Quality inspector jobs in Washington - 325 jobs

DEPT OF ENVIRONMENTAL QUALITY We are looking for results-oriented, driven individuals with a thirst for problem solving. At Arizona Department of Environmental Quality (ADEQ) our mission is to protect and enhance public health and the environment in Arizona. Through consistent, science-based environmental regulation; and clear, equitable engagement and communication; with integrity, respect and the highest standards of effectiveness and efficiency. Because Arizonans treasure the unique environment of our state and its essential role in sustaining well-being and economic vitality, today and for future generations. We are currently looking for employees who are committed to our Agency, passionate to excel in their career and engaged in our mission. Only this caliber of employee will be successful in driving our Agency towards accomplishing our mission ENVIRONMENTAL SCIENCE SPECIALIST 1 - 3 AIR QUALITY INSPECTOR Job Location: Address: 1110 W. Washington Street, Phoenix, AZ 85007 Air Quality Division Posting Details: Salary: ESS 1 $45K-$50K ESS 2 $50K-$60K ESS 3 $65K-$70K Grade: 20-22 Closing Date: Open Until Filled Job Summary: As an Environmental Science Specialist with the Air Compliance Unit, this position conducts inspections of sources to determine compliance with air quality laws, rules and regulation. This position may be available for remote work within Arizona (4 days per week in the office/hoteling). The State of Arizona strives for a work culture that affords employees flexibility, autonomy, and trust. Across our many agencies, boards, and commissions, many State employees participate in the State's Remote Work Program and are able to work remotely in their homes, in offices, and in hoteling spaces. All work, including remote work, should be performed within Arizona unless an exception is properly authorized in advance. Job Duties: Primary Responsibilities: • Conduct site visits, data collection, inspections, and investigations regarding air quality permitted facilities. • Review technical/program documents. • Communicate and document observations and conduct tests to determine compliance with environmental standards. • Writing reports and completing, formal/informal notices of compliance. • Provide technical assistance to the regulated community, staff, and the public pertaining to environmental impact and compliance. • Prioritize work assignments and work independently to accomplish projects. • Explain and apply air quality laws, rules, regulations. • Analyze test data to determine a facility's compliance status. Knowledge, Skills & Abilities (KSAs): • Ability to understand and interpret environmental rules and statutes; balance, prioritize and organize multiple tasks and complete assignments by applicable deadlines; synthesize feedback and adjust plans accordingly; and to summarize completed tasks and recommendations to senior staff through reports. • Skill in developing and writing technical documentation • Knowledge of State and Federal environmental regulations, principles and practices, chemical composition, structure and properties of substances and of the chemical processes and transformations they undergo in the environment, Agency policies and processes. Selective Preference(s): • Bachelor's degree in Environmental Science/Studies/Technology, Mathematics, Statistics, Chemistry, or Environmental/Chemical Engineering. • Level 1: Requires 0-2 years' experience • Level 2: Requires 2 years' experience • Level 3: 5+ years of experience (Master's degree in a related field may substitute for two years of experience. Doctorate in a related field may substitute for four years of experience) • Environmental Professional in Training required for Level 3, or the ability to obtain within a year of hire. Pre-Employment Requirements: If this position requires driving or the use of a vehicle as an essential function of the job to conduct State business, then the following requirements apply: Driver's License Requirements. All newly hired State employees are subject to and must successfully complete the Electronic Employment Eligibility Verification Program (E-Verify). Benefits: Among the many benefits of a career with the State of Arizona, there are: · 10 paid holidays per year · Accrual of sick and annual leave beginning at 12 and 13 days per year respectively for full-time employees · Paid Parental Leave-Up to 12 weeks per year paid leave for newborn or newly-placed foster/adopted child (pilot program). · A top-ranked retirement program with lifetime pension benefits · A robust and affordable insurance plan to include medical, dental, life, short-term and long-term disability · An incentivized commuter club and public transportation subsidy program · We promote the importance of work/life balance by offering workplace flexibility · We offer a variety of learning and career development opportunities By providing the option of a full-time or part-time remote work schedule, employees enjoy improved work/life balance, report higher job satisfaction, and are more productive. Remote work is a management option and not an employee entitlement or right. An agency may terminate a remote work agreement at its discretion. Learn more about the Paid Parental Leave pilot program here. For a complete list of benefits provided by The State of Arizona, please visit our benefits page Retirement: ASRS Lifetime Benefits Contact Us: Persons with a disability may request a reasonable accommodation such as a sign language interpreter or an alternative format by contacting *************. Requests should be made as early as possible to allow time to arrange the accommodation. The State of Arizona is an Equal Opportunity/Reasonable Accommodation Employer.

Key Responsibilities: •Mechanical and Cosmetic inspection •Provide Quality control activities including new product introduction •Provide inspection services for incoming goods, returns and assembly •Document non-conformances and report major quality issues to leadership •First Article inspection Skills and Experience: •It is essential that the successful candidate have solid inspection experience gained in a manufacturing environment. •Technically competent, able to read and interpret engineering drawings. •Independence & Teamwork: Ability to work autonomously as well as collaborate effectively with a team. •Attention to Detail: Capable of maintaining precision in a fast-paced environment while meeting deadlines. •Strong Communication Skills: Good verbal and written communication and numerical skills are essential. •Familiarity with Quality disciplines including 8D reporting, 5 Whys and the completion of corrective action reports. (also essential)

Summary Description: AeroTEC's AC & Test Site Ops Department provides operational and facility requirements to support Fabrication, Aircraft Maintenance, Quality, Flight Test Instrumentation Installation & removal, and site safety (EH&S/SMS). The AC & Test Site Ops Division is responsible for providing resources and facilities for aircraft maintenance, quality, manufacturing, instrumentation installation and equipment to support customer requirements The Quality inspector is responsible for carrying out physical inspections on the Flight Test Aircraft as well as signing the release for flight. This role requires the significant exercise of independent discretion and judgment in matters of significance. Job Duties and Responsibilities (Essential Functions): Carry out physical inspections on Flight Test Aircraft to identify damage or defects and to assess airworthiness and conformance to standards. Sign the release for flight form on aircrafts that pass Quality Inspection. Analyze information and evaluate results to choose the best solution and solve problems. Observe and certify conformity with system tests. Carry out daily audits related to shop floor practices or specific Quality System elements. Prepare and audit Aircraft documentation such as Technical logs. Administer non-conformance reports and snag reports. Conduct Authority audits with QA organization as needed. Perform Nondestructive testing (NDT) as needed. Participate in promoting and developing the AeroTEC Quality Culture. Complete special projects and miscellaneous tasks as assigned by manager. Qualifications Knowledge/Skills/Abilities: Strong knowledge in FAA regulations, Aviation Rules (FOD's, Safety, Quality, hazardous materials, Aircraft Marshalling), aerodynamics, aircraft electrical systems, materials science, aircraft maintenance, electrical testing, instrumentation, gas turbine and piston power plants. Good leadership (individual contributor) presence: Able to lead by example and live/work by company values. Ability to successfully contribute to a positive and productive work environment. Able to instill a sense of urgency in team members. Able to be patient and objective in difficult situations with different types of people. Good customer service tool box: Professional mannerisms, appearance and actions (self-confident and committed to high ethics). Strong follow-through, quick thinking and resourceful. Ability to remain calm, cool and collected in stressful situations. Strong sense of urgency to address and solve important issues. Good organizational, time management and prioritization skills: Able to multi-task, maintain focus on several different projects at one time and hit deadlines. Able to be flexible with attention and priority. Ability to work in a progressive, fast-paced environment (work well under pressure). Good analytical skills, with an ability to troubleshoot, problem-solve and effectively and efficiently make decisions. Good communication skills (oral, written) with customers. Act as an active listener, seeking to understand and then to be understood, articulating clearly and confidently. Good interpersonal skills, with the ability to build strong relationships at all levels. Ability to influence others as well as relate to individuals at all levels of the organization. Good project management skills, including the ability to take ownership for accomplishing assigned tasks. Results-oriented planner who ensures that goals are met. Able to set priorities and keep to projected schedules. Computer Skills: Comfortable and effective working in Microsoft Office, including Word, Excel, Outlook, and PowerPoint. Level Requirements (Minimum): Education College degree or equivalent experience. A&P License required. NDT Certification preferred. Experience 10+ years' experience in Aircraft release as a Quality Inspector in Experimental Flight Testing, maintenance, or pre-flight. Physical Requirements: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job: While performing the duties of this job, the employee is regularly required to talk and/or hear. The employee is frequently required to sit, stand; walk; use hands to finger, handle or feel; and reach with hands and arms. Must have the ability to sit or stand for long periods of time. The employee is occasionally required to climb or balance; and stoop, kneel, crouch or crawl. The employee must frequently lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. No travel required. This position must meet export control compliance requirements. To meet export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.15 is required. “U.S. Person” includes U.S. Citizen, Lawful Permanent Resident, Refugee, or Asylee. AeroTEC is an equal opportunity employer.

