Quality engineer jobs in Elyria, OH - 418 jobs

About the Role Our client is seeking an experienced Safety & Quality Manager to lead plant-wide initiatives that ensure safe operations, high-quality output, and strong process discipline. This role plays a critical part in shaping a culture of accountability, continuous improvement, and proactive risk reduction across the facility. You will partner closely with production, maintenance, engineering, and leadership teams to strengthen safety behaviors, reduce operational risks, and reinforce quality standards throughout all stages of manufacturing. Key Responsibilities Safety Leadership Champion a safety-first culture through coaching, training, and daily engagement with floor teams. Conduct regular facility inspections, risk assessments, incident investigations, and follow-up actions to prevent recurrence. Ensure compliance with corporate and regulatory safety expectations. Lead or support emergency preparedness planning, safety observations, and behavior-based safety initiatives. Quality Management Oversee plant-level quality systems, documentation, and standard operating procedures. Monitor product quality trends, customer feedback, and internal data to proactively address quality risks. Lead root-cause investigations and corrective/preventive actions (CAPA). Collaborate with cross-functional teams on process control, testing standards, and continuous improvement initiatives. Continuous Improvement Drive waste reduction, defect reduction, and efficiency improvement efforts across operations. Facilitate structured problem-solving activities (e.g., root cause analysis, process stabilization). Support team members through coaching and development to enhance quality and safety performance. Lean experience is a plus. Team Collaboration & Leadership Partner with supervisors and operators to ensure consistent adherence to plant policies and quality/safety expectations. Provide training on safety practices, quality procedures, and operational standards. Contribute to daily production meetings, audits, and cross-functional projects. Qualifications Bachelor's degree Experience working in a manufacturing or industrial environment is required. Background in safety, quality, or combined operational roles with demonstrated leadership on the plant floor. Familiarity with regulatory or industry compliance requirements. Strong communication, follow-through, and problem-solving skills. Ability to engage and influence employees at all levels. Benefits 401k PTO Medical Equal Opportunity Employer/Veterans/Disabled To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to ******************************************* The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements

Process Engineer Duration: 1 year contract on-going contract, renewed annually Must Haves: Degree in engineering 2+ years of engineering and manufacturing experience Crankshaft experience 2+ years Process engineering experience: processing machining line from beginning to end. Purchasing and delivering equipment. Experience purchasing and delivering equipment, writing orders to buy equipment, running off equipment, qualifying and running to production. Working knowledge of GD&T; reading engineering drawings Familiarity of Lean Manufacturing principles and Six Sigma Day to Day: Process Engineer specializing in crankshaft manufacturing, you will be responsible for developing, implementing, and optimizing manufacturing processes for crankshafts at the Cleveland Engine Plant. Support development and implementation of Crankshafts and Gears manufacturing systems for new powertrain programs in Ohio. Utilize machining process knowledge, particularly steel and iron metal cutting and grinding to deliver an efficient and optimized process regarding quality, costs, timing, and footprint. Lead equipment installation, power on, run capability, and equipment handover to the powertrain plants. Initiate bids, evaluate, recap bids for equipment purchase; work with Purchasing to write and place orders. Work with OEMs, suppliers, Product, and Plant engineering teams to resolve engineering and program delivery issues. Interface and coordinate project related items such as facilities, safety, ergonomics, material handling & kitting, tooling, and gauging. Support discrete event simulation for constraint analysis; work with Industrial Engineers (IE) to assess and improve throughput. Purchasing and delivering equipment. Writing orders to buy the needed equipment, making sure equipment is designed, run off on supplier floor, run it off, qualifying and running to production. Collaborate with cross-functional teams (Product Development, Suppliers, Launch Programs) to: Generate tooling and facility cost estimates and Improve quality and reduce labor demand Use virtual tools to assess feasibility of new designs for high-volume manufacturing

Job Title: Supplier Audit Specialist - Packaging Pay Rate: $35-45/hr Job Type: Contract Industry Requirement: Packaging Lead supplier audits and risk assessments for packaging suppliers to ensure quality, compliance, and reliable supply. This role focuses on onsite audits, supplier performance evaluation, risk management, and cross-functional collaboration to drive continuous improvement. Key Responsibilities Audit Strategy & Execution Plan and conduct onsite supplier audits for packaging commodities. Evaluate supplier quality systems, processes, capacity, and compliance. Risk Assessment Develop and maintain supplier risk registers. Apply FMEA / Supplier Risk Management tools to identify and mitigate risks. Material, Process & Packaging Validation Assess materials and processes for packaging commodities such as Cloth, Liners, Paper, and Fiber. Supplier Performance Management Use scorecards to track OTD, DPPM, NCRs, audit results, response time, and certifications. Drive supplier performance improvement and maturity. Compliance & Governance Ensure suppliers meet standards such as ISO 9001, ISO 13485, IATF, and related requirements. Stakeholder Collaboration Work closely with internal teams and suppliers to resolve issues and improve outcomes. Required Qualifications Bachelor's degree in Mechanical, Production, Packaging, Industrial Engineering, or equivalent. 8-10 years of experience in supplier auditing or supplier quality within the packaging industry. Proven track record of supplier audits with measurable quality and performance improvements. Core Skills & Competencies Onsite supplier assessments (Quality, Supply Chain, Capacity). Value Stream Mapping; material and process flow analysis. Root cause analysis (5-Why, Pareto, 8D), SPC, and trend analysis. Risk modeling (FMEA/SRM) and dashboard reporting. Strong supplier communication, negotiation, documentation, and stakeholder management. Confident decision-making in fast-paced or ambiguous situations.

