Quality inspector jobs in Jupiter, FL - 75 jobs

We are seeking to recruit a Surface Quality Inspector for our location in Jupiter, Florida Strong attention to detail by visually looking at the surface quality of polished optics by using both hands to hold the optic to look thru (transmission) and in reflection to perform the visual inspection of Ø 5mm to Ø 200mm parts. Perform a visual inspection of the optical (glass) lenses against applicable standards ( i.e. ISO10110 and MIL-PRF-13830) using a high intensity light source, or indirect lighting with eye loupes, and/or microscope to identify and find any surface defects (scratches, stains, chips, fractures, etc.) on the lens after polishing or coating. Use the applicable standard to determine if the depth/width of the defect is acceptable or rejected based on the drawing specification. Visual inspection of low/moderate (standard/commercial) grade surface quality requirements (80-50, 60-40 scratch dig equivalent) which are a commonly acceptable cosmetic standards. Perform the inspection of raw glass blanks with documentation and release of material to production. Must be able to use cleaning solvents (alcohol, acetone and others) with special cloth wipes to clean, wipe, and to dissolve and remove any contaminants from the lens before and after inspection. After inspection of the optics, must be able to wrap the lens to protect from scratches, stains, chips, etc. Must be able to follow written and verbal instructions in a reliable and consistent manner. Must accurately document the description of lenses that do not meet the surface quality requirements, segregate the nonconforming parts from acceptable lenses, and to protect the rejected lens before sending to rework (internally or externally) or transferring acceptable lenses to inventory. May use various measuring instruments to measure physical dimension (in mm and inches). Must be able to escalate observed or potential lens quality or process defects to team lead or department supervisor. Must be organized, meticulous and a conscientious worker to minimize mishandling. Lenses inspected are finished product to be built into assemblies that must be handled with utmost care. Maintain contamination control and cleanliness of the area at all times. Proper safety procedures and process controls will be followed at all times when working with solvents, sharp edges and high intensity light sources. Should be an independent worker who can be focused on their responsibilities under minimal supervision with handling and processing parts quickly and efficiently before sending the lenses to coating (outside process), inventory, or to the customer. Work instructions and inspection training to be provided but individual must be able listen and ask questions, refer to the instructions and notes taken, and retain the information provided to reference back. REQUIREMENTS: High School Diploma, some college preferred. General knowledge of reading mechanical or optical blueprints/drawings. Use of measuring equipment such a caliper or dial indicators (mm and inch units). General computer skills and aptitude. Experienced in an ISO 9000 quality system work environment is preferred.

**Country:** United States of America ** Onsite **U.S. Citizen, U.S. Person, or Immigration Status Requirements:** U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract. **Security Clearance:** None/Not Required Pratt & Whitney is working to once again transform the future of flight-designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we're seeking the people to drive it. So, calling all curious. Come ready to explore and you'll find a place where your talent takes flight-beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we'll welcome you into a tight-knit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that's evolving fast to the future. At Pratt & Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond? What is my role type? In addition to transforming the future of flight, we are also transforming how and where we work. We've introduced role types to help you understand how you will operate in our blended work environment. **What you Will Learn** Skills, systems, and processes critical to aerospace manufacturing within a state of the art facility. Interpretation/Application of tech data to aide in the disassembly and assembly of commercial & military jet engines Forklift, scissor lift, and other PIV trainings **Job Summary:** This is an amazing opportunity for an Assembly and Test Inspector for our Product Delivery Center. This is a 2nd Shift Monday -Friday 3:30pm to Midnight. There is a shift differential offered on 2nd shift. **What You Will Do** Use a wide variety of power and mechanical tools to perform functional checks on engine assembly and components Perform Dimensional and Visual inspections following standardized methods and established techniques. This process may involve surface plate work or standard measuring techniques to verify accuracy of parts, tools, gages, or other equipment. The Inspector will be accepting or rejecting material based on findings. Work from applicable written inspection procedures and engineering drawings. Work with other pertinent instructions to plan and perform dimensional and/or visual inspection on parts, tools, gages and other equipment. Accepting or referring material for rework or quality review based on findings. Use a variety of fixed and variable measuring instruments including automated measuring machines. Program instructions are well-defined will be checking dimensions and record results. Perform necessary mathematical computations to resolve extent of nonconformance and complete appropriate paperwork. Follow Proper procedures to perform in-line checks and verifications of dimensions and make sure that operation sheets are being followed. May be assigned to carry out tasks, not specifically listed, within the scope and skill level of this job description in support of department objectives and to develop individuals' skills. **What you Will Learn** Skills, systems, and processes critical to aerospace manufacturing within a state of the art facility. Interpretation/Application of tech data to aide in the disassembly and assembly of commercial & military jet engines Forklift, scissor lift, and other PIV trainings **Basic Qualifications:** High school graduate or GED 2 years formal training in power-plant mechanics and testing **Preferred Qualifications:** A&P License Experience working from complicated drawings, specifications, procedures, and instructions to fabricate, configure, install, remove/replace and set up a variety of power systems, components, modules, and associated equipment Experience working with Solumina, SFWF, or similar programs. Ability to obtain and maintain certifications to operate powered industrial vehicles **What We Offer** Medical, Dental, Vision and Life Insurance Health Savings Accounts (HSA) Short-term disability, long-term disability and New Parent Leave Savings Plan with Company Automatic Contribution and potential for a Company Match Employee Scholar Program (available upon hire date) Employee Assistance Program (EAP) Paid-Time Off includes: vacation days, sick/personal days, incentive vacation, birthday holiday (8) Company recognized holidays and (5) Holiday Shutdown days from Christmas to the New Year **Learn More and Apply Now!** What is my role type? In addition to transforming the future of flight, we are also transforming how and where we work. We've introduced role types to help you understand how you will operate in our blended work environment. This role is: Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance workers, as they are essential to the development of our engines. Candidates will learn more about role type and current site status throughout the recruiting process. For onsite and hybrid roles, commuting to and from the assigned site is the employee's personal responsibility. Pratt & Whitney West Palm Beach is a FAA regulated facility and as such under the U.S. Departments of Transportation's Federal Aviation Administration (FAA). This position is considered safety sensitive in accordance with FAA Guidelines. Candidate will be subject to drug and alcohol testing as a pre-employment contingency and also subject to ongoing random testing as an employee per FAA's regulation 14 CFR part 120, as well as 49 CFR part 40. **_As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote._** Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. _RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act._ **Privacy Policy and Terms:** Click on this link (******************************************************** to read the Policy and Terms Raytheon Technologies is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class.

