Quality engineer jobs in Yorkville, IL - 756 jobs

The Senior Production Engineer provides technical leadership and strategic engineering support to pharmaceutical manufacturing operations, ensuring optimal asset performance, reliability, and compliance throughout the asset lifecycle. This role drives risk-based asset management strategies in alignment with ISO 55000 principles, GMP requirements, and business objectives, while partnering with Production, Maintenance, Quality, and Capital Projects teams. Main Responsibilities and Accountabilities: 1. Process & Equipment Engineering Provide senior-level frontline engineering support for complex equipment issues, leading structured troubleshooting and failure investigations. Such as, but not limited to fill/finish operations, including vial, syringe, and cartridge filling lines. Support isolator systems, including design, operation, and lifecycle management. Provide engineering oversight for vial washer, depyrogenation tunnel, isolator, capper, and aseptic transfer technologies. Ensure robust aseptic practices and contamination control throughout filling and finishing operations. Lead Root Cause Analysis (RCA) using recognized methodologies (e.g., FMEA, 5-Why, Fishbone) and ensure effective implementation of CAPAs. Define and drive equipment reliability strategies to improve availability, performance, and lifecycle cost. 2. Maintenance & Asset Health Monitoring Develop, review, and optimize preventive and predictive maintenance strategies based on asset criticality, historical performance, and condition monitoring data. Analyze asset health using CMMS data (SAP), including MTBF, MTTR, OEE contributors, and maintenance effectiveness KPIs. Champion predictive maintenance technologies and condition-based monitoring to reduce unplanned downtime and asset risk. 3. Change Management & Continuous Improvement Lead equipment-related changes through formal change control processes, ensuring GMP compliance, data integrity, and controlled risk. Drive continuous improvement initiatives focused on asset reliability, compliance, and operational efficiency, aligned with site and corporate asset management objectives. Work to improve equipment reliability as measured by Operational Equipment Effectiveness (OEE). Mentor junior engineers and technicians in reliability engineering, asset management principles, and GMP-compliant engineering practices. Provide technical training on aseptic equipment and best practices. 4. Asset Information & Lifecycle Management (ISO 55000 Alignment) Own and govern asset information across the lifecycle, ensuring integrity, traceability, and alignment with ISO 55000 Asset Information Management requirements, including URS, FS/DS, P&IDs, equipment files, and SAP CMMS records. Lead asset criticality assessments and risk-based prioritization using failure modes, risk priority numbers (RPNs), and business impact analysis to support maintenance and investment decisions. Ensure alignment between asset performance objectives, site asset management plans, and production demand. 5.Projects & Shutdown Support Lead equipment-related projects funded through Capital Expenditure (CapEx) or Operational Expenditure (OpEx), including scope definition, business case development, risk assessment, and execution. Provide engineering leadership during planned shutdowns, including scope planning, resource coordination, execution oversight, and post-shutdown performance review. Support equipment lifecycle decisions, including refurbishment, upgrade, and replacement strategies based on asset condition and business risk. 6. Compliance, Quality & Safety Ensure engineering activities comply with GMP, EHS, and ISO 55000/55001 requirements. Author, review, and approve SOPs/, change controls, deviations, and CAPAs. Lead and support qualification and validation activities (IQ/OQ/PQ), ensuring engineering documentation supports regulatory inspections and audits. Act as a subject matter expert during internal and external audits related to equipment, asset management, and reliability. 7. Completes any other duties/responsibilities assigned by senior management Position Qualifications and Experience Requirements: Education Bachelor's degree in Engineering (Mechanical, Chemical, Biomedical, or related field). Master's degree in Engineering or related field preferred 5+ years of engineering experience in aseptic fill/finish biotech or pharmaceutical manufacturing. 4+ years of experience with isolator, Vial Washer, Dehydrogenation Tunnel, Isolator, Capper. Experience Experience in Aseptic processing expertise Technical problem-solving and root cause analysis Knowledge of Six Sigma/Lean principles is a plus. Strong knowledge of sterile filling operations, aseptic techniques, and contamination control. Proven ability to successfully lead projects from start to finish, ensuring they are completed on time, within budget, and meet high standards of quality. Proven experience supporting cGMP environments and regulatory inspections. Competencies Strategic Planning & Execution Continuous Improvement & Lean/Six Sigma Team Leadership & Development Analytical Problem Solving Stakeholder Engagement & Communication Cross-functional collaboration About CSL Behring CSL Behring is a global biotherapeutics leader driven by our promise to save lives. Focused on serving patients' needs by using the latest technologies, we discover, develop and deliver innovative therapies for people living with conditions in the immunology, hematology, cardiovascular and metabolic, respiratory, and transplant therapeutic areas. We use three strategic scientific platforms of plasma fractionation, recombinant protein technology, and cell and gene therapy to support continued innovation and continually refine ways in which products can address unmet medical needs and help patients lead full lives. CSL Behring operates one of the world's largest plasma collection networks, CSL Plasma. Our parent company, CSL, headquartered in Melbourne, Australia, employs 32,000 people, and delivers its lifesaving therapies to people in more than 100 countries. To learn more about CSL, CSL Behring, CSL Seqirus and CSL Vifor visit ******************** and CSL Plasma at *************************** Our Benefits For more information on CSL benefits visit How CSL Supports Your Well-being | CSL. You Belong at CSL At CSL, Inclusion and Belonging is at the core of our mission and who we are. It fuels our innovation day in and day out. By celebrating our differences and creating a culture of curiosity and empathy, we are able to better understand and connect with our patients and donors, foster strong relationships with our stakeholders, and sustain a diverse workforce that will move our company and industry into the future. To learn more about inclusion and belonging visit ********************careers/inclusion-and-belonging Equal Opportunity Employer CSL is an Equal Opportunity Employer. If you are an individual with a disability and need a reasonable accommodation for any part of the application process, please visit ********************accessibility-statement.

LHH Recruitment Solutions has partnered with a growing organization, and they are seeking a motivated Quality Engineer to join their team. In this position, you will play a key role in supporting all aspects of the Quality function, with a strong emphasis on PPAPs, customer complaint resolution, supplier communication, and internal quality system reinforcement. You will also provide guidance and oversight to Quality Inspectors while working closely with operations to ensure consistent, compliant, and reliable manufacturing processes. Key Responsibilities: Lead and support PPAP activities, ensuring complete, accurate, and timely submissions. Respond to and manage customer complaints, including root‑cause analysis and corrective actions (8D, 5 Whys, etc.). Collaborate with operations to investigate internal and external quality issues and prevent recurrence. Assist with internal audits and maintain compliance with IATF, ISO, and customer‑specific quality standards. Serve as a liaison with suppliers, addressing quality questions, documentation needs, and product concerns. Partner with production and quality inspection teams to proactively resolve shop‑floor issues. Maintain and update quality documentation such as process flows, control plans, and FMEAs. Support continuous improvement activities across the organization. Participate in training initiatives related to quality processes and best practices. Qualifications and Skills: Bachelor's Degree in Engineering or a related technical field. Previous quality experience within an industrial manufacturing environment (machining experience or metal‑focused environment). Hands‑on PPAP experience. Working knowledge of IATF 16949 standards. Strong sense of urgency and ability to manage multiple priorities. Solid understanding of GD&T and measurement methods. Ability to communicate effectively with customers, suppliers, and internal teams. Proven problem‑solving abilities and attention to detail. Compensation Range: $90,000 - $105,000 + 10% Bonus Benefits Offered: 2 weeks of vacation, paid sick leave where applicable by state law, Medical Insurance, Dental Insurance Vision Insurance, 401K, and Life Insurance. If you are a passionate Quality Engineer looking for a new and rewarding career, please apply today! You don't want to miss out on this opportunity! LHH is a leader in permanent recruitment-and in the placement of top talent. Our areas of specialty include office administration, customer service, human resources, engineering, and supply chain and logistics. Please feel to check us out and apply for other opportunities if this role isn't a perfect match. Equal Opportunity Employer/Veterans/Disabled To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit **************************************

