Process development technician entry level jobs

Description: OBJECTIVE: The Extrusion Process Technician is responsible for prepping and operating machinery used to produce plastic profile products in a manufacturing environment. Key functions include determining the proper forms, lengths, and diameters for production, prepping extruding machinery, sorting materials, and operating equipment. Technicians must also install, connect, test, and adjust equipment as needed. ESSENTIAL FUNCTIONS: *Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.* Ability to follow instructions and production requirements; attention to detail; concentration. Capable of multitasking in a fast-paced environment. Able to act quickly when a problem arises; solve problems and make decisions as needed. The capacity to identify opportunities for improvement and make constructive suggestions for change. Follow all safety and work rules. Read and comprehend written process procedures, shadowgraphs, S.P.C. instructions, and problem-solving guidelines to improve processes and meet production requirements. Clean tooling and verify equipment is working correctly. Checking parts for product quality and ensuring the process is compliant with occupational regulations. Train extrusion support personnel in quality and job requirements. Accurately assemble, disassemble, clean, and polish tooling. Safely handle hot tooling required in machine set-ups, tear-downs, and normal machine operations. Evaluate shadowgraphs to recommend tooling improvements to meet profile specifications. Record and maintain accurate production records, which include input of daily production rates/hours and input. Operate and interpret manual and computerized gauges to verify that quality products are being produced. Notify supervision of non-conforming conditions. Must be continuous and regular in attendance. Safely operate a forklift when necessary. Run extrusion processes to standardize scrap rates/start-up, shutdown, and set-up time frames and procedures. Identify labeling products using a bar code system. Evaluate production tooling to recommend repair or improvement. Assist in the training of extrusion production technician trainees. Must be flexible to work any shift to assist in training and maintaining customers' expectations. Aid Project Engineer in new product development. Participate in team meetings and team development areas. Interface with internal customers regularly. Any improvements that support the well-being and advancement of MCI, its employees, and the community. Ability to work overtime as needed on short notice. Effectively achieves results that meet business and individual objectives. Perform other job-related duties and responsibilities that may be assigned. Ability to exercise good judgment and professionalism at all times. Ability to coordinate and assist with day-to-day production functions. Basic computer skills and experience, including but not limited to Microsoft Office, Microsoft Outlook, and additional ERP systems experience a plus. SUPERVISORY RESPONSIBILITY: This position has no supervisory responsibilities. WORK ENVIRONMENT: This job operates in a manufacturing environment. While performing the duties of this job, the employee may be exposed to fumes or airborne particles, moving mechanical parts, and vibration. The noise level in the manufacturing environment and job sites can be loud. The manufacturing work environment is not temperature-controlled controlled and the employee may be exposed to high-heat work conditions. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear, stand, walk, use hands to finger, handle, or feel: reach with hands and arms, and stoop, kneel, crouch, or crawl. The employee must occasionally sit, climb or balance, lift, push, pull, and/or move up to 100 pounds. The employee will routinely lift, push, pull, and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. TRAVEL: No travel is expected for this position. EDUCATION AND EXPERIENCE: High School Diploma/General Education Diploma (GED), or equivalent combination of education, training, and experience. Minimum of 1-3 years of experience in an ISO manufacturing environment; and/or demonstrated knowledge, skills, and abilities to perform the above-mentioned essential functions. Minimum of 1-3 years of experience working with and operating manufacturing machinery (set-up, tear-down, and troubleshooting) is a plus. FUNCTIONAL/TECHNICAL KNOWLEDGE, SKILLS & ABILITY: Strong written, verbal, and interpersonal communications skills, including the ability to listen attentively, communicate information clearly and effectively, and the ability to work directly and indirectly with other staff members. Act as a member of a team OTHER DUTIES: Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. EEO/DFWP/AAP STATEMENT: Meteor Creative North America is an equal opportunity (EOE) /drug-free workplace (DFWP) employer. The physical demands and environmental characteristics described are representative of those that must be met by an employee to successfully perform the essential functions of this job. Requirements:

What Makes a Honda, is Who makes a Honda Honda has a clear vision for the future, and it's a joyful one. We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals. At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success. We strive to be a company that serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.” We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team. If your goals and values align with Honda's, we want you to join our team to Bring the Future! Job Purpose The Supply Chain Management Operations Department is responsible for the oversight, standardization and technical leadership of the internal material handling operations at the Honda automobile powertrain and final assembly sites across North America. The Process Engineer position is responsible for engineering and executing the internal logistics flow of parts through a specific Honda plant to the production line. This position will be responsible for supporting the development and design of internal material delivery processes, working and communicating with stakeholders, and developing solutions through process analysis, time studies, work balancing, etc. Key Accountabilities Support development, documentation and implementation of processes utilizing engineering tools (Maynard Operation Sequence Technique (MOST), AutoCAD, Visio, QMF, Excel, etc.) required to achieve project and business plan targets. Areas of responsibility include manpower planning, process and vanning layout