Quality engineer jobs in Chicopee, MA - 428 jobs

About UFP MedTech: UFP Technologies is a designer and custom manufacturer of comprehensive solutions for medical devices, sterile packaging, and other highly engineered custom products. UFP is an important link in the medical device supply chain and a valued outsource partner to most of the top medical device manufacturers in the world. The Company's single-use and single-patient devices and components are used in a wide range of medical devices and packaging for minimally invasive surgery, infection prevention, wound care, wearables, orthopedic soft goods, and orthopedic implants. UFP Technologies, Inc. offers a competitive benefits package, including but not limited to: * Medical, Dental, Vision, Life, Disability Insurance * 401K with a matching contribution * Paid time off, Paid holidays, Employee discounts and much more! Location: This position will be on-site full-time in Chicopee, MA. The position holder will need to be within commuting distance (within 45 min). Quality Technician Summary: The Quality Technician performs diversified duties to monitor and ensure the proper quality testing of company products. This role provides support related to corrective action containment, component measurement / testing, product certification and administrative tasks. Quality Technician Essential Duties and Responsibilities: * Audits quality testing and documentation completed by operators, and reviews quality testing results to ensure proper testing has been conducted, results properly recorded and that results are within specification and without documentation errors. * Reads, reviews and interprets statistical run charts to detect trends in product quality line fall-off and report to appropriate personnel. * Ensures all ISO or other quality standards and procedures are being followed. * Authorizes release of finished goods based on quality audits. * Participates in Root Cause Investigations and provides corrective actions to customer SCARs. * Conducts any required special testing, failure analysis, etc. * Provides instruction, guidance and direction for manufacturing employees in determining acceptable products. * Performs regularly scheduled calibration of measuring and test equipment and arrange external calibration services. * Performs all other duties as assigned or needed. Quality Technician Qualification Requirements: * High school diploma, and 2+ years of related work experience. * Experience with Quality Standards - ISO 9001 and / or ISO 13485. * Bi-lingual in Spanish strongly desired. * Able to read and understand blueprints and other specifications. * Able to use micrometers, calipers, video measuring equipment and other common inspection tools. * Basic knowledge interpreting SPC control charting. * Ability to interact with different levels of the organization. * Strong oral communication and interpersonal skills. * Experience with Microsoft Office applications. UFP Technologies, Inc. is an Equal Opportunity/Affirmative Action employer Minorities/Women/Veterans/Disabled. #UFP #MEDTECH #CHIC

Join the worldwide leader in playing cards and in “play” solutions. Play is what keeps us going, and it always has been our greatest motivation. That's why we live different, play different. The Quality Technician Level 2 plays a crucial role in maintaining the high standards in the production process. They utilize their skills and knowledge to inspect products or processes to ensure they meet predefined specifications and recommend improvements with the goal of delivering high quality products to our customers. What You'll Do as a Quality Technician Level 2: Complete visual and or mechanical inspections of product and processes Use measuring instruments, along with fixtures and gauges to determine product quality. Perform essential functions of In-Process, Final Assembly, and Incoming inspections including recording inspection data to the specified documents or electronic data bases. Perform defect tracking and analysis to ensure appropriate corrective actions are implemented upon identification of a defect. Use sampling plans to determine the correct samples required from a Lot of product. Process audit data and DMR's electronically in the ISO9001 ISIR Corrective Action System. Perform Finished Goods Warehouse audits. Perform all aspects of the FEP Samples Assembly process and QSAM audits process. Technicians are required to be knowledgeable in Q-S.A.M. work instructions. We're Looking for a Quality Technician Level 2 with: Previous experience as a Quality Technician Knowledge of sampling plans for inspection Functional knowledge of calibration requirements, preferably related to games manufacturing Understanding of systems used to submit product samples for toxicity & certification testing. Trained to use instrumentation and ability to record the measured data. Computer skills to recording required inspection data Solid knowledge of the ISO9001 ISIR Corrective Action System. Ability to transition easily within any of the Quality areas related to this facility. Benefits a The Quality Technician Level 2 Can Expect from Cartamundi: Competitive pay Climate controlled facility 401(k) with company match Health, dental, and vision insurance starting day one HSA (Health Savings Account) and FSA (Flexible Savings Account) Life insurance Short-Term and Long-Term Disability Paid time off Tuition reimbursement Employee discounts on daycare, gym memberships, travel, and much more Physical requirements and working conditions: Our manufacturing Plant is comprised of enclosed office and manufacturing space. This position requires the ability to: Move throughout the entire facility to attend to various issues Work effectively in teams across functional groups with strong communication skills Perform sedentary work on computer systems Lift and transfer materials weighing up to 25 pounds frequently Bend, reach shoulder height, push and pull This Quality Technician Level 2 position is located on-site in our East Longmeadow Facility Apply today and discover the magic of making a difference at Cartamundi! Cartamundi does not discriminate based on race, sex, color, religion, age, national origin, marital status, disability, veteran status, genetic information, sexual orientation, gender identity or any other reason prohibited by law in provision of employment opportunities. This employer participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. For more information on E-Verify, or if you believe that your employer has violated its E-Verify responsibilities, please contact DHS dhs.gov/e-verify . Candidates must be 18 years old to work for Cartamundi. About Cartamundi: At Cartamundi, we're all united by our common belief that world is better with play. Play is what keeps us going, and it always has been our greatest motivation. That's why we live different and play different. To us, it is not just an activity. It is a guiding mindset that reminds us to have fun, to be fair, to connect with people - across cultures and generations - and to embrace shared experiences. We are a worldwide leader in playing cards and in “play” solutions. Our owned brand portfolio includes a suite of heritage brands which go back as far as 1848, including global brands like Bicycle , HRO , Bee , Copag , Shuffle and many locally loved brands. These brands combine craftsmanship with innovation as the basis for their continued relevance and positive contribution to the local communities that love and use these brands. At Cartamundi, we have significant expertise in printing; our presses have been running since 1765. Today, our company has become the largest playing cards and board game manufacturer in the world and the trusted partner of leading toy companies. We make well-known brands such as Monopoly , Uno , Magic: The Gathering , Guess Who , Pokémon , Trivial Pursuit every day. As we look into the future and how entertainment evolves, we are bringing the digital world to the physical world and vice versa. We have a dedicated team of experts that is looking into future technologies, products, applications that can get our consumers and communities to truly live different and play different. We are still a family-owned company with headquarters in Belgium and have a global network of 16 manufacturing facilities, 6 design centers, 1 digital studio and 1 global R&D center.

