Program development internship jobs in Hendersonville, NC

Nightwing provides technically advanced full-spectrum cyber, data operations, systems integration and intelligence mission support services to meet our customers' most demanding challenges. Our capabilities include cyber space operations, cyber defense and resiliency, vulnerability research, ubiquitous technical surveillance, data intelligence, lifecycle mission enablement, and software modernization. Nightwing brings disruptive technologies, agility, and competitive offerings to customers in the intelligence community, defense, civil, and commercial markets. Nightwing CODEX (Cyber Offense and Defense Experts) brings together an elite team of mission-focused industry experts who are well known for their ability to overcome the most advanced technical challenges. The team comprises engineers of multiple disciplines including vulnerability research, reverse engineering, CNO/CNE development, hardware emulation, system engineering, data analytics and test engineering. Projects will be undertaken in small teams with close coordination with technical leadership. Working as part of a team, you will also need to be familiar with source management tools such as GIT and team coordination tools like the Atlassian suite of work products. Responsibilities to Anticipate: C/C++/Python software development Device drivers Low-level programming Reverse Engineering; binary static analysis Vulnerability Research: dynamic or static analysis, fuzzing Working with a debugger This position can be a technical intern based on the candidate's classification as determined by grad year on resume and provided via questionnaire by candidate as outlined below: Sophomore, Junior, or Senior Technical - must be enrolled in a Bachelor's degree program Post-Graduate Technical - must have an undergraduate degree and be enrolled in a graduate degree program (in degree fields listed in Basic Qualifications) by start of internship Basic Qualifications: Minimum 3.0 cumulative GPA (Please upload an unofficial transcript when applying) Must be a sophomore, junior, or senior by the start of summer 2025 in Science, Technology, Engineering or Mathematics (STEM), Computer Science, Cyber, or other related field. The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, only U.S. citizens are eligible for a security clearance. Experience with C, C++, or Python either through prior internships or educational coursework. Experience with Windows and/or Linux application programming through prior internships or educational coursework. A strong communicator with others, both written and verbal. Attention to detail: must pay strong attention to detail in order to be able to keep information accurate and organized while utilizing skills and knowledge to quickly learn about the project. A passion to learn something new every day and to stay up-to-date with developments in your field. Adept at independent problem-solving and comfortable with a general approach of taking initiative to find and develop solutions. Background check and drug screen required (every external new hire in the U.S.) Drug screen only performed on re-hires who have been gone for more than 1 year. Preferred Qualifications: Experience with the following: Vulnerability research Device drivers Low-level programming Reverse engineering; binary static analysis Working with a debugger Embedded development Operating system internals Hands-on hardware At Nightwing, we value collaboration and teamwork. You'll have the opportunity to work alongside talented individuals who are passionate about what they do. Together, we'll leverage our collective expertise to drive innovation, solve complex problems, and deliver exceptional results for our clients. Thank you for considering joining us as we embark on this new journey and shape the future of cybersecurity and intelligence together as part of the Nightwing team. Nightwing is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class.

ESSENTIAL RESPONSIBILITIES * Ability to be flexible and the ability to work with all levels of the organization. * Exceptional interpersonal communication skills and professionalism to represent the Bank in a positive way in dealing with clients and other team members. * Strong organizational skills and ability to handle multiple tasks. * Collaborating with members of the development team to design and develop new features * Contributing to and improving existing systems * Participating in code reviews and design meetings * Researching, testing, and evaluating new programs and software * Writing and implementing efficient code * Applying foundational knowledge in practical ways * Completing other duties as assigned ESSENTIAL SKILLS, EDUCATION AND EXPERIENCE * Enrollment in college or university preferred * Experience with the .NET Framework and C# * Knowledge of MVC, HTML, CSS, Bootstrap, SQL Server, and Visual Studio (preferred) * Angular and TypeScript experience preferred (or similar web framework) * Familiarity with REST-based APIs * Knowledge and interest in computer systems and the latest technologies * The ability to learn new technologies quickly * Good communication skills - both written and verbal * Attention to detail and desire to probe further into data * Strong organizational skills and ability to handle multiple tasks. * Ability to maintain confidentiality and exhibit a high degree of integrity. WORK CONDITIONS * This position must be able to sit for long periods of time as the position involves most of the time spent at a computer. * This position requires little to no travel. This description is not intended to be construed as an exhaustive list of all functions, responsibilities, skills and abilities. Additional functions and requirements may be assigned by supervisors as deemed appropriate. This document does not represent an expressed or implied contract of employment nor does it alter your at-will employment, and the Company reserves the right to change this job description and/or assign tasks for the employee to perform, as the Company may deem appropriate.

