and ground handling services for many American Airlines Group flights. The company was founded in 1998 as American Eagle Airlines, Inc., following the merger of several smaller regional carriers to create one of the largest regional airlines in the world. Envoy is headquartered in Irving, Texas, with hubs in Dallas/Fort Worth, Chicago and Miami, with a large ground handling operation in Los Angeles. Connect with Envoy on Twitter @EnvoyAirCareers, on Instagram @EnvoyAirCareers, and on Facebook at Facebook.com/envoyaircareers and Facebook.com/EnvoyPilotRecruitment. We can recommend jobs specifically for you! Click here to get started.

We are looking for a Fleet Mechanic to inspect, diagnose, repair, and maintain fleet vehicles and equipment to ensure safe and efficient operation. Key Responsibilities: Inspect & Diagnose - Identify mechanical, electrical, and hydraulic issues. Repairs & Maintenance - Perform oil changes, brake repairs, tire replacements, and engine diagnostics. Record-Keeping - Maintain accurate service records in computer-based systems. Safety Compliance - Ensure vehicles meet all safety and regulatory standards. Parts Management - Order and replace worn or damaged parts. Collaboration - Work with drivers and fleet managers to address concerns. Qualifications: Age & Tools - Must be 21+ and have own tools. Prior Experience is a PLUS. Licensing - CDL required or willingness to obtain. Screening - Must pass background check and drug screening. · Ability to lift heavy equipment and work in various weather conditions. Benefits: ✔ Competitive Wages ✔ Health & Life Insurance ✔ 401(k) Retirement Plan ✔ Paid Time Off Apply Today to Join Our Team! Together, we drive progress and reliability. It is the policy of Scott Petroleum not to discriminate against any applicant for employment, or any employee because of age, color, sex, disability, national origin, race, religion, or veteran status.

As a Modeling Engineer, you will develop and refine advanced finite element models to support structural, thermal, and materials-focused analyses. You will run complex simulations, interpret results, and turn those insights into practical design guidance. You will collaborate with teams and material scientists to align modeling approaches with real-world testing, improve predictive accuracy, and influence product development. You will also apply optimization methods, support validation efforts, and give your findings through reports and presentations. PPG offers excellent Medical, Dental, & Vision Benefits; matching 401k + retirement savings; and Paid Vacation, Holiday pay. Key Responsibilities Lead the development, validation, and enhancement of high-fidelity finite element models for mechanics analysis and potentially heat conduction analysis. Produce advanced model that capture multi-physics coupling, material nonlinearity, and complex boundary interactions. Develop and guide linear/nonlinear structural, thermal, impact, and fatigue analyses using commercial FEA tools (e.g., ABAQUS, ANSYS, LS-DYNA, COMSOL). Interpret simulation outcomes with scientific rigor to uncover fundamental failure mechanisms, improve design decisions, and establish predictive design guidelines. Develop and calibrate constitutive models for metals, polymers, composites, or coatings based on experimental data. Implement custom material subroutines (e.g., UMAT/VUMAT). Lead research efforts in model accuracy improvement, numerical stability, and computational efficiency. Explore latest numerical methods (e.g., cohesive zone modeling, phase-field fracture, multi-scale modeling) to expand simulation capabilities. Data-Driven & Hybrid Modeling: Integrate data analytics, machine learning, and statistical inference techniques with traditional FEA to build hybrid physics-ML models. Develop surrogate models, reduced-order representations, or Gaussian Process regressors to accelerate simulation cycles and support uncertainty quantification. Use experimental databases and simulation data to extract governing relationships, automate parameter calibration, and ensure predictive digital twins. Collaborate with material scientists to design validation experiments, compare simulation predictions to physical test results, and refine models for improved accuracy and predictive power. Work with design, manufacturing, and product development teams to translate engineering insights into applicable design or process changes. Prepare technical documentation, analysis reports, and presentations summarizing modeling work. Qualifications A Ph.D. in mechanical engineering, aerospace engineering, or related technical subject, with CAD and FEA course studies, hands-on experience with Abaqus and Ansys tools with 1+ year related experience. OR An MS degree in mechanical engineering, aerospace engineering, or related technical subject, with CAD and FEA course studies, hands-on experience with Abaqus and Ansys tools with 5+ years related experience. Record of accomplishments as FEA guide: publications and conference presentations. Hands-on laboratory experience on mechanical experimental techniques. Proficiency in using commercial CAD tools. Must be a U.S. Person as defined by U.S. export control regulations (i.e., U.S. citizen or lawful permanent resident) to comply with government project #LI-onsite About us: Here at PPG we make it happen, and we seek candidates of the highest integrity and professionalism who share our values, with the commitment and drive to strive today to do better than yesterday - everyday. PPG: WE PROTECT AND BEAUTIFY THE WORLD™ Through leadership in innovation, sustainability and color, PPG helps customers in industrial, transportation, consumer products, and construction markets and aftermarkets to enhance more surfaces in more ways than does any other company. To learn more, visit *********** and follow @ PPG on Twitter. The PPG Way Every single day at PPG: We partner with customers to create mutual value. We are "One PPG" to the world. We trust our people every day, in every way. We make it happen. We run it like we own it. We do better today than yesterday - everyday. PPG provides equal opportunity to all candidates and employees. We offer an opportunity to grow and develop your career in an environment that provides a fulfilling workplace for employees, creates an environment for continuous learning, and embraces the ideas and diversity of others. All qualified applicants will receive consideration for employment without regard to sex, pregnancy, race, color, creed, religion, national origin, age, disability status, marital status, veteran status, sexual orientation, gender identity or expression. If you need assistance to complete your application due to a disability, please email ******************. PPG values your feedback on our recruiting process. We encourage you to visit Glassdoor.com and provide feedback on the process, so that we can do better today than yesterday. Benefits will be discussed with you by your recruiter during the hiring process. PPG pay ranges and benefits can vary by location which allows us to compensate employees competitively in different geographic markets. PPG considers several factors in making compensation decisions including, but not limited to, skill sets, experience and training, qualifications and education, licensure and certifications, and other organizational needs. Other incentives may apply. Our employee benefits programs are designed to support the health and well-being of our employees. Any insurance coverages and benefits will be in accordance with the terms and conditions of the applicable plans and associated governing plan documents.

