Quality engineer jobs in Belleville, NJ - 605 jobs

Crane Aerospace and Electronics has an exciting opportunity for a Quality Managerat our West Caldwell, NJ location. About Crane: Crane Aerospace & Electronics supplies critical systems and components to the aerospace and defense markets. You'll find Crane Aerospace & Electronics in some of the toughest environments: from engines to landing gear; from satellites to medical implants and from missiles to unmanned aerial systems (UAS). Every time you use phone navigation, make a bank transaction or have food delivered to your home, Crane Aerospace & Electronics Microwave product is hard at work. Located in the tight-knit, family-first West Caldwell, NJ., community, our West Caldwell facility supplies industry-leading microwave components and systems for use in space, defense and commercial applications, including GPS III satellites. With more than 60 years of expertise, our Microwave group has proven capabilities in major military, communications, electronic warfare, radar and satellite systems. Start the next chapter of your career with Crane Aerospace & Electronics! Job Summary: The Quality Manger is responsible for establishing, implementing and directing quality assurance efforts to ensure components and other materials in finished goods and products conform to quality standards based on the requirements and expectations of the organization and customer. Essential Functions: • Management, training and mentoring of all Quality Department employees at site level • Lead problem solving Kaizen events • Manage budget, costs and expenditures within the Quality function and applicable functional support requirement. • Responsible for investigation of and formal response to all customer complaints(SCARS) • Responsible for failure analysis & corrective action reporting system(FRACAS) • Participate in internal and external quality audits • Any other task assigned by your supervisor or management Minimum Qualifications: • Experience: 5+ years Quality assurance experience in the defense, space electronics or high end aerospace industry in either a management role or senior quality engineering position; Experience with Lean and Six Sigma methodologies • Knowledge: Expert knowledge of Quality Management Systems as well as Process Improvement and Control Techniques; Demonstrated knowledge of manufacturing best practices, process control (SPC, Six Sigma), logistics processes (inventory management), engineering management (project management) and safety management • Skills/Abililties: Demonstrated strong analytical and problem solving skills; Effective written and verbal communication skills and interpersonal skills; Ability to manage through influence; Abilty to demonstrate a strong sense of urgency • Education/Certification: B.S. degree in electrical or mechanical engineering, or related field Preferred Qualifications: • Certified ISO/AS lead assessor credentials Working Conditions: • Standard office environment • Work requires substantial visual concentration on detail • Working conditions are normal for a manufacturing environment • Manufacturing operations may require the use of safety equipment to include but not limited to: eye safety glasses, gowning, masks, hearing protectors, heel/wrist straps and any other required PPE • May be exposed to unusual environmental conditions such as loud noises, cold temperatures, confined spaces, dust or fumes • Travel up to 10% may be required Standing: 30% *percentage is approximate and may vary depending on work task Sitting: 70% *percentage is approximate and may vary depending on work task Lifting (in pounds): up to 25 pounds Pushing (in pounds): up to 25 pounds Mental/Visual: use of computer, calculator, filing cabinets Workspace: cubicle/desk Crane Co. reserves the right to change or assign other duties to this position. The statements contained herein reflect general details as necessary to describe the principal functions of this job, the level of knowledge and skill typically required and the scope of accountability and responsibility. These descriptions should not be considered to be all-inclusive listings of work requirements. Crane Co. is an Equal Opportunity Employer and does not discriminate on the basis of race, color, creed, religion, sex, national origin, marital status, age, sexual orientation, gender identity characteristics or expression, physical or mental disability, pregnancy, medical condition, genetic information, or U.S. military or veteran status or any other characteristic protected under federal, state, or applicable local law, in recruiting, hiring, training and promoting Salary range: $132,020.70 - $162,894.20. Several factors contribute to actual salary, including experience in a similar role or performing comparable job responsibilities, skills, training, and other qualifications. Some roles may be eligible for participation in performance-based bonus programs. This description has been designed to indicate the general nature and level of work being performed by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of employees assigned to this job. Crane Company. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, color, religion, gender, sexual orientation, general identity, national origin, disability or veteran status.

Experience Requirements: Life Sciences Degree or related discipline Minimum x (8) years of collective experience in quality management. 4 years in pharmaceuticals, or biotechnology. Demonstrate knowledge of TGA, FDA, and EU GMP and other quality related systems (e.g., ISO Standards, ICH, PIC/s) Job Purpose: Accountable for providing QA Ops management of contractors to ensure compliance with quality and cGMP/cGTP standards, oversight of ongoing manufacturing campaigns and introduction of new product lines

