Tower technician jobs in Birmingham, AL

Service technician to travel throughout the United States and Canada. Provide service at industries associated with the steel, paper, cement, power industries, etc., Travel Req'd: 75% - to be in Pelham Office when not traveling. RESPONSIBILITIES & EXPECTATIONS: Physical Responsibilities after in-house training Supervision of industrial fan installation Inspection of fan installations and associated components to determine if the equipment is safe to operate. Hands on repairs. Supervision of fan repairs. Supervision of millwright work. Supervision of weld repairs. Replacement of sleeve and or anti-friction bearings. Laser coupling alignments. Inspection of support components. Report writing. Technical Responsibilities after in-house training Fan balancing Utilizing a handheld analyzer to perform diagnostic testing to determine the present of unbalance, bearing faults, coupling and or sheave misalignment, rubs, fan stall, blade pass, resonance etc. Fan support analysis. Modal analysis. Natural frequency testing at fan rotors and fan supports. Fan commissioning. Reliability surveys. ATTRIBUTES: Must be willing to travel and work in the field service sector High school diploma or equivalent Pass a background check Pass a drug test Have or be able to obtain a passport Must have a valid driver license Clean driving record Dependable transportation On call 24/7 unless otherwise approved by supervisor Have credit card Computer literate Mechanically inclined Good communication skills Must be able to comprehend training and direction Physical Demands include, but are not limited to: Must be physically able to perform work assigned. Must be physically capable of accessing all plant locations. The employee will be exposed to the following working conditions: Extreme Heat and Cold, Noise, working at heights of 120', Vibration, Oils, and Atmospheric Conditions such as Dust, Fumes, and Particles. The employee will be required to perform the following actions (from time to time): Standing, walking, balancing, stooping, kneeling, reaching, talking, seeing, hearing and sitting. Ability to consistently lift over 50 pounds as needed.

Telecommunication Technician - MSO-EPC The Mobile Switching Office-Evolved Packet Core (MSO-EPC), also known as the Southern Linc Network Operations Center (NOC), is the critical 24 x 7 x 365 monitoring and resolution facility. The primary responsibilities of the position are to provide network monitoring, 1 st level troubleshooting, documentation, and problem resolution for the Southern Linc LTE/4G wireless network. Successful candidate will participate in, coordinate and assist with providing system upgrades, capacity increases, emergency system restoration deployments, storm preparation and response, performance optimization and support the operational efficiency efforts of Southern Linc Wireless. Candidate will provide assistance to support any future build-out work for the Southern Linc LTE/4G network to include centralized Core infrastructure and RAN components, AC/DC power, and other facility-related needs. Candidate will work as part of a team on rotating shifts. These shifts include some nights, weekends and holiday work as the Operations Center is a 24 x 7 operation. JOB REQUIREMENTS + A.S Degree in Computer Science, Electronics, Digital Telecommunications, Data Networking or 3 or more years of technology industry work experience. + AC/DC power experience and knowledge highly desired. Working experience with enterprise-level power rectifiers, inverters and UPS preferred. + Facilities knowledge of cabling techniques and standards, HVAC operation, fire suppression systems and security monitoring systems a plus. + FCC, TCP/IP, Cyber Security and or other data networking certifications are desirable. + Knowledge and experience with installing, maintaining and or troubleshooting legacy TDM transport networks and or data networks is preferred. + Ericsson LTE Evolved Packet Core network experience with various tools, including ENM, Alarm Status Matrix, Alarm List Viewer, as well as Ericsson LTE RBS RAN experience with various tools, including, Element Manager, AMOS is preferred. + Experience with traffic analysis tools, such as NetScout, to identify faults and failures in network and end-user experience is desired. + Field Operations and or central switch office experience preferred. + Strong and proven technical problem-solving skills. + Ability to work and thrive within a team-oriented work environment. + Able to work on a rotating shift work schedule including some nights, weekends and holidays. + Very minimal travel requirements. Limited to training opportunities and the occasional off-site meeting. + Work location is primarily in-office. Occasional teleworking, as a portion of the shift schedule, a possibility. JOB RESPONSIBILITIES + Monitor, evaluate, resolve and/or escalate service impacting issues for the Southern Linc LTE network. + Assist with future buildouts of the Linc LTE/4G Network, including RAN field implementation, transport and networking testing/verification and central Core network expansion. + Provide 1st level identification, troubleshooting, resolution and/or escalation to Network Specialists or vendors for MPLS and TCP/IP data networks and connectivity, Ericsson MiniLink microwave remote troubleshooting. + Implement software configuration changes, replace faulty networking hardware, update maintenance logs, support switch room by installing/removing equipment & cabling, as well as server platforms. + Provide network connectivity wiring in the central Core, implement software configuration changes, as well as provide assistance for system installations, capacity increases, and upgrades of various types. + Provide tactical expertise to execute scheduled network changes system wide. Manage the workforce trouble ticketing system (create, assign, track, document, update and close). + Make effective use of monitoring and testing tools and applications to support various aspects of the LTE network to identify system failures, minimize service affecting problems, and maximize service availability. + Review network performance statistics for system health to identify marginal problems, make daily decisions on break-fix resolution on these issues, dispatch remote personnel to repair when required. + Operate a variety of communications and network test equipment including vendor-specific software tools, TCP/IP testing, data monitoring, and network sniffers. + Remotely troubleshoot and dispatch appropriate field operations and/or third-party vendors to resolve LTE RAN cell site issues. + Generate and analyze reports, charts and alarms to identify and provide solutions to issues/trends. + Working with Systems Engineers and Analysts, provide installation assistance for facilities, such as data and RF cabling, AC/DC power and equipment/rack installation needs. + Offer solutions and coordinate communication between field technicians, technical customer support, Operating Companies, critical customers, and telecommunications vendors. + Work as part of team executing storm/major event preparation and response. Practice Test TECH test: Online Products Login Page (eei.org) Click on "EEI Practice Test" on the right-hand side; a new window to the Edison Electric Institute website will open. Use the following information to log into the site to access the practice test: + Name: _southern_ + Password: _testing_ Practice tests: TECH - Technician Occupations Southern Company (NYSE: SO ) is a leading energy provider serving 9 million customers across the Southeast and beyond through its family of companies. Providing clean, safe, reliable and affordable energy with excellent service is our mission. The company has electric operating companies in three states, natural gas distribution companies in four states, a competitive generation company, a leading distributed energy solutions provider with national capabilities, a fiber optics network and telecommunications services. Through an industry-leading commitment to innovation, resilience and sustainability, we are taking action to meet customers' and communities' needs while advancing our goal of net-zero greenhouse gas emissions by 2050. Our uncompromising values ensure we put the needs of those we serve at the center of everything we do and are the key to our sustained success. We are transforming energy into economic, environmental and social progress for tomorrow. Our corporate culture has been recognized by a variety of organizations, earning the company awards and recognitions that reflect Our Values and dedication to service. To learn more, visit *********************** . Southern Company invests in the well-being of its employees and their families through a comprehensive total rewards strategy that includes competitive base salary, annual incentive awards for eligible employees and health, welfare and retirement benefits designed to support physical, financial, and emotional/social well-being. This position may also be eligible for additional compensation, such as an incentive program, with the amount of any bonus/awards subject to the terms and conditions of the applicable incentive plan(s). A summary of the benefits offered for this position can be found here **************************************************** . Additional and specific details about total compensation and benefits will also be provided during the hiring process. Southern Company is an equal opportunity employer where an applicant's qualifications are considered without regard to race, color, religion, sex, national origin, age, disability, veteran status, genetic information, sexual orientation, gender identity or expression, or any other basis prohibited by law. Job Identification: 15957 Job Category: Telecommunications Job Schedule: Full time Company: Southern LINC

