Assembler jobs in Thousand Oaks, CA - 163 jobs

Contract Contract Duration: 6+ Months Shift details : 1st Shift Day starts at : 05:00AM Day Ends at : 01:30PM Working Days : Monday - Friday JOB DESCRIPTION: The Production Assembler I performs a range of routine mechanical and/or electromechanical assembly operations, under well-defined instructions and in accordance with company policy and safety procedures. Job Core Responsibilities: Performs a range of routine mechanical and/or electromechanical assembly of small parts or components in accordance with company instructions and procedures Reviews shop traveler route card, or uncomplicated schematic drawings to confirm correct sequence of operation Position very small parts such as ceramic board, crystals, gages, fine pins, fire wire, solder particles and epoxy under binocular microscope using tweezers or positioning fixtures Adjusts, bends, aligns and solders fine wires to resistors and base parts Bonds or seals parts or assemblies with epoxies using direct heating elements or ovens and performs a variety of in-process testing Demonstrates all safety policies and procedures Other responsibilities as assigned Regular, consistent and punctual attendance is required. May need to work nights and weekends, variable schedule(s) and additional hours as necessary Job Specifications: Education: A Secondary Certificate/High School Diploma or equivalent combination of relevant education and work experience that will allow successful performance of job expectations is preferred. Certifications: Vocational training, apprenticeships or the equivalent experience in related field Years Experience: 1-2 years of relevant experience Skills: Good mechanical aptitude Able to operate a variety of hand tools and light machinery Capable of performing basic mathematics Ability to read and interpret company documents, such as safety rules, operating/manufacturing instructions, policies and procedure Good manual dexterity required to work with small parts Able to problem-solve using existing procedures to perform straightforward tasks Effective oral, written and interpersonal skills

**Be visionary** Teledyne Technologies Incorporated provides enabling technologies for industrial growth markets that require advanced technology and high reliability. These markets include aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, deepwater oil and gas exploration and production, medical imaging and pharmaceutical research. We are looking for individuals who thrive on making an impact and want the excitement of being on a team that wins. **Job Description** Teledyne Relays (a business unit of Teledyne Defense Electronics, LLC), is a manufacturer of Electromechanical Relays, Solid State Relays, Power Controllers, RF COAX Switches and RF switching systems. The primary manufacturing facilities are located in the United States, Taiwan and France. We are a vertically orientated manufacturing and design company with major operations in Southern California. Teledyne Relays' mission, vision, and value statements have never really changed in principle since 1963. Dedication to every employee and client's success; Innovation that matters - for our company and for the world; Trust and personal responsibility in all relationships - **Teledyne Relays is EveryWhereYouLook!** Position Summary and Responsibilities + Responsible for operating various automatic and semi-automatic machinery. + Will need to perform quality inspections on all parts produced, bagged or packaged in carriers. + Be open to learning and acquiring job skills through continual cross-training of all/any departmental equipment as needed, while following Company policies, rules/regulations and safety procedures. + Maintain updated paperwork per specifications, maintain operation sheets, and check for in service calibration tags for all tools and equipment being utilized for current labeling. + Housekeeping, keep all areas clean, organized and practice proper storage of tools. + Other duties as assigned by Lead/Supervisor. Qualifications + High School Diploma or equivalent (GED); vocational school training acceptable. + 6 months to 1 year of previous related experience is preferred. + Candidate must be able to work with a microscope, small hand tools, have good manual dexterity and good hand/eye/tool coordination. + Must be familiar with and have basic computer skills to be able to make data entries on a daily basis for labor hours and for inventory control. + Be cross trained on equipment as needed, and continue to build knowledge, skills and abilities throughout the department. + Must be able to work as a team as well as independently. + Must have good oral and written communication skills and know basic math. + Be able to interpret instructions provided orally or written via diagram or schedule form + PHYSICAL DEMANDS: Candidate will occasionally stand, walk, stoop, bend, knee, crouch; be able to lift and carry 10-24 lbs; you will frequently need to hear to listen or talk to ask questions or provide feedback; will continuously need to sit, use hands to handle or feel, reach with hands and arms. + VISION REQUIREMENTS: be able to identify and distinguish colors, be required to use close vision, have the ability to adjust focus and determine depth. + WORK ENVIRONMENT: you will be exposed to vapors, airborne particles or toxic chemical (safely below occupational limits); work near moving mechanical parts and/or be in contact with moving mechanical equipment. In our efforts to maintain a safe and drug-free workplace, Teledyne Relays requires that candidates complete a satisfactory background check and pass a drug screen prior to employment. Due to the type of work at the facility and certain access restrictions, successful applicants must be a "US Person" (US Citizens, US Nationals, lawful permanent residents, asylees or refugees). **Salary Range:** $34,300.00-$45,700.000 **Pay Transparency** The anticipated salary range listed for this role is only an estimate. Actual compensation for successful candidates is carefully determined based on several factors including, but not limited to, location, education/training, work experience, key skills, and type of position. Teledyne conducts background checks on qualified applicants who receive a conditional offer of employment in accordance with applicable laws, regulations and ordinances. Background checks may include, but are not limited to, education verification, employment history and verification, criminal convictions, Motor Vehicle Report (MVR & driving history), reference check, credit checks/credit history and drug testing. All qualified applicants with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act. Teledyne and all of our employees are committed to conducting business with the highest ethical standards. We require all employees to comply with all applicable laws, regulations, rules and regulatory orders. Our reputation for honesty, integrity and high ethics is as important to us as our reputation for making innovative sensing solutions. Teledyne is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age, or any other characteristic or non-merit based factor made unlawful by federal, state, or local laws. You may not realize it, but Teledyne enables many of the products and services you use every day **.** Teledyne provides enabling technologies to sense, transmit and analyze information for industrial growth markets, including aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, energy, medical imaging and pharmaceutical research.

