Senior mechanical engineer jobs in Camden, NJ

SAIC has an opening for a Mechanical Engineer to provide direct onsite engineering and technical support to the PMA-251 Foreign Military Sales (FMS) program office, with a primary focus on the French aircraft carrier program. This role supports the design, integration, testing, and sustainment of Electromagnetic Aircraft Launch System (EMALS) and Advanced Arresting Gear (AAG) mechanical and hydraulic systems, as well as related shipboard interfaces, components, and support structures. The engineer will work closely with NAVAIR, OEM and French DGA (Direction Générale de l'Armement) stakeholders to ensure electrical design, testing, and configuration align with and customer requirements. This position is hybrid-remote in Lakehurst, NJ. Job Duties: Provide professional mechanical engineering support to the French carrier program, focusing on EMALS/AAG equipment design, integration, and lifecycle sustainment. Conduct feasibility analyses, structural and thermal evaluations, and system performance assessments for shipboard mechanical and hydraulic systems. Develop and review engineering drawings, design data, and interface control documents (ICDs) to ensure compliance with applicable naval standards and international requirements. Support installation planning, equipment layout optimization, and mounting interface design to integrate EMALS and AAG hardware into French carrier ship architecture. Participate in system-level testing, commissioning, and performance verification at test sites and ship integration facilities. Perform troubleshooting, root cause analysis, and corrective actions related to mechanical, hydraulic, or pneumatic system failures. Collaborate closely with electrical, systems, and logistics engineers to ensure integrated design solutions and compatibility across all subsystems. Prepare and maintain technical documentation, including design change requests, test plans, maintenance procedures, and configuration management records. Support and contribute to Systems Engineering Technical Review (SETR) activities, including design, integration, and readiness reviews. Provide technical updates, status briefings, and engineering inputs to PMA-251 leadership, FMS case managers, and international customer representatives. Ensure all designs and documentation adhere to DoD, NAVAIR, and French engineering standards and environmental, safety, and quality requirements. Qualifications Required Education and Experience: Bachelor's degree (BSME) in Mechanical Engineering and eight (8) or more years of relevant experience. Experience in the design, development, and integration of mechanical or hydraulic systems in a maritime, aerospace, or defense environment. Proficiency in CAD software (e.g., SolidWorks, CREO, AutoCAD) and mechanical modeling tools. Understanding of structural design principles, material selection, and mechanical stress analysis. Experience conducting failure analysis and implementing design improvements or corrective actions. Strong communication and collaboration skills, with the ability to work across technical disciplines and engage effectively with U.S. and international partners. Preferred Qualifications: Experience supporting shipboard mechanical systems, such as launch and recovery equipment, hydraulic actuators, or cooling and lubrication systems. Prior involvement in NAVAIR, NAVSEA, or FMS programs - particularly international maritime or carrier-based systems. Familiarity with EMALS, AAG, or related aircraft launch and recovery systems. Working knowledge of Systems Engineering Technical Review (SETR) processes and documentation standards. Experience with testing and commissioning complex mechanical systems, including performance validation and acceptance testing. Knowledge of ANSI, ASME, MIL-STD, and mechanical design standards. Security Clearance: Active or Interim DoD Secret Clearance required on the first day of employment. Travel: Occasional CONUS and OCONUS travel (up to 10%) may be required to support ship integration and international collaboration. Must possess or be eligible to obtain a U.S. Passport. Target salary range: $120,001 - $160,000. The estimate displayed represents the typical salary range for this position based on experience and other factors. Overview SAIC accepts applications on an ongoing basis and there is no deadline. SAIC is a premier Fortune 500 mission integrator focused on advancing the power of technology and innovation to serve and protect our world. Our robust portfolio of offerings across the defense, space, civilian and intelligence markets includes secure high-end solutions in mission IT, enterprise IT, engineering services and professional services. We integrate emerging technology, rapidly and securely, into mission critical operations that modernize and enable critical national imperatives. We are approximately 24,000 strong; driven by mission, united by purpose, and inspired by opportunities. SAIC is an Equal Opportunity Employer. Headquartered in Reston, Virginia, SAIC has annual revenues of approximately $7.5 billion. For more information, visit saic.com. For ongoing news, please visit our newsroom.

Mechanical Drafter / Designer - Refinery (Paulsboro, NJ) We are seeking a Mechanical Drafter/Designer to support ongoing refinery projects in Paulsboro, NJ. This role will be responsible for preparing detailed mechanical design drawings and 3D models for refinery equipment, piping systems, and structural supports, working closely with engineers and field personnel to ensure accuracy and constructability. Responsibilities: Develop and revise detailed 2D/3D mechanical and piping drawings using AutoCAD and/or Plant 3D. Create fabrication and layout drawings for pressure vessels, exchangers, tanks, piping systems, and supports. Interpret P&IDs, field sketches, and engineering specifications to produce accurate design deliverables. Support redlining, as-built updates, and field walkdowns to verify dimensions and installation details. Coordinate with mechanical, civil/structural, and process engineers to ensure design integration and compliance with refinery standards. Maintain drawing files, equipment lists, and revision control in accordance with QA/QC procedures. Qualifications: Associate degree or technical diploma in drafting, design, or related field. 1-3+ years of mechanical or piping drafting/design experience in refinery, petrochemical, manufacturing, or heavy industrial environments. Proficiency in AutoCAD, Plant 3D, or MicroStation; familiarity with laser scanning or 3D modeling tools a plus. Strong understanding of ASME, API, and refinery design standards. Ability to perform field verification and site visits as needed.