The Military DoD SkillBridge program is an opportunity for Service members to gain valuable civilian work experience through specific industry training, apprenticeships, or internships during the last 180 days of service. SkillBridge connects Service members with industry partners in real-world job experiences under Dept. of Defense Instruction 1322.29. Separating Service members can be granted up to 180 days of permissive duty to focus solely on training full-time with approved industry partners after unit commander (first O-4/Field Grade commander in chain of command) provides written authorization and approval. GE Aviation as a Skill Bridge partner offers real-world training and work experience in in-demand fields of work while having the opportunity to evaluate the Service member's suitability for the work. Military DoD SkillBridge participants are not eligible for compensation from GE Aerospace, as they continue to receive military compensation and benefits as active-duty service members. Job Description The Asheville Maintenance Technician will maintain production and facility support equipment to required specifications. As a Maintenance Technician you will be required to diagnose, repair, and calibrate mechanical, electro-mechanical, and electronic control systems for CNC machine tools, manufacturing processes, test equipment, facility/ utility and other associated equipment. Troubleshooting problems that may result from programming, tooling, machine set-up, instrumentation, calibration, component failure, and other errors. Must actively participate in a team-based environment, participate in problem solving groups, and train other Maintenance Technicians. Essential Functions/Responsibilities: * Maintain, repair, install, adjust, and modify complex process equipment and instrumentation. Work with qualified operators or support teams to validate corrective actions and demonstrate satisfactory operating condition. * Maintain and repair the facility infrastructure and utility equipment to provide a reliable and safe working environment. * Read, interpret, and follow intricate and complex blueprints, schematics, and instruction manuals as they apply to the hydraulic, pneumatic, and electro-mechanical apparatus of the CNC machine tools and manufacturing process equipment. * Train production and technical support personnel as required. * Take a lead role in completing problem solving assignments. * Utilize Maximo (CMMS) to obtain and complete work orders, in-order to keep accurate documentation of work and machine history. * Must utilize required documentation practices as described in site quality procedures. * Responsible for performing preventive and predictive maintenance on all CNC/conventional machines and process equipment. Update documentation as required. * Performs duties and tasks conforming to all safety regulations and procedures, such as LOTO, confined space, Fall Protection/Arrest, hot work permits, and NFPA 70e. Keep facilities, materials, and work areas clean and orderly, exercise good housekeeping practices. * Use of ladders, powered hand tools, fork trucks, scissor lifts and other equipment to perform maintenance duties. * Must be able to utilize complex electronic, hydraulic, and mechanical test equipment such as oscilloscopes, recorders, VOMs, vernier calipers, micrometers, dial indicators, ball bars, laser alignment tools, electronic levels and specialized test equipment as required. * Must actively participate in a team-based environment which includes, but not limited to the following: active participation in daily team meetings and activities, cooperates and relates well with others, practices direct professional communication with team members, be open to new ideas from team members, participate in continuous improvement and lean transformation, and considers opinions different from their own. Basic Qualifications/Requirements: * Required to have a High School Diploma, or GED equivalent * Minimum of 3 years of experience in industrial maintenance or previous lead technician role in comparable industry (Military Service is counted) * Strong knowledge of mechanics and the mechanical fit of components, assemblies and sub-assemblies as applied to the precision tolerances required for maintaining and/or restoring the CNC machines to O.E.M. specifications * Heavy lifting (up to 50lbs), pushing, pulling, climbing, crawling, bending, and/or squatting/stooping or working in tight places or above shoulder height * Well-rounded troubleshooting skills in mechanical, electrical, pneumatic, and hydraulic maintenance repair * Eyesight correctable to 20/25 * Experience reading and interpreting complex mechanical drawings, schematics, instruction manuals, diagrams, N/C and PLC (ladder) programs * Working knowledge of typical testing equipment devices such as oscilloscopes, megger, multimeter, ball bar, or laser alignment * Experience performing duties and tasks conforming to all safety regulations and procedures, such as LOTO, confined space, hot work permits, and NFPA 70e * Basic computer and keyboarding skills and Microsoft Office knowledge Desired Qualifications: * Associates degree in technical field of trade school certificate desired * Advanced understanding of CNC lathes and machining centers, and associated tooling and fixtures. (Machining) * Maintain a positive attitude that encompasses a team environment * Ability to lead and direct small teams within maintenance (preventive, predictive and reliability-focused) to plan and organize resources for work projects * Ability to lead problem solving team and LEAN manufacturing groups * Knowledge and understanding of logic and complex systems (PLC's, robotics, etc.) * Ability to manage time and multiple projects in addition to normal duties * Maintain proactive stance rather than reactive in dealing with equipment and process repairs or improvements * Repair equipment in safe, timely and professional manner * Good interpersonal skills and ability to train other technicians, engineers, operators, or support personnel Minimum Requirements: * High School Diploma / GED * 1+ years of mechanical experience. * Federal Aviation Administration Powerplant Mechanic certification. * Active Military Personnel Desired Characteristics: * Strong attention to detail and problem-solving abilities. * Ability to communicate effectively across all levels. * Demonstrated quality, compliance, and customer satisfaction skills. * Possess a desire to learn constantly in every aspect of OWS test operations and expand their knowledge to different technologies and Engine Programs. * Ability to work as part of a team or of their own initiative when required. * Features strong interpersonal, organizational and leadership skills, including problem-solving ability. * Previous commercial high-bypass turbofan engine testing experience including prepping, de-prepping, engine test (test cell or on-wing), line maintenance, engine changes, LRU removal and installation, and troubleshooting. * Proven leadership experience leading initiatives of moderate scope and impact. * Background in or familiarity with SAP, Oasis, or a similar ERP software. * Knowledge of borescope inspection. * Preliminary Review approved. * Designated Inspector. * Engine Test Site Operator. * Equipment operations, i.e., fork truck, overhead crane, transporter & tug. * Humble: respectful, receptive, agile, eager to learn. * Transparent: shares critical information, speaks with candor, contributes constructively. * Focused: quick learner, strategically prioritizes work, collaborative. * Problem solver: analytical-minded, challenges existing processes, critical thinker. Whether we are manufacturing components for our engines, driving innovation in fuel and noise reduction, or unlocking new opportunities to grow and deliver more productivity, our GE Aerospace teams are dedicated and making a global impact. Join us and help move the aerospace industry forward. This role requires access to U.S. export-controlled information. Therefore, for applicants who are not U.S. lawful permanent residents, U.S. Citizens, or have been granted asylee or refugee status (i.e., not a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3), otherwise known as a U.S. Person), employment will be contingent on the ability to obtain authorization for access to U.S. export-controlled information from the U.S. Government. Additional Information GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: No

Cherry Bekaert's Strategic Financing Services Practice (SFS) is seeking a Community Development Associate with a background in the New Markets Tax Credit (NMTC) or similar program area. We offer an opportunity to work with a team of experts with a deep track record in NMTC allocation applications, tax credit placement and deployment, and tax credit compliance and asset management services. The Community Development Associate will support the process for writing NMTC Allocation Applications for the portfolio of client community development entities (CDEs) and support the grant writing and applications process for clients seeking funding from other tax credit and funding programs. The Associate will also support NMTC Compliance and Asset Management activities for Community Development Entities (CDEs) and Qualified Active Low-Income Community Businesses (QALICBs) and assist with a variety of services, including filing the CDFI Fund's AMIS reports. Further, the Associate will assist the Project Finance team as they build a pipeline of potential borrowers and structured finance opportunities. The Associate will also support the work of our Community Development Consulting work, as needed, helping with presentations, memos and due diligence of potential CDE clients. The successful candidate will work with the team as we expand into new markets and regions using in-depth knowledge of and relationships with CDEs, tax credit investors, and other community development stakeholders. The candidate will have strong attention to detail, commitment to deadlines and a mission to help make a difference in low-income communities. **About SFS** : SFS has been involved in the NMTC industry since its inception and to date has secured over $1.7 billion in NMTC funding. SFS is proud to have structured and facilitated NMTC investments that have created 32,880 direct jobs, served 655,382 low-income individuals through community goods and services, and helped develop over 13.2 million square feet of new and improved commercial and industrial real estate. SFS's current portfolio consists of investments in areas with poverty rates as high as 66%, median family income as low as 14.24%, and unemployment rates as high as 31.2%. **Responsibilities** : Support the NMTC Allocation Application writing process for CDEs, including: + Supporting the primary writer of the Application by reviewing and summarizing supporting documents for strategic and technical use in the application. + Support the drafting and review of compelling business strategies, community outcomes and other narratives to maximize scoring and increase the likelihood of successful outcomes. + Identify and review appropriate NMTC pipeline opportunities to suit unique CDE needs (considering geography, project type, community impacts, etc.) + Synthesizing and incorporating industry terms, trends and data to support business strategies, community outcomes and compelling applications. Support the NMTC Compliance and Asset Management activities, including: + Support the team with loan closing documents and reporting requirements. + Support the submittal of annual CDE compliance reports sent to the U.S. Treasury Department's CDFI Fund via the AMIS reporting system. + Monitor CDE compliance with NMTC Program and Allocation Agreement including analysis of Sub-All and Redemption testing. + Support drafting of QALICB certifications and community impact information, quarterly project level financial statements and compliance reports. + Provide CDE portfolio data to Application Writing team, as needed Support the Project Finance team, including: + Collect, package, and manage due diligence on potential borrower and Project Sponsors. + Gathering data, drafting memos, assisting with fundings/closings Support of overall SFS team, including: + Collaborating with SFS team participants to provide effective, prompt and detailed support as required for submission of various funding applications and/or financial closings. + Support with PowerPoint presentations, data gathering/summarizing, scheduling and materials preparation. + Other job-related functions as assigned. + Travel: 5-10% **Successful Candidates Will Demonstrate/Posses** : + 3+ years of professional/industry experience in grant writing, community development finance, tax credit finance or CDE/CDFI Lending + Strong written communication skills + Knowledge of tax credit finance, data and/or reporting, with specific experience with NMTC and CDFI Fund's AMIS reporting preferred + Passion for community investment and revitalization that will spark transformation, inclusion, and social justice + Ability to be flexible and work under fixed timeframes to meet deadlines + Experience in working with borrowers, lenders, investors and stakeholders + Ability to work independently and collaboratively on different phases of projects + Capable of prioritizing workflow and managing compliance and reporting obligations + Proficiency in Word, PowerPoint and Excel + BA in English, Journalism, Finance, Economics, Planning or related field preferred **What you can expect from us:** + Our shared values that foster inclusion and belonging including uncompromising integrity, collaboration, trust, and mutual respect + The opportunity to innovate and do work that motivates and engages you + A collaborative environment focused on enabling you to further your career growth and continuous professional development + Competitive compensation and a total rewards package that focuses on all aspects of your wellbeing + Flexibility to do impactful work and the time to enjoy your life outside of work + Opportunities to connect and learn from professionals from different backgrounds and with different cultures **Benefits Information:** Cherry Bekaert cares about our people. We offer competitive compensation packages based on performance that recognize the value our people bring to our clients and our Firm. The salary range for this position is included below. Individual salaries within this range are determined by a variety of factors including but not limited to the role, function and associated responsibilities, a candidate's work experience, education, knowledge, skills, and geographic location. In addition, we offer a comprehensive, high-quality benefits program (********************************** which includes annual bonus, medical, dental, and vision care; disability and life insurance; generous Paid Time Off; retirement plans; Paid Care Leave; and other programs that are dedicated to enhancing your personal and work life and providing you and your family with a measure of financial protection. **Pay Range:** $71,700-$103,500 **About Cherry Bekaert** Cherry Bekaert, ranked among the largest assurance, tax and advisory firms in the U.S., serves clients across industries in all 50 U.S. states and internationally. For more details, visit ******************************* Cherry Bekaert provides equal employment opportunities to applicants and employees without regard to race, color, religion, age, sex, sexual orientation, gender identity/expression, national origin, citizenship status, protected veteran status, disability status, or any other category protected by applicable federal, state or local laws. ****************************************** contains further information regarding the firm's compliance with federal, state and local recruitment and hiring laws. This role is expected to accept applications for at least five calendar days and may continue to be posted until a qualified applicant is selected or the position has been cancelled. Candidates must demonstrate eligibility to work in the United States. Cherry Bekaert will not provide work sponsorship for this position. Cherry Bekaert LLP and Cherry Bekaert Advisory LLC are members of Allinial Global, an accountancy and business advisory global association. Visit us at ************************ and follow us on LinkedIn, Instagram, Twitter and Facebook. © 2025 Cherry Bekaert. All Rights Reserved.