About Us Hydrafacial is a global category-creating company focused on bringing innovative products to market and delivering beauty health experiences by reinventing our consumer's relationship with their skin, their bodies and their self-confidence. Every person here is a key player in our success. We are firm believers in making the little things count each day so the big things will follow. If this sounds like you, come check us out! This is the perfect opportunity to work with some of the best leaders in the industry while you gain the global and strategic experience to add to your professional toolbox. Job Description: We are seeking an experienced Manufacturing Assembler to be responsible for assembling parts and components according to our manufacturing operating procedures. The successful candidate will be able to work in a fast-paced environment and possess excellent attention to detail with a minimum of 3 years experience in a manufacturing/assembly setting. This is a full-time, on-site position based in Long Beach, CA and requires on-site presence five days a week. What you'll do: Primary Responsibilities: Use hand and/or power tools (such as wire stripper, crimper, drills, soldering station) to assemble and/or package a complete product from scratch or sub-assemblies Acknowledge and communicate product rejects/non-conforming items to Leads to resolve Receive and maintain certified trained status for updated revisions in all relevant Production Lines and their individual stations Document production activities accurately and promptly Report any issues or defects to the supervisor immediately Follow all safety guidelines and wear appropriate personal protective equipment (PPE) Participate in continuous improvement initiatives and training programs Collaborate with team members and support cross-functional activities as needed Work schedule may include shifts and overtime as needed to meet production demands Assist in cross-training of production employees Perform other duties as assigned Qualifications & Experience: Required: High school diploma or equivalent 3 years of experience in assembly or manufacturing Must be able to read, understand and follow work instructions (MOPs) and basic diagrams in English as well as verbal instructions to complete assignments in a timely manner Must have a strong work ethic, able to take directions, and willing to ask questions when clarity is needed Good manual dexterity and hand-eye coordination Ability to stand, walk, and work with hands for extended periods Ability to plan, track & complete assignments in a timely manner Ability to lift 50 lbs with assistance Preferred: 1 year production leadership experience Experience with ISO 13485 or other quality management systems Familiarity with lean manufacturing principles We mean it when we say you'll LOVE this role. Base Pay: $19.47 to $22.00/hour An employee's pay position within the salary range will be based on several factors including, but not limited to, relevant education, qualifications, certifications, experience, skills, seniority, geographic location, performance, travel requirements, revenue-based metrics, any contractual agreements, and business or organizational needs. The range listed is just one component of Hydrafacial's total rewards package for our employees. Other rewards may include annual bonuses, long-term incentives based on level, paid time off, and region-specific benefits. Come grow and GLOW with us! Hydrafacial is proud to be an equal opportunity employer. We prohibit discrimination and harassment of any kind based on race, sex, religion, sexual orientation, national origin, gender identity, gender expression, age, disability, genetic information, pregnancy or any other protected characteristic as outlined by color, federal, state or local laws. We are committed to working with and providing accommodation to applicants with physical and mental disabilities. Hydrafacial does not accept unsolicited assistance or resumes/CVs from third party search firms. No fee will be paid in the event a candidate is hired by our company as a result of an agency referral or CV/resume submitted by a search firm to any employee at our company without a valid written search agreement. If we need additional support, we will be sure to reach out directly to one of our preferred providers. Please no phone calls or emails.

