Mechanical engineering internship jobs in Oregon

The Sr. Mechanical Engineer applies engineering techniques to design, install, modify, analyze, repair and test tools, engines, machines and other mechanically functioning equipment. Leads and supports the mechanical design, testing, and production of electrical machines as well as the design of electronics packaging for high altitude aerospace applications. Leads or supports mechanical packaging development effort for electronic equipment that withstand stringent environmental requirements (i.e., mass, volume, thermal, vibration). Manages mid-size development projects outsourced to sub-contractors (development of a system, equipment or components). Location: Hood River, OR Position Responsibilities + Leads or supports the thermal, structural, dynamic, and fluid flow analysis efforts for electronics equipment + Leads the testing and data collection in the laboratory and the field + Models the mechanical devices and selects the proper material + Performs stress and fatigue analysis; Performs thermal analysis and selects bonding material + Develops mechanical drawings and specifies the dimensional tolerances + Develops assembly instructions and test procedures + Develops test plans and test procedures to verify designs + Works on complex issues where analysis of situations or data requires an in-depth knowledge of variable factors + Executes team assignments effectively following the given schedule, milestone, and available resources. May coordinate activities of other personnel (Team Lead). + Other duties as assigned Basic Qualifications (Required Skills & Experience) + Minimum 8 - 12 years of relevant technical experience in Mechanical Engineering, of which a minimum of 5 years in developing for production rotating electrical machines, electronics equipment packaging solution, and/or mechanical devices solutions for industrial and aerospace applications + Experienced in developing requirements specification for mechanical subsystems and according to MIL-STD 961D standard or equivalent + Has sufficient proficiency with the following CAD /CAE tools to perform one's position responsibilities: + SolidWorks for mechanical modeling. + ANSYS for structural and fatigue analysis + ANSYS Icepack for thermal analysis. + Extensive experience with Solid Works and designing electrical rotating machines for high- performance applications + Extensive experience with thermal management tradeoffs and solutions and materials properties + Experienced with bonding techniques for extreme environmental conditions using different adhesives + Experienced with manufacturing methodologies of electrical machines + Experienced with creating and maintaining product document tree + Experienced with creating and maintaining products bill of materials (BOM) + Experienced with test and measurement techniques, such as torque transducer calibration and instrumentation Other Qualifications & Desired Competencies + MS degree in Mechanical Engineering is preferred + Recognition by a reputable international engineering society such as ASME at the senior membership level or higher is desired + Demonstrates familiarity with MIL-STD-810 or DO-160 + Demonstrates familiarity with MIL-STD 961D standards (or equivalent) for developing subsystem technical specifications + Demonstrates full understanding & knowledge of engineering principles in the technical discipline and successfully works independently + Effectively articulates concepts and ideas to both technical and non-technical staff + Able to excel in a fast-paced, deadline-driven environment, where small teams share a broad variety of duties + Displays strong initiative and drive to accomplish goals and meet company objectives + Takes ownership and responsibility for current and past work products + Is committed to learning from mistakes and driven to improve and enhance performance of oneself, others, and the company + Has effective problem-solving, analytical, interpersonal and communication skills (Verbal and written) + Focuses on teamwork, collaboration and puts the success of the team above one's own interests Physical Demands + Ability to work in an office and production environment (Constant) + Required to sit and stand for long periods; talk, hear, and use hands and fingers to operate a computer and telephone keyboard (Frequent) The salary range for this role is: $107,370 - $152,250 AeroVironment considers several factors when extending an offer, including but not limited to, the location, the role and associated responsibilities, a candidate's work experience, education/training, and key skills. **ITAR Requirement:** _T_ _his position requires access to information that is subject to compliance with the International Traffic Arms Regulations ("ITAR") and/or the Export Administration Regulations ("EAR"). In order to comply with the requirements of the ITAR and/or the EAR, applicants must qualify as a U.S. person under the ITAR and the EAR, or a person to be approved for an export license by the governing agency whose technology comes under its jurisdiction. Please understand that any job offer that requires approval of an export license will be conditional on AeroVironment's determination that it will be able to obtain an export license in a time frame consistent with AeroVironment's business requirements. A "U.S. person" according to the ITAR definition is a U.S. citizen, U.S. lawful permanent resident (green card holder), or protected individual such as a refugee or asylee. See 22 CFR § 120.15. Some positions will require current U.S. Citizenship due to contract requirements._ **Benefits** : AV offers an excellent benefits package including medical, dental vision, 401K with company matching, a 9/80 work schedule and a paid holiday shutdown. For more information about our company benefit offerings please visit: ********************************* . We also encourage you to review our company website at ******************** to learn more about us. Principals only need apply. NO agencies please. **Who We Are** Based in California, AeroVironment (AVAV) is a global leader in unmanned aircraft systems (UAS) and tactical missile systems. Founded in 1971 by celebrated physicist and engineer, Dr. Paul MacCready, we've been at the leading edge of technical innovation for more than 45 years. Be a part of the team that developed the world's most widely used military drones and created the first submarine-launched reconnaissance drone, and has seven innovative vehicles that are part of the Smithsonian Institution's permanent collection in Washington, DC. Join us today in developing the next generation of small UAS and tactical missile systems that will deliver more actionable intelligence to our customers so they can proceed with certainty - and succeed. **What We Do** Building on a history of technological innovation, AeroVironment designs, develops, produces, and supports an advanced portfolio of unmanned aircraft systems (UAS) and tactical missile systems. Agencies of the U.S. Department of Defense and allied military services use the company's hand-launched UAS to provide situational awareness to tactical operating units through real-time, airborne reconnaissance, surveillance, and target acquisition. _We are proud to be an EEO/AA Equal Opportunity Employer, including disability/veterans. AeroVironment, Inc. is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Qualified applicants will receive fair and impartial consideration without regard to race, sex, color, religion, national origin, age, disability, protected veteran status, genetic data, sexual orientation, gender identity or other legally protected status._ **ITAR** U.S. Citizenship required. Must be willing to work on government contracts and have the ability to obtain a security clearance. **About AV:** **AV isn't for everyone. We hire the curious, the relentless, the mission-obsessed. The best of the best.** We don't just build defense technology-we redefine what's possible. As the premier autonomous systems company in the U.S., AV delivers breakthrough capabilities across air, land, sea, space, and cyber. From AI-powered drones and loitering munitions to integrated autonomy and space resilience, our technologies shape the future of warfare and protect those who serve. Founded by legendary innovator Dr. Paul MacCready, AV has spent over 50 years pushing the boundaries of what unmanned systems can do. Our heritage includes seven platforms in the Smithsonian-but we're not building history, we're building what's next. **If you're ready to build technology that matters-with speed, scale, and purpose-there's no better place to do it than AV.** **Careers at AeroVironment (*****************************************

