Quality inspector jobs in Cherry Hill, NJ - 138 jobs

The Quality Inspector's role is to utilize curtainwall knowledge alongside 2D and 3D engineering / CAD drawings to identify potential quality and installation issues in curtainwall components or units. A Quality Inspector may be assigned work in different areas, depending on production requirements. All Quality Inspectors are required to abide by all applicable New Hudson Facade requirements, as outlined in the Employee Handbook. Quality Inspectors directly report to the Quality Supervisor. Role and Responsibilities: Inspect and approve curtainwall components or units at various points of the manufacturing process for compliance with curtainwall quality/cleanliness expectations. Inspect and test incoming materials (aluminum, glass, stone, machined parts, etc.) against drawings, procedures and other defined quality standards; enters inspection results in Epicor; maintains various inspection logs and spreadsheets; inspects completed curtain wall units and crating. Enters NCRs for discrepant materials as found after inspection; assists the QC Coordinator in tagging and managing rejected parts. Read and manipulate 2D / 3D engineering CAD drawings to determine if curtainwall units and its individual components are fabricated and installed correctly. Communicate with upstream quality / assembly personnel when quality issues are identified. Provide information that can support the quality of the completed curtainwall unit. Maintain inspection logs and spreadsheets, as needed. Utilize ADP / Epicor to track hours spent supporting projects. Comply with all safety standards and requirements defined by NHF. Care of all assigned tools (calipers, spectrophotometers, protractors, etc.). Other tasks as required by management. Skills and Abilities: Experience working in a heavy manufacturing or large-assembly environment. Ability to read and understand 2D engineering drawings. Familiarity with manipulating 3D engineering drawings on CAD software. Advanced knowledge and experience with measurement tools (Tape measure, caliper, protractor, etc). Ability to act with professionalism; ability to multitask. Ability to follow both written and verbal instruction. Communication skills (both written and verbal). Physical Requirements: Ability to move equipment weighing up to 50 pounds. Applicants must be able to perform repetitive lifting and other physically demanding tasks. Qualifications and Education Requirements: HS Diploma AS Degree or higher preferred. Experience in the curtainwall / construction industry preferred. New Hudson Facades is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex including sexual orientation and gender identity, national origin, disability, protected Veteran Status, or any other characteristic protected by applicable federal, state, or local law.

Job DescriptionJob Summary: Quality Inspector:Precision Machine Shop is seeking a dedicated and detail-oriented Quality Inspector to join our team. The Quality Inspector will be responsible for ensuring that our products meet the highest quality standards, from incoming raw materials, In-process assemblies, to finished goods. They will play a vital role in maintaining our reputation as a trusted manufacturer of precision metal products. Responsibilities: Quality Inspector: Conduct inspections on incoming raw materials, parts, sub-assemblies, and finished goods to ensure compliance with quality specifications and standards. Follow established inspection checklists, testing procedures, and documentation protocols. Perform visual inspections, measurements, and functional tests utilizing various tools. Identify and document non-conformities, defects, and discrepancies, and work closely with the production team to address and resolve issues promptly. Adhere to relevant quality standards, regulations, and industry best practices. Participate in internal quality audits and assist in the implementation of corrective and preventive actions. Provide timely and accurate inspection reports and documentation. Collaborate with cross-functional teams to drive continuous improvement initiatives related to quality control and assurance. Stay updated on industry trends, advancements, and regulatory changes related to quality assurance. Maintain a clean and organized work area, ensuring that all testing equipment is properly calibrated and maintained. Requirements: Quality Inspector High school diploma or equivalent; additional technical certifications or qualifications in quality assurance are preferred. Proven experience as a Quality Inspector, preferably in the metal fabrication or manufacturing industry Strong knowledge of quality control principles, methods, and techniques Proficient in using measurement tools and equipment such as calipers, micrometers, gauges, and CMM (Coordinate Measuring Machine) Excellent attention to detail with an ability to identify and document quality issues effectively. Familiar with reading and interpreting engineering drawings, specifications, and technical documentation Good communication skills, both written and verbal Ability to work independently and collaboratively within a team environment. Familiarity with ISO 9001 or other quality management systems is a plus. Knowledge of Lean Six Sigma methodologies is an added advantage. Onsite Personnel is an equal opportunity employer committed to hiring a diverse workforce in an inclusive culture environment. Onsite Personnel does not discriminate based on disability, veteran status or any other basis protected under federal, state, or local laws.

Job DescriptionDescription: Conduct Receiving, In-process and Final Inspections of Parts, Containers, Shelters, and Welded Structural Steel Fabricated Assemblies by performing Dimensional Inspection, VT, and NDE IAW AWS and Military Specifications. Perform wind, light, water leak, and paint performance tests. Witness electrical testing on all components. Sign each traveler line item as each task is performed and checked before movement to next process step to maintain traceability. Calibrate and Maintain TME and Manufacturing equipment. Complete Inspection Reports, and Sign Product Conformance Release Finished Product. Maintain Records of Acceptance to ISO9001 Standard. Report findings to supervisor. Job Summary: This position reports to the Quality Manager. The ideal candidate possesses a basic understanding of manufacturing, fabrication, assembly, and welding processes of Structural Steel Products. Ability to read different types of schematic drawings. Ability to use basic inspection equipment, prepare and write inspection reports. Responsibilities: · Accident prevention - actively identify, correct and/or report safety hazards to prevent accidents. · Actively identify and pursue cost reduction and efficiency/profit improvement opportunities. · Support the ISO 9001 Quality Management System and the Sea Box Quality Policy calling for self-inspection of your work product. · Determines quality and reliability standards by studying drawings and formulas; verifying specifications with engineering staff. · Perform NDE of Welds and Welding Processes IAW AWS, Military, and Customer Specifications. · Identifies raw material condition by inspecting materials samples; conducting inspections and physical tests of materials. · Identifies in-process product condition by inspecting samples during productions process; conducting in-process inspections and physical tests. · Determines disposition of finished products by collecting, classifying, analyzing, and interpreting production and quality data; determine product acceptability in comparison to specifications. · Determines acceptability or rework by conducting inspections and physical tests of reworked product. · Documents finished product status by recording and summarizing raw materials, in-process, and finished-product inspection and physical test data; updating quality assurance data based. · Maintains quality assurance operations by following quality assurance policies and procedures; reporting needed changes. · Contributes to team effort by accomplishing related results as needed. · Perform precision inspection with equipment such as calipers, micrometers, depth gauges, plug gauges and comparator · Performs other duties as assigned · Must be able to fulfill essential job function in a consistent state of alertness and safe manner. Why work for Sea Box? We offer benefits to our full-time employees that include: Health Insurance Dental Insurance Vision Insurance Basic and Voluntary Life Long-Term Disability Flexible Spending Accounts Employee Assistance Program Paid Time Off Paid Holidays, Bereavement, Jury Duty 401(k) with company match Employee Referral Program Employees are eligible for most benefits on the 1st of the month following date of hire. Salary Range: $40,000 - $55,000 Location: This position is onsite (non-remote) at the Company's corporate headquarters in Cinnaminson, NJ. This position may occasionally require working overtime and/or working outside of the Company's normal 8:30am - 5:30pm hours of operation. Requirements: Experience: 3-5 years' work related experience. Education: High school diploma or equivalent. ASQ or AWS Certifications helpful.