Compensation: up to $125k base Benefits: Health, dental and vision insurance Work Model: On-site with 40% travel LaSalle Network is hiring a Process Engineer to support a growing Center of Excellence initiative and elevate operational performance across multiple sites. This Process Engineer will play a critical role in standardizing best practices, improving production efficiency and driving continuous improvement efforts. If you have a mechanical mindset, thrive in hands-on environments, and bring experience from the paper or packaging industry, this Process Engineer opportunity offers a dynamic platform to make a meaningful impact. What's the job? Lead development and rollout of best practices for the Center of Excellence Analyze equipment, processes and workflow to identify optimization opportunities Conduct root-cause analysis and troubleshoot production challenges Collaborate with cross-functional teams to implement process improvements Support equipment performance evaluations and manufacturing audits Partner with site leadership and operators to ensure process standardization Manage small to mid-size engineering projects from concept through execution What's needed? Bachelor's degree in engineering or related field 3+ years of mechanical or process engineering experience Minimum 2 years of packaging experience (paper industry preferred) Proven ability to analyze processes, equipment and systems Strong leadership, organization and communication abilities Ability to travel up to 40% to multiple locations Ability to work on-site in PA, MI or Chicago What's in it for me? Competitive hourly compensation Health, dental and vision insurance Opportunity to influence enterprise-wide process standards High-impact role with visibility to leadership If you're ready to step into a highly influential Process Engineer role and advance your engineering career, apply today. Julie Hess Senior Project Engineer LaSalle Network LaSalle Network is an Equal Opportunity Employer m/f/d/v. LaSalle Network is the leading provider of direct hire and temporary staffing services. For over two decades, LaSalle has helped organizations hire faster and connect top talent with opportunities, from entry-level positions to the C-suite. With units specializing in Accounting and Finance, Administrative, Engineering, Marketing, Technology, Supply Chain, Revenue Cycle, Call Center, Human Resources and Executive Search, LaSalle offers staffing and recruiting solutions to companies of all sizes and across all industries. LaSalle Network is the premier staffing and recruiting firm, earning over 100 culture, revenue and industry-based awards from major publications and having its company experts regularly contribute insights on retention strategies, hiring trends, hiring challenges, and more to national news outlets. LaSalle Network offers temporary Field Employees benefit plans including medical, dental and vision coverage. Family Medical Leave, Worker's Compensation, Paid Leave and Sick Leave are also provided. View a full list of our benefits here: View a full list of our benefits here. All assignments are at-will and their duration is subject to change.

Our client, a leading food and beverage packaging manufacturer, is seeking a Plastics Process Engineer to join their team in Conyers, GA. Apply engineering knowledge and skills for moderately complex engineering projects focused on creating or improving process control systems and procedures from the raw material phase through the manufacture of prototypes and products ESSENTIAL DUTIES AND RESPONSIBILITIES Manage, prioritize and complete projects or programs of moderate to large size, scope, and duration Coordinate project work with other engineers, technicians, designers and/or or drafters Lead process failure discussions and investigations to ensure consistency of solutions across all facilities Perform feasibility studies for fabrication, assembly, machining, or processing Assist technicians with assembly and disassembly of process equipment and components in order to diagnose issues Troubleshoot, analyze, identify, evaluate, propose, implement, and document engineering solutions Develop and document standard operating procedures (SOPs) for equipment processes Collaborate with production personnel and other departments to gather information and draft reports, and improve equipment, processes, and products Create test parameters and participate in the testing, data analysis, and implementation of processes, equipment, and engineering solutions Identify broad conceptual ideas and develop them into useful solutions Establish continuous improvement plans where efficiency, quality, safety, or service can be improved EDUCATION, EXPERIENCE KNOWLEDGE, SKILLS, AND ABILITIES Requires one of the following: Bachelor's degree with an emphasis in engineering or related field of study and three (3) years of related engineering experience, OR Associate's degree and nine (9) years of related engineering experience Experience analyzing production equipment, processes and materials and solving issues Knowledge of various statistical and quality methodologies including but not limited to Statistical Process Control (SPC), Statistical Quality Control (SQC), 5S, 8D, Failure Mode and Effects Analysis (FMEA), Root Cause Analysis, Gage Repeatability and Reproducibility (R&R), and Design of Experiments (DOE) Prior experience working with thermoforming, injection molding, print, and/or paper equipment and processes Knowledge of the practical application of engineering science and technology. This includes applying principles, techniques, procedures, and equipment to the design and production of various products Knowledge of arithmetic, algebra, geometry, calculus, statistics, and their applications Knowledge of design techniques, tools, and principles involved in production of precision technical plans, blueprints, drawings, and models Knowledge of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of products Use logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems Ability to successfully prioritize, and organize projects, deadlines, and tasks with little supervision in both team and independent environments Strong verbal and written skills necessary to communicate intricate job-related information Bachelor's degree, preferred PHYSICAL DEMANDS, WORK ENVIRONMENT AND OTHER REQUIREMENTS Work is split between an office environment, production facility, and/or warehouse depending on the project Up to 10% domestic travel Ability to obtain and maintain a valid driver's license and passport Requires a valid driver's license and favorable motor vehicle report upon hire Exposure to extreme heat, loud noise, dirt, dust, odors, and fumes is probable Required to wear personal protective equipment (PPE) in required areas