Precis Engineering + Architecture (Precis) (************************** offers comprehensive design services to our clients in the pharmaceutical, biotechnology, higher education, industrial, commercial, critical utility, and healthcare markets. Together, we design and create important buildings, facilities, and environments that improve and save lives. Precis is recognized for our design expertise and proficiency in providing strategically sensitive and technically complex engineering and architectural services. The Mechanical Department is regularly engaged in Lynn broad spectrum of projects that require creative solutions to challenging building systems and utility issues. This offers an excellent environment for employees to rapidly expand their knowledge and understanding of the key role engineering plays in the success of building renovations and new construction projects. Precis is currently seeking Lynn Senior Mechanical Engineer for our Ambler, PA office. This individual must have Lynn background in Mechanical/HVAC Engineering and Lynn basic understanding of engineering practice within highly regulated industries. We are looking for Lynn resourceful and goal-oriented individual who desires challenging work in Lynn dynamic environment. Responsibilities: Provide mechanical engineering services to design and oversee the design of complete mechanical/HVAC systems supporting facility expansions, renovations, remediation, and new construction projects from concept through detailed design and construction, including equipment, ductwork, piping, building automation, and related building components. Receive supervision and guidance relating to overall objectives, critical issues, new concepts, and policy matters. Receive direction on unusual conditions and developments. Independently apply extensive and diversified knowledge and use advanced techniques in the modification or extension of standard procedures and design criteria to complete assignments, including the development of details, control sequences, and specifications. Assist upper-level management to develop new techniques and improve standards and processes. Supervise all staff necessary to complete project assignments in alignment the defined scopes, schedules, and budgets. Provide thorough review of project documents for conformity with project assignments and quality assurance. Interact with client representatives, equipment vendors, contractors, project managers, and other project team members to coordinate deliverables and breadth of the mechanical design. Periodically visit project sites to survey existing conditions and observe construction activities. Requirements: Bachelor of Science degree in Mechanical or Architectural Engineering Minimum 8 years industry engineering experience Strong computer literacy with advanced knowledge and use of Excel, Word, Outlook, and Teams Advanced written & verbal communication skills Advanced knowledge of applicable codes and industry standards and guidelines Experience with critical environments and related building systems Professional Engineer license

Project Engineer - Life Science & Cleanroom Construction 📍 Philadelphia, PA Metric is proud to be representing one of the largest cleanroom and life science construction firms in the United States, supporting the search for a driven Project Engineer to join their expanding team at their Philadelphia headquarters. Our client is a nationally recognized leader in pharmaceutical, biotech, and advanced manufacturing construction, known for delivering technically complex, highly controlled environments. They're growing rapidly and investing heavily in developing their next generation of project leaders. About the Role As a Project Engineer, you'll play a key role supporting major cleanroom and life science builds across the U.S. You'll work closely with Project Managers and Superintendents to ensure seamless project execution - from design coordination and procurement to quality control and documentation. This is a fantastic opportunity for someone early in their career (1-3 years of experience) who's eager to grow within a best-in-class construction organization known for innovation, precision, and career progression. Key Responsibilities Support the planning and execution of cleanroom, lab, and life science construction projects. Assist in submittals, RFIs, change orders, and procurement tracking. Coordinate with design teams, subcontractors, and field staff to maintain project schedules. Perform site visits and ensure documentation meets GMP and cleanroom standards. Utilize tools such as Procore, Bluebeam, and MS Project to manage daily project documentation. Participate in quality, safety, and commissioning activities as needed. Qualifications 1-3 years of experience as a Project Engineer or Assistant PM in commercial, industrial, or life science construction. Bachelor's degree in Construction Management, Engineering, or related field. Strong organizational, communication, and problem-solving skills. Exposure to GMP, pharmaceutical, or cleanroom construction is a plus, but not required. Proficiency in Procore, Bluebeam, or similar construction management platforms preferred. Why Apply Join a nationally recognized leader in cleanroom and life science construction. Gain hands-on experience on cutting-edge pharmaceutical and biotech projects. Work directly with some of the most experienced leaders in controlled-environment construction. Competitive base salary, benefits, and clear long-term growth opportunities. If you're a motivated Project Engineer looking to grow your career with a market leader at the forefront of innovation in life science construction - we'd love to hear from you.

is open for mid-senior to senior level Join Us at a Pivotal Moment of Growth [Doosan Robotics X ONExia] is experiencing an exciting transformation. As a leader in robotic solutions with standard products for palletizing and packaging applications using Robot Arms, we're experiencing rapid expansion and scaling our impact across industries. Our cutting-edge systems-from advanced palletizing and case packing to carton erecting and conveyor solutions-are transforming operations for companies across North America, and we need passionate engineers to fuel our next phase of growth. The Opportunity As one of our Mechanical Engineers, you'll be the creative force behind breakthrough automation solutions. You'll take customer concepts and transform them into sophisticated automated machines that solve real-world industrial challenges. This role combines engineering expertise with inventive problem-solving, offering the perfect opportunity for engineers who love bringing innovative ideas to life. What Your Days Will Look Like: Design Work: Spend most of your time doing what you love-creating innovative machine designs using SolidWorks Hands-On Work: Get your hands dirty building prototypes, testing concepts, and working directly with the machines you design Project Management: Guide projects from concept through completion, ensuring your designs meet customer goals and timelines Collaboration: Present your designs to customers and teammates, sharing ideas and refining solutions together Job Requirements B.S. in Mechanical Engineering with 5+ years of hands-on machine design experience Understanding of industrial components inside and out-bearings, motors, sensors, gearboxes, and how they work together Knowledge of materials, coatings, and machining processes for fabricated parts Ability to develop comprehensive machine layouts and specify the right components for each application Strong capability to create fabrication and assembly drawings. Solidworks experience Experience with robots Strong attention to detail Good communication skills to present design to customers and co-workers Strong capability to create fabrication and assembly drawings. Ready to Be Part of Something Growing? We're building something special at "Doosan Robotics X ONExia", and we'd love for you to help us do it. If you're ready to combine technical expertise with meaningful customer relationships while growing your career alongside our expanding company, let's talk. Additional Details: Location: Exton, Pennsylvania (750 Springdale Dr, Exton, PA 19341) Schedule: Monday-Friday, 8-hour shifts Travel: 5-10% (occasional customer sites) Benefits - 401(k) - 401(k) matching - insurance (Health, Life, Vision, Dental) - Flexible schedule - Paid time off [Doosan Robotics X ONExia] welcomes applications from all qualified candidates and is committed to creating an inclusive workplace where everyone can contribute their best work. [Doosan Robotics X ONExia] is an equal opportunity employer committed to creating an inclusive workplace where diverse perspectives drive innovation.

