Refining engineer full time jobs - 14 jobs

Seeking a Staff Engineer to perform landfill construction quality assurance (CQA) and construction technician. This position may require travel and overnight stays including some weekends, depending on job site location. Most work is in Ohio. The Staff Engineer will start in the field, responsible for traveling to various solid waste facilities to perform on-site documentation/recording of daily activities, verifying the work contractors are doing is accurate, as well as soil testing to ensure it meets project specifications. This role can be trained and does not require prior experience. Must be comfortable living out of hotels for extended periods of time (not frequent, but occasionally expected). Will eventually move into more of an office-based role once the field work is mastered. Responsibilities: -Construction monitoring and documentation of construction activities at solid waste landfill facilities including field inspection and testing of soils and geosynthetic liners. On-site job training will be provided as necessary. -Responsible for assuring overall compliance with all applicable project specifications and construction drawings. -Supervise and complete construction quality assurance and construction quality control activities in several states, including the construction of landfill components and other environmental control systems. -Perform field and/or laboratory testing, observation, and inspection of construction materials (e.g., soils, aggregates, concrete, asphalt, and steel). -Communicate with project managers, engineering technicians, client representatives, and contractor representatives regarding the construction site, project requirements, and testing, observation, and inspection results. -Transport material samples with associated identifying documentation to the laboratory for further testing and analysis. -Tabulate, prepare, and submit data and observations in written and digital reports for daily transmittal to the Weaver Project Manager. -Maintain and clean equipment, vehicles, and work areas. -Adhere to strict safety standards. -Under close supervision of higher-level technicians or staff professionals, assist on tasks and perform basic testing and observation duties. -Provide clear documentation of findings and results. -Communicate information to the Project Manager and discuss the accuracy of data in preparation for submittal. -Submit documentation and communicate results as directed by the Project Manager. -Progressively assume increased roles of training and responsibility in work assignments. -Follow safety rules, practices, and other safety requirements for all projects. -Perform pre-task planning prior to executing work. -Report any safety issues or concerns to management. -Maintain quality standards on all projects. Skills civil engineering, blueprint, construction drawings, Engineering, materials testing, soil testing, Construction inspection, nuclear density gauge, landfill design, quality assurance inspection Top Skills Details civil engineering,blueprint,construction drawings Additional Skills & Qualifications -Civil Engineering degree is strongly preferred; will consider environmental engineering or construction related degrees -No working experience required; will provide on-the-job training in the field -Ability to read and interpret construction drawings -Ability/ willingness to travel full time and stay in hotels as required -Ability/ willingness to work outdoors in various weather conditions -On-site construction experience preferred -Soil sampling/ testing experience a plus -Ability to travel across Ohio and surrounding states Experience Level Entry Level Job Type & Location This is a Contract to Hire position based out of Dublin, OH. Pay and Benefits The pay range for this position is $25.00 - $30.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Dublin,OH. Application Deadline This position is anticipated to close on Feb 2, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com (%20actalentaccommodation@actalentservices.com) for other accommodation options.

Core Molding Technologies is seeking a Senior Materials Engineer to lead material and process development efforts from concept to commercialization. This role will serve as a subject matter expert in composite materials, driving innovation, improving process scalability, and supporting cross-functional engineering, quality, and customer initiatives. Ideal candidates will have a strong technical background in materials science, hands-on lab and testing experience, and a passion for mentoring others while delivering practical solutions. Key Responsibilities * Design, select, and optimize materials to meet performance, cost, and sustainability targets * Develop and refine manufacturing processes for efficiency, quality, and scalability * Lead cross-functional development projects from concept through launch * Serve as subject matter expert on materials science and composites * Conduct material testing, characterization, and performance validation * Partner with suppliers, internal teams, and external labs for sourcing, testing, and troubleshooting * Identify opportunities for cost savings and process improvement through materials innovation * Oversee lab instrumentation, cleanliness, calibrations, and chemical inventories * Interpret and guide chromatographic, FTIR, spectrophotometric, and other analytical testing * Assist with root cause analysis and guide corrective actions using tools such as FMEA and 5 Whys * Maintain accurate documentation of test results, process data, and materials specifications * Improve and maintain materials database for internal use * Provide training and mentorship to junior engineers and technicians * Ensure compliance with ISO 9001, ISO 14001, and applicable environmental regulations Required Qualifications * Bachelor's degree in Materials Science, Chemical Engineering, Chemistry, or related field * Minimum 6 years of experience in material development, processing, or lab-based engineering roles * Strong background in materials testing, lab procedures, and documentation * Professional communication skills with ability to collaborate cross-functionally and externally * Strong problem-solving, time management, and organizational skills * Proficiency in Microsoft Office and familiarity with database management * Working knowledge of composites and manufacturing environments Preferred Qualifications * Master's degree in engineering or chemistry-related discipline * 5+ years of experience in the molding, automotive, or manufacturing industries * Experience with materials synthesis, advanced analytical chemistry, and/or sustainability initiatives * Hands-on experience with lab equipment calibration, quality control, and material safety compliance Work Environment This position requires frequent work in both laboratory and manufacturing environments, including interaction with plant floor operations. Standard office equipment and lab instrumentation will be used regularly. Physical Demands The role may involve standing, walking, sitting, climbing stairs, or lifting materials and equipment up to 40 lbs as needed. Schedule Full-time, Monday through Friday. Some extended hours or weekend support may be required depending on customer timelines or testing schedules. Why Join Us At Core Molding Technologies, you'll be part of a team driving real innovation in advanced materials and manufacturing. We offer: * Challenging, high-impact engineering projects * Exposure to cutting-edge composite technologies * A collaborative, supportive team culture * Competitive compensation and comprehensive benefits * Opportunities to mentor, grow, and influence product development at scale Recruiters We do not accept unsolicited resumes from third-party agencies.