Adecco is excited to announce immediate openings for Production Quality Associates in Joliet, IL, working with a top local client. This is your opportunity to be part of a dedicated team preparing fresh meal kits for delivery, ensuring customers receive delicious meals on time. The starting pay is $17.50 per hour with overtime opportunities available. Plus, you'll enjoy weekly pay, so you don't have to wait long to receive your hard-earned money! As part of the job, you will work in a refrigerated environment, assembling and packing meal kits. You'll help prepare fresh ingredients and assist with meal cooking, all while ensuring cooking equipment stays clean and in good working condition. Adecco offers comprehensive benefits including medical, dental, vision, and 401(k) options. And if you refer a friend, you'll be eligible for generous referral bonuses! Previous food, grocery, or restaurant experience preferred, but not required for this position! Candidates must have the ability to read, write and speak English fluently and have basic computer skills. Candidates must be able to stand for the entire shift, lift up to 50 lbs. and stay flexible, as tasks may vary. If you're ready to get started, simply click "Apply Now" for immediate consideration. Please note that you will be exposed to the top 8 food allergens: Eggs, Shellfish, Fish, Tree Nuts, Nuts, Wheat, Soy and Milk. Pay Details: $17.50 per hour Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: The California Fair Chance Act Los Angeles City Fair Chance Ordinance Los Angeles County Fair Chance Ordinance for Employers San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Teoresi Inc is an international Group, with offices in Europe and United States, that acts as an engineering partner to customers' product and process development. We are always looking for new talents and highly specialized professionals, more specifically for: Driveline Verification & Validation Engineer to support the development, testing, and validation of driveline systems across agricultural and off-highway vehicle applications. The role focuses on ensuring driveline performance, durability, and system reliability through comprehensive verification and validation (V&V) activities, utilizing advanced testing methodologies and NI-based toolchains. Key responsibilities for the position: Plan and execute Verification and Validation activities for driveline systems (mechanical and control aspects). Develop and run test procedures on rigs and vehicles to evaluate system performance, durability, and functional compliance. Utilize National Instruments VeriStand or TestStand and LabVIEW to implement test automation, data acquisition, and result analysis. Ensure testing is conducted in accordance with relevant standards, safety procedures, and customer requirements. Contribute to continuous improvement of testing methodologies and data management processes. Required Skills: Proven expertise in Driveline systems (mechanical layout, torque transfer, controls interface). Strong background in Verification & Validation processes, including test planning, execution, and reporting. Proficiency in National Instruments VeriStand or TestStand and LabVIEW toolchains for system testing and automation. Familiarity with vehicle communication networks (CAN, LIN) and data logging tools. Understanding of mechanical and control system interactions within powertrain and driveline domains. Profile Completes: Bachelor's degree in Mechanical, Electrical, Mechatronics, or Automotive Engineering. Minimum 3+ years of experience in driveline or powertrain testing and validation. Experience in the Agricultural sector or off-highway vehicle development is highly preferred. Strong analytical and problem-solving skills, with the ability to work both independently and in cross-functional teams Location: Chicago Metropolitan area Type of employment: Full-time Send your application if you are interested in learning more about potential opportunities and projects. Benefits offered by Teoresi, Inc. Teoresi, Inc. provides the following company insurance policies: Health, Vision, Dental, Life, Long Term Disability (LTD) and Short Term Disability (STD). Other benefits offered include 401(K) plan, Flexible Spending Account (FSA), Vacation, Sick paid leave and Holidays. We also inform you that, by sending your application, all your data will be processed in accordance with our privacy policy, which you can view at the following link ********************************************************

Reporting to the AME Manager, this position will be responsible for managing cross-functional projects delivering a continuous improvement of our safety, quality, delivery, and cost through the elimination of waste from our production processes, launching new products/processes into operations, and by educating and empowering our production staff. As an Advanced Manufacturing Engineer II you will: Manage Manufacturing Engineering projects. Preparation of detailed project plans with estimated project task hours and timelines for development, production, validation, and launch. Will be responsible for on-time, on-budget delivery of projects Oversee research and development of new manufacturing equipment, processes, standard operating procedures, and work instructions. Improve manufacturing processes through review of all engineering deliverables for technical accuracy and adherence to engineering standards and project schedules. Interact with Design Engineering, Operations, and Supply Chain teams to ensure design for manufacturability of new products. Participates in the design review process, and acts as a liaison for products from inception through shipment to the customer Will be involved in New product launches. Review new product design and work with design engineering to identify areas for improved product manufacturability, reduced manufacturing cost, and improved process reliability. Provide manufacturing feasibility during various phases of new products and new technologies. Identify new opportunities for process improvement. Analyze capital equipment needs for new technologies and business needs. Investigate, plan, and implement such capital projects Leading Projects through detailed plans and execution on innovative change across assigned assets, both equipment upgrades and equipment optimizations. Design and implement tooling and fixtures focused on error-proofing to eliminate waste in the manufacturing process and make operations safer. Conducts/leads or participates in Process Mapping, FMEA, RIE'S and 8 Step Problem Solving, Quality Control Plan development, DFM, initiatives to promote and ensure that processes are continuously improved Assist in the hiring, training, and mentoring of manufacturing engineers and support staff to work to their full potential. Support G&W manufacturing transformation to Industry 4.0 and Advanced Automation solutions Create and improve G&W project delivery process and standard tools used in delivering Advanced Automation solutions Review and write reports, approve expenditures, enforce rules. Recommend, plan and direct installation of new equipment. Communicate and collaborate with other managers and departments. Prepare and deliver engineering-related presentations as required. Assist with other duties as assigned We are looking for someone who: Holds a Bachelor's Degree in Industrial, Manufacturing, Mechanical, or related Engineering field Has 5+ years total experience. Is computer proficient; confident with data analysis programs Possesses problem-solving skills with experience using root cause analysis techniques Can provide examples of new product production integration or significant operational improvement projectsI Ideally you will also have: Project Management and Leadership Six Sigma, Red X, or other problem-solving certification CAD/CAM experience Experience working cross-functionally with all levels of the organization structure What we offer you: Typical pay is $80,000 - 94,915 annually. Please note the pay information shown above is a general guideline. Pay is based upon candidate skills, experience, and qualifications. This position is eligible for participation in our Quarterly Incentive Pay Program G&W Electric offers a comprehensive benefits package that includes: Medical, Dental and Vision Insurance Short and Long-Term Disability Life Insurance Health club membership program and reimbursement Employee Assistance Program Tuition Reimbursement 401 (k) Annual Profit Sharing Vacation Air-conditioned/heated state-of-the-art manufacturing facility About G&W Electric Innovating since 1905, G&W Electric has grown into a global leader in engineered electrical power grid solutions. Working with us means joining a worldwide team of passionate manufacturing professionals striving to continually improve the technologies the world depends on to deliver safe, reliable electricity. Our culture is focused on employee success, so we foster an entrepreneurial environment that encourages everyone to thrive. Learn more about our company by watching this video: G&W Electric enjoys a long reputation for product quality, innovation and world-class customer service to the power industry. We have established this reputation by believing that our greatest asset is our employees. We owe our success to the initiative and talents of highly skilled individuals within our team-based organization. Our goal is to set the standard for customer satisfaction by ensuring a superior level of service, performance and innovation. As a global organization and industry leader, we are committed to cultivating an engaging work environment that embraces our core values and develops our talent. Our continuous focus on growth and innovation means that you become part of a company that provides challenging opportunities, rewards excellence and combines your individual expertise to achieve a higher level of shared success. As part of our organization, you also help power the world! G&W Electric is proud to be an Equal Opportunity Employer. All employees and applicants will receive consideration for employment without regard to age, color, disability, gender, national origin, race, religion, sexual orientation, gender identity, protected veteran status, or any other classification protected by federal, state, or local law. G&W Electric participates in the E-Verify process for all new hires. G&W Electric participates in the E-Verify process for all new hires. VEVRAA Federal Contractor