The Quality Technician in microbiology aseptic processes ensures products meet microbiological standards and are manufactured in a sterile environment. This role monitors quality assurance standards and encourages the team to consistently deliver excellent results. The Quality Technician is responsible for executing best practices, goals, and established standards for the team. Primary Responsibilities * Perform tests to identify harmful microorganisms, maintain a sterile environment, and ensure regulatory compliance * Document and analyze test results following good laboratory practices for microbiology and quality control laboratories * Identify and address production issues, contributing to corrective action * Inspect work daily, maintain cleanliness, organize supplies, and assemble sterile products using aseptic technique * Handle biohazard spills, train new hires, and demonstrate the use of cleaning chemicals * Uphold quality standards, follow GFSI, HACCP, and GMP guidelines, and participate in food safety inspections * Support sanitation operations, monitor performance, and provide report * Address customer complaints, conduct audits, and contribute to quality assurance improvements * Promote continual improvement and collaborate on cross-functional projects * Perform routine environmental monitoring within cleanrooms and production areas to detect microbial contamination * Conduct microbiological assays on raw materials, in-process samples, and finished products using various techniques * Accurately record and interpret test results, maintaining detailed documentation of activities, including deviations, investigations, and corrective actions * Participate in investigations for out-of-specification (OOS) results, deviations, and complaints related to microbiology testing * Ensure proper calibration and maintenance of laboratory equipment used for microbiological analysis and QC testing Prior Knowledge/Experience * Bachelor's Degree in Microbiology, Biology, or related field * 1-3 years of experience in quality; food processing experience preferred * Strong understanding of aseptic techniques and microbiology principles * Experience with various microbiological testing methods, including plate counting, membrane filtration, and rapid microbial detection * Proficiency in data analysis, documentation, and recordkeeping * Excellent attention to detail; ability to work independently and in team environments * Familiarity with GMP regulations and quality systems * Ability to utilize provided PPE - safety glasses, ear plugs/muffs, bump caps, dust masks, company uniform, safety shoes * Ability to be respirator certified if required * Physical ability to sit, stand, walk, climb, stoop for up to 8 hours; lift 55 lbs consistently; lift/hold objects overhead for extended periods * Ability to climb and work on a 40-foot extension ladder for extended periods as needed; work at heights up to 50 feet * Ability to maneuver and work in confined areas with variations in temperature, humidity, and air quality The following common allergens are processed in our facilities: wheat, eggs, dairy, and soy. Looking for a Career for Good? We offer a competitive compensation and benefit package, designed to promote a Happier, Healthier You which includes: Compensation: * Compensation for this role is hourly and will be based on your experience, skills, and location, with a typical range between $24.69/HR and $30.87/HR. * This role is eligible for a targeted annual bonus equal to $3500. Final bonus payouts are determined by both individual and company performance. Benefits: * Medical coverage starts the first of the month-no waiting period * Immediate 401(k) eligibility with fully vested matching contributions * Over 5 weeks of paid time off in your first year * Free life coaching, onsite health exams, and 24/7 access to Registered Nurses * Lifestyle Spending Account #LI-DNI Apply now * Apply Now * Start applying with LinkedIn

MAJOR JOB DUTIES AND RESPONSIBILITIES (List in order of importance) Complies with company policies, procedures, work instructions and training requirements. Positively Influences peers and other line-level personnel to comply and adhere to applicable requirements. Carries out responsibilities in compliance with the Quality Manual and applicable regulations (cGMP, MDD and GDPMDS). Performs attribute inspection activities to determine acceptability of kit, components, and/or shipped packages; documents the results. Sends kit back to production team or manually corrects kit when errors are discovered; documents and tracks any errors. Performs batch record review for conformance to Good Documentation Practices. Performs assembly lot review and forwards documentation to Supervisor/Manager. Physically demarcates, stages, packs and/or palletizes accepted kits/shipped orders. Assists in the maintenance of an organized production environment, free of distractions and debris. Performs other duties as assigned.

Job Description Quality Inspector Fastener Dimensions, Inc. Pennsauken, NJ $22 to $28 per hour - based on experience Full Time - 8:30 AM to 5:30 PM 6 Paid Holidays PTO, 401K, Sick Time Medical, Dental, Vision & Life Insurance, Short/long-term Disability Fastener Dimensions Inc. (FDI) is a family-owned, high-strength fastener manufacturer, with more than 30 years of experience supplying customers within the Aerospace & Defense industries. We have been growing at an aggressive pace and are looking to grow our team! Our Quality team is currently seeking a Quality Inspector to join us at our headquarters in Pennsauken. The primary responsibilities for this position include: performing assigned test/inspection, calibration and product verification activities in accordance with the prescribed procedures/instructions and documenting the results of these activities in accordance with our quality management system requirements. The success of Fastener Dimensions is determined by our success in operating as a unified team. Every job is essential to fulfilling our mission to the people who trust and respect us. This individual will have a strong work ethic, knowledge of quality principles, a willingness to learn, and love learning new aspects of the high-strength fastener industry. Our ability to supply our customers with world-class products and service is our competitive advantage, and the individual filling this position must reflect the values and culture of our business. This position reports to the Director of Quality Room for upward growth Our state-of-the-art facility, in NJ, enables us to produce some of the most complicated parts found on the market today. Key roles: Perform test/inspection activities at prescribed intervals and frequencies, in accordance with provided instructions. Document results of test/inspection activities in accordance with applicable procedures/instructions. Identify and segregate nonconforming products in accordance with QMS procedure. Prepare and assemble documentation for First Article Inspection. Assist with final inspection and receiving inspections. Perform first and in-process inspections. Education, Experience, Skills & Abilities: Experience in Manufacturing Industry (Aerospace, Automotive, or Medical): Minium 3 years Strong attention to detail, and a high level of accuracy in handling critical documents. Ability to read and understand blueprint/engineering drawings. Understanding and working knowledge of GD&T. Experience reading and understanding customer specifications. Proficient at test/inspection techniques and methods. Proficient in various inspection equipment, including an optical comparator. Experience with hand gage calibration. Working knowledge of ISO-9001:2015, AS9100D, and/or API Q1. Strong communication skills - verbal & written. Critical thinker, strong problem-solving skills Team player / ability to work well in a team environment. Proficient in SmartCerts and Quantum documentation systems is a plus. Proficient in Microsoft Office. Company DescriptionManufacturer with more than 30 years of experience in the Aerospace supply chain. Our facility in Pennsauken is set up to manufacture AN, MS, NAS and OEM bolts to print.Company DescriptionManufacturer with more than 30 years of experience in the Aerospace supply chain.\r Our facility in Pennsauken is set up to manufacture AN, MS, NAS and OEM bolts to print.