Job Description Base Pay: $18.00 - $22.00 per hour (based on experience) Employment Type: Full-Time - 1st Shift - 5-day work week - 5:00 AM - 1:30 PM Industry: Printing / Manufacturing Other Compensations: Health Insurance, Dental, Vison, Paid Vacation, 5 Personal Days, 9 Paid Holidays, 401K plan, Flexible Spending Account, Life Insurance, Long Term Disability, Employee Assistance Program. About Steven Label: Steven Label manufactures labels, overlays, membrane switches, sensors, product instructions for use (IFUs) and folding cartons - largely for the medical device industry. We provide our customers with some unique and valuable resources, including: A proprietary on-line system that permits order placement, tracking and art submission. ISO 13485 procedures to ensure quality products are delivered on time. 2 major manufacturing locations in California, 1 in Arizona and 1 in Mexico with broad capabilities including screen, flexographic, offset and digital printing. Support of Vendor Managed Inventory programs. In-house engineering expertise in the manufacture of membrane switches and medical sensors. Product Instructions for use on lightweight, pharmaceutical grade paper. A commitment to delivering world class service to customers. In business since 1954, Steven Label has a seasoned, customer-focused staff at all levels ̶ customer service, sales, engineering, production and management. Position Summary We are seeking detail-oriented and reliable individuals to join our Membrane Assembly team. The ideal candidate will be responsible for the inspection, assembly, and packaging of printed labels and circuits. This position plays a vital role in ensuring the quality and accuracy of our products throughout the production process. General Responsibilities Perform visual inspection and assembly of printed labels and circuits. Measure products to ensure correct dimensions using measuring tools such as micrometers, calipers, and rulers. Bag and label products accurately. Log product movements and process updates using computer systems. Maintain ongoing quality assurance throughout all production processes. Keep the work area clean, safe, and organized. Monitor and maintain inventory of materials and supplies. Perform additional duties as assigned. Job Requirements: Manual dexterity for handling small parts and precision assembly. Strong visual acuity for detailed inspection and assembly tasks. Ability to read, write, and follow work instructions in English. Experience using measuring equipment (micrometers, calipers, rulers). Solid math and communication skills. Self-motivated with the ability to work independently and within a team. Steven Label is an equal-opportunity employer. We do not discriminate on the basis of race, color, religion, creed, national origin or ancestry, sex, age, physical or mental disability, veteran or military status, genetic information, sexual orientation, gender identity, marital status, military status, order of protection status, or any other legally recognized protected basis under federal, state, or local law.

Assembling components and LED signs in a clean room environment. Performing tests on the assembly line to ensure quality. Performing regular maintenance tasks to keep the cleanroom environment clean and safe. Following strict cleanroom procedures and safety regulations to prevent contamination. Pay $18+ depending on experience. #EmploynetJobsOxnard

Job DescriptionCleanroom Assembler SUMMARY:Responsible for performing assembly operations for the single-use systems, assemblies, and products by performing assigned duties. ESSENTIAL FUNCTIONS Responsible for maintaining a sterile environment by garbing, cleaning, and acting according to the CGMP guidelines for clean room procedures. Measure, cut, position, and align tubing and small components for assembly. Operate cable guns, tubing spreader, bag sealers, tubing cutter and manual cutting devices. Read instructions and drawing assemblies to identify product specifications. Determine sequence of assembly. Clean components and finished assemblies. Operate in clean room environment. Other duties as assigned. QUALIFICATIONS: High School diploma or equivalent desired, with a minimum of six months related experience; or equivalent combination of education and experience. Possess industry-specific training on how to assemble intricate parts or products in a controlled room or facility. Demonstrate attention to detail with accuracy and thoroughness. Identify and resolve problems in a timely manner by gathering and analyzing information skillfully. Listens to direction and obtains clarification. Ability to read and interpret written information. Ability to write clearly and informatively. Follows policies and procedures. Meets productivity standards. Observes safety procedures, reporting potential unsafe conditions Use equipment and materials properly. Apply common sense to carry out instructions. Prepares and assembles necessary parts/products based on Work Order. Completes all forms associated with each lot/batch prepared by Assembler. Able to understand assembly drawings. Hand/eye coordination. Fingers and hand/grip dexterity required. Ability to regularly lift and/or move up to 10 pounds frequently lift and/or move up to 25 pounds and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus.

Yamaha Guitar Group is a leading manufacturer of electric guitar and bass products, consisting of the 'Line 6', 'Ampeg', 'Cordoba' & 'Guild' brand. We are looking for a motivated and highly technical Assembler to join the team! This role will be based from our Oxnard office and the applicant must live close enough to commute on a daily basis. This position will assist with sanding, assembling/gluing and inspecting wood products. This position requires precise attention to detail and proficient hand-to-eye coordination/dexterity. This role is a 40 hour per week role that will be temporary with an opportunity for conversion based on company needs and performance. Essential Functions: Assembly: Assemble wood components according to blueprints, drawings, or verbal instructions. Gluing: Apply adhesives and clamps to secure joints and ensure proper bonding. Sanding: Smooth surfaces using various sanding techniques and equipment to prepare for finishing. Inspection: Conduct quality control checks to identify and rectify defects. Material Handling: Transport materials and finished products within the assembly area. Tool Maintenance: Clean and maintain tools and equipment to ensure optimal performance. Adherence to Safety Protocols: Follow safety guidelines and wear appropriate personal protective equipment. Teamwork: Collaborate with other team members to achieve production goals and maintain a positive work environment. Required Skills/Abilities: In-depth knowledge of woodworking techniques and finishing processes Skilled in handling wood surfaces with precision and care Proficient in operating woodworking machinery and tools Understanding of guitar construction processes and industry standards Strong hand-eye coordination and manual dexterity Ability to stand for extended periods and walk between departments Repetitive motions, such as operating machinery, using hand tools, or sanding surface Must be able to lift 10-40 pounds Comfortable using PPE such as safety glasses, earplugs, and respirators Effective communication skills to collaborate with team members and provide feedback Strong attention to detail and a commitment to quality Ability to work independently and as part of a team Education and Experience: Prior experience in a woodworking or manufacturing environment Results oriented and driven, with a track record for delivering to plan Must be 18 years of age or older What you Bring to the table Woodworking experience is a plus Ability to work non-standard hours as required Understanding of guitar construction, manufacturing processes and machinery in a woodworking environment Ability to multi-task, prioritize next steps in process, and pivot as needed Possess strong verbal and written communication skills A passion for music and guitars What We Bring To The Table Opportunity to participate in 401k Employee Assistance wellness programs Employee product purchase program Casual dress Sick Time Salary Range is DOE $17/hr. - $19/hr. The posted pay range values provide the candidate with guidance on annual base compensation for the position, exclusive of overtime, and benefits-related compensation, over a range of qualifications that may fit hiring objectives. Yamaha Guitar Group will consider the individual candidate's education, work experience, applicable knowledge, skills and training, among other factors, when preparing an offer of employment. So if you want to help us define the next generation of music products and instruments, we'd love to hear from you! Yamaha Guitar Group, Inc. is an Equal Opportunity and E-Verify Employer and provides reasonable accommodations consistent with its legal obligations.