Country: United States of America Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract. Security Clearance: None/Not Required Pratt & Whitney is working to once again transform the future of flight-designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we're seeking the people to drive it. So, calling all curious. Come ready to explore and you'll find a place where your talent takes flight-beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we'll welcome you into a tight-knit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that's evolving fast to the future. At Pratt & Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond? What is my role type? In addition to transforming the future of flight, we are also transforming how and where we work. We've introduced role types to help you understand how you will operate in our blended work environment. What you Will Learn Skills, systems, and processes critical to aerospace manufacturing within a state of the art facility. Interpretation/Application of tech data to aide in the disassembly and assembly of commercial & military jet engines Forklift, scissor lift, and other PIV trainings Job Summary: This is an amazing opportunity for an Assembly and Test Inspector for our Product Delivery Center. This is a 2nd Shift Monday -Friday 3:30pm to Midnight. There is a shift differential offered on 2nd shift. What You Will Do Use a wide variety of power and mechanical tools to perform functional checks on engine assembly and components Perform Dimensional and Visual inspections following standardized methods and established techniques. This process may involve surface plate work or standard measuring techniques to verify accuracy of parts, tools, gages, or other equipment. The Inspector will be accepting or rejecting material based on findings. Work from applicable written inspection procedures and engineering drawings. Work with other pertinent instructions to plan and perform dimensional and/or visual inspection on parts, tools, gages and other equipment. Accepting or referring material for rework or quality review based on findings. Use a variety of fixed and variable measuring instruments including automated measuring machines. Program instructions are well-defined will be checking dimensions and record results. Perform necessary mathematical computations to resolve extent of nonconformance and complete appropriate paperwork. Follow Proper procedures to perform in-line checks and verifications of dimensions and make sure that operation sheets are being followed. May be assigned to carry out tasks, not specifically listed, within the scope and skill level of this job description in support of department objectives and to develop individuals' skills. What you Will Learn Skills, systems, and processes critical to aerospace manufacturing within a state of the art facility. Interpretation/Application of tech data to aide in the disassembly and assembly of commercial & military jet engines Forklift, scissor lift, and other PIV trainings Basic Qualifications: High school graduate or GED 2 years formal training in power-plant mechanics and testing Preferred Qualifications: A&P License Experience working from complicated drawings, specifications, procedures, and instructions to fabricate, configure, install, remove/replace and set up a variety of power systems, components, modules, and associated equipment Experience working with Solumina, SFWF, or similar programs. Ability to obtain and maintain certifications to operate powered industrial vehicles What We Offer Medical, Dental, Vision and Life Insurance Health Savings Accounts (HSA) Short-term disability, long-term disability and New Parent Leave Savings Plan with Company Automatic Contribution and potential for a Company Match Employee Scholar Program (available upon hire date) Employee Assistance Program (EAP) Paid-Time Off includes: vacation days, sick/personal days, incentive vacation, birthday holiday (8) Company recognized holidays and (5) Holiday Shutdown days from Christmas to the New Year Learn More and Apply Now! What is my role type? In addition to transforming the future of flight, we are also transforming how and where we work. We've introduced role types to help you understand how you will operate in our blended work environment. This role is: Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance workers, as they are essential to the development of our engines. Candidates will learn more about role type and current site status throughout the recruiting process. For onsite and hybrid roles, commuting to and from the assigned site is the employee's personal responsibility. As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

INSPECTOR I: This position inspects construction development to ensure compliance with City Ordinance, the Florida Building Code, and outside agencies. Employees in this classification perform at a technical level and are responsible for inspecting all phases of construction to verify conformity with the approved plans and specifications. The objective is to enforce all local, state and federal laws, ordinances and regulations to ensure the safety and welfare of the public. This employee works closely with residents, business owners, contractors and developers. Excellent communication and customer service skills are required. INSPECTOR II/PLANS EXAMINER: This position reviews construction plans and specifications for construction development to ensure compliance with City Ordinance, the Florida Building Code, and outside agencies. Employees in this classification perform at a technical level and are responsible for reviewing plans at all phases of construction. The Inspector II ensures the construction plans conform with city ordinances, the Florida Building Code, and outside agencies prior to the issuance of the building permit. This employee works closely with residents, business owners, contractors and developers. Excellent communication skills and customer service are necessary. This position performs field inspections when necessary. INSPECTOR I: * Perform Inspections in accordance with the Florida Building Code. * Schedule inspection appointments with customers when requested. * Meet with customers to discuss and resolve code violations. * Return all phone calls and emails the same day. * Investigate complaints of work without permits, if necessary. * Investigate complaints of unsafe structures, if necessary. * Possess the ability to present cases to the Special Magistrate and Unsafe Structures Board, if necessary. INSPECTOR II/PLANS EXAMINER: * Performs plan review and site inspections for new and existing construction within the city, to ensure compliance with all applicable City, state and Federal code and regulatory requirements in their respective trades, e.g., structural, electrical, mechanical, plumbing. * Verifies compliance with approved building permits, plans and specifications; reviews and approves workmanship of completed projects. * Collaborates with independent contractors and subcontractors, engineers, architects, homeowners, and internal administrative support to ensure all required documentation is completed and submitted for approval of requested permits and licenses. * Reads and interprets blueprints and specifications for construction plans and designs, reviews proposed plans for conformance to applicable codes and regulations. * Investigates complaints regarding alleged code violations; evaluates and identifies code violations and delineates corrective measures. * Identifies compliance problems and issues code violations; meets with violators and general public to explain and interpret city codes and advises violator of expected time frame to correct infraction; performs re-inspection to determine if corrections have been made to achieve compliance. * Reviews, maintains, and updates all files, documents, records and reports of inspections activities and findings. * Communicates with Building Official on, code issues or regulatory requirements that have not been resolved. * Maintains current knowledge of trends and regulatory developments for application to functional areas under charge; attends annual continuing education courses for re-certification. * Provides assistance and support to inspectors with moderately complex issues. * Researches state and federal codes. SALARY INSPECTOR I: $56,160 - $87,480.00 Annually (Starting Salary based on experience) * High School Diploma or equivalent. * Possess a Florida driver's license with an acceptable driving record or be able to obtain one by date of hire. * Possess a current State of Florida License or Certificate of Competency as an A/C or Mechanical Contractor. * Must obtain a provisional certificate as a building inspector from the State of Florida Building Code Administrators and Inspectors Board within forty-five (45) days of appointment and must obtain a standard certificate as a building inspector from the above noted Board within one (1) year of date of appointment. * To be certified by Broward County Board of Rules and Appeals (BORA), applicant must meet at least one of the requirements outlined in Code Sections 104.16.3.1 through 104.16.3.4. SALARY INSPECTOR II/PLANS REVIEWER: $65,104.00 - $104,000.00 Annually (Starting Salary based on experience) 1.High School Diploma or GED. 2. Must meet the certification requirements of Section 104 of Chapter 1, Broward County Administrative Provisions for the 2020 FBC (6th Editions) 3.Must possess a valid Florida driver's license with an acceptable driving record or be able to obtain one by date of hire.Work environment involves everyday risks or discomforts which require normal safety precautions typical of such places as office or meeting and training rooms, e.g., use of safe workplace practices with office equipment, avoidance of trips and falls, and observance of fire and building safety regulations, and traffic signals when driving.