Headquartered in Bensalem PA and founded in 1999, EDA Contractors holds an extensive portfolio of experience related to the exterior envelope of commercial, institutional, and industrial buildings. EDA achieves excellence by integrating design knowledge, continuous training, and accountability into every facet of the company. EDA provides a wide range of comprehensive services: Air & Vapor Barriers, Green Roof Systems, Masonry, Repair & Maintenance, Roofing & Sheetmetal, Siding & Wall Panels, Slate & Copper Roofing, Louvers, Glass & Glazing and Waterproofing. EDA is a growth and customer-oriented organization. We are proud to foster a workplace culture that has been recognized with several Top Workplace awards. Job Summary EDA is seeking a competent Technical-Focused Project Manager (known Internally as an EDA Project Engineer) who specializes in either Low Slope Roofing or Exterior Facade scopes. The Project Engineer will interface with internal project teams to assist with their particular needs by serving as the dedicated team member tasked with researching and providing all required technical support to our PM teams by gaining profound knowledge of our projects, assisting with product selection, creating submittals, overseeing 3rd party shop drawings and engineering calculations, along with providing material take-offs and material order lists with professional oversight and solutions to challenges with design and field conditions. A Project Engineer will work with various departments from project management to shop fabrication and field operations, in order to ensure balance across various aspects of the project from constructability, sequencing and coordination to fabrication and install. Additionally, a Project Engineer will strive to improve by continuing to learn and research advanced technology regarding best practices in the field leading to cost-effective solutions. A Project Engineer is generally located within the company and works alongside other professionals to meet customer's needs. They usually begin as Project Managers or Assistant Project Managers, and as they advance on their career path within the company will become transitioned to the role of Project Engineer through training and/or previous experience and technical knowledge of our scopes of work. Individuals with a firm holistic understanding of both the operational and scope aspects of projects tend to excel in this position. You'll be a member of our brilliant engineering team, contributing to the design and construction of new cutting-edge architecture. To be successful in this position, you should have hands-on experience with project management, advanced technical knowledge of building envelopes, strong attention to detail and an in-depth understanding of construction details, sequencing and coordination. It's also important that you have rock-solid self-management and communication skills to meet the daily demands of this role. Job Responsibilities Obtain expert knowledge of a project by researching and studying contract documents Develop and manage relationships with manufacturers and vendors Research products for performance requirements and code compliance Assist with product selection by procuring pricing and product data for all potential products Create all submittal packages required for our scopes of work Facilitate all shop drawings and engineering calculations Assist in reviewing and analyzing shop drawing details for constructability and best practices Provide value engineering alternatives and innovative solutions to enhance project needs Perform material take-offs and provide material order lists Oversee and facilitate off-site mockups and testing Provide technical support and problem solving for field conditions Serve as the technical expert in project meetings with our customers Collaborate with shop, CAD operators, other engineers and field staff Attend conferences and lunch and learns to continue education Knowledge, Skills, and Abilities: Capable of critical thinking, risk assessment, problem solving & predictability Skilled in conflict resolution and negotiation Fluent in communicating ideas & concepts including visual diagrams Apply discernment and exercise proper ethical principles in all decisions Capable to attend meetings and effectively communicate with project team and customers Great computational and spatial ability Excellent oral and written communication Attention to detail Develop and maintain positive working relationships with internal and external customers and vendors Project development and leadership skills are essential Ability to work with various departments to facilitate the orderly execution of a proposed project plan Understanding of safety standards and environmental impact of a design Proficient in Microsoft Excel, OnScreen Take-Off, Bluebeam Requirements: Bachelor's degree in related engineering field preferred Previous experience as a Project Manager or a similar role Knowledge and Experience working with Low Slope Roofing and/or Exterior Facades EDA Contractors is an equal opportunity, affirmative action employer dedicated to diversity and the strength it brings to the workplace. All qualified applicants will receive consideration for employment regardless of race, color, age, religion, sex, national origin, protected veteran status, sexual orientation, gender identity, genetic information, disability status, or any other protected characteristic.

ARM Group LLC is seeking a self-driven Project Engineer who is looking to grow and embodies an ownership mentality. The primary function of this position is to assist with the planning, design, permitting and construction oversite of multi-disciplined projects to include active non-coal mining and quarry related projects, restoration of abandoned mine lands, post construction stormwater management, and erosion and sediment control planning. The successful candidate will possess an “ownership mentality” and be a highly motivated, resourceful, well-organized, and collaborative engineer that is able to meet project goals, schedules, and budgets. The position will require a working knowledge of civil and environmental engineering best-practices with a focus on identifying, communicating, and solving engineering and permitting challenges that may impact a project's overall feasibility, cost, or constructability. In addition to early-stage due diligence and engineering coordination, the position will also require project management responsibilities including: local on-site support interfacing with regulators and other officials to support permit approvals; communicating with clients on technical issues or concerns; performing engineering calculations; preparing detailed designs, construction administration, budget management, and QA/QC of projects in construction. Primary Responsibilities Prepare, review, and update design drawings and investigation reports. Coordinate the development, design and permitting of multiple projects simultaneously. Assess and mitigate project risks. Perform and/or check technical calculations. Use the principles of engineering to develop solutions to permitting, design, and construction challenges. Provide technical support for projects. Research regulations, codes, zoning ordinances, and other requirements as needed to ensure project compliance. Prepare reports, letters, emails, permit applications, etc. for projects. Observe, monitor, and document fieldwork while analyzing problems and possible solutions. Collaborate with other team members to meet deliverables on projects and obtain further knowledge and experiences. Effectively communicate with key stake holders including clients, project managers, CAD designers, and other technical members of the project team. Proactively recognize conditions and problems of non-routine nature, develop solutions, and seek guidance when needed. Requirements Bachelor's degree in Civil or Environmental Engineering, or related engineering discipline. E.I.T. Certificate required. 3+ years of engineering experience including Post Construction Stormwater Management design, Erosion and Sediment (E&S) design and PADEP permitting. Competence with AutoCAD Civil 3D, Office 365 (Word, Excel, Powerpoint) Knowledge of PADEP regulations, including Noncoal Mining, Erosion & Sediment Control, and Dams/Waterway Management. Solid oral, written communication, and public speaking skills. Should be articulate, assertive, and confident. Strong technical writing skills, with demonstrated ability to prepare clear, concise, and defensible reports, permit applications, and regulatory correspondence. High performance with organizational skills with proven ability to manage multiple, complex tasks. Creative thinker with effective teamwork skills. Detail-oriented and analytical, with proven ability to QA/QC deliverables. Must be able to work independently and collaborate with peers when appropriate. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the public. Self-motivated and ambitious, with a strong ownership mentality and desire for professional growth. Preferred Requirements Experience with PADEP and U.S. Army Corps of Engineers permitting Your Wellness, Our Priority: A Look at Our Benefits We invest in our team's well-being and future through a comprehensive benefits package with a range of offerings designed to support you holistically. Our health and wellness offerings include two Health Insurance options (Traditional PPO and QHDHP with an HSA), vision and dental coverage, life insurance, disability protection, accident and critical illness coverage. To enhance your future financial security, we provide a 401(k) with company match, HSA/FSA accounts, and 529 college savings plans. Work-life balance is prioritized through our generous PTO starting at 15 days per year and 10 paid holidays per year, giving you ample time to rest, recharge, and attend to life outside the office. An Employee Assistance Program is provided to you and your household with resources to assist you in managing a variety of situations. We invest in your professional growth through our Tuition Reimbursement program and continuing education opportunities. After 6 months of employment, all team members become eligible for quarterly bonuses, providing additional avenues for financial growth. This robust package is designed to foster a workplace where you can thrive both personally and professionally, underscoring our dedication to your overall well-being and future success.

