Quality control inspector jobs in Hoover, AL - 45 jobs

The Quality Technician plays a critical role in the quality control processes, ensuring that all products and services comply with rigorous quality and reliability standards. This position involves systematic testing and evaluation of materials and processes, along with data analysis to drive continuous improvement. Job Duties Conduct detailed testing of products and services, utilizing statistical methods to analyze results and generate actionable recommendations for quality enhancement. Ensure all products and services meet specified quality standards and regulatory requirements through rigorous inspection and documentation processes. Proficiently utilize various gaging instruments and measurement systems, ensuring accurate application and calibration to maintain data integrity. Oversee the management, maintenance, and repair of gaging equipment, adhering to industry standards and best practices. Operate and monitor advanced inspection equipment, collecting and analyzing quality data to identify trends and areas for improvement. Procure necessary gaging supplies and equipment, maintaining inventory levels to support ongoing quality assurance activities. Ensure full compliance with relevant regulatory and quality standards, implementing corrective actions as necessary. Recommend modifications to existing quality standards, methodologies, and procedures based on analysis of quality data and industry advancements. Complete all documentation accurately and in a timely manner, ensuring compliance with internal and external audit requirements. Maintain a high standard of workplace organization and cleanliness following 5S methodologies. Adhere to all safety, environmental, and quality policies and procedures, fostering a culture of safety and compliance. Perform additional duties as assigned by management to support the quality assurance team. Experience and Education Computer Experience is required. 3 to 5 years of experience in quality control or a similar technical role within a manufacturing or production environment. Demonstrated ability to work under general supervision, addressing moderately complex issues independently and escalating complex problems to senior staff as needed. In-depth knowledge of quality control methodologies and regulatory compliance standards. Competencies/ Skills Expertise in interpreting technical work instructions and quality specifications. Strong written and verbal communication skills, with the ability to convey technical information clearly. Advanced problem-solving and analytical thinking skills, with a focus on data-driven decision-making. Proficient in the use of gaging instruments, with a strong understanding of their applications in quality measurement.

Atlas is a nationwide leader in civil engineering materials testing and geotechnical consulting services for environmental industrial and infrastructure construction projects Headquartered in Denver CO Atlas currently has over 3500 employees with offices throughout the US including Alaska & Hawaii Its no accident that Atlas creates a better experience for infrastructure and environmental projects Its how we are built with the best people in the industry with the reach and expertise to help at any and every step of the project and with a heart led approach that puts quality and safety at the center of everything we do Were just built to be better We are a great company We are seeking a CEI Level 3 Inspector to join our Birmingham AL team Come join us Job responsibilities include but are not limited to This is skilled sub professional engineering work in the field or office Employees in said class shall act as the Assistant Project Manager and be responsible for reviewing and directing inspection duties of all project inspectors The Senior Inspector shall be capable of surveying and drafting as they apply to documenting and inspection of a construction project The Senior Inspector shall report directly to Project ManagerMinimum requirements Eight years of experience in construction inspection surveying or highway materials testing and inspection or a Bachelor of Science degree in Civil Engineering or Registered Professional Engineer with two years of experience in construction inspection surveying or highway materials testing and inspection One or more of the following certifications as necessary and approved by the Region Engineer Inspectors who are to perform a specific task shall be certified in said field Asphalt Level I Laboratory Technician CertificationAsphalt Level II Quality Manager Technician CertificationCertified Concrete Technician ACI and ALDOT CertificationRoadway HMA Pavement Technician CertificationWork Zone Safety CertificationRadiation Safety Technician CertificationQualified Credentialed Inspector QCIContract Plan Reading CertificationBenefits Atlas offers a comprehensive benefit program to meet the diverse needs of our employees Depending on your employment status Atlas benefits include health dental vision life AD&D voluntary life AD&D disability benefits leaves of absence 401k paid time off paid holidays employee assistance program educational assistance program Who We Are We strive to be the most sought after infrastructure and environmental solutions company known for our unique values driven approach and brought to life by the industrys most exceptional people Atlas provides professional testing inspection engineering environmental and consulting services from more than 100 locations nationwide We deliver solutions to both public and private sector clients in the transportation commercial water government education and industrial markets With a legacy of providing consistent quality and results Atlas creates a better experience at every stage of an infrastructure project We connect the best experts in the industry to deliver value from concept to completion and beyond This means doing everything our clients expect and then raising the expectations in a way that only our people can Our Values Life We enhance quality of life We value people and safety above all else Heart As our hallmarks we act with compassion empathy and respect Trust We work together as partners doing what we say with full accountability Mastery Always striving for the highest quality we ensure greatness inspires all our work Atlas EEOC Statement Atlas is an equal opportunity employer We prohibit discrimination and harassment of any kind based on race color sex religion sexual orientation national origin disability genetic information pregnancy or any other protected characteristic as outlined by federal state or local laws This policy applies to all employment practices within our organization including hiring recruiting promotion termination layoff recall leave of absence compensation benefits training and apprenticeship Atlas makes hiring decisions based solely on qualifications merit and business needs at the time For more information read through our EEO Policy httpswwweeocgovsitesdefaultfiles2023 0622 088EEOCKnowYourRights612ScreenRdrpdf

