Quality control inspector jobs in Baytown, TX - 297 jobs

About the job QC inspector QC inspectors must possess computer skills and be bilingual. (Pipe Yard) Responsibilities include inspecting incoming and outgoing materials, conducting cycle counts, and maintaining an updated inventory system. Loading and unloading tasks are also required. Qualification: Must have relevant experience. Package Details

IRISNDT is currently seeking a NACE CIP Level 1 and Level 2 Inspectors for a full time, call out positions. The Coating Inspectors shall possess knowledge and skills relating to the application of protective coatings to pipelines, fabricated piping, and storage tanks. The inspector should be familiar with and have experience in applying protective coatings, operating lest equipment, monitoring the application of the coatings, and enforcing company, industry and manufacturers specifications. The inspector must be familiar with safety standards applicable to coating applications as set forth in OSHA Construction Industry Standards. Primary Functions: • Performs assigned routine tests on materials, services in process, or finished projects where results are compared with company quality standards. Reports results to supervisor who will make an analysis and take necessary action. • Inspects visually for obvious defects. • Performs detailed visual inspection when necessary to determine quality of prodcut/service where limits are not clearly defined. Identifies defective work and helps put corrective actions in place. • Records results on inspection forms or charts and reports number of defects found. Posts and maintains forms and charts of inspection data, quality levels, or special quality studies. • May act as quality control department clerk, maintaining all quality records for facility. • Verifies that all materials used in the performance of the job assignment are in compliance with Client Company requirements. • Cooperates and works closely with the Repair/Cut-Out Welding Inspector, NDT and Contractor's Representative to assure that no repairs or cutouts are coated and lowered-in. • Assures that all specifications and safety standards are adhered to. • Records and reports material usage and waste. Qualification & Skill Requirements: High School Diploma or equivalent is required Minimum of two (2) years of experience in the application or inspection of coating in the petroleum or chemical industries, or One (1) year experience in the application or inspection of coating and either NACE CIP level 1 certification or SSPC PC1 level 1 certification. Current NACE CIP Level 1 or Level 2 certification required API 510/570 certifications considered an asset Valid TWIC card required Valid Driver's License and pre-access drug and alcohol testing required Pre-employment background checks will be required Please note: API 1169 Certification is required for all Inspectors by January 1, 2019. Physical Requirements: Move, carry, and lift objects 50 lbs. or more. Must be able to walk, stand, bend, reach, and climb. Must be able to work indoors and outdoors in all weather conditions. Benefits: Dental Insurance. Vision Insurance. Health Insurance. Paid Time Off. 401(K) W/Matching. Flexible Spending Account. Health Savings Account. About IRISNDT: IRISNDT is a tech-enabled value-adding service provider of Non-destructive Testing (NDT), Advanced NDT, Inspection, Asset Integrity Engineering, Software, and Specialized Mechanical Services to the chemical and petrochemical, refining, renewables, power, mining and other diverse end markets in the USA, Canada, the United Kingdom, and Australia. Join IRISNDT to build a promising career. Our dynamic environment offers advanced technology and ongoing learning, placing you at the forefront of industry innovation. We prioritize a strong safety culture and invest in our team, promoting a family-friendly workplace and internal career advancement. With IRISNDT, elevate your career where progress and excellence converge. We boast a team of over 2,000 dedicated staff members worldwide, our growth has been driven by seasoned management, robust technical expertise, and an unwavering commitment to exceeding customer expectations. For more information, visit our website at **************** NOTE: To be considered, applicants must be able provide documentation of current or previous certifications, as well as all classroom and/or on-the-job training (OJT) hours required for certification.

1. Perform in-process and final inspections on fabricated parts, weldments, assemblies, and structural components. 2. Verify dimensions using calipers, micrometers, gauges, tapes, weld gauges, and other precision measuring tools, prepare reports. 3. Review and interpret engineering drawings, welding symbols, fabrication standards, and customer specifications. 4. Review NDE reports, prepare ncr when necessary. 5. Ensure products meet quality standards, customer requirements, and regulatory codes. QUALIFICATIONS: 1. High school education or equivalent. 2. Ability to use appropriate measuring and test equipment. 3. Product familiarity working in a similar environment. TRAINING REQUIRED: 1. Strong attention to detail, accuracy and problem solving skills. Ability to read and interpret engineering drawings and specifications. 2. Performing dimensional inspections. 3. Experience with NDT methods. (VT, MT, PT) 4. Experience working with ITPs, MTRs and fabrication quality documentation PPE AND SAFETY: 1. Follow all shop safety policies, including PPE requirements. 2. Reasonable accommodations are made to enable