Stellen-ID: 3126879 | Amazon.com Services LLC Amazon Logistics (AMZL) is searching for a Sr PE Innovation Engineer to take the AMZL Process Engineering Innovation team to the next level. Our logistics teams are changing the way we interact with customers around the globe every single day and solving some of the biggest logistical challenges facing not just Amazon, but the entire industry. We are looking for an experienced, customer-obsessed Engineer to join the Amazon Logistics WW Process Engineering Team. This Engineer will be responsible for driving change, large-scale business communications, mitigating risks to plan, goal tracking, data delivery and governance, process improvement, and other ad-hoc projects that drive efficiency and reduce risk across the PE Innovation portfolio for Process Engineering. The right candidate can influence without authority and present to senior leadership. They will be a strong advocate for the team and will work hand-in-hand with key stakeholders in developing and growing strategic relationships, both internally and externally, as well as creating and streamlining internal processes. The Engineer will strive for service excellence, and drive centralization and adoption of our mechanisms with all global stakeholders. This highly visible, cross-functional role will require effective collaboration and efficient communication with multiple teams (Product, Tech, Program, Finance, Legal, SMEs, Local Ops, GP, etc.) and global stakeholders. The right candidate is proactive in understanding and communicating critical business needs, and knows how those translate into solutions. This person must have experience building long-term, strategic relationships, and becoming influential partners. This position requires heavy verbal and written communication on status, risks and our sourcing pipeline. This role is a great fit for a professional team-player who is flexible, and very comfortable with ambiguity. The successful applicant will merge a strong technical depth with bar raising communication skills. The Engineer will possess a strong business and project management background, and is able to thrive and succeed in an entrepreneurial environment, and not be hindered by opposing priorities. They will not only successfully develop and drive programs across teams, but is willing to roll up their sleeves, dive into the weeds to get the job done, focusing on the data and details to ensure the right inputs are top of mind for our customers and stakeholders. To be successful in this role you will need to be able to influence and work with senior leaders across multiple organizations and geographies. You will work with organizations such as Worldwide (WW) Engineering and Design, WW Tech SME, Last Mile Delivery and Tech as well as Operations to innovate at scale and drive the development roadmap. Key job responsibilities Handle a high volume of requests, engagements and interactions in fast paced environment Track existing and set up new metrics as required to validate vendor and team performance Develop and implement performance improvement plans, working cross-functionally with internal and external stakeholders Report on performance in weekly and monthly forums with partner teams and senior leadership Set measurable targets that align with the overall goals of the organization Comprehend the technical requirements of our internal customers and become an expert in field Influencer: Innovative pioneer with the ability to identify opportunities and influence organizations to gain support and overcome resistance with data and persuasion. Significant experience overseeing partner teams through good judgment, making and data. Doer: Ability to successfully deliver end-to-end technology and vendor operations projects, working through the many obstacles along the way Communicator: Ability to present to senior leadership, communicate expectations and requirements equally well with business and technology teams, and capacity to write well-reasoned and data-oriented proposals, performing your own data examination as necessary Problem Solver: Ability to utilize exceptional problem-solving skills to work through difficult tasks Qualifications 5+ years of directly managing and responsible for multiple large projects experience 5+ years of Microsoft Office products and applications experience Bachelor's degree in Electrical or Mechanical Engineering Experience and strong technical background in relevant fields of automated or non-automated material handling equipment 5+ years of leading large complex programs experience Master's degree in engineering, mechanical, operations, supply chain, business administration, or equivalent STEM field Experience in Lean Management, Six Sigma and other operations engineer tools Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status. Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit ********************************************************* for more information. If the country/region you're applying in isn't listed, please contact your Recruiting Partner. Our compensation reflects the cost of labor across several US geographic markets. The base pay for this position ranges from $107,600/year in our lowest geographic market up to $177,900/year in our highest geographic market. Pay is based on a number of factors including market location and may vary depending on job-related knowledge, skills, and experience. Amazon is a total compensation company. Dependent on the position offered, equity, sign-on payments, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits. For more information, please visit ******************************************************** This position will remain posted until filled. Applicants should apply via our internal or external career site. #J-18808-Ljbffr

Unify was founded January 17th, 2023 by Austin Hughes and Connor Heggie. Prior to Unify, Austin led Ramp's growth product team focused on new customer acquisition, and Connor was a machine learning research engineer at Scale AI. The rest of our team comes from companies like Airbnb, Spotify, Bridgewater and LinkedIn. Our mission is to build the first system-of-action for go-to-market teams, starting with an end to end platform powering warm outbound. Today, outbound sales is dominated by cold, mass outreach that floods people's inboxes and converts to deals at a tiny rate. We're building a platform to power warm outbound, allowing go-to-market teams to get in touch with the right people at the exact time they're looking for a solution. We've grown revenue 8x year-over-year, and are already serving customers like Guru, Justworks, Together.AI, Flock Safety, Hightouch and more. We're a high energy, high intensity team and we've raised $58M from Thrive, Emergence, OpenAI and others. Come join us in changing how go-to-market works. About the Role Unify is redefining go-to-market with state-of-the-art AI. As a Senior SRE, you'll tackle the scaling and reliability challenges that come with adding terabytes of data monthly and supporting enterprise customers with demanding uptime requirements. You'll work across the stack-optimizing databases, hardening services, and building the automation and observability that keep Unify fast and reliable at scale. What You'll Do Scale our data infrastructure: Optimize and extend our ClickHouse and PostgreSQL deployments-designing partitioning strategies, tuning queries, and improving replication and failover systems. Improve system performance: Profile and optimize critical paths across backend services, identify bottlenecks in data pipelines and API layers, and ship changes that improve latency and throughput. Build for reliability: Implement rate limiting, circuit breakers, graceful degradation, and other patterns that keep the platform stable under load and during partial failures. Automate everything: Write tooling that eliminates toil-automating deployments, scaling operations, backup verification, and incident remediation. Instrument and observe: Build out distributed tracing, metrics, and alerting that give engineers clear visibility into system behavior and accelerate debugging. Respond and learn: Participate in on-call rotations, run incident response, and drive blameless postmortems that prevent recurrence. Who You Are 5+ years of software engineering experience with a strong backend foundation, including 2+ years focused on reliability, infrastructure, or platform work. Hands‑handon experience operating databases at scale including query optimization, replication, and failover. Strong programming skills (Typescript, Python, Go, or similar) with experience building automation and tooling. Able to diagnose complex distributed systems issues under pressure and communicate clearly during incidents. Collaborative, low-ego attitude and desire to work in a fast‑paced environment. #J-18808-Ljbffr

