Quality inspector jobs in Conway, AR - 36 jobs

As a Lab Technician you will support and perform multiple Manufacturing activities that contribute to specific technologies, or other business support objectives at the Little Rock, AR Plant for Protective and Marine Coatings. You will report to the Quality Assurance Manager. Key Responsibilities Follow established procedures and guidelines to perform routine laboratory procedures to test the quality of the organization's raw materials, in- process products, and finished products. Perform quantitative and qualitative chemical or biological analysis to verify process conditions and compile research data. Evaluate the physical characteristics of raw materials and products such as permeability, disintegration, and crystal growth viscosity. Record results, perform calculations, and prepare simple technical reports, including conclusions and recommendations. Follow instructions and checklists to set-up equipment and apparatus and mix chemical solutions for use in tests. Perform routine maintenance and safety checks on laboratory equipment to ensure it is in good working order. Qualifications Requires a high school education or equivalent 1-3 years lab experience Good record keeping Must comply with all safety and EH&S procedures Willingness to work in a team. #LI-Onsite Medical, Dental, 401K, paid vacation and holidays. About us: Here at PPG we make it happen, and we seek candidates of the highest integrity and professionalism who share our values, with the commitment and drive to strive today to do better than yesterday - everyday. PPG: WE PROTECT AND BEAUTIFY THE WORLD™ Through leadership in innovation, sustainability and color, PPG helps customers in industrial, transportation, consumer products, and construction markets and aftermarkets to enhance more surfaces in more ways than does any other company. To learn more, visit *********** and follow @ PPG on Twitter. The PPG Way Every single day at PPG: We partner with customers to create mutual value. We are "One PPG" to the world. We trust our people every day, in every way. We make it happen. We run it like we own it. We do better today than yesterday - everyday. PPG provides equal opportunity to all candidates and employees. We offer an opportunity to grow and develop your career in an environment that provides a fulfilling workplace for employees, creates an environment for continuous learning, and embraces the ideas and diversity of others. All qualified applicants will receive consideration for employment without regard to sex, pregnancy, race, color, creed, religion, national origin, age, disability status, marital status, sexual orientation, gender identity or expression. If you need assistance to complete your application due to a disability, please email ******************. PPG values your feedback on our recruiting process. We encourage you to visit Glassdoor.com and provide feedback on the process, so that we can do better today than yesterday. Benefits will be discussed with you by your recruiter during the hiring process. PPG pay ranges and benefits can vary by location which allows us to compensate employees competitively in different geographic markets. PPG considers several factors in making compensation decisions including, but not limited to, skill sets, experience and training, qualifications and education, licensure and certifications, and other organizational needs. Other incentives may apply. Our employee benefits programs are designed to support the health and well-being of our employees. Any insurance coverages and benefits will be in accordance with the terms and conditions of the applicable plans and associated governing plan documents.

JobID: 8801 JobSchedule: Full time JobShift: Day : As a 100% employee-owned contractor, when you work at Sundt, you're not just hiring on at a company, you're joining a culture. Because everyone at Sundt is part owner, you'll join a team of people who are deeply invested in their work. From apprentices to managers, we're passionate about the details and deliberate in everything we do. At Sundt we focus on building long-term prosperity for our clients, communities and employee-owners. We offer competitive pay, industry-leading benefits including a 401k and employee stock ownership plan, incentive programs for craft and administrative employees as well as training that focuses on your personal and professional growth. We're driven by skill, grit and purpose. Join us as we strive to be the most skilled builder in America Job Summary Basic Job FunctionsPosition is required to assist in the inspection, acceptance, and/or rejection of work performed in a particular discipline in compliance with applicable codes and/or specifications as dictated by quality programs and/or contract documents and specifications.Structural Inspection:Experience level must fall within the erection of structural steel. Must be able to work in elevated areas. Must have knowledge of AISC, AWS D1.1, and AWS D1.6 Codes. Must have knowledge of bolt?up inspection including bolt lot verifications using Skidmore?Wilhelm. Additionally, must have knowledge of architectural, insulation and lagging, grout and concrete placement, Epoxy anchor installation inspection. Must have CWI (Certified Welding Inspector) certification.Electrical and Instrumentation Inspection:Experience must fall in the installation of electrical and instrumentation components, including interconnecting wiring, cables, and tubing. Must be knowledgeable of ICEA, IEEE, ISA, NEC, NEMA, NESC, and NFPA Codes and standards.Mechanical Inspection:Experience level must fall in the setting and alignment of static and rotating equipment, equipment skids, coolers, tanks, and interconnecting process piping fabrication and installation. Must be able to use measuring tools such as micrometers, calipers, transits, etc. and be able to set up dial indicators and laser alignment devices.Piping Inspection:Experience level must fall in pipe installation inspection, including welding, supports, instrumentation, etc. Must have CWI (Certified Welding Inspector) certification. Key Responsibilities 1. Assists material handling personnel with required material storage and PM requirements as needed. 2. Communicates with others regarding inspections results and recommends corrective procedures. 3. Participates in activities to support the company's strategic planning efforts. 4. Participates in the preparation of Quality control ITP. 5. Performs control measuring and tests equipment. 6. Verifies the installation of the systems, components and equipment in accordance with the assigned discipline. Minimum Job Requirements 1. 1+ year construction practices 2. 1+ year in quality control inspection discipline 3. HS Degree Required 4. Proficient use of all Microsoft Office Suite programs Note: Job Description is subject to change at any time and may include other duties as assigned. Physical Requirements 1. Ability to wear personal protective equipment is required (including but not limited to; steel toed shoes, gloves, safety glasses, hearing protection, hardhat, vest, etc.) 2. May reach above shoulder heights and below the waist on a frequent basis 3. May stoop, kneel, or bend, on an occasional basis 4. May use telephone, computer system, email, or other electronic devices on a limited basis to communicate with internal and external customers or vendors 5. Must be able to comply with all safety standards and procedures 6. Occasionally will climb stairs, ladders, etc. 7. Required to use hands to grasp, lift, handle, carry or feel objects on a frequent basis 8. Will interact with people frequently during a shift/work day 9. Will lift, push or pull objects on an occasional basis 10. Will sit, stand or walk short distances for up to the entire duration of a shift/work day. Safety Level Safety-Sensitive Note: Jobs with the Safety-Sensitive designation are those that include tasks or duties that the employer reasonably believes could affect the safety and health of the employee performing the task or others such as operating a vehicle, operating equipment, operating machinery or power tools, repairing/maintaining the operation of any vehicle/equipment, the handling/disposal/transport of hazardous materials, or the handling/treatment/disposal of potentially flammable/combustible materials. Equal Opportunity Employer Statement: Sundt is committed to the equal treatment of all employees, and/or applicants for employment, and prohibits discrimination based on race, religion, sex (including pregnancy), sexual orientation, gender identity, color, age, disability, national origin, covered veteran status, genetic information; or any other classification protected by applicable Federal, state, or local laws. Benefit list: Market Competitive Salary (paid weekly) Bonus Eligibility based on company, group, and individual performance Employee Stock Ownership Plan & 401K Industry Leading Health Coverage Starting Your First Day Flexible Time Off (FTO) Medical, Health Savings, and Wellness credits Flexible Spending Accounts Employee Assistance Program Workplace Wellness Programs Mental Health Program Life and Disability Insurance Employee-Owner Perks Educational Assistance Sundt Foundation - Charitable Employee-Owner's program #LI-KW1

