Quality engineer jobs in Hugo, MN

Cabinetworks Group has an immediate opening for a Technical Process Engineer in Waconia, MN! While all qualified applicants are welcome to apply, preference will be given to candidates who currently reside in or near the Waconia, MN area, JOB SUMMARY: Senior role with 8-10 years of experience responsible for overseeing and optimizing the Finishing & Coating process, ensuring high-quality finishes, and meeting customer specifications. Work closely with the production and quality control teams to ensure the successful execution of the painting and finishing processes from start to finish. Implements process improvements to meet quality standards, perform feasibility studies, maintain supplier relationships, and solves problems. PRINCIPAL FUNCTIONAL RESPONSIBILITIES: Develop, implement, and continuously improve the painting/coating processes for cabinets, ensuring efficiency, consistency, and quality across all production runs. Identify and lead projects, and project teams, to resolve manufacturing issues to meet business goals and objectives. Ensure that products meet the highest standards for finish quality, including color consistency, smoothness, durability, and resistance to wear. Inspect finished products for defects such as uneven coats, drips, or scratches. Quickly identify and address any issues in the painting process, such as paint adhesion problems, uneven application, or drying/curing issues. Provide solutions to reduce defects and maintain production schedules. Document all painting processes, materials, and quality control procedures. Maintain records of paint batch approvals, test results, and any changes to standard operating procedures (SOPs). Provide training to production staff on proper painting techniques, equipment usage, and safety procedures. Encourage continuous learning and knowledge sharing within the team. Develop, and/or support the specification and installation of capital equipment. Provide daily shop floor support in the areas of machine operation, set-up, troubleshooting, safety, process improvements and ergonomics. Actively promote and participate in the continuous improvement program, lean manufacturing, and Six Sigma process. Ability to travel up to 10% including international. ESSENTIAL QUALIFICATIONS AND SKILLS: Bachelor's degree in Industrial Engineering, Manufacturing Engineering, Chemical Engineering; or a related technical field or equivalent experience in a similar role. 8-10 years engineering experience in a technical role related to finishing and painting processes in a high volume, fast paced manufacturing environment. Expertise in surface preparation, application techniques, and curing methods for cabinet finishes. Strong knowledge of coating systems, including solvent-based, water-based, and powder coatings. Proficiency in process optimization and quality control methods. Familiarity with painting equipment and technology, including spray booths, HVLP (High Volume Low Pressure) sprayers, and automated painting systems. Intermediate proficiency with Microsoft Office Suite. Lean Manufacturing knowledge. Exposure to systems controls such as ISO 140001. WORK ENVIRONMENT This role operates in a plant environment. Physical requirements include: Ability to stand for long periods. Computer Use: Proficient use of a computer, including typing, mouse manipulation, and viewing a computer screen for extended periods is essential. Physical demands include required lifting, carrying, pushing, and pulling weight up to 20 lbs. Occasionally up to 50 lbs. Salary Range $80k

Job Title Advanced Quality Engineer Collaborate with Innovative 3Mers Around the World Choosing where to start and grow your career has a major impact on your professional and personal life, so it's equally important you know that the company that you choose to work at, and its leaders, will support and guide you. With a wide variety of people, global locations, technologies and products, 3M is a place where you can collaborate with other curious, creative 3Mers. This position provides an opportunity to transition from other private, public, government or military experience to a 3M career. The Impact You'll Make in this Role The person hired for the position of Advanced Quality Engineer will be responsible for ensuring consistent product quality aligned with customer needs throughout the designed product life. This specific role will support optical films, adhesives, materials, and novel combinations in Display and Electronics Product Platform through New Product Introduction (NPI) projects and providing support on Change Managed (CMP) projects through appropriate risk analysis (FMEA) and addressing key risks. As an Advanced Quality Engineer you will have the opportunity to tap into your curiosity and collaborate with some of the most innovative people around the world. Here, you will make an impact by: * Respond to customers as needed (product development and customer specifications, complaints and CAPA, key account management including customer agreements, data analysis, etc.) * Lead continual quality improvement projects to improve quality and reduce Defective Parts per Million (DPPM) * Lead quality tool usage within project teams * Manage customer complaints in 3M Customer Issue Resolution (CIR) system within product responsibility area * Develop test methods: documentation, training, Measurement System Analysis (MSA), round robins * Develop visual reference standards, visual test methods, and align visual detection systems * Product qualification planning, testing, and analysis * Lead the development of Quality Functional Deployment (QFD), Failure Mode and Effect Analysis (FMEA), Control Plans * Document and improve the Quality Management System Your Skills and Expertise To set you up for success in this role from day one, 3M requires (at a minimum) the following qualifications: * Bachelor's degree or higher in Science, Technology, Engineering or Mathematics discipline (completed and verified prior to start) * One (1) year of experience working or interning in a Quality Engineering, Product Engineering and/or Manufacturing environment in a private, public, government or military environment Additional qualifications that could help you succeed even further in this role include: * Experience working with automated inspection systems * Bachelor's degree or higher in Engineering, Physics, Chemistry, Mathematics/Statistics or related discipline from an accredited institution * Minimum 3-years of Quality Engineering and/or Product Engineering * Experience in Manufacturing * Experience leading cross-functional teams and/or projects * Lean Six Sigma training with proven ability to understand and apply Lean Six Sigma and other quality tools to product, systems and process problems * Working knowledge of International Organization for Standardization (ISO) 9001 standards * Test method development experience Work location: * Work location: This role follows an on-site working model, requiring the employee to work at least four days a week at the 3M Center in Maplewood, MN. * Travel: May include up to 25% domestic/international * Relocation: May be authorized Must be legally authorized to work in country of employment without sponsorship for employment visa status (e.g., H1B status). Supporting Your Well-being 3M offers many programs to help you live your best life - both physically and financially. To ensure competitive pay and benefits, 3M regularly benchmarks with other companies that are comparable in size and scope. Chat with Max For assistance with searching through our current job openings or for more information about all things 3M, visit Max, our virtual recruiting assistant on 3M.com/careers. Applicable to US Applicants Only:The expected compensation range for this position is $98,413 - $120,282, which includes base pay plus variable incentive pay, if eligible. This range represents a good faith estimate for this position. The specific compensation offered to a candidate may vary based on factors including, but not limited to, the candidate's relevant knowledge, training, skills, work location, and/or experience. In addition, this position may be eligible for a range of benefits (e.g., Medical, Dental & Vision, Health Savings Accounts, Health Care & Dependent Care Flexible Spending Accounts, Disability Benefits, Life Insurance, Voluntary Benefits, Paid Absences and Retirement Benefits, etc.). Additional information is available at: *************************************************************** Good Faith Posting Date Range 10/01/2025 To 10/31/2025 Or until filled All US-based 3M full time employees will need to sign an employee agreement as a condition of employment with 3M. This agreement lays out key terms on using 3M Confidential Information and Trade Secrets. It also has provisions discussing conflicts of interest and how inventions are assigned. Employees that are Job Grade 7 or equivalent and above may also have obligations to not compete against 3M or solicit its employees or customers, both during their employment, and for a period after they leave 3M. Learn more about 3M's creative solutions to the world's problems at ********** or on Instagram, Facebook, and LinkedIn @3M. Responsibilities of this position include that corporate policies, procedures and security standards are complied with while performing assigned duties. Safety is a core value at 3M. All employees are expected to contribute to a strong Environmental Health and Safety (EHS) culture by following safety policies, identifying hazards, and engaging in continuous improvement. Pay & Benefits Overview: https://**********/3M/en_US/careers-us/working-at-3m/benefits/ 3M does not discriminate in hiring or employment on the basis of race, color, sex, national origin, religion, age, disability, veteran status, or any other characteristic protected by applicable law. Please note: your application may not be considered if you do not provide your education and work history, either by: 1) uploading a resume, or 2) entering the information into the application fields directly. 3M Global Terms of Use and Privacy Statement Carefully read these Terms of Use before using this website. Your access to and use of this website and application for a job at 3M are conditioned on your acceptance and compliance with these terms. Please access the linked document by clicking here, select the country where you are applying for employment, and review. Before submitting your application, you will be asked to confirm your agreement with the terms.