Summary: This position is responsible for planning activities concerned with application and maintenance of quality standards for industrial processes, materials and products. Essential Functions of the Job: The essential functions of this job require the person, with or without reasonable accommodations, to perform the following: * Perform statistical analysis and study to determine if the current processes are meeting the customer specifications. * Perform repeatability and reliability tests on tooling. * Coordinate programs to recognize and reward groups or individuals for suggestions and actions related to process improvement. * Direct workers engaged in measuring and testing product and tabulating data concerning materials, product or process quality and reliability. * Develop and initiate standards and methods for inspection, testing and evaluation. * Compile and write training material and conduct training sessions on quality control activities. * Provide training in the use of measuring equipment and proper procedure for first article inspection. * Monitor own work to ensure quality during testing sequences and calibration procedures for instruments and equipment. * Test and calibrate electrical, mechanical, electromechanical and electronic measuring instruments and equipment for conformance to established standards. Assist in formulating calibration standards. * Demonstrate accuracy and thoroughness when measuring parts for conformity and specifications. * Use advanced math skills when devising formulas to solve problems with measurements and calibrations. * Speak clearly when assisting Engineers in formulating test, calibration, repair and evaluation plans and procedures to maintain precision accuracy of measuring, recording and indicating instruments and equipment. * Lift or move up to 50 pounds when comparing product with parts list or sample model to ensure assembly is complete. * Verify specified dimensions of product or material. * Reject defective parts and mark defect type on part, container of parts and inspection tag. * Use the following software when performing this job: MAC-PAC, Database Management, Microsoft Excel, Word, PowerPoint and Access. * Perform all other duties as assigned. Recommended Education and/or Experience High School Diploma or Equivalent; or minimum six months related experience.

Basic Qualifications Requires a Bachelor's degree in Manufacturing or Industrial Engineering, or a related Science, Engineering, Technology or Mathematics field. Also requires 5+ years of job-related experience, or a Master's degree plus 3 years of job-related experience. CLEARANCE REQUIREMENTS: Department of Defense Secret security clearance is obtainable within a reasonable amount of time after hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position As an Advanced Manufacturing Engineer at Pittsfield, Massachusetts, you'll be a member of a highly motivated cross functional team responsible for overcoming daily production challenges and continuously delivering on commitments. You are encouraged to apply if you have the knowledge and skills to develop, implement and maintain methods, operation sequence and processes in the manufacturing or fabrication of parts, components, sub-assemblies and final assemblies. Our Advanced Manufacturing Engineer will work collaboratively with fellow Manufacturing Engineering staff to continuously improve manufacturing process performance, transfer new products into production, product and problem diagnosis and repair. Support the development, qualification, verification, and validation of changes to existing product and manufacturing processes. Maximizes efficiency by analyzing equipment layouts, workflow, assembly methods, and work force and equipment utilization. Develops short-term and long-term operational strategies in partnership with team members and provides input necessary for the successful design, development, and execution of that strategy to achieve measurable outcomes in a timely, cost-effective manner. Primary responsibilities will include, but are not limited to, the following: Identify and improve the results of manufacturing and operational processes to improve efficiencies, reduce cost and increase customer satisfaction. Ensure the assigned operational processes are always capable to satisfy all GDMS, regulatory and industry requirements, and expectations applicable to our organization. Provide daily on-the-floor technical support working closely with Cell Leads, Supervisors, and fellow Engineers. Lead in conjunction with Quality personnel the MRB team meeting for analysis, material disposition, containment, and corrective actions definition. Lead in the selection, installation, and validation of process/packaging equipment utilizing project management tools, Risk Analysis, and Lean Manufacturing techniques. Develop and update existing manufacturing processes. Determine in-process testing and product final inspection requirements. Provide technical guidance to troubleshoot and remediate problems with existing production processes to ensure throughput. Ensure consistent operation and continuous adequacy of test equipment and test methods. Write process deviation and rework instructions as required. Responsible for creating and maintaining key process documentation such as Work Instructions, Workbooks, Routings, among others. Support the development of process documentation for new product(s) and changes to existing product(s). Responsible for setting up proper calibration plans for equipment and test equipment. Support process and design validation and equipment qualification tasks in association with project and engineering team(s). Early engagement in managing Production Readiness activity. Conduct review(s) to ensure that the documentation, production processes, test methods, production specifications, tooling and training are in place to support a controlled production environment. Responsible for improving manufacturing efficiency by analyzing and planning workflow, space requirements, and equipment layout. Responsible for Facility/Utility/Environment Design readiness with respect to introduction of new process to the manufacturing platform. Responsible for coordinating the creation of label templates in Brady Workstation or equivalent software. Support the engagement of the appropriate production personnel through process development to foster early learning and robust process transfer to production. Support fellow Manufacturing Engineers and Trainers to support the creation execution of SWIs and training. Analyze new designs for manufacturability; collaborate to improve product design related to enable process. Provide technical guidance to compose detailed machine specification documents. Support the procurement and installation of equipment to support existing equipment replacement. Collaborate with internal and external fabrication resources to ensure tooling builds are successful. Collaborate with fellow Manufacturing Engineers related to component builds, process and BOM development and other related activities. Utilize lean manufacturing tools to improve efficiency and quality of manufacturing operations. Review of proposed component tolerances and input to manufacturing capability. Engage in development and approval of packaging concepts for manufactured devices and/or subcomponents. Promote clear process communication and support training of assembly, test and inspection personnel. Promote communication, visibility, and accountability of transfer activity within team members and to key stakeholders. Provide critical input, analysis, support, and approval on engineering documentation; participate in design reviews. Maintain expertise in all GDMS products, their design details, product structure (BOM), manufacturing processes, and associated risks. Serve as subject matter expert for applicable areas of audits. Provide solutions to vendor issues as required. Additional Responsibilities: Ensure conformance to the Quality Policy and Quality System procedures. Establish and maintain strong communication across functional areas without direct management responsibilities. Research, develop, and implement necessary systems, competencies, and tools required to improve capability and capacity of the team. Responsible for the appropriate record keeping of project outputs in accordance with recognized GDMS procedures. Provide input on and support for capital equipment purchases including tools and software. May need to work long hours when necessary to complete time sensitive projects. All other duties as assigned. What sets you apart: Outstanding communication skills to interface with various engineering disciplines, manufacturing, senior leadership and our business development teams Recognized as an expert in your field Ability to multi-task Resolves complex problems through the use of ingenuity and creativity Our Commitment to You: An exciting career path with opportunities for continuous learning and development. Competitive benefits, including 401k matching, flex time off, paid parental leave, healthcare benefits, health & wellness programs, employee resource and social groups, and more See more at gdmissionsystems.com/careers/why-work-for-us/benefits Workplace Options: This position is fully on-site where you will be part of the Pittsfield, Massachusetts team. Salary Note This estimate represents the typical salary range for this position based on experience and other factors (geographic location, etc.). Actual pay may vary. This job posting will remain open until the position is filled. Combined Salary Range USD $111,123.00 - USD $123,278.00 /Yr. Company Overview General Dynamics Mission Systems (GDMS) engineers a diverse portfolio of high technology solutions, products and services that enable customers to successfully execute missions across all domains of operation. With a global team of 12,000+ top professionals, we partner with the best in industry to expand the bounds of innovation in the defense and scientific arenas. Given the nature of our work and who we are, we value trust, honesty, alignment and transparency. We offer highly competitive benefits and pride ourselves in being a great place to work with a shared sense of purpose. You will also enjoy a flexible work environment where contributions are recognized and rewarded. If who we are and what we do resonates with you, we invite you to join our high-performance team! Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans

**Country:** United States of America ** Onsite **U.S. Citizen, U.S. Person, or Immigration Status Requirements:** U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract. **Security Clearance:** None/Not Required Pratt & Whitney is working to once again transform the future of flight-designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we're seeking the people to drive it. So, calling all curious. Come ready to explore and you'll find a place where your talent takes flight-beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we'll welcome you into a tightknit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that's evolving fast to the future. At Pratt & Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond? **What You Will Do:** The **Product Delivery Center Quality Engineer** will support activities during the assembly and test phases of production on site on 1st shift at Middletown, CT Product Delivery Center (PDC). The PDC Quality Engineer will coordinate with Production, Engineering, Customer Support, Test Engineering, and other functional disciplines to facilitate the assembly through shipping of engines. The PDC Quality Engineer will approach problem solving with innovation and develop timely action plans for resolution. The PDC Quality Engineer will coordinate the implementation of corrective actions associated to the developed action plans. **What You Will Do:** + Investigate and analyze any hardware/assembly concerns causing assembly and delivery issues by reviewing procedures, specifications, instructions, processes, and equipment to ensure compliance to applicable drawing, specifications, and standards to resolve issues. + Address any nonconformances in a timely manner and provide details to allow for resolution; work multiple priorities simultaneously to prevent or minimize work stoppages. + Partner with the flow-line managers to ensure full support of the product and delivery to customers. + Coordinate quality projects and initiatives between assembly and test product line personnel, and support organizations with a focus on strategic activities aimed at improving the quality signature of the PDC. + Establish and execute quality plans for configuration compliance, non-conformance reduction, and customer satisfaction; participate in PDC compliance audits. + Generate, maintain, and provide quality metrics to the P&W Management team and oversee quality improvement programs; serve as liaison to government and customer representatives for the Quality discipline as needed. + Create process flow documents to be submitted to various government agencies and customers for their review and acceptance; create working relationship and strong lines of communication between multiple shifts supporting the PDC. **Qualifications You Must Have:** + Bachelor's Degree in a STEM or Business field and 5 or more years' experience in an engineering, manufacturing operations, materials management, project management, quality or closely related industrial environment OR a Masters' Degree and minimum 3 or more years' experience in an engineering, manufacturing operations, materials management, project management, quality or closely related industrial environment. + Experience with Microsoft Office programs (Word, Excel, Outlook, etc.). + Experience managing multiple competing priorities simultaneously with ability to obtain, organize and analyze quality data. + Understanding of Lean Manufacturing concepts and/or experience with Kaizen events and/or experience with a continuous improvement program (CORE, 6σ); Value Stream Mapping, Workplace Organization, Continuous Flow Manufacturing, Total Productive Maintenance, DIVE, RCCA, Mistake Proofing, QCPC, etc. + U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract. **Qualifications We Prefer:** + Quality system knowledge, familiarity with SAP system transactions, and the ability to query data from enterprise database systems are preferred. + Ability to understand technical data, such as manufacturing, or part drawings. + Knowledge of aerospace quality standards including AS9100, AS9102, & ISO. + Knowledge of quality systems and familiarity with SAP System transactions. + JCL2 certified or willing to acquire certification. + Working knowledge of Federal Aviation Regulations regulatory requirements or work experience with government regulatory agencies. **Learn More & Apply Now:** In addition to transforming the future of flight, we are also transforming how and where we work. We've introduced role types to help you understand how you will operate in our blended work environment. **Onsite:** Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance workers, as they are essential to the development of our engines. **_As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote._** The salary range for this role is 82,000 USD - 164,000 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. _RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act._ **Privacy Policy and Terms:** Click on this link (******************************************************** to read the Policy and Terms Raytheon Technologies is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class.