Full-time Description Come Join the Toledo Tool & Die Team! Located close to the Michigan/Ohio border, Toledo Tool and Die has diligently served the people of both of those great states since 1940. It was a company founded on one simple principle: to do the finest work possible for our clients and to deliver on every promise we make. Today Toledo Tool & Die has three facilities in the Toledo area and one in Pioneer, Ohio. Toledo Tool & Die is adding a Weld Engineer to our team to support our continued growth. This is a full-time position based in Toledo, Ohio. We offer competitive wages, growth opportunities, and a clean, safe work environment. WHAT TOLEDO TOOL & DIE CAN OFFER YOU: Weekly pay 10 paid holidays Paid Time Off 401k Full benefits (medical, dental, vision) WHAT MAKES YOU A GREAT FIT FOR THIS POSITION: Previous experience as a weld engineer Strong work ethic Positive attitude Consistent attendance Willingness to learn Safety minded KEY RESPONSIBILITIES: Develop and maintain familiarity with current and future products and processes; investigate and maintain expertise with welding technologies and developments; utilize this knowledge to evaluate, improve, recommend, and implement welding processes for the purpose of reducing costs and improving product and process quality and reliability. Provides assistance to less experienced personnel. SUMMARY OF ESSENTIAL JOB FUNCTIONS: Develop welder requirements and designs as required for quoting new business. Specify, source, and implement welding process equipment, development of preventative maintenance programs for plant welding equipment; establish data for proper process parameters; adjustment and spare parts requirements for welding equipment. Develop and maintain a Plant Welding Standards Manual for the purpose of providing operational guidelines, directing, and coordinating improvements for products and process design. Manual to include operational guidelines, process parameters, process theory, PM, quality control, troubleshooting, material and product limitations, etc. Remain current with new technologies for the purpose of incorporating improvements in welding process. Develop and maintain inventories of plant welding equipment. Direct areas for improvements and process development. Work with product design personnel to assure manufacturability of designs. Develop justification for the purchase of new production equipment that will meet budgetary requirements and maintain a competitive position. Apply technical knowledge to recommend processes and equipment applicable to the metal manufacturing requirements. Utilize cut and etch equipment to optimize welding process parameters. Update welding equipment specifications. Develop and conduct in house welding training program for the purpose of insuring proper welding techniques are utilized throughout plant operations. Utilize methods of continuous improvement. Stop production if defective or unsafe parts or conditions appear. Other duties assigned by immediate supervisor. Leads root cause analysis in the resolution of any test failures. Reviews and approves the analysis with the appropriate engineering management resources to resolve and particularly difficult problems. Ensure the appropriate management teams are brought in for any potential safety concern. Assist in evaluation of reports, decisions, and results of department in relation to established goals. Recommends new approaches, policies, and procedures to affect continual improvement in efficiency of department and services performed. Prepare cost estimates. Plan and execute engineering changes. Prioritize and complete multiple tasks as scheduled with minimal supervision and work overtime as needed (daily, weekends, shutdown, etc…) Identify and record any problems relating to product, process and quality systems. Initiate, recommend, and provide solutions through designated channels and then verify implementation of solutions to problems. Responsible to process and document problem solving methodologies, such as 8D, 5Y and Fishbone Diagrams. Requirements A Bachelor degree in Weld Engineering, a similar technical discipline or equivalent experience. At least three (3) years in the weld engineering function that displays progressive work-related skill, knowledge, or experience in a fast-paced, high volume manufacturing environment is required. Preferably with an OEM or Tier I/II supplier in the automotive environment. Strong computer skills, including but not limited to, Microsoft Software (Word, Excel, Powerpoint) Knowledge of Welding processes and procedure Experience with weld tool design and equipment buy-off/commissioning process Ability to travel to our plant locations for support as well as vendor locations within the US

We're building a world of health around every individual - shaping a more connected, convenient and compassionate health experience. At CVS Health , you'll be surrounded by passionate colleagues who care deeply, innovate with purpose, hold ourselves accountable and prioritize safety and quality in everything we do. Join us and be part of something bigger - helping to simplify health care one person, one family and one community at a time. **Position Summary** Serves as a senior operational leader responsible for driving excellence in security and engineering operations across the enterprise. This role leads workforce management, productivity, process optimization, and analytics-driven business insights, ensuring secure development practices and business objectives are achieved. The position also applies deep technical expertise in support of operational goals, enabling effective security