Job DescriptionDescription:Quality Inspector for Manufacturing (2nd Shift) - Join Our Growing Team! About Us: Decimal Engineering is a fast-paced, precision-driven manufacturing facility specializing in CNC machining and custom sheet metal fabrication for the aerospace, medical, automotive, electronics, and marine industries. With over 50 years of experience, we are committed to quality, innovation, and investing in cutting-edge technology. Why Join Us? Competitive Compensation & Benefits (medical, dental, vision, life insurance, 401k, paid vacation, holidays). Work with a Long-Tenured Team in a highly respected ISO 9001, AS9100, ITAR, and DFAR-certified facility. Career Growth & Training Opportunities in a state-of-the-art manufacturing environment. What You'll Be Doing: Conduct detailed inspections using precision measuring tools (micrometers, calipers, CMMs). Interpret design drawings & specifications to ensure compliance with quality standards. Perform raw material inspections and verify conformance. Inspect first-piece and in-process production to maintain high-quality standards. Approve finished products by confirming specifications, performing visual & measurement tests, and ensuring rework is completed correctly. Document inspection results accurately in reports and logs. Collaborate with production teams to address non-conformances and recommend corrective actions. Ensure compliance with ISO 9001 & AS9100 standards (FAIRS knowledge a plus). Assist with mechanical gauge calibration (experience a plus). #ZR Requirements:What We're Looking For: Experience in quality inspection within metal fabrication, machining, or related manufacturing industries. Proficiency in GD&T (Geometric Dimensioning & Tolerancing) and its applications. Ability to use precision hand tools (micrometers, calipers, etc.). Familiarity with CMMs (experience is a plus). Strong attention to detail & problem-solving skills with a sense of urgency. Ability to work independently & in a team-oriented environment with minimal supervision. Physical Requirements: Ability to sit or stand for extended periods and lift up to 50 lbs.

Full-time Description Quality Inspector for Manufacturing (2nd Shift) - Join Our Growing Team! About Us: Decimal Engineering is a fast-paced, precision-driven manufacturing facility specializing in CNC machining and custom sheet metal fabrication for the aerospace, medical, automotive, electronics, and marine industries. With over 50 years of experience, we are committed to quality, innovation, and investing in cutting-edge technology. Why Join Us? Competitive Compensation & Benefits (medical, dental, vision, life insurance, 401k, paid vacation, holidays). Work with a Long-Tenured Team in a highly respected ISO 9001, AS9100, ITAR, and DFAR-certified facility. Career Growth & Training Opportunities in a state-of-the-art manufacturing environment. What You'll Be Doing: Conduct detailed inspections using precision measuring tools (micrometers, calipers, CMMs). Interpret design drawings & specifications to ensure compliance with quality standards. Perform raw material inspections and verify conformance. Inspect first-piece and in-process production to maintain high-quality standards. Approve finished products by confirming specifications, performing visual & measurement tests, and ensuring rework is completed correctly. Document inspection results accurately in reports and logs. Collaborate with production teams to address non-conformances and recommend corrective actions. Ensure compliance with ISO 9001 & AS9100 standards (FAIRS knowledge a plus). Assist with mechanical gauge calibration (experience a plus). #ZR Requirements What We're Looking For: Experience in quality inspection within metal fabrication, machining, or related manufacturing industries. Proficiency in GD&T (Geometric Dimensioning & Tolerancing) and its applications. Ability to use precision hand tools (micrometers, calipers, etc.). Familiarity with CMMs (experience is a plus). Strong attention to detail & problem-solving skills with a sense of urgency. Ability to work independently & in a team-oriented environment with minimal supervision. Physical Requirements: Ability to sit or stand for extended periods and lift up to 50 lbs. Salary Description Hourly, Non-Exempt

The CMM Quality Inspector is responsible for setting up, inspecting and signing off on aerospace components utilizing CMM (Coordinate Measuring Machines) and bench plate equipment. Parts will be inspected to engineering drawings, customer purchase orders, industry standards and specifications. Role requires the ability to obtain a Secret clearance. This is a first shift / hourly / non-exempt position reporting to the Quality Manager. Primary Duties & Responsibilities: Operate CMM machine using established programs, as well as creating new programs using Calypso software. Perform dimensional inspection on product using CMM, calipers, micrometers and height gauges. Perform visual and dimensional inspection on product per procedures. Perform first piece inspection and in-process inspections. Maintain lot integrity. Ensure all First Article Inspection (FAI) packages are properly completed. Must comply with all applicable safety requirements, policies and procedures, while maintaining a clean, safe, and orderly work environment. Must participate in required training, medical monitoring, safety, and health evaluations and programs. Other duties as assigned. Knowledge and Skills: Strong background concerning the usage and care of precision measuring tools and equipment. Ability to effectively read and understand blueprints, engineering documents, purchase orders, inspection manuals and procedures. Strong metrology, blueprint reading, and GD&T interpretation skills. Must be familiar with AS9102 Form and First Article Inspection (FAI). Must have practical experience performing in-process and final inspections. Demonstrates an understanding of related aerospace ISO and AS requirements. Must have experience using various mechanical inspection tools, such as micrometers and calipers. Maintain accuracy and attention to detail at all times and complete tasks in a timely manner. Knowledge of dimensional, visual and mechanical inspection processes. Ability to work with mathematical concepts. Proficiency using Microsoft Word and Excel. Able to apply common sense understanding to carry out work instructions furnished in written, oral or diagram form. Deal with issues involving several concrete variables in standardized situations. Ability to work with little supervision and make intuitive decisions when general instruction is given. Ability to work effectively with others in a team environment. Verbal and written communication skills (in English) Required to twist, turn, kneel, stoop, bend, and use hands to handle or feel. Close vision, color vision, peripheral vision, depth perception, and ability to adjust focus. Capable of lifting/moving 35 pounds Experience and Education: U.S. Person status required GED or High School diploma required Machinist certificate is a plus Minimum of 3 years of CMM inspection experience in an aerospace manufacturing environment Location Profile: Located in Port Saint Lucie, Florida, Atlantic Precision Inc (API) is a premier Aerospace Machining & Build facility with a talented work force using the latest 3D printing metal and additive manufacturing technologies in its 50,000 square-foot facility. With decades of experience, API is trusted by OEMs in commercial aviation, military aviation, power generation and the marine industry to produce quality parts for both prototypes and production requirements.