Petroleum Inspector Camin Cargo Control is a value-based organization that stands for more than just providing mission critical services. The Company's core principles of fairness, integrity and excellence have been the foundation upon which the organization was built. Fairness: Approach situations in an open, consistent, and ethical manner with fairness, sincerity, and honesty Integrity: Create an empowered, engaging, and accountable culture focused on client service Excellence: Always strive for excellence through continuous process improvement, best practices to achieve superior results and the creation of opportunities to benefit all stakeholders Position Summary Performs sampling, pipeline transfers, inventories and barge inspections including line condition surveys. Performs vessel inspections under the direct supervision of a Senior Inspector. Certifies that field assignments conform to company policies and procedures as well as job specific instructions supplied by the Operations Department. As company field representative, acts in a professional and dignified manner to maintain the company's respected and trusted reputation. Minimum Requirements Requires a High School Diploma (or equivalent) with good math skills and a minimum three months of inspection experience. Must complete Inspector level training and pass corresponding theoretical tests and field evaluations. Must have or obtain IFIA certification after gaining at least six months of industry experience. Must maintain a valid Transportation Worker's Identification Card (TWIC). Possess and maintain a vehicle in good working order, a valid driver's license, vehicle insurance and registration. Must be dependable, able to work independently and be able to effectively communicate and maintain professional relationships with numerous clients (i.e., terminal and vessel/barge personnel). Must pass company defined physical requirements. Must meet and maintain site-specific requirements mandated by customers and/or terminals to have access to all facilities. Responsibilities As instructed by the Operations Department and under the strict guidelines described in the Inspection and ASTM/API manuals: Acts as a Company representative in the field. Must be able to perform duties and responsibilities as per company policies and procedures. Maintains regular contact with Operations Department to receive work orders and schedules. Effectively communicates all aspects of assigned job duties. Maintains regular contact with Operations Department, terminals, and vessel to avoid delays or conflicts. Obtains, labels and transports samples to the laboratory in a timely manner as required by each specific job assignment. Maintains assigned inspection equipment in good working order and ensures equipment is properly calibrated and stored. Measures (gauge and temperature) products and performs all required field calculations per the API Standards, completes all required field documentation and submits reports to the Operations Department in a timely manner. Performs specialized inspection services such as loss control, wall washings or confined space entry upon receiving required training. Assists in the training of Probationary and Junior Inspectors. Fitness for Duty - Physical Demands Workday may consist of 8-12 hours; however, this can vary day to day or shift to shift. Much of the work is performed outdoors, wearing full Personal Protective Equipment (PPE) and could include possible exposure to high and low temperatures for prolonged duration of time. Work may be performed during day or nighttime hours and may involve working alone. All times listed below are approximate. • Maximum Lift-Floor to knee; Knuckle to waist; Waist to shoulder Weight Up to 45 lbs.- Duration/Day Up to 2 hours. • Walking- Weight Up to 45 lbs. -Duration/Day Up to 6 hours • Pushing-Pulling Weight Variable-Duration/Day Up to 2 hours • Carrying Weight Up to 45 lbs.- Duration/Day Up to 4 hours • Ascend/Descend Ladder/Stair Weight Up to 45 lbs.- Duration/Day Up to 2 hours • Extended Reach Weight Up to 45 lbs.- Duration/Day Up to 1 hour • Standing Weight Up to 45 lbs.- Duration/Day Up to 6 hours • Crouch/Squat/Knee Weight Up to 45 lbs.- Duration/Day Up to 1 hour • Tool use Weight 5-8 lbs. Duration/Day Up to 4 hours • Sitting Weight N/A-Duration/Day Up to 6 hours • Driving- Weight N/A- Duration/Day Up to 4 hours All are required to perform this position. This document contains Confidential and Proprietary information which is the property of Camin Cargo Control. None of the information contained herein may be disclosed, reproduced, distributed, or used without prior written consent from Camin. All rights reserved.

The Quality Control Inspector 1 supports the organization in the development, maintenance and execution of a quality control program that will allow the business to continually improve. In addition, the Quality Control Inspector 1 will help ensure that the supply being delivered from vendors and the product being shipped to customers meets the expected standards and specifications. Duties and Responsibilities: Inspect raw materials, machined, welded, and coated parts ordered and received at TEI (TRENDSETTER ENGINEERING, INC) headquarters from vendors and internal machine shop for quality and accuracy. Verify parts received against engineering drawings, specifications, and manufacturing records. Prepare electronic inspection reports for incoming products. Maintain incoming inspection log. Issue, document, and follow up on NCR's. Manage calibrated measuring equipment and certificate log. As necessary, perform other duties, requiring the same level of skill & responsibility. Support any new quality initiatives as required. Be familiar with company HSE (Health, Safety, and Environmental) policies and procedures. Share knowledge & best practice across the company. All other duties as assigned. Qualifications: Associate degree or at least 5 years of previous experience related to quality control inspection, preferably within the oil & gas industry. Advanced skills in dimensional measurement and verification, utilizing all necessary tools. Proficient computer skills and knowledge of Share point and Microsoft 365 required. Ability to demonstrate initiative and assertiveness, plan and organize work in an efficient manner, and work well under stress and time pressures. Strong interpersonal and communications skills, both verbal and written

At Sabre Industries, we connect and power America's communities with world-class utility and telecom solutions. We reliably build a better world together; one customer, one team, and one community at a time. Our teams live out the organization's core values of integrity, commitment, innovation, and connection. That's how we continuously exceed our high standards of enterprise excellence-by creating a space for our engaged employees to thrive. With consistent hiring opportunities nationwide and countless career levels, chances are the next big step on your career path starts here. We work with our employees to create customized career paths and development in all facets of the organization. People will always be our greatest asset, and we place emphasis on enhancing the lives of our employees. Scope of Responsibility: The purpose of this position is to oversee the quality of all galvanized products prior to sending to customers to ensure we are meeting or exceeding customer expectations and to conduct final inspections on customer product to ensure all products are free of uncoated areas, acid spots, lumps, projections, globules, edge tears, spikes or heavy deposits of zinc which will interfere with intended use of the product. Under the direction of the Manager or Shift Supervisor, the QC Specialist provides training, guidance and direction to employees in an efficient, clean, safe and cost-effective manner in order to achieve the goals and key performance metrics in line with the organization's objectives. Essential Duties: * Ensure all galvanized products meet Sabre quality requirements, minimize downtime, and promote efficiency and uptime. * Perform final inspection to ensure all products are free of uncoated areas, acid spots, lumps, projections, globules, edge tears, spikes or heavy deposits of zinc which will interfere with intended use of the product. * Measure the thickness of final product and document according to the quality program guidelines. * Conduct all inspections in accordance with Sabre Galvanizing Work Instructions, SOP's, and associated ASTM specifications with regard to specific customer requirements that may go above and beyond the standard. * Read work orders or receive oral instructions to determine work assignments or material or equipment needs. * Must use good judgment, follow instructions and have good problem-solving abilities. * Relies on instructions and pre-established guidelines to perform the functions of the job. * Excellent attention to detail and strong ability to multi-task. * Train and assess employees' competencies in the Skill-Based Pay process. * Actively seeks and supports continuous improvement activities in process efficiencies, costs and effectiveness of work. * Must have knowledge and demonstrate compliance of all safety guidelines. * Calibrate the mil gauge using calibration blocks and log results. * Record number of units handled or moved, using daily production sheets or work tickets. * Attach identifying tags to product or mark them with proper identifying information as per Work Instruction requirements. * Follow established housekeeping standards. * Additional duties as assigned by Supervisor and/or Management. * Work in your shift as scheduled * Getting along with coworkers * Additional duties as assigned by Supervisor and/or Management. Position Requirements: Education: High School Diploma or GED Equivalent preferred. Experience: Prior Galvanizing and Manufacturing experience required. Experience using forklifts and cranes required. Skills & Abilities: * Knowledge of ASTM Standards required. * Ability to read, write and speak English required. * Must be able to obtain SG Crane/Forklift Certification. * Experience using mil gauge, tape measure, hand file and wire brush highly preferred. Physical Requirements: * Must be able to lift up to 75 pounds. * Must be able to perform physical activities that require considerable use of arms and legs and moving entire body, such as climbing, lifting, balancing, walking, stooping, bending, twisting and handling of materials. * Must be able to work in an outside manufacturing environment for long shifts, including weekends. * Position requires manual dexterity, arm-hand steadiness and a safety-minded individual. * Must be able to work in an open environment exposed to extreme temperatures. * Must have the ability to concentrate on tasks for long periods of time and be able to observe and receive information from all relevant sources At Sabre Industries, we invest in your future with a competitive benefits program. As a full-time employee, you are eligible for: * Medical, Dental & Vision coverage * 401(k) with Company Match * Continuing Education & Tuition Reimbursement * Life and Disability Coverage * Paid Time Off & Paid Holidays * Health and Wellness Resources * Employee Discounts Sabre Industries is an Equal Opportunity Employer: M/F/Vets/Disabled/Sexual Orientation/Gender Identity Revised: 10/24/2024