Mini-Circuits designs, manufactures and distributes integrated circuits, modules, and sub‑systems for high‑performance radio frequency (RF) and microwave applications. With design, sales and manufacturing locations in over 30 countries, Mini‑Circuits' products are used in a range of wired and wireless communications applications. Our products are also used in detection, measurement and imaging applications, including military communication, guidance and electronic countermeasure systems, commercial, scientific, military land, sea and aircraft; automotive systems, medical systems, and industrial test equipment. Mini‑Circuits' sells its products to over 20,000 customers globally through our direct sales force, applications engineering staff, sales representatives, as well as through our extensive website. Position Summary: The Reliability Engineer is responsible for conducting reliability studies of existing products and coordinating new product qualification prior to market release. The candidate will work in collaboration with various teams including Reliability, Design Engineering, Product Engineering, Failure Analysis and Project Management teams. Salary Range: $99,000 - $117,000 per year Job Function: Participate in the product development meetings and guide the team to develop reliable products that meet internal specifications and customer requirements. Develop qualification plans for new products, primarily MMICs but also support other product lines including but not limited to Low Temperature Co‑Fired Ceramics, PCBA products, RF accessories and Core & Wire Products. Analyze new products for similarity with existing released products in terms of package, die process and design to determine Qualification by Similarity, thus streamlining qualification testing. Design and execute both device level and package level qualification tests including but not limited to MSL pre‑conditioning, Thermal cycling, UHAST, HTSL, ESD and Life Tests. Define ESD Human Body Model (HBM) and Charged Device Model (CDM) tests as per JEDEC standards. Collaborate with Engineering Test Teams to execute Accelerate Life Tests, High Temperature Operating Life Test. Execute Mechanical stresses such as Vibration, Mechanical Shock, Constant Acceleration & Bend Testing. Co‑ordinate with external labs for outsourced tests. Review RF Test data before and after stresses to analyze changes in performance. Collaborate with Failure Analysis teams to understand the root cause of failures. Identify and record any non‑conformities. Monitor solution implementations to verify effectiveness of corrective actions. Ensure On‑Time Completion of Qualification activities and escalator any potential delays. Present Qualification results with all relevant stakeholders to help Design teams initiate changes to improve reliability performance. Prepare written reports summarizing the results of product performance and failure analysis for both internal purposes as well as customer review. Interface with customers and suppliers on product reliability as required. Interface with supplier to purchase lab equipment. Support reliability assessments originating from production of released products or customer returns. Makes decisions within area of specialty, manages medium to large projects. Promotes ISO9001/AS9100 Quality. The duties, responsibilities and expectations described above are not a comprehensive list and additional tasks may be assigned to the member, within the scope of the position. Qualifications: BS in Mechanical Engineering, Electrical Engineering, Materials, Reliability, Industrial Engineering or Physics. Advanced degree preferred. 3‑5 years' experience as a Reliability Engineer in Semiconductor or equivalent industry. Familiarity with common industry standards including JEDEC, MIL‑STD‑883, MIL‑STD‑202 and AEC‑Q. Experience with Reliability Qualification by Similarity. Experience with Environmental, Mechanical and ESD stresses. Experience with problem solving methodologies and leading root cause analysis. Experience with customer returns failure analysis support. Must have familiarity with failure analysis techniques including Scanning Acoustic Microscopy (SEM), Radiographic Inspection (X‑Ray), Cross‑Section methods. Familiarity with MTTF, MTBF Calculations. Experience with Reliability prediction modeling and tools like Weibull++ (or equivalent reliability software) Experience with Data analysis tools including Advanced Excel, JMP, Minitab. Ability to analyze component performance data in reliability tests, including large variety of test parts and multiple design variations. Experience with Design of Experiments, FMEA, product design reviews and DFM. Excellent written and oral communication skills. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk and hear. The employee frequently is required to stand, walk, sit and use hands to operate a computer keyboard. The employee is occasionally required to reach with hands and arms. The employee must occasionally lift and/or move up to 10 pounds. Specific vision abilities required by this job include close vision, and ability to adjust focus. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Additional Requirements/Skills: Ability and willingness to abide by Company's Code of Conduct. Occasional travel, some overnight, as required (up to 10%). Disclaimer: The listed qualifications and requirements for each position are intended as guidelines. Mini‑Circuits reserves the right to hire outside of these guidelines at Management's discretion. Mini‑Circuits is an Equal Opportunity Employer and does not discriminate on the basis of actual or perceived age, race, creed, color, national origin, sexual orientation, military status, sex, disability, predisposing genetic characteristics, marital status, familial status, gender identity, gender dysphoria, pregnancy‑related condition, and domestic violence victim status or protected class characteristic, or any other protected characteristic as established by federal or state law. #J-18808-Ljbffr

As Saab, Inc. is growing in East Syracuse, NY, we are seeking a Senior Quality Inspector, In-Process Inspection to: Authorize assembly process completion and support the build team with in-process inspections during the build process. Validate visually and dimensionally that the product meets requirements compared to engineering drawings. Inspect for defects in surfaces, fasteners, sealant, paint, and testing. Compile technical data and reports to provide feedback on final inspection results and recommended corrective actions. Develop deviation reports and represent quality at the Material Review Board. Be responsible for non-conforming material processes and procedures. Deliver high level of workmanship in inspection processes for structural assembly and system installations. Experienced in quality management systems and become a subject matter expert in the company management system. Participate in tooling validation and application to meet product requirements in quality and efficiencies. Develop standardization for working procedures for high repeatability. Compensation Range: $28.08 - $33.70 per hour The compensation range provided is a general guideline. When extending an offer, Saab, Inc. considers factors including (but not limited to) the role and associated responsibilities, location, and market and business considerations, as well as the candidate's work experience, key skills, and education/training. Skills and Experience: High school degree or equivalent required. Technical degree or certification in the field of electro/mechanical assembly, mechanics, or maintenance is preferred. 5+ years of qualified inspection experience in manufacturing. Experience with ISO/AS9100 and highly standardized processes. Strong communication skills and ability to work as a team. Proficiency interpreting engineering drawings and specifications in written and digital format required. Ability to execute the appropriate working methods and select the right tools to meet the right level of quality and efficiency. Ability to work with standardized procedures for high repeatability in a highly advanced and connected environment. Excellent communication and team working skills. Physical Requirements: Must be self-mobile and able to stand for extended periods. Ability to perform physical tasks such as sitting, bending, stooping, walking, climbing, reaching during a normal workday. Ability to perform repetitive motions (such as lifting or assembly of parts) including the use of hand held power tools. Ability to lift up to fifty (50) pounds. Hearing and vision within normal ranges is important for conversations, and to receive ordinary information and directives from Production Supervisors and management as required. Ability to work extended hours when required. Citizenship Requirements: Must be a U.S. citizen, Permanent Resident (green card holder), or protected individual as defined by 8 U.S.C. 1324b(a)(3). Drug-Free Workplaces: Saab is a federal government contractor and adheres to policies and programs necessary for sustaining drug-free workplaces. As a condition of employment, candidates will be required to pass a pre-employment drug screen. Benefits: Saab provides an excellent working environment offering professional growth opportunities, competitive wages, work-life balance, a business casual atmosphere and comprehensive benefits. Highlights include: Medical, vision, and dental insurance for employees and dependents Generous paid time off, including 8 designated holidays 401(k) with employer contributions Tuition assistance and student loan assistance Wellness and employee assistance resources Employee stock purchase opportunities Short-term and long-term disability coverage About Us: Saab is a leading defense and security company with an enduring mission, to help nations keep their people and society safe. Empowered by its 19,000 talented people, Saab constantly pushes the boundaries of technology to create a safer, more sustainable and more equitable world. In the U.S., Saab delivers advanced technology and systems, supporting the U.S. Armed Forces and the Federal Aviation Administration, as well as international and commercial partners. Headquartered in Syracuse, New York, the company has business units and local employees in eight U.S. locations. Saab is a company where we see diversity as an asset and offer unlimited opportunities for advancing in your career. We are also a company that respects each person's needs and encourage employees to lead a balanced, rewarding life beyond work. Saab values diversity and is an Affirmative Action employer for protected veterans and individuals with disabilities. Saab is an Equal Employment Opportunity employer, all qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, disability status, or any other federal, state, or locally protected category.