Job DescriptionQuality Control Inspector - Level III The Level III Inspector is responsible for performing complex first article, in-process, and final inspections to ensure that precision machined components, assemblies, and products meet all customer and company quality standards. Work involves inspection of diversified, tight-tolerance parts for industries such as aerospace, medical, defense, and semiconductor manufacturing. Responsibilities may also include supplier audits and qualification activities. This position requires extensive hands-on experience with precision machining processes, engineering drawings/blueprints, and Geometric Dimensioning and Tolerancing (GD&T). The Level III Inspector develops inspection procedures, designs specialized gauging or measurement setups, and uses a range of precision and electronic measuring instruments. The role also includes programming and setup of Coordinate Measuring Machines (CMMs) and OGP vision systems, as well as training other inspectors in their use. Primary Responsibilities Verify that precision machined parts and assemblies meet all customer and internal specifications for quality and conformance. Accurately document all inspections and verifications through signatures, stamps, or electronic records. Review and confirm the completeness and accuracy of supplier certifications. Lead quality initiatives for assigned customers and support general quality efforts across all programs. Mentor and train Level I and Level II inspectors on inspection techniques, control plans, and FAI (First Article Inspection) reporting. Serve as the primary trainer for CMM and OGP vision system programming and operation. Promote and maintain a safe, organized, and 5S-compliant work environment. Support workload management within the inspection area to ensure efficiency and accuracy. Perform additional duties as directed by management. Knowledge and Skill Requirements Extensive experience inspecting precision machined components and tight-tolerance mechanical parts. Thorough understanding of engineering drawings, blueprints, and GD&T, with the ability to interpret and train others in these standards. Strong knowledge of both English and Metric measurement systems. Proficiency with statistical tools and variance analysis. Skilled in the use of precision measuring instruments and electronic devices (micrometers, height gages, surface plates, comparators, CMMs, OGP systems, etc.). Ability to interpret customer specifications, national standards, and technical documentation. Strong communication, mentoring, and collaboration skills with the ability to work effectively with employees, management, and customers. Physical Requirements Annual eye examination and one-time Ishihara (Color Blindness) Test required from an accredited eye care professional. Working Conditions Standard manufacturing and inspection environment. May require light lifting, standing, walking, and sitting for extended periods. Occasional local travel and weekend work may be required

We are currently accepting applications for a Quality Inspector. As Quality Inspector, you will work closely with our production staff, and provide guidance for meeting ISO 9001, AS9100, and ISO 13485 quality standards. In this role, you will examine raw materials, springs, wire forms, and metal parts for surface and physical defects. You will provide inspections at specified stages in the production process, and test for a variety of qualities including dimensions, performance, and mechanical characteristics. Qualifications High School diploma or equivalent is required, two-year degree in related discipline or vo-tech training preferred. Three to five years of experience in Quality Control function in manufacturing environment Ability to use measuring tools such as standard (non-digital) micrometers, calipers, gauges Ability to perform multiple tasks in a fast-paced environment to assure delivery requirements Clear oral and written skills, and excellent interpersonal communication skills Ability to keep accurate records and pay attention to detail Ability to follow documented procedures and standards Proficiency in data entry and Microsoft Excel Excellent time-management skills, with the ability to work independently with little supervision. Additional information We offer a very competitive salary, potential for a yearly performance bonus, excellent benefits including paid vacation, health, life, AD&D, STD/LTD options, and a 401(k) plan. John Evans' Sons, Inc. is an EOE/AA /Veterans preference employer and welcomes all applicants. Please send your resume and salary requirements to: John Evans' Sons, Incorporated Attn: Human Resources Manager P.O. Box 885 Lansdale PA 19446-0885 Company DescriptionJohn Evans' Sons LLC manufactures a wide array of precision engineered springs and dynamic small assemblies for brand name commercial and industrial customers across the globe. Home windows, surgical robots, aircraft carriers - and your local grocery store - are just a few of the places where our products can be found. John Evans' Sons is America's Oldest Springmaker (Est. 1850), and we are dedicated to outstanding customer service and advancing our state-of-the-art technology.Company DescriptionJohn Evans' Sons LLC manufactures a wide array of precision engineered springs and dynamic small assemblies for brand name commercial and industrial customers across the globe. Home windows, surgical robots, aircraft carriers - and your local grocery store - are just a few of the places where our products can be found. John Evans' Sons is America's Oldest Springmaker (Est. 1850), and we are dedicated to outstanding customer service and advancing our state-of-the-art technology.

Job Description The Quality Technician's role will be seen as pivotal in our efforts to drive at-source quality at ALMAG. The role requires the individual to support new product introduction, provide quality training, support, and to work collaboratively with various teams to develop standard work and ensure compliance. DUTIES AND RESPONSIBILITIES The quality technician's primary responsibility is to positively support the various departments in assuring that the requirements of the customer and quality management system are being met throughout each department. Additionally, the quality technician contributes to the continuous improvement of Almag's quality system. The duties and responsibilities of the Quality Technician are detailed below, but not limited to the following: Supporting the New Product Introduction process by assuring new customer requirements are understood and achieved. Responsible for performing audits of various departments to ensure that the QMS requirements are being met. Communicate new product status, its performance based on data, and provide samples and feedback to the respective departments with continuous improvement approach in mind. Responsible for collecting samples as required for various customer and internal requirements. Responsible for tracking and supporting Quality Containment processes for nonconforming product in all departments. Responsible for supporting production team in achieving customer requirements through training, auditing, and development of standard documents. Provide direction and support to any special sorting if needed, with the focus on accuracy and efficiency of sorting. Perform product testing for mechanical properties. Support team lead and shift supervisors to determine criteria for acceptance or rejection when there is uncertainty. Provide direction to the team if clarification is required for WO notes or requirements. Perform other related duties as assigned. Requirements MINIMUM QUALIFICATIONS Education/Experience At least 3 years' experience in quality, working in manufacturing environment. ASQ Certified Quality Technician (CQT) would be an asset. Certified Internal Auditor would be an asset. Technical Skills/Competence Excellent teamwork and collaboration across departments and within teams Work Efficiently Flexibility/Adaptability to meet customer business requirements. Communicate clearly and effectively, verbally and in writing. Must be able to read and understand engineering drawings. Basic knowledge of GD&T would be an asset. Ability to work and make decisions independently. Good mechanical aptitude and attention detail. Must be competent in the use of measuring instruments i.e. Calipers, micrometers. Basic proficiency with MS-office (Excel, Word, PowerPoint). Fork Lift Certified Benefits Profit Sharing Education Assistance Program Social Events Safety Shoe and Glasses Allowance Internal Growth and Development Health and Dental Life and AD&D Vision Critical Illness Insurance Long Term Disability