Job Title -Quality Control Inspector Hourly rate -$28-$33 /Hour on w2 Shift -Monday -Friday from 6: 30am - 3: 30pm, overtime as needed Duration -0-12+ months Description: The Quality Control Inspector plays a key role in ensuring that manufactured components meet all engineering, safety, and quality standards. This position requires strong knowledge of dimensional testing, manufacturing processes, and product functionality. The ideal candidate is detail oriented, technically skilled, and comfortable collaborating across multiple functional groups. Key responsibilities: •Apply knowledge of dimensional testing and manufacturing processes to evaluate product quality. •Review vendor documentation-including Material Test Reports-to verify compliance with engineering specifications. •Perform visual and dimensional inspections of manufactured components using standard inspection equipment. •Utilize inspection tools such as calipers, micrometers, hard gauges, profilometers, optical comparators, and micro hite systems. •Identify, document, and report non conformances for technical authority review and disposition. •Initiate change requests to Engineering when design for manufacturability concerns are identified. •Collaborate with internal functional groups to address and resolve Quality Control-related issues. •Interface with customers, third party representatives, and certifying authorities as required. •Participate actively in Continuous Improvement initiatives to enhance product quality and operational efficiency. Skills & Competencies: •Strong product knowledge and understanding of engineering documentation. •Proficiency with dimensional inspection tools and measurement techniques. •Ability to interpret technical drawings, specifications, and Material Test Reports. •Strong communication skills and the ability to work effectively with cross functional teams. •Detail oriented mindset with a commitment to accuracy and quality. Work Environment: •Fast paced and noisy environment with constant movement. •Regular lifting and/or moving up to to 50 lbs. Qualifications: •High School Diploma or equivalent. •3+ years of related experience in quality control, inspection, or manufacturing.

Inspects finished products, products being processed, incoming materials, parts, and assemblies, etc., for conformance to company standards. **Essential Duties and Responsibilities** + Conduct QC inspections and audits on contract requirements, and other services performed. + Prepares reports, develops quality plans, attends meetings as directed; performs other duties as assigned. + Checks randomly selected samples, and verifies accuracy of equipment or process. + Maintains a safe and healthy work environment by following standards and procedures, complying with legal regulations. Accomplishes quality and organization mission by completing related results as needed. + Schedule inspection activities. **Knowledge, Experience and Skill Requirements** + Knowledge of OSHA standards, NFPA, Joint Commissioning and safety procedures with skills in conducting accident investigations and safety inspections. + Basic knowledge of mechanical systems, critical thinking skills, and proficiency with standard testing tools. + ISO Lead Auditor Certification with a thorough understanding of ISO 9001:2015 standards + Knowledge of recognized and generally accepted good engineering practice regulations and codes. + Excellent analytical and computer skills, specifically in MS Office Suite. + Strong written and oral communication and presentation skills. + Strong teamwork and interpersonal skills **Work Experience** + Up to 2 years of experience of Quality control or an equivalent combination of education and experience sufficient to understand technical and process-based aspects of the services we provide. **Education, Licenses and Certification Required:** + High School Diploma + OSHA Certification _This job description is subject to change by the employer as the needs of the employer and requirements of the job change._ J&J Worldwide Services CBRE Government and Defense Business is thrilled at the opportunity for you to apply to one of our roles. The base salary range for this position is $40,000 to $60,000. This position may also be eligible for a wide range of competitive benefits that can include but not limited to: medical, well-being, financial planning and short-term incentives benefits. Due to compliance requirements imposed by a federal contract, this position may be filled by U.S. Persons only. U.S. Persons includes: U.S. citizens, U.S. nationals, lawful permanent residents, individuals granted refugee status in the U.S., and individuals granted asylum in the U.S. **We maintain a drug-free workplace and perform pre-employment substance abuse testing.** Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights (**************************** notice from the Department of Labor.

/OBJECTIVE The QC Inspector will be responsible for approving incoming, in-process, and finished materials according to Internal and Customer requirements. The QC inspector will also be responsible for creating and documenting inspection results, taking measurements, and tracking non-conforming product. ESSENTIAL FUNCTIONS Reports to QC Leadperson and/or Supervisor for daily activities and workload. Perform and document dimensional and visual checks of production parts and incoming goods and creating inspection reports to internal and customer requirement. Responsible for notifying Quality Control Leadperson and/or Supervisor, in addition to Manufacturing and Engineering personnel, of non-conforming goods. Inspect customer supplied material, per specified drawings. Inspecting and gathering product documentation, final document packets, material heat reports as required. Inspection of buy-out materials. Make First Article inspection and document inspection results. Log and verify traceability packets. Implement and practice Lean Manufacturing tools including 5S, increased productivity, and eliminating waste. Maintain 5S checklist as it applies to your work area. Perform other related duties assigned by QA Manager or QC Leadperson or QC Supervisor. Other Requirements An annual vision examination is required. Must have experience with the use of measuring instruments in the completion of dimensional inspections. (Calipers, micrometers, CMM, Pi tapes, Optical comparators, etc.) Must follow company safety procedures at all times. Must have average reading, writing, and mathematical skills. Must be able to visually inspect materials and manufactured products. Must be able to lift 50 lbs., 3 ft. high. Required Education and Experience High school diploma or equivalent, with 2-3 years of work-related experience. Work Environment This job operates in an office and manufacturing environment. This role routinely uses tools and other such equipment during the course of the job duties. Provided Personal Protective Equipment, as well as steel-toed boots or shoes, must be worn at all times Physical Demands Moderate walking and climbing Physically able to conduct inspections and carry equipment used for inspections Must be able to lift up to 25 pounds at a time While performing the duties of this job, the employee is regularly required to, stand, sit; and stoop Regular, predictable attendance is required Position Type/Expected Hours of Work This is a full-time position, and hours of work and days are Monday through Friday. Occasional evening and weekend work may be required as job duties demand. Travel None EEO STATEMENT Utex Industries is an equal employment opportunity employer and shall make all employment-related decisions without regard to race, color, national origin, ancestry, religion, creed, age, sex, sexual orientation, marital status, military or veteran status, and/or any other status or condition protected by applicable federal, state, or local law. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice.