Competitive Pay: This position offers an hourly wage ranging from $33.48/hr. to $42.00/hr., depending on experience and qualifications. IFM Quality and Finishing Technician Lead The IFM (Cleaning) Quality and Finishing Technician Lead will provide repair and preventive maintenance services for qualified customer equipment at customer locations. In addition, must have strong, Industrial, Paint commercial HVAC, air quality, and filtration knowledge. Essential Duties and Responsibilities: ● Be the industry expert in a focused application or product line ● Troubleshoot, repair and service customer equipment by diagnosing problems ● Perform product training for customers as part of a preventative maintenance program ● Perform advanced training on equipment for other technicians ● Responsible for providing field service, train customers on basic preventative maintenance, and maintenance support of industrial automation equipment ● Lead Industrial, Paint commercial HVAC preventative maintenance, filtration, and indoor air quality projects. Cleaning of various facility's and process and components ● Answer customer inquiries regarding repair questions ● Prepare documentation regarding work performed and enter in computer ● Establish and maintain relationships with key vendor contacts for service and repair ● Maintain service equipment including performance test before use, document and track use by employees or customers, flush/clean/repair as needed upon return from use, test and put into storage when done. ● Identify, plan, and assist in managing special jobs and projects, as requested ● Participate in product training, as required ● Participate in product demonstrations with salespeople in our lab and in the field. ● Participate in establishment of contracts for repair and maintenance service. ● Assist in lab clean-up and review for safety issues. ● Other duties, as assigned Qualifications ● Ability to lead a technical team ● High school graduation or equivalency; emphasis on office, shop or other skills ● Ability to travel 50% or more; overnight travel may be required ● Minimum 7 years' experience in skilled trades; or proven equivalent experience ● Minimum mold certifications and duct cleaning, or ability to obtain within the first 6 months of role, from primary vendors of the Finishing, Dispensing & Filtration group (Graco, GEMA, Fanuc, Sames, CFT, etc.) ● Minimum 5 years' experience in a focused application or product line ● Minimum 3 years' experience of at least 2 of the following: General Industrial, Paint, Finish, Powder Cleaning, Commercial HVAC, filtration, mold abatement, and duct cleaning. ● Proven mechanical and electrical knowledge sufficient to diagnose and resolve equipment problems ● Proven experience in disassembling equipment needing repair, diagnosing problems, cleaning and refurbishing/replacing parts as needed, reassemble, and test ● Proven experience in using/operating tools such as wrenches, drivers, and power tools ● Proven experience using electrical diagnostic equipment ● Proven experience reading and understanding documents such as policy manuals, safety rules, operating and maintenance instructions, and procedure manuals; ability to write routine reports and correspondence. ● Proven experience in effectively communicating information and responding to questions in person-to- person and small group situations with customers, clients, general public and other employees of the organization. ● Familiarity with 5S ● Proficient in Microsoft Office Suite (Excel, Word, Outlook, Teams) ● Ability to understand written and oral English and be proficient with computer, email, spreadsheets and look up documents online ● Ability to learn and use OTC's computer systems to create and maintain required records regarding equipment repair and service ● Ability to operate forklift, and a pallet jack ● Ability to meet the physical requirements of the job ● Valid driver's license with driving record acceptable to OTC insurance company ● Must be able to work in an environment with possible paint and solvent odors present ● Ability to work in environments that may include: * Moving mechanical parts * Fumes or airborne particles * Painting chemicals and solvents * Electrical equipment Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. ● Requires ability to walk, climb, stand, carry materials, stoop, kneel, bend at waist. ● Maximum unassisted lift = 50 lbs. Average lift less than 50 lbs Competencies To perform the job successfully, an individual should demonstrate the following competencies: ● Adaptability - Ability to be flexible and adjust to changes in your work environment. You can respond quickly to changing ideas, responsibilities, expectations, trends, strategies and other processes. Being adaptable also means possessing soft skills like interpersonal, communication, creative thinking and problem-solving skills. ● Accuracy - Ability to detect errors in normal course of work by standard check or routine crosscheck. Errors resulting from inaccuracy would create minor confusion, delay or expense to correct the situation. ● Dependability - Follows instructions, responds to management direction; Keeps commitments. ● Initiative - Takes independent actions and calculated risks; Looks for and takes advantage of opportunities; Asks for and offers help when needed. ● Customer Service - Responds promptly to customer needs; Solicits customer feedback to improve service; Responds to requests for service and assistance. ● Problem Solving - Displays original thinking and creativity; Meets challenges with resourcefulness; Generates suggestions for improving work; Develops innovative approaches and ideas; Presents ideas and information in a manner that gets others' attention. ● Planning/Organization - Prioritizes and plans work activities; Uses time efficiently; Plans for additional resources; Sets goals and objectives; Develops realistic action plans. ● Communication and Interpersonal Skills - Speaks clearly and persuasively in positive or negative situations; Listens and gets clarification; Demonstrates group presentation skills. ● Collaboration - Ability to work with others to achieve a common goal; Building and maintaining relationships through shared responsibility, respect, and empathy.

At AAM, the POWER is in our people. We believe that an equitable and inclusive workplace benefits everyone, and that the diversity of our Associates drives creativity and innovation. Our global team is made of dreamers, doers and innovators who are Delivering POWER for a safer, brighter and more sustainable tomorrow. Job Posting Title Quality Tech Summary • Must have a minimum of 2-4 years' experience in quality assurance manufacturing environment • SPC experience • Measuring equipment experience including the use of CMM, optical comparator and contour tracer Job Description Performs inspections, measurements and tests on incoming materials, in-process and finished products to insure quality requirements are being met and processes are operating in control throughout the manufacturing process. General Performs inspections, measurements and tests on product and processes at various stages within the manufacturing process (machining and/or forging), including at setup, to determine product and/or material conformance to requirements and specifications. Collects samples for testing, inspection and measurement Perform and conduct material and metallurgical testing Preparation of metallurgical reports Reads, analyzes and uses drawings and blueprints, sample data and other materials in order to determine conformance to requirements of processes, materials and products Setup and use various types of inspection and measurement equipment to validate product and process conformance to requirements and specifications Notifies supervisor or specified personnel of product or process deviations from specifications or requirements Affixes stamps, tags, labels to the appropriate containers or pallets to identify product inspection or acceptability status as necessary Routes nonconforming materials to containment area or to sorting/inspection Records inspection, measurement and test data on designated forms, documents or computer information systems Observes, monitors, and audits production operations processes, operators, part certifiers and equipment to insure proper use of test and measurement equipment and that required work instructions, procedures and processes are being adhered to. Review certificates of compliance and other test reports on gauges, materials and products to determine validity Other Duties As Assigned to include but is not limited to: Temporary Deviations Hold Tags Production Print/Drawing controls First piece forms Support Assist Calibration Technician as needed with calibrations and repairs. Assists in or performs systems, process, product and supplier audits Trains or assist in training others in proper use of inspection, test or measurement equipment Trains or assists in training others in inspection or quality control procedures, work instructions, processes or visual acceptance criteria Assists in developing and implementing various inspection and test processes for determining the acceptability of raw materials, semi-finished and finished products Participates in various cross-functional teams as the quality representative. Involved in continual improvement activities Assists in performing GR&R studies Required Skills and Education High School diploma or GED Ability to work independently or in a team environment. Ability to work well with others Demonstrated problem solving and root cause analysis skills Handle multiple issues at one time. Ability to plan, prioritize and stay organized Strong mechanical inspection background GD&T proficient SPC knowledge and use of SPC software (Mini-tab/MeasurLink) Strong math skills Ability to plan, prioritize and stay organized Able to stand for extended periods of time Able to bend and pick up parts. Able to hold heavy parts (up to 10 pounds) to be measured. Good eyesight (20-20 or corrected) Good powers of observation Office equipment usage MS Office Must be shift flexible (Willing to work weekends) Ability to work well with others Good attendance Negative pre-employment and random drug test About AAM: As a leading global Tier 1 Automotive and Mobility Supplier, AAM designs, engineers and manufactures Driveline and Metal Forming technologies to support electric, hybrid and internal combustion vehicles. Headquartered in Detroit with over 80 facilities in 18 countries, we are Bringing the Future Faster for a safer and more sustainable tomorrow. To learn more, visit AAM.com. Why Join #TeamAAM: As a member of #TeamAAM, you'll get to make a difference on day one. From your first day with us, you'll have the opportunity to grow, embrace challenges, build your skills, and bring your authentic self to work every day, all while helping to shape the future of mobility for AAM…and the world. AAM will not discriminate against any Associate or applicant for employment because of age, race, color, gender, religion, weight, height, marital status, sexual orientation, genetic history or information, gender identity or expression, disability, protected veteran status, national origin, or other characteristic protected by law. AAM will take affirmative action to ensure that applicants are employed, and that Associates are treated equally during employment, without regard to their age, race, color, gender, religion, weight, height, marital status, sexual orientation, genetic history or information, gender identity or expression, disability, protected veteran status, national origin, or other characteristic protected by law. For the Disabled Job Seeker: We offer reasonable accommodations for qualified disabled individuals who are applicants for employment. To request assistance or accommodations, please e-mail *************************. AAM is an equal opportunity/affirmative action employer.