Job Description Under general supervision and reporting Quality Management in Quality Operations, The Quality Inspector is responsible for performing visual inspection operations including In-process, Final Inspection, and FAI's as appropriate. The Quality Inspector must be familiar with hand tools and inspection under magnification. The Quality Inspector will also assist in verification of test data and all other applicable data concerning components, and associated documentation and other duties identified by cognizant management. SIGN ON BONUS OF $2000.00 Job Responsibilities: Experienced quality individual in dimensional inspection of aerospace machined components Experience in performing FAI's - AS9102 Experience with hand measurement tools Knowledge of CMM Inspection process Knowledge and experience in GD&T (ASME Y14.5) Knowledge and experience with blueprint interpretation Perform final inspection and receiving inspection (Which includes dimensional, visual inspection, surface finish, and assembly inspection) Reads, interprets, and utilizes Quality policies, procedures, blueprints, and other documentation Process warehouse materials Rely on instructions and pre-established guidelines/procedures to perform the functions of the job Support positive corrective actions and identification of root cause Other duties as assigned. Required Skills Experienced quality individual in dimensional inspection of aerospace machined components Experience in performing FAI's - AS9102 Experience with hand measurement tools MS Outlook, and EXCEL experience Experience with hand measurement gages, conduct conventional inspection to engineering requirements Knowledge and experience in GD&T (ASME Y14.5) Knowledge and experience with blueprint interpretation Valid drivers license and auto insurance required. Additional Desired Skills: Prior practical experience and implementation of Quality inspection tools and equipment. Experience in RCCA, and problem solving General Requirements Ability to handle complex situations and solve complex problems Ability to work effectively under pressure to meet deadlines Ability to press and analyze technical and business information Ability to work in a team environment with strong communication skills (verbal and written), ability to interact via telephone, email with co-workers Ability to remain seated for up to 5 hours at a time Fluent English - reading and writing is required Professionalism, integrity, and exceptional attention to detail Strong independent decision-making skills; excellent analytical skills and professional judgment Excellent interpersonal, written, and verbal communication skills Must be able to simultaneously manage several objectives Must be detail oriented, organized, and self-motivated Additional Qualifications (Preferred): 3+ years' experience as a quality inspector or technician. 3+ years' experience in an aerospace manufacturing facility 3+ years' experience in inspection duties, FAI's GD&T, and b/p interpretation Proficient with Microsoft Office products Effective communication skills Detail oriented Any combination of education and experience may be considered The General Vision Acuity Test shall be performed by an Oculist, Optometrist, or other professionally recognized person. The following requirements shall apply. • Near Vision - Eyes meets Orthorater 8 (95% or Jaeger #2 at 12 inches) • Far vision - Eyes meets Orthorater 4 (76%) or Snellen Chart 20/50 • Color Perception - 6 of 9 Orthorater plates US or International citizenship or permanent residence status required depending on work location. Valid Driver's License Valid Auto Insurance WORKING CONDITIONS Productivity: Incumbents must perform work in an efficient, effective, and timely manner with minimal direction. Mobility: Incumbents are required to participate in assigned physical activities which may include light lifting and sitting for prolonged periods of time. Vision: Vision sufficient to read printed documents, computer screens, and observe behavior of others. Environment: Typical office conditions, directly working Quality management team, working with the SMS team, and external customers. Other Factors: Typical hours worked are Monday - Friday from 8:00 a.m. - 5:00 p.m. Incumbents may be required to work occasional extended hours and weekend overtime. The employee frequently is required to use hands or finger, handle, or feel objects, tools, or controls. The employee is occasionally required to stand; walk (approximately 1-2 miles a day); sit; reach with hands and arms; climb or balance; and stoop, kneel, crouch, or crawl. Employee will occasionally drive long distances to and from various suppliers as needed. The employee must occasionally lift and/or move up to 20 pounds. Specific vision abilities required by this position include close vision, distance vision, color vision, peripheral vision, and the ability to adjust focus. The noise level in the work environment is usually moderate to high. BENEFITS: 12 days paid vacation first year, increasing with service years 10 days paid sick time 11 paid holidays Healthcare insurance available: Medical, dental, vision, STD, LTD, critical illness, life insurance for self and dependents Champ Plan Wellness and Health Free to employees working minimum 20 hours/week with anticipated $30k/annual earnings Participation increases net take home pay $$$ in most instances Free wellness initiatives Free tele-health Free and discounted RX Auto enrollment (unless tax elections result in negative impact) Eligible on the 1st of the month following 30 days of continuous employment requires monthly 10-minute wellness activity participation 401k retirement savings with match Eligible on the first (1st) of the month following 90 days of continuous employment 100% match of 1st 3% contribution 50% match of next 2% contribution IMMEDIATE VESTING Company-provided cell phone, laptop, mobile wi-fi (for business use only) Regular Hourly rate for travel time Direct Pay Travel arrangements for flights, hotels and rental cars Travel Reimbursements direct deposited with each payroll Federal rate Mileage reimbursement (.70/mile 2025) when driving personal vehicles on company business Per diem reimbursements for meals and incidentals Overnight trips - Up to $75 Leaving home after 4 pm $40 Federal rate mileage reimbursement (.70/mile 2025) when driving personal vehicles on company business Direct Pay Travel arrangements for flights, hotels and rental cars Travel Reimbursements direct deposited with each payroll Per diem reimbursements for meals and incidentals Overnight trips - Up to $75 Leaving home after 4 pm $40 $1500 EMPLOYEE REFERRAL BONUS Initial $750 paid upon hire of qualified referred employee (rehires excluded) Additional $750 paid upon referral's full completion of 90 days' employment Pay Range $25.00 -$40.00 per hour, please note that the salary information is a general guideline only. Trigo ADR considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as market and business considerations when extending an offer. Company Overview TRIGO ADR Americas is the leader in the Aerospace & Defense Industry providing global Supplier Delivery Assurance, Supplier Development and Quality Management Services. Trigo provides a fully integrated service solution to optimize Supplier performance through an embedded “boots on the ground” business model to drive systemic changes that enhance Supplier Quality and Supplier Delivery performance. We work as an extension of our Customers to build and maintain supplier and customer collaboration to ensure improved results and provide visibility throughout the supply chain. Trigo's team of dedicated Delivery Assurance Specialists, Supplier Development Specialists, Supplier Quality Engineers and Program Managers support hundreds of Customers and are deployed to thousands of Suppliers worldwide focused on achieving On-Time and On-Quality Delivery results. TRIGO ADR Americas is an Equal Opportunity Employer, including disabled and veterans, and may require US Citizenship for employment on certain defense contracts subject to ITAR restrictions. All qualified candidates will receive consideration. Except where otherwise provided by law, selection will be made without regard to, and there will be no discrimination because of race, religion, color, national origin, sex, political affiliations, marital status, non-disqualifying physical or mental disability, age, sexual orientation, gender identity, genetic information, membership or non-membership in an employee organization, or on the basis of personal favoritism or other non-merit factors. . Powered by JazzHR bDm4CbBgHH