Job Title: QC Inspector 2 Reports to: QC Supervisor Job Type: Hourly, Non-Exempt SUMMARY: Supports daily operations of the Quality Dept. by performing Quality Control inspection activities as assigned REQUIRED COMPETENCIES Create, Maintain and Organize QA/QC Documentation Work Order Operation Sequence Sign In/Off; account for time on WO Production Part Approval Process (PPAPs) or customer required inspection reports Certificates of Conformance (C of Cs) Dimensional Inspection Reports MTRs, understand and interpret (occasionally) Prepares itemized lists of parts pulled from stock for shipping First article inspection for internal use or as required by customer Inspection and analysis of work in progress and finished parts Sample/Lot inspection of parent & component parts; and final assemblies Assist production/manufacturing in the interpretation of customer quality requirements Able to used appropriately all standard inspection equipment and tools Use and refer for maintenance calibrated tools Upkeep and cleanliness of work areas. Motivated to handle inspection task efficiently Follow company safety & security guidelines Attendance and punctuality are essential functions of this job. Other duties as needed. QUALIFICATIONS To perform this job successfully an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. REQUIRED EDUCATION and/or EXPERIENCE Proficient in the use of typical machine shop measuring instruments Ability to read and interpret manufacturing drawings, prints and specifications Shop Math General Computer skills (Word, Excel) DESIRED EDUCATION and/or EXPERIENCE Experience with ISO and/or other Quality Standards Global Shop (enterprise software) GD&T PHYSICAL DEMANDS Employee may be required to do the following: climbing into and out of equipment; reaching in all directions, handling and manipulating objects and materials; coordinating the movements of eyes, hands, fingers and feet to operate tools and equipment; lifting up to 50 pounds from ground level, waist level, and/or overhead; carrying objects, tools, equipment, etc.; standing; sitting; walking; pushing; pulling; bending; kneeling; crouching/squatting; crawling; seeing with or without correction; hearing with or without correction. The employee is frequently required to sit while performing the duties of this job (approx. 80%) walk (20%) The employee is expected to lift or move materials (5% of workday) MENTAL DEMANDS Employee may be required to do the following: following set procedures and standards; applying basic mathematical skills; planning work and selecting proper tools; reading and interpreting information; judging distances and accurately; following oral and/or written directions; reading; writing; ability to recognize and report safety hazards WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. The noise level in the work environment is moderately loud. The individual who occupies this position must not pose a direct threat to the health or safety of such individual or others in the workplace. This means the individual must not pose a significant risk of substantial harm to the health or safety of the individual or others that cannot be eliminated or reduced by reasonable accommodation. The preceding job description has been designed to indicate the general nature and level of work performed by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities and qualifications required of employees assigned to this job. Duties may be assigned and/or reassigned as needed and/or instructed by department manager, general manager or other supervisor. M / F / Disability /Veteran / EOE **********DRUG FREE WORKPLACE******* FabCorp/Hammonds is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to, among other things, race, religion, color, national origin, sex, status as a protected veteran, or disability.

A Quality Control (QC) Inspector for threaded pipes is responsible for ensuring that the threads on pipes meet specific standards and tolerances. This role involves the utilization of precision gauges and instruments to measure machined threads and the outside diameter of pipes to determine thread height, taper, thread ovality, and other critical dimensions. KEY RESPONSIBILITIES: Setup all hand tools readily accessible to the job being performed Review work order packet for job to verify correct product is to be produced Assure Log Sheets are correct for the product to be produced Coordinate with the Gage Lab for proper gages to measure product Assure gages are mastered and set as required before production starts, as well as during production operation as required Log all measurements for product on to the Log Sheet based on frequency as instructed for product type and Customer Identify all rejected product on Digital Log Sheet and describe reason Identify all rejected physical product as per instructions and alert operator Assure all First and Last Article inspection is conducted as required Alert operator and Supervisor if cause of rejection persists and participates in resolving of reason for rejection Assure that material for order is correct as described on the work order Alert Supervisor and Gage Lab of any concerns regarding performance of gaging or measurement instruments Quality minded individual with a dedication to superior products Follow all applicable work instructions, specifications, and requirements Assist in training of inexperienced inspectors Follow all Company Rules, Procedures and Policies Follow all Company Safety Rules Any other duties as assigned by the Supervisor EXPERIENCE, SKILLS, AND KNOWLEDGE: 1 year experience as production operator/or previous experience as QC inspector in previous company Working knowledge of blueprint reading and basic math. Must be fluent in English, with the ability to read, write, and communicate effectively. Ability to understand and execute instructions well EDUCATION, TRAINING, AND CERTIFICATIONS: High School education or equivalent is preferred CRITICAL COMPETENCIES & CAPABILITIES: Teamwork Adaptability Accountability Reliability/dependability Initiative Safety awareness Ability to receive and provide constructive feedback Pride in performance Continuous Improvement/Quality Communication Positive responses to change High attention to detail