tooling and technical problem-solving as needed. **Key Responsibilities** + Enterprise Operational Leadership + Lead security and engineering operations across the organization, aligning teams and processes with business and security objectives. + Oversee workforce management-including contingent labor, headcount tracking, and capacity planning-to meet operational goals. + Optimize productivity, streamline workflows, pivot operational strategies as needed, and drive continuous improvement through data-driven decision-making. + Financial, Planning, and Analytical Support + Provide analytical insights into tool adoption, remediation velocity, developer experience friction points, and resourcing needs. + Support long-range planning by identifying engineering investments required to improve security posture and operational capability. + Business Insights Through Data and Analytics + Translate complex datasets into meaningful insights that support proactive, evidence-based decision-making. + Enable leadership visibility into risk posture and program effectiveness through strong analytical storytelling. + Strategy & Communications Management + Serve as a senior communicator who can simplify complex technical concepts for leadership and engineering stakeholders. + Develop clear, concise narrative materials and presentations to support strategic alignment, executive reporting, and program acceleration. + Metrics, Reporting, and Executive Communication + Develop and track KPIs, operational metrics, and headcount to inform strategic decisions and support business cases. + Deliver executive-ready presentations, dashboards, and reports on operational performance, security posture, and workforce status. + People and Relationship Management + Manage, mentor, and develop both permanent and contingent staff, fostering a collaborative and high-performing environment. + Build strong partnerships with engineering, platform, and business stakeholders to drive program adoption and operational alignment. + Technical Support for Operations + Apply technical expertise to support secure development practices, resolve complex engineering challenges, and enable adoption of security tooling. + Lead or advise on the implementation of automation, process improvements, and quality standards for secure development. + Risk Management and Governance + Identify and address operational, technical, and workforce risks in a timely manner. + Ensure governance and compliance standards are met for secure development operations. **Required Qualifications** + 7+ years of experience in technology operations, strategy, and/or engineering within a Product, Cybersecurity, or Development context + 3+ years of direct experience with the SDLC including but not limited to SAST, DAST, MAST, Scanning, Automation, Containers, etc. + 3+ years of experience with data-driven, analytical, and communication skills, including executive reporting and strategic storytelling. + 2+ years of experience with people management, contingent workforce oversight, and headcount tracking. **Preferred Qualifications** + Proven experience with improving the Developer Experience including tooling implementation, automation, data and reporting, etc. + Proven ability to lead enterprise-scale operational initiatives and deliver measurable improvements. + High level executive presentation and stakeholder management. **Education** + Bachelor's degree or equivalent experience (High School Diploma and 4 years relevant experience) **Pay Range** The typical pay range for this role is: $106,605.00 - $284,280.00 This pay range represents the base hourly rate or base annual full-time salary for all positions in the job grade within which this position falls. The actual base salary offer will depend on a variety of factors including experience, education, geography and other relevant factors. This position is eligible for a CVS Health bonus, commission or short-term incentive program in addition to the base pay range listed above. This position also includes an award target in the company's equity award program. Our people fuel our future. Our teams reflect the customers, patients, members and communities we serve and we are committed to fostering a workplace where every colleague feels valued and that they belong. **Great benefits for great people** We take pride in our comprehensive and competitive mix of pay and benefits - investing in the physical, emotional and financial wellness of our colleagues and their families to help them be the healthiest they can be. In addition to our competitive wages, our great benefits include: + **Affordable medical plan options,** a **401(k) plan** (including matching company contributions), and an **employee stock purchase plan** . + **No-cost programs for all colleagues** including wellness screenings, tobacco cessation and weight management programs, confidential counseling and financial coaching. + **Benefit solutions that address the different needs and preferences of our colleagues** including paid time off, flexible work schedules, family leave, dependent care resources, colleague assistance programs, tuition assistance, retiree medical access and many other benefits depending on eligibility. For more information, visit ***************************************** We anticipate the application window for this opening will close on: 02/04/2026 Qualified applicants with arrest or conviction records will be considered for employment in accordance with all federal, state and local laws. CVS Health is an equal opportunity/affirmative action employer, including Disability/Protected Veteran - committed to diversity in the workplace.