A leading technology firm is seeking a Senior Machine Learning Engineer to join their team in San Francisco. This hybrid role requires expertise in the entire machine learning lifecycle, including model development, deployment, and monitoring. The ideal candidate has over 3 years of experience in building production-quality models, strong software engineering skills in Python, and familiarity with modern ML tools. Join to make an impact on how users connect with home services. #J-18808-Ljbffr

Elevate your career at Marotta Controls, a New Jersey Top Workplace three years running! Dedicated to innovation, quality and excellence, we deliver cutting edge control systems for the Aerospace & Defense industry. At Marotta, we value bold thinking and teamwork, and we empower our employees to push boundaries while delivering top-tier solutions to our customers. Our team fosters a fun, collaborative culture where creativity and technical excellence thrive! Your next big opportunity starts here. Be part of a company where your work supports a mission that makes a difference-apply today ! Manufacturing Engineer II - Turning (2nd Shift) POSITION PROFILE: This position is primarily responsible for creating, maintaining and optimizing CNC Programs (Milling & Turning Centers), Operation/Tool Sheets, Mfg. Routers and tool/fixture designs utilizing best practices to effectively support machine shop operations for Marotta Controls, Inc. Your knowledge/expertise should include both Gibbs or Mastercam, and PRO-E. This knowledge will be applied during the design phase of new products, redesign phase of existing products, equipment set-up activities, cost estimates, facility layout plans, root cause troubleshooting and continuous improvement initiatives. The incumbent must be a dynamic individual who can multi-task and oversee various activities associated with aerospace manufacturing ensuring that Mfg. Eng. activities are conducted in a manner that complies with company requirements (i.e. regulatory, safety, administrative, etc.). This position requires effective interaction with a broad spectrum of people both internal and external to the organization to successfully support operations and the corporate strategic vision. Minimum Required Qualifications: 5 years of related experience in a machine shop manufacturing environment (Aerospace preferred, but not required) 2 years of Gibbs and/or Mastercam & PRO- E usage High School or (GED) Diploma, Bachelor's degree in Mfg. Engineering or related field preferred Self-motivated individual who possess the ability to analyze, organize, plan, prioritize assignments, multi-task and achieve results through interaction with others Possess math skills required to design tools/fixtures and generate accurate, safe CNC Programs in an effective manner. Ability to interpret various types of graphs and data required for problem solving, SPC, etc. Demonstrate effective verbal/written communication skills required for interacting with all levels of personnel both internal and external to the organization Secure external resources (subcontracted services) to maintain and ensure machine shop equipment is operational Knowledgeable/proficient in the areas of Lean Manufacturing concepts, employee training, development of equipment, operation, & training procedures/policies, effective application of mfg. methods, tool/fixture design, material selection, facility layout plans, cost estimates, DFM concepts, GT&D practices, machine shop documentation (operator./tooling sheets, routers, etc.), root cause investigations, trouble shooting, performance metrics and machine shop operational activities Must be computer literate. Demonstrate proficiency using Gibbs or Mastercam & PRO-E, CAD/CAM. Ability to read, interpret documents (i.e. procedures, blueprints/technical drawings, etc.) and use necessary measuring devices/equipment to confirm tooling/fixturing geometries and dimensions Must be a US Citizen ESSENTIAL DUTIES / RESPONSIBILITIES: Abide by all safety, quality, housekeeping and company policies/procedures to ensure compliance to various regulatory and internal system requirements All practices and activities related to Mfg. Eng. must be performed in a manner which supports commonality, standardization (where applicable), First Past Yield and utilization of safe/best industry practices Create, maintain and refine detailed mfg. documentation (i.e. Operation Sheets, Routers, Set-up/Tooling sheets, etc.) through effective selection of manufacturing methods (inclusive of inspection point selection) Assist in securing external resources (subcontracted services) to maintain and ensure machine shop equipment is operational to achieve production efficiencies, and on-time customer shipments Generate, optimize, validate and maintain C.N.C. Programs for CNC MILLING and CNC TURNING CENTERS through the effective application of Gibbs & PRO-E CAD/CAM software Design efficient/safe tools and fixtures required to support machine shop operations Generate accurate estimates (i.e. set-up, cycle time, material, etc.) using cost effective mfg. methods Define, monitor and communicate the status of performance metrics to management. Implement appropriate actions to resolve identified issues Effectively communicate issues in a timely manner to all affected parties internal/external to the Marotta Organization Train and provide guidance to personnel required to support the goals and objectives associated with Mfg. Eng. and machine shop operations Foster a positive, cooperative and safe work environment through effective communication at all levels of the Marotta organization Actively participates in team meetings, root cause investigations, trouble shooting activities (as req'd), continuous improvement initiatives/programs, etc. to provide constructive recommendations and initiate actions to support company initiatives/goals/vision Work Environment : While performing the duties of this job, the employee is frequently exposed to conditions typical of a manufacturing/machine shop environment, including, but not limited to: fluids, fumes or airborne particles, moving mechanical parts, noise and vibration This job interacts both in a professional office environment and a manufacturing/machine shop environment. This role uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines, as well as environments inclusive of the appropriate eye, hearing and foot protection (as required). Temperature of work environment may be affected by outside/external temperatures, machining processes, etc. Overtime and weekend may be required, if job duties demand. No travel is expected for this position Physical Requirements : While performing the duties of this job, the employee is regularly required to talk and hear. The employee is frequently required to reach with hands and arms, and to use hands to finger, handle or feel Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus. The employee is regularly required to stand at length (7-8 hours, daily), sit, walk, stoop, bend, turn, balance, and/or crouch, and move about the facility. The employee may be required to lift and/or move items weighing up to 40 pounds, and occasionally up to 70 lbs. This position is at our Montville, NJ corporate offices location. Pay Range: $33.00 - 42.00/hour + shift differential Many of our contracts require proof that you are a U.S. citizen and/or that an export license has been obtained for employees who are citizens of certain countries. Your employment, both initially and continually thereafter, is conditioned on production of such proof of citizenship and/or any export license that may be required to comply with any and all applicable laws, regulations, or executive orders, or required by Federal, State, or local government contracts. At Marotta Controls, we are committed to a fair, performance-driven compensation approach that promotes consistency across all levels of our organization. We ensure that pay decisions are free from bias, based on objective criteria, and are regularly reviewed. Your level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, experience, and internal consistency. Additionally, we offer a highly competitive compensation package for this opportunity, including incentive compensation and a comprehensive suite of premium benefits. These include medical, prescription, dental, vision, life, and disability insurance, a 401(k) plan with company match, tuition assistance, paid vacation, sick and personal days, paid holidays, and flexible scheduling options such as compressed workweeks. We value and reward employee achievements and host multiple engagement events each quarter to foster a strong, supportive workplace culture. If you are looking to grow or accelerate your career and be part of a best in class organization while enjoying a work-life balance, please visit our website at *************** to learn more about us and to apply. Check out all of our openings at VETERANS ARE ENCOURAGED TO APPLY No agencies, please. Pay Range: $30 - $36 per hour