SP Industries Inc. is expanding our team in Vineland, NJ and have an immediate opening for a Quality Inspector - NMR. In this role, the right candidate will be responsible for ensuring that all NMR components and assemblies meet strict quality standards and specifications. This includes dimensional checks, visual inspections, and functional verification of parts used in NMR systems. The role requires proficiency in precision measurement tools, adherence to regulatory and safety guidelines, and a strong understanding of NMR product requirements. Hours are Monday- Thursday on 1st Shift - 4/10s schedule. RESPONSIBILITIES: Inspect NMR components and assemblies for dimensional accuracy and tolerance compliance according to engineering specifications. Perform visual inspections for surface finish, cleanliness, and assembly integrity based on NMR product guidelines. Use and maintain specialized measuring instruments (e.g., micrometers, calipers, gauges) and visual inspection equipment relevant to NMR parts. Verify magnet housing, coils, and associated hardware meet required standards for alignment and structural integrity. Read and interpret technical drawings, work instructions, and NMR-specific documentation. Complete inspection reports and maintain accurate quality records for NMR products. Communicate with supervision regarding equipment calibration needs, low supply levels, or any deviations from standard conditions. Ensure compliance with environmental, health, and safety regulations, including proper PPE usage and waste disposal. Maintain knowledge of NMR product quality standards and production processes. Keep work area clean and organized to prevent contamination of sensitive NMR components. Report unsafe conditions, spills, leaks, or incidents immediately to supervision. EXPERIENCE / QUALIFICATIONS: Experience in quality control within a precision manufacturing environment, ideally involving NMR or similar high-tech products. Ability to read and interpret complex technical drawings and specifications. Proficiency with precision measuring instruments and inspection tools. Strong attention to detail and problem-solving skills. High School Diploma or GED required. HSE All employees have the responsibility to work in a safe manner and report any health, safety or environmental concern to their manager or supervisor in a timely manner. Employee responsibilities for Health, Safety and Environment include: Work in compliance with divisional health, safety and environmental procedures Refrain from removing or altering safety devices or guarding unless hazardous energies are controlled through lockout-tagout methods Report any unsafe conditions or unsafe acts Report defect in any equipment or protective device Ensure that the required protective equipment is used for the assigned tasks Attend all required health, safety and environmental training Report any accidents/incidents to supervisor Assist in investigating accidents/incidents Refrain from engaging in any prank, contest, feat of strength, unnecessary running or rough and boisterous conduct Why SP Industries Inc.? The three parallelograms in our logo reflect our core company values: People, Process, and Performance. As part of ATS, SP leverages the ATS Business Model (ABM) to train, develop, engage, empower, and energize our people to make impactful changes in the organization. Our relentless focus on people is what continues to set us apart as a great place to build a career. • We provide a wide range of innovative and high-quality scientific products that improve people's lives • We offer a robust health and welfare benefits package that includes Life, Health, Dental, Vision • We offer 401(K) including company match, Paid Time Off annually + Paid Holidays • You will enjoy career Advancement Opportunities and Tuition Assistance to help you achieve your goals and continue your career growth ATS is a $2.2B publicly-traded global enterprise with a proud 40-year history of helping advance the future with automation solutions. SP Industries Inc. sits within the ATS Life Sciences Group and is a leading global provider of state-of-the-art fill-finish drug manufacturing solutions, research, pilot and production lyophilizers, laboratory equipment and supplies, and specialty glassware. SP supports research and production across diverse end-user markets including pharmaceuticals, life science, ophthalmic, environmental testing and monitoring, food and beverage and more. SP has a long and successful track record of quality and science innovation, and is headquartered in Warminster, Pennsylvania, with production facilities in the USA and Europe. SP offers a world-wide sales and service network including product training and technical assistance. For more information visit *************************** EEO and Affirmative Action Statement: SP is an Equal Opportunity Employer, dedicated to a policy of non-discrimination in employment on any basis and takes affirmative action to ensure equal employment opportunities. It is our policy to provide our employees and applicants with equal employment opportunities in accordance with applicable laws and not to discriminate on the basis of race, color, religion, ancestry, national origin, age, marital status, sex, gender identification, sexual orientation, genetic information, political belief, pregnancy, citizenship, handicap or disability, status as a veteran or member of the U.S. military, or any other characteristic protected by applicable federal, state, or local laws. SP's Affirmative Action Plan is available through the HR Department and may be accessed during normal business hours. Pay Transparency Nondiscrimination Provision: SP will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information

SUMMARY: This position completes all or any combination of, inspection and/or testing tasks required to ensure that manufactured items conform to company and industry quality standards as well as to contract specifications when required. These duties require a high degree of accuracy and attention to detail. SPECIFIC DUTIES/RESPONSIBILITIES: * Inspects and measures materials, products, and work for conformance to specifications and standards throughout the manufacturing cycle. * Accurately uses all standard measuring tools, including, but not limited to, rulers, calipers, and force gauges. * Interprets blueprints, data, and other materials to determine specifications, inspection and testing procedures, and measuring instruments required. * Records inspection data and quantities inspected on required inspection reports. * Collects and files inspection and test records in accordance with established record maintenance procedures. * Notifies supervisors and other personnel of production quality problems and assists in identifying and correcting these problems * Discusses inspection results with those responsible for products and recommends necessary corrective actions. * Completes all required record keeping, including time sheets, traceability forms, etc. * Understand part numbers and revision levels * Inspects customer repairs as needed. * Assist with the training of new inspectors as needed * Performs other related duties as required or assigned. * Follows company rules and procedures. QUALIFICATIONS: * 1 to 2 years quality inspection experience in manufacturing. * Functionally literate including able to read and write English documents. * Able to perform basic computations (add, subtract, multiply, divide in all units of measure using whole numbers, fractions, and decimals). * Capable of accurately using standard measuring tools. * Capable reading and interpreting manufacturing drawings and work specification sheets. * Detail oriented and able to maintain high accuracy standards. * U.S. citizen, permanent resident alien or otherwise able to review all export-controlled technical information EXPERIENCE: Six months to one year experience as a QC inspector in a manufacturing environment EDUCATION: High school diploma or GED WORK ENVIRONMENT: The work environment for this job is a manufacturing shop floor. The noise level is usually moderate due to sewing machines and traffic. PHYSICAL DEMANDS: The position requires that the employee is regularly required to sit, talk, and hear. The employee is frequently required to use hands to fingers such as with a keyboard. The employee is occasionally required to stand; walk; reach with hands and arms. The employee must regularly lift and/or move up to 10 pounds. The employee must occasionally lift and/or move up to 25 pounds without assistance. Specific vision abilities include close, distance, and color vision and the ability to adjust focus. SALARY RANGE: $18.45 - $20.64 / hour Apply / Submit Your Resume Your Name* Your Email* Additional Information (optional) (Word file or PDF only) Max file size: 5MB Website URL* Upload your resume* Please type the characters* This helps us prevent spam, thank you. Submit