Robotic Welding Engineer Department: Engineering Last Revised: 1/2026 Reports To: Engineering Manager The Robotic Welding Engineer will provide application and engineering support on robot welding projects and welding fixture design. This person will be the lead programmer on turn-key robotic welding solutions, as well as supporting other standardized welding products. They will be involved in writing robotic welding standards and working within our current engineering standards network to further develop and prove welding standards. They should have significant experience programming robotic welding applications (FANUC robots preferred) and be comfortable across a variety of welding applications and using a variety of welding power sources. Job Functions and Responsibilities Welding Engineer * Program and optimize robotic welding paths (spot, MIG, TIG, laser, etc.) * Select welding processes, wire, gas, and parameters * Develop weld schedules and parameter libraries * Perform weld trials and DOE studies * Establish standard weld procedures (WPS) * Troubleshoot weld defects (porosity, spatter, burn-through, lack of fusion) * Integrate power sources, wire feeders, seam trackers, vision systems * Collaborate on weld fixture designs, ensure proper part location and clamping Project Management * Owns project schedule, budget, and planned commitments. Works with other groups within the organization to ensure deadlines are met. * Can clearly write system documentation with the end user in mind: installation and setup; operations manual, program commenting, etc. * Conduct all work in a detail-oriented way, especially in writing code to make it easy to troubleshoot and repair. * Estimate labor, material, or construction costs for budget preparation purposes. * Prepare specifications for purchases of materials or equipment. * Inspect completed installations and observe operations to ensure conformance to design and equipment specifications and compliance with operational, safety, or environmental standards. * Travel to commission and service equipment as needed. * Can successfully work on multiple projects simultaneously. As a part of our engineering team, this position will interact with controls engineers during the design and project implementation phases. The following job functions are not required from this position, but candidates that have experience in these areas will be favorably considered. APT is committed to further training in these areas as required. Electrical System Design * Possess controls hardware knowledge including but not limited to power distribution systems; circuit protection; power supplies; PLC/HMI's; safety systems; robots; drives; servos; networks; vision systems; code reading and parts tracking. * Can properly read and interpret mechanical drawings and print packages. * Can accurately prepare electrical schematics, part lists and electrical system specifications. * Ensures that designs, installations, and operations conform to industry, internal and customer standards. * Is familiar with industry standards such as (NFPA79/EN60204) * Can successfully apply principles of electrical theory across various projects. * Operate computer-assisted design software (AutoCAD Electrical). Control System Design and Programming * Ability to program automation system control logic/HMI from scratch; ability to debug automation system logic/HMI/integration and communication issues; design logic and controls to engineering and customer specifications. * Safety system programming and validation. Assists in design to ensure appropriate levels are met based on risk analysis. Validate hardware design and programming post build ensuring appropriate safety functions and performance level is achieved. * Plant Integration: Work with customers to integrate end-user plant systems into machine and system logic. * Configure and troubleshoot machine setup: hardware configuration; sensor setup; ability to debug and troubleshoot basic machine functions; induce and test faults in logic and safety systems. * Provides both formal and informal training to peers and groups within the organization as well as customers and end users. * Innovates system integration logic and technology to advance APT's position in the Automation Industry. Education and Experience * Engineering degree (preferably 4-year degree in welding engineering, robot engineering, or equivalent). Experience equivalent will be considered. * Demonstration of prior history and understanding of welding engineering and programming for robotic welding applications. * Experience working with FANUC robots preferred. Classification * Full time, Exempt Supervisory Responsibilities * There are no supervisory responsibilities with this position. Physical Requirements * Able to accurately see fine details in prints, on computer, or in machines (unaided or with glasses, magnifying tools, etc.) * Must be able to stand or sit for extended periods of time. The duties of this job could range from being on a shop floor to sitting at a desk for 8-10hrs. * Able to manually operate small hand tools and larger power tools. * Is a team-oriented player. Tools and Technology * Proficient working knowledge of laptop computers and office computing applications; ability to connect and configure multiple networks and understand basic routing and connections to networks. * Basic hand and power tools for electrical wiring and controls components setup. * AutoCAD Electrical * Rockwell Studio 5000 * FANUC Roboguide * Various other device integrations as needed. * Familiarity with ERP software and bill of material / material release process * FANUC robots