RK&K's Construction Engineering Inspection (CEI) and Construction Management Division is hiring Senior Construction Inspectors in and around the Lake Okeechobee, FL area. As a Senior Construction Inspector with RK&K you will lead and strengthen our construction engineering and inspection business. Including highway, bridge, design / design-build projects. Opportunities for growth and training into construction management and office engineering careers. Essential Functions Assisting the Project Administrator in daily roadway inspection Ensuring contractor compliance alongside quality control Performing verification inspections and testing as required These tests and inspections include, but are not limited to: earthwork, asphalt, concrete, bridge and miscellaneous structures, toll facilities, lighting, signalization, environmental compliance, maintenance of traffic, etc. This position provides general supervision and instruction for the CEI Inspectors on the projects Required Skills and Experience High school graduate or equivalent plus four (4) years of experience in construction inspection, two (2) year of which shall have been in roadway construction inspection CTQP Concrete Field Inspector Level I CTQP Asphalt Roadway Level I and Level II CTQP Earthwork Construction Inspection Level I and Level II CTQP Drilled Shaft CTQP Final Estimates I FDOT Intermediate MOT IMSA Traffic Signal Inspector Preferred Skills and Experience BS in Civil Engineering from an accredited institution Previous senior roadway inspection experience Other Duties This job description indicates the general nature and levels of work, knowledge, skills, abilities, and other essential functions (as covered under ADA). It is not designed to cover or contain a comprehensive listing of all activities and duties required by the employee. Other duties are assigned as required . What We Offer RK&K offers excellent potential for career advancement and professional growth. We also offer attractive compensation packages commensurate with experience and a comprehensive benefits package including: Paid time off Tuition reimbursement Health, dental, vision, life, and disability insurances Matching 401(k) plan Paid Holidays Much, much more! Why RK&K? As a full-service engineering and construction management firm, RK&K gives you the opportunity to directly impact the communities in which we live and work. What sets RK&K apart is an award-winning culture that has fostered a spirit of collaboration and trust for over 100 years. To its clients, the firm delivers concepts, processes, and outcomes that are designed for success. RK&K has earned its reputation as a trusted partner, responsive employer, and community steward. Design your career at RK&K, Apply Today!

Mission Responsible for inspecting incoming, in-process and final production parts to drawing specifications. They will be responsible for inspecting finished firearms from outside vendors and in-house to company standards. They will also be responsible for cross training to help where the Quality needs are for, that time. Responsibilities Inspect and document findings for incoming, In-process and final inspection parts. Inspect firearms manufactured, assembled, or repaired in the manufacturing area or by outside vendors. Identifies and documents any mistakes or problems associated with the items being inspected. Maintains accurate records of all items inspected. Submits reports to the Quality Manager regarding quality and items inspected. Utilizes basic test equipment such as calipers, Micrometers, Height Gages, CMM, Keyence, Rockwell Testers, Progressively improves upon and maintains acceptable inspection numbers in accordance with Company standards. Always stays on task with assigned duties. Adheres to all employment policies/safety policies/practices required by law/established by Company. Wear all necessary Personal Protective Equipment directed by the Company at all times. Maintains and keeps workstation and department area clean. Complete all required paperwork timely and accurately. Adhere to all employment policies/safety policies/practices required by law/established by Company. Immediately report any maintenance and/or safety issues to supervisor Maintain respect, courtesy, a positive attitude and professionalism towards all co-workers and the Company. Other duties will be assigned, as required. Qualifications & Knowledge Required To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. These requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Proficient with standard measurement tools, height stands, calipers, micrometers, and optical comparators. Keyence, CMM calypso/zeiss (preferred) Understanding and knowledge of Geometric Dimensioning and Tolerances Experience in reading Engineer drawings. Interact effectively with a variety of people. General mechanical ability is required. Possess sound problem-solving skills to help facilitate solutions to problems identified during the inspection process. Proficient in using Excel, Word and Outlook Strong understanding of Trigonometry and Mathematics Able to do a full layout of dimensional features. Experience with ERP system use, preferred. Ability to follow directions and prioritize accordingly.