- Assisting in first article, FMEA, PFMEA, and out of box audits to ensure product meets design specifications and identify areas of weakness. - Assisting in qualifying raw materials and component parts, ensuring they meet the company's quality standards via PPAP and on-going quality monitoring. - Assisting with in-process controls and component issue resolution. - Assist in the creation of quality processes and documentation to ensure products and processes from suppliers meet technical standards. - Inspects select incoming materials for compliance to specifications (Drawings, BOM's, Routing Guide, Workmanship Standard, safety, etc.) - Collect data, generate inspection reports, discrepant material reports, and movements of products. - Performs source inspections-audits to validate product conformance, internal manufacturing/assembly processes, and supplier process controls. - Maintains accurate quality records of inspection and audit activities. - Support routine maintenance and calibration of quality equipment. Skills quality, Inspection, Quality control, Calipers, Blueprint, Quality inspection, Micrometre, Micrometer, Gages, first article inspection Top Skills Details quality Additional Skills & Qualifications - Experience with quality & inspection equipment - Proficient in interpreting 3D CAD drawings and Bill of Material structures. - Experience using Microsoft Office - Prior experience with ERP systems Experience Level Entry Level Job Type & Location This is a Contract position based out of Saint Paul, MN. Pay and Benefits The pay range for this position is $25.00 - $32.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Saint Paul,MN. Application Deadline This position is anticipated to close on Dec 19, 2025. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com (%20actalentaccommodation@actalentservices.com) for other accommodation options.

By joining Bio-Techne, you'll join a company with a powerful and positive purpose of enabling cutting-edge research in Life Sciences and Clinical Diagnostics. Bio-Techne, and all of its brands, provides tools for researchers to further treat and prevent disease worldwide. Pay Range: $24.40 - $33.55 POSITION SUMMARY The responsibilities of an Advanced Quality Technician are to perform tasks in the process of inspecting and testing science products. Duties may require interpreting results, inventory, and participation in complaint investigations. This position will participate in the continuous improvement of our products and customer-centered culture. ESSENTIAL FUNCTIONS Conduct inspections of raw materials and finished goods to ensure specifications and quality standards are met with minimal instruction and supervision. Conduct inspection of product literature and labels to ensure accuracy. Attention to detail. Ability to reconcile documents. Compile, analyze and report on data of moderate complexity. Consistently advocate for Quality Ideals by demonstrating commitment to meeting quality requirements in daily work Make decisions based on data or results of work. Draft and revise standard operating procedures (SOP's). Propose and Implement process improvements. Utilize relevant internal databases and job-applicable software programs effectively. Demonstrate a high level of problem-solving ability with the capacity to suggest future changes. Participate in training less experienced employees. Fill in for all Quality Technician duties as needed. Follow guidelines and comply with all company safety, quality, and training procedures and regulations. Perform additional duties as assigned. JOB SPECIFICATIONS Education and Experience: This position requires a high school diploma or equivalent with 2+ years related experience or an associate degree with 0+ years of experience. Must have proficient computer and data entry skills, organizational skills, and excellent proofreading skills. Must be detail oriented. A working knowledge of Microsoft Word and Excel is required. Must be able to work in a fast-paced environment, multitask, and have good communication skills, both verbally and in writing. Knowledge, Skills, and Abilities Knowledge of Quality Assurance principles. Knowledge of ISO13485, ISO9001, and MDSAP Compliance. Knowledge of safety and company procedures and practices. Skills in coordination with Manufacturing departments. Skills in problem solving; including the ability to identify and appropriately evaluate a course of action. Skills in critical thinking. Ability to be flexible. Ability to act independently and with teams on projects. Ability to plan, organize and multi-task to complete assignments in an efficient manner. Ability to communicate professionally, both oral and written. Ability to pay attention to details and perform at a high-level of accuracy. Ability to work independently and with a team. Ability to work hours that conform to standard business operations (8:00 A.M. to 5:00 P.M.) Why Join Bio-Techne: We offer competitive insurance benefits starting on day one: medical, dental, vision, life, short-term disability, long-term disability, pet, and legal and ID shield. We invest in our employees' financial futures through 401k plans, an employee stock purchase plan (ESPP), Health Saving Account (HSA), Flexible Spending Account (FSA), and Dependent Care FSA. We empower our employees develop their careers through mentorship, promotional opportunities, training and development, tuition reimbursement, internship programs, and more. We offer employee resource groups, volunteer paid time off, employee events, and charity drives to build a culture of caring and belonging. We offer an accrued leave policy with paid holidays, paid time off, and paid parental leave. We foster a culture of empowerment and innovation, where employees feel valued and encouraged to bring their new ideas to the table. Bio-Techne is an E-Verify Employer in the United States. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. To protect the interests of all, Bio-Techne will not accept unsolicited resumes from any source other than a candidate application. Any unsolicited resumes sent to Bio-Techne will be considered Bio-Techne property.

We're looking for people who put their innovation to work to advance our success - and their own. Join an organization that ensures a more secure world through connecting and protecting our customers with inventive electrical solutions. We're looking for people who put their innovation work to advance our success - and their own. Join an organization that ensures a more secure world through connecting and protecting our customers with inventive electrical solutions. What you will experience in this position: Provide quality assurance support and lead root cause problem solving activities that are aligned to improve internal and external quality levels, supporting overall customer satisfaction of our products. Lead problem solving activities for both product and manufacturing processes, with assistance from Quality Engineer Perform process validations, in-process inspections, and monitoring, analyzing the quality of manufacturing processes and products Provide support to design, manufacturing, and quality engineering functions for data collection, analysis, product review, and process capabilities Understand, adhere to, and develop processes compliant with the Quality Management Systems (QMS) objectives, as well as train other personnel to adhere to QMS standards Perform internal ISO standard audits and provide audit support in designated areas Provide formal documented FAI reports suitable for customer or internal use as required Determine and use appropriate measuring tools and equipment to verify dimensional and functional requirements Effectively communicate with appropriate areas as needed, (Operations, Supply, Manufacturing Engineering, Design, Quality, Customer Service, Production Planning, Logistics, etc.) Lead and/or assist in supporting the activities that maintain the calibration status of inspection, test, and measurement equipment Perform other related duties as assigned You have: High school diploma or GED Ability to read schematics, blueprints and process related documents. GD&T knowledge is a plus. Knowledge of how Air Conditioning equipment operates and functions is a plus 2+ years working in the quality/manufacturing field Ability to use measurement tools and techniques Experience with Quality Management Systems (QMS) preferred Skills: Strong written, verbal, and interpersonal communication skills Attention to detail and ability to prioritize tasks is key to being successful in this role Must be able to interpret order requirements, quotes, drawings, and draw conclusions Ability to use precision measuring equipment (e.g., calipers, micrometer, paint mill gauges, etc.) Skilled in identifying root causes of routine problems/issues and the ability to develop recommendations for resolution Ability to interpret and apply Quality Systems / ISO procedures and documentation Comfortable using computer systems and software including MS Office Applications and ERP System (JD Edwards is a plus) Abilities to meet the physical and environmental demands: Lift up to 50lbs Stand and walk frequently Operate hand tools Work primarily indoors where there is frequently noise of 85 dB and occasional exposure to chemical hazards (solvents) We have: A dynamic global reach with diverse operations around the world that will stretch your abilities, provide plentiful career opportunities, and allow you to make an impact every day We are a $2.4 billion, high-performance electrical company with a dedicated team of 10,000 people, across more than 80 global locations We have a robust portfolio of product brands dating back more than 100 years and including: nVent CADDY, ERICO, HOFFMAN, RAYCHEM, SCHROFF and TRACER Commitment to strengthen communities where our employees live and work We encourage and support the philanthropic activities of our employees worldwide Through our nVent in Action matching program, we provide funds to nonprofit and educational organizations where our employees volunteer or donate money Core values that shape our culture and drive us to deliver the best for our employees and our customers. We're known for being: Innovative & adaptable Dedicated to absolute integrity Focused on the customer first Respectful and team oriented Optimistic and energizing Accountable for performance Benefits to support the lives of our employees WE HAVE: A dynamic global reach with diverse operations around the world that will stretch your abilities, provide plentiful career opportunities, and allow you to make an impact every day nVent is a leading global provider of electrical connection and protection solutions. We believe our inventive electrical solutions enable safer systems and ensure a more secure world. We design, manufacture, market, install and service high performance products and solutions that connect and protect some of the world's most sensitive equipment, buildings and critical processes. We offer a comprehensive range of systems protection and electrical connections solutions across industry-leading brands that are recognized globally for quality, reliability and innovation. Our principal office is in London and our management office in the United States is in Minneapolis. Our robust portfolio of leading electrical product brands dates back more than 100 years and includes nVent CADDY, ERICO, HOFFMAN, ILSCO, SCHROFF and TRACHTE. Learn more at ************** Commitment to strengthen communities where our employees live and work We encourage and support the philanthropic activities of our employees worldwide Through our nVent in Action matching program, we provide funds to nonprofit and educational organizations where our employees volunteer or donate money Core values that shape our culture and drive us to deliver the best for our employees and our customers. We're known for being: Innovative & adaptable Dedicated to absolute integrity Focused on the customer first Respectful and team oriented Optimistic and energizing Accountable for performance Benefits to support the lives of our employees Pay Transparency nVent's pay scale is based on the expected range of base pay for this job and the employee's work location. Employee pay within this range will be based on a combination of factors including knowledge, skills, abilities, experience, education, and performance. Where federal, state, or local minimum wage requirements exist, employee pay will comply. Compensation Range: $20.40 - $37.80 Per Hour Depending on the position offered, employee may be eligible for other forms of compensation, such as annual incentives. Benefit Overview At nVent, we value our people and their health and well-being. We provide a broad benefits package with meaningful programs for eligible full-time employees that includes: Medical, dental, and vision plans along with flexible spending accounts, short-term and long-term disability benefits, critical illness, accident insurance and life insurance. A 401(k) retirement plan and an employee stock purchase plan - both include a company match. Other supplemental benefits such as tuition reimbursement, caregiver, personal and parental leave, back-up care services, paid time off including volunteer time, a well-being program, and legal & identity theft protection. At nVent, we connect and protect our customers with inventive electrical solutions. People are our most valuable asset. Inclusion and diversity means that we celebrate and encourage each other's authenticity because we understand that uniqueness sparks growth.

