Quality engineer jobs in Jacinto City, TX - 669 jobs

Through direction and guidance from the President and the Director of Quality, the Quality Manager drives continuous process improvement, best practice sharing, and the implementation of best practices across branches. The Quality Manager is accountable for customer audit preparedness, the NCR/CAR Program, and the implementation and accountability for work procedures and work instructions associated with the company's Quality Management System. Primary Duties & Responsibilities: Assist the Director of Quality in developing new processes, products, materials, and technologies to improve shop operation efficiencies. Train Production Managers, Operations Managers, and other Shop Management on developed shop operation and quality processes and procedures as needed. Drive continuous improvement in shop (assembly & repair) operations and warehouse management to eliminate waste, reduce defects (Non-Conformance Reports), and reduce throughput time. Conduct internal quality audits and customer audits within the identified regions. Assist the Director of Quality in developing company QMS work instructions and procedures to spread best practices for machinery, production board, and general operations from branch to branch and provide corresponding training within the identified regions. Enforce Vytl Standardization procedures. Monitor branch-level accountability to company QMS within the identified region. Oversee work processes to ensure that internal and external quality standards are followed. Coordinate with Operations, Quality and Sales departments to resolve any non-conformance issues, and responsible for decreasing overall non-conformance rate. Coordinate with Branch and Operation Managers to optimize Labor Utilization Rate at all branches. Communicate with customers, as required, to develop and maintain good working relationships and find additional ways to improve the execution of shop operations. Onsite Vendor Audits to comply with API Q1 / 6D requirements. Positional Requirements & Qualifications: Education & Experience American Society of Quality (ASQ) Certified Auditor (preferred) Safety Council training (preferred) Current TWIC card (preferred) Industrial valve/actuator OEM factory-authorized training certificates (preferred) 10 years minimum industry experience API Q1 / 6D knowledge and experience High school diploma or GED equivalent Bachelor's degree (preferred) Skills & Abilities Highly organized Effective time-management Detail-oriented Strong computer skills and experience with Microsoft Office software Strong interpersonal, communication, technical, and presentation skills Must be able to travel and have a clear driving record in accordance with company driving guidelines. Clear background check and drug/alcohol screening. Essential Physical Functions: Travel: less than 40% Lifting up to 50 pounds Bending, stooping, walking, and/or ability to stand for up to 75% of shift.

Major Responsibilities/Activities: Assess the implementation of the Quality Program and provide guidance on improvements. Provide the Mistras personnel with guidance in the application and implementation of the Quality Assurance Program. Contribute to the process of writing, revising and implementation of the Mistras Quality Manual, Procedures, Forms, etc. Conduct Principal Level 3 activities, and/or support for specific clients or industry (i.e. Aerospace, Nuclear, DoD, etc.). Lead and participate in internal quality and process audits. Manage the Corrective and Preventive Action process and perform data analysis. Effectively communicate with customers, responding to inquiries regarding the Mistras Quality Program. Coordinate and assist with customer/external quality audits, including the completion of corrective actions and audit attendance when necessary. Manage with the review of contracts, purchase orders, job travelers and work instructions. Manage and oversee the personnel qualification and certification process, maintaining records, working with NDT Level III certifiers. Manage the implementation of new procedures within the company. Ensure changes to the Quality Assurance Program are documented by either revising the affected documents or reviewing the revised documents. Minimum Requirements: Minimum of 5 years of experience managing and auditing ISO 9001 Quality Systems. Hold Level 3 Certifications in at least two testing methods and/or at least 4 years of direct experience in the management of quality activities. Must have experience with NAVSEA quality program management. Must hold or willing to obtain Lead Auditor Certification. Excellent communication and customer service skills, with the ability to interact effectively with internal stakeholders and external clients. Proficiency in Microsoft Office applications, including Word, Excel, PowerPoint, and Outlook. Ability to manage multiple priorities in a dynamic work environment and meet defined deadlines. Willingness and ability to travel to job sites and assigned locations, including after-hours incident response and on-call availability. Approximately 40% travel required, including occasional overnight and weekend stays. Essential Physical Functions: Ability to lift 30 pounds This job description reflects management's assignment of essential functions; and does not prescribe or restrict the tasks that may be assigned. Mistras Group is an Equal Opportunity Employer/Veterans/Disabled. MISTRAS Group, Inc. is committed to equal employment opportunity. Employment decisions including initial hiring and all matters involving the terms and conditions of employment will be made without regard to any protected class under applicable law. If hired, the employment relationship is “At-Will,” which means that employment can be terminated at any time, and for any reason, at the option of either the Company or the employee. Please direct questions about these policies to a MISTRAS Group, Inc. Human Resources representative. By submitting & signing , I hereby understand and agree to the terms and conditions of employment as outlined above. I certify that the responses and information provided in this application (including any other supporting documentation such as a cover letter, resume, or transcript) are true and accurate to the best of my knowledge. I understand that misrepresenting or omitting information requested is cause for dismissal at any time, without notice. I hereby give the Company permission to contact schools, previous employers (unless otherwise indicated), references, and others disclosed in my application. Note to Applicants: Smoking is prohibited in all indoor areas of the Company. Employees may use designated smoking areas (if established) in accordance with applicable state and local law. Rhode Island Applicants: The Company is subject to Chapters 29-38 of Title 28 of the General Laws of Rhode Island, and is therefore covered by the state's workers' compensation law. Initial (if applicable): Massachusetts Applicants: I understand that it is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Initial (if applicable): Maryland Applicants: I UNDERSTAND THAT UNDER MARYLAND LAW, AN EMPLOYER MAY NOT REQUIRE OR DEMAND, AS A CONDITION OF EMPLOYMENT, PROSPECTIVE EMPLOYMENT OR CONTINUED EMPLOYMENT, THAT ANY INDIVIDUAL SUBMIT TO OR TAKE A POLYGRAPH OR SIMILAR TEST. AN EMPLOYER WHO VIOLATES THIS LAW IS GUILTY OF A MISDEMEANOR AND SUBJECT TO A FINE NOT EXCEEDING $100. Mistras Group, Inc. is an Equal Opportunity Employer/Veterans/Disabled:

Dover Precision Components is hiring a Quality Manager for our FW Murphy Production Controls brand, located at our Rosenberg, TX facility. We offer competitive pay and benefits and the ability to be part of the market leader at a stable, growing, and innovative company. We design and manufacture electrical controls supporting the oil and gas industry, primarily on an engineered-to-order basis. We are part of $7.5 billion Dover Corporation. WHAT YOU'LL DO In this role, you will own delivering sustainable performance through an effective Quality Management System (QMS) and continuous improvement goals. You will work cross- functionally to ensure quality in a Lean Manufacturing technical components' environment. You will supervise a Customer Quality Manager, 3 Quality Technicians, a Quality Engineer, and a Documentation Control Specialist. You will plan and direct activities to develop, apply, sustain, and improve the QMS to ensure external and internal requirements are met. Specific responsibilities include: Provide supervision, coaching, training, career progression opportunities, and mentoring for a Quality Team. Hire and supervise employees. Oversee internal and external quality, customer complaints, and all customer communication related to quality issues. Lead execution of corporate and specific site quality goals. Promote a proactive Built in Quality (BIQ) approach to quality and partners/collaborates with internal stakeholders to achieve site's performance goals. Manage activities related to the ISO Certification. Lead and serve as the subject matter expert for advanced problem-solving methodologies. Collaborate with internal stakeholders to modify and continuously improve processes to enhance quality, and stability of processes. Develop and promote Built in Quality concepts into the quality system using methodologies such as Poke Yoke, Quality Gates, and Upstream Certification process. Design and implement policies and procedures to ensure that quality standards are met during production. Ensure testing of processes and products are conducted per documented standards. Develop training programs and materials and conduct training sessions on quality concepts. Work closely with Team Leaders and production personnel on all shifts to provide guidance and instruction on proper inspection and reporting procedures. Confer with customers on changes in quality standards and communicate requirements to internal stakeholders. Establish and use programs to evaluate precision and accuracy of production and testing/measurement equipment. Develop and devise standards and methods for inspection, testing and evaluation of materials, in process and finished products. Develop process control methodologies to ensure quality requirements. Audit and qualify suppliers to ensure compliance with standards. Collaborate with suppliers on problems or necessary corrective actions to be taken. Investigate deviations from standards and completes necessary analysis. Coordinate government or customer visits for source inspection or quality system audits. Conduct visits to obtain required customer acceptance of products and maintain all associated records and documentation as needed. Review materials, components or products returned under warranty claims. Analyze reason(s) for failure and advise customers of action to be taken. Report and monitor Quality performance metrics. Conduct/coordinate analysis to determine failure root cause and ensure necessary actions are taken to improve quality performance metrics. WHAT YOU'LL BRING Bachelor's degree required; preference for Engineering field, other degrees considered depending on work experience. 7+ years' work experience in an engineered product environment with specific experience in product and/or material quality and compliance. Supervisory experience, to include mentoring, performance reviews, and hiring. Lean Six Sigma manufacturing experience. Project Management experience or training. Experienced in quality audits and working collaboratively with internal and external partners to ensure quality standards are set and achieved. Excellent problem- solving skills and demonstrated success in root cause analysis and troubleshooting. Excellent collaboration and communication skills. Strong computer skills, including ERP, MS Office, and data visualization. Ability to travel (overnight 10-15%) to meet customers, internal partners, and/or attend conferences. ALSO GREAT IF YOU BRING/ PREFERENCES Electrical components, control panels, and/or automation product expertise preferred. Master's degree in engineering or related technical field. Lean Six Sigma Certification. Certification in Quality (i.e. Six Sigma, CQE, etc.) is preferred. Must be willing to obtain certifications if not already accredited. Strong understanding and application of engineering principles and design practices. Experience with Quality Management Systems. DOVER PRECISION COMPONENTS Dover Precision Components 'DPC' ('the Company') is part of Dover Corporation's ('the Parent Company') Pumps and Process solutions segment. DPC holds market leading positions globally and delivers performance-critical solutions across the oil & gas, power generation, marine, industrial, chemical and general processing markets. We design and manufacture mission-critical equipment components to deliver more affordable, cleaner energy solutions and enable manufacturers to operate more efficiently. WE DELIVER CUSTOMER SUCCESS Dover Precision Components delivers products and services that enhance performance, improve safety, reduce carbon emissions, and accelerate clean energy adoption, through collaborative Customer relationships, expert engineering, and an innovative culture. Our strong Company portfolio is comprised of long products and services offered under Cook Compression, Cook Mechanical Field Services, Waukesha Bearings, Waukesha Magnetic Bearings, Inpro/Seal, Bearings Plus, and FW Murphy Production Controls. Our global footprint reaches more than twelve locations in the Americas and more than six locations in Europe and China. BUILDING POTENTIAL. SUSTAINING PERFORMANCE. BOOSTING FUTURES. We are diligent in recognizing our employees' needs and providing an enriching experience through professional developmental opportunities. Our authentic, collaborative company culture, combined with a competitive suite of health and welfare offerings, emulates who we are. We consider several job-related, non-discriminatory factors when determining the pay rate for a position, including, but not limited to, the position's responsibilities, a candidate's work experience, a candidate's education/training, the position's location, and the key skills needed for the position. Pay is one of the Total Rewards that we provide to compensate and recognize employees for their work. All qualified applicants will receive consideration for employment without discrimination on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, age, genetic information, or any other factors prohibited by law. Job Function : If you are an individual with a disability and require a reasonable accommodation to complete any part of the application process, please let us know. Likewise, if you are limited in the ability to access or use this online application process and need an alternative method for applying, we will determine an alternate way for you to apply. Please contact [email protected] assistance with an accommodation. #LI-AS6 Nearest Major Market: Houston Job Segment: Lean Six Sigma, Six Sigma, Quality Manager, Facilities, Management, Quality, Operations, Customer Service

Company Profile Oceaneering Space Systems (OSS) develops, integrates, and applies new and innovative technologies to meet the challenges of working in space and other harsh environments. We are ideally positioned to meet the growing needs of NASA and the expanding commercial and Department of Defense (DOD) markets. Oceaneering Aerospace and Defense Technologies (AdTech) delivers solutions that enable humans to work safely and effectively in harsh environments - from underwater to the outer reaches of space. Our innovative solutions support the development and application of practical, cost-effective systems that meet our customers' challenges - from routine to extreme. Our experience and expertise across multiple industries uniquely positions us as a leader in the government, space, and maritime services markets. Our products and services meet the rigorous demands of the complex environments in which they operate, delivering results without compromising safety or reliability. Oceaneering is a global provider of engineered services and products, primarily to the offshore energy industry. We develop products and services for use throughout the lifecycle of an offshore oilfield, from drilling to decommissioning. We operate the world's premier fleet of work class ROVs. Additionally, we are a leader in offshore oilfield maintenance services, umbilicals, subsea hardware, and tooling. We also use applied technology expertise to serve the defense, entertainment, material handling, aerospace, science, and renewable energy industries. Position Summary Are you passionate about solving complex problems? Join our dynamic team as a Quality Engineer and become a vital contributor to the quality of aerospace products at Oceaneering Space Systems! As an integral part of our organization, you'll play a crucial role in ensuring the flawless execution of quality assurance functions and deliverables to our aerospace customers. This role will give you the opportunity to immerse yourself in the thrilling world of flight hardware development and precision manufacturing for aerospace applications. Your contributions will ensure that our flight hardware not only meet - but outperform all standards and expectations. As a Quality Engineer, you'll find yourself at the forefront of innovation, collaborating with a passionate team who shares your dedication to excellence. If you're seeking to immerse yourself in an environment where your skills and expertise will make a genuine impact, we invite you to join our team! We are seeking someone with a keen eye for detail, a strong commitment to owning their work, and providing superior quality. You should be a person who thrives in a diverse environment and who is comfortable communicating at all levels of the organization. To be successful in this role, you should have a sense of genuine, engaging curiosity, and a desire for growth and continuous learning. Someone in this role would typically have a Mechanical or Electrical Engineering Degree and 5+ years of experience working with ISO 9001 and/or AS9100 quality assurance programs. Duties And Responsibilities Some of your major responsibilities will include: Lead the review of customer contracts, extract applicable quality requirements and champions its execution through various design and fabrication process stages. Liaisons with internal and external customers, including vendors, to ensure compliance with quality assurance processes. Support the review and release of mechanical or electrical engineering drawings for compliance related to customer specifications, configuration management, traceability rules, inspection capabilities, design requirements, and quality deliverables. Support the review and release of work authorizing documents and nonconformance report dispositions to ensure compliance with AS9100 and internal company procedures. Applies Mandatory Inspection Points (MIPs) for steps that need secondary inspection verification. Audit and approve suppliers to Quality Management System requirements of AS9100 or ISO 9001 and ensure that the supplier can meet the technical specifications levied by Oceaneering & the customer. Creates and reviews vendor procurement documents like Statement of Work to ensure all requirements can be met, including inspection, testing, and other verification activities. Participate in customer-led milestone design reviews and present the status of quality assurance deliverables. Work closely with customer quality assurance personnel to ensure Oceaneering meets all customer expectations or has a plan for re-negotiated terms and deliverables. Responds actively and positively to all customer requests, including the government (DCMA). Serve as a member of the Material Review Board and assure appropriate disposition, cause, and corrective action on discrepancy reports and disposition records, as well as maintaining follow-up on open reject tags and discrepancy reports until they are satisfactorily closed. Facilitates corrective action board meetings, taking a leadership role to ensure root cause analysis is done thoroughly and corrective actions identified. Ensure that products delivered to the customer and associated documentation meet customer quality requirements and are delivered error-free and within schedule. Uphold OSS quality goals and perform metric trending for customer reporting and continuous improvement efforts within the quality organization as well as company-wide. Champions a continuous improvement mindset to improve Oceaneering processes for effectiveness. Qualifications BASIC QUALIFICATIONS: To be successful in this role, you will need to to meet the following requirements. Have a Bachelor's degree from an accredited college in technical disciplines (mechanical engineering, electrical engineering, manufacturing, aerospace engineering, etc). 5 years of experience and knowledge of manufacturing/quality processes and documentation in an ISO9001 or AS9100 environment. Ability to comprehend and interpret engineering drawings, work instructions, schematics and specifications. Experienced in leading/supporting teams on failure analysis and root cause discovery techniques, and assessing corrective actions. Good verbal communication skills, good technical writing skills, and detail oriented. Proficient in Microsoft Office Tool suite (i.e.: Word, Excel, and PowerPoint). Willing to occasionally work off shifts, overtime, weekends and on site to meet product deliveries. US Citizenship PREFERRED EXPERIENCES: Experience working directly with direct with customers, managing customer quality requirements and delivering data items for customer review. Experience with approving engineering drawings and work planning documents. Experience with managing the dispositioning of nonconforming items. Familiarity with NASA (or other major aerospace contractor) human space flight certification and approval processes. Exposure to NASA workmanship standards (NASA-STD-8739.1, NASA-STD-8739.2, NASA-STD-8739.3 and NASA-STD-8739.4) and IPC workmanship standards (e.g IPC-J-STD-001). Exposure to inspection tools such as CMMs, FARO ARM, Height Gage, etc. Exposure to Geometric Dimensioning and Tolerancing (GD&T). Additional Information PAY, BENEFITS AND WORK SCHEDULE We offer a comprehensive and competitive benefits package. Employee benefits vary by role, however, may include Health and Wellness, Mental Health, Retirement Savings, Life and Disability, Paid Maternity and Parental Leave, Paid Time Off, Tuition Reimbursement, and an Employee Assistance Program. Equal Opportunity Employer All qualified candidates will receive consideration for all positions without regard to race, color, age, religion, sex (including pregnancy), sexual orientation, gender identity, national origin, veteran status, disability, genetic information, or other non-merit factors. How To Apply Regular full-time employees who apply will be considered along with external candidates. Employees with less than six months with their current position are not eligible to apply for job postings. Please discuss your interest in the position with your current manager/supervisor prior to submitting your completed application. It is highly recommended to apply through the PeopleSoft or Oceanet portals.