FirstEnergy at a Glance We are a forward-thinking electric utility powered by a diverse team of employees committed to making customers' lives brighter, the environment better and our communities stronger. FirstEnergy (NYSE: FE) is dedicated to integrity, safety, reliability and operational excellence. Headquartered in Akron, Ohio, FirstEnergy includes one of the nation's largest investor-owned electric systems, more than 24,000 miles of transmission lines that connect the Midwest and Mid-Atlantic regions, and a regulated generating fleet with a total capacity of more than 3,500 megawatts. About the Opportunity This is an open position with FirstEnergy Service Co., a subsidiary of FirstEnergy Corp. [FEU] This is an on-site position located in either Akron, OH, Morristown, NJ, Fairmont, WV, or Reading or Greensburg, PA. The job of Substation Design Standards Engineer requires an individual to be self-directed with an interest and / or ability to create and manage engineering designs, equipment and standards for the Substation Engineering group within FirstEnergy. This position will work within a staff of engineers, survey crews, drafters / layouts, both internal and external, engaged in a wide variety of engineering design, from the request for project estimation through construction and record update. This position will report on the progress of design projects and advise of any issues that could impair the successful completion of the project on a proactive basis. This position must provide technical support to Substation and Transmission personnel, Real Estate, Project Management and Construction crews verifying that no safety standards are compromised, checking for accuracy, and monitoring expenditures to ensure projects stay within budget allocation and meet the required in-service date. Responsibilities include: Creating engineering designs and work scope for substation projects and confirming documentation and support is available to necessary personnel. Possible items including steel structures, foundations, clearances, layout drawings, grounding, oil containment, lightning protection, schematics, and wiring diagrams. Ensuring designs support a safe environment for transmission lines and substations personnel, contractors and the general public. Preparing bills-of-material and specifications to procure needed equipment and materials for a substation project. Preparing and filing applications and supporting documentation for engineering permits when necessary. Reviewing NESC clearance requirements and Maintenance personnel and ensure the public safety is protected. Assisting Real Estate in the acquisition of Substation property by coordinating the preparation of sketches, maps, exhibits and easement plans. Directing technical personnel to gather and record data for substation design projects. Working with outside engineering firms, vendors, equipment manufacturers and consultants. Providing engineering support to employees to assist in their learning of standards, procedures, designs, and associated issues. Analyzing engineering issues, structures, equipment, etc., and recommending appropriate solutions and alternate design options. Preparing estimates for proposed projects. Reviewing manufacturer drawings for compliance with specifications. Conducting design reviews, plant audits, and test witnessing at manufacturer's facilities as necessary. Evaluating equipment ratings and requirements, and project schedules to facilitate the accurate ordering of equipment to support project in service dates. Managing equipment orders for Substation projects from the initial request for equipment through delivery (technical details, bid evaluation, schedule, drawing review, design review, action items testing, and delivery). Supporting communication across business units regarding project needs. Convening internal project schedule compliance review meetings with necessary parties to assure deliverables support project schedule and are within the project budget. Researching and exploring new technologies that will effectively enable work processes to be automated increasing efficiencies while decreasing the risk of human error. Ensuring standards and equipment specifications are up to date and accurate, reviewing against industry standards and best practices. Participating in industry meetings to confirm FirstEnergy has a voice in direction of industry (i.e. IEEE, EPRI, etc.). Ability to obtain Engineer in Training and Professional Engineering license is preferred. Future advancement likely linked to ability to stamp and seal engineering design drawings as a Professional Engineer, when necessary. Supporting and sustaining FirstEnergy as a high performing organization by contributing to excellent organizational performance and values of FirstEnergy through responsible effective work performance. Qualifications include: Bachelors of Science degree in Electrical Engineering (BSEE) from an ABET accredited institution is required. Acceptable alternatives are: (1) a Professional Engineer's (PE) License (2) a Bachelor's degree in Electrical Engineering or technical field of study (non-ABET) plus an advanced degree in Electrical Engineering from a university with an ABET accredited Bachelor's program. Professional Engineering (PE) License preferred. Minimum of 2 (two) years of Engineering experience is required. A Fundamentals of Engineering (FE) Certificate Preferred. Working knowledge of applicable computer software necessary to fulfill job duties including but not limited to Microsoft Office and AutoCAD. Knowledge of FileNet, SAP, and Cascade a plus but not a requirement. Valid driver's license and have access to reliable transportation. Must embrace a safety culture and maintain a safe work environment for co-workers and the public. Must be able to manage “multiple projects simultaneously” and be able to work effectively under the pressure of deadlines, unexpected developments, changes in project scope, budget constraints, unforeseen field problems and demands on time for work assignments outside of the normal duties. Must have strong interpersonal skills and develop and maintain relationships across FE, with outside firms and manufacturers that further facilitate the cooperation needed to complete assigned tasks and that will inspire others to achieve, or exceed, goals. Must be able to work independently as well as in teams to coordinate designs with other FirstEnergy areas of responsibility including Siting and Permitting, Project Management, Maintenance, Forestry, Real Estate and Construction, as well as the Regional operating companies Ability to make practical decisions without undue delay and based on the best information available at the time that the decision must be made. Must be able to communicate effectively with good verbal skills and writing skills, providing comprehensive project status reports, clear and concise correspondence, and accurate information. Must possess strong organizational, computer, and problem solving skills. Must be self-directed and not dependent on detailed instruction from others. Ability to support numerous locations, must be willing to travel throughout the service area and to manufacturer locations, and to work extra and irregular hours. FirstEnergy takes a market-based approach to pay, which may vary depending on your location. In addition, your actual base salary will depend on various factors such as your skills, qualifications, and experience. The estimated pay range for this role is $82,000- $118,500. The pay range for certain locations, including the state of New Jersey, include a 20% differential to account for an increased cost of living, making the pay range $98,400 - $142,200. Benefits, Compensation & Workforce Diversity At FirstEnergy, employees are key to our success. We depend on their talents to meet the challenges of our changing business environment. We are committed to rewarding individual and team efforts through our total rewards philosophy which includes competitive pay plus incentive compensation, a company-sponsored pension plan, 401(k) savings plan with matching employer contribution, a choice of medical, prescription drug, dental, vision, and life insurance programs, as well as skills development training with tuition reimbursement. Please visit our website at *********************** to learn more about all of our employee rewards programs. FirstEnergy proudly supports workforce diversity. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, or status as a qualified individual with a disability. No recruiters or agencies without a previously signed contract. Unable to sponsor or transfer H-1B visas at this time. Safety Safety is a core value for FirstEnergy and is essential to all of our business activities. We ensure employees have the tools, information, and processes to perform their duties in a manner that assures safety for themselves, their co-workers, our customers and the public. Our goals are to provide a safe work environment, to maintain an accident-free, injury-free workplace, and to promote and maintain public safety. To meet these goals, we dedicate ourselves to achieving world-class safety standards. Position Classification Exempt