Job Description /Title: Assembler Department: Manufacturing Supervisor: Manager of Production/Director of Manufacturing FLSA Status: Non-Exempt About the Company: Valencia Technologies is a neuromodulation company transforming the standard of care for urgency urinary incontinence with the development of our revolutionary eCoin technology. Valencia Technologies is ramping up all aspects of business to deliver effective therapy and impact the lives of millions. Join our mission to become the market leader in overactive bladder care as we bring patients and physicians a better therapy now and beyond, put patients first, and be a place of respect, excellence, and honesty for our employees and clients. Job Summary: Under direct supervision of a manufacturing manager/supervisor, perform specific manufacturing/packaging operations. Perform repetitive production assembly/packaging tasks which can require positioning of small, delicate parts with precision. Ability to meet performance standards including line flow and output. The ability to accurately record component information on specified forms is required. The quality of one's workmanship is of critical importance. Responsibilities/Tasks: Employee is tasked with: 1. Follow detailed assembly/packaging instructions, processes and procedures. 2. Comply with policies, guidelines, and regulatory requirements per company's Quality System. 3. Reports problems (and potential problems) with quality, processes, equipment and materials to production management. 4. Maintain a clean and organized work area to facilitate manufacturing functions. 5. Perform other duties as assigned. Skills: microscope, cleanroom, assembly, medical device Additional Skills & Qualifications Required: 1. HS diploma or equivalent 2. Ability to effectively read, write and speak English Preferred: 1. Good written and oral communication skills 2. Medical device manufacturing experience 3. Familiarity with personal computers 4. Previous experience with microscopes Physical Requirements: 1. Ability to use hands to handle and feel small parts 2. Ability to frequently sit, stand, walk, and reach within hands and arms-length 3. Specific vision requirements include close vision and color vision Benefits: Medical Insurance Dental Insurance Vision Insurance 401K with Employer Matching Paid Time Off Paid Holidays Professional Development Reimbursement Annual Bonus Eligibility Valencia Technologies is proud to be an equal opportunity workplace and is an affirmative action employer

Job Description Masterite Division of DCX-CHOL Enterprises Inc. is seeking experienced Solder Assemblers with the following qualifications: With supervision prepare and solders electronic components onto Printer Circuit Boards (PCBs) according to specifications. Key Performance Indictors: List two to five measurable tasks that are key to indicating the performance level in this role: Perform basic SMT and thru hole hand component soldering per IPC-610 Class 3, J-Std-001 Operate hand and/or automatic tools safely. Lead forming of different types of electronic parts using hand tools and soldering stations on PCB (Printed Circuit Board) assembly. Work with leaded and lead- free solder. Basic ability to read PCB assembly drawings and related documents; ECN's, assembly instructions. Utilize electrical and manual tools such as soldering iron, de-soldering equipment, and solder removal tools. Basic understanding of PCB assembly processes, component installation sequence of thru hole components. Maintains department specific records. Other duties may be assigned. Qualifications and Experience: High School Diploma or equivalent 2+yrs Soldering experience - must have fine pitch and through microscope. (Need to pass Soldering test) Soldering multiple components on a circuit board. Requires excellent speed and accuracy Familiarity with ovens, hot plates, hot air pencil, etc. Soldering Experience per IPC-610 Class 3, J-Std-001. Ability to Read & Interpret Blueprints, Schematics, Traveler/Routers, Bills of Material & Wire Lists. Able to use a microscope to solder for extended periods Dexterity, steady hand to manipulate and position extremely small devices. Must be able to understand and follow verbal instructions and be detailed oriented. Maintain a clean, safe well organized work-station through routine housekeeping. Normal work time spent indoors A neat and tidy personal appearance must be maintained; ◦Occasional periods of high levels of physical exertion needed, this includes heavy lifting (50+ lb.), walking, bending, pushing large loads, carrying, stooping, reaching, etc. DCX-CHOL Enterprises is a privately held American owned Small Business. We are made up of five vertically integrated manufacturing and assembly divisions, each with their own history, specializations and products. Each division compliments the other with their unique skills and products and at the same time, each work together as a vertically integrated team to provide the most cost effective, high-quality interconnect products to our customers on time. ITAR REQUIREMENTS: To conform to U.S. Government space technology export regulations, applicant must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. DCX-CHOL Enterprises Inc. is an Equal Opportunity Employer; employment with DCX-CHOL Enterprises Inc. is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status. DCX-CHOL Enterprises Inc. will provide the Social Security Administration (SSA) and, if necessary, the Department of Homeland Security (DHS), with information from each new employee's Form I-9 to confirm work authorization via E-Verify.