Quality Technician (Food & Beverage) Conway, AR The Opportunity The Quality Technician is responsible for performing quality functions to ensure products meet established Smurfit WestRock and customer quality standards. This role works closely with Production, the Quality Manager, and the Customer Service Department to support quality assurance activities across the plant. Responsibilities include calibration and maintenance of testing equipment, conducting quality, customer, and regulatory audits, and managing product samples and testing to ensure consistency of incoming materials and finished production. The Quality Technician will coordinate with the Quality Manager on rework activities and may lead sorting and rework processes as needed. This role also supports quality improvement initiatives, complaint management and resolution, and assists in maintaining the plant\u2019s Quality Program and SQF certification. Additional duties may be assigned to support business needs. How You Will Impact Smurfit WestRock Manage internal and external quality complaints. Lead rework and sorting processes when required. Perform calibration and maintenance of quality testing equipment. Analyze quality data and support general problem-solving efforts. Assist the Defect Elimination Team. Ensure the facility meets SQF and internal quality standards through proper documentation and adherence to processes. Support facility audits and regulatory compliance. Develop and implement corrective actions. Perform incoming material inspections. Complete additional duties as assigned. What You Need to Succeed Bachelor\u2019s degree from an accredited college or university preferred, or equivalent experience. Knowledge of the carton folding or packaging industry preferred. Strong communication, leadership, strategic and tactical planning, and problem-solving skills. Excellent written and verbal communication abilities. Proficiency in Microsoft Office applications, including Word, Excel, PowerPoint, and Outlook. Experience with data analysis and statistical methods. Ability to complete a computer skills assessment. Willingness to obtain Internal Auditor certification. SQF (Safe Quality Food) knowledge preferred. Willingness to travel occasionally. Strong attention to detail and organizational skills with the ability to multitask. Flexibility to meet changing business needs. Smurfit Westrock (NYSE:SW) is a global leader in sustainable paper and packaging solutions. We are materials scientists, packaging designers, mechanical engineers and manufacturing experts with a shared purpose: Innovate Boldly. Package Sustainably. Guided by our values of safety, loyalty, integrity, and respect, we use leading science and technology to move fiber-based packaging forward. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status or other characteristics protected by state or federal law.

Job DescriptionExperienced Construction Materials Testing (CMT) Technician Job Type: Full-Time Pay: $22.00 - $35.00/hour (DOE) + Overtime & Bonuses Expected Hours: 40-50 per week Join Us in Tulsa AIMRIGHT Testing & Engineering is expanding and hiring Experienced CMT Technicians who are ready to relocate to Tulsa and grow with a values-based team. We offer relocation assistance, steady work, and a clear development path-plus a company truck for daily field work once you're onboarded. Why AIMRIGHT Competitive pay with regular overtime & performance bonuses Relocation assistance to Tulsa, OK Company truck for daily field travel (after onboarding) Paid training & company-funded certifications (ACI, DOT, NICET, PTI) Strong safety culture and supportive leadership team What You'll Do Perform field testing, inspections, and observations on soils, aggregates, concrete, grout, mortar, asphalt, and reinforcing steel across residential, retail, commercial, industrial, and municipal projects. Drive to job sites daily in a company-provided truck; ensure compliance with project specs and standards. Read and interpret construction drawings and specifications. Accurately document test results and communicate findings with project managers, contractors, and clients. Work safely in all weather; stand, squat, bend, kneel, and lift 25-100 lbs throughout the day. Flex to project needs (early mornings, occasional nights/weekends). Qualifications & Requirements Experience: 1+ year in Construction Materials Testing (CMT). Certification: Portable Nuclear Gauge Safety Training (required). High School Diploma or GED. Valid driver's license with a clean MVR. Ability to pass a pre-employment drug test. Physically able to lift 25-100 lbs and work in all weather conditions. Willing to obtain additional industry certifications (ACI, DOT, NICET, PTI) - AIMRIGHT pays for training and exam fees. Compensation & Benefits Hourly: $22.00 - $35.00 (DOE) + overtime & performance bonuses Benefits: 401(k) with employer match; health, dental, vision, and life insurance PTO & Parental Leave Company Truck + cell phone allowance Relocation Assistance to Tulsa Long-term career growth & promotion opportunities in a stable, growing company Schedule Monday-Friday (with occasional nights/weekends as needed) Typical start times between 6:00 AM - 5:00 PM, depending on assignment Take the next step in your CMT career-relocate to Tulsa and build with a team that C.A.R.E.S. about quality, safety, and growth. Apply today and become part of a high-performing team. Powered by JazzHR bq Cs9vVyhY

Duties/Responsibilities: Inspect in-process and finished trailers to ensure compliance with company standards and requirements. Perform dimensional checks, weld inspections, paint finish evaluation, proper labeling, and functionality testing. Document inspection findings and maintain accurate quality records. Identify and report defects or non-conformances to appropriate departments. Work closely with production teams to address quality issues and recommend corrective actions. Conduct audits throughout the manufacturing process. Ensure adherence to safety protocols and quality control procedures. Assist in developing inspection procedures and quality checklists. Must perform other duties as assigned. Required Skills/Abilities: Demonstrated ability to work safely and follow all safety rules. Experience with tools such as a tape measurer, drywall screw gun, and general hand tools. Ability to thrive in a fast-paced, detail-oriented environment. Understanding of trailer components, welding, and assembly processes. Strong attention to detail and commitment to quality. Good communication and problem solving skills. Physical Requirements: Must be able to lift up to 50 pounds at times. Ability to stand, walk, and move around the manufacturing area for extended periods. Must be able to bend at the waist, kneel, and squat, walk, climb up and down ladders/scaffolding, stoop, carry materials. Use of personal protective equipment (PPE) as required. Must be able to work in hot or cold environments. Must be able to work in indoor or outdoor environments. May be exposed to welding, grinding, paint fumes, and machinery noise. Benefits: Health Insurance Dental Insurance Vision Insurance Basic Life Insurance Supplement Life Insurance Flex Spending Account and Dependent Care Account Pet insurance Vacation and/or Sick time accruals Rain Instant pay (Can receive up to 50% of the pay you have earned before each pay period) 401(k) with Employer Match Job Summary: The Cargo Quality Control inspector ensures that all trailers meet the company standards and customer specifications through inspection of each trailer produced before it is shipped to our customer. Supervisory Responsibilities: None. As an Equal Opportunity Employer, Interstate Group, LLC is committed to providing equal employment opportunities to all qualified individuals without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or veteran status.

