Senior mechanical engineer jobs in Waterbury, CT

*\*\* TO BE CONSIDERED FOR THIS POSITION APPLICANTS ARE REQUIRED TO CARRY AN ENGINEERING LICENSE. MUST BE A U.S. CITIZEN. MUST HAVE 4+ YEARS OF EXPERIENCE IN MECHANICAL ENGINEERING. \*\** *Mechanical Engineer - *PE - Engineering license required. _*Oak Point Associates*_ is seeking an energetic and motivated Licensed Mechanical Engineer with a passion for the design and detailing of buildings, sustainability, and the overall construction process to join our award-winning team. If you are eager to take the next step in your career and join a company that provides a supportive work environment, excellent benefits, and opportunities for professional growth, this may be the ideal opportunity for you! This hybrid position (3 days in office, up to 2 days remote) is available in our Glastonbury, CT office. Oak Point Associates is a dynamic, full-service architecture and engineering firm with offices in Biddeford, ME, Portsmouth, NH and Glastonbury, CT. Our work focuses on projects of all sizes, with our largest market sectors being in K-12 Education, Higher Education and Federal Government contracts. We offer competitive salaries, licensure assistance, paid time off, health insurance, continuing education reimbursement, 401K match and a flexible work schedule. We foster a company culture that encourages wellness, and offer numerous outings during the year, company ski condos, and a company Strava group that collaborates on a yearly fitness goal. *Responsibilities Include:* * Design of HVAC, plumbing, and sprinkler systems * Heating load, cooling load, and energy calculations * Collaboration with other engineers, architects, interior designers and landscape architects to develop creative design solutions * Evaluation and development of highly efficient HVAC systems including Geothermal, VRF, and energy recovery systems * Plumbing calculations and design * Sprinkler calculations and design * Preparation of specifications and cost estimates *Minimum Requirements:* * Bachelor of Science in Mechanical Engineering (BSME) or Mechanical Engineering Technology (BSMET) degree from an accredited university * 5-10 years of experience. * HVAC and Plumbing Design experience * Engineering License in Maine or New Hampshire or the ability to obtain through reciprocity * Strong written and oral communications * U.S Citizenship _*Oak Point Associates*_ is an Equal Opportunity Employer. Job Type: Full-time Pay: $100,000.00 - $120,000.00 per year Benefits: * 401(k) * 401(k) matching * Dental insurance * Flexible schedule * Flexible spending account * Health insurance * Life insurance * Paid time off * Professional development assistance * Retirement plan * Tuition reimbursement * Vision insurance Application Question(s): * Are you a U.S. Citizen? ** this is a requirement for the job** Education: * Bachelor's (Required) License/Certification: * Professional Engineer (Required) Ability to Commute: * Glastonbury, CT 06033 (Required) Ability to Relocate: * Glastonbury, CT 06033: Relocate before starting work (Required) Willingness to travel: * 25% (Preferred) Work Location: In person

Mechanical Design Engineer (Building Systems) $54/hr - $58/hr + Bonus + Training + Progression + Overtime + 401k + Medical + Dental + Vision Westport, Connecticut (Commutable from: Norwalk, Fairfield, Darien) Are you a Mechanical Engineer looking to take the lead on a range of technical projects within mechanical building systems and progress your career into lead roles in the future, while getting full on the job training on electrical & plumbing systems to broaden your expertise. On offer is a change to increase your responsibility and take the technical lead on innovative mechanical design projects for household name clients. You will receive all the tools to develop into a technical expert in the future. This company are specialists within their industry, and are now in a phase of exciting growth as an organization. This is a unique opportunity to get in at the ground floor of already well-established organization. On offer is a chance to work on one-of-a-kind projects with household name clients, surrounding mechanical building systems, you will develop into a technical expert in the industry and progress your career through clear pathways into leadership. This role would suit a Mechanical Design Engineer from a building system background, looking to broaden their experience and play a key role in the growth of an exciting organization. The Role: Mechanical Design of intricate building systems Work closely with key household name client supporting their needs Progress into a technical expert in the future The Candidate: Building System Mechanical Design experience AutoCAD & Revit experience Understanding of Building Codes To apply for this role or to be considered for further roles, please click "Apply Now”, or contact Edward Chandler at Rise Technical Recruitment. Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set. We are an equal opportunities employer and welcome applications from all suitable candidates. Keywords: Mechanical Design Engineer; Mechanical Engineer; Building Systems; HVAC Design; MEP Engineering; Mechanical Building Systems; Building Services Engineering; Mechanical Drafting; AutoCAD; Revit; BIM; 3D Modelling; Technical Design; Mechanical Layouts; Building Codes; Construction Codes; Mechanical Schematics; Piping Design; Plumbing Systems; Electrical Systems Training; Multidisciplinary Engineering; Facilities Engineering; Commercial Buildings; Design Engineering; Project Engineering; Technical Lead; Engineering Progression; Engineering Training; Westport CT; Connecticut Engineering Jobs; Norwalk; Fairfield; Darien; Mechanical Engineering Contractor; Engineering Consultancy; Building Services Projects; Client-Facing Engineer; Mechanical System Integration.