About us At ExxonMobil, our vision is to lead in energy innovations that advance modern living and a net-zero future. As one of the world's largest publicly traded energy and chemical companies, we are powered by a unique and diverse workforce fueled by the pride in what we do and what we stand for. The success of our Upstream, Product Solutions and Low Carbon Solutions businesses is the result of the talent, curiosity and drive of our people. They bring solutions every day to optimize our strategy in energy, chemicals, lubricants and lower-emissions technologies. We invite you to bring your ideas to ExxonMobil to help create sustainable solutions that improve quality of life and meet society's evolving needs. Learn more about our What and our Why and how we canwork together. About Baytown With a population of more than 77,000, Baytown, Texas, is located in the Gulf Coast region of the United States, just east of Houston, the nation's fourth largest city. Those who live and work in Baytown will find an area rich in history, as well as opportunities for outdoor activities due to its proximity to scenic waterways, namely Galveston Bay, the San Jacinto River and Buffalo Bayou. Founded in 1919, ExxonMobil's Baytown Complex is located on approximately 3,400 acres along the Houston Ship Channel, about 25 miles east of Houston. Employing a workforce of more than 8,500, it is comprised of four manufacturing sites, including one in nearby Mont Belvieu, and a global technology center. These include the Baytown Refinery, one of the largest refineries in the United States, and the Baytown Olefins Plant, one of the largest ethylene plants in the world. Its scope of products includes fuels, lube oils, and chemical compounds used in a diverse range of products, from auto battery cases, diapers and tire inner tubes to pharmaceutical uses, food packaging, trash bags and more. The Baytown area sites are highly integrated, which makes the plants and products more efficient as we develop technologies to make cleaner fuels and work together to operate more safely and reliably. Learn more about what we do in Baytown here. What role you will play in our team Our Advanced Manufacturing Engineer (AME) holds a pivotal role in ensuring the seamless operation of all systems within a designated business unit. This position is essential to maintaining reliability, efficiency, and safety across our operations. Based in Baytown, Texas, the AME drives innovation, and long-term success by tackling complex challenges and spearheading strategic initiatives. Key responsibilities include: Solving intricate unit issues with deep technical insight Leading impactful improvement projects that elevate performance Providing expert reviews of process safety studies to uphold the highest standards Mentoring and coaching, shaping the next generation of engineers through hands-on training and guidance What you will do Serve as the Advanced Manufacturing Engineer within the business unit by: Participates on the unit Operations team Proactively identifies issues prior to Operations impact Leads troubleshooting efforts for complex unit problems Organizes resolution of technical issues Leads and/or participates in incident investigation teams Interfaces with external organizations (e.g., Engineering, Technology) Initiates, supports, and champions technically advanced solutions Maintains key interfaces (e.g., EM networks, Research Institutes and Academia, key vendors and suppliers) Provides technical reviews of special unit operations, unit operating changes / projects, and equipment strategies Identifies unit improvement ideas to meet site initiatives (e.g., energy, reliability, cost) Lead the development and implementation of larger improvement projects to support site initiatives Provides technical reviews of process safety studies for the business unit (e.g., HAZOPs, SRRs, LOPAs) Provides consulting on process safety for the unit Shares safety learnings Provides training and mentorship to other engineers Supports the network and associated EM sites Develops and expands technology via partnerships and developmental projects About you Skills and Qualifications: B.S. (or higher) degree in Civil, Mechanical, or Chemical Engineering 5+ years of industry-related experience Demonstrated design experience Excellent interpersonal and communication skills Capable of working independently and achieving high standards Capable of working with and leading teams effectively Mentor / role model for setting work standards and business ethics Leadership skills to influence Operations team Preferred Qualifications/ Experience: Experience in Petroleum Refining or Chemical industries or with an industry-adjacent contractor Experience in offsites systems (e.g., flares, storage facilities, shipping, logistics, docks, pipeline) Experience in Engineering support of Utilities operations in a plant manufacturing environment Your Benefits An ExxonMobil career is one designed to last. Our commitment to you runs deep: our employees grow personally and professionally, with benefits built on our core categories of health, security, finance, and life. We offer you: Pension Plan: Enrollment is automatic and at no cost to you. The basic benefit is a monthly annuity to be paid to you in retirement for the rest of your life. Savings Plan: You can contribute between 6% and 20% of your pay and are encouraged to enroll right away. If you contribute at least 6% to your savings plan, the Company will contribute a 7% match. Workplace Flexibility: We have several programs such as "Flex your Day", providing ad-hoc flexibility around when and where you work, as well as longer-term programs such as leaves of absence and part-time work. Comprehensive medical, dental, and vision plans. Culture of Health: Programs and resources to support your wellbeing. Employee Health Advisory Program: Provides confidential professional counseling for you and your family, including tools and resources promoting mental health and resiliency at no additional cost to you. Disability Plan: Income replacement for when you cannot work due to illness or injury occurring on or off the job. Enrollment is automatic and at no cost to you. More information on our Company's benefits can be found at ************************ Please note benefits may be changed from time to time without notice, subject to applicable law. Stay connected with us Learn more at our website Follow us on LinkedIN and Instagram Like us on Facebook Subscribe our channel at YouTube Equal Opportunity Employer ExxonMobil is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity, national origin, citizenship status, protected veteran status, genetic information, or physical or mental disability. Nothing herein is intended to override the corporate separateness of local entities. Working relationships discussed herein do not necessarily represent a reporting connection, but may reflect a functional guidance, stewardship, or service relationship. Exxon Mobil Corporation has numerous affiliates, many with names that include ExxonMobil, Exxon, Esso and Mobil. For convenience and simplicity, those terms and terms like corporation, company, our, we and its are sometimes used as abbreviated references to specific affiliates or affiliate groups. Abbreviated references describing global or regional operational organizations and global or regional business lines are also sometimes used for convenience and simplicity. Similarly, ExxonMobil has business relationships with thousands of customers, suppliers, governments, and others. For convenience and simplicity, words like venture, joint venture, partnership, co-venturer, and partner are used to indicate business relationships involving common activities and interests, and those words may not indicate precise legal relationships. Job ID: 82313

Job Description: Industrial Engineer The purpose of this position is to develop and sustain efficient operational methods for engineering, manufacturing, and supply chain that improve profitability. This position is responsible for calculating and maintaining production capacity and product cost. Key Responsibilities and Accountabilities: Coordinates plans equipment and machine layouts, workflow, and safety precautions to maximize utilization of plant and manufacturing facilities. Ensures compliance with established industry safety and design standards and guidelines. Evaluates worker productivity and recommends improvements to increase manpower efficiency and operating performance, reduce waste and delays, and promote cost control/reductions. Tracks and reports metrics to measure plant and equipment capacity output and identify equipment. Coordinates plans equipment and machine layouts, workflow, and safety precautions to maximize utilization of plant and manufacturing facilities. Continually identifying improvement opportunities and quantifying possibilities Collaborate with Quality and Methods engineers to create control plans. Analyze, challenge, and improve material flow and plant layout to optimize production safety, efficiency, quality and costs. Use sound engineering logic and reason to identify solutions, conclusions, and approaches to problems. Provide guidance and support to operational management by identifying improvement opportunities and helping lead the annual manufacturing and improvement plans. Define how a process should work and how changes in conditions, operations and environment will affect the process output. Skills, Knowledge and Abilities: Proven experience in leading Kaizen events. Experiencing in the implementation of 5s Experience in identifying waste thru the utilization of Lean Tools Firm understanding of performing root cause analysis. Experience in creating Work Instruction/SOP & workplace policies. Experience with workflow analysis Create and maintain required documentation for manufacturing process, including flowcharts, capacity, utilization study, standard work, cycle time, and line balancing. Collaborate w/ cross-functional teams/departments to gain better insights of processes. Lean Green Belt a plus. High Excel User; high proficiency required. Experience w/ creating dashboards and maintaining KPI's Experience in developing Quality Standards and Controls is a plus Visio software experience is a plus Strong communication skills Microsoft Power BI experience is a plus EDUCATION & EXPERIENCE Bachelor's degree in industrial engineering and/or up to three years related field experience. Knowledge and exposure to fundamental theories, principles, and concepts. Strong verbal and written communication skills in English language Self-starter with minimal supervision requirement; able to work independently; ability to prioritize, organize work, and meet deadlines. Efficient computer skills; both Hardware and Software, plus MS Office software skills Equipment Maintenance & Reliability Knowledge