Job DescriptionJob Title: Entry-Level AssemblerOverviewWe are looking for motivated individuals to join as Entry-Level Assemblers. Responsibilities Assist in the assembly of components following detailed instructions. Perform basic mechanical and hand assembly tasks using tools and fixtures. Follow safety procedures and maintain a clean, organized work area. Support team members with material handling and preparation. Learn and apply company quality standards. Qualifications Ability to read and follow basic written instructions. Strong attention to detail and willingness to learn. Ability to stand for extended periods and lift up to 40 lbs. Prior assembly or manufacturing experience a plus. Experience with power tools Apply today: Send your resume to ********************

Temp electronical assembler quick learner, high energy, able to multitask, and able to work over time as needed. We don't necessarily need this person to be a packaging person only, but able to do some higher level functions, and yes we would start their hourly pay accordingly to meet their experience ($17 - $18/hr +) . Assembly skills and good PC knowledge would be a plus. Mon - Friday steel toe shoes able to work ot and weekends at end of each month

Full-time Description An Assembly Worker (Level 1) is responsible for assembling and constructing products on a production line. They follow written and verbal instructions to assemble products to specific specifications, using hand tools and equipment to fit parts together. Here are the key responsibilities and qualifications: Responsibilities: · Follow Standard Work Instructions (verbal &written) · Assemble units by using various hand tools, assembly fixtures, adhesives, and lubricants. · Safely fasten parts and pieces together using specialty machinery and tools. · Ensure compliance with safety protocols during assembly. · Inspect parts and materials used in production to ensure quality. · Inspect each assembled piece for damage, loose screws/bolts, and other defects. · Verify correct quantities of parts and components. Inventory Management: · Maintain accurate records of parts and tools used in the assembly process. · Keep track of inventory levels and report shortages or excesses. · Adherence to Company Procedures · Follow company procedures, directives, and safety guidelines. · Work efficiently and effectively within established processes. · Testing and Verification · Test finished products for defects or malfunctions. · Ensure that assembled products meet quality standards. · Workspace Maintenance · Keep the assembly area clean, organized, and well-maintained. · Properly store and maintain the tools used for assembly. Requirements High school diploma or equivalent preferred. Basic computer knowledge (Microsoft Teams, Excel, Word, etc.) Mechanical knowledge or experience is a plus. Detail-oriented and able to follow technical instructions. Ability to work well with a team and collaborate with other departments. Physical stamina: Able to lift up to 20 lbs and stand / sit for extended periods. Salary Description 17.50

An Assembly Worker (Level 1) is responsible for assembling and constructing products on a production line. They follow written and verbal instructions to assemble products to specific specifications, using hand tools and equipment to fit parts together. Here are the key responsibilities and qualifications: Responsibilities: · Follow Standard Work Instructions (verbal &written) · Assemble units by using various hand tools, assembly fixtures, adhesives, and lubricants. · Safely fasten parts and pieces together using specialty machinery and tools. · Ensure compliance with safety protocols during assembly. · Inspect parts and materials used in production to ensure quality. · Inspect each assembled piece for damage, loose screws/bolts, and other defects. · Verify correct quantities of parts and components. Inventory Management: · Maintain accurate records of parts and tools used in the assembly process. · Keep track of inventory levels and report shortages or excesses. · Adherence to Company Procedures · Follow company procedures, directives, and safety guidelines. · Work efficiently and effectively within established processes. · Testing and Verification · Test finished products for defects or malfunctions. · Ensure that assembled products meet quality standards. · Workspace Maintenance · Keep the assembly area clean, organized, and well-maintained. · Properly store and maintain the tools used for assembly. Requirements High school diploma or equivalent preferred. Basic computer knowledge (Microsoft Teams, Excel, Word, etc.) Mechanical knowledge or experience is a plus. Detail-oriented and able to follow technical instructions. Ability to work well with a team and collaborate with other departments. Physical stamina: Able to lift up to 20 lbs and stand / sit for extended periods. Salary Description 17.50