Hybrid Work Environment / 90-95k / Hartford County, CT We are seeking a highly skilled Tier 3 Infrastructure Engineer to support, maintain, and enhance our enterprise IT infrastructure. This role requires deep expertise in Windows servers and related applications, as well as strong hands-on experience with networking technologies including switches, firewalls, and routing. The Tier 3 Engineer will serve as an escalation point for complex issues, lead infrastructure projects, and ensure the stability, security, and scalability of systems across the organization. Responsibilities: Provide Tier 3 support for Windows servers, Active Directory, O365, and related applications. Configure, monitor, and maintain core infrastructure components, including networking switches, routers, and firewalls. Troubleshoot and resolve escalated system, server, and networking issues to minimize downtime. Perform system upgrades, patching, and migrations while ensuring minimal business disruption. Collaborate with Tier 1 and Tier 2 teams to provide mentorship and knowledge transfer. Implement and enforce security best practices, monitoring systems for vulnerabilities and threats. Manage backups, disaster recovery, and business continuity planning for critical infrastructure. Document infrastructure configurations, processes, and troubleshooting procedures. Participate in on-call rotation for critical incidents as required. Qualifications: Proven experience as a Tier 3 Infrastructure Engineer, Systems Engineer, or similar role. Strong expertise in Windows Server environments, Active Directory, and related enterprise applications. Hands-on experience with networking hardware (switches, routers, firewalls) and protocols (TCP/IP, DNS, DHCP, VPN). Knowledge of virtualization platforms (VMware, Hyper-V) and cloud services (Azure, AWS) is a plus. Familiarity with security frameworks and compliance standards. Excellent problem-solving and communication skills. Relevant certifications such as Microsoft (MCSA/MCSE), Cisco (CCNA/CCNP), or CompTIA Security+ are highly desirable.

At Mercor, we're building the talent engine that helps leading labs and research orgs move AI forward. Our latest initiative focuses on benchmarking and improving model performance and training speed across real ML workloads. If you're an early-career Machine Learning Engineer or an ML PhD who cares about innovation and impact, we'd love to meet you. ## What to Expect As a Machine Learning Engineer, you'll tackle diverse problems that explore ML from unconventional angles. This is a remote, asynchronous, part-time role designed for people who thrive on clear structure and measurable outcomes. - **Schedule:** Remote and asynchronous-set your own hours - **Commitment:** ~20 hours/week - **Duration:** Through December 22nd, with potential extension into 2026 ## What You'll Do - Draft detailed natural-language plans and code implementations for machine learning tasks - Convert novel machine learning problems into agent-executable tasks for reinforcement learning environments - Identify failure modes and apply golden patches to LLM-generated trajectories for machine learning tasks ## What You'll Bring - **Experience:** 0-2 years as a Machine Learning Engineer or a PhD in Computer Science (Machine Learning coursework required) - **Required Skills:** Python, ML libraries (XGBoost, Tensorflow, scikit-learn, etc.), data prep, model training, etc. - **Bonus:** Contributor to ML benchmarks - **Location:** MUST be based in the United States ## Compensation & Terms - **Rate:** $80-$120/hr, depending on region and experience - **Payments:** Weekly via Stripe Connect - **Engagement:** Independent contractor ## How to Apply 1. Submit your resume 2. Complete the System Design Session (< 30 minutes) 3. Fill out the Machine Learning Engineer Screen (engineering, and research use Mercor to work on frontier projects shaping the next era of AI.

Senior Project Engineer - Heavy Civil & Structural Engtal is partnering with a leading heavy civil contractor recognized for delivering complex transportation and infrastructure projects across Connecticut. With strong self-performance capabilities-including structural concrete, steel work, and major civil scopes-the team maintains exceptional control over quality, schedule, and safety. We are seeking a Senior Project Engineer to support and coordinate structural and civil operations on large-scale infrastructure projects in the Norwalk area. This role is perfect for someone with a strong technical foundation in heavy civil work who excels in detailed coordination, engineering support, and field-driven problem solving. Key Responsibilities: Support the planning, engineering, and execution of structural and civil scopes from design through completion. Coordinate closely with field teams, subcontractors, fabricators, inspectors, and design partners. Manage submittals, RFIs, shop drawings, and technical documentation. Assist with schedule updates, quantity tracking, cost control, and change management. Provide field engineering support, including layout coordination, constructability reviews, and issue resolution. Ensure compliance with safety standards and project-specific engineering requirements. Contribute to developing means & methods, sequencing plans, and technical work packages. Qualifications: 4-7+ years of experience in heavy civil, structural, or infrastructure construction. Strong understanding of structural systems, steel or concrete operations, and civil construction practices. Experience working on transportation, bridge, or major infrastructure projects preferred. Proficiency with construction documentation, scheduling tools, and field engineering processes. Excellent communication, coordination, and problem-solving skills. Ability to work collaboratively with field teams and contribute to high-quality, safe execution. Why Join: Contribute to major, high-impact infrastructure work in the Norwalk region. Work within a contractor that self-performs key scopes, offering deep technical exposure and real project influence. Strong culture of safety, teamwork, and professional development. Opportunity to grow into higher-level project management roles with top-tier leadership support.

Are you an experienced Project Engineer with a background in heavy highway and bridge construction? We are seeking a highly skilled professional to join our team and support major infrastructure projects across Connecticut. If you have strong technical expertise, proven field coordination skills, and the ability to work effectively with CTDOT and project teams, we'd love to speak with you. Key Responsibilities • Support overall project design, engineering, and construction activities • Coordinate and interface directly with CTDOT • Assist with developing construction means and methods, working drawings, and submittals • Prepare, process, and track change orders • Coordinate and schedule material and equipment deliveries • Manage transmittals, submittals, RFI's, and documentation • Ensure compliance with all relevant standards, codes, and specifications • Oversee subcontractor coordination and monitor for contract adherence • Investigate and resolve engineering and construction challenges • Facilitate effective communication between field staff and the project team Required Skills & Qualifications • Minimum 5 years of heavy highway/bridge construction experience • B.S. in Civil or Mechanical Engineering preferred • Strong knowledge of CTDOT standard specifications • Excellent verbal and written communication skills • Ability to prepare clear and concise technical reports and correspondence • OSHA 10 and/or OSHA 30 certification • Must meet US work authorization requirements (I-9 compliant) • Valid driver's license Working Conditions • Work outdoors in varying weather and temperature conditions • Sit and/or stand for extended periods • Use of standard office and drafting equipment requiring manual dexterity • Visual acuity required for reviewing plans and technical work • Occasional walking on uneven terrain or across bridges • May require working more than 40 hours per week or irregular schedules If you are a motivated Project Engineer looking to grow your career and contribute to major infrastructure projects, we encourage you to apply!