Requirements Requirements Familiarity with AWS D1.1/AWS D1.2 weld inspection Strong organizational and communication skills Ability to manage change along with competing priorities Fluency in English with excellent written and oral skills Proficiency in standard Office computer applications CWI certification is a plus Qualifications 1+ years' experience in quality control Minimum high school diploma or vocational degree Experience in steel fabrication or general construction Ability to read and understand engineering drawings and shop drawings Physical Requirements/Work Environment This position requires moderate physical activity in a manufacturing environment. While performing the duties of this job, the employee is regularly required to have full range of mobility in upper and lower body, able to reach overhead, able to work in various positions, including, but not limited to, stooping, standing, bending over, sitting, kneeling, squatting; use hands to handle, or feel objects, tools or controls; reach with hands and arms; climb stairs; balance for extended periods of time. Be able to lift 50 pounds of weight when required. The employee will be exposed to shop elements such as noise, dust, fumes, and odors. Compensation $28.00 - $38.00 hourly, depending on experience and qualifications. Benefits Health Benefits, including medical, dental and vision Company paid and supplemental life insurance Short-term disability Long-term disability Additional voluntary benefits Paid vacation, paid sick leave and paid holidays 401(k) retirement plan, with employer match Employee Referral Bonus Program Applicant Notes Applicants must provide complete work history with employer references for last three to five years All employees are subject to a pre-employment background check and pre-employment and random drug testing. Due to working in / being exposed to a safety sensitive environment, THC testing will occur as part of all drug screens. Location This position is based out of the Dogwood Factory Office at 500 Metcalf st, Sedro-Woolley, WA 98284. There may be travel to the Dogwood Everett, WA Factory as needed. Application Assistance If you are an individual with a disability and need a reasonable accommodation in the application or hiring process, please contact Dogwood's HR department at ************** or ************************. Equal Employment Opportunity: All qualified applicants will receive consideration for employment without regard to race/ethnicity, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, age, or any other status protected by law. For more information about our commitment to equal employment opportunity, please see this government poster: Know Your Rights: Workplace Discrimination is Illegal. Disclaimer: Although the Company has attempted to accurately and thoroughly describe this position, the Company reserves the right to change the same, including to change, add to or subtract from the duties outlined, within the sole discretion of the Company, at any time, with or without advance notice. In order to meet company deadlines, work in excess of 40 hours per week may be required from time to time. PM22 Salary Description $28.00 - $38.00 hourly, depending on experience

At BRINC, we are redefining public safety with an innovative ecosystem of life-saving tools. Our journey started with the development of drones and ruggedized throw phones, designed to access unsafe areas and establish communication to de-escalate situations. Today, we've expanded into creating and deploying 911 response networks, where drones are dispatched to 911 calls to provide real-time visual data, enhancing safety and enabling de-escalation-focused responses. Our cutting-edge solutions are utilized by over 600 public safety agencies across America and the company has raised over $150M from investors, including Index Ventures, Motorola Solutions, Sam Altman, Dylan Field, Mike Volpe, Alexandr Wang and more. At BRINC, we are committed to recruiting the world's best talent to join us in our mission to support first responders in saving lives. About this Role: BRINC is seeking a Quality Inspector to ensure that every product we ship meets the rigorous quality standards our customers need as they utilize our drones to complete life-saving missions every day. As a Quality Inspector you will be responsible for performing in-process inspection as well as final inspection for all BRINC products. You are empowered to identify defects, bring these to the attention of the technician who built the product, require the defect to be repaired/corrected, and evaluate/fix any process gaps that resulted in the defect being generated in the first place. You will partner with the Quality, Test, and Design Engineering teams to identify critical-to-quality characteristics as well as the measurement method used to evaluate them. Key Responsibilities: Use metrology equipment to ensure product performance for highly-complex hardware, including PCBAs, optics, harnessing, soldering, mechanical fastening, adhesives, etc. Report nonconformances when defective material is found and establish a process for containing all suspect material. Read/interpret work instructions and drawings to define and perform quality inspections. Perform critical in-process and final inspections for assembled products and subassemblies, including optics, PCBAs, precision machined components, and composite components. Develop SOPs for other inspectors (or technicians) to follow for day-to-day tasks. Support Material Review Board discussions to determine product dispositions for nonconforming material. Partner with manufacturing technicians to implement sustainable corrective actions when defects are root caused.. Qualifications: 2+ years of experience in a technician role within aerospace, defense, or related industries. 2+ years of experience reading/interpreting work instructions, engineering drawings, and/or inspection plans 2+ years of experience using hand tools 2+ years of experience using Calibrated tools, ie height gauges, calipers, micrometers, torque wrenches, etc. Strong analytical and problem-solving skills Preferred Skills Associate's Degree or higher Experience with Material Review Board (MRB) activities ASQ Quality Inspector certification or similar Certified inspector to IPC-610 Certified inspector to IPC-620 Familiar with automated inspection equipment, including Romer arms, comparators, CMMs, and other metrology software based inspection methods Part 107 Remote Pilot Certificate 2+ years of experience with Root Cause Corrective Action (RCCA) Understanding of SCAR and Nonconformance reports (NCR) BRINC Culture Values: Try the hard stuff Be innovative - Invent the future Move fast Listen to end-users Strive for excellence Don't build a dystopia Be frugal Save lives through technology If you're interested in this role and in joining BRINC, we hope you'll apply. We'd love to review your application and get to know more about you! BRINC is proud to be an equal opportunity employer that is resolute in cultivating an environment that promotes safety, diversity, inclusion and equity. We're committed to hiring the best talent - regardless of race, creed, color, ancestry, religion, sex (including pregnancy), national origin, sexual orientation, age, citizenship status, marital status, disability, gender identity, genetic information, veteran status, or any other characteristic protected by applicable laws, regulations and ordinances - and empowering every employee so they can do their best work. If you have a disability or special need, please let our recruiting team know - we strive to provide appropriate accommodation and assistance. Benefits and perks listed below may vary based on the nature of your employment with BRINC and/or the country within which you work Comprehensive medical, dental and vision plans for our employees and their families 401K plan Maternity and paternity leave Flexible Time Off (Exempt) / Paid time off (Non-Exempt) Flexible work environment Orca pass (for those in Puget Sound) Free parking (Seattle office) Free snacks, drinks and espresso (Seattle office)