Toshiba International Corporation is a world leader in the design and manufacture of motors, motor controls and power electronics products. Many of these products are designed, built and tested in our 1,000,000 square foot state-of-the-art manufacturing facility in Houston, TX. We have developed a totally integrated manufacturing process from research and development, design, engineering, production and manufacturing to after-market service and sales & marketing. Toshiba differentiates itself from its competitors through its commitment to quality and reliability. We build products to perform in the most difficult conditions. From raw material to the finished product, we assure exacting quality, engineering excellence and stringent testing to meet domestic and international performance standards. Job Summary: Plans, directs, and coordinates manufacturing processes. Develops, evaluates, and improves manufacturing methods utilizing knowledge of product design, materials and parts, fabrication processes, tooling and production equipment capabilities, assembly methods, and quality control standards. Analyzes and plans work force utilization, space requirements, and workflow, and designs layout of equipment and workspace for maximum efficiency. Confers with planning and design staff concerning product design and tooling to ensure efficient production methods. Estimates production times, staffing requirements, and related costs to provide information for management decisions. Plans, directs, and coordinates manufacturing processes. Develops, evaluates, and improves manufacturing methods utilizing knowledge of product design, materials and parts, fabrication processes, tooling and production equipment capabilities, assembly methods, and quality control standards. Analyzes and plans work force utilization, space requirements, and workflow, and designs layout of equipment and workspace for maximum efficiency. Confers with planning and design staff concerning product design and tooling to ensure efficient production methods. Estimates production times, staffing requirements, and related costs to provide information for management decisions. Develop, evaluate, and improve manufacturing methods, utilizing knowledge of product design, fabrication processes, tooling, quality standards and production equipment capabilities. Able to analyze and plan work force utilization, space requirements, workflow, and design layouts of equipment and workcells for maximum efficiency with minimal supervision. Will include design of tooling, lifting devices, fixtures, etc. Evaluate safety procedures and reduce hazards throughout the plant. Work with R&D or design groups to go over design review process in new product development. Will utilize ERP with intermediate knowledge for assigned tasks such as pulling Bill of Materials (BOM) or pulling drawings from product life cycle management (PLM), engineering software tools or internal databases. Confers with vendors to determine product specifications and arrange for purchase of equipment, materials or parts, and evaluates products according to specifications and quality standards. Meet with internal groups to support manufacturing needs. Mentor and assist in the training and development of junior level engineers and technicians Strong awareness of manufacturing costs and process improvement. Tools/Equipment: MS Office, ERP, AutoCAD, SolidWorks, Pro-E/CREO use of various electronic instruments and measuring tools. Education: BSEE, BSME, BSIE Experience: 5-10 years relevant work experience The following knowledge or abilities are a plus, although not required for this position: Knowledge of Die-Casting, Machining, & Stamping Processes Knowledge of NC Programming & Software, particularly MasterCAM Knowledge of AutoCAD (2D), Creo (3D), & Windchill (PLM) Software Knowledge of Oracle Enterprise Business Suite (EBS) Ability to speak Spanish Work Environment: General office environment, with exposure to electrical and heavy industry hazards, possible non-climate-controlled environments Physical Requirements: Ability to lift up to 40 lbs., standing, stooping, climbing, kneeling, crawling Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Be visionary Teledyne Technologies Incorporated provides enabling technologies for industrial growth markets that require advanced technology and high reliability. These markets include aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, deepwater oil and gas exploration and production, medical imaging and pharmaceutical research. We are looking for individuals who thrive on making an impact and want the excitement of being on a team that wins. Job Description Summary Participate in a variety of technical and non-technical activities in support of the organization's manufacturing engineering needs including product and process design and redesign, sustaining engineering, and equipment and product testing across all manufacturing areas. Essential Duties and Responsibilities may include the following. Other duties may be assigned. Researches and analyzes data such as customer design proposal, specifications, and manuals to determine feasibility or application. Use broad knowledge of products, processes, and product use in the performance of job duties. Perform product research, design, development, and testing. Perform product redesign and enhancement. Perform production and test equipment design, development, and testing. Perform sustaining engineering. Participate in manufacturing process improvement activities. Implement design or process improvements that originate from manufacturing. Prepare and present proposals, statements of work, technical reports, etc. Design new equipment or operational procedures. Conduct labor operations time studies. Develop ERP labor and material routers in collaboration with manufacturing and supply chain. Provide technical support to manufacturing departments. Provide technical guidance to other personnel in manufacturing areas. Design, installation, maintenance and evaluation of manufacturing test equipment as well as tools, dies and fixturing. Manage material issues (internal and external) that arise in manufacturing (MRBs, NCMs, and CAPAs) working closely with QC Perform day-to-day technical and non-technical activities. May be assigned to lead and direct manufacturing engineering projects. Work with Manufacturing, Engineering/CADD to author and release Manufacturing Process/Work Instructions. May coordinate and direct other members of the engineering staff on assigned manufacturing projects. Work with SC to assist in procurement selection of raw materials used in in-house fabrications. Respond to inquiries or complaints from internal production departments, vendors, and customers. Participate in Company Quality and Safety systems. Performs all other duties requested, directed, or assigned. Daily availability to include evenings and weekends when necessary to reach goals and deadlines. Supervisory Responsibilities This job has no supervisory responsibilities but may provide technical leadership to lower level engineers including carrying out lead responsibilities in accordance with applicable regulations and laws and the organization's policies and procedures. This includes, but is not limited to training employees, planning, assigning, directing work and resolving technically related work problems. Competencies To perform the job successfully, an individual should demonstrate the following competencies: Analytical - Collects and researches data; Uses intuition and experience to complement data. Design - Generates creative solutions; Uses feedback to modify designs; Applies design principles; Demonstrates attention to detail. Problem Solving - Identifies and resolves problems in a timely manner; Gathers and analyzes information skillfully. Project Management - Communicates changes and progress. Technical Skills - Pursues training and development opportunities; Strives to continuously build knowledge and skills; Shares expertise with others. Oral Communication - Listens and gets clarification; Responds well to questions; Participates in meetings. Ability to communicate effectively with all levels of the organization and varying levels of technical knowledge. Written Communication - Writes clearly and informatively; Edits work for spelling and grammar; Presents numerical data effectively. Teamwork - Gives and welcomes feedback; Supports everyone's efforts to succeed. Business Acumen - Understands business implications of decisions. Ethics - Treats people with respect; Organizational Support - Follows policies and procedures; Supports organization's goals and values. Judgement - Includes appropriate people in decision-making process. Motivation - Demonstrate persistence and overcomes obstacles. Planning/Organizing - Prioritizes and plans work activities; Uses time efficiently. Professionalism - Approaches others in a tactful manner; Reacts well under pressure; Accepts responsibility for own actions; Follows through commitments. Quality - Demonstrates accuracy and thoroughness; Looks for ways to improve and promote quality; Applies feedback to improve performance; Monitors own work to ensure quality. Quantity - Completes work in timely manner; Strives to increase productivity. Safety and Security - Observes safety and security procedures including using Personal Protective Equipment (PPE) as required and wearing company issued badge when on company property; Reports potentially unsafe conditions; Uses equipment and materials properly. Adaptability - Adapts to changes in the work environment; Able to deal with frequent change delay, or unexpected events. Dependability - Follows instructions, responds to management direction; Commits to long hours of work when necessary to reach goals. Initiative - Seeks increased responsibilities; Asks for and offers help when needed. Innovation - Generates suggestions for improving work. Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and/or Experience: Bachelor's degree (B.S.) from four-year college or university in a related field and 10 years of directly related experience and/or training; or equivalent combination of education and experience. Experience with Automated Manufacturing Processes and Data is a plus. Language Skills: Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public. Mathematical Skills: Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply trigonometry, calculus and statistics for design, analysis and problem solving. Reasoning Ability: Ability to apply common sense understanding to carry out instructions furnished in written, oral or diagram form. Ability to deal with problems involving a few concrete variables in standardized situations. Computer Skills: To perform this job successfully, an individual should be knowledgeable in using software conducive to presenting analytical results, such as charts, graphs, and presentations using Excel, PowerPoint, Access, etc. Knowledge of LabView or Python coding languages are a plus. Other Essential Duties Follows all import/export requirements, consulting with facility import/export personnel as required. Other Skills and Abilities Basic Knowledge of ISO and/or AS9100 Working knowledge of Lean Manufacturing/6 Sigma/Kaizen Knowledge of specific software (design, analysis, ERP...) Other Qualifications Ability to travel domestically approximately 10%. Position may require one or more of the following (Site/CBU Specific): U.S. Person for access to ITAR-Controlled Technical Data. ITAR regulations dictate that information and material pertaining to defense and military related technologies may only be shared with US Persons unless authorization from the Department of State is received or a special exemption is used. A "U.S. person" can be A U.S. citizen; A permanent resident who does not work for a foreign company, a foreign government, or a foreign governmental agency/organization; A political asylee; A part of the U.S. government, or A corporation, business, organization, or group that is incorporated in the United States under U.S. law. A foreign person is any person who is not a lawful permanent resident of the US and includes foreign governments and organizations. Teledyne and all of our employees are committed to conducting business with the highest ethical standards. We require all employees to comply with all applicable laws, regulations, rules and regulatory orders. Our reputation for honesty, integrity and high ethics is as important to us as our reputation for making innovative sensing solutions. Teledyne is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age, or any other characteristic or non-merit based factor made unlawful by federal, state, or local laws.