As an AI Engineer, you will develop and optimize systems that integrate large language models (LLMs), vector databases, and other AI technologies to enhance how our researchers analyze information, discover patterns, and generate ideas. You'll work closely with quantitative researchers to translate complex market and research needs into intelligent, scalable solutions that support systematic trading innovation. Design and implement AI systems using LLMs, vector databases, and related tools for quantitative research applications such as literature review, data retrieval, and code generation. Deploy, monitor, and scale AI solutions in production, ensuring robust integration with existing infrastructure and real-time data pipelines. Collaborate with quant researchers and portfolio teams to build AI tools that accelerate discovery and improve decision-making. Stay at the forefront of AI and NLP research, contributing to internal innovation and thought leadership initiatives. Identify and mitigate risks related to AI use - including bias, data integrity, and model robustness. Continuously optimize performance and reliability of deployed AI models and systems. Job Requirements 2+ years of hands-on experience developing or deploying LLMs, AI, or deep learning models in high-performance or production environments. Experience working with large-scale datasets and real-time data systems. Strong knowledge of modern NLP techniques and frameworks (e.g., tokenizers, transformers, embedding models). Proficiency with AI/ML tools and platforms, such as PyTorch, Hugging Face, or OpenAI APIs. Familiarity with financial data or algorithmic trading systems is a strong plus. Excellent analytical and problem-solving skills, with the ability to translate complex requirements into scalable technical solutions.

Haugland Group, a privately-owned civil infrastructure and energy construction company has an immediate opportunity for a Civil Project Engineer in our Massachusetts territory. We are looking for an experienced, self-motivated, highly organized individual to join the Project Management team to provide all facets of construction project support, including submittal processing, material management, and budget analysis. At Haugland, we understand that pushing the boundaries of what has been done is essential to develop the infrastructure of tomorrow. The journey won't be simple, but what gets us there is. At Haugland Group, Our Word is Our Way. We are leaders in building what's next because we see the path to get there and we're setting a new standard of exceptional along the way. Let's build together! Key Functions Initiate, prepare, review, develop, track, and distribute submittals and RFIs through Procore. Track file documentation (e.g., correspondence, reports, etc.) in Procore daily to follow-up on and/or summarize project issues, agreements, communications with owners and subcontractors, etc. Reconcile paperwork with the Owner's Field Rep to ensure accurate and proper completion of timesheets. Engage the work crews in conversation on both the technical and safety aspects of the job. Confirm installation is in accordance with specification and/or manufacturers' recommendation. Conduct daily log entries. Ensure progress photos are taken, cut sheets, field drawing marked up, T&E sheets verified/signed (if any), and constructed field measurements are completed daily. Interface with Cost Engineer to track invoices and receipts for field purchase orders and maintain field purchase order files and documentation. Coordinate fabrication and delivery of materials with project CPM, Project Manager, and Superintendent. Interface with Cost Engineer to code and approve PO invoices, coordinating with Accounts Payable and Project Support team. Review and submit quantities to owner for approval. Assist the Project Manager in budget analysis and cost projections. Assist in management of all subcontractors. Gather and submit closeout documentation. Assist Project Manager with projections and costs to complete. Desired Qualifications 3+ years of relevant experience, preferably Civil Engineering. Bachelor's degree in civil engineering preferred. Proficient in the use of Microsoft Office and standard computer applications. Display a high level of initiative, effort, and commitment towards completing assignments in a timely manner. Ability to identify problems; determine accuracy and relevance of information; use sound judgment to generate and evaluate alternatives and make recommendations. Effective communication skills, interpersonal and organizational skills, and a strong work ethic. Why Haugland? Compensation range for this role is 100k-145k. At Haugland Group, our benefits are designed to convey company culture and values which has employees at its forefront. Excellent benefits package including medical, prescription drug, dental, vision, Health Savings, short/long term disability, and life insurance 401k with 5% employer match Employer funded Dependent Care FSA Potential for annual performance-based raise Paid Time off Paid company observed holidays Educational and professional advancement opportunities Frequent company-sponsored events Relaxed, friendly office Fast-paced, exciting environment Haugland Group LLC and its operating divisions, affiliates, related entities, and subsidiaries (collectively, “the Company”) do not accept unsolicited resumes from search firms or employment agencies. Unsolicited referrals and resumes are considered property of the Company and therefore, the Company will not pay a fee for any placement resulting from the receipt of an unsolicited referral. Only upon the Company's written request may preferred vendors may be invited to refer talent for specific open positions. In these cases, a fully executed agreement with the Company must be in place and current. We are an Equal Opportunity Employer. It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to minimal penalties and civil liability.