Job Description Introduction C2 Technology Group, located in Birmingham, Alabama is seeking Highly Experienced Network Cabling Field Technicians . This is a full-time position. The ability to work overtime is necessary when required. Typically, short duration travel is required throughout Alabama and neighboring states, with paid lodging and per-diem. Compensation Compensation rates are based on a combination of knowledge, experience, and ability Experience The Technician must have a minimum of 5 years of verifiable experience in the low voltage/telecommunications field. BICSI credentials considered a plus. A high degree of low-voltage knowledge is necessary. Cabling experience with LAN, inter-building backbone, security, and audio/video is necessary. Verifiable credentials supporting knowledge and experience are necessary. Work generally consists of installation of UTP, fiber optic, multi-conductor copper cabling infrastructure, test/certify permanent links, and complete necessary installation and quality assurance reports. This position requires personnel to interact with project managers and engineers, perform surveys, plan tasks, and manage a crew of installers. Experience and character references are necessary and will be subject to verification. Experience with typical industry recognized certification and test equipment, tools, and processes is required. Basic computer skills are required. Must be proficient with Microsoft Office programs (Word, Excel, Outlook, etc...). Safety Candidate must possess a valid driver's license with acceptable driving record. Pre-hire drug screen, background, and DMV checks will be performed. Must be willing to promote and maintain a safe working environment. Must be able to complete necessary job site safety reports. Must be familiar with safe use of various types of portable ladders and elevated work platforms. Physical Must be able to lift and move loads up to 60 pounds. Required to bend, stoop, and move in tight and confined spaces. Required to work while standing for long periods. Required to work in industrial environments in various degrees of heat and cold Must be familiar with safe operation of drills, saws, and various hand tools Must be comfortable working at heights from various types of portable ladders and elevated work platforms. Communications Must possess good communications skills. Must be able to read, write, speak, and understand the English language. Must be able to perform basic mathematical calculations. Must be able to distinguish industry recognized colors. Job Type: Full-time Benefits: 401(k) 401(k) matching Dental insurance Health insurance Life insurance Paid time off Vision insurance Schedule: 8 hour shift Work Location: Multiple locations “Build The Future with C2 Technology Group, a Crete United Company” C2 Technology Group, a Crete United Company, is an equal opportunity employer, considering all applicants for employment regardless of race, color, religion, sex, gender identity, pregnancy, national origin, ancestry, citizenship, age, marital status, physical disability, sexual orientation, genetic information, or any other characteristic protected by state of federal law. Women and minorities are encouraged to apply.

CUI Cable is seeking a skilled and dedicated Cable Technician to join our team. As a Cable Technician, you will be responsible for providing exceptional installation, relocation, troubleshooting, and auditing services for internet, cable, telephone, and alarm systems at our customers' premises. Cable experience is a requirement for this position, and we will provide you with a work truck to carry out your duties effectively. Responsibilities: Perform installations, relocations, troubleshooting, and audits of internet, cable, telephone, and alarm services at customer premises. Adhere to company installation policies to ensure high-quality service delivery. Operate and maintain tools and equipment properly, organizing and stocking the company vehicle with necessary equipment to fulfill job requirements. Prepare and maintain accurate time logs, reports, and related documentation in accordance with company and departmental policies. Requirements: Proficiency in using basic broadband installation tools and hand tools. Ability to lift objects weighing up to 80 lbs., work at heights up to 30 ft., and in confined spaces, including attics. Comfortable working both indoors and outdoors, adapting to different environments as necessary. Possession of a valid driver's license and a satisfactory driving record. Successful completion of thorough background checks and drug screenings. Flexibility in work schedule, including availability to work weekends. Minimum age requirement of 23 years or older. Employee Compensation and Benefits: At CUI, we prioritize your preferences and offer a range of options to suit your needs. We provide both W2 and 1099 employee options with competitive wages, ensuring your success and satisfaction. As part of our commitment to your professional growth, we promote from within and offer advancement opportunities throughout your career journey. Additionally, we offer an attractive list of benefits: Sign on Bonus: $500 - $1,500 dependent on amount of training needed Comprehensive benefit package, including health, vision, and dental coverage. 401k retirement plan with a company match. Company vehicle and gas card for work-related transportation. Weekly pay schedule. Monthly bonus potential. Pay increase after the first year. Paid holidays. Uniforms provided. Company cell phone. Optional Benefits Waived Program: If you own a late model white truck/van and do not require medical benefits, you may be eligible for our Benefits Waived program. Speak with a recruiter for more details. About CUI Cable Services: CUI Cable Services is a leading provider of solutions for multiple system operators (MSOs) in the telecommunications industry. Since 2001, we have been delivering exceptional services, exceeding industry standards. As a registered minority-owned and veteran-owned business, we pride ourselves on practicing our Core 4 values of Honesty, Integrity, Teamwork, and Quality. These values shape our company's culture, drive our decisions, and inspire us to continuously improve and provide the best possible experience for our employees, customers, and partners. Hiring Process: Our efficient hiring process ensures a smooth transition into your future career. Here are the steps involved: Application review and phone screening: Our recruiters will review your application and conduct a phone screen to discuss the job description and your work experience. In-person interview: If selected, you will be invited for an in-person interview with our branch managers. Pre-employment screening: Upon accepting the job offer, you will undergo a pre-employment drug screening and a nationwide background check. Start date: After successful completion of the screening process, we will coordinate your start date. If you are looking to start your career in the cable industry, join the CUI team and become part of our dedicated workforce. Apply today and embark on a rewarding journey with opportunities for professional advancement and personal fulfillment. Join our team at CUI Cable Services and embark on a rewarding career in the telecommunications industry.

