Senior electrical engineer jobs in Chicopee, MA - 271 jobs

Basic Qualifications Requires a Bachelor's degree in Electrical Engineering, or a related Science, Engineering, Technology or Mathematics field. Also requires 8+ years of job-related experience, or a Master's degree plus 6 years of job-related experience. CLEARANCE REQUIREMENTS: Department of Defense Secret security clearance is required within a reasonable period of time. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position ROLE AND POSITION OBJECTIVES: As the Electrical Hardware Design Lead, you and your team will be responsible for guiding multiple electrical subsystems and their components from concept to final installation in a program that introduces new, innovative capabilities into an existing system. Your technical expertise will drive the team through architecture and requirements discussions, hardware component selection and design (including PCB and FPGA), testing (design verification and qualification), and integration, all while adhering to schedule and budget constraints. Your ability to effectively communicate with other disciplines and program management will facilitate an iterative, risk-based approach to developing a technical solution. What sets you apart: Ahead of technology trends with Research & Development (R&D) experience, as well as advanced proficiency in test, troubleshooting, and analyzing circuit card schematics Motivated to drive innovation around design architectures, assembly, component selection, and electronics design Exceptional collaboration and communication skills with demonstrated success leading design teams for complex projects Team player committed to ongoing professional development for yourself and others Knowledge of implementation of hardware encryption algorithms What sets you apart: Ahead of technology trends with Research & Development (R&D) experience, as well as advanced proficiency in test, troubleshooting, and analyzing circuit card schematics Motivated to drive innovation around design architectures, assembly, component selection, and electronics design Exceptional collaboration and communication skills with demonstrated success leading design teams for complex projects Team player committed to ongoing professional development for yourself and others Knowledge of implementation of hardware encryption algorithms Our Commitment to You: An exciting career path with opportunities for continuous learning and development. Research oriented work, alongside award winning teams developing practical solutions for our nation's security Flexible schedules with every other Friday off work, if desired (9/80 schedule) Competitive benefits, including 401k matching, flex time off, paid parental leave, healthcare benefits, health & wellness programs, employee resource and social groups, and more See more at gdmissionsystems.com/careers/why-work-for-us/benefits Workplace Options: This position is fully on-site. While on-site, you will be a part of our Pittsfield, Massachusetts facility. We invite you to learn more and apply at: GDMS Careers Salary Note This estimate represents the typical salary range for this position based on experience and other factors (geographic location, etc.). Actual pay may vary. This job posting will remain open until the position is filled. Combined Salary Range USD $142,696.00 - USD $158,303.00 /Yr. Company Overview General Dynamics Mission Systems (GDMS) engineers a diverse portfolio of high technology solutions, products and services that enable customers to successfully execute missions across all domains of operation. With a global team of 12,000+ top professionals, we partner with the best in industry to expand the bounds of innovation in the defense and scientific arenas. Given the nature of our work and who we are, we value trust, honesty, alignment and transparency. We offer highly competitive benefits and pride ourselves in being a great place to work with a shared sense of purpose. You will also enjoy a flexible work environment where contributions are recognized and rewarded. If who we are and what we do resonates with you, we invite you to join our high-performance team! Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans

H2M is actively seeking a Project Engineer in our Electrical Department to support our growth in a variety of market sectors who will be responsible for: Project design and development tasks, including drawings, calculations, cost estimates, and specifications related specifically to public and commercial building types. Design of electrical systems such as power distribution, lighting and fire alarm. Project coordination with other engineering and architecture departments. Client relationships and responding to questions and comments Construction administration including attending project meetings, reviewing contractor submittals and providing clarifications when required. Other responsibilities as assigned. The ideal candidate will possess the following: Bachelor's degree in Electrical Engineering from an accredited program 5+ years of experience with a consulting engineering firm designing power, distribution, lighting, and fire alarm systems EIT, PE preferred High level of technical performance with strong work ethic Ability to work productively and cooperatively with team members and clients Strong verbal and written communication skills Advanced knowledge of Microsoft Office Working knowledge of AutoCAD, Revit, and Easy Power desired Experience with IT infrastructure and network communications a plus. The salary range for this role is $80,000 - $120,000 annually. The employment offer may deviate from the published range based on a variety of factors, including but not limited to, experience, specialty, knowledge, education, geography and/or related certifications - not related to any applicant's characteristics protected by local, state or federal law. Note: The salary or hourly rate indicated does not include other forms of compensation or benefits.

At Rimkus, our Built Environment Solutions team operates on a global scale with the advantage of local expertise. Our licensed engineers, architects, and technical specialists bring deep knowledge of regional requirements and industry best practices, enabling us to deliver customized, high-quality solutions that maximize the success of our clients' investments. With a comprehensive portfolio that spans nearly every engineering and architectural discipline, we help organizations plan, build, and manage assets with confidence. What sets us apart is our forward-thinking approach. We integrate carbon footprint reduction, resiliency, maintainability, and long-term sustainability into everything we do helping clients not just meet today's needs but prepare for tomorrow's challenges. From design and pre-construction through construction, closeout, and ongoing operations, we provide tailored support at every stage. By identifying potential issues before they arise, we mitigate risks, extend asset life, and reduce costly unplanned repairs. Whether an asset is newly constructed, leased, or purchased, our innovative solutions empower clients to operate more efficiently and sustainably. Joining Rimkus means being part of a team that's shaping the future of the built environment-one smart, resilient solution at a time. OVERVIEW The Electrical Design Engineer is experienced in the design of electrical and fire systems for the commercial real estate development industry. In this role, you will work with a team of engineers designing electrical and fire alarm systems for commercial, institutional, industrial, and multi-unit residential facilities. The salary range for this position is $130,000.00 - $150,000.00 and is dependent on education, experience, location, and certifications/licensure. ESSENTIAL JOB FUNCTIONS: * Applies technical knowledge to design solutions for complex and unique problems. * Electrical system design for distribution, power, fire alarm, and lighting for commercial and residential projects. * Manages multiple projects. * Uses many different equations, applications, and figures to ensure the proper procedure application, including electrical load and short circuit calculations * Perform existing conditions as-built documentation. * Coordinate with mechanical and plumbing engineers on projects. * Perform system evaluation and report generation. * Review submittals and perform final inspections on installations. * Ability to initiate, develop, and maintain mutually beneficial client relationships. * Understands and applies the National Electrical Code, NFPA 72, and MA State Building and Energy codes. * Coordination with other engineering team members. REQUIRED EXPERIENCE, EDUCATION, and CERTIFICATIONS: * B.S. Electrical Engineering degree or higher. * P.E. Preferred but not required (must be able to obtain). * Minimum of 10 years of experience in a similar/relevant position. * Electrical and fire systems design. * AutoCAD MEP and Revit experience strongly desired. * Familiar with the National Electrical Code, NFPA 72, and MA state building and energy codes. REQUIRED SKILLS AND ABILITIES: * The employee must be sharp, focused, and alert when conducting site inspections, speaking and interacting with clients, preparing written reports of findings, and testifying in deposition or trial. Clear vision and depth perception are also necessary. * Working knowledge of AutoCAD, Revit, Outlook, Word, and Excel. * Knowledge of electrical systems and designs for commercial, retail, and high-rise residential buildings. * Experience coordinating with disciplines internally as well as externally with consultants/architects. * Experience conducting and attending site visits, as well as preparing site reports. PHYSICAL DEMANDS, OVERTIME, and TRAVEL * Physical Demands - Work will be performed both in an office setting and at outside locations (i.e., client's office, industrial, construction, and/or residential sites). The employee is frequently required to stand, sit, climb ladders, bend, balance, stoop, kneel, crouch, talk, hear, and drive a motor vehicle to job sites. Employees may lift and/or move up to 50 pounds. Employees must be sharp, focused, and alert when conducting site inspections, speaking, and interacting with clients, as well as preparing drawings and written reports. Clear vision and depth perception are also necessary. * Overtime - This position is classified as salaried with an exempt FLSA status. Regular working hours are 8:00 a.m. to 5:00 p.m., Monday through Friday, with one hour for lunch. There will be periods where overtime will be required, which the employee will need to comply with in order to meet the demands of the position. * Travel Requirements - This position requires up to 25% travel. Some out-of-area and overnight travel may be required. Additional Information: NOW IS THE TIME to join this growing and stable company! We offer our full-time employees a competitive salary, bonus opportunities, and a complete benefits package that includes medical, dental, vision, life, disability, employer-matching 401(k), and opportunities for advancement! (*************** At Rimkus, we value a diverse and inclusive workplace where all employees feel valued and respected. We are committed to creating a work environment that supports and celebrates the unique perspectives and experiences of all employees. If you share our commitment to diversity and inclusivity and are excited about joining a welcoming and supportive team, we encourage you to apply for our open positions. Rimkus is an Equal Employment Opportunity (EEO) Employer and will make all employment-related decisions without regard to race, color, religion, sex, sexual orientation, gender identity, genetic information, national origin, disability, or protected veteran status. THIS JOB DESCRIPTION IS SUBJECT TO CHANGE AND DOES NOT CONSTITUTE A CONTRACT FOR EMPLOYMENT OR A GUARANTEE OF CONTINUED EMPLOYMENT. #LI-AL1 #LI-HYBRID

