Quality control inspector jobs in Channelview, TX

Petroleum Inspector Camin Cargo Control is a value-based organization that stands for more than just providing mission critical services. The Company's core principles of fairness, integrity and excellence have been the foundation upon which the organization was built. Fairness: Approach situations in an open, consistent, and ethical manner with fairness, sincerity, and honesty Integrity: Create an empowered, engaging, and accountable culture focused on client service Excellence: Always strive for excellence through continuous process improvement, best practices to achieve superior results and the creation of opportunities to benefit all stakeholders Position Summary Performs sampling, pipeline transfers, inventories and barge inspections including line condition surveys. Performs vessel inspections under the direct supervision of a Senior Inspector. Certifies that field assignments conform to company policies and procedures as well as job specific instructions supplied by the Operations Department. As company field representative, acts in a professional and dignified manner to maintain the company's respected and trusted reputation. Minimum Requirements Requires a High School Diploma (or equivalent) with good math skills and a minimum three months of inspection experience. Must complete Inspector level training and pass corresponding theoretical tests and field evaluations. Must have or obtain IFIA certification after gaining at least six months of industry experience. Must maintain a valid Transportation Worker's Identification Card (TWIC). Possess and maintain a vehicle in good working order, a valid driver's license, vehicle insurance and registration. Must be dependable, able to work independently and be able to effectively communicate and maintain professional relationships with numerous clients (i.e., terminal and vessel/barge personnel). Must pass company defined physical requirements. Must meet and maintain site-specific requirements mandated by customers and/or terminals to have access to all facilities. Responsibilities As instructed by the Operations Department and under the strict guidelines described in the Inspection and ASTM/API manuals: Acts as a Company representative in the field. Must be able to perform duties and responsibilities as per company policies and procedures. Maintains regular contact with Operations Department to receive work orders and schedules. Effectively communicates all aspects of assigned job duties. Maintains regular contact with Operations Department, terminals, and vessel to avoid delays or conflicts. Obtains, labels and transports samples to the laboratory in a timely manner as required by each specific job assignment. Maintains assigned inspection equipment in good working order and ensures equipment is properly calibrated and stored. Measures (gauge and temperature) products and performs all required field calculations per the API Standards, completes all required field documentation and submits reports to the Operations Department in a timely manner. Performs specialized inspection services such as loss control, wall washings or confined space entry upon receiving required training. Assists in the training of Probationary and Junior Inspectors. Fitness for Duty - Physical Demands Workday may consist of 8-12 hours; however, this can vary day to day or shift to shift. Much of the work is performed outdoors, wearing full Personal Protective Equipment (PPE) and could include possible exposure to high and low temperatures for prolonged duration of time. Work may be performed during day or nighttime hours and may involve working alone. All times listed below are approximate. • Maximum Lift-Floor to knee; Knuckle to waist; Waist to shoulder Weight Up to 45 lbs.- Duration/Day Up to 2 hours. • Walking- Weight Up to 45 lbs. -Duration/Day Up to 6 hours • Pushing-Pulling Weight Variable-Duration/Day Up to 2 hours • Carrying Weight Up to 45 lbs.- Duration/Day Up to 4 hours • Ascend/Descend Ladder/Stair Weight Up to 45 lbs.- Duration/Day Up to 2 hours • Extended Reach Weight Up to 45 lbs.- Duration/Day Up to 1 hour • Standing Weight Up to 45 lbs.- Duration/Day Up to 6 hours • Crouch/Squat/Knee Weight Up to 45 lbs.- Duration/Day Up to 1 hour • Tool use Weight 5-8 lbs. Duration/Day Up to 4 hours • Sitting Weight N/A-Duration/Day Up to 6 hours • Driving- Weight N/A- Duration/Day Up to 4 hours All are required to perform this position. This document contains Confidential and Proprietary information which is the property of Camin Cargo Control. None of the information contained herein may be disclosed, reproduced, distributed, or used without prior written consent from Camin. All rights reserved.

Quality Control CMM Inspector (Night Shift) Shift: Night Shift (Monday - Thursday 4:30PM-3:00AM 10 hr. shift) As a Quality Inspector, you will play a crucial role in ensuring that our products meet or exceed customer specifications and quality standards. You will be responsible for inspecting machined parts, identifying defects, and verifying compliance with engineering drawings and the necessary part numbers and traceability numbers. Job Responsibilities: Perform in-process and final inspections on valve components, machined parts and detailed final assemblies. Perform receiving inspection on incoming product. Proficient in visual and dimensional inspections using all inspection tools for granite plate inspection. Interpret drawings, certifications, and industry specifications. The ability to apply GD&T. Trains and mentors less experienced inspectors. Create inspection reports and maintain accurate records of inspections and findings. Collaborate with production teams to address quality issues and provide feedback for process improvement. Performs other duties as assigned. Follow company instruction in record management including calibration, inspection, and test report. Able to lift to 50 pounds occasionally and be able to use forklift equipment Job requires walking through the campus 80% of time during shift, may be exposed to elements. May perform any other work-related functions as deemed necessary and appropriate by immediate supervisor or manager, as directed. . Skills & Abilities: Ability to interpret mechanical drawings of components and assemblies Knowledge of Geometric Dimensioning and Tolerancing (GDT) required Ability to read and interpret standards and specifications such as ASME, ANSI, NACE, etc. Proficient in MS Office Suite specifically MS Excel, and experience with ERP/MRP systems. Ability to work in a team-oriented environment that is fast paced and demanding. Must be self-directed, have excellent initiative and organizational skills. Exhibits a strong ability to handle multiple demands with a sense of urgency, drive, and energy. Works well meeting multiple deadlines with the ability to deliver on time. Excellent written and verbal communications skills. Core Qualifications: High School diploma or equivalent required. Minimum of five years QC inspection experience of raw material, machined parts, coating, and review of inspection and testing documentations. Minimum of 3 years of experience working in a machining and assembly environment Candidate must have Portable CMM (Faro, Romer) and/or Stationary CMM experience preferred Experience with nonconforming material control and ability to follow company specific instructions and directions. Experience with equipment calibration program. Experience with the review and approval of Certified Material Test Reports with respect to internal and national material specifications/standards. Experience with evaluation for acceptance of inspection and testing reports including Certificate of Conformance, Coating, Welding, Hardness Test, Heat Treat, Liquid Penetrant, Magnetic Particle Testing, Ultrasonic Testing, and Radiographic Testing.