At STERIS, we help our Customers create a healthier and safer world by providing innovative healthcare and life science product and service solutions around the globe. The Quality Technician is responsible for assisting in administration of the quality functions at a site to assure adherence to ISO 9001, ISO 13485, MDSAP, FDA 21 CFR Part 820/211, EU MDR and other applicable regulatory standards. The Quality Technician supports manufacturing and servicing operations by assisting in performing and documenting problem-solving investigations and conducting in-process sub-assembly and final QC product acceptance testing. Quality Technicians assist in identifying and documenting process and product non-conformances. They work with operations team members to perform and document problem-solving investigations. In addition, Quality Technicians may review device history records, authorize release of finished product/processes and execute calibration and environmental monitoring processes. What You'll Do as a Quality Technician * Assists in production line Quality investigations and associated problem-solving activities. * May coordinate and conduct in-process and final QC product acceptance testing, depending on facility. * Investigates production line stoppages to identify corrective actions. * Identifies and documents product and process non-conformances. * Participates on a Material Review Board to review and process non conformance reports. * Reviews DHR's and supports batch record release. * Enters and retrieves Quality data from local and global systems. * Performs site calibration activities and recordkeeping. * Executes environmental monitoring processes and recordkeeping. * Verifies calculations, dose ranges, dosimeter placements and special instructions prior to processing and part of final product release. * Complete other duties as assigned. The Experience, Skills, and Abilities Needed Required: * High school diploma or equivalent. * Minimum of three (3) years of experience in a manufacturing or repair environment or other technical production tasks with a high school diploma or equivalent. Preferred: * Associate degree * Minimum of one (1) year of experience in a manufacturing or repair environment or other technical production tasks. * Experience with mathematical skills including ratios, proportions and basic algebra. What STERIS Offers We value our employees and are committed to providing a comprehensive benefits package that supports your health, well-being and financial future. Here is a brief overview of what we offer: * Market Competitive Pay with shift differential Climate controlled facility * Extensive Paid Time Off and (9) added Holidays * Excellent Healthcare, Dental and Vision Benefits * Long/Short Term Disability Coverage * 401(k) with a company match * Maternity and Paternity Leave * Additional add-on benefits/discounts for programs such as Pet Insurance * Tuition Reimbursement and continued education programs * Excellent opportunities for advancement in a stable long-term career Pay range for this opportunity is $20.43 - $26.44. This position is eligible for bonus participation. Minimum pay rates offered will comply with county/city minimums, if higher than range listed. Pay rates are based on a number of factors, including but not limited to local labor market costs, years of relevant experience, education, professional certifications, foreign language fluency, etc. STERIS offers a comprehensive and competitive benefits portfolio. Click here for a complete list of benefits: STERIS Benefits Open until position is filled. STERIS is a leading global provider of products and services that support patient care with an emphasis on infection prevention. WE HELP OUR CUSTOMERS CREATE A HEALTHIER AND SAFER WORLD by providing innovative healthcare and life sciences products and services around the globe. For more information, visit *************** If you need assistance completing the application process, please call ****************. This contact information is for accommodation inquiries only and cannot be used to check application status. STERIS is an Equal Opportunity Employer. We are committed to equal employment opportunity to ensure that persons are recruited, hired, trained, transferred and promoted in all job groups regardless of race, color, religion, age, disability, national origin, citizenship status, military or veteran status, sex (including pregnancy, childbirth and related medical conditions), sexual orientation, gender identity, genetic information, and any other category protected by federal, state or local law. We are not only committed to this policy by our status as a federal government contractor, but also we are strongly bound by the principle of equal employment opportunity. The full affirmative action program, absent the data metrics required by § 60-741.44(k), shall be available to all employees and applicants for employment for inspection upon request. The program may be obtained at your location's HR Office during normal business hours.

Why Join Our Team? Do you want to be part of a team that is making a positive difference in lives across the globe? Do you want to be part of a culture where you are recognized, respected, and rewarded for a job well done? U.S. Pipe has been providing quality water and wastewater products since 1899, and for over the past 125 years we have proudly supported local governments, municipalities, water departments, and businesses across the United States, and the world. What We Offer: * Team Collaboration: Join a team-oriented environment where collaboration is not just a buzzword but a priority. * Career Growth: Be part of an industry leader renowned for world-class design, manufacturing, sourcing, and distribution, and take your career to the next level. * Comprehensive Benefits: We provide a comprehensive benefits package with options tailored to meet your needs and those of your family. About the Role: U.S. Pipe is seeking a Quality Control Technician for our U.S. Pipe plant in Bessemer, Alabama. The ideal candidate will be responsible for ensuring that the product meets customer's requirements (both internal and external) at each stage of its manufacturing process, carrying out relevant testing and where necessary take corrective action to rectify non-conformance issues. Report quality issues data, ensuring the Quality Management System is adhered to at all stages. Specific Responsibilities: * Check dimensions of pipe spigots, grind spigots and cut and taper pipe spigots when required. * Ensure that pipe bells are of good quality and within specifications by visual inspection, gauging, and by performing minor salvage work. * Weigh pipe on pipe weighs scales and marks pipe accordingly or applies label. * Perform many or all of the following duties on in-process (WIP) pipe, depending upon the job assignment: visually inspect gauges, record data, calipers, measure, tape, mark, labels. * Perform inspection duties on finished products and accessories (both incoming and outgoing) on the shipping yard. Perform inspection duties on pipe linings at the cement lining facility and general inspection duties on products in the packaging department. * Inspect pipe spigot visually and with calipers to ensure that pipe spigot is acceptable and within specifications. Skills and Qualifications: * High School diploma or GED, basic math skills, and a minimum of 1 year manufacturing experience is required. * Previous foundry knowledge around melting, casting, annealing, inspection and testing procedures is desired.