Seeking a Staff Engineer to perform landfill construction quality assurance (CQA) and construction technician. This position may require travel and overnight stays including some weekends, depending on job site location. Most work is in Ohio. The Staff Engineer will start in the field, responsible for traveling to various solid waste facilities to perform on-site documentation/recording of daily activities, verifying the work contractors are doing is accurate, as well as soil testing to ensure it meets project specifications. This role can be trained and does not require prior experience. Must be comfortable living out of hotels for extended periods of time (not frequent, but occasionally expected). Will eventually move into more of an office-based role once the field work is mastered. Responsibilities: * Construction monitoring and documentation of construction activities at solid waste landfill facilities including field inspection and testing of soils and geosynthetic liners. On-site job training will be provided as necessary. * Responsible for assuring overall compliance with all applicable project specifications and construction drawings. * Supervise and complete construction quality assurance and construction quality control activities in several states, including the construction of landfill components and other environmental control systems. * Perform field and/or laboratory testing, observation, and inspection of construction materials (e.g., soils, aggregates, concrete, asphalt, and steel). * Communicate with project managers, engineering technicians, client representatives, and contractor representatives regarding the construction site, project requirements, and testing, observation, and inspection results. * Transport material samples with associated identifying documentation to the laboratory for further testing and analysis. * Tabulate, prepare, and submit data and observations in written and digital reports for daily transmittal to the Weaver Project Manager. * Maintain and clean equipment, vehicles, and work areas. * Adhere to strict safety standards. * Under close supervision of higher-level technicians or staff professionals, assist on tasks and perform basic testing and observation duties. * Provide clear documentation of findings and results. * Communicate information to the Project Manager and discuss the accuracy of data in preparation for submittal. * Submit documentation and communicate results as directed by the Project Manager. * Progressively assume increased roles of training and responsibility in work assignments. * Follow safety rules, practices, and other safety requirements for all projects. * Perform pre-task planning prior to executing work. * Report any safety issues or concerns to management. * Maintain quality standards on all projects. Skills civil engineering, blueprint, construction drawings, Engineering, materials testing, soil testing, Construction inspection, nuclear density gauge, landfill design, quality assurance inspection Top Skills Details civil engineering,blueprint,construction drawings Additional Skills & Qualifications * Civil Engineering degree is strongly preferred; will consider environmental engineering or construction related degrees * No working experience required; will provide on-the-job training in the field * Ability to read and interpret construction drawings * Ability/ willingness to travel full time and stay in hotels as required * Ability/ willingness to work outdoors in various weather conditions * On-site construction experience preferred * Soil sampling/ testing experience a plus * Ability to travel across Ohio and surrounding states Experience Level Entry Level Job Type & Location This is a Contract to Hire position based out of Dublin, OH. Pay and Benefits The pay range for this position is $25.00 - $30.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Dublin,OH. Application Deadline This position is anticipated to close on Feb 2, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

. Are you a Construction Materials Engineer seeking a challenging opportunity to grow your career with a firm committed to our employees and providing high-quality service to our clients? S&ME is looking for an eager and dedicated full-time Construction Materials Engineer to join our Construction Services team in Columbus, Ohio. At S&ME, we have a history of delivering innovative geotechnical, civil, environmental, and construction material testing for over 50 years. Over the decades, we have grown into a trusted partner for clients across various industries, including transportation, energy, water, waste management, education, government, commercial, industrial, and more. Our commitment to technical excellence and integrity has established us as a leader in our field. . Why Work at S&ME? * Professional Growth: We believe in providing continuous learning opportunities, mentorship programs, and a supportive work environment. Let us tell you more about that! * Innovative Projects: Join a team that works on diverse and challenging projects of all sizes and complexities, including but not limited to airports, solar farms, power plants, schools, trails, mixed-use, sports stadiums, dams, museums, and more. * Inclusive Culture: Our culture is built on collaboration and mutual respect. We want you to want to come into the office to build relationships, laugh together, learn from each other, and enjoy the time with your teammates and colleagues. * Work-Life Balance: We believe in a flexible working environment, allowing you and your manager to determine how you can work most effectively and collaboratively to meet your client, team, and personal commitments. * Community Impact: Our work creates lasting, positive impacts on the communities we serve. We pride ourselves on our technical excellence, quality work and client satisfaction to continue making a difference. . About The Role: The Construction Materials Engineer role involves leading field inspection and laboratory testing operations on geotechnical and construction projects. You'll ensure regulatory compliance and quality standards while providing mentorship to field staff and strengthening client relationships. * Project Oversight: Supervise geotechnical and materials testing projects from planning through final reporting. * Client Collaboration: Engage with clients to understand project goals and provide tailored solutions. * Team Leadership: Mentor and