Who we are: Cosmetic Solutions is a leader in the development and manufacturing of scientifically proven, innovative personal care products. With a focus on, face, body, hair, OTC, and professional use formulations, we create some of the most cost effective, high quality and powerful products on the market. Providing world class services to up and coming businesses, large established brands, physicians, estheticians and other skin care professionals; we specialize in research & development, custom formulization, graphic design, manufacturing, packaging and delivery. Quality Assurance (QA) Inspector - Line Monitoring, Verification, and Clearance Job Summary: The QA Inspector is responsible for ensuring product quality throughout the manufacturing process, with a primary focus on real-time line monitoring, verification, and line clearance procedures. This role involves performing inspections, tests, and checks at various stages of production to ensure compliance with established quality standards, specifications, and regulatory requirements. The QA Inspector will proactively identify and document non-conformances, conduct thorough line clearances to prevent cross-contamination, and communicate issues to production staff and management. Key Responsibilities: Line Monitoring: Conduct regular, scheduled, and random inspections of production lines to ensure processes are being followed correctly. Monitor critical control points (CCPs) and quality control points (QCPs) to ensure they are operating within established parameters. Observe manufacturing personnel to confirm they are adhering to standard operating procedures (SOPs), Good Manufacturing Practices (GMPs), and safety protocols. Collect and log data related to process parameters, product attributes, and environmental conditions. Product and Process Verification: Perform in-process and finished goods inspections using a variety of tools and methods (e.g., visual checks, measurements, functional tests). Verify that raw materials, components, and packaging meet specifications before and during use. Conduct sensory evaluations (e.g., taste, smell, appearance) as required by product specifications. Audit production paperwork and documentation for accuracy, completeness, and legibility. Line Clearance Procedures: Perform comprehensive line clearances at the end of each production run or product changeover. Inspect the production line, machinery, and work area to ensure they are free of previous product, materials, and documentation. Verify that all non-conforming or rejected materials from the previous run have been properly removed and identified. Document the line clearance process thoroughly, confirming that all steps have been completed before the next product run begins. Work closely with production and cleaning staff to address any issues identified during the clearance process. Non-Conformance Management: Identify and isolate non-conforming products or materials immediately. Document all quality issues, deviations, and non-conformances accurately and in a timely manner. Initiate non-conformance reports (NCRs) and assist in the investigation of root causes. Collaborate with production and management to implement immediate corrective actions. Documentation and Reporting: Maintain detailed and organized records of all inspections, tests, and audits, including line clearance logs. Complete all required quality control forms, checklists, and logbooks. Generate daily, weekly, or ad-hoc reports summarizing quality performance and highlighting key issues. Assist in preparing documentation for internal and external audits. Training and Communication: Provide guidance and feedback to production staff on quality-related matters, including proper line clearance techniques. Effectively communicate quality issues and concerns to supervisors, managers, and other relevant departments. Participate in team meetings to discuss quality trends and improvement opportunities. Qualifications: Education: High school diploma or equivalent required; an associate or bachelor's degree in a technical or scientific field is a plus. Experience: 1-3 years of experience in a Quality Assurance or Quality Control role, preferably in a manufacturing environment. Experience with line inspection and line clearance procedures is highly desirable. Skills: Strong attention to detail and a high degree of accuracy. Familiarity with quality management systems (QMS) such as ISO 9001, HACCP, or GMPs. Excellent written and verbal communication skills. Ability to work independently and as part of a team. Basic computer skills, including proficiency with Microsoft Office Suite (Word, Excel). Ability to read and interpret technical drawings, specifications, and procedures. Physical Requirements: Ability to stand, walk, and perform physical tasks for extended periods. Good visual acuity, including color vision, to detect product defects and ensure line cleanliness. Must be able to lift and carry up to [Specify weight, e.g., 25 pounds]. Ability to work in a fast-paced manufacturing environment with varying noise levels. Cosmetic Solutions LLC. is committed to equal employment opportunity for all employees and applicants for employment without regard to age, color, creed, disability status, gender, national origin, race, religion, sexual orientation or veteran status, or any other legally protected status.

Job DescriptionBenefits: 401(k) 401(k) matching Bonus based on performance Company car Competitive salary Dental insurance Health insurance Opportunity for advancement Paid time off Vision insurance Job Summary: Pioneer Engineers, Inc. is seeking a skilled and experienced Senior Roadway Inspector to join our CEI team. This role involves advanced-level inspection duties for roadway, bridge, and infrastructure construction projects throughout the state of Florida. The successful candidate will ensure contractor compliance with FDOT standards, specifications, and safety regulations, while mentoring junior staff and maintaining accurate project documentation. Key Responsibilities: Conduct daily field inspections on roadway, bridge, and infrastructure construction activities. Ensure compliance with FDOT Standard Specifications, Design Standards, CPAM, safety protocols, and environmental requirements. Perform complex technical tasks in surveying, layout, field testing, and engineering computations. Monitor and guide junior inspectors and coordinate with the Project Administrator. Document construction progress, material usage, non-conformities, and testing outcomes. Prepare and maintain inspection reports, photographs, and field notes. Participate in punch lists, commissioning, and QA/QC activities. Communicate effectively with contractors, project managers, engineers, and stakeholders. Support final estimates and assist with project close-out procedures. Minimum Qualifications: High school diploma or equivalent (Associates or bachelors in civil engineering or construction management preferred). Minimum 5 years of experience in roadway and/or bridge construction inspection Proficiency in Microsoft Office and FDOT project platforms (e.g., PrC, MAC, SCOC). Strong verbal and written communication skills. Valid drivers license and clean driving record. Willingness to work night shifts, weekends, and holidays as needed. Required Certifications: CTQP Asphalt Roadway Level I & II CTQP Earthwork Construction Inspection Level I & II CTQP Concrete Field Technician Level I CTQP Concrete Field Inspector Level II (For Bridges) CTQP Pile Driving Inspection CTQP Drilled Shaft Inspection CTQP Final Estimates Level I ACI Concrete Field Testing Technician FDOT Intermediate Maintenance of Traffic (MOT) IMSA Traffic Signal Technician Level I Nuclear Radiation Safety Florida Stormwater, Erosion, and Sedimentation Control Certification Critical Structures Construction Issues Self-Study Course Benefits Competitive salary 401(k) with company match Performance-based bonus Company vehicle or vehicle allowance Company cellphone or cellphone allowance Vacation and Sick Time Off Paid Holidays Health, dental, and vision insurance Life Insurance Disability Insurance Opportunities for advancement