About the Company Panthalassa is a renewable energy and ocean technology company committed to rapidly developing and deploying technologies that will ensure a sustainable future for Earth by unlocking the vast energy potential of its oceans. Our mission is to capture civilizational levels of ultra-low-cost renewable energy for applications including computing and affordable renewable fuels delivered to shore. We are headquartered in Portland, Oregon, and operate as a public benefit corporation backed by leading venture capitalists, philanthropic investors, and university endowments. Our team includes individuals with experience at SpaceX, Tesla, Apple, Blue Origin, the U.S. military, and leading research universities. We operate as an idea meritocracy-where the best ideas win-and we're building the most capable engineering and operations team on the planet. About the Job We are seeking an experienced Test Engineer, Mechanical and Fluid Systems to design, build, and operate large-scale test equipment for hydraulic turbines, electrical generation powertrains, and high-power equipment. This role requires deep expertise in fluid dynamics, process piping, and mechanical system integration. As a Test Engineer, you will lead the mechanical design and integration of test rigs that handle pressurized water and air to transfer energy. You will work closely with software and controls engineers to create integrated test environments that push the boundaries of power generation technology. This is a hands-on role where you will prototype, build, and troubleshoot alongside world-class engineers and technicians. You will own the end-to-end mechanical development of test systems-from conceptual design through fabrication, assembly, and operation-ensuring our test infrastructure can withstand the extreme conditions required for breakthrough energy technology development. Responsibilities Design, build, modify, and operate custom test rigs for hydraulic turbines, powertrains, and power electronics systems. Design fluid systems and piping networks, including flow/pressure drop analysis and component sizing and selection (pumps, valves, regulators, piping). Design process piping and plant layouts with emphasis on rapid deployment and practical solutions. Design tanks, structures, rigging, and lifting equipment for large loads, including cranes and forklifts. Develop Process and Instrumentation Diagrams (P&IDs) for test rigs. Create 3D CAD models and assemblies using NX. Develop test methodologies, procedures, and safety protocols. Integrate mechanical systems with electrical and control systems in cross-functional collaboration. Interface with tradespeople and vendors for equipment procurement and subcontracted work. Perform hands-on assembly, integration, troubleshooting, and testing. Required Qualifications Bachelor's or Master's degree in Mechanical Engineering or related field. 5-10+ years of experience in large-scale fluid systems design and testing. Strong knowledge of fluid mechanics, thermodynamics, and heat transfer. Proven experience with process piping design, specification, and installation. Experience designing tanks and vessels for large-volume fluid storage. Expert-level proficiency in 3D parametric CAD and PLM (NX preferred; SolidWorks, Catia, Inventor, or Creo acceptable). Experience designing custom machined and welded components for test fixtures and structures. Competency in structural analysis and mechanical design calculations. Working knowledge of electrical power systems and basic connector selection. Familiarity with NFPA 79 (Electrical Standard for Industrial Machinery). Understanding of ASME and ANSI piping/pressure vessel codes. Knowledge of industrial safety practices (DFMEA, PFMEA, HAZOPS). Hands-on mechanical assembly, fabrication, and troubleshooting experience. Experience managing subcontractors and working with skilled trades. Strong written and verbal communication skills. Desired Qualifications Experience with computational fluid dynamics (CFD) analysis. Background in power generation, renewable energy, or heavy industrial equipment. Professional Engineer (PE) license. Experience with crane operations and lift planning. Background in manufacturing or production environments. Familiarity with heat exchangers and fluid conditioning equipment. Experience with high-power and high-pressure systems. Experience with test instrumentation and measurement systems. Familiarity with rapid prototyping and fabrication methods. Experience with programming or scripting (Python, LabVIEW, MATLAB) and data acquisition systems. The above qualifications are desired, not required. We encourage you to apply if you are a strong candidate with only some of the desired skills and experience listed. Additional Requirements Occasional extended hours or weekend work to support key milestones. Strong preference for candidates based in Portland, OR. Compensation and Benefits If hired for this full-time role, you will receive: Cash compensation of $155,000-$200,000. Equity in the company. We're all owners and if we're successful, this equity should be far and away the most valuable component of your compensation. A benefits package that helps you take care of yourself and your family, including: Flexible paid time off Health insurance (the company pays 100% of gold level PPO plan for full time employees, their partners, and dependents) Dental insurance (the company pays 33% for full time employees and 100% for their partners and dependents) Vision insurance (the company pays 100% for full time employees, their partners, and dependents) Disability insurance (the company pays 100% for a policy to provide long term financial support if you become disabled) Ability to contribute to tax-advantaged accounts, including 401(k), health FSA, and dependent care FSA Relocation assistance to facilitate your move to Portland (if needed). Location This is an onsite position. Our offices, lab and shop, are located in Portland, Oregon. Candidates must have the legal right to work in the United States. We are unable to provide new visa sponsorship for this role; however, we may consider H-1B transfer applications from exceptional candida tes.

ReconCraft is seeking a SolidWorks Mechanical Designer to join our growing team in Clackamas, OR. This position plays a key role in the design and development of manned and unmanned boats, leveraging advanced 3D modeling and drafting tools to support our engineering and production teams. The Mechanical Designer will be responsible for developing system layouts, foundation designs, routings, bills of materials, production detailing, CNC cut plate files, fixture designs, and more. The ideal candidate will bring proven expertise in SolidWorks, SolidWorks PDM, and AutoCAD, along with experience supporting manufacturing and production environments. Responsibilities (including but are not limited to): Utilize SolidWorks, SolidWorks PDM, and AutoCAD to create 3D models, assemblies, and detailed production drawings. Collaborate with engineering, production, and fabrication teams to optimize designs for manufacturability, efficiency, and quality. Partner with suppliers and external stakeholders to integrate third-party components into design models. Revise and update existing designs by implementing redline changes and generating revised drawings and solid models. Translate rough concepts and input from end users, maintainers, and fabricators into draft designs and prototypes. Develop jig and fixture designs, including fabrication drawings, machining documentation, and bills of materials. Apply industry design standards, best practices, and technical references to create reliable boat and system designs. Contribute to a collaborative, high-performance team dedicated to advancing marine technology and production innovation. Perform other duties as directed by the Engineering Manager. Essential Job Qualifications and Requirements: Experience: Minimum 3 years of experience in manufacturing design and production using 3D and 2D CAD programs. Hands-on knowledge of marine or transportation mechanical systems preferred. Practical experience with fabrication methods such as welding, CNC cutting and forming, and other modern manufacturing processes. Solid product development experience using SolidWorks to support in-house manufacturing. Preferred Knowledge & Experience Advanced proficiency with SolidWorks, SolidWorks PDM, and AutoCAD. Share expertise, mentor team members, and contribute to team-wide best practices. Physical Requirements Ability to lift up to 25 lbs. Flexibility to work extended hours when required to meet project deadlines or deliverables. About Copper River & The Native Village of Eyak: Owned by the Native Village of Eyak (NVE), a federally recognized Alaska Native Tribe, the Copper River Family of Companies are a collection of entities that deliver a complementary set of solutions and services to support the diverse missions and requirements of our clients. Proud participants of the Small Business Administration's (SBA) 8(a) Business Development Program since 2006, our companies consist of both current and graduation SBA 8(a) entities. It is our collective purpose to support the Tribe and diversify the NVE's ability to facilitate economic advancement. The income generated from our companies helps the Native Village of Eyak fund health and social services, economic development, natural resource/environmental education, jobs, job training, and other benefits to the NVE in a manner that is consistent with Alaskan Native cultural values and traditions. Copper River's Culture The Copper River Family of Companies has a positive, supportive, and thriving culture. At the foundation of our culture is a focus on collaboration. No matter your role or which operating company you work for, we are ONE TEAM working toward the same goals for our customers and for our collective owner- The Native Village of Eyak. How we treat each other is just as important as the work we deliver. Benefits Comprehensive medical, dental, and vision coverage Flexible Spending Account - healthcare and dependent care Health Savings Account - high deductible medical plan Retirement 401(k) with employer match Open leave policy and paid holidays Additional benefits including tuition reimbursement, transportation expense account, employee assistance program, and more! Note: These benefits are only applicable to full time, regular associates at Copper River. Disclaimer: The Copper River Family of Companies provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Job Description ReconCraft is seeking a SolidWorks Mechanical Designer to join our growing team in Clackamas, OR. This position plays a key role in the design and development of manned and unmanned boats, leveraging advanced 3D modeling and drafting tools to support our engineering and production teams. The Mechanical Designer will be responsible for developing system layouts, foundation designs, routings, bills of materials, production detailing, CNC cut plate files, fixture designs, and more. The ideal candidate will bring proven expertise in SolidWorks, SolidWorks PDM, and AutoCAD, along with experience supporting manufacturing and production environments. Responsibilities (including but are not limited to): Utilize SolidWorks, SolidWorks PDM, and AutoCAD to create 3D models, assemblies, and detailed production drawings. Collaborate with engineering, production, and fabrication teams to optimize designs for manufacturability, efficiency, and quality. Partner with suppliers and external stakeholders to integrate third-party components into design models. Revise and update existing designs by implementing redline changes and generating revised drawings and solid models. Translate rough concepts and input from end users, maintainers, and fabricators into draft designs and prototypes. Develop jig and fixture designs, including fabrication drawings, machining documentation, and bills of materials. Apply industry design standards, best practices, and technical references to create reliable boat and system designs. Contribute to a collaborative, high-performance team dedicated to advancing marine technology and production innovation. Perform other duties as directed by the Engineering Manager. Essential Job Qualifications and Requirements: Experience: Minimum 3 years of experience in manufacturing design and production using 3D and 2D CAD programs. Hands-on knowledge of marine or transportation mechanical systems preferred. Practical experience with fabrication methods such as welding, CNC cutting and forming, and other modern manufacturing processes. Solid product development experience using SolidWorks to support in-house manufacturing. Preferred Knowledge & Experience Advanced proficiency with SolidWorks, SolidWorks PDM, and AutoCAD. Share expertise, mentor team members, and contribute to team-wide best practices. Physical Requirements Ability to lift up to 25 lbs. Flexibility to work extended hours when required to meet project deadlines or deliverables. About Copper River & The Native Village of Eyak: Owned by the Native Village of Eyak (NVE), a federally recognized Alaska Native Tribe, the Copper River Family of Companies are a collection of entities that deliver a complementary set of solutions and services to support the diverse missions and requirements of our clients. Proud participants of the Small Business Administration's (SBA) 8(a) Business Development Program since 2006, our companies consist of both current and graduation SBA 8(a) entities. It is our collective purpose to support the Tribe and diversify the NVE's ability to facilitate economic advancement. The income generated from our companies helps the Native Village of Eyak fund health and social services, economic development, natural resource/environmental education, jobs, job training, and other benefits to the NVE in a manner that is consistent with Alaskan Native cultural values and traditions. Copper River's Culture The Copper River Family of Companies has a positive, supportive, and thriving culture. At the foundation of our culture is a focus on collaboration. No matter your role or which operating company you work for, we are ONE TEAM working toward the same goals for our customers and for our collective owner- The Native Village of Eyak. How we treat each other is just as important as the work we deliver. Benefits Comprehensive medical, dental, and vision coverage Flexible Spending Account - healthcare and dependent care Health Savings Account - high deductible medical plan Retirement 401(k) with employer match Open leave policy and paid holidays Additional benefits including tuition reimbursement, transportation expense account, employee assistance program, and more! Note: These benefits are only applicable to full time, regular associates at Copper River. Disclaimer: The Copper River Family of Companies provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Senior Mechanical Engineer SALARY | $130k-$160k DOE JOIN OUR TEAM! We are a leading design-build mechanical contractor serving Oregon and Southwest Washington. Our comprehensive services include new construction, tenant improvement, engineering, maintenance, controls, energy services, and commissioning, making us a one-stop solution for our clients' mechanical needs. What sets us apart is our commitment to collaboration and efficiency. Our team of skilled professionals works together to deliver high-quality projects that save our clients time, money, and stress. We've built a solid reputation for excellence across various sectors, including commercial, educational, healthcare, manufacturing, and more. Whether it's a small retail renovation or a large-scale office tower, we approach every project with the same level of dedication and expertise. WHAT WE'RE LOOKING FOR We are seeking a talented Senior Mechanical Engineer with 7-10 years of experience in HVAC design. This role requires a PE License and a passion for delivering high-quality engineering solutions. KEY RESPONSIBILITIES Lead the design and development of HVAC systems for a variety of project types, ensuring compliance with industry standards and client specifications. Collaborate closely with our design-build team to integrate mechanical systems seamlessly into overall project plans. Oversee the preparation of detailed engineering calculations, construction documents, and specifications. Provide technical leadership and mentorship to junior engineers and other team members. Engage with clients, contractors, and other stakeholders to ensure project objectives are met. Stay updated with industry trends and emerging technologies to continuously improve our service offerings. WHAT YOU BRING TO THE TABLE 7-10 years of experience in HVAC design, with a proven track record in delivering successful projects. Professional Engineer (PE) License is required. Strong knowledge of mechanical systems, materials, and industry standards. Excellent communication skills, with the ability to convey complex technical information to non-technical stakeholders. Ability to manage multiple projects simultaneously while maintaining a high level of quality. Proficiency in relevant engineering software and tools. WHY US? Join a company that is not only recognized as a leader in the mechanical contracting industry but also values its employees' growth and development. We offer competitive compensation, excellent benefits, and a dynamic work environment where collaboration and innovation are encouraged. If you're ready to take your career to the next level and be part of a team that makes a real impact, we want to hear from you!