Phillips Distilling Company is currently inviting candidates to apply for a full-time 2nd shift Quality Technician opportunity. The candidate selected for this role will enjoy a 4-day work week, competitive compensation, annual bonus potential, development opportunities, and a comprehensive benefits package including generous paid time off and paid holidays! Join the Phillips' team today and enjoy being in good spirits every day! Since 1912, Phillips Distilling Company (PDC) has produced high-quality spirits and popular brands. As one of America's oldest family-owned spirits companies, we pride ourselves on our independent spirit and our commitment to safety, quality, innovation and community. Classification: Non-Exempt Department: 8910 Quality Assurance Reports To: Quality Supervisor Work Schedule: Monday - Thursday, 3:00pm to 1:00am Starting Pay Range: $22.00 - $25.50/Hour $2.00 per hour shift differential for 2nd shift Where a candidate falls within the pay range will vary based on a variety of factors, including, but not limited to, geographic location, education, skills and experience. Summary: The Quality Technician ensures product quality and compliance with regulatory standards. This role is responsible for reviewing production records, verifying raw material acceptability, conducting proofing processes, and addressing quality or process-related issues on the production floor. Essential Functions: Monitor and promote compliance with Good Manufacturing Practices (GMP) and regulatory requirements. Participate in Quality System verifications, HACCP program maintenance as well as facility inspections and audits. Perform customer required inspections and audits of finished products. Perform detailed record reviews. Analyze and correct products for proof, pH, clarity and color in compliance with TTB regulations and customer requirements while prioritizing tasks based on the production schedule. Respond promptly to production floor calls for quality-related support and troubleshooting. Assist in investigating and addressing non-conforming products and raw materials by gathering relevant data and generating alerts. Support complaint investigations and contribute to solutions for quality concerns. Maintain accurate, up-to-date records, including TTB documentation, batch tickets, and lab reports. Analyze tanker samples promptly, maintaining a one-hour turnaround. Calibrate and clean laboratory equipment regularly to ensure testing accuracy. Monitor lab supplies and coordinate restocking to avoid disruptions in operations. Test wastewater and stormwater pH and proof, ensuring compliance with environmental standards. Provide support for tasting setups and other quality assurance processes. Contribute to waste management compliance and water quality monitoring. Performs all other related duties as assigned. Additional Functions: Living and abiding by the Phillips Way and the company's core values: Communication & Collaboration, Dignity & Respect, Accountability, Customer Service and Community. Required Competencies: Must have the ability to work and participate in an environment that expects all employees to support wellness, safety, quality, and environmental responsibility. Knowledge of mathematical relationships and deductive reasoning for troubleshooting and solving work-related problems. In-depth understanding of production processes and investigative skills. Adaptability to transition between tasks and manage multiple priorities under time constraints with a forward-thinking mindset. Self-starter capable of working with minimal supervision while maintaining effective communication and teamwork. Proficiency in reading, writing, and communicating effectively in English to support documentation and team collaboration. Must have computer/technology knowledge and skills necessary to perform job responsibilities. Knowledge of quality principles and industry standards. Required Education & Experience: Ability to maintain current knowledge, skills and/or certifications relevant to assigned job responsibilities. 2+ years of related work experience. Equivalent combination of education and experience. Preferred Education & Experience: Previous experience working in food or beverage industry. An associate degree in a physical science field of study preferred (Chemistry, Microbiology, Biology, etc.) Supervisory Responsibilities: None Work Location & Travel Required: This position works on-site reporting to the Princeton location. Work Environment & Physical Demands: Regularly lifts and carries up to 50 pounds, including navigating stairs and congested areas with stability and coordination. Frequently stoops, bends, and maneuvers in tight or obstacle-filled spaces; occasionally climbs ladders. Alternates between prolonged sitting at a desk and standing or walking on hard surfaces for extended periods. Frequent exposure to noise; proper personal protective equipment is required when working in operational areas. Other Considerations: The intent of this job description is not to state or imply that the duties listed are the only duties that will be performed. Employees will be required to follow any other job-related instructions and perform any other job-related duties as requested by management. Duties, responsibilities, and activities may change, or new ones may be assigned at any time with or without notice. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions of this job. Phillips Distilling Company is an equal opportunity employer committed to creating an inclusive and diverse workforce. We consider all qualified individuals for employment without regard to race, religion, color, sex, national origin, age, sexual orientation, gender identity, disability, or veteran status, among other factors. Benefits Overview: PDC offers a comprehensive benefits package to support the health, well-being, and financial security of our employees and their families. Our benefits package includes: Health Benefits: Medical, dental, and vision plans to meet individual/family needs. Financial Well-being: 401(k) retirement savings plan with company match, flexible spending accounts (FSAs), and health savings accounts (HSAs). Income Protection: Employer-paid life insurance, accidental death & dismemberment (AD&D) insurance, short-term disability, and long-term disability coverage. Paid Time Off: Includes 9 paid holidays, annual PTO accrual, bereavement leave, and parental leave Additional Voluntary Benefits: Options for supplemental life insurance, critical illness, and accident insurance. Wellness Program: Incentives and resources to support physical and mental well-being. Employee Assistance Program (EAP): Confidential access to counseling, financial & legal planning, estate planning, wellness resources, and more to support employees and their families. Bonus Potential: Annual bonus opportunities based on individual and/or company performance. This summary provides a general overview of available benefits. Specific details, including eligibility criteria and plan options, will be provided during the recruitment/onboarding process. Candidates offered employment will be required to submit to a background check, drug test and physical ability exam. Phillips Distilling Company is an E-Verify participating employer.