At Trane Technologies TM and through our businesses including Trane and Thermo King , we create innovative climate solutions for buildings, homes, and transportation that challenge what's possible for a sustainable world. We're a team that dares to look at the world's challenges and see impactful possibilities. We believe in a better future when we uplift others and enable our people to thrive at work and at home. We boldly go. **What's in it for you:** **Be a part of our mission!** As a world leader in creating comfortable, sustainable, and efficient environments, it's our responsibility to put the planet first. For us at Trane Technologies, sustainability is not just how we do business-it is our business. Do you dare to look at the world's challenges and see impactful possibilities? Do you want to contribute to making a better future? If the answer is yes, we invite you to consider joining us in boldly challenging what's possible for a sustainable world. This is an exciting opportunity to make a difference in building efficiency and sustainability through our Equipment, Service or Controls / Building Automation offerings. Trane Technologies, the global leader in innovative climate solutions, hands on summer internship allows participants to explore a career in Technical Sales through the following: · A 12-week internship program that will challenge and develop your technical, business, sales engineering, leadership, and communication skills - providing insight into a sales career with Trane Technologies. · Gain and interact with the world's most complete line of commercial, industrial, and institutional heating, ventilating, and air conditioning (HVAC) equipment and building management controls. · Be exposed to the many facets of Trane Technologies' businesses: Service, Equipment, Building Automation, Application, Fulfillment, and much more. · This internship will provide you with the experience to pursue a career in Technical Sales and creates the opportunity to join our industry leading Graduate Training Program (GTP) after graduation. **Where is the work:** This position has been designated as **On-Site.** **What you will do:** Our award-winning internship program provides you the opportunity to learn more about us while you collaborate with peers across North America. As a Technical Sales Intern you may experience or gain exposure to: · Work directly with our industry leading Sales Account Managers and customers. · Understand the design, application and sale of systems, controls, parts, and services for commercial, industrial, and institutional buildings. · Attend sales meetings; business functions; sales and service calls; customer meetings alongside experienced account managers and mentors. · Understand the steps sales engineers take from start to finish on a job and be hands-on in those steps throughout the internship. · Gain an appreciation for the importance of the relationship with our customers as you work with them as a daily point-of-contact creating a sense of ownership and importance in the solution-making process. **What you will bring:** · Actively enrolled in a bachelor's or master's degree in Engineering (open to all Engineering areas of emphasis) throughout the entire duration of the summer internship. o Candidates must have completed at least their sophomore or 2 nd year before the start of the summer internship to be eligible for internship positions. · Be a U.S. citizen or have the legal right to work in the U.S. without requiring sponsorship now or in the future. · A passion for continuous learning in technical fields, ensuring a solid foundation for understanding and communicating engineering solutions. · This posting is for multiple opportunities. Some positions may be remote while others may require a hybrid or onsite assignment at one of our facilities across North America. · Possess a valid driver's license for a minimum of 12 months, ability to provide proof of insurance, and have no major or frequent traffic violations including, but not limited to: o DUI in the previous 3 years o Hit & Run, License Suspension, Reckless / Careless Driving or multiple smaller infractions or preventable collisions in the previous 3 years. **Compensation:** Pay Range: $21.00-$30.00 Total compensation for this role will include a commission/incentive plan. Disclaimer: This base pay range is based on US national averages. Actual base pay could be a result of seniority, merit, geographic location where the work is performed. **Travel:** · Less than 15% in defined geography **Equal Employment Opportunity:** We are an equal opportunity employer; all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, pregnancy, age, marital status, disability, status as a protected veteran, or any legally protected status. _This role has been designated by the Company as Safety Sensitive._

WHO WE ARE VEG is a rapidly growing emergency company with hospital locations across the United States. Our mission is helping people and their pets when they need it most. We are revolutionizing emergency medicine with a "customer first" mentality and a true, employee-centric work environment. TALENT + CULTURE AT VEG At VEG, we want people and their pets to feel safe, secure, and valued; we want our employees to feel the same way. What we're aiming to achieve on the customer side is equivalent in nature to what we want for our employees: to have the best experience possible. With the highest NPS score in our industry, we're ready to ensure that VEG is always the place where the best and brightest in the emergency world not only want to work, but stay and grow. For our customers and their pets, we strive to find a way to say, "yes." We do the same and more for our teams. In fact, VEG is one of this year's nominees for INC Magazine's Best Places to Work! ABOUT THE EXTERNSHIP VEG's Veterinary Technician Student Externship Program gives vet tech students hands-on experience in emergency medicine while working alongside our credentialed, emergency veterinary technicians. Students will focus on honing their emergency skills including obtaining patient vitals, processing laboratory samples, caring for hospitalized patients, triaging emerging cases, and collaborating in a fast-paced environment. If you're as interested in emergency medicine as we are, we'd love to have you! Note: This is an unpaid externship and rabies vaccinations are required unless your school's rabies mitigation policy allows you to be unvaccinated and still handle unvaccinated pets. * Flexibility: YOU Choose the length of your externship to meet your school's requirements * Location: YOU choose where you'd like to extern (depending on hospital bandwidth) * Mentorship: YOU will be supported by a credentialed veterinary technician * Focus: YOU will be fully-immersed in what emergency medicine truly entails REQUIREMENTS * Currently enrolled in an AVMA accredited veterinary technology or veterinary nursing program (or one actively seeking accreditation) and will be in a class that requires externship hours and/or skills. This application is not for veterinary students or veterinary assistant students - only veterinary technology or veterinary nursing students. * Your externship must need to begin within 6 months of application. * You must be vaccinated for rabies unless your school's rabies mitigation policy allows unvaccinated students to handle unvaccinated animals.