Job Description The Composites Quality Inspector is responsible for overseeing daily activities and workflows related to Composites Quality Assurance at Karman Space & Defense. his role ensures all QA efforts are conducted in compliance with Karman's Quality Management System and AS9100 requirements. ABOUT US Karman Space & Defense provides concept-to-production solutions for mission-critical systems on spacecraft, launch vehicles, missiles, hypersonics, and integrated defense systems. We believe that solving the industry's most complex and mission-critical challenges requires relentless determination and a willingness to push the boundaries of possibility. Karman Space & Defense brings to bear unparalleled production capabilities, unmatched engineering expertise, and unflinching analysis to render the impossible, possible. COMPENSATION & BENEFITS Medical, Dental, Vision Company Paid Life Insurance 401(k) Retirement Savings Plan Paid Time Off (PTO) Paid Holidays Tuition Reimbursement* WHAT YOU WILL DO Ensures that Karman's composites manufacturing meets all quality requirements, drawings, and specifications Provides quality support and process oversight for composites layup technicians, including inspection of workmanship, material handling, kit cut and layup, documentation, inspection reports and work flow Ensures that materials are received, stored, handled, and tracked appropriately Tracks all composite manufacturing and inspection documentation, documents all non-conformances, initiates and supports corrective actions and investigations Generates AS9102 First Article Inspection Reports Coordinates with suppliers to correct quality related issues Performs and supports quality and regulatory audits of the Composites Shop Works with engineering staff to support process definition and new product development WHAT WE ARE LOOKING FOR Required Education: HS Diploma Hands-on experience in aerospace composite layup desirable Inspection experience desirable Must be a U.S. Citizen SKILLS Highly organized. Strong written and verbal communication skills. Ability to read and interpret technical drawings and specifications. Comfortable using computers to look-up and input information. EQUAL OPPORTUNITY EMPLOYER Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities. The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. Karman is committed to equal employment opportunity. We will not discriminate against employees or applicants for employment on any legally recognized basis (“protected class”) including, but not limited to race; color; religion; genetic information; national origin; sex; pregnancy, childbirth, or related medical conditions; age; disability; citizenship status; uniform servicemember status; or any other protected class under federal, state, or local law. Our management is dedicated to ensuring the fulfillment of this policy with respect to hiring, placement, promotion, transfer, demotion, layoff, termination, recruitment advertising, pay, and other forms of compensation, training, and general treatment during employment.

Full-time Description Join us in the exciting role of providing a Construction Quality Control Inspector to provide technical services for the Tahoma National Cemetery at Kent, WA. This role provides comprehensive construction management support for the Tahoma National Cemetery major construction project, which develops 15 of the 36 undeveloped acres remaining at Tahoma National Cemetery, adding an additional 15 years of burial services for eligible veterans in the Puget Sound region of Washington state. The project provides 27,000 gravesites, supporting infrastructure, and a new honor guard building, satellite public restroom, minor repairs, and access roads, parking, and signage. Work Period: This position is a full-time position for two years, plus two optional 3-month extensions. Essential Functions: Inspections & quality control: Conduct daily site and building inspections; document defects, code violations, improper materials/techniques, and punch list items; observe contractor/subcontractor work for compliance and report findings to the SRE. Submittals, RFIs & approvals: Review contractor submittals, RFIs, samples, test/inspection reports, and installed work for technical compliance; recommend approval/disapproval and provide written feedback to the SRE. Schedule, progress & delays: Monitor schedules and daily activities; identify progress delays or slippage and recommend corrective actions to maintain the progress schedule. Contract changes & payments: Assist with change documentation (estimates, cost reviews, negotiations, change order packages) and review contractor payment requests, cost breakdowns, and quotations for SRE recommendation. Reporting & recordkeeping: Prepare and submit daily/weekly reports (work, manpower, safety), maintain complete job files, marked up plans/as builts, deficiency logs, photos, and records to support inspections, disputes, and government review. Safety & compliance: Perform weekly safety inspections, document environmental/EPA conditions, and report safety/compliance issues to the SRE. Materials, testing & commissioning: Maintain inventory of materials, supplies, and equipment; review material samples and cost loadings; coordinate special testing, commissioning, and utility inspections. Meetings & coordination: Attend/lead project and coordination meetings to resolve issues, manage phasing/traffic interruptions, and liaise with utilities, contractors, and VA representatives. Closeout & availability: Assist with final inspections, contract close-out activities, and be available for after-hours or weekend work as required; must communicate fluently in English. Benefits Package: Paid Time Off Paid Federal Observed Holidays Medical Insurance Dental and Vision Insurance Employee Paid Supplemental Insurance (Short Term Disability, Long Term Disability, Life, Accident, and Critical Illness) 401K - employer matching of up to 5% Equal Employment Opportunity (EEO): It has been and will continue to be a fundamental policy that GoldenWolf, LLC., is an Equal Opportunity Employer, including veterans and individuals with disabilities, committed to maintaining world-class facilities through technical excellence and innovation. About the Company: GoldenWolf is a Service-Disabled Veteran-Owned, Women-Owned Small Business that provides comprehensive facility management and support services to federal agencies. The company specializes in delivering a wide range of professional services, including facilities condition assessments, quality assurance, construction management, strategic planning, and technical support across civilian and defense sectors. We invite you to visit the GoldenWolf website at ****************** to learn more about the organization and explore other career opportunities. Requirements Education: Bachelor's degree in construction management, engineering, or Architecture from an accredited University. Qualifications: Minimum 2 years of experience working with a construction management team. Experience with observing and inspecting construction is required. Current OSHA 30 certification Certified Construction Manager (CCM) will receive greater consideration. Experience with Kahua, Primavera, and other construction management systems. Able to pass a security background check. Proficiency in Microsoft Office. Excellent verbal and written communication skills are necessary to effectively communicate with project stakeholders, contractors, and government personnel. The ability to write clear and concise reports is essential. Salary Description $90,000.00 - $120,000.00

Description Who We Are At nLIGHT, we are constantly on the cutting-edge of laser technology in a massively growing market. We are a leading provider of high-power semiconductors and fiber lasers for industrial, microfabrication, and aerospace & defense applications, to name a few. Our lasers are changing not only the way things are made, but also changing the things that can be made. Headquartered in Camas, Washington, nLIGHT is a publicly listed company (NASDAQ: LASR). About the Role nLIGHT is seeking a Quality Technician to join our quality team located in Camas, Washington. This role supports the quality needs of the fiber laser manufacturing line and will manage disposition of non-conforming parts. This position will also manage the calibration program and coordinate the quarterly calibration events. Shift: Monday - Friday 8:00AM to 5:00PM, plus overtime as necessary Roles and Responsibilities Performs inspection on equipment such as regular preventative maintenance and Calibration. Provides trouble shooting to the equipment issues. Maintains and updates other metrology tools Maintains the IQA labs for cleanroom, safety, 5S, ESD etc. standards Completes First Article Inspection Reports for manufactured and purchased items (FAIR). Manages to reduce non-conforming material (NCM) through timely disposition, transactions, and reporting. Performs incoming inspection and product in-line inspection per documented requirements Generates incoming inspection documentation. Leads the cycle count in the IQA teams Updates and assists with managing the IQA Master Log and IQA records. Qualifications 3+ years of experience as a Quality Inspector, or Manufacturing/Process Technician, or as Senior Quality Inspector. ERP system transactions knowledge is required. Ability to read and interpret Engineering Drawings. Experience with measurement of precision mechanical and optical components/assemblies, using micrometers, calipers, go/no-go gauges, microscopes, optical comparators, etc. preferred. Experience with inspection of components for laser diode assemblies and fiber optics preferred. Proficient in the use of MS Office programs such as Excel, Word, etc. Ability to work with minimal supervision. Local travel may be needed for up to 15% of the time. nLIGHT is proud to offer comprehensive COMPENSATION AND BENEFITS: Starting pay depends on qualifications: Quality Technician I- $22.37 to $28.00 Quality Technician II - $23.93 to $31.10 per hour Senior Quality Technician III - $26.00 to $33.80 per hour Shift differentials are paid at the rate of 10% for hours worked between 5:30PM and 12:00AM and at 15% for hours worked between 12:00AM and 5:30AM Target Cash Bonus with potential payout of up to 2% of earned wages 120 hours of paid Vacation per year, plus paid Sick Leave and 10 paid Holidays Eligible for health benefits on the 1st day of the month after your start date Medical, Dental and Vision Benefits, including prescription and orthodontia with employee-paid premiums as low as $40.00 per pay period Company paid Short-Term and Long-Term Disability, and Life & AD&D Insurance Employee Assistance Program Aflac Supplemental Insurance Flexible Spending and Health Savings Accounts Employee Stock Purchase Plan 401(k) with company match and immediate vesting Jury Duty and Bereavement Leave Pay Tuition Assistance Pet Insurance nLIGHT is subject to US Export Control regulations. To qualify for this position, you must be a US Person (that is, a US citizen, lawful permanent resident, or protected individual granted asylum or refugee status). Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, or age. For more information about our commitment to equal employment opportunity, please see this government poster: Know Your Rights: Workplace Discrimination is Illegal. If you are an individual with a disability and need a reasonable accommodation in the application or hiring process, please contact Human Resources at ************** or [email protected]. E-Verify Participation: nLIGHT participates in the E-Verify program. This employer will provide the Social Security Administration (SSA) and, if necessary, the Department of Homeland Security (DHS) with information from each new employee's Form I-9 to confirm work authorization. For more information, please review the following notices: E-Verify Participation Poster Right to Work Poster