Mechanical Inspector ***Work Location: Nashville, TN *** Salary: Based on experience and will be discussed with manager in interview Duties/Responsibilities: Provides construction inspection and quality assurance services on multiple or complex mechanical systems projects at an international airport facility. Conducts on-site inspections of HVAC, plumbing, and mechanical systems to ensure compliance with approved construction documents, specifications, and contract requirements. Reviews contractor's work, inspects delivered materials, and verifies certifications. Ensures compliance with approved construction documents, specifications and contract requirements. Records daily observations and reports any noncompliance issues. Coordinates and verifies field testing of mechanical systems and materials. Reviews and approves pay applications related to mechanical work. Reviews contractor's quality control and safety manuals and procedures. Ensures contractor adherence to safety standards and conducts daily safety inspections. Reviews contractor submittals for constructability and compliance with project specifications. Provides technical guidance on mechanical system installations, including HVAC, piping, and equipment. Monitors contractor performance and compliance with mechanical system standards and building codes. Reviews contractor submittals for constructability and compliance. Education/Experience: High school diploma is required or GED Associate degree in Mechanical Engineering, Construction Management, or a related field preferred. Minimum of 5 years of construction inspection experience, focused on HVAC and mechanical systems Experience with mechanical systems, including HVAC, plumbing, and equipment installations. Familiarity with building codes, safety regulations, and mechanical system testing procedures. Certifications in mechanical or HVAC systems preferred. Experience with airport construction projects preferred Familiarity with building codes, safety regulations, and mechanical system testing procedures. Benefits: Competitive salary based on experience. Comprehensive health, dental, and vision insurance. Retirement savings plan with company match. Paid time off and holidays. Professional development and career advancement opportunities. A supportive and collaborative work environment. Equal Opportunity Employer (U.S.) all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, sexual orientation, gender identity, or any other characteristic protected by law. Accura uses E-Verify in its hiring practices to achieve a lawful workplace. *******************

Here at Scotts Miracle-Gro there is no such thing as a typical day. Our culture is constantly energized by new and exciting growth opportunities and at a rapid pace. Below are details on an open job. If the role interests you and you would like to be considered we encourage you to apply! The hourly rate for this position at Scotts/Hawthorne will generally fall between $27.35 - 35.55 per hour and is paid weekly. Scotts/Hawthorne will consider various factors in determining the actual pay including your skills, qualifications, experience, and geographical location. We are looking for a Quality Technician to join our Scotts Miracle Gro team in Vance, AL! The Quality Assurance Technician is responsible for completing shift assignments to support the Quality department in a safety and effective manner. Assignments include performing chemical and physical testing per approved methods; data entry and result reporting; completing line audits, material inspections, and completing other tasks as assigned by the Lead technician or department supervisor or manager. What you'll do in this role: * Execution of chemical and physical analysis per approved methods and protocols. Interpreting results and advising plant operations on results and trends in the data. * Completion of assigned tasks and responsibilities that include any combination of the following: record keeping, LIMS data, SAP entry, product release, instrument maintenance and repair, supply management, safety and operation training, sample collection, audits, and inspections. * Support External analysis, R&D. * Perform housekeeping and safety and environmental tasks. What you'll need to be successful: * High school graduate with three years of experience in a lab setting or with two years advanced training degree. * One to three years of analytical chemistry and instrumentation experience * Previous experience with quality programs desirable.G.C, HPLC,ICP,AA, Leco, Spectrophotometer,Wet Chemistry Experience is preferred. * Knowledge of quality concepts and methods (GLP, ISO,GMP, Lean, Six Sigma) * Knowledge of general analytical testing methods, techniques and instrumentation * Knowledge of laboratory safety regulations * Knowledge of fertilizer chemistry * Ability to make good decisions * Good interpersonal skills with a customer service attitude. * Ability to use SAP software * Ability to provide preventative maintenance and repair to instrumentation * Ability to lift 50 pounds What we do for you (just to name a few cool ones): * Medical, dental, vision, life insurance, holidays, vacation and sick time benefits available within a month of your start date * Healthcare navigation, advocacy and support * 401(k) company match up to 7.5% with immediate participation and vesting * Ability to purchase company stock at a 15% discounted price from market value * $600 annual wellness reimbursement program * Up to $30,000 to help cover the cost of fertility treatments, adoption or surrogacy * Up to 18 weeks of time away to support your growing family * To view all of our great benefits, click here! * Eligibility for the above benefits may vary based on full-time/part-time status or additional factors. Not interested in this role? Stay up to date on future opportunities by joining our ScottsMiracle-Gro and Hawthorne Gardening talent communities. Scotts is an EEO Employer, dedicated to a culturally diverse, drug free workplace. EEO/AA Employer/Minority/Female/Disability/Veteran/Sexual Orientation/Gender Identity Notification to Agencies: Please note that the Scotts Miracle-Gro company does not accept unsolicited resumes from recruiters or employment agencies. In the absence of a signed Master Service Agreement, and specific approval to submit resumes to an approved requisition, the Scotts Miracle-Gro company will not consider or approve payment regarding recruiter fees or referral compensations.