design, expectation sheet development and New Model packaging evaluations. Identify and support implementation of process improvements in support of business plan objectives and general cost reduction. Execute tasks as prescribed by and maintain Specified Action Plans (SAP). Create SAP's for projects with limited complexity (less than $100,000). Maintain assigned process design through daily maintenance, process audits, and continuous improvement. Ensure all process related documentation is completed in the standard format, stored in the proper location, and communicated to all of the appropriate parties. Assist investigation of production related issues through situation analysis, using established problem-solving techniques and support the implementation of countermeasures. Qualifications/Experience/Skills Minimum Educational Qualifications: Engineering related degree or other relevant work experience Minimum Experience: 0-2 years of experience in engineering role Other Job-Specific Skills: Problem solving and decision-making skills. Proficient verbal and written communication skills. Ability to prioritize tasks and projects. Solid organizational skills. Proficiency with Microsoft Office (Excel, PowerPoint, Outlook). Understanding of warehouse management functions and support of manufacturing operation. Working Conditions Open office environment. Substantial overtime hours required during project / new model implementations. Alternate shift times may be required during project / new model implementations. What differentiates Honda and make us an employer of choice? Total Rewards: Competitive Base Salary (pay will be based on several variables that include, but not limited to geographic location, work experience, etc.) Paid Overtime Regional Bonus (when applicable) Industry-leading Benefit Plans (Medical, Dental, Vision, Rx) Paid time off, including vacation, holidays, shutdown Company Paid Short-Term and Long-Term Disability 401K Plan with company match + additional contribution Relocation assistance (if eligible) Career Growth: Advancement Opportunities Career Mobility Education Reimbursement for Continued Learning Training and Development programs Additional Offerings: Tuition Assistance & Student Loan Repayment Lifestyle Account Childcare Reimbursement Account Elder Care Support Wellbeing Program Community Service and Engagement Programs Product Programs Honda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.

A career at Resilience is more than just a job - it's an opportunity to change the future. Resilience is a technology-focused biomanufacturing company that's changing the way medicine is made. We're building a sustainable network of high-tech, end-to-end manufacturing solutions to better withstand disruptive events, serve scientific discovery, and reach those in need. For more information, please visit ****************** Job Summary The Quality Technician II, Aseptic Control (Day Shift) is responsible for autonomously performing tasks related to environmental monitoring to support regulatory requirements of a sterile manufacturing site. **This a Day Shift position working 6:30am - 6pm. 2 days on, 2 days off, 3 days on, 3 days off and the rotation starts over again. Position Responsibilities Perform routine sampling activities and associated data entry. Wear gowning, sterile garments, and PPE (Personal Protective Equipment) as required by specific activities. Read and interpret diagrams, drawings, and other schematics. Prepare documentation of activities, actions, and results. Ensure proper documentation practices during job activities. Read SOPs (Standard Operating Procedures) and excerpts from technical documentation. Complete required training Perform visual inspections Use the Environmental Monitoring System to collect and analyze samples Guide others on SOPs, control documents, and/or other work instructions. Coordinate activities of support groups Ensure that others carry out laboratory duties in a manner consistent with cGMP Perform regular audits of SOPs and/or work instructions Perform routine sampling activities and associated data entry Wearing gowning, sterile garments, and PPE (Personal Protective Equipment) as required by specific activities Read and interpret diagrams, drawings, and other schematics Recommend and initiate activities to ensure area and equipment is maintained in a state of compliance Provide 24/7 "on-call" support to others Provide feedback on service and issues on a timely basis Minimum Qualifications Prior experience in a pharmaceutical production environment Must have the ability to effectively understand, read, write, communicate, and follow instructions in the English language Thorough attention to detail is required Must be capable of keeping accurate records and performing mathematical calculations Preferred Qualifications B.S. in biology or other related discipline Working knowledge of MODA, Microsoft applications Experience working in a LEAN manufacturing environment Knowledge of cGMPs and FDA policies/procedures The items described here are representative of those that must be met successfully to perform the essential functions of this job. Sponsorship or support for work authorization, including visas, is not available for this position. Resilience is an Equal Employment Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender perception or identity, national origin, age, marital status, protected veteran status, disability status, physical or mental disability, genetic information, or characteristic, or other non-job-related characteristics or other prohibited grounds specified in applicable federal, state, and local laws. Requests for reasonable accommodation can be made at any stage of the recruitment process. Resilience offers employees a robust total rewards program including an annual cash bonus program, a 401(k) plan with a generous company match and our benefits package which is thoughtfully designed to support our employees with great healthcare (including medical, dental and vision), family building benefits, life and disability insurance, flexible time off, paid holidays, other paid leaves of absence, tuition reimbursement and support for caregiving needs. Our target base pay hiring range for this position is $21.50 - $30.50 per hour. Actual base pay is dependent upon a number of factors, including but not limited to, the candidate's geographical location, relevant experience, qualifications, skills and knowledge. Excited about Resilience and the biomanufacturing revolution? We encourage you to apply and start a conversation with one of our recruiters.