Title: Dock QC Inspector Reports to: QC Manager Type: Full-Time | Onsite | Non-Exempt Pero Family Farms is a market share leader with over a century of dedication, commitment and integrity. Operating since 1908, Pero is the farm trusted by retailers and consumers alike. We are a fully integrated farming operation, with departments that specialize in organic farming, logistics, global supply chain management, national sales operations, food processing operations, and strategic marketing functions. Our operation includes over 35,000 acres spanning across the East Coast of the United States from Florida to New York, with distribution and production facilities in several different states. We pride ourselves in maintaining a strong family heritage and tradition that has been dedicated to quality, innovation, and excellent customer service that has been feeding America's families for over a century. Our family's passion for farming remains unwavering, with a vision to continue the tradition for many generations to come, whilst maintaining the reverence and trust it has established with the American consumer. As we expand our offering to include an assortment of organic vegetable options; we have become one of the largest organic vegetable growers in the country and we are looking to grow our workforce family. Join us in continuing and strengthening our position as a market share leader dedicated and trusted by retailers and consumers alike. JOB SUMMARY Assure consistent product Safety and Quality by testing, measuring and verifying raw materials. Performance of procedures that comply with stated corporate mission and strategic plan, corporate policies, and customer product specifications. Requirements RESPONSIBILITIES AND DUTIES Color, Sizing and grade evaluation of fresh perishable produce Calibrations on weight scales, thermometers and all applicable testing tools or detectors G.M.P. monitoring of operation to assure food safe environment Color code enforcement; sanitation, organics handling, allergen control Hold and release program Rework Program Shelf-life evaluation and sensory testing as required Paperwork, filing, notifications and data entry for Team site/Quality System Other duties as required SKILLS Good communication skills, including basic written and spoken English, to ensure understanding of safety procedures and documentation Basic computer skills Microsoft Office: Excel, Word A working knowledge of English and basic math Ability to collaborate with management PHYSICAL & ENVIRONMENTAL CONDITIONS Required to stand, sit, walk for long periods of time Frequent use of hands for simple, firm grasping and writing Frequent bending, stopping, reaching, climbing Frequent lifting, carrying 5 pounds to 50 pounds Frequent use of cutting utensils (i.e. knives, peeler) Exposure to product fumes such as onions, peppers, etc. Exposure to varying temperatures of 45 degrees or less Exposure to chemicals such as chlorine, etc. Works overtime as required EDUCATION & EXPERIENCE Minimum High School education / G.E.D. preferred or applicable certification Understanding of Produce Standards, and or basic produce experience preferred Must be able to drive to outside locations for inspections; required for dock staff COMPANY BENEFITS/PERKS 401(k) Health, Dental, Vision Insurance and more Paid Time Off (PTO) The company (Pero) reserves the right to alter, amend, expand or contract these duties and responsibilities as the companies needs evolve.

Job DescriptionDescription: QUALITY CONTROL BENCH INSPECTOR Responsibilities include but are not limited to: Reading and adhering to the published Workscope, as revised. Performing Receiving Inspection of incoming engines to identify visual non-conformances on the engines as-received. Documenting discrepancies (Damage Report) and generating Non-Routines, Manila Tags or 227's as required to initiate the repair of the noted discrepancies per SOP 14-006 R1. Performing Incoming & Outgoing Inventory Inspection of LRUs. Perform EMU and/or piece part inspection of disassembled engines, identifying and documenting non-conformances. Recording the status of all inspected parts on the QC 227C (Unserviceable and Serviceable parts alike), and proper routing of parts to restore them to serviceable condition in a timely and accurate manner. Routing parts to Outside Vendors and accurately documenting identification data and work required in Quantum. Also responsible for overseeing maintenance actions in progress and documenting required data on maintenance forms as maintenance actions are accomplished. Minimum Job requirements: Minimum FAA “P” Certificated; 2 years Minimum CF6 engine experience; Ability to navigate the OEM Manuals and to read and understand technical data; must have working knowledge of the Quantum Operating System. Requirements: MINIMUM REQUIREMENTS: Must possess a valid FAA A&P or Powerplant Certificate Read & Write English Able to Read and Comprehend OEM Engine Manuals, IPC's, SPM's, AMM's and other Approved Data 2 Years' Experience on CF6 Engines (is a plus) Computer Skills Able to use MS Outlook (Email), Word & Excel Must be COACHABLE (Able to Listen, Learn and Follow Instructions) / Have a Good Attitude / 2 Years with CTS Engines ** Applicants must be U.S. Citizens or Permanent Residents to be considered, we don't have sponsor plans at the moment**

Quality technician Quality Inspector OVERVIEW: The Quality Technician is responsible for ensuring that all quality related documents are completed to allow for product approval and on-time delivery. ESSENTIAL DUTIES AND RESPONSIBILITIES: Setup And Monitor SPC Collecting Activities Release all Jobs Prior to Manufacturing Comply with ISO and Customers QC Standards, Procedures and Specifications Prepare First Article Inspection packages, IAW AS9102 Develop Quality Inspection Plans. Develop PFMEA, control plans, flow charts and any APQP, as required. Track and upkeep PPAP requirements Participate in root cause and corrective action items utilizing 8D methodology Train Quality Inspectors on proper inspection techniques Follow Routers Instructions Perform First Piece, In process and Final Inspections using CMM/Layout Inspection SUPERVISORY RESPONSIBILITIES: This job has no supervisory responsibilities. COMPETENCIES Language Skills Ability to read, analyze and interpret documents such as safety rules, operating and maintenance instructions and procedural manuals. Ability to write reports and correspondence. Ability to speak effectively before groups of customers or employees of the organization. Mathematical Skills Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. Reasoning Skills Ability to apply common sense, understanding to carry out instructions furnished in written, oral or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. EDUCATION, EXPERIENCE, and TRAINING: High School Diploma or general education degree (GED) and/or 5 years of experience in Quality Assurance. Working Knowledge of common Drawing Standards and Interpretation Knowledge of Inspection Methods and Techniques Knowledge of basic GD&T CERTIFICATES, LICENSES, REGISTRATIONS: There are no specific requirements for this position. COMPUTER SKILLS: Word Processing and Spreadsheet Software TRAVEL REQUIREMENTS: There are no specific travel requirements for this position. PHYSICAL DEMANDS - The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee must regularly lift and/or move up to 10 pounds. The employee must occasionally lift and/or move up to 100 pounds. The employee must frequently stand, walk, sit, use hands to finger, handle or feel, reach with hands and arms and talk or hear. The employee must occasionally climb or balance and stoop, kneel, crouch or crawl. VISION REQUIREMENTS: Snellen 14/18, (20/30) or Jaeger 2 - employee will be tested in at least one eye, either corrected or uncorrected Color Vision Requirements: Individuals shall be capable of adequately distinguishing and differentiating colors used in the method for which certification is required, the process being performed or inspection activity. Color Perception testing is required one time only. Note: Vision tests may be substituted for the options listed above providing the equivalence is verified and documented by a licensed optometrist or ophthalmologist. WORK ENVIRONMENT - The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. This position regularly works in an environment near moving mechanical parts. This position occasionally works in an environment with fumes or airborne particles. This position works in an environment with moderate noise level (Examples: business office with computers and printers, light traffic)