LiquidPiston is revolutionizing combustion engine technology through the development of advanced rotary engines and integrated hybrid power systems. Our innovative designs aim to dramatically improve efficiency, reduce size and weight, and enable cleaner, more compact power solutions across defense, aerospace, and commercial sectors. Position Overview We are seeking a highly skilled and motivated Senior Power Electronics Engineer to join our growing Electrical Engineering team. In this role, you will lead the development of advanced power conversion systems for hybrid power solutions, including clean-sheet designs for inverters, converters, and motor control systems. You will play a key role in supporting power electronics integration for next-generation generator sets, hybrid powertrains, and electrified propulsion systems. Key Responsibilities Lead clean-sheet design and development of AC/DC and DC/DC power converters, including bidirectional inverters and battery chargers. Perform magnetics and filter design, system-level integration, and EMI hardening for military-grade systems. Design and implement high-speed switching power electronics with 4-quadrant motor control and precise AC-DC regulation. Conduct EMI/EMC testing, troubleshooting, and compliance verification to DoD and MIL-STD requirements. Collaborate with mechanical, firmware, and systems engineers to deliver compact, efficient, and ruggedized power solutions. Document designs and results using Microsoft Office tools and contribute to technical reports and presentations. Interface with vendors, customers, and multidisciplinary project teams throughout the product lifecycle. Required Qualifications Bachelor's or Master's degree in Electrical Engineering, Power Electronics, or related field. Demonstrated expertise in: Bidirectional inverters, DC/DC converter topologies, and magnetics/filter design EMI hardening and compliance testing for defense applications High-speed switching and motor control (4-quadrant) Familiarity with AC-DC regulation principles and practical circuit implementation. Proficiency with MS Office (Word, Excel, PowerPoint). Must be a U.S. Person (Citizen or Permanent Resident) authorized to work in the United States. Preferred Qualifications Experience with weight- and efficiency-critical designs (e.g., aerospace, defense, UAVs). Background in hybrid power systems, gensets, and MIL-STD compliant systems (e.g., AMMPS). Knowledge of CANBUS/MODBUS communication protocols. Hands-on experience with PCB layout and design tools such as EAGLE or Altium. Firmware development experience (C/C++ preferred). Project management skills with experience coordinating across teams and with external stakeholders. Benefits Flexible PTO to encourage work-life balance and personal well-being Comprehensive healthcare coverage: medical, dental, and vision plans Equity participation: RSUs for all permanent employees 401(k) with match: 100% up to 3%, plus 50% match for 3-5% range Growth opportunities: Mentorship, training, and leadership development Our Culture At LiquidPiston, we challenge convention and solve hard problems. We move fast, think boldly, and iterate quickly. Our team thrives on collaboration, creativity, and resilience. We take calculated risks and believe that every setback is a steppingstone toward breakthrough innovation. Equal Opportunity Employer LiquidPiston, Inc. is proud to be an Equal Opportunity Employer. All qualified applicants will receive consideration for employment regardless of race, color, religion, gender, sexual orientation, gender identity, national origin, or veteran status, and will not be discriminated against on the basis of disability. All offers of employment at LiquidPiston are contingent upon the successful completion of a pre-employment background check and drug screening. Powered by JazzHR QfNfPjOqsQ

We are looking for a highly motivated and technically sound individual to join our Electrical Design Engineering team. This is in a department known as Environmental Controls & Life Support Systems. Electrical Design Engineering designs electronics that are required to drive electromechanical components to life support systems for Navy and Space applications. Some of these products include: process controllers, sensor signal conditioning, DC/DC Converters, FPGA based digital controllers, brushless DC motor controllers, actuator control/drives, hardware based closed loop system process control, high power (200KW) power conversion and more. These electrical products are typically controllers driving rotating machinery (pumps/fans/actuators) and have built in sensor/data acquisition systems with serial interface controls. They are designed for long life, high reliability and the ability to operate in severe space radiation environments as well as high vibratory and shock load environments. The ideal candidate must be capable of designing, troubleshooting, and field servicing high power equipment for submarine applications in a low cost environment. Power Electronic Requirements • Extensive experience with power electronics (100kW) including use of IGBT, SCR, Relays, Rectifiers and FETs as a minimal. Experience with AC induction motors is a plus. • Familiarity with 440AC, 3 phase power per MIL-STD-1399 • Experience in selection and integration of COTS equipment into our product along with custom design General Design Experience • Experience in mixed signal Analog/Digital board design • Experience with microprocessor architecture and design is a plus. • The candidate should possess a diverse set of skills that includes the development of electrical system architecture, trade studies, requirements derivation, requirements allocation and analysis to support the allocations to electrical products designed both in-house as well as analysis for allocations to supplier items. Those supplier items can be, but not limited to: actuators, fans pumps, sensors, brushless DC motors, heaters and stepper motors. • The candidate should have a good practical understanding of EMC requirements equivalent to MIL-STD-461 and have the ability to assess project specific power quality requirements to understand and manage risks during the proposal, architecture development, design and qualification phases. • The candidate will be required to interface with customers during proposal, architecture development, systems requirements reviews, design reviews, test readiness reviews and technical interchange meetings. This requires the ability to communicate across technical and management disciplines professionally, effectively and independently through presentations, reports, and electronic media to support programs in both a customer lead role with suppliers and in a supplier role to major customers. Experience / Qualifications 6+ years direct detailed active involvement in the attributes described above is required. Highly Desired Capabilities • Support the Electrical Designers by providing guidance and recommendations for electrical/electronic component parts selection for high reliability space applications • Generate Procurement drawings and specifications for Electrical Components for space applications. • Translate Flight-quality electrical parts lists into commercial parts lists to support procurement of commercial parts for the Engineering Development process; this task includes locating distributors' inventory to expedite the procurement process. • Work with Purchasing to resolve technical issues with various Component Manufacturers. 5+ to 7 years experience Additional Information All your information will be kept confidential according to EEO guidelines.