The QC Inspector's main responsibility is to inspect, accept or reject work performed in a particular discipline in compliance with applicable Codes and specifications. Discipline can be civil, structural, mechanical or piping. This posting is to gather a qualified pool of candidates as the need arises to hire for various maintenance and turnaround projects. Once an opening occurs, we will reach out to qualified candidates. Essential Functions Actively support the Company's commitment to safety and its “Core Values.” Represent the Company at all times with high moral standards while adhering to the Company's “Code of Business Conduct and Ethics.” Responsible to observe and follow all safety procedures and regulations at the job-site. Perform inspections and witness tests as required. Prepare reports and quality records in compliance with procedures. Coordinate areas of QC work with other department's work, such as, start-up, engineering, process, etc. Perform receipt inspections of material for work area in conjunction with material control staff as required. Perform system verification on completed systems to assure correct installation per design specifications. Control measuring and test equipment, as required to insure accuracy. Perform additional assignments per supervisor's direction. Qualifications 2+ year's minimum experience. AWS CWI minimum required. API 653 certification preferred. Should be familiar with ASME Sec. VIII, Sec. IX, B31.1, B31.3, API ************* Codes Strong understanding of corporate and industry practices, processes and standards and their impact on project activities. Excellent oral and written communication skills; good computer skills including MS Word and Excel. Washington law requires pay information in job postings. The typical hiring range for this position in Washington is shown below. The pay rate will depend on the successful candidate's qualifications and prior experience, specific skill set, geographic location, internal equity, and other factors influencing pay. As such, an actual salary may fall closer to one or the other end of this range, and in certain circumstances, may fall outside the listed hiring range. Hiring range: $45.62 to $52.13 per hour Full range for this position, available over time: $45.62 to $52.13 per hour In addition, full-time employees are offered a comprehensive benefits package, including medical, dental and vision plans covering eligible employees and dependents, disability benefits, life and AD&D insurance, an employee assistance program (EAP), a 401(k) plan with company match, an employee stock purchase plan (ESPP), a robust wellness program and adoption assistance. At Matrix, we are dedicated to building a diverse, inclusive, and authentic workplace. We encourage all whose experience aligns with the listed qualifications to apply and explore joining our organization. EEO/M/F/Disability/Vets/Affirmative Action Employer We are an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, national origin, age, genetic information, marital status, disability, veteran status, or other legally protected characteristic or category.

Job Description Our client, a successful second-generation independent family business, is experiencing significant growth and is seeking a highly skilled Lead Inspector to join their team. Specializing in fire protection systems, the company has expanded its workforce from 25 to 42 employees in the last five years and is now looking for an experienced professional to help them continue this momentum. As a Lead Inspector, you will be responsible for inspecting fire alarm and related systems across various structures, including multifamily residences, mixed-use commercial properties, assisted living facilities, and high-rise buildings. Your role will also involve mentoring an apprentice, playing a key part in developing the next generation of experts in this field. With most accounts located north of I-90, you will have the opportunity to call on multiple accounts per day if they're small or manage larger, multi-day inspections. Additionally, you will occasionally collaborate with other trades working on related systems. The company offers a guaranteed 80 hours per pay period, along with industry-leading compensation, which can be further enhanced if you are available for service calls. The company is known for its family-friendly, positive culture, emphasizing work/life balance, company functions, and opportunities for personal and professional growth. They offer comprehensive benefits, including medical, vision, and insurance coverage, PTO/holidays, paid time off during the holiday season (December 24-27), 401(k) with a 4% match, profit sharing, and support for training, study days, and certification testing. Responsibilities Conduct inspections of fire alarm and related systems in multifamily, commercial, assisted living, and high-rise structures. Mentor and guide an apprentice, ensuring the transfer of knowledge and skills. Manage multiple inspections daily for smaller accounts, or oversee large, multi-day inspections. Collaborate with other trades on projects involving related systems. Adhere to and enforce standard operating procedures (SOPs) to ensure thorough and accurate inspections. Maintain organization, punctuality, and professionalism on all job sites. Perform service calls as needed, with potential for additional compensation. Qualifications NICET II certification and O6 Electrical license required. Minimum of two years of experience in fire protection system inspections. Positive, family-friendly attitude with a strong fit for a collaborative and supportive culture. Ability to follow directions and accept feedback constructively. Highly organized, punctual, and able to lead by example. If you are a certified professional with a passion for fire protection systems and a desire to work in a supportive, family-oriented environment, we encourage you to apply. This role offers a unique opportunity to grow with a company that values expertise, teamwork, and a positive work/life balance.

Job Description Craft and Technical Solutions is an established Marine and Industrial Staffing Company with offices all over the country. We partner with businesses as well as jobseekers to place individuals into positions efficiently. We are currently in need of QA/QC Inspectors to join our team in Pascagoula, MS, Bremerton, WA and Chesapeake, VA. Pay Range: $24-36/hour Summary Knowledge of QA/QC functions Familiarity with inspection and test procedures Perform QA/QC functions to ensure compliance with industry standards and company requirements Conduct inspections and tests according to established procedures Produce/create electronic/handwritten Quality Assurance documentation as Objective Quality Evidence for work performed throughout the preservation process. Develop and Maintain Test and Inspection Plan (TIP) for all assigned jobs. Monitor and document all required readings with regard to, but not limited to, metal anchor tooth (profile), paint wet/dry film thickness (DFT), steel temperatures and all required environmental readings using appropriate equipment to include: micrometer, dry film thickness gauge, infrared thermometer, psychomotor. Ensure all assigned equipment is maintained in good working order with within all calibration certification intervals. All of the above requirements shall be completed in a safe and efficient manner so as not to cause injury to self or others. Requirements Minimum of 7 years of experience in manufacturing, shipyard, or quality (testing/inspecting) roles Proficiency in MS Office applications Ability to read and interpret codes, specifications, and advanced blueprints 3 years minimum NAVSEA support experience with submarine preservation NACE Inspector and/or SSPC NBPI required. Benefits CTS, LLC offers a comprehensive benefit package to eligible employees. Eligible employees may enroll in: Health Dental Vision Voluntary Life/Voluntary AD&D Short-Term Disability Long-Term Disability Hospital Indemnity Accident Critical Illness 401k Safety and responsible work practices are of paramount importance at CTS and are woven into the fabric of everything we do. We are committed to employee safety & development, the protection of the environment and the communities where we operate. We are ready to be a partner in your career success! Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform essential job functions. Craft and Technical Solutions, LLC has a consistent policy that requires an online application to be completed before we can further consider you as an applicant for this position. CTS is an EOE AA M/F/Vet/Disability