Standard Work and Process Doc Development Safety and Manufacturing CNC Programming Development Entry Level Mistake Proofing related to Safety and Quality Control Plan, PFMEA, SFMEA and Risk Assessments Cycle Time Studies Standard Cost Review

Join an award winning team! Building component manufacturer, voted as one of Chicago's best companies to work for, is seeking a Manufacturing Quality Manager. Job Description Responsibilities will include: Oversee development and implementation of company safety & quality management system Develop and implement a quality plan to meet quality levels established by company guidelines and local regulations Lead and facilitate the quality champion program to analyze and correct nonconformance and complaints Collaborate with engineering to review project readiness and the purchasing of a supplier management strategy Work with company team members and local regulators to establish inspection protocols and ensure compliance Analyze and resolve process quality issues and needs as they relate to process performance and quality requirements Provide data related to KPI's and identify opportunities for improvement Travel to suppliers to ensure quality and process capacities are met Strive to develop a feeling of pride and loyalty to company and team members Champion Affirmitive Action Program in hiring, development and promotion opportunities Become familiar with company policies and train subordinates to follow guidelines Strive to improve leadership and management capabilities for personal development Qualifications BS in Engineering, Quality, Business or rleated degree 6+ years in a manufacturing or construction environment implementing quality programs Strong organizational and problem solving skills Track record of implementing Lean Manufacturing methodologies and Continuous Improvement Strong written and verbal communication skills Leadership ability U.S. Citizen or Green Card holder Additional Information Perks: Established and growing company Competitive pay and benefits packages Plenty of career growth opportunities

/ Designation: Program Manager Experience: 8 to 10 years Qualification: Any Graduate Job Type: Contract || Job location: Chicago, USA Duration: 6 months (extendable) Mode: Work from Office Job Description: • Quality Initiatives • Daily program management throughout the program life cycle • Defining the program governance (controls) • Planning the overall program and monitoring the progress • Managing the program's budget; • Managing risks and issues and taking corrective measurements • Coordinating the projects and their interdependencies • Managing stakeholder's communication • Aligning the deliverables (outputs) to the program's "outcome" with aid of the business change manager • Managing the main program documentations such as the program initiation document • Thorough understanding of project/program management techniques and methods • Excellent problem-solving ability • Assume responsibility for the program's people and vendors • Assess program performance and aim to maximize ROI • Change Management practices adherence • Managing a team with a diverse array of talents and responsibilities. • Program Management Training or Certification (PMP / PgMP / MSP / PRINCE2 ) • Cloud journey experience (e.g. Azure, GCP, AWS) • Cloud migration experience • Atlassian tools (Jira, Confluence etc) • End to End Program Management Qualifications Role Overview Position / Designation: Program Manager Experience: 8 to 10 years Qualification: Any Graduate Additional Information All your information will be kept confidential according to EEO guidelines.

Who We Are We're powering a cleaner, brighter future. Exelon is leading the energy transformation, and we're calling all problem solvers, innovators, community builders and change makers. Work with us to deliver solutions that make our diverse cities and communities stronger, healthier and more resilient. We're powered by purpose-driven people like you who believe in being inclusive and creative, and value safety, innovation, integrity and community service. We are a Fortune 200 company, 19,000 colleagues strong serving more than 10 million customers at six energy companies -- Atlantic City Electric (ACE), Baltimore Gas and Electric (BGE), Commonwealth Edison (ComEd), Delmarva Power & Light (DPL), PECO Energy Company (PECO), and Potomac Electric Power Company (Pepco). In our relentless pursuit of excellence, we elevate diverse voices, fresh perspectives and bold thinking. And since we know transforming the future of energy is hard work, we provide competitive compensation, incentives, excellent benefits and the opportunity to build a rewarding career. Are you in? Primary Purpose Transmission & Substation (T&S) Standards are responsible for maintaining and developing new standards and engineering practices that ensure standardized, efficient, safe, and cost-effective designs. This position is responsible for Overhead Transmission Line Engineering Design Standards including voltages of 765kV, 345kV, 138kV & 69kV. T&S Standards include Engineering Practices, Engineering Standard Practices, Material Specifications, Construction Specifications and Generic Design Drawings. This consists of various responsibilities including reviewing, updating, and facilitating the development of T&S design standards, while working closely with the T&S groups to ensure effective standard implementation. Provides technical expertise to strategic, legislative and operational decisions. This position collaborates with the other Exelon companies and is involved in creating, updating, and applying internal/industry design standards and technology in a specialized area of expertise. Position may be required to work extended hours for coverage during storms or other energy delivery emergencies. PLEASE NOTE: This position may provide relocation for eligible applicants on a case-to-case basis Primary Duties * Serves as a Subject Matter Expert for a specific class of T&S Standards including Engineering Practices, Engineering Standard Practices, Material Specifications, Construction Specifications and Generic Design Drawings. * Point of Contact for technical questions related to material application and design standards. * Works with Vendors on material design improvements and implementation * Collaborates with Equipment Specialists, Relay & Protection, Substation Engineering, Transmission Engineering, Capacity Planning, Transmission Planning, Testing & Commissioning Engineering, field groups, etc. to set the design and material standards and applications while ensuring safety, effectiveness, and constructability of standards. * Perform assignments while acting independently and may lead multi-discipline teams. * Provides recommendations for management and implements action plans to improve reliability. * Provides detailed technical training, mentorship, peer review, and/or guidance to others. * Interface with applicable industry groups such as IEEE, EPRI, EEI, MEA, etc. to introduce new design improvements and materials. * Investigate common points of failure modes and trends for the purpose of material or design standard improvements as well as supporting the analysis of extent of condition Job Scope * Influences project decisions having a significant impact on the company. * Applies technical knowledge to help promote a safe work environment and to enhance customer satisfaction. Minimum Qualifications * Bachelor of Science degree in Engineering or Licensed Professional Engineer (2) (3) * Ability to analyze and interpret complex electrical and mechanical systems. * Knowledge and ability to apply problem solving approaches and engineering theory * Knowledge of engineering designs, principles and practices. * Knowledge of complex field test equipment. * 4-7 years of professional engineering experience (1) (3) (See Note). * Broad knowledge and experience with regulations, guides, standards, codes methods, practices, and advanced engineering principles necessary to perform very complex or unique assignments for a specific * Minimum of two related career experiences (4) (i.e., changes in technical job responsibilities, which may or may not include a change in department) OR * Engineer in Training OR * 50% complete (by hours) with advanced technical degree, M.B.A. or Project Management Certification * (1) Master's degree in Engineering reduces the OJT experience requirement by 1 year. (2) License must be issued by the state in which you are practicing. (3) PE License reduces the OJT experience requirement by 1 year. (4) Career related experiences is defined as changes in technical job responsibilities and does not have to include a change in department Note: Items (1) and (3) are mutually inclusive, whereby the maximum experience requirement reduction is one(1) year (e.g., in the case of an employee with both a master's degree in Engineering AND a PE license, the minimum experience requirement would be reduced by one (1) year). Preferred Qualifications * Licensed Professional Engineer (2) (3) * Strong teamwork, interpersonal skills and the ability to communicate with all management levels. * Strong written and oral communication skills. * A working knowledge of applicable analysis software packages * Ability to analyze industry wide trends and implement enhancements Benefits * Annual salary will vary based on a candidate's skills, qualifications, experience, and other factors: $92,000.00/Yr. - $126,500.00/Yr. * Annual Bonus for eligible positions: 15% * 401(k) match and annual company contribution * Medical, dental and vision insurance * Life and disability insurance * Generous paid time off options, including vacation, sick time, floating and fixed holidays, maternity leave and bonding/primary caregiver leave or parental leave * Employee Assistance Program and resources for mental and emotional support * Wellbeing programs such as tuition reimbursement, adoption and surrogacy assistance and fitness reimbursement * Referral bonus program * And much more Note: Exelon-sponsored compensation and benefit programs may vary or not apply based on length of service, job grade, job classification or represented status. Eligibility will be determined by the written plan or program documents.