We are seeking to recruit a Surface Quality Inspector for our location in Jupiter, Florida Strong attention to detail by visually looking at the surface quality of polished optics by using both hands to hold the optic to look thru (transmission) and in reflection to perform the visual inspection of Ø 5mm to Ø 200mm parts. Perform a visual inspection of the optical (glass) lenses against applicable standards ( i.e. ISO10110 and MIL-PRF-13830) using a high intensity light source, or indirect lighting with eye loupes, and/or microscope to identify and find any surface defects (scratches, stains, chips, fractures, etc.) on the lens after polishing or coating. Use the applicable standard to determine if the depth/width of the defect is acceptable or rejected based on the drawing specification. Visual inspection of low/moderate (standard/commercial) grade surface quality requirements (80-50, 60-40 scratch dig equivalent) which are a commonly acceptable cosmetic standards. Perform the inspection of raw glass blanks with documentation and release of material to production. Must be able to use cleaning solvents (alcohol, acetone and others) with special cloth wipes to clean, wipe, and to dissolve and remove any contaminants from the lens before and after inspection. After inspection of the optics, must be able to wrap the lens to protect from scratches, stains, chips, etc. Must be able to follow written and verbal instructions in a reliable and consistent manner. Must accurately document the description of lenses that do not meet the surface quality requirements, segregate the nonconforming parts from acceptable lenses, and to protect the rejected lens before sending to rework (internally or externally) or transferring acceptable lenses to inventory. May use various measuring instruments to measure physical dimension (in mm and inches). Must be able to escalate observed or potential lens quality or process defects to team lead or department supervisor. Must be organized, meticulous and a conscientious worker to minimize mishandling. Lenses inspected are finished product to be built into assemblies that must be handled with utmost care. Maintain contamination control and cleanliness of the area at all times. Proper safety procedures and process controls will be followed at all times when working with solvents, sharp edges and high intensity light sources. Should be an independent worker who can be focused on their responsibilities under minimal supervision with handling and processing parts quickly and efficiently before sending the lenses to coating (outside process), inventory, or to the customer. Work instructions and inspection training to be provided but individual must be able listen and ask questions, refer to the instructions and notes taken, and retain the information provided to reference back. REQUIREMENTS: High School Diploma, some college preferred. General knowledge of reading mechanical or optical blueprints/drawings. Use of measuring equipment such a caliper or dial indicators (mm and inch units). General computer skills and aptitude. Experienced in an ISO 9000 quality system work environment is preferred.

**Country:** United States of America ** Onsite **U.S. Citizen, U.S. Person, or Immigration Status Requirements:** U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract. **Security Clearance:** None/Not Required Pratt & Whitney is working to once again transform the future of flight-designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we're seeking the people to drive it. So, calling all curious. Come ready to explore and you'll find a place where your talent takes flight-beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we'll welcome you into a tight-knit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that's evolving fast to the future. At Pratt & Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond? What is my role type? In addition to transforming the future of flight, we are also transforming how and where we work. We've introduced role types to help you understand how you will operate in our blended work environment. **What you Will Learn** Skills, systems, and processes critical to aerospace manufacturing within a state of the art facility. Interpretation/Application of tech data to aide in the disassembly and assembly of commercial & military jet engines Forklift, scissor lift, and other PIV trainings **Job Summary:** This is an amazing opportunity for an Assembly and Test Inspector for our Product Delivery Center. This is a 2nd Shift Monday -Friday 3:30pm to Midnight. There is a shift differential offered on 2nd shift. **What You Will Do** Use a wide variety of power and mechanical tools to perform functional checks on engine assembly and components Perform Dimensional and Visual inspections following standardized methods and established techniques. This process may involve surface plate work or standard measuring techniques to verify accuracy of parts, tools, gages, or other equipment. The Inspector will be accepting or rejecting material based on findings. Work from applicable written inspection procedures and engineering drawings. Work with other pertinent instructions to plan and perform dimensional and/or visual inspection on parts, tools, gages and other equipment. Accepting or referring material for rework or quality review based on findings. Use a variety of fixed and variable measuring instruments including automated measuring machines. Program instructions are well-defined will be checking dimensions and record results. Perform necessary mathematical computations to resolve extent of nonconformance and complete appropriate paperwork. Follow Proper procedures to perform in-line checks and verifications of dimensions and make sure that operation sheets are being followed. May be assigned to carry out tasks, not specifically listed, within the scope and skill level of this job description in support of department objectives and to develop individuals' skills. **What you Will Learn** Skills, systems, and processes critical to aerospace manufacturing within a state of the art facility. Interpretation/Application of tech data to aide in the disassembly and assembly of commercial & military jet engines Forklift, scissor lift, and other PIV trainings **Basic Qualifications:** High school graduate or GED 2 years formal training in power-plant mechanics and testing **Preferred Qualifications:** A&P License Experience working from complicated drawings, specifications, procedures, and instructions to fabricate, configure, install, remove/replace and set up a variety of power systems, components, modules, and associated equipment Experience working with Solumina, SFWF, or similar programs. Ability to obtain and maintain certifications to operate powered industrial vehicles **What We Offer** Medical, Dental, Vision and Life Insurance Health Savings Accounts (HSA) Short-term disability, long-term disability and New Parent Leave Savings Plan with Company Automatic Contribution and potential for a Company Match Employee Scholar Program (available upon hire date) Employee Assistance Program (EAP) Paid-Time Off includes: vacation days, sick/personal days, incentive vacation, birthday holiday (8) Company recognized holidays and (5) Holiday Shutdown days from Christmas to the New Year **Learn More and Apply Now!** What is my role type? In addition to transforming the future of flight, we are also transforming how and where we work. We've introduced role types to help you understand how you will operate in our blended work environment. This role is: Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance workers, as they are essential to the development of our engines. Candidates will learn more about role type and current site status throughout the recruiting process. For onsite and hybrid roles, commuting to and from the assigned site is the employee's personal responsibility. **_As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote._** Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. _RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act._ **Privacy Policy and Terms:** Click on this link (******************************************************** to read the Policy and Terms Raytheon Technologies is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class.