The Mechanical Engineer is responsible for defining and supporting the technical aspects of operations at the Naval Foundry and Propeller Center (NFPC). NFPC is a low volume, large size, sand-cast foundry that primarily pours non-ferrous alloys from induction furnaces. NFPC completes all machining operations in house and ships completed products to our internal Navy customers. Responsibilities include but are not limited to: Creates, revises/modifies Siemens NX programs for CNC machining of propulsor components. Provide Technical guidance for production operations (process flow, conveying drawing requirements into production process) by performing both independent assessments as well as team-oriented projects. This can include development of engineering reports, plans, drawings, specifications and procedures for the manufacture/repair of ship's propellers. Serve as Project engineer and as such be responsible for working with other engineering disciplines for all engineering aspects of an assigned project. Acts as troubleshooter in identification and resolution of problems encountered during production or pre-production activities. Shall comply with all NFPC procedures for safety, fall protection and hazardous materials. Shall assist in developing and implementing engineering process controls/techniques for continuous improvement of machining and assembly operations. Shall perform other tasks as required. Qualifications Required for the Position Bachelor of Science Degree in Engineering. Area of expertise should reside in Manufacturing, Mechanical or equivalent.

This position supports NSWCPD Code 431 Aircraft, Vehicle, Ship & Material Handling and Stowage, and Code 433 Launch, Recovery & Hydraulic Systems branches. The branches are responsible for in-service engineering for crane, davit, submarine hydraulic, surface ship steering, hydraulic systems as well as aircraft elevators, powered closures and doors, vertical package conveyors, anchors, mooring, towing, well deck, vehicle ramps, and stowage systems. The support is focused on launch, recovery and hydraulic systems as well as aircraft, vehicle, ship and material handling systems. Engineering tasks are concentrated in the areas of Ship Change Document (SCD), Maintenance and Testing, Research, Design, Testing, and Evaluation (RDT&E), Integrated Logistics support (ILS), and Installation support. Required Skills and/or Experience: Ten (10) years of professional experience supporting Naval HM&E systems Degree Requirements: Master's level degree in Mechanical Engineering. Must be a US Citizen A secret security clearance All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. ORBIS offers an excellent benefits package and a competitive salary in a professional atmosphere.

Professional Summary (Enhanced with Automation) Results-driven Manufacturing Engineer with strong expertise in manufacturing automation, continuous improvement, and new product introduction. Proven success in designing and implementing automated manufacturing processes and equipment that improve throughput, reduce waste, and enhance product quality. Skilled at leading cross-functional engineering teams, troubleshooting production issues, and driving lean manufacturing initiatives. Experienced in PLC-controlled equipment, robotics integration, and automated test systems while maintaining strict safety and quality standards. Essential Duties and Responsibilities (with Automation Additions) Essential Duties and Responsibilities include the following. Other duties may be assigned. Facilitate technical team meetings and project work, e.g., DFA, PFMEA, A3PS, data analysis, Design of Experiments, root cause analysis, Pugh analyses Coach and mentor new and existing engineers on processes, tools and skills required to further their personal development Work with Value Stream team to identify and apply continuous improvement methods to enhance manufacturing quality, reliability, or cost-effectiveness Design, plan, specify, procure, certify, and implement into production safe, high-quality, automated and semi-automated equipment and processes Develop and optimize automation strategies, including robotics, PLC programming, motion control, and machine vision to improve manufacturing efficiency and consistency Partners with Lean/CI team to develop manufacturing processes and standard work that improve output, reduce defects, improve product quality and reliability Benchmarks best manufacturing practices, automation technologies, and assembly techniques; introduces and implements enhanced automated processes that reduce cycle time and labor costs Functional ownership of item routings, work instructions, and process flow documentation, including automation process specifications and control plans Supports new product development, driving Design for Manufacturing/Assembly and Design for Automation objectives Support production equipment and processes as required to ensure optimal performance, including automation troubleshooting, PLC logic adjustments, and system upgrades Operations lead on New Product Introductions and Design Changes (ECN/ECR and OSK), including automation-ready process development Create efficient production processes to build and ship custom configured products within market lead time through automated workflow integration Review drawings, blueprints, sketches, manuals, or sample parts to determine appropriate manufacturing process; create drawings in SolidWorks or similar and integrate automation tooling Apply Lean Manufacturing practices, including line balancing, Kanban, 5S, SMED, and automation-driven waste reduction Create/Update information for creation of BOMs/Routings in ERP, including automation components and maintenance schedules Support Quality team on investigation and corrective action for product quality issues using automated testing and data collection systems Ability to work in a cross-functional team environment and drive results Ability to support other job functions (logistics, warehouse, technical sales, instrumentation) within a small team structure Ensure compliance with industry safety regulations and proactively implement automation safety systems (e-stops, light curtains, lockout/tagout) Collaborate with suppliers and system integrators to evaluate and implement automation equipment and digital manufacturing technologies Skills Manufacturing Automation: PLC programming, robotics integration, machine vision systems, automated test stations, motion control Continuous Improvement: Lean manufacturing, Kaizen, 5S, Kanban, SMED, Value Stream Mapping (VSM), waste reduction Process Engineering: Assembly line design, process validation (IQ/OQ/PQ), Six Sigma methodologies, PFMEA, control plans Mechanical Design: Tooling and fixture design, GD&T, design for manufacturability/assembly (DFMA), SolidWorks Electrical/Controls: Ladder logic, HMI programming, servo systems, sensors & actuators, wiring schematics Project Leadership: Cross-functional collaboration, project planning, risk mitigation, supplier management, ERP/MRP systems Problem Solving: Root cause analysis (RCA), Design of Experiments (DOE), A3, 8D, statistical analysis Safety & Compliance: OSHA, CE/UL machine safety, lockout/tagout (LOTO), risk assessments Tools & Technologies Automation & Controls: Allen-Bradley/Rockwell PLCs, Siemens PLCs, Omron, Mitsubishi, Schneider Electric Robotics: ABB, FANUC, Yaskawa Motoman, UR (Universal Robots), Kawasaki Vision & Sensors: Cognex, Keyence, Sick, Banner, Panasonic vision systems Motion Control: Allen-Bradley Kinetix, Bosch Rexroth, Festo, Parker Hannifin Manufacturing Software: AutoCAD, SolidWorks, Mastercam, ANSYS Data & Quality Tools: Minitab, JMP, SPC, MES systems Test & Measurement: NI LabVIEW, Fluke, National Instruments DAQ ERP Systems: SAP, Oracle, Infor, Epicor, Microsoft Dynamics