Requirements Candidates are required to be in Lowell, Arkansas January 1st to start the position. Candidates are responsible for the first week of pay for food and lodging. After first week candidates will be compensated a per diem weekly. Description We are accepting applications for Travel Technicians to work at various locations across the United States. This job is 100% travel and will consist of installing low voltage wiring and equipment such as IP cameras, Wireless Access Points, Routers, Switches, etc. Qualified candidates should expect to be on the road anywhere from 2 - 8 months at a time. We are seeking a self-starter who can work well with a partner 6 days a week. The Travel Technician will be teamed up with a partner who will travel and work with them for the duration of the project. Benefits: + Per-Diem paid $125 a day for food and lodging. + Company vehicle provided (traveling with a partner) + 70 hour weeks (30 hours overtime) Responsibilities: - Pull and terminate low voltage cable. - Installing network equipment within commercial settings. - Follow instructions and code when pulling cable. - Run low voltage cabling in commercial buildings, including drilling concrete walls and limited conduit work. - Ensuring all cables are neatly tied and bundled according to safety regulations. - Installing of cable support structures such as j-hooks, cable racks, and inner duct. - Conduct tests to ensure all newly installed cable systems and component devices are operational. - Troubleshoot issues with the cable network. - Perform any other duties not specifically stated herein, but which your supervisor may assign. - Adhere to all required project safety requirements as set forth by the client, their customers, or OSHA. - Perform any other duties not specifically stated herein, but which your supervisor may assign. Skills low voltage, installation, wap, install, cctv, cable, cat5, cat6, Cabling, Cable installation, Cable puller, wireless access point, access control, punchdown, telecommunication, troubleshooting Top Skills Details low voltage,installation,wap,install,cctv,cable,cat5,cat6 Additional Skills & Qualifications Requirements: - Experience as a Data Cable Technician. - Available for extensive travel nationwide. - Ability to prioritize tasks. - Able to lift and carry 50 pounds or more multiple times per shift. - Ability to work in cramped spaces. - Hours of project 7 pm - 7 am 5 days a week. - Ability and willingness to travel to Lowell, AR for new hire orientation. - 100% travel of the USA - Ability to operate a scissor lift; and ability to work at heights. - Able to fill out the work order and take care of the tools provided by the office to do the job. - Abide by PPE requirements. Company provides hard hat, vest, and safety glasses. Must provide your own steel-toed boots. - Tools required by the technicians: hand tools, screwdrivers (both standard and Phillips), snips, punch down (impact), toner and probe, pliers, adjustable wrenches, joint pliers, and lineman pliers. - Valid driver's license with a clean driving record; no DUI or DWI in the last three years. Experience Level Intermediate Level Job Type & Location This is a Contract position based out of Birmingham, AL. Pay and Benefits The pay range for this position is $19.00 - $22.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Birmingham,AL. Application Deadline This position is anticipated to close on Dec 17, 2025. h4>About TEKsystems: We're partners in transformation. We help clients activate ideas and solutions to take advantage of a new world of opportunity. We are a team of 80,000 strong, working with over 6,000 clients, including 80% of the Fortune 500, across North America, Europe and Asia. As an industry leader in Full-Stack Technology Services, Talent Services, and real-world application, we work with progressive leaders to drive change. That's the power of true partnership. TEKsystems is an Allegis Group company. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. About TEKsystems and TEKsystems Global Services We're a leading provider of business and technology services. We accelerate business transformation for our customers. Our expertise in strategy, design, execution and operations unlocks business value through a range of solutions. We're a team of 80,000 strong, working with over 6,000 customers, including 80% of the Fortune 500 across North America, Europe and Asia, who partner with us for our scale, full-stack capabilities and speed. We're strategic thinkers, hands-on collaborators, helping customers capitalize on change and master the momentum of technology. We're building tomorrow by delivering business outcomes and making positive impacts in our global communities. TEKsystems and TEKsystems Global Services are Allegis Group companies. Learn more at TEKsystems.com. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

* HIRING IMMEDIATELY!!! * Sign On Bonus Available for Qualified Service Technicians* Whaley Foodservice, LLC is one of the largest commercial kitchen equipment repair service companies in the Southeast comprised of over 600 employees located across 31 geographically dispersed locations. Visit "Whaley Careers" to find your place to grow. ********************************* Pay Rate: $28.00-35.00/hour* At Whaley we know people are vital to our success. We offer a competitive salary, on-call pay, and generous benefits including * Sign-On Bonuses for Experienced Technicians * Company Vehicle | Mobile Device | Uniforms * Meters & Test Equipment * Industry Certification * 401k & Profit Sharing * Paid Holidays & Vacation * Medical & Dental Benefits * Short-Term Disability | Long-Term Disability Insurance (company paid) * Life Insurance (company paid) * Enjoy the benefits of our Town Shares Program - share in our company's success! To learn more about current opportunities, visit Whaley Careers: ********************************* Summary: The Service Technician II provides maintenance, service, and repair for commercial cooking equipment and commercial refrigeration i.e. grills, fryers, ovens, ice machines, reach-in and walk-in coolers, freezers, etc. Details: * Diagnoses, troubleshoots, and repairs commercial cooking kitchen equipment, refrigeration. * Communicates status updates for part order(s) and repairs with branch support and customer. * Completes service calls accurately and timely. * Audits truck stock to ensure required parts are stocked. * Ensures service vehicle, tools, and uniforms are consistent with Whaley standards of safety. * Meets on-call requirements. Required Education | Experience * Three years of experience in commercial kitchen repair and or refrigeration. * Must be 18 years of age. * Completion of a satisfactory background check and drug screen is required. * Valid Driver's license and driving record that aligns with our safety standard. Skills and Abilities * Ability to work independently * Ability to accurately diagnose and troubleshoot: an automotive, electrical, installation, and mechanical background is a plus. * Journeyman License and or CFESA certification not required but would be a plus. * Strong attention to detail. * Excellent communication and soft skills. * Good driving record Whaley Foodservice is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.

A bumper to bumper, master certified technician capable of diagnosing and repairing any system of the automobile without supervision. In most cases, are leaders in the shop and chosen to support the development of other technicians when needed. At times, may be called upon to interface with customers in various capacities. Education High School Experience 4-7 years Additional Information Ready to join a strong, growing team? Look no further! Looking for a master tech/A tech to join our team. Opportunity to be lead technican and work with the shop foreman. New service facility coming soon. Benefits available after new hire period. 5 day work week. Saturday availability required as needed. Experience with Hyundai/Genesis/Kia preferred, but not required. Manufacter training provided. Bring your own certifications! Manufacturer technical equivalency programs available for technicians with ASE certifications, secondary education, or other manufacturer certifications!* Employment Position: Full Time Salary: $35.00 - $45.00 Hourly Salary is negotiable. Zip Code: 35203 Hyundai Technical Training Equivalency Assessment Program Hyundai welcomes experienced technicians from other OEMs. The program allows technicians with training from an industry-recognized source, other than Hyundai, to test out of certain Hyundai instructor-led technical training courses, provided they meet certain requirements.