Ballistics Quality Technician I 1st Shift Weekend SIG SAUER, Inc. is a leading provider and manufacturer of firearms, electro-optics, ammunition, airguns, suppressors, remote controlled weapons stations, and training. For over 250 years SIG SAUER, Inc. has evolved, and thrived, by blending American ingenuity, German engineering, and Swiss precision. Today, SIG SAUER is synonymous with industry-leading quality and innovation which has made it the brand of choice amongst the U.S. Military, the global defense community, law enforcement, competitive shooters, hunters, and responsible citizens. Additionally, SIG SAUER is the premier provider of elite firearms instruction and tactical training at the SIG SAUER Academy. Headquartered in Newington, New Hampshire, SIG SAUER has over 3,400 employees across sixteen U.S. locations in three states, and four additional global facilities. SIG SAUER is certified a Great Place to Work™. For more information about the company and product line visit: www.sigsauer.com Position Summary: The Ballistics Quality Technician I is responsible for visual and dimensional inspection and performance testing of ammunition following control and test plans as well as testing to assist R&D, Manufacturing Engineering, and Quality on design for manufacturing and production issues. This individual has basic knowledge of firearms, ammunition, components, assemblies, and product form, fit, and function. The Ballistics Quality Technician I works with internal Quality team members, R&D, Manufacturing Engineering, and Production, and interfaces, under supervision, with U.S. and foreign government customers. FLSA: Non-exempt Job Duties and Responsibilities: Perform basic ammunition ballistics tests in accordance with control plans and work instructions based on Sporting Arms and Ammunition Manufacturing Institute (SAAMI) or government test standards which may include chamber pressure and velocity, action time, dispersion, primer sensitivity, extraction, waterproofness, terminal ballistics, and function and casualty with supervision. Supports First Article and Lot Acceptance Tests as assigned. Follow the Red Tag process and notifies management clearly and completely of any nonconformities found. Review Bills of Materials throughout production to ensure components are correct and lot numbering is effective. Perform basic range inspections as assigned in accordance with written procedures. May travel to locations as assigned to participate in tests, potentially in front of customers including U.S. and foreign government representatives. Participate in 5S workplace organizational activities and maintain the area in good working order through sustainment activities. Engages in Continuous Improvement projects and tasks. Follow all required Safety and ISO procedures. Regular on-site attendance and punctuality is a necessary function of this position. May be required to work in other functional areas and/or facilities depending on business needs. May be required to work overtime or alternate shifts based on business needs. Miscellaneous duties as assigned. Education/Experience & Skills: High School diploma or equivalent. No prior experience required. Basic drawing and blueprint reading abilities. Computer skills and experience with Microsoft Office Suite and training on fundamental data analysis techniques. Familiarity with Oracle EBS. Must be able to pass range certification within the first year. Obtain and maintain an understanding of Sporting Arms and Ammunition Manufacturing Institute (SAAMI) and government test standards. Establish and maintain functional knowledge of the operation and maintenance of all quality inspection equipment used in the ammunition manufacturing process. Must be able to clearly, concisely, and accurately convey ideas and information to others, both verbally and in written form. Ability to effectively present information in one-on-one and small group situations to customers, suppliers, management, and fellow employees. Able to seek out ways to assist others without being asked while completing assigned tasks on time and displaying a high degree of professionalism with a collaborative attitude. Must be able to complete assigned tasks on time and alert leadership when obstacles prevent task completion within assigned schedule. Communicate effectively to supervision regarding problems and corrective action. Working Conditions: Regularly perform repetitive tasks. Work is primarily standing (90 + % of the shift) except for lunch and break periods. Shifts are 8 hours, 10 hours, and 12 hours. The duties of this job normally require exposure to a typical manufacturing environment. Frequent standing, sitting, stooping, squatting, walking, and stair climbing can be expected along with frequent lifting and/or moving of tooling, parts containers, and materials up to 40 pounds. Must be able to reach with hands and arms, bend and kneel frequently at a minimum of 50% of the shift, as well as undergo repetitive wrist, hand, elbow, shoulder, and ankle motions. Must demonstrate proficient fine motor skills, ability to grip, reach, pull, turn, and use tools to torque fixtures in various machinery or in the assembly, machining, or testing of parts. Specific vision abilities required may include close vision, distance vision, peripheral and depth perception, and the ability to focus on fine print. Must wear required Personal Protective Equipment (PPE) where required. Must comply with all work exposure EH&S training requirements and adhere to SIG SAUER Inc. security mandates. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status or other characteristics protected by law.