Under supervision this person will inspect, repair, maintain, and calibrate basic diagnostic imaging equipment, devices, systems, and instruments. Interact on a routine basis with other clinical health providers in the identification of technology-based problems. Participate in on-the-job training programs regarding technical, administrative, and customer service requirements. The ISE II for this role will possess: -Experience in a hospital or healthcare setting -Have 5+ years of imaging experience -Ability to make decisions regarding troubleshooting and repairing medical imaging devices -Excellent communication, customer service and time management skills -Cathlab, CArms, and Ultrasound service experience (Strongly Preferred)

🚀 Now Hiring: Project Engineer - Capital Projects (Fieldsboro, NJ) ✨ What You'll Do In this role, you will be responsible for managing full lifecycle project execution, including: 📌 Leading and managing multiple capital projects simultaneously 🗂 Developing detailed project plans, schedules, and budgets 🤝 Coordinating with internal teams, external vendors, and stakeholders to ensure alignment 🔍 Monitoring project progress and proactively resolving issues 🛡 Ensuring strict compliance with safety, regulatory, and quality standards 📊 Preparing and presenting project updates and reports to senior leadership 🔧 What You Bring Ideal candidates will have: 🎓 A Bachelor's degree in Engineering or related field 5+ years of project management experience, ideally in manufacturing Strong leadership, communication, and organizational skills Ability to manage multiple complex projects with competing priorities Experience executing capital projects in an industrial or manufacturing environment 🎯 Why This Role Stands Out Lead high-impact, high-visibility capital projects Work in a dynamic, innovation-focused environment Opportunity to influence the success of major plant initiatives Join a team that values collaboration, problem-solving, and continuous improvement 📩 Ready to Apply? If you're a detail-oriented Project Engineer who thrives in a hands-on project environment, we'd love to connect. Apply today or message me directly for more information!

RELOCATION ASSISTANCE: Relocation assistance may be available CLEARANCE TYPE: SecretTRAVEL: Yes, 10% of the TimeDescriptionAt Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work - and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history. Northrop Grumman Mission Systems is a trusted provider of mission-enabling solutions for global security. Our Engineering and Sciences (E&S) organization pushes the boundaries of innovation, redefines engineering capabilities, and drives advances in various sciences. Our team is chartered with providing the skills, innovative technologies to develop, design, produce and sustain optimized product lines across the sector while providing a decisive advantage to the warfighter. Come be a part of our mission! Northrop Grumman Mission Systems - Marine Systems is seeking a Mechanical Design Engineer Level 4 to join our team of qualified, diverse individuals. The Design Engineer researches, plans, designs and develops mechanical products and systems such as mechanical, thermal hydraulic or heat transfer systems for production, transmission, measurement, and use of energy. Applies research to the planning, design, development, and testing of mechanical and/or electromechanical systems, instruments, controls, engines, and/or machines. This position focuses on mechanical design and general engineering, including surface ship and submarine propulsion and power generation systems involving steam turbines, gearboxes and generator sets. Activities include developing new designs from concept, thru detailed design, manufacture and test phases. Job requirements also include supporting manufacturing activities on existing production contracts. This position is located in the Philadelphia, but will require relocating to Annapolis Maryland in 2029. Travel will be required to support supplier and customer meetings. What You'll get to Do: As a Mechanical Engineering team member you will drive and contribute to design and development of critical components and systems for naval propulsion and power generation applications involving turbines, electric motors, gearboxes and generator sets. He/she will be developing new designs from concept through detailed design, manufacture and test phases. Job responsibilities also include supporting manufacturing activities on existing production contracts. Travel may be required to support supplier and customer meetings. Basic Qualifications: Bachelor of Science degree in a STEM (Science, Technology, Engineering, Mathematics) discipline with 8 years of relevant experience; Masters of Science degree in a STEM discipline with 6 years of relevant experience Knowledge in mechanical engineering principles, and experience in developing design concepts, performing trade studies, and conducting supporting evaluations and analyses CAD experience, such as CREO or NX A basic knowledge of ANSI Y14.5 drawing standards and geometric dimensioning and tolerancing (GD&T) US Citizenship required Ability to obtain and maintain a DoD Secret Clearance Ability to work as a contributing engineering team member Preferred Qualifications: Knowledge in GD&T and solid modeling NX/CREO Current active DoD Secret clearance Primary Level Salary Range: $124,900.00 - $187,300.00The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions.Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. Employees in Vice President or Director positions may be eligible for Long Term Incentives. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business.The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates.Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO and pay transparency statement, please visit *********************************** U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.

