Assembler jobs in Houston, TX - 172 jobs

KEY JOB RESPONSIBILITIES: Perform manual processes to complete mechanical and electrical assemblies and sub-assemblies, using hand, electric and pneumatic tooling. Reports defective material or questionable conditions to the department supervisor. Maintain the work area and equipment in a clean and orderly condition and follows prescribed safety regulations. Complete tasks as directed by manufacturing schedule with minimum supervision Other duties as directed by supervisor. JOB SKILLS Ability to establish methods and procedures Familiarity with assembly and measuring tools, interpretation of visual aids and ability to perform simple shop math. Good command of the English language, both written and verbal is required. Competency in reading and interpreting engineered drawings, schematics or other technical documents. EDUCATION & TRAINING High school diploma MINIMUM REQUIREMENTS: Minimum three months of related factory experience for Level 1 position. PHYSICAL REQUIREMENTS/WORK ENVIRONMENT: Work performed in a shop environment; Exposed to any number of elements but with none present to the extent of being disagreeable; May work at different workstations as production needs require, or shifts from one station to another, during the assembly process; Physical effort equal to frequent moving of up to 50lbs materials; Regularly required to sit or stand, bend and reach; The use of Safety Glasses is required; The use of earplugs is recommended; Ability to stand up to 10 hours a day (with a lunch in between) and up to 6 days a week; Ability to work in a non-air-conditioned environment. Steel-toe boots required in Manufacturing Facility Specific Duties are Assigned According to Skill Level Demonstrated as follows: Electrical Assembler 1 Be able to perform conduit wiring Piping and support fabrication Pull wiring Ability identify and install basic electrical commodity components Electrical Assembler 2 All of the requirements of Level 1, plus: LV wiring + termination MV wiring + termination 2-5 years of demonstrated electrical assembly experience Ability to work autonomously or with limited supervision Electrical Assembler 3 All of the requirements of Level 1 & 2, plus: Control wiring and MCC wiring 5+ years of demonstrated electrical assembly experience

Job DescriptionJob SummaryAssembles bolts and nuts at designated bolt assembly table, packages bolt orders, over taps nuts, and pulls nuts between departments. May pull bolt orders and deliver material within departments. Job Duties and Responsibilities Receives bolt orders. Retrieves appropriate bolt material from storage location(s). Assembles bolts and nuts using the Bolt Assembly table. Setup over tap machine to over tap nuts. Packages bolts to prevent damage during normal handling. Lists completed bolt orders in logbook. Delivers materials to proper personnel/storage location. Performs physical count of bolt material for inventory. Must have clear understanding and practice all safety rules and regulations. Must have clear understanding of Quality Policy and Quality System Programs. Maintains a clean and organized workstation. May perform other duties as assigned by lead or supervisor. Job Specifications Skills Excellent verbal and written communication skills. Ability to read and interpret instructions and detailed manufacturing procedures. Ability to understand and read measuring tools such as tape measurer and/or ruler. Education Required: High school diploma or equivalent. Work Experience No prior work experience required, but experience in a warehouse / manufacturing setting is preferred. Physical Requirements Must be able to lift fifty pounds independently. Ability to lift, climb, bend, stoop, push and pull. Continuous standing and/or walking. Moderate physical effort- working frequently with average weights of ten to fifty pounds or continuously with lighter weights. Good eye/hand/foot coordination Ability to work in cold, hot and/or dusty environment, with noisy conditions and occasionally outside in the elements. Powered by JazzHR TTaMdVhs8s

Working at Freudenberg: We will wow your world! Responsibilities: Assemble all filters based on a daily schedule. Ensure quality of product they are making meets standards set out by the supervisor and lead. Clean the surrounding area at the end of the shift. Quality check to make sure the correct product is being used. Qualifications: Knowledge of the proper material used to make filters that are scheduled The Freudenberg Group is an equal opportunity employer that is committed to diversity and inclusion. Employment opportunities are available to all applicants and associates without regard to race, color, religion, creed, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity or expression, national origin, ancestry, age, mental or physical disability, genetic information, marital status, familial status, sexual orientation, protected military or veteran status, or any other characteristic protected by applicable law. Freudenberg Residential Filtration Technologies Inc.