Job Title: Process Engineer Job Description: Element Staffing is recruiting for a Process Engineer for a wastewater treatment company in Houston, TX. The Process Engineer serves as a key technical contributor in the design, development, optimization, and troubleshooting of water and wastewater treatment product lines. This hands-on, detail-oriented role requires a strong foundation in process engineering and a commitment to continuous improvement. The position involves close collaboration with cross-functional teams-including Sales, Proposals, Engineering, Project Management, Quality, Supply Chain, and Product Management-as well as direct interaction with customers and suppliers to support projects from initial concept through start-up/commissioning and operation. Local candidates only. Duties/Responsibilities/Qualifications: Develop cost-effective, technically compliant process solutions using company product offerings. Assist in reviewing client specifications and contribute to bid proposals and pricing strategies, in coordination with the Sales and Proposal teams. Prepare and review process engineering deliverables, including PFDs, P&IDs, control narratives, and O&M manuals during the detailed engineering phase, working closely with Project Engineers and Engineering team. Perform and verify process calculations based on influent water quality, operating parameters, and site-specific conditions to optimize system performance. Lead pilot studies from planning through execution and closure, in coordination with Product Manager, Manufacturing Engineers, Project Manager, Field Service personnels, and clients. Support system testing, start-up, commissioning, and performance audits. Contribute to R&D initiatives to enhance existing technologies or develop new products, working closely with the New Product Development & Product Management team. Troubleshoot field performance issues and provide technical support to end-users. Represent company in technical meetings with clients and vendors. Participate in HAZID and HAZOP studies, value engineering sessions, and design reviews. Conduct risk assessments, process audits, and performance diagnostics to identify process improvement opportunities. Collaborate with customers, contractors, and internal teams to resolve operational issues and implement corrective actions. Prepare and deliver technical reports and presentations. Perform process simulations, modeling, and data analysis Experience with process simulation and modeling software (e.g., Aspen, BioWin, GPS-X). Proficient in developing and interpreting PFDs and P&IDs. Strong understanding of process calculations (fluid dynamics, mass/energy balances, kinetics, thermodynamics). Hands-on knowledge of water and wastewater treatment systems, particularly those offered by company. Familiarity with national and international engineering codes and standards. Working knowledge of mechanical systems (pumps, blowers, valves, instrumentation). Understanding of automation systems (PLC, DCS, SCADA). Knowledge of environmental health and safety (EHS) regulations. Strong written and verbal technical communication skills. Proficient in data analysis and interpretation. Effective interpersonal skills for cross-functional collaboration. Ability to work independently and within a team environment. Additional Information: Years of Experience: 2-5+ years Education: BS Chemical, Mechanical, Environmental Engineering or related Shift/Travel: M-F, days + 20-30% travel Compensation: DOE Assignment Type: Contract to Hire Location: Houston, TX Local candidates only

If a culture of excellence, innovation and ownership is what you're searching for, consider putting your experience in motion at Flowserve. As an individual contributor, or as a leader of people, your enterprise mindset will ensure Flowserve's position as the global standard in comprehensive flow control solutions. Here, your opportunity for professional development and industry leading rewards will be supported by our foundational commitments to the values of people first, integrity and safety. Thinking beyond opportunity and reward, at Flowserve, we are inspired by working together to create extraordinary flow control solutions to make the world better for everyone! Role Summary: We are seeking a results-driven Manufacturing Engineer to join our team at Flowserve. In this role, you will plan, direct, and coordinate manufacturing processes including machining, coating, lapping, welding, assembly, and testing. You'll leverage your technical expertise in product design, materials, fabrication, tooling, and production methods to evaluate and enhance manufacturing processes. Using Lean and Six Sigma methodologies, you'll work to improve quality, reduce costs, and drive on-time delivery. This position also plays a key role in troubleshooting technical issues and supporting production teams with day-to-day engineering needs. Responsibilities: Lead capital projects: investigate, justify, procure, and implement equipment to support operational goals. Collaborate with Manufacturing Supervisors to address high-priority production issues and develop lean solutions that align with Flowserve's strategic objectives. Specify and procure manufacturing supplies that enhance efficiency and cost-effectiveness. Ensure tooling and fixtures are available and optimized to meet customer demands. Diagnose and resolve process and equipment issues to minimize production downtime. Contribute to the development of profit and strategic manufacturing plans; monitor progress of capital projects to ensure budget and timeline compliance. Stay current with emerging technologies in machine tools, tooling, and manufacturing methods; recommend innovations to improve throughput and quality. Create, maintain, and continuously improve manufacturing routings across all production areas. Ensure all processes, tooling, and fixtures comply with OSHA safety standards. Support and enforce Flowserve's environmental policies, ensuring compliance by both internal operations and subcontractors. Foster a team-oriented work environment and demonstrate respect in all interactions with colleagues and customers. Perform additional duties as assigned by management. Requirements: Bachelor's degree in Mechanical, Industrial, or Manufacturing Engineering (or related field), with 3-5 years of relevant experience. Proven track record of implementing cost-saving initiatives through Lean, Six Sigma, or other continuous improvement methodologies. Strong background in manufacturing environments, ideally involving complex, precision-engineered products. Proficiency with ERP systems and CAD software. Experience developing manufacturing routings and an understanding of cost accounting principles. Ability to interpret engineering drawings, safety standards, process documents, and maintenance procedures. Excellent communication skills, both written and verbal, with the ability to present to teams and stakeholders. Strong analytical and mathematical skills, including knowledge of geometry, trigonometry, algebra, and statistical analysis. Demonstrated ability to solve complex problems using a data-driven approach and logical reasoning. Comfortable working with technical documentation in various formats, including diagrams and abstract concepts. Benefits Starting from Day 1: Medical, Dental & Vision Insurance (including FSA and HSA options) Life Insurance + Supplemental Life, Child, Spousal, and AD&D Insurance Short- and Long-Term Disability Retirement Planning, 401(k) plan, & Financial Wellness Resources Educational Assistance Program Time off Policies (including sick leave, parental leave, and paid vacation) Eligibility requirements apply to some benefits and may depend on job classification and length of employment Flowserve is a world-leading manufacturer and aftermarket service provider of comprehensive flow control systems. Join a company whose people are committed to building a more sustainable future to make the world better for everyone. With 16,000+ employees in 50+ countries, we combine our global reach with local presence. Our team challenges themselves to approach each situation with ingenuity and creativity to help provide our customers with the most innovative flow control products and services. We support 10,000+ customers worldwide, creating products to meet the needs of our customers who are supplying energy, fresh water, pharmaceuticals and other essentials to consumers, businesses and governments globally. We invite you to put your talents and career in motion at Flowserve. Req ID : R-16556 Job Family Group : Engineering Job Family : EN Engineer - Multifamily EOE including Disability/Protected Veterans. Flowserve will also not discriminate against an applicant or employee for inquiring about, discussing or disclosing their pay or, in certain circumstances, the pay of their co-workers. Pay Transparency Nondiscrimination Provision If you are a qualified individual with a disability or a disabled veteran, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use or access flowservecareers.com as result of your disability. You can request a reasonable accommodation by sending an email to [email protected]. In order to quickly respond to your request, please use the words "Accommodation Request" as your subject line of your email. For more information, read the Accessibility Process.