The Quality Control Inspector 1 supports the organization in the development, maintenance and execution of a quality control program that will allow the business to continually improve. In addition, the Quality Control Inspector 1 will help ensure that the supply being delivered from vendors and the product being shipped to customers meets the expected standards and specifications. Duties and Responsibilities: Inspect raw materials, machined, welded, and coated parts ordered and received at TEI (TRENDSETTER ENGINEERING, INC) headquarters from vendors and internal machine shop for quality and accuracy. Verify parts received against engineering drawings, specifications, and manufacturing records. Prepare electronic inspection reports for incoming products. Maintain incoming inspection log. Issue, document, and follow up on NCR's. Manage calibrated measuring equipment and certificate log. As necessary, perform other duties, requiring the same level of skill & responsibility. Support any new quality initiatives as required. Be familiar with company HSE (Health, Safety, and Environmental) policies and procedures. Share knowledge & best practice across the company. All other duties as assigned. Qualifications: Associate degree or at least 5 years of previous experience related to quality control inspection, preferably within the oil & gas industry. Advanced skills in dimensional measurement and verification, utilizing all necessary tools. Proficient computer skills and knowledge of Share point and Microsoft 365 required. Ability to demonstrate initiative and assertiveness, plan and organize work in an efficient manner, and work well under stress and time pressures. Strong interpersonal and communications skills, both verbal and written

We are SGS - the world's leading testing, inspection and certification company. We are recognized as the global benchmark for sustainability, quality and integrity. Our 99,600 employees operate a network of 2,600 offices and laboratories, working together to enable a better, safer and more interconnected world. Summary The Petroleum Inspector performs testing of bulk liquid or gaseous hydrocarbon or chemical cargo supervision services, such as but not limited to, gauging, sampling and reconciliation of transfer from shore tank, barge or ship to shore tank, barge or ship. Acts in accordance with Client, SGS Operational Excellence practices and Industry standards. Job Functions Physically samples, measures, and takes the temperature of vessel's tanks and shore tanks utilizing a variety of methods dictated by company and American Petroleum Institute (API) procedures. Follows Safely standards and performs job efficiently. Works within defined technical processes and procedures or methodologies. Calculates and reports quantities of the bulk liquid or gaseous hydrocarbon transferred and performs full reconciliation. Completes all required reports and forms, using the SGS propriety Ship Inspection Report (SIR) and / or Site Acceptance Test (SAT) systems. Works in cooperation with client's representatives, US Customs, vessel personnel, government agents and shore facility personnel. Maintains regular communication with the business unit office staff with reference to job status, problems, concerns, etc. Maintains knowledge and adheres to the latest industry, client and SGS internal standards, policies and procedures. Operates to the highest standards of ethics, in accordance with the SGS Code of Integrity including adhering to all company safety practices. Assists in other branch duties as assigned related to back office support and housekeeping. Performs other duties as assigned. Qualifications Education and Experience High School or equivalent (Required) 6 months to 2 years of transferrable industry experience (Prefered) Completion of internal Inspector Development Program Level (Preferred) Licenses and Certifications Valid Driver's License (Required) Transportation Worker Identification Credential (TWIC) (Preferred) Must maintain valid Driver's License and TWIC card once obtained through course of employment (Required) International Federation of Inspection Agencies (IFIA) Certification (Preferred) Knowledge, Skills and Abilities Continues to gain knowledge and expertise in the profession (Required) Uses existing procedures to solve routine or standard problems (Required) Has no discretion to vary from established procedures by performing structured work assignments (Required) Language Skills: English - Basic level (Required) Mathematical Skills: Basic level of proficiency with a good understanding of fractions and decimals (Required) Reasoning Skills/Abilities: Intermediate level (Required) Communication Skills: Must be able to effectively present information and respond to questions from individuals and/or groups both within the organization or while representing the organization (Required) Flexibility: Must be flexible with ability to accept changes in instructions on short notice (Required) Individual must be dependable and reliable whose daily presence adds to the success of the Department (Required) Must have a positive attitude and show eagerness to accomplish goals and achieve desired results while working independently or in a team setting (Required) Ability to work independently with minimal or no supervision (Required) Ability to work effectively under pressure, while performing numerous projects with different deadlines (Required) Ability to synthesize information from a variety of sources into solutions (Required) Computer Skills MS Office - Basic to Intermediate user proficiency (Required) Physical Demands of the Job Stand: Frequently Move or traverse: Frequently Sit: Occasionally Use hands: Constantly Reach with hands and arms: Frequently Climb or balance: Frequently Stoop, kneel, crouch or crawl: Frequently Talk/hear: Constantly Taste/Smell: Occasionally Lift/carry/push or pull: Frequently 50 lbs Additional Information SGS is an Equal Opportunity Employer, and as such we recruit, hire, train, and promote persons in all job classifications without regard to race, color, religion, sex, national origin, disability, age, marital status, sexual orientation, gender identity or expression, genetics, status as a protected veteran, or any other characteristics protected by law. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily with or without reasonable accommodations. The requirements listed above are representative of the knowledge, skills, and/or abilities required. This job description should not be construed as an exhaustive statement of duties, responsibilities or requirements, but a general description of the job. Nothing contained herein restricts the company's rights to assign or reassign duties and responsibilities to this job at any time. If you are applying for a position within the United States and you have difficulty completing the on-line employment application because of a disability, please call ************ for assistance and leave a message. You will receive a call back. Please note, this phone number is not for general employment information, but is only for individuals who are experiencing difficulty applying for a position due to a disability.