Mechanic Alter Trading Corporation, a 123+ year old privately held company with over 70 scrap metal processing facilities and affiliates throughout nine states in the Midwest and Southern region is searching for an energetic, detail-oriented Maintenance Mechanic. Alter is committed to our customers by being the best source of both ferrous and non-ferrous metal and by giving great customer service. Our corporate support center and marketing is located in St. Louis, MO, with Trading Offices located in St. Louis and in Hong Kong. Our website is ******************** Job Description/Responsibilities Troubleshoot, maintain, repair and conduct preventive maintenance on all facility equipment. 1. Inspect and conduct preventive maintenance on all equipment 2. May maintain facility equipment, on or off site including but not limited to: · Cranes · Forklifts · Loaders · Non-ferrous Shear · Skid Steer · Sorting Lines · Shredders · Trucks · Trailers · Wire Striper 3. Prepare & maintain all maintenance records 4. Organize and maintain cleanliness of Maintenance Department 5. You will be involved in variety of other responsibilities including ordering parts, welding, and fabricating, minor electrical repairs Qualifications 1. High school diploma or GED required. Prefer AAS (technical degree) and/or technical certification in Truck Repair, Welding, Hydraulics, and Electrical & Diesel Mechanics. 2. Minimum 2-4 years' experience in truck repairs, diesel mechanics, hydraulics, welding, electrical record keeping, and preventive maintenance programs. Must be able to multi-task & have the ability to develop effective working relationships with vendors & suppliers. Must be able to analyze facts and determine action using a range of procedures within limits of standard practice. Good communication skills and some computer skills required to utilize online PM programs as well as computer diesel, hydraulic and or electrical program Job Type: Full-time Expected hours: 40 - 50 per week Schedule: 8-10 hour shift Day shift Monday to Friday No nights Work Location: In person

Since its foundation in 1986, Thompson Construction Group, Inc. has grown from a small, local company into one of the largest privately held companies based in South Carolina. Our diverse services portfolio includes capital projects, power services, maintenance services, disaster recovery, hydro consulting and commercial construction. We believe in investing in our employees to help them reach their professional goals, as well as their personal goals. Thompson promotes a work environment that fosters learning, leadership, and development along with a safety culture that never waivers. Thompson is headquartered in Sumter, South Carolina with offices spanning the United States, primarily southeast and central United States. Position Description We are seeking an experienced Boilermaker with a strong background in the fabrication, assembly, maintenance, and repair of steam-generating boilers and associated boiler tube systems. The ideal candidate will have hands-on expertise working with high-pressure boilers, tube rolling, welding, and boiler inspections, ensuring safe and efficient plant operations. Job Responsibilities * Assemble, install, maintain, and repair steam-generating boilers, pressure vessels, tanks, and related equipment. * Ability to read and interpret blueprints, engineering drawings, and technical manuals. * Capable of laying out, positioning, aligning, and securing components prior to assembly. * Cut, shape and fit metal components to construct and repair boiler tubes, drums, and headers. * Perform tube removal and tube replacement in boilers. * Use torches, welding equipment, and cutting tools for fabrication and repair tasks. * Maintain accurate records of inspections, repairs, and work performed. * Inspect boiler systems for cracks, leaks, corrosion, and other defects to ensure compliance with safety and quality standards. * Conduct hydrostatic and pressure testing on repaired and newly installed systems. * Preheat if necessary, using hand torch or heating furnace. * Ability to work in flat, horizontal, vertical, or overhead positions. * Comfortable working in confined spaces as well as at heights using a sky climber. * Adhere to all OSHA, ASME, and company safety standards while working in confined spaces and at heights. * Collaborate with engineers, supervisors, and other skilled trades to complete projects efficiently. * Respiratory protection is common and may be required. * Physically able to meet job demands. * Responsible for observing and complying with all safety and project rules. * Other duties as assigned. Job Qualifications * Minimum 5 years of experience working with steam-generating boilers, boiler tubes, and pressure vessels. * Strong knowledge of boiler tube installation, rolling, expanding, and welding techniques. * Familiarity with ASME codes, standards, and power plant safety procedures. * Ability to read and interpret blueprints, schematics, and technical manuals. * Skilled in using grinders, torches, hydraulic tube expanders, and pneumatic tools. * Comfortable working in confined spaces, at heights, and in hot environments. * Strong troubleshooting, problem-solving, and mechanical aptitude. * Physical stamina and strength to lift heavy materials and work long shifts if required. * Must be willing to work outside craft. * Workers are surrounded by hot materials and strong light. * Must wear safety gear, including protective goggles, masks, face shields and safety shoes. * Must be able to read, write and communicate clearly with supervisor/co-workers and understand direction from supervisor. * Utilize basic math and a calculator to solve geometric problems associated with Instrument Fitting. * May be required to work outside and be subject to severe weather as well. * Employee must be able to climb, bend, twist, stand and reach repetitively, operate moving equipment and work in hot/cold/damp/cramped environments. * Candidate may be required to pass a drug test and criminal background check based on job location/requirements. * Must be at least 18 years of age * Must be able to lift 50 pounds, climb, bend, twist, stand and reach repetitively. * Work in hot/cold/damp/cramped environments * 40 or more hours per week with possible weekend work * Background check and drug screen based on job location/requirements Benefits * We strive to provide a competitive compensation and benefits package. This includes but is not limited to medical, dental, vision, life insurance, 401(k), wellness programs and career development. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Accessibility: If you need an accommodation as part of the employment process please contact Human Resources at Phone: ************** Email: *********************************** Equal Opportunity Employer, including disabled and veterans. If you want to view the Know Your Rights: Workplace Discrimination is Illegal poster, please choose your language: English - Spanish - Arabic - Chinese English - Spanish - Chinese If you want to view the Pay Transparency Policy Statement, please click the link: English To see other positions, click here.