At STERIS, we help our Customers create a healthier and safer world by providing innovative healthcare and life science product and service solutions around the globe. As a Tech 2 you will be responsible for troubleshooting and repairing surgical devices. Qualified and experienced to perform all repairs as a Surgical Device Repair Technician I. In addition, performs repairs on complex categories of surgical devices. All repairs completed to the highest quality standards and in a timely manner. What you will do as a Tech 2 Abides by all Company safety, health policies, and procedures. Uses personal protective equipment, as required. Completes Safety observations per site requirements. Services, restores and repairs surgical devices/instruments and equipment to specifications. Identifies problems within the job role and uses standardized and varied testing procedures; examines and tests mechanisms for defects. Replaces or repairs defective parts. Reassembles surgical devices or equipment and tests assembly for conformance to specifications. Orders routine repair parts. Request parts from stock room. Trouble-shoots in area of surgical device/instrument responsibility of role. Participates in the development of setting standard work instruction (SWI's). Participates in repair to inform validation of work instruction. May perform inventory transactions in current role. May perform estimation of repair, as necessary. May train other technicians in On-The-Job Training programs. Conforms to Company ISO goals and objectives and supports ISO requirements. Completes workplace (5S) organization audits per site requirements and leads the Metrics Board Meetings that focus on Safety, Quality, Delivery and Cost (SQDC). Skills Required High School Diploma or GED Successful in achieving Technician I training and promotional requirements Proven ability to perform more intermediate repairs on surgical devices and/or instrumentation. Proven ability to troubleshoot surgical devices commensurate with training and experience level. Must be able to meet flexible schedules with early/late hours and sometimes outside normal business hours including nights and weekends, based on Customer and business needs. Must be able to lift up to 25 pounds at times and push instrument carts ranging from 10-150 pounds at times. Specific Work Preferences Years of Experienced Preferred Vocational / Technical Degree preferred Certifications in technical training preferred. Good eye to hand coordination. Ability to assemble small parts. Attention to detail. Displays Positive Attitude and Confidence. Ability to understand repair concepts and follow sequencing or repairs. Competent in role based on the Skills Matrix. Demonstrates ability to determine correct spare parts required to complete a repair. If parts are controlled by inventory numbers, the technician knows and understands parts requisition procedures necessary for repairs in role. What STERIS Offers We value our employees and are committed to providing a comprehensive benefits package that supports your health, well-being, and financial future. Here is just a brief overview of what we offer: Market competitive pay plus quarterly bonus Flexible Time Off + 9 Corporate Holidays Per Year Excellent Healthcare, Dental, and Vision Benefits Healthcare and Dependent Flexible Spending Accounts Long/Short Term Disability Coverage 401(k) with a Company Match Parental Leave Tuition Reimbursement Program Additional Add-On Benefits/Discounts Pay rate for this opportunity is $[INSERT]. [ACTION REQUIRED - REMOVE IF NOT APPLICABLE:] This position is eligible for bonus participation. Minimum pay rates offered will comply with county/city minimums, if higher than range listed. Pay rates are based on a number of factors, including but not limited to local labor market costs, years of relevant experience, education, professional certifications, foreign language fluency, etc. STERIS offers a comprehensive and competitive benefits portfolio. Click here for a complete list of benefits: STERIS Benefits Open until position is filled. STERIS is a leading global provider of products and services that support patient care with an emphasis on infection prevention. WE HELP OUR CUSTOMERS CREATE A HEALTHIER AND SAFER WORLD by providing innovative healthcare and life sciences products and services around the globe. For more information, visit *************** If you need assistance completing the application process, please call ****************. This contact information is for accommodation inquiries only and cannot be used to check application status. STERIS is an Equal Opportunity Employer. We are committed to equal employment opportunity to ensure that persons are recruited, hired, trained, transferred and promoted in all job groups regardless of race, color, religion, age, disability, national origin, citizenship status, military or veteran status, sex (including pregnancy, childbirth and related medical conditions), sexual orientation, gender identity, genetic information, and any other category protected by federal, state or local law. We are not only committed to this policy by our status as a federal government contractor, but also we are strongly bound by the principle of equal employment opportunity. The full affirmative action program, absent the data metrics required by § 60-741.44(k), shall be available to all employees and applicants for employment for inspection upon request. The program may be obtained at your location's HR Office during normal business hours.

We are seeking a dedicated Specialty Pharmacy Technician to join our team in a fulfillment setting, where you will play a crucial role in shipping specialty medications across the country. Responsibilities * Use multiple computer systems to obtain pharmacy orders, compare to orders received, and produce mailing labels. * Utilize the best method for product packing and shipping based on standard procedures, including type of packaging and unique conditions, such as refrigeration, to ensure safe and secure delivery. * Prepare manual prescription orders by verifying information, pulling appropriate prescription drugs from inventory, and completing necessary scanning and packaging. * Maintain various machines and equipment, such as IPD machines and auto packing machines. Essential Skills * Licensed Pharmacy Technician in AL. * Experience using multiple computer systems for order processing. * Experience in packing and shipping procedures, particularly with specialty medications. * Experience in maintaining pharmacy equipment. * High School Diploma/GED or equivalent work experience. Additional Skills & Qualifications * Certified Pharmacy Technician (CPhT) highly preferred. * Previous experience in pharmacy shipping is recommended. * Experience in a pharmacy tech role, including customer service, compounding, fulfillment, inventory, and pharmacy support. Work Environment This is a high-volume production environment in a specialty pharmacy setting, where you will work with a team of up to 10 members. Work hours are typically Monday through Friday, 9am-5pm, with a casual dress code. The role offers stability in a large organization with opportunities for growth and cross-training. Job Type & Location This is a Contract position based out of Birmingham, AL. Pay and Benefits The pay range for this position is $20.00 - $24.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: * Medical, dental & vision * Critical Illness, Accident, and Hospital * 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available * Life Insurance (Voluntary Life & AD&D for the employee and dependents) * Short and long-term disability * Health Spending Account (HSA) * Transportation benefits * Employee Assistance Program * Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Birmingham,AL. Application Deadline This position is anticipated to close on Dec 12, 2025. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