RK&K's Construction Engineering Inspection and Construction Management Division is hiring Senior Construction Inspectors in and around the Orlando Florida, FL area. As a Senior Construction Inspector with RK&K you will strengthen our construction engineering and inspection business while leading complex and routine inspections on projects including highway, bridge, design/design-build projects. Opportunities for growth and training into construction management and office engineering careers. Essential Functions Provide construction management support, including inspection and monitoring of construction structures to ensure compliance with safety regulations Fully engage in solving complex problems to provide technical evaluation and sound solutions Monitor the activities of other Inspectors Ability to communicate effectively across different platforms with project management, clients, stakeholders, and contractors Interface with clients, state and federal agencies, and other engineering disciplines on construction projects Recordkeeping and reporting as required Required Skills and Experience High school graduate or equivalent plus four (4) years of experience in construction inspection, two (2) year of which shall have been in roadway construction inspection Must have the following as required by the scope of work for the project: Qualifications CTQP Concrete Field Inspector Level I CTQP Concrete Field Inspector Level II (Bridges) CTQP Asphalt Roadway Level I and Level II CTQP Earthwork Construction Inspection Level I and Level II CTQP Drilled Shaft CTQP Final Estimates I FDOT Intermediate MOT Preferred Skills and Experience Previous roadway asphalt inspection experience Critical Structures Construction Issues certification FDOT Self Study Computer Based Training (e.g. MSE Wall Inspector) Other Duties This job description indicates the general nature and levels of work, knowledge, skills, abilities, and other essential functions (as covered under ADA). It is not designed to cover or contain a comprehensive listing of all activities and duties required by the employee. Other duties are assigned as required . What We Offer RK&K offers excellent potential for career advancement and professional growth. We also offer attractive compensation packages commensurate with experience and a comprehensive benefits package including: Paid time off Tuition reimbursement Health, dental, vision, life, and disability insurances Matching 401(k) plan Paid Holidays Much, much more! Why RK&K? As a full-service engineering and construction management firm, RK&K gives you the opportunity to directly impact the communities in which we live and work. What sets RK&K apart is an award-winning culture that has fostered a spirit of collaboration and trust for over 100 years. To its clients, the firm delivers concepts, processes, and outcomes that are designed for success. RK&K has earned its reputation as a trusted partner, responsive employer, and community steward. Design your career at RK&K, Apply Today!

Job DescriptionDescription: Title: Dock QC Inspector Reports to: QC Manager Type: Full-Time | Onsite | Non-Exempt Pero Family Farms is a market share leader with over a century of dedication, commitment and integrity. Operating since 1908, Pero is the farm trusted by retailers and consumers alike. We are a fully integrated farming operation, with departments that specialize in organic farming, logistics, global supply chain management, national sales operations, food processing operations, and strategic marketing functions. Our operation includes over 35,000 acres spanning across the East Coast of the United States from Florida to New York, with distribution and production facilities in several different states. We pride ourselves in maintaining a strong family heritage and tradition that has been dedicated to quality, innovation, and excellent customer service that has been feeding America's families for over a century. Our family's passion for farming remains unwavering, with a vision to continue the tradition for many generations to come, whilst maintaining the reverence and trust it has established with the American consumer. As we expand our offering to include an assortment of organic vegetable options; we have become one of the largest organic vegetable growers in the country and we are looking to grow our workforce family. Join us in continuing and strengthening our position as a market share leader dedicated and trusted by retailers and consumers alike. JOB SUMMARY Assure consistent product Safety and Quality by testing, measuring and verifying raw materials. Performance of procedures that comply with stated corporate mission and strategic plan, corporate policies, and customer product specifications. Requirements: RESPONSIBILITIES AND DUTIES Color, Sizing and grade evaluation of fresh perishable produce Calibrations on weight scales, thermometers and all applicable testing tools or detectors G.M.P. monitoring of operation to assure food safe environment Color code enforcement; sanitation, organics handling, allergen control Hold and release program Rework Program Shelf-life evaluation and sensory testing as required Paperwork, filing, notifications and data entry for Team site/Quality System Other duties as required SKILLS Good communication skills, including basic written and spoken English, to ensure understanding of safety procedures and documentation Basic computer skills Microsoft Office: Excel, Word A working knowledge of English and basic math Ability to collaborate with management PHYSICAL & ENVIRONMENTAL CONDITIONS Required to stand, sit, walk for long periods of time Frequent use of hands for simple, firm grasping and writing Frequent bending, stopping, reaching, climbing Frequent lifting, carrying 5 pounds to 50 pounds Frequent use of cutting utensils (i.e. knives, peeler) Exposure to product fumes such as onions, peppers, etc. Exposure to varying temperatures of 45 degrees or less Exposure to chemicals such as chlorine, etc. Works overtime as required EDUCATION & EXPERIENCE Minimum High School education / G.E.D. preferred or applicable certification Understanding of Produce Standards, and or basic produce experience preferred Must be able to drive to outside locations for inspections; required for dock staff COMPANY BENEFITS/PERKS 401(k) Health, Dental, Vision Insurance and more Paid Time Off (PTO) The company (Pero) reserves the right to alter, amend, expand or contract these duties and responsibilities as the companies needs evolve.

QUALITY CONTROL BENCH INSPECTOR Responsibilities include but are not limited to: Reading and adhering to the published Workscope, as revised. Performing Receiving Inspection of incoming engines to identify visual non-conformances on the engines as-received. Documenting discrepancies (Damage Report) and generating Non-Routines, Manila Tags or 227's as required to initiate the repair of the noted discrepancies per SOP 14-006 R1. Performing Incoming & Outgoing Inventory Inspection of LRUs. Perform EMU and/or piece part inspection of disassembled engines, identifying and documenting non-conformances. Recording the status of all inspected parts on the QC 227C (Unserviceable and Serviceable parts alike), and proper routing of parts to restore them to serviceable condition in a timely and accurate manner. Routing parts to Outside Vendors and accurately documenting identification data and work required in Quantum. Also responsible for overseeing maintenance actions in progress and documenting required data on maintenance forms as maintenance actions are accomplished. Minimum Job requirements: Minimum FAA “P” Certificated; 2 years Minimum CF6 engine experience; Ability to navigate the OEM Manuals and to read and understand technical data; must have working knowledge of the Quantum Operating System. Requirements MINIMUM REQUIREMENTS: Must possess a valid FAA A&P or Powerplant Certificate Read & Write English Able to Read and Comprehend OEM Engine Manuals, IPC's, SPM's, AMM's and other Approved Data 2 Years' Experience on CF6 Engines (is a plus) Computer Skills Able to use MS Outlook (Email), Word & Excel Must be COACHABLE (Able to Listen, Learn and Follow Instructions) / Have a Good Attitude / 2 Years with CTS Engines ** Applicants must be U.S. Citizens or Permanent Residents to be considered, we don't have sponsor plans at the moment**