ESSENTIAL FUNCTIONS: The essential functions include, but are not limited to, the following duties. Additional essential functions may be identified by the organization and listed as such in the incumbent's performance appraisal element. Various tasks may be assigned under each essential function. Those that are listed under the examples of work are not all inclusive; they are examples only and may be amended or added to as needed by the organization. Inspecting and repairing ground support equipment Installing and removing Quick Engine Change (QEC) kits on aircraft engines Dealing with Coworkers/Clients/public JOB DUTIES: Responsibilities may include, but are not limited to: Performing engine QEC buildup actions, both assembly and tear down. Uses automated maintenance data systems to maintain equipment records, and document maintenance actions, maintains external fuel and grounding systems Inspects, tests, and operates GSE to determine equipment serviceability and proper operation Services equipment with fuel, oil, water, coolant, hydraulic fluid, refrigerant, and compressed air, disassembles and assembles malfunctioning GSE accessories and components Removes, disassembles repairs, cleans, treats for corrosion, assembles, and reinstalls GSE components and accessories Stencils and marks GSE in accordance with technical publications, stores, handles, labels, uses Disposes of hazardous materials and waste in accordance with all state, local, and federal environmental standards and regulations Operates, cleans, inspects, and services GSE towing vehicles; provides dispatch service for GSE, including positioning equipment to support aircraft maintenance and flying operations. Practices good housekeeping, tool control, Foreign Object Damage prevention and safety at all times. Additional responsibilities include working with a variety of repair and test equipment including welders, torches, pressure testers and electrical testers to name a few. Completing all required documentation and tagging requirements of QEC items. Order QEC parts from COMBS. Refer to technical publications to determine specifications to be met. Track and record calibration dates to insure that support equipment is up to date. Keep files with documentation and certifications of calibrated equipment. Ensure that equipment is sent out for calibration when due. Ensure that all equipment is accounted for. Assign I.D. numbers to each piece of equipment. When turning over equipment to the operating command make certain to have them sign a receipt for all equipment to keep on file in COMBS. Each LD. number must have a file of record. Performs maintenance and inspections on (GSE) according to applicable maintenance manuals, manufacturer specifications and FAA regulations. Research and order materials for repair of support equipment. Performs engine QEC build-up actions, i.e. assembly and teardown. Cleaning of warehouse, shops, offices and restrooms as required. Clerical and other assigned duties as required. Prepares GSE for storage and transportation Other Duties as assigned Abide by all Company policies and procedures not otherwise noted above. QUALIFICATIONS: Knowledge, Skills, and Abilities (Required Skills include the ability to:) Understanding of scheduling techniques and technical order requirements. Ability to accurately troubleshoot and repair complex aircraft engine/support equipment systems. Mental and visual ability to read and understand detailed technical publications and instructions. Ability to communicate effectively, both orally and in writing. Ability to deal courteously with the customer. Knowledge of generally accepted accounting principles sufficient to perform the job, duties, and tasks associated with the position. Knowledge of contractual requirements. Extensive working knowledge in logistics and data information systems. Education and Experience: Graduation from a standard four (4) year high school or equivalent (GED). Thirty-six (36) months in one or more of the maintenance trades or the Minimum three (3) years recent aircraft maintenance experience Valid FAA Airframe and Power plant Certificate Benefits include the following: Healthcare coverage Retirement Plan Life insurance, AD&D, and disability benefits Wellness programs Paid time off, including holidays Learning and Development resources Employee assistance resources Pay and benefits are subject to change at any time and may be modified at the discretion of the company, consistent with the terms of any applicable compensation or benefit plans.