QA Inspector IJob Description Kito Crosby is the world leader in the heavy lift and securement industry. We set the standard for quality, training, and technical expertise in the field. It's our goal to exceed the expectations of our customers through technical leadership, innovative solutions, vertically integrated manufacturing, premier use of support, and a value-added distribution channel. We are committed to investing in and developing our employees' talents and leadership and are currently seeking candidates for this position. We offer a competitive compensation and benefits package that includes paid time off, medical, dental, vision, life and disability coverages, 401(k) with company match and 10 paid holidays annually. As part of the Kito Crosby team, you will be supporting channel partners and end users around the world using Kito Crosby products in mission critical applications ranging from development of renewable power, space exploration, national defense, manufacturing and infrastructure development. Job Summary: Perform all level inspections, working to prescribed tolerances, to check and approve for quality, raw materials, parts in process, paintings and coatings, heat treating (verify Brinell hardness), components, sub-assemblies, final assemblies, tooling, returned items, and parts and sub-assemblies received from subcontractors and suppliers, to meet Company standards and customer satisfaction. Inspect and certify welds following supervisor's guidelines and company inspection procedures. Use precision measuring instruments. Provide inspection reports and maintain required inspection records. Inspect per receiving inspection procedures for N.D.T. and receiving dock inspection. Must have and maintain a current AWS-CWI certification. Principal Duties and Responsibilities: Conduct mechanical inspections on raw materials, incoming parts, and subassemblies from suppliers and subcontractors, first-run, random and final inspection working to prescribed tolerances. * Make visual and dimensional checks of raw materials, forgings, machined and fabricated parts, components, sub-assemblies, paintings and coatings, heat treating, final assemblies, tooling and returned items to assure quality production. * Perform in-process inspection on the paint line and the galvanizing department. Perform Magnetic Particle, dye penetrant, and ultrasonic inspections on castings, forgings, and weldments for receiving inspection and work in progress. * Confer with QA Manager or Supervisor/Assistant Supervisor on rejects, determining the need for rework of parts or components and other problems detected through inspection. * Use precision measuring instruments, including micrometers, scales, calipers, and pertinent gages. * Provide inspection reports and maintain required inspection records. * May conduct inspection of items at outside vendors regarding quality of processed or purchased items. Conduct visual and dimensional inspection of receiving dock inventory. * Inspect final assemblies for shipment. * Job Specifications: Magnetic particle inspection in a machine shop (Preferred) Ability to operate Jib cranes handling large parts safely. Magnetic particle inspection certified to level I (Preferred) Must operate Mag, UT equipment, and overhead hoists. Must be able to pass eye exam. Educational Requirements: Vocational School (preferred). High school diploma or GED required. Physical / Environmental Conditions: Normal office conditions. Office located in a two-story office building. Job demands may require long periods of sitting, telephone work and/or computer work, as well as interaction with other people. Normal office conditions include walking, standing, bending, kneeling, climbing stairs, lifting, driving and/or traveling. Moderate exposure to shop conditions, which are variable depending on the task assigned, but are generally dirty. Is subject to shop noise. Involves extensive standing and walking. Skin and eyes are subject to drying and irritating fumes, vapors and solutions controlled to OSHA standards. Works both in and out of doors, normally indoors, with sometimes dusty or confining work areas when in the shop/lab. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Great job for Uber Drivers, Lyft, Door Dash, Uber Eats, Pizza delivery, etc. What Do Mortgage Field Service Contractors Do? By law, mortgage companies and banks are required to document the occupancy and physical condition of all mortgaged loans. To do this they send a Property Inspector to the physical property to take specific photos and to reasonably determine if the property is occupied or vacant. The property inspector then reports the general condition of the property using a mobile app. Mortgage Field Service Inspectors are Property Inspectors who: *Determine if a property is occupied or vacant. *Rate the property as Good, Fair, or Poor. *Take photos of the property using your smart cell phone. *Fill out a form on your cell phone using a downloadable app. *Answer multiple choice questions about the property condition. REQUIREMENTS: *Must be able to pass a criminal background check. *Must have dependable transportation (good gas mileage is a plus). *Must have a smartphone (Android or iPhone). *Must have a printer/scanner (or easy access to both). *Must a desktop/laptop or tablet to print forms. INCOME and ASSIGNMENTS: Income-based on area and volume. Most inspectors can complete several inspections an hour. Rural areas may pay more per inspection on average. The faster inspections are completed, the more inspections are provided. Based on 1099 contractor work. No resume required.

Job DescriptionConstruction Materials Testing (CMT) Technician Thompson Engineering is seeking qualified Construction Materials Testing (CMT) Technicians for multiple locations. This position is responsible for the daily oversight of construction materials testing and inspection activities on active construction sites to ensure compliance with project specifications, industry standards, and quality requirements. Ideal candidates will demonstrate flexibility and a willingness to travel across multi-states to various job sites as needed. Key Responsibilities Perform field testing of construction materials using a 40-pound nuclear density gauge Obtain concrete samples from ready-mix trucks and prepare concrete test cylinders Conduct concrete testing and transport samples to the laboratory for further analysis Collect, document, and deliver soil samples from job sites to the laboratory Observe construction activities and accurately record performance data Perform visual inspections of reinforcing steel (rebar) Maintain detailed daily field diaries documenting project activities Prepare and submit daily reports and required documentation to the Team Leader in accordance with project specifications Ensure quality and quantity standards are met on all assigned work Proactively review project documents and testing procedures to understand technical requirements Communicate professionally and ethically with clients, contractors, and team members Maintain company-owned equipment in safe, proper working condition Report any required corrective actions to the Team Leader to ensure work quality meets company standards Follow all written procedures, company policies, and safety requirements Complete field activities and reports accurately and in a timely manner Perform all duties in a professional, ethical manner Additional Responsibilities Establish personal goals for continuous improvement and job performance Maintain reliable, punctual, and regular attendance Attend and actively participate in safety meetings and training programs Perform other duties as assigned QualificationsMinimum Requirements High school diploma or equivalent Minimum of six (6) months of construction materials testing experience ACI Level I Certification (or ability to obtain) Nuclear Gauge Certification Ability to communicate effectively both verbally and in writing Valid driver's license Ability to read and write in English Willingness to travel to various job sites as required Level and compensation commensurate with experience Physical Requirements Ability to work flexible schedules and overtime as required by operational needs Ability to lift and carry a minimum of 50 pounds Ability to safely operate a company vehicle Ability to push or pull up to 400 pounds using a wheelbarrow Ability to walk, stoop, bend, climb stairs and ladders Ability to work on uneven terrain including concrete, gravel, dirt, and grass Ability to work at elevated heights and in open structures Ability to work outdoors for extended periods in varying weather conditions Ability to wear required personal protective equipment (PPE) About Thompson Engineering Founded in 1953, Thompson Engineering provides quality assurance and professional services for construction projects supporting industrial, infrastructure, and community development. Our services include drilling, materials testing, construction inspection, chemistry laboratory services, engineering design, environmental assessments, surveying, geotechnical studies, and construction management. Today, Thompson Engineering is recognized for leadership on projects that define skylines, coastlines, and transportation networks across the Southeast. From project planning and design through construction and completion, we deliver innovative solutions to complex infrastructure and building challenges for industrial, commercial, transportation, federal, and municipal clients.