Join ENERCON as a Part-Time Principal Mechanical Engineer. We are seeking accomplished Mechanical Engineers at the Principal level to bring their expertise to high-impact projects. This flexible, part-time role (averaging 30 hours or less per week) allows seasoned professionals to continue shaping innovative solutions while maintaining work-life balance. If you are looking to share your years of knowledge, we encourage you to explore our exciting opportunity and become part of our innovative and impactful team. What divisions could you work for? Nuclear Services Group (NSG) ENERCON Federal Services (EFS) Responsibilities A typical day may include being part of a multi-discipline engineering team for major projects such as cooling water systems (pumps, motors, control systems, piping, heat exchangers) for existing or new power plants. Other days you may be leading simple design projects such as valve replacements or writing engineering reports (such as corrosion studies or pros and cons of different equipment). You will also: Deliver High-Quality Engineering Documents: Prepare accurate and error-free drawings, sketches, calculations, and analyses that meet industry codes, standards, and regulations, ensuring client needs are met with precision Adhere to Standards: Develop engineering documents in alignment with client, ENERCON, and regulatory requirements while following established procedures, processes, and project directives Stay Ahead of the Curve: Keep your knowledge sharp and current with industry codes, standards, safety culture principles, and advanced design techniques tailored to the nuclear sector Commit to Excellence: Produce engineering deliverables that meet stringent quality assurance standards, aligning with project scopes and exceeding client expectations Build Lasting Client Relationships: Establish trust and rapport with clients through clear communication, professional interactions, and the delivery of exceptional engineering solutions Collaborate Across Disciplines: Work closely with other teams to ensure designs are comprehensive, integrated, and consider the needs of all disciplines involved #LI-AS1 Get Hands-On in the Field: Travel to plant sites to connect with client personnel, conduct on-site walkdowns, and evaluate plant structures, systems, and components firsthand to inform project work #LI-MB1 Qualifications Bachelor's Degree in Mechanical Engineering from an accredited university or equivalent 10 years of prior experience in nuclear or power generation design of mechanical systems Experience in one of the following industries required: engineering/design services, power generation, nuclear power, heavy industrial including chemical or pulp & paper, and government (DOE) projects Nuclear Engineering Change qualifications from any site that can be transferred are preferred 10CFR50.59 Screen and / or Evaluation qualifications that can be transferred are preferred Thermal-hydraulic and design modification experienced desired Demonstrated proficiency in preparation of mechanical calculations Proficient in Word and Excel Good writing, presentation and communication skills Ability to be an individual contributor and work effectively in teams Candidates who have mentorship experience or a desire to mentor early to mid career engineers preferred Must be able to get badged at a nuclear facility Must be able to perform plant walkdowns Pay Range USD $90,000.00 - USD $177,450.00 /Yr. Additional Information About ENERCON: At Enercon Services, Inc. (ENERCON), we're driven by our people-and we're proud to offer rewarding careers in a culture of excellence. We provide a comprehensive benefits package and professional development opportunities that support your long-term growth. What We Offer: Enjoy full benefits for you and your dependents starting day one, no waiting period Flexible work arrangements, including hybrid and alternative schedules 401(k) with employer matching Tuition reimbursement Professional Engineer (PE) license support and incentives Want to see the full picture? Click HERE to see our Comprehensive Benefits Salary Range Information: If a salary range is listed, it reflects the typical range for this full-time position based on the role, level, and location. Individual compensation within the range will be determined by factors such as work location, relevant experience, job-related skills, and education or training. Eligibility to Work: Candidates must be legally eligible to work in the US without requiring current or future sponsorship. Ability to pass a pre-employment and random drug and alcohol screenings, ENERCON and client specific background checks, and annual motor vehicle record (MVR) according to company and client policies. Equal Opportunity Employer: ENERCON does not discriminate in employment opportunities or practices based on race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other characteristic protected by law. Connect with Us: *************** | LinkedIn

Primary Duties & Responsibilities New Product Development - 70% * Mechanical design prime for optical communication module, line cards and/or chassis * Perform fast turn mechanical and thermal feasibility analysis for customer RFQs. * Perform mechanical and thermal analysis required to verify design performance and reliability against specifications * Produce 3D and 2D drawings for assemblies and components, DXF for PCB, * Perform DFMEA with engineering team DFM with internal and external vendors * Prioritize and manage schedule when working on multiple designs in parallel. Continuous Improvement- 20% * Design for lower cost and higher performance * Improve guidelines and best practices for mechanical design * Interact with larger Coherent team to foster new technologies and design approaches Manufacturing Support - 10% * Provide technical support for manufacturing personnel. * Processes troubleshooting and yield improvement. Education & Experience * Bachelor degree or above in Mechanical design, Manufacturing and Automation or other relevant fields * 5+ years of experience in mechanical design/simulation/test engineering, experience in telecommunication industry is preferred. * Experience with Solid works software * Experience with fiber optics products and assembly procedures * Experience with Office applications. Skills & Other Requirements * In-depth technical knowledge and understanding the basic guide of mechanical design and tolerance analysis, sheet metal design, CNC part design, plastic design, die-casting design etc. * The knowledge of heatsinking and thermal design in fan cooled systems: thermal pads, thermal shim, thermal grease, heatsink design and attachment. * Excellent skills with Solid works, Mechanical DVT and test methods * Strong ability to solve complex problems and arrive at sound technical decisions in short timeframes * Knowledge of Telecom and Data Center environmental and mechanical requirements * English both written and oral. Chinese may be a benefit. Working Conditions * May require occasional off-site meetings or travel * Regular use of a computer and other office equipment is necessary * Interaction with team members and external contacts is a regular part of the job * May require occasional overtime and flexibility in work hours to accommodate the executive's needs * . Physical Requirements * Sitting for extended periods while working on a computer or conducting meetings. * Use of hands and fingers for typing, writing, and handling documents. * Occasional lifting of objects or materials up to 20 pounds for administrative tasks. * Ability to communicate verbally and in writing. * Mobility within the office environment to attend meetings Safety Requirements All employees are required to follow the site EHS procedures and Coherent Corp. Corporate EHS standards. Quality and Environmental Responsibilities Depending on location, this position may be responsible for the execution and maintenance of the ISO 9000, 9001, 14001 and/or other applicable standards that may apply to the relevant roles and responsibilities within the Quality Management System and Environmental Management System. Culture Commitment Ensure adherence to company's values (ICARE) in all aspects of your position at Coherent Corp.: Integrity - Create an Environment of Trust Collaboration - Innovate Through the Sharing of Ideas Accountability - Own the Process and the Outcome Respect - Recognize the Value in Everyone Enthusiasm - Find a Sense of Purpose in Work Coherent Corp. is an equal opportunity/affirmative action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law. If you need assistance or an accommodation due to a disability, you may contact us at ******************************.