Build a Career That Matters with One of the World's Most Respected Employers! * - - - - - - - - - - - THE OPPORTUNITY Michelin has an immediate opening for an IT intern for the summer of 2026 (May-August). You will be responsible for developing real world IT solutions for Michelin's business. Your summer project will foster innovation by enabling creativity, experimentation, and problem solving for our business. If respect for people, teamwork and trust are some values you live by you should consider joining us, the Worldwide leader in Tires! This opportunity is at our North American Corporate Headquarters in Greenville, SC. Our 1400 employees take pride in supporting the diverse US and Canadian workforce and thinking globally while also acting locally to uplift and enhance our local upstate communities. Greenville is situated just about halfway between Charlotte, North Carolina and Atlanta, Georgia. Greenville's friendly, thriving downtown and surrounding areas are full of year-round activities for all ages. From one-of-a-kind shops, boutiques and art galleries to museums, tours and many outdoor activities, Greenville is a fabulous place to visit and live. Our campus features a cafeteria, credit union, trademark store and health center. We are driven to be the employer of choice for people looking for a career with respect and purpose. Come join our team! Ready to Shape the Future of Innovation? Michelin is building a world-leading manufacturer of life-changing composites and experiences. Pioneering engineered materials for more than 130 years, Michelin is uniquely positioned to make decisive contributions to human progress and a more sustainable world. Drawing on its deep know-how in polymer composite materials, Michelin is constantly innovating to manufacture high-quality tires and components for critical applications in demanding fields as varied as mobility, construction, aeronautics, low-carbon energies and healthcare. The care placed in its products and deep customer knowledge inspire Michelin to offer the finest experiences. This spans from providing data- and AI-based connected solutions for professional fleets to recommending outstanding restaurants and hotels curated by the MICHELIN Guide. Why Michelin? * Career Growth: Personalized development plans, mentorship, and cross-functional opportunities. Unique career paths and opportunities for advancement. * Inclusive Culture: Thrive in a diverse, supportive environment where your competencies, contributions and behaviors are recognized. Option to join one of our Business Resource Groups and Inclusion Councils. * Innovation-Driven: Work on projects that matter-from sustainable materials to digital transformation. * Community Impact: Be part of a company that does what's right. We use sustainable business practices while balancing the needs of our customers and communities. Michelin provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), parental status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, or other non-merit-based factors. Consistent with these obligations, Michelin also provides reasonable accommodations to employees and applicants with disabilities and for sincerely held religious beliefs. If you need accommodation for any part of the employment process because of a disability, please contact us at accommodations@michelin.com. This position is not available for immigration sponsorship. We build the future with people like you. Begin your career with Michelin today!

**ABOUT YOU** Are you a passionate problem-solver who thrives in a fast-paced, collaborative environment? Do you take pride in doing the right thing and delivering quality work with integrity? Are you excited to learn how construction projects come to life - from the first idea to the final walkthrough? If you answered "Yes!" - **this opportunity was built for you.** At ARCO Design/Build, we're not just building structures - we're building the next generation of industry leaders. Join us and discover what it means to be part of one of the nation's top design/build construction firms. **WHAT WE CAN OFFER YOU** **Four core values that guide our culture:** + Treat people fairly and do the right thing + Understand our customers' business and solve their problems + Be positive, upbeat, and have fun + Create opportunities for individual financial success based on merit **Here's what you'll get as part of our internship/co-op program:** + **Competitive hourly pay** with overtime opportunities + **Housing stipend** available based on need + **Medical, dental, and vision insurance** for interns working at least 3 months + **Professional development** through training and mentorship + **Company-sponsored lunches, happy hours, and networking events** + **Fully stocked kitchens** with drinks and snacks + **A fun, inclusive work environment** We don't just invest in projects - we invest in people. From your first day, you'll be part of a team that values growth, connection, and doing great work. **ARCO is an Equal Opportunity Employer.** We celebrate diversity and are committed to creating an inclusive environment for all team members, interns, and co-ops. **A DAY IN THE LIFE** As a Construction Design/Build Project Manager (DBM) Intern/Co-op, every day brings a new lesson. You'll gain exposure to the full lifecycle of a project while working alongside experienced professionals who are invested in your growth. Here's what you can expect: + **Concept to Completion Approach** - Gain how ARCO manages projects from the initial concept through final delivery. + **Estimating and Takeoffs** - Learn to describe project proposals and assign accurate dollar values. + **Scheduling** - Assist in creating timelines for subcontractors/trades activities. + **Design Meetings** - Attend meetings with the owner and design team, including structural engineers and architects. + **Reporting** - Prepare weekly reports, document progress, and track meeting action items **.** + **Shadowing** - Join project calls and site meetings to observe how our Design/Build Managers lead. + **Buyout** - Send bid instructions, schedules, and drawings to subcontractors. Evaluate proposals and assist with awarding subcontracts. + **Permitting** - Complete and submit permit applications with necessary documents and fees to city/county/fire authorities. + **Shop Drawing & Submittal Review** - Receive and route submittals to DBMs and communicate approvals to subcontractors. + **Billing** - Learn about subcontracts, change orders, pay requests, and pay applications. + **Job Site Visits** - Visit job sites with DBMs to monitor project progress. + **Training & Learning** - Attend offsite trainings and biweekly learning sessions provided by the Learning and Development team. + **Business Development** - Gain exposure to how we build client relationships and implement industry-wide business development strategies. No matter where you're starting from, you'll leave this experience with valuable industry knowledge and a strong foundation for a future in construction. **NECESSARY QUALIFICATIONS** + Enrolled in an accredited **Civil, Mechanical, Architectural, Construction Management, Building Science, or Construction Engineering** undergraduate or graduate program _(other related engineering majors will be considered)_ + Excellent verbal communication skills, attention to detail, and a strong work ethic + Previous Co-op or Intern experience in construction preferred, but not required + GPA 3.0 or higher preferred, but not required **MAKE YOUR MOVE** With **38 offices nationwide** , ARCO Design/Build is one of the fastest-growing construction firms in the country - and we're just getting started. Ranked #3 on **ENR's Top 100 Design-Build Firms** , we specialize in delivering high-quality industrial and commercial projects through a fully integrated approach. We're proud to be **100% associate-owned** , offering every full-time team member a stake in our success through our **Employee Stock Ownership Program (ESOP)** . Whether you're looking to gain experience, find mentorship, or launch your career, you'll find more than just an internship here - you'll find opportunity, impact, and a team that values your growth. From day one, the opportunity for success at ARCO is limitless. _ARCO does not accept unsolicited resumes from individual recruiters or third-party recruiting agencies without pre-approval from our Human Resources team. ARCO will not be responsible for any fees related to unsolicited resumes or candidates sent directly to our hiring managers._ **LEGAL DISCLAIMER** EOE, including disability/vets