The incumbent is responsible to service, troubleshoot, repair and inspect aircraft to ensure airworthiness. Overseas and directs the activities of the Aircraft Mechanics. Major Job Activities Description * Inspects and certifies aircraft at specific intervals as required by OEM and FAA * Troubleshoots system malfunctions, performs necessary corrective actions * Document's maintenance of aircraft on appropriate forms * Removes and replaces defective components * Complies with Service Bulletins, Instructions and Airworthiness Directives as directed * Performs and documents all Ground Support Equipment maintenance * Performs preflight/post flight turn around inspections and servicing when required * Maintains aircraft logbooks and historical data as required * Maintains all Hazard Material lockers for cleanness, up to date inventory and out-of-date items * Maintains site tool calibration program * Complies with safety, foreign object damage and tool control program requirements * Washes, waxes, cleans and maintains exterior and interior of aircraft * Serves as a point of contact with the Quality Assurance Representative * Advises management of problems that may delay scheduled delivery of aircraft to customer * Ensures materials issued for assigned tasks are the correct items with proper documentation to repair the problem * Provides on-the-job training to new employees as required * Supervises and inspects maintenance performed by FAA certified and non-certified personnel * Services oxygen, nitrogen, tires, oil and hydraulic systems * Inspects for and treats corrosion on aircraft and Ground Support Equipment as required * Assists with monitoring maintenance of aircraft fleet * Provides technical support to the customer concerning the fleet * Assigns mechanics to specific aircraft on a daily basis * Communicates with customers regarding aircraft status * Provides guidance to subordinate employees and peers when appropriate, collaborating and cooperating with other members of the management team * Implements the performance appraisal system for employees under incumbent's supervision * Approves or disapproves subordinate employees' performance and recommends action of corrective procedures * Implements in-service training programs to communicate current information and procedures to employees under incumbent's supervision and evaluates training programs to determine their effectiveness in improving staff performance * Recommends and maintains uniform procedures and standards of operation for the Department * Evaluates the efficiency of operations within the Department and recommends appropriate changes * Assists with recruitment, selection, discipline, and training of personnel * Greetings to all visitors and clients * Exhibits positive courteous behavior with customers, businesses and coworkers * Assists coworkers and those in other departments to successfully perform job tasks and functions when necessary * Follows all safety procedures and practices established by the Company and regulatory bodies * This job does have supervisory responsibilities Material & Equipment Directly Used * Aviation maintenance hand and power tools * Aviation test sets * Ground Support Equipment (GSE) * Engine Oil, Hydraulic Fluid, Cleaning Compounds, Oxygen, Nitrogen, Compressed Air, Aircraft Fuels, Primers and Paints Working Environment The work environmental characteristics described here are representative of those an employee encounters while performing the essential functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this position, the employee is frequently exposed to moving mechanical parts, fumes or airborne particles, and risk of electrical shock. The employee is occasionally exposed to high, precarious places; toxic or caustic chemicals; outside weather conditions; risk of radiation; and vibration. The noise level in the work environment is usually moderate Physical Activities The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this position, the employee is regularly required to use hands or finger to handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl; and talk or hear. The employee frequently is required to sit. The employee is occasionally required to stand, walk, and taste or smell. The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception, and ability to adjust focus. Qualifications Education / Certifications: * Graduation from a standard four (4) year high school or equivalent (GED). * FAA Airframe & Powerplant (A&P) License * Valid State Driver License * Valid Passport * Obtain and maintain a secret security clearance * Sufficient aviation maintenance hand tools to perform routine Airframe and Powerplant duties Experience: Shall have at least (5) five years' aircraft maintenance experience with at least (3) three years maintaining King Air/1900 Airliner series aircraft to include complex aircraft modifications. Shall have at least (1) one year's experience as a site lead under a similar type of aircraft. Skills & Technology Used: * Understanding and using the English language both oral and written to communicate information or ideas to another person or persons * Writing routine reports and correspondence * Reading and interpreting documents such as safety rules, operating and maintenance instructions and procedure manuals * Adding, subtracting, multiplying and divide in all units of measure, using whole numbers, common fractions and decimals * Interpreting a variety of instructions furnished in written, oral, diagram or schedule form * Planning and organizing * Creating, entering, retrieving and printing from current software packages such as Excel and Word * Demonstrating problem analysis and independent decision making * Demonstrating leadership; delegation of tasks and duties; motivating subordinates; discerning priorities * Demonstrating intra and interpersonal relations * Recognizing or identifying the existence of a problem as well as elements of a problem * Performing a task in the presence of distracting stimulation or under monotonous conditions without significant loss of thought process and efficiency * Perceiving and feeling such attributes of objects and materials as size, shape, temperature or texture * Operating hand and power tools * Traveling worldwide with limited notice * Interpreting drawings, specifications and schematics of aircraft instrument/electronic components * Recognizing from schematics and drawing not only how one assembly functions but also how various assemblies interact with each other * Databases sufficient to perform the job, duties, and tasks associated with the position * Aircraft sheet metal repair and component repair * Instrument, electronic and electrical test equipment * Military or commercial aviation maintenance and its terminology * U.S. government regulations for federal contractors and FAA maintenance programs Supervisory / Budgetary Responsibilities This is a supervisory position