lead field staff while promoting a strong safety culture. * Coordination: Work closely with lab and field teams to ensure timely and high-quality project execution. * Business Development: Contribute to market growth through client relationships and technical excellence. . About You: * You have a Bachelor's degree in Civil, Geotechnical Engineering, or a closely related field. * You have a minimum of 5 years of experience in construction inspections, geotechnical services, or special inspections. * You have or can obtain a Professional Engineer (PE) license within six months of hire. * You have a solid understanding of ASTM, AASHTO, DOT standards, and IBC Special Inspections. * You are willing to work in field conditions and can safely handle equipment and lift up to 50 lbs. . Grow With Us: At S&ME, your career growth matters. You'll receive professional training, work on exciting projects, and be part of a company that truly invests in its people. This is more than a job; it's a chance to build a long-term career in the engineering and construction industry. S&ME provides a comprehensive benefits package to support you and your family, as well as career development resources. Come grow and thrive with us at S&ME! * Medical, Dental & Vision Plans with HSA and FSA options * 100% Employee Stock Ownership Plan (ESOP) * 401K with Company Matching * PTO with Rollover * Maternity/Paternity Leave * Employee Recognition Program * Credential Incentive Program * Tuition Reimbursement * Company Vehicle with Fuel Card for Project-Based Work * $2,000 Referral Bonuses & More! . Join us at S&ME! This full-time role offers competitive pay based on experience. Candidates must comply with our Fleet Management, Substance Policy, and Reference Check requirements. Only candidates with valid employment eligibility (I-9) will be considered. Visa assistance is not available. S&ME reserves the right to hire internally or externally at any time. No candidate/recruiter calls, personal calls, or walk-ins are accepted.

• Experience: o 7 to10 years experience in materials engineering in a manufacturing environment for products made of plastic, paper, or related materials o Hands-on floor-level leadership experience in a light manufacturing environment with high volume component products o Experience with manufactured products made from materials with extruded plastic, laminated materials, or other sophisticated raw materials of paper or plastic desired o Process experience in extrusion or laminating of materials, injection molding, or other similar continuous manufacturing process operations ideal o Materials experience in plastics, polyester, polyimide, polyethylene, styrene, Nomex, Mylar, etc. o Experience with adhesives, solvents, etc. o Knowledge of manufacturing systems with mechanical, electrical, or pneumatic processes o Experience in lab or testing facilities leading to manufacturing a product • Communications: o Excellent verbal and written communication skills in a union and non-union production facility o Decisive and can make decisions on-the-go with limited data o Open-minded, educator/mentor, problem solver, people person, dedicated o Bias for action and attention to detail • Computer expertise: o Microsoft Office o ERP skills and experience Qualifications • Education: o Bachelor's degree in Chemistry, Engineering, or Material Science or related. o Understands Theory, but has hands-on experience of materials, manufacturing technique, etc. Additional Information Job Status: Full time Eligiblity: EAD GC or GC or US Citizens Share the Profiles to ************************** Contact: ************ Keep the subject line with Job Title and Location

Charter Manufacturing is a fourth-generation family-owned business where our will to grow drives us to do it better. Join the team and become part of our family! Ready to shape the future of Steel? Charter Steel is hiring a May 2026 graduate for our Materials Rotational Engineer Program! The Materials Engineering Rotational program provides the opportunity for a recent Materials Engineering/Metallurgical Engineering graduate to join Charter Steel on a full-time basis and rotate between different departments, accelerating their professional growth and development! Program Structure: Rotations in Cleveland, OH and Fostoria, OH Start Date: June 2026 Relocation support What you'll bring: Bachelor's Degree in Materials Engineering. Related internship or work experience. High level of initiative for excellence, results, and process improvement. Excellent verbal and written communication skills. Demonstrated abilities in planning and communication of ideas and concepts. Strong interpersonal skills to work with individuals at all levels of the business. Excellent analytical, critical thinking and problem solving skills. Demonstrated passion and intellectual curiosity within the steel industry and Materials field of study. Willingness to travel as needed. What you'll focus on: Learn the operations of the plant and how metallurgical theories and practices are incorporated into those operations to improve the process. Understand the effect of process changes on product performance. Collect and communicate product quality data. Perform Root Cause Analysis of process-related defects and effects on final products. Assist in trouble-shooting and resolving customer complaints with failure analysis and metallographic interpretations. Contribute to process improvements based on detailed analysis of quality parameters data and collaboration with outside technical resources and organizations. Participate in Six Sigma, Orange Belt, and problem solving teams. Answer inquiries from other departments and monitor production for problems or issues. Conduct customer and internal tours based on product and process needs. #LI-Onsite #LI-AF1 We offer comprehensive health, dental, and vision benefits, along with a 401(k) plan that includes employer matching and profit sharing. Additionally, we offer company-paid life insurance, disability coverage, and paid time off (PTO).