World Acceptance Corporation is excited to host an IT Service Desk Intern for the summer of 2026. The program will begin in late May and will last 10-12 weeks. The IT Service Desk Intern will assist in providing technical support and issue resolutions to internal customers across the organization. This position is designed to give hands-on experience in troubleshooting hardware, software, and network issues while learning fundamental IT support processes. Responsibilities may include assisting with password resets, equipment setup, inventory tracking, basic troubleshooting, and documenting support procedures under the guidance of the Service Desk team. Essential Duties and Responsibilities: Assist the IT Service Desk team in providing first-level technical support to internal users in the corporate office and branch locations across the U.S. Learn to respond to help requests received through the ticketing system, by phone, or in person. Assist with setup, configuration, and deployment of new computers, peripherals, and other equipment. Support end users with basic troubleshooting of hardware, software, and network connectivity issues. Help maintain IT inventory, including hardware and software tracking and stock replenishment. Assist in creating and updating knowledge base articles and user guides. Participate in IT projects and rollouts as assigned, gaining exposure to real-world IT operations. Provide excellent customer service while learning effective communication and problem-solving techniques. Maintain confidentiality and follow IT security guidelines and best practices. Perform other duties as assigned by the Service Desk Manager or senior IT staff. Competencies: To perform the internship successfully, an individual should demonstrate the following: Continuous Learning - Demonstrates eagerness to learn new technologies and IT processes. Seeks feedback and applies it to improve performance. Customer Service - Displays professionalism and courtesy. Responds promptly to user needs and follows up to ensure satisfaction. Problem Solving - Thinks critically to identify simple solutions. Escalates more complex issues appropriately. Teamwork - Works well within a team environment. Shares knowledge, asks questions, and supports others. Use of Technology - Shows interest in technology and a willingness to learn new systems and tools. Education and/or Experience: Currently pursuing an Associate or Bachelor's degree in information technology, Computer Science, or a related field. Previous internship, coursework, or personal experience in IT support or troubleshooting preferred but not required. CompTIA A+ or similar certification coursework in progress is a plus. Physical Demands: Must be able to remain in a stationary position for extended periods. Occasionally move about the office to access equipment, files, and supplies. Operate a computer and other standard office equipment regularly. May occasionally lift up to 25 pounds. Work Environment: Office environment. Occasional travel may be required. This job description reflects management's assignment of essential functions; and nothing in this herein restricts management's right to assign or reassign duties and responsibilities to this job at any time. It is the policy of World Acceptance Corporation to provide equal employment opportunity (EEO) to all persons regardless of age, color, national origin, citizenship status, physical or mental disability, race, religion, creed, gender, sex, sexual orientation, gender identity and/or expression, genetic information, marital status, status with regard to public assistance, veteran status, or any other characteristic protected by federal, state or local law. In addition, World Acceptance Corporation will provide reasonable accommodations for qualified individuals with disabilities.

Hogan Construction Group is a fast paced, family owned, mid-sized Commercial General Contractor working in the Southeastern United States. We provide both Internships and Co-Op opportunities for students during their pursuit of a college degree. Candidates should be detail oriented, self-starters who enjoy the challenges of interesting and diverse projects. The Internship and Co-Op Program is designed to provide individuals with the opportunity to experience all aspects of commercial construction. Students will be given hands on duties that involve Project Management, Field Management, Estimating, Business Development, Marketing, and Finance which will advance their knowledge of the total construction business. The goal of the Internship and Co-Op Program is to develop the next generation of future Hogan employees. Requirements: * Current Higher Education Student working towards an undergraduate or graduate degree in Construction, Engineering, or Architecture. * Basic Knowledge of Building Construction. * Working Knowledge of Microsoft Office Programs required. Hogan Construction Group is an Equal Opportunity Employer. Equal Opportunity Employer, including disabled and veterans.

Co-Broadcaster InternshipLocation: Forest City, North Carolina Team: Forest City Owls (Summer Collegiate Baseball - Coastal Plain League) Reports To: General Manager - Sabrina Vetter Overview:Are you passionate about sports and looking to launch your career in the industry? The Forest City Owls are seeking energetic and motivated individuals to join our front office as a Co-Broadcast Intern for the upcoming summer season. This internship offers a hands-on opportunity to gain real-world experience in ticket operations, fan engagement, and event management while being part of a fast-paced, fun, and professional baseball environment. Our interns aren't just “helpers” - they're a vital part of our team. You'll learn the ins and outs of ticketing systems, customer service, game-day operations, and sports business fundamentals. This is the perfect role for someone who wants to grow, learn, and make an impact in the sports world. What You'll Gain: Valuable Career Experience working directly with team executives and fans Compensation for your efforts and commitment A Fun, Fast-Paced Work Environment at one of the top teams in summer collegiate baseball Host Family Housing available (if needed) Professional Development through weekly meetings, mentorship, and real responsibility Paid Stipend position that will be paid biweekly throughout the season Responsibilities: Provide Color Commentary All home games Most away games Travel on team bus Coordinate with broadcaster and opposing team for broadcast location at their stadium and your needs Broadcast Booth & Equipment Cleaning and maintaining of broadcast booth after each home game Equipment Sound board, adaptor, headset, and camera (home games) Sound board, adaptor, headset (away games) All equipment to be removed and stored at the office or be kept in your possession (not at the ballpark) after each game All equipment to be removed and stored at the office in the off-season Pre-game and post-game interviews (weekly “SportsCenter” videos and commercials) Collaborate with Videography Intern Give to Social Media Intern for posting Radio Show WAGY radio show to promote upcoming events (Pat Nanney) Determine how many at the beginning of the season Obtain “Weekend at a Glance” from Marketing Intern for reference WCAB radio show to promote upcoming events Determine how many at the beginning of the season Obtain “Weekend at a Glance” from Marketing Intern for reference Coordinate away game broadcasts to play on live radio Sponsor Commercials Get to Sponsors at the beginning of the year to either film and/or record or reuse existing commercials for home game live streams and away game radio streams Collaborate with Videography Intern to film commercials for home game live streams Record commercials for away game radio streams Streaming Games Coordinate with Flo Sports and CPL to set-up live stream settings (on OBS [free and easy] or another streaming software) for home games Home stream MUST include graphics (scoreboard, team logos, updating) plus score, inning, balls, strikes and outs (league director or previous broadcaster(s) can help with this) Coordinate on slack (N.O.C. team) to test stream audio and video before each home game Stream the away games via Mixlr (used in the past) or another platform Requirements: Currently pursuing or recently completed a degree in Sports Management, Business, Marketing, Communications, or a related field A passion for working in sports and eagerness to learn and grow Excellent customer service and communication skills Professional, reliable, and team-oriented with a strong work ethic Knowledge and enthusiasm for baseball preferred Must be available to work all home games, including nights and weekends (late May through early August) Must have reliable transportation and a personal laptop Team Culture & Expectations: Be ready to learn by doing - we'll teach, you'll apply. Maintain a professional yet fun attitude; our fans and sponsors notice your energy. Collaborate and communicate - our success comes from working together. Take initiative; when things slow down, jump in to create fan experiences or assist other departments. Be respectful, timely, and accountable - we're all in this together from first pitch to final out. Schedule:Interns are expected to start in office on or around May 15th, 2026 and remain working through August 15th, 2026.Interns will work the following: All home games In office 10am-5pm Monday - Saturday 2 days off per week (pending home game schedule) 1 hour lunch break each day Additional Opportunities:Interns are encouraged to participate in community appearances, assist with promotions and creative fan experiences, and engage with our regular fans and sponsors throughout the season. You'll also be involved in weekly meetings where you can share ideas and feedback - we want you to leave here ready for your next step in sports. Ready to take the field with us? Apply today and be part of the Forest City Owls family - where every game is a chance to learn, connect, and make lasting memories in the world of baseball.We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, national origin, sex, sexual orientation, age, disability, gender identity, marital or veteran status, or any other protected class.