$21.59-$28.79 Per Hour Make a Difference in YOUR Career! Our vision is both simple and ambitious: to put our drinks on every table. We are the world's largest bottler for retailers and A-brands. Our products are distributed worldwide from our production sites in Europe and North America. Although our own branding may not appear on the labels of the beverages we produce, there is a good chance you are reading this while sipping one of our drinks. Our ambition is to continually improve and it's what keeps us at the top of our game. We are solutions-based. We are innovative. We seek out new challenges and conquer them. This is our company ethos, but it's our people's too: Refresco is at the cutting edge of a fast-moving industry because we have passionate people pushing the boundaries of what's best. Stop and think: how would YOU put our drinks on every table? Position Overview: The role is responsible for batching and testing soft drinks; ensuring full quality control compliance within specifications. Specifically the role will involve the chemical analysis of soft drinks (HPLC, filtration, and distillation), microbiological testing (plate make up, aseptic techniques), calibration of equipment, effluent / water sampling and documentation control. Position Detail: LAB TECH: · Perform required tests in SPC data system at the standard frequency including CO2, brix, TA, air, codes, dew point, taste, odor, appearance, contents, sodium, etc. · Perform control drinks test as needed. · Perform can seam check at required frequency. · Perform weekly full round net content of filler. · Perform product changeovers at filler. · Valve troubleshooting and rebuilding. · Assist, train and mentor other lab techs with operational problems such as syrup issues, lab testing, CIP, micros, filler changeovers to improve effectiveness. · Assist as needed in production report filing, updating formulas, vendor information or any other lab related documents. · Verify and oversee water room testing and PM work as needed to insure compliance. · Verify that all production schedules are current and communicated to all depts. · Be SQF ready at all times by completing tours and following up on any issues. · Assist QA Manager and or Supervisor as needed. · Maintain communication with production regarding schedules and changes, syrup batch issues, etc. · Correct batch as needed according to the control drink results. · Ensure syrup tanks and High Shear mixer are CIP and have been verified clean by performing Taste, Odor, and Appearance testing. · Ensure every tank has been 7-stepped CIP at least once per week and before batching sensitive products. Maintain use of Chart Recorder. · Ensure that empty bags and containers are properly discarded of. · Follow all GMP guidelines at all times. · Keep work area clean and organized, keeping overhead door closed when not bringing in materials. · Ensure caps, gaskets, clamps, etc are kept clean and dry. · Ensure tanks are capped off and doors are closed after CIP. · Back up for this position is another trained lab tech. · Must have an understanding of SQF, responsible for Food, Safety/Food Quality and to notify a person with the authority to take action for any Food Safety or Food Quality issue. BATCHER TECHNICIAN: · Responsible for accurately following batch instruction sheets, dispensing and weighing dry ingredient weight and lot numbers. · Batch syrup using correct formulation and mixing instructions. · Physically lift ingredient bags up to 50 lbs and manually open 1 to 5 gallon pails and jugs. · Must have computer skills for requesting bulk ingredients through HMI (Human Machine Interface). · Operate cleaning in place (CIP) system and use transfer cleaning chemicals. · Review daily production schedules to coordinate what product to run. · Maintain the cleanliness of the batching and sugar rooms. · Ensure all Safety Standard (Company or Regulatory) are met at all times. · Ensure all Company Good Manufacturing Standards are met at all times. Working Conditions: Will work regularly around moving mechanical parts and equipment. Plant is very clean & is a safe environment. Regularly exposed to wet floors, humid conditions, cold conditions, and caustic chemicals. Noise level requires hearing protection. Will occasionally lift up to 75 pounds during shift. Will regularly be required to walk stand, use of hands and fingers, handle objects, tools, controls, reach with hands and arms, talk and hear. Employee will occasionally be required to sit, climb and or balance, stoop, kneel, crouch, crawl and smell., taste Vision requirements are close, distance, color, peripheral, depth and ability to adjust focus. Position Requirements: · Soft drinks experience preferred. · High school standard of education. · BS/BA in a scientific field, preferably Microbiology, with at least 1 college level course in Microbiology. · Understanding of GMP and Lab Safety, Standard Methods and processes. A Career with Refresco Refresco offers a competitive salary and comprehensive benefits, which include: · Medical/dental/vision insurance · Life insurance 401(k) savings plan with company match Paid holidays and vacation Well-being benefits Discount programs Join Refresco TODAY and enjoy a rewarding CAREER! Equal Opportunity Employer Refresco is an Equal Employment Opportunity/Affirmative Action employer. Refresco does not discriminate against qualified applicants or employees based on race, color, age, religion, sex, pregnancy, national origin, ancestry, age, physical or mental disability, veteran status, status in uniformed services, sexual orientation, gender identity, gender expression, marital status, genetic information, or any other status protected by law.