To be a part of Axial means you'll be joining a company that is positioned to lead the way in the most demanding fastener requirements and environments. Industries we serve include energy, oil and gas upstream and downstream, defense, and heavy industry. We have culture of growth and innovation where we value your growth and development as we collaborate to improve as an American manufacturer. We draw on our extensive experience in multiple industries and markets to solve complicated manufacturing problems for our nationwide and global customers. Axial prizes a team attitude, continual growth as humans and employees, personal ownership and pride of work. Our benefits lead the way and include strenuous safety protocols to put the health and safety of our team first, and a competitive benefits package that includes PTO day 1 of employment, (all insurance), 401k, and shift differential payment. Do you want to join a place that you can make a difference and grow your career? APPLY TODAY! Seeking 2 second shift employees (one experienced, one entry to intermediate) level, 1 first shift position only. Must indicate what shift you are willing to work. Essential Job Functions: Willingness and ability to plan and meet performance and production expectations. Perform receiving, First Article, In-Process and Final Dimensional inspections. Operate various inspection machines and instruments. Ability to read and understand print tolerances. Knowledge, Skills, and Abilities: Should have experience with hardness testing machines and inspection tools. Ability to interpret mechanical drawings. Be able to interpret specification ASTM, ASME, etc. and customer specifications. A willingness and ability to plan and meet performance expectations in a multi-tasking and team-oriented environment. Reliable, dependable, and dedicated to meeting quality and integrity standards. Driven to solve problems and help others. Good math skills and ability to apply logic and reasoning. Good time management skills. Education and Experience: High school diploma or equivalent. 1-2 years prior Inspection or machine operator experience required for entry level operator. 3-5 year prior Inspection or machine operator experience required for middle level operator. 6+ years prior Inspection or machine operator experience required for senior level operator. Physical Requirements: Must be able to work in noisy environments. Must be able to work in environments exposed to seasonal weather conditions. Must be able to lift up to 50 pounds at times. Must be able to bend, stretch, squat, and reach to access all parts of the machine. Pay Range: $16-$24 per hour (based on experience) Differential pay available depending on time and days worked. Employment is contingent upon a successful background check and drug screen. Equal Opportunity Employer; E-Verify Employer

SHIFT: Day /OBJECTIVE The QC Inspector will be responsible for approving incoming, in-process, and finished materials for defects. The QC inspector will also be responsible for documenting inspection results, taking measurements, and tracking defects. ESSENTIAL FUNCTIONS Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions Reports to QC Lead person for daily activities Perform and document dimensional and visual checks of production parts and incoming goods. Responsible for notifying Quality Control Lead person, in addition to Manufacturing and Engineering, of non-conforming goods. Inspect customer-supplied inserts, per drawings supplied. Ring check and approve production tryouts to engineered tolerances. Inspection of buy-out materials. Make first-piece inspection and document ring checks. Shipping certifications. Log and verify traceability packets. Implement and practice Lean Manufacturing tools including 5S, increased productivity, and eliminate waste. Maintain a 5S checklist as it applies to your work area. Perform other related duties assigned by QA Manager or QC Lead person Other Requirements An annual vision examination is required. Must be able to use measuring devices. Must follow company safety procedures at all times. Must have average reading, writing, and mathematical skills. Must be able to visually inspect materials. Must be able to lift 50 lbs., 3 ft. high. Required Education and Experience High school diploma or equivalent, with 4-5 years of work-related experience. Work Environment This job operates in an office and manufacturing environment. This role routinely uses tools and other such equipment during the course of the job duties. Provided Personal Protective Equipment, as well as steel-toed boots or shoes, must be worn at all times. Physical Demands Moderate walking and climbing Physically able to conduct inspections and carry equipment used for inspections Must be able to lift up to 25 pounds at a time While performing the duties of this job, the employee is regularly required to, stand, sit; and stoop Regular, predictable attendance is required Position Type/Expected Hours of Work This is a full-time position, and hours of work and days are Monday through Friday. Occasional evening and weekend work may be required as job duties demand. Travel None EEO STATEMENT Utex Industries is an equal employment opportunity employer and shall make all employment-related decisions without regard to race, color, national origin, ancestry, religion, creed, age, sex, sexual orientation, marital status, military or veteran status, and/or any other status or condition protected by applicable federal, state, or local law. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

Job Details Experienced Geospace Technologies - Houston, TX Full Time Any None Day QA - Quality ControlDescription Perform precision mechanical and electrical inspection/test of custom manufactured and commercial off the shelf parts and assemblies. Will provide inspection support in the areas of incoming quality control, internal first articles and in-process inspections. - Inspect machined/molded parts to assure conformance to engineering drawings and/or other documentation. - Document inspection results using manual and computer-based systems. - Generate Material Non-Conformance reports for items not meeting specifications. - Interface with personnel within the quality department regarding work assignments and priorities. - Interface with personnel in engineering, manufacturing and sales to resolve any issues relating to specifications or non-conformances. - Other duties as assigned by the department lead, supervisor or manager. Qualifications Previous experience in a precision mechanical inspection environment, such as a machine shop, molding shop or other fabrication/manufacturing company.Hands-on experience with common inspection tools such as: - Micrometers - Calipers - Pin/Plug Gages - Ring Gages - Go/No Go Gages - Height Gages - Profile Projectors - Profilometers - Surface Plates - Reading and interpretation of engineering drawings and specifications. - Computer skills, including familiarity with Microsoft Word and Excel. - Strong communication skills, both verbal and written. - Experience in use of and/or programming of automated inspection tools, such as vision inspection systems and CMMs. - Experience working in an ISO 9001 manufacturing environment. Education/Training: Required: High school diploma or equivalent (two years of college preferred), 3 to 5 years' experience in a manufacturing environment as a quality control inspector/technician. Preferred: ASQ Certified Quality Inspector. Working Conditions & Safety Concerns: Operates sophisticated inspection/test equipment in a laboratory and/or shop floor manufacturing environment. Works at a PC station as needed. Assists manufacturing personnel on the floor as needed. Some physical activity required. General safety practices followed, including use of personal protective equipment (PPE) such as safety glasses and steel toe shoes as required. Equal Employment Opportunity: All qualified candidates will receive consideration for all positions without regard to race, color, religion, sex, age, national origin, veteran status, disability, political affiliation, marital status, sexual orientation, or other non-merit factors. Must be able to work without sponsorship/authorization for any employer in the U.S.