in mechanical design and electrical fundamentals, preferably within the aviation or aerospace sector. You will work on complex assemblies that integrate mechanical structures, electrical components, and advanced lighting technologies for high-performance environments. Responsibilities * Design and develop electro-mechanical components and assemblies for aerospace display systems. * Perform mechanical analysis including material properties, thermal transfer, and structural integrity. * Apply electrical fundamentals to ensure proper integration of components such as wiring, connectors, and lighting systems. * Utilize SolidWorks for CAD modeling and detailed design documentation. * Collaborate with project engineers and cross-functional teams to meet performance, quality, and compliance standards. * Support testing, troubleshooting, and validation of designs. * Contribute to continuous improvement initiatives and product innovation. Essential Skills * 8+ years of engineering experience in electro-mechanical design. * Strong mechanical engineering foundation including materials, thermal analysis, and structural assessments. * Working knowledge of electrical principles and components. * Proficiency in CAD software, with SolidWorks preferred. * Experience in aerospace or defense manufacturing strongly preferred. * Ability to manage multiple priorities and adapt to a dynamic environment. * U.S. citizenship required. Additional Skills & Qualifications * Experience with illuminated panels, cockpit displays, or similar aerospace systems. * Familiarity with AS9100 quality standards. * Strong problem-solving skills and ability to handle multiple tasks. Work Environment This position requires 100% onsite work at our facility in Horsham, PA. The role involves working with advanced technologies and equipment in a high-performance environment. Job Type & Location This is a Permanent position based out of Horsham, PA. Pay and Benefits The pay range for this position is $120000.00 - $135000.00/yr. Implementing a Profit-sharing plan for the team after being acquired by Transdigm Workplace Type This is a fully onsite position in Horsham,PA. Application Deadline This position is anticipated to close on Dec 4, 2025. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

Work Mode: Onsite Opportunity Step into the world of Kallista and help shape the next generation of luxury products where precision meets creativity. As part of our New Product Development group, you'll get hands-on experience bringing real products to life, from early design sketches to prototype testing and final validation. You won't just watch from the sidelines. You'll model, build, test, and problem-solve alongside engineers who turn bold ideas into high-performance designs. Every day offers a new challenge whether it's refining a complex mechanism, improving manufacturing efficiency, or testing materials that redefine what "luxury" feels like. At Kallista, we believe great engineering is equal parts curiosity, collaboration, and craftsmanship. If you love working on products people interact with every day, enjoy digging into technical details, and thrive in a fast-moving, design-driven environment, this is your opportunity to build something extraordinary and have fun doing it. How You'll Contribute Showcase Your Engineering Curiosity: Apply engineering fundamentals and structured problem-solving to bring new product ideas to life. Support the development and validation of components, subsystems, and full assemblies that define innovation in luxury design. Participate in technical feasibility studies and learn how data-driven decisions shape product excellence. Collaborate Across Disciplines: Work side-by-side with experts in Engineering, Marketing, Quality, Manufacturing, and Industrial Design. Be part of the conversations that shape tough decisions, explore trade-offs, and find creative paths forward. Help transform concepts into manufacturable products that meet the highest standards of performance and design. Engage with a Global Team: Collaborate with engineers across Kohler's worldwide Technical Centers and Centers of Excellence to share insights, support testing, and promote best practices in design efficiency and component reuse. Gain exposure to how global collaboration drives innovation and accelerates development. Drive Continuous Improvement: Contribute ideas that improve product performance, sustainability, and process efficiency. Participate in design reviews and testing activities that push the boundaries of what's possible. Capture your learnings to strengthen team knowledge and leave a lasting impact on future products. SPECIFIC RESPONSIBILITIES Contribute to real product innovation: Support the design and development of new luxury products from early concept through testing and validation, working alongside engineers who bring ideas to market. Develop and document specifications: Help translate customer insights, regulatory needs, and technical requirements into clear product documentation under the guidance of senior engineers. Apply and grow engineering skills: Use CAD tools to create 3D models, engineering drawings, and prototypes that support design reviews and performance testing. Be part of the problem-solving process: Participate in product testing, data analysis, and root-cause investigations to enhance design performance and manufacturing efficiency. Collaborate across disciplines: Work closely with design, sourcing, and manufacturing teams to understand how products move from idea to production. Share what you learn: Capture insights, lessons, and design improvements to strengthen team knowledge and continuous improvement efforts. Skills/Requirements * Currently pursuing a Bachelor's degree in Mechanical Engineering (or related field) from an ABET-accredited university. * Foundational experience with 3D modeling and design tools (e.g., Creo, SolidWorks, or similar). * Demonstrated ability to test, analyze, and solve technical problems independently, with guidance from senior engineers as needed. * Strong communication, organization, and attention to detail skills with a collaborative mindset. * Must be legally authorized to work in the United States on an on-going bases without company sponsorship Applicants must be authorized to work in the US without requiring sponsorship now or in the future. Why Choose Kohler? We empower each associate to #BecomeMoreAtKohler with a competitive total rewards package to support your health and wellbeing, access to career growth and development opportunities, a diverse and inclusive workplace, and a strong culture of innovation. With more than 30,000 bold leaders across the globe, we're driving meaningful change in our mission to help people live gracious, healthy, and sustainable lives. About Us It is Kohler's policy to recruit, hire, and promote qualified applicants without regard to race, creed, religion, age, sex, sexual orientation, gender identity or expression, marital status, national origin, disability or status as a protected veteran. If, as an individual with a disability, you need reasonable accommodation during the recruitment process, please contact *********************. Kohler Co. is an equal opportunity/affirmative action employer.