We are partnering with an innovative renewable energy company that is harnessing the power of the open ocean-Earth's largest and most power-dense renewable resource-to deliver abundant, affordable clean energy. They are seeking a Lead Mechanical Engineer to play a critical role in the design, development, and deployment of the turbogenerator within their core technology. This is a hands-on position where you'll guide the technical vision while also prototyping, testing, and problem-solving alongside a world-class team. If you are passionate about renewable energy and want to help build technology that can transform the future of clean power, this is your chance. The role is located in Portland, OR. Benefits: Salary: $175k - $250k/year. If your target pay is higher, we still encourage you to apply-we could request adjustments based on experience and market conditions. Equity. Flexible PTO (with minimum 3 weeks required). 100% employer-paid medical insurance. Dental & Vision insurance. 401k. Relocation Assistance. Other excellent benefits! What You'll Do: Lead the design, development, and integration of the turbogenerator system. Define and own performance requirements and design goals. Design and analyze key components: shafts, housings, bearings, dynamic seals, turbine blades, and stators. Select advanced materials and coatings for long-term marine deployment. Collaborate across electromagnetics, controls, fluid dynamics, and marine operations teams. Drive manufacturability, offshore assembly, and serviceability in design. Lead and participate in design reviews with internal teams and external vendors. Oversee documentation, drawings, and tolerance analysis. Mentor technicians and guide prototyping, fabrication, and testing. Troubleshoot issues, conduct root cause analysis, and iterate designs. Utilize high-end CAD (NX), PDM (Teamcenter), and FEA tools. Required Qualifications: Bachelor's degree in Mechanical Engineering, Aerospace Engineering, Naval Architecture, or related. Extensive experience with rotating machinery (pumps, turbines, compressors, turbochargers, etc.). 5+ years of 3D CAD modeling experience. Strong knowledge of GD&T, tolerance stack-ups, and FEA. Hands-on experience assembling tight-tolerance rotating equipment. Proven ability to manage projects from concept through test and deployment. Strong communication, leadership, and problem-solving skills. Desired Qualifications (a plus, not required): Advanced degree or additional 5 years of experience. Prior leadership of engineering teams. Background in marine/offshore machinery design. Experience with subsea bearings, hydrodynamic/hydrostatic bearings, or piping systems. Familiarity with rapid prototyping and instrumentation/controls. NX/Teamcenter, NASTRAN, FEMAP, or similar analysis software. Programming/data analysis with Python or Julia. Application Process If your experience matches the description above, submit your resume, and one of our recruiters will be in touch to tell you more about the position and learn more about your experience and aspirations. If your experience does not match this job description, we still encourage you to reach out to one of our recruiters, so we can learn about your professional aspirations for future job openings. About Bemana Bemana provides recruiting services to the nation's equipment and industrial sectors. Our clients and candidates value us for our specialized recruiting expertise, vast knowledge of the equipment and industrial job market, and ability to solve their most challenging employment needs. We have successfully recruited thousands of top-level professionals filling a wide range of management, sales, engineering, and technical positions across the nation. Welcome to Bemana and we look forward to getting to know more about you. Referral Program Bemana offers a $500 reward for referrals that lead to a hire. So, if this job or location is not for you, but you know someone that might be interested, send them this link and we'll send you a check if they get hired. Terms & conditions apply.