Job Description Electronic Mechanical Assembler About the Role We are seeking an experienced Electronic Mechanical Assembler to join our production team. In this role, you will report directly to the Production Cell Leader and contribute to the assembly of high-quality aerospace components. This is a hands-on position where attention to detail, teamwork, and technical expertise are essential. Key Responsibilities Create assemblies per blueprints and specifications on a daily basis. Identify and mark parts using stamp procedures as required. Maintain accurate and up-to-date documentation within work order packages. Assemble and install electronic components using soldering techniques. Contribute to continuous improvement initiatives and support production targets. Maintain a safe, clean, and healthy work environment by following established work instructions, standards, and procedures. Qualifications High school diploma or equivalent. 2+ years of experience in an aerospace manufacturing environment. Proficiency with common troubleshooting tools such as voltmeters, screwdrivers, and power supplies. Ability to read and interpret blueprints, specifications, and schematics. J-Standard Soldering Certification preferred. Benefits Comprehensive medical insurance. Competitive PTO, holiday pay, and sick leave. Company 401(k) plan with up to 4% matched contribution. Annual bonus program (discretionary, based on company and individual performance). Flexible working arrangements. Paid volunteering opportunities. Access to mental health resources and champions across sites. Ongoing commitment to employee development. Employee referral program.

Job Description Under general supervision, performs a wide variety of electromechanical or mechanical production sub-assembly and assembly operations to build up and assemble difficult and complex instruments. Duties may include following techniques to wire, prepare cable harnesses and install cable harnesses. Perform coating, mixing and cooking of raw materials to create finished products. Essential Job Functions Assembly Activities Under general supervision, performs various tasks requiring knowledge of assembly techniques, tools, materials, machines and equipment. Assembles electromechanical instruments or fabricated parts to make subassemblies or complete instruments using hand tools, power tools and special tools and/or calibration equipment. Determines methods and sequence of assembly operations where complete information is not readily available or follows assembly shop and production operations sheets, wire lists, samples, blue prints, schematics and verbal instructions to perform a wide variety of assembly operations. Fits, aligns, calibrates and adjusts parts and mechanisms to meet tolerances and product operating and quality requirements. Works from engineering drawings, rough sketches, and manuals, verbal or written instructions from Lead Assembler or Supervisor. Performs in-process and final quality inspection of assembled products. Examines drawings and work orders to determine the work that needs to be performed. Utilizes appropriate machines and tools to install, mount, fasten, align and adjust parts, components, wiring and harnesses. Evaluates assembly procedures and manuals and recommends revisions when required. Performs such tasks as replacing components and wiring circuits. Trains new hires and co-workers as necessary to enhance skill level and knowledge base. Examines and tests assembly at various stages of production to identify errors. Maintains a record of the assembly process, progress and problems. Provides feedback to supervisor when a deviation from accepted practice or safety issues are recognized. Utilizes small hand tools such as wire strippers, crimpers, wrenches, screwdrivers, pliers, and hammers. Identifies and selects components to be integrated into sub-assembly and assembly units. Makes own set-ups, alignments and adjustments maintaining tolerance in accordance with instructions. Disassembles, modifies, reworks, refurbishes, reassembles, and tests instruments as required. Clean and coat molds for fixtures and product used. Perform mixing and cooking of gels in a laboratory environment. Other Activities Evaluates and recommends changes in methods and procedures in assigned area of responsibility. Performs data entry on work-in-process transaction and parts ordering. Recommends and implements methods to promote teamwork and maintains a pleasant work environment within department and with other departments. Trains new team members on how to fill out DHR such as batch record and traveler during the production run. Seeks constant improvement in work processes and techniques. Assures that laboratory and assembly areas are in an orderly and functional condition. Suggests improvement in departmental work processes and procedures. Maintains good communications with peers, Lead Assembler and Supervisor. Attends and participates in group meetings, task force groups, etc., as needed. Works with Support Engineering to develop and maintain time standards. Aids Support Engineering with design of assemblies and units for manufacturing capability. Performs other duties and projects as assigned by Supervisor and/or Lead Assembler. Essential Job Requirements Education High school diploma, GED or equivalent education and experience. Experience & Minimum Qualifications 4-6 years of assembly experience in a fast-paced manufacturing environment Ability to follow schematics and assemble wire harnesses is a must. Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals, engineering prints and schematics. Ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions, and decimals using a calculator. Ability to compute rate, ratio and percent, and to draw and interpret bar graphs. Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Ability to use standard power hand tools and custom tools, gauges, and other calibration equipment and assembly fixtures. Ability to lift 25 to 50 pounds is an asset Strong organizational skills through demonstrated ability to multi-task and manage time Established collaboration skills and the ability to communicate with openness and transparency. Ability to comply with FDA Good Manufacturing Practices (GMP). Ability to meet production schedules and project deadlines. Exposure and training to Six Sigma and/or lean manufacturing preferred. Physical Requirements & Working Environment Ability to work safely and according to departmental procedures when working at high temperatures with hazardous equipment and materials such as oven, mixers, hot plates, ultrasonic cleaner, pressure cooker, fume hood, power tools, wire strippers, heat guns, heated cutting blades and others. Ability to work safely and according to departmental procedures when handling volatile chemicals which may or may not be hazardous. Ability to work safely in a chemical laboratory environment. Ability to occasionally lift and/or move up to 50 lbs. Ability to successfully respond to multiple work pressures. Ability to communicate verbally to individuals and groups. Ability to communicate verbally in person and using a phone. Ability to listen for understanding and assisting in problem solving. Ability to regularly use hands to utilize maximum dexterity. Ability to frequently to walk, stand, sit, and reach with hands and arms. Ability to occasionally to stoop, kneel, crouch, or crawl and hear. Specific vision abilities required include close vision, color vision, and ability to adjust focus. "Sakura Finetek USA, Inc. is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex including sexual orientation and gender identity, national origin, disability, protected Veteran Status, or any other characteristic protected by applicable federal, state, or local law.” The above description identifies the essential job functions and skills needed by the person or persons assigned to this position. These job functions and skills are not intended to be a complete and exhaustive list of all responsibilities, duties and skills required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential job functions. The information contained herein is subject to change at the company's discretion.