Acuren is currently recruiting for PAUT Technicians to support operations in Birmingham AL and surrounding areas. THIS WILL BE A CALLOUT/TRAVEL POSITION. Successful candidates must be able to travel up to 90% throughout Augusta GA and surrounding areas. (The environments will be Corn/Agricultural, Petro-Chem, Chemical, Pulp & Paper, Gas Plants, Refineries, Pipelines and Pharmaceuticals.) SIGN-ON BONUS AND RELOCATION ASSISTANCE AVAILABLE FOR QUALIFIED APPLICANTS. Responsibilities Conduct tests to ensure quality or detect discontinuities (defects) using NDT methods (METHOD/S) of inspection Establish techniques for proper examination of objects under inspection, ensuring strict adherence to safety regulations Apply testing criteria in accordance with applicable specifications or standards and evaluate results Identify, track, manage and mitigate risk on specific client engagements. Escalate these issues when necessary to ensure minimal impact to quality, budget, and timeline. Review asset documentation and operational data; including inspection data, monitoring, and auditing associated NDE activities. Complete integrity assessments including physical site walkdowns when required. Prepare project reports including description of work done, conclusion and recommendations. Perform specialized inspections Must have experience developing techniques for approval by customer certifying agents. May instruct and supervise others. Other work duties as assigned. Extensive knowledge of ASME and API requirements and procedures pertaining to the evaluation of applicable equipment for continued serviceability. Knowledge of industry health and safety policies and procedures. Capable of interfacing with customers regarding schedules and problem solving. Ability to use applicable software and computer related equipment. Requirements High School Diploma or equivalent Some college preferred Technical background in NDT (METHOD/S; UT, UTPA, PAUT, CR, DR, etc.) and procedures with five years experience. Current NDT certifications in (METHOD/S; UT, UTPA, PAUT, CR, DR, etc.) required. Supervisory experience is a plus. Demonstrated ability to effectively perform assigned NDT tasks and interpret results of inspections Knowledge of NDT equipment Benefits Competitive salary Medical, dental, vision, and supplemental insurance 401K Plan Paid Holidays Paid Time Off Working Conditions Outside environment with continuous physical effort, exposure to 5-7 elements/conditions, moderate mental effort, and occasional requests for assistance. Travel may be required. Physical Job Requirements & Demands: Lifting/carrying by weight (50 pounds) frequently may be equired. Mobility such as reaching, kneeling/crawling, bending/crouching, and frequency/duration in which action is required. Endurance such as sitting, standing, walking, climbing, or driving, and frequency/duration in which action is required. Company Overview Acuren is a trusted, single source provider of technology-enabled asset protection solutions used to evaluate the structural integrity of critical energy, industrial and public infrastructures. Committed to delivering a Higher Level of Reliability , Acuren provides an unrivaled spectrum of capabilities including inspection, traditional and advanced NDE/NDT, failure analysis, rope access, materials engineering, field engineering, reliability engineering, drones, robotics, V-Deck and condition-based monitoring services. Our work is critical to the integrity and safety of industrial firms, including petroleum refinery, pipeline, power generation, pulp & paper, mining, pharmaceutical, aerospace and automotive industries. Acuren employs over 4,000 dedicated professionals supporting the mechanical integrity and inspection programs of the world's largest industrial segments. Acuren is a market leader. Our formula for success is straightforward: be capable locally, with certified and well-equipped personnel supported by trained, experienced leaders. Continuing to build on a strong heritage of safety, quality and professionalism, Acuren strives to maintain incident free work environments, pursues advanced technical developments, and supports reliability programs that are valued by clients and employees. #LI-BE1

An Ultrasonic Technician is responsible for calibrating and operating various ultrasonic testing systems for the purpose of inspecting the electric resistance weld of steel pipe to the applicable standard. They also perform general inspections on Steel Pipe products in order to identify pipe manufacturing quality issues and communicates with production and quality personnel regarding these findings. Ideal Candidate * Prior ultrasonic testing experience. * Prior experience as a Quality Assurance Inspector or Lab Technician Mechanical Testing within a manufacturing environment. * Has successfully completed Ultrasonic Level I and Level II course work and can provide documented evidence of completion. * Possessed one or more of the following Ultrasonic Level II certifications: Visual Testing, Magnetic Particle, Liquid Penetrant, Radiography. * Holds or has held documented evidence of an Ultrasonic Shear Wave Level II Certification. Additional Job Duties * Administers Magnetic particle tests areas indicated by the ultrasonic systems, as deemed necessary, and magnetic particle inspects the outer surface weld seam as required. * Performs visual inspection of pipe Outer Diameter, Inner Diameter, and bevels for specification conformity. Performs dimensional checks on pipe such as straightness, ovality, wall thickness, squareness, etc. * Detects all discontinuities in weld. * Determines the acceptance or rejection based on evaluation of signal response to applicable standards. * Selects and identifies pipe for lab testing, as well as samples to be cut and broken or polished for continuing metallographic study of product quality. Operates Plasma torch and Hydraulic press. * Verifies pipe identity and keeps a permanent record, written or electronic, of defects and the final disposition of pipe through data entry within the Manufacturing Execution System. * Verifies NDT system calibration. * Be very familiar with the products and processes that are being used in order to explain ultrasonic inspection to customers. * Watches for deformation of pipe occurring during hydrostatic testing, as required. * Performs final line inspection and preliminary mill line inspection, as required, during normal production and performs other duties, as necessitated or directed, depending on shop conditions. Minimum Qualifications: * Must have successfully performed the job of Quality Assurance Inspector or Lab Technician Mechanical Testing (or similar job within a manufacturing environment). * Must be capable of completing ASNT-TC-1A test and requirements for Level II ultrasonic testing, Magnetic Particle testing, and Level II visual testing within 2 years of being on the job. * Must exhibit a high school diploma or equivalent. * Must exhibit a tolerance for stress, the ability to manage multiple tasks, work independently, and meet deadlines under a dynamic work schedule. The nature of this position requires performing job duties with numerous interruptions. * Must exhibit the ability to read and write legibly. Must exhibit the ability to communicate in a courteous, polite, and effective manner, both verbally and in written format. * Must exhibit good interpersonal skills and the ability to interact with persons of different socio-economic, cultural, and educational backgrounds. Must exhibit the ability to cooperate well with other individuals and establish and maintain effective working relationships. * Must exhibit the ability to read and interpret basic requirements for projects, such as manufacturing control forms, product specifications, etc. * Must exhibit the ability to understand and accurately use basic math involving additional, subtraction, multiplication, including fractions and decimals. * Must exhibit basic computer skills. * Must exhibit the ability to read and interpret measuring instruments, such as measuring tapes, rulers, calipers, gauges, dial indicators, and micrometers. * Must exhibit a valid state issued driver's license. Other Preferred Qualifications: * College or technical school coursework in science or engineering. Proof of education required. A transcript or diploma would be acceptable and must be provided. * Good mechanical aptitude. * Electronic skills. Benefits: * Paid Vacation and Holidays * Profit Sharing Bonus Plan (Employee-Owned Company) * Medical, Dental and Supplemental Vision * Generous 401k and Savings Plan (company match) * Wellness Program * Tuition Reimbursement * Employee Assistance Program About AMERICAN Founded in Birmingham, Alabama in 1905, AMERICAN is a manufacturer of fire hydrants, valves, ductile iron and spiral-welded steel pipe for the waterworks industry, and high-frequency-welded steel pipe for the oil and natural gas industries. AMERICAN's diversified product line also includes fire pumps, structural casing and piling, castings for waterworks products and large machinery, and specialty rubber products. For more than a century, AMERICAN has been committed to doing things The Right Way by applying the Golden Rule in life and in business, always exceeding customer expectations, by empowering and supporting our team members, and by being a good neighbor in our communities. EOE/VETS/DISABILITY