Country: United States of America Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract. Security Clearance: None/Not Required Pratt & Whitney is working to once again transform the future of flight-designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we're seeking the people to drive it. So, calling all curious. Come ready to explore and you'll find a place where your talent takes flight-beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we'll welcome you into a tightknit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that's evolving fast to the future. At Pratt & Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond? What You Will Do: The Product Delivery Center Quality Engineer will support activities during the assembly and test phases of production on site on 1st shift at Middletown, CT Product Delivery Center (PDC). The PDC Quality Engineer will coordinate with Production, Engineering, Customer Support, Test Engineering, and other functional disciplines to facilitate the assembly through shipping of engines. The PDC Quality Engineer will approach problem solving with innovation and develop timely action plans for resolution. The PDC Quality Engineer will coordinate the implementation of corrective actions associated to the developed action plans. What You Will Do: Investigate and analyze any hardware/assembly concerns causing assembly and delivery issues by reviewing procedures, specifications, instructions, processes, and equipment to ensure compliance to applicable drawing, specifications, and standards to resolve issues. Address any nonconformances in a timely manner and provide details to allow for resolution; work multiple priorities simultaneously to prevent or minimize work stoppages. Partner with the flow-line managers to ensure full support of the product and delivery to customers. Coordinate quality projects and initiatives between assembly and test product line personnel, and support organizations with a focus on strategic activities aimed at improving the quality signature of the PDC. Establish and execute quality plans for configuration compliance, non-conformance reduction, and customer satisfaction; participate in PDC compliance audits. Generate, maintain, and provide quality metrics to the P&W Management team and oversee quality improvement programs; serve as liaison to government and customer representatives for the Quality discipline as needed. Create process flow documents to be submitted to various government agencies and customers for their review and acceptance; create working relationship and strong lines of communication between multiple shifts supporting the PDC. Qualifications You Must Have: Bachelor's Degree in a STEM or Business field and 5 or more years' experience in an engineering, manufacturing operations, materials management, project management, quality or closely related industrial environment OR a Masters' Degree and minimum 3 or more years' experience in an engineering, manufacturing operations, materials management, project management, quality or closely related industrial environment. Experience with Microsoft Office programs (Word, Excel, Outlook, etc.). Experience managing multiple competing priorities simultaneously with ability to obtain, organize and analyze quality data. Understanding of Lean Manufacturing concepts and/or experience with Kaizen events and/or experience with a continuous improvement program (CORE, 6σ); Value Stream Mapping, Workplace Organization, Continuous Flow Manufacturing, Total Productive Maintenance, DIVE, RCCA, Mistake Proofing, QCPC, etc. U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract. Qualifications We Prefer: Quality system knowledge, familiarity with SAP system transactions, and the ability to query data from enterprise database systems are preferred. Ability to understand technical data, such as manufacturing, or part drawings. Knowledge of aerospace quality standards including AS9100, AS9102, & ISO. Knowledge of quality systems and familiarity with SAP System transactions. JCL2 certified or willing to acquire certification. Working knowledge of Federal Aviation Regulations regulatory requirements or work experience with government regulatory agencies. Learn More & Apply Now: In addition to transforming the future of flight, we are also transforming how and where we work. We've introduced role types to help you understand how you will operate in our blended work environment. Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance workers, as they are essential to the development of our engines. As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 82,000 USD - 164,000 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

Element has an opportunity for a Cleanroom Quality Technician. The Cleanroom Quality Technician is responsible to ensure that all company and customer technical and regulatory requirements are followed within the Precision Cleaning Division. This person will be responsible to ensure processing tanks are cleaned, filtered and meet specification requirements by performing weekly titrations. Cleaning of the cleanroom will be performed on a daily, week, monthly basis to help prevent and eliminate potential risk of foreign object debris. Documents corresponding with each machine will be collected, scanned and organized on a monthly basis. All duties will be communicated with the department manager. Salary: $20- $24/hr DOE Responsibilities Essential Duties and Responsibilities include the following. Other duties may be assigned. • Administers and inventories the certifications of purchased items. • Back up for review & approve PCD finished job certifications. • Works with crafts to dispose of unwanted chemicals and supplies. • Performs a daily, weekly and monthly cleaning of the certified Cleanroom. • Change chemical tanks periodically throughout the week as per schedule. • Is responsible for keeping quality records organized and easily located on company's servers. Administer and perform: • PCD Preventive Maintenance program. • PCD Calibration program. • Updates of the PCD “uncontrolled” within the quality masters' folders. Skills / Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Common knowledge of basic hand tool use. Microsoft Office Skill are a plus. Lifting of up to 25 lbs. is expected. Mechanical aids are available for weights over 25 lbs. Will be exposed to mild alkaline and acidic based detergents and organic solvents. Company Overview Element is one of the fastest growing testing, inspection and certification businesses in the world. Globally we have more than 9,000 brilliant minds operating from 270 sites across 30 countries. Together we share an ambitious purpose to ‘Make tomorrow safer than today'. When failure in use is not an option, we help customers make certain that their products, materials, processes and services are safe, compliant and fit for purpose. From early R&D, through complex regulatory approvals and into production, our global laboratory network of scientists, engineers, and technologists support customers to achieve assurance over product quality, sustainable outcomes, and market access. While we are proud of our global reach, working at Element feels like being part of a smaller company. We empower you to take charge of your career, and reward excellence and integrity with growth and development. Industries across the world depend on our care, attention to detail and the absolute accuracy of our work. The role we have to play in creating a safer world is much bigger than our organization. Diversity Statement At Element, we always take pride in putting our people first. We are an equal opportunity employer that recognizes diversity and inclusion as fundamental to our Vision of becoming “the world's most trusted testing partner”. All suitably qualified candidates will receive consideration for employment on the basis of objective work related criteria and without regard for the following: age, disability, ethnic origin, gender, marital status, race, religion, responsibility of dependents, sexual orientation, or gender identity or other characteristics in accordance with the applicable governing laws or other characteristics in accordance with the applicable governing laws. The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c) “If you need an accommodation filling out an application, or applying to a job, please email ***********************”

As a Receiving Technician, you will be responsible for validating the quality of purchased raw materials and incoming products by conducting receiving inspections. Quality plays a critical role in elevating the performance of the total company by identifying opportunities for improvement in both processes and people and then working closely with leaders and teammates across the organization to take action to make things better each day (systems, processes, people). Document all inspection results consistent with company procedures and customer requirements and issue non-conformances and/or quality notifications for discrepant conditions as required. Maintain accurate records of incoming inspections in accordance with quality control procedures. Collaborate with engineering, purchasing, and quality departments to address and resolve quality issues with incoming goods. Notify relevant teams about non-conforming materials and incoming product. Follow the tag system Fill out, stamp, and sign Quality Inspections Log and file quality records Inspect and verify the quality and quantity of received materials, parts, or products against purchase orders and specifications. Conduct dimensional and visual inspections using tools like calipers, micrometers, gauges, and other measuring equipment. Support all manufacturing concerns in a timely manner Preferred Experience: Familiarity with office and warehouse environments Basic knowledge of Aerospace specifications Material handling experience, using a Forklift and Overhead Crane Must possess the ability to use and operate the following equipment and tools: Coil Cart, Micrometer, Calipers, Scale, Bander, Bander Cutters, Side Loader 1-2 year quality-related experience and/or training is preferred BENEFITS: Competitive Premiums on Health and Dental Insurances Vision Insurance for team members Boot and prescription safety glasses allowance PTO after 30-days Paid Holidays Quarterly Bonus Program 401k Match