The Quality Technician is responsible for ensuring that all finished products meet quality standards and customer specifications. This role involves conducting inspections, performing tests, documenting results, and working closely with production teams to identify and resolve quality issues. You have the responsibility as an employee at Akro-Mils to make a good quality product to exceed our customer expectations. You have the authority and responsibility to initiate recommendations to resolve problems and continuously improve our Quality Management. Total Quality Management involves all employees at Akro-Mils to be dedicated to participating in improving our processes, our products, and our culture. Quality product starts and ends with you! Take pride in your work by providing a clean & functioning product for our customers. Duties and Responsibilities Quality Inspection & Testing: Perform in-process and final inspections of plastic components to ensure compliance with specifications. Use measuring tools such as calipers, micrometers, gauges, and CMMs to verify dimensions and tolerances. Conduct visual inspections to identify defects such as flash, short shots, sink marks, and contamination. Perform functional and durability tests as required. Process Monitoring & Documentation: Monitor production processes to ensure consistency and adherence to quality standards. Record test results, non-conformances, and corrective actions in quality databases. Maintain accurate and organized inspection reports, control plans, and other quality documents. Defect Investigation & Problem Solving: Work with production and engineering teams to identify the root cause of defects and recommend corrective actions. Support corrective and preventive action (CAPA) initiatives. Participate in internal and external audits to ensure compliance with plant and customer requirements. Compliance & Continuous Improvement: Ensure compliance with company and industry quality standards. Assist in the implementation of quality improvement initiatives such as 5S, Lean, and Six Sigma methodologies. Provide feedback and recommendations to improve product quality and reduce waste. Education and Experience High school diploma/GED One to three month's related experience and/or training; preferred, or equivalent combination of education and experience Computer proficiency (Word & Excel); required Ability to read, understand and use calipers and other test and measuring equipment; required 2 years, or more production experience; preferred Ability to read and interpret documents, such as safety rules, operating and maintenance instructions, and procedure manuals Ability to speak effectively to employees of organization Ability to do two mathematical operations to arrive at the solution Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form Physical Demands The physical demands described herein are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; use hands to finger, handle, or feel; and reach with hands and arms. The employee frequently is required to walk, climb, or balance, and talk or hear. The employee is occasionally required to stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, color vision, peripheral vision, and depth perception. Work Environment The work environment characteristics described herein are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is usually exposed to fumes or airborne particles. The employee is regularly exposed to moving mechanical parts. The employee is regularly exposed to heat and cold and the risk of electric shock. The noise level in the work environment is usually loud.