About Wellbore Integrity Solutions Headquartered in Houston, Texas, Wellbore Integrity Solutions (WIS) operates globally in the oilfield services sector, and provides customers with a suite of products, applications, and services on ensuring well integrity throughout the life of the well. We employee more than 1,300 people working across six continents in over 25 countries. If you're looking for an opportunity to build your career in an exciting and inspiring entrepreneurial environment, where your contributions are valued, and you can have a global impact, then come and grow with WIS! We value our relationships with our employees and are committed to creating a high-performance culture that fosters healthy relationships among a diverse team of talented individuals. Primary Responsibilities Quality Control Inspection: Undertake inspections according to our inspection and control plans. Document inspection results. Identify, set aside, and document all suspected or defective products. Return products for repair; confirm repairs and product quality. Operate precise instruments for measuring; maintain and repair instruments, as necessary. Communicate visual and dimensional product quality standards to line operators. Maintain and update quality inspector records. CMM (Coordinate Measurement Machine) Experience and/or certification GD&T (Geometric Dimensioning and Tolerancing) Experience and/or certification Able to set up and properly use all inspection equipment (i.e. bore gauges, micrometers, optical comparators, etc.) Advanced computer and software skills (i.e. Microsoft products, ERP system knowledge, etc) Follow company regulations for a safe and healthy workspace. Minimum Requirements High School Diploma or GED Minimum of 2+ years of combined NDT and full body UT experience with full documentation of prior training, experience and certification. Ability to read blueprints, technical documents, drawings, and diagrams. Required Skills and Competencies Strong communication skills within all levels of the organization, which include verbal, written and nonverbal communication. Dexterity (must be able to stand, bend, reach and quickly remove products during manufacturing) Must have basic math and decision-making skills. Salary & Benefits WIS deeply values fair and equitable wages that enable our employees and their families to thrive. As such, we offer a competitive salary that rewards you for the hard-earned education and experience you bring to the role and increases as you continue to grow and develop. We also prioritize rewarding our employees with benefits that reflect how much we value their contributions. Join us, and you can expect an extensive and generous benefits package, including health insurance, vacation pay based on years of relevant experience not tenure with the company, sick pay, paid holidays, a 401(k)-retirement plan with a 4% employer matching, on-site gym and locker rooms, free parking, and other key benefits. Diversity, Inclusion, and Equal Opportunity We believe that diversity is critical to our mission, and we value an inclusive culture. We strongly encourage applications from people with lived experiences related to our programs and applications from people of color, persons with disabilities, women, and LGBTQ+ individuals. WIS is an equal opportunity employer; we do not discriminate in employment based on race, religious creed, color, national origin, ancestry, physical disability, mental disability, medical condition, marital status, sex, gender or gender identity, age, or sexual orientation.

Role and Responsibilities The Quality Control (QC) Inspector coordinates activities and enforces best-practices as it relates to the overall quality of our product and manufacturing process. The QC Inspector is responsible for receiving inspection of incoming materials, in-process inspections of product, and final inspection of outgoing customer shipments. The essential duties and responsibilities include, but are not limited to: Visual receiving, in-process, and final inspection of product to ensure product conforms to work orders. Developing and maintaining inspection reports including recording actual dimensional measurements using measuring tapes and/or diameter tapes and comparing to work order requirements. Measuring male and female threads, including National Pipe Tapered (NPT) threads, using thread micrometers. Recording and reporting non-conforming product to the Plant Manager for rework. Developing, maintaining, and enforcing current quality control procedures. Verifying completed orders conform to sales order requirements before final shipment preparation. Identifying areas for quality control improvement and implementing new methods in coordination with the Plant Manager. Qualifications and Education Requirements To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Minimum 3 years' experience required in a Quality Control field. Ductile and/or steel pipe industry experience is highly preferred. High School diploma or GED is required. Bachelor's or Associate degree in a related field is an advantage. Preferred Skills Certified Welding Inspector (CWI) is an advantage. Proficient in using measuring hand tools including measuring tapes, diameter tapes, and thread micrometers. Proficient in Microsoft Office software programs including Word and Excel. Ability to develop and maintain records in an organized and efficient manner. Ability to work well with individuals in multiple departments and be detail oriented. Excellent verbal and written communication skills and regard for quality standards. Ductile or steel pipe knowledge is an advantage. Additional Notes Pre-employment drug testing shall be required. All applicants shall be authorized to work in the U.S. COMPENSATION AND BENEFITS After 30 days of employment, employee is eligible for company benefits including medical, dental, vision, sick pay, vacation accruals, and 401(k). 1st Shift

Job Title: QC Inspector Employment Type: Full-Time Shift: 2nd Shift, may require some flexibility and have the ability to work an occasional Saturday. Ultra Corpotech Inc. is a leading manufacturing company that takes pride in producing high-quality products with precision and efficiency. We are committed to a culture of safety, innovation, and growth. Join our team and contribute to our ongoing success as we continue to deliver exceptional products to our clients. Position Overview The QC Inspector will be responsible for ensuring that products meet established quality standards before reaching our customers. This role involves inspecting products at various stages of production, identifying defects, and ensuring compliance with company specifications and regulatory requirements. The ideal candidate will have strong attention to detail, excellent problem-solving skills, and a commitment to maintaining high-quality standards. Key Responsibilities Perform inspections on raw materials, in-process items, and finished products to ensure they meet quality and safety standards Use measurement tools (e.g., calipers, micrometers, gauges) to verify product dimensions and specifications Conduct visual inspections to identify defects such as cracks, deformations, or surface imperfections Document and report inspection results, including any non-conformities, in accordance with company procedures Work closely with production teams to address quality issues and implement corrective actions Maintain accurate inspection records and prepare quality reports Ensure compliance with ISO or other quality standards applicable to the industry Support internal and external audits as needed Perform other duties as assigned by a supervisor, lead person or management Qualifications High school diploma or equivalent. Technical training or certification in quality control/inspection is a plus 3-5 years of experience in quality control or a similar role, preferably in a manufacturing or production environment Skills Proficient in using inspection tools and equipment (e.g., calipers, micrometers, gauges) Strong knowledge of quality control standards and techniques Ability to read and interpret technical drawings and specifications Excellent attention to detail and organizational skills Basic computer skills, including familiarity with MS Office and quality management software Benefits Competitive salary based on experience Health, dental, and vision insurance Paid time off and holidays Opportunities for career advancement and professional development Retirement plan options 401(k) Ultra Corpotech Inc. is an equal opportunity employer and encourages applications from all qualified individuals. We thank all applicants for their interest; however, only those selected for an interview will be contacted. Please note that all offers of employment are contingent upon successful completion of a background check and drug screening. Ultra Corpotech Inc. is committed to maintaining a safe and productive work environment and conducts pre-employment screenings to ensure our standards are met.