At STERIS, we help our Customers create a healthier and safer world by providing innovative healthcare and life science product and service solutions around the globe. This position supports the preventative maintenance and building and assembly of all Plastic Injection Molds and components, as well as, any jigs or fixtures needed for production or other areas. This position will fill a Toolmaker role with an added focus on Operation and Training within a specific focus (EDM, Machining, Grinding, etc.). Shift: 1:00pm-9:00pm (8 hour days) What you will do as a Senior Toolmaker Train qualified trainee's in the safe and proper use of equipment (i.e. EDM - Sinker, Wire, and Hole Popper, Machining - Machining Center, Hard Mill, Bridgeport milling machines, Grinding - manual grinders) as per a development plan. Prepare molds for production. Read, interpret, and analyze blueprints; determine required machine operations; and consider the finish requirements for a task Inspect tools for defects and repair tools Work with cross-functional teams Inspect products and select the correct shop equipment, precision measurement devices and other tools needed for job Perform precision work to exacting tolerances and dimensions Practice safe machine shop practices and comply with safety standards The Experience, Skills and Abilities Required: Minimum ten years of hands-on experience with Mold Making/Tool Making required CNC and Manual experience preferred Ability to use Grinders, Mills, EDM, and other tooling machines proficiently Ability to read, interpret, and analyze blueprints Other: Journeyman preferred, or equivalent experience Good vision, hearing, and manual dexterity are required Must be highly proactive, customer-focused, trustworthy, and have integrity Ability to work in self-directed team environment required Must be willing to participate in Kaizen events Ability to read, write, speak, and understand English required Must be able to perform advanced math functions What STERIS Offers We Value our employees and are committed to providing a comprehensive benefits package that supports your heath, well-being, and financial future. Here is just a brief overview of what we offer: Market Competitive Pay Extensive Paid Time Off and (9) added holidays Long/short Term disability coverage 401(k) with company match Maternity & Paternal Leave Additional add-ons benefits/discounts for programs such as Pet Insurance Tuition Reimbursement and continues educations programs Excellent opportunities for advancement and stable long-term career STERIS is a leading global provider of products and services that support patient care with an emphasis on infection prevention. WE HELP OUR CUSTOMERS CREATE A HEALTHIER AND SAFER WORLD by providing innovative healthcare, life sciences and dental products and services. STERIS is a $5 billion, publicly traded (NYSE: STE) company with approximately 17,000 associates and Customers in more than 100 countries. If you need assistance completing the application process, please call 1 (440) ###.####. This contact information is for accommodation inquiries only and cannot be used to check application status. STERIS is an Equal Opportunity Employer. We are committed to equal employment opportunity and the use of affirmative action programs to ensure that persons are recruited, hired, trained, transferred and promoted in all job groups regardless of race, color, religion, age, disability, national origin, citizenship status, military or veteran status, sex (including pregnancy, childbirth and related medical conditions), sexual orientation, gender identity, genetic information, and any other category protected by federal, state or local law. We are not only committed to this policy by our status as a federal government contractor, but also we are strongly bound by the principle of equal employment opportunity. The full affirmative action program, absent the data metrics required by § 60-741.44(k), shall be available to all employees and applicants for employment for inspection upon request. The program may be obtained at your location's HR Office during normal business hours. Req ID: 43691 Job Category: Skilled Trades Location:

Be Part of an Extraordinary Team A proud member of the Elevance Health family of companies, Paragon Healthcare brings over 20 years in providing life-saving and life-giving infusible and injectable drug therapies through our specialty pharmacies, our infusion centers, and the home setting. Title: Quality of Life Program Manager- Paragon Ideal candidates will be comfortable traveling 60-70% of the time to local Hemophilia chapters across the U.S. The ability to attend Programs scheduled on nights and weekends will be required. Field: This field-based role enables associates to primarily operate in the field, traveling to client sites or designated locations as their role requires, with occasional office attendance for meetings or training. This approach ensures flexibility, responsiveness to client needs, and direct, hands-on engagement. Please note that per our policy on hybrid/virtual work, candidates not within a reasonable commuting distance from the posting location(s) will not be considered for employment, unless an accommodation is granted as required by law. Build the Possibilities. Make an Extraordinary Impact. The Quality of Life Program Manager- Paragon is responsible for developing and implementing innovative ""Quality of Life"" (QOL) programs for individuals with bleeding disorders to drive health outcomes and improve therapy adherence. How you will make an impact: Primary duties may include, but are not limited to: * Collaborate with territory representatives to leading the increased business generation and customer retention. * Develops and maintain business relationships with local chapters, clinics, and healthcare providers to enhance the business unit presence and impact in respective territories. * Utilize lifestyle tools and resources within the QOL program to empower patients in managing their health, thus fostering a sense of control over their condition. * Strategically integrate QOL initiatives into sales efforts to shorten the sales cycle and promote seamless health management solutions for patients. * Leverage the QOL program as a significant referral source, contributing to business growth while maintaining cost-effectiveness compared to traditional event sponsorships. * Monitor and evaluate the effectiveness of QOL programs regularly, making data-driven adjustments to ensure optimal patient engagement and satisfaction. * Collaborate with cross-functional teams to align QOL initiatives with overall company objectives and marketing strategies. Minimum Requirements: * Requires a BA/BS degree and a minimum of 10 years of related experience in Specialty Pharmacy; and experience in marketing software (Aperture and Photoshop); or any combination of education and experience which would provide an equivalent background. * Joint Health, Health and Nutrition and CPR certification are required. Preferred Skills, Capabilities and Experiences: * Prior experience as a professional Public Speaker is strongly preferred. For candidates working in person or virtually in the below location(s), the salary* range for this specific position is $71,544 to $112,194 Locations: Colorado, Washington State In addition to your salary, Elevance Health offers benefits such as, a comprehensive benefits package, incentive and recognition programs, equity stock purchase and 401k contribution (all benefits are subject to eligibility requirements). The salary offered for this specific position is based on a number of legitimate, non-discriminatory factors set by the Company. The Company is fully committed to ensuring equal pay opportunities for equal work regardless of gender, race, or any other category protected by federal, state, and local pay equity laws. * The salary range is the range Elevance Health in good faith believes is the range of possible compensation for this role at the time of this posting. This range may be modified in the future and actual compensation may vary from posting based on geographic location, work experience, education and/or skill level. Even within the range, the actual compensation will vary depending on the above factors as well as market/business considerations. No amount is considered to be wages or compensation until such amount is earned, vested, and determinable under the terms and conditions of the applicable policies and plans. The amount and availability of any bonus, commission, benefits, or any other form of compensation and benefits that are allocable to a particular employee remains in the Company's sole discretion unless and until paid and may be modified at the Company's sole discretion, consistent with the law Please be advised that Elevance Health only accepts resumes for compensation from agencies that have a signed agreement with Elevance Health. Any unsolicited resumes, including those submitted to hiring managers, are deemed to be the property of Elevance Health. Who We Are Elevance Health is a health company dedicated to improving lives and communities - and making healthcare simpler. We are a Fortune 25 company with a longstanding history in the healthcare industry, looking for leaders at all levels of the organization who are passionate about making an impact on our members and the communities we serve. How We Work At Elevance Health, we are creating a culture that is designed to advance our strategy but will also lead to personal and professional growth for our associates. Our values and behaviors are the root of our culture. They are how we achieve our strategy, power our business outcomes and drive our shared success - for our consumers, our associates, our communities and our business. We offer a range of market-competitive total rewards that include merit increases, paid holidays, Paid Time Off, and incentive bonus programs (unless covered by a collective bargaining agreement), medical, dental, vision, short and long term disability benefits, 401(k) +match, stock purchase plan, life insurance, wellness programs and financial education resources, to name a few. Elevance Health operates in a Hybrid Workforce Strategy. Unless specified as primarily virtual by the hiring manager, associates are required to work at an Elevance Health location at least once per week, and potentially several times per week. Specific requirements and expectations for time onsite will be discussed as part of the hiring process. The health of our associates and communities is a top priority for Elevance Health. We require all new candidates in certain patient/member-facing roles to become vaccinated against COVID-19 and Influenza. If you are not vaccinated, your offer will be rescinded unless you provide an acceptable explanation. Elevance Health will also follow all relevant federal, state and local laws. Elevance Health is an Equal Employment Opportunity employer and all qualified applicants will receive consideration for employment without regard to age, citizenship status, color, creed, disability, ethnicity, genetic information, gender (including gender identity and gender expression), marital status, national origin, race, religion, sex, sexual orientation, veteran status or any other status or condition protected by applicable federal, state, or local laws. Applicants who require accommodation to participate in the job application process may contact ******************************************** for assistance. Qualified applicants with arrest or conviction records will be considered for employment in accordance with all federal, state, and local laws, including, but not limited to, the Los Angeles County Fair Chance Ordinance and the California Fair Chance Act.