(2nd Shift / Mon - Fri, Weekends during Peak Season / 6:00PM - 2:30AM / Diff Pay) The Quality Control Technician is responsible for reviewing and verifying product labeling to ensure compliance with internal and regulatory specifications. The Quality Control Technician is also responsible for maintaining and promoting GMPs, SSOPs, Safety, and Food Safety described in Kettle Cuisine as the best practices. Key Responsibilities: Review and verify the content of labels including product name, lot#, Exp. Dates, regulatory and allergen information. Ensure labels meet regulatory requirements (e.g., FDA, USDA) Approve or reject labels depending on inspection criteria. Maintain accurate and traceable records of all label inspections and verifications. Participate in deviation, investigations of CAPAs regarding labeling errors. Performs verification of food safety and quality checks established in the KC-Everett Plant's HACCP/FSMA and Preventive Control Programs. Understand, Troubleshot and Escalate - Vision System if necessary. Assists QA management in the collection of data for the purpose of improving products and systems as necessary as it relates to food safety and quality (Statistical Process Controls). Work in a safe manner and follow all Kettle Cuisine standards, along with Federal, State, and Local regulations for occupational safety. Assist QA and site in accomplishing the KC-Everett Plant and QA departmental goals and objectives. Provide support to help with the investigation and troubleshooting of any food safety, quality, or process control related issues. Return labels and packaging supplies back to proper storage locations after usage. Maintain strong working relations with all the departments. Other duties as assigned. Qualifications and Experience Two years of related experience with respect to Quality Control. Good communication skills including computer, writing, and verbal. Ability to understand and verbally express ideas and instructions effectively. Ability to work effectively and efficiently with others. Ability to prioritize, follow instructions and follow-through to achieve results. Required Attributes Self-starter able to conceptualize and drive initiatives forward Positive attitude and motivated by contributing to the overall success of the team Able to develop strong relationships with internal and external stakeholders Creative problem-solving skills Obsessive attention to detail, well organized and able to juggle many projects at once Comfortable moving at a fast pace and in ambiguous environments Passionate about food Willing to address difficult situations head on with patience and respect Level Of Responsibility Works with little supervision, but work is reviewed. Exercises discretion within areas of responsibility. Recommends actions and alternatives to supervisor and others. Position has little to no contact with customers. Position makes an indirect contribution to efforts that generate moderate levels of revenue. Decisions or actions may have a moderate impact on other departments and/or the external relationships of the organization. Errors are usually detected after the fact and may result in moderate interruption and delays in work output. WORKING CONDITIONS AND PHYSICAL EFFORT The work environment characteristics described here are representative of those encountered while performing the essential functions of this job. Physical Demands/Efforts Work requires occasional physical exertion, including some lifting of objects weighing up to 25 pounds. Mental & Visual Demands Work performed by this position requires moderate concentration to effectively execute moderately complex tasks. Work occasionally requires some degree of visual effort for periods of time. Work Environment and Hazards Employee works in a manufacturing setting with some exposure to heat, cold, dust, or other factors of minor inconvenience. The position has some exposure to hazards that might cause minor injury. Must have availability and flexibility to work weekends or overtime as required.

BPI Medical is growing at a remarkable rate and offers a rewarding career for a proven leader interested in making a difference every day. We embrace our entrepreneurial culture and have created a workplace where collaboration is essential, courage is rewarded, speed is expected, and agility is the norm to meet our customer's needs. Our motto is "Its gotta be right. its gotta be fast. no exceptions." We live by our values of Integrity, Quality, On-time Delivery, Collaboration, Growth Mindset and Compassion. We have a relaxed work atmosphere with an exceptional staff. We understand that continuous improvement is more than a business philosophy. It's a personal contribution to making our customers, our business, and our team members better every day. This position will engage in quality control activities designed to inspect, measure, and verify the effectiveness, and adherence to medical industry quality standards. The position is expected to work independently with the ability to exercise sound judgment, following established processes and procedures that govern quality control inspection. Conducting inspections and tests on incoming raw materials, components, and finished products to ensure they meet established quality standards and specifications. Performing visual inspections, measurements, and functional tests on medical devices to verify their compliance with applicable regulations and standards, such as ISO 13485 and FDA guidelines. Documenting inspection results and maintaining accurate records of quality control activities in accordance with regulatory requirements. Proficient in the use of mechanical inspection equipment; including micrometers, calipers, fixed gauges, optical comparator, CMM and other inspection measuring tools. Identifying and reporting non-conformities or deviations to appropriate personnel for investigation and corrective action. Participating in investigations of quality issues and working with cross-functional teams to determine root cause and implement corrective and preventive actions. Ensuring that inspection equipment and tools are calibrated and maintained in accordance with regulatory requirements and company procedures. Developing and implementing quality control procedures and work instructions to ensure consistent product quality. Collaborating with production staff and other stakeholders to address quality issues and drive continuous improvement. Participating in internal and external quality audits to ensure compliance with applicable regulations and standards. Communicating effectively with customers, suppliers, and other stakeholders on quality-related matters, including product quality, regulatory compliance, and quality system requirements. We are proud to be an Equal Opportunity Employer. BPI Medical, also known as Ben's Precision Instruments, was founded by a machinist-craftsman from Holland. Ben Overmars Sr. is both an immigrant and a worker performing fully with a disability. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability. As a federal contractor, BPI Medical is required to participate in the federal government's E-Verify program. With E-Verify we are able to confirm the employment authorization of all newly hired employees and most existing employees through an electronic database maintained by the Social Security Administration and Department of Homeland Security.

Here's a quick overview of the role for your review: Job Title: Quality Calibration Technician Duration: 10+months(Possibilities for extension) Pay Range: $23.50/hr. On W2 Schedule: Mon to Fri 1st Shift 7: 00am to 3: 30pm Description: Job duties include but are not limited to: Monitors and maintains gage and process equipment calibration program. Calibrates M&TE to calibration standards. Manages gage R&R studies. Schedules outside calibration services, reviews and approves results to calibration standards. Works with Quality and Process Engineers to select appropriate measurement systems. Uses laser and touch probe CMMs along with standard measuring equipment to verify product as needed. Develop and improve calibration standards and procedures. Other task as needed and flexibility is key. Skills: Have a sincere desire to work and be able to work independently or with a team to complete tasks in a timely manner. Familiar with Windows OS. Able to read and interpret drawings including knowledge of GD&T. Experience using Catia, AutoCAD, IGES files in a measuring environment. Prior Metrology / Calibration experience under ISO17025 system. Prior inspection experience using portable CMMs and surface tools. Experience writing work instructions. 1-3 years of experience within an ISO9000 or equivalent quality / manufacturing environment. Education preferred: CCT, CQT, CQE or Six Sigma Black Belt.