A Fortune 100 client in the retail industry is seeking a Process Engineer to support their aseptic processes. Below is a breakdown of the daily responsibilities: - Serve as a key contributor in shaping Manufacturing's aseptic product strategy. - Develop comprehensive engineering and design plans for aseptic food products, including dairy, juices, blended items, viscous concentrates, and pastes. - Optimize, troubleshoot, and maintain aseptic manufacturing lines to improve product quality, operational productivity, and workplace safety. - Design conceptual process and packaging solutions to support both existing and new aseptic product initiatives. - Lead multiple projects simultaneously, managing resources, budgets, schedules, equipment, and materials. - Assess and recommend current and emerging equipment and technologies to enhance aseptic operations. - Conduct process analyses of existing technologies and systems to identify improvement opportunities. - Perform feasibility studies and cost-benefit analyses to support strategic decision-making. - Support the development, implementation, and continuous improvement of SQF Systems. - Must be able to work in environments containing ingredients or products with known food allergens. We are a company committed to creating diverse and inclusive environments where people can bring their full, authentic selves to work every day. We are an equal opportunity/affirmative action employer that believes everyone matters. Qualified candidates will receive consideration for employment regardless of their race, color, ethnicity, religion, sex (including pregnancy), sexual orientation, gender identity and expression, marital status, national origin, ancestry, genetic factors, age, disability, protected veteran status, military or uniformed service member status, or any other status or characteristic protected by applicable laws, regulations, and ordinances. If you need assistance and/or a reasonable accommodation due to a disability during the application or recruiting process, please send a request to ********************.To learn more about how we collect, keep, and process your private information, please review Insight Global's Workforce Privacy Policy: **************************************************** Skills and Requirements - Bachelor's degree in Engineering (chemical engineering preferred) - 4+ years Food & Beverage or pharmaceutical manufacturing - Aseptic (Sterile) processing or clean room experience within manufacturing - Certification in Aseptic Processes - Maximo experience - Capital project management experience >$1MM - Knowledge of other liquid food and beverage processing technologies including extended shelf-life (ESL), ultra clean and hot fill

Job Details Experienced OH Middlefield - Middlefield, OH $26.34 HourlyDescription PROCESS TECHNICIAN Job Purpose The purpose of the Process Technician role is to serve as the leading operator of manufacturing production equipment within a department and to serve as the backup for the supervisor. The Process Technician will know and understand the operation and process of all the machines within their department or operational area and will set up, troubleshoot, and help operate all equipment within that department or area. Key Responsibilities Set up, repair, and troubleshoot manufacturing equipment, ancillary equipment, and support equipment Understand the production process as it relates to Plastic Injection Molding, Thermoforming, and/or Plastic Extrusion Make required mold changes and process adjustments and complete color changes as required Monitor the automation of processes to ensure a quality production process Collect and inspect random shots from molding machines. Use inspection procedures, specifications, and blueprints to determine disposition of parts Responsible for processing product and/or perform to the specifications determined by the Quality and Development teams Troubleshoot equipment, molding processes and cycles, mechanical, pneumatic, electrical, and hydraulic issues and partner with maintenance as required Complete preventative maintenance requirements in coordination with the maintenance team Promote continuous quality improvement processes and implementing lean metrics Support all company policies and procedures Perform other administrative tasks and special projects as assigned Qualifications Qualifications and Experience High school diploma and/or GED equivalent preferred Previous manufacturing experience required Previous experience with Plastic Injection Molding, Thermoforming, and/or Plastic Extrusion Ability to work in a fast-paced environment Demonstrate the ability to critical think and problem solve with relation to mechanical and production challenges Ability to work in a team-oriented work environment Must adhere to all safety guidelines and foster a safe work culture Must be able to accurately complete paperwork as needed

Quality Assurance Cincinnati, OH, US + Added - 03/10/2025 Apply for Job Our client, a global leader in chemical manufacturing, is looking to hire a QC Lab Assistant to assist with their high volume of work! The position is titled QC Lab Assistant but the function, while very important, is basic, repetitive and requires minimal training. Looking for someone with strong attention to detail! **Hours** : 2nd shift 2:30p-11p M-f **Pay** : $22.50/hr **Location** : Springboro/Franklin, OH **Contract** : ~2 months + Placing stickers/labels on product to indicate approval/readiness. + Green stickering takes approximately 2-3 hours per day in Springboro and 4-5 hours per day in Franklin. + The task would involve being in the manufacturing area, standing and moving about throughout the day. **Qualifications** : + Experience working in a manufacturing environment. Quality experience a plus! + Attention to detail; clear communication along with excellent attendance and punctuality + High school diploma **_This job description is a complete list of all desired skills, but not all are required. We strongly encourage candidates who have some of the skills to apply. We look forward to a conversation to learn more about you!_** INDBH We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law.