Job Details Houston DIS - Houston, TX Full TimeDescription The QA/QC Inspector is responsible for the quality inspection of products manufactured or repaired by Drilling Tools International as well as approved suppliers. The QA/QC Inspector is responsible for adhering to all safety and quality policies for Drilling Tools International, Inc. Education: High School Diploma or GED preferred Experience: 2 years working experience in a Machine Shop or Quality role Machining or QC inspection of API RSC preferred Prior experience in Documentation Control Experience in implementation and auditing of management system requirements established by API Q1 & ISO 9001 preferred. Preferred experience with implementing and/or auditing the requirements of API 7-1 & API 7-2 Specifications Key Responsibilities / Essential Functions of the Position: Develop a strong understanding of the DTI QMS and Safety programs and provide training as required by the DTI Training and Qualification procedure Perform inspections on manufactured parts, in-process inspections and receiving inspection to verify product meets specifications and are free of damage or defects Responsible for Control of Calibrated equipment requirements and ensuring all equipment requiring calibration are kept under control Track NCR's for timely closure and adequate corrective actions Verify that product is manufactured according to specified drawings by performing in-process inspections Perform incoming inspection on selected and identified products Report any product issues to management that may affect functionality Perform, document, and report out on incoming inspections on critical or identified parts Perform other duties and/or special projects as assigned Qualifications Qualifications: Proficient with software applications applicable to the job Ability to read engineering drawings and specifications Prior experience in inspection processes for manufacturing Ability to use inspection tools such as calipers, micrometer, gages Demonstrated oral and written communication skills Strong interpersonal and leadership skills Ability to read and translate drawings, repair procedures and quality documents Basic computer skills in Outlook and Microsoft applications (word, excel, PowerPoint)

As a Quality Inspector, you''be the focal point for all QA/QC assessment for our Flexible Pipe Systems business. Conducting qualitative risk assessments, root cause analysis and providing corrective actions. Supporting QMS system by creating, editing and reviewing documents to be aligned with global standards. As a Quality Inspector, you''be the focal point for all QA/QC assessment for our Flexible Pipe Systems business. Conducting qualitative risk assessments, root cause analysis and providing corrective actions. Supporting QMS system by creating, editing and reviewing documents to be aligned with Baker Hughes global standards. This is for a third shift position (9pm-5: 30am). Training will be on the first and second shifts until training is complete (training timeframe dependent on competencies) -(1st)5am-1: 30pm and (2nd)-1pm-9: 30pm. The plant runs 24/7 so they need coverage 7 days a weeks. The inspector will work a 8 hour shift for 4 to 6 days a week, as dictated by necessity of the plant. Must be available to work weekends, as necessary. Key responsibilities: •Inspecting parts, assemblies and subassemblies to required drawings and prints •Initiating non-conformance reports on all parts and assemblies that are not to drawing and print specifications. •Assuring that manufactured units meet quality control procedures, engineering specifications and customer requirements. •Initiating corrective action requests when conditions adverse to quality are repetitive in nature. •Partnering with manufacturing management and internal process teams to eliminate the causes of quality problems •Completing, inspecting and distributing all quality records and documents and performing specialized testing as required •Verifying tests as required on all components and completed assemblies. •1 x 12 hour shifts this year to provide 24/7 coverage from Monday to Sunday. •Candidate will start on day shift due to training then move to nights. Skills & Competencies: •Be able to read and correctly interpret prints / drawings and specifications •Display understanding of defects, problem-solving skills or an enthusiasm to learn and develop your skill set in a hands-on environment •Have excellent communication skills and the ability to be a valuable team player Work Environment: •Fast paced and noisy environment with constant movement. •Regular lifting and/or moving up to to 50 lbs. Qualifications: •Have a High School Diploma or equivalent level of education •Demonstrate proven experience in a Quality Technician or Inspection role Shifts: •2nd shift: Monday -Friday from 3pm - 3am (12 hour shift for 4 to 6 days a week) •Must be able to work some weekends

Reports to: Quality Control Manager Shift: Mondays - Thursdays 3pm to 1:30am Primary Responsibility: This position is responsible for product quality of the complete MIRATECH product line, in the Houston, Texas What You'll Do: Dimensional Inspection to verify the product matches the sales drawing. This inspection would include but not limited to the following. Diameter, Overall Length, Nozzle Projection, Nozzle Orientation, Test Ports, Couplings, Drains, Etc. Weld Inspection to verify all welding meets or exceeds the weld details on the fabrication drawings. This inspection would include but not limited to. Weld Profile, Weld Size, Weld Length, Porosity, Cracks, Undercut, Inclusions, Excessive Spatter, Etc. Visual Inspection to verify that the finished product meets the overall standards of MIRATECH. This inspection would include but not limited to the following. Paint Defects, Deformation, Defects, Tagging, Labeling, Etc. Labeling / Tagging - verify that all the products all labeled, marked, or tagged with the correct job number and stock code. Maintain job travelers in job packets, inspection reports, test and quality checks. Report any defects, issues, or non-conformities to the Quality Control Manager. Assist with 3rd Party Inspections that are coordinated through the Quality Control Manager. Inspect raw materials in the Non-Conformance Department to verify the following match the Material Traceability Report (MTR) provided by the vendor; Thickness, Specification, Grade, Heat Number, Slab Number, Etc. Calibrate inspection and testing equipment to ensure accuracy and reliability. Ensure that all safety standards are adhered to during inspections and testing. Communicates with other QC Inspectors and takes ownership and initiative. How to Qualify: High school diploma Blueprint interpretation Using measuring tools such as tape measure, micrometer, level, fillet weld gauges, etc. Experience with steel fabrication and welding. Experience with quality related procedures and processes. English and Spanish speaker (preferred). Communication and interpersonal skills to liaise with quality control manager, production supervisor, direct laborers, and cross-functional teams. What's In it For You: Health, Dental & Vision Insurance Annual Bonus Program $350 Annual Wellness Credit Flexible Spending Account (FSA) 401k with match up to 5% Life insurance Disability insurance 4 days of paid sick leave annually 12 days PTO annually (prorated based on start date) $350 Production Reimbursement Program Equal Opportunity: MIRATECH is an equal opportunity employer and supports a diverse and inclusive workforce. All employment practices are based on qualification and merit, without regards to race, color, national origin, ancestry, religion, age, sex, gender identity, sexual orientation or preference, marital status or spousal affiliation, physical or mental disability, medical conditions, pregnancy, status as a protected veteran, genetic information, or citizenship within the limits imposed by federal laws and regulations.