Job DescriptionDescription: About the Company: We provide specialized subcontracting and technical assistance services to support clients in the transport and aerospace industries. We work closely with clients to ensure that our solutions meet their needs and exceed their expectations. Our team members are motivated individuals that do remarkable things every day! Position Summary: AAA, United States, Inc. has partnered with a company in Little Rock, Arkansas that shapes the future by designing and building military aircraft, business jets and space systems. We are looking for experienced Quality Control A Inspectors who are seeking their next opportunity in a complex and ever-changing work environment! The Quality Control A Inspector performs in-process and final inspections of aircraft systems and components to determine the conformity of the aircraft to approved data and airworthiness. Perform installation inspections of components, structures, wiring and other aircraft associated items for conformity to engineering and other approved data. Essential Functions: Perform complete major inspection of aircraft, components, major assemblies, sub- assemblies, production tools or parts during manufacturing, modifications, installation, service, overhaul or flight to determine airworthiness, safety or conformance to approved data and Company standards and requirements. Apply technical knowledge in the fields of mechanics, hydraulics, electricity, sheet metal, rigging, instruments, test flights, etc. to determine and sign off safety, airworthiness, or conformance. Perform conformity inspection of components, major assemblies, sub-assemblies, or parts during manufacturing, modifications, installations to determine safety or conformance to standards and requirements. Interpret and check prints, both hard copy and electronic, engineering change orders and governmental regulatory procedures and specifications. Determine extent of work to be performed where no specifications, regulations or written standards are available. Use precision measuring guides, gauges and laboratory instruments. Is familiar with FAR Part 145, 135, 91, 65 and 21 and related A/C's Is familiar with FWW processes. Prepare necessary aircraft related FAA, customer or company documents. Complete and maintain reports and records as required. Accurately enter electronic data related to aircraft production, completion and installation operations. Suggest dispositions of damaged or worn parts and the possibility of salvage based on FAA/EASA regulations, company practices or procedures. Work in a safe manner in accordance with OSHA and company safety procedures. Perform all other duties as assigned as assigned Requirements: High school diploma or equivalent. Airframe certificate Minimum of 5 years experience in maintenance of aircraft Experience with FAR 145 Repair Station and FAR 43 Maintenance. Able to read and understand structural and avionic drawings, schematics, test procedures, etc. Good verbal and written communication skills to prepare detailed reports. Computer literacy Able to walk up and down steps with or without reasonable accommodation Able to walk long distances, climb, stand, and kneel for extended periods of time with or without reasonable accommodation Pass vision testing, minimum 20/20 corrected, and with no limitations in color perception. Able to access confined areas. Working knowledge of Federal Aviation Regulations', Type Certificate Data Sheet, Airworthiness Directives', Advisory Circulars, etc. Able to work in a high noise environment (jet engines, air tools, etc.) with or without reasonable accommodation

3pm-11pm Job Summary: The Quality Inspector ensures acceptable extruded parts and finished products by inspecting and testing to the required standards, drawings, specifications, and process instructions. The inspector will make suggestions and assist the Production Team in identifying issues and preventing recurrence. Duties & Responsibilities: Follow safe work procedures Perform dimensional checks on extruded parts at press or finishing department to ensure they are within tolerance per specifications; and work with press crew or supervisor in correcting out of tolerance situations Verifies cut lengths, squareness, and perpendicularity are correct at saw operations Perform etch and swage tests Prepare and maintain quality system records, including inventory status (holds, scrap, etc.) Works with control of non-conforming products, corrective and preventive actions, inspection status Perform pre-stretch as required Checks parts being prepared for shipment to ensure they are packaged correctly Prepare or test tensile specimens Supports and sustains the plant 5S system Assists in other functions as needed by shift supervisor or quality manager as previously trained Knowledge, Skills, and Abilities: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Read and understand job sheets, work instructions and route tags. Utilize applicable measuring equipment and work instructions (very important) Demonstrate basic proficiency in computer skills including Microsoft 365 applications. Demonstrate ability to perform without supervision and work overtime as required. Demonstrate ability to complete all applicable paperwork associated with this job title. Individual is familiar with lockout/tagout and other safety related items associated with this job title. Ability to read and comprehend simple instructions, short correspondence and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients and other employees of the organization. Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations.

Job Title: QC Inspector - Nuclear Outage Type: Contract System One is looking for a nuclear experienced Quality Control Inspector for the Spring refuel outage. The positions advertised for are from February through May of 2026. Qualifications in the following areas are a plus: + QC Electrical + QC I&C + QC Mechanical + QC Civil + QC Receiving + QC Welding System One, and its subsidiaries including Joulé, ALTA IT Services, and Mountain Ltd., are leaders in delivering outsourced services and workforce solutions across North America. We help clients get work done more efficiently and economically, without compromising quality. System One not only serves as a valued partner for our clients, but we offer eligible employees health and welfare benefits coverage options including medical, dental, vision, spending accounts, life insurance, voluntary plans, as well as participation in a 401(k) plan. System One is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, age, national origin, disability, family care or medical leave status, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local law. #M- #LI-AM1 #DI- Ref: #369-Nuclear Fort Mill System One, and its subsidiaries including Joulé, ALTA IT Services, CM Access, TPGS, and MOUNTAIN, LTD., are leaders in delivering workforce solutions and integrated services across North America. We help clients get work done more efficiently and economically, without compromising quality. System One not only serves as a valued partner for our clients, but we offer eligible full-time employees health and welfare benefits coverage options including medical, dental, vision, spending accounts, life insurance, voluntary plans, as well as participation in a 401(k) plan. System One is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, age, national origin, disability, family care or medical leave status, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local law.

Job Description Perform major inspections of the aircraft. Inspect modifications, alterations and repairs to the aircraft, components, major assemblies or sub-assemblies to applicable approved data and document their findings in accordance with FAA and company procedures. Make appropriate log book entries to document work performed by the repair station in accordance with FAA regulations. Interface with the maintenance floor supervisor, customer and FAA as required to accomplish their duties in a professional manner. Ensure safety of the product being serviced and the documentation of the maintenance being performed by the repair station. Job Duties & Responsibilities Accomplishes all work while following company and industry safety standards while maintaining the highest level of quality. Adheres to all FAA Regulations, the Repair Station Quality Control Manual (RSQCM), and all other approved data. Perform to company standards, work instructions, and perform necessary calculations using shop math to conform tooling, detailed parts, assemblies and installations. Performs complete inspection of components and production tools to determine safety or conformance to standards and requirements. Use precision measuring guides, gauges and laboratory instruments. Is familiar with FAR Part 145, 135, 91, 65, 21 and related A/C's rev. 1 Complete and maintain other reports and records as required. Accurately log computerized labor data collection for time and attendance tracking. Follows specific authorizations as listed on Inspection Authorization Letter. Contributes to a positive work environment while maintaining the utmost level of professionalism at all times. Able and willing to mentor others. Able to communicate technical information clearly to supervisory personnel, flight crews and customers. Works assigned shift and unscheduled overtime as-needed or requested. Ability to travel and perform AOG maintenance. Occasionally communicates directly with customers and vendors. Maintains a clean and organized work area at all times and adheres to company dress standards. Perform all other duties as assigned to support the efficient operation of the department and company Shift Friday- Sunday 7am-7:30pm Qualifications High school graduate or equivalent with additional courses in aircraft maintenance in recognized service or technical school programs. 3+ years aircraft related experience required 2+ years aircraft inspection experience preferred FAA Airframe and Powerplant Certificate required Good knowledge of FAA regulations as pertaining to aircraft maintenance. Must have required tools. Intermediate computer skills preferred. Turbine jet aircraft training and experience - Dassault Falcon Models preferred. FAA Inspection Authorization certification preferred Working Conditions Works in a climate controlled hangars. (Heated and Cooled) Occasionally works outside on tarmac in atmospheric weather conditions. Physical Requirements Ability to wear and utilize personal protective equipment Must be able to lift up to 50 pounds without assistance Must be able to lift and carry up to 100 pounds with assistance Comfortable in tightly enclosed areas, heights involving lifts and ladders, as well as, flying. Requires the ability to perform all physical functions of the job (hear, stand, kneel, walk, etc.)