Job Details BASX Redmond - Redmond, OR $25.29 - $37.94 Hourly DayJob Posting Date(s) 07/31/2025Description Back to the “BASX.” With core values based on People, Product, Pride and Perseverance, BASX, located in Redmond, OR, was founded in 2014 by two entrepreneurial engineers who had a vision for providing precision air handling systems. Fast forward just 10 years, BASX, now an integral part of AAON, is an industry leader in the innovative research, development, design and manufacturing of custom heating, ventilation, and air conditioning (HVAC) solutions. Our goal is to partner with companies, in a wide range of industries such as data centers, clean rooms and surgery centers, who come to us with complex challenges that need to be resolved. Our team has a world-class reputation for manufacturing custom HVAC solutions that exceed our customers' needs and expectations, and we are proud to manufacture over 90% of our units, from start to finish, right here in beautiful Central Oregon. Our team is rapidly increasing, from 200 employees in 2022 to over 800 today, to meet the demand for our innovative solutions, and we are looking for talented individuals within a broad range of specialties to continue this incredible growth. If you are looking for a job in a dynamic, fast-paced, growing, and fun environment where you can develop and hone your skills, we want to meet you. Our team enjoys flexible shift schedules and generous benefits, including medical, dental and vision, and short- and long-term disability as well as both a 401(k) and an HSA (Health Savings Account) with a 175% employer match. We welcome people who have a passion for ingenuity, perseverance, and pride, and who love innovation and the satisfaction of knowing their work matters. Job Summary: Responsible for developing and creating models and assemblies using CAD for various types of HVAC equipment-including conceptual designs and parametric modeling. Reviews schematics for designs and makes design recommendations. May coach and mentor less experienced team members. Essential Job Duties and Responsibilities: Develops models and drawings including conceptual designs, parametric modeling and new technologies using computer design software (CAD). Reviews schematics for designs and makes design recommendations. Collaborates with other designers and engineers to ensure that the structural and mechanical designs integrate seamlessly with other systems. Collaborates with Engineers, management, and other creative departments to determine design solutions. Provides support to production team during prototypes and production launch to facilitate seamless releases and is trusted as a point person or go to for manufacturing issues. Seeks ways to implement new ideas and technologies. Collaborates with the Design Engineering team to develop design standards. Confers with engineering management to complete assigned projects. Provides complete bills of material by defining when, where, and why specific parts are used. Supports DFMEAs, PFMEAs, CFD, FEA, and Seismic evaluations and testing. Understands safety standards including but not limited to UL, CE, NEC, IBC, and NFPA. Maintains and builds professional and technical knowledge by attending educational workshops, reviewing professional publications, or participating in professional societies. Qualifications Education and Experience Requirements: A two-year technical degree is preferred, and 5 years' experience in the HVAC industry or equivalent experience in a similar industry. Knowledge, Skills, and Abilities: Excels in mechanical and structural analysis of assemblies. Demonstrates excellent mechanical, structural and design aptitude. Communicates effectively in written and spoken form. Demonstrates excellent interpersonal relationship skills. Exhibits good decision making and analytical problem-solving abilities. Demonstrates strong multi-tasking capabilities and organizational skills. Works effectively in a fast-paced, high-pressure, team environment. Work Environment: Frequent exposure to manufacturing facilities with seasonal hot and cold temperatures, dust, and some chemical fume exposure. Ability to sit and/or stand for prolonged periods of time. Work is performed in a climate-controlled office setting. Occasional travel as required.

If you are looking to work for a dynamic and growing company performing engineering services for world leaders in the technology and industrial sectors, Corbin Consulting is the place for you. Challenge yourself and have fun working with a team of top performers who have earned a reputation for excellence among their clients and peers. Work for an employee-owned company that values its people and allows you to shape your future as you help the company continue its relentless growth. Advantages of working for Corbin Consulting Engineers: • Employees control their career advancement. You will have direct access to key project players, including design managers, disciplines designers, and officers. • Design building systems for leaders in the advanced technology, industrial sector and life sciences sectors. • Corbin serves a wide variety of clients with a myriad of unique projects and design challenges, providing a variety of working experiences. • We are not “corporate”; we are an engineering company committed to delivering excellence for our clients. Summary: We are seeking a junior mechanical engineer for our Beaverton office who will work with a competent multi-discipline team of peers with a wide range of experience levels. Responsibilities: • Designing mechanical and process systems and preparing construction documents with varying degrees of complexity. You will work with facility HVAC, process piping and exhaust, hydronic systems, and chip manufacturing equipment installations. • Preparing engineering studies for mechanical and process systems that survey existing conditions, evaluate capacities, and make recommendations for corrections and upgrades. • Preparation of P&ID drawings for various systems, construction specifications, sequence of operations, testing documents, and engineering reports. • Coordinating with other engineering team members, including those from other technical disciplines. • Conducting site investigations to confirm and document field conditions. Requirements • Understanding of basic building code requirements. • Excellent interpersonal skills and a team player. • Excellent technical writing ability. • Highly organized. • Must show ownership and follow-through on assigned projects. • Interest in professional growth. • Ability to learn quickly and grasp new concepts, especially as they relate to engineering and construction. • Proficiency with Microsoft Office Suite. • Familiarity with AutoCAD, Revit, and Bluebeam is a plus. Education and Experience: • Bachelor's degree in mechanical engineering from an accredited university. • 3+ years of experience working for an architectural/engineering (A/E) consulting firm. • Experience with advanced technology and industrial clients is preferred. • Possessing an EIT certification, or will in the near future. Please identify any relevant skills you might have, such as AutoCAD or Revit, or mechanical system modeling software such as PIPE-FLO, Trane Trace, Autodesk CFD, or AutoPIPE. Additionally, you may provide any past work or volunteer experience in your response, including those that may be non-engineering related. Wages/Benefits: We offer a very competitive compensation package within the engineering consulting industry. • Flexible work hours. • Comprehensive medical, prescription, dental and vision plans. • 401(k) plan with company matching • Employee Stock Ownership Plan (ESOP), offering benefits of company ownership through accumulation of available stock in a tax-deferred retirement account. • Three weeks of Personal Time Off (PTO) • Eight paid holidays per year. • Up to $3000/year in yearly tuition reimbursement for coursework relevant to your position. • Employer paid Life Insurance & Long-Term Disability. • Opportunities to learn engineering outside of work, such as lunchtime seminars with industry experts and professional development hour compensation.

Job Description ✈️ Mechanical Designer - Aerospace Manufacturing Duration: 18-month contract A growing aerospace engineering team is seeking a Mechanical Designer to support the development of aircraft systems, assemblies, and components. This role is ideal for a hands-on CAD professional with extensive SolidWorks experience and a strong background in design for manufacturing, particularly within regulated aerospace or defense environments. Key Responsibilities: Design and model mechanical components, systems, and assemblies in SolidWorks Create 2D/3D drawings, BOMs, layout studies, and technical documentation to FAA/AS9100 standards Collaborate with cross-functional engineering teams to optimize designs for performance and manufacturability Conduct tolerance stack-ups and ensure compliance with GD&T practices Participate in prototyping, installation fit checks, and shop floor validation Support lifecycle processes including design reviews, change management, and production engineering Ensure accuracy and completeness of documentation per internal and regulatory standards Qualifications: 3-5+ years of mechanical design experience in aerospace, defense, or complex manufacturing settings Strong proficiency in SolidWorks (required); experience with AutoCAD, CATIA, or similar tools a plus Associate's or Bachelor's degree in Mechanical Engineering, Drafting Technology, or equivalent experience Strong understanding of DFM, GD&T, and engineering documentation practices Prior experience with aircraft structures, assemblies, or FAA-regulated projects preferred Attention to detail, analytical mindset, and strong team collaboration skills Additional Info: U.S. work authorization required Onsite position; must be able to work from the production facility in Medford, OR Must be able to obtain any required background clearances

Our Culture DZYNE Technologies is leading the future of autonomous defense. Based in Irvine, California, we develop and manufacture advanced airborne and ground-based defense solutions deployed in over 50 countries. Backed by U.S. Government Programs of Record, our technologies are field-proven, scalable, and production-ready. We're growing fast and looking for innovators ready to make an impact. At DZYNE, you'll join a culture built on collaboration, integrity, and purpose. We celebrate wins, value diverse perspectives, and support every team member's success. Ready to do work that matters? Join us. Position: Senior Mechanical Engineer Location: Portland, OR Position Description: We are seeking a Mechanical Engineer with a strong background in product design and development to join our growing engineering team. The ideal candidate will have at least 7 years of experience in mechanical product design, with demonstrated success taking concepts from requirements definition through prototyping, testing, and production. This role offers the opportunity to directly impact the design and fielding of next-generation C-UAS products. Required Skills/Qualifications: Excellent written and oral communication skills Adaptable, eager to learn, and create, with a proactive attitude towards continuous improvement Ability to work in a small team to rapidly prototype and develop new products 7+ Related work experience design, analysis and testing in a manufacturing environment Experience with 3-D CAD tools such as SolidWorks and PDM tools Preferred Skills/Qualifications: Experience in aerospace, defense, or high-reliability industries. Knowledge of military/aerospace standards and ruggedized system design practices e.g. MIL-STD-810G. Hands-on experience with finite element analysis (FEA) or thermal analysis tools. Familiarity with additive manufacturing, injection molding, and lightweight structures. Demonstrated track record of taking products from concept to production. Education: Bachelor of science degree or above in Mechanical Engineering or related field Clearance Level Required: Clearance not required Travel: Up to 10% Working Conditions: The diversity of work conditions may range from an environment where there is little or no physical discomfort, such as a general office environment or warehouse. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Must have the ability to stand, climb, occasionally lift a minimum of 25 lbs. Regularly required to crouch and reach to install/move equipment by bending forward at the waist or by bending legs and spine Involves movement between departments, floors, and worksites to facilitate work. May be performing physical activities including, but not limited to, heavy lifting and moving of items, climbing in and out of equipment, crawling, and working outdoors. Other Requirements: It is an essential requirement for the person in this role to have a legal right to work in the United States and be eligible to obtain any required Export Authorization and DoD Clearance. Salary: $130,000 - $150,000 annually Salary depends on relevant work experience, education, training, essential skills, and/or other factors such as specialized or high-demand professions. In addition to the annual salary, the position will be eligible for an annual bonus. The pay range for this job level is a general guideline only and not a guarantee of salary or annual bonus. Benefits: Our benefits are DZYNE'ed for your overall health and financial wellness. DZYNE provides comprehensive medical, dental, and vision plans, employee life and accidental death, and disability. #LI-HYBRID/#LI-REMOTE/#LI-ONSITE