Element has an opportunity for a Cleanroom Quality Technician. The Cleanroom Quality Technician is responsible to ensure that all company and customer technical and regulatory requirements are followed within the Precision Cleaning Division. This person will be responsible to ensure processing tanks are cleaned, filtered and meet specification requirements by performing weekly titrations. Cleaning of the cleanroom will be performed on a daily, week, monthly basis to help prevent and eliminate potential risk of foreign object debris. Documents corresponding with each machine will be collected, scanned and organized on a monthly basis. All duties will be communicated with the department manager. Salary: $20- $24/hr DOE Responsibilities Essential Duties and Responsibilities include the following. Other duties may be assigned. * Administers and inventories the certifications of purchased items.• Back up for review & approve PCD finished job certifications.• Works with crafts to dispose of unwanted chemicals and supplies.• Performs a daily, weekly and monthly cleaning of the certified Cleanroom.• Change chemical tanks periodically throughout the week as per schedule.• Is responsible for keeping quality records organized and easily located on company's servers. Administer and perform:• PCD Preventive Maintenance program.• PCD Calibration program.• Updates of the PCD "uncontrolled" within the quality masters' folders. Skills / Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Common knowledge of basic hand tool use. Microsoft Office Skill are a plus. Lifting of up to 25 lbs. is expected. Mechanical aids are available for weights over 25 lbs. Will be exposed to mild alkaline and acidic based detergents and organic solvents. Company Overview Element is one of the fastest growing testing, inspection and certification businesses in the world. Globally we have more than 9,000 brilliant minds operating from 270 sites across 30 countries. Together we share an ambitious purpose to 'Make tomorrow safer than today'. When failure in use is not an option, we help customers make certain that their products, materials, processes and services are safe, compliant and fit for purpose. From early R&D, through complex regulatory approvals and into production, our global laboratory network of scientists, engineers, and technologists support customers to achieve assurance over product quality, sustainable outcomes, and market access. While we are proud of our global reach, working at Element feels like being part of a smaller company. We empower you to take charge of your career, and reward excellence and integrity with growth and development. Industries across the world depend on our care, attention to detail and the absolute accuracy of our work. The role we have to play in creating a safer world is much bigger than our organization. Diversity Statement At Element, we always take pride in putting our people first. We are an equal opportunity employer that recognizes diversity and inclusion as fundamental to our Vision of becoming "the world's most trusted testing partner". All suitably qualified candidates will receive consideration for employment on the basis of objective work related criteria and without regard for the following: age, disability, ethnic origin, gender, marital status, race, religion, responsibility of dependents, sexual orientation, or gender identity or other characteristics in accordance with the applicable governing laws or other characteristics in accordance with the applicable governing laws. The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c) "If you need an accommodation filling out an application, or applying to a job, please email ***********************"

Full-time Description Cadrex is searching for a Quality Technician III to directly support our manufacturing practices through development, evaluation, and continual improvement of processes using quality concepts, principles, and methodologies with the goal of consistently meeting or exceeding customer expectations of quality. KEY RESPONSIBILITIES Release product for shipping by ensuring proper documentation/certifications are provided as outlined by customer requirements Understand and apply basic GD&T concepts ? Proficient in dimensional verification of PPAP and first article parts Provide direct support to the production floor by assisting with interpretation/development of manufacturing related documentation and providing or teaching proper measuring techniques Provide technical inspection of manufactured and raw materials at “receiving” as outlined by the process Collect data, evaluate, and present quality metrics Program and operate FARO & Micro-Vu measurement equipment proficiently Program and run CMM's using PC-DMIS software Audit internal processes including dimensional workmanship and documentation verification Work to establish closed loop cause and corrective action in reaction to customer complaints and internal process failures Trained and efficient in all aspects of the position Work quickly, efficiently, and without quality issues Provide on-the-job training for new quality inspectors with daily responsibilities Support management through implementing and communicating ideas, projects, practices, and decision outcomes to the Quality team Suggest and complete Continuous Improvement Projects Guide, train and develop new hires in Quality Lab for all aspects of the position including work center tasks and Quality tools Administer employee development training for the QA department ? Lead or participate in Quality Walk Audits in Work Center Areas identify and implement continuous improvement process and project improvements Requirements PREFERRED QUALIFICATIONS 5+ years working preferably in a metal fabrication environment under a continuous improvement QMS with hands on inspection or an equivalent combination of education and experience Proficient in reading and interpreting blueprints / engineering drawings Proficient in programming CMM's using PC-DMIS software ? Effectively present information in one-on-one and small group situations to customers, clients, and other employees Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals Ability to compute rate, ratio, and percentage and to draw and interpret graphs EDUCATION Associate degree in related field preferred PC-DMIS Training LOCATION Onsite SCHEDULE M-F WORK ENVIRONMENT While performing the duties of this job, the employee is frequently exposed to work near moving mechanical parts and vibration. The employee is occasionally exposed to the risk of electrical shock. The noise level in the work environment is usually moderate and occasionally loud. PHYSICAL DEMANDS While performing the duties of this job, the employee is regularly required to stand, sit, use hands and fingers, handle or feel, and talk or hear. The employee is occasionally required to sit; climb or balance; stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, color vision, depth perception and ability to adjust focus. CADREX'S CORE VALUES Safety first, rising to the challenge, collaboration, accountability, and doing the right thing TOTAL COMPENSATION INCLUDES Health/dental/vision coverage Employer-paid and supplemental life insurance Short- and long-term disability insurance Generous paid time off and holiday pay Monthly remote work stipend (for remote employees who qualify) 401(k) investment plan, with an employer match of up to 4% Education support program Safety eyeglasses/shoe reimbursement Referral bonuses Bonus plan for all full-time employees ABOUT US CADREX Manufacturing Solutions is a leading provider of complex sheet metal and machined production parts, assemblies, and weldments for a variety of end markets, including electrical transmission and distribution, warehouse automation, technology, aerospace & defense, medical, food, and industrials. With locations in Colorado, Pennsylvania, Illinois, Washington, Wisconsin, Minnesota, Michigan, Indiana, Massachusetts, Oklahoma, and Monterrey Mexico, CADREX offers numerous in-house manufacturing capabilities, including laser cutting, sheet metal fabrication, complex assembly, CNC punching, CNC machining, forming, robotic welding, stamping, fastener insertion, and tool and die manufacturing, to effectively serve customers with lights-out manufacturing capabilities for mid- to high-volume production. For more information, visit *************** Cadrex provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Full-time Description The TSUBAKI name is synonymous with excellence in quality, dependability, and customer service. U.S. Tsubaki is a leading manufacturer and supplier of power transmission and motion control products. As a part of a vast, international network of corporate and industrial resources, Tsubaki offers its customers the finest state-of-the-art products available in the world and we strive to be the “Best Value” supplier in the industry. Essential Duties and Responsibilities: The essential duties and responsibilities of this job are included but not limited to this job description - other tasks may be assigned and expected to be performed. Prepare supporting data and documentation for Capital Appropriation approval request forms Create and maintain shop routings for components and chain assemblies. Create product structures by assigning and calculating raw material for components. Provide tooling cost for job quotations. Provide run time standards and estimates for job quotations. Maintain new and existing tooling database. Maintain records for wastewater treatment, discharge, chemical purchasing and usage. Manage database for item master and item site planning information. Manage the database for work centers/departments. Installation and maintenance of all cost and performance standards. Perform occupied time studies for machine and labor run time standards. Perform cost analysis of product Analyze manufacturing processes and determine Return on Investment (ROI) for project justification. Participate in Design Review meetings with Product and Design Engineers. Respond to customer inquiries, escalating manufacturing and delivery issues as appropriate. Other tasks, projects and functions as assigned. Requirements Bachelor's Degree in industrial or Manufacturing Engineering preferred. 4 or more years of related work experience. Knowledge of lean manufacturing and an understanding of rates and cycle time Proficient in Microsoft Office Print interpretation including GD&T Knowledge of engineering principles Ability to travel, if needed Learn more about U.S. Tsubaki at: ************************* U.S. Tsubaki offers a competitive compensation and benefits package, including health benefits effective on date of hire, dental and vision benefits effective on the first of the month following date of hire, Paid Time Off ("PTO"), 10 paid holidays, generous 401(k) match and profit sharing, annual bonus potential, life insurance, short and long-term disability, flexible spending accounts, commuter benefits, education reimbursement, home and auto insurance discounts, and pet insurance. The estimated salary range is meant to reflect an anticipated salary range for the position. We may pay more or less than of the anticipated range based upon market data and other factors, all of which are subject to change. Individual pay is based on location, skills and expertise, experience, and other relevant factors. Tsubaki is an Equal Opportunity Employer - Minorities/Females/Veterans/Disability PM21 Salary Description $80,000 - $100, 000 / year