Chamberlain Group (CG) is a global leader in intelligent access and Blackstone portfolio company. Powered by our myQ technology, we make access simple and secure for millions of homeowners, businesses, and communities worldwide. Our flagship brands, LiftMaster and Chamberlain , are found in 51+ million homes, and 14 million+ people rely on the myQ app daily. This is a role within Chamberlain Group's Quality and Customer Satisfaction function. A successful incumbent is expected to (i) lead implementation of APQP practices within new product development teams; ensure execution of APQP methods and related deliverables, such as FMEA's, product assurance planning, CTQ's, and control plans, and (ii) work closely with marketing and new product development teams to identify CTQ attributes and then coach and guide teams with proper planning to achieve within the product and process design. Requires 5 years of experience in product Quality, and APQP methodologies and a minimum of a Bachelor's Degree in Engineering or equivalent experience. Essential Duties and Responsibilities Lead implementation of APQP practices within New Product Development teams; ensure execution of APQP methods and related deliverables, such as FMEA's, Product Assurance Planning, CTQ's, and Control Plans Work closely with Marketing and New Product Development teams to identify CTQ attributes and then coach and guide teams with proper planning to achieve within the product and process design Drive early supplier involvement reviews with cross-functional teams to continuously improve product quality from suppliers, and assist with Supplier Risk Management, where needed Assist with the Supplier Quality Assessment program; conduct studies and audits of supplier processes and products; analyze supplier capabilities and assist with developing supplier quality metrics Provide technical support or training to other employees for items such as APQP methods, inbound inspections or reworks Participate in development of DVP&R's and associated Test Plans with Design and Test Engineering both internal and contract manufacturing; participate in design reviews Work with Plant Quality to ensure Manufacturing Quality Plans are completed in the NPD process Track design quality metrics for Product Development projects Comply with health and safety guidelines and rules; managers should also ensure compliance across their teams. Protect Chamberlain Group's reputation by keeping information confidential. Maintain professional and technical knowledge by attending educational workshops, reading professional publications, establishing personal networks, and participating in professional societies. Contribute to the team effort by accomplishing related results and participating on projects as needed. Minimum Qualifications (requirements necessary to perform listed duties and responsibilities) Education/Certifications: Bachelor's Degree in Engineering or equivalent experience Experience: 5 years of experience in product Quality, and APQP methodologies Knowledge, Skills, and Abilities: APQP and FMEA methodologies Six Sigma Green Belt Understand & apply Block Diagrams, Interface Matrices, Parameter Diagrams, FMEA's, DVP&R, 8Ds, & control plans Ability to work in a matrix/cross-functional environment Other: Able to travel up to 15% - domestically and internationally Preferred Qualifications Education/Certifications: ASQ CQE or CQA Experience: Electromechanical and manufacturing operations experience; experience with global suppliers Knowledge, Skills, and Abilities: Strong knowledge of Advanced Product Quality Planning process Six Sigma Black belt preferred Working Knowledge and Application of Lean Manufacturing, DFM, Kaizen, Value Stream Mapping, Total Cost of Ownership, Outsourcing/Off-Shoring, Suppler Diversity & Sustainability/Regulatory compliance Ability to implement Statistical Process Control Ability to work in a matrix/cross-functional environment The pay range for this position is $73,000.00 - $137,800.00; base pay offered may vary depending on a number of factors including, but not limited to, the position offered, location, education, training, and/or experience. In addition to base pay, also offered is a comprehensive benefits package and 401k contribution (all benefits are subject to eligibility requirements). This position is eligible for participation in a short-term incentive plan subject to the terms of the applicable plans and policies. Chamberlain Group wants all of its employees to succeed and encourages people of all backgrounds to apply. We're proud to be an Equal Opportunity Employer, and you'll be considered for this role regardless of race, color, religion, sex, national origin, age, sexual orientation, ancestry; marital, disabled or veteran status. We're committed to fostering an environment where people of all lived experiences feel welcome. Persons with disabilities who anticipate needing accommodations for any part of the application process may contact, in confidence **************************. NOTE: Staffing agencies, headhunters, recruiters, and/or placement agencies, please do not contact our hiring managers directly.