$21.59-$28.79 Per Hour Make a Difference in YOUR Career! Our vision is both simple and ambitious: to put our drinks on every table. We are the world's largest bottler for retailers and A-brands. Our products are distributed worldwide from our production sites in Europe and North America. Although our own branding may not appear on the labels of the beverages we produce, there is a good chance you are reading this while sipping one of our drinks. Our ambition is to continually improve and it's what keeps us at the top of our game. We are solutions-based. We are innovative. We seek out new challenges and conquer them. This is our company ethos, but it's our people's too: Refresco is at the cutting edge of a fast-moving industry because we have passionate people pushing the boundaries of what's best. Stop and think: how would YOU put our drinks on every table? Position Overview: The role is responsible for batching and testing soft drinks; ensuring full quality control compliance within specifications. Specifically the role will involve the chemical analysis of soft drinks (HPLC, filtration, and distillation), microbiological testing (plate make up, aseptic techniques), calibration of equipment, effluent / water sampling and documentation control. Position Detail: LAB TECH: * Perform required tests in SPC data system at the standard frequency including CO2, brix, TA, air, codes, dew point, taste, odor, appearance, contents, sodium, etc. * Perform control drinks test as needed. * Perform can seam check at required frequency. * Perform weekly full round net content of filler. * Perform product changeovers at filler. * Valve troubleshooting and rebuilding. * Assist, train and mentor other lab techs with operational problems such as syrup issues, lab testing, CIP, micros, filler changeovers to improve effectiveness. * Assist as needed in production report filing, updating formulas, vendor information or any other lab related documents. * Verify and oversee water room testing and PM work as needed to insure compliance. * Verify that all production schedules are current and communicated to all depts. * Be SQF ready at all times by completing tours and following up on any issues. * Assist QA Manager and or Supervisor as needed. * Maintain communication with production regarding schedules and changes, syrup batch issues, etc. * Correct batch as needed according to the control drink results. * Ensure syrup tanks and High Shear mixer are CIP and have been verified clean by performing Taste, Odor, and Appearance testing. * Ensure every tank has been 7-stepped CIP at least once per week and before batching sensitive products. Maintain use of Chart Recorder. * Ensure that empty bags and containers are properly discarded of. * Follow all GMP guidelines at all times. * Keep work area clean and organized, keeping overhead door closed when not bringing in materials. * Ensure caps, gaskets, clamps, etc are kept clean and dry. * Ensure tanks are capped off and doors are closed after CIP. * Back up for this position is another trained lab tech. * Must have an understanding of SQF, responsible for Food, Safety/Food Quality and to notify a person with the authority to take action for any Food Safety or Food Quality issue. * BATCHER TECHNICIAN: * Responsible for accurately following batch instruction sheets, dispensing and weighing dry ingredient weight and lot numbers. * Batch syrup using correct formulation and mixing instructions. * Physically lift ingredient bags up to 50 lbs and manually open 1 to 5 gallon pails and jugs. * Must have computer skills for requesting bulk ingredients through HMI (Human Machine Interface). * Operate cleaning in place (CIP) system and use transfer cleaning chemicals. * Review daily production schedules to coordinate what product to run. * Maintain the cleanliness of the batching and sugar rooms. * Ensure all Safety Standard (Company or Regulatory) are met at all times. * Ensure all Company Good Manufacturing Standards are met at all times. Working Conditions: Will work regularly around moving mechanical parts and equipment. Plant is very clean & is a safe environment. Regularly exposed to wet floors, humid conditions, cold conditions, and caustic chemicals. Noise level requires hearing protection. Will occasionally lift up to 75 pounds during shift. Will regularly be required to walk stand, use of hands and fingers, handle objects, tools, controls, reach with hands and arms, talk and hear. Employee will occasionally be required to sit, climb and or balance, stoop, kneel, crouch, crawl and smell., taste Vision requirements are close, distance, color, peripheral, depth and ability to adjust focus. Position Requirements: * Soft drinks experience preferred. * High school standard of education. * BS/BA in a scientific field, preferably Microbiology, with at least 1 college level course in Microbiology. * Understanding of GMP and Lab Safety, Standard Methods and processes. A Career with Refresco Refresco offers a competitive salary and comprehensive benefits, which include: * Medical/dental/vision insurance * Life insurance * 401(k) savings plan with company match * Paid holidays and vacation * Well-being benefits * Discount programs Join Refresco TODAY and enjoy a rewarding CAREER! Equal Opportunity Employer Refresco is an Equal Employment Opportunity/Affirmative Action employer. Refresco does not discriminate against qualified applicants or employees based on race, color, age, religion, sex, pregnancy, national origin, ancestry, age, physical or mental disability, veteran status, status in uniformed services, sexual orientation, gender identity, gender expression, marital status, genetic information, or any other status protected by law.

Level One: At the direction of the Quality manager, level one quality technicians train to develop the ability to use predetermined methods, operations, setups, and prescribed specifications to perform in-process and completed inspection of products such as machined parts, mechanical assemblies, processed parts and purchased standard hardware. They also perform verifications of part identification and configurations. Level one quality technicians will arrange inspection queues to identify priority work. In addition, they will identify and segregate non-conforming product using basic knowledge and understanding of Geometric Dimension and Tolerancing methods per ASME 14.5, and common inspection measuring equipment including, but not limited to, surface plates, micrometers, height gages, radius gages, protractors, profilometers, bore gauges, and dial indicators as necessary to complete assignments. Level one quality technicians will demonstrate blueprint reading and basic math skills, basic PC skills, including Microsoft Office and the ability to use MRP or ERP systems after instruction. Primary Duties & Responsibilities: Visually observe dimensional and functional characteristics of the product in final form. Perform first part on startup. Evaluate product manufacturing. Review all certifications for incoming material received. Perform in-process inspection of product during manufacturing and final inspection with use of optical comparators, thread gages, height gauges, calipers, micrometers and profilometer. Reconcile final inspection documentation for shipments. Perform all other duties as assigned. Required Skills: Ability to perform multiple tasks in a fast-paced environment to assure delivery requirements. Effective oral and written communication skills. Ability to keep accurate records. Detail oriented and quick learning ability. Ability to follow documented procedures and standards. Excellent time-management skills with the ability to work independently with little supervision. Experience & Education 0-1 years of recent and relevant work experience or training High School Diploma or GED Some Engineering or technical training/background strongly preferred. Proficiency with general computer usage Familiarity with precision measurement tools (calipers, micrometers, etc.) preferred. Working Conditions/Physical Requirements: N-Never, O-Occasionally (80%) Exposure to Adverse Working Conditions: · Noise, Noxious Orders, Temperatures F · Hazardous Materials O Physical Conditions: · Close Eye Work (computers, typing, reading, writing) F · Sedentary (continuous sitting) O · Light Work (standing, walking, lifting C · Moderate Work (lifting 15-30 pounds, prolonged use of small hand instruments or tools) F · Moderately Heavy Work (lifting, moving, loading up to 35 pounds) O · Heavy/Hard Work (above average strength & stamina) O Travel Requirements: · None