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company's two Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global's modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost. The Manager, Quality Supplier Program leads the end-to-end management of our supplier quality initiatives. This role ensures that all external suppliers meet or exceed Venture Global's quality, safety, and regulatory standards through rigorous assessment, continuous improvement, and strategic partnership. The Manager will collaborate cross-functionally with Engineering, Procurement, Regulatory Affairs, and Manufacturing to embed quality into the supply chain and mitigate risk. Responsibilities Define and implement the supplier quality strategy, aligning it with broader business objectives. Design and manage a supplier qualification program that includes risk assessments and a formal process for maintaining an Approved Supplier List. Establish a supplier approval and rationalization process in collaboration with the procurement team to optimize the supplier base. Develop and maintain quality management systems (QMS) for supplier interactions, ensuring compliance with standards such as ISO 9001. Act as the primary representative for supplier quality, interfacing with internal teams, contractors, and other stakeholders. Lead a strategic supplier risk assessment program to identify, evaluate, and mitigate risks. Manage the Supplier Corrective Action Request (SCAR) process for non-conforming materials to ensure timely root cause analysis and resolution. Develop and track Key Performance Indicators (KPIs) and scorecards for all suppliers and conduct regular performance reviews. Drive continuous improvement initiatives within the supply base using quality tools such as Lean, Six Sigma, and Failure Mode and Effects Analysis (FMEA). Provide technical guidance and training to suppliers to improve their processes and build their quality capabilities. Drive the quality mindset across supply chains through the execution of Quality Stand-downs to bring quality back to front and center, re-inforcing a strong quality culture. Qualifications A Bachelor of Science Bachelor's degree: Required in fields like Engineering (Mechanical, Electrical, Industrial), Science, Manufacturing, or Quality Management. A minimum of 10 years of experience in the Supplier Quality field with at least 5 years in a Leadership Role. Experience in LNG liquefaction facilities preferred. Ability to perform multiple tasks, work within project deadlines and adjust as priorities change. Possess the ability to mentor others through technical training and guidance. Have the ability to read and interpret engineer drawings to include P&IDs, Civil/Structural plans and details, Electrical Wiring Diagrams, Piping Isometrics, etc. Thorough knowledge and understating of all industry codes, standards, and industry best practices. Exhibit excellent written and oral communication skills. Have advanced computer experience with Microsoft Office, Microsoft Projects, PowerPoint, and Excel Work products. Strong knowledge of API Q1, ISO 9001, international quality standards, and technical matters related to ASME and API codes and standards Experience with audits, inspections, and supplier evaluations. Well-articulated with excellent written and verbal communication, planning, computing, technical, and interpersonal skills. Strong analytical and problem-solving skills. Ability to work independently and as part of a team. Willingness to travel, both domestic and international, if necessary. Broad knowledge and understating of all industry codes, standards, and industry best practices. Have advanced computer experience with software tools such as Smartsheet, Microsoft Office, Microsoft Projects, BI, PowerPoint, and Excel Work products. Ability to obtain a TWIC Card. Preferred Minimum Certifications Quality Certifications (API, ASQ, ISO) ASQ Certifications (CQA, CQE) Six Sigma Black Belt API/AWS/ASME Certifications Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law. #LI-Onsite

- Track, store and maintain part and product documentation in accordance with the Quality Management System - Propose improvements to the documentation management process - Communicate with internal customers to provide traceability and product documentation - Ensure all inspection and test activities are conducted safely. Participate in creation and review of HClientard Analysis and Risk Control for these activities. - Maintains HSE reporting requirements. - Inspect documentation, parts, components, materials, subassemblies and drilling equipment against written specifications. - Comply with applicable company written inspection procedures and standard work. - Perform manufacturing and engineering tests in compliance with applicable procedures and standard work. - Documents all deviations from engineering documents, inspection procedures and standard work. - Assist in designing tests and fixtures and their set-up. - When authorized, perform calibration of measurement systems. - Be familiar with inspection and test procedures, standard work and test plans, and provide input to continuously improve them. - Check that the assembly or production line adheres to standards and procedures. - Proposing improvements to the production process - Recording inspection results by completing reports, summarizing re-works into quality database **Responsibilities:** - Good written and verbal communication skills - Excellent problem-solving and analytical skills - Ability to use measuring devices like gauges, meters, calipers, and computers - Documentation and reporting skills - Attention to detail - Teamwork and collaboration - Actively working on the shop floor - Basic computer skills. **Experience:** - Entry level position 3-5 years of experience in quality. **Skills:** - Technology or Manufacturing - Non-Conformance Management - Documentation Management - Sub-arc welding inspection experience - Basic math skills - Excel knowledge - SAP knowledge - Visual Factory knowledge **Education:** -HSD **About US Tech Solutions:** US Tech Solutions is a global staff augmentation firm providing a wide range of talent on-demand and total workforce solutions. To know more about US Tech Solutions, please visit *********************** (********************************** . US Tech Solutions is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, colour, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Role and ResponsibilitiesPassionate about quality and manufacturing excellence? Join our team as a Quality Technician and help ensure our products, processes, and systems meet the highest standards. Collaborate with engineering and operations to drive continuous improvement and deliver outstanding results. Responsibilities Conducted inspections, tests, and measurements to ensure products consistently met quality standards. Identified defects, documented trends, and recommended process improvements that enhanced efficiency and product reliability. Supported root cause analysis and implemented corrective actions, reducing recurring quality issues. Collaborated with cross-functional teams to maintain process compliance and streamline operations. Assisted in developing and maintaining quality systems and documentation, ensuring regulatory and customer standards were met. Monitored product and process performance, driving improvements in yield and consistency. Led continuous improvement initiatives to optimize processes and reduce waste. Ensured adherence to company and customer quality requirements, contributing to high levels of customer satisfaction. Qualifications and Education Requirements Associate or bachelor's degree in engineering, Quality, or related field preferred Hands-on experience in manufacturing or quality inspection Strong attention to detail and problem-solving skills Knowledge of quality standards (ISO, GMP, or similar) is a plus Excellent communication and teamwork skills

-Conduct daily quality inspections on automotive components and production parts. - Perform measurements, testing, and documentation in compliance with customer and IATF/ISO standards. - Support incoming material inspections and ensure suppliers' parts meet specifications. - Prepare quality reports, maintain inspection records, and escalate issues to engineers or supervisors. - Assist in root cause analysis and corrective action implementation under engineer's guidance. - Operate inspection tools such as calipers, micrometers, gauges, and CMM machines. Requirements Associate degree in a technical field. - 1-3 years of quality inspection experience in manufacturing, preferably in automotive or mechanical components. - Familiar with quality tools and basic problem-solving (e.g., 5 Why, Pareto). - Hands-on skills and attention to detail, willing to work on the production floor. - Basic computer and reporting skills (Excel, ERP systems).

This role offers the opportunity to join a team that will help drive innovative solutions for industrial water and wastewater with a focus on high water recovery. We're pushing ultrafiltration and reverse osmosis technologies to new levels of performance, delivering exceptional outcomes for our customers. We're looking for a teammate who is deeply committed, resourceful in problem-solving, and dedicated to excellence. In this role, you will advance our water treatment solutions through hands-on process engineering, including treatment system design and testing. This is a well-rounded opportunity with strong potential for growth within the Western Midstream organization. This position is based out of The Woodlands, TX. Qualifications: * 2-5 years of experience in membrane system design (MF/UF/MBR/NF/RO), operations, and piloting * Recent hands-on experience with pilot operation and/or system startups * Strong knowledge of membrane processes and water chemistry * Ability to design, size, and optimize membrane system processes * Analytical skills to understand technical requirements and develop solutions * Attention to detail and strong problem-solving capabilities * Excellent organization and communication skills (written and verbal) * Computer literacy (e.g, Microsoft Word, Excel, Powerpoint, HMI/PLC). * Capable of working independently with management guidance * Excellent time management skills and ability to multi-task and prioritize work * Willingness to travel for field work as needed Responsibilities: * Plan and execute field pilots to demonstrate Western Midstream membrane solutions at customer sites * Conduct in-house validation trials for new products or applications * Analyze pilot data and prepare reports for clients * Develop cost-effective membrane system designs to meet customer needs * Sizing for equipment, pumps, piping, valves for water and wastewater treatment systems * Develop process documentation including P&IDs, mass balances, and control narratives * Support sales in developing technical proposals and performance guarantees * Assist with project management for installation, field design, and site work * Commission membrane systems, troubleshoot issues, and provide after-sales support Physical Requirements: * Ability to work in the field at our pilot sites which may include: * Moving safely around operating water treatment equipment to accomplish tasks * Outdoor elements such as precipitation, wind, high, and low temperatures Education: * Bachelor's degree required in relevant engineering subject matter (chemical, civil, environmental). Master's degree preferred. Grade and salary commensurate with relevant education and experience. Travel Requirements: * Travel of up to 25% is required for this role. Work Schedule: * This is a hybrid position that will work 9 hours Monday - Thursday and 4 hours on Friday. Western Midstream does not offer sponsorship of employment-based nonimmigrant visa petitions for this role. Western Midstream is an equal opportunity employer committed to diversity in recruiting, hiring, developing, compensating and promoting applicants and employees. All employment decisions are made without regard to sex, race, color, religion, national origin, citizenship, age, disability, marital or veteran status, sexual orientation, gender identity or expression, or any other legally protected categories. This includes providing reasonable accommodation for employee's and applicant's disabilities or religious beliefs and practices. To learn more about our Pay-for-Performance Compensation and our comprehensive benefits package, click here