As a 100% employee-owned contractor, when you work at Sundt, you're not just hiring on at a company, you're joining a culture. Because everyone at Sundt is part owner, you'll join a team of people who are deeply invested in their work. From apprentices to managers, we're passionate about the details and deliberate in everything we do. At Sundt we focus on building long-term prosperity for our clients, communities and employee-owners. We offer competitive pay, industry-leading benefits including a 401k and employee stock ownership plan, incentive programs for craft and administrative employees as well as training that focuses on your personal and professional growth. We're driven by skill, grit and purpose. Join us as we strive to be the most skilled builder in America Job Summary Basic Job FunctionsPosition is required to assist in the inspection, acceptance, and/or rejection of work performed in a particular discipline in compliance with applicable codes and/or specifications as dictated by quality programs and/or contract documents and specifications.Structural Inspection:Experience level must fall within the erection of structural steel. Must be able to work in elevated areas. Must have knowledge of AISC, AWS D1.1, and AWS D1.6 Codes. Must have knowledge of bolt?up inspection including bolt lot verifications using Skidmore?Wilhelm. Additionally, must have knowledge of architectural, insulation and lagging, grout and concrete placement, Epoxy anchor installation inspection. Must have CWI (Certified Welding Inspector) certification.Electrical and Instrumentation Inspection:Experience must fall in the installation of electrical and instrumentation components, including interconnecting wiring, cables, and tubing. Must be knowledgeable of ICEA, IEEE, ISA, NEC, NEMA, NESC, and NFPA Codes and standards.Mechanical Inspection:Experience level must fall in the setting and alignment of static and rotating equipment, equipment skids, coolers, tanks, and interconnecting process piping fabrication and installation. Must be able to use measuring tools such as micrometers, calipers, transits, etc. and be able to set up dial indicators and laser alignment devices.Piping Inspection:Experience level must fall in pipe installation inspection, including welding, supports, instrumentation, etc. Must have CWI (Certified Welding Inspector) certification. Key Responsibilities 1. Assists material handling personnel with required material storage and PM requirements as needed. 2. Communicates with others regarding inspections results and recommends corrective procedures. 3. Participates in activities to support the company's strategic planning efforts. 4. Participates in the preparation of Quality control ITP. 5. Performs control measuring and tests equipment. 6. Verifies the installation of the systems, components and equipment in accordance with the assigned discipline. Minimum Job Requirements 1. 1+ year construction practices 2. 1+ year in quality control inspection discipline 3. HS Degree Required 4. Proficient use of all Microsoft Office Suite programs Note: Job Description is subject to change at any time and may include other duties as assigned. Physical Requirements 1. Ability to wear personal protective equipment is required (including but not limited to; steel toed shoes, gloves, safety glasses, hearing protection, hardhat, vest, etc.) 2. May reach above shoulder heights and below the waist on a frequent basis 3. May stoop, kneel, or bend, on an occasional basis 4. May use telephone, computer system, email, or other electronic devices on a limited basis to communicate with internal and external customers or vendors 5. Must be able to comply with all safety standards and procedures 6. Occasionally will climb stairs, ladders, etc. 7. Required to use hands to grasp, lift, handle, carry or feel objects on a frequent basis 8. Will interact with people frequently during a shift/work day 9. Will lift, push or pull objects on an occasional basis 10. Will sit, stand or walk short distances for up to the entire duration of a shift/work day. Safety Level Safety-Sensitive Note: Jobs with the Safety-Sensitive designation are those that include tasks or duties that the employer reasonably believes could affect the safety and health of the employee performing the task or others such as operating a vehicle, operating equipment, operating machinery or power tools, repairing/maintaining the operation of any vehicle/equipment, the handling/disposal/transport of hazardous materials, or the handling/treatment/disposal of potentially flammable/combustible materials. Equal Opportunity Employer Statement: Sundt is committed to the equal treatment of all employees, and/or applicants for employment, and prohibits discrimination based on race, religion, sex (including pregnancy), sexual orientation, gender identity, color, age, disability, national origin, covered veteran status, genetic information; or any other classification protected by applicable Federal, state, or local laws. Benefit list: Market Competitive Salary (paid weekly) Bonus Eligibility based on company, group, and individual performance Employee Stock Ownership Plan & 401K Industry Leading Health Coverage Starting Your First Day Flexible Time Off (FTO) Medical, Health Savings, and Wellness credits Flexible Spending Accounts Employee Assistance Program Workplace Wellness Programs Mental Health Program Life and Disability Insurance Employee-Owner Perks Educational Assistance Sundt Foundation - Charitable Employee-Owner's program #LI-KW1

Experienced Construction Materials Testing (CMT) Technician Job Type: Full-Time Pay: $22.00 - $35.00/hour (DOE) + Overtime & Bonuses Expected Hours: 40-50 per week Join Us in Tulsa AIMRIGHT Testing & Engineering is expanding and hiring Experienced CMT Technicians who are ready to relocate to Tulsa and grow with a values-based team. We offer relocation assistance, steady work, and a clear development path-plus a company truck for daily field work once you're onboarded. Why AIMRIGHT Competitive pay with regular overtime & performance bonuses Relocation assistance to Tulsa, OK Company truck for daily field travel (after onboarding) Paid training & company-funded certifications (ACI, DOT, NICET, PTI) Strong safety culture and supportive leadership team What You'll Do Perform field testing, inspections, and observations on soils, aggregates, concrete, grout, mortar, asphalt, and reinforcing steel across residential, retail, commercial, industrial, and municipal projects. Drive to job sites daily in a company-provided truck; ensure compliance with project specs and standards. Read and interpret construction drawings and specifications. Accurately document test results and communicate findings with project managers, contractors, and clients. Work safely in all weather; stand, squat, bend, kneel, and lift 25-100 lbs throughout the day. Flex to project needs (early mornings, occasional nights/weekends). Qualifications & Requirements Experience: 1+ year in Construction Materials Testing (CMT). Certification: Portable Nuclear Gauge Safety Training (required). High School Diploma or GED. Valid driver's license with a clean MVR. Ability to pass a pre-employment drug test. Physically able to lift 25-100 lbs and work in all weather conditions. Willing to obtain additional industry certifications (ACI, DOT, NICET, PTI) - AIMRIGHT pays for training and exam fees. Compensation & Benefits Hourly: $22.00 - $35.00 (DOE) + overtime & performance bonuses Benefits: 401(k) with employer match; health, dental, vision, and life insurance PTO & Parental Leave Company Truck + cell phone allowance Relocation Assistance to Tulsa Long-term career growth & promotion opportunities in a stable, growing company Schedule Monday-Friday (with occasional nights/weekends as needed) Typical start times between 6:00 AM - 5:00 PM, depending on assignment Take the next step in your CMT career-relocate to Tulsa and build with a team that C.A.R.E.S. about quality, safety, and growth. Apply today and become part of a high-performing team.