ATTENTION MILITARY AFFILIATED JOB SEEKERS - Our organization works with partner companies to source qualified talent for their open roles. The following position is available to Veterans, Transitioning Military, National Guard and Reserve Members, Military Spouses, Wounded Warriors, and their Caregivers . If you have the required skill set, education requirements, and experience, please click the submit button and follow the next steps. Unless specifically stated otherwise, this role is "On-Site" at the location detailed in the job post. Intertek, a leading provider of quality and safety solutions to many of the world's top-recognized brands and companies, is actively seeking a Petroleum Inspector, with some experience, to join our Caleb Brett team , on site, at our Deer Park facility. This is a fantastic opportunity to start a versatile career in the Inspection and Testing business, with Intertek, a Global and Award winning leader in the ATIC Industry! Intertek Caleb Brett provides specialized Cargo inspection and analytical assessment services to the oil and gas, chemical and other commodities markets. With a global network of laboratories, 24/7 availability, and more than 130 years of exceptional customer service, our customers receive independent inspection and testing with industry-leading customer service. Intertek / Caleb Brett is continually innovating and evolving to reduce risk for consumers, brands and organizations in every sector and industry around the world. We go beyond Testing, Inspection and Certification of products: we are a Total Quality Assurance Provider to industries worldwide. Our Purpose: Bringing quality, safety, and sustainability to life. What are we looking for? The Petroleum Inspector is responsible for Volume measurement, temperature measurement and sampling of commodity materials contained or conveyed in lines, shore tanks, cars, tank trucks and barges and ships. This position will involve traveling to client locations for onsite inspections. Shift/Schedule: Various Shifts, with nights, weekends and holidays, possible Salary & Benefits Information In addition to competitive compensation packages, when working with Intertek you can expect benefits including medical, dental, vision, life, disability, 401(k) with company match, generous vacation / sick time (PTO), tuition reimbursement and more. What you'll do: Volume measurement, temperature measurement and sampling of commodity materials contained or conveyed in lines, shore tanks, cars, tank trucks and barges and ships. Visual inspections on lines, pumps, manifolds, shore tanks, rail cars, tank trucks, barges and ships. Complete custody transfer surveys of commodities transferred to and from rail cars, tank trucks, shore tanks, barges and ships. To perform routine equipment calibration, verification and function checks. To maintain work areas, records and equipment in a clean, organized and functional condition. Understand and adhere to Caleb Brett safety procedures. Able to perform by specified methodology the below duties in addition to completing the associated paperwork. This position outline is a general guideline and does not represent all encompassing details. The position assumes that the incumbent has both the mental and physical requirements to carry out the above defined duties. Minimum Requirements & Qualifications: A valid driver's license and reliable driving record is required Must have basic grasp of basic mathematics and work in an automated environment. Ability to work on an on-call basis Cannot have a fear of heights Model Intertek's 10X Energies at all times within the workplace, practicing business the right way. Physical requirements to include Lifting (25-35 pounds), walking, standing, reaching, bending, stooping, climbing, squatting and driving. Must have or be able to obtain a Transportation Worker Identification Credential (TWIC). Ability to work in a fast-paced, multi-tasking environment with shifting priorities and demanding deadlines. Be able to gauge and sample shore tanks and barges. Be able to calculate shore tanks and barges and know how to interpolate on strapping tables. Set shore stop. Be able to gauge and sample vessels. Be able to strap out vessels using vessel strappings and being able to interpolate. Preferred Requirements & Qualifications: High school diploma, or equivalent preferred Industry Certifications are a PLUS May be some travel, on a volunteer basis

Perform precision mechanical and electrical inspection/test of custom manufactured and commercial off the shelf parts and assemblies. Will provide inspection support in the areas of incoming quality control, internal first articles and in-process inspections. - Inspect machined/molded parts to assure conformance to engineering drawings and/or other documentation. - Document inspection results using manual and computer-based systems. - Generate Material Non-Conformance reports for items not meeting specifications. - Interface with personnel within the quality department regarding work assignments and priorities. - Interface with personnel in engineering, manufacturing and sales to resolve any issues relating to specifications or non-conformances. - Other duties as assigned by the department lead, supervisor or manager. Previous experience in a precision mechanical inspection environment, such as a machine shop, molding shop or other fabrication/manufacturing company.Hands-on experience with common inspection tools such as: * Micrometers * Calipers * Pin/Plug Gages * Ring Gages * Go/No Go Gages * Height Gages * Profile Projectors * Profilometers * Surface Plates * Reading and interpretation of engineering drawings and specifications. * Computer skills, including familiarity with Microsoft Word and Excel. * Strong communication skills, both verbal and written. * Experience in use of and/or programming of automated inspection tools, such as vision inspection systems and CMMs. * Experience working in an ISO 9001 manufacturing environment. Education/Training: Required: High school diploma or equivalent (two years of college preferred), 3 to 5 years' experience in a manufacturing environment as a quality control inspector/technician. Preferred: ASQ Certified Quality Inspector. Working Conditions & Safety Concerns: Operates sophisticated inspection/test equipment in a laboratory and/or shop floor manufacturing environment. Works at a PC station as needed. Assists manufacturing personnel on the floor as needed. Some physical activity required. General safety practices followed, including use of personal protective equipment (PPE) such as safety glasses and steel toe shoes as required. Equal Employment Opportunity: All qualified candidates will receive consideration for all positions without regard to race, color, religion, sex, age, national origin, veteran status, disability, political affiliation, marital status, sexual orientation, or other non-merit factors. Must be able to work without sponsorship/authorization for any employer in the U.S.

A growing machine shop in the League City area is seeking a Dimensional QC Inspector on a direct hire basis. This position will be working in a QC/QA team of about 6-8 employees in performing dimensional inspection an raw materials, in-process parts, and completed parts. Ideal candidate will have 3+ years of quality control inspection experience in a machine shop or similar manufacturing facility, and be well versed on precision measurement devices such as mics, calipers, gauges, etc. Responsibilities This position reports to the Quality Assurance Manager specific responsibilities include: Create Inspection Report Template for new parts, maintain existing inspection report templates Inspects all parts received from OSS Perform first article, in-process, and post fabrication inspections using a variety of precision measurement devices - OD/ID mics, calipers, plug gauges, optical comparator, etc. - must be proficient with both conventional (analog) and digital Supervise or perform engraving when needed Review all Material Test Reports (MTR's) Inspects all completed parts prior to packaging for shipping Supervise packaging to ensure parts aren't damaged after final inspection, and document as needed Sign-off on shipment of parts after packaging inspection and loading is complete. Final Documentation Packets - ensure all required documentation is included in both client packets (ex: inspection reports, pictures, heat-treating certifications, etc.) Support QC and QA managers and other Dimensional QC Inspectors as needed or required. Requirements High School Diploma or GED combined with experience and training, as deemed acceptable by hiring Manager Minimum 3 years' experience in a Manufacturing environment Previous experience with an ERP software is preferred - JobBOSS experience a plus, but not required. Highly experienced with precision measuring instruments (e.g., micrometers, calipers, etc.) and vision inspection systems is highly preferred. Knowledge of ISO 9001 standards, and experience supporting quality and/or ISO audits is a huge plus. Excellent attention to detail and a commitment to maintaining high-quality standards. Ability to work independently as well as part of a team in a fast-paced environment. Strong communication skills for effective collaboration across departments. Additional Information Expected hours: Monday - Friday 7am - 4pm, with some Saturday hours as needed or required Position will be working in a machine shop, shipping & receiving dock, and will have occasional outside work to inspect deliveries or shipments. Benefits available