Working at Freudenberg: We will wow your world! Responsibilities: Develop and document a framework for Enka structure design, including filament configurations and polymer material selection. Create comprehensive reports and presentations to guide new engineers and designers in future product development. Assist in planning and executing a Design of Experiments (DoE), producing documentation to support training and baseline development efforts. Utilize CAD software to model and refine 3D structural geometries for testing and analysis. Conduct ASTM-compliant testing to evaluate compression strength across variable combinations of shape, filament diameter, and line speed, identifying optimal performance parameters. Qualifications: Academic background in Polymer Science, Textile Engineering, or related disciplines Hands-on experience with CAD software, textile manufacturing technologies, and statistical analysis methods The Freudenberg Group is an equal opportunity employer that is committed to diversity and inclusion. Employment opportunities are available to all applicants and associates without regard to race, color, religion, creed, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity or expression, national origin, ancestry, age, mental or physical disability, genetic information, marital status, familial status, sexual orientation, protected military or veteran status, or any other characteristic protected by applicable law. Freudenberg Performance Materials LP (USA)

Welcome to Furman University's Career Site! * IMPORTANT: Load all documents in the My Experience area under Resume/CV. This may include your resume/C.V., cover letter, unofficial transcript, teaching philosophy, etc. Please wait for all documents to finish uploading before clicking Next. * If the process times out you will lose your progress, so please ensure you have all necessary documents available before starting. * The drop-down lists only display so many options: please type into a drop-down list to search for your option. For example: in Field of Study, you may need to enter your field name. If you have no field, type "None." * If you have previously applied, make sure your information is current as you can transfer it to another application. * Prior to submitting your application, verify all information for accuracy and ensure you have uploaded all appropriate documents. Once submitted, you will not be able to edit your application other than to change your contact information. If you have any questions or need additional assistance, please contact the Office of Human Resources via email at ********************** or by calling ************. Job Title: Associate AD - Athletics Development Job Family: Professionals Full-Time/Part-Time: Full time Compensation Grade: 8S Pay Type: Salary Department: Athletics Development Job Summary: The Associate Athletic Director for Development is responsible for driving philanthropic growth for Furman Athletics. This role cultivates, solicits, and stewards major and planned gifts, with a core emphasis on strengthening the Furman Athletics Fund (FAF) and building athletic endowments. Working closely with both athletic and university leadership, this position supports student-athlete scholarships, facilities enhancements, and long-term strategic initiatives. Job Description: Primary Duties & Responsibilities * Major & Planned Gifts Management - Oversee a portfolio of high-potential major gift and planned giving prospects. Lead cultivation, solicitation, and stewardship strategies for six- and seven-figure commitments. * Endowment & FAF Strategy - Advance the Furman Athletics Fund (FAF) by prioritizing endowment growth and supporting long-term fundraising goals. Collaborate with development leadership and sport administrators to integrate endowment priorities into overall strategy. * Prospect Development & Research - Partner with University Advancement to identify and research new major gift and planned giving prospects. Maintain a dynamic prospect pipeline based on capacity, affinity, and engagement. * Gift Documentation & Impact Reporting - Create compelling proposals, gift agreements, and impact reports that align donor interests with athletic priorities. Ensure accurate tracking of donor data and stewardship milestones. * Internal Collaboration - Work closely with the Senior Associate AD, sport administrators, coaches, and advancement partners to support integrated gift strategies. Provide support in donor communication and relationship maintenance alongside the Director of Administration & Events. * Athletics Development Team Participation - Contribute to athletics development strategy. Coach and mentor junior staff on best practices in collegiate athletic development and major gift strategy. Minimum Qualifications * Bachelor's degree required; Master's preferred. * At least 5 years of major gift or planned giving experience, preferably in intercollegiate athletics or higher education. * Demonstrated success securing six- and seven-figure gifts and cultivating planned gifts or endowment vehicles. * Strong written, verbal, and interpersonal communication skills. * Ability to work independently managing a complex portfolio and to collaborate across departments. Preferred Qualifications * Experience in NCAA athletics program fundraising. * Familiarity with endowment structures and legacy giving strategies. * Strategic mindset with ability to align donor interests with institutional and athletic goals. * Comfort with travel and evening/weekend donor engagement. Working Conditions * Frequent travel for cultivation and stewardship visits. * Evening and weekend availability required. * Primarily based at Furman's Athletic Complex, with flexibility as needed for development activities. Education Requirements: Certification Requirements: Job Posting End Date (if date is blank, posting is open ended):

Purpose Financial, Inc. is an innovative consumer financial services company that offers a diverse suite of credit products, promoting financial inclusion and meeting consumers wherever they are. Through its brands, the company is committed to helping customers achieve their version of financial stability in the moment and in the future. Since 1997, Purpose Financial has been a pioneer in the consumer credit and financial services market offering money solutions in over 1,500 storefronts locations and online lending. Providing services in over 27 states, Purpose Financial employs over 3,700 team members. At Purpose Financial we are always on the lookout for motivated individuals who share in our values of mutual respect to join our team of outstanding professionals. We offer: Competitive Wages Life/Health Benefits 401(k) Savings Plan Educational Assistance Paid Vacation/Holidays Employee Discounts Work-life Balance Business Casual Environment Paid Volunteer time off Rewards and Recognition Program EAP To learn more about Purpose Financial visit Purpose Financial Website Position Summary Human Resources Info This is a posted IT Intern to see if posting changes. Job Responsibility Human Resources Info This is a posted IT Intern to see if posting changes. Job Responsibilities Cont. Education Required Human Resources Info This is a posted IT Intern to see if posting changes. Experience Required Human Resources Info This is a posted IT Intern to see if posting changes. Knowledge Required Human Resources Info This is a posted IT Intern to see if posting changes. Physical Requirements Human Resources Info This is a posted IT Intern to see if posting changes. Competencies Compliance/IntegrityCustomer CentricityInterpersonal SkillsResilienceResults/AccountabilityWorking with Diverse PopulationsTravel Attire Other All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or disability. Requisition ID: 15200