Responsibilities Under the direction of the VP of Continuous Improvement, this position is responsible for supporting and assisting the Continuous Improvement Organization (Business Unit and Manufacturing Plants) as "boots on the ground" in the organization, planning, implementation, and follow-through of manufacturing improvement initiatives. Correspondingly, the incumbent coordinates and leads a wide range of activities that are designed to improve on-time delivery, productivity, quality, cost, safety, and environmental performance. This position does not directly supervise other personnel. This position does support Operations Supervisors, Area Leads, and Plant Managers. Primary Responsibilities Participate in the Howmet Business System implementation of continuous improvement initiatives and drive waste reductions utilizing Lean principles (JIT, Autonomation, Value Stream Mapping, Kaizen, 5S, Standard Work, Line/Cell Design, Single Piece Flow, Material Flow, Visual Management, SMED, TPM, Root Cause Problem Solving, etc.) Coordinate with resource departments within the assigned locations to fabricate, install, and implement improvements to drive waste down and increase efficiency and output. Develop Value Stream maps of key processes and product flows. Define the current condition of the facility(ies) to identify opportunities and create a target condition, with action plans to improve operational and financial results. Complete value stream mapping, identify opportunities, and lead shopfloor manufacturing efforts in process reengineering and process improvements in various plants. Facilitate successful kaizen, problem solving, and rapid improvement process events with both internal and external consultants, customers, and suppliers. This includes providing support to sustain all follow-throughs required to sustain the improvements initiated during those events, especially those concentrated on local improvement. Performing other duties as assigned. The incumbent will possess: Demonstrated experience in manufacturing improvement techniques, including flow principles, Kanban, and plan for every part (PFEP) Expertise in value stream mapping and associated improvement methodologies Understanding of pillars of Toyota production system (JIT, Autonomation) Experience evaluating TAKT time vs. cycle time, determining work area constraints (i.e. cycle time constraint, periodic work constraints, downtime constraints). Experience on shop floor, working with employees, and enhancing manufacturing processes Strong interpersonal skills requiring the ability to resolve conflicting interests and obtain cooperation. Strong analytical and problem-solving skills: able to develop and use structured approaches to identify root causes and recommend resolutions Demonstrated experience in project leadership and project management skills, with ability to manage multiple projects simultaneously to meet objectives and key deadlines Qualifications Basic Qualifications: Minimum two years of experience in a manufacturing environment Bachelor of Science degree in Engineering from an accredited institution is required Must possess knowledge and understanding of Continuous Process Improvement methodologies such as Lean and Six Sigma Strong working knowledge of Microsoft Office Suite, including Word, Excel and PowerPoint Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position. This position entails access to export-controlled items and employment offers are conditioned upon an applicant's ability to lawfully obtain access to such items. Preferred Qualifications: Bachelor's degree in Engineering, specifically Industrial or Mechanical Engineering, is preferred Exceptional Excel Spreadsheet creation, macros, and related data analysis skills Three or more years of related experience in a manufacturing environment highly desired Must have excellent interpersonal and communication skills as well as exhibit initiative and a high level of energy Must be willing to spend time on the manufacturing shop floor to learn and interact with employees Ability to manage multiple projects simultaneously and drive change Exhibit teamwork and go-getting attitude Good analytical/statistical problem-solving skills About Us Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers' success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at ************************** Follow: LinkedIn, Twitter, Instagram, Facebook, and YouTube. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email [email protected] About the Team The Howmet engines business produces world-class aerospace engine components, including investment castings, fasteners, rings and forgings. Our vacuum melted superalloys, machining, performance coatings and hot isostatic pressing for high performance parts enable the next generation of quieter, cleaner and more fuel-efficient aerospace engines. Able to supply more than 90% of structural and rotating aerospace engine components.