REQUIREMENTS - Patent preparation and prosecution experience, either in-house or as outside counsel, specifically in the mechanical arts (e.g., recreational vehicles, industrial devices, medical devices, and consumer devices) - A BS degree in mechanical engineering is preferred, although candidates with other degrees will be considered - Additional legal, industry, and/or academic experience in mechanical engineering or related fields is desirable - Active bar admission in Oregon or Washington - Registered to practice before the USPTO - Strong time management and organizational skills, including demonstrated ability to take ownership for, and efficiently manage, a large docket including meeting internal and external deadlines - Familiarity with operations of large organizations with established patent programs, including international organizations - Strong work ethic and commitment to being responsive to client needs - Excellent writing, communication and interpersonal skills - Ability to collaborate and work effectively with a variety of internal and external stakeholders - Demonstrated ability working independently SUMMARY Vanguard Intellectual Partners (Vanguard-IP) specializes in the placement of IP/Patent professionals nationwide. Our sole focus on intellectual property enables us to more deeply understand our clients' technical needs, and our candidates' individual talents and career interests. Our broad network of long-term client relationships gives us a competitive edge. Our recruiters all have 10+ years of IP recruiting experience, and an exceptional record of success. We have superior knowledge of the IP job market, and offer trusted career advice for our candidates. We also have the resources and high-level contacts to get your resume noticed by the people who matter. We look forward to speaking with you, and learning more about what you are seeking in your next opportunity. CONFIDENTIALITY At Vanguard-IP, we respect the confidentiality of every candidate who contacts us. Furthermore, we will always obtain expressed authorization before submitting your resume to any of our clients. **Should you have an interest in exploring opportunities in another location, we have hundreds of openings in other markets. Please apply now and our team would be happy to review your information for this or other openings in your location of interest.

Harris Group thrives on providing expert engineering for some of today's most complex challenges. We are creative in our approach by delivering multi-discipline services across a wide range of project types. Our successes are directly related to high-quality collaboration, across all offices, expertise, and backgrounds. Harris Group is a 100% Employee-Owned company with our eyes focused on the people in the company, the clients we serve, and the communities in which we live. Harris Group is looking for a Senior Mechanical Engineer to be based in our Portland, OR office. This role is responsible for providing professional engineering expertise to our projects that seek to positively impact both the community and the environment. The incumbent will work on innovative designs and see diverse projects through development, detailed design, commissioning, and construction support. What We Can Offer You * Variety of project types: Life Science, Industrial Manufacturing, Biofuels, Chemical Plants, Institutional, and Commercial Facilities * Work on multi-disciplinary teams, collaborating with engineers and architects from all engineering disciplines. * Ownership in Harris Group with line of sight to yours and overall company successes. * Career growth with opportunities to lead teams * Training & Education Assistance to support your career goals. * Flexible Work: Hybrid opportunities * A passionate team and collaborative environment focused on excellence in delivery. The Role This Senior Mechanical Engineer will work primarily on projects within industrial manufacturing, life sciences (biopharmaceutical), pulp and paper, and fuel terminal piping and tanks. Additional projects may include work within process industries, air and sea ports, energy, commercial development, and other business sectors. The ideal candidate will be entrepreneurial and self-motivated, passionate of the Mechanical discipline, and communicative with team members and clients. At Harris Group, you are an owner via our Employee Stock Ownership Program (ESOP) and have an opportunity to be a shareholder in the company based on embracing our values: * Think Like an Owner * Seek Shared Success * Doing the Right Thing * Embrace Hard Work * Pursuing Continuous Improvement * Designing Sustainably The Responsibilities * Serve as a technical resource on complex designs and advance engineering theories, concepts, principles, and processes. * Perform mechanical design, working with other members of the mechanical staff, and coordinate with other disciplines on specific projects. * Prepare design calculations and documentation that support the project design basis. * Prepare mechanical drawings, through the use of designers or drafters, and develop specifications. * Coordinate design with vendor supplied equipment. * Prepare equipment layouts and general arrangements. * Prepare construction bid packages and construction specifications. * Assist in preparation and presentation of proposals, including scope of services and fee estimate. * Support sectors with business development activities and proposal input. The Requirements Bachelor's degree in Mechanical Engineering and a minimum of 7 years of relevant experience. * Registration as a Professional Engineer (PE) is required. * Working knowledge of facility/building mechanical systems including HVAC and plumbing. * Familiarity with process system design and equipment including pumps, fans, heat exchangers, cooling towers, boilers, chillers, conveyors, and air handlers is also important. * Ability to identify, interpret and apply relevant codes and standards to engineering designs. * Ability to develop and maintain relationships with prospective clients, vendors, and constructors. * Proficient with MSOffice suite. * Experience with AutoCAD, CADWorx, or Revit, a plus. * Knowledge of Caesar (preferred) or Autopipe pipe stress software, desired. * Knowledge of PIPE-FLO preferred. * Ability and willingness to travel to an off-site location and/or accept client site assignments when required. Benefits * Salary Range: $120,000-$150,000/year depending on location, education, experience, and any certifications that are directly related to the position. * Benefits include health, dental, and vision insurance, life insurance, 401K retirement savings plan (with company matching), PTO & paid holidays. * Harris Group is proud to be an employee-owned company; the ESOP (Employee Stock Ownership Plan) provides an exciting employee wealth building opportunities of our employees. Equal Opportunity Employer Harris Group provides a competitive compensation and benefits package and is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, national origin, ethnicity, religion, age, sex, sexual orientation, gender identity, disability, protected veteran status, or any other characteristic protected by federal, state or local laws. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation. Drug Free Workplace Harris Group, Inc. is a 100% drug free workplace. For the safety of our employees, customers, and our customer's facilities, we do a pre-employment drug test and may require random testing to meet specific client needs. Please note that Marijuana, even if prescribed by a physician OR allowed under a state law regulating Marijuana, remains illegal under federal law and is against Harris Group's policy. We look forward to receiving your resume!

ReconCraft is seeking a SolidWorks Mechanical Designer to join our growing team in Clackamas, OR. This position plays a key role in the design and development of manned and unmanned boats, leveraging advanced 3D modeling and drafting tools to support our engineering and production teams. The Mechanical Designer will be responsible for developing system layouts, foundation designs, routings, bills of materials, production detailing, CNC cut plate files, fixture designs, and more. The ideal candidate will bring proven expertise in SolidWorks, SolidWorks PDM, and AutoCAD, along with experience supporting manufacturing and production environments. Responsibilities (including but are not limited to): * Utilize SolidWorks, SolidWorks PDM, and AutoCAD to create 3D models, assemblies, and detailed production drawings. * Collaborate with engineering, production, and fabrication teams to optimize designs for manufacturability, efficiency, and quality. * Partner with suppliers and external stakeholders to integrate third-party components into design models. * Revise and update existing designs by implementing redline changes and generating revised drawings and solid models. * Translate rough concepts and input from end users, maintainers, and fabricators into draft designs and prototypes. * Develop jig and fixture designs, including fabrication drawings, machining documentation, and bills of materials. * Apply industry design standards, best practices, and technical references to create reliable boat and system designs. * Contribute to a collaborative, high-performance team dedicated to advancing marine technology and production innovation. * Perform other duties as directed by the Engineering Manager. Essential Job Qualifications and Requirements: * Experience: * Minimum 3 years of experience in manufacturing design and production using 3D and 2D CAD programs. * Hands-on knowledge of marine or transportation mechanical systems preferred. * Practical experience with fabrication methods such as welding, CNC cutting and forming, and other modern manufacturing processes. * Solid product development experience using SolidWorks to support in-house manufacturing. * Preferred Knowledge & Experience * Advanced proficiency with SolidWorks, SolidWorks PDM, and AutoCAD. * Share expertise, mentor team members, and contribute to team-wide best practices. * Physical Requirements * Ability to lift up to 25 lbs. * Flexibility to work extended hours when required to meet project deadlines or deliverables. About Copper River & The Native Village of Eyak: Owned by the Native Village of Eyak (NVE), a federally recognized Alaska Native Tribe, the Copper River Family of Companies are a collection of entities that deliver a complementary set of solutions and services to support the diverse missions and requirements of our clients. Proud participants of the Small Business Administration's (SBA) 8(a) Business Development Program since 2006, our companies consist of both current and graduation SBA 8(a) entities. It is our collective purpose to support the Tribe and diversify the NVE's ability to facilitate economic advancement. The income generated from our companies helps the Native Village of Eyak fund health and social services, economic development, natural resource/environmental education, jobs, job training, and other benefits to the NVE in a manner that is consistent with Alaskan Native cultural values and traditions. Copper River's Culture The Copper River Family of Companies has a positive, supportive, and thriving culture. At the foundation of our culture is a focus on collaboration. No matter your role or which operating company you work for, we are ONE TEAM working toward the same goals for our customers and for our collective owner- The Native Village of Eyak. How we treat each other is just as important as the work we deliver. Benefits * Comprehensive medical, dental, and vision coverage * Flexible Spending Account - healthcare and dependent care * Health Savings Account - high deductible medical plan * Retirement 401(k) with employer match * Open leave policy and paid holidays * Additional benefits including tuition reimbursement, transportation expense account, employee assistance program, and more! Note: These benefits are only applicable to full time, regular associates at Copper River. Disclaimer: The Copper River Family of Companies provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. Create a Job Alert Interested in building your career at The Copper River Family of Companies? Get future opportunities sent straight to your email. Create alert