Here at Scotts Miracle-Gro there is no such thing as a typical day. Our culture is constantly energized by new and exciting growth opportunities and at a rapid pace. Below are details on an open job. If the role interests you and you would like to be considered we encourage you to apply! The hourly rate for this position at Scotts/Hawthorne will generally fall between $27.35 - 35.55 per hour and is paid weekly. Scotts/Hawthorne will consider various factors in determining the actual pay including your skills, qualifications, experience, and geographical location. We are looking for a Quality Technician to join our Scotts Miracle Gro team in Vance, AL! The Quality Assurance Technician is responsible for completing shift assignments to support the Quality department in a safety and effective manner. Assignments include performing chemical and physical testing per approved methods; data entry and result reporting; completing line audits, material inspections, and completing other tasks as assigned by the Lead technician or department supervisor or manager.What you'll do in this role: Execution of chemical and physical analysis per approved methods and protocols. Interpreting results and advising plant operations on results and trends in the data. Completion of assigned tasks and responsibilities that include any combination of the following: record keeping, LIMS data, SAP entry, product release, instrument maintenance and repair, supply management, safety and operation training, sample collection, audits, and inspections. Support External analysis, R&D. Perform housekeeping and safety and environmental tasks. What you'll need to be successful: High school graduate with three years of experience in a lab setting or with two years advanced training degree. One to three years of analytical chemistry and instrumentation experience Previous experience with quality programs desirable.G.C, HPLC,ICP,AA, Leco, Spectrophotometer,Wet Chemistry Experience is preferred. Knowledge of quality concepts and methods (GLP, ISO,GMP, Lean, Six Sigma) Knowledge of general analytical testing methods, techniques and instrumentation Knowledge of laboratory safety regulations Knowledge of fertilizer chemistry Ability to make good decisions Good interpersonal skills with a customer service attitude. Ability to use SAP software Ability to provide preventative maintenance and repair to instrumentation Ability to lift 50 pounds What we do for you (just to name a few cool ones): Medical, dental, vision, life insurance, holidays, vacation and sick time benefits available within a month of your start date Healthcare navigation, advocacy and support 401(k) company match up to 7.5% with immediate participation and vesting Ability to purchase company stock at a 15% discounted price from market value $600 annual wellness reimbursement program Up to $30,000 to help cover the cost of fertility treatments, adoption or surrogacy Up to 18 weeks of time away to support your growing family To view all of our great benefits, click here! * Eligibility for the above benefits may vary based on full-time/part-time status or additional factors. Not interested in this role? Stay up to date on future opportunities by joining our ScottsMiracle-Gro and Hawthorne Gardening talent communities. Scotts is an EEO Employer, dedicated to a culturally diverse, drug free workplace. EEO/AA Employer/Minority/Female/Disability/Veteran/Sexual Orientation/Gender Identity Notification to Agencies: Please note that the Scotts Miracle-Gro company does not accept unsolicited resumes from recruiters or employment agencies. In the absence of a signed Master Service Agreement, and specific approval to submit resumes to an approved requisition, the Scotts Miracle-Gro company will not consider or approve payment regarding recruiter fees or referral compensations.

Manufacturing Quality Assurance Project Job INTERVIEW Call ********** Some Quality or Team Leader Experience Great Attention to Detail for Quality Assurance Full Time 40 Hours a Week Located 20 Miles from Arab 1st Shift 8am to 4pm 8 Hour Shifts Weekly Paid 40 hours = 660 Add 8 hours OT = 858 Each company is different you will be trained Bluetooth can be used while working PPE: Shorts, Capris, Long Pants, T-Shirt NO Steel Toes are Required INTERVIEW CALL **********

The Quality Inspector I, works independently as part of the Quality team inspecting parts. It is the responsibility of the Quality Inspector to communicate inspection results to management as well as Research and Development and Materials Management. Responsibilities: Inspect device components and finished devices follow inspection instructions and established procedures Communicate inspection results to Quality supervision or management as well as R&D / Engineering and Materials Management Filing quality documents and records and maintaining quality files Requirements: Previous hand-held inspection instruments (micrometer, calipers, etc.) preferred Experience with computerized record-keeping (e.g., documents, drawings) preferred Computer literacy with standard software applications, and demonstrates excellent reading, writing and verbal communication skills Requires vaccination against Hepatitis B or signed declination form High school diploma or certificate required 1+ years of Quality Inspection experience preferred

Substation Quality Inspector II Experience Level: 5+ Years Industry: Utilities / Substation / Civil Construction Contract- 3 Years Client- Alabama Power The Substation Quality Inspector II is responsible for supporting quality assurance and inspection activities on substation civil and construction projects. This role focuses on field-based inspections, verification of construction activities, and ensuring work aligns with approved plans, specifications, and industry standards. The ideal candidate has strong field experience in surveying, grading, and civil construction, is comfortable working on active job sites, and communicates effectively with construction teams, engineers, and project leadership. Key Responsibilities Review and interpret grading plans, drawings, and soil/geotechnical reports Perform field inspections to verify construction quality and compliance with project requirements Support quality control and documentation activities on substation construction sites Communicate inspection findings clearly through written reports and verbal updates Coordinate with construction crews, survey teams, and project management Utilize surveying equipment including robotic instruments, GPS, and data collectors Maintain organized inspection records and field documentation Support continuous improvement of quality and inspection processes Work from a field office or job site, as required Required Qualifications Minimum 5 years of surveying experience using: Robotic instruments GPS systems Data collector instruments Experience reading and interpreting grading plans and soil reports Proficiency with Microsoft Office (Outlook, Word, Excel) Strong oral and written communication skills Ability to work independently as a self-starter Strong organizational, interpersonal, and time-management skills Proficiency with computers and/or iPad for field documentation and reporting Ability to work full-time in a field office or active job site environment Preferred Qualifications Previous experience in civil construction, preferably supporting substation projects Familiarity with utility construction standards and field inspection practices Work Environment Field-based role on substation construction sites Combination of outdoor work and field office documentation Requires comfort working in varying site and weather conditions

Quality Inspector Classification: Exempt Reports to: Quality Manager Direct Reports: NA The Quality Inspector is responsible for performing random inspections in manufacturing departments for in-process and final inspection verification purposes. Performing mini audits throughout the facility to ensure proper identification of raw and finished goods in accordance with the lot traceability and control procedures. Essential Functions/Duties Perform all duties with a safety-first mindset Perform random inspections in manufacturing departments to ensure products are being manufactured correctly according to work orders and drawings provided. Ensure that each department is inspecting parts properly using gages and instruments available. Review in-process inspection records and confirm results recorded by machine operators. Perform mini-audits to ensure lot traceability is maintained throughout the manufacturing process - ensure that every bin or pallet of in-process material always has proper identification back to the work order. Perform mini audits of raw material to ensure each mill tag displays a label to show that it has been properly inspected prior to use. Make sure all gages and instruments used in manufacturing processes are in calibration and if not, bring them to the quality lab to bring current. Work closely with other members of the quality team as well as manufacturing as required to ensure production of high-quality products. Perform other tasks as instructed by quality manager or quality engineer. Competencies Ability to maintain positive relations within all levels of the organization. Ability to communicate, present facts and provide recommendations effectively in oral and written form. Strong organizational skills that reflect the ability to perform and prioritize multiple tasks seamlessly with excellent attention to detail. Proven ability to handle confidential information with discretion, adapt to various competing demands, and demonstrate the highest level of service and response. Ability to work effectively with or without direct supervision as well as independently or in a team environment. Ability to maintain a high degree of professionalism while under pressure and in the face of adversity Work under critical deadlines and heavy workloads to support the critical functions of the company. Ability to prioritize and work with accuracy under stress. Must have a solid working knowledge in Microsoft Word, Excel and Outlook applications. Physical/Cognitive Demands Cognitive abilities required include deductive reasoning, information ordering, oral comprehension, oral expression, problem sensitivity, written comprehension, and written expression. Position Type/Expected Hours of Work This is a full-time position. Required Education and Experience HS Diploma/GED 2 years experience performing quality inspections preferred in manufacturing environment Proficient in MS Office programs, especially MS Excel Preferred Education and Experience N/A Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time, with or without notice.