Fantastic Opportunity to Be Part of a Great Team! Blair Rubber Co. is the manufacturer of and worldwide supplier of roofing membranes and ancillary products, and rubber linings which protect vessels and equipment from corrosion and abrasion in the harshest chemical environments. We deliver the shortest lead times in the industry and utilize the highest equipment technology to support our process. Job Description Mechanical Process Engineer Co-Op Location: Seville, OH Type: Full Time Co-Op / Paid Intern Department: Plant Operations **Must be local to Ohio State** Relocation Assistance not available Blair Rubber Co. is the manufacturer of and worldwide supplier of roofing membranes and ancillary products, and rubber linings which protect vessels and equipment from corrosion and abrasion in the harshest chemical environments. We deliver the shortest lead times in the industry and utilize the highest equipment technology to support our process. Check out our introduction video here: ********************************************* WHAT'S IN IT FOR YOU? Competitive Wage ($23.00-$25.00 per Hour) ands-on experience with an industry leader in manufacturing, contributing to the production of high-quality roofing materials. Work with a company committed to eco-friendly practices and sustainable production methods. Exposure to different roles or departments to help you clarify your career interests and path. Potential for future Internship/Co-Op placements or full-time roles upon graduation. WHEN YOU JOIN US, YOU WILL BE; Perform engineering projects utilizing sound design principles Works with operations team to identify and implement safety and production CI initiatives. Create work instructions and perform job hazard analyses for areas on the production floor. Participate in safety improvements for all equipment and continuous quality improvements for processes Creates layouts and process diagrams to support standardization and CI. Identify hazards by analyzing jobs and their associated tasks. Assist in ensuring the site complies with corporate process standards. This includes preparation for the annual corporate process audit and follow-up on all issues raised during the audit. Identifies potential areas of product improvement; recommends and assists with the development of appropriate solutions. Working in an office environment with limited exposure to the production floor where various rubber, adhesives, grease, oils, carbon black, steam and industrial manufacturing machines are used. Perform other duties as assigned OUR IDEAL CANDIDATE; Sophomore, Junior, Senior, specializing in Industrial, Mechanical, or Electrical Engineering program. Working knowledge of Microsoft Office products Excellent verbal and written communication skills Excellent interpersonal and customer service skills Excellent organizational skills and attention to detail Excellent time management skills with a proven ability to meet deadlines Ability to analyze and solve problems Take initiative to identify and resolve problems Capable of learning ERP software and other ancillary software General computer knowledge Personal Protective Equipment (PPE), safety and values focused Leading by example with safety and safe work habits Prolonged periods working on feet, using tools, and performing repetitive actions that entail frequent bending and stooping Good hand dexterity Comprehend information and ideas presented verbally or in writing Use effective time management to ensure that tasks and projects are completed within agreed time limits Produce a tangible, positive impact Work effectively as part of a team or as an individual Achieve consistently high results Demonstrate high standards of professional conduct WORK AUTHORIZATIONS AND TRAVEL; Must be authorized to work in the United States Potential travel requirements Benefits of Employment: Blair Rubber Company recognizes that its success is due to the strength of its employees. A primary goal of Blair Rubber Company is to promote individual employee's sense of accomplishment and contribution so that employees enjoy their association with Blair Rubber Company. The Company invests in its employees so that they are the most knowledgeable in the industry, and undertakes great efforts to nurture loyalty to, and teamwork at, Blair Rubber Company. We are pleased to offer competitive compensation, health care, a progressive and challenging workplace and a commitment to teamwork and integrity. Diversity and Equal Opportunity Employment: Blair Rubber Company is an equal opportunity employer. We are committed to diversity and inclusion and are pleased to consider all qualified applicants for employment without consideration to race, religion, creed, color, national origin, age, gender, sexual orientation, marital status, veteran status or disability. Blair Rubber Company encourages and welcome applications from people with disabilities. Accommodations are available on request for candidates taking part in all aspects of the selection process.