Country: United States of America Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract. Security Clearance: None/Not Required Joining Collins Aerospace isn't just about finding a job; it's about embarking on a journey to redefine the future of aerospace technology. Collins Aerospace, an RTX company, is a leader in technologically advanced and intelligent solutions for the global aerospace and defense industry. Collins Aerospace has the capabilities, comprehensive portfolio, and expertise to solve customers' toughest challenges and to meet the demands of a rapidly evolving global market. What You Will Do: Requirements capture, ASIC / FPGA digital architecture and design using RTL, verification, and system integration. Be involved in design, implementation, verification, and integration of a wide variety of high-performance digital ASICs and FPGAs. This position will have an emphasis on PCB and system-level design incorporating analog and digital functions. Qualifications You Must Have: Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and minimum 2 years of prior relevant experience or an Advanced Degree in a related field. RTL coding and simulation in VHDL, Verilog, or SystemVerilog. Performs engineering work and applied research, development, and Printed Circuit Board (PCB) design for new products to ensure quality standards and functional objectives are met. Experience in designing digital and analog products including FPGA systems, low-power supplies, motor controls. Experience creating engineering and production test procedures. Experience with debugging and root cause investigations on hardware using hardware schematics, integrated FPGA vendor debug tools, and digital lab equipment. U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract. Qualifications We Prefer: Experience using ASIC and/or FPGA design tools (e.g. Modelsim, Questa, Mentor Graphics/HDL designer, Libero, Quartus, Vivado or other FPGA-specific tools, Xpedition). Ability to work with minimal supervision, team with engineers of a variety of skills and backgrounds, and matrix into projects with aggressive schedules and frequent milestones. Strong oral and written communication skills with the ability to document and present one's work and status. Digital circuit architecture and resource tradeoffs. Experience with PCB design tools. Experience with supporting factory builds of PCBs and assemblies. Experience in requirements generation, validation, allocation and traceability. Familiarity with the signal processing system simulation & analysis tools (e.g. Matlab, Simulink). Familiarity with revision control concepts and tools (e.g. Git, Subversion). Do you want to be a part of something bigger? A team whose impact stretches across the world, and even beyond? At Collins Aerospace, our Mission Systems team helps civilian, military and government customers complete their most complex missions - whatever and wherever they may be. Our customers depend on us for intelligent and secure communications, missionized systems for specialized aircraft and spacecraft and collaborative space solutions. By joining our team, you'll have your own critical part to play in ensuring our customer succeeds today while anticipating their needs for tomorrow. Are you up for the challenge? Join our mission today. What We Offer: Medical, dental, and vision insurance Three weeks of vacation for newly hired employees Generous 401(k) plan that includes employer matching funds and separate employer retirement contribution, including a Lifetime Income Strategy option Tuition reimbursement program Student Loan Repayment Program Life insurance and disability coverage Optional coverages you can buy pet insurance, home and auto insurance, additional life and accident insurance, critical illness insurance, group legal ID theft protection Birth, adoption, parental leave benefits Ovia Health, fertility, and family planning Adoption Assistance Autism Benefit Employee Assistance Plan, including up to 10 free counseling sessions Healthy You Incentives, wellness rewards program Doctor on Demand, virtual doctor visits Bright Horizons, child and elder care services Teladoc Medical Experts, second opinion program And more! Learn More & Apply Now! *Please ensure the role type (defined below) is appropriate for your needs before applying to this role. Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. At Collins, the paths we pave together lead to limitless possibility. And the bonds we form - with our customers and with each other -- propel us all higher, again and again. Apply now and be part of the team that's redefining aerospace, every day. As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 68,900 USD - 131,100 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

**Country:** United States of America ** Onsite **U.S. Citizen, U.S. Person, or Immigration Status Requirements:** U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract. **Security Clearance:** None/Not Required Joining Collins Aerospace isn't just about finding a job; it's about embarking on a journey to redefine the future of aerospace technology. Collins Aerospace, an RTX company, is a leader in technologically advanced and intelligent solutions for the global aerospace and defense industry. Collins Aerospace has the capabilities, comprehensive portfolio, and expertise to solve customers' toughest challenges and to meet the demands of a rapidly evolving global market. **What You Will Do:** + Requirements capture, ASIC / FPGA digital architecture and design using RTL, verification, and system integration. + Be involved in design, implementation, verification, and integration of a wide variety of high-performance digital ASICs and FPGAs. + This position will have an emphasis on PCB and system-level design incorporating analog and digital functions. **Qualifications You Must Have:** + Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and minimum 2 years of prior relevant experience **or** an Advanced Degree in a related field. + RTL coding and simulation in VHDL, Verilog, or SystemVerilog. + Performs engineering work and applied research, development, and Printed Circuit Board (PCB) design for new products to ensure quality standards and functional objectives are met. + Experience in designing digital and analog products including FPGA systems, low-power supplies, motor controls. + Experience creating engineering and production test procedures. + Experience with debugging and root cause investigations on hardware using hardware schematics, integrated FPGA vendor debug tools, and digital lab equipment. + U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract. **Qualifications We Prefer:** + Experience using ASIC and/or FPGA design tools (e.g. Modelsim, Questa, Mentor Graphics/HDL designer, Libero, Quartus, Vivado or other FPGA-specific tools, Xpedition). + Ability to work with minimal supervision, team with engineers of a variety of skills and backgrounds, and matrix into projects with aggressive schedules and frequent milestones. + Strong oral and written communication skills with the ability to document and present one's work and status. + Digital circuit architecture and resource tradeoffs. + Experience with PCB design tools. + Experience with supporting factory builds of PCBs and assemblies. + Experience in requirements generation, validation, allocation and traceability. + Familiarity with the signal processing system simulation & analysis tools (e.g. Matlab, Simulink). + Familiarity with revision control concepts and tools (e.g. Git, Subversion). Do you want to be a part of something bigger? A team whose impact stretches across the world, and even beyond? At Collins Aerospace, our Mission Systems team helps civilian, military and government customers complete their most complex missions - whatever and wherever they may be. Our customers depend on us for intelligent and secure communications, missionized systems for specialized aircraft and spacecraft and collaborative space solutions. By joining our team, you'll have your own critical part to play in ensuring our customer succeeds today while anticipating their needs for tomorrow. Are you up for the challenge? Join our mission today. **What We Offer:** + Medical, dental, and vision insurance + Three weeks of vacation for newly hired employees + Generous 401(k) plan that includes employer matching funds and separate employer retirement contribution, including a Lifetime Income Strategy option + Tuition reimbursement program + Student Loan Repayment Program + Life insurance and disability coverage + Optional coverages you can buy pet insurance, home and auto insurance, additional life and accident insurance, critical illness insurance, group legal ID theft protection + Birth, adoption, parental leave benefits + Ovia Health, fertility, and family planning + Adoption Assistance + Autism Benefit + Employee Assistance Plan, including up to 10 free counseling sessions + Healthy You Incentives, wellness rewards program + Doctor on Demand, virtual doctor visits + Bright Horizons, child and elder care services + Teladoc Medical Experts, second opinion program + And more! **Learn More & Apply Now!** *Please ensure the role type (defined below) is appropriate for your needs before applying to this role. **Onsite:** Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. At Collins, the paths we pave together lead to limitless possibility. And the bonds we form - with our customers and with each other -- propel us all higher, again and again. Apply now and be part of the team that's redefining aerospace, every day. **_As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote._** The salary range for this role is 68,900 USD - 131,100 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. _RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act._ **Privacy Policy and Terms:** Click on this link (******************************************************** to read the Policy and Terms Raytheon Technologies is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class.