Job Description Construction Materials Engineer . Are you a Construction Materials Engineer seeking a challenging opportunity to grow your career with a firm committed to our employees and providing high-quality service to our clients? S&ME is looking for an eager and dedicated full-time Construction Materials Engineer to join our Construction Services team in Columbus, Ohio. At S&ME, we have a history of delivering innovative geotechnical, civil, environmental, and construction material testing for over 50 years. Over the decades, we have grown into a trusted partner for clients across various industries, including transportation, energy, water, waste management, education, government, commercial, industrial, and more. Our commitment to technical excellence and integrity has established us as a leader in our field. .Why Work at S&ME? Professional Growth: We believe in providing continuous learning opportunities, mentorship programs, and a supportive work environment. Let us tell you more about that! Innovative Projects: Join a team that works on diverse and challenging projects of all sizes and complexities, including but not limited to airports, solar farms, power plants, schools, trails, mixed-use, sports stadiums, dams, museums, and more. Inclusive Culture: Our culture is built on collaboration and mutual respect. We want you to want to come into the office to build relationships, laugh together, learn from each other, and enjoy the time with your teammates and colleagues. Work-Life Balance: We believe in a flexible working environment, allowing you and your manager to determine how you can work most effectively and collaboratively to meet your client, team, and personal commitments. Community Impact: Our work creates lasting, positive impacts on the communities we serve. We pride ourselves on our technical excellence, quality work and client satisfaction to continue making a difference. .About The Role: The Construction Materials Engineer role involves leading field inspection and laboratory testing operations on geotechnical and construction projects. You'll ensure regulatory compliance and quality standards while providing mentorship to field staff and strengthening client relationships. Project Oversight: Supervise geotechnical and materials testing projects from planning through final reporting. Client Collaboration: Engage with clients to understand project goals and provide tailored solutions. Team Leadership: Mentor and lead field staff while promoting a strong safety culture. Coordination: Work closely with lab and field teams to ensure timely and high-quality project execution. Business Development: Contribute to market growth through client relationships and technical excellence. .About You: You have a Bachelor's degree in Civil, Geotechnical Engineering, or a closely related field. You have a minimum of 5 years of experience in construction inspections, geotechnical services, or special inspections. You have or can obtain a Professional Engineer (PE) license within six months of hire. You have a solid understanding of ASTM, AASHTO, DOT standards, and IBC Special Inspections. You are willing to work in field conditions and can safely handle equipment and lift up to 50 lbs. .Grow With Us: At S&ME, your career growth matters. You'll receive professional training, work on exciting projects, and be part of a company that truly invests in its people. This is more than a job; it's a chance to build a long-term career in the engineering and construction industry. S&ME provides a comprehensive benefits package to support you and your family, as well as career development resources. Come grow and thrive with us at S&ME! Medical, Dental & Vision Plans with HSA and FSA options 100% Employee Stock Ownership Plan (ESOP) 401K with Company Matching PTO with Rollover Maternity/Paternity Leave Employee Recognition Program Credential Incentive Program Tuition Reimbursement Company Vehicle with Fuel Card for Project-Based Work $2,000 Referral Bonuses & More! .Join us at S&ME! This full-time role offers competitive pay based on experience. Candidates must comply with our Fleet Management, Substance Policy, and Reference Check requirements. Only candidates with valid employment eligibility (I-9) will be considered. Visa assistance is not available. S&ME reserves the right to hire internally or externally at any time. No candidate/recruiter calls, personal calls, or walk-ins are accepted. Job Posted by ApplicantPro