Construction Materials Testing (CMT) Technician Thompson Engineering is seeking qualified Construction Materials Testing (CMT) Technicians for multiple locations. This position is responsible for the daily oversight of construction materials testing and inspection activities on active construction sites to ensure compliance with project specifications, industry standards, and quality requirements. Ideal candidates will demonstrate flexibility and a willingness to travel across multi-states to various job sites as needed. Key Responsibilities * Perform field testing of construction materials using a 40-pound nuclear density gauge * Obtain concrete samples from ready-mix trucks and prepare concrete test cylinders * Conduct concrete testing and transport samples to the laboratory for further analysis * Collect, document, and deliver soil samples from job sites to the laboratory * Observe construction activities and accurately record performance data * Perform visual inspections of reinforcing steel (rebar) * Maintain detailed daily field diaries documenting project activities * Prepare and submit daily reports and required documentation to the Team Leader in accordance with project specifications * Ensure quality and quantity standards are met on all assigned work * Proactively review project documents and testing procedures to understand technical requirements * Communicate professionally and ethically with clients, contractors, and team members * Maintain company-owned equipment in safe, proper working condition * Report any required corrective actions to the Team Leader to ensure work quality meets company standards * Follow all written procedures, company policies, and safety requirements * Complete field activities and reports accurately and in a timely manner * Perform all duties in a professional, ethical manner Additional Responsibilities * Establish personal goals for continuous improvement and job performance * Maintain reliable, punctual, and regular attendance * Attend and actively participate in safety meetings and training programs * Perform other duties as assigned Qualifications Minimum Requirements * High school diploma or equivalent * Minimum of six (6) months of construction materials testing experience * ACI Level I Certification (or ability to obtain) * Nuclear Gauge Certification * Ability to communicate effectively both verbally and in writing * Valid driver's license * Ability to read and write in English * Willingness to travel to various job sites as required * Level and compensation commensurate with experience Physical Requirements * Ability to work flexible schedules and overtime as required by operational needs * Ability to lift and carry a minimum of 50 pounds * Ability to safely operate a company vehicle * Ability to push or pull up to 400 pounds using a wheelbarrow * Ability to walk, stoop, bend, climb stairs and ladders * Ability to work on uneven terrain including concrete, gravel, dirt, and grass * Ability to work at elevated heights and in open structures * Ability to work outdoors for extended periods in varying weather conditions * Ability to wear required personal protective equipment (PPE) About Thompson Engineering Founded in 1953, Thompson Engineering provides quality assurance and professional services for construction projects supporting industrial, infrastructure, and community development. Our services include drilling, materials testing, construction inspection, chemistry laboratory services, engineering design, environmental assessments, surveying, geotechnical studies, and construction management. Today, Thompson Engineering is recognized for leadership on projects that define skylines, coastlines, and transportation networks across the Southeast. From project planning and design through construction and completion, we deliver innovative solutions to complex infrastructure and building challenges for industrial, commercial, transportation, federal, and municipal clients.