Who We Are Precision Combustion, Inc (PCI) is a leader in innovative clean energy technologies, specializing in advancements in fuel cell systems for terrestrial and space applications, catalytic fuel reforming, chemical processes, and carbon utilization technologies. Our dedicated team is committed to developing solutions that drive efficiency and sustainability in energy applications. Role Overview As a Mechanical Design Engineer at PCI, you will engage in the design, development, and testing of value-added systems and components, including Solid Oxide Fuel Cell (SOFC), integral to our state-of-the-art energy technologies. You will work closely with multidisciplinary teams to bring innovative concepts to fruition and to troubleshoot technical problems, ensuring high-quality and reliable product designs that meet customer needs. Key Responsibilities Design and analyze mechanical components and systems for clean energy applications. Collaborate with cross-functional teams to improve existing designs and develop new product concepts. Execute simulations (Computational Fluid Dynamics, thermal, and FEA), laboratory tests, and validations on mechanical systems to ensure performance and reliability. Prepare and maintain technical documentation including design specifications, test results, reports, and presentations. Utilize CAD tools for detailed design and prototyping of mechanical components. Support the component and prototype manufacturing process with design guidelines and product specifications. Requirements Bachelor's degree in Mechanical Engineering is preferred . 3+ years of experience in mechanical design engineering, preferably in the clean energy or related industries. Ideally with direct experience in the design of SOFCs or with High-Pressure High-Temperature flow systems. Proficient in CAD software (e.g., SolidWorks, AutoCAD) for 3D modeling and design. Strong analytical skills with experience in mechanical simulations (FEM/CFD, FEA analysis). Familiarity with materials selection and manufacturing processes. Excellent communication and teamwork skills to collaborate effectively with cross-disciplinary teams. Proactive approach to problem-solving and innovation. Benefits At PCI you'll find cohesive teams and a culture that promotes open communication and support. We also recognize that we are a team made up of individuals with full lives that extend beyond the work day. Our policies and benefits are crafted with our employees in mind. We offer: A competitive salary and benefits platform (medical/dental/vision; STD/LTD, Life Insurance and more) 401(k) with company match Paid Time Off, 10 paid Holidays, and Paternal Leave Tuition reimbursement for continuing education Flexible work hours Growth and Development opportunities More information can be found on our Career page at pci.energy

Introduction to the job ASML US, including its affiliates and subsidiaries, bring together the most creative minds in science and technology to develop lithography machines that are key to producing faster, cheaper, more energy-efficient microchips. We design, develop, integrate, market and service these advanced machines, which enable our customers - the world's leading chipmakers - to reduce the size and increase the functionality of their microchips, which in turn leads to smaller, more powerful consumer electronics. Our headquarters are in Veldhoven, Netherlands, and we have 18 office locations around the United States including main offices in Chandler, Arizona, San Jose and San Diego, California, Wilton, Connecticut, and Hillsboro, Oregon. Founded in 1984, ASML is the world's leading provider of lithography systems for the semiconductor industry, manufacturing complex machines that are critical to the production of integrated circuits or microchips. The mission of the Mechanical Development department is to design and develop the complex mechanics for these machines, which are some of the highest precision products ever produced in the world. This position is based on-site in Wilton, CT, which has both R&D and manufacturing operations. We design and produce multiple sub-system modules that are shipped to our headquarters in Veldhoven, The Netherlands where they are integrated into the full lithography machine. Role and responsibilities As a Mechanical Design Engineer, you will be responsible for developing portions of the lithography system and/or associated tooling. You will work on sub-systems involving robotics, mechatronics, precision mechanics, and/or optomechanics. Precision machine design at ASML starts with understanding the functional requirements and deriving specifications. You will collaborate with system architects in a multidiscipline project team to develop concepts, perform engineering analysis, build and test prototypes, generate detailed CAD designs, create engineering drawings, partner with suppliers, and support system integration and testing. This position is located on-site in Wilton, CT. It requires onsite presence to attend in-person work-related events, trainings and meetings and to further ensure teamwork, collaboration and innovation. Experience and education Minimum of a Bachelor's or Master's degree in Mechanical Engineering and must have project or work experience that includes mechanical design. The hired candidate must have ability to communicate effectively in the English language both written and oral. We are seeking an individual with a strong background in mechanical design and engineering, including taking responsibility of the full “art to part” development cycle. A background in mechanical design of mechatronics, precision design, or complex optical systems is desirable, as well as good complex mechanical system intuition. Preferred skills for this job include: Mechanical design exposure to kinematics, dynamics, material properties and behavior, and structural analysis. Experience with 3D solid modelling for design conceptualization and realization. Basic experience with mechanical analytical techniques, including “first principle” engineering equations and Finite Element Analysis such as stress, strain, deformation, modal response, etc. Demonstrated ability to derive conclusions from analysis and make practical recommendations. Strong technical writing, communication and presentations skills. Skills Working at the cutting edge of tech, you'll always have new challenges and new problems to solve - and working together is the only way do that. You won't work in a silo. Instead, you'll be part of a creative, dynamic work environment where you'll collaborate with supportive colleagues. There is always space for creative and unique points of view. You'll have the flexibility and trust to choose how best to tackle tasks and solve problems. To thrive in this job, you'll need the following skills: Capability to interface with multidisciplinary groups including senior leadership. High energy self-motivated team player with strong desire to learn. Possess strong leadership and ownership characteristics with commitment to achieve results on time. Potential to develop into a technical leader in the organization. Can learn and apply new information or skills. Must be able to read and interpret data, information, and documents. Strong customer focus and commitment to customer satisfaction through prioritization, quality, efficiency and professionalism. Ability to complete assignments with attention to detail and high degree of accuracy. Proven ability to perform effectively in a demanding environment with changing workloads. Result driven-demonstrate ownership and accountability. Identifies bottlenecks and drives improvements. Work independently or as part of a team and follow through on assignments with minimal supervision. Demonstrate open, clear, concise and professional communication. Ability to establish and maintain cooperative working relationships with co-workers and customer. Can observe and respond to people and situations and interact with others encountered in the course of work. Work according to a strict set of procedures within the provided timelines. Other information This position is located on-site in Wilton, CT. It requires onsite presence to attend in-person work-related events, trainings and meetings and to further ensure teamwork, collaboration and innovation. A flexible workplace arrangement may be available to employees working in roles conducive to remote work (up to two days a week). Role within Office & Essential Job Functions The essential job functions for this position include, but are not limited to: Work in a fast-paced office environment, including working in a standing or seated position for long periods sometimes exceeding 8 hours per day, 5 days per week. Commute to ASML's facility and report to work on a regular and timely basis and complete the scheduled workday on a consistent basis. Routinely required to sit; walk; talk; hear; use hands to finger, handle, and feel; stoop, kneel, crouch, twist, reach, and stretch. Occasionally required to move around the campus. Perform office tasks using simple hand grasping, fine hand manipulation and reach associated with assigned tasks such as paperwork, computer keyboarding (e.g., Word, Excel, PowerPoint), filing, calculating, and use of telephone or other handheld electronic devices, continuously sometimes exceeding 8 hours per day, five days per week. Have a sufficient ability to communicate, through sight, hearing, and/or otherwise, to perform assigned tasks and maintain proper job safety conditions. Occasionally lift and/or move up to 20 pounds. May require travel (specify domestic and/or international) dependent on business needs up to ~10%. Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception, and ability to adjust focus. Perform other functions that may be assigned. Additional Responsibilities (as needed in the cleanroom and/or labs): The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be willing to work in a clean room environment, wearing coveralls, hoods, booties, safety glasses and gloves. Working under ISO 9000/14000 standards. The environment in the cleanroom is moderate in temperature with moderate to high noise level. Safely working around lasers; on ladders; on platforms; around chemicals; near strong magnetic fields; around high voltage and currents. The employee is occasionally required to move around the campus. Additional Responsibilities: There is potential for exposure to strong magnetic fields, high voltage and currents. This position requires access to controlled technology, as defined in the United States Export Administration Regulations (15 C.F.R. § 730, et seq.). Qualified candidates must be legally authorized to access such controlled technology prior to beginning work. Business demands may require ASML to proceed with candidates who are immediately eligible to access controlled technology. Inclusion and diversity ASML is an Equal Opportunity Employer that values and respects the importance of a diverse and inclusive workforce. It is the policy of the company to recruit, hire, train and promote persons in all job titles without regard to race, color, religion, sex, age, national origin, veteran status, disability, sexual orientation, or gender identity. We recognize that inclusion and diversity is a driving force in the success of our company. Need to know more about applying for a job at ASML? Read our frequently asked questions. Request an Accommodation ASML provides reasonable accommodations to applicants for ASML employment and ASML employees with disabilities. An accommodation is a change in work rules, facilities, or conditions which enable an individual with a disability to apply for a job, perform the essential functions of a job, and/or enjoy equal access to the benefits and privileges of employment. If you are in need of an accommodation to complete an application, participate in an interview, or otherwise participate in the employee pre-selection process, please send an email to USHR_Accommodation@asml.com to initiate the company's reasonable accommodation process. Please note: This email address is solely intended to provide a method for applicants to initiate ASML's process to request accommodation(s). Any recruitment questions should be directed to the designated Talent Acquisition member for the position.