SEC Energy is a single-source provider of natural gas compression equipment, parts and services to all segments of the oil & gas industry. From 50 to 8,000 horsepower, gas, electric or dual drive, SEC is capable of designing and fabricating equipment to meet each customer's specific operating requirements. SEC also provides production, processing, and treating equipment, and an expansive network of warehouses that service locations across the United States. SEC capabilities expand beyond tradition manufacturing to further include turnkey engineering services, truck-based service technicians, manufacturer parts, and power generation equipment. Essential Duties & Responsibilities: Reads shop notes, general arrangement and process flow diagrams and drawings. Reads measuring devices such as tape measures, rulers and pressure gauges. Assembles and installs skid mounted components such as pumps, vessels, pipe, pipe supports, structural supports, belts, pulleys and machine guards. Performs pneumatic and mechanical tests on assembled components. Disassembles components to replace defective parts or to prepare them for shipping. Operates a variety of portable hand, electric and air powered tools such as impact wrenches, torque wrenches, combination wrenches, sockets, ratchets, band saw and grinders. Operates stationary tools such as bench grinder, iron worker, drill press and chop saw. Operates lifting equipment such as overhead cranes and jib cranes. Records serial numbers and other information as required in ITP (inspection test plan). Reports problems to line supervisor and actively participates in resolution. Perform job duties in a safe manner and according to company safety procedures. Reports potentially unsafe equipment and safety hazards to supervisor for immediate resolution. Understands and follows oral and written instructions. Establish and maintain effective working relationships with all departments and workers. Actively participates in the development of Assembler I and other employees. Performs the above and other duties as required with minimal supervision. Equal Opportunity Employer/Minority/Female/Disabled/Veteran The nature and frequency of the above working conditions and requirements may vary depending on individual operational circumstances. Where feasible, the Partnership will make reasonable accommodations to qualified individuals with disabilities to enable them to perform the essential functions of the job. DISCLAIMER\: The above statements, which are subject to change, are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all responsibilities, duties and skills required of personnel so classified. Required education or minimum level: High school education (GED) Experience: 0-2 Years experience in compression related assembly or field environment. Skills: Mechanical aptitude. Ability to read tape measures and rulers in increments of 1/16” Basic mathematic ability to add and subtract fractions, decimals and whole numbers. Must have basic knowledge of commonly-used concepts, practices, and procedures within the assembly department. Working Conditions: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Lifting up to 50 lbs. occasionally Walking and standing frequently Exposure to adverse weather, cramped conditions and some heavy lifting Works in industrial/manufacturing settings, which may include exposure to various materials and chemicals, as well as extreme temperature conditions and loud machinery, and require appropriate personal protective equipment

Powell is an engineered to order manufacturer of switchgear and electrical equipment for the power generation industry. An Assembler II is responsible for putting together components or parts to create finished products. Four 10s Schedule: Monday-Thursday 4:30am-3:00pm. Position Summary An Assembler II is responsible for putting together components or parts to create finished products. They follow blueprints, work instructions, or diagrams to assemble products using various tools and equipment. Assemblers may work in manufacturing or production environments and may be required to perform quality checks and ensure that products meet specifications. They may also be responsible for maintaining a clean and organized work area and reporting any issues or defects to supervisors. Attention to detail, manual dexterity, and the ability to work as part of a team are important skills for an Assembler. Supervision None Essential Responsibilities •Build and assemble mechanical components for Switchgear and/or Breaker units according to engineering drawings and customer specifications using master copy, spec sheet, front elevation and WO files •Perform maintenance and proper use of tools. •Perform in process inspections; ensure quality by following standard work instructions and identifying any potential risks to product quality. •Perform all ship prep functions including splitting gear. •Assist in Root Cause Analysis on engineering changes and correct discrepancies •Assist a small team of employees to complete a specific task assigned as assigned by lead assembler and/or supervisor •Perform mechanical adjustments for switchgear •Promote a safety culture as well as attend all safety meetings. •Ensure that work areas remain clean and well organized. Minimum Qualifications •Minimum education level of a High School Diploma or General Education Equivalent Diploma is preferred. •2-4 years of experience in assembling medium to large sized metal boxes/enclosures or electrical switchgear •Ability to read a tape measure (including conversions from fraction to decimal and conversely from decimal to fraction and metric to imperial). •Must have a basic command of the English language, both written and verbal. •Basic knowledge of operating desktop computer. •Safely use variety of hand/power tools. •Lift up to 50lbs using proper lifting techniques. Preferred Qualifications •Basic MES system knowledge, Oracle preferred. Skills, Abilities & Other Requirements •Read and understand spec sheets and follow proper use of hardware by spec requirements. •Able to read and understand single and three-line drawings, including symbols •Able to interpret and execute change orders •Able to identify part discrepancies and properly write HFDs for corrections •Knowledge of mechanical drawings and designs •Ability to follow direction from Senior Assemblers and Lead Assemblers. •Effectively demonstrates on-time delivery and the ability to stay focused on goals and responsibilities. •Self-starter with ability to take on multiple tasks with a drive to succeed. •Challenges the status quo; looks for better or more efficient ways to get results. •Ability to adapt to new ideas, technology, processes or product changes. •Believes and displays through actions that our customers represent our current success and remain vital to our future growth. •Demonstrates integrity and ethical decision making. •Conscientious, thorough, accurate, and reliable when performing and completing job tasks. •Able to work effectively within your team and around other departments and their activities. •Ability to learn and adhere to all manufacturing policies and practices to ensure adherence to ISO requirements. Working & Environmental Conditions Working Conditions · Safety sensitive position in a temperature-controlled manufacturing or industrial environment with occasional outside activities. · Required to wear personal protective equipment (PPE) (i.e., safety shoes, hard hats, bump caps, safety glasses, hearing protection, safety harnesses as required) and respirators when required. · Must be able to work from all type of ladders (step ladders, "A" frame ladders, etc.) · Working at heights usually no higher than 20 feet in the air on an elevated structure using proper lift equipment and Fall Protection Equipment. Physical Requirements · Able to maintain body equilibrium and agility to prevent falling when walking, standing, crouching, ascending or descending stairs or step ladders · Bending the body at the waist, the legs at the knees, and extending arms and hands in any direction · Continuous standing and walking · Able to use upper extremities frequently, work with both arms above shoulders and use both arms at full length frequently. · Must be able to meet physical lifting demand up to 50lbs. · Frequent use of hand tools and power tools More Information This job description outlines the essential functions of the job and does not contain a comprehensive list of all possible responsibilities, tasks, and duties.