Join our Team: Quality Technician Birmingham, AL Join our team at Terex Utilities and embark on an exciting opportunity as we seek a skilled and dedicated Quality Technician to contribute to the Terex team in Birmingham, AL. At Terex we believe in fostering a vibrant and inclusive work culture where every person is empowered to thrive. We're dedicated to driving quality, innovation, embracing diversity, and creating an environment where everyone feels valued and respected. We're committed to excellence in everything we do, and we're seeking talented individuals who share our passion and values to join our team. What you'll do • Safe and positive approach to daily standard work. • Proficient in reading blueprints, schematics and other types of engineering/manufacturing drawings. • Understanding of precision measurement equipment and applications. • Experienced with Microsoft Excel, Word, and PowerPoint. • Basic understanding of iPads/digital applications. • Highly proficient in communicating problems and solutions to leadership, internal and external customers, and with other departments and plants. • Must be familiar with weld inspection methods used by Terex Utilities at the various facilities. • Ability to investigate problems, determine root cause, and suggest or implement effective solutions. • Must have a desire to make a difference, make long-term changes to Terex Utilities Quality. • Ability to train the Terex Utilities team on Quality Standards and Customer Requirements. • Perform Audits/Inspections at specified Quality gates. • Write non-conformances and notify correct departments • Issue red tags • Help identify and drive internal quality and safety improvements • Work with operations team to resolve issues and put in countermeasures to prevent future reoccurrences. Improve/modify test procedure as required. • Other Job duties as assigned What you'll bring • High School Diploma and/or equivalent experience • 2-3 years of proven experience in Assembly/Installation, Testing, or Inspection. • Possess good mechanical aptitude • Effectively communicate with all team members • Function as a team member and contribute to group goals while maintaining a positive attitude. • Work independently with minimal supervision in a responsible manner • Recognize potential safety hazards and take appropriate actions to minimize risks • Maintain the integrity of confidential business and product information • Demonstrate acceptable attendance for company standard; provides adequate notification; aware of impact on organization • Take initiative to recognize areas of opportunity and resolve with appropriate action • Identify problems, work towards root cause elimination utilizing appropriate problem-solving methods • Demonstrate excellent leadership skills • Help others where needed, backs up others • Willingness to be flexible to learn new skills based on the need of the company • Consistently performs to Takt Time or quoted time. • Meets established metrics by performing quality work in accordance to SOPs for the area with minimal errors • Work to improve processes within their work area - uses appropriate tools to find and eliminate waste and to reduce overall business costs • Continuously search for new and better ways of doing things; challenges the status quo and sets stretch goals; works across boundaries to achieve common goals; strives to continuously improve oneself Why Join Us • We are a global company, and our culture is defined by our Values - Integrity, Respect, Improvement, Servant Leadership, Courage, and Citizenship. Check out this video! The Terex purpose. • Safety is an absolute way of life. We expect all team members to prioritize safety and commit to Zero Harm. • Our top priority is creating an inclusive environment where every team member feels safe, supported, and valued. • We make a positive impact by providing innovative solutions, engaging our people, and operating in a sustainable way. • We are committed to helping team members reach their full potential. • Through innovation and collaboration, our vision remains forward-looking, and we aim to be a catalyst for change, inspiring others to build a better world for generations. • We offer competitive salaries, health insurance (medical, dental, vision, Rx), life insurance, accidental death & dismemberment (AD&D), short-term and long-term disability, extended leave options, paid time off, company holidays, 401k matching, employee stock purchase plan, legal assistance, wellness programs, tuition reimbursement and discount programs. For more information on why Terex is a great place to work click on the link - Careers | Terex Corporate The compensation range for this position is $22.00-$23.50 per hour. Pay is based on several factors including but not limited to education, work experience, certifications, etc. This above description is non-exhaustive and there may be additional duties in accordance with the role. If you are interested in an open position but feel you may not meet all the listed qualifications, we still encourage you to apply. About Terex: Terex Corporation is a global industrial equipment manufacturer of materials processing machinery, waste and recycling solutions, mobile elevating work platforms (MEWPs), and equipment for the electric utility industry. We design, build, and support products used in maintenance, manufacturing, energy, minerals and materials management, construction, waste and recycling, and the entertainment industry. We provide best-in-class lifecycle support to our customers through our global parts and services organization, and offer complementary digital solutions, designed to help our customers maximize their return on their investment. Certain Terex products and solutions enable customers to reduce their impact on the environment including electric and hybrid offerings that deliver quiet and emission-free performance, products that support renewable energy, and products that aid in the recovery of useful materials from various types of waste. Our products are manufactured in North America, Europe, and Asia Pacific and sold worldwide. Additional Information: We are passionate about producing equipment that helps improve the lives of people around the world and providing our team members with a rewarding career and the opportunity to make an impact. We are committed to recruiting, engaging, developing, and retaining team members at all levels of our global workforce. Our culture is defined by our Terex Way Values - Integrity, Respect, Improvement, Servant Leadership, Courage, and Citizenship. Our values are the driving force behind our commitment to maintain an inclusive, supportive, non-discriminatory, and safe workplace for all team members. To that end, we are committed to actively foster a culture where every team member feels valued, listened to, and appreciated. We are committed to being fair and impartial in our decisions. As an Equal Opportunity Employer, employment decisions are made without regard to race, color, religion, national origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. If you are a qualified individual with a disability, including disabled veterans, you may request a reasonable accommodation if you are unable or limited in your ability to access job openings or apply for a job on this site as a result of your disability. You can request reasonable accommodations by contacting the recruiting department (person or department) at ********************************** . The Company offers competitive salaries, advancement opportunities, and a full range of benefits, including paid vacation, 401(k), medical, dental, and vision.

Starting rate $18.00 - $24.00 per hour, based on experience!! Plus shift differential!! Air Conditioned Plant!! Are you interested in a new career? We may be looking for you! Valtir is hiring a Quality Inspector in our Pell City, AL plant! As a Quality Inspector at Valtir, you will make visual and measured inspection of products to ensure conformance with standards and determine if product meets all requirements. You may inspect incoming materials or plates, outgoing materials, or fittings and weld throughout the manufacturing process. The inspector may apply singular inspection process, such as hydrostatic tests, and perform x-ray, destructive, and non-destructive examination to verify specified dimensions, strengths, and other quality factors using measuring instruments and inspection equipment. The inspector may also perform magnetic particle inspection. Valtir is a Tier Above in safety and innovation as a leading manufacturer of highway guardrail, highway guardrail end treatments, temporary and permanent crash cushions, truck-mounted attenuators, and cable barrier systems. Monday - Thursday 4:30pm - 3:00am What you'll do: • Ensure quality procedures and policies are being followed • Conduct shop Inspections in a timely manner • Work with shop personnel and supervisors to improve overall effectiveness of Quality System • Monitor welders to ensure they are welding within the welding parameters • Responsible for verification of all calibrations of tools used for inspection to include welding machines. • Responsible for monitoring welding wire for storage • Make sure all quality records are being completed and procedures followed • Work well with employees on the shop floor and have a good working relationship with supervisors • Issue Non-conformances or Corrective actions • Process tags, completed assemblies and products • Inspections of subcomponents during fabrication What you'll need: • Relevant experience in manufacturing processes • Must possess good interpersonal skills • Demonstrates the ability to work with others efficiently and effectively either one-on-one, as a team or in a group • Must possess a positive attitude with self-motivation • Must be able to communicate effectively • 6 months experience in manufacturing processes with minimal knowledge in a quality function Competitive Benefits & Programs: In addition to a thriving workplace environment, a comprehensive benefits package is provided for our employees including: Medical and Health Reimbursement Account Dental and Vision Insurance Maternity/Parental Paid Leave Short-Term & Long-Term Disability Life Insurance 401(k) Plan with Company Match Professional Development Employee Assistance Program Wellness Programs Vacation, Holiday and Sick Pay Bonus Opportunities