Performs inspection of aircraft, components, assemblies, tools or parts during modifications, installation, service, or overhaul to determine airworthiness, safety, or conformance to manufacturer's specifications, FAA accepted/approved data, and AS9100 Quality standards and requirements. This position will be based in Philadelphia, PA Essential Duties and Responsibilities: Duties and Responsibilities: % of Time 1. Performs inspection of aircraft, or parts during modifications, installation, or overhaul and is accountable for the determination of airworthiness, safety, and conformance to FAA accepted/ approved data, Company standards, and AS9100 requirements. 30 2. Interprets and checks engineering drawings for applicability to work scope, both hard copy and electronic, engineering change orders, FAA regulatory procedures, processes, and specifications. 10 3. Reviews engineering technical data for major alterations and major repairs. Documents in detail a description of the work accomplished on a FAA form 337. Determines whether a major repair or major alteration will require a field approval and submit FAA Form 337 to the FAA for a field approval. Responsible for writing Instructions for Continued Airworthiness (ICA's) maintenance work instructions on FAA Form 337. 5 4. Performs review of work orders for completeness, required repair station dedicated forms, and any other mandatory documents. 5 5. Performs research of FAA, EASA, and other foreign civil aviation authorities Airworthiness Directives (AD's). Creates and documents a dedicated compliance list for customer aircraft records. 5 6. Returns aircraft and aircraft parts to service in accordance with 14 CFR Part 43.9 or 14 CFR Part 43.11 by creating and signing an aircraft logbook entry, or completing a FAA Form 8130-3 for aircraft parts. Creates and updates customer aircraft records. 15 7. Interfaces with FAA Safety Inspectors during FAA audits of the Repair Station. 5 8. Supervises the work performed on site, and is responsible for ensuring that the appropriate work instructions are followed, and is responsible for the overall quality of the work performed for travel events (work away from the repair station). 5 9. Liaise with company Technical Representatives and Customer Support Managers for all matters relating to Quality concerning customer aircraft or parts. 5 10. Performs data collection and performs conformity inspections during the development of a STC project. Performs conformity inspections to fabricated parts by a vendor or in-house to ensure part meets engineering design requirements. 5 11. Prepares data package and presents to FAA for any aircraft certification changes. 5 12. Performs other duties and fulfill other responsibilities as assigned. This includes working as an aircraft maintenance technician if required. 5 TOTAL: 100% Qualifications for Position: Education High school diploma (or equivalent) College degree or Technical writing a plus Experience Minimum 5 years hands-on quality control inspector on turbine helicopters in a Part 145 Repair Station environment 5 years hands-on turbine helicopter maintenance experience AgustaWestland A109/A119/AW139/AW169/AW189 maintenance experience is a plus Competencies & Attributes Technical knowledge in the fields of mechanics, hydraulics, electricity, avionics, sheet metal, rigging, instruments, test flights, etc. to determine safety, airworthiness, conformance, and sign off work in aircraft records to meet the requirements of the FAA Federal Aviation Regulations Must be pro-active and team and detail oriented. Must have good working knowledge of FAR Part 145 and related areas. Must possess experience in Microsoft Office suite. Must be able to work independently Ability to travel occasionally. Ability to work weekends and/or be on-call. Licensure/Certification FAA A&P license a must, and Inspection Authorization (IA) rating is a plus Equal Opportunity Employer/Vet/Disability

Job Description At Amuneal, each product we create is influenced by exploration, research, investment, and a never-ending focus on the highest quality materials, cutting-edge technologies, and skilled craftsmanship. With nearly 60 years of experience, Amuneal operates two divisions in Philadelphia, each with a focus on the highest quality products, fed by a strategy focused on diversification. Amuneal's Technical Products Division is the country's largest and most respected supplier of magnetic shielding, while our award-winning Custom Fabrication Division creates original designs for high-end residential and commercial interiors. Amuneal Manufacturing is seeking a dedicated Quality Control Inspector to join our fast-paced, dedicated, and extremely talented team. Candidates should bring in a high level of excitement and punctuality. They will be responsible for performing set-up and production operations on projects of a wide variety, while maintaining standards for safety & quality. This role will operate on a 4 day, 10 hour work week of 6:00AM-4:30PM Monday-Thursday Responsibilities: Inspect - Conduct routine and non-routine inspection of materials at incoming, in-process, and final. First Article Inspection when required by the customer or quality management. Inspect - Perform tests, interpret test results, compare them to established specifications and control limits, and make recommendations on appropriateness of data/material for release. Calibration - Maintain inspection equipment in accordance with Amuneal's internal procedures and any relevant customer specifications. Document - Ensure drawings, work instructions, and procedures are maintained to current revision and accessible. Audit - Perform routine internal audits of processes and persons, as directed by relevant management. Train - Provide training and guidance to junior members of the Quality team. This includes the provision of oversight, and implementation of disciplines when it is necessary, as well as reporting on progress, or lack thereof, to relevant management. Straighten: Arrange items that are needed so that they are ready & easy to use. Clearly identify locations for all items so that anyone can find them & return them once the task is completed. Shine: Clean the workplace & equipment on a regular basis to maintain standards & identify defects. Standardize: Revisit the first three of the 5S on a frequent basis to maintain standards & identify defects. Sustain: Keep the rules to maintain the standard and continue to improve every day. Qualifications: High School Diploma/ GED required. Associates Degree, Bachelors Degree, or Technical school preferred. Knowledge of ISO 9001 Ability to read and understand blueprints Technically apt, with experience using Microsoft Suites. Use of CMM/ FARO Arm Preferred. Our work is custom in nature and highly evolving. As part of a team, you will work on a diverse set of challenging projects. Applicants should have experience and be able to thrive both in a collaborative setting and on solo tasks. This role offers a competitive salary in addition to inclusion in the company's profit sharing, 401K, medical, and dental programs. Benefits: 401(k) 401(k) matching Dental insurance Flexible schedule Health insurance Life insurance Paid time off Referral program Vision insurance Schedule: 4 Day Work Week Weekends as needed Ability to commute/relocate: Philadelphia, PA 19124: Reliably commute or planning to relocate before starting work (Required)