About Us: Panelmatic, Inc. was founded in 1957 in Youngstown, OH to serve manufacturing industries with the design and build of custom electrical, instrument, and pneumatic control panels. Our business has sufficiently grown over the years to support expansion for our clients. We have produced control packages for many of America's top corporations in the chemical, environmental, food, pulp and paper, rubber, petroleum, pharmaceutical, glass, metals, and utilities industries. We also deliver equipment for use worldwide. Our rigorous methodology assures compliance with domestic and international standards. We can meet the needs of our diverse clientele from start to finish through sales, design, fabrication, testing, and delivery. Since 1957, we have been known for our high-quality, custom-built control packages, our comprehensive service, and our technological and manufacturing expertise. This expertise assures you of our ability to handle the largest and most complex packages quickly and efficiently. Job Summary: Panelmatic is seeking a detail-oriented experienced Quality Control Inspector. In this role, you'll play a key role in ensuring that all products meet our established requirements for reliability and workmanship, as well as other quality control program standards. Job Duties: * Inspecting output samples using industry-appropriate methods, such as comparing to standards, measuring dimensions, and examining functionality, as well as electrical testing as required. * Checking that the assembly or production line adheres to standards and procedures and complies with legal requirements * Reviewing blueprints, electrical schematics, and specifications to compare to produced goods and generating an inspection report to document all deviations. * Recording inspection results by completing reports, summarizing re-works and wastes, and inputting data into a quality database * Assist in training the production team on quality control measures to improve product excellence * Proposing improvements to the production process * Monitoring the use of equipment to ensure it is safe and discard any that do not meet requirements * Updating job knowledge by engaging in educational opportunities and regular training * Keeping measurement equipment operating accurately by following calibration requirements and calling for repairs * Reading and interpreting engineering drawings and electrical schematics. * Comprehension and operation of basic electrical measuring equipment. * Collecting and compiling statistical quality data * Assisting in the development of test methods and inspection plans * Determining the causes of product defects and reworks * Verifying all equipment is calibrated correctly * Inspection of welded components * Understanding the functionality of basic electrical components for use in industrial electrical cabinets/panels. * Coordination and Support of customers during the FAT process. * Associates degree required * One year of experience with electrical inspection and testing required * One year of experience with fabrication and welding inspection required * Good written and verbal communication skills required * Excellent problem-solving and analytical skills required * Keen attention to detail required * Basic computer and math skills to calibrate and measure specifications required * Ability to use measuring devices such as gauges, meters, calipers, and computers required * In-depth understanding of company standards required * Up-to-date knowledge of federal and industry standards, UL codes, and best practices required * Understanding of target market and consumer needs required * Blueprint and electrical schematic reading capabilities required * Documentation and reporting skills required * Teamwork and collaboration required * Growth mindset with the ability to accept challenges required * Ability to pass physical, drug, driving, and background check required * Ability to physically push, pull, and lift 50lbs or more required * Ability to sit, stand, and walk for four-plus hours at a time required * Alignment with company core values required * Medical, dental, vision, HSA, term life, AD&D, STD, LTD * 100% medical premium paid for by Panelmatic for the employee-only level medical coverage * 80% paid by Panelmatic and 20% paid for by the employee on all other level medical coverage (i.e. employee plus child, employee plus spouse, family) * 401K and bonus * Scholarships, educational reimbursement, paid volunteerism, and paid personal and professional development provided * PTO and paid holidays provided * Career advancement opportunities * Competitive wages * Family-friendly environment with average employee tenure above five years

PRE-DELIVERY INSPECTION TECHNICIAN-PORTER Chastang Ford is growing and we need more great people for our amazing team. We are getting vehicles daily and we need energetic, fast-paced people to do state inspections, vehicle check-ins, and accessory installations. We promote from within when we can and this position can be a stepping stone to other positions available in the dealership. Chastang Ford-"The Ford Truck Experts" THE COMPANY The Chastang Family has been involved in the automotive industry since 1933. Our focus is on providing a family atmosphere where our employees, customers, and community thrive. We aim to create a great place to work, learn and grow. * Advancement Opportunities * Transparency with employees and management * Freedom to make decisions * Providing work-life balance THE POSITION: We are to maintain the trust of our customers. We should make sure that their vehicle is ready for delivery. We are careful to maintain the integrity of that vehicle. * Inspect Vehicles off the transport * Report any damage or problems upon inspection of the vehicle * Install all accessories that have been assigned to that vehicle * Ensure vehicles are state-inspected and road ready * Bring vehicles from East Park to the dealership PHYSICAL DEMANDS: * Must be able to drive and operate a motor vehicle. * Must be able to hear and speak clearly to communicate with others. * Must be able to stand, kneel, or crouch for extended periods of time. * Must be able to regularly lift and exert up to 50 pounds of force in order to carry, push, pull, or otherwise move objects. * Must be able to climb into and out of medium-duty trucks * Must be able to perform job functions outside when it rains WORKING CONDITIONS: The successful candidate will be a highly motivated and organized individual. They will be able to work well in a family atmosphere and will take great pride in producing outstanding results and unparalleled quality with a sense of urgency THE LOCATION: Chastang Ford is located in Houston, TX approximately one-mile East of I-69 on the 610 North Loop East. WHY SHOULD YOU APPLY: * Very competitive pay plans * 401k plan with company matching * Dealer covered HAS-Health Saving Account * Dealer covered short-term and, life insurance * Paid Holidays and Birthdays Off * Medical, Dental, and Vision plans * Employee discounts on vehicles, parts, and service work * Training and advancement opportunity * Drug-free work environment