Job Title Business Unit Department Reports To Product Design Engineer Chore-Time Engineering Engineering Manager BU Location BU Acceptance Approved By: Date Approved Milford, IN Overall Purpose: Why the Job Exists & What You Will Do: As the Product Design Engineer, you will design, develop, and create innovative poultry components and equipment to meet customer expectations and business goals. Essential Job Functions & Expected Outcomes: Your Accountabilities in the Role Product Design & Development: 100% of the Job Communicates and collaborates with customers, dealers, and network to establish product needs within the industry, as well as research competitive product lines, to create new or enhanced products that will drive business goals. Manages the design, layout, specifications, and testing of new or enhanced products, work with sheet metal and plastics, work with internal and external manufacturing to ensure the quality, timing, resources, and costs meet the overall expected results of the project. Leads, collaborates, and communicates with project team members to direct the detailed product design and implementation, ensuring a best practice approach for optimal implementation results. Travels to assist with product installments, meetings, and trade shows through the U.S. and Internationally to ensure the Voice of the Customer is integrated in every part of the processes. The job criteria may include other duties, responsibilities and activities, which may change or be assigned at any item with or without notice. Position Requirements: Education: Bachelor's Degree in Mechanical or Agricultural Engineering, or a related field; will also consider an equivalent combination of education and experience. Experience: 2+ years of experience with plastic part design, ventilation, fluid mechanics, or product design within an agricultural or farming environment preferred; will consider an entry level person with strong aptitude for the role preferably with related experience/understanding of poultry husbandry and housing. Certification(s): N/A Functional Skills: Strong foundational understanding of engineering and mechanical principles to design parts that include motors, mechanical power components, sheet metal parts, injection mold and extruded plastic parts, material flow, air movement/cooling systems, and movement of material (i.e. feed, eggs, and waste). The position requires strong analytical, problem-solving, conceptual, project management, time management, and organizational skills to take ideas, design a product, and execute to meet market needs. A familiarity with CE European product standards would be a plus. Technology Aptitude/Skills: Strong skill set in AutoCAD/3D CAD programming (Inventor/Vault); ERP system experience is a plus (Oracle preferred); Advanced Microsoft Office Skills (Word, Excel, Teams) required as well. Language Skills: Excellent verbal and written communication skills; will present ideas and outlines to management team, vendors, and customers. Leadership/Behaviors: Ability to work with an experienced team, who is collaborative and supportive. Can learn quickly to move past barriers and be a strong influencer to get things done to own the role. Culture Match: Excellent abstract thinking; creative, conceptual thinker with a solid common-sense approach to create solutions and push through obstacles. High integrity, Dependability, who can handle confidential information well. Will also be Customer-Focused, Cost Conscious, Strives for Excellence, and can thrive in a fast-paced environment. Will also be able to visit farms and interact with customers in a professional, well-received way. Core Values that Apply to All Positions: Integrity in all things Customers are why we exist Profitability is a must Excellence in all we do People make the difference Equipment Used: This role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets and similar machines. This role will often use laboratory testing equipment, measuring instruments, waterjet, 3d printer, and other mechanical equipment to produce prototype and/or test equipment. Physical Requirements to Perform Essential Functions: Ability to operate a motor vehicle as needed for travel in the role Ability to sit at desk for 5+ hours per day Ability to operate keyboard and view computer screen for majority of day 6-7 hours Ability to write ideas/information in a logical flow for 5+ hours per day Ability to read and respond on an on-going basis daily due to nature of the work, throughout the day Ability to read, write and speak English fluently Ability to communicate with others via phone, in-person, and computer on-going Ability to listen to customers, problem-solve, and respond accordingly Ability to sit, stand, bend, reach, kneel, squat, twist, push, pull, walk, stoop, crouch, and carry items frequently Lifting up to 15 lbs. sporadically Environmental Conditions & Travel: The employee is primarily exposed to a normal office environment with moderate noise. The employee is occasionally required to wear suitable Personal Protective Equipment while visiting manufacturing departments and client locations. Testing and engineering lab environment with machines and equipment related to prototyping and testing. This position may be occasionally exposed to animals, dust, and dirt when visiting client locations. This position may face inclement weather conditions when traveling. Travel: 10 - 20% travel is required (Domestic & International) I have reviewed and understand the above . I understand that the company may change this as it deems necessary and at its discretion. I also understand that a copy of this job description is available to me through request to my manager or Human Resources department. Employee Name (Print) Employee Signature Date