Our client located in Turners Falls, MA is looking for a Quality Technician to join their growing team! High school diploma or equivalent Previous manufacturing experience preferred Technical aptitude, attention to detail, and ability to use measuring tools Ability to lift up to 50 lbs. Benefits you will receive as the Quality Technician: $20-$22/hour, depending on experience, plus $2.50/hour shift differential 12-hour rotating overnight shifts Great benefits day 1 upon hire For the Quality Technician position your duties will include: Perform visual and physical quality checks using calipers and take measure Complete documentation Ensure compliance with customer specifications and quality standards Other tasks as assigned Are you interested in growing your quality career? We want to hear from you! To apply for this position, please email your resume to *****************, call ************ or apply online at *************** We are here to help! For your convenience, Masiello Employment Services offers phone & video interviews/meetings. We can't wait to virtually meet you!

Job Description Dennis Group's Process Engineers are key in our projects of designing and building food and beverage processing facilities. Process Engineers work in every aspect of a project - controls, packaging, mechanical, electrical, building system, architecture, etc., from the conceptual stages to design completion, and throughout construction. They provide expertise in flow diagrams, alterations, constraints, piping and instrumentation diagrams (P&ID), layout, install, and commissioning and start-up. Process Engineers enable operational efficiencies for the food and beverage process plants of our clients. Responsibilities will include, but not be limited to: Responsibilities Develop process design basis and select unit operations Develop operation specifications Coordinate with other project disciplines (engineers, designers, architects, etc.) Prepare process flow and piping and instrumentation diagrams Create process flow diagrams Prepare mass and energy balances Size and specify process and process utility equipment Equipment procurement and bid evaluation Assist project management with the development of project scope, budget and schedule for all process related work Help to coordinate the schedules and work of contractors for process equipment installation Work with clients, vendors, and suppliers to develop cost estimates and proposals Provide client assumptions on supply recommendations Develop process and instrumentation drawings (P&IDs) Oversee process and utility equipment installations Provide onsite construction start-up and commissioning support Research process engineering best practices Supporting talent growth within our organization Required Education Skills and Experience Bachelor's degree in Chemical or Process Engineering. 0-3 years of work experience or schooling developing process designs 0-3 years of work experience or schooling preparing process flow diagrams and P&IDs 0-3 years of work experience or schooling sizing and specifying process and process utility equipment. 0-3 years of work experience or schooling developing project scopes, budgets and process-related work schedules Co-op, intern or work experience with professional services, process engineering, and food and beverage firms is a plus Interest in food safety and sanitary design principles and a desire learn about various food and beverage industry standards, practices, and regulations Proficiency with MS Office, MS Project, and AutoCAD Excellent oral and written communication skills with proven client interaction and experience Must meet Travel Requirement - On-site construction project coordination and management with travel requirements between 30-50% of the year Physical Requirements Prolonged periods sitting at a desk and working on a computer. Must be able to lift-up to 15 pounds at times. Travel Requirement Up to 50% travel required to visit project site and other offices. About Us We plan, design, engineer, and build food plants for major brands across the country and the world. For the past three decades, we've focused exclusively on the food and beverage industry, helping your favorite brands put your favorite foods in the grocery store. Simply put, food isn't one thing we do, it's all we do. Dennis Group offers competitive compensation packages commensurate with experience. We provide comprehensive employee benefits including medical, dental, vision, life and disability insurance, paid time off including an open vacation policy, as well as bonus, profit-sharing, and retirement plans. Dennis Group is proud to provide equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or genetics.