Labcorp is seeking a dedicated and motivated individual to join their Maintenance/Facilities team in Birmingham, AL. The HVACR Technician will be responsible for maintaining and repairing heating, ventilation, air conditioning, and refrigeration systems in commercial buildings. They are responsible for ensuring that these systems function properly, providing comfortable and safe indoor environments. Work Schedule: Monday - Friday 8:00am - 5:00pm, With rotating evenings and weekends for on-call purposes Benefits: Employees regularly scheduled to work 20 or more hours per week are eligible for comprehensive benefits including: Medical, Dental, Vision, Life, STD/LTD, 401(k), Paid Time Off (PTO) or Flexible Time Off (FTO), Tuition Reimbursement and Employee Stock Purchase Plan. Casual, PRN & Part Time employees regularly scheduled to work less than 20 hours are eligible to participate in the 401(k) Plan only. For more detailed information, please click here. Job Responsibilities Perform maintenance, diagnose and repair problems, and coordinate with outside contract vendors Assist in the maintenance of building MEP systems in a large medical laboratory Work with various MEP systems including VRF systems, air handlers, cooling towers, chillers, lower pressure boilers, humidifiers, VAV systems, air compressors, pumps, motors, exhaust fans, and refrigeration devices Monitoring the Building Management System on a daily basis alerting management of any discrepancies Perform daily rounds to check process gases, compressed air systems, DI Water Systems, and Lab Waste Systems Read & interpret intrepid shop drawings & control schematics Update excel spread sheets, generate word documents and managing daily emails. Participate in annual safety training and earn required certifications for the position Assist with storm weather preparation and severe weather conditions along with other trades as needed. Travel to other sites when requested by management Requirements High School Diploma or equivalent Relevant degree from a trade school is preferred Prior experience in a similar HVAC position; 3 years is preferred EPA certified Universal technician required BAS and CMMS systems knowledge Strong working knowledge of electrical, mechanical and plumbing systems Strong computer and data entry skills Excellent communication skills; both written and oral Ability to work independently as well as in a team environment Flexibly to travel to other locations within the region Possess a valid driver's license Ability to lift 50lbs If you're looking for a career that offers opportunities for growth, continual development, professional challenge and the chance to make a real difference, apply today! Labcorp is proud to be an Equal Opportunity Employer: Labcorp strives for inclusion and belonging in the workforce and does not tolerate harassment or discrimination of any kind. We make employment decisions based on the needs of our business and the qualifications and merit of the individual. Qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex (including pregnancy, childbirth, or related medical conditions), family or parental status, marital, civil union or domestic partnership status, sexual orientation, gender identity, gender expression, personal appearance, age, veteran status, disability, genetic information, or any other legally protected characteristic. Additionally, all qualified applicants with arrest or conviction records will be considered for employment in accordance with applicable law. We encourage all to apply If you are an individual with a disability who needs assistance using our online tools to search and apply for jobs, or needs an accommodation, please visit our accessibility site or contact us at Labcorp Accessibility. For more information about how we collect and store your personal data, please see our Privacy Statement.

Job Summary: We are looking for a Service Technician to join our growing team! The right candidate will have a strong service technician background and ASE certified. The day-to-day duties include performing work on specific repair orders and diagnosing what repairs need to be done. Benefits Competitive pay Medical, dental, and vision insurance Life insurance 401k PTO Employee discounts Career growth opportunities Responsibilities Perform work specified on the repair order with efficiency and in accordance with dealership Test-drive vehicles, and test components and systems, using diagnostic tools and special service equipment Diagnose, maintain, and repair vehicle automotive systems including engine, transmission, electrical steering, suspension, brakes, air conditioning, etc. Communicate directly with the Service Advisor so that customers are informed if any additional service is needed. Provide an estimate of time needed for additional repairs Execute repairs under warranty to manufacturer specifications Qualifications 2+ years of Service Technician experience preferred High school diploma or equivalent, ASE Certification required B level qualifications, including Diagnostic, Electrical and Engine Repair Dexterity, requiring a steady hand, excellent hand-eye coordination Mechanical and troubleshooting skills and ability to operate electronic diagnostic equipment Excellent customer service skills and basic computer competencies Positive, friendly attitude, along with an eagerness to improve Enjoy working in a dynamic environment Teammate with ability to collaborate with others effectively Ability to learn new technology, repair and service procedures and specifications Valid driver's license and clean driving record About Us: Headquartered in Birmingham, Alabama, Serra Automotive Group is one of the Top 150 automotive dealer groups in the nation. We are proud to represent the world's best automotive brands through our locations across Central Alabama and Michigan. Our mission is to provide everyone with a better automotive buying and ownership experience, and we are always looking for the right team members to help us make that possible! We are an equal opportunity employer and prohibit discrimination/harassment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job Details Division: Nucor Tubular Products - South Other Available Locations: N/A More Information: Nucor | Nucor Technical Academy Applications will be accepted until December 31, 2025. This job posting could close earlier if all open positions are filled.Basic Job Functions: The Nucor Technical Academy is a training program designed to teach electrical maintenance fundamentals and to train a person with a high school diploma (or GED) to the level of a maintenance electrician within a two-year (27 month) training period. The training program is a compilation of education, culture, ideas and current training programs that exist throughout Nucor. This training provides the necessary classroom instruction and includes structured hands-on training to ensure the person is prepared to enter the workforce as a Maintenance Electrician. Responsibilities will include hands-on assignments working with experienced Nucor Maintenance Team Members. * Note: The Nucor Technical Academy is located and administered at Nucor Steel Tuscaloosa, Inc. in Tuscaloosa, Alabama. Selected candidates will begin academic coursework online and participate in limited on-the-job training at their sponsoring Nucor division in the first summer and initial fall. Candidates will relocate to Tuscaloosa before the initial spring semester where they will remain for five continuous semesters. While in Tuscaloosa, candidates will take technical courses and participate in on-the-job training at Nucor Steel Tuscaloosa. Selected candidates will have opportunities to return to sponsoring divisions in between semesters until graduation. Safety is the most important part of all jobs within Nucor; therefore, candidates must be able to demonstrate the ability to initiate, lead, and uphold safety policies, practices, procedures, and housekeeping standards at all times.Training Program Requirements: Current high school transcript (2.75 GPA preferred). Including the first semester of your senior year in High School. ACT, SAT, or Accuplacer scores: upload to application packet if available and if not available, candidate must provide before interview. One-page essay explaining how your work history, activities, or other interests make you a good candidate for this training program. Include your career or educational goals. Willingness Questionnaire (the questions are listed here after you click "Apply Now.") Interested candidates must also complete a separate application to Shelton State Community College in Tuscaloosa, Alabama. Steps to Apply: Apply online to Shelton State Community College for entry in the summer semester of next year (do not select other semesters). ************************************************** aid/becoming-a-student/ AFTER YOU HAVE APPLIED TO SHELTON STATE COMMUNITY COLLEGE AND RECEIVED YOUR SSID (SHELTON STATE ID NUMBER), YOU WILL CONTINUE WITH THE FOLLOWING STEPS. Apply online to Nucor Technical Academy by going to ************************ search by location or by job title, find applicable position, and then click "Apply Now." Include Student Information Sheet, available online at: ***************************************** Include chronological resume Include transcript with SAT/ACT or Accuplacer Include a one-page essay STUDENT INFORMATION SHEET, RESUME, TRANSCRIPTS WITH ACT/SAT/ACCUPLACER SCORES, AND ONE-PAGE ESSAY MUST BE UPLOADED FOR YOUR APPLICATION TO BE CONSIDERED COMPLETE. ALL APPLICATION STEPS MUST BE COMPLETED BY DECEMBER 31ST, 2025 Posting could be closed earlier if all open positions are filled. Contact Jimmy Gillespie (*************************) if you have questions. Nucor is an Equal Opportunity/Affirmative Action Employer - M/F/Disabled/Vets - and a drug - free workplace