The Mixed Signal Hardware Engineer will design and build mixed signal circuit cards which are used to interface to the customers device under test. These circuit cards include both digital and analog circuits used to provide switching, loads and signal conditioning in a test system! The Senior Hardware Engineer will be directly responsible for product design and validation along with reviewing designs of other engineers and mentoring new team members! **Key Qualifications** + Passionate in continuous learning and working with analog, digital, & other computer technologies + Board level digital circuit design expertise + Proficient in signal integrity analysis and measurement techniques + Experience defining routing constraints for high-speed interfaces + Experience in circuit design with CPU/SoC/Micro-controller + Experience with engineering design tools and schematic design + Proficiency with standard hardware lab equipment including scopes, logic analyzers, signal generators and power supplies. + Test automation expertise with scripting/programming language + HDL experience **Description** + Developing hardware features based on requirements + Technology research, circuit design, schematics capture, layout review and simulation + FPGA and CPLD development + Products bring-up, test and debugging + Signal integrity analysis + Debugging and resolving system level issues **Required Qualifications** + Bachelor's or Master's degree in Electrical/Electronic Engineering is required + Minimum 5 years of digital hardware design experience (board level design or VHDL/SystemVerilog) + US person (citizen or green card holder) + **Authorized to work in the United States without sponsorship now and in the future** + **Individuals with temporary visas such as E, F-1 (including those with OPT or CPT), H-1, H-2, L-1, B, J or TN, or who need sponsorship for work authorization now or in the future, are not eligible for hire.** Our Culture & Commitment to You At Emerson, we prioritize a workplace where every employee is valued, respected, and empowered to grow. We foster an environment that encourages innovation, collaboration, and diverse perspectives-because we know that great ideas come from great teams. Our commitment to ongoing career development and growing an inclusive culture ensures you have the support to thrive. Whether through mentorship, training, or leadership opportunities, we invest in your success so you can make a lasting impact. We believe diverse teams, working together are key to driving growth and delivering business results. We recognize the importance of employee wellbeing. We prioritize providing flexible, competitive benefits plans to meet you and your family's physical, mental, financial, and social needs. We provide a variety of medical insurance plans, with dental and vision coverage, Employee Assistance Program, 401(k), tuition reimbursement, employee resource groups, recognition, and much more. Our culture offers flexible time off plans, including paid parental leave (maternal and paternal), vacation and holiday leave. **WHY EMERSON** **Our Commitment to Our People** At Emerson, we are motivated by a spirit of collaboration that helps our diverse, multicultural teams across the world drive innovation that makes the world healthier, safer, smarter, and more sustainable. And we want you to join us in our bold aspiration. We have built an engaged community of inquisitive, dedicated people who thrive knowing they are welcomed, trusted, celebrated, and empowered to solve the world's most complex problems - for our customers, our communities, and the planet. You'll contribute to this vital work while further developing your skills through our award-winning employee development programs. We are a proud corporate citizen in every city where we operate and are committed to our people, our communities, and the world at large. We take this responsibility seriously and strive to make a positive impact through every endeavor. At Emerson, you'll see firsthand that our people are at the center of everything we do. So, let's go. Let's think differently. Learn, collaborate, and grow. Seek opportunity. Push boundaries. Be empowered to make things better. Speed up to break through. Let's go, together. **Work Authorization** Emerson will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1(including those with OPT or CPT) , H-1, H-2, L-1, B, J or TN, or who need sponsorship for work authorization now or in the future, are not eligible for hire. **Equal Opportunity Employer** Emerson is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to sex, race, color, religion, national origin, age, marital status, political affiliation, sexual orientation, gender identity, genetic information, disability or protected veteran status. We are committed to providing a workplace free of any discrimination or harassment. **Accessibility Assistance or Accommodation** If you have a disability and are having difficulty accessing or using this website to apply for a position, please contact: idisability.administrator@emerson.com . **ABOUT EMERSON** Emerson is a global leader in automation technology and software. Through our deep domain expertise and legacy of flawless execution, Emerson helps customers in critical industries like life sciences, energy, power and renewables, chemical and advanced factory automation operate more sustainably while improving productivity, energy security and reliability. With global operations and a comprehensive portfolio of software and technology, we are helping companies implement digital transformation to measurably improve their operations, conserve valuable resources and enhance their safety. We offer equitable opportunities, celebrate diversity, and embrace challenges with confidence that, together, we can make an impact across a broad spectrum of countries and industries. Whether you're an established professional looking for a career change, an undergraduate student exploring possibilities, or a recent graduate with an advanced degree, you'll find your chance to make a difference with Emerson. Join our team - let's go! **No calls or agencies please.** **Requisition ID** : 25026563 Emerson is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to sex, race, color, religion, national origin, age, marital status, political affiliation, sexual orientation, gender identity, genetic information, disability or protected veteran status. We are committed to providing a workplace free of any discrimination or harassment.

Global Steering Systems, LLC ("GSS") a subsidiary of Neapco, is a high-volume global manufacturer of automotive components, primarily steering columns. We supply our products to the world's leading auto manufacturers. We are a global company with international manufacturing facilities located in China, Poland and have over 300 employees working in our 180,000-square foot Watertown location. Our global business is built on a solid foundation of commitment not only to each other and our customers, but also to our core values of safety, performance, sustainability, and responsibility. This position will provide a combination of manufacturing engineering and electrical controls engineering services for new production equipment and all aspects of manufacturing to ensure that world-class products are available to our customers. This person will work independently with minimal supervision for most of the activities with a strong reliance on experience and good organizational skills. This person will act as a specialist and work with all levels of the organization. This position exists to improve efficiency, fix programming and mechanical related issues in a timely manner to reduce/ eliminate the equipment downtime. Their work affects equipment, employees, work environment and process standards and specifications. Responsibilities * Assist new products team with determining requirements and cost estimates for machines that are built in-house and by outside suppliers. Ensure compliance of the GSS, Watertown machine specification for new acquisitions and retrofits. * Designs, develops, tests, sources, cost justifies, and installs various tools, devices, modifications, fixturing, machinery and equipment for production to increase safety, throughput, quality, capacity, and reliability. Manage the completion of those projects from conception through evaluation, justification, purchase, and implementation. * Lead projects, create timing plans, design control systems, create schematics, order components, write programs, debug machines and provide support after launch. * Coordinate with all levels of the organization to meet project timing and budget * Integrate vision inspection, process monitoring, servo control, mechanical inspections, and other devices or processes into new and existing equipment. * Champion innovative techniques to improve manufacturing processes. * Develop, debug, and validate control systems including electrical, PLC, hydraulic, pneumatic, servo, HMI's, etc. * Generate and implement standards and best practices - Logic, machine design, process, etc. * Ensure that logic systems documentation is complete, up to date, stored in file structure, and available at all times. * Provide general supervision to outside contractors (electrical, mechanical, PLC programming, etc.) to resolve material and/or equipment problems, research and implement upgrades, new tools and operating procedures. * Work with Operators, Supervisors, Maintenance and QA department to improve processes and troubleshoot equipment repair and maintenance. Support diverse portfolio of processes and controls hardware. * Ensure proper training and guidance is provided to GSS Production team. * Apply Lean Mfg. / Toyota production system principles, IATF 16949, FMEA and Control plan concepts in controls engineering initiatives and tasks. * Review existing logic programs to ensure safety of all associates and the processes are efficient & error proofed. * Work closely with the Safety Team to ensure electrical controls and processes meet ergonomic and other safety standards. * Champion continuous improvement projects to enhance safety, productivity, quality, reliability, capacity and processes. Project manage & coordinate implementation of continuous improvement actions. * Ensures manufacturing practices are current, consistent, and compliant with GSS Policies and Procedures, all external state/federal regulations and customer requirements. * Demonstrate a leadership mindset holding themselves and their team to high standards to ensure timely and successful project execution. Encourage working cross functionally and collaboratively. The above are principal responsibilities and do not identify all duties inherent in the job. Experience and Education Requirements * BS Electrical, Mechatronics, Mechanical Engineering or equivalent * Minimum of three years related to manufacturing experience in electrical, manufacturing, industrial engineering, or related field Competencies - Knowledge, skills and characteristics/behaviors * Experience in manufacturing, quality, safety and management is essential. * Experience with Controls Systems including: * Allen Bradley PLCs, Kinetix Motion Controls (Studio 5000 programming software), and HMIs (FactoryTalk Studio) * GE PLCs (Proficy Machine Edition software) * Siemens PLCs * Robotics * Knowledge of ladder logic programming * SQL, Database structure, Data collection systems. * Diagnostic and troubleshooting skills. * Organizational and project management skills with the ability to prioritize and self-initiate when necessary. * Knowledge of tool design, gage design, and fixture design. * Computer skills include demonstrated knowledge of Microsoft office. * Working knowledge of plant/facilities engineering, electronics, pneumatics and engineering controls. * Excellent interpersonal, communication, organizational skills, and collaborative team player. * Broad-base knowledge of Lean Manufacturing, including 5s, Kaizen, Kanban, Poke-a-Yoke, Process Mapping & Value Stream Mapping, other tools & Techniques * Strong analytical & problem-Solving Skills (Experience of proven techniques a plus ie. Shainin, DOE, 6 Sigma, 8D, 5 Why, etc.) * Continuous Improvement mindset with ability to lead and influence others. * Mechatronics experience and interests * Python, Visual Basic (VBA), Ignition!, IIOT, I4.0 are a plus * Experience with Controls Systems including: * DirectLogic PLCs (DirectSoft programming software) knowledge is a plus * FANUC, ABB, and UR Robotics is a plus * Cognex vision systems is a plus * Equipment development, tooling design, gage design, CAD (NX, AutoCAD) is a strong plus * ISO 14001 and IATF 16949 experience is a strong plus. * Knowledge of Automotive AIAG Core tools (FMEA, Control Plan, PPAP, MSA, SPC) is a strong plus. Additional Notes * Able to lift up to 35 pounds. * Ability and Willingness to travel internationally * Able to work in staggered or 2nd shift when necessary * Relocation assistance not provided * Applicants must be authorized to work in the United States/unable to provide visa sponsorship currently