At KPFF Consulting Engineers, we are more than just an engineering design firm. For 65 years, we have dedicated ourselves to innovative, sustainable engineering that shapes the built environment and tackles complex infrastructure challenges. Our team culture emphasizes balance, growth, and well-being, supporting each member's professional journey with flexibility, generous benefits, and a collaborative approach to work-life integration. With over 1,400 professionals across 30 offices nationwide, KPFF's decentralized structure allows each office the flexibility to pursue projects aligned with their regional strengths. Learn more at ************* Job Description What are your plans for next summer? At KPFF, we are looking for Protective Design Engineer Interns to join our team of engineers in San Francisco and Portland who are eager to apply their skills to projects that focus on the safety, resilience, and security of the built environment. As an intern with us, you will have the opportunity to contribute to projects that involve blast analysis, progressive collapse evaluation, anti-ram design, and structural hardening for federal, commercial, and infrastructure clients. You won't just observe, you'll play an active role in the engineering process and learn how protective design integrates with structural engineering to safeguard people and critical facilities. Here's what you can expect: Hands-on project work: Support protective design projects through modeling, analysis, and design of structures that meet rigorous safety and security criteria. Exposure to unique methods: Learn about blast-load considerations, progressive collapse mitigation, and advanced protective measures alongside experienced protective design specialists. Comprehensive mentorship: Receive guidance from engineers who are experts in both structural and protective design. Site and field exposure: Gain experience with construction administration, site visits, and interactions with multidisciplinary teams, clients, and partners. Team collaboration: Work in a collaborative environment where protective design intersects with structural, civil, and other engineering disciplines. Career development: Build a strong foundation in protective design that will set you apart as you enter the engineering profession. Qualifications A strong passion for pursuing a career in structural or protective design engineering, ideally with interest in resilience, safety, and security of structures. Currently enrolled in a Bachelor's program in Civil or Structural Engineering (junior level or higher, with at least three years of completed coursework) or a Master's program in structural engineering. Coursework or exposure to structural dynamics, steel design and/or concrete design is preferred. Excellent communication and teamwork skills. Strong time management and organizational abilities. Proficiency in Microsoft Excel and Word; experience with structural analysis software (ETABS, SAP2000, RISA, or LS-DYNA) is a plus. Physical Requirements Ability to work on a computer for extended periods of time. Comfort with conducting site visits and navigating construction sites, including climbing ladders and walking on uneven terrain. Ability to lift up to 15 pounds of equipment or materials. Additional Information How to Apply If you're excited to start your career with us, submit your application online, including a cover letter, resume, and your current unofficial transcripts. Please note that this internship requires you to be onsite and is not a remote position . Compensation KPFF is committed to recognizing the valuable contributions of our interns by offering compensation that reflects market standards and aligns with the local cost of living. This role offers a competitive hourly rate ranging from $30.00 to $34.00, based on experience and qualifications. In addition to hourly pay, interns at KPFF benefit from: Paid overtime opportunities when project needs require additional hours. Exposure to a wide variety of projects that add real value to your academic and professional development. Mentorship and training that are part of KPFF's investment in future engineers. Networking and career growth opportunities, including the potential for full-time employment after graduation. Our Culture At KPFF, interns are valued as key contributors to our success. We cultivate a collaborative, innovative, and supportive work environment that empowers individuals to take ownership of their projects. Interns at KPFF experience a dynamic workplace where autonomy and creativity are encouraged. Our team takes pride in mentoring interns and sharing professional insights to help shape the next generation of engineers. KPFF Consulting Engineers participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. KPFF Consulting Engineers is an equal opportunity employer and considers all qualified applicants for employment without regard to race, color, creed, ethnicity, national origin, religion, marital status, sex/gender (including sexual orientation or gender identity), pregnancy, veteran status, citizenship status, physical or mental disability, or any other protected basis.

Own your future as an intern at Ecolab! Our internship program provides you with invaluable insights from leaders across Ecolab, engaging and challenging projects, opportunities for personal and professional growth, extensive networking, and the chance to immerse yourself in our innovative and dynamic environment. Ecolab is seeking Paper & Pulp Engineering Technical Sales Interns to partner with experienced Field Sales Representatives to learn our approach to account management, customer service, and how technical expertise is used to solve problems for customers and develop business within our Paper & Pulp industry. You will combine a traditional engineering approach with a consultative sales approach focused on strong account leadership skills and retention of strategic accounts. You will also learn how to build long-term relationships with a large customer base by understanding their key business drivers, providing strategic resolution through hands-on problem solving, and offering new digital technology solutions. What's in it For You: The opportunity to take on some of the world's most meaningful challenges, helping customers achieve clean water, safe food and healthy environments The ability to make an impact and shape your career with a company that is passionate about growth The support of an organization that believes it is vital to include and engage diverse people, perspectives and ideas to achieve our best Apply what you learn in the classroom to meaningful projects that have genuine business impact Finish your internship with a realistic job preview of what a “day in the life” of an Ecolab associate looks like Be considered for a full-time job offer (to start upon graduation) at the end of a successful internship into an Associate Distrct Representative role. What You Will Do: Complete an independent project(s) under primary trainer's direction to yield calculated ROI Complete safety training & technical lessons that serve as an introduction to water treatment applications Observe and participate in service as it is provided to customers to assure accurate chemical application, process optimization and documentation Complete introductory training of the consultative sales approach Visit multiple customer sites across the region (40-100% of training time spent in field) to learn best practices and types of unit applications and treatment approaches Build key relationships and interaction with departments and personnel that will be critical to success in the field Work within various regional sales districts and customer locations to build specific technical knowledge and gain sales experience while helping customers achieve their sustainability goals. Provide routine service support to Sales Representatives. May be subject to testing including; Boilers, Cooling towers, Paper process streams. Position Details: 11-week paid internship program, starting on Monday, June 1st Willing to relocate within the United States. Nationwide locations available Relocation assistance may be available Opportunity for a hybrid work environment, balancing field days with working remotely Minimum Qualifications: Pursuing undergraduate degree in Engineering (Chemical, Mechanical, Environmental, Industrial or related) graduating in December 2026 or Summer 2027 Immigration sponsorship not available for this role Position requires a valid US Driver's License and acceptable motor vehicle record and access to a personal vehicle Physical Demands: Position requires lifting/pushing/carrying up to 50 pounds chest high About Ecolab A trusted partner at nearly three million customer locations spanning over 170 countries, Ecolab is the global leader in water, hygiene and infection prevention solutions and services. Our team delivers comprehensive solutions, data-driven insights and personalized service to advance food safety, maintain clean and safe environments, optimize water and energy use, and improve operational efficiencies and sustainability for customers in the food, healthcare, hospitality and industrial markets. When you come to work at Ecolab, you get to take on some of the world's most meaningful challenges and have the opportunity to learn and grow, shape your career, make an impact and quickly see the importance of your work. For more Ecolab news and information, visit *************** Follow us on Twitter @ecolab, Facebook at facebook.com/ecolab, LinkedIn at Ecolab or Instagram at Ecolab Inc. Annual or Hourly Compensation Range: $23 - 25$ Hourly Many factors are taken into consideration when determining compensation, such as experience, education, training, geography, etc. We comply with all minimum wage and overtime laws. Benefits Ecolab provides the following benefits: medical, dental, vision, life insurance, accident insurance, critical illness insurance, hospital indemnity insurance, auto insurance, home insurance, pet insurance, identity theft protection, short-term and long-term disability, 401k, pension plans, retirement health care benefits, short-term incentives, vacation (12 days), holidays, parental leave, employee stock purchase plans (Full-Time Associates), discount on day care services and caregiver services, adoption assistance, group legal services, employee assistance program, employee discount program, and education assistance program, on-Site childcare and fitness facilities may be available at select Ecolab locations. Click here for additional benefits information. If you are viewing this posting on a site other than our Ecolab Career website, view our benefits at jobs.ecolab.com/working-here . Potential Customer Requirements Notice To meet customer requirements and comply with local or state regulations, applicants for certain customer-facing roles may need to: - Undergo additional background screens and/or drug/alcohol testing for customer credentialing. - Be fully vaccinated for COVID-19, including a booster if eligible, unless a religious or medical accommodation is requested by the applicant and approved by Ecolab. Americans with Disabilities Act (ADA) Ecolab will provide reasonable accommodation (such as a qualified sign language interpreter or other personal assistance) with our application process upon request as required to comply with applicable laws. If you have a disability and require accommodation assistance in this application process, please visit the Recruiting Support link in the footer of each page of our career website.