Permanent About Heraeus Making displays foldable? Helping hearts beat with medical innovations? Or breathing new life into precious metals? As a family-owned global technology group we help our customers to always being one step ahead. About Heraeus Medevio Together we improve lives. At Heraeus Medevio, we bring lifesaving and life-changing medical devices to market through partnerships with medical device manufacturing companies. Backed by Heraeus Group, we are committed to the growth of our teams and organization by providing an open space for open minds. To reach our vision of improving 100 million lives every year, we foster a culture of curiosity that thrives on challenge, continuous learning, growth, and the opportunity to try new things. With sites in the United States, European Union, and Asia, and over 2,200 employees worldwide, together, we will meet tomorrow's challenges today. Position Summary The primary responsibility of the Quality Technician II will be to support Quality Systems including calibration and document control to assure that equipment and documents are maintained in compliance with Heraeus procedures and applicable regulations and standards. What You'll Do Every Day: * Maintains calibrated equipment in calibration system with accuracy and completeness. * Tracks calibration status of equipment and notifies departments/owners when equipment is due for calibration. * Reviews calibration records to ensure compliance to ISO standard and calibration procedure requirements. * Identifies, reports and documents all discrepancies, and potential problems. Participates in root cause analysis. Assists QE in nonconforming out of tolerance report transactions, management and tracking of nonconformances to completion. * Performs complex visual and dimensional inspection of various calibrated tools and equipment to ensure compliance with drawings and specifications. * Assures document control and record keeping activities are carried out and completed in compliance with established procedures and work instructions. * Processes document change requests within the document control system through document approvals and release. Compile calibration and document control data for internal review and trending. * Occasional travel for cross site support between White Bear Lake and Fridley, Minnesota. * Other duties may be assigned as required. What We're Looking For: * High school diploma required; trade school, associate/technical degree or CQT/CMI certification a plus. * Minimum 3 years of relevant experience in inspection or quality systems. * Proficient with use of precision tools such as calipers, gauges, microscopes, comparator, laser micrometer and video inspection equipment. * Proficient in Geometric Dimensioning and Tolerancing and Statistical techniques. * Proficient using Microsoft Office and calculators. * Experience with ISO 17025, ISO 10012, ISO 13485 and NIST standards a plus. * Fluent in English, both written and verbal. * Train the Trainer experience a plus. Medevio is committed to providing competitive total compensation and benefits packages. The expected hiring range for this position is between $24.00/hr and $31.25/hr based upon a full-time schedule. This is a good faith estimate on the applicable range. Base salaries are determined by taking a variety of factors in account, including, but not limited to, candidate qualifications, geographic locations, market conditions and internal equity. This position is bonus eligible. Our total compensation package includes eligibility for comprehensive medical, dental, and vision coverage, a 401(k) plan with company match, education reimbursement, paid parental leave and paid time off. Curious? Apply now! Heraeus is proud to be an employer that provides equal access to opportunities for all its employees. We provide fair and equal consideration to all qualified applicants, regardless of sex, gender identity, sexual orientation, race, color, religion, national origin, physical or mental disability, protected veteran status, age, or any other legally protected characteristic. A diverse and inclusive culture is at the heart of our Vision, Mission, and Values. We are dedicated to cultivating a workforce that reflects a broad spectrum of cultures, backgrounds, and perspectives. We participate in E-Verify to confirm employment eligibility after hire. Learn more at **************** Any further questions? If you need any assistance or have questions, please contact ***************************** or visit our website at jobs.heraeus.com. ReqID: 58699

Minco is a global provider of thermal solutions, temperature sensing and control solutions, and flex circuit solutions for medical, aerospace, defense, oil and gas, power generation, and other high-reliability applications. Our experienced team couples advanced product technologies, expert design and engineering services, and a deep understanding of our customers' applications to provide comprehensive solutions that meet exacting requirements for quality, reliability, and performance. Job Summary As a Quality Technician in First Article Inspection, you will help Minco succeed by working with CMM machines, partnering with Process and Design Engineers, and embodying Minco's icare values: Integrity, Communication, Accountability, Respect, & Energy. Responsibilities Key Responsibilities: * Read and interpret customer PO, clauses, drawings, and specifications to identify appropriate inspection and verification methods * Interpret Geometric Dimensioning and Tolerancing specifications * Program a Micro-Vu CMM for all inspections as required * Perform first article inspections on new and existing products by AS9102B * Proficient in the use of measurement tools (calipers, micrometers, microscopes, etc.) * Communicate quality issues and concerns with production and engineering staff * Perform in-process inspections * Participate in problem-solving teams to support Corrective Action/Preventive Action (CAPA) activities * Collect, analyze, and report on inspection data and maintain data files * Participate in continuous improvement activities (i.e., waste reduction activities, reducing lead-time, and maintaining 5S standards) * Assist with calibration and receiving inspection as needed * Performs other duties as identified. Qualifications Skills: * Good verbal and written communication skills * Ability to work well with other departments or groups * Demonstrated ability to communicate well with co-workers * Strong problem-solving skills * Performance Driven Qualifications: * Two or more years of experience as a Quality Technician in a manufacturing environment * Two or more years of experience operating CMM * Associate's Degree in a technical field or equivalent education and experience Preferred Qualifications (Not Required): * Two or more years of experience with Geometric Dimensioning and Tolerancing (ASME Y14.5-2009), or the ability/interest to learn * CMM Programming experience, or the ability/interest to learn * Excellent computer skills, including typing and the use of Microsoft Office applications (Outlook, Word, and Excel) * Experience as a first article inspector * Experience using a Micro Vu CMM machine, or the ability/interest to learn * Knowledge of Discuss and InSpec software, or the ability/interest to learn * Experience navigating within an ERP system (IFS) * Understanding of technical engineering processes and equipment * Understanding of mathematical calculations involving basic statistics and operational data * Experience with basic measurement equipment for part and product inspection * Familiar with ANSI Z1.4-2003, ANSI Z1.9-2003, or the ability/interest to learn * Familiar with ISO9001:2008 and AS9100C standards, or the ability/interest to learn * Able to collect, analyze and report data * Demonstrated continuous improvement skills (Lean, 6σ), or the ability/interest to learn Why Minco? At Minco, we offer benefits and services that help balance work life and personal life, a competitive wage and benefits package, opportunities for continuous improvement and personal growth, and company celebrations - some of the many reasons that make Minco a great place to work! Find out why you would love working at Minco by learning more about our company culture and the rewards of working with us at ********************* - then apply! Current Minco Employees: Please apply via your employee page. If you need assistance, please contact ************************ Reports To: Quality Inspection Manager Location: Fridley, Minnesota Benefits: Healthcare benefits are eligible on the first of the month following the hire date, 401K with an employer match after 61 days of full-time employment, Short Term Disability Insurance, Long Term Disability Insurance, HAS, and FSA available, Tuition Reimbursement, Employee Managed Time-Off We are proud to be an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, national origin, veteran, marital, or disability status. We maintain a drug-free workplace and perform pre-employment substance abuse testing and background checks. Minco Products, Inc. is an E-Verify employer. This position requires the use of information or access to hardware and software that is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons, as defined by ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee)

Job DescriptionDescription: About us Chandler Industries is a premier contract manufacturer specializing in precision machining, EDM, sheet metal fabrication, and a range of value-added services. We excel in providing exceptional value through responsive customer service, technical expertise, and innovative lean manufacturing practices. Our commitment to delivering world-class quality and on-time performance has made us a trusted partner for our customers. Chandler operates five divisions, including four in Minnesota-Blaine, Long Prairie, Montevideo, and Wyoming-and one in Chihuahua, Mexico. The Quality Technician II performs quality inspection on parts, components and products that are received, in-process, and finished per customer, company, and regulatory requirements. Assists with the design, development and implementation of inspection methods, plans, and testing equipment. Will run CMM's in production environment. Job Duties and Responsibilities Using work instructions, job traveler, blueprints, engineer drawings and specifications; inspects, checks, and tests materials, parts, components, and product during various stages of production including leave, in-process, and finished. Read and interpret engineering drawings and specifications; handle complex GD&T with limited guidance. Select appropriate inspection tools and perform accurate, repeatable measurements. Conduct dimensional, bore, plate-based, and functional inspections independently. Perform part alignments, surface evaluations, hardness checks, and visual inspections. Execute inspection CMM programs and perform basic troubleshooting as needed. Verify equipment calibration status prior to use. Complete inspection documentation accurately, including DHRs, travelers, and inspection records. Write basic Nonconformance Reports (NCRs) independently. Communicate inspection results clearly with operators, supervisors, and quality personnel. Manage assigned workload independently while maintaining quality and accuracy. Collaborate effectively with team members and support overall quality objectives. Adapt to changing priorities with some guidance while maintaining performance. Take ownership of work and promptly identify and escalate quality issues. Other duties as assigned. Requirements: Required Skills and Experience High School Diploma or equivalent. Working knowledge of metrology including measurement machines (CMM). Must be able to pass annual visual exam (20-25, corrected, uncorrected, one eye). Proficient reading, writing, oral communication, and comprehension in English language. Proven ability to work independently in a manufacturing or quality environment. Strong attention to detail and commitment to accuracy. Effective communication and teamwork skills. Ability to learn new processes and apply feedback consistently. This position requires use of information or access to hardware which is subject to the International Traffic in Arms Regulations (ITAR). All employees must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident, Political Asylee, or Refugee. Additional Skills and Experience (Preferred or helpful) Experience working in the Aerospace, Medical or other highly regulated industry. Knowledge and use of metrology programming software. ISO 9001:AS9100 and ISO 13485 experience. Certified Quality Inspector. Certified Weld Inspector. Compensation Compensation is determined based on a variety of factors related to the specific position. These may include skills, relevant experience, education, internal equity, business needs, and local market conditions. While the full range is shared for transparency, offers are rarely made at the minimum or maximum of the range. Chandler offers a comprehensive benefits package to eligible employees and their dependents. This includes medical, dental, and vision coverage; life insurance; short- and long-term disability; a 401(k) plan with company match; and a range of supplemental benefit options. In addition, eligible employees receive paid holidays and paid time off.