Job DescriptionPetroleum Inspector Camin Cargo Control is a value-based organization that stands for more than just providing mission critical services. The Company's core principles of fairness, integrity and excellence have been the foundation upon which the organization was built. Fairness: Approach situations in an open, consistent, and ethical manner with fairness, sincerity, and honesty Integrity: Create an empowered, engaging, and accountable culture focused on client service Excellence: Always strive for excellence through continuous process improvement, best practices to achieve superior results and the creation of opportunities to benefit all stakeholders Position Summary Performs sampling, pipeline transfers, inventories and barge inspections including line condition surveys. Performs vessel inspections under the direct supervision of a Senior Inspector. Certifies that field assignments conform to company policies and procedures as well as job specific instructions supplied by the Operations Department. As company field representative, acts in a professional and dignified manner to maintain the company's respected and trusted reputation. Minimum Requirements Requires a High School Diploma (or equivalent) with good math skills and a minimum three months of inspection experience. Must complete Inspector level training and pass corresponding theoretical tests and field evaluations. Must have or obtain IFIA certification after gaining at least six months of industry experience. Must maintain a valid Transportation Worker's Identification Card (TWIC). Possess and maintain a vehicle in good working order, a valid driver's license, vehicle insurance and registration. Must be dependable, able to work independently and be able to effectively communicate and maintain professional relationships with numerous clients (i.e., terminal and vessel/barge personnel). Must pass company defined physical requirements. Must meet and maintain site-specific requirements mandated by customers and/or terminals to have access to all facilities. Responsibilities As instructed by the Operations Department and under the strict guidelines described in the Inspection and ASTM/API manuals: Acts as a Company representative in the field. Must be able to perform duties and responsibilities as per company policies and procedures. Maintains regular contact with Operations Department to receive work orders and schedules. Effectively communicates all aspects of assigned job duties. Maintains regular contact with Operations Department, terminals, and vessel to avoid delays or conflicts. Obtains, labels and transports samples to the laboratory in a timely manner as required by each specific job assignment. Maintains assigned inspection equipment in good working order and ensures equipment is properly calibrated and stored. Measures (gauge and temperature) products and performs all required field calculations per the API Standards, completes all required field documentation and submits reports to the Operations Department in a timely manner. Performs specialized inspection services such as loss control, wall washings or confined space entry upon receiving required training. Assists in the training of Probationary and Junior Inspectors. Fitness for Duty - Physical Demands Workday may consist of 8-12 hours; however, this can vary day to day or shift to shift. Much of the work is performed outdoors, wearing full Personal Protective Equipment (PPE) and could include possible exposure to high and low temperatures for prolonged duration of time. Work may be performed during day or nighttime hours and may involve working alone. All times listed below are approximate. • Maximum Lift-Floor to knee; Knuckle to waist; Waist to shoulder Weight Up to 45 lbs.- Duration/Day Up to 2 hours. • Walking- Weight Up to 45 lbs. -Duration/Day Up to 6 hours • Pushing-Pulling Weight Variable-Duration/Day Up to 2 hours • Carrying Weight Up to 45 lbs.- Duration/Day Up to 4 hours • Ascend/Descend Ladder/Stair Weight Up to 45 lbs.- Duration/Day Up to 2 hours • Extended Reach Weight Up to 45 lbs.- Duration/Day Up to 1 hour • Standing Weight Up to 45 lbs.- Duration/Day Up to 6 hours • Crouch/Squat/Knee Weight Up to 45 lbs.- Duration/Day Up to 1 hour • Tool use Weight 5-8 lbs. Duration/Day Up to 4 hours • Sitting Weight N/A-Duration/Day Up to 6 hours • Driving- Weight N/A- Duration/Day Up to 4 hours All are required to perform this position. This document contains Confidential and Proprietary information which is the property of Camin Cargo Control. None of the information contained herein may be disclosed, reproduced, distributed, or used without prior written consent from Camin. All rights reserved.

At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Commercial Airplanes is excited to offer opportunities for an Inspector Fabrication B to join our Quality team in Puget Sound, Washington. Join our dedicated team as an Inspector Fabrication, where your keen eye for detail will be essential in ensuring the integrity of our fabricated parts and assemblies. In this critical role, you will perform thorough inspections of materials and components. Collaborating closely with Engineering, Quality, and Manufacturing, you will play a key role in evaluating and improving build processes while investigating and resolving defect-related issues. Your expertise in using precision measuring instruments will enable you to assess dimensions and workmanship accurately, while your ability to document nonconforming items will help maintain high standards of production. With a focus on continuous improvement, you will conduct audits and in-process inspections, ensuring compliance with all specifications. If you are passionate about maintaining excellence in fabrication and thrive in a fast-paced environment, we invite you to contribute to our mission of delivering top-quality products. You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation. Position Responsibilities: Perform inspections of fabricated detail parts, materials, and assemblies for workmanship, alignment, fit, and conformance to blueprints and specifications. Inspect fabricated and machined parts, subassemblies, and tooling to ensure compliance with engineering specifications and quality standards. Collaborate with Engineering, Quality, and Manufacturing to evaluate and improve build processes and defect reduction methods. Investigate and resolve defect-related problems, initiating and implementing project plans for quality improvement. Document any nonconforming materials, hardware, tools, or assemblies according to established specifications and procedures. Conduct audits and surveillance of manufacturing and quality assurance processes to ensure compliance with specifications. Verify part numbers, serial numbers, and quantities against required paperwork upon receipt of parts and assemblies. Ensure all paperwork, including drawings and specifications, is complete, accurate, and up-to-date. Select and set up appropriate measuring instruments to check dimensions and workmanship of parts and assemblies. Inspect dimensions and workmanship, including visual weld inspections, according to drawings and specifications. Identify, document, and reject nonconforming parts/assemblies, noting discrepancies and required corrections. Perform re-inspections and initiate Re-inspection Requests (R/R) as needed, communicating with relevant inspection groups. Conduct in-process inspections, audits, and monitor heat treat processes, documenting required information. Verify certifications of tools, equipment, and personnel to ensure they are current and compliant. Handle and dispose of hazardous materials in accordance with safety regulations and contact supervisors for assistance when needed. Physical Demands and Potential Hazards: Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs. Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting. Work in environments that may involve contact with metals, solvents, and coolants. Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards. Adapt to varying noise levels and atmospheric conditions. Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties. This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered. Basic Qualifications: 3+ years of experience as a Quality Inspector. 3+ years of experience reading and understanding engineering drawings, blueprints, and specifications. 3+ years of Experience using software applications for internet navigation, email, Microsoft Suite and/or other specialized computer applications. 1+ years of experience in metal or composite fabrication in aerospace. Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel. Preferred Qualifications: Experience in Foreign Object Debris (FOD) risk 1+ years of experience inspecting aircraft/aerospace parts, components, and/or assemblies for conformance with applicable drawings, specifications, quality standards, and manufacturing plans. Typical Education & Experience: High school graduate or GED preferred. Relocation: Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement. Shift Work Statement: This position is for a variety of shifts Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay: $26.32/hour, with potential to earn up to $56.36/hour in accordance with the terms of the relevant collective bargaining agreement. Applications for this position will be accepted until Feb. 27, 2026 Language Requirements English Preferred Relocation Relocation assistance is not a negotiable benefit for this position. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