Job DescriptionDescription: Full time 1st shift (6:00 a.m.-3:00 p.m.) LOCAL CANDIDATES ONLY - Relocation Not Available The Controls & Automation Engineer is responsible for designing, programming, and implementing robust automation and control systems that support manufacturing operations. This role ensures production processes run efficiently, safely, and at the highest quality, while driving continuous improvement through system upgrades, optimization, and integration of Industry 4.0 technologies. The engineer will serve as both a project lead and collaborative team member, working with engineers, project managers, vendors, and customers to deliver effective, reliable automation solutions. Design, program, and support automation and control systems, including PLCs, HMIs, robotics, motion control, and SCADA systems. Develop and review electrical control schematics, wiring diagrams, panel layouts, and Bills of Material in compliance with standards. Lead or support automation projects from concept through installation, commissioning, and validation. Collaborate cross-functionally (production, maintenance, quality, IT, and customer teams) to ensure seamless system integration and high levels of collaboration. Diagnose, troubleshoot, and resolve equipment malfunctions to minimize downtime and ensure manufacturing efficiency. Drive continuous improvement through automation enhancements, process optimization, lean practices, and data integration. Ensure compliance with safety standards, regulatory requirements, quality systems, and company policies. Maintain complete documentation for control systems, including CAD drawings, programs, and technical manuals. Train maintenance, operations, and customer personnel on automated equipment and systems. Stay current with emerging technologies in industrial automation and recommend upgrades where appropriate. Requirements: Education: Bachelor's degree in Electrical Engineering (required). Experience: Minimum 5 years of experience in industrial automation, manufacturing controls, or related field (10+ years preferred). Technical Skills Strong knowledge of PLC programming (Allen-Bradley/Rockwell, Siemens, or similar). Experience with HMI/SCADA systems and industrial networks (Ethernet/IP, Profibus, Modbus, IO-Link, etc.). Proficiency in electrical design software (AutoCAD Electrical, SolidWorks Electrical, or equivalent). Hands-on experience with robotics, vision systems, sensors, drives, motion control, and pneumatic systems. Familiarity with SQL-based plant floor data gathering systems, MES, and Industry 4.0/Smart Manufacturing principles. Experience with plant-wide SCADA systems (Ignition, FactoryTalk, etc.) Experience with IT/OT networking and high-level languages (Visual Basic, C#, or similar). Core Competencies Strong problem-solving and analytical skills with ability to apply lean/continuous improvement principles. Ability to manage multiple projects simultaneously, serving as both a project lead and supporting engineer. Excellent written and verbal communication skills, with the ability to present to managers, customers, and vendors. Ability to work independently and in cross-functional teams. Ability to write reports, business correspondence and procedure manuals Ability to think critically. Proven track record of improving system reliability, efficiency, and integration through automation. Physical & Work Environment Requirements Ability to work in a manufacturing plant environment, including standing, walking, and occasional lifting. Occasional travel to vendors, customer sites, or other facilities may be required. Must follow all safety protocols and wear appropriate PPE when on the plant floor. Benefits We offer a competitive & market salary and a comprehensive benefits package including health insurance, dental, vision, life insurance, STD, LTD, 401(k), profit sharing. Riverdale Mills is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, genetics, disability, age, veteran status, or any other characteristic About Us Riverdale Mills Corporation is one of the largest manufacturers of galvanized and PVC coated welded wire mesh in the world. A privately held company based in Northbridge, MA. Riverdale Mills specializes in the design and manufacturing of commercial, industrial and consumer wire products, tools and accessories for the marine, aquaculture, security, and construction and farming industries. The company's exemplary quality and manufacturing expertise is known worldwide.

This position supports the engineering and design needs of the control panel and process electrical design. This position will engage with various internal and external resources to gather data for best-in-class design and final products. External resources include manufacturer representatives and customer personnel. Responsibilities Develop electrical and controls system design solutions based on engineering principles. Evaluate P&IDs to determine I/O requirements. Develop electrical schematics, panel layouts, and BOM's. Design and facilitate production of control panels per NEC & UL standards. Maintain a neat, clean, and efficient work area daily. Develop and execute QC process for quality assurance. Provide support to field electricians to ensure projects are completed as scheduled. Qualifications Experience designing industrial electrical control systems. Experience in Electrical Construction Drawings Must have knowledge and understanding of AC / DC power circuits, pushbuttons, circuit breakers, power supplies, overloads, contactors, relays, motors, VFD's, PLC's Must have knowledge of National Electrical Code (NFPA 70) Design to UL Standards for Industrial Control Panels (UL508A) (preferred) Able to interpret NEC for Control Panel to meet the NEC and or field installation. Calculate conductor sizing, de-rating, temperature de-rating. Design to hazardous location requirements for class 1, class 2, division 1 & 2 requirements. (preferred) Design to IS requirements (UL698) (preferred) Perform three phase and single-phase load calculations Perform SCCR calculations Highly organized with strong analytical skills. Safety-minded and follow safety regulations Valid Driver's License Travel Potential for up to 25% travel to client sites to evaluate and detail clients existing conditions. Specific/Special Skills Strong software knowledge in Microsoft Word, Excel and Outlook. Familiarity with AutoCAD, ePLAN, Plant 3D, Revit or similar programs. Education Technical/other training or better in Automatic Control Systems (preferred) About Us We plan, design, engineer, and build food plants for major brands across the country and the world. For the past three decades, we've focused exclusively on the food and beverage industry, helping your favorite brands put your favorite foods in the grocery store. Simply put, food isn't one thing we do, it's all we do. Dennis Group offers competitive compensation packages commensurate with experience. We provide comprehensive employee benefits including medical, dental, vision, life and disability insurance, paid time off including an open vacation policy, as well as bonus, profit-sharing, and retirement plans. Dennis Group is proud to provide equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or genetics. JOB CODE: 1002665

Basic Qualifications Requires a Bachelor's degree in Electrical Engineering, or a related Science, Engineering, Technology or Mathematics field. Also requires 5+ years of job-related experience, or a Master's degree plus 3 years of job-related experience. CLEARANCE REQUIREMENTS: Department of Defense Secret security clearance is obtainable within a reasonable amount of time after hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position Make the world's most advanced defense platforms even smarter. Our engineers redefine what's possible and our manufacturing team brings it to life, building the brains behind the brawn on submarines, ships, combat vehicles, aircraft, satellites, and other advanced systems. ROLE AND POSITION OBJECTIVES: As an Advanced Electrical Engineer for GDMS Test Engineering, you'll be a member of a cross functional team responsible for automated test requirements analysis, design, integration and verification of electrical components, equipment and systems. We encourage you to apply if you have any of these preferred skills or experiences: Automated Test Development , LabVIEW or TestStand development, Software Test design and/or Scripting (Perl, Java, C) What sets you apart: Proficient using electrical engineering computer-aided design (CAD) tools and mixed Signal circuit analysis/design Habitually ahead of technology trends, with background in test, troubleshooting, and reading circuit card schematics Motivated to drive innovation around design architectures, assembly, component selection, and electronics design Research & Development experience including concept, design, modeling, prototyping, and testing Collaborative team player committed to ongoing professional development for yourself and others Our Commitment to You: An exciting career path with opportunities for continuous learning and development. Research oriented work, alongside award winning teams developing practical solutions for our nation's security Flexible schedules with every other Friday off work, if desired (9/80 schedule) Competitive benefits, including 401k matching, flex time off, paid parental leave, healthcare benefits, health & wellness programs, employee resource and social groups, and more See more at gdmissionsystems.com/careers/why-work-for-us/benefits Workplace Options: This position is onsite with possible Hybrid/Flex options in the future. While on-site, you will be a part of the GDMS Pittsfield team. #LI-Hybrid Salary Note This estimate represents the typical salary range for this position based on experience and other factors (geographic location, etc.). Actual pay may vary. This job posting will remain open until the position is filled. Combined Salary Range USD $112,924.00 - USD $125,275.00 /Yr. Company Overview General Dynamics Mission Systems (GDMS) engineers a diverse portfolio of high technology solutions, products and services that enable customers to successfully execute missions across all domains of operation. With a global team of 12,000+ top professionals, we partner with the best in industry to expand the bounds of innovation in the defense and scientific arenas. Given the nature of our work and who we are, we value trust, honesty, alignment and transparency. We offer highly competitive benefits and pride ourselves in being a great place to work with a shared sense of purpose. You will also enjoy a flexible work environment where contributions are recognized and rewarded. If who we are and what we do resonates with you, we invite you to join our high-performance team! Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans

LiquidPiston is revolutionizing combustion engine technology through the development of advanced rotary engines and integrated hybrid power systems. Our innovative designs aim to dramatically improve efficiency, reduce size and weight, and enable cleaner, more compact power solutions across defense, aerospace, and commercial sectors. Position Overview We are seeking a highly skilled and motivated Senior Power Electronics Engineer to join our growing Electrical Engineering team. In this role, you will lead the development of advanced power conversion systems for hybrid power solutions, including clean-sheet designs for inverters, converters, and motor control systems. You will play a key role in supporting power electronics integration for next-generation generator sets, hybrid powertrains, and electrified propulsion systems. Key Responsibilities Lead clean-sheet design and development of AC/DC and DC/DC power converters, including bidirectional inverters and battery chargers. Perform magnetics and filter design, system-level integration, and EMI hardening for military-grade systems. Design and implement high-speed switching power electronics with 4-quadrant motor control and precise AC-DC regulation. Conduct EMI/EMC testing, troubleshooting, and compliance verification to DoD and MIL-STD requirements. Collaborate with mechanical, firmware, and systems engineers to deliver compact, efficient, and ruggedized power solutions. Document designs and results using Microsoft Office tools and contribute to technical reports and presentations. Interface with vendors, customers, and multidisciplinary project teams throughout the product lifecycle. Required Qualifications Bachelor's or Master's degree in Electrical Engineering, Power Electronics, or related field. Demonstrated expertise in: Bidirectional inverters, DC/DC converter topologies, and magnetics/filter design EMI hardening and compliance testing for defense applications High-speed switching and motor control (4-quadrant) Familiarity with AC-DC regulation principles and practical circuit implementation. Proficiency with MS Office (Word, Excel, PowerPoint). Must be a U.S. Person (Citizen or Permanent Resident) authorized to work in the United States. Preferred Qualifications Experience with weight- and efficiency-critical designs (e.g., aerospace, defense, UAVs). Background in hybrid power systems, gensets, and MIL-STD compliant systems (e.g., AMMPS). Knowledge of CANBUS/MODBUS communication protocols. Hands-on experience with PCB layout and design tools such as EAGLE or Altium. Firmware development experience (C/C++ preferred). Project management skills with experience coordinating across teams and with external stakeholders. Benefits Flexible PTO to encourage work-life balance and personal well-being Comprehensive healthcare coverage: medical, dental, and vision plans Equity participation: RSUs for all permanent employees 401(k) with match: 100% up to 3%, plus 50% match for 3-5% range Growth opportunities: Mentorship, training, and leadership development Our Culture At LiquidPiston, we challenge convention and solve hard problems. We move fast, think boldly, and iterate quickly. Our team thrives on collaboration, creativity, and resilience. We take calculated risks and believe that every setback is a steppingstone toward breakthrough innovation. Equal Opportunity Employer LiquidPiston, Inc. is proud to be an Equal Opportunity Employer. All qualified applicants will receive consideration for employment regardless of race, color, religion, gender, sexual orientation, gender identity, national origin, or veteran status, and will not be discriminated against on the basis of disability. All offers of employment at LiquidPiston are contingent upon the successful completion of a pre-employment background check and drug screening.

We are looking for a highly motivated and technically sound individual to join our Electrical Design Engineering team. This is in a department known as Environmental Controls & Life Support Systems. Electrical Design Engineering designs electronics that are required to drive electromechanical components to life support systems for Navy and Space applications. Some of these products include: process controllers, sensor signal conditioning, DC/DC Converters, FPGA based digital controllers, brushless DC motor controllers, actuator control/drives, hardware based closed loop system process control, high power (200KW) power conversion and more. These electrical products are typically controllers driving rotating machinery (pumps/fans/actuators) and have built in sensor/data acquisition systems with serial interface controls. They are designed for long life, high reliability and the ability to operate in severe space radiation environments as well as high vibratory and shock load environments. The ideal candidate must be capable of designing, troubleshooting, and field servicing high power equipment for submarine applications in a low cost environment. Power Electronic Requirements • Extensive experience with power electronics (100kW) including use of IGBT, SCR, Relays, Rectifiers and FETs as a minimal. Experience with AC induction motors is a plus. • Familiarity with 440AC, 3 phase power per MIL-STD-1399 • Experience in selection and integration of COTS equipment into our product along with custom design General Design Experience • Experience in mixed signal Analog/Digital board design • Experience with microprocessor architecture and design is a plus. • The candidate should possess a diverse set of skills that includes the development of electrical system architecture, trade studies, requirements derivation, requirements allocation and analysis to support the allocations to electrical products designed both in-house as well as analysis for allocations to supplier items. Those supplier items can be, but not limited to: actuators, fans pumps, sensors, brushless DC motors, heaters and stepper motors. • The candidate should have a good practical understanding of EMC requirements equivalent to MIL-STD-461 and have the ability to assess project specific power quality requirements to understand and manage risks during the proposal, architecture development, design and qualification phases. • The candidate will be required to interface with customers during proposal, architecture development, systems requirements reviews, design reviews, test readiness reviews and technical interchange meetings. This requires the ability to communicate across technical and management disciplines professionally, effectively and independently through presentations, reports, and electronic media to support programs in both a customer lead role with suppliers and in a supplier role to major customers. Experience / Qualifications 6+ years direct detailed active involvement in the attributes described above is required. Highly Desired Capabilities • Support the Electrical Designers by providing guidance and recommendations for electrical/electronic component parts selection for high reliability space applications • Generate Procurement drawings and specifications for Electrical Components for space applications. • Translate Flight-quality electrical parts lists into commercial parts lists to support procurement of commercial parts for the Engineering Development process; this task includes locating distributors' inventory to expedite the procurement process. • Work with Purchasing to resolve technical issues with various Component Manufacturers. 5+ to 7 years experience Additional Information All your information will be kept confidential according to EEO guidelines.