Benefits Start Day 1 for Full-Time Colleagues - No Waiting Period! For more information about our benefits, see below! We are proud to be a member of the Rentokil family of companies, the global leader in Pest Control and other services across more than 90 countries. We pride ourselves on being a trusted partner to many of the world's leading brands and serve consumer and business customers across multiple industries. We are extremely proud of our legacy of excellence and constantly work to fulfill our mission to "protect people, enhance lives, and preserve the planet." What do our Innovation/Utility specialists do? The primary purpose of this role is to perform the dynamic combined aspects of pest control, exclusion services, minor construction, and TAP (Thermal Acoustical Pest) insulation installation allowing you to make a significant impact in the communities we serve. Responsibilities include but are not limited to the following: * Pest Control: Conduct inspections to identify pest activity, perform pest control services for residential and commercial clients, and install and maintain termite control systems * TAP Insulation Installation: Efficiently install Thermal Acoustical Pest Control (TAP) insulation, ensuring quality service and customer satisfaction while managing job-site preparations and clean-up * Construction and Repair: Assist with light construction projects, including minor repairs and replacements related to pest damage * Customer Interaction: Communicate effectively with customers to explain services, ensure satisfaction, and provide guidance on pest control measures * Service Delivery: Perform exclusion services and wildlife removal, setting up and building exclusion traps, and ensuring safety protocols are followed * Continuous Learning: Stay updated on industry trends, technologies, and regulations. Participate in training to enhance your skills in pest control and related services Essential Job Functions: * Working around animals, insects and termites * Working in tight, confined spaces such as basements, attics, crawl spaces, narrow aisles, or passageways * Setting up and building exclusion traps, cuts flashing and forms hardware cloth to specifications * Removing animals trapped in exclusion devices * Working in a safety harness from roof tops as needed in the performance of exclusion services and wildlife removal * Completing production forms documenting services provided * You'll sometimes be working around mechanical parts, vehicles, electrical current, heights and scaffolding, fumes, dust, and chemicals, and we'll train you how to handle all of these conditions safely * Move up to 50 pounds by lifting, carrying, pushing, pulling, or otherwise repositioning objects * Maintain balance when walking, standing, or crouching on narrow, slippery, or erratically moving surfaces * Push objects forward, downward, or outward with sustained force using the upper extremities to press with steady force and drag, draw, haul, or tug objects * Able to work both inside and outside in your local climate in company-provided weather * Lots of moving around - regularly sitting, climbing, balancing, stooping, kneeling, crouching, and crawling, up and down stairs, ladders, scaffolding, ramps, and poles * Ability to wear personal protective equipment (PPE), like an OSHA-compliant respirator * Safely operate a motor vehicle and make sure it and all other equipment is kept clean What do you need? * Clean shaven face- for safety reasons (rebreathers have to be able to seal your face) * High school diploma or GED; related experience and/or training; or equivalent combination of education and experience. * Possess a valid driver's license from state of residence * Available to work Monday-Friday and Saturdays as needed * Solid reading, writing, and verbal communication skills and the ability to present information in both internal and external settings. * Basic math skills - add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. You'll need to be able to follow instructions for mixing on product labels. * Licenses/certificates as required by federal, state, and/or local regulations (covered by us) * Customer-facing experience preferred #ZipRTX Why Choose Us? A career with the Rentokil family of companies can be a professional trajectory filled with opportunity. We pride ourselves on being a world-class team that rewards high performance, and we love to promote from within. We offer competitive pay and many of our roles offer performance incentives. Below you'll find information about some of what we have to offer. All Full-Time Colleagues qualify for the following and Part-Time Colleagues qualify for most benefits after they meet certain criteria. Click here to read more about our Total Rewards Program which includes: Professional and Personal Growth * Multiple avenues to grow your career * Training and development programs available * Tuition Reimbursement benefits (for FT Colleagues) Health and Wellness * Full-time colleagues are eligible to begin enrollment immediately upon hire with benefits starting on day 1 * Health benefits including Medical, Dental, Vision, Disability, and Life Insurance plus much more Savings and Retirement * 401(k) retirement plan with company-matching contributions Work-Life Balance * Vacation days & sick days * Company-paid holidays & floating holidays * A company mindset that prioritizes health, safety, and flexibility We are looking for individuals who want to make a difference where our customers live and work. Is that you? This company is a Drug Free workplace. Rentokil is committed to complying with all Federal, State, and local laws related to the employment of qualified individuals with disabilities. California residents click here to review your privacy rights. It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. By applying to this job, you agree to receive initial texts from systems used on behalf of Rentokil North America, Inc., possibly including Workday, Loop, and HireVue. These systems utilize text messages to communicate with you throughout the application, interview, and pre-hire processes. You can set your communication preferences or opt out of text messages from each system at any time following the initial message. Message and data rates may apply.

Shapes Technician/Production. Allied Mineral Products, Inc. is a leading manufacturer of monolithic refractories worldwide, headquarters in Columbus, Ohio. Due to our continued growth we are looking for technicians in our Shapes department to work: 1st shift Mon - Fri 6:00 am - 2:30 pm Pay: $18.20 - $25.73 We are looking for energetic, motivated and results-driven individuals to join our Team. Minimum Qualifications: * Strong work ethic * Dependable and able to follow instructions * Great attention to details * Ability to read/use a tape measure * Ability to evaluate 3D shape against written specifications * Good math skills * Ability to routinely lift 50+ lbs. * Must be able to read, speak and write English * Outstanding Attendance * Production or Forklift experience a plus * Must be at least 18 years old Allied offers: * Competitive wages * Health Insurance: medical, vision, dental, and STD, LTD. Company contribution to a Health Savings Account. * Employee Stock Ownership Plan (ESOP), 401K, profit sharing, and other. * Tobacco free environment * Tuition reimbursement * Onsite fitness facility * Family/Company events * Vacation, holidays, and personal time off paid. Allied Mineral Products offers competitive wages, health, dental, STD, LTD and ESOP retirement plan and profit sharing. The ability to pass a drug screen and physical (to wear a respirator) is required prior to starting work should an offer be made. Allied Mineral Products Holding, Inc. is an Equal Opportunity Employer/Veterans/Disabled.