STS Aerospace is a world-leading provider of reliable, top-quality products for fluid conveyance, serving commercial and military aircraft and the energy, space and marine industries. The depth and breadth of our engineering expertise enables us to design, build and customize fixtures and tooling that will meet the needs and solve the problems you are experiencing now and prevent issues from emerging in the future. Job Description STS Aerospace is looking for a Manufacturing Engineer that is accountable for improving and maintaining first pass yield for specified parts and/or processes. This is accomplished by driving continuous improvement initiatives, process development/modification, documentation of standards/best practices, and equipment onboarding/troubleshooting. Candidate shall also support cross functional initiatives with Production, Quality and Purchasing departments to meet company goals and product quality standards. Scope of Responsibilities: Troubleshooting of quality issues throughout the production process: welding, brazing, nickel plating, cleaning, and borescope inspection. Additional processes: bending. Use continuous improvement and lean techniques to increase production efficiency, eliminate waste, and drive cost savings opportunities. Support production staff with specification/technical knowledge, inspection techniques, weld/braze consumables management and day-to-day trouble shooting efforts. Documentation and standardization of processes via work instructions and operating instructions to increase efficiency, facilitate cross-training and enable proper equipment usage. Equipment and tooling on-boarding into production process to support new product, process efficiency, ergonomics or safety. Basic troubleshooting, light-level repair and/or export of orbital weld machines, orbital weld heads, steam cleaning machines, tungsten grinders etc. Effective communication with production employees, management staff and cross-functional team to ensure the alignment of efforts to meet company goals. Conduct classes and trainings to support continuous improvements efforts and product quality i.e. Visual Inspection and Back-to-Basics courses. Manage operator qualifications to ensure production staff is qualified to perform given tasks Ability to work in a fast-paced, deadline-oriented team environment Ability to read, interpret, translate engineering drawings and customer specifications to drive compliance Excellent team player with a great attitude. Accountabilities Support of Team Goals, Represent company as process expert, requisition tooling and equipment for processes. Performance Measurement & Performance Evaluation. Meet team quarterly objectives. Adherence to goals and behaviors associate with achieving them First pass yield Process compliance (welding, bending, brazing, chemical) Project completion/execution Aging (units over lead-time) Qualifications Proven working experience as a manufacturing engineer or in a related field. Experience in blueprint reading and spec interpretation. Must be comfortable in a manufacturing environment often fast-paced and loud. Must be able to stand, lift, walk, bend, and reach during their shift. Must be comfortable wearing safety glasses. Work well within a team. Creative and innovative thinking skills. Problem-solving skills. Additional Information Benefits: 401(k) 401(k) matching Dental insurance Employee assistance program Health insurance Life insurance Paid time off Vision insurance We believe that different perspectives and backgrounds are what make a company flourish. All qualified applicants will receive equal consideration for employment regardless of color, religion, sex, sexual orientation, gender identity, national origin, economic status, disability, age, or any other legally protected characteristics. We are proud to be an inclusive company with values grounded in equality and ethics, where we celebrate, support, and embrace diversity. At no time during the hiring process will Smiths Group, nor any of our recruitment partners ever request payment to enable participation - including, but not limited to, interviews or testing. Avoid fraudulent requests by applying jobs directly through our career's website (Careers - Smiths Group plc)

Job Title: Quality Manager - Food Manufacturing About the Role: We are seeking a dedicated and experienced Quality Manager to join our team in the food manufacturing sector. The ideal candidate will be responsible for ensuring that our products meet the highest standards of quality and safety. You will lead quality assurance initiatives and drive continuous improvement across all production processes. Key Responsibilities: Develop, implement, and maintain quality assurance protocols and procedures specific to food manufacturing. Oversee the quality control processes to ensure compliance with industry standards and food safety regulations. Collaborate with cross-functional teams to identify and resolve quality issues. Conduct regular audits and inspections to ensure adherence to quality standards and regulatory requirements. Analyze data and reports to identify areas for improvement and implement corrective actions. Lead and mentor the quality assurance team to achieve departmental goals. Liaise with suppliers and vendors to ensure quality standards are met throughout the supply chain. Qualifications: Bachelor's degree in Food Science, Quality Management, Engineering, or a related field. Proven experience as a Quality Manager or similar role in the food manufacturing industry. Strong knowledge of quality assurance methodologies and food safety standards (e.g., HACCP, ISO 22000). Excellent analytical and problem-solving skills. Strong leadership and communication abilities. Experience with quality management software and tools. Attention to detail and a commitment to excellence. Preferred Skills: Certification in quality management or food safety (e.g., Six Sigma, CQE). Familiarity with regulatory requirements relevant to the food industry.

Job Description QUALITY MANAGER -MANUFACTURING heavy industrial Compensation: $120,000+ (Depending on Experience) Quality Manager to lead and continuously improve an AS9100-certified Quality Management System within an aerospace and industrial manufacturing environment. **This role requires a Quality leader with proven long-term employment stability, expert-level AS9100 experience, and strong verbal communication skills. This individual must be comfortable interfacing with executive leadership, customers, and external auditors and must bring a professional presence and high level of accountability. Experience in food, pharmaceutical, or chemical industries is not a good fit for this role. Requirements 7+ years of Quality Management experience in a manufacturing or job shop environment Demonstrated long-term tenure and employment stability with prior employers; frequent job changes will not be a fit for this role Expert-level AS9100 experience, including hands-on ownership and audit leadership ISO 9001:2015 experience Aerospace, defense, or ITAR-regulated manufacturing background Machining experience with a strong understanding of inspection tools (calipers, micrometers, CMM, optical comparator) Excellent blueprint reading and GD&T interpretation skills Experience with PPAP, FMEA, Root Cause Analysis, and Control Plans Exposure to Environmental, Health, and Safety (EHS) standards Excellent verbal communication skills with the ability to interface confidently with executive leadership and external auditors Ability to travel internationally approximately once per year (Mexico and Singapore) Bachelor's degree preferred; equivalent experience welcomed Benefits Medical, dental, vision, and life insurance Paid time off, holidays, and sick time 401(k) plan