Up North Plastics is currently seeking Quality Control Technicians to join our quality team on our Night Shift. Up North Plastics produces several lines of plastic products including high quality trash bags, construction films, and agricultural tubes. Pay Rate: $19.50 Qualifications Strong computer skills Strong attention to detail Previous manufacturing experience a plus Previous quality experience a plus Responsibilities Quality Control Technicians at Up North Plastics are responsible for conducting quality audits on finished product to ensure that they meet required specifications. This role is also responsible for analyzing data and forming solutions to any issues that may arise from completed audits. The role may involve additional responsibilities and opportunities as they become necessary and/or are assigned by management. Up North Plastics provides indepth on the job training with a lot of opportunity for growth. Also, Up North Plastics allows a great deal of overtime and paid breaks. Up North Plastics offers competitive compensation packages including Medical/Dental, paid vacations and holidays, ESST, and 401(K).

We are the largest electrical distribution cooperative in Minnesota and is a progressive organization that provides electric service to customers in a 7-county area north of the Twin Cities. Our organization received the highest ranking in reliability and the ability to restore power of all electric utilities nationwide in the 2014 American Customer Satisfaction Index. We are currently seeking an experienced Engineer with excellent analytical skills to guide the Engineering department in developing and applying standards that result in the most cost effective, reliable distribution system. The individual in this position will develop and maintain construction standards and specifications for the distribution system that includes new technologies, materials, methods and products. Key areas of responsibilities include: • Create standards and identify new materials to design, construct, and maintain a quality system while continuously analyzing and striving to make improvements • Develop and maintain construction specifications • Research and prepare major material purchase specifications for equipment • Research and evaluate new products • Review equipment and material failures and implement necessary corrective measures • Provide technical guidance to distribution system design and construction departments • Develop, publish, and distribute construction specification books to ensure all system construction will meet strength and clearance requirements and to minimize construction costs, while meeting standards and codes Required Talents, Skills, Expertise, Education • BS degree in Electrical, Civil, Mechanical or Industrial Engineering • Five years' experience in electric distribution, transmission or substation engineering in a utility focused environment • Engineer-in-training with ability to obtain Professional Engineer license in Minnesota • Knowledge and ability to apply standards and codes • Excellent oral and written communication skills Preferred Talents, Skills, Expertise, Education • Knowledge and ability to apply National Electrical Safety Code • Power emphasis in Electrical Engineering • Professional Engineer license in Minnesota • Drafting software skills SKILLS AND CERTIFICATIONS Engineer-in-training with ability to obtain Professional Engineer license in Minnesota Excellent oral and written communication skills SCREENING QUESTIONS Please seriously evaluate where Ramsey, MN is located and the climate in this area. Based on your evaluation and if necessary, would you be willing to relocate to MN? Do you have a BS degree in Electrical, Civil, Mechanical or Industrial Engineering? Do you have five or more years experience in electric distribution, transmission or substation engineering in a utility focused environment? IDEAL CANDIDATE The ideal candidate has 5+ years' experience in electric distribution system applications. A Power emphasis in Electrical Engineering, Professional Engineer license in Minnesota, familiarity with National Electric Code and drafting software skills would be ideal. IDEAL CANDIDATE SHOULD HAVE WORKED FOR THE FOLLOWING COMPANY(IES): Xcel Energy, other electric co-operatives or municipalities, engineering consulting firms that specialize in power Additional Information All your information will be kept confidential according to EEO guidelines. Direct Staffing Inc

Founded in 1990 and based in New Richmond, WI, Isometric's vision was to manufacture tooling and provide manufacturing solutions to exacting specifications for ultra-small, ultra-precise, and ultra-complex applications. For the past 35 years, we're proud to say we've grown to be one of the largest medical-focused micro molders in the United States. In March 2024, Isometric was acquired by Nissha Medical Technologies (NMT), a global Contract Design/Development Manufacturing Organization. NMT's expertise in the design and development of endoscopic devices, combined with Isometric's market leading micro-molding capabilities, are revolutionizing drug delivery and medical devices including minimally invasive surgical instruments and surgical robotics. Together, we aim to meet the evolving needs of medical devices, enhance component miniaturization, and improve the maneuverability of small and precision components, ultimately contributing to improved device functionality. It's an exciting time to join our team, and we're hiring for a Quality Technician on 2nd shift. This position supports the Quality Department by ensuring compliance with customer and regulatory requirements through effective inspection, testing, and documentation practices. The Quality Technician plays a key role in maintaining and improving our Quality Management System (QMS), with a strong focus on ISO13485 standards and continuous improvement. This is a full-time, non-exempt paid position, and the hours for this position are Monday-Thursday, 3:00PM-1:30AM. Essential Functions and Responsibilities: Operate a variety of inspection equipment (CT scanner, vision system, CMM, calipers, micrometer, gauges, etc.). Walk the production floor and collect part samples for the Quality Lab. Walk the production floor and perform visual inspection of parts to provide real time feedback to manufacturing. Review records and ensure GDP compliance. Perform and record inspections to support production activities. Perform and record inspections to support development activities (GR&R studies, FAIs, correlation analysis and capability analysis). Perform and record inspections of incoming raw materials. Review inspection results for completeness and appropriateness and escalate if issues arise. Communicate inspection results with internal team members. Work with production and development to inspect product in a timely manner. Perform Shipping Review Checklist. Execute clearnroom particulate testing as directed. Assist in the improvement and maintenance of the Quality Management System. Draft new departmental procedures and revise existing ones as needed. Supports Isometric ISO 13485 continuous improvement initiatives. Other duties as assigned. Education and/or Experience: Associate's degree in a related technical field or 2+ years of relevant quality inspection experience. Understanding of blueprint reading and GD&T concepts. Knowledge of inspection methods and equipment. Experience in medical molding and validation preferred. Strong attention to detail and quality orientation. Ability to work independently and follow procedures in a regulated environment. Isometric offers a comprehensive benefit package along with competitive pay: 401(k) program with Company match available after 90 days 3 weeks of paid time off, 2 personal days, and 11 paid holidays (10 observed holidays + 1 floating holiday of your choice) Medical, Dental, and Vision options available the 1st of the month followed by your hire date. Health Savings Account options available including a quarterly company contribution Company paid coverages include Employee Life/AD&D & Short-Term Disability Voluntary benefit options include Long-Term Disability, Supplemental Life/AD&D for Employees, Spouse, and Children, Group Accident Insurance, Home Warranty coverage, Legal support coverage, and Pet insurance! Hands on training Isometric, a NMT Company, is an Equal Opportunity employer. We are committed to creating a diverse workforce; we support a work environment where colleagues are respected and given the opportunity to perform to their fullest potential. We consider all qualified applicants without regard to race, religion, color, sex, national origin, age, sexual orientation, gender identity, disability or veteran status, among other factors.