Job Description RBC Bearings Incorporated (NYSE: RBC/RBCP) is a leading international manufacturer of highly engineered precision bearings, components and essential systems for the industrial, defense and aerospace industries. Founded in 1919, the Company is primarily focused on producing highly technical and/or regulated bearing products and components requiring sophisticated design, testing and manufacturing capabilities for the diversified industrial, aerospace and defense markets. We currently have 52 facilities, of which 37 are manufacturing facilities in ten countries and our market capitalization is approximately $8.9 billion. JOB TITLE/LOCATION: Applications/Design Engineer ~ Oxford, CT DESCRIPTION: The RBC Division is in search of an Application / Design Engineer to be located in our corporate office in Oxford, CT. The successful candidate will be responsible for both design and application of spherical plain bearings reporting to the SPB Product Engineering Manager. ESSENTIAL FUNCTIONS OF THE JOB: Work directly with RBC customers to satisfy their application needs. Support our external sales and business management personnel by making visits to customers to promote RBC's capabilities. Convert customer requirements into bearing designs. Derive application loading, cycles, and other operating conditions relevant to the bearing application. Based on these inputs, select or alter existing bearing designs to meet customer requirements. Develop new bearing designs as needed Participate in DFMEA, PFMEA events related to product / design application When needed, develop bearing testing requirements for validation of a proposed design. Work closely with test engineers in conducting validation testing Develop manufacturing, grinding, and assembly drawings using SolidWorks. Understand heat treatment specifications as they relate to the bearing designs. Work directly with our manufacturing plants to ensure the proper production of the product designed. Work with the manufacturing division personnel to develop methods of bearing inspection. Other duties as assigned. EDUCATION: Bachelor's degree in Engineering required, Mechanical Design preferred. EXPERIENCE: 3-10 years as Mechanical Engineer or related experience. Bearing experience is preferred. Strong mechanical aptitude SKILLS / CERTIFICATIONS: Bachelor's Degree in an engineering field. Mechanical Engineering preferred. US citizenship is required. Strong mechanical aptitude. Excellent communication skills, capability to interact with customers. 3D Modeling experience in SolidWorks (or equivalent) is desired. Proficiency with Microsoft Office Programs. Travel Approximately 25% We offer competitive compensation and excellent benefits including Medical, Dental, and company matched 401k plan. Interested candidates may send resumes to: ************************** RBC Bearings is an Equal Opportunity Employer, including disability and protected veteran status.