TRIGO Global Quality Solutions has several immediate openings for Quality Inspectors in Vance, AL. Pay Rate is $14.00 Days / $15.00 Nights. Overall Purpose of the Quality Inspector Provide Quality services and support for all missions assigned to a manufacturing or warehouse site while ensuring a healthy and safe work environment. Reports to Site Supervisor/Site Leaders Responsibilities (To include but not limited to the following) Client Relationship & Business Development Act as an impartial third party between the production source and the customer facility to ensure the product meets set criteria Operations Check/inspect manufactured parts or products for defects Read and follow work instructions and general processes Use measuring or testing equipment as needed Ensure products meet quality standards Display excellent customer service Must comply with local and company Health & Safety legislation, laws, and policies Organization & Management Collect and record data Technical Utilize company portal for time recording and policy acknowledgements Other Any other duties as assigned Knowledge, skills, abilities Hard skills Good communications skills Must be able to multi-task Ability to work in a fast-paced environment Ability to handle sensitive and confidential material Ability to walk and stand for long periods of time Ability to bend, lift, twist and move freely Ability to periodically lift/move up to 50 pounds Must have reliable transportation Values & attitudes Global team spirit Team player Caring for people Open-minded Excellence Reactive Resilient to pressure Rigorous Customer focus Client oriented Reliable & trustworthy Flexible Initiative Autonomous Innovative Daring Work experience Overall recommendations No experience necessary Ability to read blueprints a plus Education background Overall recommendations High School Diploma or Equivalent recommended or comparable work experience TRIGO16 About TRIGO Global Quality Solutions Founded in 1997, TRIGO is a multinational company providing operational Quality Management solutions for the manufacturing sector, especially in the automotive and aerospace industries. With a team of more than ten thousand professionals present in 20+ countries across 4 continents, TRIGO offers a comprehensive portfolio of Quality Assurance services ranging from inspection to expert auditing, consulting and training. The unrivaled expertise, industrial mindset and extensive global footprint that TRIGO has built up over the last 3 decades has made TRIGO the leading quality solutions provider using the latest innovative and reliable digital systems and standard processes, delivering results in the most demanding industries. TRIGO has recently started to expand its clientele by offering quality services to the medical, chemical and food industries. TRIGO Global Quality Solutions is committed to the core values of equal employment opportunity. We are committed to treating people fairly, and with respect and dignity. We offer employment opportunities based upon an individual's qualifications and performance, free from discrimination or harassment because of race, ancestry, place of origin, ethnic origin, color, citizenship, creed, sex, sexual orientation, age, marital status, family status, and disability.

TRIGO Global Quality Solutions has several immediate openings for Quality Inspectors in Vance, AL. Pay Rate is $14.00 Days / $15.00 Nights. Overall Purpose of the Quality Inspector Provide Quality services and support for all missions assigned to a manufacturing or warehouse site while ensuring a healthy and safe work environment. Reports to Site Supervisor/Site Leaders Responsibilities (To include but not limited to the following) Client Relationship & Business Development * Act as an impartial third party between the production source and the customer facility to ensure the product meets set criteria Operations * Check/inspect manufactured parts or products for defects * Read and follow work instructions and general processes * Use measuring or testing equipment as needed * Ensure products meet quality standards * Display excellent customer service * Must comply with local and company Health & Safety legislation, laws, and policies Organization & Management * Collect and record data Technical * Utilize company portal for time recording and policy acknowledgements Other * Any other duties as assigned Knowledge, skills, abilities Hard skills * Good communications skills * Must be able to multi-task * Ability to work in a fast-paced environment * Ability to handle sensitive and confidential material * Ability to walk and stand for long periods of time * Ability to bend, lift, twist and move freely * Ability to periodically lift/move up to 50 pounds * Must have reliable transportation Values & attitudes Global team spirit * Team player * Caring for people * Open-minded Excellence * Reactive * Resilient to pressure * Rigorous Customer focus * Client oriented * Reliable & trustworthy * Flexible Initiative * Autonomous * Innovative * Daring Work experience Overall recommendations * No experience necessary * Ability to read blueprints a plus Education background Overall recommendations * High School Diploma or Equivalent recommended or comparable work experience TRIGO16 About TRIGO Global Quality Solutions Founded in 1997, TRIGO is a multinational company providing operational Quality Management solutions for the manufacturing sector, especially in the automotive and aerospace industries. With a team of more than ten thousand professionals present in 20+ countries across 4 continents, TRIGO offers a comprehensive portfolio of Quality Assurance services ranging from inspection to expert auditing, consulting and training. The unrivaled expertise, industrial mindset and extensive global footprint that TRIGO has built up over the last 3 decades has made TRIGO the leading quality solutions provider using the latest innovative and reliable digital systems and standard processes, delivering results in the most demanding industries. TRIGO has recently started to expand its clientele by offering quality services to the medical, chemical and food industries. TRIGO Global Quality Solutions is committed to the core values of equal employment opportunity. We are committed to treating people fairly, and with respect and dignity. We offer employment opportunities based upon an individual's qualifications and performance, free from discrimination or harassment because of race, ancestry, place of origin, ethnic origin, color, citizenship, creed, sex, sexual orientation, age, marital status, family status, and disability.