**_Job Responsibilities:_** Work from Government instructions and Maintenance Instruction Manuals and Company directives to perform maintenance repair and installation of aircraft life support systems and aircrew personal survival equipment. Transport, install and remove Cartridge Actuated Devices and Propulsion Actuated Devices. Pack, unpack, preserve and maintain parachutes and seat survival kits. Repair, fit, maintain and preserve pilots personal equipment Perform corrosion control and prevention as required. Issues and receives aircrew survival equipment. Initiate and update checkout/return records. Assemble, place in service, and perform calendar inspections on oxygen mask assemblies, survival vest, helmets, and other related safety/survival equipment. Perform aircraft conditional and special inspections of installed safety/survival equipment. Maintain OOMA for parachute and personal equipment for accountability and inspection due dates. Adjust, maintain, and perform minor repairs on sewing machines. Construct fabric items using a sewing machine and performs hand tacking on fabrics. Remove, install, and repair slide fasteners, grommets, snap fasteners, and Velcro closures on personal survival equipment and other types of fabrics. Orders required survival equipment and supplies. Install and test emergency radios in survival vest. May be required to perform collateral duty inspection or CDQAR functions. Identifies and treats corrosion. Completes applicable maintenance forms. Briefs and debriefs flight personnel on the use and condition of survival equipment. Maintains cleanliness of work center. Complies with Foreign Object Damage (FOD), Hazardous Waste, and Tool Control Programs. Assist as directed to ensure safety, security, and preservation of Government/Company Owned equipment. Performs other related duties as required. Deals with the customer in a courteous, professional, and effective manner. May be required to perform off-site service on assigned detachments. **Basic Qualifications:** Completion of U.S. Navy Aircrew Survival Equipment man "A" school or another military, civilian, or manufacturer schools with equivalent curriculum required. Must possess a mechanical aptitude. Must be able to meet any Government/Company licensing/qualification requirements for the position. Must be able to obtain the level of security clearance required by the Government. Must have two (2) years experience in aviators personal survival equipment and aircraft installed safety/survival equipment maintenance. **Licensing, Certification Requirements:** + Formal/Specialized Training or Equivalent + Hazardous Waste Communication Training + FOD and TCP Awareness Trained + Security Clearance Awareness Training + OPVAV INST 4790.2 Program Awareness + ISO 9001-2000 Program Awareness + NALCOMIS/OOMA System Trained + Valid State Drivers License + ESD Trained + Support Equipment Operator's License + Collateral Duty Inspector (may be required) # + Egress System Checkout + Non-Nuclear Ordnance Handling + Plane Captain (may be required) # + Aircraft Towing Certified (may be required) + Aircraft Brake Rider Certified (may be required) + Operational Risk Management (ORM) Training + Fuel Surveillance Trained (may be required) # Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights (**************************** notice from the Department of Labor.

Job Type: Contractor Per diem: we offer split pay per diem with weekly pay Hours: overtime is available License: Airframe & Power Plant License - Required Experience Requirements Minimum 2+ years of experience in MRO environments (e.g., AAR Corp., Aviation Technical Services (ATS), Delta TechOps, Lufthansa Technik, StandardAero, ST Engineering) Wide body Aircraft Experience Required (Example: B777, B787, B757, B767, MD11 , B737-800) Be able to read, write, speak, and understand the English language. Technical Skills Structural Inspection: Perform thorough inspections of aircraft structures according to maintenance manuals and regulatory standards. Repair and Modification: Execute repairs and modifications on aircraft structural components using approved techniques and materials. Assembly and Installation: Assemble and install structural components and systems on aircraft, ensuring precision and adherence to engineering drawings. Documentation: Maintain accurate records of inspections, repairs, and modifications performed, complying with regulatory requirements. Safety and Compliance: Adhere strictly to safety protocols and regulatory guidelines during all tasks and operations. Team Collaboration: Work collaboratively with engineers, technicians, and other personnel to ensure efficient workflow and high-quality aircraft maintenance. Completes any or all structural rework/repair, squawks, and E.O.'s. Perform work of the level described herein, interpret complex blueprints and use arithmetic involving decimals and fractions Fabricate detail parts from blueprint or engineering instructions Physical Requirements Able to lift up to 50 lbs Comfortable in physically demanding environments Tools Must supply personal tools

At Midas we are dedicated to providing quality services to customer vehicles in the areas of inspection, diagnosis and repair utilizing the expertise attained through ASE Certifications and/or years of automotive repair experience. We are looking for automotive technicians/mechanics that are able to work independently of others, while also being able to work collaboratively at times with peers. We have a full-service facility and we are looking for automotive technicians to help us create an environment of success! ResponsibilitiesAs a Midas automotive technician, you'll be exposed to and have responsibility for performing a wide range of diagnostics, repairs and maintenance, including: Diagnostics using state-of-the-art computer systems Tires and tire repair Car heating and air conditioning Steering and suspension Belts and hoses Radiator and engine cooling systems Batteries, starting and charging Steering and suspension Brakes and brake repair Oil changes Check engine light Mufflers and exhaust services Visual safety and courtesy inspections Qualifications Ability to repair vehicles independently, while also having experience working well in a team environment Knowledge in automotive brakes, exhaust, suspension, & engine diagnostics Track record of high personal productivity Knowledge of, and adherence to, safety and environmental standards for repair facilities Experience using shop equipment such as lifts, tire changing equipment, alignment machines and scan tools High School Diploma or equivalent - technical degree a definite plus State-specific auto repair certifications Valid driver's license Own tools/equipment (diagnostic scanner / tools preferred also) Able to service both foreign and domestic vehicles Compensation: $15.00 - $24.00 per hour Join Our Team As one of the largest destinations for automotive services, Midas is dominating the industry in developing career paths and building relationships within the communities they serve. At Midas, we take care of everything… tires, brakes, oil… so the opportunities to grow and develop expertise with Midas are endless. *************