Job Description : For over 75 years, Puffer-Sweiven has set the standard in equipment and services for process control, automation, safety, and reliability. We help process-intensive facilities run more efficiently and safely by delivering quality products, technical support, and knowledgeable staff to implement the needed process solutions - with the goal of exceeding customer expectations. Our dedication brings the most advanced products and services to our customers throughout the Central and Gulf Coast regions of Texas. Specialties: As an Emerson Impact Partner, we offer a broad base of superior solutions including the top product lines for a given application. Our specialties at Puffer-Sweiven include: Process Control & Safety Systems Control Valves & Regulators Isolation Valves & Actuation Oil & Gas Automation Reliability Solutions & Services Pressure Management Specialty Pumps & Rotating Equipment Instrumentation Maintenance & Repair Services Duties and Responsibilities: Inspection & Testing Perform incoming inspections of pressure relief valves to assess condition and identify defects. Verify dimensional accuracy, material specifications, and component integrity after and after repair. Oversee hydrostatic, pneumatic, and functional testing to confirm valve performance. Ensure that all repaired Valves meet all necessary specifications, both physical asset and documentation prior to shipment of the valve to customer; i.e. Final Inspection Repair Oversight Monitor repair activities to ensure adherence to approved procedures and OEM specifications. Validate calibration of tools, gauges, and test benches used in valve repair. Ensure replacement parts meet quality and certification requirements. May communicate with customers directly to discuss specific issues found. Maintain the work area and equipment in a clean and orderly condition. Required to work independent of supervision for after-hours call-outs. Compliance & Documentation Maintain detailed inspection records, test reports, and repair certifications. Ensure compliance with ASME, API, ISO, and other applicable standards. Support audits by regulatory bodies and internal quality teams. Continuous Improvement Identify recurring defects and recommend corrective/preventive actions. Collaborate with technicians and engineers to improve repair processes. Provide training and guidance on quality standards and inspection techniques. Inspects valve and/or actuation assets against inspection forms. Ensures compliance to repair procedures and standards. Initiate non-conformances for assets that fail inspections against inspection forms. Monitor status of open non-conformances and work with Supervisors and Managers to ensure timely action. Escalate Quality Issues to relevant leadership as necessary. Suggest quality and process improvements to leadership. Drive implementation of processes as required. Monitor and report out established KPI's relevant at final inspection, like First Pass Yield % (FPY). QUALIFICATIONS: Education / Experience / Skills Technical diploma or degree in Mechanical Engineering or related field. Minimum 3-5 years of experience in valve inspection, repair, or industrial equipment quality assurance. Strong knowledge of pressure relief valve standards (ASME Section VIII, API 576, NBIC). Proficiency in using precision measuring instruments (micrometers, calipers, gauges). Ability to work non standard hours/after hours. Familiarity with non-destructive testing (NDT) methods is a plus. Strong organizational skills with exceptional attention to detail are required. COMPETENCIES: Ability to safely use and maintain a large variety of tools and equipment, associated with the assembly of relief valves, including impact wrenches, electric and manual hand tools, lapping machines, and overhead cranes and forklifts. Ability to read customer specification sheets and basic dimensional drawings. Ability to read and interpret assembly manuals (i.e. Manufacturers' Spring charts), engineering drawings and technical specifications. Good computer skills. Ability to work independently or as a team member. Ability to work with minimum supervision. Attention to detail and strong analytical skills. Excellent documentation and reporting skills. Strong communication and teamwork abilities. Commitment to safety and regulatory compliance.

SHIFT: Day /OBJECTIVE The QC Inspector will be responsible for approving incoming, in-process, and finished materials for defects. The QC inspector will also be responsible for documenting inspection results, taking measurements, and tracking defects. ESSENTIAL FUNCTIONS Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions Reports to QC Lead person for daily activities Perform and document dimensional and visual checks of production parts and incoming goods. Responsible for notifying Quality Control Lead person, in addition to Manufacturing and Engineering, of non-conforming goods. Inspect customer-supplied inserts, per drawings supplied. Ring check and approve production tryouts to engineered tolerances. Inspection of buy-out materials. Make first-piece inspection and document ring checks. Shipping certifications. Log and verify traceability packets. Implement and practice Lean Manufacturing tools including 5S, increased productivity, and eliminate waste. Maintain a 5S checklist as it applies to your work area. Perform other related duties assigned by QA Manager or QC Lead person Other Requirements An annual vision examination is required. Must be able to use measuring devices. Must follow company safety procedures at all times. Must have average reading, writing, and mathematical skills. Must be able to visually inspect materials. Must be able to lift 50 lbs., 3 ft. high. Required Education and Experience High school diploma or equivalent, with 4-5 years of work-related experience. Work Environment This job operates in an office and manufacturing environment. This role routinely uses tools and other such equipment during the course of the job duties. Provided Personal Protective Equipment, as well as steel-toed boots or shoes, must be worn at all times. Physical Demands Moderate walking and climbing Physically able to conduct inspections and carry equipment used for inspections Must be able to lift up to 25 pounds at a time While performing the duties of this job, the employee is regularly required to, stand, sit; and stoop Regular, predictable attendance is required Position Type/Expected Hours of Work This is a full-time position, and hours of work and days are Monday through Friday. Occasional evening and weekend work may be required as job duties demand. Travel None EEO STATEMENT Utex Industries is an equal employment opportunity employer and shall make all employment-related decisions without regard to race, color, national origin, ancestry, religion, creed, age, sex, sexual orientation, marital status, military or veteran status, and/or any other status or condition protected by applicable federal, state, or local law. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