Job Details Minneapolis, MN $20.12 - $33.53 HourlyDescription A global company with a tight knit, encouraging atmosphere, Wanner Engineering offers an outstanding opportunity for professional learning, personal growth, and career advancement. At its start-up over 50 years ago, Wanner Engineering broke boundaries for technological innovation and continues to progress because of our commitment to an entrepreneurial spirit. Position Summary: We are seeking an experienced Quality Technician to join our team. In this position you will work cross functionally with Quality, Engineering, and Manufacturing to support our quality management system to support our team who build pumps that are used worldwide which people depend on for water, sanitation, food, oil, and so much more! This is an associate level position with on-the-job training provided and it is the first step within your career at Wanner Engineering! What you'll do: Rejected Material Management Evaluate and manage the disposition of rejected materials to ensure compliance with quality standards. Collaborate with cross-functional teams to identify root causes of rejection and implement corrective actions. Maintain accurate records of rejected materials and associated actions taken. Material Review Board (MRB) Facilitate MRB meetings to review and analyze non-conforming products or materials. Work closely with production and engineering teams to determine appropriate dispositions for non-conforming items. Document MRB decisions and ensure timely implementation of corrective actions. Calibration System Management Perform and oversee equipment and tool calibration activities to maintain accuracy and reliability. Develop and maintain a calibration schedule for all relevant tools and equipment. Ensure compliance with calibration standards and documentation requirements. Quality Inspection Conduct product inspections to verify compliance with specifications and quality standards. Collaborate with production teams to address and rectify any identified quality issues. Utilize inspection tools and equipment to ensure precision and accuracy. First Article Inspection Reports (FAIR) Coordinate and conduct First Article Inspections to validate manufacturing processes. Review supplier FAI reports to ensure conformance to requirements. Work with engineering teams to address any discrepancies identified during FAI. Production Part Approval Process (PPAP) Facilitate the preparation and submission of PPAP documentation. Collaborate with suppliers and internal teams to ensure timely and accurate PPAP submissions. Maintain records of PPAP documentation and approvals. Qualifications What you bring: Minimum of 3 years' experience in quality control or related field. Proven work experience as a Quality Technician or in a similar quality related role. Proficiency in using various inspection tools and techniques. Ability to read and understand engineering drawings, including GD&T symbols and annotations. Strong analytical and problem-solving skills to identify root causes of quality issues. Excellent verbal and written communication skills to convey quality-related information effectively. Exceptional attention to detail in conducting inspections and maintaining accurate records. Knowledge of calibration processes and the ability to perform equipment calibrations. Experience in managing Material Review Board (MRB) processes for non-conforming materials. Familiarity with conducting and documenting First Article Inspections (FAI). Experience in preparing and submitting Production Part Approval Process (PPAP) documentation. In-depth knowledge of quality management systems and standards. Understanding of statistical methods for process control and improvement. Experience using root cause analysis tools to identify and address quality issues. Ability to work collaboratively with cross-functional teams, including production and engineering. Strong documentation skills to maintain accurate records of inspection data and other quality related activities. Commitment to continuous improvement of quality processes and procedures. Proficiency in using quality management software and Microsoft applications. Preferred Qualifications: Bachelor's Degree or Technical Certificate in a relevant field Six Sigma and/or Lean Expert certification. Experience with manufacturing processes: CNC machining, metal casting, injection molding. Measurement equipment programming experience: CMM, Keyence, MicroVu, etc. ASQ Certification Desirable The perks we offer: Medical, Dental, & Vision Insurance Life & Disability Insurance Paid time off and paid holidays 401k with company contribution Tuition Reimbursement Quarterly discretionary bonus program Flexible scheduling Relaxed and fun work environment Opportunities for advancement Wanner Engineering, Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status.

Job DescriptionDescription: Schedule: 1st Shift - 7:00 AM to 3:30 PM Join a well-organized warehouse team with a family-owned culture and strong support. This role is hands-on in both warehouse operations and quality inspections, helping keep production running smoothly and finished assemblies meeting our high standards. What You'll Do: • Receive, inspect, and store inbound shipments. • Stage parts and equipment for final assembly. • Perform stock transfers between warehouse locations. • Inspect outbound finished assemblies for quality. • Package, shrink wrap, and label shipments. • Operate forklifts, cranes, and other equipment. • Maintain a safe, clean, and organized warehouse. What You'll Get: • Comprehensive benefits package including health, dental, and vision insurance; 401(k) with company contribution; life and disability coverage; plus generous PTO and paid holidays. • All tools, uniforms, and equipment provided. • Opportunities for growth with our upcoming facility expansion. • A team that values quality, safety, and teamwork - and enjoys company events like golf outings, summer parties, and more. Requirements: • Warehouse and inventory experience required. • Valid driver's license. • Ability to lift 75 lbs (equipment available for heavier items). • Forklift experience preferred. • Strong attention to detail and teamwork.

JOB SUMMARY The Quality Technician develops, supports, and maintains quality systems and processes that meet company and customer needs. This position provides focused quality support of manufacturing and business processes to ensure the delivery of product that meet our customers' expectations. This position will drive successful deployment and maintenance of business processes, tools, and training that contribute to compliance with business best practices. The Quality Technician will influence change across all business disciplines and will team up to do so with Manufacturing, Engineering, Purchasing, and Production. KNOWLEDGE AND SKILL REQUIREMENTS Associates degree or related (2-10 yrs.) experience in a technical role. Exceptional mechanical aptitude. Basic understanding of assembly processes. Experience with ISO 9001. Experience with ERP systems. Basic understanding of Lean Manufacturing is desired. Experience in conducting or shadowing of audits is desired. Ability to focus on both internal and external customer relationships and effectively manage expectations. Ability to handle multiple tasks simultaneously and ability to manage project timelines. Proficient in Microsoft Office: Word, Excel and Outlook. Strong interpersonal communication skills both verbally and in writing. Ability to stand, walk and sit for extended periods of time. PRIMARY RESPONSIBILITIES TECHNICIAL Calibration & Metrology - Help to, administer and maintain calibration program. Responsible for calibration, cleaning, repair and storage of various gages and their corresponding calibration documentation. Execute Gage Repeatability & Reproducibility (R&R) studies and interpret results to help determine gage capabilities. Production Testing - Maintain quality assurance metrics on scrap and first pass yield as well as additional quality reports, files and production-related metrics Supply Chain Quality Management - Responsible for preparing and retaining First Article Inspection (FAI), Production Part Approval Process (PPAP) and Temporary Deviation (TD) paperwork. Document & Record Control - Act as Document Control Administrator for plant. Create work instructions for quality processes and maintain orderly recording and maintenance of both physical and electronic controlled documents and records. Ensure current versions are available at point of use and that obsolete documents are removed and cancelled from system. CONTINIOUS IMPROVEMENT Inspection -Maintain and review trends in receiving inspection and act as a back-up to receiving inspector/RMA coordinator. Quality Management System (QMS) - Assist Quality Team in maintaining our plant-wide, ISO9001:2015 complaint QMS. PROBLEM SOLVING Non-conforming Materials -Manage a process for marking, segregation and review of rejected materials. Lead team through disposition, data collection, short and long-term corrective action, supplier interaction, reporting, and trend analysis. Corrective Action - Help conduct investigative and thorough inquiries to seek root cause and determine corrective actions using 8D, 5-Whys, Fishbone or other quality tools. Audit - Conduct 6S, product, process and/or systems audits within the plant. OTHER Other duties as assigned. COMPETENCIES 1. ORGANIZING, PLANNING AND DECISION MAKING: Analyzes problems, identifies issues, establishes priorities and accomplishes outcomes in a sequential fashion; anticipates needs and develops alternative courses of action in recognition of changing conditions. 2. KNOWLEDGE AND SKILL: Acquires training or skills to apply up-to-date knowledge to achieve results; demonstrates innovativeness in applying leading edge technology and/or new procedures and approaches. 3. JOB COMMITMENT: Willingly accepts responsibility and performs expected and unexpected tasks as needed. Demonstrates initiative and tenacity; exerts extra effort when necessary to get the job done. Performs effectively under stressful conditions. 4. RESULTS ORIENTED: Able to focus on the desired outcome of assigned tasks and completing tasks on schedule. Sets challenging goals, focuses effort on goals, and meets or exceeds goals. 5. LEADERSHIP: Keeps the company vision, mission and values at the forefront of actions and decision making and encourages others to do the same. Is able to organize and influence a group of people to achieve a common goal COMPANY PROFILE Hydra-Flex was founded in 2002 as 2 men, a beer fridge, and a machine shop - driven by the simple belief that we could "find a better way" to manufacture innovative and reliable fluid handling products. Our core values of innovation, reliability, and accuracy are evident in the products we develop - products that are revolutionizing the way our customers do business. Today, with equipment in thousands of locations, Hydra-Flex is proud to maintain its reputation as The Most Trusted Name in Chemical Dispensing. Based in Savage, MN, we are a part of a vibrant Twin Cities community of innovators. Our people are passionate problem-solvers who believe in a purpose. With an all-out war on waste, our mission is to develop innovative products that solve problems, save precious resources, reduce operating costs, and provide exceptional and measurable results for our customers. Listed on the Inc. 5000 Fastest Growing Private Companies, the MSPBJ Fast 50, MinneInno 50 on Fire, a Top Inventor, an Employer of Excellence and winner of multiple MN Manufacturing Awards, Hydra-Flex is a small, dynamic organization that has a track record of growth with aggressive plans for the future. We're proud to say that we're leading the way for others to follow. Fostered by a work hard, play hard culture, we set the bar high, and when we achieve our goals we celebrate.