City of Horn Lake - Public Works - Mechanic Under direction, repairs, services, and performs major and minor repairs to City automobiles, trucks, emergency equipment, tractors, and other equipment. Major Duties and Responsibilities The following duties are typical for this classification. Incumbents may not perform all of the listed duties and/or may be required to perform additional or different duties from those set forth below to address business needs and changing business practices. * Inspect automobiles, trucks, and related equipment to locate and determine the extent of necessary overhaul or repair. * Perform general overhaul and repair work on gasoline, diesel and propane powered engines such as automobiles, trucks, tractors, police and fire vehicles and equipment, and other automotive and mechanical equipment at off-site locations and at the city shop/garage. * Inspect, adjust, and replace necessary units and related parts including valves, hoses, belts and alternators. * Repair cooling, fuel, electrical, and exhaust systems; tune engines using standard testing equipment. * Diagnose, repair, and maintain hydraulic systems. * Perform preventive maintenance work on vehicles, including lubrication and oil changes. * Fabricate and weld to repair equipment as necessary. * Perform vehicle body work and collision repair. * Operate vehicles and equipment to aid in diagnostics; pick up and deliver vehicles and parts. * Install emergency equipment for emergency vehicles; perform repair work on other City equipment and systems as necessary. * Clean and maintain the city shop/garage area and equipment. * Inventory, order and control tools, supplies and materials for city shop/garage; research, compare, and locate parts, equipment, and vehicles. * Maintain records on all maintenance and repair work performed; track recalls, smog inspection dates, and warranties for all vehicles. * Perform other related duties as required. The following generally describes the knowledge and ability required to enter the job and/or be learned within a short period of time in order to successfully perform the assigned duties. Knowledge of: * Methods, materials, equipment, and tools used in vehicle and equipment maintenance and repair. * Various mechanical systems of gasoline and diesel engines. * Various electrical systems of gasoline and diesel engines. * Standard practices, equipment and tools of the automotive and equipment mechanical trade. * Principles and practices of gasoline and diesel engine repair and maintenance. * Methods and techniques of welding and fabrication. * Operating and repair characteristics of hydraulic systems. * Principles and practices of fire truck pump and valve repair and maintenance. * Basic principles of record keeping. * Shop mathematics. * Occupational hazards and standard safety procedures Ability to: * Perform a variety of duties in diagnosing, troubleshooting, and repairing vehicles, equipment and components. * Inspect automotive, emergency and public works equipment to locate mechanical defects, to diagnose mechanical, electrical and hydraulic problems and to determine corrective procedures. * Perform a variety of welding work. * Estimate time and materials needed for work. * Maintain a variety of shop and repair records and logs. * Use various hand and power driven shop tools. * Prepare and maintain clear and accurate reports. * Understand and follow oral and written instructions. * Communicate clearly and concisely, both orally and in writing. * Establish and maintain effective working relationships with those contacted in the course of work PHYSICAL DEMANDS AND WORKING ENVIRONMENT The conditions herein are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential job functions Work is performed primarily in a shop environment; occasional field environment with some travel from site to site; exposure to noise, dust, grease, smoke, fumes, noxious odors, gases, and all types of weather and temperature conditions; exposure to hazardous traffic conditions; work and/or walk on various types of surfaces including slippery or uneven surfaces and rough terrain; incumbents may be required to work extended hours including evenings. Physical: Primary functions require sufficient physical ability and mobility to work in a mechanic shop environment; walk, stand, and sit for prolonged periods of time; frequently stoop, bend, kneel, crouch, crawl, climb, reach, and twist; push, pull, lift, and/or carry moderate to heavy amounts of weights; operate assigned equipment and vehicles; and to verbally communicate to exchange information. Job Content The Public Works mechanic is a full-time, permanent position in the Public Works Department under supervision and specific direction from the Operations Director. The person in this position is supervised daily and works regularly scheduled hours throughout the year. This position is 95% indoors with 5% outdoors depending on the nature of the work performed. There is a high risk of exposure to chemicals and/or hazardous materials on a daily basis. The person in this position must hold a valid driver's license and a high school diploma or GED. FLSA: Non - Exempt REPORTS TO: Operations Director Public Works, Assistant Public Works Director SUPERVISES: N/A The does not constitute an employment agreement between the employer and employee and is subject to change by the employer as the needs of the employer and requirements of the job change. Characteristics described in this job description are representative of those an employee encounters while performing this job. Reasonable accommodations may be made to enable individuals with disabilities to perform them.