Reports to Operations Team CORE VALUES: Customer Focused (develop relationships, exceed expectations, treat customers like you would like to be treated) Respect (employees, customers, suppliers, our brand) Teamwork (collaboration, open communication, be passionate and have fun) Results Driven (strong will to win; work to standard, not to time) Kaizen (continuous improvement; embrace change; don't settle, share ideas) WE OFFER: Competitive pay Great benefits package Excellent growth opportunities Great work/life balance. Job Responsibilities: Connect parts together to assemble products per instructions Learn other job functions such as debur and finishing and serve as back up when necessary Assist with boxing, crating products when needed Participate in daily and scheduled cleaning and housekeeping duties Maintain productivity per company standards Attend monthly safety trainings, follow and support all company safety initiatives Other duties as assigned by supervisor Qualifications: 1-2 years of related experience and/or education Construction related or sheet metal experience helpful Must have experience using power tools and hand tools Attention to detail Ability and willingness to follow instructions Must pass background check as well as pre-employment physical and drug screen Physical Requirements: Must be able to lift at least 50 lbs Physical ability to stand for long periods Walking, bending, lifting, pulling, pushing, climbing on ladders Work environment is well ventilated but not air-conditioned

Full-time Description About Us: KF Valves was founded more than 60 years ago with the vision of transporting crude oil even more safely and efficiently. Valves have always been at the heart of every transport route used for various fluids. Every day, our experienced team performs diverse and complex tasks at our headquarters in Houston, Texas, to ensure that individual orders are completed professionally and on time, and that the functionality and quality of our products is being continuously improved. Job Purpose: The Assembler I role is responsible for producing finished goods and services to meet our customers quality and timeliness demands and support the achievement of the site's business goals and objectives. Duties & Responsibilities: Assembles or assists others in assembling (selects, inspects, moves, and manipulates valve components) and/ or tests valves to the current Assembly Test Instructions (ATI), perform final valve inspection to include 5s responsibilities. Occasionally performs material handling to include forklift operation. Occasionally performs assembly painting and tagging responsibilities, following all other applicable standards and safety procedures. Actively participates in site safety and quality programs, including our Drive to Zero safety program. Displays ability to exhibit dependable behavior regarding company policies and practices (i.e., attendance). Ability to obtain an in-house forklift certification, including use of stand-up forklift. Ability to select and utilize the correct welding procedure for a specific requirement. Ability to read and interpret documents, procedures, and instructions satisfactory to successfully perform assigned duties in a safe manner. Ability to support production needs and identify improvements in production operations and effectively communicate both opportunities and solutions. Displays flexibility in approach to work scope daily activities to ensure the site and company meets its production and financial goals. Duties and responsibilities may change, and new ones may be added, at any time with or without advanced notice. Requirements Skills & Qualifications High school diploma or general education degree (GED). Minimum of 1-2 years of related production or mechanical assembly experience and/or training.? Working Conditions: The worker is subject to inside environmental conditions: Protection from weather conditions but not necessarily from temperature changes. The worker is subject to noise: There is sufficient noise to cause the worker to shout in order to be heard above the ambient noise level. Physical Requirements: Medium work: Exerting up to 50 pounds of force occasionally, and/or up to 20 pounds of force frequently, and/or up to 10 pounds of force constantly to move objects. Reaching: Extending hand(s) and arm(s) in any direction. Standing: Remaining upright on the feet, particularly for sustained periods of time Repetitive motions: Making substantial movements (motions) of the wrists, hands, and/or fingers. Background Check: Employment will be dependent on the candidate successfully passing a background check. Benefits: KF Valves LLC offers competitive compensation based on qualifications, a comprehensive benefits package including medical, dental, vision, and 401k benefits. Paid holidays and Paid Time Off (PTO) are also offered.