**Job Title** _Advanced Quality Engineer_ **Collaborate with Innovative 3Mers Around the World** Choosing where to start and grow your career has a major impact on your professional and personal life, so it's equally important you know that the company that you choose to work at, and its leaders, will support and guide you. With a wide variety of people, global locations, technologies and products, 3M is a place where you can collaborate with other curious, creative 3Mers. **This position provides an opportunity to transition from other private, public, government or military experience to a 3M career.** **The Impact You'll Make in this Role** The person hired for the position of **Advanced** **Quality Engineer** will be responsible for ensuring consistent product quality aligned with customer needs throughout the designed product life. This specific role will support optical films, adhesives, materials, and novel combinations in Display and Electronics Product Platform through New Product Introduction (NPI) projects and providing support on Change Managed (CMP) projects through appropriate risk analysis (FMEA) and addressing key risks. As an Advanced Quality Engineer you will have the opportunity to tap into your curiosity and collaborate with some of the most innovative people around the world. Here, you will make an impact by: + Respond to customers as needed (product development and customer specifications, complaints and CAPA, key account management including customer agreements, data analysis, etc.) + Lead continual quality improvement projects to improve quality and reduce Defective Parts per Million (DPPM) + Lead quality tool usage within project teams + Manage customer complaints in 3M Customer Issue Resolution (CIR) system within product responsibility area + Develop test methods: documentation, training, Measurement System Analysis (MSA), round robins + Develop visual reference standards, visual test methods, and align visual detection systems + Product qualification planning, testing, and analysis + Lead the development of Quality Functional Deployment (QFD), Failure Mode and Effect Analysis (FMEA), Control Plans + Document and improve the Quality Management System **Your Skills and Expertise** To set you up for success in this role from day one, 3M requires (at a minimum) the following qualifications: + Bachelor's degree or higher in Science, Technology, Engineering or Mathematics discipline (completed and verified prior to start) + One (1) year of experience working or interning in a Quality Engineering, Product Engineering and/or Manufacturing environment in a private, public, government or military environment Additional qualifications that could help you succeed even further in this role include: + Experience working with automated inspection systems + Bachelor's degree or higher in Engineering, Physics, Chemistry, Mathematics/Statistics or related discipline from an accredited institution + Minimum 3-years of Quality Engineering and/or Product Engineering + Experience in Manufacturing + Experience leading cross-functional teams and/or projects + Lean Six Sigma training with proven ability to understand and apply Lean Six Sigma and other quality tools to product, systems and process problems + Working knowledge of International Organization for Standardization (ISO) 9001 standards + Test method development experience **Work location:** + **Work location:** This role follows an on-site working model, requiring the employee to work **at least four days a week at the 3M Center in Maplewood, MN** . + **Travel:** **May include up to** **25% domestic/international** + **Relocation:** **May be authorized** **Must be legally authorized to work in country of employment without sponsorship for employment visa status (e.g., H1B status).** **Supporting Your Well-being** 3M offers many programs to help you live your best life - both physically and financially. To ensure competitive pay and benefits, 3M regularly benchmarks with other companies that are comparable in size and scope. **Chat with Max** For assistance with searching through our current job openings or for more information about all things 3M, visit Max, our virtual recruiting assistant on 3M.com/careers. Applicable to US Applicants Only:The expected compensation range for this position is $98,413 - $120,282, which includes base pay plus variable incentive pay, if eligible. This range represents a good faith estimate for this position. The specific compensation offered to a candidate may vary based on factors including, but not limited to, the candidate's relevant knowledge, training, skills, work location, and/or experience. In addition, this position may be eligible for a range of benefits (e.g., Medical, Dental & Vision, Health Savings Accounts, Health Care & Dependent Care Flexible Spending Accounts, Disability Benefits, Life Insurance, Voluntary Benefits, Paid Absences and Retirement Benefits, etc.). Additional information is available at: **************************************************************** Good Faith Posting Date Range 10/01/2025 To 10/31/2025 Or until filled All US-based 3M full time employees will need to sign an employee agreement as a condition of employment with 3M. This agreement lays out key terms on using 3M Confidential Information and Trade Secrets. It also has provisions discussing conflicts of interest and how inventions are assigned. Employees that are Job Grade 7 or equivalent and above may also have obligations to not compete against 3M or solicit its employees or customers, both during their employment, and for a period after they leave 3M. Learn more about 3M's creative solutions to the world's problems at ********** or on Instagram, Facebook, and LinkedIn @3M. Responsibilities of this position include that corporate policies, procedures and security standards are complied with while performing assigned duties. Safety is a core value at 3M. All employees are expected to contribute to a strong Environmental Health and Safety (EHS) culture by following safety policies, identifying hazards, and engaging in continuous improvement. Pay & Benefits Overview: https://**********/3M/en\_US/careers-us/working-at-3m/benefits/ 3M does not discriminate in hiring or employment on the basis of race, color, sex, national origin, religion, age, disability, veteran status, or any other characteristic protected by applicable law. **Please note: your application may not be considered if you do not provide your education and work history, either by: 1) uploading a resume, or 2) entering the information into the application fields directly.** **3M Global Terms of Use and Privacy Statement** Carefully read these Terms of Use before using this website. Your access to and use of this website and application for a job at 3M are conditioned on your acceptance and compliance with these terms. Please access the linked document by clicking here (************************************************************************************************* , select the country where you are applying for employment, and review. Before submitting your application, you will be asked to confirm your agreement with the terms. At 3M we apply science in collaborative ways to improve lives daily as our employees connect with customers all around the world. Learn more about 3M's creative solutions to global challenges at ********** or on Twitter @3M or @3MNews. 3M does not discriminate in hiring or employment on the basis of race, color, sex, national origin, religion, age, disability, veteran status, or any other characteristic protected by applicable law.

Job Title: Quality TechnicianJob Description We are seeking a dedicated Quality Technician to play a crucial role in maintaining and improving product quality standards. This position involves assisting in various quality assurance activities including audits, inspections, and process evaluations to ensure all products meet design specifications and company standards. Responsibilities + Assist in first article inspections, FMEA, PFMEA, and out-of-box audits to ensure products meet design specifications and identify potential areas of improvement. + Support the qualification of raw materials and component parts, ensuring they align with quality standards through PPAP and ongoing quality monitoring. + Contribute to in-process controls and resolution of component issues. + Help develop quality processes and documentation to ensure supplier products and processes meet technical standards. + Inspect selected incoming materials for compliance with specifications, such as drawings, BOMs, routing guides, workmanship standards, and safety requirements. + Collect data and generate inspection and discrepant material reports, as well as manage product movements. + Perform source inspections and audits to validate product conformance, internal manufacturing/assembly processes, and supplier process controls. + Maintain accurate quality records of inspection and audit activities. + Support routine maintenance and calibration of quality equipment. Essential Skills + Experience with quality and inspection equipment. + Proficiency in interpreting 3D CAD drawings and Bill of Material structures. + Experience using Microsoft Office. + Prior experience with ERP systems. Additional Skills & Qualifications + Knowledge of quality control techniques and tools such as calipers, micrometers, and gauges. + Ability to read full engineering drawings and obtain measurements. + Experience in first article inspections and receiving inspections to ensure quality control. Work Environment The Quality Technician will work in a collaborative environment, utilizing quality control equipment and software to maintain high standards. The role may involve routine maintenance and calibration activities, and the technician will be expected to adhere to standard safety and quality practices. Job Type & Location This is a Contract position based out of Saint Paul, MN. Pay and Benefits The pay range for this position is $25.00 - $31.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Saint Paul,MN. Application Deadline This position is anticipated to close on Jan 2, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com (%20actalentaccommodation@actalentservices.com) for other accommodation options.