Do you want to build an impactful career to change the world for the better? Geosyntec has an exciting opportunity for a Geographic Information Systems (GIS) Intern in one of our Carolinas (Raleigh, Charlotte, Wilmington and Asheville, NC, or Greenville, SC) offices. The position offers the opportunity to apply academic knowledge to real-world environmental and infrastructure projects using ArcGIS Pro, ArcGIS Online, and related tools. Typical work involves spatial data management, map production, and analysis to support the development and management of GIS projects for a variety of technical practices including, contaminated site investigation, human health risk assessment, subsurface remediation, water resources, and geotechnical engineering. The position is full-time (40 hours/week) for approximately 13 to 15 weeks during the summer semester of 2026. Candidates are responsible for coordinating their own transportation to and from the office. Geosyntec is an innovative, international engineering and consulting firm serving private and public-sector clients to address new ventures and complex problems involving our environment, natural resources, and civil infrastructure. Our engineers, scientists, technical and project employees serve our clients from offices across the world. Ranked by ENR as one of the top environmental engineering design firms, Geosyntec is internationally known for its technical leadership, broad experience, and exceptional client service. We invest in our people. Each employee is unique, and your career at Geosyntec will be too. We offer competitive pay and benefits, and well-being programs to support you and your family. To Learn More Visit: ********************************** Essential Duties and Responsibilities Use Geographic Information Systems (GIS), primarily Esri ArcGIS Pro and ArcGIS Online, to produce, display, and analyze spatial data; Create, organize, and maintain GIS datasets (e.g., feature classes, rasters, tables, web layers) to support reporting, analysis, and data visualization. Prepare clear, publication-quality figures and map layouts for technical reports, presentations, and regulatory submittals using established templates and cartographic standards; Assist with the development and maintenance of environmental data sets using desktop tools (e.g., Excel, MS Access) and environmental data management systems (such as EQuIS) including compiling, formatting, verifying, and exporting large diverse datasets for analysis and GIS use; Assist with configuration and testing of mobile data collection and web GIS tools (e.g., ArcGIS Survey123, Field Maps, and ArcGIS Online web maps) and associated Word/PDF report templates used for environmental field programs. Drive personal, company, and rental vehicles to client or company project or office sites, and other business locations, as needed. Education and Licensure Currently registered in a Bachelor's or Master's university degree program in a relevant technical discipline (geography, geology, environmental science, engineering, or related field). (required) At least 2-3 completed courses in GIS, cartography, or remote sensing Skills, Experience and Qualifications Familiarity with GIS and its associated software, analysis, reporting, cartography, data management, and visualization, preferably using ArcGIS Pro. (required) Experience with Esri ArcGIS Pro (and preferably ArcGIS Online),including basic geodatabase structures and geoprocessing concepts. (preferred) Knowledgeable with cartographic techniques and best practices. (required) Exceptional attention to detail and strong organizational skills. (required) Understanding of data quality control concepts. (required) Solid general technical / analytical capabilities, including the ability to learn new software quickly. (required) Proficiency in MS Excel, including working with tables, filters, basic formulas, and simple charts to visualize data. (preferred) Familiarity with other mapping software (e.g., Google Earth, QGIS, PostGIS). (preferred) Exposure to or interest in programming languages such as Python and VBA. (preferred) Familiarity with environmental data and knowledge of basic statistics. (preferred) Experience building or using mobile data collection tools (e.g., Survey123, Field Maps, EQuIS Collect) for environmental or infrastructure projects. (preferred) Valid U.S. driver's license and satisfactory driving record for business travel. (required) #LI-TJ1 #LI-Onsite

The Military DoD SkillBridge program is an opportunity for Service members to gain valuable civilian work experience through specific industry training, apprenticeships, or internships during the last 180 days of service. SkillBridge connects Service members with industry partners in real-world job experiences under Dept. of Defense Instruction 1322.29. Separating Service members can be granted up to 180 days of permissive duty to focus solely on training full-time with approved industry partners after unit commander (first O-4/Field Grade commander in chain of command) provides written authorization and approval. GE Aviation as a Skill Bridge partner offers real-world training and work experience in in-demand fields of work while having the opportunity to evaluate the Service member's suitability for the work. Military DoD SkillBridge participants are not eligible for compensation from GE Aerospace, as they continue to receive military compensation and benefits as active-duty service members. **Job Description** The Asheville Maintenance Technician will maintain production and facility support equipment to required specifications. As a Maintenance Technician you will be required to diagnose, repair, and calibrate mechanical, electro-mechanical, and electronic control systems for CNC machine tools, manufacturing processes, test equipment, facility/ utility and other associated equipment. Troubleshooting problems that may result from programming, tooling, machine set-up, instrumentation, calibration, component failure, and other errors. Must actively participate in a team-based environment, participate in problem solving groups, and train other Maintenance Technicians. **Essential Functions/Responsibilities:** + Maintain, repair, install, adjust, and modify complex process equipment and instrumentation. Work with qualified operators or support teams to validate corrective actions and demonstrate satisfactory operating condition. + Maintain and repair the facility infrastructure and utility equipment to provide a reliable and safe working environment. + Read, interpret, and follow intricate and complex blueprints, schematics, and instruction manuals as they apply to the hydraulic, pneumatic, and electro-mechanical apparatus of the CNC machine tools and manufacturing process equipment. + Train production and technical support personnel as required. + Take a lead role in completing problem solving assignments. + Utilize Maximo (CMMS) to obtain and complete work orders, in-order to keep accurate documentation of work and machine history. + Must utilize required documentation practices as described in site quality procedures. + Responsible for performing preventive and predictive maintenance on all CNC/conventional machines and process equipment. Update documentation as required. + Performs duties and tasks conforming to all safety regulations and procedures, such as LOTO, confined space, Fall Protection/Arrest, hot work permits, and NFPA 70e. Keep facilities, materials, and work areas clean and orderly, exercise good housekeeping practices. + Use of ladders, powered hand tools, fork trucks, scissor lifts and other equipment to perform maintenance duties. + Must be able to utilize complex electronic, hydraulic, and mechanical test equipment such as oscilloscopes, recorders, VOMs, vernier calipers, micrometers, dial indicators, ball bars, laser alignment tools, electronic levels and specialized test equipment as required. + Must actively participate in a team-based environment which includes, but not limited to the following: active participation in daily team meetings and activities, cooperates and relates well with others, practices direct professional communication with team members, be open to new ideas from team members, participate in continuous improvement and lean transformation, and considers opinions different from their own. **Basic Qualifications/Requirements:** + Required to have a High School Diploma, or GED equivalent + Minimum of 3 years of experience in industrial maintenance or previous lead technician role in comparable industry (Military Service is counted) + Strong knowledge of mechanics and the mechanical fit of components, assemblies and sub-assemblies as applied to the precision tolerances required for maintaining and/or restoring the CNC machines to O.E.M. specifications + Heavy lifting (up to 50lbs), pushing, pulling, climbing, crawling, bending, and/or squatting/stooping or working in tight places or above shoulder height + Well-rounded troubleshooting skills in mechanical, electrical, pneumatic, and hydraulic maintenance repair + Eyesight correctable to 20/25 + Experience reading and interpreting complex mechanical drawings, schematics, instruction manuals, diagrams, N/C and PLC (ladder) programs + Working knowledge of typical testing equipment devices such as oscilloscopes, megger, multimeter, ball bar, or laser alignment + Experience performing duties and tasks conforming to all safety regulations and procedures, such as LOTO, confined space, hot work permits, and NFPA 70e + Basic computer and keyboarding skills and Microsoft Office knowledge **Desired Qualifications:** + Associates degree in technical field of trade school certificate desired + Advanced understanding of CNC lathes and machining centers, and associated tooling and fixtures. (Machining) + Maintain a positive attitude that encompasses a team environment + Ability to lead and direct small teams within maintenance (preventive, predictive and reliability-focused) to plan and organize resources for work projects + Ability to lead problem solving team and LEAN manufacturing groups + Knowledge and understanding of logic and complex systems (PLC's, robotics, etc.) + Ability to manage time and multiple projects in addition to normal duties + Maintain proactive stance rather than reactive in dealing with equipment and process repairs or improvements + Repair equipment in safe, timely and professional manner + Good interpersonal skills and ability to train other technicians, engineers, operators, or support personnel **Minimum Requirements** : - High School Diploma / GED - 1+ years of mechanical experience. - Federal Aviation Administration Powerplant Mechanic certification. + Active Military Personnel **Desired Characteristics** : - Strong attention to detail and problem-solving abilities. - Ability to communicate effectively across all levels. - Demonstrated quality, compliance, and customer satisfaction skills. - Possess a desire to learn constantly in every aspect of OWS test operations and expand their knowledge to different technologies and Engine Programs. - Ability to work as part of a team or of their own initiative when required. - Features strong interpersonal, organizational and leadership skills, including problem-solving ability. - Previous commercial high-bypass turbofan engine testing experience including prepping, de-prepping, engine test (test cell or on-wing), line maintenance, engine changes, LRU removal and installation, and troubleshooting. - Proven leadership experience leading initiatives of moderate scope and impact. - Background in or familiarity with SAP, Oasis, or a similar ERP software. - Knowledge of borescope inspection. - Preliminary Review approved. - Designated Inspector. - Engine Test Site Operator. - Equipment operations, i.e., fork truck, overhead crane, transporter & tug. - Humble: respectful, receptive, agile, eager to learn. - Transparent: shares critical information, speaks with candor, contributes constructively. - Focused: quick learner, strategically prioritizes work, collaborative. - Problem solver: analytical-minded, challenges existing processes, critical thinker. Whether we are manufacturing components for our engines, driving innovation in fuel and noise reduction, or unlocking new opportunities to grow and deliver more productivity, our GE Aerospace teams are dedicated and making a global impact. Join us and help move the aerospace industry forward. _This role requires access to U.S. export-controlled information. Therefore, for applicants who are not U.S. lawful permanent residents, U.S. Citizens, or have been granted asylee or refugee status (i.e., not a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3), otherwise known as a U.S. Person), employment will be contingent on the ability to obtain authorization for access to U.S. export-controlled information from the U.S. Government._ **Additional Information** GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** No GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