Join Dura-Line, an Orbia business, in leading the charge for global connectivity! As the premier manufacturer of plastic conduit pipes, we create pathways that connect people and information worldwide in various markets. Every part of the manufacturing process is monitored with environmentally friendly sustainable efforts in mind. Quality, sustainability, and safety are paramount values at Dura-Line. Be part of our mission to Advance Life Around the World. Join Our Quality Team at Dura-Line! Job Title: Dura-Line Quality Technician Shift: Days Location : 860 Garden Street, Elyria, OH 44035 Are you a natural detective with a passion for finding answers? Do you bring experience to the Quality arena and boast a proven attendance record? Can you thrive in a 12-hour shift manufacturing environment? Are you passionate & interested in quality? Then this may be a great fit for you! At Dura-Line, we create what connects us! We're seeking a dedicated Quality Assurance Technician to perform inspections and testing, ensuring compliance with industry standards. Collaborate with our production team to drive continuous improvements and uphold the highest safety and quality standards for our products. Application Instructions: To apply, please submit your resume through our online application portal by clicking the 'Apply Now' button. Ensure your contact information is up to date. Applicants must submit a resume to be considered for the position. Position Details: Schedule: C Shift Days 6:45AM-7:00PM (follows a set 2,2,3 Schedule) Work Environment: Manufacturing, Non-Climate Controlled, Variable Temperatures, Team Oriented, On-The-Job Training Main Responsibilities: Inspect the product during the extrusion process Compare the product with customer specifications Inspect and tag finished product Issue SAP Quality Notifications as required Test incoming raw material and maintain records Operate diagnostic equipment needed to perform job Displays attention to detail necessary to ensure quality products are being produced Follows all safety requirements for the position and all company safety guidelines Completes appropriate paperwork to ensure accurate quality transactions Actively contribute to a fast-paced, high-speed environment, following standardized work and safe practices in a continuous improvement setting. Communicate effectively with team members and support teams to ensure continuous production of high-quality products. Exhibit a team-oriented, goal-driven, and motivated approach. Occupational and Physical Requirements: Around 1 year of experience working in a Quality tech role in a manufacturing environment. Possessing a working knowledge of the resin system is a plus Working knowledge and experience with MS Excel, MS Word, Data Entry for reporting. SAP or ERP inventory system is desirable (centralized enterprise management system), SharePoint Utilize standard tools and measuring devices to ensure the final product meets specifications. Safety-sensitive position. Learn and use laboratory and inspection equipment. Good communication and interpersonal skills. Recognize color spectrum. Ability to step over and/or bend under objects. Lift, push, and pull up to 50 lbs. with or without reasonable assistance. WHAT WE OFFER: Benefits offered on the FIRST DAY OF HIRE!! (MEDICAL, DENTAL, VISION) RETENTION BONUS OFFERED AFTER HIRE : $500 after 90 days and $1,000 after 180 days = $1,500!!!! 401(k) with up to 6% company match! PLUS the company will automatically contribute an extra 3% of your plan-eligible pay!!!!!! The opportunity to participate in a quarterly bonus program that is driven by both company and individual achievements, and our unwavering commitment to safety. Employer Paid Short-Term Disability-YES!!!!!! Employer Paid Long-Term Disability-YES!!!!! Employer Paid Life Insurance-YES!!!!! Work Life Balance-YES!!!! Team Oriented Environment-YES!!!! Accrue up to 120 hours of Paid Time-Off and 56 hours of annual sick pay!! Paid Parental Leave-YES!! Steel Toe and Prescription Safety Glasses Reimbursement (Prescription required) The compensation for this position will typically range from $22.69/hr. The actual base pay offered to the successful candidate will be based on multiple factors, including but not limited to job-related knowledge/skills, experience, geographical location, and internal equity. The compensation package may also include short and long-term incentive compensation. We offer a comprehensive benefits package that includes healthcare coverage, a 401(k) retirement savings plan, paid company holidays, paid vacation time, paid sick time, parental leave, short- and long-term disability leave, and an employee assistance program. At Orbia, we are committed to taking care of our employees and believe in providing comprehensive support so you can thrive at work and home. All employees are subject to pre-employment Background Check and Drug Screening and employment is contingent upon successful clearance of both. Dura-Line is an Equal Opportunity Employer and participates in the federal E-Verify program to verify the work eligibility of all new hires. Dura-Line will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c)

The Quality Technician Trainee will learn and assist with ensuring that products received and manufactured meet company and customer quality standards. This is a hands-on training role ideal for someone with strong computer skills, attention to detail, and an interest in developing a career in quality assurance and manufacturing processes. Essential Functions Learn to perform receiving, in-process, and final inspections on materials and finished products. Assist with first-piece approvals prior to production start-up. Participate in dock audits and other quality checks as assigned. Learn to review control charts and inspection data to ensure product quality remains within control limits. Help identify and document non-conforming materials and support corrective action efforts. Support quality documentation, recordkeeping, and data entry within Epicor (training provided). Assist with new product qualifications and verification that customer requirements are met. Maintain quality files and records in an organized manner. Perform other duties as instructed by the Quality Manager. Additional Responsibilities Participate in training related to process capability studies, AQP, and continuous improvement. Support the Quality team in developing cause and corrective actions for customers, suppliers, or internal rejections. Attend team meetings and contribute ideas for improving quality and efficiency. Qualifications High school diploma or equivalent required; some technical or college coursework preferred. Must be comfortable using computers and learning new software systems (Epicor training provided). Strong attention to detail and accuracy. Basic math skills and ability to follow written and verbal instructions. Reliable, self-motivated, and willing to learn. Ability to read small print and distinguish colors accurately

Job Description Pay: $19-$25 per hour (based on experience) Available Shifts: 1st Shift: 6:00 AM - 3:30 PM 2nd Shift: 3:00 PM - 11:30 PM Weekend Shift: 6:00 AM - 6:00 PM (Friday, Saturday, Sunday) Job Summary The Quality Technician is responsible for supporting quality control activities to ensure products meet company and customer standards. This role involves inspecting parts, documenting results, and working closely with production teams to identify and resolve quality issues. Key Responsibilities Perform inspections of incoming, in-process, and finished products Use measuring tools such as calipers, micrometers, gauges, and other inspection equipment Document inspection results and maintain quality records Identify and report nonconforming materials or quality issues Support root cause analysis and corrective actions Follow all safety, quality, and company procedures Work closely with production and engineering teams to maintain quality standards Qualifications High school diploma or GED required Previous quality, inspection, or manufacturing experience preferred Ability to read blueprints and specifications is a plus Basic math and measurement skills Strong attention to detail and documentation skills Ability to stand, walk, and perform repetitive tasks during shift Why Join Us Competitive hourly pay based on experience Multiple shift options available Stable work environment with growth opportunities

Job DescriptionDescription: Agrati Group is a worldwide leader in fasteners and component solutions. We have 12 production plants, 5 logistic centers and nearly 2300 employees. Investing in people is one of Agrati's strategic assets: This is possible through technical and managerial training, targeted development paths, innovation and improvement projects that involve all employees across the board. Whoever joins Agrati breathes an international context, a dynamic environment, and a strong corporate culture that enhances the specificity of each plant while maintaining a sense of belonging to a historic brand that looks to the future. Our team is constantly looking for passionate, competent people, eager to face new challenges. General Statement of Responsibilities Performs general production duties in a J.I.T. manufacturing system, e.g. - Employee Involvement, Total Quality, Continuous Improvement, Housekeeping, Elimination of Waste, Communication, Coordination, etc. that meets production and customer requirements. Qualification Requirements To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform essential functions. Essential Duties & Responsibilities · Performs inspection of in-process, the final stage, domestic and imported products. · Evaluates and process non-conforming material reports. · Performs shipping audits. · Performs process capability studies and SPC data analysis and makes recommendations based on findings. · Ability to read and understand blueprints. · Evaluates and process materials returned from customers. · Ability to set up measurement equipment. · Ability to perform micro-analysis for microhardness testing and carburization/decarburization analysis. · Ability to successfully train new people. Job Requirements: · High school diploma or equivalent · Previous gauging experience · Knowledge of optical comparator · Basic knowledge of testing and measuring equipment · Previous experience with SPC · Tow motor experience Requirements:

Job Description We're looking for a reliable Quality Technician to support inspection, testing, and documentation of parts and assemblies within a manufacturing environment. Responsibilities include performing in-process and final inspections, identifying and documenting nonconformities, using measurement tools and gauges, and collaborating with production teams to maintain high-quality standards. Candidates should be detail-focused, comfortable interpreting drawings or specifications, and able to follow established quality procedures. Prior experience in manufacturing or quality control is preferred.

We're looking for a reliable Quality Technician to support inspection, testing, and documentation of parts and assemblies within a manufacturing environment. Responsibilities include performing in-process and final inspections, identifying and documenting nonconformities, using measurement tools and gauges, and collaborating with production teams to maintain high-quality standards. Candidates should be detail-focused, comfortable interpreting drawings or specifications, and able to follow established quality procedures. Prior experience in manufacturing or quality control is preferred.

LOCATED IN STREETSBORO OHIO *** About Us: LayerZero Power Systems Inc. is a globally recognized leader in providing state-of-the-art power distribution solutions for critical industries. With a strong focus on reliability, innovation, and customer satisfaction, we deliver advanced power systems products that ensure uninterrupted and dependable power supply in mission-critical environments. Our customer base is comprised of companies in the data center (our main focus), financial, computer service provision, and semiconductor manufacturing sectors LayerZero Power Systems is on a trajectory of sustained growth, with a loyal customer base of existing Fortune 100 customers and an expanding portfolio of new customers. Position Description: Industrial Engineer Multi-Site Continuous Improvement LayerZero Power Systems is seeking an experienced Industrial Engineer to lead continuous improvement initiatives and optimize plant layouts across multiple manufacturing sites. This role involves supporting facility moves, designing layouts using CAD 2D tools, and driving operational excellence through Lean methodologies. The ideal candidate will thrive in a dynamic environment and collaborate with cross-functional teams across different locations. Requirements: Primary Duties: · Develop and implement standardized processes and layouts across multiple facilities. · Coordinate plant moves and expansions at different sites, ensuring minimal disruption. · Identify and execute improvement projects using Lean, Six Sigma, and Kaizen principles. · Analyze workflows to reduce waste, improve efficiency, and enhance quality. · Create and maintain accurate 2D CAD drawings for facility layouts and equipment positioning. · Experience on the systematic management of moving, storing, protecting, and controlling materials and products through the entire supply chain, from raw goods to finished products, using manual, automated, or semi-automated equipment to boost efficiency. · Validate designs with engineering and maintenance teams. · Collect and analyze operational data from multiple sites to support decision-making. · Prepare reports and presentations for leadership on improvement initiatives. · Partner with production, maintenance, safety, and quality teams across all sites. · Support capital projects and vendor coordination. Education: · Bachelors degree in industrial engineering or related field. Requirements Experience & Skills: · 510 years in a manufacturing environment with multi-site responsibility. · Proficiency in CAD 2D design software (AutoCAD or equivalent). · Strong knowledge of Lean Manufacturing and Six Sigma principles. · Ability to calculate and apply FPM/m/s for material flow optimization. · Excellent problem-solving and analytical abilities. · Strong communication and project management skills. · Ability to travel between sites as needed. · Experience with multi-site facility relocation projects. · Familiarity with ERP systems and production planning tools. · Certification in Lean Six Sigma (Green Belt or higher). What We Offer: · Competitive pay with performance incentives · 100% company-paid medical, dental, and vision · 401(k) with company match · 3 weeks PTO, 10 paid holidays, and 2 floating holidays Why You Will Love Working with Us: · Impact: Develop your skills and expertise in a rapidly growing industry, with your work directly influencing the success of mission-critical projects. · Innovation: Immerse yourself in an environment that celebrates forward-thinking and continuous improvement. · Collaborative spirit: Work closely with engineers, marketers, and other professionals to bring ideas to life. · Grow with us: We are committed to your personal and professional development, offering endless opportunities to improve your skills and advance your career At LayerZero, we are proud to be an Equal Opportunity Employer. We welcome and celebrate diversity, and we are committed to creating an inclusive environment for all employees. Compensation details: 110000-125000 Yearly Salary PI2ca79abacfbd-31181-39470846

Job DescriptionTitle: Quality Technician - 1st ShiftType: Temp to HirePay: $24/ hr. Schedule: 6am-2:30pm, Monday - FridayLocation: Wickliffe OH The Quality Technician is responsible for the following listed aspects of quality in the plant. Responsibilities: Assist in maintaining customer drawings and specifications. Provide all necessary paperwork to shop floor for production. Provide all necessary measuring equipment and tools to production. Report and assist in answering any questions on customer specifications brought forth by the production employees. Regularly inspect material being produced. Aid in evaluation that all quality procedures are being followed and implemented. Qualifications: Working knowledge of measurement techniques. Ability to read and interpret blueprints. Ability to communicate techniques to employees. Physical Requirements: Ability to stand for an extended period of time. Some minimal lifting required. Ability to work on the computer for an extended time. #zr