Ramsey,MN Exp 2-5 yrs Degree Bach Job Description We are the largest electrical distribution cooperative in Minnesota and is a progressive organization that provides electric service to customers in a 7-county area north of the Twin Cities. Our organization received the highest ranking in reliability and the ability to restore power of all electric utilities nationwide in the 2014 American Customer Satisfaction Index. We are currently seeking an experienced Engineer with excellent analytical skills to guide the Engineering department in developing and applying standards that result in the most cost effective, reliable distribution system. The individual in this position will develop and maintain construction standards and specifications for the distribution system that includes new technologies, materials, methods and products. Key areas of responsibilities include: • Create standards and identify new materials to design, construct, and maintain a quality system while continuously analyzing and striving to make improvements • Develop and maintain construction specifications • Research and prepare major material purchase specifications for equipment • Research and evaluate new products • Review equipment and material failures and implement necessary corrective measures • Provide technical guidance to distribution system design and construction departments • Develop, publish, and distribute construction specification books to ensure all system construction will meet strength and clearance requirements and to minimize construction costs, while meeting standards and codes Required Talents, Skills, Expertise, Education • BS degree in Electrical, Civil, Mechanical or Industrial Engineering • Five years' experience in electric distribution, transmission or substation engineering in a utility focused environment • Engineer-in-training with ability to obtain Professional Engineer license in Minnesota • Knowledge and ability to apply standards and codes • Excellent oral and written communication skills Preferred Talents, Skills, Expertise, Education • Knowledge and ability to apply National Electrical Safety Code • Power emphasis in Electrical Engineering • Professional Engineer license in Minnesota • Drafting software skills SKILLS AND CERTIFICATIONS Engineer-in-training with ability to obtain Professional Engineer license in Minnesota Excellent oral and written communication skills SCREENING QUESTIONS Please seriously evaluate where Ramsey, MN is located and the climate in this area. Based on your evaluation and if necessary, would you be willing to relocate to MN? Do you have a BS degree in Electrical, Civil, Mechanical or Industrial Engineering? Do you have five or more years experience in electric distribution, transmission or substation engineering in a utility focused environment? IDEAL CANDIDATE The ideal candidate has 5+ years' experience in electric distribution system applications. A Power emphasis in Electrical Engineering, Professional Engineer license in Minnesota, familiarity with National Electric Code and drafting software skills would be ideal. IDEAL CANDIDATE SHOULD HAVE WORKED FOR THE FOLLOWING COMPANY(IES): Xcel Energy, other electric co-operatives or municipalities, engineering consulting firms that specialize in power Additional Information All your information will be kept confidential according to EEO guidelines. Direct Staffing Inc

We're looking for people who put their innovation to work to advance our success - and their own. Join an organization that ensures a more secure world through connecting and protecting our customers with inventive electrical solutions. Job Description We're looking for people who put their innovation work to advance our success - and their own. Join an organization that ensures a more secure world through connecting and protecting our customers with inventive electrical solutions. What YOU WILL EXPERIENCE IN THIS POSITION: Provide quality assurance support and lead root cause problem solving activities that are aligned to improve internal and external quality levels, supporting overall customer satisfaction of our products. This position is a development track to a quality engineering position, by providing structured involvement with quality engineering responsibilities. Lead problem solving activities for both product and manufacturing processes, with assistance from Quality Engineer Perform process validations, in-process inspections, and monitoring, analyzing the quality of manufacturing processes and products Provide support to design, manufacturing, and quality engineering functions for data collection, analysis, product review, and process capabilities Understand, adhere to, and develop processes compliant with the Quality Management Systems (QMS) objectives, as well as train other personnel to adhere to QMS standards Disposition NCR product and assign appropriate resolution Provide formal documented FAI reports suitable for customer or internal use as required Determine and use appropriate measuring tools and equipment to verify dimensional and functional requirements Effectively communicate with appropriate areas as needed, (Operations, Supply, Manufacturing Engineering, Design, Quality, Customer Service, Production Planning, Logistics, etc.) Lead and/or assist in supporting the activities that maintain the calibration status of inspection, test, and measurement equipment Perform other related duties as assigned You have: Academics: High school diploma or GED American Welding Society (AWS) Certification as Certified Welding Inspector (optional) Ability to read blueprints. GD&T knowledge is a plus. Previous experience in or with: 2+ years working in the quality/manufacturing field Ability to use measurement tools and techniques - strongly preferred Strong knowledge and understanding of charting and process control methods preferred Experience with Quality Management Systems (QMS) preferred Skills: Strong written, verbal, and interpersonal communication skills Attention to detail and ability to prioritize tasks is key to being successful in this role Must be able to interpret order requirements, drawings, and draw conclusions Ability to use precision measuring equipment (e.g., calipers, micrometer, paint mill gauges, etc.) Skilled in identifying root causes of routine problems/issues and the ability to develop recommendations for resolution Ability to interpret and apply Quality Systems / ISO procedures and documentation Comfortable using computer systems and software including MS Office Applications Abilities to meet the physical and environmental demands: Lift up to 50lbs Stand and walk frequently Operate hand tools Work primarily indoors where there is frequently noise of 85 dB and occasional exposure to chemical hazards (solvents) WE HAVE: A dynamic global reach with diverse operations around the world that will stretch your abilities, provide plentiful career opportunities, and allow you to make an impact every day nVent is a leading global provider of electrical connection and protection solutions. We believe our inventive electrical solutions enable safer systems and ensure a more secure world. We design, manufacture, market, install and service high performance products and solutions that connect and protect some of the world's most sensitive equipment, buildings and critical processes. We offer a comprehensive range of systems protection and electrical connections solutions across industry-leading brands that are recognized globally for quality, reliability and innovation. Our principal office is in London and our management office in the United States is in Minneapolis. Our robust portfolio of leading electrical product brands dates back more than 100 years and includes nVent CADDY, ERICO, HOFFMAN, ILSCO, SCHROFF and TRACHTE. Learn more at ************** Commitment to strengthen communities where our employees live and work We encourage and support the philanthropic activities of our employees worldwide Through our nVent in Action matching program, we provide funds to nonprofit and educational organizations where our employees volunteer or donate money Core values that shape our culture and drive us to deliver the best for our employees and our customers. We're known for being: Innovative & adaptable Dedicated to absolute integrity Focused on the customer first Respectful and team oriented Optimistic and energizing Accountable for performance Benefits to support the lives of our employees Pay Transparency nVent's pay scale is based on the expected range of base pay for this job and the employee's work location. Employee pay within this range will be based on a combination of factors including knowledge, skills, abilities, experience, education, and performance. Where federal, state, or local minimum wage requirements exist, employee pay will comply. Compensation Range: $23.90 - $44.40 Per Hour Depending on the position offered, employee may be eligible for other forms of compensation, such as annual incentives. Benefit Overview At nVent, we value our people and their health and well-being. We provide a broad benefits package with meaningful programs for eligible full-time employees that includes: Medical, dental, and vision plans along with flexible spending accounts, short-term and long-term disability benefits, critical illness, accident insurance and life insurance. A 401(k) retirement plan and an employee stock purchase plan - both include a company match. Other supplemental benefits such as tuition reimbursement, caregiver, personal and parental leave, back-up care services, paid time off including volunteer time, a well-being program, and legal & identity theft protection. At nVent, we connect and protect our customers with inventive electrical solutions. People are our most valuable asset. Inclusion and diversity means that we celebrate and encourage each other's authenticity because we understand that uniqueness sparks growth.