Mechanical Product Development Engineer - Document & Mail Automation OPEX Corporation is currently looking for a full time Mechanical Product Development Engineer to work at our World Headquarters in Moorestown, NJ. This position reports to the Product Development Mechanical Engineering Manager and is focused on the development of automation equipment and processes in the fields of mail processing and document imaging. Please review the videos and product literature on our opex.com website to learn more about our company, the industries we serve and the solutions we develop. Responsibilities The Mechanical Product Development Engineer will play a key role in conceiving of, developing and productizing industry-leading, highly integrated, software controlled electro-mechanical solutions that drive process efficiency and transactional integrity for our customers. This role will: Ultimately lead the delivery of complex production-level designs for new products and support those new products through production start and initial field adoption Collaborate with all engineering disciplines as well as management, manufacturing and service representatives Architect new products and product improvements Participate in project schedule creation Participate in brainstorms of best ideas and solutions Lead analytical and empirical design-guidance data mining efforts Lead design efforts within and beyond CAD Strive to deliver solutions that meet functional, cost and schedule requirements Provide guidance to mechanical designers and technicians Lead and participate in concept and design reviews Develop necessary breadboards and prototypes Lead design-confirmation testing Lead reliability testing Provide timely and accurate project updates to management Work closely with in-house manufacturing and assembly teams and outside vendors Close projects in a strong manner by ensuring timely delivery of manufacturing documentation, cost data and necessary safety certificates Take ownership of tasks from start to finish Requirements BS or MS in Mechanical Engineering 5+ years of hands-on electro-mechanical product/machine/equipment design engineering experience Experience bringing creative and innovative mechanical solutions to and through Production 3+ years of Solid Modeling experience (Inventor, Creo/ProEngineer, Solidworks, etc.) Injection molded plastic part design experience would be a plus Excellent written and verbal communication skills Demonstrated engineering creativity, organizational skill and ability to multi-task Hands-on design guidance and design confirmation testing and data acquisition experience Mechanical analytical experience (FEA, DOE, Test Plans, Engineering statistical analysis, tolerance analysis, etc.) Strong understanding of manufacturing processes and how to design to best leverage them Strong team player and comfortable leading small groups of engineers and designers Demonstrated ability to own an assignment and see it through to completion Skilled in the areas of schedule and cost estimation and adherence Comfortable working on cross-functional teams of mechanical, electrical, software and safety engineers and able to collaborate effectively and efficiently Engineering project management experience would be a plus Experience with designing electro-mechanical products for high volumes (10k+ per year) would be a plus A keen design eye and experience reviewing others' design work would be a plus Design engineering experience in the printing, scanning, copying industries would be a plus Ability to travel when necessary (typically less than 2 weeks per year) Physical/Work Environments Employee will primarily be working in an office environment with occasional travel to customer sites (4 days in the office per week) Sitting for an extended period of time Some walking between facilities Employee will frequently lift up to 10 lbs and occasionally lift up to 25 lbs

Primary Duties & Responsibilities New Product Development - 70% • Mechanical design prime for optical communication module, line cards and/or chassis • Perform fast turn mechanical and thermal feasibility analysis for customer RFQs. • Perform mechanical and thermal analysis required to verify design performance and reliability against specifications • Produce 3D and 2D drawings for assemblies and components, DXF for PCB, • Perform DFMEA with engineering team DFM with internal and external vendors • Prioritize and manage schedule when working on multiple designs in parallel. Continuous Improvement- 20% • Design for lower cost and higher performance • Improve guidelines and best practices for mechanical design • Interact with larger Coherent team to foster new technologies and design approaches Manufacturing Support - 10% • Provide technical support for manufacturing personnel. • Processes troubleshooting and yield improvement. Education & Experience • Bachelor degree or above in Mechanical design, Manufacturing and Automation or other relevant fields • 5+ years of experience in mechanical design/simulation/test engineering, experience in telecommunication industry is preferred. • Experience with Solid works software • Experience with fiber optics products and assembly procedures • Experience with Office applications. Skills & Other Requirements • In-depth technical knowledge and understanding the basic guide of mechanical design and tolerance analysis, sheet metal design, CNC part design, plastic design, die-casting design etc. • The knowledge of heatsinking and thermal design in fan cooled systems: thermal pads, thermal shim, thermal grease, heatsink design and attachment. • Excellent skills with Solid works, Mechanical DVT and test methods • Strong ability to solve complex problems and arrive at sound technical decisions in short timeframes • Knowledge of Telecom and Data Center environmental and mechanical requirements • English both written and oral. Chinese may be a benefit. Working Conditions • May require occasional off-site meetings or travel • Regular use of a computer and other office equipment is necessary • Interaction with team members and external contacts is a regular part of the job • May require occasional overtime and flexibility in work hours to accommodate the executive's needs • . Physical Requirements • Sitting for extended periods while working on a computer or conducting meetings. • Use of hands and fingers for typing, writing, and handling documents. • Occasional lifting of objects or materials up to 20 pounds for administrative tasks. • Ability to communicate verbally and in writing. • Mobility within the office environment to attend meetings Safety Requirements All employees are required to follow the site EHS procedures and Coherent Corp. Corporate EHS standards. Quality and Environmental Responsibilities Depending on location, this position may be responsible for the execution and maintenance of the ISO 9000, 9001, 14001 and/or other applicable standards that may apply to the relevant roles and responsibilities within the Quality Management System and Environmental Management System. Culture Commitment Ensure adherence to company's values (ICARE) in all aspects of your position at Coherent Corp.: Integrity - Create an Environment of Trust Collaboration - Innovate Through the Sharing of Ideas Accountability - Own the Process and the Outcome Respect - Recognize the Value in Everyone Enthusiasm - Find a Sense of Purpose in Work Coherent Corp. is an equal opportunity/affirmative action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law. If you need assistance or an accommodation due to a disability, you may contact us at ****************************** .