Job DescriptionReports to Operations Team CORE VALUES: Customer Focused (develop relationships, exceed expectations, treat customers like you would like to be treated) Respect (employees, customers, suppliers, our brand) Teamwork (collaboration, open communication, be passionate and have fun) Results Driven (strong will to win; work to standard, not to time) Kaizen (continuous improvement; embrace change; don't settle, share ideas) WE OFFER: Competitive pay Great benefits package Excellent growth opportunities Great work/life balance. Job Responsibilities: Connect parts together to assemble products per instructions Learn other job functions such as debur and finishing and serve as back up when necessary Assist with boxing, crating products when needed Participate in daily and scheduled cleaning and housekeeping duties Maintain productivity per company standards Attend monthly safety trainings, follow and support all company safety initiatives Other duties as assigned by supervisor Qualifications: 1-2 years of related experience and/or education Construction related or sheet metal experience helpful Must have experience using power tools and hand tools Attention to detail Ability and willingness to follow instructions Must pass background check as well as pre-employment physical and drug screen Physical Requirements: Must be able to lift at least 50 lbs Physical ability to stand for long periods Walking, bending, lifting, pulling, pushing, climbing on ladders Work environment is well ventilated but not air-conditioned Powered by JazzHR uvmg Qu0wz4

Job Description General Assembler Performs duties under the direction of area supervisor and/or lead man in assigned department. This could include the following departments. Assembly Paint Fabrication Doors Final Assembly Essential job functions: Plays key role in department metrics including safety; cost; quality and delivery. Verifies conformance of finished goods. Ensures quality in every task performed. Builds product to design specification utilizing drawings. Maintains a clean and safe work environment. Adheres to all company general and safety policies. Marginal job functions: Perform other tasks as assigned by supervisor Knowledge, skills and abilities: Ability to carry out not only simple but complex oral and written instructions. basic math skills Ability to read and understand English sufficiently. Ability to operate hand tools including but not limited to drills; grinders; heat guns; rivet guns. Ability to comprehend additional training in relation to the performing of the work duties. Ability to cross train and perform many different tasks across multiple departments. High level of attentiveness and physical coordination to perform the work activities safely and productively. Physical demands: Most of the work tasks are performed in-door and subjected to environmental and weather condition changes. Hours: 8 or more hours per day Week: 40 or more Lunch: Half hour. Sitting/standing: Stands 100 % of the time Environment: Shop is not air-conditioned Stress: Medium Physical task: Must bend, squat, lift, push or pull material up to 50 lbs frequently. Qualifications Standards: Prior experience in a fast paced manufacturing environment is preferred. Performance Standards: The criteria for evaluation in this position include, but are not limited to, the following: The ability to communicate effectively with and work with other personnel. Proper operation of equipment. Visual observation and periodic verification. Job Posted by ApplicantPro

We are seeking a reliable and detail-oriented Assembler to join our manufacturing team! The ideal candidate is dependable, eager to learn, and comfortable working with tools in a fast-paced production environment. In this role, you will be responsible for performing basic assembly of components to build industrial light fixtures. You will ensure products are accurately and safely assembled using hand tools and air-powered tools, while following established procedures. This role involves close collaboration with cross-functional teams to deliver reliable, cost-effective products that align with company goals and meet customer expectations. ESSENTIAL DUTIES & RESPONSIBILITIES Assemble various types of industrial light fixtures according to work instructions and diagrams. Use hand tools, air-powered tools, and basic measuring devices. Perform inspections to ensure fixture meets quality standards and complete required documents. Pack and label finished products. Maintain a clean and organized workstation. Communicate any material shortages or defects to the assembler lead and/or supervisor. Follow all safety procedures and company policies. EDUCATION and EXPERIENCE Experience: 1-2 years of experience in assembly role preferred. On the job training provided for the right candidate. Education: High school diploma or GED preferred. Basic understanding of hand and power tools. Ability to follow verbal and written instructions in English. Strong attention to detail and good hand-eye coordination. Ability to lift up to 50lbs and stand for extended periods. Willingness to work as part of a team in a production environment. WORK ENVIRONMENT On-site in manufacturing facility with exposure to noise, moving equipment, and air tools. Required to stand for long periods of time. PPE required: safety toed shoes. Schedule is Monday through Friday 7am - 3:30pm. Address: 8500 Hansen Rd, Houston, TX 77075 FLSA Status: Non-Exempt