Masterite Division of DCX-CHOL Enterprises Inc. is seeking experienced Solder Assemblers with the following qualifications: With supervision prepare and solders electronic components onto Printer Circuit Boards (PCBs) according to specifications. Key Performance Indictors: List two to five measurable tasks that are key to indicating the performance level in this role: Perform basic SMT and thru hole hand component soldering per IPC-610 Class 3, J-Std-001 Operate hand and/or automatic tools safely. Lead forming of different types of electronic parts using hand tools and soldering stations on PCB (Printed Circuit Board) assembly. Work with leaded and lead- free solder. Basic ability to read PCB assembly drawings and related documents; ECN's, assembly instructions. Utilize electrical and manual tools such as soldering iron, de-soldering equipment, and solder removal tools. Basic understanding of PCB assembly processes, component installation sequence of thru hole components. Maintains department specific records. Other duties may be assigned. Qualifications and Experience: High School Diploma or equivalent 2+yrs Soldering experience - must have fine pitch and through microscope. (Need to pass Soldering test) Soldering multiple components on a circuit board. Requires excellent speed and accuracy Familiarity with ovens, hot plates, hot air pencil, etc. Soldering Experience per IPC-610 Class 3, J-Std-001. Ability to Read & Interpret Blueprints, Schematics, Traveler/Routers, Bills of Material & Wire Lists. Able to use a microscope to solder for extended periods Dexterity, steady hand to manipulate and position extremely small devices. Must be able to understand and follow verbal instructions and be detailed oriented. Maintain a clean, safe well organized work-station through routine housekeeping. Normal work time spent indoors A neat and tidy personal appearance must be maintained; ◦Occasional periods of high levels of physical exertion needed, this includes heavy lifting (50+ lb.), walking, bending, pushing large loads, carrying, stooping, reaching, etc. DCX-CHOL Enterprises is a privately held American owned Small Business. We are made up of five vertically integrated manufacturing and assembly divisions, each with their own history, specializations and products. Each division compliments the other with their unique skills and products and at the same time, each work together as a vertically integrated team to provide the most cost effective, high-quality interconnect products to our customers on time. ITAR REQUIREMENTS: To conform to U.S. Government space technology export regulations, applicant must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. DCX-CHOL Enterprises Inc. is an Equal Opportunity Employer; employment with DCX-CHOL Enterprises Inc. is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status. DCX-CHOL Enterprises Inc. will provide the Social Security Administration (SSA) and, if necessary, the Department of Homeland Security (DHS), with information from each new employee's Form I-9 to confirm work authorization via E-Verify.

**Be visionary** Teledyne Technologies Incorporated provides enabling technologies for industrial growth markets that require advanced technology and high reliability. These markets include aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, deepwater oil and gas exploration and production, medical imaging and pharmaceutical research. We are looking for individuals who thrive on making an impact and want the excitement of being on a team that wins. **Job Description** **Perform precision rework and assembly for advanced avionics systems!** Teledyne Controls is seeking an experienced Electronic Assembler to join our team. In this role, you'll handle all phases of rework, component replacement, and mechanical assembly for high-performance avionics products. **What you'll do** + Perform fine-pitch soldering and de-soldering of thru-hole and surface mount components. + Crimp wires and assemble harnesses to specification. + Complete mechanical assembly using hand tools for hardware installations. + Build complex electronic assemblies such as harnesses and circuit card assemblies (CCA). + Follow established methods and sequences for assembly operations. + Conduct quality checks throughout the manufacturing process and record production data. + Rework and repair defective units identified by inspection or test personnel. + Operate microscopes for extended periods and use torque tools and measuring devices. **What you need** + High school diploma or GED (required). + Minimum of 3 years of related experience in electronic assembly or equivalent training. + J-STD-001 and IPC-A-610 certification (required). + Ability to read and interpret drawings and assembly instructions. + Strong attention to detail and manual dexterity. + Must be a U.S. Person (includes U.S. citizens, lawful permanent residents, refugees, and asylees) (required). **What we offer** + Competitive pay and comprehensive health benefits. + Medical, dental, vision, and employee assistance programs. + Disability coverage and supplemental insurance options. + 401(k) with company match and employee stock purchase plan. + Paid time off, education assistance, and voluntary benefits like pet insurance. + A collaborative environment focused on quality and innovation. **What happens next** Apply online through Teledyne's careers page. If your qualifications align, our team will contact you for interviews and guide you through the process. _Teledyne is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. Employment is contingent on background checks and compliance with applicable regulations._ **Salary Range:** $44,500.00-$59,300.000 **Pay Transparency** The anticipated salary range listed for this role is only an estimate. Actual compensation for successful candidates is carefully determined based on several factors including, but not limited to, location, education/training, work experience, key skills, and type of position. Teledyne conducts background checks on qualified applicants who receive a conditional offer of employment in accordance with applicable laws, regulations and ordinances. Background checks may include, but are not limited to, education verification, employment history and verification, criminal convictions, Motor Vehicle Report (MVR & driving history), reference check, credit checks/credit history and drug testing. All qualified applicants with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act. Teledyne and all of our employees are committed to conducting business with the highest ethical standards. We require all employees to comply with all applicable laws, regulations, rules and regulatory orders. Our reputation for honesty, integrity and high ethics is as important to us as our reputation for making innovative sensing solutions. Teledyne is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age, or any other characteristic or non-merit based factor made unlawful by federal, state, or local laws. You may not realize it, but Teledyne enables many of the products and services you use every day **.** Teledyne provides enabling technologies to sense, transmit and analyze information for industrial growth markets, including aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, energy, medical imaging and pharmaceutical research.