WHO WE ARE VEG is a rapidly growing emergency company with hospital locations across the United States. Our mission is helping people and their pets when they need it most. We are revolutionizing emergency medicine with a “customer first” mentality and a true, employee-centric work environment. TALENT + CULTURE AT VEG At VEG, we want people and their pets to feel safe, secure, and valued; we want our employees to feel the same way. What we're aiming to achieve on the customer side is equivalent in nature to what we want for our employees: to have the best experience possible. With the highest NPS score in our industry, we're ready to ensure that VEG is always the place where the best and brightest in the emergency world not only want to work, but stay and grow. For our customers and their pets, we strive to find a way to say, “yes.” We do the same and more for our teams. In fact, VEG is one of this year's nominees for INC Magazine's Best Places to Work! ABOUT THE EXTERNSHIP VEG's Veterinary Technician Student Externship Program gives vet tech students hands-on experience in emergency medicine while working alongside our credentialed, emergency veterinary technicians. Students will focus on honing their emergency skills including obtaining patient vitals, processing laboratory samples, caring for hospitalized patients, triaging emerging cases, and collaborating in a fast-paced environment. If you're as interested in emergency medicine as we are, we'd love to have you! Note: This is an unpaid externship and rabies vaccinations are required unless your school's rabies mitigation policy allows you to be unvaccinated and still handle unvaccinated pets. Flexibility: YOU Choose the length of your externship to meet your school's requirements Location: YOU choose where you'd like to extern (depending on hospital bandwidth) Mentorship: YOU will be supported by a credentialed veterinary technician Focus: YOU will be fully-immersed in what emergency medicine truly entails REQUIREMENTS Currently enrolled in an AVMA accredited veterinary technology or veterinary nursing program (or one actively seeking accreditation) and will be in a class that requires externship hours and/or skills. This application is not for veterinary students or veterinary assistant students - only veterinary technology or veterinary nursing students. Your externship must need to begin within 6 months of application. You must be vaccinated for rabies unless your school's rabies mitigation policy allows unvaccinated students to handle unvaccinated animals.

World Acceptance Corporation is excited to host a Software Intern for the summer of 2026. The program will begin in late May and will last 10-12 weeks. This program will be designed to give interns an opportunity to learn and grow while being assigned meaningful work. This is a great opportunity to gain experience with a large organization that believes in possibilities and helps our customers unlock their financial good. You will also be able to further your understanding of multiple business functions in our Downtown Greenville headquarters. As a Software Developer, you will be exposed to all areas related to Software Development. These include but are not limited to: Business Analysis, Quality Analysis and Development Tasks. The Intern will have the opportunity to build relationships across the organization and gain a broad understanding of our business and the financial services industry. Assignments for this Internship may include: Collaborate with department executives to ensure the completion of various company-wide projects. Supporting team members in completion of project tasks such as analyzing data models, software development, conducting unit testing, report writing, and implementing project deliverables. Test web applications to ensure they meet business needs. Work with business units to perform reviews and clean-up of files and data. Education and/or Experience: Must be a rising Junior or Senior level undergrad student, soon to graduate, or an MBA Candidate. Must major in Computer Science, Mathematics, Computer Engineering, or a related field. Minimum 3.0 GPA. Housing/Relocation is not being offered (only local candidates will be considered). Work Environment: Office environment. This job description reflects management's assignment of essential functions; and nothing in this herein restricts management's right to assign or reassign duties and responsibilities to this job at any time. It is the policy of World Acceptance Corporation to provide equal employment opportunity (EEO) to all persons regardless of age, color, national origin, citizenship status, physical or mental disability, race, religion, creed, gender, sex, sexual orientation, gender identity and/or expression, genetic information, marital status, status with regard to public assistance, veteran status, or any other characteristic protected by federal, state or local law. In addition, World Acceptance Corporation will provide reasonable accommodations for qualified individuals with disabilities.

Working at Freudenberg: We will wow your world! Responsibilities: Assist the CF&S R&D team by supporting project work Gain familiarity with the Colback production process Participate in and support production floor trials Gain experience using statistical tools to analyze data Document findings in trial reports, process books, and other forms of documentation Qualifications: At least Sophomore in College Majors: Textile Engineering, Chemical Engineering, Material Science, Polymer Science preferred Good written and verbal communication skills Experience with Project Presentation preferred The Freudenberg Group is an equal opportunity employer that is committed to diversity and inclusion. Employment opportunities are available to all applicants and associates without regard to race, color, religion, creed, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity or expression, national origin, ancestry, age, mental or physical disability, genetic information, marital status, familial status, sexual orientation, protected military or veteran status, or any other characteristic protected by applicable law. Freudenberg Performance Materials LP (USA)