* Shift differentials for Swing Shift and Weekend Shift Dogwood Industries - Who We Are Build your future with Dogwood Industries! Dogwood Industries is at the forefront of designing and manufacturing Pre-engineered Panelized Relocatable Metal Buildings, delivering industry leading solutions for mission-critical projects across industrial and DoD markets. Through a precise blend of manufacturing and construction, we build high-performance, rapidly deployable structures that keep critical missions moving forward. Our team provides leadership in the design process that transforms the way our clients work by delivering buildings as equipment solutions in harsh environments around the world. If you are motivated by innovation, thrive in a fast-paced setting, and want to be part of a team that is rapidly growing and revolutionizing the building industry, we'd love to speak with you! General Job Description Dogwood Industries LLC is seeking an experienced Quality Control Inspector (QCI) to join our team in Sedro-Woolley, WA. A successful candidate will be experienced in inspection procedures in an industrial setting and will demonstrate an understanding of quality control procedures and key elements of the inspection process and documentation thereof. Duties & Responsibilities The core responsibility of the QCI is to inspect and report non-conformances in accordance with drawings, inspection checklists or other specifications identified in the quality assurance plan. Daily, the QCI may be engaged in these activities: * Identify defective or non-conforming work * Issue reports and document resolution of non-conforming conditions * Execute and document specific test plans * Maintain and distribute accurate drawings and red line corrections * Maintain quality control records, documents, and logs * Perform incoming material inspections and vendor inspections when required * Perform first article, visual and dimensional checks at all stages of production * Other duties as assigned Requirements Requirements * Familiarity with AWS D1.1/AWS D1.2 weld inspection * Strong organizational and communication skills * Ability to manage change along with competing priorities * Fluency in English with excellent written and oral skills * Proficiency in standard Office computer applications * CWI certification is a plus Qualifications * 1+ years' experience in quality control * Minimum high school diploma or vocational degree * Experience in steel fabrication or general construction * Ability to read and understand engineering drawings and shop drawings Physical Requirements/Work Environment This position requires moderate physical activity in a manufacturing environment. While performing the duties of this job, the employee is regularly required to have full range of mobility in upper and lower body, able to reach overhead, able to work in various positions, including, but not limited to, stooping, standing, bending over, sitting, kneeling, squatting; use hands to handle, or feel objects, tools or controls; reach with hands and arms; climb stairs; balance for extended periods of time. Be able to lift 50 pounds of weight when required. The employee will be exposed to shop elements such as noise, dust, fumes, and odors. Compensation $28.00 - $38.00 hourly, depending on experience and qualifications. Benefits * Health Benefits, including medical, dental and vision * Company paid and supplemental life insurance * Short-term disability * Long-term disability * Additional voluntary benefits * Paid vacation, paid sick leave and paid holidays * 401(k) retirement plan, with employer match * Employee Referral Bonus Program Applicant Notes * Applicants must provide complete work history with employer references for last three to five years * All employees are subject to a pre-employment background check and pre-employment and random drug testing. Due to working in / being exposed to a safety sensitive environment, THC testing will occur as part of all drug screens. Location This position is based out of the Dogwood Factory Office at 500 Metcalf st, Sedro-Woolley, WA 98284. There may be travel to the Dogwood Everett, WA Factory as needed. Application Assistance If you are an individual with a disability and need a reasonable accommodation in the application or hiring process, please contact Dogwood's HR department at ************** or ************************. Equal Employment Opportunity: All qualified applicants will receive consideration for employment without regard to race/ethnicity, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, age, or any other status protected by law. For more information about our commitment to equal employment opportunity, please see this government poster: Know Your Rights: Workplace Discrimination is Illegal. Disclaimer: Although the Company has attempted to accurately and thoroughly describe this position, the Company reserves the right to change the same, including to change, add to or subtract from the duties outlined, within the sole discretion of the Company, at any time, with or without advance notice. In order to meet company deadlines, work in excess of 40 hours per week may be required from time to time. PM22

Petroleum Inspector Camin Cargo Control is a value-based organization that stands for more than just providing mission critical services. The Company's core principles of fairness, integrity and excellence have been the foundation upon which the organization was built. Fairness: Approach situations in an open, consistent, and ethical manner with fairness, sincerity, and honesty Integrity: Create an empowered, engaging, and accountable culture focused on client service Excellence: Always strive for excellence through continuous process improvement, best practices to achieve superior results and the creation of opportunities to benefit all stakeholders Position Summary Performs sampling, pipeline transfers, inventories and barge inspections including line condition surveys. Performs vessel inspections under the direct supervision of a Senior Inspector. Certifies that field assignments conform to company policies and procedures as well as job specific instructions supplied by the Operations Department. As company field representative, acts in a professional and dignified manner to maintain the company's respected and trusted reputation. Minimum Requirements Requires a High School Diploma (or equivalent) with good math skills and a minimum three months of inspection experience. Must complete Inspector level training and pass corresponding theoretical tests and field evaluations. Must have or obtain IFIA certification after gaining at least six months of industry experience. Must maintain a valid Transportation Worker's Identification Card (TWIC). Possess and maintain a vehicle in good working order, a valid driver's license, vehicle insurance and registration. Must be dependable, able to work independently and be able to effectively communicate and maintain professional relationships with numerous clients (i.e., terminal and vessel/barge personnel). Must pass company defined physical requirements. Must meet and maintain site-specific requirements mandated by customers and/or terminals to have access to all facilities. Responsibilities As instructed by the Operations Department and under the strict guidelines described in the Inspection and ASTM/API manuals: Acts as a Company representative in the field. Must be able to perform duties and responsibilities as per company policies and procedures. Maintains regular contact with Operations Department to receive work orders and schedules. Effectively communicates all aspects of assigned job duties. Maintains regular contact with Operations Department, terminals, and vessel to avoid delays or conflicts. Obtains, labels and transports samples to the laboratory in a timely manner as required by each specific job assignment. Maintains assigned inspection equipment in good working order and ensures equipment is properly calibrated and stored. Measures (gauge and temperature) products and performs all required field calculations per the API Standards, completes all required field documentation and submits reports to the Operations Department in a timely manner. Performs specialized inspection services such as loss control, wall washings or confined space entry upon receiving required training. Assists in the training of Probationary and Junior Inspectors. Fitness for Duty - Physical Demands Workday may consist of 8-12 hours; however, this can vary day to day or shift to shift. Much of the work is performed outdoors, wearing full Personal Protective Equipment (PPE) and could include possible exposure to high and low temperatures for prolonged duration of time. Work may be performed during day or nighttime hours and may involve working alone. All times listed below are approximate. • Maximum Lift-Floor to knee; Knuckle to waist; Waist to shoulder Weight Up to 45 lbs.- Duration/Day Up to 2 hours. • Walking- Weight Up to 45 lbs. -Duration/Day Up to 6 hours • Pushing-Pulling Weight Variable-Duration/Day Up to 2 hours • Carrying Weight Up to 45 lbs.- Duration/Day Up to 4 hours • Ascend/Descend Ladder/Stair Weight Up to 45 lbs.- Duration/Day Up to 2 hours • Extended Reach Weight Up to 45 lbs.- Duration/Day Up to 1 hour • Standing Weight Up to 45 lbs.- Duration/Day Up to 6 hours • Crouch/Squat/Knee Weight Up to 45 lbs.- Duration/Day Up to 1 hour • Tool use Weight 5-8 lbs. Duration/Day Up to 4 hours • Sitting Weight N/A-Duration/Day Up to 6 hours • Driving- Weight N/A- Duration/Day Up to 4 hours All are required to perform this position. This document contains Confidential and Proprietary information which is the property of Camin Cargo Control. None of the information contained herein may be disclosed, reproduced, distributed, or used without prior written consent from Camin. All rights reserved.