Linde Advanced Material Technologies Inc. Quality Technician - Inspector Manchester, CT, United States | req26453 1st shift, Monday-Friday 07:00am - 03:30pm What you will enjoy doing* * You will perform inspections, as well as in-process and final inspection of parts and assemblies in accordance with applicable engineering standards * In this role you will inspect parts using precision measurement equipment/devices * You will assist engineering and operations in the investigation of non-conformities * In this role you will also play a part in contract review of customer orders ensuring adherence to all applicable specifications * You are responsible for ensuring proper documentation including fine print details on all product certifications What makes you great * High Diploma or GED is required for this role * The ideal candidate will have 3 - 5 years of aviation experience and 2 years of inspection experience applying GD&T Principles and practices * Knowledge of ISO9001 & AS9100 Quality Management systems; working knowledge of First Article Inspection requirements per AS9102 * Proficient in Microsoft Office Suite * You have knowledge of common inspection measuring equipment is also a plus Why you will love working with us Linde Advanced Material Technologies, formerly Praxair Surface Technologies, is a company that revolutionizes industries through innovative materials and surface coatings. We are leaders in advanced materials and offer metal powders, sputtering targets, and surface coatings that enhance performance across various sectors. Our strong focus on innovation is evident in our superior technologies for the aerospace, energy, semiconductor, automotive, and industrial industries. Linde employees learn and abide the Linde Code of Ethics and Code of Conduct by demonstrating honesty, integrity, professionalism in all communications, actions, and decisions. What we offer you! At Linde, the sky is not the limit. If you're looking to build a career where your work reaches beyond your job description and betters the people with whom you work, the communities we serve, and the world in which we all live, at Linde, your opportunities are limitless. Be Linde. Be Limitless. Linde offers competitive compensation and an outstanding benefits package. Enjoy access to health, dental, disability, and life insurance, paid holidays and vacation, 401(k) matching, pension benefits, an employee discount program, and opportunities for educational and professional growth. Additional compensation may vary depending on the position and organizational level. Build your future with us while making an impact every day! Have we inspired you? Let´s talk about it We are looking forward to receiving your complete application. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, disability, protected veteran status, pregnancy, sexual orientation, gender identity or expression, or any other reason prohibited by applicable law. Linde Advanced Material Technologies Inc. abides by applicable export control laws including the Export Administration Regulations (EAR) and the International Traffic in Arms Regulations (ITAR) in accordance with the company's export control procedures. As such, persons considered for this position must be either a U.S. Citizen, Permanent Resident (green card holder) or otherwise classifiable as a U.S. person under relevant regulations. Linde Advanced Material Technologies Inc. acts responsibly towards its shareholders, business partners, employees, society and the environment in every one of its business areas, regions and locations across the globe. The company is committed to technologies and products that unite the goals of customer value and sustainable development. * The above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties and skills required of employees assigned to this position. Therefore employees assigned may be required to perform additional job tasks required by the manager. #LI-JD1

Our client, a well-established precision manufacturing organization is looking for a Manufacturing Process Engineer to support the development and optimization of production processes for both new and existing products. Key Responsibilities Develop, assess, and refine manufacturing methods to support new product introductions and ongoing production Translate customer requirements and technical documentation into efficient, repeatable manufacturing processes Investigate and resolve production challenges related to machining, tooling, and equipment performance Design and improve fixtures, tooling, and process layouts to enhance quality and throughput Create and maintain detailed process documentation, including operation sheets and engineering drawings Collaborate cross-functionally with internal teams, suppliers, and customers to support production needs Review and implement engineering changes and manufacturing documentation updates Analyze production data and technical specifications to evaluate manufacturability and process capability Apply continuous improvement principles to reduce waste, improve efficiency, and increase capacity (e.g., root cause analysis, setup reduction, standard work, error-proofing) Qualifications Bachelor's degree in Engineering or a related technical discipline (materials, metallurgy, or similar preferred) 5+ years of experience in a manufacturing engineering role within a regulated or high-precision environment (aerospace experience strongly preferred) Familiarity with quality management systems such as ISO 9001 and/or AS9100 Proficiency with CAD/CAM tools (e.g., SolidWorks, Mastercam) and ERP/MRP systems Strong analytical and problem-solving skills with the ability to collaborate effectively in a team setting Practical machining knowledge or hands-on manufacturing background

Title: Manufacturing Technology Project Engineer The Manufacturing Technology Project Engineer is responsible for improving manufacturing processes by evaluating and implementing advanced engineering technologies, equipment and tooling. Oversee the procurement and implementation of manufacturing technologies within Deringer-Ney, Inc. to improve quality, efficiency and cost. Supervisory Responsibilities: None. Duties/Responsibilities: Identify and evaluate potential equipment and tooling suppliers, manage the sourcing process to secure high-quality equipment and tools at optimal cost and delivery terms. Prepare return of investment analysis to justify investment in selected technology, equipment and tooling. Work closely with internal teams (design, process and quality engineers, maintenance, etc.) to facilitate and manage overall project implementation through IQ/OQ/PQ process Foster strong relationships with vendors and oversee the design, development and fabrication of manufacturing equipment and tooling. Ensure manufacturing solutions meet the required quality standards, certifications, regulatory requirements, customer specifications, production timelines and budget. Support the Design Engineers by suggesting ideas to make the detail components or assemblies more cost effective and producible Required Skills/Abilities: Strong understanding of manufacturing processes (e.g. wire draw, strip rolling, stamping , machining, plastic injection molding). Knowledge of quality control standards and regulatory compliance, especially in medical and automotive sectors. Excellent communication, problem-solving, and project management skills. Ability to work collaboratively in a cross-functional team environment. Education and Experience: Bachelor's degree in materials science (metallurgy), mechanical engineering or Industrial Engineering. Minimum 5 years of manufacturing experience in production environment. Experience as a Metallurgy Manufacturing Engineer is strongly preferred. Physical Requirements: Prolonged periods of sitting or standing. Must be able to lift 15 pounds at times. Must be able to access and navigate each department at the organization's facilities.

Job DescriptionAbout UFP MedTech: UFP Technologies is a designer and custom manufacturer of comprehensive solutions for medical devices, sterile packaging, and other highly engineered custom products. UFP is an important link in the medical device supply chain and a valued outsource partner to most of the top medical device manufacturers in the world. The Company's single-use and single-patient devices and components are used in a wide range of medical devices and packaging for minimally invasive surgery, infection prevention, wound care, wearables, orthopedic soft goods, and orthopedic implants. UFP Technologies, Inc. offers a competitive benefits package, including but not limited to: Medical, Dental, Vision, Life, Disability Insurance 401K with a matching contribution Paid time off, Paid holidays, Employee discounts and much more! Location: This position will be on-site full-time in Chicopee, MA. The position holder will need to be within commuting distance (within 45 min). Quality Technician Summary: The Quality Technician performs diversified duties to monitor and ensure the proper quality testing of company products. This role provides support related to corrective action containment, component measurement / testing, product certification and administrative tasks. Quality Technician Essential Duties and Responsibilities: Audits quality testing and documentation completed by operators, and reviews quality testing results to ensure proper testing has been conducted, results properly recorded and that results are within specification and without documentation errors. Reads, reviews and interprets statistical run charts to detect trends in product quality line fall-off and report to appropriate personnel. Ensures all ISO or other quality standards and procedures are being followed. Authorizes release of finished goods based on quality audits. Participates in Root Cause Investigations and provides corrective actions to customer SCARs. Conducts any required special testing, failure analysis, etc. Provides instruction, guidance and direction for manufacturing employees in determining acceptable products. Performs regularly scheduled calibration of measuring and test equipment and arrange external calibration services. Performs all other duties as assigned or needed. Quality Technician Qualification Requirements: High school diploma, and 2+ years of related work experience. Experience with Quality Standards - ISO 9001 and / or ISO 13485. Bi-lingual in Spanish strongly desired. Able to read and understand blueprints and other specifications. Able to use micrometers, calipers, video measuring equipment and other common inspection tools. Basic knowledge interpreting SPC control charting. Ability to interact with different levels of the organization. Strong oral communication and interpersonal skills. Experience with Microsoft Office applications. UFP Technologies, Inc. is an Equal Opportunity/Affirmative Action employer Minorities/Women/Veterans/Disabled. #UFP #MEDTECH #CHIC