Job DescriptionDescription: Overview: Quality Technician position is responsible for inspecting products by performing the following duties. Essential Duties and Responsibilities. Ability to read manufacturing drawings Performs hourly checks and records information. Verifies that the tags on the unit match the pieces being inspected. Obtain the Inspection Data Sheets necessary for daily inspection from the Quality supervisor. Verifies MWF Part Print requirements are entered on the daily paperwork used for line checks. Prepares for Forge and Extrusion line hourly checks. Verifies that calibrations are current on all gaging used to perform checks. Prepares Inspection through plex (not everyone uses Plex). Identify and report non-conformances to the appropriate personnel Performs in-process inspection and ensuring that proper checks are being performed in timely fashion Performs tests on Magnetic Particle Unit Reports any Quality or functional problem to the shift supervisor immediately. Shall be able to read measuring devices such as calipers, micrometers, indicators, height gauges, etc… Uses any or all of the equipment listed to perform the inspection functions. In performing dimensional checks watches for obvious visual defects such as cracks, pinches, rings, part number error, or heat code error. Places a nonconforming tag and moves discrepant parts to the designated hold area for disposition. May be required to prepare parts for lab samples. Obtains and prepares material for initial sample requirements, and packages material properly for shipment (PPAP's). Cleans work area, machines, tools, and equipment. Follows all safety and plant rules and regulations. Performs other duties as assigned. Supervisory Responsibilities: This job has no supervisory responsibilities. Education and/or Experience: · High school diploma or general education degree (GED) preferred. · Vocational school or apprenticeship is a plus. · One to three months' related experience and/or training preferred. Key Competencies Communication Skills: Ability to read and write simple instructions, short correspondence, and memos. Ability to effectively report data and job specific information as needed. Mathematical Skills: Ability to perform basic mathematics understanding decimal functions. Computer Skills: Ability to navigate basic technology including but not limited to use of digital self-service platforms, time clocks, and other systems where applicable. Additional Preferred Skills and Experience: · Must have good mechanical aptitude. · Must be able to learn all inspection equipment necessary to perform duties. Analam Length Gage Radius gages Micrometers Verniers (hand and height) Sonoflux Unit and all related test equipment De-mag Unit Inspection Station Dial Indicators Hand length gages. Grinders (hand and floor mount) Hammer and Stamps Operate saw for lab sample preparations. Brinell Test Physical Demands: Stand, walk, push, pull, squat, bend, and reach during shifts. Use carts, dollies, cranes, and jacks to transport material if needed. Must be able to regularly lift and or move up to 40 lbs. Climbing ladders and stairs to reach work at potential heights of 30ft or more. Navigate narrow walkways, confined spaces, and overhead mezzanines. Tolerate potentially extreme temperature fluctuations impacted by weather and machinery. Acclimate to high noise and vibration levels in workspaces. Wear and adhere to all PPE guidelines including hard hats, protective eye wear, ear plugs, and approved footwear with metatarsal and steel toe safeguards What We Offer: · Full-Time employment · Benefits Day 1 (Medical, Dental, Vision, STD, AD & D Life insurance ) bolded benefits are company paid. · 401k Company Match · Competitive salary packages · Generous paid time off and vacation policies · Ongoing professional development opportunities and training programs Work Environment: The Quality Technician will work within our facility interacting with historic machinery which often involves proximity to heat, noise, debris, conveyance systems and other potentially dangerous equipment. The Quality Technician will encounter high levels of floor and overhead traffic due to material transportation throughout the facility which can cause high levels of vibration and airborne disturbances. There are areas of paved and unpaved walkway, active shipping lanes and occasionally standing water to be cautious of. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, protected veteran status or disability. Requirements:

Aero Engine Process Development Engineer Makino is a world leader in metal-cutting and machining technology. As a leader in advanced manufacturing machine tool technology, Makino enables its customers to realize the highest level of quality with the fastest time to market. When companies make the parts that matter for automotive, aerospace, medical, die-mold and other industries worldwide, they make them with Makino. About this Position: Level I Aero Engine Process Development Engineer plays a key role in supporting Makino's pre- and post-sales efforts related to aerospace engine component manufacturing. In this hands-on role, you'll gain experience evaluating customer manufacturing needs, developing process plans, designing tooling and fixtures, and creating NC programs using Siemens NX. You'll also simulate programs in CGTECH Vericut and execute them on Makino's advanced milling and grinding platforms, utilizing 3+2 and simultaneous 5-axis machining techniques. This position is based at our Corporate Office in Mason, OH, and involves a mix of computer-based and shop floor responsibilities. Travel is project-dependent and may be required up to 50% of the time. Regular on-site presence at the office or customer locations is expected. Education & Experience • Bachelor's degree in Aerospace Engineering, Mechanical Engineering, or a related technical field, plus a minimum of 2 years of relevant hands-on experience. Individuals who have completed a technical certificate program in machining, manufacturing technology, or precision tooling will also be considered with equivalent experience. • Candidates without a degree may also be considered with 5+ years of relevant hands-on experience Relevant experience may include hands-on roles such as machinist, tool maker, or CNC technician, particularly in job shops, machine shops, or precision manufacturing environments, with exposure to aerospace components, turbine engine hardware, tight-tolerance machining, or high-mix, low-volume part setup. What you need to be successful in the role: Ability to present a professional image, while demonstrating excellent communication and customer relation skills. Positive attitude, open minded team player, but capable of thinking “ outside the box ”. Ability to multi-task, are self-motivated and have the desire to work in a manufacturing environment. Operational knowledge of Multi-Axis CNC Machining Centers, with a working knowledge of Fanuc and/or Makino controls. Computer literate to support industry standard software applications. Skills you will develop in this position: Detailed knowledge of CNC part programming, with an understanding of macro programming. A thorough understanding of solid modeling and 3,4, and 5 axis CAM programming utilizing Siemens NX software. Develop milling and grinding part processing solutions for exotic metals, and high temperature alloys. Investigate new techniques and tooling, in anticipation of customer needs, develop new solutions when the existent technology is inadequate. Strong technical analysis and troubleshooting skills, with the ability to analyze and improve machining processes including but not limited to fixturing issues, CNC program and/or parameter and tooling issues. Your responsibilities: Execute Customer specific projects, which will require that you design tooling, design dressing rolls, design fixture solutions, create NC programs, etc., at either Makino Mason, or the customers facility. Perform test cuts and machine demonstrations for Aero Engine components, including virtual and digital representations. Documentation of project results and customer specific processing. Perform post-sale startup assistance and training for customers, at their facility. We believe that the interests of our company and people are inseparable, and we are committed to developing a diverse team of creative and independent professionals. Employees enjoy a stable work environment from a company with years of success and growth in the machine tool industry. Makino offers competitive pay, generous benefits, and ongoing training. Makino is an Equal Opportunity Employer, including Veterans and Individuals with Disabilities

Job Description Maverick Molding Co Maverick Molding offers a diverse line of high-temperature resins, polymer composites and Superimide-branded products designed and manufactured to withstand the most demanding temperatures. Maverick Molding is vertically integrated with the material capabilities, processes and equipment to conform to stringent OEM and industry requirements. Pacific Piston Ring Co., Inc. Pacific Piston Ring Co., Inc. has offered a variety of Piston Rings primarily to the aerospace market and is in the process of relocating from California to Blue Ash, Ohio so we are growing our team to accommodate the growth. Both companies will be located at 11379 Grooms Rd. Blue Ash, OH 45242. Maverick Molding Co and Pacific Piston Ring Co., Inc. believe that our employees are important to our success and strive to provide a company culture that is positive and inviting. Everyone matters and we value how people are treated. We encourage Diversity, Equity, and Inclusion. Job Summary The Quality Technician position is responsible for performing all duties necessary to inspect and verify materials and products meet the applicable requirements and to record all results and notify appropriate personnel of any discrepancies. This can include performing measurement system analysis, dimensional studies, auditing, root cause and corrective actions, first article inspections, receiving inspection or becoming a designated supplier quality representative. Fulltime 1st Shift - OT as required. Responsibilities: Be able to read and follow written instructions. Proficient in the use of handheld measurement equipment such as Calipers, Micrometers, Indicators, etc. Be able to read simple engineering drawings and interpret specifications. Responsible for timely completion of assigned jobs Comply with safety and OSHA regulations and maintain clean and orderly work areas. Ethical Conduct Communication Proficiency Results Driven self-starter. Ability to work within a team and support the site. Previous experience working in a manufacturing inspection environment is preferred. High School Diploma / GED required. Must be computer literate and be able to use Microsoft Office products Excel, Word, Outlook Must possess 20/25 or better near vision with or without corrective lenses and be able to pass a color vision test. Must pass a Drug Test and background check prior to hiring. Competencies Ethical Conduct Communication Proficiency Results Driven self-starter. Ability to work within a team and support the site. Previous experience working in a manufacturing inspection environment is preferred. High School Diploma / GED required. Must be computer literate and be able to use Microsoft Office products Excel, Word, Outlook Must possess 20/25 or better near vision with or without corrective lenses and be able to pass a color vision test. Must pass a Drug Test and background check prior to hiring. Requirements Previous experience working in a manufacturing inspection environment is preferred. High School Diploma / GED required. Must be computer literate and be able to use Microsoft Office products Excel, Word, Outlook Must possess 20/25 or better near vision with or without corrective lenses and be able to pass a color vision test. Must pass a Drug Test and background check prior to hiring. Benefits 401(K) Retirement Plan with Company Match Medical, Dental, Vision - Complete Health Care Package Company paid short-term, long-term and life insurance. 10 Paid Holidays Vacation and Sick Time Safety shoe and eye glass allowance Maverick Molding Co and Pacific Piston Ring Co., Inc. are Equal Opportunity Employers committed to Diversity/M/F/D/V #hc178591