Purpose: To oversee the audits of process and products within the department to which they are assigned. This includes control plan audits and the verification of data taken on a daily basis to verify that process controls are being utilized Qualifications: High School Diploma or GED 3+ years' experience working in a manufacturing environment preferred Knowledge: Business Writing General Computer Operation Manufacturing Concepts High School Diploma Proficient in computer operation Proficient in Microsoft Office Applications preferred Good Communication Skills Planning and organizational skills Main Tasks: Interface with quality engineering functions to secure documentation needed for successful audits Daily process audits designed to verify the process controls in use are being utilized and functioning Process Audits Ensure specifications are met according to the Control Plan in assigned area Create and Follow up on Quality Alerts Assist with Containment when defects occur Download reading into the color care software Advise the color harmony team when the readings are out of tolerance Responsible for measuring orange peel and gloss using the Wave scan and Gloss meters Assist the Color Technicians when needed Perform related office and clerical functions such as, data entry and filing.

Quality Control focuses on process control and providing accurate feedback to internal customers. Responsible for the effective management and/or day-to-day supervision of quality control and inspection. Responsible for following implemented of standards, methods and procedures for inspecting, testing and evaluating the precision, accuracy, efficacy and reliability of products. Responsible for usage of software, hardware, materials, parts, and products to ensure adherence to established standards of quality. Responsible for defined product sampling and checks for non-conformity. Executes required inspections defined by sampling plans for product conformity with a focus on Customer satisfaction. Essential Duties and Responsibilities include, but are not limited to: • Inspect parts to ensure conformity to the customer requirement and to industry standards. These inspections include dimensional, visual, material handling, workmanship, paint applications, free of all FOD • Utilize various measuring tools, which includes manual measuring instruments, CMMs, mylars, visual measuring systems, etc. • Prepare, update, and inspect Company and Customer inspection records for accuracy, communicating as needed, clearly and concisely. • Actively contributes to a culture of continuous improvement • Other duties as assigned Qualifications: Experience and Education: 1-2 years of relevant experience High school degree or equivalent, plus advanced training Technical Skills: Excellent attention to detail Working knowledge of customer specifications and requirements Basic computer skills Problem solving abilities Strong verbal and written communication skills Ability to use measuring equipment Ability to work both individually and in a team environment Understand and obey safety requirements Commitment to keep work area clean and free of debris Physical Requirements: Must be able to lift and/or move up to 50lbs Specific vision abilities include close and distance vision, depth perception and ability to adjust focus Ability to use hands to finger, handle, or feel, as well as reach with hands and arms for extended periods of time o Capable of standing for long periods Supervisory Responsibilities: None. Travel Required: N/A Note: This job description in no way states or implies that these are the only duties to be performed by the employee(s) of this position. Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. All duties and responsibilities are essential functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the employee(s) will possess the skills, aptitude, and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety to themselves or others. The requirements listed in this document are the minimum levels of knowledge, skills, or abilities. This document does not create an employment contract, implied or otherwise, other than an at will relationship. Affirmative Action/Employment Opportunity (EEO) Statement: ALIGN PRECISION is an equal opportunity employer and values diversity at our company. We are committed to creating a workplace where all qualified individuals are welcome and can thrive, regardless of race, religion, color, national origin, gender, sexual orientation, gender identity, age, marital status, veteran status, disability status, or any other characteristics protected by law.

Stark Exterminators is looking to hire a full-time Termite Inspector to provide uncompromised service to our residential or commercial pest control customers . This is a production-based position that leads the industry in potential earnings. Our Technicians enjoy a company vehicle and other benefits including: generous time off, 11 paid holidays, 401(k) with company match, Roth IRA, medical, dental and vision insurance, high deductible HSA, telemedicine, disability, cancer, and accident insurance. health & wellness suite company-paid + additional, optional, life insurance. If you are interested in building a long-term career in a stable industry, apply today! A DAY IN THE LIFE AS A TERMITE INSPECTOR As a Termite Inspector, you are excited to start your route each day. You will perform a thorough inspection and evaluation of customer properties for Wood Destroying Organisms and other pest problems. You will properly identify insects, pest harborage areas, and conducive conditions while determining opportunities for additional services. Your ability to propose and sell services will supplement your earnings with commissions. Each day is an opportunity to represent StarkExterminators in the communities that you serve. Your customer service and commitment to excellent service will maintain the reputation we have for going beyond the call and creating an awesome experience in every interaction. ABOUT OUR FAMILY OF BRANDS Stark Exterminators is part of the Arrow Exterminators family of brands. We have been a family-owned and operated business since our start in 1964. Over the years, we have grown rapidly, and we now have the privilege of servicing 12 states. To ensure the quality and satisfaction of our customers, we have several offices in each state we are in to offer a more personalized approach to our communities. Ranked by revenue, Atlanta-based Arrow Exterminators is the sixth-largest pest and termite control company in the United States! We instill family values in the company culture to create a welcoming work environment and a successful company. We attribute our success to passionate, highly trained team members who are committed to protecting everyone's quality of life. As Arrow grows and exceeds industry expectations, we are always looking for new talent to bring on board. We know our team has a lot of options and we are humbled that they choose to work with us. That's why we offer competitive compensation, a robust benefits package, and a family-oriented company culture. QUALIFICATIONS High school diploma or equivalent Possess current Driver's License Ability to pass and maintain any state regulatory agency-required licensing/certification exams Ability to work at least 40 hours per week No experience necessary! We will train the right person. ARE YOU READY TO JOIN OUR TEAM? If you feel that you would be right for this position, please fill out our initial 3-minute, mobile-friendly application so that we can review your information. We look forward to meeting you! #StarkExterminators We are an Equal Opportunity Employer (The job description is not an exhaustive statement of all the duties, responsibilities, or qualifications of the job, nor is it intended to limit opportunities for necessary modifications). Stark Exterminators as a PestVets Company is committed to hiring and participating in acts of service for Veterans and active-duty members of the U.S. Military. Stark Exterminators is a Drug-Free Workplace and performs Pre-employment Drug Screens and Background Checks on all employees