RBC Bearings Incorporated (NYSE: RBC/RBCP) is a leading international manufacturer of highly engineered precision bearings, components and essential systems for the industrial, defense and aerospace industries. Founded in 1919, the Company is primarily focused on producing highly technical and/or regulated bearing products and components requiring sophisticated design, testing and manufacturing capabilities for the diversified industrial, aerospace and defense markets. We currently have 52 facilities, of which 37 are manufacturing facilities in ten countries and our market capitalization is approximately $8.9 billion. JOB TITLE/LOCATION: Applications/Design Engineer ~ Oxford, CT DESCRIPTION: The RBC Division is in search of an Application / Design Engineer to be located in our corporate office in Oxford, CT. The successful candidate will be responsible for both design and application of spherical plain bearings reporting to the SPB Product Engineering Manager. ESSENTIAL FUNCTIONS OF THE JOB: Work directly with RBC customers to satisfy their application needs. Support our external sales and business management personnel by making visits to customers to promote RBC's capabilities. Convert customer requirements into bearing designs. Derive application loading, cycles, and other operating conditions relevant to the bearing application. Based on these inputs, select or alter existing bearing designs to meet customer requirements. Develop new bearing designs as needed Participate in DFMEA, PFMEA events related to product / design application When needed, develop bearing testing requirements for validation of a proposed design. Work closely with test engineers in conducting validation testing Develop manufacturing, grinding, and assembly drawings using SolidWorks. Understand heat treatment specifications as they relate to the bearing designs. Work directly with our manufacturing plants to ensure the proper production of the product designed. Work with the manufacturing division personnel to develop methods of bearing inspection. Other duties as assigned. EDUCATION: Bachelor's degree in Engineering required, Mechanical Design preferred. EXPERIENCE: 3-10 years as Mechanical Engineer or related experience. Bearing experience is preferred. Strong mechanical aptitude SKILLS / CERTIFICATIONS: Bachelor's Degree in an engineering field. Mechanical Engineering preferred. US citizenship is required. Strong mechanical aptitude. Excellent communication skills, capability to interact with customers. 3D Modeling experience in SolidWorks (or equivalent) is desired. Proficiency with Microsoft Office Programs. Travel Approximately 25% We offer competitive compensation and excellent benefits including Medical, Dental, and company matched 401k plan. Interested candidates may send resumes to: ************************** RBC Bearings is an Equal Opportunity Employer, including disability and protected veteran status.

Headquartered in Old Saybrook, CT, Infiltrator Water Technologies is the leading provider of engineered plastic chambers, synthetic aggregates, tanks, advanced wastewater treatment systems, and accessories for the onsite/decentralized wastewater and storm water management industries. The majority of Infiltrator products are manufactured from recycled plastic. Founded in 1987, we operate throughout the US and Canada with 8 manufacturing plants in the US, dedicated sales, and corporate team members. Infiltrator is a pioneer in innovative plastic technologies for underground water management. Infiltrator components are used in most onsite septic systems installed in the United States and Canada. Infiltrator is a proud Corporate Partner of Habitat for Humanity and each year donates components for 50 septic systems serving Habitat homes in North America. Infiltrator is committed to advancing the state of the art in all fronts, including product design, manufacturing, materials, wastewater science, marketing, management, and employee development. In other words, we strive to be the best we can be. Responsibilities Infiltrator Water Technologies has an exciting new role available - Product Design Engineer II. We are seeking an experienced and talented Mechanical Engineer with expertise in plastic design. Here is a bit about the role: New Product development including engineering concept, design analysis, calculations and problem solving. Conduct form/fit feasibility studies on new product concepts. Address product design issues with respect to tooling and manufacturing with other team members. Provides technical support to other departments. Works directly on the development of prototype parts. Responsible for CAD design, drawings and changes. Responsible for conducting design reviews and drawing reviews Apply project management principles to define task workload and timelines. Assure technical quality and design process rigor in execution of all assigned tasks. Apply product lifecycle management approach through PDM software QUALIFICATIONS: Excellent written/verbal communication skills and superior interpersonal skills for interaction with all levels of personnel and contacts within and outside IWT. S. in Mechanical Engineering, preferably with a concentration in plastics part design and molding. Proven creative skills in product design and problem solving through coursework or personal interests. Must have at least 5+ years designing 3D (physical) products that have a high percentage of plastic materials. Hands-on physical skills associated with product development extremely important. Experience with working in a shop environment and ability to make simple prototypes highly desirable. 5+ years with CAD experience required; SolidWorks preferred. Experience with a range of materials (particularly various plastics) and processes (injection molding, thermoforming). Must possess a comfort level with (and interest in) working in a very fast-paced product development environment where ideation and product design rapidly evolve. #HP EEO Statement ADS supports an inclusive workplace that values diversity of thought, experience, and background. We celebrate the power of our differences to create better solutions for our customers by ensuring employees can be their authentic selves each day. ADS is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, ancestry, age, physical or mental disability, sex, sexual orientation, gender identity/expression, pregnancy, veteran status, marital status, creed, status with regard to public assistance, genetic status or any other status protected by federal, state or local law.

Job DescriptionDIRECT HIRE: An amazing opportunity for an experienced Aerospace Engineer to join a dynamic team in the Manchester, CT. area. The successful candidate must have a CNC Machinist background. This isn't a desk-only role. This position bridges design and manufacturing, develops machining processes. The candidate will write and optimize CNC programs. Also work hands-on with machinists to deliver aerospace-grade precision. Salary: $120K - $130K (Based on Experience) Schedule: Monday - Friday, 8AM - 5PM (flexible) Benefits: Medical, dental, vision, 401K, PTO, holidays Role & Responsibilities: Develop and improve CNC processes for aerospace components Program, set up, and optimize multi-axis mills and lathes Support design reviews and ensure manufacturability of complex parts Collaborate with production and quality teams to meet AS9100D / NADCAP standards Lead continuous improvement for tooling, setup time, and cycle efficiency Skills & Experience: Proven CNC machining expertise - you've run the machines yourself Strong aerospace or precision manufacturing background Working knowledge of GD&T, CAD/CAM, and process documentation Ability to solve problems on the shop floor and communicate across teams Engineering degree preferred but not required - hands-on skill is a must Must possess a minimum 10 years' CNC Machinist experience Once you apply, please text "AE" to ************ for a faster reply. INDH Powered by JazzHR BoalutS2Zq