About Us: Panelmatic, Inc. was founded in 1957 in Youngstown, OH to serve manufacturing industries with the design and build of custom electrical, instrument, and pneumatic control panels. Our business has sufficiently grown over the years to support expansion for our clients. We have produced control packages for many of America's top corporations in the chemical, environmental, food, pulp and paper, rubber, petroleum, pharmaceutical, glass, metals, and utilities industries. We also deliver equipment for use worldwide. Our rigorous methodology assures compliance with domestic and international standards. We can meet the needs of our diverse clientele from start to finish through sales, design, fabrication, testing, and delivery. Since 1957, we have been known for our high-quality, custom-built control packages, our comprehensive service, and our technological and manufacturing expertise. This expertise assures you of our ability to handle the largest and most complex packages quickly and efficiently. Job Summary: Panelmatic is seeking a detail-oriented experienced Quality Control Inspector. In this role, you'll play a key role in ensuring that all products meet our established requirements for reliability and workmanship, as well as other quality control program standards. Job Duties: * Inspecting output samples using industry-appropriate methods, such as comparing to standards, measuring dimensions, and examining functionality, as well as electrical testing as required. * Checking that the assembly or production line adheres to standards and procedures and complies with legal requirements * Reviewing blueprints, electrical schematics, and specifications to compare to produced goods and generating an inspection report to document all deviations. * Recording inspection results by completing reports, summarizing re-works and wastes, and inputting data into a quality database * Assist in training the production team on quality control measures to improve product excellence * Proposing improvements to the production process * Monitoring the use of equipment to ensure it is safe and discard any that do not meet requirements * Updating job knowledge by engaging in educational opportunities and regular training * Keeping measurement equipment operating accurately by following calibration requirements and calling for repairs * Reading and interpreting engineering drawings and electrical schematics. * Comprehension and operation of basic electrical measuring equipment. * Collecting and compiling statistical quality data * Assisting in the development of test methods and inspection plans * Determining the causes of product defects and reworks * Verifying all equipment is calibrated correctly * Inspection of welded components * Understanding the functionality of basic electrical components for use in industrial electrical cabinets/panels. * Coordination and Support of customers during the FAT process. * Associates degree required * One year of experience with electrical inspection and testing required * One year of experience with fabrication and welding inspection required * Good written and verbal communication skills required * Excellent problem-solving and analytical skills required * Keen attention to detail required * Basic computer and math skills to calibrate and measure specifications required * Ability to use measuring devices such as gauges, meters, calipers, and computers required * In-depth understanding of company standards required * Up-to-date knowledge of federal and industry standards, UL codes, and best practices required * Understanding of target market and consumer needs required * Blueprint and electrical schematic reading capabilities required * Documentation and reporting skills required * Teamwork and collaboration required * Growth mindset with the ability to accept challenges required * Ability to pass physical, drug, driving, and background check required * Ability to physically push, pull, and lift 50lbs or more required * Ability to sit, stand, and walk for four-plus hours at a time required * Alignment with company core values required * Medical, dental, vision, HSA, term life, AD&D, STD, LTD * 100% medical premium paid for by Panelmatic for the employee-only level medical coverage * 80% paid by Panelmatic and 20% paid for by the employee on all other level medical coverage (i.e. employee plus child, employee plus spouse, family) * 401K and bonus * Scholarships, educational reimbursement, paid volunteerism, and paid personal and professional development provided * PTO and paid holidays provided * Career advancement opportunities * Competitive wages * Family-friendly environment with average employee tenure above five years

We are SGS - the world's leading testing, inspection and certification company. We are recognized as the global benchmark for sustainability, quality and integrity. Our 99,600 employees operate a network of 2,600 offices and laboratories, working together to enable a better, safer and more interconnected world. Summary The Petroleum Inspector performs testing of bulk liquid or gaseous hydrocarbon or chemical cargo supervision services, such as but not limited to, gauging, sampling and reconciliation of transfer from shore tank, barge or ship to shore tank, barge or ship. Acts in accordance with Client, SGS Operational Excellence practices and Industry standards. Job Functions Physically samples, measures, and takes the temperature of vessel's tanks and shore tanks utilizing a variety of methods dictated by company and American Petroleum Institute (API) procedures. Follows Safely standards and performs job efficiently. Works within defined technical processes and procedures or methodologies. Calculates and reports quantities of the bulk liquid or gaseous hydrocarbon transferred and performs full reconciliation. Completes all required reports and forms, using the SGS propriety Ship Inspection Report (SIR) and / or Site Acceptance Test (SAT) systems. Works in cooperation with client's representatives, US Customs, vessel personnel, government agents and shore facility personnel. Maintains regular communication with the business unit office staff with reference to job status, problems, concerns, etc. Maintains knowledge and adheres to the latest industry, client and SGS internal standards, policies and procedures. Operates to the highest standards of ethics, in accordance with the SGS Code of Integrity including adhering to all company safety practices. Assists in other branch duties as assigned related to back office support and housekeeping. Performs other duties as assigned. Qualifications Education and Experience High School or equivalent (Required) 6 months to 2 years of transferrable industry experience (Prefered) Completion of internal Inspector Development Program Level (Preferred) Licenses and Certifications Valid Driver's License (Required) Transportation Worker Identification Credential (TWIC) (Preferred) Must maintain valid Driver's License and TWIC card once obtained through course of employment (Required) International Federation of Inspection Agencies (IFIA) Certification (Preferred) Knowledge, Skills and Abilities Continues to gain knowledge and expertise in the profession (Required) Uses existing procedures to solve routine or standard problems (Required) Has no discretion to vary from established procedures by performing structured work assignments (Required) Language Skills: English - Basic level (Required) Mathematical Skills: Basic level of proficiency with a good understanding of fractions and decimals (Required) Reasoning Skills/Abilities: Intermediate level (Required) Communication Skills: Must be able to effectively present information and respond to questions from individuals and/or groups both within the organization or while representing the organization (Required) Flexibility: Must be flexible with ability to accept changes in instructions on short notice (Required) Individual must be dependable and reliable whose daily presence adds to the success of the Department (Required) Must have a positive attitude and show eagerness to accomplish goals and achieve desired results while working independently or in a team setting (Required) Ability to work independently with minimal or no supervision (Required) Ability to work effectively under pressure, while performing numerous projects with different deadlines (Required) Ability to synthesize information from a variety of sources into solutions (Required) Computer Skills MS Office - Basic to Intermediate user proficiency (Required) Physical Demands of the Job Stand: Frequently Move or traverse: Frequently Sit: Occasionally Use hands: Constantly Reach with hands and arms: Frequently Climb or balance: Frequently Stoop, kneel, crouch or crawl: Frequently Talk/hear: Constantly Taste/Smell: Occasionally Lift/carry/push or pull: Frequently 50 lbs Additional Information SGS is an Equal Opportunity Employer, and as such we recruit, hire, train, and promote persons in all job classifications without regard to race, color, religion, sex, national origin, disability, age, marital status, sexual orientation, gender identity or expression, genetics, status as a protected veteran, or any other characteristics protected by law. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily with or without reasonable accommodations. The requirements listed above are representative of the knowledge, skills, and/or abilities required. This job description should not be construed as an exhaustive statement of duties, responsibilities or requirements, but a general description of the job. Nothing contained herein restricts the company's rights to assign or reassign duties and responsibilities to this job at any time. If you are applying for a position within the United States and you have difficulty completing the on-line employment application because of a disability, please call ************ for assistance and leave a message. You will receive a call back. Please note, this phone number is not for general employment information, but is only for individuals who are experiencing difficulty applying for a position due to a disability.