Petroleum Inspector - II Performs sampling, pipeline transfers, inventories and barge inspections including line condition surveys. Performs vessel inspections under the direct supervision of a Senior Inspector. Certifies that field assignments conform to company policies and procedures as well as job specific instructions supplied by the Operations Department. As company field representative, acts in a professional and dignified manner to maintain the company's respected and trusted reputation. Minimum Requirements Requires a High School Diploma (or equivalent) with good math skills and a minimum three months of inspection experience. Must complete Inspector level training and pass corresponding theoretical tests and field evaluations. Must have or obtain IFIA certification after gaining at least six months of industry experience. Must maintain a valid Transportation Worker's Identification Card (TWIC). Possess and maintain a vehicle in good working order, a valid driver's license, vehicle insurance and registration. Must be dependable, able to work independently and be able to effectively communicate and maintain professional relationships with numerous clients (i.e., terminal and vessel/barge personnel). Must pass company defined physical requirements. Must meet and maintain site-specific requirements mandated by customers and/or terminals to have access to all facilities. Fitness for Duty - Physical Demands Workday may consist of 8-12 hours; however, this can vary day to day or shift to shift. Much of the work is performed outdoors, wearing full Personal Protective Equipment (PPE) and could include possible exposure to high and low temperatures for prolonged duration of time. Work may be performed during day or nighttime hours and may involve working alone. All times listed below are approximate. Maximum Lift-Floor to knee; Knuckle to waist; Waist to shoulder Weight Up to 45 lbs.- Duration/Day Up to 2 hours. Walking- Weight Up to 45 lbs. -Duration/Day Up to 6 hours Pushing-Pulling Weight Variable-Duration/Day Up to 2 hours Carrying Weight Up to 45 lbs.- Duration/Day Up to 4 hours Ascend/Descend Ladder/Stair Weight Up to 45 lbs.- Duration/Day Up to 2 hours Extended Reach Weight Up to 45 lbs.- Duration/Day Up to 1 hour Standing Weight Up to 45 lbs.- Duration/Day Up to 6 hours Crouch/Squat/Knee Weight Up to 45 lbs.- Duration/Day Up to 1 hour Tool use Weight 5-8 lbs. Duration/Day Up to 4 hours Sitting Weight N/A-Duration/Day Up to 6 hours Driving- Weight N/A- Duration/Day Up to 4 hours All are required to perform this position Responsibilities As instructed by the Operations Department and under the strict guidelines described in the Inspection and ASTM/API manuals: Acts as a Company representative in the field. Must be able to perform duties and responsibilities as per company policies and procedures. Maintains regular contact with Operations Department to receive work orders and schedules. Effectively communicates all aspects of assigned job duties. Maintains regular contact with Operations Department, terminals, and vessel to avoid delays or conflicts. Obtains, labels and transports samples to the laboratory in a timely manner as required by each specific job assignment. Maintains assigned inspection equipment in good working order and ensures equipment is properly calibrated and stored. Measures (gauge and temperature) products and performs all required field calculations per the API Standards, completes all required field documentation and submits reports to the Operations Department in a timely manner. Performs specialized inspection services such as loss control, wall washings or confined space entry upon receiving required training. Assists in the training of Probationary and Junior Inspectors. This document contains Confidential and Proprietary information which is the property of Camin Cargo Control. None of the information contained herein may be disclosed, reproduced, distributed or used without prior written consent from Camin. All rights reserved.

We are SGS - the world's leading testing, inspection and certification company. We are recognized as the global benchmark for sustainability, quality and integrity. Our 99,600 employees operate a network of 2,600 offices and laboratories, working together to enable a better, safer and more interconnected world. Summary The Petroleum Inspector performs testing of bulk liquid or gaseous hydrocarbon or chemical cargo supervision services, such as but not limited to, gauging, sampling and reconciliation of transfer from shore tank, barge or ship to shore tank, barge or ship. Acts in accordance with Client, SGS Operational Excellence practices and Industry standards. Job Functions * Physically samples, measures, and takes the temperature of vessel's tanks and shore tanks utilizing a variety of methods dictated by company and American Petroleum Institute (API) procedures. * Follows Safely standards and performs job efficiently. Works within defined technical processes and procedures or methodologies. * Calculates and reports quantities of the bulk liquid or gaseous hydrocarbon transferred and performs full reconciliation. * Completes all required reports and forms, using the SGS propriety Ship Inspection Report (SIR) and / or Site Acceptance Test (SAT) systems. * Works in cooperation with client's representatives, US Customs, vessel personnel, government agents and shore facility personnel. * Maintains regular communication with the business unit office staff with reference to job status, problems, concerns, etc. * Maintains knowledge and adheres to the latest industry, client and SGS internal standards, policies and procedures. * Operates to the highest standards of ethics, in accordance with the SGS Code of Integrity including adhering to all company safety practices. * Assists in other branch duties as assigned related to back office support and housekeeping. * Performs other duties as assigned. Qualifications Education and Experience * High School or equivalent (Required) * 6 months to 2 years of transferrable industry experience (Prefered) * Completion of internal Inspector Development Program Level (Preferred) Licenses and Certifications * Valid Driver's License (Required) * Transportation Worker Identification Credential (TWIC) (Preferred) * Must maintain valid Driver's License and TWIC card once obtained through course of employment (Required) * International Federation of Inspection Agencies (IFIA) Certification (Preferred) Knowledge, Skills and Abilities * Continues to gain knowledge and expertise in the profession (Required) * Uses existing procedures to solve routine or standard problems (Required) * Has no discretion to vary from established procedures by performing structured work assignments (Required) * Language Skills: English - Basic level (Required) * Mathematical Skills: Basic level of proficiency with a good understanding of fractions and decimals (Required) * Reasoning Skills/Abilities: Intermediate level (Required) * Communication Skills: Must be able to effectively present information and respond to questions from individuals and/or groups both within the organization or while representing the organization (Required) * Flexibility: Must be flexible with ability to accept changes in instructions on short notice (Required) * Individual must be dependable and reliable whose daily presence adds to the success of the Department (Required) * Must have a positive attitude and show eagerness to accomplish goals and achieve desired results while working independently or in a team setting (Required) * Ability to work independently with minimal or no supervision (Required) * Ability to work effectively under pressure, while performing numerous projects with different deadlines (Required) * Ability to synthesize information from a variety of sources into solutions (Required) Computer Skills * MS Office - Basic to Intermediate user proficiency (Required) Physical Demands of the Job * Stand: Frequently * Move or traverse: Frequently * Sit: Occasionally * Use hands: Constantly * Reach with hands and arms: Frequently * Climb or balance: Frequently * Stoop, kneel, crouch or crawl: Frequently * Talk/hear: Constantly * Taste/Smell: Occasionally * Lift/carry/push or pull: Frequently 50 lbs Additional Information SGS is an Equal Opportunity Employer, and as such we recruit, hire, train, and promote persons in all job classifications without regard to race, color, religion, sex, national origin, disability, age, marital status, sexual orientation, gender identity or expression, genetics, status as a protected veteran, or any other characteristics protected by law. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily with or without reasonable accommodations. The requirements listed above are representative of the knowledge, skills, and/or abilities required. This job description should not be construed as an exhaustive statement of duties, responsibilities or requirements, but a general description of the job. Nothing contained herein restricts the company's rights to assign or reassign duties and responsibilities to this job at any time. If you are applying for a position within the United States and you have difficulty completing the on-line employment application because of a disability, please call ************ for assistance and leave a message. You will receive a call back. Please note, this phone number is not for general employment information, but is only for individuals who are experiencing difficulty applying for a position due to a disability.