Country: United States of America Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract. Security Clearance: None/Not Required Pratt & Whitney is once again working to transform the future of flight - designing, building, and servicing engines unlike any the world have ever seen. And because transformation begins from within, we're seeking the people to drive it. So, calling all curious. Come ready to explore and you'll find a place where your talent takes flight- beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we'll welcome you into a tight knit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that's evolving fast to the future. At Pratt & Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond? What You Will Do: We are seeking an experienced Manufacturing Engineer to join our team! As part of the Manufacturing Part Cost Modeling discipline, you will contribute to the advancement of part cost forecasting and analysis methods, assess financial impact of new technologies, and support manufacturing cost reduction initiatives. You will be part of a group of specialists responsible for developing and maintaining part cost models. The primary focus will be to create cost models and assess the business implications of new product designs, new technology, and product design changes. Key Responsibilities: Collaborate cross functionally with various stakeholders to include engineering, Global Supply Chain, and the Partnership Program Office. Develop and maintain cost models and methods and define estimating rationale to support part costs Review engineering changes, part drawings, supplier information, and manufacturing data to analyze impact to manufacturing cost Support Manufacturing Readiness (MRL) by providing cost estimates and evaluations Potential to participate in supplier and partner negotiations to substantiate cost model elements Qualifications You Must Have: Bachelor's Degree in Engineering (Manufacturing, Industrial, or Mechanical) or related technical degree At least 3 years of manufacturing experience US Citizenship required due to contracts Qualifications We Prefer: Experience in Export Control and CORE Apprentice Level training (Continuous Improvement Tools) Basic understanding of Supply Chain/Strategic Sourcing processing of LTA agreements Previous use and familiarity with CAD software Learn More & Apply Now: In addition to transforming the future of flight, we are also transforming how and where we work. We've introduced role types to help you understand how you will operate in our blended work environment. This role is: Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance workers, as they are essential to the development of our engines. The salary range for this role is 66,000 USD - 130,000 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

At Mercor, we're building the talent engine that helps leading labs and research orgs move AI forward. Our latest initiative focuses on benchmarking and improving model performance and training speed across real ML workloads. If you're an early-career Machine Learning Engineer or an ML PhD who cares about innovation and impact, we'd love to meet you. ## What to Expect As a Machine Learning Engineer, you'll tackle diverse problems that explore ML from unconventional angles. This is a remote, asynchronous, part-time role designed for people who thrive on clear structure and measurable outcomes. - **Schedule:** Remote and asynchronous-set your own hours - **Commitment:** ~20 hours/week - **Duration:** Through December 22nd, with potential extension into 2026 ## What You'll Do - Draft detailed natural-language plans and code implementations for machine learning tasks - Convert novel machine learning problems into agent-executable tasks for reinforcement learning environments - Identify failure modes and apply golden patches to LLM-generated trajectories for machine learning tasks ## What You'll Bring - **Experience:** 0-2 years as a Machine Learning Engineer or a PhD in Computer Science (Machine Learning coursework required) - **Required Skills:** Python, ML libraries (XGBoost, Tensorflow, scikit-learn, etc.), data prep, model training, etc. - **Bonus:** Contributor to ML benchmarks - **Location:** MUST be based in the United States ## Compensation & Terms - **Rate:** $80-$120/hr, depending on region and experience - **Payments:** Weekly via Stripe Connect - **Engagement:** Independent contractor ## How to Apply 1. Submit your resume 2. Complete the System Design Session (< 30 minutes) 3. Fill out the Machine Learning Engineer Screen (engineering, and research use Mercor to work on frontier projects shaping the next era of AI.

DIRECT HIRE: An amazing opportunity for an experienced Aerospace Engineer to join a dynamic team in the Manchester, CT. area. The successful candidate must have a CNC Machinist background. This isn't a desk-only role. This position bridges design and manufacturing, develops machining processes. The candidate will write and optimize CNC programs. Also work hands-on with machinists to deliver aerospace-grade precision. Salary: $120K - $130K (Based on Experience) Schedule: Monday - Friday, 8AM - 5PM (flexible) Benefits: Medical, dental, vision, 401K, PTO, holidays Role & Responsibilities: Develop and improve CNC processes for aerospace components Program, set up, and optimize multi-axis mills and lathes Support design reviews and ensure manufacturability of complex parts Collaborate with production and quality teams to meet AS9100D / NADCAP standards Lead continuous improvement for tooling, setup time, and cycle efficiency Skills & Experience: Proven CNC machining expertise - you've run the machines yourself Strong aerospace or precision manufacturing background Working knowledge of GD&T, CAD/CAM, and process documentation Ability to solve problems on the shop floor and communicate across teams Engineering degree preferred but not required - hands-on skill is a must Must possess a minimum 10 years' CNC Machinist experience Once you apply, please text "AE" to ************ for a faster reply. INDH

This is an entry level position in manufacturing engineering as part of our manufacturing training and development program. This position will provide an excellent developmental opportunity in operations and manufacturing combined with practical hands on projects contributing directly to the performance and success of the company. This position develops and improves manufacturing processes by studying product and manufacturing methods as well as drives product and process changes to reduce cost and lead time and improve quality and delivery. The position will include a mentorship and corporate exposure. Roles and Responsibilities: • Support manufacturing production processes with all required technical needs. • Develop and improve manufacturing processes by deploying product and manufacturing method enhancements. • Determine product and process manufacturing flow and sequences, material and labor requirements, and quality inspection points. • Create and maintain manufacturing routers and processes • Must be able and willing to work extra time as necessary to ensure completion of assigned tasks Experience in a manufacturing environment desirable.