• Experience: o 7 to10 years experience in materials engineering in a manufacturing environment for products made of plastic, paper, or related materials o Hands-on floor-level leadership experience in a light manufacturing environment with high volume component products o Experience with manufactured products made from materials with extruded plastic, laminated materials, or other sophisticated raw materials of paper or plastic desired o Process experience in extrusion or laminating of materials, injection molding, or other similar continuous manufacturing process operations ideal o Materials experience in plastics, polyester, polyimide, polyethylene, styrene, Nomex, Mylar, etc. o Experience with adhesives, solvents, etc. o Knowledge of manufacturing systems with mechanical, electrical, or pneumatic processes o Experience in lab or testing facilities leading to manufacturing a product • Communications: o Excellent verbal and written communication skills in a union and non-union production facility o Decisive and can make decisions on-the-go with limited data o Open-minded, educator/mentor, problem solver, people person, dedicated o Bias for action and attention to detail • Computer expertise: o Microsoft Office o ERP skills and experience Qualifications • Education: o Bachelor's degree in Chemistry, Engineering, or Material Science or related. o Understands Theory, but has hands-on experience of materials, manufacturing technique, etc. Additional Information Job Status: Full time Eligiblity: EAD GC or GC or US Citizens Share the Profiles to ************************** Contact: ************ Keep the subject line with Job Title and Location

• Experience: o 10 to15 years experience in materials engineering in a manufacturing environment for products made of plastic, paper, or related materials o Hands-on floor-level leadership experience in a light manufacturing environment with high volume component products o Experience with manufactured products made from materials with extruded plastic, laminated materials, or other sophisticated raw materials of paper or plastic desired o Process experience in extrusion or laminating of materials, injection molding, or other similar continuous manufacturing process operations ideal o Materials experience in plastics, polyester, polyimide, polyethylene, styrene, Nomex, Mylar, etc. o Experience with adhesives, solvents, etc. o Knowledge of manufacturing systems with mechanical, electrical, or pneumatic processes o Experience in lab or testing facilities leading to manufacturing a product • Communications: o Excellent verbal and written communication skills in a union and non-union production facility o Decisive and can make decisions on-the-go with limited data o Open-minded, educator/mentor, problem solver, people person, dedicated o Bias for action and attention to detail Qualifications • Education: o Bachelor's degree in Chemistry, Engineering, or Material Science or related. o Understands Theory, but has hands-on experience of materials, manufacturing technique, etc. NOTE: This position is based in Wooster, Ohio or Ft. Wayne, Indiana. Please look for candidates within 75 miles of either location Additional Information Job Status: Full Time Eligibility: H1B or EAD GC or GC or USC Contact: ************ Share the Profiles to [email protected] Keep the subject line with Job Title and Location NOTE: This position is based in Wooster, Ohio or Ft. Wayne, Indiana. Please look for candidates within 75 miles of either location

• Experience: o 10 to15 years experience in materials engineering in a manufacturing environment for products made of plastic, paper, or related materials o Hands-on floor-level leadership experience in a light manufacturing environment with high volume component products o Experience with manufactured products made from materials with extruded plastic, laminated materials, or other sophisticated raw materials of paper or plastic desired o Process experience in extrusion or laminating of materials, injection molding, or other similar continuous manufacturing process operations ideal o Materials experience in plastics, polyester, polyimide, polyethylene, styrene, Nomex, Mylar, etc. o Experience with adhesives, solvents, etc. o Knowledge of manufacturing systems with mechanical, electrical, or pneumatic processes o Experience in lab or testing facilities leading to manufacturing a product • Communications: o Excellent verbal and written communication skills in a union and non-union production facility o Decisive and can make decisions on-the-go with limited data o Open-minded, educator/mentor, problem solver, people person, dedicated o Bias for action and attention to detail Qualifications • Education: o Bachelor's degree in Chemistry, Engineering, or Material Science or related. o Understands Theory, but has hands-on experience of materials, manufacturing technique, etc. NOTE: This position is based in Wooster, Ohio or Ft. Wayne, Indiana. Please look for candidates within 75 miles of either location Additional Information Job Status: Full Time Eligibility: H1B or EAD GC or GC or USC Contact: ************ Share the Profiles to [email protected] Keep the subject line with Job Title and Location NOTE: This position is based in Wooster, Ohio or Ft. Wayne, Indiana. Please look for candidates within 75 miles of either location