Quality Technician III BH Job ID: 3485 SF Job Req ID: 15971 Ingersoll Rand is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, ancestry, color, family or medical care leave, gender identity or expression, genetic information, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran status, race, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable laws, regulations and ordinances. Job Title : Quality Technician Location : Alsip, IL (on-site) About Us Imagine a company with technology leadership of over 160 years, yet it operates with the energy of a startup. Ingersoll Rand has dedicated itself to Making Life Better for its employees, customers, shareholders, and planets. We produce innovative and mission-critical flow creation and life science technologies - from compressors to precision handling of liquids, gasses, and powers - to increase industrial productivity, efficiency, and sustainability. Supported by over 80+ brands, our products are used in various end-markets including life sciences, food and beverage, clean energy, industrial manufacturing , infrastructure, and more. Across the globe, we're driving growth with an entrepreneurial spirit and ownership mindset. Learn more at irco.com and join us to own your future. Job Overview: Put your hands-on Quality Technician and CMM operation experience to work with Ingersoll Rand, a global leader in industrial innovation. We're seeking a skilled Quality Technician to support our IRP, MP Pump, and Oberdorfer Pump (MPOB) Business Unit, contributing directly to product excellence and continuous improvement. In this role, you'll use your practical manufacturing experience and strong working knowledge of quality processes to drive high-standard outcomes. Your ability to operate a CMM and run existing programs, combined with experience in gauging, calibration , and evaluation techniques, will be key to maintaining world-class quality. Exposure to PPAP documentation and a general familiarity with ISO procedures will set you up for success. If you're detail-oriented, passionate about improving product quality , and motivated by measurable results, this is your opportunity to make an impact. Ready to bring your expertise to a company where innovation and quality go hand in hand? Join us and help shape the future of manufacturing excellence. Responsibilities: * Participate in internal and external audits , including ISO certification, customer audits , and project-specific quality requirements. * Help maintain and execute internal gauge calibration programs and monitor metrology lab efficiency. * Support inspection, testing, and recording for product development projects. * Drive supplier continuous improvement through problem-solving , Root Cause & Corrective Actions , and report card communication. * Train team members in problem-solving techniques and quality processes , including SWI and 5 Whys. * Model conscious leadership and apply company values in daily work and continuous improvement activities. * Monitor supplier and finished goods quality performance, track costs of inferior quality , and implement corrective actions. Requirements: * High School Diploma or GED * 5+ years of experience in quality management, including quality processes , inspection methods , and evaluation techniques. * 3+ years of experience in a manufacturing environment using precision measuring tools such as optical comparators , calipers , micrometers , microscopes , and other inspection devices. * 2+ years of experience operating a CMM , including executing existing programs * 2+ years of experience with PPAP documentation and submission processes, with working knowledge of ISO procedures. * 2+ years of experience applying problem-solving and facilitation skills to identify root causes and drive effective resolutions. Core Competencies: * Customer-Centric Mindset: Prioritizes customer needs while actively identifying opportunities to improve product quality and overall experience. * Analytical & Quality Evaluation Skills: Applies data-driven thinking to solve problems, supported by deep knowledge of quality processes , inspection methods , and evaluation techniques. * Technical & Computer Proficiency: Comfortable using conventional measuring equipment and experienced in Microsoft Excel and Word for documentation, reporting, and data organization. * Communication & Supplier Engagement: Clearly articulates ideas, collaborates with stakeholders with confidence and diplomacy, and maintains an engaging, professional presence when working with a motivated supplier base. * Adaptability: Remains flexible in changing environments, adjusting priorities based on evolving needs, quality findings, and business objectives. * Technical Savvy: Quickly learns new systems and product details, demonstrating an aptitude for understanding complex equipment, processes, and operational requirements. Preferences: * Basic understanding of assembly methods. * Basic understanding of blueprints and other documents that define product specification. * Basic understanding of root cause analysis (5W1H, 5 Whys , Fishbone , etc.) * ISO Internal Audit Travel and Work Arrangements * This position is fully based onsite in Alsip, Il * Anticipated travel is under 5% Pay Range : The base pay range for this role is $65,000 - $95,000. The pay range considers a wide range of factors that include a candidate's skills; experience and training; licensure and certifications; and geographic location. What We Offer At Ingersoll Rand, we embrace a culture of personal ownership - taking responsibility for our company, our communities, and our environment, as well as our individual health and well-being. Our comprehensive benefits package is designed to empower you with the tools and support necessary to take charge of your health, ensuring that together, we can continue to make life better. Our range of benefits includes health care options like medical and prescription plans, dental and vision coverage, as well as wellness programs. Additionally, we provide life insurance, a robust 401(k) plan, paid time off, and even an employee stock grant, among other offerings. These benefits are our commitment to you, so you can be your best at work and beyond. Ingersoll Rand Inc. (NYSE:IR), driven by an entrepreneurial spirit and ownership mindset, is dedicated to helping make life better for our employees, customers and communities. Customers lean on us for our technology-driven excellence in mission-critical flow creation and industrial solutions across 40+ respected brands where our products and services excel in the most complex and harsh conditions. Our employees develop customers for life through their daily commitment to expertise, productivity and efficiency. For more information, visit ************

Job Description C&L Supreme is looking for a quality person to run the quality department. This position will be in charge of all quality aspects. In charge of the QMS and maintaining the ISO certification for the company. We offer vacation, 401k, health and dental insurance available. If you are looking for a career at a company that respects its most valuable asset , the employee. A company that invests in continuing education for its employee. The company is looking for the following: Signing Bonus of $600 for qualified candidates Education Req.: High School Diploma or equivalent GED. Proficient with GD&T, geometry and trigonometry (shop math). Vocational technical program certificate preferred. Min. Qualifications: Proficient in reading, understanding and interpreting specifications, blue prints, drawings, test procedures, work instructions, and other applicable production/inspection documentation. Must have a working knowledge of inspection techniques, tools, equipment such as gauges, meters, calipers, micrometers. Must be able to perform visual and dimensional inspections of in process and finished work. Strong verbal and written communication skills. Demonstrated analytical skills and attention to details. Experience Req.: Minimum three (3) years experience in a QC Inspector role in a manufacturing environment. Ability to read and interpret charts, graphs, technical procedures, blueprints and engineering drawings with close attention to detail. Working knowledge of quality control methods and techniques such as first article, in-process and final assembly inspections, manufacturing processes, testing procedures and analyzing information to document results in detail. Computer experience utilizing MS Word and/or ERP system. Primary Functions and responsibilities: QUALITY INSPECTIONS: · Read and interpret blueprints, schematics, diagrams and engineering specification sheets to obtain product information such as specified materials, cosmetic requirements and dimensions. · Verifies conformity of finished products by confirming specifications; conducting visual and measurement tests; returning products for re-work; confirming re-work · Verifies conformity of first piece by conforming specifications; conducting visual and measurement test; returning products for re-work; confirming re-work · Verifies products going to outside service by confirming specifications; conducting visual and measurement tests; returning products for re-work; confirming re-work · Accurately perform and complete First Article inspection reports and Non-conformance reports · Inspects production components and subassemblies for conformance to predetermined standards, specifications, tolerance and quality procedures. · Verifies conformity in-process production by confirming specifications; conducting visual and measurement tests; communicating required adjustments to production supervision. · Documents inspection results by completing reports and logs; summarizing re-work and waste; inputting data into quality database (log in in E2; KPIs logs etc.) · Will document results of all inspection findings and results including detailed descriptions/discrepancies and monitor corrective actions to inspection findings · Performs complex and critical inspection procedures requiring special set-up of new or unique equipment and interpretation of test data from a variety of sources. · Perform line, in-process, subassembly, shipping and receiving inspections as needed. MEASUREMENT EQUIPMENT: · Keeps measurement equipment operating by following operating instructions; · Perform routine quality audits of controlled manufacturing area for material identification, traceability, equipment calibration, etc and prepare reports under the direction of Quality Manager and document results. · Ensure calibration and maintenance is performed on inspection equipment. OTHER: · Accomplishes quality and organizational mission by completing related results as needed. · Adapts to changes in the work environment, manages competing demands, changes approach or methods to best fit the situation, able to deal with frequent change, delays, or unexpected events. · Build and promote effective working relationships with cross-functional groups. · Other tasks and responsibilities as assigned. Physical Demands 20/20 vision with or without correction, use of hands 100% of the time, stand, bend, stoop, twist, turn. Must occasionally lift and/or move up to 25lbs.