Location: Bend, Portland, OR. Santa Cruz, Monterey, CA, or surrounding areas. Remote applicants within the U.S. will be considered based on qualifications and salary alignment. Remote applicants must be able to work within Pacific Time Zone hours. Summary/Objective The Senior Mechanical Engineer plays a critical role in guiding design excellence, leading mechanical discipline design, and ensuring the successful execution of projects across ColeBreit Engineering's diverse portfolio. This position combines technical depth, project leadership, and mentorship. Acting as Engineer of Record (EOR) on multiple projects, the Senior Mechanical Engineer leads HVAC, plumbing, and/or fire protection system design from concept through construction, ensuring quality, compliance, and innovation. Reporting to a Principal or Associate Principal, this role provides discipline leadership on assigned projects, mentors junior staff, and serves as a key technical resource for both internal teams and clients. The Senior Mechanical Engineer partners closely with Project Managers, Project Executives, and design teams to deliver coordinated, efficient, and high-quality engineering solutions while fostering ColeBreit's culture of collaboration and excellence. Essential Duties and Responsibilities Technical Discipline Leadership (~50%) Serve as discipline lead and Engineer of Record on assigned projects, ensuring all designs meet regulatory codes, client expectations, and ColeBreit standards. Oversee and perform advanced design of HVAC, plumbing, and hydronic systems, including heating/cooling loads, ventilation, and energy/economic analysis. Select, size, and specify mechanical equipment and layout mechanical rooms, accounting for constructability and serviceability. Lead and review production work in Revit and AutoCAD, ensuring coordination with other disciplines. Prepare and review calculations, control sequences, system diagrams, and specifications. Conduct independent QA/QC reviews on mechanical designs and ensure adherence to company technical standards. Perform and document site observations, respond to RFIs, review submittals, and collaborate with contractors and AHJs to ensure conformance with construction documents. Track discipline hours and identify potential scope changes early to maintain alignment with project budgets and deliverables. Technical Delivery and Team Coordination (~30%) Partner with Project Executives and Principals to define project scopes, system approaches, and fees for proposals. Coordinate closely with Project Managers, architects, and other disciplines to ensure mechanical systems are fully integrated into the overall design. Represent ColeBreit Engineering in technical discussions and meetings as the mechanical discipline lead, demonstrating strong communication and professionalism. Provide clear, proactive technical leadership that supports successful project delivery and reinforces confidence in the firm's technical capabilities. Participate in project presentations and interviews as needed to support business development. Identify and recommend process improvements to enhance client experience and project efficiency. Talent Development and Leadership (~20%) Mentor and provide technical guidance to junior engineers and designers; conduct design reviews and share lessons learned. Contribute to staff development by supporting training initiatives and encouraging continuous learning. Participate in the technical evaluation of potential hires when requested. Monitor workloads/discpline budgets within assigned projects and communicate resource needs or constraints to Project Executives or Project Managers. Promote ColeBreit's “Team First” value by contributing to a collaborative, supportive, and accountable culture. Business Development Support proposal preparation by contributing technical input, scope definitions, and fee justifications. Maintain a presence in the AEC community through active engagement in industry organizations and events (e.g., AIA, ASHRAE). Provide technical presentations internally and externally to build thought leadership and visibility. Supervisory Responsibility This position may include the responsibility of supervising other team members, as assigned. Work Environment and Travel This role operates in a professional office environment with regular use of computers and related equipment. Local and regional travel (within 100 miles) is expected for project meetings and site visits. Occasional overnight travel may be required based on project needs. Hybrid work flexibility is available depending on project requirements and team coordination needs. Required Education and Experience Bachelor's Degree in Mechanical Engineering or related field required. Professional Engineer (PE) license in Mechanical Engineering, with registration in California or Oregon-or ability to obtain within 90 days-required. 8+ years of progressive MEP design experience, including HVAC and plumbing systems for commercial, residential, healthcare, or institutional projects. 2+ years in a leadership capacity (discipline lead, project management, or EOR role) demonstrating technical and team leadership. Advanced proficiency in Autodesk Revit and AutoCAD required. Strong technical writing and verbal communication skills; ability to present information clearly to diverse audiences. Experience with load simulation software (EnergyPro, Trane TRACE, or Carrier HAP) preferred. Working knowledge of Bluebeam and California Building Code compliance highly preferred. Active involvement in professional organizations (ASHRAE or equivalent) preferred. Competencies and Attributes Technical Expertise - Demonstrates advanced command of mechanical and plumbing systems, serving as the firm's go-to technical resource. Leadership & Mentorship - Leads by example, developing junior staff and fostering collaboration across teams. Accountability - Takes full ownership of assigned projects and deliverables. Client Focus - Builds strong relationships through reliability, communication, and solution-oriented thinking. Adaptability - Navigates ambiguity and evolving processes with professionalism and composure. Growth Mindset - Pursues ongoing learning and contributes to innovation within the discipline. Team Orientation - Embodies ColeBreit's “No Jerks Allowed” culture, prioritizing collaboration and mutual respect. Core Values Alignment Team First - Want to Grow - Driven to Perform. ColeBreit Engineering fosters a people-first culture that values collaboration, integrity, and continuous improvement. Our team members are accountable, approachable, and committed to delivering technical excellence and meaningful client partnerships. Other Duties This job description is intended to describe the general nature and level of work being performed. It is not an exhaustive list of all duties and responsibilities. ColeBreit Engineering reserves the right to amend duties or responsibilities as business needs evolve.