**MasTec Utility Services** delivers critical infrastructure construction and engineering services for power delivery, gas, and water customers, specializing in overhead and underground electric distribution for power delivery systems, gas distribution construction for gas systems, and turnkey solutions for a variety of water, sewer, and civil infrastructure projects. Backed by the strength of decades of experience, unrivaled industry skills, and a deep commitment to core values, MUS delivers safe, innovative, and environmentally responsible services that provide extraordinary value to clients. MasTec Utility Services is a purpose-driven company. Our core values guide our strategy, performance, and culture. We believe in maintaining an environment where team members can make an impact, grow, and thrive. A place where they find meaning and purpose in doing the important work of ensuring communities have the vital energy, light, and communications to prosper. Our culture is inclusive and welcoming. Our teams are empowered with abundant training, tools, and opportunities to follow their curiosity and ambitions. Everyone has an equal chance to advance. Everyone is supported, respected, and challenged to be their best. We're always looking for talented and dedicated people to join us and love where they work. MasTec Utility Services is a proud subsidiary of MasTec (NYSE: MTZ), a Fortune 500 Company ranked by Energy News-Record as one of the leading contractors in the country. MUS is part of the MasTec Power Delivery segment. We are certified as a minority-controlled company by the National Minority Suppliers Development Council (NMSDC). Our rich diversity of people and ideas makes us a stronger, more innovative organization. **Job Summary** The Quality Control Inspector is responsible for providing specialized technical expertise in support of the Quality program, including specialized inspection, testing techniques, quality training, statistical methods, audits, and quality tools for problem-solving and assessment. This position supports the Operations team and works with other team members, senior management, and personnel from all departments. Responsibilities + Complete inspection reports stating the conditions of a work area to ensure requirements are met. + Make recommendations for corrective action. + Apply knowledge of quality systems and tools to validate. + Verify customer specifications are met in project execution. + Implement principles of performance evaluation; prediction methods are used to improve product systems safety, reliability, and maintainability. + Complete documentation necessary to attest to satisfactory completion of inspection or test activities. + Under strict supervision, develop skills and knowledge to determine degree of conformance of products to specifications. + Perform other duties as required and/or assigned. Qualifications + A High School Diploma, or equivalent. + 5 years of related experience. (This exceeds minimums for Quality Control Manager) + Advanced Microsoft Excel skills. + Excellent written and verbal communication skills. + Strong interpersonal skills for interacting with team members and upper management. + Ability to think creatively, highly-driven and self-motivated. + Strong attention to detail, with a track record for leading the team around them to higher levels of operational excellence. + Ability to accurately keep records while managing multiple projects at one time. + Ability to work in a fast paced, high volume work environment. + Ability to read and understand maps, drawings, and diagrams for project build process. + Ability to communicate clearly and maintain a calm and effective demeanor in all circumstances. + Problem solving aptitude. + Ability to work independently with minimal supervision. + Ability to work weekends, holidays, and on-call, as needed. **Physical Demands and Work Environment** This job operates in a field environment. This role routinely requires extended periods of bending, squatting, climbing, kneeling, pushing, pulling, lifting, lifting in awkward positions, standing, and twisting. Also, working in inclement weather conditions, such as extreme heat, extreme cold, rain, ice, snow, and wind. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. This position is physically active, with lifting required. Must be able to bend and lift and carry up to 50 pounds. Clarity of vision at 20 feet or more or 20 inches or less, with the ability to judge distance and space relationships. Precise hand-eye coordination. Ability to identify and distinguish colors. _Please note this is not designed to cover or contain a comprehensive list of activities, duties, or responsibilities that are required of the employee for this job. The Company reserves the right to revise or change the job duties as the need arises. Management reserves the right to change the description, duties, or work schedules to accommodate individuals with disabilities._ Benefits available include Medical, Dental, Vision, Disability and Life insurance, a 401k plan and Employee Stock Purchase plan. MasTec is a publicly traded company MTZ (NYSE). Equal Employment Opportunity: The Company's policy is not to unlawfully discriminate against any applicant or employee based on race, color, national origin, ethnicity, sex, gender, sexual orientation, religion, marital status, age, disability, genetic information, veteran status, or any other basis protected by applicable law and EEOC regulations. The Company also prohibits harassment of applicants or employees based on any of these protected categories. + A High School Diploma, or equivalent. + 5 years of related experience. (This exceeds minimums for Quality Control Manager) + Advanced Microsoft Excel skills. + Excellent written and verbal communication skills. + Strong interpersonal skills for interacting with team members and upper management. + Ability to think creatively, highly-driven and self-motivated. + Strong attention to detail, with a track record for leading the team around them to higher levels of operational excellence. + Ability to accurately keep records while managing multiple projects at one time. + Ability to work in a fast paced, high volume work environment. + Ability to read and understand maps, drawings, and diagrams for project build process. + Ability to communicate clearly and maintain a calm and effective demeanor in all circumstances. + Problem solving aptitude. + Ability to work independently with minimal supervision. + Ability to work weekends, holidays, and on-call, as needed. **Physical Demands and Work Environment** This job operates in a field environment. This role routinely requires extended periods of bending, squatting, climbing, kneeling, pushing, pulling, lifting, lifting in awkward positions, standing, and twisting. Also, working in inclement weather conditions, such as extreme heat, extreme cold, rain, ice, snow, and wind. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. This position is physically active, with lifting required. Must be able to bend and lift and carry up to 50 pounds. Clarity of vision at 20 feet or more or 20 inches or less, with the ability to judge distance and space relationships. Precise hand-eye coordination. Ability to identify and distinguish colors. _Please note this job description is not designed to cover or contain a comprehensive list of activities, duties, or responsibilities that are required of the employee for this job. The Company reserves the right to revise or change the job duties as the need arises. Management reserves the right to change the description, duties, or work schedules to accommodate individuals with disabilities._ Benefits available include Medical, Dental, Vision, Disability and Life insurance, a 401k plan and Employee Stock Purchase plan. MasTec is a publicly traded company MTZ (NYSE). Equal Employment Opportunity: The Company's policy is not to unlawfully discriminate against any applicant or employee based on race, color, national origin, ethnicity, sex, gender, sexual orientation, religion, marital status, age, disability, genetic information, veteran status, or any other basis protected by applicable law and EEOC regulations. The Company also prohibits harassment of applicants or employees based on any of these protected categories. + Complete inspection reports stating the conditions of a work area to ensure requirements are met. + Make recommendations for corrective action. + Apply knowledge of quality systems and tools to validate. + Verify customer specifications are met in project execution. + Implement principles of performance evaluation; prediction methods are used to improve product systems safety, reliability, and maintainability. + Complete documentation necessary to attest to satisfactory completion of inspection or test activities. + Under strict supervision, develop skills and knowledge to determine degree of conformance of products to specifications. + Perform other duties as required and/or assigned.