Avery Dennison Corporation (NYSE: AVY) is a global materials science and digital identification solutions company. We are Making Possible™ products and solutions that help advance the industries we serve, providing branding and information solutions that optimize labor and supply chain efficiency, reduce waste, advance sustainability, circularity and transparency, and better connect brands and consumers. We design and develop labeling and functional materials, radio-frequency identification (RFID) inlays and tags, software applications that connect the physical and digital, and offerings that enhance branded packaging and carry or display information that improves the customer experience. Serving industries worldwide - including home and personal care, apparel, general retail, e-commerce, logistics, food and grocery, pharmaceuticals and automotive - we employ approximately 35,000 employees in more than 50 countries. Our reported sales in 2024 were $8.8 billion. Learn more at ********************** At Avery Dennison, some of the great benefits we provide are: Health & wellness benefits starting on day 1 of employment Paid parental leave 401K eligibility Tuition reimbursement Employee Assistance Program eligibility / Health Advocate Paid vacation and paid holidays Job Description Conduct product performance testing and characterization as well as possess expertise in a testing area or material component to help establish test methods and provide analysis and direction for project teams. In this role, you will work 2nd Shift, 12pm-8:30pm. Primary Job Duties and Responsibilities: Activities and duties may vary depending on specific needs. Essential functions may include, but are not limited to: • Tests and inspects products at various stages of the production process in compliance with all applicable test methods (product age testing) • Conduct maintenance, calibration, and cleaning of laboratory equipment. • Sets up test apparatus and conducts tests units following methods, procedures, standards, and sequences. • Understand and implement ISO 9001 procedures. Testing & Research • Conduct developmental tests for new and/or modified products or product components. • Conduct lab testing in support of project management, customer response, and process technology. • Perform a wide variety of laboratory tests and/or research on raw materials and finished products. • Duties usually consist of making test batches, conducting measurements, and performing quantitative and qualitative analytical tests. • May participate in the development, maintenance, and refinement of internal quality control and reliability programs. • Operate analytical equipment (e.g., Retro reflectometer, release tester, colorimeter, instron, shear tester, viscometer, etc.) • Special testing and projects as directed • Perform other duties as assigned by manager Observing, Recordkeeping & Evaluating • Makes and records observations; performs calculations, analyzes data, and collects and prepares data for evaluation. • Interprets analytical results, draws conclusions and theories, and communicates the impact of product performance. • Delivers timely and accurate analytical results for the purposes of supporting production, research projects, testing, troubleshooting, and resolving customer complaints. • Makes recommendations regarding improvements to test methodology. • Performs technical and record-keeping duties in conformance with company and regulatory policies and standards to meet quality and accuracy requirements. • Entering of data into various spreadsheets and databases (QIS, MFGPro) • Input/update all systems with details, results, and product specs. • Update quality systems to show the status of conforming / non-conforming materials. • Ensure adherence to operating standards to ensure safe work practices, maximize productivity and minimize scrap and machine downtime • Recommend, support, and implement improvements to quality initiatives • Ensure safety and housekeeping efforts are supported Qualifications • High School Diploma or GED. Associate's Degree or Technician Certification a plus. • Able to lift up to 50 pounds. • 1 - 2 years related experience. • Proficiency with various types of procedures and analytical equipment (e.g., Retro reflectometer, release tester, colorimeter, instron, shear tester, photometer, viscometer, etc.). • Proficiency using computer systems, such as Microsoft Office, Lotus Notes, QIS and function-specific software. • Strong analytical and problem-solving skills. • Good verbal and written skills. • Skilled in interfacing effectively with cross-functional groups to define and execute overall requirements. • Actively seeks knowledge, skills, and experience in order to grow and develop Additional Information All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, protected veteran status, or other protected status. EEOE/M/F/Vet/Disabled. All your information will be kept confidential according to EEO guidelines. Reasonable Accommodations Notice If you require accommodations to view or apply for a job, alternative methods are available to submit an application. Please contact ************** or ********************************** to discuss reasonable accommodations.

Dynamic Manufacturing, Inc. has an exciting opening for a motivated Quality Technician to join our team! A successful Quality Technician will be mechanically inclined, display a continuous improvement mindset, and ideally have experience in a manufacturing or aerospace environment. At Dynamic Manufacturing, we offer: An Engaging Work Environment Opportunities for Advancement Tuition Reimbursement Competitive Pay (we pay weekly!) Comprehensive Benefits Package & 401(k) Match Generous Paid Time Off, and more! Responsibilities: Write and revise Job Instructions, Control Plans, Quality Alerts, Support Documents, or other documents as required and process ECIs accordingly. Review training records of Job Instructions, Control Plans, Quality Alerts, Support Documents, or other documents as required. Perform PPAP Audits and assist with PPAP activities. Update 3 Panel Charts - Root Cause for weekly Quality meetings. Create monthly Warranty Charts to present to customer. Work with Production, Calibration and Engineering Team members to address fixturing and inspection gaging issues. Perform weekly LPAs (Layered Process Audits) and maintain reports. Assist with Containment, sorting and receiving inspection activities as required. Be a problem first responder and assist with resolving production issues, determine Root Cause and disposition nonconforming products. Interface with CMM Inspection Lab and Teardown and Sediment Labs as necessary to resolve issues. Use QAD to determine stock locations and quantities for suspect material and other activity, as necessary. Perform inspections with Calipers, Micrometers, or other devices, as necessary. Visual Factory maintenance, daily Torque and Masters checks. Ensure compliance and assist with adherence to the Quality Management system (IATF16949/ISO9001). Qualifications: 1-2 years experience in a related field Working knowledge of Excel and Word. Ability to learn Access, Teams, OneNote and QAD. Familiarity with IATF16949 or other quality systems desirable. Manufacturing experience as a quality inspector or quality technician preferred. Able to perform basic mathematical calculations. Strong written and verbal communication skills. Spanish as a second language a plus. Ability to work in shop floor environment & be able lift 50 lbs. The above statements are intended to describe the general nature and level of the work being performed in this job. This is not an exhaustive list of all duties and responsibilities. The management of Dynamic Manufacturing, Inc. reserves the right to amend and change responsibilities to meet business and organizational needs. WHY CHOOSE DYNAMIC? Dynamic Manufacturing is a family owned and operated organization formed in 1955 by John Partipilo. Our organization specializes in the manufacture of automotive, off-road, industrial and racing powertrain products. This includes Torque Converters, Transmissions (Automatic, Manual, Hybrid models) and Transfer Case Assemblies. Our organization started with a single retail facility and a dream. Today, we serve the aftermarket and several OE customers. Our operations consist of almost a million square feet of floor space and 1,000+ extremely talented employees encompassing turnkey operations from engineering, total machining operations, through assembly and dynamometer testing. We are an equal opportunity employer and prohibit discrimination/harassment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. 2nd shift 3:00pm-11:30pm