HVAC Mechanic Full-time: Monday-Friday Pay Rate: $28 Location: U.S Court House Oxford MS EEO Statement: SDAC is an Equal Opportunity Employer: Qualified applicants will receive consideration without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Mission Our commitment to integrity and our consistent ability to exceed customer expectations raise us head-and-shoulders above the rest. Our experienced team has a deep understanding of the many demands and restrictions placed on contracting personnel. We remain committed to complete compliance with all policies and procedures essential to the success of each project-large, small and everything in between. Job description: The HVAC Mechanic will be responsible to provide HVAC preventative maintenance, diagnosis and repairs for established site at Government military facility as well as on demand service using accepted industry standard methods and following the manufacturers' and/or Federal Government guidelines on facility HVAC equipment. The Mechanic will respond to client requests assigned in a safe, efficient, clean and professional manner. Responsibilities: Responsible for performing work safely and reporting to the Project Manager any observed safety and security problems Maintain accurate lists, security and stocking levels of HVAC service tools and consumable supplies Installation of HVAC equipment and systems Perform preventative maintenance to commercial HVAC equipment including but not limited to chillers, heat pumps, split systems, roof top units, air handling units, pumps, cooling towers, VAV systems, etc. Any reasonable assignment or request related to the building operation as directed by the Client, any company executive, the Project Manager Be available to respond to emergency calls and administer an after-hours emergency response call list Job Requirements: Minimum of five (5) years' experience working on HVAC systems and associated equipment NATE certification (required) Universal CFC Certification (required) High school diploma or equivalent HVAC License (preferred) HVAC Excellence or UA Star Certification (preferred) Communicate effectively in English in speaking and writing Advanced HVAC training and manufacturer training Extensive technical knowledge of heating, ventilation, and air conditioning maintenance and repairs Ability to diagnose refrigeration systems, air distribution systems and equipment controls Able to work Monday-Friday with occasional overtime during afternoons, evenings and weekends as needed for emergencies Must be able to respond to after-hours emergency calls Good physical condition with ability to lift 75 lbs. and possessing good fine motor coordination and ability to withstand exposure to dust, fumes, heights, and confined spaces U.S. Citizen or approved registered alien Ability to pass drug screening and Federal Government criminal background check Physical Requirements (with or without reasonable accommodation): The HVAC Technician is subject to hazards. Includes a variety of physical conditions, such as hot and/or cold weather conditions, proximity to moving mechanical parts, moving vehicles, electrical current, working on scaffolding and high places, exposure to high heat or exposure to chemicals. Also, bending, stooping and occasional light lifting to accomplish tasks. Walking particularly for long distances or moving from one work site to another.

Job Title Aircraft Mechanic Working Title Aircraft Mechanic Position Type Staff Department Commercial Aviation Posting Number 201201665 Full or Part Time Full Time Benefit Eligible Yes If Other, Please Explain: Tenure/Non-Tenure Track Salary Basis 12 month If Other, Please Explain: Position Summary Information Responsibilities Performance of maintenance and inspections on University fleet. Qualifications FAA A&P Certificate Salary Commensurate with experience, qualifications, and university's resources. Minimum Qualifications Preferred Qualifications FAA A&P Certificate with Inspection Authorization Special Instructions to Applicants Upload a copy of FAA A&P certificate under the "Other Document" section. Additional Information Posting Detail Information Open Date 11/19/2025 Close Date Open Until Filled Yes

Benefits: * Fuel Your Growth with Love's - company funded tuition assistance program * Paid Time Off * Flexible Scheduling * 401(k) - 100% match up to 5% * Medical/Dental/Vision Insurance after 30 days * Competitive Pay * Career Development * Hiring Immediately Welcome to Love's! Diesel Technicians work in a fast-paced environment and maintain clean places with friendly faces. You will interact with customers & drivers from all over, making their travels and their day better. Job Functions: * Troubleshoot and repair light mechanical issues that may include wheel-end assemblies, electrical systems, suspensions, A/C, or engine components * Assist customers with roadside services * Provide preventative maintenance services * Ability to move, lift 75+ pounds working in close quarters. Ability to work in various temperatures. * Always put the safety and satisfaction of your customers first, complying with company safety policies & procedures. * Work a rotating schedule that alternates between day and night as needed. * Ability to obtain a medical card through the Department of Transportation. (paid by Love's) Our Culture: Come see why Love's Travel Stops and Country Stores was recognized by Indeed as the winner of the Better Work Award in 2023. Love's Travel Stops and Country Stores is an Equal Opportunity Employer. Veterans encouraged to apply. Love's has been fueling customers' journeys since 1964. Innovation and perseverance continue to lead the way for the family-owned and -operated business headquartered in Oklahoma City with more than 40,000 team members in North America and Europe. The company's core business is travel stops and convenience stores with more than 630 locations in 42 states. Love's continues its commitment to offer products and services that provide value for professional drivers, fleets, four-wheel customers, RVers, alternative fuel and wholesale fuel customers. Giving back to communities Love's serves and maintaining an inclusive and diverse workplace are hallmarks of the company's award-winning culture. The Love's Family of Companies includes: * Gemini Motor Transport, one of the industry's safest trucking fleets. * Speedco and Love's Truck Care, the largest oil change and preventive maintenance and total truck care network. * Musket, a rapidly growing, Houston-based commodities supplier and trader. * Trillium, a Houston-based alternative fuels expert. * TVC Pro-driver, a commercial driver's license (CDL) protection subscription service.