Job Description About Company: Madden Bolt is the leading fabricator of quality steel industrial fasteners and miscellaneous steel parts. Our history began in 1942 as a small steel bolt fabricator that would eventually inspire a seventy-year legacy of customer-driven steel manufacturing solutions. Over the years, the Madden family continued to strengthen its business model with a focus on expedited fastener solutions, persevering through another two generations under the nationally recognized brand, Madden. The company started offering galvanizing services in 2007 to address an efficiency gap in the industry. Madden's business grew substantially as customers began to realize the benefits of dealing with just one service provider for fabrication and finishing solutions. Today, the company has evolved into a full-scale fabrication operation with global capabilities. An additional fabrication facility was added in 2016 to meet increasing demand. Though much has changed since the 1940's, one thing will always remain - our relationships with customers. Madden combines good old-fashioned partnerships with unparalleled efficiency to meet the demands of today. Our customers know that when we work together, we can accomplish almost anything, even last minute fabrication needs. About the Role: The Projects Assembler plays a critical role in the successful completion of various assembly projects by meticulously putting together components and ensuring that all parts meet quality and design specifications. This position requires a detail-oriented individual who can interpret technical drawings and instructions to assemble products accurately and efficiently. The assembler will collaborate closely with project managers and quality control teams to maintain production timelines and uphold safety standards. By performing thorough inspections and testing assembled units, the assembler ensures that the final products are reliable and meet customer expectations. Ultimately, this role contributes directly to the operational success and reputation of the company by delivering high-quality assembled projects on schedule. Minimum Qualifications: High school diploma or equivalent. Proven experience in assembly or manufacturing environments. Ability to read and interpret technical drawings and assembly instructions. Basic proficiency with hand and power tools. Strong attention to detail and manual dexterity. Preferred Qualifications: Experience with electronic or mechanical assembly projects. Familiarity with quality control procedures and standards. Certification in assembly or manufacturing processes. Ability to use precision measuring instruments such as calipers and micrometers. Prior experience working in a team-oriented production environment. Responsibilities: Read and interpret blueprints, schematics, and assembly instructions to accurately assemble project components. Select and prepare materials and tools required for assembly tasks according to project specifications. Assemble parts and subassemblies using hand tools, power tools, and precision measuring instruments. Conduct quality checks and functional tests on assembled products to ensure compliance with standards. Collaborate with project managers and team members to address assembly challenges and improve processes. Maintain a clean and organized work area while adhering to all safety protocols and company policies. Document assembly activities and report any defects or issues encountered during the process. Skills: The Projects Assembler utilizes technical reading skills daily to interpret complex blueprints and assembly instructions, ensuring accurate construction of components. Manual dexterity and proficiency with hand and power tools are essential for efficiently assembling parts while maintaining high quality. Attention to detail is critical when performing inspections and functional tests to identify any defects or inconsistencies. Communication skills facilitate effective collaboration with project managers and team members to resolve issues and optimize assembly processes. Additionally, organizational skills help maintain a safe and orderly workspace, contributing to overall productivity and compliance with safety standards.

Join Our Team as an Assembler at Sentry! Are you a skilled assembler with a passion for precision and quality? Sentry is looking for a dedicated Assembler to join our team and contribute to our mission of delivering top-notch products through meticulous mechanical and electrical assembly. About Sentry: At Sentry, we pride ourselves on innovation, quality, and customer satisfaction. Our brand is synonymous with reliability and cutting-edge technology. We foster a collaborative environment where every team member can thrive and contribute to our mission of excellence. Position Overview: Title: Assembler Reports To: Manufacturing Manager Location: Houston, TX As an Assembler, you will plan and perform diversified mechanical and electrical assembly operations to assemble intricate or large and expensive equipment. You will also guide and check the work of Assemblers of lower classification and Production Assistants. Key Responsibilities: Assembly Planning: Plan mechanical assemblies to be done by yourself or others. Perform planning and layout work utilizing available space for best workmanship and results. Quality Assurance: Perform fitting, aligning, and adjustments to ensure proper flow, layout, and free action of movable parts and operating requirements. Recognize defective parts and direct others in unit testing. Tool Usage: Use a wide variety of assembly and test fixtures, and hand and power tools. Safety Compliance: Observe company safety rules and use assigned Personal Protective Equipment (PPE) as required. Operate cranes or forklifts (as certified) to move larger/heavier items. Additional Duties: Perform other work as required by the supervisor. Qualifications: Education: High school diploma or equivalent experience. Experience: Minimum five years of mechanical experience. Skills and Knowledge: Demonstrates A Player Competencies: Aptitude, Alliance, Agility, Accountability, Awareness & Anticipation. Strong mechanical aptitude. Cooperative attitude and ability to function effectively as a team member. Basic computer skills with Microsoft Office and ERP programs. Knowledge of design, layout, mechanical principles, and product operation. Detail-oriented with strong attention to detail and accuracy. Ability to read blueprints, electrical schematics, measuring devices, and Work Instructions. Skill with mechanical assembly techniques. Basic welding knowledge and skill with safe operation of hand and power tools. Ability to operate overhead crane and/or forklift. Physical Requirements: Ability to bend, reach, squat, and lift up to 50 pounds. Good spatial orientation, eye-hand coordination, and eyesight. Normal color vision, demonstrated by identifying various wire colors. Why Sentry? At Sentry, we value our employees and provide opportunities for growth and development. Join us and be part of a team that is dedicated to innovation and excellence. We offer competitive salaries, comprehensive benefits, and a supportive work environment. Apply Now! If you are ready to take your career to the next level and make a significant impact, apply now to become an Assembler A at Sentry. Together, we can achieve great things! Equal Opportunity Employer, including Veterans and Individuals with Disabilities Click the link to learn more about our culture and benefits! *********************************