Global Steering Systems, LLC (“GSS”) a subsidiary of Neapco, is a high-volume global manufacturer of automotive components, primarily steering columns. We supply our products to the world's leading auto manufacturers. We are a global company with international manufacturing facilities located in China, Poland and have over 300 employees working in our 180,000-square foot Watertown location. Our global business is built on a solid foundation of commitment not only to each other and our customers, but also to our core values of safety, performance, sustainability, and responsibility. This position will provide a combination of manufacturing engineering and electrical controls engineering services for new production equipment and all aspects of manufacturing to ensure that world-class products are available to our customers. This person will work independently with minimal supervision for most of the activities with a strong reliance on experience and good organizational skills. This person will act as a specialist and work with all levels of the organization. This position exists to improve efficiency, fix programming and mechanical related issues in a timely manner to reduce/ eliminate the equipment downtime. Their work affects equipment, employees, work environment and process standards and specifications. Responsibilities Assist new products team with determining requirements and cost estimates for machines that are built in-house and by outside suppliers. Ensure compliance of the GSS, Watertown machine specification for new acquisitions and retrofits. Designs, develops, tests, sources, cost justifies, and installs various tools, devices, modifications, fixturing, machinery and equipment for production to increase safety, throughput, quality, capacity, and reliability. Manage the completion of those projects from conception through evaluation, justification, purchase, and implementation. Lead projects, create timing plans, design control systems, create schematics, order components, write programs, debug machines and provide support after launch. Coordinate with all levels of the organization to meet project timing and budget Integrate vision inspection, process monitoring, servo control, mechanical inspections, and other devices or processes into new and existing equipment. Champion innovative techniques to improve manufacturing processes. Develop, debug, and validate control systems including electrical, PLC, hydraulic, pneumatic, servo, HMI's, etc. Generate and implement standards and best practices - Logic, machine design, process, etc. Ensure that logic systems documentation is complete, up to date, stored in file structure, and available at all times. Provide general supervision to outside contractors (electrical, mechanical, PLC programming, etc.) to resolve material and/or equipment problems, research and implement upgrades, new tools and operating procedures. Work with Operators, Supervisors, Maintenance and QA department to improve processes and troubleshoot equipment repair and maintenance. Support diverse portfolio of processes and controls hardware. Ensure proper training and guidance is provided to GSS Production team. Apply Lean Mfg. / Toyota production system principles, IATF 16949, FMEA and Control plan concepts in controls engineering initiatives and tasks. Review existing logic programs to ensure safety of all associates and the processes are efficient & error proofed. Work closely with the Safety Team to ensure electrical controls and processes meet ergonomic and other safety standards. Champion continuous improvement projects to enhance safety, productivity, quality, reliability, capacity and processes. Project manage & coordinate implementation of continuous improvement actions. Ensures manufacturing practices are current, consistent, and compliant with GSS Policies and Procedures, all external state/federal regulations and customer requirements. Demonstrate a leadership mindset holding themselves and their team to high standards to ensure timely and successful project execution. Encourage working cross functionally and collaboratively. The above are principal responsibilities and do not identify all duties inherent in the job. Experience and Education Requirements BS Electrical, Mechatronics, Mechanical Engineering or equivalent Minimum of three years related to manufacturing experience in electrical, manufacturing, industrial engineering, or related field Competencies - Knowledge, skills and characteristics/behavior s Experience in manufacturing, quality, safety and management is essential. Experience with Controls Systems including: Allen Bradley PLCs, Kinetix Motion Controls (Studio 5000 programming software), and HMIs (FactoryTalk Studio) GE PLCs (Proficy Machine Edition software) Siemens PLCs Robotics Knowledge of ladder logic programming SQL, Database structure, Data collection systems. Diagnostic and troubleshooting skills. Organizational and project management skills with the ability to prioritize and self-initiate when necessary. Knowledge of tool design, gage design, and fixture design. Computer skills include demonstrated knowledge of Microsoft office. Working knowledge of plant/facilities engineering, electronics, pneumatics and engineering controls. Excellent interpersonal, communication, organizational skills, and collaborative team player. Broad-base knowledge of Lean Manufacturing, including 5s, Kaizen, Kanban, Poke-a-Yoke, Process Mapping & Value Stream Mapping, other tools & Techniques Strong analytical & problem-Solving Skills (Experience of proven techniques a plus ie. Shainin, DOE, 6 Sigma, 8D, 5 Why, etc.) Continuous Improvement mindset with ability to lead and influence others. Mechatronics experience and interests Python, Visual Basic (VBA), Ignition!, IIOT, I4.0 are a plus Experience with Controls Systems including: DirectLogic PLCs (DirectSoft programming software) knowledge is a plus FANUC, ABB, and UR Robotics is a plus Cognex vision systems is a plus Equipment development, tooling design, gage design, CAD (NX, AutoCAD) is a strong plus ISO 14001 and IATF 16949 experience is a strong plus. Knowledge of Automotive AIAG Core tools (FMEA, Control Plan, PPAP, MSA, SPC) is a strong plus. Additional Notes Able to lift up to 35 pounds. Ability and Willingness to travel internationally Able to work in staggered or 2nd shift when necessary Relocation assistance not provided Applicants must be authorized to work in the United States/unable to provide visa sponsorship currently

Full-time Description Full time 1st shift (6:00 a.m.-3:00 p.m.) LOCAL CANDIDATES ONLY - Relocation Not Available The Controls & Automation Engineer is responsible for designing, programming, and implementing robust automation and control systems that support manufacturing operations. This role ensures production processes run efficiently, safely, and at the highest quality, while driving continuous improvement through system upgrades, optimization, and integration of Industry 4.0 technologies. The engineer will serve as both a project lead and collaborative team member, working with engineers, project managers, vendors, and customers to deliver effective, reliable automation solutions. Design, program, and support automation and control systems, including PLCs, HMIs, robotics, motion control, and SCADA systems. Develop and review electrical control schematics, wiring diagrams, panel layouts, and Bills of Material in compliance with standards. Lead or support automation projects from concept through installation, commissioning, and validation. Collaborate cross-functionally (production, maintenance, quality, IT, and customer teams) to ensure seamless system integration and high levels of collaboration. Diagnose, troubleshoot, and resolve equipment malfunctions to minimize downtime and ensure manufacturing efficiency. Drive continuous improvement through automation enhancements, process optimization, lean practices, and data integration. Ensure compliance with safety standards, regulatory requirements, quality systems, and company policies. Maintain complete documentation for control systems, including CAD drawings, programs, and technical manuals. Train maintenance, operations, and customer personnel on automated equipment and systems. Stay current with emerging technologies in industrial automation and recommend upgrades where appropriate. Requirements Education: Bachelor's degree in Electrical Engineering (required). Experience: Minimum 5 years of experience in industrial automation, manufacturing controls, or related field (10+ years preferred). Technical Skills Strong knowledge of PLC programming (Allen-Bradley/Rockwell, Siemens, or similar). Experience with HMI/SCADA systems and industrial networks (Ethernet/IP, Profibus, Modbus, IO-Link, etc.). Proficiency in electrical design software (AutoCAD Electrical, SolidWorks Electrical, or equivalent). Hands-on experience with robotics, vision systems, sensors, drives, motion control, and pneumatic systems. Familiarity with SQL-based plant floor data gathering systems, MES, and Industry 4.0/Smart Manufacturing principles. Experience with plant-wide SCADA systems (Ignition, FactoryTalk, etc.) Experience with IT/OT networking and high-level languages (Visual Basic, C#, or similar). Core Competencies Strong problem-solving and analytical skills with ability to apply lean/continuous improvement principles. Ability to manage multiple projects simultaneously, serving as both a project lead and supporting engineer. Excellent written and verbal communication skills, with the ability to present to managers, customers, and vendors. Ability to work independently and in cross-functional teams. Ability to write reports, business correspondence and procedure manuals Ability to think critically. Proven track record of improving system reliability, efficiency, and integration through automation. Physical & Work Environment Requirements Ability to work in a manufacturing plant environment, including standing, walking, and occasional lifting. Occasional travel to vendors, customer sites, or other facilities may be required. Must follow all safety protocols and wear appropriate PPE when on the plant floor. Benefits We offer a competitive & market salary and a comprehensive benefits package including health insurance, dental, vision, life insurance, STD, LTD, 401(k), profit sharing. Riverdale Mills is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, genetics, disability, age, veteran status, or any other characteristic About Us Riverdale Mills Corporation is one of the largest manufacturers of galvanized and PVC coated welded wire mesh in the world. A privately held company based in Northbridge, MA. Riverdale Mills specializes in the design and manufacturing of commercial, industrial and consumer wire products, tools and accessories for the marine, aquaculture, security, and construction and farming industries. The company's exemplary quality and manufacturing expertise is known worldwide. Salary Description $78,000 - $90,000 depending upon experience