Who we are: Would you like to work for a stable, secure, and fast-growing airline where you will be stimulated, challenged, and have the opportunity to develop your career? If so, read on! Come and work with the best of the best at Envoy Air where you will join a team committed to providing outstanding service. We offer: Amazing employee flight privileges within the American Airlines global network Training and development programs to take your career to the next level Comprehensive health and life benefits (subject to location) Responsibilities Responsibilities Ensure our fleet meets aircraft standards as required by the Federal Aviation Administration (FAA) Maintain the airworthiness of aircraft and all their components while in service or while undergoing scheduled overhaul maintenance Completed tasks according to FAA regulations, company policies and procedures, and instructions from Crew Chiefs, Supervisors and Managers Certify the quality of personal workmanship, including signing mechanical flight releases for field work Complete necessary paperwork and computer entries for any maintenance performed A wide variety of duties are performed such as dismantling, overhauling, repairing, fabricating, assembling, welding and erecting all parts of an aircraft; which includes airframe, engines, radio equipment, instruments, electrical systems, heating systems, cooling systems, and hydraulic systems Test and inspect parts, subassemblies or completed assemblies Assure the shop/work area is maintained in a safe and orderly manner. If qualified, may be responsible for taxiing and towing aircraft for maintenance purposes Qualifications Position Requirements Minimum Age: 18 High school diploma or GED equivalent Valid Airframe & Powerplant (A&P) license Valid state driver's license; some license restrictions may prohibit a candidate from being considered for this position Ability to differentiate colors such as: red, green, yellow, blue, black, brown, white and orange Ability to lift items weighing up to 60 lbs. Willing and able to work rotating shifts including, nights, holidays, weekends and days off Demonstrated ability to communicate effectively both orally and in writing Possess the legal right to work in the United States Must be able to read, write, fluently speak and understand the English language Position Preferences A minimum of one (1) year of aircraft maintenance experience FCC General Radio Telephone Operators license Additional Details Mechanics must maintain a valid passport and the ability to travel freely to and from all of the cities/countries served by our Airline in order to complete field trips This position is covered by a collective bargaining agreement (unless in Abilene, TX) Must fulfill FAA criminal background checks to qualify for unescorted access privileges to airport security identification display areas (SIDA), if applicable Must be able to secure appropriate airport authority and/or US Customs security badges, if applicable If applicable, Federal law requires Envoy to determine an applicant's history of Department of Transportation (DOT) drug and/or alcohol violation(s) or refusal(s) to test before hiring him/her into a safety-sensitive position Envoy Air Inc., a wholly owned subsidiary of American Airlines Group, provides regional flight service to American Airlines under the American Eagle brand and ground handling services for many American Airlines Group flights. The company was founded in 1998 as American Eagle Airlines, Inc., following the merger of several smaller regional carriers to create one of the largest regional airlines in the world. Envoy is headquartered in Irving, Texas, with hubs in Dallas/Fort Worth, Chicago and Miami, with a large ground handling operation in Los Angeles. Connect with Envoy on Twitter @EnvoyAirCareers, on Instagram @EnvoyAirCareers, and on Facebook at Facebook.com/envoyaircareers and Facebook.com/EnvoyPilotRecruitment. We can recommend jobs specifically for you! Click here to get started.

Job Responsibilities: Work from Government instructions and Maintenance Instruction Manuals and Company directives to perform maintenance repair and installation of aircraft life support systems and aircrew personal survival equipment. Transport, install and remove Cartridge Actuated Devices and Propulsion Actuated Devices. Pack, unpack, preserve and maintain parachutes and seat survival kits. Repair, fit, maintain and preserve pilots personal equipment Perform corrosion control and prevention as required. Issues and receives aircrew survival equipment. Initiate and update checkout/return records. Assemble, place in service, and perform calendar inspections on oxygen mask assemblies, survival vest, helmets, and other related safety/survival equipment. Perform aircraft conditional and special inspections of installed safety/survival equipment. Maintain OOMA for parachute and personal equipment for accountability and inspection due dates. Adjust, maintain, and perform minor repairs on sewing machines. Construct fabric items using a sewing machine and performs hand tacking on fabrics. Remove, install, and repair slide fasteners, grommets, snap fasteners, and Velcro closures on personal survival equipment and other types of fabrics. Orders required survival equipment and supplies. Install and test emergency radios in survival vest. May be required to perform collateral duty inspection or CDQAR functions. Identifies and treats corrosion. Completes applicable maintenance forms. Briefs and debriefs flight personnel on the use and condition of survival equipment. Maintains cleanliness of work center. Complies with Foreign Object Damage (FOD), Hazardous Waste, and Tool Control Programs. Assist as directed to ensure safety, security, and preservation of Government/Company Owned equipment. Performs other related duties as required. Deals with the customer in a courteous, professional, and effective manner. May be required to perform off-site service on assigned detachments. Basic Qualifications: Completion of U.S. Navy Aircrew Survival Equipment man “A” school or another military, civilian, or manufacturer schools with equivalent curriculum required. Must possess a mechanical aptitude. Must be able to meet any Government/Company licensing/qualification requirements for the position. Must be able to obtain the level of security clearance required by the Government. Must have two (2) years experience in aviators personal survival equipment and aircraft installed safety/survival equipment maintenance. Licensing, Certification Requirements: Formal/Specialized Training or Equivalent Hazardous Waste Communication Training FOD and TCP Awareness Trained Security Clearance Awareness Training OPVAV INST 4790.2 Program Awareness ISO 9001-2000 Program Awareness NALCOMIS/OOMA System Trained Valid State Drivers License ESD Trained Support Equipment Operator's License Collateral Duty Inspector (may be required) # Egress System Checkout Non-Nuclear Ordnance Handling Plane Captain (may be required) # Aircraft Towing Certified (may be required) Aircraft Brake Rider Certified (may be required) Operational Risk Management (ORM) Training Fuel Surveillance Trained (may be required) #