An exciting career awaits you At MPC, we're committed to being a great place to work - one that welcomes new ideas, encourages diverse perspectives, develops our people, and fosters a collaborative team environment. Marathon Petroleum Company's Galveston Bay Refinery in Texas City, TX currently has a vacancy for a Unit Process Engineer in the Technical Services Department. Process Engineers provide technical support for plant operations. They will be assigned a specific unit or units within the Refinery with responsibilities of daily monitoring and troubleshooting of their areas, process optimization, and design and development of capital projects as well as major modifications to existing units. Process Engineers will apply state-of-the-art technology with regard to process simulation and optimization, recommend programs and procedures to increase the economic efficiency of refining operations, and work in a team environment with line operators and other engineers to maintain and troubleshoot control system problems as well as develop advanced control applications for their process units. **Relocation is approved for this position. KEY RESPONSIBILITIES: AREA TEAM SUPPORT Daily Process Monitoring - Communicate unit performance, optimization opportunities, and environmental performance. Assist troubleshooting efforts with unit upsets, product quality incidents, not meeting production plans, etc. Small to medium capital project process engineering support. Maintain current work lists with priorities. Key Performance Indicators (KPI) included as part of routine reporting (WABT curve, fouling, chemical and catalyst budgets, yields, etc.). Manage catalyst performance and coordinate catalyst change timing. Support unit operation within environmental limits. Develop justification and work scope for TAR and routine maintenance - specifically catalyst changeout, exchanger cleaning, furnace pigging, etc. Support / review operations procedures for start-up and shutdown. Review / approve vendor chemical programs. Inspect vessel internals for proper installation / tolerances of components. Monitor / approve catalyst loading. Publish recommendation memos and turnaround reports. Evaluate need to request more samples for troubleshooting. Daily interaction / communication with Board Operators. Provide after-hours support when appropriate - emergency call out. Alarm rationalization participation. Understand controls logic and any Advanced Process Controls (APC). PROJECT PROCESS LEADERSHIP Work with Area Team to develop project ideas and submit project request forms (PRF) with a memo detailing economic benefits and justification. Work with process controls group to develop / implement APC. Provide process design basis. PROCESS OPTIMIZATION Monthly Reports - Review unit KPI's for the month and include analyses when appropriate with supporting data. Include unit performance on key economic drivers. Include recommendations for performance and reliability improvements and compliance with environmental permits. Advisory Group Calls / Face to Face Technology Meetings - participate / attend / present. Schedule reviews with vendors / Technologists. Work with Technologists to understand and implement unit best practices. Set outside feedstock properties and discuss opportunity feeds with Product Control. Know / understand the process fully to identify constraints. Work with Product Control for setting appropriate unit targets. Unit yield monitoring and optimization. Key decision maker for selecting programs, catalyst loads, etc. Communicate with Product Control and other relevant groups regarding: Catalyst budget curves / current performance Operation against / changing process constraints Unit actual yields vs Linear Programming (LP) model yields - monitor accuracy of LP yields Understand Product Control targets and ensure proper implementation / understanding by Operations Support Product Control on required rigorous model runs as necessary TECHNICAL PSM STEWARDSHIP Critical Process Variables/ Not to Exceed (CPV/NTE) Maintenance and Operating Limits support Lead/Participate in the MOC process Perform environmental calculations (leaks, maximum intended inventory, etc.) Lead CAT1 and 2 Investigations for process related events Participate in unit hazard reviews (What-Ifs, HAZOPs) Support instrumentation Process Safety Information (PSI) and troubleshooting (thermowell calculations, orifices, etc.) Provide / approve special chemical procedures EDUCATION AND EXPERIENCE: Minimum (Required) Qualifications Bachelor's degree in Chemical Engineering required. (Education must be obtained/completed prior to start date) Zero (0) years or more of experience in process engineering within refining, petrochemical, or related industries required. Must be authorized to work in the US on a full-time indefinite basis without the need for employment visa sponsorship now or in the future. A valid Driver's License is required upon hire. Able to work off-hour duties such as plant shutdowns and routine on-call support. Preferred Qualifications Minimum of 2 years of experience in a refinery setting as a process engineer or experience as an MPC Co-Op. This positions grade may vary depending on candidate experience. The successful candidate will be placed at a level commensurate with experience and qualifications. As an energy industry leader, our career opportunities fuel personal and professional growth. Location: Texas City, Texas Additional locations: Job Requisition ID: 00019932 Location Address: 2401 5th Ave S Education: Employee Group: Full time Employee Subgroup: Regular Marathon Petroleum Company LP is an Equal Opportunity Employer and gives consideration for employment to qualified applicants without discrimination on the basis of race, color, religion, creed, sex, gender (including pregnancy, childbirth, breastfeeding or related medical conditions), sexual orientation, gender identity, gender expression, reproductive health decision-making, age, mental or physical disability, medical condition or AIDS/HIV status, ancestry, national origin, genetic information, military, veteran status, marital status, citizenship or any other status protected by applicable federal, state, or local laws. If you would like more information about your EEO rights as an applicant, click here. If you need a reasonable accommodation for any part of the application process at Marathon Petroleum LP, please contact our Human Resources Department at ***************************************. Please specify the reasonable accommodation you are requesting, along with the job posting number in which you may be interested. A Human Resources representative will review your request and contact you to discuss a reasonable accommodation. Marathon Petroleum offers a total rewards program which includes, but is not limited to, access to health, vision, and dental insurance, paid time off, 401k matching program, paid parental leave, and educational reimbursement. Detailed benefit information is available at ***************************** hired candidate will also be eligible for a discretionary company-sponsored annual bonus program. Equal Opportunity Employer: Veteran / Disability We will consider all qualified Applicants for employment, including those with arrest or conviction records, in a manner consistent with the requirements of applicable state and local laws. In reviewing criminal history in connection with a conditional offer of employment, Marathon will consider the key responsibilities of the role.

About Us Sino Biological is an internationally recognized reagent supplier and contract research organization, listed on ChiNext of the Shenzhen Stock Exchange (301047 Sino Biological Inc.). We specialize in the development of high-quality antibodies, antigens, and proteins using our proprietary mammalian cell-based recombinant expression system. With manufacturing facilities in Beijing, China, and a growing global presence, our U.S. headquarters is located in the greater Philadelphia area, with a bioprocessing facility in Houston, Texas. Our expansion into bioprocessing reflects our commitment to advancing innovation in the biotech field. This individual will manage a team of 20-30 staffs, oversee the scientific, operational, and business aspects of our custom protein and antibody services, ensuring world-class delivery to our clients. The ideal candidate combines strong technical expertise in bioprocessing with proven leadership and a client-oriented mindset. Key Responsibilities Lead all operations, covering protein and antibody expression, purification, QC, and project management. Develop and implement strategies to expand service offerings and ensure scalability, efficiency, and cost-effectiveness. Build, mentor, and manage a high-performing scientific and technical team. Serve as the primary scientific and operational leader for client projects, ensuring quality, timeliness, and customer satisfaction. Collaborate with Sales, Marketing, and Product teams to drive business growth and strengthen client partnerships. Establish KPIs and ensure continuous improvement in process quality, turnaround time, and client engagement. Represent the center in external forums (conferences, customer meetings, partnerships). Ensure compliance with company standards, safety, and applicable regulations. Qualifications Ph.D. in Molecular Biology, Biochemistry, Immunology, or a related field. Minimum 5+ years of industry experience in protein/antibody development or related bioprocessing field, including 3+ years in senior leadership with direct people management responsibilities . Strong technical expertise in recombinant protein and antibody expression using mammalian systems ; familiarity with additional platforms (insect, bacterial) a plus. Demonstrated success in leading teams within CRO/CDMO or pharmaceutical environments and delivering client-focused solutions . Proven ability to build, develop, and manage diverse scientific teams and foster a collaborative, high-performance culture. Strong project management skills with ability to balance multiple priorities in a fast-paced, dynamic environment . Excellent communication skills with a track record of engaging with global biotech/pharma clients. Why Join Us? At Sino Biological, we recognize that our people are our greatest asset. That's why we offer: Competitive compensation packages, including a base salary and performance incentives. Professional development and career advancement opportunities. A supportive and inclusive work environment where diversity is celebrated. Sino Biological is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. Join Us in Advancing Scientific Innovation! Be a part of Sino Biological and contribute to groundbreaking scientific advancements worldwide. Apply today to join our dynamic team!