New Jersey, Onsite, Full Time 150-200k (Based On Experience) We are a large-scale manufacturing operation in New Jersey, constantly evolving and committed to technical excellence, efficiency, and innovation. Our engineering team includes specialists across multiple disciplines, and we are now seeking a strong, well-rounded leader who can bring these experts together to drive collaboration, growth, and continuous improvement. Position Overview We are seeking a highly experienced and technically strong Senior Engineering Leader who can guide, mentor, and elevate a diverse team of engineers. While each team member specializes in their area-process, industrial, mechanical, automation-the Senior Engineering Leader will unify their efforts, establish standards, and ensure best practices are adopted plant-wide. The right candidate is not just a subject-matter expert but a strategic, big-picture leader who can inspire engineers, lead by example, and drive measurable improvements across all spaces. You'll play a pivotal role in optimizing operations, training your team, and embedding a culture of continuous improvement. The Ideal Candidate A well-rounded senior engineer with deep technical knowledge and leadership presence. Proven ability to unify and guide specialized engineers toward shared goals. Skilled in mentoring, training, and developing technical talent. Naturally curious, always seeking ways to optimize systems, workflows, and operations. Confident communicator who can balance strategic vision with hands-on problem solving. Key Responsibilities Lead, mentor, and develop a multidisciplinary engineering team across process, industrial, and mechanical functions. Establish plant-wide engineering standards and best practices to ensure efficiency, quality, and safety. Partner with specialized engineers to identify challenges, improve workflows, and optimize facility spaces. Drive automation, process upgrades, and system enhancements in alignment with company goals. Promote knowledge sharing and training across engineering disciplines. Support capital expenditure planning, cost models, and ROI analysis. Champion a continuous improvement culture across all engineering functions. Qualifications Bachelor's degree in Mechanical, Industrial, Process, or related Engineering field (Master's preferred). 10-15+ years of engineering experience within manufacturing environments. Strong technical expertise across multiple engineering disciplines (process design, systems optimization, automation, facility layout). Proven leadership track record of managing, training, and growing engineering teams. Experience leading cross-functional initiatives that improved efficiency, cost, or production scalability. Excellent problem-solving, analytical, and project management skills. Strong communication and leadership presence-capable of influencing both technical staff and executive leadership. Must-Haves 10+ years in high-volume manufacturing engineering. Hands-on technical strength plus proven leadership of engineering teams. Experience mentoring engineers and elevating team performance. Demonstrated success leading process optimization and system improvements across multiple disciplines. Benefits Competitive salary and performance-based incentives. Medical, dental, and vision coverage. 401(k) retirement plan with employer contributions. Professional development and training opportunities. A collaborative environment with real impact on large-scale operations. This is an exciting opportunity for a high-level engineer ready to step into a leadership role where you'll unify specialized engineers, mentor rising talent, and drive measurable improvement across a large-scale manufacturing plant. Email Resume: ********************* Apply Online: https://jobs.crelate.com/portal/maiplacement/job/eqr4zdqe388dprs6jnnfkh9tkc?crt=***********73 Refer a friend, get up to $1000!

At Coco, we're revolutionizing last-mile delivery with autonomous robots, making deliveries faster, more efficient, and more sustainable. We're looking for a proactive and tech-savvy Office Manager to oversee our facility operations, ensuring our teams have the resources and environments needed to thrive. About the Role As a Fleet Quality Technician, you'll be the backbone of our robot operations, assembling, maintaining, and deploying delivery robots with precision while leading efforts to diagnose and resolve hardware, electrical, and IoT issues. You'll design repeatable solutions that scale, perform hands-on repairs and testing, and provide critical feedback that drives future hardware improvements. This role is fast-paced, technical, and highly dynamic-perfect for someone who thrives on problem-solving, takes pride in getting things right the first time. What You'll Do Serve as the technical lead during robot deployments, identifying and resolving mechanical, electrical, and software integration issues in real time Own the root-cause analysis and resolution process for fleet quality issues that impact launch success or fleet uptime Design and implement scalable SOPs, tools, and diagnostics for frontline teams to reduce downtime and improve serviceability Collaborate with Engineering, Supply Chain, and Field Operations to close the loop between product issues and fixes Provide structured feedback to Product & Engineering teams and help pilot new hardware, software, or process changes in the field Build lightweight dashboards, diagnostic logs, and technical documentation that can be adopted across teams About You 4-6+ years in hardware operations, fleet maintenance, or field engineering with a focus on mechanical and electrical systems Deep experience troubleshooting mechanical, electrical, and IoT (connectivity/sensor/data) issues Strong systems thinking mindset-you see the big picture and design processes to solve root causes, not just symptoms Independent, self-motivated, and solution-oriented-you don't wait to be told what's broken Excellent communicator with the ability to work fluidly across technical and non-technical stakeholders Familiarity with SQL, JIRA, inventory systems (e.g., Oracle ERP), and basic data analysis to spot trends and validate fixes Comfortable in fast-moving environments and field-based problem-solving scenarios Bonus Points Prior experience in robotics, micromobility, autonomous delivery, or connected fleet operations History of developing technical SOPs, diagnostic workflows, or cross-team enablement tools Experience working closely with Engineering and Product teams to iterate on hardware or firmware in production environments

Benefits: 401(k) Dental insurance Health insurance Paid time off Seeking a Coffee Equipment Technician who wants to achieve excellence in themselves and be a member of a winning team. Handy person willing to learn and grow their skills in diagnostics, repairs and maintenance of commercial coffee/tea brewers, espresso machines, and coffee related foodservice equipment. Experience is greatly valued. Field work in the NY Metro area and Jersey City shop. Self-starter, with strong organizational skills. Ability to work with team members assisting customers to resolve coffee and equipment issues. Responsibilities: Troubleshoot, repair, install, adjust coffee and espresso brewing equipment Train customers in basic operations and maintenance from the user perspective Perform routine preventative maintenance as well as full refurbishment in shop and field Respond to work order requests in a timely fashion Work with team members and customers to resolve technical problems Ensure coffee quality standards at the point of sale Adhere to all company safety policies and procedures Job description is not intended to cover every single requirement of the job. The company reserves the right to change job duties at any time. Qualifications: Mechanical and electrical skills needed to repair and maintain equipment Desire to perform to the highest standards of excellence Diplomacy and communication skills needed to provide quality customer experience Ability to handle physical workload and lifting heavy equipment in excess of 50 lbs. Must have valid clean Drivers license Fluent in English both in speaking and writing . Salary Range: 50-70K, based upon experience Company Description: Kobrick Coffee Co. Inc. is a 105 year old Specialty Coffee Roaster based in the NYC area since 1920. Clients include Coffee Shops and Cafes, Restaurants, Hotels, and other food service venues who desire high quality coffee and top-level service and support from their coffee partner/roaster.