The Assembler is responsible for manually feeding laundry into machinery, such as folding and ironing machines. The Assembler staff works as a team, and each member may operate different machines within a shift, as well as handle both wet and dry laundry as needed. Essential Job Functions, Duties, and Responsibilities This position will work within a team of people performing similar duties. Along with one or more team members, an Assembler may perform some or all of the following duties during a given shift: Push/pull a cart of clean linen to workstation Identify the customer by the customer tag Separate mixed clean linens Feed linens into machinery for folding or ironing Fold linens and mops by hand Place linens on an automated conveyor Place linen onto a metal hanger (cubicle curtains) When necessary, stack linen as it comes out of folding or ironing machines Visually and manually inspect linen to maintain quality Maintain a clean workstation Demonstrates friendly and respectful behavior in the work environment Assist in any job necessary as instructed by Management Additional duties as assigned Perform job rotation as required Additional Responsibilities: On occasion, an Assembler may be requested to handle linen that requires special attention, including: Counting folded linens and stacking them by count Assisting in conducting inventories for accounts Minimum Qualifications Ability to read comprehend and write in English and/or Spanish Quality orientation and high attention to detail Ability to manage multiple tasks and priorities and easily adapt to changing situations Strong teamwork skills - ready and willing to work closely with team members Open, and able, to work, day or night shifts, and willing to rotate shifts depending on production needs Open to long hours and working weekends (Saturday/Sunday) when needed Pass a background check and drug screen, in accordance with applicable laws. Preferred Qualifications Prior experience working in a plant environment Requirements Physical / Mental Requirements Physical demands include constant standing and frequent walking throughout entire work shift, and ability to maintain body equilibrium to prevent falling when walking, standing, or crouching on work surface Constant reaching above and below shoulder height, twisting, applying pressure, grasping, and pulling (including using fingers, thumbs, and palm) items, and loading machinery in a repetitive motion. Lifting and raising objects from a lower to a higher position or moving objects horizontally from position to position. This occurs constantly throughout the shift requiring substantial use of the upper arms, shoulders, and back muscles. Constant pushing/pulling of both empty and full, wheeled laundry carts of varying weights and sizes, up to and potentially exceeding 250 pounds. Constant throughout entire 8-hour shift, fingering, fine manipulation, picking and grasping primarily with fingers rather than with the whole hand or arm. Repetitive hand movement includes simple and power grasping and pushing and pulling items. Heavy work, including exerting force and lifting up to 50 pounds on a frequent basis and up to 20 pounds force constantly to move objects. Pulling, using upper arms and shoulders to exert force in order to draw, drag, haul or tug objects in a sustained motion. Ability to maintain productivity requirements in a fast-paced facility where all operations are driven by fully functioning, full life cycle computer system. System uses time sensitive production that follows a system of conveyor surfaces to move products and materials through the entire cleaning process to assure highest quality cleaning functionality. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Ability to understand, remember and apply oral and/or written instructions or other information. Ability to remember and communicate routine, factual information. Ability to organize thoughts and ideas into understandable terminology Ability to apply common sense and make decisions which have a moderate impact on the immediate work unit Ability to understand and follow basic instructions and guidelines. Ability to express or exchange ideas by means of the spoken word, communicating orally with others accurately, loudly, and quickly Ability to count accurately Required to wear and use personal protective equipment as needed. Ability to hear for safety and awareness of surroundings. Must be able to meet the physical demands for the entire shift. Work Environment Production areas of a typical industrial laundry facility, which includes working with and around large machinery, variations in temperature (non-air-conditioned work area), noise, humidity, and other hazards. Worker is subject to sustained hot working environment (i.e., inside environmental conditions without cooling air conditioning and variable internal temperatures that can be within range of 90 degrees Fahrenheit and higher). Worker is exposed to noise sufficient enough to require worker to shout to be heard above ambient noise level. Scheduled Weekly Hours: 40 EEO Statement Employees of Division Laundry Houston, LLC are protected by federal laws, Presidential Executive Orders, and other laws designed to protect employees from discrimination on the basis of race, religion, color, sex (including pregnancy and gender identity), sexual orientation, parental status, national origin, age, disability, family medical history or genetic information, political affiliation, military service, or any other non-merit based factor. These protections extend to all management practices and decisions, including recruitment and hiring practices, appraisal systems, promotions, and training and career development programs. Employees of Division Laundry Houston, LLC are also protected against retaliation. Consistent with federal laws, acts of retaliation against an employee who engages in a protected activity such as, whistle blowing, or the exercise of any appeal or grievance right provided by law will not be tolerated. Managers and supervisors of Division Laundry Houston, LLC are also reminded of their responsibility to prevent, document, and promptly correct harassing conduct in the workplace. Salary Description $12.80/hr.