FirstEnergy at a Glance We are a forward-thinking electric utility powered by a diverse team of employees committed to making customers' lives brighter, the environment better and our communities stronger. FirstEnergy (NYSE: FE) is dedicated to integrity, safety, reliability and operational excellence. Headquartered in Akron, Ohio, FirstEnergy includes one of the nation's largest investor-owned electric systems, more than 24,000 miles of transmission lines that connect the Midwest and Mid-Atlantic regions, and a regulated generating fleet with a total capacity of more than 3,500 megawatts. About the Opportunity This is an open position with FirstEnergy Service Co., a subsidiary of FirstEnergy Corp. [FEU] This is an on-site position located in either Akron, OH, Morristown, NJ, Fairmont, WV, or Reading or Greensburg, PA. The job of Substation Design Standards Engineer requires an individual to be self-directed with an interest and / or ability to create and manage engineering designs, equipment and standards for the Substation Engineering group within FirstEnergy. This position will work within a staff of engineers, survey crews, drafters / layouts, both internal and external, engaged in a wide variety of engineering design, from the request for project estimation through construction and record update. This position will report on the progress of design projects and advise of any issues that could impair the successful completion of the project on a proactive basis. This position must provide technical support to Substation and Transmission personnel, Real Estate, Project Management and Construction crews verifying that no safety standards are compromised, checking for accuracy, and monitoring expenditures to ensure projects stay within budget allocation and meet the required in-service date. Responsibilities include: * Creating engineering designs and work scope for substation projects and confirming documentation and support is available to necessary personnel. Possible items including steel structures, foundations, clearances, layout drawings, grounding, oil containment, lightning protection, schematics, and wiring diagrams. * Ensuring designs support a safe environment for transmission lines and substations personnel, contractors and the general public. * Preparing bills-of-material and specifications to procure needed equipment and materials for a substation project. * Preparing and filing applications and supporting documentation for engineering permits when necessary. * Reviewing NESC clearance requirements and Maintenance personnel and ensure the public safety is protected. * Assisting Real Estate in the acquisition of Substation property by coordinating the preparation of sketches, maps, exhibits and easement plans. * Directing technical personnel to gather and record data for substation design projects. * Working with outside engineering firms, vendors, equipment manufacturers and consultants. * Providing engineering support to employees to assist in their learning of standards, procedures, designs, and associated issues. * Analyzing engineering issues, structures, equipment, etc., and recommending appropriate solutions and alternate design options. * Preparing estimates for proposed projects. * Reviewing manufacturer drawings for compliance with specifications. * Conducting design reviews, plant audits, and test witnessing at manufacturer's facilities as necessary. * Evaluating equipment ratings and requirements, and project schedules to facilitate the accurate ordering of equipment to support project in service dates. * Managing equipment orders for Substation projects from the initial request for equipment through delivery (technical details, bid evaluation, schedule, drawing review, design review, action items testing, and delivery). * Supporting communication across business units regarding project needs. Convening internal project schedule compliance review meetings with necessary parties to assure deliverables support project schedule and are within the project budget. * Researching and exploring new technologies that will effectively enable work processes to be automated increasing efficiencies while decreasing the risk of human error. * Ensuring standards and equipment specifications are up to date and accurate, reviewing against industry standards and best practices. * Participating in industry meetings to confirm FirstEnergy has a voice in direction of industry (i.e. IEEE, EPRI, etc.). * Ability to obtain Engineer in Training and Professional Engineering license is preferred. Future advancement likely linked to ability to stamp and seal engineering design drawings as a Professional Engineer, when necessary. * Supporting and sustaining FirstEnergy as a high performing organization by contributing to excellent organizational performance and values of FirstEnergy through responsible effective work performance. Qualifications include: * Bachelors of Science degree in Electrical Engineering (BSEE) from an ABET accredited institution is required. Acceptable alternatives are: (1) a Professional Engineer's (PE) License (2) a Bachelor's degree in Electrical Engineering or technical field of study (non-ABET) plus an advanced degree in Electrical Engineering from a university with an ABET accredited Bachelor's program. * Professional Engineering (PE) License preferred. * Minimum of 2 (two) years of Engineering experience is required. A Fundamentals of Engineering (FE) Certificate Preferred. * Working knowledge of applicable computer software necessary to fulfill job duties including but not limited to Microsoft Office and AutoCAD. Knowledge of FileNet, SAP, and Cascade a plus but not a requirement. * Valid driver's license and have access to reliable transportation. * Must embrace a safety culture and maintain a safe work environment for co-workers and the public. * Must be able to manage "multiple projects simultaneously" and be able to work effectively under the pressure of deadlines, unexpected developments, changes in project scope, budget constraints, unforeseen field problems and demands on time for work assignments outside of the normal duties. * Must have strong interpersonal skills and develop and maintain relationships across FE, with outside firms and manufacturers that further facilitate the cooperation needed to complete assigned tasks and that will inspire others to achieve, or exceed, goals. * Must be able to work independently as well as in teams to coordinate designs with other FirstEnergy areas of responsibility including Siting and Permitting, Project Management, Maintenance, Forestry, Real Estate and Construction, as well as the Regional operating companies * Ability to make practical decisions without undue delay and based on the best information available at the time that the decision must be made. Must be able to communicate effectively with good verbal skills and writing skills, providing comprehensive project status reports, clear and concise correspondence, and accurate information. * Must possess strong organizational, computer, and problem solving skills. * Must be self-directed and not dependent on detailed instruction from others. * Ability to support numerous locations, must be willing to travel throughout the service area and to manufacturer locations, and to work extra and irregular hours. FirstEnergy takes a market-based approach to pay, which may vary depending on your location. In addition, your actual base salary will depend on various factors such as your skills, qualifications, and experience. The estimated pay range for this role is $82,000- $118,500. The pay range for certain locations, including the state of New Jersey, include a 20% differential to account for an increased cost of living, making the pay range $98,400 - $142,200. Benefits, Compensation & Workforce Diversity At FirstEnergy, employees are key to our success. We depend on their talents to meet the challenges of our changing business environment. We are committed to rewarding individual and team efforts through our total rewards philosophy which includes competitive pay plus incentive compensation, a company-sponsored pension plan, 401(k) savings plan with matching employer contribution, a choice of medical, prescription drug, dental, vision, and life insurance programs, as well as skills development training with tuition reimbursement. Please visit our website at *********************** to learn more about all of our employee rewards programs. FirstEnergy proudly supports workforce diversity. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, or status as a qualified individual with a disability. No recruiters or agencies without a previously signed contract. Unable to sponsor or transfer H-1B visas at this time. Safety Safety is a core value for FirstEnergy and is essential to all of our business activities. We ensure employees have the tools, information, and processes to perform their duties in a manner that assures safety for themselves, their co-workers, our customers and the public. Our goals are to provide a safe work environment, to maintain an accident-free, injury-free workplace, and to promote and maintain public safety. To meet these goals, we dedicate ourselves to achieving world-class safety standards. Position Classification Exempt