SUMMARY/OBJECTIVE (Basic purpose of job) The Quality Technician primary responsibility is for carrying out the quality control lab testing for the bottling lines as well as the calibrating and setting up the lab equipment and ensuring results are recorded accurately on computer systems and data sheets. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed must be representative of the knowledge, skills, minimum education, training, licensure, experience and/or ability required. JOB RESPONSIBILITIES Perform quality function audits on all production lines. Ensure products produced conform to specification, food safety, have Good Manufacturing Practices, and adhere to relevant regulatory requirements. Perform all microbial sampling and testing for incoming raw materials and finished products. Advise production on out of specification packaging, raw materials and process deviations. Ensure all production operations operate to highest quality standards Be responsible for plating of samples, analyzing, interpreting and reporting results for all bottling, tanks. Record production information as required. Ensure accurate records are kept and maintained of all specifications and test results. Keep laboratory equipment maintained and operating efficiency and safely according to all health and safety standards. Support cleanliness and sanitation of Quality Lab, Batching Area, Production lines, Sugar and RO room. Keep all work areas clean and orderly. All other duties, as required or needed. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. While performing the duties of this job, the employee is regularly required to talk or hear and see. The employee frequently is required to stand; walk; use hands to finger, handle or feel and reach with hands and arms. The employee must regularly lift and/or move objects up to 40 pounds. JOB REQUIREMENTS HSD, College Degree preferred 2-3 years' experience as a Lab Technician Excellent attention to details Good interpersonal and communication skills Ability to work as part of a team Good statistical and numerical ability Please note this Job Description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

About Us: The Motherson Group is one of the 15 largest full system solutions providers to the global automotive industry, serving multiple further industries, such as rolling stock, aerospace, medical, IT, and logistics, with over 190,000 employees across 44 countries worldwide. About The Job: Apply customer & SAS quality standards on shop floor through inspections, instructions & training Support & maintain test planning and checking procedures Gauge checks Support release of series assembly & conduct product audits with documentation Evaluate scrap parts and issue Quality Alerts for customer complaints Authorize block/release of production parts & manage emergency data Follow work, test & measuring instructions; handle tools accurately Solve quality issues using ACT QRCI methods Update defect code list & maintain control plans Liaise with production team on quality issues Communicate with customers/suppliers on complaints Attend risk management/P-FMEA meetings & workstation rating Qualifications: Possibly experience in the automotive industry; potentially also 1st time experience 3-5 years of experience in process quality area Product knowledge Process knowledge Control plan Technical undestanding Problem-solving experience & methodologies What We Offer: Competitive Pay Medical Benefits 401K Paid Time Off

About US: We are a company that provides innovative, transformative IT services and solutions. We are passionate about helping our clients achieve their goals and exceed their expectations. We strive to provide the best possible experience for our clients and employees. We are committed to continuous improvement and innovation, and we are always looking for ways to improve our services and solutions. We believe in working collaboratively with our clients and employees to achieve success. DS Technologies Inc is looking for Collibra Data Quality (DQ) Technical SME role for one of our premier clients. Job Title: Collibra Data Quality (DQ) Technical SME Location: New York, NY Position Type: Contract Only W2 - Citizens Job Description: Overview: We are seeking a highly skilled Collibra Data Quality (DQ) Technical SME responsible for the installation, configuration, administration, and enhancement of the Collibra DQ platform. The ideal candidate will have extensive experience implementing data quality rules, automation workflows, and enterprise-level integrations, supporting a robust data governance environment. Key Responsibilities: Install, configure, upgrade, and maintain the Collibra Data Quality (DQ) application and its components. Design and implement data quality checks, validation rules, and anomaly detection to enhance data accuracy, completeness, and reliability. Build and maintain workflows and automated remediation processes within Collibra DQ. Develop and support Collibra workflows, API integrations, and Java-based custom solutions. Integrate Collibra DQ with enterprise data systems including Snowflake, RDBMS, REST/Java APIs, and data lakes. Implement CI/CD pipelines and manage version control (GitHub) for DQ artifacts and integrations. Develop microservices using API/Event-Driven Architecture to support scalable integrations. Coordinate and communicate Collibra platform upgrades and major releases. Onboard new users, deliver training sessions, and support Data Governance and data steward teams. Required Qualifications: Bachelor's degree in Computer Science or related discipline (or equivalent experience). 12+ years overall experience in Data Engineering and/or Data Governance. 5+ years hands-on experience with Collibra Data Quality (administration, configuration, rule design). Strong expertise in installing, administering, and customizing enterprise DQ applications. Proficiency in Java, API development, and Collibra workflow design/implementation. Proven experience integrating Collibra with platforms such as Snowflake, RDBMS, REST APIs, and other enterprise systems. Preferred Qualifications: Experience developing custom integrations using Collibra APIs. Experience building governance metrics or scorecards using Collibra DQ metadata. 5+ years experience implementing Collibra integrations (workflows, connectors, automation). Compensation: $83.00 per hour We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law.

A client of Insight Global in the Bronx, NY is seeking a Production Engineer to join their team! This individual will be responsible for leading manufacturing improvements by optimizing packaging line performance and minimizing downtime through data-driven analysis. Must partner with cross-functional teams to implement sustainable process enhancements and uphold quality standards, as well as applying Lean Six Sigma methodologies to drive efficiency and support continuous improvement. This is an onsite position; candidates are required to be onsite 5 days per week. Required Skills & Experience 5-7 years of experience as an engineer in a manufacturing environment Bachelor's degree in engineering (mechanical, chemical, or biomedical preferred) Experience partnering with cross functional teams Strong understanding of Lean and Six Sigma principles