SHIFT: Day /OBJECTIVE The QC Inspector will be responsible for approving incoming, in-process, and finished materials for defects. The QC inspector will also be responsible for documenting inspection results, taking measurements, and tracking defects. ESSENTIAL FUNCTIONS Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions Reports to QC Lead person for daily activities Perform and document dimensional and visual checks of production parts and incoming goods. Responsible for notifying Quality Control Lead person, in addition to Manufacturing and Engineering, of non-conforming goods. Inspect customer-supplied inserts, per drawings supplied. Ring check and approve production tryouts to engineered tolerances. Inspection of buy-out materials. Make first-piece inspection and document ring checks. Shipping certifications. Log and verify traceability packets. Implement and practice Lean Manufacturing tools including 5S, increased productivity, and eliminate waste. Maintain a 5S checklist as it applies to your work area. Perform other related duties assigned by QA Manager or QC Lead person Other Requirements An annual vision examination is required. Must be able to use measuring devices. Must follow company safety procedures at all times. Must have average reading, writing, and mathematical skills. Must be able to visually inspect materials. Must be able to lift 50 lbs., 3 ft. high. Required Education and Experience High school diploma or equivalent, with 4-5 years of work-related experience. Work Environment This job operates in an office and manufacturing environment. This role routinely uses tools and other such equipment during the course of the job duties. Provided Personal Protective Equipment, as well as steel-toed boots or shoes, must be worn at all times. Physical Demands Moderate walking and climbing Physically able to conduct inspections and carry equipment used for inspections Must be able to lift up to 25 pounds at a time While performing the duties of this job, the employee is regularly required to, stand, sit; and stoop Regular, predictable attendance is required Position Type/Expected Hours of Work This is a full-time position, and hours of work and days are Monday through Friday. Occasional evening and weekend work may be required as job duties demand. Travel None EEO STATEMENT Utex Industries is an equal employment opportunity employer and shall make all employment-related decisions without regard to race, color, national origin, ancestry, religion, creed, age, sex, sexual orientation, marital status, military or veteran status, and/or any other status or condition protected by applicable federal, state, or local law. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

Petroleum Inspector Camin Cargo Control is a value-based organization that stands for more than just providing mission critical services. The Company's core principles of fairness, integrity and excellence have been the foundation upon which the organization was built. Fairness: Approach situations in an open, consistent, and ethical manner with fairness, sincerity, and honesty Integrity: Create an empowered, engaging, and accountable culture focused on client service Excellence: Always strive for excellence through continuous process improvement, best practices to achieve superior results and the creation of opportunities to benefit all stakeholders Position Summary Performs sampling, pipeline transfers, inventories and barge inspections including line condition surveys. Performs vessel inspections under the direct supervision of a Senior Inspector. Certifies that field assignments conform to company policies and procedures as well as job specific instructions supplied by the Operations Department. As company field representative, acts in a professional and dignified manner to maintain the company's respected and trusted reputation. Minimum Requirements Requires a High School Diploma (or equivalent) with good math skills and a minimum three months of inspection experience. Must complete Inspector level training and pass corresponding theoretical tests and field evaluations. Must have or obtain IFIA certification after gaining at least six months of industry experience. Must maintain a valid Transportation Worker's Identification Card (TWIC). Possess and maintain a vehicle in good working order, a valid driver's license, vehicle insurance and registration. Must be dependable, able to work independently and be able to effectively communicate and maintain professional relationships with numerous clients (i.e., terminal and vessel/barge personnel). Must pass company defined physical requirements. Must meet and maintain site-specific requirements mandated by customers and/or terminals to have access to all facilities. Responsibilities As instructed by the Operations Department and under the strict guidelines described in the Inspection and ASTM/API manuals: Acts as a Company representative in the field. Must be able to perform duties and responsibilities as per company policies and procedures. Maintains regular contact with Operations Department to receive work orders and schedules. Effectively communicates all aspects of assigned job duties. Maintains regular contact with Operations Department, terminals, and vessel to avoid delays or conflicts. Obtains, labels and transports samples to the laboratory in a timely manner as required by each specific job assignment. Maintains assigned inspection equipment in good working order and ensures equipment is properly calibrated and stored. Measures (gauge and temperature) products and performs all required field calculations per the API Standards, completes all required field documentation and submits reports to the Operations Department in a timely manner. Performs specialized inspection services such as loss control, wall washings or confined space entry upon receiving required training. Assists in the training of Probationary and Junior Inspectors. Fitness for Duty - Physical Demands Workday may consist of 8-12 hours; however, this can vary day to day or shift to shift. Much of the work is performed outdoors, wearing full Personal Protective Equipment (PPE) and could include possible exposure to high and low temperatures for prolonged duration of time. Work may be performed during day or nighttime hours and may involve working alone. All times listed below are approximate. • Maximum Lift-Floor to knee; Knuckle to waist; Waist to shoulder Weight Up to 45 lbs.- Duration/Day Up to 2 hours. • Walking- Weight Up to 45 lbs. -Duration/Day Up to 6 hours • Pushing-Pulling Weight Variable-Duration/Day Up to 2 hours • Carrying Weight Up to 45 lbs.- Duration/Day Up to 4 hours • Ascend/Descend Ladder/Stair Weight Up to 45 lbs.- Duration/Day Up to 2 hours • Extended Reach Weight Up to 45 lbs.- Duration/Day Up to 1 hour • Standing Weight Up to 45 lbs.- Duration/Day Up to 6 hours • Crouch/Squat/Knee Weight Up to 45 lbs.- Duration/Day Up to 1 hour • Tool use Weight 5-8 lbs. Duration/Day Up to 4 hours • Sitting Weight N/A-Duration/Day Up to 6 hours • Driving- Weight N/A- Duration/Day Up to 4 hours All are required to perform this position. This document contains Confidential and Proprietary information which is the property of Camin Cargo Control. None of the information contained herein may be disclosed, reproduced, distributed, or used without prior written consent from Camin. All rights reserved. Day Schedule: 6 on / 3 off ( 12hr shifts).