Construction Materials Testing (CMT) Technician Thompson Engineering is seeking qualified Construction Materials Testing (CMT) Technicians for multiple locations. This position is responsible for the daily oversight of construction materials testing and inspection activities on active construction sites to ensure compliance with project specifications, industry standards, and quality requirements. Ideal candidates will demonstrate flexibility and a willingness to travel across multi-states to various job sites as needed. Key Responsibilities * Perform field testing of construction materials using a 40-pound nuclear density gauge * Obtain concrete samples from ready-mix trucks and prepare concrete test cylinders * Conduct concrete testing and transport samples to the laboratory for further analysis * Collect, document, and deliver soil samples from job sites to the laboratory * Observe construction activities and accurately record performance data * Perform visual inspections of reinforcing steel (rebar) * Maintain detailed daily field diaries documenting project activities * Prepare and submit daily reports and required documentation to the Team Leader in accordance with project specifications * Ensure quality and quantity standards are met on all assigned work * Proactively review project documents and testing procedures to understand technical requirements * Communicate professionally and ethically with clients, contractors, and team members * Maintain company-owned equipment in safe, proper working condition * Report any required corrective actions to the Team Leader to ensure work quality meets company standards * Follow all written procedures, company policies, and safety requirements * Complete field activities and reports accurately and in a timely manner * Perform all duties in a professional, ethical manner Additional Responsibilities * Establish personal goals for continuous improvement and job performance * Maintain reliable, punctual, and regular attendance * Attend and actively participate in safety meetings and training programs * Perform other duties as assigned Qualifications Minimum Requirements * High school diploma or equivalent * Minimum of six (6) months of construction materials testing experience * ACI Level I Certification (or ability to obtain) * Nuclear Gauge Certification * Ability to communicate effectively both verbally and in writing * Valid driver's license * Ability to read and write in English * Willingness to travel to various job sites as required * Level and compensation commensurate with experience Physical Requirements * Ability to work flexible schedules and overtime as required by operational needs * Ability to lift and carry a minimum of 50 pounds * Ability to safely operate a company vehicle * Ability to push or pull up to 400 pounds using a wheelbarrow * Ability to walk, stoop, bend, climb stairs and ladders * Ability to work on uneven terrain including concrete, gravel, dirt, and grass * Ability to work at elevated heights and in open structures * Ability to work outdoors for extended periods in varying weather conditions * Ability to wear required personal protective equipment (PPE) About Thompson Engineering Founded in 1953, Thompson Engineering provides quality assurance and professional services for construction projects supporting industrial, infrastructure, and community development. Our services include drilling, materials testing, construction inspection, chemistry laboratory services, engineering design, environmental assessments, surveying, geotechnical studies, and construction management. Today, Thompson Engineering is recognized for leadership on projects that define skylines, coastlines, and transportation networks across the Southeast. From project planning and design through construction and completion, we deliver innovative solutions to complex infrastructure and building challenges for industrial, commercial, transportation, federal, and municipal clients.

Job DescriptionDescription: About the Company: We provide specialized subcontracting and technical assistance services to support clients in the transport and aerospace industries. We work closely with clients to ensure that our solutions meet their needs and exceed their expectations. Our team members are motivated individuals that do remarkable things every day! Position Summary: AAA, United States, Inc. has partnered with a company in Little Rock, Arkansas that shapes the future by designing and building military aircraft, business jets and space systems. We are looking for experienced Quality Control B Inspectors who are seeking their next opportunity in a complex and ever-changing work environment! The Quality Control B Inspector inspects parts and components to known standards to ensure conformity of products including cosmetic acceptability. They will conduct interior shell component and in-process inspections as well as verify that parts and components conform to approved data. They will also properly document all inspections and verifications to support the build of the aircraft. Essential Functions: Interpret data, CATIA models, company standards, work instructions, and perform necessary calculations using shop math to conform detail parts, tooling, assemblies and installations and document results. Perform complete inspection of components, major assemblies, sub-assemblies, production tools or parts during manufacturing, modifications, repairs & installations to determine safety or conformity to approved data & company standards & specifications. Properly documents findings and actions taken. Interpret and verify per complex data, engineering change orders and governmental regulatory procedures and specifications and properly document results. Apply technical knowledge in the fields of manufacturing and assembly, plumbing, electrical, etc. to determine conformity, approval for return to service, & airworthiness. Use precision measuring guides, gauges and laboratory type instruments. Suggest dispositions of damaged or worn parts and the possibility of salvage based on company practices or procedures. Be familiar with relative FAA/EASA regulations and requirements. Be familiar with regulatory processes. Prepare necessary customer and/or company documents. Complete and maintain reports and records as required. Assist other personnel on specific job assignments as requested by Quality Management. Maintain a clean and organized work area. Complete tasks accurately and thoroughly. May perform inspections of incoming purchased parts and products. May perform inspections of outgoing parts and products being shipped from customer. Work in a safe manner in accordance with OSHA and company safety regulations/procedures. Requirements: High school diploma or equivalent. Two (2) years' experience in an aircraft or aeronautical environment. Must possess above average verbal, written skills, and interpersonal communication skills. Must possess well-developed critical thinking, logic, and analytical skills. Able to work from heights or small-enclosed areas for short periods with or without reasonable accommodation. Able to climb, stoop, bend, kneel, and/or work from unleveled surfaces with or without reasonable accommodation. Ability to read and interpret complex drawings, 3D models and specifications. Able to use precision measuring tools, gauges, and laboratory type instruments. Must possess computer literacy with the ability to learn new applications. Must be pro-active and team oriented. Pass vision testing, minimum 20/20 corrected, and with no limitations in color perception. Regulatory issued Airframe & Powerplant (A & P) license. Able to work unsupervised for short periods. Aircraft/aviation experience specific to the area of assignment (e.g., upholstery, cabinet, etc.)