McSweeney Chevrolet GMC/CDJR is seeking an experienced and skilled Chrysler Technician to join our team in Clanton, Alabama. This is a full-time role in the auto industry. As a Chrysler Technician, you will be responsible for diagnosing, repairing, and maintaining Chrysler vehicles for our customers. We are looking for someone with a strong work ethic, attention to detail, and a passion for delivering exceptional service to our customers. Compensation & Benefits: • Competitive salary based on experience • Comprehensive benefits package including medical, dental, and vision insurance • 401k retirement plan • Paid time off and holidays • Opportunities for career advancement and training programs Responsibilities: • Perform routine maintenance tasks such as oil changes, tire rotations, and fluid checks • Diagnose and repair complex issues with Chrysler vehicles • Utilize diagnostic equipment and technical manuals to troubleshoot and identify vehicle issues • Provide accurate and timely estimates for repair work • Keep detailed records of all work performed and parts used • Communicate effectively with service advisors and customers regarding the status of their vehicle • Maintain a clean and organized work area • Adhere to safety protocols and guidelines at all times Requirements: • High School Diploma or equivalent • Chrysler certification and/or strong experience with Chrysler vehicles • Valid driver's license and clean driving record • Ability to follow instructions and work independently • Excellent problem-solving and time-management skills • Strong attention to detail and accuracy • Physical ability to stand, bend, and lift up to 50 pounds • Willingness to continue education and training to stay up-to-date with advancements in the industry EEOC Statement: McSweeney Chevrolet GMC/CDJR is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law.

We're looking for paintless dent repair technicians with a minimum of 5 years of professional automotive PDR experience to join us at Carvana - the fastest-growing used automotive retailer in U.S. history, and one of the four fastest companies to make the Fortune 500. As an Experienced PDR Technician, you'll be expected to use advanced glue-pulling techniques, hail repair, repair creases and body lines, and repair larger-sized dents on both steel and aluminum vehicle panels. At Carvana, you'll receive a competitive wage and amazing perks - including a 401(k) with Carvana match and even a vehicle purchase discount - all while using state of the art tools in one of our high-tech Inspection Centers ( click here to learn more). If you're joining us in an entry-level position, we offer training programs to make sure your skills and pay progress along with the company. Other perks of the Job 100% company-paid healthcare premiums Generous paid-time off and your birthday is a holiday! ASE and tool reimbursement programs Tuition reimbursement and student loan repayment How To Get Started Join the Carvana team by applying on this page, or call one of our recruiters by phone at (888) ###-####, Monday through Friday, between 6 AM and 4 PM PT (9AM to 7PM ET). We also have a variety of other automotive roles available in one of our 18 locations across the country - take a look at our Careers site to apply for one of the following roles: Auto Body roles: Paint, Prep/Body work, Wheel Repair, Airbrush, Interior Repair, Glass Repair, and PDR (Paintless Dent Repair) roles Auto Technician/Mechanic roles: Lube and Oil, Inspection, Brake and Tire, Mechanical Repair / Build, and Master Technician roles Entry-Level roles: Detailing, Inventory Associate (Car Porters), Photo, Parts Associate, Inspection, and Coordinator/Administrator roles General qualifications and requirements Ability to physically operate vehicle equipment and tools - must be able to lift up to 60 pounds independently Must be at least 18 years of age and possess a valid driver's license. Some positions may be subject to an Motor Vehicle Records (MVR) check An ability to work in a fast-paced, ever-changing production environment while sometimes being exposed to excessive weather conditions (heat/cold) Use of safety equipment that may include but not limited to face shield or goggles, non-slip shoes, gloves, mask, and other protective garments and equipment About Carvana At Carvana, we sell cars but we aren't car salesmen. Our promise is simple: we won't sell a car to a customer that we wouldn't sell to our own Mom. Period. To make sure our cars are in first-rate condition, we've built multiple vehicle Reconditioning Centers around the country, where our cars are inspected, perfected, and photographed before reaching the Carvana website. Think you've got what it takes to join our team? Apply today! Carvana is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. Carvana also prohibits harassment of applicants or employees based on any of these protected categories. Hiring is contingent on passing a complete background check. This role is not eligible for visa sponsorship. Must be at least 18 years of age and possess a valid driver's license. Must be able to read, write, speak and understand English.

CUI Cable is seeking a skilled and dedicated Cable Technician to join our team. As a Cable Technician, you will be responsible for providing exceptional installation, relocation, troubleshooting, and auditing services for internet, cable, telephone, and alarm systems at our customers' premises. Cable experience is a requirement for this position, and we will provide you with a work truck to carry out your duties effectively. Responsibilities: Perform installations, relocations, troubleshooting, and audits of internet, cable, telephone, and alarm services at customer premises. Adhere to company installation policies to ensure high-quality service delivery. Operate and maintain tools and equipment properly, organizing and stocking the company vehicle with necessary equipment to fulfill job requirements. Prepare and maintain accurate time logs, reports, and related documentation in accordance with company and departmental policies. Requirements: Proficiency in using basic broadband installation tools and hand tools. Ability to lift objects weighing up to 80 lbs., work at heights up to 30 ft., and in confined spaces, including attics. Comfortable working both indoors and outdoors, adapting to different environments as necessary. Possession of a valid driver's license and a satisfactory driving record. Successful completion of thorough background checks and drug screenings. Flexibility in work schedule, including availability to work weekends. Minimum age requirement of 23 years or older. Employee Compensation and Benefits: At CUI, we prioritize your preferences and offer a range of options to suit your needs. We provide both W2 and 1099 employee options with competitive wages, ensuring your success and satisfaction. As part of our commitment to your professional growth, we promote from within and offer advancement opportunities throughout your career journey. Additionally, we offer an attractive list of benefits: Sign on Bonus: $500 - $1,500 dependent on amount of training needed Comprehensive benefit package, including health, vision, and dental coverage. 401k retirement plan with a company match. Company vehicle and gas card for work-related transportation. Weekly pay schedule. Monthly bonus potential. Pay increase after the first year. Paid holidays. Uniforms provided. Company cell phone. Optional Benefits Waived Program: If you own a late model white truck/van and do not require medical benefits, you may be eligible for our Benefits Waived program. Speak with a recruiter for more details. About CUI Cable Services: CUI Cable Services is a leading provider of solutions for multiple system operators (MSOs) in the telecommunications industry. Since 2001, we have been delivering exceptional services, exceeding industry standards. As a registered minority-owned and veteran-owned business, we pride ourselves on practicing our Core 4 values of Honesty, Integrity, Teamwork, and Quality. These values shape our company's culture, drive our decisions, and inspire us to continuously improve and provide the best possible experience for our employees, customers, and partners. Hiring Process: Our efficient hiring process ensures a smooth transition into your future career. Here are the steps involved: Application review and phone screening: Our recruiters will review your application and conduct a phone screen to discuss the job description and your work experience. In-person interview: If selected, you will be invited for an in-person interview with our branch managers. Pre-employment screening: Upon accepting the job offer, you will undergo a pre-employment drug screening and a nationwide background check. Start date: After successful completion of the screening process, we will coordinate your start date. If you are looking to start your career in the cable industry, join the CUI team and become part of our dedicated workforce. Apply today and embark on a rewarding journey with opportunities for professional advancement and personal fulfillment. Join our team at CUI Cable Services and embark on a rewarding career in the telecommunications industry.