Job Code 775 # of Openings 1 Apply Now Epstein is a well-respected 100+ year old Architecture, Engineering and Construction firm. The firm is headquartered in Chicago, with offices in New York, Raleigh and Warsaw, Poland. Our beautiful corporate office is located in Chicago's West Loop, convenient to transportation. We offer all employees a competitive wage and benefits package. Epstein is proud to be 100% employee owned. Epstein focuses on our community through our emphasis on community service, green initiatives and sustainable design delivering "best in class" creative project solutions. Overview Are you passionate about engineering solutions that transform industries? Epstein is seeking a talented Engineer to join our Industrial Process Engineering group. As a key member of our dynamic team, you will drive the development of creative and effective solutions for a diverse range of clients, with a primary focus on industrial food processing and consumer packaged goods. From process flow diagrams to equipment selection, your expertise will play a pivotal role in delivering "best in class" solutions that exceed client expectations. General Responsibilities * Lead or assist in Master Planning and design activities for food processing and industrial process lines. * Develop process flow diagrams, equipment lists, and utility estimates to guide project execution. * Prepare comprehensive equipment bid packages, including drawings, specifications, and performance criteria. * Collaborate with equipment vendors to gather essential utility and process information required by other disciplines. * Coordinate process utility design with equipment specifications and other building design disciplines. * Manage the shop drawing process for process-related equipment and oversee equipment procurement and installation. * Support construction administration activities, including equipment start-up and commissioning. Requirements * Bachelor's Degree in Engineering or related field. * 3-7 years of experience in consumer products, food, or finished goods manufacturing. Experience with fresh meat processing systems will be considered favorably. * Proficiency in analyzing interrelationships between different design elements. * Strong analytical skills and knowledge of relevant analysis methods. * Excellent interpersonal and communication skills, with a collaborative mindset. Why Join Us? * Exciting Challenges: Take on diverse projects that push the boundaries of innovation in food processing and consumer packaged goods. * Professional Growth: Develop your leadership skills and technical expertise in a supportive environment that values continuous learning and career advancement. * Community Impact: Contribute to sustainable design initiatives and community service projects that make a difference. * Employee Ownership: Become part of a 100% employee-owned firm where your contributions directly shape our success and future. Epstein offers a comprehensive benefit package including medical, dental, vision, life, disability and accident insurance, flexible benefit plans, transportation benefits, employee assistance plan and parental leave. We help secure our employees' future retirement through our 401k and Employee Stock Ownership Plan. To support a healthy work-life balance, we provide half-day Fridays, flexible working hours, a hybrid work schedule, paid time off and paid holidays. Additionally, we encourage career growth by offering professional license reimbursement, industry association reimbursement, an internal training program, leadership development program and educational assistance. Individual compensation is determined by several factors, including relevant education, experience and training, qualifications, skill sets, licensure/certifications and location. Employees are also eligible for discretionary annual bonuses based on both company and individual performance. The salary range for this position is $85,000-$120,000 annually. Epstein is an Equal Opportunity Employer. It is our policy to provide a fair and equal employment opportunity to all persons, regardless of age, race, color, religion, gender, sexual orientation, physical or mental disability, national origin, citizenship, veteran status, marital status, genetics, gender identity, transgender status, or on the basis of personal favoritism or other non-merit factors. Epstein hires and promotes individuals solely on the basis of a person's qualifications. Epstein is a VEVRAA Federal Contractor. To learn more about Epstein, please go to our website ********************** Back Email Apply Now

The Quality Technician plays a critical role in ensuring products meet customer requirements, internal quality standards, and regulatory expectations in a contract manufacturing environment. This position performs inspections, testing, and documentation to validate materials, components, and finished products while supporting continuous improvement initiatives and corrective action processes. Duties/Responsibilities: Inspection & Testing * Inspect parts using a variety of measurement tools including calipers, micrometers, height gauges, indicators, and CMM (if applicable). * Identify nonconforming material and initiate containment activities as necessary. Continuous improvement * Support and implement lean manufacturing principles * Conduct 5S improvements Documentation & Records * Accurately complete inspection records, control charts, and quality documentation. * Maintain traceability and documentation in accordance with customer, internal, and regulatory requirements. * Support document control efforts for work instructions, procedures, and inspection criteria. Problem Solving & Corrective Actions * Assist in root cause analysis and corrective/preventive action (CAPA) activities. * Participate in investigations related to internal and customer quality issues. * Support continuous improvement projects focused on defect reduction and process improvement. Supplier & Customer Support * Assist with supplier quality issues including incoming inspection and communication. * Support customer returns (RMA) and complaint investigations. * Prepare quality reports as needed to communicate inspection results and trends. Compliance & Quality Systems * Support adherence to ISO, AS, or customer-specific quality system requirements. * Participate in internal audits and audit preparation efforts when required. * Follow all safety and quality policies and procedures. Required Skills/Abilities: * Ability to read and interpret engineering drawings and specifications. * Proficiency with hand inspection tools (calipers, micrometers, indicators). * Familiarity with GD&T and blueprint interpretation. * Basic computer skills (Microsoft Excel, ERP systems, quality software). * Strong attention to detail and organizational skills. * Experience with CMM or advanced metrology equipment preferred. * Knowledge of ISO 9001 / AS9100 standards. Education and Experience: * High school diploma or equivalent. * 2 - 4 years of experience in quality inspection or manufacturing environment. * Experience in manufacturing, machining, or assembly operations. * Associate degree or technical certification in Quality, Engineering, or Manufacturing preferred. * Experience with CMM or advanced metrology equipment preferred. Physical Requirements: While performing the duties of this job, the employee is regularly required to stand, walk, use hands and fingers, feel/reach with hands/arms, talk and hear. The employee frequently is required to sit and walk. The employee is occasionally required to bend and stop, push and pull, reach above shoulder level, kneel, squat, or crouch. The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job to include close vision, distance vision, peripheral vision, depth perception, and the ability to adjust focus. While performing the duties of this job, the employee is exposed to moving mechanical parts and fumes or airborne particles. The noise level in the work environment is usually moderate.

Responsibilities will include: Oversee development and implementation of company safety & quality management system Develop and implement a quality plan to meet quality levels established by company guidelines and local regulations Lead and facilitate the quality champion program to analyze and correct nonconformance and complaints Collaborate with engineering to review project readiness and the purchasing of a supplier management strategy Work with company team members and local regulators to establish inspection protocols and ensure compliance Analyze and resolve process quality issues and needs as they relate to process performance and quality requirements Provide data related to KPI's and identify opportunities for improvement Travel to suppliers to ensure quality and process capacities are met Strive to develop a feeling of pride and loyalty to company and team members Champion Affirmitive Action Program in hiring, development and promotion opportunities Become familiar with company policies and train subordinates to follow guidelines Strive to improve leadership and management capabilities for personal development Qualifications BS in Engineering, Quality, Business or rleated degree 6+ years in a manufacturing or construction environment implementing quality programs Strong organizational and problem solving skills Track record of implementing Lean Manufacturing methodologies and Continuous Improvement Strong written and verbal communication skills Leadership ability U.S. Citizen or Green Card holder Additional Information Perks: Established and growing company Competitive pay and benefits packages Plenty of career growth opportunities