Fantastic Opportunity to Be Part of a Great Team! Blair Rubber Co. is the manufacturer of and worldwide supplier of roofing membranes and ancillary products, and rubber linings which protect vessels and equipment from corrosion and abrasion in the harshest chemical environments. We deliver the shortest lead times in the industry and utilize the highest equipment technology to support our process. Job Description Chemical Process Engineer Co-Op Location: Seville, OH Type: Full Time Co-Op / Paid Intern Department: Plant Operations **Must be local to Ohio State** Relocation Assistance not available Blair Rubber Co. is the manufacturer of and worldwide supplier of roofing membranes and ancillary products, and rubber linings which protect vessels and equipment from corrosion and abrasion in the harshest chemical environments. We deliver the shortest lead times in the industry and utilize the highest equipment technology to support our process. Check out our introduction video here: ********************************************* WHAT'S IN IT FOR YOU? Competitive Wage ($23.00-$25.00 per Hour) Hands-on experience with an industry leader in manufacturing, contributing to the production of high-quality roofing materials. Work with a company committed to eco-friendly practices and sustainable production methods. Exposure to different roles or departments to help you clarify your career interests and path. Potential for future Internship/Co-Op placements or full-time roles upon graduation. WHEN YOU JOIN US, YOU WILL BE; Perform engineering projects utilizing sound design principles Works with operations team to identify and implement safety and production CI initiatives. Create work instructions and perform job hazard analyses for areas on the production floor. Participate in safety improvements for all equipment and continuous quality improvements for processes Creates layouts and process diagrams to support standardization and CI. Identify hazards by analyzing jobs and their associated tasks. Assist in ensuring the site complies with corporate process standards. This includes preparation for the annual corporate process audit and follow-up on all issues raised during the audit. Identifies potential areas of product improvement; recommends and assists with the development of appropriate solutions. Working in an office environment with limited exposure to the production floor where various rubber, adhesives, grease, oils, carbon black, steam and industrial manufacturing machines are used. Perform other duties as assigned OUR IDEAL CANDIDATE; Sophomore, Junior, Senior, specializing in Chemical Engineering program. Working knowledge of Microsoft Office products Excellent verbal and written communication skills Excellent interpersonal and customer service skills Excellent organizational skills and attention to detail Excellent time management skills with a proven ability to meet deadlines Ability to analyze and solve problems Take initiative to identify and resolve problems Capable of learning ERP software and other ancillary software General computer knowledge Personal Protective Equipment (PPE), safety and values focused Leading by example with safety and safe work habits Prolonged periods working on feet, using tools, and performing repetitive actions that entail frequent bending and stooping Good hand dexterity Comprehend information and ideas presented verbally or in writing Use effective time management to ensure that tasks and projects are completed within agreed time limits Produce a tangible, positive impact Work effectively as part of a team or as an individual Achieve consistently high results Demonstrate high standards of professional conduct WORK AUTHORIZATIONS AND TRAVEL; Must be authorized to work in the United States Potential travel requirements Benefits of Employment: Blair Rubber Company recognizes that its success is due to the strength of its employees. A primary goal of Blair Rubber Company is to promote individual employee's sense of accomplishment and contribution so that employees enjoy their association with Blair Rubber Company. The Company invests in its employees so that they are the most knowledgeable in the industry, and undertakes great efforts to nurture loyalty to, and teamwork at, Blair Rubber Company. We are pleased to offer competitive compensation, health care, a progressive and challenging workplace and a commitment to teamwork and integrity. Diversity and Equal Opportunity Employment: Blair Rubber Company is an equal opportunity employer. We are committed to diversity and inclusion and are pleased to consider all qualified applicants for employment without consideration to race, religion, creed, color, national origin, age, gender, sexual orientation, marital status, veteran status or disability. Blair Rubber Company encourages and welcome applications from people with disabilities. Accommodations are available on request for candidates taking part in all aspects of the selection process.