Job Description Join the worldwide leader in playing cards and in “play” solutions. Play is what keeps us going, and it always has been our greatest motivation. That's why we live different, play different. The Quality Technician Level 2 plays a crucial role in maintaining the high standards in the production process. They utilize their skills and knowledge to inspect products or processes to ensure they meet predefined specifications and recommend improvements with the goal of delivering high quality products to our customers. What You'll Do as a Quality Technician Level 2: Complete visual and or mechanical inspections of product and processes Use measuring instruments, along with fixtures and gauges to determine product quality. Perform essential functions of In-Process, Final Assembly, and Incoming inspections including recording inspection data to the specified documents or electronic data bases. Perform defect tracking and analysis to ensure appropriate corrective actions are implemented upon identification of a defect. Use sampling plans to determine the correct samples required from a Lot of product. Process audit data and DMR's electronically in the ISO9001 ISIR Corrective Action System. Perform Finished Goods Warehouse audits. Perform all aspects of the FEP Samples Assembly process and QSAM audits process. Technicians are required to be knowledgeable in Q-S.A.M. work instructions. We're Looking for a Quality Technician Level 2 with: Previous experience as a Quality Technician Knowledge of sampling plans for inspection Functional knowledge of calibration requirements, preferably related to games manufacturing Understanding of systems used to submit product samples for toxicity & certification testing. Trained to use instrumentation and ability to record the measured data. Computer skills to recording required inspection data Solid knowledge of the ISO9001 ISIR Corrective Action System. Ability to transition easily within any of the Quality areas related to this facility. Benefits a The Quality Technician Level 2 Can Expect from Cartamundi: Competitive pay Climate controlled facility 401(k) with company match Health, dental, and vision insurance starting day one HSA (Health Savings Account) and FSA (Flexible Savings Account) Life insurance Short-Term and Long-Term Disability Paid time off Tuition reimbursement Employee discounts on daycare, gym memberships, travel, and much more Physical requirements and working conditions: Our manufacturing Plant is comprised of enclosed office and manufacturing space. This position requires the ability to: Move throughout the entire facility to attend to various issues Work effectively in teams across functional groups with strong communication skills Perform sedentary work on computer systems Lift and transfer materials weighing up to 25 pounds frequently Bend, reach shoulder height, push and pull This Quality Technician Level 2 position is located on-site in our East Longmeadow Facility Apply today and discover the magic of making a difference at Cartamundi! Cartamundi does not discriminate based on race, sex, color, religion, age, national origin, marital status, disability, veteran status, genetic information, sexual orientation, gender identity or any other reason prohibited by law in provision of employment opportunities. This employer participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. For more information on E-Verify, or if you believe that your employer has violated its E-Verify responsibilities, please contact DHS dhs.gov/e-verify . Candidates must be 18 years old to work for Cartamundi. About Cartamundi: At Cartamundi, we're all united by our common belief that world is better with play. Play is what keeps us going, and it always has been our greatest motivation. That's why we live different and play different. To us, it is not just an activity. It is a guiding mindset that reminds us to have fun, to be fair, to connect with people - across cultures and generations - and to embrace shared experiences. We are a worldwide leader in playing cards and in “play” solutions. Our owned brand portfolio includes a suite of heritage brands which go back as far as 1848, including global brands like Bicycle , HRO , Bee , Copag , Shuffle and many locally loved brands. These brands combine craftsmanship with innovation as the basis for their continued relevance and positive contribution to the local communities that love and use these brands. At Cartamundi, we have significant expertise in printing; our presses have been running since 1765. Today, our company has become the largest playing cards and board game manufacturer in the world and the trusted partner of leading toy companies. We make well-known brands such as Monopoly , Uno , Magic: The Gathering , Guess Who , Pokémon , Trivial Pursuit every day. As we look into the future and how entertainment evolves, we are bringing the digital world to the physical world and vice versa. We have a dedicated team of experts that is looking into future technologies, products, applications that can get our consumers and communities to truly live different and play different. We are still a family-owned company with headquarters in Belgium and have a global network of 16 manufacturing facilities, 6 design centers, 1 digital studio and 1 global R&D center.

Job Description Summary: This position is responsible for planning activities concerned with application and maintenance of quality standards for industrial processes, materials and products. Essential Functions of the Job: The essential functions of this job require the person, with or without reasonable accommodations, to perform the following: Perform statistical analysis and study to determine if the current processes are meeting the customer specifications. Perform repeatability and reliability tests on tooling. Coordinate programs to recognize and reward groups or individuals for suggestions and actions related to process improvement. Direct workers engaged in measuring and testing product and tabulating data concerning materials, product or process quality and reliability. Develop and initiate standards and methods for inspection, testing and evaluation. Compile and write training material and conduct training sessions on quality control activities. Provide training in the use of measuring equipment and proper procedure for first article inspection. Monitor own work to ensure quality during testing sequences and calibration procedures for instruments and equipment. Test and calibrate electrical, mechanical, electromechanical and electronic measuring instruments and equipment for conformance to established standards. Assist in formulating calibration standards. Demonstrate accuracy and thoroughness when measuring parts for conformity and specifications. Use advanced math skills when devising formulas to solve problems with measurements and calibrations. Speak clearly when assisting Engineers in formulating test, calibration, repair and evaluation plans and procedures to maintain precision accuracy of measuring, recording and indicating instruments and equipment. Lift or move up to 50 pounds when comparing product with parts list or sample model to ensure assembly is complete. Verify specified dimensions of product or material. Reject defective parts and mark defect type on part, container of parts and inspection tag. Use the following software when performing this job: MAC-PAC, Database Management, Microsoft Excel, Word, PowerPoint and Access. Perform all other duties as assigned. Recommended Education and/or Experience High School Diploma or Equivalent; or minimum six months related experience.