Precision. Purpose. Performance. At TrekConnect, a subsidiary of Heilind Mil-Aero, we build high-reliability cable and harness assemblies used in aerospace, defense, and other mission-critical applications. As a Quality Control Inspector, you'll play a key role ensuring every product leaving our facility meets the highest technical and reliability standards. This role is ideal for a detail-oriented individual with experience inspecting electrical or mechanical assemblies, using precision tools, and working to IPC/WHMA and AS9100 standards. You'll join a collaborative team that values craftsmanship, learning, and excellence. What You'll Do * Perform incoming, in-process, and final inspections on cables, wire harnesses, and electronic assemblies. * Verify components and assemblies meet specifications, drawings, and manufacturing instructions. * Use precision tools such as calipers, micrometers, force gauges, and torque wrenches for measurement and verification. * Conduct visual inspections using magnification tools and lighting to ensure defect-free workmanship. * Prepare AS9102-compliant First Article Inspection Reports (FAIR) and maintain accurate inspection records. * Collaborate with Production and Engineering to identify, document, and resolve nonconformances. * Support electrical testing of assemblies to verify continuity, insulation resistance, and proper termination. * Maintain high levels of organization, accuracy, and adherence to ISO 9001 and AS9100 standards. Why Join TrekConnect * Be part of a skilled technical team producing high-reliability components for defense and aerospace industries. * Work in a clean, organized, and precision-focused environment where your craftsmanship makes an impact. * Opportunities for career advancement and certification training in quality and manufacturing. * Comprehensive benefits, including: Medical, dental, and vision coverage, 401(k) with company match, PTO and paid holidays, tuition reimbursement, wellness and pet insurance programs, employee discounts and referral bonuses. What You Bring * 2+ years of experience inspecting electrical, cable, or wire harness assemblies in a manufacturing environment. * Ability to read and interpret engineering drawings, schematics, bills of materials, and work instructions. * Proficiency with inspection tools (calipers, micrometers, rulers, torque wrenches, etc.). * WHMA/IPC-A-620 certification (or willingness to obtain). * Experience with ESD, J-STD-001, or fiber optic assemblies is a plus. * Working knowledge of ISO 9001 / AS9100 quality systems. * Strong attention to detail, documentation accuracy, and problem-solving skills. * Adherence to all Safety and PPE Requirements * Must be a U.S. Citizen due to Naval contractual agreements. Physical Requirements While performing the duties of this job the employee is often required to sit, stand, walk, use computers, read, write, type, use copy machines, file paperwork, use telephones, and utilize written and oral communication to interact with clients, co-workers, and customers. Exerting up to 10 pounds of force regularly, and occasionally up to 25 pounds of force to lift, carry, push, pull or otherwise move objects. Specific vision abilities required by this job include close visual acuity to perform activities such as: inspecting manufactured parts (with and without magnification), preparing/analyzing data and figures; viewing a computer terminal; extensive reading. Distance vision, peripheral vision, depth perception, ability to adjust focus and ability to distinguish colors and color variation of physical parts and components, and in documentation such as work instructions and engineering drawings. Reasonable accommodations may be made to enable individuals to perform the essential functions of this job. Working Conditions While performing the duties of this job, the employee is occasionally exposed to work near moving mechanical parts and fumes or airborne particles. The noise level in the work environment is usually moderate.

Bring precision, curiosity, and craftsmanship to a team that builds components trusted by the U.S. Navy. At Interstate Connecting Components (ICC), a division of Heilind Mil-Aero, we take pride in engineering excellence. As a Quality Control Inspector, you'll play a key role in ensuring that every part we ship meets the highest standards of performance and safety. If you have experience inspecting, measuring, or testing mechanical, electrical, or assembled products - or even a background in pharmaceutical or chemical manufacturing where precision is everything - this could be the perfect next step in your quality career. What You'll Do Perform inspection and testing of incoming materials and finished products using precision tools (calipers, micrometers, thread gauges, drop gauges, etc.). Interpret engineering drawings and verify that products meet specifications before they reach our customers. Serve as the liaison between Quality and Warehouse teams, ensuring materials flow seamlessly from receipt to shipment. Conduct and coordinate Customer Source Inspections when required. Support investigations of nonconforming materials and contribute to process improvements. Accurately document inspections and results in our ERP system (Inventory, Order Entry, Purchasing, and Production modules). Assist with continuous improvement projects, developing better inspection methods and tools. Why You'll Love Working Here Purpose-driven work: Your inspections directly impact mission-critical equipment used in military and aerospace applications. Skill development: Get hands-on exposure to diverse products and inspection techniques in a growing organization. Comprehensive benefits package including medical, dental, and vision coverage; 401(k) with company match; PTO and holidays; tuition reimbursement; wellness and pet insurance programs; and referral bonuses.

Job Description We are seeking a detail-oriented and experienced 1st Shift , 2nd Shift , or 3rd Shift QC Inspector to join our team. The ideal candidate will play a crucial role in ensuring that our products meet the highest quality standards. This position involves conducting inspections, performing audits, and collaborating with various departments to maintain compliance with industry regulations and internal quality guidelines. Must be willing to work other shifts, overtime and weekends occasionally as necessary. Occasional local travel to help cover one of our other facilities in West Chester or King of Prussia may be necessary. Applicants must be authorized to work for ANY employer in the U.S. We are unable to sponsor or take over sponsorship of an employment Visa at this time. Responsibilities Work with specifications to determine inspections and tests required of materials and components to be accepted into the facility Complete In Process Inspection Quality Checks and record results Be willing to learn other Good Manufacturing Practice activities such as incoming inspection of components and sample retention processes Work with specifications and controlled documentation to perform the identified inspections for manufacturing, assembly, and packaging and record results Communicate issues and failures with the line supervisors and Quality Assurance Manager Review and approve batch records, line clearance, and 1st quality checks/samples Review the released product and finished goods documentation Review and approve Device History Records and assist in the release of finished goods/ components Assist the Quality Assurance Manager with inspections of compliance to Good Manufacturing Practices and regulations throughout the facility Serve as role model for Good Manufacturing Practice compliance Perform documentation control checks, specification control checks, and equipment calibration checks. Organize and maintain working documents Assist with troubleshooting root cause analysis Provide added compliance support and monitoring Assist Quality Assurance Manager with administrative support Assist in training new inspectors Skills Ability to perform and record inspections and observations accurately. Ability to engage in constructive discussions with production leadership Ability to demonstrate highly conscientious work performance Demonstrate general working knowledge of Word and Excel Demonstrate ability to work under pressure with accuracy and efficiency Demonstrate ability to be part of multi-functional team. Ability to evaluate quality control and quality assurance statistics. Ability to plan workload and remain flexible if changes are required due to demands Must be detail oriented Must be willing to work overtime or off shift if necessary Must be willing to travel locally to assist at other facilities as needed Must be able to read, write and speak fluent English Physical Requirements: While performing the duties of this job, the employee regularly works in a warehouse/manufacture setting. Must be able to stand for long periods of time Must be able to lift 25-30 lbs. Must be able to handle strong odors EEO Havpak, Inc. an equal opportunity employer that does not discriminate on the basis of race, national origin, gender, gender identity, sexual orientation, protected veteran status, disability, age, or other legally protected status. Our goal is to be a diverse workforce that is representative of our customers and communities. We are committed to building a team that is inclusive of a variety of backgrounds and perspectives. Job Type: Full-time Benefits: 401(k) Dental insurance Health insurance Paid time off Vision insurance Work Location: In person Company DescriptionHavpak is a world-leader in top-quality packaging, assembly and manufacturing services. Generating over 25 years of expertise, we have grown from a small family-owned company into a full-service global resource. We continue to grow by providing honest value to our loyal customers. We will deliver innovative, responsive solutions that create greater value for our customers and partner with our customers for the long term. We pride ourselves not only in our products - but in our employees that bring your ideas to life.Company DescriptionHavpak is a world-leader in top-quality packaging, assembly and manufacturing services. Generating over 25 years of expertise, we have grown from a small family-owned company into a full-service global resource. We continue to grow by providing honest value to our loyal customers. We will deliver innovative, responsive solutions that create greater value for our customers and partner with our customers for the long term. We pride ourselves not only in our products - but in our employees that bring your ideas to life.