Make a Difference in YOUR Career! Our vision is both simple and ambitious: to put our drinks on every table. We are the world's largest bottler for retailers and A-brands. Our products are distributed worldwide from our production sites in Europe and North America. Although our own branding may not appear on the labels of the beverages we produce, there is a good chance you are reading this while sipping one of our drinks. Our ambition is to continually improve and it's what keeps us at the top of our game. We are solutions-based. We are innovative. We seek out new challenges and conquer them. This is our company ethos, but it's our people's too: Refresco is at the cutting edge of a fast-moving industry because we have passionate people pushing the boundaries of what's best. Stop and think: how would YOU put our drinks on every table? Starting pay: $20/hr Essential functions * QA Techs are responsible for ensuring adherence to food quality and food safety rules and regulations as required by the quality standards and/or Safe Quality Food requirements * Ensure all products being run conform to the product specifications as outlined in SAP by conducting analysis on raw deliveries, syrup batches, and treated water * Conduct chemical and physical analysis on raw and intermediate processing materials including packaging materials and determine status of materials (acceptable or not) * Maintain accurate, legible records of all tests and retests performed * Work closely with all departments to improve quality, increase efficiencies, increase yields, and eliminate out of specification or damaged product * Evaluate finished products against current standards by performing audits to monitor all aspects of finished product and packaging integrity * Check process control parameters to assure proper equipment application and operation is being maintained by performing secure seal, closure torque, and seaming checks. * Maintain laboratory cleanliness * Complete special projects and other reasonable duties as assigned by senior support Required Skills and Competencies * Strong computer skills * Proficient in Excel, Word, SAP, and PowerPoint * Strong analytical skills, problem solving skills, and results oriented * Organized, detail oriented, and adaptable to change Working Conditions: * Physical- Most if not all days in this position require continuous standing or walking along with a requirement to lift, handle, or carry material of moderate weight * Visual/ Sensory- This position requires regular need to give moderate attention with one or two senses at a time * Work environment- Nature of work and environment are repetitive however tasks may vary day to day * Mental Stress- There is pronounced pressure from deadlines, production quotas, and accuracy demands as well as similar stresses day to day. These descriptions are generalized and do not cover all responsibilities and expectations of this position. Other tasks may be assigned by senior support as needed. A Career with Refresco Refresco offers a competitive salary and comprehensive benefits, which include: * Medical/dental/vision insurance * Life insurance * 401(k) savings plan with company match * Paid holidays and vacation * Well-being benefits * Discount programs Join Refresco TODAY and enjoy a rewarding CAREER! Equal Opportunity Employer Refresco is an Equal Employment Opportunity/Affirmative Action employer. Refresco does not discriminate against qualified applicants or employees based on race, color, age, religion, sex, pregnancy, national origin, ancestry, age, physical or mental disability, veteran status, status in uniformed services, sexual orientation, gender identity, gender expression, marital status, genetic information, or any other status protected by law.

Make a Difference in YOUR Career! Our vision is both simple and ambitious: to put our drinks on every table. We are the world's largest bottler for retailers and A-brands. Our products are distributed worldwide from our production sites in Europe and North America. Although our own branding may not appear on the labels of the beverages we produce, there is a good chance you are reading this while sipping one of our drinks. Our ambition is to continually improve and it's what keeps us at the top of our game. We are solutions-based. We are innovative. We seek out new challenges and conquer them. This is our company ethos, but it's our people's too: Refresco is at the cutting edge of a fast-moving industry because we have passionate people pushing the boundaries of what's best. Stop and think: how would YOU put our drinks on every table? Starting pay: $20/hr Essential functions · QA Techs are responsible for ensuring adherence to food quality and food safety rules and regulations as required by the quality standards and/or Safe Quality Food requirements · Ensure all products being run conform to the product specifications as outlined in SAP by conducting analysis on raw deliveries, syrup batches, and treated water · Conduct chemical and physical analysis on raw and intermediate processing materials including packaging materials and determine status of materials (acceptable or not) · Maintain accurate, legible records of all tests and retests performed · Work closely with all departments to improve quality, increase efficiencies, increase yields, and eliminate out of specification or damaged product · Evaluate finished products against current standards by performing audits to monitor all aspects of finished product and packaging integrity · Check process control parameters to assure proper equipment application and operation is being maintained by performing secure seal, closure torque, and seaming checks. · Maintain laboratory cleanliness · Complete special projects and other reasonable duties as assigned by senior support Required Skills and Competencies · Strong computer skills · Proficient in Excel, Word, SAP, and PowerPoint · Strong analytical skills, problem solving skills, and results oriented · Organized, detail oriented, and adaptable to change Working Conditions: · Physical- Most if not all days in this position require continuous standing or walking along with a requirement to lift, handle, or carry material of moderate weight · Visual/ Sensory- This position requires regular need to give moderate attention with one or two senses at a time · Work environment- Nature of work and environment are repetitive however tasks may vary day to day · Mental Stress- There is pronounced pressure from deadlines, production quotas, and accuracy demands as well as similar stresses day to day. These descriptions are generalized and do not cover all responsibilities and expectations of this position. Other tasks may be assigned by senior support as needed. A Career with Refresco Refresco offers a competitive salary and comprehensive benefits, which include: Medical/dental/vision insurance Life insurance 401(k) savings plan with company match Paid holidays and vacation Well-being benefits Discount programs Join Refresco TODAY and enjoy a rewarding CAREER! Equal Opportunity Employer Refresco is an Equal Employment Opportunity/Affirmative Action employer. Refresco does not discriminate against qualified applicants or employees based on race, color, age, religion, sex, pregnancy, national origin, ancestry, age, physical or mental disability, veteran status, status in uniformed services, sexual orientation, gender identity, gender expression, marital status, genetic information, or any other status protected by law.