Perform major inspections of the aircraft. Inspect modifications, alterations and repairs to the aircraft, components, major assemblies or sub-assemblies to applicable approved data and document their findings in accordance with FAA and company procedures. Make appropriate log book entries to document work performed by the repair station in accordance with FAA regulations. Interface with the maintenance floor supervisor, customer and FAA as required to accomplish their duties in a professional manner. Ensure safety of the product being serviced and the documentation of the maintenance being performed by the repair station. Job Duties & Responsibilities Accomplishes all work while following company and industry safety standards while maintaining the highest level of quality. Adheres to all FAA Regulations, the Repair Station Quality Control Manual (RSQCM), and all other approved data. Perform to company standards, work instructions, and perform necessary calculations using shop math to conform tooling, detailed parts, assemblies and installations. Performs complete inspection of components and production tools to determine safety or conformance to standards and requirements. Use precision measuring guides, gauges and laboratory instruments. Is familiar with FAR Part 145, 135, 91, 65, 21 and related A/C's rev. 1 Complete and maintain other reports and records as required. Accurately log computerized labor data collection for time and attendance tracking. Follows specific authorizations as listed on Inspection Authorization Letter. Contributes to a positive work environment while maintaining the utmost level of professionalism at all times. Able and willing to mentor others. Able to communicate technical information clearly to supervisory personnel, flight crews and customers. Works assigned shift and unscheduled overtime as-needed or requested. Ability to travel and perform AOG maintenance. Occasionally communicates directly with customers and vendors. Maintains a clean and organized work area at all times and adheres to company dress standards. Perform all other duties as assigned to support the efficient operation of the department and company Shift Friday- Sunday 7am-7:30pm Qualifications High school graduate or equivalent with additional courses in aircraft maintenance in recognized service or technical school programs. 3+ years aircraft related experience required 2+ years aircraft inspection experience preferred FAA Airframe and Powerplant Certificate required Good knowledge of FAA regulations as pertaining to aircraft maintenance. Must have required tools. Intermediate computer skills preferred. Turbine jet aircraft training and experience - Dassault Falcon Models preferred. FAA Inspection Authorization certification preferred Working Conditions Works in a climate controlled hangars. (Heated and Cooled) Occasionally works outside on tarmac in atmospheric weather conditions. Physical Requirements Ability to wear and utilize personal protective equipment Must be able to lift up to 50 pounds without assistance Must be able to lift and carry up to 100 pounds with assistance Comfortable in tightly enclosed areas, heights involving lifts and ladders, as well as, flying. Requires the ability to perform all physical functions of the job (hear, stand, kneel, walk, etc.)

JobID: 8801 JobSchedule: Full time JobShift: Day : As a 100% employee-owned contractor, when you work at Sundt, you're not just hiring on at a company, you're joining a culture. Because everyone at Sundt is part owner, you'll join a team of people who are deeply invested in their work. From apprentices to managers, we're passionate about the details and deliberate in everything we do. At Sundt we focus on building long-term prosperity for our clients, communities and employee-owners. We offer competitive pay, industry-leading benefits including a 401k and employee stock ownership plan, incentive programs for craft and administrative employees as well as training that focuses on your personal and professional growth. We're driven by skill, grit and purpose. Join us as we strive to be the most skilled builder in America Job Summary Basic Job FunctionsPosition is required to assist in the inspection, acceptance, and/or rejection of work performed in a particular discipline in compliance with applicable codes and/or specifications as dictated by quality programs and/or contract documents and specifications.Structural Inspection:Experience level must fall within the erection of structural steel. Must be able to work in elevated areas. Must have knowledge of AISC, AWS D1.1, and AWS D1.6 Codes. Must have knowledge of bolt?up inspection including bolt lot verifications using Skidmore?Wilhelm. Additionally, must have knowledge of architectural, insulation and lagging, grout and concrete placement, Epoxy anchor installation inspection. Must have CWI (Certified Welding Inspector) certification.Electrical and Instrumentation Inspection:Experience must fall in the installation of electrical and instrumentation components, including interconnecting wiring, cables, and tubing. Must be knowledgeable of ICEA, IEEE, ISA, NEC, NEMA, NESC, and NFPA Codes and standards.Mechanical Inspection:Experience level must fall in the setting and alignment of static and rotating equipment, equipment skids, coolers, tanks, and interconnecting process piping fabrication and installation. Must be able to use measuring tools such as micrometers, calipers, transits, etc. and be able to set up dial indicators and laser alignment devices.Piping Inspection:Experience level must fall in pipe installation inspection, including welding, supports, instrumentation, etc. Must have CWI (Certified Welding Inspector) certification. Key Responsibilities 1. Assists material handling personnel with required material storage and PM requirements as needed. 2. Communicates with others regarding inspections results and recommends corrective procedures. 3. Participates in activities to support the company's strategic planning efforts. 4. Participates in the preparation of Quality control ITP. 5. Performs control measuring and tests equipment. 6. Verifies the installation of the systems, components and equipment in accordance with the assigned discipline. Minimum Job Requirements 1. 1+ year construction practices 2. 1+ year in quality control inspection discipline 3. HS Degree Required 4. Proficient use of all Microsoft Office Suite programs Note: Job Description is subject to change at any time and may include other duties as assigned. Physical Requirements 1. Ability to wear personal protective equipment is required (including but not limited to; steel toed shoes, gloves, safety glasses, hearing protection, hardhat, vest, etc.) 2. May reach above shoulder heights and below the waist on a frequent basis 3. May stoop, kneel, or bend, on an occasional basis 4. May use telephone, computer system, email, or other electronic devices on a limited basis to communicate with internal and external customers or vendors 5. Must be able to comply with all safety standards and procedures 6. Occasionally will climb stairs, ladders, etc. 7. Required to use hands to grasp, lift, handle, carry or feel objects on a frequent basis 8. Will interact with people frequently during a shift/work day 9. Will lift, push or pull objects on an occasional basis 10. Will sit, stand or walk short distances for up to the entire duration of a shift/work day. Safety Level Safety-Sensitive Note: Jobs with the Safety-Sensitive designation are those that include tasks or duties that the employer reasonably believes could affect the safety and health of the employee performing the task or others such as operating a vehicle, operating equipment, operating machinery or power tools, repairing/maintaining the operation of any vehicle/equipment, the handling/disposal/transport of hazardous materials, or the handling/treatment/disposal of potentially flammable/combustible materials. Equal Opportunity Employer Statement: Sundt is committed to the equal treatment of all employees, and/or applicants for employment, and prohibits discrimination based on race, religion, sex (including pregnancy), sexual orientation, gender identity, color, age, disability, national origin, covered veteran status, genetic information; or any other classification protected by applicable Federal, state, or local laws. Benefit list: Market Competitive Salary (paid weekly) Bonus Eligibility based on company, group, and individual performance Employee Stock Ownership Plan & 401K Industry Leading Health Coverage Starting Your First Day Flexible Time Off (FTO) Medical, Health Savings, and Wellness credits Flexible Spending Accounts Employee Assistance Program Workplace Wellness Programs Mental Health Program Life and Disability Insurance Employee-Owner Perks Educational Assistance Sundt Foundation - Charitable Employee-Owner's program #LI-KW1