Basic Qualifications Requires a Bachelor's degree in Electrical Engineering, or a related Science, Engineering or Mathematics field. CLEARANCE REQUIREMENTS: Department of Defense Secret security clearance is obtainable within a reasonable amount of time after hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position Duties and Tasks: As a member of the Power and Analog Hardware group, you will be involved in all program phases, including: • Electrical requirements analysis, functional analysis, performance analysis (e.g. timing, power, etc.), design, integration and verification/qualification of electrical hardware, equipment and systems • Electromagnetic Interference (EMI) and Electromagnetic Compatibility (EMC) assessments of COTS or internally developed hardware; including requirement analysis, specification and testing of various designs (circuit cards, assemblies, etc.) • Internal electrical and EMI/EMC reviews of electrical components, hardware, equipment and systems. Work with multi-discipline design teams to ensure best practices for EMI/EMC design, build, test principles. • Evaluation of vendor capability to support product development • Supporting resolution of any EMI/EMC related issues in design, integration & test, qualification, manufacturing, and equipment lifecycle support phases. You will primarily support the Maritime & Strategic Systems business area developing and deploying Weapon System Control and Launch system hardware, with opportunities to work across multiple GDMS sites and programs. Knowledge, Skills and Abilities: • Clear understanding of electrical engineering concepts, principles, and theories with a focus on Power and EMI/EMC concepts and theories, including radiated emissions/susceptibility, conducted emissions/susceptibility, noise propagation and mitigation techniques. • Clear understanding of electrical engineering processes and engineering design tools (MATLAB / Simulink, LTspice) • Basic knowledge of power conversion (AC/DC, DC/DC, DC/AC & various topologies), power conditioning, filtering, distribution, protection, control & monitoring techniques • Grasps and applies new information quickly • Good ability to handle more complex assignments with experience • Shows initiative on assignments, and professionally executes projects with little direction • Good written and verbal communication skills • Good ability to recognize and clearly report information relevant to sound ASIC/FPGA design topics • Clear understanding of Microsoft Office application #LI-Hybrid Salary Note This estimate represents the typical salary range for this position based on experience and other factors (geographic location, etc.). Actual pay may vary. This job posting will remain open until the position is filled. Combined Salary Range USD $85,807.00 - USD $95,193.00 /Yr. Company Overview General Dynamics Mission Systems (GDMS) engineers a diverse portfolio of high technology solutions, products and services that enable customers to successfully execute missions across all domains of operation. With a global team of 12,000+ top professionals, we partner with the best in industry to expand the bounds of innovation in the defense and scientific arenas. Given the nature of our work and who we are, we value trust, honesty, alignment and transparency. We offer highly competitive benefits and pride ourselves in being a great place to work with a shared sense of purpose. You will also enjoy a flexible work environment where contributions are recognized and rewarded. If who we are and what we do resonates with you, we invite you to join our high-performance team! Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans

Job DescriptionAbout Us LiquidPiston is revolutionizing propulsion with our ultra-efficient, compact rotary X-Engine platform. Our engines deliver unmatched power density and fuel efficiency, making them ideal for next-generation aerospace applications including UAVs, eVTOL, hybrid-electric propulsion, and advanced defense systems. As we rapidly scale our aerospace-focused programs, we are building a world-class team to deliver flight-ready propulsion solutions. Role Overview The Electrical Engineer - UAV Avionics & Power Systems will own the design, development, and integration of all electrical and electronic systems for LiquidPiston-powered aerial platforms. This hands-on role combines power electronics, avionics integration, embedded controls, and aerospace-grade reliability engineering. You will work side-by-side with propulsion, airframe, and flight-control teams to deliver certifiable, high-performance electrical architectures that enable longer endurance, heavier payloads, and mission-critical reliability. Key Responsibilities Design and integrate engine control units (ECUs), power distribution, and avionics Interfaces for hybrid-electric and conventional UAV propulsion systems Design and develop the electronic control system architecture for of UAV propulsion and flight control systems Integrate and configure flight controllers and engine control units with onboard avionics, sensors, and communication modules Develop and implement embedded software/firmware for control, safety, and telemetry functions Apply systems engineering principles to ensure seamless integration of electronics, software, and mechanical components Support testing, debugging, and validation of integrated electromechanical UAV systems Collaborate with internal teams and external partners to meet system-level performance and reliability goals Document system design, software and hardware interfaces, and integration processes Qualifications Master's degree in Electrical Engineering, Computer Science/ Engineering, or a related field related field Must be a US person 5+ years of experience in aerospace electrical/electronics design (UAV, eVTOL, general aviation, or defense programs strongly preferred) Proven track record designing flight-critical or safety-critical electronics (redundancy, voting, dissimilar systems a plus) Expertise with electromechanical systems, sensors, communication protocols (CAN, UART, SPI, MAVLink, I2C), and PCB design Familiarity with model-based design tools (MATLAB/Simulink Embedded Coder) and HIL testing a strong plus Demonstrated ability to take electronics from concept through flight-test and into production or certification Self-starter who thrives in a fast-moving, resource-constrained environment typical of aerospace startups Benefits & Perks Flexible PTO: We value work-life balance and encourage time to rest and recharge. Health & Wellness: Comprehensive medical, dental, and vision coverage-you choose what works best for you. Equity Participation: Permanent employees receive RSUs (Restricted Stock Units). 401(k) Match: We offer a 401k w/100% matching up to 3% of your salary and then 50% of contributions between 3-5% Career Growth: Ongoing training, mentorship, and learning opportunities to accelerate your growth. Our Culture At LiquidPiston, we embrace challenges, move fast, and celebrate curiosity. Our team thrives on collaboration, creativity, and perseverance. We understand that innovation involves risk-and we're not afraid to fail as we move forward. Equal Opportunity Employer LiquidPiston, Inc. is proud to be an Equal Opportunity Employer. Qualified applicants will not be discriminated against, and receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity, national origin, or protected veteran status or disability. All offers of employment at LiquidPiston are contingent upon successful completion of a pre-employment background check and drug screening. Powered by JazzHR dn RfiibKDG

Job Description As a design build engineering firm and general contractor that designs and builds food and beverage processing facilities, Dennis Group's automation & controls engineers work closely with our process, packaging and building engineers to meet our clients' expectations in startup, commissioning, and qualifying their food and beverage production facilities. The role requires regular onsite presence to ensure necessary diagnoses, troubleshooting, and operational startup of our client's production lines, equipment, and facilities. Our automation & controls engineers are frequently facing engineering challenges in applying standard engineering techniques to design, develop, and maintain instrumentation or control systems. Both software and hardware design and troubleshooting skills and abilities is required for this role. Typical responsibilities include, but not limited to: Responsibilities Handles moderately complex issues and problems and refers more complex issues to higher-level engineer With general supervision, designs and troubleshoot both software and hardware necessary for control systems utilizing PLCs for integration of manufacturing systems. Automates manufacturing processes through the use of instrumentation or controls systems. Design, diagnose, and troubleshoot network infrastructures - Ethernet, DeviceNet, AS-i, Profibus etc. Develops new PLC applications, interfaces, or embedded controls Develops new or modifies existing set-up and commissioning of new facilities or upgrading of existing facilities Design, specify, wire, and procure control panel equipment, e.g. safety circuits, I/O, networks, etc. Design, specify, and procure electrical equipment, e.g. MCCs, panelboards, transformers, etc. Specify, procure, configure, and troubleshoot controls hardware and field instrumentation Assist with coordinating with other engineer disciplines Troubleshoots and resolves malfunctions and makes recommendations that will improve efficiency or quality of operations Develop bid documentation for Electrical, Automation, and Low Voltage (network, security) vendors Documents specifications and operating procedures Project primary client technical contact Interface and manage installation contractors during construction Researching Automation & Controls materials and best practices Supporting talent growth within our organization Provide coaching and/or mentoring to a subordinate group when directed by supervisor. Required Education Skills and Experience Degree in Electrical Engineering or a related field 4-7 years of experience with Allen Bradley/Rockwell, Siemens, GE Fanuc, Honeywell Systems. 4-7 years of experience in Visual Basic, SQL, MS ACCESS Database programming skills a plus 4-7 years of experience with Design and implement process network infrastructure (Ethernet, Device Net, Control Net, ProfiBus, etc.) 4-7 years of experience in an industrial manufacturing setting Database programming skills a plus Proficiency with MS Office and AutoCAD Required This role is client facing, those successful in this role are professional, self-motivated, and energetic individuals with excellent communication and inter-personal skills. Must meet travel requirement - you will spend significant time in our client's facilities during installation and startup/commissioning/qualification phases of a project - 35% to 50% of any given time of the year. Physical Requirements Prolonged periods sitting at a desk and working on a computer. Prolonged periods of standing and walking during installation, commissioning and startup. Must be able to lift-up to 30 pounds at times. Travel Requirement Up to 50% travel required to visit project site and other offices. About Us We plan, design, engineer, and build food plants for major brands across the country and the world. For the past three decades, we've focused exclusively on the food and beverage industry, helping your favorite brands put your favorite foods in the grocery store. Simply put, food isn't one thing we do, it's all we do. Dennis Group offers competitive compensation packages commensurate with experience. We provide comprehensive employee benefits including medical, dental, vision, life and disability insurance, paid time off including an open vacation policy, as well as bonus, profit-sharing, and retirement plans. Dennis Group is proud to provide equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or genetics.