Join Dura-Line, an Orbia business, in leading the charge for global connectivity! As the premier manufacturer of plastic conduit pipes, we create pathways that connect people and information worldwide in various markets. Every part of the manufacturing process is monitored with environmentally friendly sustainable efforts in mind. Quality, sustainability, and safety are paramount values at Dura-Line. Be part of our mission to Advance Life Around the World. Join Our Quality Team at Dura-Line! Job Title: Dura-Line Quality Technician Shift: Nights Location : 860 Garden Street, Elyria, OH 44035 Are you a natural detective with a passion for finding answers? Do you bring experience to the Quality arena and boast a proven attendance record? Can you thrive in a 12-hour shift manufacturing environment? Are you passionate & interested in quality? Then this may be a great fit for you! At Dura-Line, we create what connects us! We're seeking a dedicated Quality Assurance Technician to perform inspections and testing, ensuring compliance with industry standards. Collaborate with our production team to drive continuous improvements and uphold the highest safety and quality standards for our products. Application Instructions: To apply, please submit your resume through our online application portal by clicking the 'Apply Now' button. Ensure your contact information is up to date. Applicants must submit a resume to be considered for the position. Position Details: Schedule: B Shift Nights 6:45PM-7:00AM (follows a set 2,2,3 Schedule) Work Environment: Manufacturing, Non-Climate Controlled, Variable Temperatures, Team Oriented, On-The-Job Training Main Responsibilities: Inspect the product during the extrusion process Compare the product with customer specifications Inspect and tag finished product Issue SAP Quality Notifications as required Test incoming raw material and maintain records Operate diagnostic equipment needed to perform job Displays attention to detail necessary to ensure quality products are being produced Follows all safety requirements for the position and all company safety guidelines Completes appropriate paperwork to ensure accurate quality transactions Actively contribute to a fast-paced, high-speed environment, following standardized work and safe practices in a continuous improvement setting. Communicate effectively with team members and support teams to ensure continuous production of high-quality products. Exhibit a team-oriented, goal-driven, and motivated approach. Occupational and Physical Requirements: Around 1 year of experience working in a Quality tech role in a manufacturing environment. Possessing a working knowledge of the resin system is a plus Working knowledge and experience with MS Excel, MS Word, Data Entry for reporting. SAP or ERP inventory system is desirable (centralized enterprise management system), SharePoint Utilize standard tools and measuring devices to ensure the final product meets specifications. Safety-sensitive position. Learn and use laboratory and inspection equipment. Good communication and interpersonal skills. Recognize color spectrum. Ability to step over and/or bend under objects. Lift, push, and pull up to 50 lbs. with or without reasonable assistance. WHAT WE OFFER: Benefits offered on the FIRST DAY OF HIRE!! (MEDICAL, DENTAL, VISION) RETENTION BONUS OFFERED AFTER HIRE : $500 after 90 days and $1,000 after 180 days = $1,500!!!! 401(k) with up to 6% company match! PLUS the company will automatically contribute an extra 3% of your plan-eligible pay!!!!!! The opportunity to participate in a quarterly bonus program that is driven by both company and individual achievements, and our unwavering commitment to safety. Employer Paid Short-Term Disability-YES!!!!!! Employer Paid Long-Term Disability-YES!!!!! Employer Paid Life Insurance-YES!!!!! Work Life Balance-YES!!!! Team Oriented Environment-YES!!!! Accrue up to 120 hours of Paid Time-Off and 56 hours of annual sick pay!! Paid Parental Leave-YES!! Steel Toe and Prescription Safety Glasses Reimbursement (Prescription required) The compensation for this position will typically range from $22.69/hr. The actual base pay offered to the successful candidate will be based on multiple factors, including but not limited to job-related knowledge/skills, experience, geographical location, and internal equity. The compensation package may also include short and long-term incentive compensation. We offer a comprehensive benefits package that includes healthcare coverage, a 401(k) retirement savings plan, paid company holidays, paid vacation time, paid sick time, parental leave, short- and long-term disability leave, and an employee assistance program. At Orbia, we are committed to taking care of our employees and believe in providing comprehensive support so you can thrive at work and home. All employees are subject to pre-employment Background Check and Drug Screening and employment is contingent upon successful clearance of both. Dura-Line is an Equal Opportunity Employer and participates in the federal E-Verify program to verify the work eligibility of all new hires. Dura-Line will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c)

Through auditing, assure that products which are received and manufactured, meet specified requirements. Advise appropriate Supervisor or Manager when product does not meet specified requirements and assist in cause and corrective action as required. Essential Functions Responsible to perform receiving inspection on all applicable material. Perform all in-process and final inspection checks as required. Perform all dock audits as required. Perform first piece approvals prior to production start-up. Issue Quality Problem Reports when non-conforming material is found. Review control charts from receiving in-house inspection, making sure all points are in control. Assist in making sure that new products meet customer requirements. Maintain all quality records in a neat and orderly fashion. Perform other duties as instructed by Quality Manager. Assist with paperwork associated with AQP. Any other duties deemed necessary by the Vice President of Operations Additional Responsibilities Assist Quality Management in performing process capability studies as required. Assist in developing cause and corrective action on customer, supplier or internal rejections. Member of MRB Member of AQP Qualifications High School Diploma or equivalent. Working knowledge of SPC, inspection and laboratory test equipment and blueprint reading. Knowledge of screen-printing. Self-starter, detail oriented and strong math background. Must have normal color vision Read 5 or 6 point font

Pay: $19-$25 per hour (based on experience) Available Shifts: 1st Shift: 6:00 AM - 3:30 PM 2nd Shift: 3:00 PM - 11:30 PM Weekend Shift: 6:00 AM - 6:00 PM (Friday, Saturday, Sunday) The Quality Technician is responsible for supporting quality control activities to ensure products meet company and customer standards. This role involves inspecting parts, documenting results, and working closely with production teams to identify and resolve quality issues. Key Responsibilities Perform inspections of incoming, in-process, and finished products Use measuring tools such as calipers, micrometers, gauges, and other inspection equipment Document inspection results and maintain quality records Identify and report nonconforming materials or quality issues Support root cause analysis and corrective actions Follow all safety, quality, and company procedures Work closely with production and engineering teams to maintain quality standards Qualifications High school diploma or GED required Previous quality, inspection, or manufacturing experience preferred Ability to read blueprints and specifications is a plus Basic math and measurement skills Strong attention to detail and documentation skills Ability to stand, walk, and perform repetitive tasks during shift Why Join Us Competitive hourly pay based on experience Multiple shift options available Stable work environment with growth opportunities