Wages range from $19.50 to $21.50 per hour Do you enjoy investigation and problem solving? Are you interested in natural resources and manufacturing? This is a fast-paced position providing engineering solutions to environment challenges. Qualified Engineers/Scientists help manage the Company's manufacturing facilities' stormwater compliance programs in California, Oregon, and Washington. Duties include, but are not limited to: * Assist in development of stormwater maintenance plan by: * Develop list of stormwater components * Review manufacturer manuals and catalogue relevant specifications * List component maintenance frequencies * Prepare standard operating procedures for maintenance tasks * Develop work orders for equipment maintenance * Coordinate with team to update drawings and stormwater plans Qualifications * College-level course work in engineering or natural science * Knowledge of database design desirable * Willing to learn and operate in database system * Ability to work with code a plus * Knowledgeable with spreadsheets * Excellent communication skills * Excellent critical thinking and writing skills * Thorough and organized Base Locations: Shasta Lake, California, Eugene, Oregon or Shelton, Washington Compensation includes competitive hourly wage and housing allowance for qualifying individuals. How to Apply Apply online at: spi-ind.com/internships Applicants must provide a cover letter and resume when submitting application. Applications Close: January 16th 2026 Interviews will be ongoing as applications are received. Position may be filled prior to deadline. Employment Period: SUMMER 2026 (flexible start & end dates) Celebrate our 300th million seedling planted with us! spi-ind.com/OurForests/ThreeHundredMillion Sierra Pacific is an (EOE) Equal Opportunity Employer, including those with a disability and veterans. About Our Company Sierra Pacific Industries is a fourth-generation family-owned company based in Northern California that started in 1949 and has grown to be one of the largest lumber and millwork producers in the U.S., employing around 6,500 crew members. Sierra Pacific continues to be a company where its employees are proud to work at state-of-the-art facilities and others strive to become part of the team. We own and sustainably manage more than 2.4 million acres of timberland in California, Oregon, and Washington. Our forests are sustainably managed under a 100-year plan by Registered Professional Foresters, Wildlife Biologists, Botanists, and other professionals. We are growing forests for our future, planting over 6 million new trees every year. In Spring 2024, we planted our 300 millionth seedling on our timberlands. This milestone was decades in the making, reflecting our commitment to sustainable forest management and ensuring we have forests not just for today, but for generations to come. Sierra Pacific effectively uses nearly 100% of every piece of wood we bring to our facilities. In fact, any small amount that isn't turned into hand-crafted doors and windows, millwork, lumber, or landscaping material is actually converted into electricity in our eight biomass-fueled power plants. We are proud that all Sierra Pacific facilities follow our drug-free and tobacco-free policies. As part of our safety in the workplace policy, an offer of employment is subject to a negative drug screen result. We use E-verify to verify the social security number and work authorization of all newly hired employees. Sierra Pacific is an (EOE) Equal Opportunity Employer, including those with a disability and veterans. At Sierra Pacific Industries, we understand our greatest strength is the people who choose to build a career with us. What does it mean to be part of the Sierra Pacific family? It means you are a valued team member and part of a growing, fourth-generation family-owned, forest products company built on hard work, innovation, and wise investments. With around 6,500 crew members in over 30 states, Sierra Pacific offers many opportunities for personal and professional growth; from entry-level to skilled trades, from truck drivers to sales managers, from foresters to engineers - for everyone! We invite you to learn more about our history, our 2.4 million acres of forestlands, and our state-of-the-art wood product and window manufacturing facilities at ************************ As part of our safety in the workplace policy, an offer of employment is subject to a negative drug screen result. We are also proud that all Sierra Pacific facilities follow our tobacco-free policy. Sierra Pacific adheres to E-verify to verify the social security number of all newly hired employees. Sierra Pacific is an (EOE) Equal Opportunity Employer, including those with a disability and veterans. If you are an individual with a disability and need accommodation to complete the application process, please call ************ or write to Sierra Pacific Industries at PO Box 496011, Redding, CA 96049.

As a 100% employee-owned contractor, when you work at Sundt, you're not just hiring on at a company, you're joining a culture. Because everyone at Sundt is part owner, you'll join a team of people who are deeply invested in their work. From apprentices to managers, we're passionate about the details and deliberate in everything we do. At Sundt we focus on building long-term prosperity for our clients, communities and employee-owners. We offer competitive pay, industry-leading benefits including a 401k and employee stock ownership plan, incentive programs for craft and administrative employees as well as training that focuses on your personal and professional growth. We're driven by skill, grit and purpose. Join us as we strive to be the most skilled builder in America. Job Summary Sundt is looking for committed engineering (Civil, Structural, and Mechanical) and construction management students within accredited Universities/colleges. The internship will provide you with unique experiences on challenging projects throughout the US while providing you the opportunity to participate in several of the activities it takes to successfully build our projects. We're looking for the future leaders of our company and those who are inspired to go beyond the expected. Come internship with one of the best places to work, as voted on by our own employees and where our people make the difference. Key Responsibilities 1. Assisting with project record keeping, preparing shop drawings, and assisting with cost control records. 2. Assisting with report preparation, safety inspections, submittal logging and processing. 3. Assisting with surveying, testing, sample collection, drawing correction and filing. 4. Assisting with time keeping and cost control, inventory control, schedule checking, subcontractor monitoring. 5. Attending bid openings, conferences, etc.; taking notes, making records, completing forms. 6. Observing and reporting results of meeting and conducting site tours for visitors . 7. Preparing quantity take-offs, calling vendors and sub-contractors for proposals. 8. Working as a manual laborer, helper, clerk or technician assistant, etc. Minimum Job Requirements 1. A team player, ready and willing to take on whatever challenge is offered. 2. Currently enrolled in a four-year Construction Management or Engineering program. 3. Eager to learn, immensely curious, full of questions, and ready to get their hands dirty. 4. Prefer those who have interest in a construction career for a builder. 5. Proficient use of all Microsoft Office Suite programs. Note: Job Description is subject to change at any time and may include other duties as assigned. Physical Requirements 1. Ability to wear personal protective equipment is required (including but not limited to; steel toed shoes, gloves, safety glasses, hearing protection, hardhat, vest, etc.) 2. May reach above shoulder heights and below the waist on a frequent basis 3. May stoop, kneel, or bend, on an occasional basis 4. May use telephone, computer system, email, or other electronic devices on a limited basis to communicate with internal and external customers or vendors 5. Must be able to comply with all safety standards and procedures 6. Occasionally will climb stairs, ladders, etc. 7. Required to use hands to grasp, lift, handle, carry or feel objects on a frequent basis 8. Will interact with people frequently during a shift/work day 9. Will lift, push or pull objects on an occasional basis 10. Will sit, stand or walk short distances for up to the entire duration of a shift/work day. Safety Level Safety-Sensitive Note: Jobs with the Safety-Sensitive designation are those that include tasks or duties that the employer reasonably believes could affect the safety and health of the employee performing the task or others such as operating a vehicle, operating equipment, operating machinery or power tools, repairing/maintaining the operation of any vehicle/equipment, the handling/disposal/transport of hazardous materials, or the handling/treatment/disposal of potentially flammable/combustible materials. Equal Opportunity Employer Statement: Sundt is committed to the equal treatment of all employees, and/or applicants for employment, and prohibits discrimination based on race, religion, sex (including pregnancy), sexual orientation, gender identity, color, age, disability, national origin, covered veteran status, genetic information; or any other classification protected by applicable Federal, state, or local laws. Benefit list: Market Competitive Salary (paid weekly) Bonus Eligibility based on company, group, and individual performance Employee Stock Ownership Plan & 401K Industry Leading Health Coverage Starting Your First Day Flexible Time Off (FTO) Medical, Health Savings, and Wellness credits Flexible Spending Accounts Employee Assistance Program Workplace Wellness Programs Mental Health Program Life and Disability Insurance Employee-Owner Perks Educational Assistance Sundt Foundation - Charitable Employee-Owner's program

Slayden Constructors Inc. (SCI), a wholly owned subsidiary of MWH Constructors, Inc. (MWH), is currently seeking a construction-focused project intern to join our Estacada Wastewater Treatment project in Estacada, Oregon. Slayden Constructors is a leader in the civil construction industry in the Pacific Northwest, focused on water and wastewater infrastructure. Over the last 40 years, we have ingrained our reputation with our clients on successful projects, positively impacting local communities. Grow your career with a team that is committed to delivering quality projects timely and safely, while supporting our guiding principles: People Matter, Team Unity, Solutions Driven, and Forward Focused. Essential Functions Assist with project controls, change orders, RFI s, and other construction administration duties. Prepare look-ahead schedules with information from subcontractors. Assist in the generation of various reports, such as submittal and RFI logs, and with document control. Process Submittals and RFIs. Update working drawings with RFIs and Changes. Keep this set up to date to ensure the team is working with the most current information. Perform simple calculations. Provide technical support for the construction effort. Contact vendors for information. Comply with company policies and procedures. Work in a manner to ensure your personal safety and that of fellow employees by following company health and safety guidelines and policies. Basic Qualifications In progress toward earning a Bachelor's degree in Construction Management, Mechanical Engineering, Civil Engineering, or a related degree. Interest in a career in heavy construction. Experienced with the complete Microsoft Office Suite, excellent writing and communications skills. Excellent written and oral communication skills. Strong interpersonal abilities for working in diverse team environments with staff, clients, and stakeholders. Experience with/aptitude for construction and/or mechanical processes. Preferred Qualifications Prior internship experience in the heavy construction industry. Compenstation Project mobility is offered within a defined home-to-project range. $23.00 $26.00 per hour, depending on prior internship experience in your field. Please note that all positions require pre-employment screening, including drug and background checks, as a condition of employment. Equal Opportunity Employer, including disabled and veterans. #LI-AS1 #LI-ONSITE