Who We Are National Assemblers, Inc is family-owned and the largest retail assembly company in the world, with over 10 Million products assembled for our customers last year. We are the trusted provider to the world's largest brands like Walmart, Amazon, Wayfair, Bass Pro Shop, and most importantly, to individual customers who trust us in their homes. We were awarded “Assembly Company of the Year” for 2022 all due to our hardworking technicians who have pride in all they do! We are also the fastest growing, with over 100 new management roles created and filled last year! If you have the will and the skill, we have the opportunities for you! Who You Are You love working with your hands to build products. You're the one all of your family and friends call to assemble their new treadmill or desk or mount their new TV. You have an entrepreneurial spirit and like the benefits and backing of a W2 organization. You enjoy independence and are self-motivated. You are a great communicator and enjoy interacting with customers. Customer satisfaction and high quality is your top goal when working. You're a problem-solver and proactively seek solutions. You are reliable and have a proven attendance record. You're not afraid of hard work and enjoy a good challenge. If this sounds like you, we would love you to join our NAI team! Key Responsibilities Bed Warranty Repairs - Troubleshoot and fix mechanical or structural issues on various bed types Furniture Assembly - Assemble bed frames, desks, chairs, shelving units, and more Fixture Mounting & Installation - Install wall fixtures such as painting, mirrors, and other home fixtures securely TV Mounting & Installation - Mount, install, and setup TVs, ensuring secure placement and optimal viewing angles Entertainment System Installation & Setup - Install and configure home theater systems, soundbars, and streaming devices Provide top-tier customer service, educating customers on product use and maintenance Maintain accurate records of installations and repairs using company software Follow all safety and quality control procedures to ensure professional results What We're Looking For Experience in installation, assembly, or repair work (preferred but not required) Familiarity with entertainment and security system setup is a plus Mechanical aptitude and ability to use hand/power tools Strong attention to detail and problem-solving skills Excellent customer service and communication abilities Ability to lift and move heavy equipment (50+ lbs) Valid driver's license and clean driving record Benefits: Weekly Pay Medical/Dental/Vision Insurance 401K Paid Certification Program W-2 Employee The Fine Print NAI pays our “in-home” techs competitive earnings per piece being paid for every completed project. Our focus is on efficiency, quality, and safety above all else! Your will and your skill will enable you to determine the pay you desire for yourself. Our dedicated team will give you all the tools and training necessary to unlock your maximum potential. Full and part-time work is available, and jobs and schedules will vary depending on location. You will be a W2 employee (not a subcontractor!), meaning you will be trained, insured, paid appropriately for all hours, including overtime, and eligible for benefits. Start a Career that you Love with National Assemblers, Inc. APPLY NOW to start building your future with us! National Assemblers, Inc is an equal opportunity employer and does not discriminate against otherwise qualified applicants on the basis of race, color, creed, religion, ancestry, age, sex, marital status, national origin, sexual orientation, disability or handicap, veteran status and any state and local protected status.

Assembler Nights Responsible for putting together components or parts to create finished products. Responsibilities: Build product until fully completed by following blueprints, work instructions, or diagrams to assemble. Fits, aligns, calibrates and adjusts parts and mechanisms to meet tolerance and product requirements. Must be able to use a various tools and equipment. Must be able to work in a manufacturing or production environments. Perform quality checks and ensure that products meet specifications. Inventory control and cycle counts Maintaining a clean and organized work area. Reporting any issues or defects to supervisors. Attention to detail, manual dexterity, and the ability to work as part of a team are important skills for an Assembler. Skills & Abilities: Ability to follow direction. Effectively demonstrate on-time delivery of finished goods. Self-Starter with ability to multitask Physical Demands: manufacturing setting, standing, bending, lifting, moving materials. Ability to read and write in English High School Diploma or GED required. 1 year of previous assembler experience on the production floor (preferred) Ability to work days or night shift, overtime, weekend as needed, 8-10 hr. shifts. Nights (3:30 pm -4:00 am)

Requirements Physical Requirements: Must be physically capable of lifting 50 lbs. Ability to frequently sit, stand, walk, reach within hand and arm length, stoop, kneel, and crouch. Full hand dexterity Must be able to stand on your feet for long periods of time Entry Level Qualifications: High school diploma or equivalent Be able to pass basic assessment Previous manufacturing experience preferred 1 year of previous production experience in assembly or experience working with hand tools English verbal, reading and written proficient.

Assembles bolts and nuts at designated bolt assembly table, packages bolt orders, over taps nuts, and pulls nuts between departments. May pull bolt orders and deliver material within departments. Job Duties and Responsibilities Receives bolt orders. Retrieves appropriate bolt material from storage location(s). Assembles bolts and nuts using the Bolt Assembly table. Setup over tap machine to over tap nuts. Packages bolts to prevent damage during normal handling. Lists completed bolt orders in logbook. Delivers materials to proper personnel/storage location. Performs physical count of bolt material for inventory. Must have clear understanding and practice all safety rules and regulations. Must have clear understanding of Quality Policy and Quality System Programs. Maintains a clean and organized workstation. May perform other duties as assigned by lead or supervisor. Job Specifications Skills Excellent verbal and written communication skills. Ability to read and interpret instructions and detailed manufacturing procedures. Ability to understand and read measuring tools such as tape measurer and/or ruler. Education Required: High school diploma or equivalent. Work Experience No prior work experience required, but experience in a warehouse / manufacturing setting is preferred. Physical Requirements Must be able to lift fifty pounds independently. Ability to lift, climb, bend, stoop, push and pull. Continuous standing and/or walking. Moderate physical effort- working frequently with average weights of ten to fifty pounds or continuously with lighter weights. Good eye/hand/foot coordination Ability to work in cold, hot and/or dusty environment, with noisy conditions and occasionally outside in the elements.