Job DescriptionElectro-Mechanical AssemblersLocation: Chatsworth, CA Duration: 3 - 6 months or longer Schedule: Monday - Friday, 06:00 AM - 2:30 PM Pay Rate: $23.00 - $25.00 per hour (based on experience) Requirements: Experience performing electrical AND mechanical assembly work Ability to read and understand manufacturing drawings and work instructions Ability to speak, read and write in English Must be capable of using standard tools required for electrical/mechanical assembly (crimpers, torque tools, standard hand tools, etc.) Must be able to work in a fast-paced production environment with minimal supervision

Description Essential Job Functions Assembly Activities Under general supervision, performs various tasks requiring knowledge of assembly techniques, tools, materials, machines and equipment. Assembles electromechanical instruments or fabricated parts to make subassemblies or complete instruments using hand tools, power tools and special tools and/or calibration equipment. Determines methods and sequence of assembly operations where complete information is not readily available or follows assembly shop and production operations sheets, wire lists, samples, blue prints, schematics and verbal instructions to perform a wide variety of assembly operations. Fits, aligns, calibrates and adjusts parts and mechanisms to meet tolerances and product operating and quality requirements. Works from engineering drawings, rough sketches, and manuals, verbal or written instructions from Lead Assembler or Supervisor. Performs in-process and final quality inspection of assembled products. Examines drawings and work orders to determine the work that needs to be performed. Utilizes appropriate machines and tools to install, mount, fasten, align and adjust parts, components, wiring and harnesses. Examines and tests assembly at various stages of production to identify errors. Maintains a record of the assembly process, progress and problems. Provides feedback to supervisor when a deviation from accepted practice or safety issues are recognized. Utilizes small hand tools such as wire strippers, crimpers, wrenches, screwdrivers, pliers, and hammers. Identifies and selects components to be integrated into sub-assembly and assembly units. Makes own set-ups, alignments and adjustments maintaining tolerance in accordance with instructions. Clean and coat molds for fixtures and product used. Perform mixing and cooking of gels in a laboratory environment Other Activities Evaluates and recommends changes in methods and procedures in assigned area of responsibility. Seeks constant improvement in work processes and techniques. Assures that laboratory and assembly areas are in an orderly and functional condition. Suggests improvement in departmental work processes and procedures. Maintains good communications with peers, Lead Assembler and Supervisor. Attends and participates in group meetings, task force groups, etc., as needed. Works with Support Engineering to develop and maintain time standards. Aids Support Engineering with design of assemblies and units for manufacturing capability. Performs other duties and projects as assigned by Supervisor and/or Lead Assembler. Essential Job Requirements Education High school diploma, GED or equivalent education and experience. Experience & Minimum Qualifications 2-3 years of assembly line or warehouse experience in a fast-paced environment Strong computer skills. Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions, and decimals using a calculator. Ability to compute rate, ratio and percent, and to draw and interpret bar graphs. Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Ability to use standard power hand tools and custom tools, gauges, and other calibration equipment and assembly fixtures. Strong organizational skills through demonstrated ability to multi-task and manage time Established collaboration skills and the ability to communicate with openness and transparency. Ability to comply with FDA Good Manufacturing Practices (GMP). Ability to meet production schedules. Exposure and training to Six Sigma and/or lean manufacturing preferred. Physical Requirements & Working Environment Ability to work safely and according to departmental procedures when working with power tools, wire strippers, heat guns, heated cutting blades and others. Ability to work safely and according to departmental procedures when handling volatile chemicals which may or may not be hazardous. Ability to lift 25 to 50 pounds. Ability to successfully respond to multiple work pressures. Ability to communicate verbally to individuals and groups.