An Assembler is responsible for putting together components or parts to create finished products. They follow blueprints, work instructions, or diagrams to assemble products using various tools and equipment. Assemblers may work in manufacturing or production environments and may be required to perform quality checks and ensure that products meet specifications. They may also be responsible for maintaining a clean and organized work area and reporting any issues or defects to supervisors. Attention to detail, manual dexterity, and the ability to work as part of a team are important skills for an Assembler. The Assembler will report to the Manufacturing Supervisor of the Assembly department, and will be responsible for assembling electrical units, switchgear and other Powell products. Essential Responsibilities • Build and assemble mechanical components for Switchgear and/or Breaker units according to engineering drawings and customer specifications. • Perform maintenance and proper use of tools. • Perform in process inspections; ensure quality by following standard work instructions and identifying any potential risks to product quality. • Perform all ship prep functions including splitting gear. • Promote a safety culture as well as attend all safety meetings. • Ensure that work areas remain clean and well organized. Minimum Qualifications • Minimum education level of a High School Diploma or General Education Equivalent Diploma is preferred. • Ability to read a tape measure (including conversions from fraction to decimal and conversely from decimal to fraction and metric to imperial). • Basic knowledge of a variety of hand/power tools. • Lift up to 50lbs using proper lifting techniques. Preferred Qualifications • Basic computer knowledge considered an asset. • Basic command of the English language, both written and verbal. • Prior ability or interest in building or repairing mechanical components considered an asset. • Read and understand spec sheets and follow proper use of hardware by spec requirements. • Basic knowledge of one line and three-line drawings. • Safety training certificates are an asset for the position. Skills, Abilities & Other Requirements • Positive attitude. • Willingness to learn. • Ability to follow direction from Senior Assemblers and Lead Assemblers. • Effectively demonstrates on-time delivery and the ability to stay focused on goals and responsibilities. • Self-starter with ability to take on multiple tasks with a drive to succeed. • Challenges the status quo; looks for better or more efficient ways to get results. • Ability to adapt to new ideas, technology, processes or product changes. • Believes and displays through actions that our customers represent our current success and remain vital to our future growth. • Demonstrates integrity and ethical decision making. • Conscientious, thorough, accurate, and reliable when performing and completing job tasks. • Able to work effectively within your team and around other departments and their activities. • Ability to learn and adhere to all manufacturing policies and practices to ensure adherence to ISO requirements. Working Conditions • Safety sensitive position in a temperature-controlled manufacturing or industrial environment with occasional outside activities. • Required to wear personal protective equipment (PPE) (i.e., safety shoes, hard hats, bump caps, safety glasses, hearing protection, safety harnesses as required) and respirators when required. • Must be able to work from all type of ladders (step ladders, "A" frame ladders, etc.) • Working at heights usually no higher than 20 feet in the air on an elevated structure using proper lift equipment and Fall Protection Equipment. Physical Requirements • Able to maintain body equilibrium and agility to prevent falling when walking, standing, crouching, ascending or descending stairs or step ladders • Bending the body at the waist, the legs at the knees, and extending arms and hands in any direction • Continuous standing and walking • Able to use upper extremities frequently, work with both arms above shoulders and use both arms at full length frequently. • Must be able to meet physical lifting demand up to 50lbs. • Frequent use of hand tools and power tools More Information This job description outlines the essential functions of the job and does not contain a comprehensive list of all possible responsibilities, tasks, and duties.

Job DescriptionAssembler Reports to Operations TeamCORE VALUES: • Customer Focused (develop relationships, exceed expectations, treat customers like you would like to be treated) • Respect (employees, customers, suppliers, our brand) • Teamwork (collaboration, open communication, be passionate and have fun) • Results Driven (strong will to win; work to standard, not to time) • Kaizen (continuous improvement; embrace change; don't settle, share ideas) WE OFFER: • Competitive pay • Great benefits package • Excellent growth opportunities • Great work/life balance Job Responsibilities: • Connect parts together to assemble products per instructions • Learn other job functions such as debur and finishing and serve as back up when necessary • Assist with boxing, crating products when needed • Participate in daily and scheduled cleaning and housekeeping duties • Maintain productivity per company standards • Attend monthly safety trainings, follow and support all company safety initiatives • Other duties as assigned by supervisor Qualifications: • 1-2 years of related experience and/or education • Construction related or sheet metal experience helpful • Must have experience using power tools and hand tools • Attention to detail • Ability and willingness to follow instructions • Must pass background check as well as pre-employment physical and drug screen Physical Requirements: • Must be able to lift at least 50 lbs • Physical ability to stand for long periods • Walking, bending, lifting, pulling, pushing, climbing on ladders • Work environment is well ventilated but not air-conditioned Powered by JazzHR 7UotfUfhy4